Hiding files on a CD ===================== This document attempts to show how to hide files from being seen by an operating system accessing a CD as an ISO9660/Rock Ridge, Joliet or HFS CD. It also highlights some of the limitations ... Note: this document is about the various -hide options - not be confused with the -hidden options. The -hidden options set the 'EXISTENCE' bit in the directory entry which means the file or directory will be invisible - unless some special option is used to mount or view the CD - Linux has the 'unhide' mount option to make these files visible. i.e. the directory entry exists on the CD. With hindsight, to avoid confusion with the -hidden option, it would have been better to chose an option name like '-omit' instead of '-hide'... The various -hide options actually exclude the relevant directory entry from the directory tree. Therefore, it is not possible to access a file or directory that has be hidden with the -hide option when the ISO9600/Rock Ridge directory is mounted - because the directory entry does not exist on the CD (but the file data does). You would probably be able to access this file or directory when mounted as a Joliet or HFS CD (depending on other options used). Similarly, a directory entry hidden with the -hide-joliet option will not be accessible when mounted as an Joliet CD. Similarly for -hide-hfs etc. If you don't want a file or directory to appear on the CD at all, then use the -exclude options, not the -hide options (genisoimage completely ignores any file/directory excluded with the -exclude options). Using the hide options ====================== There are 6 hide options: -hide Hide a file/directory from the ISO9660/Rock Ridge directory -hide-list As above, but read file names from a file -hide-joliet Hide a file/directory from the Joliet directory -hide-joliet-list As above, but read file names from a file -hide-hfs Hide a file/directory from the HFS directory -hide-hfs-list As above, but read file names from a file You can use the -hide, -hide-joliet and/or -hide-hfs options as many times as you like on the command line, but if you have many files to hide, then it may be better to put your file names in a file (one per line) and use the corresponding 'list' option. You can also use the three -hide-list options as many times as you want. The arguments to the -hide options are either the 'basename' or the 'whole path name' of a file. That is, if you use the option: % genisoimage -hide ABC [-other-options] CD_directory then any file with the name ABC will be hidden. If you want to be more specific, then use the whole name - as seen by genisoimage e.g.: % genisoimage -hide CD_directory/XYZ/ABC [-other-options] CD_directory will hide just the file 'CD_directory/XYZ/ABC' - not any other file called 'ABC' that might exist under 'CD_directory'. However, if your command line is like: % genisoimage -hide CD_directory/XYZ/ABC [-other-options] ./CD_directory Then the file 'CD_directory/XYZ/ABC' will not be hidden because as far as genisoimage is concerned. Its whole path is actually './CD_directory/XYZ/ABC'. You can use wild cards in the -hide arguments. If the file name to be hidden is a directory, then the directory and all its contents are hidden. The main use of the hide options is on a multi platform (hybrid CD) to hide various files/directories that are operating system specific from been seen on the CD when mounted on another OS. i.e. You may want to hide Macintosh executables from being seen when the CD is mounted as a Joliet CD on a PC etc. For example, say we want to create a ISO9660/Rock Ridge, Joliet, HFS hybrid CD from files/directories in the directory called 'cd_dir' - which are: MAC/ MAC/app MAC/data/ MAC/data/file1 PC/ PC/app PC/data/ PC/data/file1 UNIX/ UNIX/app UNIX/data UNIX/data/file1 COMMON/ COMMON/some_files We could use the command line: % genisoimage -r -J -hfs -hide MAC -hide PC -hide-joliet MAC \ -hide-joliet UNIX -hide-hfs PC -hide-hfs UNIX -o cd.iso cd_dir This will give a CD that when mounted as a Rock Ridge CD, you will only see the directories UNIX and COMMON, as a Joliet CD the directories PC and COMMON, and as an HFS CD the directories MAC and COMMON. If you also had the three files in the current directory called README.hfs, README.joliet and README.unix - but you wanted to have each of these files appear as just 'README' when mounted, then you could use the above command line with the following: % genisoimage -r -J -hfs -graft-points -hide MAC -hide PC -hide-joliet MAC \ -hide-joliet UNIX -hide-hfs PC -hide-hfs UNIX \ -hide README.hfs -hide README.joliet -hide-joliet README.hfs \ -hide-joliet README.uni -hide-hfs README.joliet -hide-hfs README.unix \ README=README.hfs README=README.joliet README=README.unix \ -o cd.iso cd_dir Note: we've used the -graft-points option as we're using the '=' syntax to insert the files called README.hfs, README.joliet and README.unix as 'README' The resulting CD when mounted as a Rock Ridge CD, will have the directories UNIX and COMMON - with the file called README - which was originally called README.unix. However, in most circumstances, it would be better to have the contents of each of the OS specific directories (plus the contents of the COMMON directory) to appear at the top level of the CD. i.e. when the CD is mounted (as ISO9660/Rock Ridge, Joliet or HFS) it has the contents: README app data/file1 some_files Unfortunately, this is not as straight forward as it may seem - i.e. doing the following may seem OK, but it won't work - for reasons I'll explain later: It gets a bit messy using the -graft-points syntax above, so we'll assume each of the MAC, UNIX and PC directories contain the correct README, We'll also change to the 'cd_dir' directory and use the command: genisoimage -r -J -hfs -hide MAC -hide PC -hide-joliet MAC \ -hide-joliet UNIX -hide-hfs PC -hide-hfs UNIX \ -o cd.iso MAC PC UNIX COMMON You will get errors like: genisoimage: Error: UNIX/README and MAC/README have the same Rock Ridge name ... genisoimage: Unable to sort directory This is because you can not hide "pathspecs" that are directories ("pathspecs" are file names given on the command line, or in a path-list file). This a "feature" of genisoimage. In this case nothing is actually hidden at all. So you might think that the following may work: genisoimage -r -J -hfs -hide "MAC/*" -hide "PC/*" -hide-joliet "MAC/*" \ -hide-joliet "UNIX/*" -hide-hfs "PC/*" -hide-hfs "UNIX/*" \ -o cd.iso MAC PC UNIX COMMON which may appear to work - but when the CD is mounted as an ISO9660/Rock Ridge or Joliet CD, then the directory "data" is missing. Again this is a feature of genisoimage - the directories PC/data and UNIX/data are mapped by genisoimage to the same output directory called "/data" - the various "hide" flags are stored with this directory info - in this case as the output directory "/data" is first hidden from the ISO9660/Rock Ridge and then the Joliet directory, the net result is that "/data" gets hidden from both directories ... the way genisoimage hides HFS directories is slightly different, so in this case the directory "data" exists on the HFS volume and contains the correct contents. However, it is possible to obtain the required result, but we have to be careful about hiding multiple input directories that map to a single output directory. To do this we have to hide just the files in these directories (or more accurately, all the non-directories). This is best done by using lists of files to hide for example: find PC -type f -print > pc.list find UNIX -type f -print > unix.list find MAC -type f -print > mac.list genisoimage -r -J -hfs -hide-list pc.list -hide-list mac.list \ -hide-joliet-list unix.list -hide-joliet-list mac.list \ -hide-hfs-list pc.list -hide-hfs-list unix.list \ -o cd.iso MAC PC UNIX COMMON i.e. instead of trying to hide a directory and letting genisoimage hide its contents, we explicitly hide all the files in the directory, but not the directory and any of its sub-directories. This will work for the above input files, but if your directory trees contain symbolic links and/or directories that will not get merged, then the hide lists will have to be tailored to get the required result. James Pearson 22-Nov-2001 Any comments/problems to j.pearson@ge.ucl.ac.uk Modified for cdrkit/genisoimage by Eduard Bloch, Wed, 27 Dec 2006