path: root/dh

#!/usr/bin/perl -w

=head1 NAME

dh - debhelper command sequencer

=cut

use strict;
use Debian::Debhelper::Dh_Lib;

=head1 SYNOPSIS

B<dh> sequence [B<--with> I<addon>[,I<addon>,...]] [B<--list>] [B<--until> I<cmd>] [B<--before> I<cmd>] [B<--after> I<cmd>] [B<--remaining>] [S<I<debhelper options>>]

=head1 DESCRIPTION

dh runs a sequence of debhelper commands. The supported sequences
correspond to the targets of a debian/rules file: "build", "clean",
"install", "binary-arch", "binary-indep", and "binary".

Commands in the binary-indep sequence are passed the "-i" option to ensure
they only work on binary independent packages, and commands in the
binary-arch sequences are passed the "-a" option to ensure they only work
on architecture dependent packages.

Each debhelper command will record when it's successfully run in
debian/package.debhelper.log. (Which dh_clean deletes.) So dh can tell
which commands have already been run, for which packages, and skip running
those commands again.

Each time dh is run, it examines the log, and finds the last logged command
that is in the specified sequence. It then continues with the next command
in the sequence. The B<--until>, B<--before>, B<--after>, and B<--remaining>
options can override this behavior.

If debian/rules contains a target with a name like "override_I<dh_command>",
then when it gets to that command in the sequence, dh will run that
target from the rules file, rather than running the actual command. The
override target can then run the command with additional options, or run
entirely different commands instead. (Note that to use this feature,
you should Build-Depend on debhelper 7.0.50 or above.)

=head1 OPTIONS

=over 4

=item B<--with> I<addon>[,I<addon>,...]

Add the debhelper commands specified by the given addon to appropriate places
in the sequence of commands that is run. This option can be repeated more
than once, or multiple addons can be listed, separated by commas.
This is used when there is a third-party package that provides
debhelper commands. See the PROGRAMMING file for documentation about
the sequence addon interface.

=item B<--without> I<addon>

The inverse of --with, disables using the given addon.

=item B<--list>, B<-l>

List all available addons.

=item B<--until> I<cmd>

Run commands in the sequence until and including I<cmd>, then stop.

=item B<--before> I<cmd>

Run commands in the sequence before I<cmd>, then stop.

=item B<--after> I<cmd>

Run commands in the sequence that come after I<cmd>.

=item B<--remaining>

Run all commands in the sequence that have yet to be run.

=item B<--no-act>

Prints commands that would run for a given sequence, but does not run them.

=back

All other options passed to dh are passed on to each command it runs. This
can be used to set an option like "-v" or "-X" or "-N", as well as for more
specialised options.

=head1 COMMAND SPECIFICATION

I<cmd> can be a full name of a debhelper command, or a substring. It'll first
search for a command in the sequence exactly matching the name, to avoid any
ambiguity. If there are multiple substring matches, the last one in the
sequence will be used.

=cut

sub command_pos {
	my $command=shift;
	my @sequence=@_;

	foreach my $i (0..$#sequence) {
		if ($command eq $sequence[$i]) {
			return $i;
		}
	}

	my @matches;
	foreach my $i (0..$#sequence) {
		if ($sequence[$i] =~ /\Q$command\E/) {
			push @matches, $i;
		}
	}
	if (! @matches) {
		error "command specification \"$command\" does not match any command in the sequence"
	}
	else {
		return pop @matches;
	}
}

=head1 EXAMPLES

To see what commands are included in a sequence, without actually doing
anything:

	dh binary-arch --no-act

This is a very simple rules file, for packages where the default sequences of
commands work with no additional options.

	#!/usr/bin/make -f
	%:
		dh $@

Often you'll want to pass an option to a specific debhelper command. The
easy way to do with is by adding an override target for that command.
	
	#!/usr/bin/make -f
	%:
		dh $@

	override_dh_strip:
		dh_strip -Xfoo
		
	override_dh_installdocs:
		dh_installdocs README TODO

Sometimes the automated dh_auto_configure and dh_auto_build can't guess
what to do for a strange package. Here's how to avoid running either
and instead run your own commands.

