# Simplified Chinese translation to dpkg.
# This file is distributed under the same license as the dpkg package.
#
# Copyrights:
# Hiweed Leng <hiweed@163.com>, 2004.
# Kov Chai <tchaikov@gmail.com>, 2005,2006,2007
# Ming Hua <minghua@rice.edu>, 2006.
# Carlos Z.F. Liu <carlosliu@users.sourceforge.net>, 2004,2006.
# Anthony Wong <ypwong@debian.org.hk>, 2007.
# Deng Xiyue <manphiz-guest@users.alioth.debian.org>, 2007, 2008, 2009.
# Aron Xu <happyaron.xu@gmail.com>, 2009.
#
msgid ""
msgstr ""
"Project-Id-Version: dpkg\n"
"Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org\n"
"POT-Creation-Date: 2010-03-24 13:59+0100\n"
"PO-Revision-Date: 2009-12-15 15:21+0800\n"
"Last-Translator: Aron Xu <happyaron.xu@gmail.com>\n"
"Language-Team: Simplified Chinese <debian-chinese-gb@lists.debian.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: lib/dpkg/buffer.c:254
#, fuzzy, c-format
msgid "failed to read on buffer copy for %s"
msgstr "无法 buffer_copy (%s)"

#: lib/dpkg/buffer.c:256
#, fuzzy, c-format
msgid "failed in write on buffer copy for %s"
msgstr "无法 buffer_copy (%s)"

#: lib/dpkg/buffer.c:258
#, fuzzy, c-format
msgid "short read on buffer copy for %s"
msgstr "buffer_copy (%s) 未读完所有数据"

#: lib/dpkg/command.c:182
#, fuzzy, c-format
msgid "unable to execute %s (%s)"
msgstr "无法运行 %s"

#: lib/dpkg/compress.c:76
#, c-format
msgid "%s: decompression"
msgstr "%s：解压缩"

#: lib/dpkg/compress.c:83
#, c-format
msgid "%s: compression"
msgstr "%s：压缩"

#: lib/dpkg/compress.c:107
#, c-format
msgid "%s: error binding input to gzip stream"
msgstr ""

#: lib/dpkg/compress.c:119
#, fuzzy, c-format
msgid "%s: internal gzip read error: '%s'"
msgstr "%s：内部 gzip 错误：“%s”"

#: lib/dpkg/compress.c:127 lib/dpkg/compress.c:131
#, fuzzy, c-format
msgid "%s: internal gzip write error"
msgstr "%s：内部 gzip 错误：“%s”"

#: lib/dpkg/compress.c:147
#, c-format
msgid "%s: error binding output to gzip stream"
msgstr ""

#: lib/dpkg/compress.c:154
#, fuzzy, c-format
msgid "%s: internal gzip read error"
msgstr "%s：内部 gzip 错误：“%s”"

#: lib/dpkg/compress.c:164
#, fuzzy, c-format
msgid "%s: internal gzip write error: '%s'"
msgstr "%s：内部 gzip 错误：“%s”"

#: lib/dpkg/compress.c:177
#, fuzzy, c-format
msgid "%s: internal gzip write error: %s"
msgstr "%s：内部 gzip 错误：“%s”"

#: lib/dpkg/compress.c:219
#, c-format
msgid "%s: error binding input to bzip2 stream"
msgstr ""

#: lib/dpkg/compress.c:231
#, fuzzy, c-format
msgid "%s: internal bzip2 read error: '%s'"
msgstr "%s：内部 bzip2 错误：“%s”"

#: lib/dpkg/compress.c:239 lib/dpkg/compress.c:243 lib/dpkg/compress.c:295
#, fuzzy, c-format
msgid "%s: internal bzip2 write error"
msgstr "%s：内部 bzip2 错误：“%s”"

#: lib/dpkg/compress.c:259
#, c-format
msgid "%s: error binding output to bzip2 stream"
msgstr ""

#: lib/dpkg/compress.c:266
#, fuzzy, c-format
msgid "%s: internal bzip2 read error"
msgstr "%s：内部 bzip2 错误：“%s”"

#: lib/dpkg/compress.c:276 lib/dpkg/compress.c:287
#, fuzzy, c-format
msgid "%s: internal bzip2 write error: '%s'"
msgstr "%s：内部 bzip2 错误：“%s”"

#: lib/dpkg/compress.c:283
msgid "unexpected bzip2 error"
msgstr ""

#: lib/dpkg/database.c:201
#, c-format
msgid "size %7d occurs %5d times\n"
msgstr "大小为 %7d 的出现了 %5d 次\n"

#: lib/dpkg/dbmodify.c:65
#, c-format
msgid ""
"updates directory contains file `%.250s' whose name is too long (length=%d, "
"max=%d)"
msgstr "更新目录中包含文件“%.250s”，其文件名太长(长度为 %d，但最大不能超过 %d)"

#: lib/dpkg/dbmodify.c:69
#, c-format
msgid ""
"updates directory contains files with different length names (both %d and %d)"
msgstr "更新目录中含有不同长度名称的文件(分别为 %d 和 %d)"

#: lib/dpkg/dbmodify.c:83
#, c-format
msgid "cannot scan updates directory `%.255s'"
msgstr "无法扫描更新目录“%.255s”"

#: lib/dpkg/dbmodify.c:99
#, c-format
msgid "failed to remove incorporated update file %.255s"
msgstr "删除合并的更新文件“%.255s”失败"

#: lib/dpkg/dbmodify.c:119 dpkg-deb/build.c:399
#, c-format
msgid "unable to create `%.255s'"
msgstr "无法创建“%.255s”"

#: lib/dpkg/dbmodify.c:123
#, c-format
msgid "unable to fill %.250s with padding"
msgstr "无法填充 %.250s"

#: lib/dpkg/dbmodify.c:125
#, c-format
msgid "unable to flush %.250s after padding"
msgstr "无法在填充后刷新 %.250s"

#: lib/dpkg/dbmodify.c:127
#, c-format
msgid "unable to seek to start of %.250s after padding"
msgstr "无法在填充 %.250s 后找到起始位置"

#: lib/dpkg/dbmodify.c:161
msgid "you do not have permission to lock the dpkg status database"
msgstr "您没有为 dpkg 的状态数据库加锁的权限"

#: lib/dpkg/dbmodify.c:162
msgid "unable to open/create status database lockfile"
msgstr "无法打开或建立状态数据库的锁文件"

#: lib/dpkg/dbmodify.c:167
msgid "unable to lock dpkg status database"
msgstr "无法为 dpkg 的状态数据库加锁"

#: lib/dpkg/dbmodify.c:168
msgid "status database area is locked by another process"
msgstr "另外一个进程已经为状态数据库加了锁"

#: lib/dpkg/dbmodify.c:197
msgid "requested operation requires superuser privilege"
msgstr "该操作需要超级用户权限"

#: lib/dpkg/dbmodify.c:202
msgid "unable to access dpkg status area"
msgstr "无法访问 dpkg 状态区域"

#: lib/dpkg/dbmodify.c:204
msgid "operation requires read/write access to dpkg status area"
msgstr "该操作需要用户对 dpkg 状态目录有读写权限"

#: lib/dpkg/dbmodify.c:252
#, c-format
msgid "failed to remove my own update file %.255s"
msgstr "删除我自己的更新文件 %.255s 失败"

#: lib/dpkg/dbmodify.c:293
#, c-format
msgid "unable to write updated status of `%.250s'"
msgstr "无法写入“%.250s”的更新状态"

#: lib/dpkg/dbmodify.c:295
#, c-format
msgid "unable to flush updated status of `%.250s'"
msgstr "无法刷新“%.250s”的更新状态"

#: lib/dpkg/dbmodify.c:297
#, c-format
msgid "unable to truncate for updated status of `%.250s'"
msgstr "无法截断“%.250s”的更新状态"

#: lib/dpkg/dbmodify.c:299
#, c-format
msgid "unable to fsync updated status of `%.250s'"
msgstr "无法同步“%.250s”的更新状态"

#: lib/dpkg/dbmodify.c:301
#, c-format
msgid "unable to close updated status of `%.250s'"
msgstr "无法关闭“%.250s”的更新状态文件"

#: lib/dpkg/dbmodify.c:304
#, c-format
msgid "unable to install updated status of `%.250s'"
msgstr "无法安装“%.250s”的更新状态"

#: lib/dpkg/dump.c:350
#, c-format
msgid "failed to write details of `%.50s' to `%.250s'"
msgstr "将“%.50s”详情写入至“%.250s”失败"

#: lib/dpkg/dump.c:377
#, fuzzy, c-format
msgid "failed to open '%s' for writing %s database"
msgstr "无法打开“%s”以写入“%s”信息"

#: lib/dpkg/dump.c:380
#, fuzzy, c-format
msgid "unable to set buffering on %s database file"
msgstr "无法为状态文件设置缓冲区"

#: lib/dpkg/dump.c:391
#, fuzzy, c-format
msgid "failed to write %s database record about '%.50s' to '%.250s'"
msgstr "写入 %s 记录失败(“%.50s”到“%.250s”)"

#: lib/dpkg/dump.c:399
#, fuzzy, c-format
msgid "failed to flush %s database to '%.250s'"
msgstr "刷新 %s 信息到“%.250s”失败"

#: lib/dpkg/dump.c:401
#, fuzzy, c-format
msgid "failed to fsync %s database to '%.250s'"
msgstr "同步 %s 信息到“%.250s”失败"

#: lib/dpkg/dump.c:404
#, fuzzy, c-format
msgid "failed to close '%.250s' after writing %s database"
msgstr "写入 %s 信息后，关闭“%.250s”失败"

#: lib/dpkg/dump.c:408
#, fuzzy, c-format
msgid "failed to link '%.250s' to '%.250s' for backup of %s database"
msgstr "建立“%.250s”到“%.250s”的链接时失败(该链接用于备份 %s 信息)"

#: lib/dpkg/dump.c:411
#, fuzzy, c-format
msgid "failed to install '%.250s' as '%.250s' containing %s database"
msgstr "将包含 %s 信息的“%.250s”安装为“%.250s”时失败"

#: lib/dpkg/ehandle.c:91
#, c-format
msgid ""
"%s: unrecoverable fatal error, aborting:\n"
" %s\n"
msgstr ""
"%s: 无法恢复的致命错误，中止：\n"
" %s\n"

#: lib/dpkg/ehandle.c:107
msgid "out of memory pushing error handler: "
msgstr "向错误处理函数压栈时内存不足: "

#: lib/dpkg/ehandle.c:123
#, c-format
msgid ""
"%s: error while cleaning up:\n"
" %s\n"
msgstr ""
"%s：清理时出错:\n"
" %s\n"

#: lib/dpkg/ehandle.c:138
#, c-format
msgid "dpkg: too many nested errors during error recovery !!\n"
msgstr "dpkg：在错误恢复过程中发生了太多的嵌套错误！！\n"

#: lib/dpkg/ehandle.c:211
msgid "out of memory for new cleanup entry with many arguments"
msgstr "新建清理条目参数太多，内存不足"

#: lib/dpkg/ehandle.c:223
msgid "out of memory for new cleanup entry"
msgstr "新建清理条目时内存不足"

#: lib/dpkg/ehandle.c:288
#, c-format
msgid "%s: warning: %s\n"
msgstr "%s：警告：%s\n"

#: lib/dpkg/ehandle.c:292
#, c-format
msgid "error writing `%s'"
msgstr "“%s”写入错误"

#: lib/dpkg/ehandle.c:305
#, c-format
msgid "%s:%s:%d: internal error: %s\n"
msgstr "%s:%s:%d：内部错误：%s\n"

#: lib/dpkg/fields.c:46
#, c-format
msgid "%s is missing"
msgstr "%s 缺失"

#: lib/dpkg/fields.c:55
#, c-format
msgid "`%.*s' is not allowed for %s"
msgstr "“%.*s”不被 %s 所允许"

#: lib/dpkg/fields.c:63
#, c-format
msgid "junk after %s"
msgstr "忽略 %s 后的数据"

#: lib/dpkg/fields.c:75
#, c-format
msgid "invalid package name (%.250s)"
msgstr "软件包名称无效(%.250s)"

#: lib/dpkg/fields.c:90
#, c-format
msgid "empty file details field `%s'"
msgstr "文件描述字段“%s”为空"

#: lib/dpkg/fields.c:93
#, c-format
msgid "file details field `%s' not allowed in status file"
msgstr "状态文件不允许文件描述字段“%s”"

#: lib/dpkg/fields.c:106
#, c-format
msgid "too many values in file details field `%s' (compared to others)"
msgstr "文件描述字段“%s”中的值太多(和其他的相比)"

#: lib/dpkg/fields.c:120
#, c-format
msgid "too few values in file details field `%s' (compared to others)"
msgstr "文件描述字段“%s”中的值太少(和其他的相比)"

#: lib/dpkg/fields.c:138
msgid "yes/no in boolean field"
msgstr "布尔型字段的“yes/no”"

#: lib/dpkg/fields.c:154
msgid "word in `priority' field"
msgstr "“priority”字段中的文字"

#: lib/dpkg/fields.c:166
msgid "value for `status' field not allowed in this context"
msgstr "该环境中不允许“status”字段的值"

#: lib/dpkg/fields.c:170
msgid "first (want) word in `status' field"
msgstr "“status”字段的第一个词(want)"

#: lib/dpkg/fields.c:172
msgid "second (error) word in `status' field"
msgstr "“status”字段的第二个词(error)"

#: lib/dpkg/fields.c:174
msgid "third (status) word in `status' field"
msgstr "“status”字段的第三个词(status)"

#: lib/dpkg/fields.c:186
#, c-format
msgid "error in Version string `%.250s': %.250s"
msgstr "版本字符串“%.250s”中有错误: %.250s"

#: lib/dpkg/fields.c:195
msgid "obsolete `Revision' or `Package-Revision' field used"
msgstr "您使用了已经废弃不用的字段“Revision”或者“Package-Revision”"

#: lib/dpkg/fields.c:212
msgid "value for `config-version' field not allowed in this context"
msgstr "“config-version”字段的值在该环境中不被允许"

#: lib/dpkg/fields.c:219
#, c-format
msgid "error in Config-Version string `%.250s': %.250s"
msgstr "Config-Version 字符串“%.250s”中有错误: %.250s"

#: lib/dpkg/fields.c:244
#, c-format
msgid "value for `conffiles' has malformatted line `%.*s'"
msgstr "“conffiles” 的值包含了有格式错误的行：“%.*s”"

#: lib/dpkg/fields.c:263
#, c-format
msgid "value for `conffiles' has line starting with non-space `%c'"
msgstr "“conffiles”的值中，有的行是以“%c”开头的，而它不是空格"

#: lib/dpkg/fields.c:280
msgid "root or null directory is listed as a conffile"
msgstr "根目录或是空目录也被列为了 conffile"

#: lib/dpkg/fields.c:333
#, c-format
msgid ""
"`%s' field, missing package name, or garbage where package name expected"
msgstr ""
"“%s\" 字段缺少软件包名，也可能是在本该填写软件包名的地方发现了无意义的数据"

#: lib/dpkg/fields.c:338
#, c-format
msgid "`%s' field, invalid package name `%.255s': %s"
msgstr "“%s”字段，无效的软件包名“%.255s”:%s"

#: lib/dpkg/fields.c:368
#, c-format
msgid ""
"`%s' field, reference to `%.255s':\n"
" bad version relationship %c%c"
msgstr ""
"“%s”字段，于 “%.255s”:\n"
" 错误的版本依赖关系 %c%c"

#: lib/dpkg/fields.c:374
#, c-format
msgid ""
"`%s' field, reference to `%.255s':\n"
" `%c' is obsolete, use `%c=' or `%c%c' instead"
msgstr ""
"“%s”字段，于“%.255s”:\n"
" “%c” 已被废弃不用，请使用“%c=”或者“%c%c”"

#: lib/dpkg/fields.c:384
#, c-format
msgid ""
"`%s' field, reference to `%.255s':\n"
" implicit exact match on version number, suggest using `=' instead"
msgstr ""
"“%s”字段，于“%.255s”:\n"
" 未明确要求版本号完全一致，建议使用“=”"

#: lib/dpkg/fields.c:392
msgid "Only exact versions may be used for Provides"
msgstr "Provides 中只能指明具体的版本"

#: lib/dpkg/fields.c:396
#, c-format
msgid ""
"`%s' field, reference to `%.255s':\n"
" version value starts with non-alphanumeric, suggest adding a space"
msgstr ""
"“%s”字段，于“%.255s”:\n"
" 版本号以一个不是字母的字符开头，建议加一个空格"

#: lib/dpkg/fields.c:413 lib/dpkg/fields.c:417
#, c-format
msgid "`%s' field, reference to `%.255s': version contains `%c'"
msgstr "“%s”字段，于“%.255s”：版本号含有“%c”"

#: lib/dpkg/fields.c:421
#, c-format
msgid "`%s' field, reference to `%.255s': version unterminated"
msgstr "“%s”字段，于“%.255s”：版本号不应就此终止"

#: lib/dpkg/fields.c:429
#, c-format
msgid "`%s' field, reference to `%.255s': error in version: %.255s"
msgstr "“%s”字段，于“%.255s”：解析版本号时出错：%.255s"

#: lib/dpkg/fields.c:440
#, c-format
msgid "`%s' field, syntax error after reference to package `%.255s'"
msgstr "“%s”字段，在引用软件包“%.255s”后发现语法错误"

#: lib/dpkg/fields.c:447
#, c-format
msgid "alternatives (`|') not allowed in %s field"
msgstr "在 %s 字段中不能含有替换项(“|”)"

#: lib/dpkg/fields.c:501
msgid "value for `triggers-pending' field not allowed in this context"
msgstr "“triggers-pending”字段的值在该环境中不被允许"

#: lib/dpkg/fields.c:508
#, c-format
msgid "illegal pending trigger name `%.255s': %s"
msgstr "非法的未决触发器名“%.255s”：%s"

#: lib/dpkg/fields.c:512
#, c-format
msgid "duplicate pending trigger `%.255s'"
msgstr "重复的未决触发器“%.255s”"

#: lib/dpkg/fields.c:526
msgid "value for `triggers-awaited' field not allowed in this context"
msgstr "“triggers-awaited”字段的值在该环境中不被允许"

#: lib/dpkg/fields.c:533
#, c-format
msgid "illegal package name in awaited trigger `%.255s': %s"
msgstr "在等待触发器“%.255s”中包含非法的软件包名：%s"

#: lib/dpkg/fields.c:539
#, c-format
msgid "duplicate awaited trigger package `%.255s'"
msgstr "重复的等待触发包“%.255s”"

#: lib/dpkg/file.c:45
#, fuzzy, c-format
msgid "unable to stat source file '%.250s'"
msgstr "无法打开原始文件“%.250s”"

#: lib/dpkg/file.c:49
#, fuzzy, c-format
msgid "unable to change ownership of target file '%.250s'"
msgstr "无法改变新发布版的 conffile “%.250s”的属主"

#: lib/dpkg/file.c:53
#, fuzzy, c-format
msgid "unable to set mode of target file '%.250s'"
msgstr "无法设置新发布版的 conffile “%.250s”的权限位"

#: lib/dpkg/file.c:68
msgid "unable to unlock dpkg status database"
msgstr "无法为 dpkg 的状态数据库解锁"

#: lib/dpkg/log.c:52
#, c-format
msgid "couldn't open log `%s': %s\n"
msgstr "无法打开日志文件“%s”：%s\n"

#: lib/dpkg/log.c:100
#, c-format
msgid "unable to write to status fd %d"
msgstr "无法写入状态 fd %d"

#: lib/dpkg/mlib.c:44
#, c-format
msgid "malloc failed (%ld bytes)"
msgstr "malloc 失败 (%ld 字节)"

#: lib/dpkg/mlib.c:57
#, c-format
msgid "realloc failed (%ld bytes)"
msgstr "realloc 失败(%ld 字节)"

#: lib/dpkg/mlib.c:71
msgid "failed to allocate memory"
msgstr "分配内存失败"

#: lib/dpkg/mlib.c:83
#, c-format
msgid "failed to dup for std%s"
msgstr "无法 dup 到 std%s"

#: lib/dpkg/mlib.c:84
#, c-format
msgid "failed to dup for fd %d"
msgstr "无法 dup 到 fd %d"

#: lib/dpkg/mlib.c:90
msgid "failed to create pipe"
msgstr "无法新建管道"

#: lib/dpkg/mlib.c:98
#, c-format
msgid "error writing to '%s'"
msgstr "写入到“%s”出错"

#: lib/dpkg/mlib.c:105
#, c-format
msgid "unable to read filedescriptor flags for %.250s"
msgstr "在 %.250s 时，无法读取 filedescriptor 标志位"

#: lib/dpkg/mlib.c:107
#, c-format
msgid "unable to set close-on-exec flag for %.250s"
msgstr "在 %.250s 时，无法设置 close-on-exec 标志位"

#: lib/dpkg/myopt.c:61
#, c-format
msgid "configuration error: %s:%d: %s"
msgstr "配置错误：%s:%d：%s"

#: lib/dpkg/myopt.c:73
#, c-format
msgid "failed to open configuration file '%.255s' for reading: %s"
msgstr "无法打开配置文件 “%.255s”以备读取：%s"

#: lib/dpkg/myopt.c:100
#, c-format
msgid "unbalanced quotes in '%s'"
msgstr "“%s”中有不平衡引用"

#: lib/dpkg/myopt.c:115
#, c-format
msgid "unknown option '%s'"
msgstr "未知选项“%s”"

#: lib/dpkg/myopt.c:119
#, c-format
msgid "'%s' needs a value"
msgstr "'%s' 选项需要一个值"

#: lib/dpkg/myopt.c:125
#, c-format
msgid "'%s' does not take a value"
msgstr "'%s' 选项不需要值"

#: lib/dpkg/myopt.c:130
#, c-format
msgid "read error in configuration file `%.255s'"
msgstr "读取配置文件“%.255s”时出错"

#: lib/dpkg/myopt.c:131
#, c-format
msgid "error closing configuration file `%.255s'"
msgstr "关闭配置文件“%.255s”时出错"

#: lib/dpkg/myopt.c:168
#, c-format
msgid "error opening configuration directory '%s'"
msgstr "打开配置目录“%s”时出错"

#: lib/dpkg/myopt.c:229
#, c-format
msgid "unknown option --%s"
msgstr "未知选项 -- %s"

#: lib/dpkg/myopt.c:233
#, c-format
msgid "--%s option takes a value"
msgstr "--%s 选项需要一个参数"

#: lib/dpkg/myopt.c:238
#, c-format
msgid "--%s option does not take a value"
msgstr "--%s 选项不需要参数"

#: lib/dpkg/myopt.c:245
#, c-format
msgid "unknown option -%c"
msgstr "未知选项 -%c"

#: lib/dpkg/myopt.c:250
#, c-format
msgid "-%c option takes a value"
msgstr "-%c 选项需要一个参数"

#: lib/dpkg/myopt.c:258
#, c-format
msgid "-%c option does not take a value"
msgstr "-%c 选项不需要参数"

#: lib/dpkg/parse.c:116
#, c-format
msgid "failed to open package info file `%.255s' for reading"
msgstr "无法打开软件包的 info 文件“%.255s”进行读取"

#: lib/dpkg/parse.c:121
#, c-format
msgid "can't stat package info file `%.255s'"
msgstr "无法获得软件包 info 文件“%.255s”的状态"

#: lib/dpkg/parse.c:127
#, c-format
msgid "can't mmap package info file `%.255s'"
msgstr "无法 mmap 软件包的 info 文件“%.255s”"

#: lib/dpkg/parse.c:131
#, c-format
msgid "copy info file `%.255s'"
msgstr "复制 info 文件 “%.255s”"

#: lib/dpkg/parse.c:162
#, c-format
msgid "EOF after field name `%.*s'"
msgstr "在字段名“%.*s”后发现 EOF"

#: lib/dpkg/parse.c:165
#, c-format
msgid "newline in field name `%.*s'"
msgstr "在字段名“%.*s”中发现换行符"

#: lib/dpkg/parse.c:168
#, c-format
msgid "MSDOS EOF (^Z) in field name `%.*s'"
msgstr "在字段名“%.*s”中发现 MSDOS EOF (^Z)"

#: lib/dpkg/parse.c:172
#, c-format
msgid "field name `%.*s' must be followed by colon"
msgstr "字段名“%.*s”后必须紧跟冒号"

#: lib/dpkg/parse.c:181
#, c-format
msgid "EOF before value of field `%.*s' (missing final newline)"
msgstr "在字段“%.*s”的值的前面发现了 EOF(缺少最后结尾的换行符)"

#: lib/dpkg/parse.c:185
#, c-format
msgid "MSDOS EOF char in value of field `%.*s' (missing newline?)"
msgstr "在字段“%.*s”的值中间发现了 MSDOS EOF 字符(缺少最后结尾的换行符？)"

#: lib/dpkg/parse.c:199
#, c-format
msgid "EOF during value of field `%.*s' (missing final newline)"
msgstr "在字段“%.*s”的值中间发现了 EOF 字符(缺少最后结尾的换行符)"

#: lib/dpkg/parse.c:224
#, c-format
msgid "duplicate value for `%s' field"
msgstr "有多个值对应于字段“%s”"

#: lib/dpkg/parse.c:229
#, c-format
msgid "user-defined field name `%.*s' too short"
msgstr "用户自定义的字段名“%.*s”太短"

#: lib/dpkg/parse.c:235
#, c-format
msgid "duplicate value for user-defined field `%.*s'"
msgstr "有多个值对应于用户自定义的字段“%.*s”"

#: lib/dpkg/parse.c:249
msgid "several package info entries found, only one allowed"
msgstr "发现了多个软件包的 info 条目，但只允许一个"

#: lib/dpkg/parse.c:274
msgid "Configured-Version for package with inappropriate Status"
msgstr "软件包有 Configured-Version 的标志，但是它安装状态却与之不符"

#: lib/dpkg/parse.c:284
#, c-format
msgid "package has status %s but triggers are awaited"
msgstr "软件包有 %s 状态但触发器在等待"

#: lib/dpkg/parse.c:288
msgid "package has status triggers-awaited but no triggers awaited"
msgstr "软件包有触发器等待状态但没有触发器在等待"

#: lib/dpkg/parse.c:295
#, c-format
msgid "package has status %s but triggers are pending"
msgstr "软件包有 %s 状态但是触发器处于未决状态"

#: lib/dpkg/parse.c:299
msgid "package has status triggers-pending but no triggers pending"
msgstr "软件包有触发器未决状态但没有触发器处于未决状态"

#: lib/dpkg/parse.c:310
msgid "Package which in state not-installed has conffiles, forgetting them"
msgstr "该软件包的状态是尚未安装，但是它却有 conffiles，忽略这些 conffile"

#: lib/dpkg/parse.c:397
#, c-format
msgid "failed to close after read: `%.255s'"
msgstr "读取完毕“%.255s”后，无法关闭该文件"

#: lib/dpkg/parse.c:398
#, c-format
msgid "no package information in `%.255s'"
msgstr "在”%.255s“中没有软件包的相关信息"

#: lib/dpkg/parsehelp.c:40
#, c-format
msgid ""
"%s, in file '%.255s' near line %d package '%.255s':\n"
" "
msgstr ""
"%s，在文件“%.255s”第“%d”行附近，软件包“%.255s”:\n"
" "

#: lib/dpkg/parsehelp.c:43
#, c-format
msgid ""
"%s, in file '%.255s' near line %d:\n"
" "
msgstr ""
"%s，在文件“%.255s”第“%d”行附近:\n"
" "

#: lib/dpkg/parsehelp.c:54
msgid "parse error"
msgstr "解析错误"

#: lib/dpkg/parsehelp.c:69
msgid "warning"
msgstr "警告"

#: lib/dpkg/parsehelp.c:78
msgid "failed to write parsing warning"
msgstr "无法写解析警告"

#: lib/dpkg/parsehelp.c:140
msgid "may not be empty string"
msgstr "不应当为空字符串"

#: lib/dpkg/parsehelp.c:141
msgid "must start with an alphanumeric"
msgstr "必须以字母开头"

#: lib/dpkg/parsehelp.c:150
#, c-format
msgid "character `%c' not allowed (only letters, digits and characters `%s')"
msgstr "不允许出现字符“%c” (只能使用字符、数字和 %s)"

#: lib/dpkg/parsehelp.c:205
msgid "<none>"
msgstr "<无>"

#: lib/dpkg/parsehelp.c:220
msgid "version string is empty"
msgstr "版本号为空"

#: lib/dpkg/parsehelp.c:234
msgid "version string has embedded spaces"
msgstr "版本号里嵌有空格字符"

#: lib/dpkg/parsehelp.c:239
msgid "epoch in version is not number"
msgstr "版本中的版次不是数字"

#: lib/dpkg/parsehelp.c:240
msgid "nothing after colon in version number"
msgstr "版本号的冒号后面没有任何东西"

#: lib/dpkg/parsehelp.c:261 lib/dpkg/parsehelp.c:274
#, c-format
msgid "missing %s"
msgstr "找不到 %s"

#: lib/dpkg/parsehelp.c:263 lib/dpkg/parsehelp.c:277
#, c-format
msgid "empty value for %s"
msgstr "%s 的值为空"

#: lib/dpkg/pkg-format.c:80
#, c-format
msgid "invalid character `%c' in field width\n"
msgstr "字段宽度中有无效的字符“%c”\n"

#: lib/dpkg/pkg-format.c:172
#, c-format
msgid "Closing brace missing in format\n"
msgstr "没有发现格式字串中配对的右括号\n"

#: lib/dpkg/subproc.c:54
#, c-format
msgid "unable to ignore signal %s before running %.250s"
msgstr "无法在运行 %2$.250s 之前忽略信号 %1$s"

#: lib/dpkg/subproc.c:67
#, c-format
msgid "error un-catching signal %s: %s\n"
msgstr "当恢复处理信号 %s 时出错：%s\n"

#: lib/dpkg/subproc.c:77
#, c-format
msgid "%s (subprocess): %s\n"
msgstr "%s (子进程)：%s\n"

#: lib/dpkg/subproc.c:96
msgid "fork failed"
msgstr "fork 失败"

#: lib/dpkg/subproc.c:119 lib/dpkg/subproc.c:122
#, c-format
msgid "subprocess %s returned error exit status %d"
msgstr "子进程 %s 返回了错误号 %d"

#: lib/dpkg/subproc.c:131 lib/dpkg/subproc.c:135
#, c-format
msgid "subprocess %s killed by signal (%s)%s"
msgstr "子进程 %s 被信号(%s)%s 终止了"

