r104: Initial Import

1 files changed, 248 insertions, 0 deletions

diff --git a/Dh_Lib.pm b/Dh_Lib.pm
new file mode 100644
index 00000000..c9b964c1
--- /dev/null
+++ b/Dh_Lib.pm
@@ -0,0 +1,248 @@
+#!/usr/bin/perl -w
+#
+# Library functions for debhelper programs, perl version.
+#
+# Joey Hess, GPL copyright 1997, 1998.
+
+package Dh_Lib;
+
+use Exporter;
+use vars qw(%dh);
+@ISA=qw(Exporter);
+@EXPORT=qw(&init &doit &complex_doit &verbose_print &error &warning &tmpdir
+	    &pkgfile &pkgext &isnative &autoscript &filearray &GetPackages
+	    %dh);
+
+sub init {
+	# Check to see if an argument on the command line starts with a dash.
+	# if so, we need to pass this off to the resource intensive Getopt::Long,
+	# which I'd prefer to avoid loading at all if possible.
+	my $parseopt=undef;
+	foreach $arg (@ARGV) {
+		if ($arg=~m/^-/) {
+			$parseopt=1;
+			last;
+		}       
+	}
+	if ($parseopt) {
+		eval "use Dh_Getopt";
+		error($!) if $@;
+		%dh=Dh_Getopt::parseopts();
+	}
+
+	# Get the name of the main binary package (first one listed in
+	# debian/control).
+	my @allpackages=GetPackages();
+	$dh{MAINPACKAGE}=$allpackages[0];
+
+	# Check if packages to build have been specified, if not, fall back to 
+	# the default, doing them all.
+	if (! @{$dh{DOPACKAGES}}) {
+		if ($dh{DH_DOINDEP} || $dh{DH_DOARCH}) {
+			error("I have no package to build.");
+		}
+		push @{$dh{DOPACKAGES}},@allpackages;
+	}
+
+	# Check to see if -P was specified. If so, we can only act on a single
+	# package.
+	if ($dh{TMPDIR} || $#{$dh{DOPACKAGES}} > 0) {
+		error("-P was specified, but multiple packages would be acted on.");
+	}
+
+	# Figure out which package is the first one we were instructed to build.
+	# This package gets special treatement: files and directories specified on
+	# the command line may affect it.
+	$dh{FIRSTPACKAGE}=${$dh{DOPACKAGES}}[0];
+}
+
+# Run a command, and display the command to stdout if verbose mode is on.
+# All commands that modifiy files in $TMP should be ran via this 
+# function.
+#
+# Note that this cannot handle complex commands, especially anything
+# involving redirection. Use complex_doit instead.
+sub doit {
+	verbose_print(join(" ",,@_));
+	
+	if (! $dh{NO_ACT}) {
+		system(@_) == 0
+			|| error("command returned error code");
+		
+	}
+}
+
+# This is an identical command to doit, except the parameters passed to it
+# can include complex shell stull like redirection and compound commands.
+sub complex_doit {
+	error("complex_doit() not yet supported");
+}
+
+# Print something if the verbose flag is on.
+sub verbose_print { my $message=shift;
+	if ($dh{VERBOSE}) {
+		print "\t$message\n";
+	}
+}
+
+# Output an error message and exit.
+sub error { my $message=shift;
+	warning($message);
+	exit 1;
+}
+
+# Output a warning.
+sub warning { my $message=shift;
+	my $fn=$0;
+	$fn=~s:.*/(.*?):$1:;
+	print STDERR "$fn: $message\n";
+}
+
+# Pass it a name of a binary package, it returns the name of the tmp dir to
+# use, for that package.
+# This is for back-compatability with the debian/tmp tradition.
+sub tmpdir { my $package=shift;
+	if ($dh{TMPDIR}) {
+		return $dh{TMPDIR};
+	}
+	elsif ($package eq $dh{MAINPACKAGE}) {
+		return "debian/tmp";
+	}
+	else {
+		return "debian/$package";
+	}
+}
+
+# Pass this the name of a binary package, and the name of the file wanted
+# for the package, and it will return the actual filename to use. For
+# example if the package is foo, and the file is somefile, it will look for
+# debian/somefile, and if found return that, otherwise, if the package is
+# the main package, it will look for debian/foo, and if found, return that.
+# Failing that, it will return nothing.