	#!/usr/bin/make -f
	%:
		dh $@

	override_dh_auto_configure:
		./mondoconfig

	override_dh_auto_build:
		make universe-explode-in-delight

Another common case is wanting to do something manually before or
after a particular debhelper command is run.

	#!/usr/bin/make -f
	%:
		dh $@

	override_dh_fixperms:
		dh_fixperms
		chmod 4755 debian/foo/usr/bin/foo

If your package is a python package, dh will use dh_pysupport by
default. This is how to use dh_pycentral instead.

	#!/usr/bin/make -f
	%:
		dh --with python-central $@

To patch your package using quilt, you can tell dh to use quilt's dh
sequence addons like this:
	
	#!/usr/bin/make -f
	%:
		dh --with quilt $@

Here is an example of overriding where the dh_auto_* commands find
the package's source, for a package where the source is located in a
subdirectory. It also forces use of perl's Module::Build build system,
which can be necessary if debhelper wrongly detects that the package
uses MakeMaker.

	#!/usr/bin/make -f
	%:
		dh --sourcedirectory=src --buildsystem=perl_build $@

=cut

# Stash this away before init modifies it.
my @ARGV_orig=@ARGV;

# python-support is enabled by default, at least for now
# (and comes first so python-central loads later and can disable it).
unshift @ARGV, "--with=python-support";
		
# Disable complaints about unknown options for both dh and the commands
# it runs. This is done because dh accepts and passes on options that may
# be specific to only some debhelper commands.
$ENV{DH_IGNORE_UNKNOWN_OPTIONS}=1;

init(options => {
	"until=s" => \$dh{UNTIL},
	"after=s" => \$dh{AFTER},
	"before=s" => \$dh{BEFORE},
	"remaining" => \$dh{REMAINING},
	"with=s" => sub {
		my ($option,$value)=@_;
		push @{$dh{WITH}},split(",", $value);
	},
	"without=s" => sub {
		my ($option,$value)=@_;
		@{$dh{WITH}} = grep { $_ ne $value } @{$dh{WITH}};
	},
	"l" => \$dh{LIST},
	"list" => \$dh{LIST},
});
inhibit_log();

# If make is using a jobserver, but it is not available
# to this process, clean out MAKEFLAGS. This avoids
# ugly warnings when calling make.
if (is_make_jobserver_unavailable()) {
	clean_jobserver_makeflags();
}

# Definitions of sequences.
my %sequences;
$sequences{build} = [qw{
	dh_testdir
	dh_auto_configure
	dh_auto_build
	dh_auto_test
}],
$sequences{clean} = [qw{
	dh_testdir
	dh_auto_clean
	dh_clean
}];
$sequences{install} = [@{$sequences{build}}, qw{
	dh_testroot
	dh_prep
	dh_installdirs
	dh_auto_install

	dh_install
	dh_installdocs
	dh_installchangelogs
	dh_installexamples
	dh_installman

	dh_installcatalogs
	dh_installcron
	dh_installdebconf
	dh_installemacsen
	dh_installifupdown
	dh_installinfo
	dh_installinit
	dh_installmenu
	dh_installmime
	dh_installmodules
	dh_installlogcheck
	dh_installlogrotate
	dh_installpam
	dh_installppp
	dh_installudev
	dh_installwm
	dh_installxfonts
	dh_bugfiles
	dh_lintian
	dh_gconf
	dh_icons
	dh_perl
	dh_usrlocal

	dh_link
	dh_compress
	dh_fixperms
}];
my @b=qw{
	dh_installdeb
	dh_gencontrol
	dh_md5sums
	dh_builddeb
};
$sequences{'binary-indep'} = [@{$sequences{install}}, @b];
$sequences{binary} = [@{$sequences{install}}, qw{
	dh_strip
	dh_makeshlibs
	dh_shlibdeps
}, @b];
$sequences{'binary-arch'} = [@{$sequences{binary}}];