#: lib/dpkg/subproc.c:133 lib/dpkg/subproc.c:137
msgid ", core dumped"
msgstr "，核心已转储"

#: lib/dpkg/subproc.c:139
#, c-format
msgid "subprocess %s failed with wait status code %d"
msgstr "子进程 %s 出错，所获得的等待状态数为 %d"

#: lib/dpkg/subproc.c:156
#, fuzzy, c-format
msgid "wait for subprocess %s failed"
msgstr "等待子进程 %s 退出时出错"

#: lib/dpkg/trigdeferred.l:71
#, c-format
msgid "invalid package name `%.250s' in triggers deferred file `%.250s'"
msgstr "无效的软件包名“%.250s”出现在触发推迟文件“%.250s”"

#: lib/dpkg/trigdeferred.l:80
#, c-format
msgid "truncated triggers deferred file `%.250s'"
msgstr "已截断触发推迟文件“%.250s”"

#: lib/dpkg/trigdeferred.l:84
#, c-format
msgid "syntax error in triggers deferred file `%.250s' at character `%s'%s"
msgstr "触发推迟文件“%.250s”中有语法错误，在字符“%s”%s"

#: lib/dpkg/trigdeferred.l:121
#, c-format
msgid "unable to open/create triggers lockfile `%.250s'"
msgstr "无法打开/创建触发器锁文件“%.250s”"

#: lib/dpkg/trigdeferred.l:128
msgid "unable to lock triggers area"
msgstr "无法锁定触发器区域"

#: lib/dpkg/trigdeferred.l:139
#, c-format
msgid "unable to stat triggers deferred file `%.250s'"
msgstr "无法获取触发推迟文件“%.250s”的信息"

#: lib/dpkg/trigdeferred.l:153
#, c-format
msgid "unable to open triggers deferred file `%.250s'"
msgstr "无法打开触发推迟文件“%.250s”"

#: lib/dpkg/trigdeferred.l:167
#, c-format
msgid "unable to open/create new triggers deferred file `%.250s'"
msgstr "无法打开/创建新的触发推迟文件“%.250s”"

#: lib/dpkg/trigdeferred.l:203
#, c-format
msgid "error reading triggers deferred file `%.250s'"
msgstr "读取触发推迟文件“%.250s”时出错"

#: lib/dpkg/trigdeferred.l:211
#, c-format
msgid "unable to write new triggers deferred file `%.250s'"
msgstr "无法写入新的触发推迟文件“%.250s”"

#: lib/dpkg/trigdeferred.l:216
#, c-format
msgid "unable to close new triggers deferred file `%.250s'"
msgstr "无法关闭新的触发推迟文件“%.250s”"

#: lib/dpkg/trigdeferred.l:220
#, c-format
msgid "unable to install new triggers deferred file `%.250s'"
msgstr "无法安装新的触发推迟文件“%.250s”"

#: lib/dpkg/triglib.c:48
msgid "empty trigger names are not permitted"
msgstr "不允许空的触发器名"

#: lib/dpkg/triglib.c:52
msgid "trigger name contains invalid character"
msgstr "触发器名包含无效字符"

#: lib/dpkg/triglib.c:316
#, c-format
msgid ""
"invalid or unknown syntax in trigger name `%.250s' (in trigger interests for "
"package `%.250s')"
msgstr ""
"触发器名“%.250s”包含无效或者未知的语法(在对软件包“%.250s”感兴趣的触发器中)"

#: lib/dpkg/triglib.c:356
#, c-format
msgid "failed to open trigger interest list file `%.250s'"
msgstr "无法打开触发关注列表文件“%.250s”"

#: lib/dpkg/triglib.c:385
#, c-format
msgid "failed to rewind trigger interest file `%.250s'"
msgstr "回到触发关注文件“%.250s”起始位置失败"

#: lib/dpkg/triglib.c:390
#, c-format
msgid ""
"trigger interest file `%.250s' syntax error; illegal package name `%.250s': "
"%.250s"
msgstr "触发关注文件“%.250s”语法错误；非法的软件包名“%.250s”：%.250s"

#: lib/dpkg/triglib.c:412
#, c-format
msgid "unable to create new trigger interest file `%.250s'"
msgstr "无法创建新的触发关注文件“%.250s”"

#: lib/dpkg/triglib.c:425
#, c-format
msgid "unable to write new trigger interest file `%.250s'"
msgstr "无法写入新的触发关注文件“%.250s”"

#: lib/dpkg/triglib.c:428
#, fuzzy, c-format
msgid "unable to flush new trigger interest file '%.250s'"
msgstr "无法创建新的触发关注文件“%.250s”"

#: lib/dpkg/triglib.c:431
#, fuzzy, c-format
msgid "unable to sync new trigger interest file '%.250s'"
msgstr "无法创建新的触发关注文件“%.250s”"

#: lib/dpkg/triglib.c:435
#, c-format
msgid "unable to close new trigger interest file `%.250s'"
msgstr "无法创建新的触发关注文件“%.250s”"

#: lib/dpkg/triglib.c:439
#, c-format
msgid "unable to install new trigger interest file `%.250s'"
msgstr "无法安装新的触发关注文件“%.250s”"

#: lib/dpkg/triglib.c:503
#, c-format
msgid ""
"duplicate file trigger interest for filename `%.250s' and package `%.250s'"
msgstr "文件“%.250s”和软件包“%.250s”有重复的文件触发关注"

#: lib/dpkg/triglib.c:526
#, c-format
msgid "unable to create new file triggers file `%.250s'"
msgstr "无法创建新的文件触发文件“%.250s”"

#: lib/dpkg/triglib.c:535
#, c-format
msgid "unable to write new file triggers file `%.250s'"
msgstr "无法写入新的文件触发文件“%.250s”"

#: lib/dpkg/triglib.c:538
#, fuzzy, c-format
msgid "unable to flush new file triggers file '%.250s'"
msgstr "无法创建新的文件触发文件“%.250s”"

#: lib/dpkg/triglib.c:541
#, fuzzy, c-format
msgid "unable to sync new file triggers file '%.250s'"
msgstr "无法创建新的文件触发文件“%.250s”"

#: lib/dpkg/triglib.c:545
#, c-format
msgid "unable to close new file triggers file `%.250s'"
msgstr "无法创建新的文件触发文件“%.250s”"

#: lib/dpkg/triglib.c:549
#, c-format
msgid "unable to install new file triggers file as `%.250s'"
msgstr "无法安装新的文件触发文件到“%.250s”"

#: lib/dpkg/triglib.c:572
#, c-format
msgid "unable to read file triggers file `%.250s'"
msgstr "无法读取文件触发文件“%.250s”"

#: lib/dpkg/triglib.c:580
#, c-format
msgid "syntax error in file triggers file `%.250s'"
msgstr "文件触发文件“%.250s”中有语法错误"

#: lib/dpkg/triglib.c:584
#, c-format
msgid ""
"file triggers record mentions illegal package name `%.250s' (for interest in "
"file `%.250s'): %.250s"
msgstr ""
"文件触发记录有提到非法的软件包名“%.250s”(用于文件“%.250s”的触发关注)：%.250s"

#: lib/dpkg/triglib.c:683
#, c-format
msgid ""
"triggers ci file `%.250s' contains illegal trigger syntax in trigger name `"
"%.250s': %.250s"
msgstr "触发器配置项文件`%.250s'在触发器名“%.250s”中包含非法触发器语法：%.250s"

#: lib/dpkg/triglib.c:703
#, c-format
msgid "unable to open triggers ci file `%.250s'"
msgstr "无法打开触发器配置项文件“%.250s”"

#: lib/dpkg/triglib.c:718
msgid "triggers ci file contains unknown directive syntax"
msgstr "触发器配置项文件包含位置指令语法"

#: lib/dpkg/triglib.c:727
#, c-format
msgid "triggers ci file contains unknown directive `%.250s'"
msgstr "触发器配置项文件包含位置指令“%.250s”"

#: lib/dpkg/triglib.c:791
#, c-format
msgid "unable to create triggers state directory `%.250s'"
msgstr "无法创建触发器状态目录“%.250s”"

#: lib/dpkg/triglib.c:794
#, c-format
msgid "unable to set ownership of triggers state directory `%.250s'"
msgstr "无法设置触发器状态目录“%.250s”的所有权"

#: lib/dpkg/utils.c:53
#, c-format
msgid "read error in `%.250s'"
msgstr "读取“%.250s”出错"

#: lib/dpkg/utils.c:58
#, c-format
msgid "fgets gave an empty string from `%.250s'"
msgstr "fgets 从“%.250s”取回了一个空的字符串"

#: lib/dpkg/utils.c:60
#, c-format
msgid "too-long line or missing newline in `%.250s'"
msgstr "文件“%.250s”中的行太长或者缺少换行符"

#: lib/dpkg/utils.c:72
#, c-format
msgid "unexpected eof reading `%.250s'"
msgstr "读取“%.250s”时发现未预期的文件结束符"

#: lib/dpkg/varbuf.c:78 lib/dpkg/varbuf.c:87
msgid "error formatting string into varbuf variable"
msgstr "将字符串格式化为 varbuf 变量时出错"

#: src/archives.c:178 src/archives.c:207 src/archives.c:651
msgid "error reading from dpkg-deb pipe"
msgstr "从 dpkg-deb 的管道读取数据时出错"

#: src/archives.c:202
#, c-format
msgid "skipped unpacking file '%.255s' (replaced or excluded?)"
msgstr "已跳过未解包文件“%.255s”(已被替换或排除？)"

#: src/archives.c:245
#, c-format
msgid "error setting timestamps of `%.255s'"
msgstr "为“%.255s”设置时间戳时出错"

#: src/archives.c:252 src/archives.c:660 src/statcmd.c:172
#, c-format
msgid "error setting ownership of `%.255s'"
msgstr "为“%.255s”设置属主时出错"

#: src/archives.c:254 src/archives.c:663 src/statcmd.c:174
#, c-format
msgid "error setting permissions of `%.255s'"
msgstr "为“%.255s”设置权限位时出错"

#: src/archives.c:357
#, c-format
msgid "failed to stat (dereference) existing symlink `%.250s'"
msgstr "获取现有的符号链接“%.250s”的状态(反引用)失败"

#: src/archives.c:379
#, c-format
msgid ""
"failed to stat (dereference) proposed new symlink target `%.250s' for "
"symlink `%.250s'"
msgstr "获取建议的新符号链接“%.250s”的状态失败，它将替代符号链接“%.250s”"

#: src/archives.c:434
#, c-format
msgid ""
"trying to overwrite `%.250s', which is the diverted version of `"
"%.250s' (package: %.100s)"
msgstr "正在尝试覆盖“%.250s”，它是“%.250s”的转移版本(软件包：%.100s)"

#: src/archives.c:440
#, c-format
msgid "trying to overwrite `%.250s', which is the diverted version of `%.250s'"
msgstr "正在尝试覆盖“%.250s”，它是“%.250s”的转移版本"

#: src/archives.c:466
#, c-format
msgid "unable to stat `%.255s' (which I was about to install)"
msgstr "无法获取“%.255s”的状态(正准备安装该文件)"

#: src/archives.c:474
#, c-format
msgid ""
"unable to clean up mess surrounding `%.255s' before installing another "
"version"
msgstr "在安装另一版本前，无法清理“%.255s”的临时文件"

#: src/archives.c:480
#, c-format
msgid "unable to stat restored `%.255s' before installing another version"
msgstr "在安装另一版本前，无法获取恢复后的“%.255s”的状态"

#: src/archives.c:515
#, c-format
msgid "archive contained object `%.255s' of unknown type 0x%x"
msgstr "包文件中含有一个对象“%.255s”，无法识别它的类型 0x%x"

#: src/archives.c:576
#, c-format
msgid "Replacing files in old package %s ...\n"
msgstr "正在替换原软件包中的文件 %s ...\n"

#: src/archives.c:579
#, c-format
msgid "Replaced by files in installed package %s ...\n"
msgstr "被已安装的软件包 %s 中的文件替换了...\n"

#: src/archives.c:586
#, c-format
msgid ""
"trying to overwrite directory '%.250s' in package %.250s %.250s with "
"nondirectory"
msgstr ""
"正试图用一个非目录的文件替换目录“%.250s”，该目录属于软件包 %.250s %.250s"

#: src/archives.c:598
#, c-format
msgid "trying to overwrite '%.250s', which is also in package %.250s %.250s"
msgstr "正试图覆盖“%.250s”，它同时被包含于软件包 %.250s %.250s"

#: src/archives.c:639
#, c-format
msgid "unable to create `%.255s' (while processing `%.255s')"
msgstr "无法创建“%.255s”(处理“%.255s”时)"

#: src/archives.c:645
#, c-format
msgid "backend dpkg-deb during `%.255s'"
msgstr "“%.255s” 时，dpkg-deb 被作为后端"

#: src/archives.c:670 src/archives.c:835
#, c-format
msgid "error closing/writing `%.255s'"
msgstr "关闭/写入“%.255s”出错"

#: src/archives.c:675
#, c-format
msgid "error creating pipe `%.255s'"
msgstr "新建管道“%.255s”时出错"

#: src/archives.c:681 src/archives.c:687
#, c-format
msgid "error creating device `%.255s'"
msgstr "新建设备文件“%.255s”时出错"

#: src/archives.c:696
#, c-format
msgid "error creating hard link `%.255s'"
msgstr "新建硬链接“%.255s”时出错"

#: src/archives.c:703
#, c-format
msgid "error creating symbolic link `%.255s'"
msgstr "新建符号链接“%.255s”时出错"

#: src/archives.c:708
#, c-format
msgid "error setting ownership of symlink `%.255s'"
msgstr "为符号链接“%.255s”设置属主时出错"

#: src/archives.c:713
#, c-format
msgid "error creating directory `%.255s'"
msgstr "新建目录“%.255s”时出错"

#: src/archives.c:753
#, c-format
msgid "unable to move aside `%.255s' to install new version"
msgstr "无法将“%.255s”改名，以安装新的版本"

#: src/archives.c:762
#, c-format
msgid "unable to read link `%.255s'"
msgstr "无法读取符号链接“%.255s”"

#: src/archives.c:766
#, c-format
msgid "unable to make backup symlink for `%.255s'"
msgstr "无法为“%.255s”做一个符号链接备份"

#: src/archives.c:768
#, c-format
msgid "unable to chown backup symlink for `%.255s'"
msgstr "无法更改“%.255s”的符号链接备份的属主"

#: src/archives.c:773
#, c-format
msgid "unable to make backup link of `%.255s' before installing new version"
msgstr "无法在安装新的版本前，为“%.255s”做一个符号链接备份"

#: src/archives.c:788 src/archives.c:841
#, c-format
msgid "unable to install new version of `%.255s'"
msgstr "无法安装“%.255s”的新版本"

#: src/archives.c:831
#, fuzzy, c-format
msgid "unable to open '%.255s'"
msgstr "无法创建“%.255s”"

#: src/archives.c:833
#, fuzzy, c-format
msgid "unable to sync file '%.255s'"
msgstr "无法关闭文件缓冲“%.255s”"

#: src/archives.c:878
#, c-format
msgid ""
"ignoring dependency problem with %s:\n"
"%s"
msgstr ""
"忽视 %s 的依赖关系问题：\n"
"%s"

#: src/archives.c:883
#, c-format
msgid ""
"considering deconfiguration of essential\n"
" package %s, to enable %s."
msgstr "正在考虑反配置基础软件包 %s，以便启用 %s。"

#: src/archives.c:886
#, c-format
msgid ""
"dpkg: no, %s is essential, will not deconfigure\n"
" it in order to enable %s.\n"
msgstr ""
"dpkg：拒绝，%s 是基础软件包，不能反配置该软件包\n"
" 启用开启 %s。\n"

#: src/archives.c:900
#, c-format
msgid ""
"dpkg: no, cannot proceed with %s (--auto-deconfigure will help):\n"
"%s"
msgstr ""
"dpkg：拒绝，不能继续进行 %s (不妨尝试 --auto-deconfigure)：\n"
"%s"

#: src/archives.c:910
#, c-format
msgid "removal of %.250s"
msgstr "卸载 %.250s"

#: src/archives.c:935
#, c-format
msgid "installation of %.250s"
msgstr "安装 %.250s"

#: src/archives.c:936
#, c-format
msgid ""
"dpkg: considering deconfiguration of %s, which would be broken by %s ...\n"
msgstr "dpkg：正在考虑反配置 %s ，否则会被 %s 破坏 ...\n"

#: src/archives.c:943
#, c-format
msgid "dpkg: yes, will deconfigure %s (broken by %s).\n"
msgstr "dpkg：好的，将反配置 %s (被 %s 破坏)。\n"

#: src/archives.c:947 src/archives.c:1068
#, c-format
msgid ""
"dpkg: regarding %s containing %s:\n"
"%s"
msgstr ""
"dpkg：关于含有 %2$s 的 %1$s：\n"
"%3$s"

#: src/archives.c:955
msgid "ignoring breakage, may proceed anyway!"
msgstr "忽视软件包间的破坏，无论怎样，继续安装！"

#: src/archives.c:960
#, c-format
msgid ""
"installing %.250s would break %.250s, and\n"
" deconfiguration is not permitted (--auto-deconfigure might help)"
msgstr ""
"安装 %.250s 将破坏 %.250s，并且\n"
"不允许反配置(--auto-deconfigure 也许会有帮助)"

#: src/archives.c:964
#, c-format
msgid "installing %.250s would break existing software"
msgstr "安装 %.250s 将破坏现有软件"

#: src/archives.c:994
#, c-format
msgid "dpkg: considering removing %s in favour of %s ...\n"
msgstr "dpkg：为了 %2$s，正考虑卸载 %1$s ...\n"

#: src/archives.c:1000
#, c-format
msgid "%s is not properly installed - ignoring any dependencies on it.\n"
msgstr "%s 没有被正常安装 - 将忽略所有对它的依赖关系。\n"

#: src/archives.c:1029
#, c-format
msgid "dpkg: may have trouble removing %s, as it provides %s ...\n"
msgstr "dpkg：也许卸载 %s 会有问题，因为它提供了 %s ...\n"

#: src/archives.c:1044
#, c-format
msgid ""
"dpkg: package %s requires reinstallation, but will remove anyway as you "
"requested.\n"
msgstr ""
"dpkg：尽管软件包 %s 需要重新安装，但还是将遵照您的要求，\n"
"把它卸载。\n"

#: src/archives.c:1047
#, c-format
msgid "dpkg: package %s requires reinstallation, will not remove.\n"
msgstr "dpkg：软件包 %s 需要重新安装，它不会被卸载。\n"

#: src/archives.c:1054
#, c-format
msgid "package %s has too many Conflicts/Replaces pairs"
msgstr "软件包 %s 有太多的冲突/替换组合"

#: src/archives.c:1060
#, c-format
msgid "dpkg: yes, will remove %s in favour of %s.\n"
msgstr "dpkg：好的，为了 %2$s 卸载 %1$s。\n"

#: src/archives.c:1071
#, c-format
msgid "conflicting packages - not installing %.250s"
msgstr "软件包相互冲突 - 将不安装 %.250s"

#: src/archives.c:1072
msgid "ignoring conflict, may proceed anyway!"
msgstr "忽视软件包间的冲突，无论怎样，继续安装！"

#: src/archives.c:1113
#, c-format
msgid "--%s --recursive needs at least one path argument"
msgstr "--%s --递归执行需要至少一个路径作为参数"

#: src/archives.c:1123
#, fuzzy
msgid "find for dpkg --recursive"
msgstr "无法启用 --recursive 选项执行 find"

#: src/archives.c:1145
msgid "failed to fdopen find's pipe"
msgstr "无法 fdopen find 的管道"

#: src/archives.c:1151
msgid "error reading find's pipe"
msgstr "读取 find 的管道时出错"

#: src/archives.c:1152
msgid "error closing find's pipe"
msgstr "关闭 find 的管道时出错"

#: src/archives.c:1155
#, c-format
msgid "find for --recursive returned unhandled error %i"
msgstr "--recursive 选项所调用的 find 返回了一个没有被处理的错误 %i"

#: src/archives.c:1158
msgid "searched, but found no packages (files matching *.deb)"
msgstr "已搜索包文件，但是没有发现任何软件包(即与 *.deb 匹配的文件)"

#: src/archives.c:1174
#, c-format
msgid "--%s needs at least one package archive file argument"
msgstr "--%s 需要至少一个软件包文件作为参数"

#: src/archives.c:1206 src/enquiry.c:151 src/enquiry.c:256 src/enquiry.c:399
#: src/enquiry.c:401 src/enquiry.c:410 src/main.c:62 src/main.c:154
#: src/main.c:250 src/main.c:417 src/packages.c:233 src/query.c:186
#: src/query.c:283 src/query.c:322 src/query.c:331 src/query.c:378
#: src/query.c:441 src/query.c:576 src/query.c:620 src/select.c:77
#: src/statcmd.c:66 src/statcmd.c:96 src/trigcmd.c:60 src/trigcmd.c:92
#: dpkg-deb/build.c:394 dpkg-deb/extract.c:207 dpkg-deb/extract.c:227
#: dpkg-deb/info.c:192 dpkg-deb/info.c:236 dpkg-deb/main.c:61
#: dpkg-deb/main.c:124 dpkg-split/info.c:249 dpkg-split/main.c:53
#: dpkg-split/main.c:91 dpkg-split/queue.c:127 dpkg-split/queue.c:252
msgid "<standard output>"
msgstr "<标准输出>"

#: src/archives.c:1207 src/packages.c:234 src/query.c:187 src/query.c:281
#: src/query.c:384 src/query.c:442 src/select.c:78 dpkg-split/main.c:196
#: dpkg-split/queue.c:199
msgid "<standard error>"
msgstr "<标准错误>"

#: src/archives.c:1248
#, c-format
msgid "Selecting previously deselected package %s.\n"
msgstr "选中了曾被取消选择的软件包 %s。\n"

#: src/archives.c:1253
#, c-format
msgid "Skipping deselected package %s.\n"
msgstr "忽略了被取消选择的软件包 %s。\n"

#: src/archives.c:1270
#, c-format
msgid "Version %.250s of %.250s already installed, skipping.\n"
msgstr "%1$.250s 的 %2$.250s 版本已经安装，因而将不再安装它。\n"

#: src/archives.c:1281
#, c-format
msgid "downgrading %.250s from %.250s to %.250s."
msgstr "即将把 %.250s 从 %.250s 降级到 %.250s。"

#: src/archives.c:1286
#, c-format
msgid "Will not downgrade %.250s from version %.250s to %.250s, skipping.\n"
msgstr "由于不希望把 %.250s 从 %.250s 降级到 %.250s，因而将不再安装它。\n"

#: src/cleanup.c:85
#, c-format
msgid ""
"unable to remove newly-installed version of `%.250s' to allow reinstallation "
"of backup copy"
msgstr "无法把新近安装版本的”%.250s“卸载，卸载它能就能重新安装备份复制"

#: src/cleanup.c:92
#, c-format
msgid "unable to restore backup version of `%.250s'"
msgstr "无法恢复“%.250s”的备份版本"

#: src/cleanup.c:96
#, c-format
msgid "unable to remove newly-installed version of `%.250s'"
msgstr "无法删除“%.250s”的新近安装的版本"

#: src/cleanup.c:103
#, c-format
msgid "unable to remove newly-extracted version of `%.250s'"
msgstr "无法删除“%.250s”的新近解压的版本"

#: src/configure.c:101
#, c-format
msgid "unable to stat new dist conffile `%.250s'"
msgstr "无法获取新发布版的 conffile “%.250s”的信息"

#: src/configure.c:110
#, c-format
msgid "unable to stat current installed conffile `%.250s'"
msgstr "无法获取当前已被安装的 conffile “%.250s”的信息"

#: src/configure.c:122
#, c-format
msgid ""
"\n"
"Configuration file `%s', does not exist on system.\n"
"Installing new config file as you requested.\n"
msgstr ""
"\n"
"系统中并未发现配置“%s”。\n"
"如您所愿，安装了新的配置文件。\n"

#: src/configure.c:159
#, c-format
msgid "%s: failed to remove old backup '%.250s': %s"
msgstr "%s：无法删除以前的备份文件“%.250s”：%s"

#: src/configure.c:167
#, c-format
msgid "%s: failed to rename '%.250s' to '%.250s': %s"
msgstr "%s：无法将“%.250s”改名为“%.250s”：%s"

#: src/configure.c:173
#, c-format
msgid "%s: failed to remove '%.250s': %s"
msgstr "%s：删除“%.250s”失败：%s"

#: src/configure.c:179
#, c-format
msgid "%s: failed to remove old distrib version '%.250s': %s"
msgstr "%s：无法删除以前的发布版本“%.250s”：%s"

#: src/configure.c:183
#, c-format
msgid "%s: failed to remove '%.250s' (before overwrite): %s"
msgstr "%s：无法删除“%.250s”(在覆盖前)：%s"

#: src/configure.c:187
#, c-format
msgid "%s: failed to link '%.250s' to '%.250s': %s"
msgstr "%s：将“%.250s”链接到“%.250s”失败：%s"

#: src/configure.c:191
#, c-format
msgid "Installing new version of config file %s ...\n"
msgstr "正在安装新版本的配置文件 %s ...\n"

#: src/configure.c:197
#, c-format
msgid "unable to install `%.250s' as `%.250s'"
msgstr "无法把“%.250s”安装到“%.250s”"

#: src/configure.c:248
#, c-format
msgid "no package named `%s' is installed, cannot configure"
msgstr "您未曾安装名为“%s”的软件包，因而不能对它进行配置"

#: src/configure.c:251
#, c-format
msgid "package %.250s is already installed and configured"
msgstr "您已经安装并配置了软件包 %.250s"

#: src/configure.c:254
#, c-format
msgid ""
"package %.250s is not ready for configuration\n"
" cannot configure (current status `%.250s')"
msgstr ""
"现在尚不能配置软件包 %.250s\n"
" 不能配置(目前状态为“%.250s”)"

#: src/configure.c:283
#, c-format
msgid ""
"dpkg: dependency problems prevent configuration of %s:\n"
"%s"
msgstr ""
"dpkg：依赖关系问题使得 %s 的配置工作不能继续：\n"
"%s"

#: src/configure.c:286
msgid "dependency problems - leaving unconfigured"
msgstr "依赖关系问题 - 仍未被配置"

#: src/configure.c:290
#, c-format
msgid ""
"dpkg: %s: dependency problems, but configuring anyway as you requested:\n"
"%s"
msgstr ""
"dpkg：%s：尽管有依赖关系的问题，但不管怎样，还是按照您的要求，继续配置：\n"
"%s"

#: src/configure.c:298
msgid ""
"Package is in a very bad inconsistent state - you should\n"
" reinstall it before attempting configuration."
msgstr ""
"该软件包正处于非常不稳定的状态 - 您最好\n"
"在配置它之前，先重新安装它。"

#: src/configure.c:301
#, c-format
msgid "Setting up %s (%s) ...\n"
msgstr "正在设置 %s (%s) ...\n"

#: src/configure.c:384
#, c-format
msgid ""
"%s: unable to stat config file '%s'\n"
" (= '%s'): %s"
msgstr ""
"%s：无法获得配置文件“%s”的状态\n"
" (= “%s”)：%s"

#: src/configure.c:397
#, c-format
msgid ""
"%s: config file '%s' is a circular link\n"
" (= '%s')"
msgstr ""
"%s：配置文件“%s”是一个循环(最终指向自己)链接\n"
" (= “%s”)"

#: src/configure.c:406
#, c-format
msgid ""
"%s: unable to readlink conffile '%s'\n"
" (= '%s'): %s"
msgstr ""
"%s：无法 readlink conffile “%s”\n"
" (= “%s”)：%s"

#: src/configure.c:428
#, c-format
msgid ""
"%s: conffile '%.250s' resolves to degenerate filename\n"
" ('%s' is a symlink to '%s')"
msgstr ""
"%s：无法找到 conffile “%.250s”最终指向的文件\n"
" (“%s”是一个指向“%s”的符号链接)"

#: src/configure.c:443
#, c-format
msgid "%s: conffile '%.250s' is not a plain file or symlink (= '%s')"
msgstr "%s：警告 - conffile “%.250s”不是普通文件或者符号链接 (= “%s”)"

#: src/configure.c:469
msgid "md5hash"
msgstr "md5hash"

#: src/configure.c:475
#, c-format
msgid "%s: unable to open conffile %s for hash: %s"
msgstr "%s：无法打开 conffile %s 来作哈希处理：%s"

#: src/configure.c:511
#, c-format
msgid "failed to run %s (%.250s)"
msgstr "无法运行 %s (%.250s)"

#: src/configure.c:532
msgid "Type `exit' when you're done.\n"
msgstr "当您完成操作后，请输入“exit”。\n"

#: src/configure.c:549
#, c-format
msgid "failed to exec shell (%.250s)"
msgstr "无法执行 shell (%.250s)"

#: src/configure.c:599
#, c-format
msgid ""
"\n"
"Configuration file `%s'"
msgstr ""
"\n"
"配置文件“%s”"

#: src/configure.c:601
#, c-format
msgid " (actually `%s')"
msgstr "(实际上是“%s”)"

#: src/configure.c:605
#, c-format
msgid ""
"\n"
" ==> File on system created by you or by a script.\n"
" ==> File also in package provided by package maintainer.\n"
msgstr ""
"\n"
" ==> 系统中的这个文件或者是由您创建的，或者是由脚本建立的。\n"
" ==> 软件包维护者所提供的软件包中也包含了该文件。\n"

#: src/configure.c:610
#, c-format
msgid ""
"\n"
"     Not modified since installation.\n"
msgstr ""
"\n"
"     在安装后未曾更动。\n"

#: src/configure.c:612
#, c-format
msgid ""
"\n"
" ==> Modified (by you or by a script) since installation.\n"
msgstr ""
"\n"
" ==> 在安装后曾被修改(您或者某个脚本修改了它)。\n"

#: src/configure.c:613
#, c-format
msgid ""
"\n"
" ==> Deleted (by you or by a script) since installation.\n"
msgstr ""
"\n"
" ==> 在安装后曾被删除(您或者某个脚本删除了它)。\n"

#: src/configure.c:616
#, c-format
msgid " ==> Package distributor has shipped an updated version.\n"
msgstr " ==> 软件包的提交者同时提供了一个更新了的版本。\n"

#: src/configure.c:617
#, c-format
msgid "     Version in package is the same as at last installation.\n"
msgstr "     软件包的版本和上次安装的版本是相同的。\n"

#: src/configure.c:625
#, c-format
msgid " ==> Using new file as you requested.\n"
msgstr " ==> 如您所愿，安装了新的配置文件。\n"