+sub pkgfile { my $package=shift; my $filename=shift;
+	if (-e "debian/$package.$filename") {
+		return "debian/$package.$filename";
+	}
+	elsif ($package eq $dh{MAINPACKAGE} && -e "debian/$filename") {
+		return "debian/$filename";
+	}
+	return "";
+}
+
+# Pass it a name of a binary package, it returns the name to prefix to files
+# in debian for this package.
+sub pkgext { my $package=shift;
+	if ($package ne $MAINPACKAGE) {
+		return "$package.";
+	}
+	return "";
+}
+
+# Returns 1 if the package is a native debian package, null otherwise.
+# As a side effect, sets $dh{VERSION} to the version of this package.
+{
+	# Caches return code so it only needs to run dpkg-parsechangelog once.
+	my $isnative_cache;
+	
+	sub isnative { my $package=shift;
+		if ($isnative_cache eq undef) {
+			# Make sure we look at the correct changelog.
+			my $isnative_changelog=pkgfile($package,"changelog");
+			if (! $isnative_changelog) {
+				$isnative_changelog="debian/changelog";
+			}
+			
+			# Get the package version.
+			my $version=`dpkg-parsechangelog -l$isnative_changelog`;
+			($dh{VERSION})=$version=~s/[^|\n]Version: \(.*\)\n//m;
+	
+			# Is this a native Debian package?
+			if ($dh{VERSION}=~m/.*-/) {
+				$isnative_cache=1;
+			}
+			else {
+				$isnative_cache=0;
+			}
+		}
+	
+		return $isnative_cache;
+	}
+}
+
+# Automatically add a shell script snippet to a debian script.
+# Only works if the script has #DEBHELPER# in it.
+#
+# Parameters:
+# 1: script to add to
+# 2: filename of snippet
+# 3: sed commands to run on the snippet. Ie, s/#PACKAGE#/$PACKAGE/
+sub autoscript {
+	error "autoscript() not yet implemented (lazy, lazy!)";
+#	autoscript_script=$1
+#	autoscript_filename=$2
+#	autoscript_sed=$3
+#	autoscript_debscript=debian/`pkgext $PACKAGE`$autoscript_script.debhelper
+#
+#	if [ -e "$DH_AUTOSCRIPTDIR/$autoscript_filename" ]; then
+#		autoscript_filename="$DH_AUTOSCRIPTDIR/$autoscript_filename"
+#	else
+#		if [ -e "/usr/lib/debhelper/autoscripts/$autoscript_filename" ]; then
+#			autoscript_filename="/usr/lib/debhelper/autoscripts/$autoscript_filename"
+#		else
+#			error "/usr/lib/debhelper/autoscripts/$autoscript_filename does not exist"
+#		fi
+#	fi
+#
+#	complex_doit "echo \"# Automatically added by `basename $0`\" >> $autoscript_debscript"
+#	complex_doit "sed \"$autoscript_sed\" $autoscript_filename >> $autoscript_debscript"
+#	complex_doit "echo '# End automatically added section' >> $autoscript_debscript"
+}
+
+# Reads in the specified file, one word at a time, and returns an array of
+# the result.
+sub filearray { $file=shift;
+	my @ret;
+	open (DH_FARRAY_IN,"<$file") || error("cannot read $file: $1");
+	while (<DH_FARRAY_IN>) {
+		push @ret,split(/\s/,$_);
+	}
+	close DH_ARRAY;
+	
+	return @ret;
+}
+
+# Returns a list of packages in the control file.
+# Must pass "arch" or "indep" to specify arch-dependant or -independant
+# packages. If nothing is specified, returns all packages.
+sub GetPackages { $type=shift;
+	my $package;
+	my $arch;
+	my @list;
+	open (CONTROL,"<debian/control") || 
+		error("cannot read debian/control: $!\n");
+	while (<CONTROL>) {
+		chomp;
+		s/\s+$//;
+		if (/^Package:\s+(.*)/) {
+			$package=$1;
+		}
+		if (/^Architecture:\s+(.*)/) {
+			$arch=$1;
+		}
+		if (!$_ or eof) { # end of stanza.
+			if ($package &&
+			    (($type eq 'indep' && $arch eq 'all') ||
+			     ($type eq 'arch' && $arch ne 'all') ||
+			     ! $type)) {
+				push @list, $package;
+				undef $package;
+				undef $arch;
+			}
+		}
+	}
+	close CONTROL;
+
+	return @list;
+}
+
+1