# Additional command options
my %command_opts;

# sequence addon interface
sub _insert {
	my $offset=shift;
	my $existing=shift;
	my $new=shift;
	foreach my $sequence (keys %sequences) {
		my @list=@{$sequences{$sequence}};
		next unless grep $existing, @list;
		my @new;
		foreach my $command (@list) {
			if ($command eq $existing) {
				push @new, $new if $offset < 0;
				push @new, $command;
				push @new, $new if $offset > 0;
			}
			else {
				push @new, $command;
			}
		}
		$sequences{$sequence}=\@new;
	}
}
sub insert_before {
	_insert(-1, @_);
}
sub insert_after {
	_insert(1, @_);
}
sub remove_command {
	my $command=shift;
	foreach my $sequence (keys %sequences) {
		$sequences{$sequence}=[grep { $_ ne $command } @{$sequences{$sequence}}];
	}
	
}
sub add_command {
	my $command=shift;
	my $sequence=shift;
	unshift @{$sequences{$sequence}}, $command;
}
sub add_command_options {
	my $command=shift;
	push @{$command_opts{$command}}, @_;
}
sub remove_command_options {
	my $command=shift;
	if (@_) {
		# Remove only specified options
		if (my $opts = $command_opts{$command}) {
			foreach my $opt (@_) {
				$opts = [ grep { $_ ne $opt } @$opts ];
			}
			$command_opts{$command} = $opts;
		}
	}
	else {
		# Clear all additional options
		delete $command_opts{$command};
	}
}

if ($dh{LIST}) {
	my %addons;

	for my $inc (@INC) {
		eval q{use File::Spec};
		my $path = File::Spec->catdir($inc, "Debian/Debhelper/Sequence");
		if (-d $path) {
			for my $module_path (glob "$path/*.pm") {
				my $name = basename($module_path);
				$name =~ s/\.pm$//;
				$name =~ s/_/-/g;
				$addons{$name} = 1;
			}
		}
	}

	for my $name (sort keys %addons) {
		print "$name\n";
	}

	exit 0;
}

foreach my $addon (@{$dh{WITH}}) {
	my $mod="Debian::Debhelper::Sequence::$addon";
	$mod=~s/-/_/g;
	eval "use $mod";
	if ($@) {
		error("unable to load addon $addon: $@");
	}
}

# Get the sequence of commands to run.
if (! @ARGV) {
	error "specify a sequence to run";
}
my $sequence=shift;
if ($sequence eq 'debian/rules' ||
    $sequence =~ /^override_dh_/) {
	# make -B causes the rules file to be run as a target
	# and support completly empty override targets
	exit 0
}	
elsif (! exists $sequences{$sequence}) {
	error "Unknown sequence $sequence (choose from: ".
		join(" ", sort keys %sequences).")";
}
my @sequence=@{$sequences{$sequence}};

# The list of all packages that can be acted on.
my @packages=@{$dh{DOPACKAGES}};

# Get the options to pass to commands in the sequence.
# Filter out options intended only for this program.
my @options;
if ($sequence eq 'binary-arch') {
	push @options, "-a";
	# as an optimisation, remove from the list any packages
	# that are not arch dependent
	my %arch_packages = map { $_ => 1 } getpackages("arch");
	@packages = grep { $arch_packages{$_} } @packages;
}
elsif ($sequence eq 'binary-indep') {
	push @options, "-i";
	# ditto optimisation for arch indep
	my %indep_packages = map { $_ => 1 } getpackages("indep");
	@packages = grep { $indep_packages{$_} } @packages;
}
while (@ARGV_orig) {
	my $opt=shift @ARGV_orig;
	next if $opt eq $sequence;
	if ($opt =~ /^--?(after|until|before|with|without)$/) {
		shift @ARGV_orig;
		next;
	}
	elsif ($opt =~ /^--?(no-act|remaining|(after|until|before|with|without)=)/) {
		next;
	}
	push @options, $opt;
}

# Figure out at what point in the sequence to start for each package.
my %logged;
my %startpoint;
foreach my $package (@packages) {
	my @log=load_log($package, \%logged);
	if ($dh{AFTER}) {
		# Run commands in the sequence that come after the
		# specified command.
		$startpoint{$package}=command_pos($dh{AFTER}, @sequence) + 1;
		# Write a dummy log entry indicating that the specified
		# command was, in fact, run. This handles the case where
		# no commands remain to run after it, communicating to
		# future dh instances that the specified command should not
		# be run again.
		write_log($sequence[$startpoint{$package}-1], $package);
	}
	elsif ($dh{REMAINING}) {
		# Start at the beginning so all remaining commands will get
		# run.
		$startpoint{$package}=0;
	}
	else {
		# Find the last logged command that is in the sequence, and
		# continue with the next command after it. If no logged
		# command is in the sequence, we're starting at the beginning.. 			
		$startpoint{$package}=0;
COMMAND:	foreach my $command (reverse @log) {
			foreach my $i (0..$#sequence) {
				if ($command eq $sequence[$i]) {
					$startpoint{$package}=$i+1;
					last COMMAND;
				}
			}
		}
	}
}