#: src/configure.c:629
#, c-format
msgid " ==> Using current old file as you requested.\n"
msgstr " ==> 如您所愿，保留原来的配置文件不变。\n"

#: src/configure.c:638
#, c-format
msgid " ==> Keeping old config file as default.\n"
msgstr " ==> 按照默认设置，保留原有的配置文件。\n"

#: src/configure.c:642
#, c-format
msgid " ==> Using new config file as default.\n"
msgstr " ==> 按照默认设置，安装新的配置文件。\n"

#: src/configure.c:649
#, fuzzy, c-format
msgid ""
"   What would you like to do about it ?  Your options are:\n"
"    Y or I  : install the package maintainer's version\n"
"    N or O  : keep your currently-installed version\n"
"      D     : show the differences between the versions\n"
"      Z     : start a shell to examine the situation\n"
msgstr ""
"   您现在希望如何处理呢？ 您有以下几个选择：\n"
"    Y 或 I  ：安装软件包维护者所提供的版本\n"
"    N 或 O  ：保留您原来安装的版本\n"
"      D     ：显示两者的区别\n"
"      Z     ：把当前进程切换到后台，然后查看现在的具体情况\n"

#: src/configure.c:656
#, c-format
msgid " The default action is to keep your current version.\n"
msgstr " 默认的处理方法是保留您当前使用的版本。\n"

#: src/configure.c:658
#, c-format
msgid " The default action is to install the new version.\n"
msgstr " 默认的处理办法是安装新的版本。\n"

#: src/configure.c:665
msgid "[default=N]"
msgstr "[默认选项=N]"

#: src/configure.c:666
msgid "[default=Y]"
msgstr "[默认选项=Y]"

#: src/configure.c:667
msgid "[no default]"
msgstr "[无默认选项]"

#: src/configure.c:670
msgid "error writing to stderr, discovered before conffile prompt"
msgstr "在 conffile 提示输入前写标准错误出错"

#: src/configure.c:679
msgid "read error on stdin at conffile prompt"
msgstr "在 conffile 提示输入时读取标准输入出错"

#: src/configure.c:680
msgid "EOF on stdin at conffile prompt"
msgstr "在 conffile 提示输入时在标准输入读到了 EOF "

#: src/depcon.c:82
#, c-format
msgid "unable to check for existence of `%.250s'"
msgstr "无法检查“%.250s”是否存在"

#: src/depcon.c:176
#, c-format
msgid "%s depends on %s"
msgstr "%s 依赖于 %s"

#: src/depcon.c:179
#, c-format
msgid "%s pre-depends on %s"
msgstr "%s 预依赖于 %s"

#: src/depcon.c:182
#, c-format
msgid "%s recommends %s"
msgstr "%s 推荐 %s"

#: src/depcon.c:185
#, c-format
msgid "%s suggests %s"
msgstr "%s 建议 %s"

#: src/depcon.c:188
#, c-format
msgid "%s breaks %s"
msgstr "%s 破坏 %s"

#: src/depcon.c:191
#, c-format
msgid "%s conflicts with %s"
msgstr "%s 冲突于 %s"

#: src/depcon.c:194
#, c-format
msgid "%s enhances %s"
msgstr "%s 增强 %s"

#: src/depcon.c:289
#, c-format
msgid "  %.250s is to be removed.\n"
msgstr "  即将卸载 %.250s。\n"

#: src/depcon.c:292
#, c-format
msgid "  %.250s is to be deconfigured.\n"
msgstr "  即将反配置 %.250s。\n"

#: src/depcon.c:297
#, c-format
msgid "  %.250s is to be installed, but is version %.250s.\n"
msgstr "  即将安装 %.250s，但安装的版本是 %.250s。\n"

#: src/depcon.c:307
#, c-format
msgid "  %.250s is installed, but is version %.250s.\n"
msgstr "  已安装 %.250s，但安装的版本是 %.250s。\n"

#: src/depcon.c:323
#, c-format
msgid "  %.250s is unpacked, but has never been configured.\n"
msgstr "  已解包 %.250s，但仍未配置。\n"

#: src/depcon.c:327
#, c-format
msgid "  %.250s is unpacked, but is version %.250s.\n"
msgstr "  已解包 %.250s，但它的版本是 %.250s。\n"

#: src/depcon.c:333
#, c-format
msgid "  %.250s latest configured version is %.250s.\n"
msgstr "  上次配置 %.250s 时，它的版本是 %.250s。\n"

#: src/depcon.c:343
#, c-format
msgid "  %.250s is %s.\n"
msgstr "  %.250s 现在 %s。\n"

#: src/depcon.c:380
#, c-format
msgid "  %.250s provides %.250s but is to be removed.\n"
msgstr "  %.250s 提供了 %.250s，但是它即将被删除。\n"

#: src/depcon.c:384
#, c-format
msgid "  %.250s provides %.250s but is to be deconfigured.\n"
msgstr "  %.250s 提供了 %.250s，但是它的配置信息将被抹去。\n"

#: src/depcon.c:390
#, c-format
msgid "  %.250s provides %.250s but is %s.\n"
msgstr "  %.250s 提供了 %.250s，但是它现在 %s。\n"

#: src/depcon.c:405
#, c-format
msgid "  %.250s is not installed.\n"
msgstr "  %.250s 未安装。\n"

#: src/depcon.c:436
#, c-format
msgid "  %.250s (version %.250s) is to be installed.\n"
msgstr "  即将安装 %.250s (版本为 %.250s)。\n"

#: src/depcon.c:459
#, c-format
msgid "  %.250s (version %.250s) is present and %s.\n"
msgstr "  %.250s (版本为 %.250s)已存在并且 %s。\n"

#: src/depcon.c:486
#, c-format
msgid "  %.250s provides %.250s and is to be installed.\n"
msgstr "  %.250s 提供了 %.250s，它将被安装。\n"

#: src/depcon.c:526
#, c-format
msgid "  %.250s provides %.250s and is present and %s.\n"
msgstr "  %.250s 提供了 %.250s 并已存在而且 %s。\n"

#: src/divertdb.c:66
msgid "failed to open diversions file"
msgstr "无法打开转移项文件"

#: src/divertdb.c:73
msgid "failed to fstat previous diversions file"
msgstr "无法 fstat 原有的转移项文件"

#: src/divertdb.c:75
msgid "failed to fstat diversions file"
msgstr "无法 fstat 转移项文件"

#: src/divertdb.c:115
#, c-format
msgid "conflicting diversions involving `%.250s' or `%.250s'"
msgstr "转移项间存在着冲突关系，“%.250s”和“%.250s”中只能取其一"

#: src/enquiry.c:71
msgid ""
"The following packages are in a mess due to serious problems during\n"
"installation.  They must be reinstalled for them (and any packages\n"
"that depend on them) to function properly:\n"
msgstr ""
"由于在安装过程中遇到严重的问题，下列软件包的状态存在严重问题。\n"
"若要令其运行正常，您必须重新安装它们\n"
"(以及所有依赖于它们的软件包)：\n"

#: src/enquiry.c:78
msgid ""
"The following packages have been unpacked but not yet configured.\n"
"They must be configured using dpkg --configure or the configure\n"
"menu option in dselect for them to work:\n"
msgstr ""
"下列软件包已被解开，但是尚未配置。\n"
"要令它们运行正常，您必须借助 dpkg --configure\n"
"或者 dselect 菜单中的配置项：\n"

#: src/enquiry.c:85
msgid ""
"The following packages are only half configured, probably due to problems\n"
"configuring them the first time.  The configuration should be retried using\n"
"dpkg --configure <package> or the configure menu option in dselect:\n"
msgstr ""
"下列软件包只是被不全面地配置了，这也许要归咎于\n"
"第一次配置它们时出的问题。您最好能重新配置它们。\n"
"借助 dpkg --configure <软件包名> 或者用 dselect \n"
"菜单中的配置项重新配置软件包：\n"

#: src/enquiry.c:92
msgid ""
"The following packages are only half installed, due to problems during\n"
"installation.  The installation can probably be completed by retrying it;\n"
"the packages can be removed using dselect or dpkg --remove:\n"
msgstr ""
"下列软件包被不完整地安装了，这要归咎于\n"
"安装时出的问题。再试一次可能就能完成安装；\n"
"借助 dselect 或 dpkg --remove 可以把这些软件包删除：\n"

#: src/enquiry.c:99
msgid ""
"The following packages are awaiting processing of triggers that they\n"
"have activated in other packages.  This processing can be requested using\n"
"dselect or dpkg --configure --pending (or dpkg --triggers-only):\n"
msgstr ""
"下列软件包正在等待由它们在其他软件包激活的触发器处理。\n"
"该处理可以使用 dselect 或者 dpkg --configure --pending\n"
"(或者 dpkg --triggers-only)来请求：\n"

#: src/enquiry.c:106
msgid ""
"The following packages have been triggered, but the trigger processing\n"
"has not yet been done.  Trigger processing can be requested using\n"
"dselect or dpkg --configure --pending (or dpkg --triggers-only):\n"
msgstr ""
"下列软件包被触发，但触发器处理尚未完成。触发器处理可以使用 dselect 或者 \n"
"dpkg --configure --pending (或者 dpkg --triggers-only)来请求：\n"

#: src/enquiry.c:132 src/enquiry.c:191 src/enquiry.c:267 src/enquiry.c:330
#: src/enquiry.c:406 src/select.c:92 src/select.c:149 src/trigcmd.c:199
#: src/update.c:44 src/update.c:100 dpkg-split/queue.c:211
#, c-format
msgid "--%s takes no arguments"
msgstr "--%s 不需要任何参数"

#: src/enquiry.c:173
msgid "<unknown>"
msgstr "<未知>"

#: src/enquiry.c:230
#, c-format
msgid " %d in %s: "
msgstr "在 %2$s 有 %1$d 个："

#: src/enquiry.c:245
#, c-format
msgid " %d packages, from the following sections:"
msgstr " 在下列类别中，有 %d 个软件包："

#: src/enquiry.c:280
#, c-format
msgid ""
"Version of dpkg with working %s support not yet configured.\n"
" Please use 'dpkg --configure dpkg', and then try again.\n"
msgstr ""
"带有可工作 %s 支持的 dpkg 版本尚未配置好。\n"
" 请运行“dpkg --configure dpkg”，然后再尝试。\n"

#: src/enquiry.c:285
#, c-format
msgid "dpkg not recorded as installed, cannot check for %s support!\n"
msgstr "记录中显示，dpkg 没有被安装，因而不能断定它是否支持 %s！\n"

#: src/enquiry.c:293
msgid "Pre-Depends field"
msgstr "预依赖域"

#: src/enquiry.c:298
msgid "epoch"
msgstr "版次"

#: src/enquiry.c:303
msgid "long filenames"
msgstr "长文件名"

#: src/enquiry.c:308
msgid "multiple Conflicts and Replaces"
msgstr "多个冲突和替换"

#: src/enquiry.c:385
#, c-format
msgid ""
"dpkg: cannot see how to satisfy pre-dependency:\n"
" %s\n"
msgstr ""
"dpkg：无法推测该如何满足预依赖关系：\n"
" %s\n"

#: src/enquiry.c:386
#, c-format
msgid "cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)"
msgstr "无法满足 %.250s 的预依赖关系，起因是 %.250s"

#: src/enquiry.c:416
#, c-format
msgid "obsolete option '--%s', please use '--%s' instead."
msgstr "废弃的选项“--%s”，请使用“--%s”"

#: src/enquiry.c:457
msgid ""
"--compare-versions takes three arguments: <version> <relation> <version>"
msgstr ""
"--compare-version 需要三个参数，它们分别是：<版本号> <比较关系> <版本号>"

#: src/enquiry.c:462
msgid "--compare-versions bad relation"
msgstr "--compare-versions 错误的比较关系"

#: src/enquiry.c:467 src/enquiry.c:474
#, c-format
msgid "version '%s' has bad syntax: %s"
msgstr "版本号“%s”有语法错误：%s"

#: src/errors.c:60
#, c-format
msgid ""
"%s: error processing %s (--%s):\n"
" %s\n"
msgstr ""
"%s：处理 %s (--%s)时出错：\n"
" %s\n"

#: src/errors.c:67
msgid ""
"dpkg: failed to allocate memory for new entry in list of failed packages."
msgstr "dpkg：在无法处理的软件包列表中添加表项时，申请表项所需的内存失败。"

#: src/errors.c:77
#, c-format
msgid "dpkg: too many errors, stopping\n"
msgstr "dpkg：出现过多错误，正在终止\n"

#: src/errors.c:83
msgid "Errors were encountered while processing:\n"
msgstr "在处理时有错误发生：\n"

#: src/errors.c:90
msgid "Processing was halted because there were too many errors.\n"
msgstr "由于出现了太多错误，处理过程被终止了。\n"

#: src/errors.c:101
#, c-format
msgid "Package %s was on hold, processing it anyway as you requested\n"
msgstr "软件包 %s 本来被要求保持原来的版本，但还是如您所愿，继续对它进行操作\n"

#: src/errors.c:105
#, c-format
msgid ""
"Package %s is on hold, not touching it.  Use --force-hold to override.\n"
msgstr ""
"软件包 %s 被要求保持原来的版本，因而不会去改动它。请使用 --force-hold 选项来"
"忽略该设置。\n"

#: src/errors.c:114
msgid "overriding problem because --force enabled:"
msgstr "由于开启了 --force 选项，以下问题被忽略："

#: src/filesdb.c:214
#, c-format
msgid "unable to open files list file for package `%.250s'"
msgstr "无法打开软件包“%.250s”的文件名列表文件"

#: src/filesdb.c:218
#, c-format
msgid ""
"files list file for package `%.250s' missing, assuming package has no files "
"currently installed."
msgstr ""
"无法找到软件包“%.250s”的文件名列表文件，现假定该软件包目前没有任何文件被安装"
"在系统里。"

#: src/filesdb.c:229
#, c-format
msgid "unable to stat files list file for package '%.250s'"
msgstr "无法取得软件包“%.250s”的文件名列表文件"

#: src/filesdb.c:236
#, c-format
msgid "files list for package `%.250s'"
msgstr "软件包“%.250s”的文件名列表文件"

#: src/filesdb.c:242
#, c-format
msgid "files list file for package '%.250s' is missing final newline"
msgstr "软件包“%.250s”的文件名列表文件最后结尾的换行符"

#: src/filesdb.c:250
#, c-format
msgid "files list file for package `%.250s' contains empty filename"
msgstr "软件包“%.250s”的文件名列表文件含有空的文件名"

#: src/filesdb.c:258
#, c-format
msgid "error closing files list file for package `%.250s'"
msgstr "关闭软件包“%.250s”的文件名列表文件时出错"

#: src/filesdb.c:368
msgid "(Reading database ... "
msgstr "(正在读取数据库 ... "

#: src/filesdb.c:389
#, c-format
msgid "%d files and directories currently installed.)\n"
msgstr "系统当前共安装有 %d 个文件和目录。)\n"

#: src/filesdb.c:419
#, c-format
msgid "unable to create updated files list file for package %s"
msgstr "无法为软件包 %s 新建更新后的文件名列表文件"

#: src/filesdb.c:429
#, c-format
msgid "failed to write to updated files list file for package %s"
msgstr "无法写入更新后的软件包 %s 的文件名列表文件"

#: src/filesdb.c:431
#, c-format
msgid "failed to flush updated files list file for package %s"
msgstr "无法刷新更新后的软件包 %s 的文件名列表文件"

#: src/filesdb.c:433
#, c-format
msgid "failed to sync updated files list file for package %s"
msgstr "无法同步更新后的软件包 %s 的文件名列表文件"

#: src/filesdb.c:436
#, c-format
msgid "failed to close updated files list file for package %s"
msgstr "无法关闭更新后的软件包 %s 的文件名列表文件"

#: src/filesdb.c:438
#, c-format
msgid "failed to install updated files list file for package %s"
msgstr "无法安装更新后的软件包 %s 的文件名列表文件"

#: src/help.c:48
msgid "not installed"
msgstr "未安装"

#: src/help.c:49
msgid "not installed but configs remain"
msgstr "未安装，但是其配置文件仍存留于系统中"

#: src/help.c:50
msgid "broken due to failed removal or installation"
msgstr "由于移除或安装失败而处于残损的状态"

#: src/help.c:51
msgid "unpacked but not configured"
msgstr "已解包，但尚未配置"

#: src/help.c:52
msgid "broken due to postinst failure"
msgstr "由于安装后操作(postinst)失败，未能完成安装"

#: src/help.c:53
msgid "awaiting trigger processing by another package"
msgstr "等待另一软件包的触发器处理"

#: src/help.c:54
msgid "triggered"
msgstr "已触发"

#: src/help.c:55
msgid "installed"
msgstr "已安装"

#: src/help.c:106
msgid "error: PATH is not set."
msgstr "错误：没有设置 PATH 环境变量。"

#: src/help.c:128
#, fuzzy, c-format
msgid "'%s' not found in PATH or not executable."
msgstr "在 PATH 环境变量中找不到“%s”。"

#: src/help.c:136
#, fuzzy, c-format
msgid ""
"%d expected program(s) not found in PATH or not executable.\n"
"NB: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin."
msgstr ""
"共有 %d 个程序没在 PATH 中找到。\n"
"提示：root 的 PATH 环境变量通常应当包含 /usr/local/sbin、/usr/sbin 和 /sbin"

#: src/help.c:184
#, c-format
msgid "failed to chroot to `%.250s'"
msgstr "无法 chroot 到“%.250s”目录"

#: src/help.c:186 dpkg-deb/build.c:408 dpkg-deb/build.c:481
#: dpkg-deb/build.c:504
#, c-format
msgid "failed to chdir to `%.255s'"
msgstr "chdir 到“%.255s”失败"

#: src/help.c:246
#, c-format
msgid "unable to set execute permissions on `%.250s'"
msgstr "无法设置 %s 的执行权限位"

#: src/help.c:266
msgid "unable to setenv for maintainer script"
msgstr "无法为维护脚本设置环境变量"

#: src/help.c:289
#, c-format
msgid "installed %s script"
msgstr "已安装 %s 脚本"

#: src/help.c:302 src/help.c:368 src/help.c:427
#, c-format
msgid "unable to stat %s `%.250s'"
msgstr "无法获取 %s “%.250s”的状态"

#: src/help.c:354 src/help.c:414
#, c-format
msgid "new %s script"
msgstr "新的 %s 脚本"

#: src/help.c:388
#, c-format
msgid "old %s script"
msgstr "旧的 %s 脚本"

#: src/help.c:402
#, c-format
msgid "unable to stat %s '%.250s': %s"
msgstr "无法获取 %s “%.250s”的状态：%s"

#: src/help.c:411
#, c-format
msgid "dpkg - trying script from the new package instead ...\n"
msgstr "dpkg - 现在尝试使用新软件包所带的脚本...\n"

#: src/help.c:425
msgid "there is no script in the new version of the package - giving up"
msgstr "新版本的软件包里没有脚本 - 取消操作"

#: src/help.c:431
#, c-format
msgid "dpkg: ... it looks like that went OK.\n"
msgstr "dpkg：... 看起来它能正确执行。\n"

#: src/help.c:577
#, c-format
msgid "unable to securely remove '%.255s'"
msgstr "无法安全删除“%.255s”"

#: src/help.c:582 dpkg-deb/info.c:63
msgid "failed to exec rm for cleanup"
msgstr "无法运行 rm 来执行清理"

#: src/main.c:56
#, c-format
msgid "Debian `%s' package management program version %s.\n"
msgstr "Debian %s 软件包管理程序 %s 版。\n"

#: src/main.c:59 src/query.c:573 src/statcmd.c:63 src/trigcmd.c:57
#: dpkg-deb/main.c:58 dpkg-split/main.c:50 scripts/dpkg-divert.pl:39
#, fuzzy, c-format
msgid ""
"This is free software; see the GNU General Public License version 2 or\n"
"later for copying conditions. There is NO warranty.\n"
msgstr ""
"此软件是自由软件；要获知复制该软件的条件，请参阅 GNU 公共许可证\n"
"第二版或其更新的版本。本软件【不】提供任何担保。\n"

#: src/main.c:74 src/query.c:585 src/statcmd.c:75 dpkg-deb/main.c:70
#: dpkg-split/main.c:62
#, c-format
msgid ""
"Usage: %s [<option> ...] <command>\n"
"\n"
msgstr ""
"用法：%s [<选项> ...] <命令>\n"
"\n"

#: src/main.c:78
#, c-format
msgid ""
"Commands:\n"
"  -i|--install       <.deb file name> ... | -R|--recursive <directory> ...\n"
"  --unpack           <.deb file name> ... | -R|--recursive <directory> ...\n"
"  -A|--record-avail  <.deb file name> ... | -R|--recursive <directory> ...\n"
"  --configure        <package> ... | -a|--pending\n"
"  --triggers-only    <package> ... | -a|--pending\n"
"  -r|--remove        <package> ... | -a|--pending\n"
"  -P|--purge         <package> ... | -a|--pending\n"
"  --get-selections [<pattern> ...] Get list of selections to stdout.\n"
"  --set-selections                 Set package selections from stdin.\n"
"  --clear-selections               Deselect every non-essential package.\n"
"  --update-avail <Packages-file>   Replace available packages info.\n"
"  --merge-avail <Packages-file>    Merge with info from file.\n"
"  --clear-avail                    Erase existing available info.\n"
"  --forget-old-unavail             Forget uninstalled unavailable pkgs.\n"
"  -s|--status <package> ...        Display package status details.\n"
"  -p|--print-avail <package> ...   Display available version details.\n"
"  -L|--listfiles <package> ...     List files `owned' by package(s).\n"
"  -l|--list [<pattern> ...]        List packages concisely.\n"
"  -S|--search <pattern> ...        Find package(s) owning file(s).\n"
"  -C|--audit                       Check for broken package(s).\n"
"  --print-architecture             Print dpkg architecture.\n"
"  --compare-versions <a> <op> <b>  Compare version numbers - see below.\n"
"  --force-help                     Show help on forcing.\n"
"  -Dh|--debug=help                 Show help on debugging.\n"
"\n"
msgstr ""
"命令：\n"
"  -i|--install       <.deb 文件名> ... | -R|--recursive <目录> ...\n"
"  --unpack           <.deb 文件名> ... | -R|--recursive <目录> ...\n"
"  -A|--record-avail  <.deb 文件名> ... | -R|--recursive <目录> ...\n"
"  --configure        <软件包名> ... | -a|--pending\n"
"  --triggers-only    <软件包名> ... | -a|--pending\n"
"  -r|--remove        <软件包名> ... | -a|--pending\n"
"  -P|--purge         <软件包名> ... | -a|--pending\n"
"  --get-selections [<表达式> ...]  把已选中的软件包列表打印到标准输出。\n"
"  --set-selections                 从标准输入里读出要选择的软件。\n"
"  --clear-selections               取消选中所有不必要的软件包。\n"
"  --update-avail <软件包文件>      替换现有可安装的软件包信息。\n"
"  --merge-avail <软件包文件>       把文件中的信息合并到系统中。\n"
"  --clear-avail                    清除现有的软件包信息。\n"
"  --forget-old-unavail             忘却已被卸载的不可安装的软件包。\n"
"  -s|--status <软件包名> ...       显示软件包详尽的状态信息。\n"
"  -p|--print-avail <软件包名> ...  显示可供安装的版本详情。\n"
"  -L|--listfiles <软件包名> ...    列出所有“属于”该软件包(或多个)的文件。\n"
"  -l|--list [<表达式> ...          简明地列出软件包的状态。\n"
"  -S|--search <表达式> ...         搜寻拥有该文件(或多个文件)的包。\n"
"  -C|--audit                       检查搜寻残损的软件包。\n"
"  --print-architecture             显示 dpkg 体系架构。\n"
"  --compare-vesions <a> <关系> <b> 比较版本号 - 见下。\n"
"  --force-help                     显示本强制选项的帮助信息。\n"
"  -Dh|--debug=help                 显示有关出错调试的帮助信息。\n"
"\n"

#: src/main.c:106 src/query.c:601 src/trigcmd.c:79 dpkg-deb/main.c:87
#: dpkg-split/main.c:76
#, fuzzy, c-format
msgid ""
"  -h|--help                        Show this help message.\n"
"  --version                        Show the version.\n"
"\n"
msgstr ""
"  -h|--help                        显示本帮助信息。\n"
"  --version                        显示版本信息。\n"
"  --license | --licence            显示版权和许可证条文。\n"
"\n"

#: src/main.c:111
#, c-format
msgid ""
"Use dpkg -b|--build|-c|--contents|-e|--control|-I|--info|-f|--field|\n"
" -x|--extract|-X|--vextract|--fsys-tarfile  on archives (type %s --help).\n"
"\n"
msgstr ""
"对归档文件使用 dpkg -b|--build|-c|--contents|-e|--control|-I|--info|-f|--"
"field|\n"
"  -x|--extract|-X|--vextract|--fsys-tarfile (输入 %s --help)。\n"
"\n"

#: src/main.c:116
#, c-format
msgid ""
"For internal use: dpkg --assert-support-predepends | --predep-package |\n"
"  --assert-working-epoch | --assert-long-filenames | --assert-multi-conrep.\n"
"\n"
msgstr ""
"供内部使用：dpkg  --assert-support-predepends | --predep-package |\n"
"  --assert-working-epoch | --assert-long-filenames | --assert-multi-"
"conrep。\n"
"\n"

#: src/main.c:121
#, c-format
msgid ""
"Options:\n"
"  --admindir=<directory>     Use <directory> instead of %s.\n"
"  --root=<directory>         Install on a different root directory.\n"
"  --instdir=<directory>      Change installation dir without changing admin "
"dir.\n"
"  -O|--selected-only         Skip packages not selected for install/"
"upgrade.\n"
"  -E|--skip-same-version     Skip packages whose same version is installed.\n"
"  -G|--refuse-downgrade      Skip packages with earlier version than "
"installed.\n"
"  -B|--auto-deconfigure      Install even if it would break some other "
"package.\n"
"  --[no-]triggers            Skip or force consequential trigger "
"processing.\n"
"  --no-debsig                Do not try to verify package signatures.\n"
"  --no-act|--dry-run|--simulate\n"
"                             Just say what we would do - don't do it.\n"
"  -D|--debug=<octal>         Enable debugging (see -Dhelp or --debug=help).\n"
"  --status-fd <n>            Send status change updates to file descriptor "
"<n>.\n"
"  --log=<filename>           Log status changes and actions to <filename>.\n"
"  --ignore-depends=<package>,...\n"
"                             Ignore dependencies involving <package>.\n"
"  --force-...                Override problems (see --force-help).\n"
"  --no-force-...|--refuse-...\n"
"                             Stop when problems encountered.\n"
"  --abort-after <n>          Abort after encountering <n> errors.\n"
"\n"
msgstr ""
"选项：\n"
"  --admindir=<目录>          使用 <目录> 而非 %s。\n"
"  --root=<目录>              安装到另一个根文件系统。\n"
"  --instdir=<目录>           改变安装的根目录的同时保持管理目录不变。\n"
"  -O|--selected-only         忽略没有被选中安装或升级的软件包。\n"
"  -E|--skip-same-version     忽略版本与已安装软件版本相同的软件包。\n"
"  -G|--refuse-downgrade      忽略版本早于已安装软件版本的的软件包。\n"
"  -B|--auto-deconfigure      就算会影响其他软件包，也要安装。\n"
"  --[no-]triggers            跳过或强制随之发生的触发器处理。\n"
"  --no-debsig                不去试图验证软件包的签名。\n"
"  --no-act|--dry-run|--simulate\n"
"                             仅报告要执行的操作 - 但是不执行。\n"
"  -D|--debug=<八进制数字>    开启调试功能(参见 -Dhelp 或者 --debug=help)。\n"
"  --status-fd <n>            发送状态改变的更新信号到文件描述符<n>。\n"
"  --log=<文件名>             把状态的更动和操作信息记录到 <文件名>。\n"
"  --ignore-depends=<软件包名>,...\n"
"                             忽略关于 <软件包名> 的所有依赖关系。\n"
"  --force-...                忽视遇到的问题(参见 --force-help)。\n"
"  --no-force-...|--refuse-...\n"
"                             当遇到问题时中止运行。\n"
"  --abort-after <n>          遇到<n>个错误后终止。\n"
"\n"

#: src/main.c:145
#, c-format
msgid ""
"Comparison operators for --compare-versions are:\n"
"  lt le eq ne ge gt       (treat empty version as earlier than any "
"version);\n"
"  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);\n"
"  < << <= = >= >> >       (only for compatibility with control file "
"syntax).\n"
"\n"
msgstr ""
"可供--compare-version 使用的比较运算符有：\n"
" lt le eq ne ge gt        (如果版本号为空，那么就认为它先于任意版本号)；\n"
" lt-nl le-nl ge-nl gt-nl  (如果版本号为空，那么就认为它后于任意版本号)；\n"
" < << <= = >= >> >        (仅仅是为了与主控文件的语法兼容)。\n"
"\n"

#: src/main.c:152
#, c-format
msgid "Use `dselect' or `aptitude' for user-friendly package management.\n"
msgstr "“dselect”和“aptitude”提供了更为易用的的软件包管理工具。\n"

#: src/main.c:162
#, fuzzy
msgid ""
"Type dpkg --help for help about installing and deinstalling packages [*];\n"
"Use `dselect' or `aptitude' for user-friendly package management;\n"
"Type dpkg -Dhelp for a list of dpkg debug flag values;\n"
"Type dpkg --force-help for a list of forcing options;\n"
"Type dpkg-deb --help for help about manipulating *.deb files;\n"
"\n"
"Options marked [*] produce a lot of output - pipe it through `less' or "
"`more' !"
msgstr ""
"输入 dpkg --help 可获得安装和卸载软件包的有关帮助 [*]；\n"
"使用“dselect”或是“aptitude”就能在友好的界面下管理软件包；\n"
"输入 dpkg -Dhelp 可看到 dpkg 除错标志的值的列表；\n"
"输入 dpkg --force-help 可获得所有强制操作选项的列表；\n"
"输入 dpkg-deb --help 可获得有关操作 *.deb 文件的帮助；\n"
"输入 dpkg --license 可阅读版权许可证和无担保的说明 (GNU GPL) [*]。\n"
"\n"
"带有 [*] 的选项将会输出较大篇幅的文字 - 可使用管道将其输出连接"
"到“less”或“more”！"

#: src/main.c:217 src/query.c:634 src/statcmd.c:112 dpkg-deb/main.c:198
#: dpkg-split/main.c:164
#, c-format
msgid "conflicting actions -%c (--%s) and -%c (--%s)"
msgstr "-%c (--%s) 和 -%c (--%s) 两个操作之间有矛盾"

