diff options
author | Julian Andres Klode <jak@debian.org> | 2016-06-11 17:24:13 +0200 |
---|---|---|
committer | Julian Andres Klode <jak@debian.org> | 2016-06-11 17:25:20 +0200 |
commit | 5ff8dd6bd1c30c29a7398e339d3bdeaffe2f4489 (patch) | |
tree | ccc8ffb9aac27b039e6a6dbf24b7a2fbaa684498 /doc/po/pt.po | |
parent | 8f858d560e3b7b475c623c4e242d1edce246025a (diff) | |
download | apt-5ff8dd6bd1c30c29a7398e339d3bdeaffe2f4489.tar.gz |
Release 1.3~exp21.3_exp2
Diffstat (limited to 'doc/po/pt.po')
-rw-r--r-- | doc/po/pt.po | 180 |
1 files changed, 132 insertions, 48 deletions
diff --git a/doc/po/pt.po b/doc/po/pt.po index 6abf4be4a..bcf2bc16d 100644 --- a/doc/po/pt.po +++ b/doc/po/pt.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: apt-doc 1.0.7\n" "Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n" -"POT-Creation-Date: 2016-05-11 10:50+0200\n" +"POT-Creation-Date: 2016-06-11 17:24+0200\n" "PO-Revision-Date: 2014-08-29 00:34+0100\n" "Last-Translator: Américo Monteiro <a_monteiro@gmx.com>\n" "Language-Team: Portuguese <traduz@debianpt.org>\n" @@ -1594,9 +1594,13 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-get.8.xml +#, fuzzy +#| msgid "" +#| "Show upgraded packages; print out a list of all packages that are to be " +#| "upgraded. Configuration Item: <literal>APT::Get::Show-Upgraded</literal>." msgid "" -"Show upgraded packages; print out a list of all packages that are to be " -"upgraded. Configuration Item: <literal>APT::Get::Show-Upgraded</literal>." +"Do not show a list of all packages that are to be upgraded. Configuration " +"Item: <literal>APT::Get::Show-Upgraded</literal>." msgstr "" "Mostra pacotes actualizados; Escreve uma lista de todos os pacotes que estão " "prestes a ser actualizados. Item de Configuração: <literal>APT::Get::Show-" @@ -2570,11 +2574,10 @@ msgstr "" msgid "" "Per default <command>depends</command> and <command>rdepends</command> print " "only dependencies explicitly expressed in the metadata. With this flag it " -"will also show dependencies implicitly added based on the encountered " -"data. A <literal>Conflicts: foo</literal> e.g. expresses implicitly that " -"this package also conflicts with the package foo from any other " -"architecture. Configuration Item: <literal>APT::Cache::ShowImplicit</" -"literal>." +"will also show dependencies implicitly added based on the encountered data. " +"A <literal>Conflicts: foo</literal> e.g. expresses implicitly that this " +"package also conflicts with the package foo from any other architecture. " +"Configuration Item: <literal>APT::Cache::ShowImplicit</literal>." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> @@ -4042,6 +4045,33 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml msgid "" +"This scope defines which compression formats are supported, how compression " +"and decompression can be performed if support for this format isn't built " +"into apt directly and a cost-value indicating how costly it is to compress " +"something in this format. As an example the following configuration stanza " +"would allow apt to download and uncompress as well as create and store files " +"with the low-cost <literal>.reversed</literal> file extension which it will " +"pass to the command <command>rev</command> without additional commandline " +"parameters for compression and uncompression:" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><informalexample><programlisting> +#: apt.conf.5.xml +#, no-wrap +msgid "" +"APT::Compressor::rev {\n" +"\tName \"rev\";\n" +"\tExtension \".reversed\";\n" +"\tBinary \"rev\";\n" +"\tCompressArg {};\n" +"\tUncompressArg {};\n" +"\tCost \"10\";\n" +"};\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml +msgid "" "List of all build profiles enabled for build-dependency resolution, without " "the \"<literal>profile.</literal>\" namespace prefix. By default this list " "is empty. The <envar>DEB_BUILD_PROFILES</envar> as used by &dpkg-" @@ -4768,14 +4798,23 @@ msgstr "Acquire::CompressionTypes::<replaceable>Extensão de Ficheiro</replaceab #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml +#, fuzzy +#| msgid "" +#| "List of compression types which are understood by the acquire methods. " +#| "Files like <filename>Packages</filename> can be available in various " +#| "compression formats. By default the acquire methods can decompress " +#| "<command>bzip2</command>, <command>lzma</command> and <command>gzip</" +#| "command> compressed files; with this setting more formats can be added on " +#| "the fly or the used method can be changed. The syntax for this is: " +#| "<placeholder type=\"synopsis\" id=\"0\"/>" msgid "" "List of compression types which are understood by the acquire methods. " "Files like <filename>Packages</filename> can be available in various " -"compression formats. By default the acquire methods can decompress " -"<command>bzip2</command>, <command>lzma</command> and <command>gzip</" -"command> compressed files; with this setting more formats can be added on " -"the fly or the used method can be changed. The syntax for this is: " -"<placeholder type=\"synopsis\" id=\"0\"/>" +"compression formats. By default the acquire methods can decompress and " +"recompress