# Figure out what point in the sequence to go to.
my $stoppoint=$#sequence;
if ($dh{UNTIL}) {
	$stoppoint=command_pos($dh{UNTIL}, @sequence);
}
elsif ($dh{BEFORE}) {
	$stoppoint=command_pos($dh{BEFORE}, @sequence) - 1;
}

# Now run the commands in the sequence.
foreach my $i (0..$stoppoint) {
	# Figure out which packages need to run this command.
	my @exclude;
	foreach my $package (@packages) {
		if ($startpoint{$package} > $i ||
		    $logged{$package}{$sequence[$i]}) {
			push @exclude, $package;
		}
	}
	
	if (@exclude eq @packages) {
		# Command already done for all packages.
		next;
	}

	run($sequence[$i], \@packages, \@exclude, @options);
}

sub run {
	my $command=shift;
	my @packages=@{shift()};
	my @exclude=@{shift()};
	my @options=@_;
	
	# If some packages are excluded, add flags
	# to prevent them from being acted on.
	push @options, map { "-N$_" } @exclude;

	# Check for override targets in debian/rules and
	# run them instead of running the command directly.
	my $override_command;
	if (rules_explicit_target("override_".$command)) {
		$override_command=$command;
		# This passes the options through to commands called
		# inside the target.
		$ENV{DH_INTERNAL_OPTIONS}=join("\x1e", @options);
		$command="debian/rules";
		@options="override_".$override_command;
	}
	else {
		# Pass additional command options if any
		unshift @options, @{$command_opts{$command}} if exists $command_opts{$command};
	}

	# 3 space indent lines the command being run up under the 
	# sequence name after "dh ".
	print "   ".escape_shell($command, @options)."\n";

	if (! $dh{NO_ACT}) {
		my $ret=system($command, @options);
		if ($ret >> 8 != 0) {
			exit $ret >> 8;
		}
		elsif ($ret) {
			exit 1;
		}

		if (defined $override_command) {
			delete $ENV{DH_INTERNAL_OPTIONS};
			# Need to handle logging for overriden commands here,
			# because the actual debhelper command may not have
			# been run by the rules file target.
			# (But avoid logging for dh_clean since it removes
			# the log earlier.)
			if ($override_command ne 'dh_clean') {
				my %packages=map { $_ => 1 } @packages;
				map { delete $packages{$_} } @exclude;
				write_log($override_command, keys %packages);
			}
		}
	}
}

{
my %targets;
my $rules_parsed;

sub rules_explicit_target {
	# Checks if a specified target exists as an explicit target
	# in debian/rules. 
	my $target=shift;
	
	if (! $rules_parsed) {	
		my $processing_targets = 0;
		my $not_a_target = 0;
		open(MAKE, "LC_ALL=C make -Rrnpsf debian/rules debhelper-fail-me 2>/dev/null |");
		while (<MAKE>) {
			if ($processing_targets) {
				if (/^# Not a target:/) {
					$not_a_target = 1;
				}
				else {
					if (!$not_a_target && /^([^#:]+)::?/) {
						# Target is defined.
						# NOTE: if it is a depenency
						# of .PHONY it will be
						# defined too but that's ok.
						$targets{$1} = 1;
					}
					# "Not a target:" is always followed by
					# a target name, so resetting this one
					# here is safe.
					$not_a_target = 0;
				}
			} elsif (/^# Files$/) {
				$processing_targets = 1;
			}
		}
		close MAKE;
		$rules_parsed = 1;
	}

	return exists $targets{$target};
}

}

=head1 SEE ALSO

L<debhelper(7)>

This program is a part of debhelper.

=head1 AUTHOR

Joey Hess <joeyh@debian.org>

=cut