#: src/main.c:223
#, c-format
msgid "obsolete option '--%s'\n"
msgstr "废弃的选项“--%s”\n"

#: src/main.c:231
#, c-format
msgid ""
"%s debugging option, --debug=<octal> or -D<octal>:\n"
"\n"
" number  ref. in source   description\n"
"      1   general           Generally helpful progress information\n"
"      2   scripts           Invocation and status of maintainer scripts\n"
"     10   eachfile          Output for each file processed\n"
"    100   eachfiledetail    Lots of output for each file processed\n"
"     20   conff             Output for each configuration file\n"
"    200   conffdetail       Lots of output for each configuration file\n"
"     40   depcon            Dependencies and conflicts\n"
"    400   depcondetail      Lots of dependencies/conflicts output\n"
"  10000   triggers          Trigger activation and processing\n"
"  20000   triggersdetail    Lots of output regarding triggers\n"
"  40000   triggersstupid    Silly amounts of output regarding triggers\n"
"   1000   veryverbose       Lots of drivel about eg the dpkg/info directory\n"
"   2000   stupidlyverbose   Insane amounts of drivel\n"
"\n"
"Debugging options are be mixed using bitwise-or.\n"
"Note that the meanings and values are subject to change.\n"
msgstr ""
"%s 除错选项，--debug=<八进制数字> 或 -D<八进制数字>：\n"
"\n"
"   数字  源代码中的对应   解释\n"
"      1   常规              常规的辅助进度信息\n"
"      2   脚本              维护者脚本的状态及对其的调用\n"
"     10   每个文件          操作每个文件的输出\n"
"    100   每个文件细节      操作每个文件的大量输出\n"
"     20   配置文件          每个配置文件的输出\n"
"    200   配置文件细节      每个配置文件的大量输出\n"
"     40   依赖和冲突        依赖和冲突\n"
"    400   依赖和冲突细节    依赖和冲突细节\n"
"  10000   触发器            触发器激活和处理\n"
"  20000   触发器细节        有关触发器的大量输出\n"
"  40000   触发器极度细节    有关触发器的极大量的输出\n"
"   1000   十分详细          大量的琐碎细节，如 dpkg/info 目录\n"
"   2000   极度详细          数量极大的输出\n"
"\n"
"可以用位与(bitwise-or)把除错选项组合起来使用。\n"
"注意，意义和数值将有可能更动。\n"

#: src/main.c:255
msgid "--debug requires an octal argument"
msgstr "--debug 需要一个八进制的参数"

#: src/main.c:278
#, c-format
msgid "null package name in --ignore-depends comma-separated list `%.250s'"
msgstr "在 --ignore-depends 的用逗号相隔的参数列表“%s”中，发现有的软件包名为空"

#: src/main.c:284
#, c-format
msgid "--ignore-depends requires a legal package name. `%.250s' is not; %s"
msgstr "--ignore-depends 需要一个有效的软件包名。而“%.250s”却不是；%s"

#: src/main.c:301 src/main.c:313 src/main.c:584 dpkg-split/main.c:123
#, c-format
msgid "invalid integer for --%s: `%.250s'"
msgstr "--%s 有一个无效的数字参数：“%.250s”"

#: src/main.c:315
msgid "<package status and progress file descriptor>"
msgstr "<包状态和进度文件描述符>"

#: src/main.c:386
#, c-format
msgid ""
"%s forcing options - control behaviour when problems found:\n"
"  warn but continue:  --force-<thing>,<thing>,...\n"
"  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...\n"
" Forcing things:\n"
"  all [!]                Set all force options\n"
"  downgrade [*]          Replace a package with a lower version\n"
"  configure-any          Configure any package which may help this one\n"
"  hold                   Process incidental packages even when on hold\n"
"  bad-path               PATH is missing important programs, problems "
"likely\n"
"  not-root               Try to (de)install things even when not root\n"
"  overwrite              Overwrite a file from one package with another\n"
"  overwrite-diverted     Overwrite a diverted file with an undiverted "
"version\n"
"  bad-verify             Install a package even if it fails authenticity "
"check\n"
"  depends-version [!]    Turn dependency version problems into warnings\n"
"  depends [!]            Turn all dependency problems into warnings\n"
"  confnew [!]            Always use the new config files, don't prompt\n"
"  confold [!]            Always use the old config files, don't prompt\n"
"  confdef [!]            Use the default option for new config files if one\n"
"                         is available, don't prompt. If no default can be "
"found,\n"
"                         you will be prompted unless one of the confold or\n"
"                         confnew options is also given\n"
"  confmiss [!]           Always install missing config files\n"
"  breaks [!]             Install even if it would break another package\n"
"  conflicts [!]          Allow installation of conflicting packages\n"
"  architecture [!]       Process even packages with wrong architecture\n"
"  overwrite-dir [!]      Overwrite one package's directory with another's "
"file\n"
"  remove-reinstreq [!]   Remove packages which require installation\n"
"  remove-essential [!]   Remove an essential package\n"
"\n"
"WARNING - use of options marked [!] can seriously damage your installation.\n"
"Forcing options marked [*] are enabled by default.\n"
msgstr ""
"%s 强制选项 - 可指定遇到问题时的处理手段：\n"
"  警告的同时继续执行：  --force-<手段>，<手段>，...\n"
"  有错误时立即中止：    --refuse-<手段>，<手段>，... | --no-force-<手段"
">>，...\n"
" 强制执行的各种手段：\n"
"  all [!]                应用所有的强制手段\n"
"  downgrade [*]          把软件包替换成更低版本的软件包\n"
"  configure-any          配置任何软件包，只要这可能有助于现在的操作\n"
"  hold                   同时也对被标记为“保持原状”(hold)的软件包进行操作\n"
"  bad-path               PATH 环境变量中找不到关键的程序，有可能引起错误\n"
"  not-root               即使用户不是 root，也试图安装(或卸载)程序\n"
"  overwrite              使用来自某个软件包的文件覆盖原本属于另一软件包的文"
"件\n"
"  overwrite-diverted     使用一个不是转移(diverted)版本的文件覆盖转移"
"(diverted)版本的文件\n"
"  bad-verify             即使软件包没能通过验证，它也将被安装\n"
"  depends-version [!]    把有关版本的依赖问题作为警告处理\n"
"  depends [!]            把所有类型的依赖问题都作为警告处理\n"
"  confnew [!]            总是使用新版的配置文件，不再询问\n"
"  confold [!]            总是使用原有的配置文件，不再询问\n"
"  confdef [!]            如果有默认选择的话，就使用它，\n"
"                         若是没有，同时也没有使用 confold 或 confnew \n"
"                         选项的话，将会询问您，并由您作出选择\n"
"  confmiss [!]           总是安装缺失的配置文件\n"
"  conflicts [!]          让相互冲突的软件包也得以安装\n"
"  architecture [!]       即使软件包所属的体系架构与环境不符，它也将被处理\n"
"  overwrite-dir [!]      用来自一个软件包的文件覆盖原本属于另一软件包的目录\n"
"  remove-reinstreq [!]   删除那些需要安装的软件包\n"
"  remove-essential [!]   删除重要的软件包\n"
"\n"
"警告 - 使用带有[!]标记的选项可能会严重破坏您的系统。\n"
"默认情况下，是使用带有[*]标记的强制手段的。\n"

#: src/main.c:432
#, c-format
msgid "unknown force/refuse option `%.*s'"
msgstr "无法识别的 force/refuse 选项“%.*s”"

#: src/main.c:438
#, c-format
msgid "obsolete force/refuse option '%s'\n"
msgstr "废弃的强制或拒绝选项“%s”\n"

#: src/main.c:578
msgid "--command-fd takes one argument, not zero"
msgstr "--command-fd 需要一个参数，而非零个"

#: src/main.c:580
msgid "--command-fd only takes one argument"
msgstr "--command-fd 只需带一个参数"

#: src/main.c:586
#, c-format
msgid "couldn't open `%i' for stream"
msgstr "无法打开“%i”，并把它作为字符流操作"

#: src/main.c:610
#, c-format
msgid "unexpected eof before end of line %d"
msgstr "在第 %d 行还未结束时，发现未预料的 eof"

#: src/main.c:654 src/main.c:676 src/query.c:675 src/statcmd.c:428
#: dpkg-deb/main.c:222 dpkg-split/main.c:183
msgid "need an action option"
msgstr "需要一个指示操作的选项"

#: src/packages.c:75
#, c-format
msgid "--%s --pending does not take any non-option arguments"
msgstr "--%s --pending 不需要任何不是选项的参数"

#: src/packages.c:113 src/query.c:300 src/query.c:537
#, c-format
msgid "--%s needs at least one package name argument"
msgstr "--%s 需要至少一个软件包名作为参数"

#: src/packages.c:120
msgid ""
"you must specify packages by their own names, not by quoting the names of "
"the files they come in"
msgstr ""
"您必须通过软件包自身的名字来指定软件包，而不是直接引用软件包文件的文件名"

#: src/packages.c:162
#, c-format
msgid "Package %s listed more than once, only processing once.\n"
msgstr "多次列出了软件包 %s，它将只被处理一次。\n"

#: src/packages.c:166
#, c-format
msgid ""
"More than one copy of package %s has been unpacked\n"
" in this run !  Only configuring it once.\n"
msgstr ""
"在这此运行中，软件包 %s 有多个副本被解压缩了！\n"
"现只配置它一次。\n"

#: src/packages.c:211
#, c-format
msgid ""
"package %.250s is not ready for trigger processing\n"
" (current status `%.250s' with no pending triggers)"
msgstr ""
"软件包“%.250s”尚未准备好由触发器处理\n"
" (目前状态为“%.250s”，没有未决的触发)"

#: src/packages.c:307
#, c-format
msgid "  Package %s which provides %s is to be removed.\n"
msgstr "  提供了 %2$s 的软件包 %1$s 即将被删除。\n"

#: src/packages.c:310
#, c-format
msgid "  Package %s is to be removed.\n"
msgstr "  即将删除 %s。\n"

#: src/packages.c:327
#, c-format
msgid "  Version of %s on system is %s.\n"
msgstr "系统中 %s 的版本为 %s。\n"

#: src/packages.c:348
#, c-format
msgid "  Package %s which provides %s awaits trigger processing.\n"
msgstr "  提供了 %2$s 的软件包 %1$s 正在等待触发器处理。\n"

#: src/packages.c:352
#, c-format
msgid "  Package %s awaits trigger processing.\n"
msgstr "  软件包 %s 正在等待触发器处理。\n"

#: src/packages.c:383
#, c-format
msgid "dpkg: also configuring `%s' (required by `%s')\n"
msgstr "dpkg：同时也对“%s”进行配置(“%s”需要如此)\n"

#: src/packages.c:389
#, c-format
msgid "  Package %s which provides %s is not configured yet.\n"
msgstr "  软件包 %s 提供了 %s，但它尚未被配置。\n"

#: src/packages.c:392
#, c-format
msgid "  Package %s is not configured yet.\n"
msgstr "  软件包 %s 尚未配置。\n"

#: src/packages.c:403
#, c-format
msgid "  Package %s which provides %s is not installed.\n"
msgstr "  提供 %2$s 的软件包 %1$s 未安装。\n"

#: src/packages.c:406
#, c-format
msgid "  Package %s is not installed.\n"
msgstr "  未安装软件包“%s”。\n"

#: src/packages.c:443
#, c-format
msgid " %s (%s) breaks %s and is %s.\n"
msgstr "%s (%s)破坏 %s 并且 %s。\n"

#: src/packages.c:451
#, c-format
msgid "  %s (%s) provides %s.\n"
msgstr "%s (%s)提供 %s。\n"

#: src/packages.c:456
#, c-format
msgid "  Version of %s to be configured is %s.\n"
msgstr "将被配置的 %s 的版本为 %s。\n"

#: src/packages.c:555
msgid " depends on "
msgstr " 依赖于 "

#: src/packages.c:561
msgid "; however:\n"
msgstr "；然而：\n"

#: src/pkg-show.c:41 src/query.c:93
msgid "(no description available)"
msgstr "(无可用描述)"

#: src/processarc.c:127
msgid "cannot access archive"
msgstr "无法访问归档文件"

#: src/processarc.c:139
#, c-format
msgid "error ensuring `%.250s' doesn't exist"
msgstr "在确保文件“%.250s”不存在时出错"

#: src/processarc.c:144
msgid "failed to exec dpkg-split to see if it's part of a multiparter"
msgstr ""
"exec dpkg-split 时出错，该操作被用来判断这是否是一个套件(multiparter)中的一个"
"组成部分"

#: src/processarc.c:152
msgid "reassembled package file"
msgstr "重新组装成的软件包文件"

#: src/processarc.c:167
#, c-format
msgid "Authenticating %s ...\n"
msgstr "正在验证 %s ...\n"

#: src/processarc.c:172
msgid "failed to execl debsig-verify"
msgstr "无法 execl debsig-verify"

#: src/processarc.c:179
#, c-format
msgid "Verification on package %s failed!"
msgstr "软件包 %s 没有通过验证！"

#: src/processarc.c:181
#, c-format
msgid ""
"Verification on package %s failed,\n"
"but installing anyway as you requested.\n"
msgstr ""
"虽然软件包 %s 没能通过验证，\n"
"但还是如您所愿继续安装它。\n"

#: src/processarc.c:184
#, c-format
msgid "passed\n"
msgstr "验证通过\n"

#: src/processarc.c:195
#, fuzzy
msgid "unable to create temporary directory"
msgstr "生成临时目录的目录名失败"

#: src/processarc.c:222
msgid "failed to exec dpkg-deb to extract control information"
msgstr "无法 exec dpkg-deb，通过它来解压缩控制信息"

#: src/processarc.c:248
#, c-format
msgid "Recorded info about %s from %s.\n"
msgstr "从 %2$s 获得的关于 %1$s 的信息。\n"

#: src/processarc.c:257
#, c-format
msgid "package architecture (%s) does not match system (%s)"
msgstr "软件包的体系架构(%s)与本机系统的架构(%s)不符"

#: src/processarc.c:312
#, c-format
msgid ""
"dpkg: regarding %s containing %s, pre-dependency problem:\n"
"%s"
msgstr ""
"dpkg：对于含 %2$s 的文件 %1$s 来说，有预依赖(pre-dependency)方面的问题：\n"
"%3$s"

#: src/processarc.c:315
#, c-format
msgid "pre-dependency problem - not installing %.250s"
msgstr "预依赖(pre-dependency)问题 - 将不安装%.250s"

#: src/processarc.c:316
msgid "ignoring pre-dependency problem!"
msgstr "忽略预依赖(pre-dependency)问题！"

#: src/processarc.c:331
#, c-format
msgid "Preparing to replace %s %s (using %s) ...\n"
msgstr "正预备替换 %s %s (使用 %s) ...\n"

#: src/processarc.c:337
#, c-format
msgid "Unpacking %s (from %s) ...\n"
msgstr "正在解压缩 %s (从 %s) ...\n"

#: src/processarc.c:366
#, c-format
msgid "name of conffile (starting `%.250s') is too long (>%d characters)"
msgstr "conffile 的文件名(其开头是“%.250s”)太长(> %d 个字符)"

#: src/processarc.c:419
#, c-format
msgid "read error in %.250s"
msgstr "读取 %.250s 出错"

#: src/processarc.c:421
#, c-format
msgid "error closing %.250s"
msgstr "关闭 %.250s 出错"

#: src/processarc.c:423
#, c-format
msgid "error trying to open %.250s"
msgstr "试图打开 %.250s 出错"

#: src/processarc.c:459
#, c-format
msgid "De-configuring %s, to allow removal of %s ...\n"
msgstr "正在反配置 %s 以允许删除 %s ...\n"

#: src/processarc.c:462
#, c-format
msgid "De-configuring %s ...\n"
msgstr "正在反配置 %s ...\n"

#: src/processarc.c:537
#, c-format
msgid "Unpacking replacement %.250s ...\n"
msgstr "正在解压缩将用于更替的包文件 %.250s ...\n"

#: src/processarc.c:618
msgid "unable to exec dpkg-deb to get filesystem archive"
msgstr "无法 exec dpkg-deb，以此来获得打包后的文件系统"

#: src/processarc.c:632
msgid "error reading dpkg-deb tar output"
msgstr "无法读取 dpkg-deb 输出的 tar 文件"

#: src/processarc.c:634
msgid "corrupted filesystem tarfile - corrupted package archive"
msgstr "文件系统的 tar 文件已损坏 - 软件包文件已毁损"

#: src/processarc.c:637
msgid "dpkg-deb: zap possible trailing zeros"
msgstr "dpkg-deb：截去了最后的零数据(zeros)"

#: src/processarc.c:699
#, c-format
msgid "could not stat old file '%.250s' so not deleting it: %s"
msgstr "无法 stat 旧文件“%.250s”因此不删除它：%s"

#: src/processarc.c:705
#, c-format
msgid "unable to delete old directory '%.250s': %s"
msgstr "无法删除原有的目录“%.250s”：%s"

#: src/processarc.c:708
#, c-format
msgid "old conffile '%.250s' was an empty directory (and has now been deleted)"
msgstr "原有 conffile “%.250s”是一个空目录(现在已被删除)"

#: src/processarc.c:750
#, c-format
msgid "unable to stat other new file `%.250s'"
msgstr "无法 stat 其它新文件“%.250s”"

#: src/processarc.c:761
#, c-format
msgid ""
"old file '%.250s' is the same as several new files! (both '%.250s' and "
"'%.250s')"
msgstr "旧文件“%.250s”与多个新文件相同！(“%.250s”和“%.250s”)"

#: src/processarc.c:800
#, c-format
msgid "unable to securely remove old file '%.250s': %s"
msgstr "无法安全地删除旧的文件“%.250s”：%s"

#: src/processarc.c:834 src/processarc.c:1085 src/query.c:486 src/remove.c:272
msgid "cannot read info directory"
msgstr "无法读取信息(info)目录"

#: src/processarc.c:847
#, c-format
msgid "old version of package has overly-long info file name starting `%.250s'"
msgstr "原先版本的软件包中有一个信息文件的文件名太长，文件名是以“%.250s”开头的"

#: src/processarc.c:859
#, c-format
msgid "unable to remove obsolete info file `%.250s'"
msgstr "无法删除废弃不用的信息文件“%.250s”"

#: src/processarc.c:862
#, c-format
msgid "unable to install (supposed) new info file `%.250s'"
msgstr "无法安装文件“%.250s”，该文件被认定是新的信息文件"

#: src/processarc.c:869
msgid "unable to open temp control directory"
msgstr "无法打开临时主控目录"

#: src/processarc.c:878
#, c-format
msgid "package contains overly-long control info file name (starting `%.50s')"
msgstr "软件包中有一个主控信息文件的文件名太长(该文件名是以“%.250s”开头的)"

#: src/processarc.c:883
#, c-format
msgid "package control info contained directory `%.250s'"
msgstr "软件包的主控信息含有一个目录“%.250s”"

#: src/processarc.c:885
#, c-format
msgid "package control info rmdir of `%.250s' didn't say not a dir"
msgstr "软件包控制信息，rmdir “%.250s”也没有说这不是一个目录"

#: src/processarc.c:891
#, c-format
msgid "package %s contained list as info file"
msgstr "软件包 %s 把一个列表作为信息文件使用"

#: src/processarc.c:897
#, c-format
msgid "unable to install new info file `%.250s' as `%.250s'"
msgstr "无法把新的信息文件“%.250s”安装到“%.250s”"

#: src/processarc.c:1064
#, c-format
msgid "(Noting disappearance of %s, which has been completely replaced.)\n"
msgstr "(注意到 %s 已经不复存在，它已然被完全取代了。)\n"

#: src/processarc.c:1101
#, c-format
msgid "unable to delete disappearing control info file `%.250s'"
msgstr "无法删除已经消失了的控制信息文件“%.250s”"

#: src/query.c:115
#, fuzzy
msgid ""
"Desired=Unknown/Install/Remove/Purge/Hold\n"
"| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-"
"pend\n"
"|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)\n"
msgstr ""
"期望状态=未知(u)/安装(i)/删除(r)/清除(p)/保持(h)\n"
"| 当前状态=未(n)/已安装(i)/仅存配置(c)/仅解压缩(U)/配置失败(F)/不完全安装(H)/"
"触发器等待(W)/触发器未决(T)\n"
"|/ 错误?=(无)/保持(H)/须重装(R)/两者兼有(X) (状态，错误：大写=故障)\n"

#: src/query.c:119
msgid "Name"
msgstr "名称"

#: src/query.c:119
msgid "Version"
msgstr "版本"

#: src/query.c:119
msgid "Description"
msgstr "简介"

#: src/query.c:180 src/query.c:435 src/select.c:73
#, c-format
msgid "No packages found matching %s.\n"
msgstr "没有找到与 %s 相匹配的软件包。\n"

#: src/query.c:204
#, c-format
msgid "diversion by %s from: %s\n"
msgstr "%s 导致转移自：%s\n"

#: src/query.c:206
#, c-format
msgid "diversion by %s to: %s\n"
msgstr "%s 导致转移至：%s\n"

#: src/query.c:209
#, c-format
msgid "local diversion from: %s\n"
msgstr "本地转移自：%s\n"

#: src/query.c:210
#, c-format
msgid "local diversion to: %s\n"
msgstr "本地转移至：%s\n"

#: src/query.c:238
msgid "--search needs at least one file name pattern argument"
msgstr "--search 需要至少一个文件名表达式作为参数"

#: src/query.c:279
#, c-format
msgid "dpkg: %s not found.\n"
msgstr "dpkg：没有找到 %s。\n"

#: src/query.c:319
#, c-format
msgid "Package `%s' is not installed and no info is available.\n"
msgstr "系统没有安装软件包“%s”，因而没有相关的信息。\n"

#: src/query.c:328
#, c-format
msgid "Package `%s' is not available.\n"
msgstr "软件包“%s”现在不可用。\n"

#: src/query.c:338 src/query.c:557
#, c-format
msgid "Package `%s' is not installed.\n"
msgstr "未曾安装软件包“%s”。\n"

#: src/query.c:347
#, c-format
msgid "Package `%s' does not contain any files (!)\n"
msgstr "软件包“%s”未含有任何文件(!)\n"

#: src/query.c:354
#, c-format
msgid "locally diverted to: %s\n"
msgstr "本地转移(locally diverted)到：%s\n"

#: src/query.c:357
#, c-format
msgid "package diverts others to: %s\n"
msgstr "软件包转移其他到：%s\n"

#: src/query.c:360
#, c-format
msgid "diverted by %s to: %s\n"
msgstr "被 %s 转移到了：%s\n"

#: src/query.c:382
msgid ""
"Use dpkg --info (= dpkg-deb --info) to examine archive files,\n"
"and dpkg --contents (= dpkg-deb --contents) to list their contents.\n"
msgstr ""
"使用 dpkg --info (= dpkg-deb --info) 来检测打包好的文件，\n"
"还可以通过 dpkg --contents (= dpkg-deb --contents) 来列出它们的内容。\n"

#: src/query.c:542
#, fuzzy, c-format
msgid "--%s takes at most two arguments"
msgstr "--build 至多可有两个参数"

#: src/query.c:550
#, c-format
msgid "control file contains %c"
msgstr "主控文件包含 %c"

#: src/query.c:570
#, fuzzy, c-format
msgid "Debian %s package management program query tool version %s.\n"
msgstr "Debian %s 软件包管理程序 %s 版。\n"

#: src/query.c:589
#, c-format
msgid ""
"Commands:\n"
"  -s|--status <package> ...        Display package status details.\n"
"  -p|--print-avail <package> ...   Display available version details.\n"
"  -L|--listfiles <package> ...     List files `owned' by package(s).\n"
"  -l|--list [<pattern> ...]        List packages concisely.\n"
"  -W|--show <pattern> ...          Show information on package(s).\n"
"  -S|--search <pattern> ...        Find package(s) owning file(s).\n"
"  -c|--control-path <package> [<file>]\n"
"                                   Print path for package control file.\n"
"\n"
msgstr ""
"命令：\n"
"  -s|--status <软件包名> ...       显示软件包详尽的状态信息。\n"
"  -p|--print-avail <软件包名> ...  显示当前可供安装的版本的详细信息。\n"
"  -L|--listfiles <软件包名> ...    列出所有“属于”该软件包(或多个软件包)的文"
"件。\n"
"  -l|--list [<表达式> ...]         简要地列出软件包。\n"
"  -W|--show <表达式> ...           显示软件包的相关信息。\n"
"  -S|--search <表达式> ...         搜寻拥有该文件(或多个文件)的软件包。\n"
"\n"

#: src/query.c:606
#, c-format
msgid ""
"Options:\n"
"  --admindir=<directory>           Use <directory> instead of %s.\n"
"  -f|--showformat=<format>         Use alternative format for --show.\n"
"\n"
msgstr ""
"选项：\n"
"  --admindir=<目录>                使用 <目录> 而非 %s。\n"
"  -f|--showformat=<格式串>         令 --show 使用其它的格式输出。\n"
"\n"

#: src/query.c:612 dpkg-deb/main.c:110
#, c-format
msgid ""
"Format syntax:\n"
"  A format is a string that will be output for each package. The format\n"
"  can include the standard escape sequences \\n (newline), \\r (carriage\n"
"  return) or \\\\ (plain backslash). Package information can be included\n"
"  by inserting variable references to package fields using the ${var[;"
"width]}\n"
"  syntax. Fields will be right-aligned unless the width is negative in "
"which\n"
"  case left alignment will be used.\n"
msgstr ""
"格式串的语法：\n"
"  格式串是用于显示每一个软件包的字符串。格式串可以包含标准的\n"
"  脱字符(escape sequences)，如 \\n (换行)、\\r (回车)、或是 \\\\ (反斜杠)。\n"
"  还可以通过加入软件包属性的变量引用来反映软件包的相关信息，\n"
"  要在某些字段引用属性变量的话，可以用这样的语法：${var[;width]}。\n"
"  字段一般是靠右对齐的，除非它的宽度是负数。若其宽度是负数，\n"
"  那么字段将会靠左对齐。\n"

#: src/query.c:626 src/statcmd.c:51
msgid "Use --help for help about querying packages."
msgstr ""

#: src/remove.c:83
#, c-format
msgid "ignoring request to remove %.250s which isn't installed."
msgstr "忽略删除 %.250s 的要求，系统没有安装该软件包。"

#: src/remove.c:90
#, c-format
msgid ""
"ignoring request to remove %.250s, only the config\n"
" files of which are on the system. Use --purge to remove them too."
msgstr ""
"忽略卸载 %.250s 的要求，系统中仅存在其配置文件。\n"
"可使用 --purge 来把这些配置文件一并删除。"

#: src/remove.c:99
msgid "This is an essential package - it should not be removed."
msgstr "这是一个重要的软件包 - 您不应当把它卸载。"

#: src/remove.c:124
#, c-format
msgid ""
"dpkg: dependency problems prevent removal of %s:\n"
"%s"
msgstr ""
"dpkg：依赖问题阻止卸载 %s 的操作继续：\n"
"%s"

#: src/remove.c:126
msgid "dependency problems - not removing"
msgstr "依赖问题 - 不会执行卸载"

#: src/remove.c:130
#, c-format
msgid ""
"dpkg: %s: dependency problems, but removing anyway as you requested:\n"
"%s"
msgstr ""
"dpkg：%s：有依赖问题，但是如您所愿还是继续卸载：\n"
"%s"

#: src/remove.c:138
msgid ""
"Package is in a very bad inconsistent state - you should\n"
" reinstall it before attempting a removal."
msgstr ""
"该软件包现在的状态极为不妥 - 建议您\n"
"在卸载它之前再重新安装一次。"

#: src/remove.c:145
#, c-format
msgid "Would remove or purge %s ...\n"
msgstr "此操作会卸载或清除 %s ...\n"

#: src/remove.c:153
#, c-format
msgid "Removing %s ...\n"
msgstr "正在卸载 %s ...\n"

#: src/remove.c:254 src/remove.c:361
#, c-format
msgid ""
"while removing %.250s, unable to remove directory '%.250s': %s - directory "
"may be a mount point?"
msgstr "当卸载 %.250s 时，无法删掉目录“%.250s”：%s - 它会不会是一个挂载点呢？"

#: src/remove.c:260 src/remove.c:367
#, c-format
msgid "cannot remove `%.250s'"
msgstr "无法卸载“%.250s”"

#: src/remove.c:263
#, c-format
msgid "unable to securely remove '%.250s'"
msgstr "无法安全地卸载 %.250s"

#: src/remove.c:295
#, c-format
msgid "unable to delete control info file `%.250s'"
msgstr "无法删除控制信息文件“%.250s”"

#: src/remove.c:356
#, c-format
msgid "while removing %.250s, directory '%.250s' not empty so not removed."
msgstr "卸载“%.250s”时，目录“%.250s”非空，因而不会删除该目录。"

#: src/remove.c:390
#, c-format
msgid "Purging configuration files for %s ...\n"
msgstr "正在清除 %s 的配置文件 ...\n"

#: src/remove.c:440
#, c-format
msgid "cannot remove old config file `%.250s' (= `%.250s')"
msgstr "无法删除原有的配置文件“%.250s” (=“%.250s”)"

#: src/remove.c:455
#, c-format
msgid "cannot read config file dir `%.250s' (from `%.250s')"
msgstr "无法读取配置文件所在目录“%.250s”(从“%.250s”)"

#: src/remove.c:490
#, c-format
msgid "cannot remove old backup config file `%.250s' (of `%.250s')"
msgstr "无法删除旧有的配置文件备份“%.250s”(在“%.250s”中提到)"

#: src/remove.c:526
#, c-format
msgid "unable to check existence of `%.250s'"
msgstr "无法判断“%.250s”是否存在"

#: src/remove.c:561
msgid "cannot remove old files list"
msgstr "无法删除原有的文件列表"

#: src/remove.c:567
msgid "can't remove old postrm script"
msgstr "无法删除原有的 postrm 脚本"

#: src/select.c:109
#, c-format
msgid "unexpected eof in package name at line %d"
msgstr "在第 %d 行的软件包名中发现了 eof，这出乎我们的意料"

#: src/select.c:110
#, c-format
msgid "unexpected end of line in package name at line %d"
msgstr "在第 %d 行的软件包名中发现该行在此结束，这出乎我们的意料"

#: src/select.c:114
#, c-format
msgid "unexpected eof after package name at line %d"
msgstr "在第 %d 行的软件包名后发现 eof，这出乎我们的意料"