many common formats like <command>xz</command> and <command>gzip</" +"command>; with this scope the supported formats can be queried, modified as " +"well as support for more formats added (see also <option>APT::Compressor</" +"option>). The syntax for this is: <placeholder type=\"synopsis\" id=\"0\"/>" msgstr "" "Lista dos tipos de compressão que são compreendidos pelos métodos de " "aquisição. Ficheiros como <filename>Packages</filename> podem estar " @@ -4793,26 +4832,41 @@ msgstr "Acquire::CompressionTypes::Order:: \"gz\";" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis> #: apt.conf.5.xml -#, no-wrap -msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" +#, fuzzy, no-wrap +#| msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" +msgid "Acquire::CompressionTypes::Order { \"xz\"; \"gz\"; };" msgstr "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml +#, fuzzy +#| msgid "" +#| "Also, the <literal>Order</literal> subgroup can be used to define in " +#| "which order the acquire system will try to download the compressed files. " +#| "The acquire system will try the first and proceed with the next " +#| "compression type in this list on error, so to prefer one over the other " +#| "type simply add the preferred type first - default types not already " +#| "added will be implicitly appended to the end of the list, so e.g. " +#| "<placeholder type=\"synopsis\" id=\"0\"/> can be used to prefer " +#| "<command>gzip</command> compressed files over <command>bzip2</command> " +#| "and <command>lzma</command>. If <command>lzma</command> should be " +#| "preferred over <command>gzip</command> and <command>bzip2</command> the " +#| "configure setting should look like this: <placeholder type=\"synopsis\" " +#| "id=\"1\"/> It is not needed to add <literal>bz2</literal> to the list " +#| "explicitly as it will be added automatically." msgid "" "Also, the <literal>Order</literal> subgroup can be used to define in which " "order the acquire system will try to download the compressed files. The " "acquire system will try the first and proceed with the next compression type " "in this list on error, so to prefer one over the other type simply add the " -"preferred type first - default types not already added will be implicitly " -"appended to the end of the list, so e.g. <placeholder type=\"synopsis\" id=" -"\"0\"/> can be used to prefer <command>gzip</command> compressed files over " -"<command>bzip2</command> and <command>lzma</command>. If <command>lzma</" -"command> should be preferred over <command>gzip</command> and " -"<command>bzip2</command> the configure setting should look like this: " -"<placeholder type=\"synopsis\" id=\"1\"/> It is not needed to add " -"<literal>bz2</literal> to the list explicitly as it will be added " -"automatically." +"preferred type first - types not already added will be implicitly appended " +"to the end of the list, so e.g. <placeholder type=\"synopsis\" id=\"0\"/> " +"can be used to prefer <command>gzip</command> compressed files over all " +"other compression formats. If <command>xz</command> should be preferred " +"over <command>gzip</command> and <command>bzip2</command> the configure " +"setting should look like this: <placeholder type=\"synopsis\" id=\"1\"/> It " +"is not needed to add <literal>bz2</literal> to the list explicitly as it " +"will be added automatically." msgstr "" "Também o subgrupo <literal>Order</literal> pode ser usado para definir em " "que ordem o sistema de aquisição irá tentar descarregar os ficheiros " @@ -4837,17 +4891,30 @@ msgstr "Dir::Bin::bzip2 \"/bin/bzip2\";" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml +#, fuzzy +#| msgid "" +#| "Note that the <literal>Dir::Bin::<replaceable>Methodname</replaceable></" +#| "literal> will be checked at run time. If this option has been set, the " +#| "method will only be used if this file exists; e.g. for the " +#| "<literal>bzip2</literal> method (the inbuilt) setting is: <placeholder " +#| "type=\"literallayout\" id=\"0\"/> Note also that list entries specified " +#| "on the command line will be added at the end of the list specified in the " +#| "configuration files, but before the default entries. To prefer a type in " +#| "this case over the ones specified in the configuration files you can set " +#| "the option direct - not in list style. This will not override the " +#| "defined list; it will only prefix the list with this type." msgid "" "Note that the <literal>Dir::Bin::<replaceable>Methodname</replaceable></" -"literal> will be checked at run time. If this option has been set, the " -"method will only be used if this file exists; e.g. for the <literal>bzip2</" -"literal> method (the inbuilt) setting is: <placeholder type=\"literallayout" -"\" id=\"0\"/> Note also that list entries specified on the command line will " -"be added at the end of the list specified in the configuration files, but " -"before the default entries. To prefer a type in this case over the ones " -"specified in the configuration files you can set the option direct - not in " -"list style. This will not override the defined list; it will only prefix " -"the list with this type." +"literal> will be checked at