#: src/select.c:115
#, c-format
msgid "unexpected end of line after package name at line %d"
msgstr "在第 %d 行的软件包名后发现该行在此结束，这出乎我们的意料"

#: src/select.c:124
#, c-format
msgid "unexpected data after package and selection at line %d"
msgstr "在第 %d 行的软件包和用户选择后有发现了数据，这出乎我们的意料"

#: src/select.c:129
#, c-format
msgid "illegal package name at line %d: %.250s"
msgstr "在第 %d 行发现非法的软件包名：%.250s"

#: src/select.c:131
#, c-format
msgid "unknown wanted status at line %d: %.250s"
msgstr "在第 %d 行发现无法识别的状态：%.250s"

#: src/select.c:137
msgid "read error on standard input"
msgstr "从标准输入读取数据时出错"

#: src/statcmd.c:56 scripts/dpkg-divert.pl:32
#, c-format, perl-format
msgid "Debian %s version %s.\n"
msgstr "Debian %s 版本 %s。\n"

#: src/statcmd.c:59
#, c-format
msgid ""
"Copyright (C) 2000, 2001 Wichert Akkerman.\n"
"Copyright (C) 2006-2009 Guillem Jover.\n"
msgstr ""
"版权所有 (C) 2000, 2001 Wichert Akkerman\n"
"版权所有 (C) 2006-2009 Guillem Jover\n"

#: src/statcmd.c:79
#, c-format
msgid ""
"Commands:\n"
"  --add <owner> <group> <mode> <file>\n"
"                           add a new entry into the database.\n"
"  --remove <file>          remove file from the database.\n"
"  --list [<glob-pattern>]  list current overrides in the database.\n"
"\n"
msgstr ""
"命令：\n"
"  --add <所有者> <用户组> <权限位> <文件名>\n"
"                           在数据库中加入一个新的记录条目。\n"
"  --remove <文件名>        将文件从数据库中删除。\n"
"  --list [<glob 模式>]     列出当前数据库中的 override 条目。\n"
"\n"

#: src/statcmd.c:87
#, c-format
msgid ""
"Options:\n"
"  --admindir <directory>   set the directory with the statoverride file.\n"
"  --update                 immediately update file permissions.\n"
"  --force                  force an action even if a sanity check fails.\n"
"  --quiet                  quiet operation, minimal output.\n"
"  --help                   show this help message.\n"
"  --version                show the version.\n"
"\n"
msgstr ""
"选项：\n"
"  --admindir <目录>        设置 statoverride 文件的目录。\n"
"  --update                 立即更新文件的权限。\n"
"  --force                  就算没有通过自检，也强制执行操作。\n"
"  --quiet                  安静模式，输出尽可能少的信息。不显示输出信息。\n"
"  --help                   显示本帮助信息。\n"
"  --version                显示版本信息。\n"

#: src/statcmd.c:125
msgid "stripping trailing /"
msgstr "移除后面的 /"

#: src/statcmd.c:226
msgid "cannot open new statoverride file"
msgstr "无法打开新的 statoverride 文件：%s"

#: src/statcmd.c:234 dpkg-deb/build.c:556 dpkg-split/join.c:73
#: dpkg-split/queue.c:171
#, fuzzy, c-format
msgid "unable to flush file '%s'"
msgstr "vsnprintf 无法 flush"

#: src/statcmd.c:236 dpkg-deb/build.c:558 dpkg-split/join.c:75
#: dpkg-split/queue.c:173
#, fuzzy, c-format
msgid "unable to sync file '%s'"
msgstr "无法打开原始文件“%.250s”"

#: src/statcmd.c:241
msgid "error removing statoverride-old"
msgstr "移除 statoverride-old 时出错：%s"

#: src/statcmd.c:243
msgid "error creating new statoverride-old"
msgstr "建立新的 statoverride-old 时出错：%s"

#: src/statcmd.c:245
msgid "error installing new statoverride"
msgstr "安装新的 statoverride 时出错：%s"

#: src/statcmd.c:265
msgid "--add needs four arguments"
msgstr "--add 需要四个参数"

#: src/statcmd.c:268 scripts/dpkg-divert.pl:163
msgid "file may not contain newlines"
msgstr "文件不可以含有换行符"

#: src/statcmd.c:275
#, c-format
msgid ""
"An override for '%s' already exists, but --force specified so will be "
"ignored."
msgstr "--force 已指定，所以先前对“%s”的覆盖设置会被忽略。"

#: src/statcmd.c:279
#, c-format
msgid "An override for '%s' already exists, aborting."
msgstr "“%s” 的 override 已存在，"

#: src/statcmd.c:291
#, c-format
msgid "--update given but %s does not exist"
msgstr "警告：--update 已指定但 %s 不存在"

#: src/statcmd.c:309 scripts/dpkg-divert.pl:160 scripts/dpkg-divert.pl:189
#: scripts/dpkg-divert.pl:232 scripts/dpkg-divert.pl:242
#, c-format, perl-format
msgid "--%s needs a single argument"
msgstr "--%s 需要一个参数"

#: src/statcmd.c:315
msgid "No override present."
msgstr "override 不存在。"

#: src/statcmd.c:323
msgid "--update is useless for --remove"
msgstr "警告：对于 --remove，--update 是无效的"

#: src/statdb.c:57
msgid "syntax error: invalid uid in statoverride file"
msgstr "语法错误： statoverride 文件有无效的 uid"

#: src/statdb.c:62
#, c-format
msgid "syntax error: unknown user '%s' in statoverride file"
msgstr "语法错误：在 statoverride 文件中有未知用户“%s”"

#: src/statdb.c:81
msgid "syntax error: invalid gid in statoverride file"
msgstr "语法错误：statoverride 文件有无效的 gid"

#: src/statdb.c:86
#, c-format
msgid "syntax error: unknown group '%s' in statoverride file"
msgstr "语法错误：statoverride 文件有无效组“%s”"

#: src/statdb.c:102
msgid "syntax error: invalid mode in statoverride file"
msgstr "语法错误：statoverride 文件有无效权限模式"

#: src/statdb.c:128
msgid "failed to open statoverride file"
msgstr "无法打开 statoverride 文件"

#: src/statdb.c:135
msgid "failed to fstat statoverride file"
msgstr "无法 fstat statoverride 文件"

#: src/statdb.c:138
msgid "failed to fstat previous statoverride file"
msgstr "无法 fstat 原有的 statoverride 文件"

#: src/statdb.c:163
#, c-format
msgid "statoverride file `%.250s'"
msgstr "statoverride 文件 “%.250s”"

#: src/statdb.c:170
msgid "statoverride file is missing final newline"
msgstr "statoverride 文件缺少最后结尾的换行符"

#: src/statdb.c:174
msgid "statoverride file contains empty line"
msgstr "statoverride 文件含有空行"

#: src/statdb.c:179 src/statdb.c:191 src/statdb.c:203
msgid "syntax error in statoverride file"
msgstr "statoverride 文件有语法错误"

#: src/statdb.c:187 src/statdb.c:199 src/statdb.c:211
msgid "unexpected end of line in statoverride file"
msgstr "statoverride 文件有非预期的行结束符"

#: src/statdb.c:215
#, c-format
msgid "multiple statusoverides present for file '%.250s'"
msgstr "存在多个 statoverride 用于文件 “%.250s”"

#: src/trigcmd.c:48
msgid "Type dpkg-trigger --help for help about this utility."
msgstr "输入 dpkg-trigger --help 以获取此功能的帮助信息。"

#: src/trigcmd.c:53
#, fuzzy, c-format
msgid "Debian %s package trigger utility version %s.\n"
msgstr "”Debian %s 软件包触发器功能。\n"

#: src/trigcmd.c:69
#, c-format
msgid ""
"Usage: %s [<options> ...] <trigger-name>\n"
"       %s [<options> ...] <command>\n"
"\n"
msgstr ""
"用法：%s [<选项> ...] <触发器名称>\n"
"      %s [<选项> ...] <命令>\n"
"\n"

#: src/trigcmd.c:74
#, c-format
msgid ""
"Commands:\n"
"  --check-supported                Check if the running dpkg supports "
"triggers.\n"
"\n"
msgstr ""
"命令：\n"
"  --check-supported                检查正在运行的 dpkg 是否支持触发器。\n"
"\n"

#: src/trigcmd.c:84
#, c-format
msgid ""
"Options:\n"
"  --admindir=<directory>           Use <directory> instead of %s.\n"
"  --by-package=<package>           Override trigger awaiter (normally set\n"
"                                     by dpkg).\n"
"  --no-await                       No package needs to await the "
"processing.\n"
"  --no-act                         Just test - don't actually change "
"anything.\n"
"\n"
msgstr ""
"选项：\n"
"  --admindir=<目录>                使用 <目录> 而不是 %s。\n"
"  --by-package=<软件包>            重写触发器等待者(通常由 dpkg 设置)。\n"
"  --no-await                       没有软件包需要等待处理。\n"
"  --no-act                         仅测试 - 不真正进行修改。\n"
"\n"

#: src/trigcmd.c:154
#, c-format
msgid "%s: triggers data directory not yet created\n"
msgstr "%s：尚未创建触发器数据目录\n"

#: src/trigcmd.c:158
#, c-format
msgid "%s: trigger records not yet in existence\n"
msgstr "%s：触发器记录尚不存在\n"

#: src/trigcmd.c:205
msgid "takes one argument, the trigger name"
msgstr "只接受一个参数，触发器名"

#: src/trigcmd.c:210
msgid ""
"dpkg-trigger must be called from a maintainer script (or with a --by-package "
"option)"
msgstr "dpkg-trigger 必须从维护者脚本中调用(或者通过 --by-package 选项)"

#: src/trigcmd.c:215
#, c-format
msgid "dpkg-trigger: illegal awaited package name `%.250s': %.250s"
msgstr "dpkg-trigger：非法的等待软件包名“%.250s”:%.250s"

#: src/trigcmd.c:220
#, c-format
msgid "invalid trigger name `%.250s': %.250s"
msgstr "无效的触发器名“%.250s”:%.250s"

#: src/trigproc.c:235
#, c-format
msgid ""
"%s: cycle found while processing triggers:\n"
" chain of packages whose triggers are or may be responsible:\n"
msgstr ""
"%s：处理触发器时发现回路：\n"
" 包含或可能包含对此有责任的触发器的软件包链：\n"

#: src/trigproc.c:243
#, c-format
msgid ""
"\n"
" packages' pending triggers which are or may be unresolvable:\n"
msgstr ""
"\n"
" 无法解决的软件包未决触发器：\n"

#: src/trigproc.c:266
msgid "triggers looping, abandoned"
msgstr "触发器循环，放弃"

#: src/trigproc.c:293
#, c-format
msgid "Processing triggers for %s ...\n"
msgstr "正在处理用于 %s 的触发器...\n"

#: src/update.c:48
#, c-format
msgid "--%s needs exactly one Packages file argument"
msgstr "--%s 只需要一个软件包名作为参数"

#: src/update.c:57
msgid "unable to access dpkg status area for bulk available update"
msgstr "无法访问 dpkg 的状态区，以进行批量的可用软件包更新"

#: src/update.c:59
msgid "bulk available update requires write access to dpkg status area"
msgstr "进行批量可用软件包的更新，需要拥有对 dpkg 状态区的写权限"

#: src/update.c:66
#, c-format
msgid "Replacing available packages info, using %s.\n"
msgstr "正在使用 %s 替换可用软件包的信息。\n"

#: src/update.c:69
#, c-format
msgid "Updating available packages info, using %s.\n"
msgstr "正在使用 %s 更新可用软件包的信息。\n"

#: src/update.c:95
#, c-format
msgid "Information about %d package(s) was updated.\n"
msgstr "共更新了 %d 个软件包的相关信息。\n"

#: src/update.c:102
#, c-format
msgid ""
"obsolete '--%s' option, unavailable packages are automatically cleaned up."
msgstr "已废弃的“--%s”选项，现在不可用软件包将自动被清理。"

#: dpkg-deb/build.c:96
#, c-format
msgid "dpkg-deb - error: %s (`%s') doesn't contain any digits\n"
msgstr "dpkg-deb - 错误：%s (“%s”) 未含有任何数字\n"

#: dpkg-deb/build.c:167
#, c-format
msgid "file name '%.50s...' is too long"
msgstr "文件名“%.50s...”太长了"

#: dpkg-deb/build.c:236 scripts/dpkg-divert.pl:138
#: scripts/update-alternatives.pl:128 scripts/update-alternatives.pl:132
#, c-format, perl-format
msgid "--%s needs a <directory> argument"
msgstr "--%s 需要一个 <directory> 参数"

#: dpkg-deb/build.c:240
msgid "--build takes at most two arguments"
msgstr "--build 至多可有两个参数"

#: dpkg-deb/build.c:244
#, c-format
msgid "unable to check for existence of archive `%.250s'"
msgstr "无法判断包文件“%.250s”存在与否"

#: dpkg-deb/build.c:261
msgid "target is directory - cannot skip control file check"
msgstr "目标是一个目录 - 无法忽略主控文件的检查步骤"

#: dpkg-deb/build.c:262
msgid "not checking contents of control area."
msgstr "不检查控制区域的内容。"

#: dpkg-deb/build.c:263
#, c-format
msgid "dpkg-deb: building an unknown package in '%s'.\n"
msgstr "dpkg-deb：正在“%s”中构建未知软件包。\n"

#: dpkg-deb/build.c:280
msgid "package name has characters that aren't lowercase alphanums or `-+.'"
msgstr "软件包的名字含有不是小写字母或“-+”的字符"

#: dpkg-deb/build.c:282
#, c-format
msgid "'%s' contains user-defined Priority value '%s'"
msgstr "“%s”含有用户自定义的优先级别(Priority value) “%s”"

#: dpkg-deb/build.c:290
#, c-format
msgid "'%s' contains user-defined field '%s'"
msgstr "“%s”含有用户自定义的字段“%s”"

#: dpkg-deb/build.c:295
msgid "(upstream) version"
msgstr "(上游)版本"

#: dpkg-deb/build.c:297
msgid "Debian revision"
msgstr "Debian 版本"

#: dpkg-deb/build.c:298
#, c-format
msgid "%d errors in control file"
msgstr "主控文件中共有 %d 个错误"

#: dpkg-deb/build.c:309
#, c-format
msgid "dpkg-deb: building package `%s' in `%s'.\n"
msgstr "dpkg-deb：正在新建软件包“%s”，包文件为“%s”。\n"

#: dpkg-deb/build.c:315
msgid "unable to stat control directory"
msgstr "无法 stat 控制目录"

#: dpkg-deb/build.c:317
msgid "control directory is not a directory"
msgstr "控制目录不是目录"

#: dpkg-deb/build.c:319
#, c-format
msgid "control directory has bad permissions %03lo (must be >=0755 and <=0775)"
msgstr "控制目录的的权限位是 %03lo (必须 >=0755 且 <=0755)"

#: dpkg-deb/build.c:330
#, c-format
msgid "maintainer script `%.50s' is not a plain file or symlink"
msgstr "维护者的脚本“%.50s”不是普通文件或符号链接"

#: dpkg-deb/build.c:332
#, c-format
msgid ""
"maintainer script `%.50s' has bad permissions %03lo (must be >=0555 and "
"<=0775)"
msgstr "维护者的脚本“%.50s”的权限位是 %03lo (必须 >=0555 且 <=0775)"

#: dpkg-deb/build.c:336
#, c-format
msgid "maintainer script `%.50s' is not stattable"
msgstr "无法获取维护者的脚本文件“%.50s”的状态"

#: dpkg-deb/build.c:349
msgid "empty string from fgets reading conffiles"
msgstr "通过 fgets 读取 conffile 时，返回了空字符串"

#: dpkg-deb/build.c:351
#, c-format
msgid "conffile name '%.50s...' is too long, or missing final newline"
msgstr "conffile 的文件名“%.50s...”超长，或是缺少最后结尾的换行符"

#: dpkg-deb/build.c:364
#, c-format
msgid "conffile filename '%s' contains trailing white spaces"
msgstr "conffile “%s” 的文件名后面含有空格"

#: dpkg-deb/build.c:366
#, c-format
msgid "conffile `%.250s' does not appear in package"
msgstr "软件包内没有发现 conffile “%.250s”"

#: dpkg-deb/build.c:368
#, c-format
msgid "conffile `%.250s' is not stattable"
msgstr "无法 conffile “%.50s”的状态"

#: dpkg-deb/build.c:370
#, c-format
msgid "conffile '%s' is not a plain file"
msgstr "conffile “%s”不是普通文件"

#: dpkg-deb/build.c:375
#, c-format
msgid "conffile name '%s' is duplicated"
msgstr "conffile 名称 %s 重复"

#: dpkg-deb/build.c:386
msgid "error reading conffiles file"
msgstr "读取 conffile 文件时出错"

#: dpkg-deb/build.c:389
msgid "error opening conffiles file"
msgstr "打开 conffile 文件时出错"

#: dpkg-deb/build.c:392
#, c-format
msgid "ignoring %d warnings about the control file(s)\n"
msgstr "忽略有关主控文件的 %d 个警告\n"

#: dpkg-deb/build.c:401
#, c-format
msgid "unable to unbuffer `%.255s'"
msgstr "无法关闭文件缓冲“%.255s”"

#: dpkg-deb/build.c:409
msgid "failed to chdir to .../DEBIAN"
msgstr "chdir 到 .../DEBIAN 失败"

#: dpkg-deb/build.c:411 dpkg-deb/build.c:483
msgid "failed to exec tar -cf"
msgstr "执行 tar -cf 失败"

#: dpkg-deb/build.c:418
msgid "failed to make tmpfile (control)"
msgstr "新建临时文件(控制信息)失败"

#: dpkg-deb/build.c:420
#, c-format
msgid "failed to unlink tmpfile (control), %s"
msgstr "unlink 临时文件(控制信息)失败，%s"

#: dpkg-deb/build.c:428 dpkg-deb/build.c:459
msgid "control"
msgstr "控制信息"

#: dpkg-deb/build.c:433
msgid "failed to fstat tmpfile (control)"
msgstr "fstat 临时文件(控制信息)失败"

#: dpkg-deb/build.c:458
msgid "failed to rewind tmpfile (control)"
msgstr "跳到临时文件(控制信息)的起始位置(rewind)失败"

#: dpkg-deb/build.c:467
msgid "failed to make tmpfile (data)"
msgstr "新建临时文件(数据)失败"

#: dpkg-deb/build.c:469
#, c-format
msgid "failed to unlink tmpfile (data), %s"
msgstr "unlink 临时文件(数据)失败，%s"

#: dpkg-deb/build.c:493 dpkg-deb/extract.c:291
msgid "data"
msgstr "数据"

#: dpkg-deb/build.c:507
msgid "failed to exec find"
msgstr "执行 find 失败"

#: dpkg-deb/build.c:518 dpkg-deb/build.c:525
msgid "failed to write filename to tar pipe (data)"
msgstr "写入文件名到 tar 的管道(数据)失败"

#: dpkg-deb/build.c:529
msgid "<compress> from tar -cf"
msgstr "<压缩> 自 tar -cf"

#: dpkg-deb/build.c:538
msgid "failed to fstat tmpfile (data)"
msgstr "fstat 临时文件(数据)失败"

#: dpkg-deb/build.c:548
msgid "failed to rewind tmpfile (data)"
msgstr "跳到临时文件(数据)的起始位置(rewind)失败"

#: dpkg-deb/build.c:549
msgid "cat (data)"
msgstr "cat (数据)"

#: dpkg-deb/extract.c:57
msgid "failed to exec sh -c mv foo/* &c"
msgstr "执行 sh -c mv foo/* &c 失败"

#: dpkg-deb/extract.c:66
#, c-format
msgid "error reading %s from file %.255s"
msgstr "无法从文件 %2$s 读取 %1$s"

#: dpkg-deb/extract.c:68
#, c-format
msgid "unexpected end of file in %s in %.255s"
msgstr "在 %2$.255s 中读取 %1$s 时遇到意料之外的文件结束符"

#: dpkg-deb/extract.c:81 dpkg-split/info.c:58
#, c-format
msgid "file `%.250s' is corrupt - %.250s length contains nulls"
msgstr "文件“%.250s”已损毁 - %.250s 的长度含有 null 位"

#: dpkg-deb/extract.c:88
#, c-format
msgid "file `%.250s' is corrupt - negative member length %zi"
msgstr "文件“%.250s”已损毁 - 成员长度为负 %zi"

#: dpkg-deb/extract.c:90 dpkg-split/info.c:49
#, c-format
msgid "file `%.250s' is corrupt - bad digit (code %d) in %s"
msgstr "文件“%1$.250s”已损毁 - 在 %3$s 中有无效数字(即 %2$d)"

#: dpkg-deb/extract.c:103
msgid "failed getting the current file position"
msgstr "无法得到当前文件的位置"

#: dpkg-deb/extract.c:106
msgid "failed setting the current file position"
msgstr "无法设置当前文件的位置"

#: dpkg-deb/extract.c:130
#, c-format
msgid "failed to read archive `%.255s'"
msgstr "读取包文件“%.255s”失败"

#: dpkg-deb/extract.c:131
msgid "failed to fstat archive"
msgstr "fstat 包文件失败"

#: dpkg-deb/extract.c:132
msgid "version number"
msgstr "版本号"

#: dpkg-deb/extract.c:141
msgid "between members"
msgstr "成员间"

#: dpkg-deb/extract.c:146 dpkg-split/info.c:105
#, c-format
msgid "file `%.250s' is corrupt - bad magic at end of first header"
msgstr "文件“%.250s”已损毁 - 在第一个文件头末尾有错误的魔数(magic)"

#: dpkg-deb/extract.c:148
msgid "member length"
msgstr "成员长度"

#: dpkg-deb/extract.c:151
#, c-format
msgid "file `%.250s' is not a debian binary archive (try dpkg-split?)"
msgstr "文件“%.250s”不是 debian 的二进制包文件(不妨试一下 dpkg-split？)"

#: dpkg-deb/extract.c:154
msgid "header info member"
msgstr "文件头信息成员"

#: dpkg-deb/extract.c:157
msgid "archive has no newlines in header"
msgstr "包文件的文件头中没有换行"

#: dpkg-deb/extract.c:160
msgid "archive has no dot in version number"
msgstr "包文件的版本号中没有点"

#: dpkg-deb/extract.c:163
#, c-format
msgid "archive version %.250s not understood, get newer dpkg-deb"
msgstr "不能识别包文件的版本 %.250s，请升级 dpkg-deb"

#: dpkg-deb/extract.c:172 dpkg-deb/extract.c:196
#, c-format
msgid "skipped member data from %s"
msgstr "忽略了 %s 中的成员数据"

#: dpkg-deb/extract.c:187
#, c-format
msgid "file `%.250s' contains ununderstood data member %.*s, giving up"
msgstr "文件“%.250s”含有未知的数据成员 %.*s，取消操作"

#: dpkg-deb/extract.c:192
#, c-format
msgid "file `%.250s' contains two control members, giving up"
msgstr "文件“%.250s”含有两个控制成员，取消操作"

#: dpkg-deb/extract.c:204
#, c-format
msgid ""
" new debian package, version %s.\n"
" size %ld bytes: control archive= %zi bytes.\n"
msgstr ""
" 新格式的 debian 软件包，格式版本 %s。\n"
" 大小 %ld 字节：主控包=%zi 字节。\n"

#: dpkg-deb/extract.c:218
msgid "control information length"
msgstr "控制信息的长度"

#: dpkg-deb/extract.c:220
#, c-format
msgid "archive has malformatted control length `%s'"
msgstr "压缩文件中的控制信息长度 “%s” 格式有误"

#: dpkg-deb/extract.c:223
#, c-format
msgid ""
" old debian package, version %s.\n"
" size %ld bytes: control archive= %zi, main archive= %ld.\n"
msgstr ""
" 旧格式的 debian 软件包，格式版本 %s。\n"
" 大小 %ld 字节：主控包= %zi 字节，数据及程序包= %ld。\n"

#: dpkg-deb/extract.c:233
msgid "control area"
msgstr "控制区"

#: dpkg-deb/extract.c:239
#, c-format
msgid ""
"dpkg-deb: file looks like it might be an archive which has been\n"
"dpkg-deb:    corrupted by being downloaded in ASCII mode\n"
msgstr ""
"dpkg-deb：该文件看上去似乎原本是一个包文件，但是由于下载它时\n"
"dpkg-deb：使用的是 ASCII 模式，从而导致了包文件被损坏\n"

#: dpkg-deb/extract.c:243
#, c-format
msgid "`%.255s' is not a debian format archive"
msgstr "“%.255s”并非 debian 格式的包文件"

#: dpkg-deb/extract.c:257
msgid "failed to open pipe descriptor `1' in paste"
msgstr "在粘贴时，无法打开管道描述符“1”"

#: dpkg-deb/extract.c:259
msgid "failed to write to gzip -dc"
msgstr "在写入 gzip -dc 时，操作失败"

#: dpkg-deb/extract.c:260
msgid "failed to close gzip -dc"
msgstr "在关闭 gzip -dc 时，操作失败"

#: dpkg-deb/extract.c:267
msgid "failed to syscall lseek to files archive portion"
msgstr "当通过使用系统调用 lseek，以跳到文件档开始处时失败"

#: dpkg-deb/extract.c:276
msgid "failed to write to pipe in copy"
msgstr "写入通向复制的管道时出错"

#: dpkg-deb/extract.c:277
msgid "failed to close pipe in copy"
msgstr "关闭通向复制的管道时出错"

#: dpkg-deb/extract.c:299
msgid "failed to create directory"
msgstr "新建目录失败"

#: dpkg-deb/extract.c:300
msgid "failed to chdir to directory after creating it"
msgstr "新建目录后，chdir 到该目录失败"

#: dpkg-deb/extract.c:302
msgid "failed to chdir to directory"
msgstr "chdir 到目录失败"

#: dpkg-deb/extract.c:321
msgid "failed to exec tar"
msgstr "执行 tar 失败"

#: dpkg-deb/extract.c:327
msgid "<decompress>"
msgstr "<解压缩>"

#: dpkg-deb/extract.c:329
msgid "paste"
msgstr "粘贴"

#: dpkg-deb/extract.c:345 dpkg-deb/extract.c:360 dpkg-deb/info.c:75
#, c-format
msgid "--%s needs a .deb filename argument"
msgstr "--%s 需要一个 .deb 文件的文件名作为参数"

#: dpkg-deb/extract.c:348
#, c-format
msgid ""
"--%s needs a target directory.\n"
"Perhaps you should be using dpkg --install ?"
msgstr ""
"--%s 需要一个目录作为目标目录。\n"
"或许您应该使用 dpkg --install？"

#: dpkg-deb/extract.c:351
#, c-format
msgid "--%s takes at most two arguments (.deb and directory)"
msgstr "--%s 至多能有两个参数(分别是 .deb 文件和目录)"

#: dpkg-deb/extract.c:362
#, c-format
msgid "--%s takes only one argument (.deb filename)"
msgstr "--%s 只带一个参数(即 .deb 文件的文件名)"

#: dpkg-deb/info.c:57
msgid "failed to chdir to `/' for cleanup"
msgstr "进行清理工作时，chdir 到“/”目录失败"

#: dpkg-deb/info.c:79
#, fuzzy
msgid "failed to create temporary directory"
msgstr "生成临时目录的目录名失败"

#: dpkg-deb/info.c:106
msgid "info_spew"
msgstr "info_spew"

#: dpkg-deb/info.c:110
#, c-format
msgid "dpkg-deb: `%.255s' contains no control component `%.255s'\n"
msgstr "dpkg-deb：“%.255s”中没有发现控制组件“%.255s”\n"

#: dpkg-deb/info.c:114
#, c-format
msgid "open component `%.255s' (in %.255s) failed in an unexpected way"
msgstr "打开组件“%.255s”(于 %.255s 目录)失败，失败的原因出乎意料"

#: dpkg-deb/info.c:121
msgid "One requested control component is missing"
msgstr "有一个必要的控制组件没有找到"

#: dpkg-deb/info.c:123
#, c-format
msgid "%d requested control components are missing"
msgstr "共有 %d 个必要的控制组件没有找到"

#: dpkg-deb/info.c:136
#, c-format
msgid "cannot scan directory `%.255s'"
msgstr "无法搜索目录“%.255s”"

#: dpkg-deb/info.c:141
#, c-format
msgid "cannot stat `%.255s' (in `%.255s')"
msgstr "无法 stat “%.255s”(于“%.255s”目录)"

#: dpkg-deb/info.c:144
#, c-format
msgid "cannot open `%.255s' (in `%.255s')"
msgstr "无法打开“%.255s”(于“%.255s”目录)"

#: dpkg-deb/info.c:159 dpkg-deb/info.c:174 dpkg-deb/info.c:188
#, c-format
msgid "failed to read `%.255s' (in `%.255s')"
msgstr "读取“%.255s”(于“%.255s”目录)失败"

#: dpkg-deb/info.c:162
#, c-format
msgid " %7ld bytes, %5d lines   %c  %-20.127s %.127s\n"
msgstr " %7ld 字节，%5d 行   %c  %-20.127s %.127s\n"

#: dpkg-deb/info.c:166
#, c-format
msgid "     not a plain file          %.255s\n"
msgstr "     不是普通文件          %.255s\n"

#: dpkg-deb/info.c:175
msgid "(no `control' file in control archive!)\n"
msgstr "(在主控包中没有发现“control”文件！)\n"

#: dpkg-deb/info.c:203
msgid "could not open the `control' component"
msgstr "无法打开“control”组件"

#: dpkg-deb/info.c:232
msgid "failed during read of `control' component"
msgstr "当读取“control”组件时失败"

#: dpkg-deb/info.c:234
#, c-format
msgid "error closing the '%s' component"
msgstr "关闭“%s”组件时出错"

#: dpkg-deb/info.c:245
msgid "Error in format"
msgstr "格式有误"

#: dpkg-deb/info.c:281
msgid "--contents takes exactly one argument"
msgstr "--contents 需要且仅需一个参数"

#: dpkg-deb/main.c:55
#, c-format
msgid "Debian `%s' package archive backend version %s.\n"
msgstr "Debian“%s”软件包后端打包程序 %s 版。\n"

#: dpkg-deb/main.c:74
#, c-format
msgid ""
"Commands:\n"
"  -b|--build <directory> [<deb>]   Build an archive.\n"
"  -c|--contents <deb>              List contents.\n"
"  -I|--info <deb> [<cfile> ...]    Show info to stdout.\n"
"  -W|--show <deb>                  Show information on package(s)\n"
"  -f|--field <deb> [<cfield> ...]  Show field(s) to stdout.\n"
"  -e|--control <deb> [<directory>] Extract control info.\n"
"  -x|--extract <deb> <directory>   Extract files.\n"
"  -X|--vextract <deb> <directory>  Extract & list files.\n"
"  --fsys-tarfile <deb>             Output filesystem tarfile.\n"
"\n"
msgstr ""
"命令：\n"
"  -b|--build <目录> [<deb>]        构建一个软件包。\n"
"  -c|--contents <deb>              列出所含内容。\n"
"  -I|--info <deb> [<cfile> ...]    打印相关信息到标准输出。\n"
"  -W|--show <deb>                  打印对应软件包的简明信息。\n"
"  -f|--field <deb> [<cfield> ...]  把字段内容打印到标准输出。\n"
"  -e|--control <deb> [<目录>]      将主控信息解压。\n"
"  -x|--extract <deb> <目录>        将所有文件解压。\n"
"  -X|--vextract <deb> <目录>       解压所有文件并打印其列表。\n"
"  --fsys-tarfile <deb>             输出文件系统的 tar 文件。\n"

#: dpkg-deb/main.c:92
#, c-format
msgid ""
"<deb> is the filename of a Debian format archive.\n"
"<cfile> is the name of an administrative file component.\n"
"<cfield> is the name of a field in the main `control' file.\n"
"\n"
msgstr ""
"<deb> 是 Debian 格式归档文件的文件名。\n"
"<cfile> 是管理文件组件的文件名。\n"
"<cfield> 是主“control”文件中的属性字段的名字。\n"
"\n"

#: dpkg-deb/main.c:98
#, fuzzy, c-format
msgid ""
"Options:\n"
"  --showformat=<format>            Use alternative format for --show.\n"
"  -D                               Enable debugging output.\n"
"  --old, --new                     Select archive format.\n"
"  --nocheck                        Suppress control file check (build bad\n"
"                                     packages).\n"
"  -z#                              Set the compression level when building.\n"
"  -Z<type>                         Set the compression type used when "
"building.\n"
"                                     Allowed types: gzip, xz, bzip2, lzma, "
"none.\n"
"\n"
msgstr ""
"选项：\n"
"  --showformat=<格式>              用于 --show 的替代格式输出.\n"
"  -D                               开启调试信息的输出.\n"
"  --old，--new                     选择档案的格式.\n"
"  --nocheck                        关闭对主控文件的检查(可能导致生成\n"
"                                     坏的软件包)。\n"
"  -z#                              设置构造软件包时，使用的压缩率。\n"
"  -Z<类型>                         设置建档时所使用的压缩类型。\n"
"                                     可用值：gzip、bzip2、lzma、none。\n"
"\n"

#: dpkg-deb/main.c:119
#, c-format
msgid ""
"\n"
"Use `dpkg' to install and remove packages from your system, or\n"
"`dselect' or `aptitude' for user-friendly package management.  Packages\n"
"unpacked using `dpkg-deb --extract' will be incorrectly installed !\n"
msgstr ""
"\n"
"使用“dpkg”命令可以在系统中安装和卸载软件包，\n"
"“dselect”命令则用于简便的软件包管理。另外，\n"
"通过“dpkg-deb --extract”命令解压的软件包将不\n"
"会被正确安装！\n"

#: dpkg-deb/main.c:131
msgid ""
"Type dpkg-deb --help for help about manipulating *.deb files;\n"
"Type dpkg --help for help about installing and deinstalling packages."
msgstr ""
"输入 dpkg-deb --help 可获得有关操作 *.deb 文件的帮助；\n"
"输入 dpkg --help 可获得有关安装和卸载软件包的帮助。"

#: dpkg-deb/main.c:151
#, fuzzy, c-format
msgid "invalid integer for -%c: '%.250s'"
msgstr "--%s 有一个无效的数字参数：“%.250s”"

#: dpkg-deb/main.c:154
#, fuzzy, c-format
msgid "invalid compression level for -%c: %ld'"
msgstr "--%s 有一个无效的数字参数：“%.250s”"

#: dpkg-deb/main.c:208
#, c-format
msgid "unknown compression type `%s'!"
msgstr "无法识别的压缩类型“%s”！"

#: dpkg-split/info.c:70
#, c-format
msgid "file `%.250s' is corrupt - %.250s missing"
msgstr "文件“%.250s”已经损毁 - 无法找到 %.250s"

#: dpkg-split/info.c:73
#, c-format
msgid "file `%.250s' is corrupt - missing newline after %.250s"
msgstr "文件“%.250s”已经损毁 - 在 %.250s 后没有发现换行符"

#: dpkg-split/info.c:107
msgid "info length"
msgstr "信息长度"

#: dpkg-split/info.c:116
#, c-format
msgid "file `%.250s' is corrupt - bad padding character (code %d)"
msgstr "文件“%.250s”已经损毁 - 错误的填充字符(其代码为 %d)"

#: dpkg-split/info.c:120
#, c-format
msgid "file `%.250s' is corrupt - nulls in info section"
msgstr "文件“%.250s”已经损毁 - info 小节中发现了空字符(null)"

#: dpkg-split/info.c:125
msgid "format version number"
msgstr "格式版本"

#: dpkg-split/info.c:127
#, c-format
msgid "file `%.250s' is format version `%.250s' - you need a newer dpkg-split"
msgstr ""
"文件“%.250s”格式的版本是“%.250s” - 您需要用更新版本的 dpkg-split 来处理它"

#: dpkg-split/info.c:130
msgid "package name"
msgstr "软件包名："

#: dpkg-split/info.c:131
msgid "package version number"
msgstr "软件包版本号"

#: dpkg-split/info.c:132
msgid "package file MD5 checksum"
msgstr "软件包文件 MD5 校验和"

#: dpkg-split/info.c:135
#, c-format
msgid "file `%.250s' is corrupt - bad MD5 checksum `%.250s'"
msgstr "文件“%.250s”已经损毁 - MD5 校验和“%.250s”不符"

#: dpkg-split/info.c:137 dpkg-split/info.c:138
msgid "total length"
msgstr "总长度"

#: dpkg-split/info.c:139 dpkg-split/info.c:140
msgid "part offset"
msgstr "部分偏移量"

#: dpkg-split/info.c:142
msgid "part numbers"
msgstr "部分版本号"

#: dpkg-split/info.c:144
#, c-format
msgid "file `%.250s' is corrupt - no slash between part numbers"
msgstr "文件“%.250s”已经损毁 - 在分块编号之间没有发现斜杠"

#: dpkg-split/info.c:147
msgid "number of parts"
msgstr "部分的数量"

#: dpkg-split/info.c:149
#, c-format
msgid "file '%.250s' is corrupt - bad number of parts"
msgstr "文件“%.250s”已经损毁 - 部分编号有误"

#: dpkg-split/info.c:151
msgid "parts number"
msgstr "部分号"

#: dpkg-split/info.c:153
#, c-format
msgid "file `%.250s' is corrupt - bad part number"
msgstr "文件“%.250s”已经损毁 - 分块编号有误"

#: dpkg-split/info.c:161
#, c-format
msgid "file `%.250s' is corrupt - bad magic at end of second header"
msgstr "文件“%.250s”已经损毁 - 在第二个文件头末尾的魔数(magic)有误"

#: dpkg-split/info.c:163
#, c-format
msgid "file `%.250s' is corrupt - second member is not data member"
msgstr "文件“%.250s”已经损毁 - 第二个成员不是数据成员"

#: dpkg-split/info.c:166
msgid "data length"
msgstr "数据长度"

#: dpkg-split/info.c:170
#, c-format
msgid "file `%.250s' is corrupt - wrong number of parts for quoted sizes"
msgstr "文件“%.250s”已经损毁 - 标称大小的分块的数量有误"

#: dpkg-split/info.c:174
#, c-format
msgid "file `%.250s' is corrupt - size is wrong for quoted part number"
msgstr "文件“%.250s”已经损毁 - 标称分块编号的长度有误"

#: dpkg-split/info.c:180
#, c-format
msgid "unable to fstat part file `%.250s'"
msgstr "无法 fstat 分块文件“%.250s”"

#: dpkg-split/info.c:186
#, c-format
msgid "file `%.250s' is corrupt - too short"
msgstr "文件“%.250s”已经损毁 - 文件过小"

#: dpkg-split/info.c:198 dpkg-split/info.c:241
#, c-format
msgid "cannot open archive part file `%.250s'"
msgstr "无法打开存档的分块文件“%.250s”"

#: dpkg-split/info.c:200
#, c-format
msgid "file `%.250s' is not an archive part"
msgstr "文件“%.250s”并非一个包文件的分块文件"

#: dpkg-split/info.c:205
#, c-format
msgid ""
"%s:\n"
"    Part format version:            %s\n"
"    Part of package:                %s\n"
"        ... version:                %s\n"
"        ... MD5 checksum:           %s\n"
"        ... length:                 %lu bytes\n"
"        ... split every:            %lu bytes\n"
"    Part number:                    %d/%d\n"
"    Part length:                    %zi bytes\n"
"    Part offset:                    %lu bytes\n"
"    Part file size (used portion):  %lu bytes\n"
"\n"
msgstr ""
"%s：\n"
"    分块文件的格式版本：            %s\n"
"    是这个软件包的分块：            %s\n"
"         ... 版本：                 %s\n"
"         ... MD5 校验和：           %s\n"
"         ... 大小：                 %lu 字节\n"
"         ... 每个分块的大小：       %lu 字节\n"
"    分块文件的编号：                %d/%d\n"
"    分块文件的中分块的大小：        %zi 字节\n"
"    分块文件的偏移位置：            %lu 字节\n"
"    分块文件(被使用的部分)的大小：  %lu 字节\n"
"\n"

#: dpkg-split/info.c:236 dpkg-split/join.c:112
#, c-format
msgid "--%s requires one or more part file arguments"
msgstr "--%s 需要一个或多个部分文件作为参数"

#: dpkg-split/info.c:247
#, c-format
msgid "file `%s' is not an archive part\n"
msgstr "文件“%s” 不是一个包文件的分块文件\n"

#: dpkg-split/join.c:45
#, c-format
msgid "Putting package %s together from %d parts: "
msgstr "从 %2$d 个部分整合软件包 %1$s："

#: dpkg-split/join.c:53
#, c-format
msgid "unable to open output file `%.250s'"
msgstr "无法打开输出文件“%.250s”"

#: dpkg-split/join.c:57
#, c-format
msgid "unable to (re)open input part file `%.250s'"
msgstr "无法(重新)打开作为输入的分块文件“%.250s”"

#: dpkg-split/join.c:77
#, c-format
msgid "done\n"
msgstr "好了\n"

#: dpkg-split/join.c:93
#, c-format
msgid "files `%.250s' and `%.250s' are not parts of the same file"
msgstr "文件“%.250s”和“%.250s”并不同属一个包文件的分块文件"

#: dpkg-split/join.c:98
#, c-format
msgid "there are several versions of part %d - at least `%.250s' and `%.250s'"
msgstr "第 %d 个分块文件有好几个版本 - 其中至少有“%.250s”和“%.250s”两个"

#: dpkg-split/join.c:135
#, c-format
msgid "part %d is missing"
msgstr "缺少第 %d 个分块"

#: dpkg-split/main.c:46
#, c-format
msgid "Debian `%s' package split/join tool; version %s.\n"
msgstr "Debian %s 软件包切割/重组工具 %s 版。\n"

#: dpkg-split/main.c:48
#, c-format
msgid "Copyright (C) 1994-1996 Ian Jackson.\n"
msgstr "版权所有(C) 1994-1996 Ian Jackson。\n"

#: dpkg-split/main.c:66
#, c-format
msgid ""
"Commands:\n"
"  -s|--split <file> [<prefix>]     Split an archive.\n"
"  -j|--join <part> <part> ...      Join parts together.\n"
"  -I|--info <part> ...             Display info about a part.\n"
"  -a|--auto -o <complete> <part>   Auto-accumulate parts.\n"
"  -l|--listq                       List unmatched pieces.\n"
"  -d|--discard [<filename> ...]    Discard unmatched pieces.\n"
"\n"
msgstr ""
"命令：\n"
"  -s|--split <文件> [<前缀>]          分割包文件。\n"
"  -j|--join <分块文件> <分块文件> ... 把各个分块合并到一起。\n"
"  -I|--info <分块文件> ...            显示分块文件的相关信息。\n"
"  -a|--auto -o <完整> <分块文件>      自动累积分块文件。\n"
"  -l|--listq                          列出不匹配的部分。\n"
"  -d|-discard [<文件名> ...]          忽略不匹配的部分。\n"
"\n"

#: dpkg-split/main.c:81
#, c-format
msgid ""
"Options:\n"
"  --depotdir <directory>           Use <directory> instead of %s/%s.\n"
"  -S|--partsize <size>             In KiB, for -s (default is 450).\n"
"  -o|--output <file>               For -j (default is <package>-<version>."
"deb).\n"
"  -Q|--npquiet                     Be quiet when -a is not a part.\n"
"  --msdos                          Generate 8.3 filenames.\n"
"\n"
"Exit status: 0 = OK;  1 = -a is not a part;  2 = trouble!\n"
msgstr ""
"选项：\n"
"  --depotdir <目录>                使用<目录>而非 %s/%s。\n"
"  -S|--partsize <大小>             -s 的单位改用 KiB (默认是 450)。\n"
"  -o|--output <文件>               对应 -j (默认文件名是 <软件包名>-<版本号>."
"deb)。\n"
"  -Q|--npquiet                     不用 -a 时，少输出信息。\n"
"  --msdos                          使用 8.3 的文件名格式。\n"
"\n"
"返回状态：0 = 一切正常；  1 = -a 不是一个部分；  2 = 出问题了！\n"

#: dpkg-split/main.c:97
msgid "Type dpkg-split --help for help."
msgstr "输入 dpkg-split --help 就可以阅读帮助信息。"

#: dpkg-split/main.c:107 dpkg-split/main.c:111
#, c-format
msgid "error reading %.250s"
msgstr "读取 %.250s 时出错"

#: dpkg-split/main.c:112
#, c-format
msgid "unexpected end of file in %.250s"
msgstr "在 %.250s 中发现未预期的文件结束符"

#: dpkg-split/main.c:125
msgid "part size is far too large or is not positive"
msgstr "分块文件的大小已远远超长或者不是正数"

#: dpkg-split/main.c:129
#, c-format
msgid "part size must be at least %d KiB (to allow for header)"
msgstr "分块文件的大小必须大于 %d KiB (为了容下文件头)"

#: dpkg-split/queue.c:78
#, c-format
msgid "unable to read depot directory `%.250s'"
msgstr "无法读取用于存放文件的目录“%.250s”"

#: dpkg-split/queue.c:117
msgid "--auto requires the use of the --output option"
msgstr "--auto 命令需要与 --output 选项一同使用"

#: dpkg-split/queue.c:119
msgid "--auto requires exactly one part file argument"
msgstr "--auto 命令需要且仅需要一个分块文件的文件名作为参数"

#: dpkg-split/queue.c:123
#, c-format
msgid "unable to read part file `%.250s'"
msgstr "无法读取分块文件“%.250s”"

#: dpkg-split/queue.c:126
#, c-format
msgid "File `%.250s' is not part of a multipart archive.\n"
msgstr "文件“%.250s”并非多卷包文件的一个分块文件。\n"

#: dpkg-split/queue.c:154
#, c-format
msgid "unable to reopen part file `%.250s'"
msgstr "无法打开分块文件“%.250s”"

#: dpkg-split/queue.c:158
#, c-format
msgid "part file `%.250s' has trailing garbage"
msgstr "分块文件“%.250s”的尾部有无用的数据"

#: dpkg-split/queue.c:167
#, c-format
msgid "unable to open new depot file `%.250s'"
msgstr "无法打开新的存储文件“%.250s”"

#: dpkg-split/queue.c:175
#, c-format
msgid "unable to rename new depot file `%.250s' to `%.250s'"
msgstr "无法将新的存储文件“%.250s”重命名为“%.250s”"

#: dpkg-split/queue.c:177
#, c-format
msgid "Part %d of package %s filed (still want "
msgstr "软件包 %2$s 共有 %1$d 个分块被存档 (但还缺少 "

#: dpkg-split/queue.c:181
msgid " and "
msgstr " 和 "

#: dpkg-split/queue.c:195
#, c-format
msgid "unable to delete used-up depot file `%.250s'"
msgstr "无法删除用毕的存储文件“%.250s”"

#: dpkg-split/queue.c:214
msgid "Junk files left around in the depot directory:\n"
msgstr "在存储目录留下了一些垃圾文件：\n"

#: dpkg-split/queue.c:219 dpkg-split/queue.c:243
#, c-format
msgid "unable to stat `%.250s'"
msgstr "无法 stat “%.250s”"

#: dpkg-split/queue.c:222
#, c-format
msgid " %s (%lu bytes)\n"
msgstr " %s (%lu 字节)\n"

#: dpkg-split/queue.c:224
#, c-format
msgid " %s (not a plain file)\n"
msgstr " %s (非普通文件)\n"

#: dpkg-split/queue.c:229
msgid "Packages not yet reassembled:\n"
msgstr "包文件尚未被重新组合好：\n"

#: dpkg-split/queue.c:234
#, c-format
msgid " Package %s: part(s) "
msgstr " 软件包 %s: 部分"

#: dpkg-split/queue.c:245
#, c-format
msgid "part file `%.250s' is not a plain file"
msgstr "分块文件“%.250s”不是一个普通文件"

#: dpkg-split/queue.c:250
#, c-format
msgid "(total %lu bytes)\n"
msgstr "(共计 %lu 字节)\n"

#: dpkg-split/queue.c:274
#, c-format
msgid "unable to discard `%.250s'"
msgstr "无法忽略“%.250s”"

#: dpkg-split/queue.c:275
#, c-format
msgid "Deleted %s.\n"
msgstr "已将 %s 删除。\n"

#: dpkg-split/split.c:49
msgid "--split needs a source filename argument"
msgstr "--split 需要一个原始文件作为参数"

#: dpkg-split/split.c:52
msgid "--split takes at most a source filename and destination prefix"
msgstr "--split 需要至多一个原始文件，以及目标文件的文件名前缀作为参数"

#: dpkg-split/split.c:67
#, c-format
msgid "unable to open source file `%.250s'"
msgstr "无法打开原始文件“%.250s”"

#: dpkg-split/split.c:68
msgid "unable to fstat source file"
msgstr "无法 fstat 原始文件"

#: dpkg-split/split.c:69
#, c-format
msgid "source file `%.250s' not a plain file"
msgstr "原始文件“%.250s”不是普通文件"

#: dpkg-split/split.c:75
msgid "unable to exec mksplit"
msgstr "无法 exec mksplit"

#: scripts/dpkg-divert.pl:34
msgid ""
"\n"
"Copyright (C) 1995 Ian Jackson.\n"
"Copyright (C) 2000,2001 Wichert Akkerman."
msgstr ""
"\n"
"版权所有 (C) 1995 Ian Jackson。\n"
"版权所有 (C) 2000,2001 Wichert Akkerman。"

#: scripts/dpkg-divert.pl:46
#, perl-format
msgid ""
"Usage: %s [<option> ...] <command>\n"
"\n"
"Commands:\n"
"  [--add] <file>           add a diversion.\n"
"  --remove <file>          remove the diversion.\n"
"  --list [<glob-pattern>]  show file diversions.\n"
"  --listpackage <file>     show what package diverts the file.\n"
"  --truename <file>        return the diverted file.\n"
"\n"
"Options:\n"
"  --package <package>      name of the package whose copy of <file> will "
"not\n"
"                             be diverted.\n"
"  --local                  all packages' versions are diverted.\n"
"  --divert <divert-to>     the name used by other packages' versions.\n"
"  --rename                 actually move the file aside (or back).\n"
"  --admindir <directory>   set the directory with the diversions file.\n"
"  --test                   don't do anything, just demonstrate.\n"
"  --quiet                  quiet operation, minimal output.\n"
"  --help                   show this help message.\n"
"  --version                show the version.\n"
"\n"
"When adding, default is --local and --divert <original>.distrib.\n"
"When removing, --package or --local and --divert must match if specified.\n"
"Package preinst/postrm scripts should always specify --package and --"
"divert.\n"
msgstr ""
"用法：%s [<选项> ...] <命令>\n"
"\n"
"命令：\n"
"  [--add] <文件名>         添加一个转移项。\n"
"  --remove <文件名>        删除这个转移项。\n"
"  --list [<glob 模式>]     列出各文件转移项。\n"
"  --listpackage <文件>     显示哪个软件包转移了指定文件。\n"
"  --truename <文件名>      返回被转移的原始文件。\n"
"\n"
"选项：\n"
"  --package <软件包名>     该软件包中的 <文件名> 副本将不会被转移。\n"
"  --local                  所有软件包的版本均会被转移。\n"
"  --divert <转移目标名>    其它软件包版本将转而使用的文件名。\n"
"  --rename                 实际上把该文件挪开(或是还原)。\n"
"  --admindir <目录名>      设置转移文件所在的目录。\n"
"  --test                   仅仅演示要进行的操作，而不是真正的执行它们。\n"
"  --quiet                  安静模式，输出尽可能少的信息。<\n"
"  --help                   显示本帮助信息。\n"
"  --version                显示版本信息。\n"
"\n"
"当添加转移项的时候，默认的选项是 --local 和 --divert <原始文件名>.distrib。\n"
"在删除转移项的时候，--package 或 --local 选项和 --divert 选项必须一致。\n"
"软件包的 preinst 和 postrm 脚本通常应当指定 --package 和 --divert 选项。\n"

#: scripts/dpkg-divert.pl:92
#, perl-format
msgid "two commands specified: %s and --%s"
msgstr "指定了两个命令：%s 和 --%s"

#: scripts/dpkg-divert.pl:130
#, perl-format
msgid "--%s needs a divert-to argument"
msgstr "--%s 需要一个 divert-to 参数"

#: scripts/dpkg-divert.pl:132
msgid "divert-to may not contain newlines"
msgstr "divert-to 不可以含有换行符"

#: scripts/dpkg-divert.pl:134
#, perl-format
msgid "--%s needs a <package> argument"
msgstr "--%s 需要一个 <package> 参数"

#: scripts/dpkg-divert.pl:136
msgid "package may not contain newlines"
msgstr "软件包不可以含有换行符"

#: scripts/dpkg-divert.pl:141 scripts/update-alternatives.pl:142
#, perl-format
msgid "unknown option `%s'"
msgstr "未知选项 “%s”"

#: scripts/dpkg-divert.pl:147
#, perl-format
msgid "cannot open diversions: %s"
msgstr "无法打开转移项：%s"

#: scripts/dpkg-divert.pl:151
msgid "missing altname"
msgstr "找不到 altname"

#: scripts/dpkg-divert.pl:154
msgid "missing package"
msgstr "找不到软件包"

#: scripts/dpkg-divert.pl:162 scripts/dpkg-divert.pl:166
#, perl-format
msgid "filename \"%s\" is not absolute"
msgstr "文件名 “%s” 并不是绝对的"

#: scripts/dpkg-divert.pl:164
msgid "Cannot divert directories"
msgstr "不能转移目录"

#: scripts/dpkg-divert.pl:167
#, fuzzy, perl-format
msgid "cannot divert file '%s' to itself"
msgstr "不能转移目录"

#: scripts/dpkg-divert.pl:174
#, perl-format
msgid "Leaving `%s'"
msgstr "正在离开 “%s”"

#: scripts/dpkg-divert.pl:177
#, perl-format
msgid "`%s' clashes with `%s'"
msgstr "“%s” 与 “%s” 冲突"

#: scripts/dpkg-divert.pl:183
#, perl-format
msgid "Adding `%s'"
msgstr "正在添加 “%s”"

#: scripts/dpkg-divert.pl:193
#, perl-format
msgid ""
"mismatch on divert-to\n"
"  when removing `%s'\n"
"  found `%s'"
msgstr ""
"在删除“%s”时\n"
"  转移目标名不匹配\n"
"  发现了“%s”"

#: scripts/dpkg-divert.pl:195
#, perl-format
msgid ""
"mismatch on package\n"
"  when removing `%s'\n"
"  found `%s'"
msgstr ""
"删除“%s”时\n"
"  软件包名不匹配\n"
"  发现了“%s”"

#: scripts/dpkg-divert.pl:197
#, perl-format
msgid "Removing `%s'"
msgstr "正在删除 “%s”"

#: scripts/dpkg-divert.pl:211
#, perl-format
msgid "No diversion `%s', none removed"
msgstr "没有 “%s” 转移项，因此没有作出删除"

#: scripts/dpkg-divert.pl:257
#, perl-format
msgid "internal error - bad mode `%s'"
msgstr "内部错误 - 不正常的模式 “%s”"

#: scripts/dpkg-divert.pl:271
#, perl-format
msgid "cannot stat old name `%s': %s"
msgstr "无法取得旧名称 “%s” 的信息：%s"

#: scripts/dpkg-divert.pl:273
#, perl-format
msgid "cannot stat new name `%s': %s"
msgstr "无法取得新名称 “%s” 的信息：%s"

#: scripts/dpkg-divert.pl:290 scripts/dpkg-divert.pl:297
#, perl-format
msgid "error checking `%s': %s"
msgstr "处理 “%s” 时出错：%s"

#: scripts/dpkg-divert.pl:301
#, perl-format
msgid ""
"rename involves overwriting `%s' with\n"
"  different file `%s', not allowed"
msgstr ""
"更改 “%2$s” 文件名会复盖 “%1$s”，\n"
"  不允許此操作"

#: scripts/dpkg-divert.pl:316
#, perl-format
msgid "rename: remove duplicate old link `%s': %s"
msgstr "改名：移除重复的旧连接 “%s”：%s"

#: scripts/dpkg-divert.pl:319
#, perl-format
msgid "rename: rename `%s' to `%s': %s"
msgstr "改名：更改 “%s” 的名称为 “%s”：%s"

#: scripts/dpkg-divert.pl:326
#, perl-format
msgid "create diversions-new: %s"
msgstr "创建 diversions-new：%s"

#: scripts/dpkg-divert.pl:330
#, perl-format
msgid "write diversions-new: %s"
msgstr "写入 diversions-new：%s"

#: scripts/dpkg-divert.pl:332
#, perl-format
msgid "close diversions-new: %s"
msgstr "关闭 diversions-new：%s"

#: scripts/dpkg-divert.pl:334
#, perl-format
msgid "remove old diversions-old: %s"
msgstr "移除旧有的转移项：%s"

#: scripts/dpkg-divert.pl:336
#, perl-format
msgid "create new diversions-old: %s"
msgstr "创建新的 diversions-old：%s"

#: scripts/dpkg-divert.pl:338
#, perl-format
msgid "install new diversions: %s"
msgstr "安装新的转移项：%s"

#: scripts/dpkg-divert.pl:367
#, perl-format
msgid "internal error: %s corrupt: %s"
msgstr "内部错误：%s 损坏：%s"

#: scripts/update-alternatives.pl:64
#, perl-format
msgid "unknown argument `%s'"
msgstr "无法识别的参数“%s”"

#: scripts/update-alternatives.pl:79
msgid "--install needs <link> <name> <path> <priority>"
msgstr "--install 需要 <链接> <名称> <路径> <优先级>"

#: scripts/update-alternatives.pl:84 scripts/update-alternatives.pl:109
msgid "<link> and <path> can't be the same"
msgstr "<链接> 和 <路径> 不能相同"

#: scripts/update-alternatives.pl:85
msgid "priority must be an integer"
msgstr "优先级必须为整数"

#: scripts/update-alternatives.pl:93
#, perl-format
msgid "--%s needs <name> <path>"
msgstr "--%s 需要 <名称> <路径>"

#: scripts/update-alternatives.pl:98
#, perl-format
msgid "--%s needs <name>"
msgstr "--%s 需要 <名称>"

#: scripts/update-alternatives.pl:103
msgid "--slave only allowed with --install"
msgstr "--slave 只能搭配 --install 使用"

#: scripts/update-alternatives.pl:105
msgid "--slave needs <link> <name> <path>"
msgstr "--slave 需要 <链接> <名称> <路径>"

#: scripts/update-alternatives.pl:110
#, perl-format
msgid "name %s is both primary and slave"
msgstr "文件名 %s 同时是主要和次要"

#: scripts/update-alternatives.pl:113
#, perl-format
msgid "slave name %s duplicated"
msgstr "次要名称 %s 有重复"

#: scripts/update-alternatives.pl:117
#, perl-format
msgid "slave link %s duplicated"
msgstr "次要链接 %s 有重复"

#: scripts/update-alternatives.pl:118
#, perl-format
msgid "link %s is both primary and slave"
msgstr "链接 %s 同时是主要和次要"

#: scripts/update-alternatives.pl:124
#, perl-format
msgid "--%s needs a <file> argument"
msgstr "--%s 需要一个<文件>参数"

#: scripts/update-alternatives.pl:146
msgid ""
"need --display, --query, --list, --get-selections, --config,--set, --set-"
"selections, --install, --remove, --all, --remove-all or --auto"
msgstr ""
"需要 --display, --query, --list, --get-selections, --config, --set, --set-"
"selections, --install, --remove, --all, --remove-all 或 --auto"

#: scripts/update-alternatives.pl:170
#, perl-format
msgid "alternative %s can't be master: %s"
msgstr "替换项 %s 不能是主要项：%s"

#: scripts/update-alternatives.pl:171 scripts/update-alternatives.pl:192
#, perl-format
msgid "it is a slave of %s"
msgstr "这是 %s 的一个次要项"

#: scripts/update-alternatives.pl:174 scripts/update-alternatives.pl:196
#, perl-format
msgid "alternative link %s is already managed by %s."
msgstr "替换链接 %s 已经由 %s 来管理了。"

#: scripts/update-alternatives.pl:177 scripts/update-alternatives.pl:199
#, perl-format
msgid "alternative link is not absolute as it should be: %s"
msgstr "替换链接不是绝对链接，它应该是绝对链接：%s"

#: scripts/update-alternatives.pl:179 scripts/update-alternatives.pl:201
#, perl-format
msgid "alternative path is not absolute as it should be: %s"
msgstr "替换路径不是绝对路径，它应该是绝对路径：%s"

#: scripts/update-alternatives.pl:181
#, perl-format
msgid "alternative path %s doesn't exist."
msgstr "替代路径 %s 不存在"

#: scripts/update-alternatives.pl:183 scripts/update-alternatives.pl:203
#, perl-format
msgid "alternative name (%s) must not contain '/' and spaces."
msgstr "替换名称(%s)不可包含“/”和空格。"

#: scripts/update-alternatives.pl:189
#, perl-format
msgid "alternative %s can't be slave of %s: %s"
msgstr "替代项 %s 作为 %s 的次要项：%s"