run time. If this option has been set and " +"support for this format isn't directly built into apt, the method will only " +"be used if this file exists; e.g. for the <literal>bzip2</literal> method " +"(the inbuilt) setting is: <placeholder type=\"literallayout\" id=\"0\"/> " +"Note also that list entries specified on the command line will be added at " +"the end of the list specified in the configuration files, but before the " +"default entries. To prefer a type in this case over the ones specified in " +"the configuration files you can set the option direct - not in list style. " +"This will not override the defined list; it will only prefix the list with " +"this type." msgstr "" "Note que o <literal>Dir::Bin::<replaceable>nome de método</replaceable></" "literal> será verificado em tempo de execução. Se esta definição estiver " @@ -8603,14 +8670,15 @@ msgstr "" msgid "" "The <literal>release</literal> command generates a Release file from a " "directory tree. It recursively searches the given directory for uncompressed " -"<filename>Packages</filename> and <filename>Sources</filename> files and " -"ones compressed with <command>gzip</command>, <command>bzip2</command> or " -"<command>lzma</command> as well as <filename>Release</filename> and " -"<filename>md5sum.txt</filename> files by default (<literal>APT::FTPArchive::" -"Release::Default-Patterns</literal>). Additional filename patterns can be " -"added by listing them in <literal>APT::FTPArchive::Release::Patterns</" -"literal>. It then writes to stdout a <filename>Release</filename> file " -"containing (by default) an MD5, SHA1, SHA256 and SHA512 digest for each file." +"and compressed <filename>Packages</filename>, <filename>Sources</filename>, " +"<filename>Contents</filename>, <filename>Components</filename> and " +"<filename>icons</filename> files as well as <filename>Release</filename>, " +"<filename>Index</filename> and <filename>md5sum.txt</filename> files by " +"default (<literal>APT::FTPArchive::Release::Default-Patterns</literal>). " +"Additional filename patterns can be added by listing them in <literal>APT::" +"FTPArchive::Release::Patterns</literal>. It then writes to stdout a " +"<filename>Release</filename> file containing (by default) an MD5, SHA1, " +"SHA256 and SHA512 digest for each file." msgstr "" "O comando <literal>release</literal> gera um ficheiro Release a partir de " "uma árvore de directórios. Por predefinição, procura recursivamente no " @@ -8624,15 +8692,25 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-ftparchive.1.xml +#, fuzzy +#| msgid "" +#| "Values for the additional metadata fields in the Release file are taken " +#| "from the corresponding variables under <literal>APT::FTPArchive::Release</" +#| "literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The " +#| "supported fields are: <literal>Origin</literal>, <literal>Label</" +#| "literal>, <literal>Suite</literal>, <literal>Version</literal>, " +#| "<literal>Codename</literal>, <literal>Date</literal>, <literal>Valid-" +#| "Until</literal>, <literal>Architectures</literal>, <literal>Components</" +#| "literal>, <literal>Description</literal>." msgid "" "Values for the additional metadata fields in the Release file are taken from " "the corresponding variables under <literal>APT::FTPArchive::Release</" -"literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The " -"supported fields are: <literal>Origin</literal>, <literal>Label</literal>, " +"literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The " +"supported fields are <literal>Origin</literal>, <literal>Label</literal>, " "<literal>Suite</literal>, <literal>Version</literal>, <literal>Codename</" "literal>, <literal>Date</literal>, <literal>Valid-Until</literal>, " -"<literal>Architectures</literal>, <literal>Components</literal>, " -"<literal>Description</literal>." +"<literal>Signed-By</literal>, <literal>Architectures</literal>, " +"<literal>Components</literal> and <literal>Description</literal>." msgstr "" "Valores para os campos de metadados adicionais no ficheiro Release são " "tomados a partir das variáveis correspondentes sob <literal>APT::FTPArchive::" @@ -8764,11 +8842,17 @@ msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> #: apt-ftparchive.1.xml +#, fuzzy +#| msgid "" +#| "Sets the default compression schemes to use for the package index files. " +#| "It is a string that contains a space separated list of at least one of: " +#| "'.' (no compression), 'gzip' and 'bzip2'. The default for all compression " +#| "schemes is '. gzip'." msgid "" "Sets the default compression schemes to use for the package index files. It " -"is a string that contains a space separated list of at least one of: '.' (no " -"compression), 'gzip' and 'bzip2'. The default for all compression schemes is " -"'. gzip'." +"is a string that contains a space separated list of at least one of the " +"compressors configured via the <option>APT::Compressor</option> " +"configuration scope. The default for all compression schemes is '. gzip'." msgstr "" "Define os esquemas de compressão predefinidos a usar para os ficheiros de " "índice Package. É uma string que contém uma lista separada por espaços de " |