#: scripts/update-alternatives.pl:191
msgid "it is a master alternative."
msgstr "这是一个主替换项。"

#: scripts/update-alternatives.pl:228 scripts/update-alternatives.pl:233
#, perl-format
msgid "Call %s."
msgstr "调用 %s。"

#: scripts/update-alternatives.pl:237
#, perl-format
msgid "Alternative %s unchanged because choice %s is not available."
msgstr "替换项 %s 未改变，因为选项 %s 不可用。"

#: scripts/update-alternatives.pl:242
#, perl-format
msgid "Skip unknown alternative %s."
msgstr "跳过位置替换项 %s。"

#: scripts/update-alternatives.pl:256 scripts/update-alternatives.pl:259
#, perl-format
msgid "no alternatives for %s."
msgstr "无 %s 的替换项。"

#: scripts/update-alternatives.pl:282
#, perl-format
msgid "%s is dangling, it will be updated with best choice."
msgstr "%s 正处于未决状态中，将以最佳选项更新它。"

#: scripts/update-alternatives.pl:286
#, perl-format
msgid ""
"%s has been changed (manually or by a script). Switching to manual updates "
"only."
msgstr "%s 已更改(由于手动更改或通过脚本)。切换成仅手动更新。"

#: scripts/update-alternatives.pl:294
#, perl-format
msgid "setting up automatic selection of %s."
msgstr "正在设置 %s 的自动选择。"

#: scripts/update-alternatives.pl:303
#, perl-format
msgid "alternative %s for %s not registered, not setting."
msgstr "%2$s 的替换项 %1$s 没有注册，不予设置。"

#: scripts/update-alternatives.pl:312
#, perl-format
msgid "There is no program which provides %s."
msgstr "没有程序提供 %s。"

#: scripts/update-alternatives.pl:313 scripts/update-alternatives.pl:321
msgid "Nothing to configure."
msgstr "无需配置。"

#: scripts/update-alternatives.pl:319
#, perl-format
msgid "There is only one alternative in link group %s: %s"
msgstr "链接组 %s 中只有一个替换项：%s"

#: scripts/update-alternatives.pl:329
#, perl-format
msgid "alternative %s for %s not registered, not removing."
msgstr "%2$s 的替换项 %1$s 没有注册，不予移除。"

#: scripts/update-alternatives.pl:336
#, perl-format
msgid "removing manually selected alternative - switching %s to auto mode"
msgstr "正在移除手动选择的替代项 - 切换 %s 到自动模式"

#: scripts/update-alternatives.pl:352
#, perl-format
msgid "renaming %s link from %s to %s."
msgstr "正在将链接 %s 的名称从 %s 改成 %s。"

#: scripts/update-alternatives.pl:370
#, perl-format
msgid "renaming %s slave link from %s to %s."
msgstr "正在将次要链接 %s 的名称从 %s 改成 %s。"

#: scripts/update-alternatives.pl:387
#, perl-format
msgid "automatic updates of %s are disabled, leaving it alone."
msgstr "%s 的自动更新功能已禁用，保持现状。"

#: scripts/update-alternatives.pl:389
#, perl-format
msgid "to return to automatic updates use `update-alternatives --auto %s'."
msgstr "要回复成自动更新请执行 “update-alternatives --auto %s”。"

#: scripts/update-alternatives.pl:405
#, perl-format
msgid "using %s to provide %s (%s) in %s."
msgstr "使用 %s 来提供 %s (%s)，于 %s 中。"

#: scripts/update-alternatives.pl:591
#, perl-format
msgid "unable to make %s a symlink to %s: %s"
msgstr "无法创建 %s 为 %s 的符号链接(symlink)：%s"

#: scripts/update-alternatives.pl:597
#, perl-format
msgid "unable to install %s as %s: %s"
msgstr "无法把 %s 安装为 %s：%s"

#: scripts/update-alternatives.pl:602
#, perl-format
msgid "unable to remove %s: %s"
msgstr "无法移除 %s：%s"

#: scripts/update-alternatives.pl:765
#, perl-format
msgid "while reading %s: %s"
msgstr "当读取 %s 时：%s"

#: scripts/update-alternatives.pl:766
#, perl-format
msgid "unexpected end of file in %s while trying to read %s"
msgstr "在读取 %2$s 时在 %1$s 中遇到非预期的文件结束符"

#: scripts/update-alternatives.pl:774
#, perl-format
msgid "%s corrupt: %s"
msgstr "%s 损坏：%s"

#: scripts/update-alternatives.pl:779
#, perl-format
msgid "newlines prohibited in update-alternatives files (%s)"
msgstr "update-alternatives 文件(%s)禁止换行符"

#: scripts/update-alternatives.pl:781
#, perl-format
msgid "while writing %s: %s"
msgstr "当写入 %s 时：%s"

#: scripts/update-alternatives.pl:789
#, perl-format
msgid "unable to read %s: %s"
msgstr "无法读取 %s：%s"

#: scripts/update-alternatives.pl:791
msgid "status"
msgstr "状态"

#: scripts/update-alternatives.pl:792
msgid "invalid status"
msgstr "无效状态"

#: scripts/update-alternatives.pl:793
#, fuzzy
msgid "master link"
msgstr "主要文件"

#: scripts/update-alternatives.pl:795
msgid "slave name"
msgstr "次要名称"

#: scripts/update-alternatives.pl:796
msgid "slave link"
msgstr "次要链接"

#: scripts/update-alternatives.pl:797
#, perl-format
msgid "duplicate slave %s"
msgstr "重复的次要 %s"

#: scripts/update-alternatives.pl:799
#, perl-format
msgid "slave link same as main link %s"
msgstr "次要的链接与主要链接 %s 相同"

#: scripts/update-alternatives.pl:801
#, perl-format
msgid "duplicate slave link %s"
msgstr "重复的次要链接 %s"

#: scripts/update-alternatives.pl:808
msgid "master file"
msgstr "主要文件"

#: scripts/update-alternatives.pl:809
#, perl-format
msgid "duplicate path %s"
msgstr "重复路径 %s"

#: scripts/update-alternatives.pl:812 scripts/update-alternatives.pl:826
msgid "priority"
msgstr "优先级"

#: scripts/update-alternatives.pl:813
#, perl-format
msgid "priority of %s: %s"
msgstr "%s 的优先级：%s"

#: scripts/update-alternatives.pl:817 scripts/update-alternatives.pl:828
msgid "slave file"
msgstr "次要文件"

#: scripts/update-alternatives.pl:822
#, perl-format
msgid ""
"alternative %s (part of link group %s) doesn't exist. Removing from list of "
"alternatives."
msgstr "替换项 %s(链接组 %s 的一部分)不存在。从替换项列表中移除。"

#: scripts/update-alternatives.pl:861
#, perl-format
msgid "discarding obsolete slave link %s (%s)."
msgstr "舍弃废弃的次要链接 %s(%s)。"

#: scripts/update-alternatives.pl:867
#, perl-format
msgid "unable to write %s: %s"
msgstr "无法写进 %s：%s"

#: scripts/update-alternatives.pl:889
#, perl-format
msgid "unable to close %s: %s"
msgstr "无法关闭 %s：%s"

#: scripts/update-alternatives.pl:924 scripts/update-alternatives.pl:970
msgid "auto mode"
msgstr "自动模式"

#: scripts/update-alternatives.pl:924 scripts/update-alternatives.pl:979
msgid "manual mode"
msgstr "手动模式"

#: scripts/update-alternatives.pl:927
#, fuzzy, perl-format
msgid "  link currently points to %s"
msgstr " 链接目前指向 %s"

#: scripts/update-alternatives.pl:929
#, fuzzy
msgid "  link currently absent"
msgstr " 链接目前不存在"

#: scripts/update-alternatives.pl:933
#, perl-format
msgid "%s - priority %s"
msgstr "%s - 优先级 %s"

#: scripts/update-alternatives.pl:936
#, fuzzy, perl-format
msgid "  slave %s: %s"
msgstr " slave %s：%s"

#: scripts/update-alternatives.pl:943
#, fuzzy, perl-format
msgid "Current 'best' version is '%s'."
msgstr "目前“最佳”的版本为 %s。"

#: scripts/update-alternatives.pl:945
msgid "No versions available."
msgstr "无适用版本。"

#: scripts/update-alternatives.pl:959
#, perl-format
msgid "There are %s choices for the alternative %s (providing %s)."
msgstr "有 %s 个选项可用于替换项 %s (提供 %s)。"

#: scripts/update-alternatives.pl:965
msgid "Selection"
msgstr "选择"

#: scripts/update-alternatives.pl:966
msgid "Path"
msgstr "路径"

#: scripts/update-alternatives.pl:966
msgid "Priority"
msgstr "优先级"

#: scripts/update-alternatives.pl:966
msgid "Status"
msgstr "状态"

#: scripts/update-alternatives.pl:983
msgid "Press enter to keep the current choice[*], or type selection number: "
msgstr "要维持当前值[*]请按回车键，或者键入选择的编号："

#: scripts/update-alternatives.pl:1017
#, perl-format
msgid "readlink(%s) failed: %s"
msgstr "readlink(%s) 失败：%s"

#: scripts/update-alternatives.pl:1030
#, perl-format
msgid "can't install unknown choice %s"
msgstr ""

#: scripts/update-alternatives.pl:1047 scripts/update-alternatives.pl:1068
#, perl-format
msgid "not replacing %s with a link."
msgstr "未将 %s 替换为链接。"

#: scripts/update-alternatives.pl:1071
#, perl-format
msgid ""
"skip creation of %s because associated file %s (of link group %s) doesn't "
"exist."
msgstr "跳过创建 %s 因为所关联文件 %s (位于链接组 %s)不存在。"

#~ msgid "failed in buffer_write(fd) (%i, ret=%li): %s"
#~ msgstr "buffer_write(fd) (%i, ret=%li) 时出错：%s"

#~ msgid "eof in buffer_write(stream): %s"
#~ msgstr "buffer_write(stream) 中 eof：%s"

#~ msgid "error in buffer_write(stream): %s"
#~ msgstr "buffer_write(stream) 中出错：%s"

#~ msgid "failed in buffer_read(fd): %s"
#~ msgstr "buffer_read(fd) 中出错：%s"

#~ msgid "error in buffer_read(stream): %s"
#~ msgstr "buffer_read(stream) 出错：%s"

#~ msgid "%s returned error exit status %d"
#~ msgstr "%s 返回了错误的退出状态码 %d"

#~ msgid "%s killed by signal (%s)%s"
#~ msgstr "%s 被信号(%s)%s 终止了"

#~ msgid ""
#~ "This is free software; see the GNU General Public Licence version 2 or\n"
#~ "later for copying conditions. There is NO warranty.\n"
#~ msgstr ""
#~ "此软件是自由软件；要获知复制该软件的条件，请参阅 GNU 公共许可证\n"
#~ "第二版或其更新的版本。本软件【不】提供任何担保。\n"

#~ msgid ""
#~ "\n"
#~ "This is free software; see the GNU General Public Licence version 2 or\n"
#~ "later for copying conditions. There is NO warranty.\n"
#~ msgstr ""
#~ "\n"
#~ "这是自由软件；要获知复制该软件的条件，请参阅 GNU 公共许可证\n"
#~ "第二版或其更新的版本。该软件【不】提供任何担保。\n"

#~ msgid "%s: failed to exec '%s %s'"
#~ msgstr "%s：执行 ‘%s %s” 失败"

#~ msgid "%s: internal gzip error: read: `%s'"
#~ msgstr "%s：内部 gzip 错误：读取：“%s”"

#~ msgid "%s: internal gzip error: write: `%s'"
#~ msgstr "%s：内部 gzip 错误：写入：“%s”"

#~ msgid "%s: internal gzip error: read(%i) != write(%i)"
#~ msgstr "%s：内部 gzip 错误：读取(%i) != 写入(%i)"

#~ msgid "%s: internal bzip2 error: read: `%s'"
#~ msgstr "%s：内部 bzip2 错误：读取：“%s”"

#~ msgid "%s: internal bzip2 error: write: `%s'"
#~ msgstr "%s：内部 bzip2 错误：写入：“%s”"

#~ msgid "%s: internal bzip2 error: read(%i) != write(%i)"
#~ msgstr "%s：内部 bzip2 错误：读取(%i) != 写入(%i)"

#~ msgid "cannot open GPL file"
#~ msgstr "无法打开 GPL 许可证文件"

#~ msgid "Don't forget to foreground (`fg') this process when you're done !\n"
#~ msgstr "请不要忘了在您完成操作后，把这个进程切换到前台(用“fg”)！\n"

#~ msgid ""
#~ "This is free software; see the GNU General Public License version 2 or\n"
#~ "later for copying conditions. There is NO warranty.\n"
#~ "See %s --license for copyright and license details.\n"
#~ msgstr ""
#~ "本软件是自由软件；要获知复制该软件的前提和条件，请参阅 GNU 公共许可证的\n"
#~ "第二版或其更新的版本。本软件【不】提供任何担保。\n"
#~ "请使用 %s --license 以查看版权和许可证的细节。\n"

#~ msgid "failed to exec %s"
#~ msgstr "执行 %s 失败"

#~ msgid "unable to get unique filename for control info"
#~ msgstr "控制信息无法得到唯一的文件名"

#~ msgid "Debian `%s' package management program query tool\n"
#~ msgstr "”Debian %s 软件包管理程序查询工具\n"

#~ msgid ""
#~ "Use --help for help about querying packages;\n"
#~ "Use --license for copyright license and lack of warranty (GNU GPL)."
#~ msgstr ""
#~ "使用 --help 可获得软件包查询方面的帮助；\n"
#~ "使用 --licence 可阅读版权、许可证和无担保的说明 (GNU GPL)。"

#~ msgid "failed to chown %s: %s"
#~ msgstr "chown %s 时失败：%s"

#~ msgid "failed to chmod %s: %s"
#~ msgstr "chmod %s 时失败：%s"

#~ msgid "failed to fork for cleanup"
#~ msgstr "进行清理工作时，fork 失败"

#~ msgid "failed to wait for rm cleanup"
#~ msgstr "进行清理工作时，等待 rm 子进程失败"

#~ msgid "rm cleanup failed, code %d\n"
#~ msgstr "使用 rm 进行清理失败，返回状态数为 %d\n"

#~ msgid "failed to exec rm -rf"
#~ msgstr "执行 rm -rf 失败"

#~ msgid "failed to read `control' (in `%.255s')"
#~ msgstr "读取“control”文件(于“%.255s”目录)失败"

#~ msgid "unable to seek back"
#~ msgstr "无法向后查找"

#~ msgid "unknown data type `%i' in buffer_write\n"
#~ msgstr "buffer_write 中无法识别的数据类型“%i”\n"

#~ msgid "unknown data type `%i' in buffer_read\n"
#~ msgstr "buffer_read 中无法识别的数据类型“%i”\n"

#~ msgid "wait for shell failed"
#~ msgstr "等待 shell 子进程退出失败"

#~ msgid "read error in diversions [i]"
#~ msgstr "读取转移项(diversions)时发生读错误 [i]"

#~ msgid "unlink"
#~ msgstr "unlink"

#~ msgid "chmod"
#~ msgstr "chmod"

#~ msgid "delete"
#~ msgstr "删除"

#~ msgid "failed to %s '%.255s'"
#~ msgstr "%s “%.255s”失败"

#~ msgid "wait for dpkg-split failed"
#~ msgstr "等待 dpkg-split 子进程失败"

#~ msgid "cannot remove file `%.250s'"
#~ msgstr "无法删除文件“%.250s”"

#~ msgid ""
#~ "\n"
#~ "Copyright (C) 2000 Wichert Akkerman."
#~ msgstr ""
#~ "\n"
#~ "版权所有 (C) 2000 Wichert Akkerman。"

#~ msgid "no mode specified"
#~ msgstr "没有指定模式"

#~ msgid "illegal user %s"
#~ msgstr "非法的使用者 %s"

#~ msgid "non-existing user %s"
#~ msgstr "不存在的使用者 %s"

#~ msgid "illegal group %s"
#~ msgstr "非法的群组 %s"

#~ msgid "non-existing group %s"
#~ msgstr "不存在的群组 %s"

#~ msgid "illegal mode %s"
#~ msgstr "非法的模式 %s"

#~ msgid "aborting"
#~ msgstr "放弃"

#~ msgid "cannot open statoverride: %s"
#~ msgstr "无法打开 statoverride：%s"

#~ msgid "Multiple overrides for \"%s\", aborting"
#~ msgstr "“%s”出现多个强制选项(overrides)，放弃中"

#~ msgid "failed write during hashreport"
#~ msgstr "在写入 hashreport 时写入失败"

#~ msgid "configuration error: unknown option %s"
#~ msgstr "配置错误：未知选项 %s"

#~ msgid "configuration error: %s does not take a value"
#~ msgstr "配置错误：命令 %s 并不需要有选项值"

#~ msgid "dpkg: version '%s' has bad syntax: %s\n"
#~ msgstr "dpkg: 版本号 “%s” 有语法错误：%s\n"

#, fuzzy
#~ msgid "unexecpted end of line in statoverride file"
#~ msgstr "statoverride 文件有非预期的行结束符"

#~ msgid "--check-supported takes no arguments"
#~ msgstr "--check-supported 不接受任何参数"

#~ msgid "--forget-old-unavail takes no arguments"
#~ msgstr "--forget-old-unavail 不需带任何参数"

#~ msgid ""
#~ "\n"
#~ "Copyright (C) 1994,1995 Ian Jackson."
#~ msgstr ""
#~ "\n"
#~ "版权所有 (C) 1994,1995 Ian Jackson。"

#~ msgid ""
#~ "Usage: %s [<options> ...] [--] <filename>\n"
#~ "\n"
#~ "Options:\n"
#~ "  --section <regexp> <title>\n"
#~ "                           put the new entry in the <regex> matched "
#~ "section\n"
#~ "                           or create a new one with <title> if non-"
#~ "existent.\n"
#~ "  --menuentry=<text>       set the menu entry.\n"
#~ "  --description=<text>     set the description to be used in the menu "
#~ "entry.\n"
#~ "  --info-file=<path>       specify info file to install in the "
#~ "directory.\n"
#~ "  --dir-file=<path>        specify file name of info directory file.\n"
#~ "  --infodir=<directory>    same as '--dir-file=<directory>/dir'.\n"
#~ "  --info-dir=<directory>   likewise.\n"
#~ "  --keep-old               do not replace entries nor remove empty ones.\n"
#~ "  --remove                 remove the entry specified by <filename> "
#~ "basename.\n"
#~ "  --remove-exactly         remove the exact <filename> entry.\n"
#~ "  --test                   enables test mode (no actions taken).\n"
#~ "  --debug                  enables debug mode (show more information).\n"
#~ "  --quiet                  do not show output messages.\n"
#~ "  --help                   show this help message.\n"
#~ "  --version                show the version.\n"
#~ msgstr ""
#~ "用法：%s [<选项> ...] [--] <文件名>\n"
#~ "\n"
#~ "选项：\n"
#~ "  --section <正则表达式> <标题>\n"
#~ "                           将新的条目加入与 <正则表达式> 匹配的小节中，\n"
#~ "                           如果没有相符的小节，就以 <标题> 为名新建一"
#~ "个。\n"
#~ "  --menuentry=<文本>       设置菜单项。\n"
#~ "  --description=<文本>     设置菜单项所要用到的描述信息。\n"
#~ "  --info-file=<路径>       指定要安装到给定目录里的的 info 文件。\n"
#~ "  --dir-file=<路径>        指定 info 目录文件的文件名。\n"
#~ "  --infodir=<目录名>       等价于 “--dir-file=<目录名>/dir”。\n"
#~ "  --keep-old               不替换已有条目，即使它们为空。\n"
#~ "  --remove                 去除 <文件名> 作为 basename 所指定条目。\n"
#~ "  --remove-exactly         去除名称就是 <文件名> 的条目。\n"
#~ "  --test                   开启测试模式(不执行相应的操作)。\n"
#~ "  --debug                  开启调试模式(显示更多的相关信息)。\n"
#~ "  --quiet                  不显示输出信息。\n"
#~ "  --help                   显示本帮助信息。\n"
#~ "  --version                显示版本信息。\n"

#~ msgid "could not open stderr for output! %s"
#~ msgstr "无法打开标准错误(stderr)来输出信息！ %s"

#~ msgid "%s: --section needs two more args"
#~ msgstr "%s: --section 还需要两个参数"

#~ msgid "%s: option --%s is deprecated (ignored)"
#~ msgstr "%s：选项 --%s 已废弃(忽略此选项)"

#~ msgid "%s: unknown option `%s'"
#~ msgstr "%s：未知选项 “%s”"

#~ msgid "%s: too many arguments"
#~ msgstr "%s：参数过多"

#~ msgid "%s: --section ignored with --remove"
#~ msgstr "%s：--remove 忽略 --section 选项"

#~ msgid "%s: --description ignored with --remove"
#~ msgstr "%s：--remove 忽略 --description 选项"

#~ msgid "%s: test mode - dir file will not be updated"
#~ msgstr "%s：测试模式 - 目录文件将不会被更新"

#~ msgid "%s: warning, ignoring confusing INFO-DIR-ENTRY in file."
#~ msgstr "%s：警告，忽略文件里引起混擾的 INFO-DIR-ENTRY。"

#~ msgid "invalid info entry"
#~ msgstr "无效的 info 条目"

#~ msgid ""
#~ "\n"
#~ "No `START-INFO-DIR-ENTRY' and no `This file documents'.\n"
#~ "%s: unable to determine description for `dir' entry - giving up\n"
#~ msgstr ""
#~ "\n"
#~ "缺少 “START-INFO-DIR-ENTRY” 和 “This file documents”。\n"
#~ "%s：无法辨识 “dir” 项的描述句 - 放弃中\n"

#~ msgid "%s: no file %s, retrieving backup file %s."
#~ msgstr "%s：缺少 %s 文件，正在获取备份文件 %s。"

#~ msgid "%s: copying %s to %s failed, giving up: %s"
#~ msgstr "%s：复制 %s 至 %s 时出错，放弃中：%s"

#~ msgid "%s: no backup file %s available, retrieving default file."
#~ msgstr "%s：备份文件 %s 不存在，正在获取默认文件。"

#~ msgid "%s: no backup file %s available."
#~ msgstr "%s：备份文件 %s 不存在。"

#~ msgid "%s: no default file %s available, giving up."
#~ msgstr "%s：默认文件 %s 不存在，放弃中。"

#~ msgid "%s: failed to lock dir for editing! %s"
#~ msgstr "%s：未能把目录锁定以编辑！ %s"

#~ msgid "try deleting %s?"
#~ msgstr "尝试删除 %s 吗？"

#~ msgid "unable to open %s: %s"
#~ msgstr "无法打开 %s：%s"

#~ msgid "unable to close %s after read: %s"
#~ msgstr "读取完之后无法关闭 %s：%s"

#~ msgid "%s: existing entry for `%s' not replaced"
#~ msgstr "%s：“%s” 的条目已存在，不被替代"

#~ msgid "%s: replacing existing dir entry for `%s'"
#~ msgstr "%s：为 “%s” 替代已存在的目录项"

#~ msgid "%s: creating new section `%s'"
#~ msgstr "%s：正在创建新类别 “%s”"

#~ msgid "%s: no sections yet, creating Miscellaneous section too."
#~ msgstr "%s：尚无任何类别，且创建 Miscellaneous 类别中。"

#~ msgid "%s: no section specified for new entry, placing at end"
#~ msgstr "%s：新条目没有指定类别，放在最后"

#~ msgid "%s: deleting entry `%s ...'"
#~ msgstr "%s：删除条目 “%s…”"

#~ msgid "%s: empty section `%s' not removed"
#~ msgstr "%s：空类别 “%s” 没被移除"

#~ msgid "%s: deleting empty section `%s'"
#~ msgstr "%s：正在删除空类别 “%s”"

#~ msgid "%s: no entry for file `%s' and menu entry `%s'"
#~ msgstr "%s：文件 “%s” 和菜单项 “%s” 皆无条目"

#~ msgid "%s: no entry for file `%s'"
#~ msgstr "%s：文件 “%s” 没有条目"

#~ msgid "unable to create %s: %s"
#~ msgstr "无法创建 %s：%s"

#~ msgid "unable to backup old %s, giving up: %s"
#~ msgstr "无法备份旧的 %s，放弃备份：%s"

#~ msgid "unable to install new %s: %s"
#~ msgstr "无法安装新的 %s：%s”"

#~ msgid "unable to unlock %s: %s"
#~ msgstr "无法解锁 %s：%s"

#~ msgid "%s: could not backup %s in %s: %s"
#~ msgstr "%1$s：无法在 %3$s 备份 %2$s：%4$s"

#~ msgid "%s: warning - unable to unlock %s: %s"
#~ msgstr "%s：警告 - 无法解锁 %s：%s"

#~ msgid "unable to read %s: %d"
#~ msgstr "无法读取 %s：%d"

#~ msgid "dbg: %s"
#~ msgstr "dbg：%s"

#~ msgid "failed to open tmpfile (control), %s"
#~ msgstr "打开临时文件(控制信息)失败，%s"

#~ msgid "failed to open tmpfile (data), %s"
#~ msgstr "新建临时文件(数据)失败，%s"

#~ msgid "invalid number for --command-fd"
#~ msgstr "--command-fd 有一个无效的数字参数"

#~ msgid "unable to open tmpfile for vsnprintf"
#~ msgstr "无法为 vsnprintf 新建临时文件"

#~ msgid "unable to rewind at start of vsnprintf"
#~ msgstr "无法在 vsnprintf 开始时中跳到起始位置"

#~ msgid "unable to truncate in vsnprintf"
#~ msgstr "vsnprintf 无法 truncate"

#~ msgid "write error in vsnprintf"
#~ msgstr "vsnprintf 写错误"

#~ msgid "unable to stat in vsnprintf"
#~ msgstr "vsnprintf 无法统计"

#~ msgid "unable to rewind in vsnprintf"
#~ msgstr "vsnprintf 无法跳到起始位置"

#~ msgid "read error in vsnprintf truncated"
#~ msgstr "当 vsnprintf 删节时发生读错误"

#~ msgid "System error no.%d"
#~ msgstr "系统错误，错误代号：%d"

#~ msgid "Signal no.%d"
#~ msgstr "信号 no.%d"

#~ msgid "dpkg: warning - %s returned error exit status %d\n"
#~ msgstr "dpkg：警告 - %s 退出时返回了错误号 %d\n"

#~ msgid "dpkg: warning - %s killed by signal (%s)%s\n"
#~ msgstr "dpkg：警告 - %s 被信号(%s)终止了%s\n"

#~ msgid "failed to read `%s' at line %d"
#~ msgstr "无法读取“%s”文件的第“%d”行"

#~ msgid "parse error, in file `%.255s' near line %d"
#~ msgstr "语法分析错误，在“%.255s”文件的第“%d”行附近"

#~ msgid " package `%.255s'"
#~ msgstr " 软件包“%.255s”"

#~ msgid "failed to realloc for variable buffer"
#~ msgstr "为变量缓冲区 realloc 时失败"

#~ msgid "process_archive ...  already disappeared !"
#~ msgstr "process_archive ...  已经消失了！"

#~ msgid "gobble replaced file `%.255s'"
#~ msgstr "大批量读取替换文件“%.255s”"

#~ msgid "dpkg: %s: warning - failed to remove `%.250s': %s\n"
#~ msgstr "dpkg：%s：警告 - 无法删除“%.250s”：%s\n"

#~ msgid "--audit does not take any arguments"
#~ msgstr "--audit 不需要任何参数"

#~ msgid "--yet-to-unpack does not take any arguments"
#~ msgstr "--yet-to-unpack 不需要任何参数"

#~ msgid "--assert-* does not take any arguments"
#~ msgstr "--assert-* 不需要任何参数"

#~ msgid "--predep-package does not take any argument"
#~ msgstr "--predep-package 不需要任何参数"

#~ msgid "--print-architecture does not take any argument"
#~ msgstr "--print-architecture 不需要任何参数"

#~ msgid "unable to ignore signal %s before running script"
#~ msgstr "无法在运行脚本前，忽略信号 %s"

#~ msgid "unable to stat installed %s script `%.250s'"
#~ msgstr "无法 stat 已安装的 %s 脚本“%.250s”"

#~ msgid "unable to stat new %s script `%.250s'"
#~ msgstr "无法 stat 新的 %s 脚本“%.250s”"

#~ msgid "unable to execute new %s"
#~ msgstr "无法执行新的 %s"

#~ msgid "dpkg: warning - unable to stat %s `%.250s': %s\n"
#~ msgstr "dpkg：警告 - 无法 stat %s “%.250s”：%s\n"

#~ msgid "--set-selections does not take any argument"
#~ msgstr "--set-selections 不需要任何参数"

#~ msgid "--clear-selections does not take any argument"
#~ msgstr "--set-selections 不需要任何参数"

#~ msgid "--build needs a directory argument"
#~ msgstr "--build 需要一个目录名作为参数"

#~ msgid ""
#~ "dpkg-deb: warning, not checking contents of control area.\n"
#~ "dpkg-deb: building an unknown package in `%s'.\n"
#~ msgstr ""
#~ "dpkg-deb：警告，没有检查控制区的内容。\n"
#~ "dpkg-deb：正在在“%s“内新建一个未知的包文件。\n"

#~ msgid "Internal error, compress_type `%i' unknown!"
#~ msgstr "内部错误，未知的压缩类型“%i”！"

#~ msgid "realloc failed (%zu bytes)"
#~ msgstr "realloc 失败(%zu 字节)"

#~ msgid "--join requires one or more part file arguments"
#~ msgstr "--join 选项需要一个或多个分块文件的文件名作为参数"

#~ msgid "--listq does not take any arguments"
#~ msgstr "--listq 不需要任何参数"

#~ msgid ""
#~ "\n"
#~ "Copyright (C) 1996 Kim-Minh Kaplan."
#~ msgstr ""
#~ "\n"
#~ "版权所有 (C) 1996 Kim-Minh Kaplan。"

#~ msgid ""
#~ "Usage: %s [<option> ...] [--] [<dirname>]\n"
#~ "\n"
#~ "Options:\n"
#~ "  --unsafe     set some additional possibly useful options.\n"
#~ "               warning: this option may garble an otherwise correct "
#~ "file.\n"
#~ "  --help       show this help message.\n"
#~ "  --version    show the version.\n"
#~ msgstr ""
#~ "用法：%s [<选项> ...] [--] [<目录名>]\n"
#~ "\n"
#~ "选项：\n"
#~ "  --unsafe      设置一些其它可能有用的选项。\n"
#~ "                  警告：该选项可能会破坏一个原本正确无误的文件。\n"
#~ "  --help        显示本帮助信息。\n"
#~ "  --version     显示版本信息。\n"

#~ msgid "try deleting %s"
#~ msgstr "尝试删除 %s"

#~ msgid "failed to install %s; it will be left as %s: %s"
#~ msgstr "安裝 %s 失败，它会被放在 %s：%s"

#~ msgid "%s: unable to unlock %s: %s"
#~ msgstr "%s：无法解锁 %s；%s"

#~ msgid ""
#~ "Usage: %s [<option> ...] <command>\n"
#~ "\n"
#~ "Commands:\n"
#~ "  --install <link> <name> <path> <priority>\n"
#~ "    [--slave <link> <name> <path>] ...\n"
#~ "                           add a group of alternatives to the system.\n"
#~ "  --remove <name> <path>   remove <path> from the <name> group "
#~ "alternative.\n"
#~ "  --remove-all <name>      remove <name> group from the alternatives "
#~ "system.\n"
#~ "  --auto <name>            switch the master link <name> to automatic "
#~ "mode.\n"
#~ "  --display <name>         display information about the <name> group.\n"
#~ "  --list <name>            display all targets of the <name> group.\n"
#~ "  --config <name>          show alternatives for the <name> group and ask "
#~ "the\n"
#~ "                           user to select which one to use.\n"
#~ "  --set <name> <path>      set <path> as alternative for <name>.\n"
#~ "  --all                    call --config on all alternatives.\n"
#~ "\n"
#~ "<link> is the symlink pointing to %s/<name>.\n"
#~ "  (e.g. /usr/bin/pager)\n"
#~ "<name> is the master name for this link group.\n"
#~ "  (e.g. pager)\n"
#~ "<path> is the location of one of the alternative target files.\n"
#~ "  (e.g. /usr/bin/less)\n"
#~ "<priority> is an integer; options with higher numbers have higher "
#~ "priority in\n"
#~ "  automatic mode.\n"
#~ "\n"
#~ "Options:\n"
#~ "  --altdir <directory>     change the alternatives directory.\n"
#~ "  --admindir <directory>   change the administrative directory.\n"
#~ "  --verbose                verbose operation, more output.\n"
#~ "  --quiet                  quiet operation, minimal output.\n"
#~ "  --help                   show this help message.\n"
#~ "  --version                show the version.\n"
#~ msgstr ""
#~ "用法：%s [<选项> ...] <命令>\n"
#~ "\n"
#~ "命令：\n"
#~ "  --install <链接> <名称> <路径> <优先级>\n"
#~ "    [--slave <链接> <名称> <路径>] ...\n"
#~ "                           在系统中加入一组替换项。\n"
#~ "  --remove <名称> <路径>   从 <名称> 替换组中去除 <路径> 项。\n"
#~ "  --remove-all <名称>      从替换系统中删除 <名称> 替换组。\n"
#~ "  --auto <名称>            将 <名称> 的主链接切换到自动模式。\n"
#~ "  --display <名称>         显示关于 <名称> 替换组的信息。\n"
#~ "  --list <名称>            列出 <名称> 替换组中所有的可用替换项。\n"
#~ "  --config <名称>          列出 <名称> 替换组中的可选项，并就使用其中\n"
#~ "                           哪一个，征询用户的意见。\n"
#~ "  --set <名称> <路径>      将 <路径> 设置为 <名称> 的替换项。\n"
#~ "  --all                    对所有可选项一一调用 --config 命令。\n"
#~ "\n"
#~ "<链接> 是指向 %s/<名称> 的符号链接。\n"
#~ "    (如 /usr/bin/pager)\n"
#~ "<名称> 是该链接替换组的主控名。\n"
#~ "    (如 pager)\n"
#~ "<路径> 是替换项目标文件的位置。\n"
#~ "    (如 /usr/bin/less)\n"
#~ "<优先级> 是一个整数，在自动模式下，这个数字越高的选项，其优先级也就越"
#~ "高。\n"
#~ "\n"
#~ "选项：\n"
#~ "   --altdir <目录>         指定不同的可选项目录。\n"
#~ "   --admindir <目录>       指定不同的管理目录。\n"
#~ "   --verbose               详尽的操作进行信息，更多的输出。\n"
#~ "   --quiet                 安静模式，输出尽可能少的信息。\n"
#~ "   --help                  显示本帮助信息。\n"
#~ "   --version               显示版本信息。\n"

#~ msgid "%s - status is %s."
#~ msgstr "%s - 状态为 %s"

#~ msgid " link unreadable - %s"
#~ msgstr " 链接无法读取 - %s"

#~ msgid ""
#~ "warning: %s is supposed to be a symlink to %s, \n"
#~ "or nonexistent; however, readlink failed: %s"
#~ msgstr ""
#~ "警告：%s 应该是指向 %s 的符号链接，\n"
#~ "或者不存在；但读取链接失败：%s"

#~ msgid "Leaving %s (%s) pointing to %s."
#~ msgstr "维持 %s(%s)指向 %s。"

#~ msgid "Updating %s (%s) to point to %s."
#~ msgstr "正在更新 %s(%s)指向 %s。"

#~ msgid "Removing %s (%s), not appropriate with %s."
#~ msgstr "正在移除 %s(%s)，不适用于 %s。"

#~ msgid ""
#~ "Checking available versions of %s, updating links in %s ...\n"
#~ "(You may modify the symlinks there yourself if desired - see `man ln'.)"
#~ msgstr ""
#~ "检查 %s 的可用版本，正在更新 %s 中的链接…\n"
#~ "(如果愿意，您也可以自行修改符号链接 (symlink) - 请参阅 “man ln”。)"

#~ msgid "unable to rename %s to %s: %s"
#~ msgstr "无法把 %s 改名为 %s：%s"

#~ msgid "slave link name %s duplicated"
#~ msgstr "次要链接名称 %s 已重复"

#~ msgid "Recovering from previous failed update of %s ..."
#~ msgstr "正在从上一次更新 %s 的失败中恢复…"

#~ msgid "unable to open %s for write: %s"
#~ msgstr "无法打开文件 “%s” 以写入：%s"

#~ msgid "Last package providing %s (%s) removed, deleting it."
#~ msgstr "最后一个提供 %s(%s)的软件包已移除，删除中。"

#~ msgid ""
#~ "There is only 1 program which provides %s\n"
#~ "(%s). Nothing to configure.\n"
#~ msgstr ""
#~ "只有一个程序提供 %s\n"
#~ "(%s)。无须做任何配置。\n"

#~ msgid ""
#~ "There are %s alternatives which provide `%s'.\n"
#~ "\n"
#~ "  Selection    Alternative\n"
#~ "-----------------------------------------------\n"
#~ msgstr ""
#~ "现有 %s 个可选项，它们都提供了“%s”<\n"
#~ "\n"
#~ "    选择        可选项\n"
#~ "-----------------------------------------------\n"

#~ msgid "error writing stdout: %s"
#~ msgstr "写入标准输出(stdout)时出错：%s"

#~ msgid "error or eof reading %s for %s (%s)"
#~ msgstr "%2$s：读取 %1$s 时出错或是 eof (%3$s)"

#~ msgid "missing newline after %s"
#~ msgstr "在 %s 后缺少换行符"

#~ msgid "Serious problem: %s"
#~ msgstr "严重问题：%s"

#~ msgid "couldn't allocate memory for strdup in findpackage(%s)"
#~ msgstr "在搜索软件包(%s)时无法为 strdup 申请内存"

#~ msgid "failed to allocate buffer in buffer_copy (%s)"
#~ msgstr "在 buffer_copy (%s) 中无法申请缓冲区所需的内存"

#~ msgid "Error allocating memory for cfgfilename"
#~ msgstr "为 cfgfilename 申请内存时出错"

#~ msgid "failed to malloc for info file `%.255s'"
#~ msgstr "在读取软件包的 info 文件“%.255s”时，malloc 失败"

#~ msgid "diversions file has too-long line or EOF [i]"
#~ msgstr "转移项(diversions)文件有的行太长，或者含有 EOF [i]"

#~ msgid "read error in diversions [ii]"
#~ msgstr "读取转移项(diversions)时发生读错误 [ii]"

#~ msgid "unexpected EOF in diversions [ii]"
#~ msgstr "在转移项(diversions)文件中发现了预料外的 EOF [ii]"

#~ msgid "fgets gave an empty string from diversions [ii]"
#~ msgstr "fgets 从转移项(diversions)中取回了一个空的字符串 [ii]"

#~ msgid "diversions file has too-long line or EOF [ii]"
#~ msgstr "转移项(diversions)文件有的行太长，或者含有 EOF [ii]"

#~ msgid "read error in diversions [iii]"
#~ msgstr "读取转移项(diversions)时发生读错误 [iii]"

#~ msgid "unexpected EOF in diversions [iii]"
#~ msgstr "在转移项(diversions)文件中发现了预料外的 EOF [iii]"

#~ msgid "fgets gave an empty string from diversions [iii]"
#~ msgstr "fgets 从转移项(diversions)中取回了一个空的字符串 [iii]"

#~ msgid "couldn't malloc in execbackend"
#~ msgstr "无法在 execbackend 中 malloc"

#~ msgid "couldn't strdup in execbackend"
#~ msgstr "无法在 execbackend 中 strdup"

#~ msgid "failed allocating memory for variable `ctrlarea'"
#~ msgstr "为变量“ctrlarea”申请内存时出错"

#~ msgid "Cannot get ENOENT value from %s: %s"
#~ msgstr "无法从 %s 取得 ENOENT 值：%s"

#~ msgid "unable to ensure %s nonexistent: %s"
#~ msgstr "无法确认 %s 不存在：%s"

#~ msgid ""
#~ "warning: %s is supposed to be a slave symlink to\n"
#~ " %s, or nonexistent; however, readlink failed: %s"
#~ msgstr ""
#~ "警告：%s 本该是指向 %s 的次要链接，\n"
#~ "或者不存在；但读取链接失败：%s"

#~ msgid ""
#~ "dpkg: regarding %s containing %s:\n"
#~ " package uses Breaks; not supported in this dpkg\n"
#~ msgstr ""
#~ "dpkg：关于 %s 含有 %s：\n"
#~ " 软件包使用了损坏(Breaks)依赖关系，而这个 dpkg 并不支持\n"

#~ msgid "unsupported dependency problem - not installing %.250s"
#~ msgstr "不支持的依赖关系问题 - 将不安装 %.250s"

#~ msgid "dpkg: warning - ignoring Breaks !\n"
#~ msgstr "dpkg：警告 - 忽视损坏(Breaks)依赖关系！\n"

#~ msgid "diversion by %s"
#~ msgstr "被 %s 转移"

#~ msgid "to"
#~ msgstr "至"

#~ msgid "from"
#~ msgstr "从"

#~ msgid "error reading %s"
#~ msgstr "读取 %s 时出错"

#~ msgid "two modes specified: %s and --%s"
#~ msgstr "指定了两种模式：%s 以及 --%s"

#~ msgid "manflag"
#~ msgstr "manflag"

#~ msgid "%s: failed to exec gzip -dc"
#~ msgstr "%s：exec gzip -dc 失败"

#~ msgid "%s: failed to exec bzip2 -dc"
#~ msgstr "%s：exec bzip2 -dc 失败"

#~ msgid "%s: failed to exec bzip2 %s"
#~ msgstr "%s：exec bzip2 %s 失败"

#~ msgid "`%s' field, reference to `%.255s': version contains ` '"
#~ msgstr "“%s”字段，于“%.255s”：版本号含有“ ”"

#~ msgid "%s: can't open %s: %s"
#~ msgstr "%s：无法打开 %s：%s"

#~ msgid "%s: read %s: %s"
#~ msgstr "%s：读取 %s：%s"

#~ msgid "%s: close %s after read: %s"
#~ msgstr "%s：关闭 %s 在读取之后：%s"

#~ msgid "%s: error closing %s: %s"
#~ msgstr "%s：关闭 %s 出错：%s"

#~ msgid "--admindir needs a directory argument"
#~ msgstr "--admindir 需要一个目录名作为参数"

#~ msgid "--remove needs a single argument"
#~ msgstr "--remove 只需要一个参数"

#~ msgid "--truename needs a single argument"
#~ msgstr "--truename 只需要一个参数"

#~ msgid "--remove needs one arguments"
#~ msgstr "--remove 只需要一个参数"

#~ msgid "dpkg-statoverride: %s"
#~ msgstr "dpkg-statoverride：%s"

#~ msgid "open %s: %s"
#~ msgstr "打开 %s：%s"

#~ msgid "%s: read %s: %d"
#~ msgstr "%s：读取 %s ：%d"

#~ msgid "--admindir needs a <directory> argument"
#~ msgstr "--admindir 需要一个目录名作为参数"

#~ msgid "failed to open %s: %s"
#~ msgstr "打开 %s 失败：%s"

#~ msgid "unable to install %s as %s"
#~ msgstr "无法安装 %s 作为 %s"

#~ msgid ""
#~ "Usage: %s [<option> ...] <command>\n"
#~ "\n"
#~ "Commands:\n"
#~ "  -i|--install       <.deb file name> ... | -R|--recursive <dir> ...\n"
#~ "  --unpack           <.deb file name> ... | -R|--recursive <dir> ...\n"
#~ "  -A|--record-avail  <.deb file name> ... | -R|--recursive <dir> ...\n"
#~ "  --configure        <package-name> ... | -a|--pending\n"
#~ "  -r|--remove        <package-name> ... | -a|--pending\n"
#~ "  -P|--purge         <package-name> ... | -a|--pending\n"
#~ "  --get-selections [<pattern> ...]     Get list of selections to stdout.\n"
#~ "  --set-selections                     Set package selections from "
#~ "stdin.\n"
#~ "  --clear-selections                   Deselect every non-essential "
#~ "package.\n"
#~ "  --update-avail <Packages-file>       Replace available packages info.\n"
#~ "  --merge-avail <Packages-file>        Merge with info from file.\n"
#~ "  --clear-avail                        Erase existing available info.\n"
#~ "  --forget-old-unavail                 Forget uninstalled unavailable "
#~ "pkgs.\n"
#~ "  -s|--status <package-name> ...       Display package status details.\n"
#~ "  -p|--print-avail <package-name> ...  Display available version "
#~ "details.\n"
#~ "  -L|--listfiles <package-name> ...    List files `owned' by package(s).\n"
#~ "  -l|--list [<pattern> ...]            List packages concisely.\n"
#~ "  -S|--search <pattern> ...            Find package(s) owning file(s).\n"
#~ "  -C|--audit                           Check for broken package(s).\n"
#~ "  --print-architecture                 Print dpkg architecture.\n"
#~ "  --compare-versions <a> <rel> <b>     Compare version numbers - see "
#~ "below.\n"
#~ "  --help                               Show this help message.\n"
#~ "  --version                            Show the version.\n"
#~ "  --force-help | -Dh|--debug=help      Help on forcing resp. debugging.\n"
#~ "  --license | --licence                Print copyright licensing terms.\n"
#~ "\n"
#~ "Use dpkg -b|--build|-c|--contents|-e|--control|-I|--info|-f|--field|\n"
#~ " -x|--extract|-X|--vextract|--fsys-tarfile  on archives (type %s --"
#~ "help).\n"
#~ "\n"
#~ "For internal use: dpkg --assert-support-predepends | --predep-package |\n"
#~ "  --assert-working-epoch | --assert-long-filenames | --assert-multi-"
#~ "conrep.\n"
#~ "\n"
#~ "Options:\n"
#~ "  --admindir=<directory>     Use <directory> instead of %s.\n"
#~ "  --root=<directory>         Install on alternative system rooted "
#~ "elsewhere.\n"
#~ "  --instdir=<directory>      Change inst'n root without changing admin "
#~ "dir.\n"
#~ "  -O|--selected-only         Skip packages not selected for install/"
#~ "upgrade.\n"
#~ "  -E|--skip-same-version     Skip packages whose same version is "
#~ "installed.\n"
#~ "  -G|--refuse-downgrade      Skip packages with earlier version than "
#~ "installed.\n"
#~ "  -B|--auto-deconfigure      Install even if it would break some other "
#~ "package.\n"
#~ "  --no-debsig                Do not try to verify package signatures.\n"
#~ "  --no-act|--dry-run|--simulate\n"
#~ "                             Just say what we would do - don't do it.\n"
#~ "  -D|--debug=<octal>         Enable debugging - see -Dhelp or --"
#~ "debug=help.\n"
#~ "  --status-fd <n>            Send status change updates to file "
#~ "descriptor <n>.\n"
#~ "  --log=<filename>           Log status changes and actions to "
#~ "<filename>.\n"
#~ "  --ignore-depends=<package>,... Ignore dependencies involving "
#~ "<package>.\n"
#~ "  --force-...                    Override problems - see --force-help.\n"
#~ "  --no-force-...|--refuse-...    Stop when problems encountered.\n"
#~ "  --abort-after <n>              Abort after encountering <n> errors.\n"
#~ "\n"
#~ "Comparison operators for --compare-versions are:\n"
#~ "  lt le eq ne ge gt       (treat empty version as earlier than any "
#~ "version);\n"
#~ "  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any "
#~ "version);\n"
#~ "  < << <= = >= >> >       (only for compatibility with control file "
#~ "syntax).\n"
#~ "\n"
#~ "Use `dselect' or `aptitude' for user-friendly package management.\n"
#~ msgstr ""
#~ "用法：%s [<选项> ...] <命令>\n"
#~ "\n"
#~ "命令：\n"
#~ "  -i|--install       <.deb 文件名> ... | -R|--recursive <目录> ...\n"
#~ "  --unpack           <.deb 文件名> ... | -R|--recursive <目录> ...\n"
#~ "  -A|--record-avail  <.deb 文件名> ... | -R|--recursive <目录> ...\n"
#~ "  --configure        <软件包名> ... | -a|--pending\n"
#~ "  -r|--remove        <软件包名> ... | -a|--pending\n"
#~ "  -P|--purge         <软件包名> ... | -a|--pending\n"
#~ "  --get-selections [<表达式> ...]     把已选中的软件包的列表打印到标准输"
#~ "出。\n"
#~ "  --set-selections                    从标准输入里读出要选择的软件包列"
#~ "表。\n"
#~ "  --update-avail <Packages 文件>      替换现有可安装的软件包信息。\n"
#~ "  --merge-avail <Package 文件>        把文件中的信息合并到系统中。\n"
#~ "  --clear-avail                       清除现有的软件包信息。\n"
#~ "  --forget-old-unavail                忘却已被卸载的不可安装的软件包。\n"
#~ "  -s|--status <软件包名> ...          显示软件包详尽的状态信息。\n"
#~ "  -p|--print-avail <软件包名> ...     显示可供安装的版本详情。\n"
#~ "  -L|--listfiles <软件包名> ...       列出所有“属于”该软件包(或多个软件包)"
#~ "的文件。\n"
#~ "  -l|--list [<表达式> ...             简明地列出软件包的状态。\n"
#~ "  -S|--search <表达式> ...            搜寻拥有该文件(或多个文件)的软件"
#~ "包。\n"
#~ "  -C|--audit                          检查搜寻残损的软件包。\n"
#~ "  --print-architecture                显示 dpkg 体系架构。\n"
#~ "  --compare-vesions <甲> <关系> <乙>  比较版本号 - 见下。\n"
#~ "  --help                              显示本帮助信息。\n"
#~ "  --version                           显示版本号。\n"
#~ "  --force-help | -Dh|--debug=help     显示强制操作帮助和有关出错调试的帮"
#~ "助。\n"
#~ "  --license | --licence               显示版权和许可证的条文。\n"
#~ "\n"
#~ "可对包文件使用 dpkg -b|--build|-c|--contents|-e|--control|-I|--info|-f|--"
#~ "field|\n"
#~ " -x|--extract|-X|--vextract|--fsys-tarfile 的命令 (可输入 %s --help)。\n"
#~ "\n"
#~ "供内部调用：dpkg --assert-support-predepends | --predep-package |\n"
#~ "  --assert-working-epoch | --assert-long-filenames | --assert-multi-"
#~ "conrep。\n"
#~ "\n"
#~ "选项：\n"
#~ "  --admindir=<目录>          使用 <目录> 而非 %s。\n"
#~ "  --root=<目录>              安装到另一个根文件系统。\n"
#~ "  --instdir=<目录>           改变安装的根目录的同时保持管理(admin)目录不"
#~ "变。\n"
#~ "  -O|--selected-only         忽略没有被选中安装或升级的软件包。\n"
#~ "  -E|--skip-same-version     忽略版本与已安装软件版本相同的软件包。\n"
#~ "  -G|--refuse-downgrade      忽略版本早于已安装软件版本的的软件包。\n"
#~ "  -B|--auto-deconfigure      就算会影响其他软件包，也要安装。\n"
#~ "  --no-debsig                不去试图验证软件包的签名。\n"
#~ "  --no-act|--dry-run|--simulate\n"
#~ "                             仅仅报告我们要执行的操作 - 但是不执行。\n"
#~ "  -D|--debug=<八进制数字>    开启调试功能 - 参见 -Dhelp 或者 --"
#~ "debug=help。\n"
#~ "  --status-fd <n>            发送状态改变的更新信号到文件描述符<n>。\n"
#~ "  --log=<文件名>             记录状态的改变和操作信息至 <文件名>。\n"
#~ "  --ignore-depends=<软件包名>,... 忽略关于 <软件包名> 的所有依赖关系。\n"
#~ "  --force-...                     忽视遇到的问题 - 参见 --force-help。\n"
#~ "  --no-force-...|--refuse-...     当遇到问题时中止运行。\n"
#~ "  --abort-after <n>               当遇到<n>个问题后，中止运行。\n"
#~ "\n"
#~ "--compare-version 所使用的比较运算符有：\n"
#~ " lt le eq ne ge gt       (如果版本号为空，那么就认为它先于任意版本号)；\n"
#~ " lt-nl le-nl ge-nl gt-nl (如果版本号为空，那么就认为它后于任意版本号)；\n"
#~ " < << <= = >= >> >       (仅仅是为了与主控文件的语法兼容)。\n"
#~ "\n"
#~ "“dselect”和“aptitude”提供了更为易用的的软件包管理工具。\n"

#~ msgid "  Package "
#~ msgstr "  软件包 "

#~ msgid " which provides "
#~ msgstr " 提供了 "

#~ msgid " is to be removed.\n"
#~ msgstr " 即将被删除。\n"

#~ msgid "  Version of "
#~ msgstr "  系统里的 "

#~ msgid " on system is "
#~ msgstr " 的版本是 "

#~ msgid " is not installed.\n"
#~ msgstr "还没有被安装。\n"

#~ msgid " to: %s\n"
#~ msgstr " 转移文件现指向：%s\n"

#~ msgid "fgetpos failed"
#~ msgstr "fgetpos 失败"

#~ msgid "fsetpos failed"
#~ msgstr "fsetpos 失败"

#~ msgid ""
#~ "Usage: %s [<option> ...] <command>\n"
#~ "\n"
#~ "Commands:\n"
#~ "  -b|--build <directory> [<deb>]    Build an archive.\n"
#~ "  -c|--contents <deb>               List contents.\n"
#~ "  -I|--info <deb> [<cfile>...]      Show info to stdout.\n"
#~ "  -W|--show <deb>                   Show information on package(s)\n"
#~ "  -f|--field <deb> [<cfield>...]    Show field(s) to stdout.\n"
#~ "  -e|--control <deb> [<directory>]  Extract control info.\n"
#~ "  -x|--extract <deb> <directory>    Extract files.\n"
#~ "  -X|--vextract <deb> <directory>   Extract & list files.\n"
#~ "  --fsys-tarfile <deb>              Output filesystem tarfile.\n"
#~ "  -h|--help                         Display this message.\n"
#~ "  --version                         Show version.\n"
#~ "  --license | --licence             Show license.\n"
#~ "\n"
#~ "<deb> is the filename of a Debian format archive.\n"
#~ "<cfile> is the name of an administrative file component.\n"
#~ "<cfield> is the name of a field in the main `control' file.\n"
#~ "\n"
#~ "Options:\n"
#~ "  --showformat=<format>      Use alternative format for --show.\n"
#~ "  -D                         Enable debugging output.\n"
#~ "  --old, --new               Select archive format.\n"
#~ "  --nocheck                  Suppress control file check (build bad "
#~ "package).\n"
#~ "  -z#                        Set the compression level when building.\n"
#~ "  -Z<type>                   Set the compression type to use when "
#~ "building.\n"
#~ "                             Allowed values: gzip, bzip2, none.\n"
#~ "\n"
#~ msgstr ""
#~ "用法： %s [<选项> ...] <命令>\n"
#~ "\n"
#~ "\n"
#~ "命令：\n"
#~ "  -b|--build <目录> [<deb>]         新建一个包文件。\n"
#~ "  -c|--contents <deb>               列出包文件的内容。\n"
#~ "  -l|--info <deb> [<cfile>...]      将 info 文件打印到标准输出。\n"
#~ "  -W|--show <deb>                   显示软件包的相关信息\n"
#~ "  -f|--field <deb> [<cfield>]...]   打印指定字段到标准输出。\n"
#~ "  -e|--control <deb> [<目录>]       解压缩控制信息。\n"
#~ "  -x|--extract <deb> <目录>         解压缩文件。\n"
#~ "  -X|--vextract <deb> <目录>        解压缩并列出被释放的文件。\n"
#~ "  --fsys-tarfile <deb>              输出文件系统的 tar 归档文件。\n"
#~ "  -h | --help                       显示本帮助文档\n"
#~ "  --version | --licence             显示版本/版权信息。\n"
#~ "\n"
#~ "<deb> 是 debian 格式的包文件的文件名。\n"
#~ "<cfile> 是管理文件组件(administrative file component)的文件名。\n"
#~ "<cfield> 是主“control”文件中的属性字段的名字。\n"
#~ "\n"
#~ "选项：\n"
#~ "  --showformat=<格式>        令 --show 使用其它的格式输出\n"
#~ "  -D                         开启调试信息的输出\n"
#~ "  --old，--new               选择包文件的格式\n"
#~ "  --nocheck                  关闭对主控文件的检查(可能导致生成不能使用的软"
#~ "件包)。\n"
#~ "  -z# 设置构造软件包时，使用的压缩率\n"
#~ "  -Z<type>                   设置建档时所使用的压缩类型。\n"
#~ "                             可用值：gzip、bzip2、none\n"
#~ "\n"

#~ msgid ""
#~ "Usage: %s [<option> ...] <command>\n"
#~ "\n"
#~ "Commands:\n"
#~ "  -s|--split <file> [<prefix>]    Split an archive.\n"
#~ "  -j|--join <part> <part> ...     Join parts together.\n"
#~ "  -I|--info <part> ...            Display info about a part.\n"
#~ "  -h|--help                       Show this help message.\n"
#~ "  --version                       Show the version.\n"
#~ "  --license                       Show the license.\n"
#~ "\n"
#~ "  -a|--auto -o <complete> <part>  Auto-accumulate parts.\n"
#~ "  -l|--listq                      List unmatched pieces.\n"
#~ "  -d|--discard [<filename> ...]   Discard unmatched pieces.\n"
#~ "\n"
#~ "Options:\n"
#~ "  --depotdir <directory>          Use <directory> instead of %s/%s.\n"
#~ "  -S|--partsize <size>            In KiB, for -s (default is 450).\n"
#~ "  -o|--output <file>              For -j (default is <package>-<version>."
#~ "deb).\n"
#~ "  -Q|--npquiet                    Be quiet when -a is not a part.\n"
#~ "  --msdos                         Generate 8.3 filenames.\n"
#~ "\n"
#~ "Exit status: 0 = OK;  1 = -a is not a part;  2 = trouble!\n"
#~ msgstr ""
#~ "用法:%s [<选项> ...] <命令>\n"
#~ "\n"
#~ "命令：\n"
#~ "  -s|--split <文件> [<前缀>]          切割包文件。\n"
#~ "  -j|--join <分块文件> <分块文件> ... 把各个分块合并到一起。\n"
#~ "  -I|--info <分块文件> ...            显示分块文件的相关信息。\n"
#~ "  -h|--help                           显示此帮助信息。\n"
#~ "  --version                           显示版本。\n"
#~ "  --license                           显示许可证。\n"
#~ "\n"
#~ "  -a|--auto -o <完整> <分块文件>      自动累积分块文件。\n"
#~ "  -l|--listq                          列出不匹配的部分。\n"
#~ "  -d|-discard [<文件名> ...]          忽略不匹配的部分。\n"
#~ "\n"
#~ "选项：\n"
#~ "  --depotdir <目录名>                 使用 <目录名> 而非 %s/%s。\n"
#~ "  -S|--partsize <大小>                在 -s 命令中以 Kb 计 (默认值则是 "
#~ "450)。\n"
#~ "  -o|--output <文件>                  用于 -j 命令 (默认为 <软件包名>-<版"
#~ "本号>.deb)。\n"
#~ "  -Q|--npquiet                        当 -a 不是一个分块时，也不输出信"
#~ "息。\n"
#~ "  --msdos                             生成 8.3 的文件名。\n"
#~ "\n"
#~ "返回码: 0 = OK;  1 = -a 不是一个分块;  2 = 出问题啦！\n"

#~ msgid "Search for ? "
#~ msgstr "想搜索什么？"

#~ msgid "Error: "
#~ msgstr "错误："

#~ msgid "Help: "
#~ msgstr "帮助："

#~ msgid "Press ? for help menu, . for next topic, <space> to exit help."
#~ msgstr ""
#~ "摁 ? 可以弹出帮助菜单，用 . 来进入下个主题，通过 <空格> 就能退出帮助界面。"

#~ msgid "Help information is available under the following topics:"
#~ msgstr "您可获得有关下列主题的帮助信息："

#~ msgid ""
#~ "Press a key from the list above, <space> or `q' to exit help,\n"
#~ "  or `.' (full stop) to read each help page in turn. "
#~ msgstr ""
#~ "请摁上面列表中所示的按键，用 <空格> 或者“q”来退出帮助界面，\n"
#~ "或者用“.”(英文句点)来依次阅读帮助页面。"

#~ msgid "error reading keyboard in help"
#~ msgstr "在帮助界面读取键盘输入时出错"

#~ msgid "ioctl(TIOCGWINSZ) failed"
#~ msgstr "ioctl(TIOCGWINSZ) 失败"

#~ msgid "doupdate in SIGWINCH handler failed"
#~ msgstr "在 SIGWINCH 的处理函数里 doupdate 失败了"

#~ msgid "failed to restore old SIGWINCH sigact"
#~ msgstr "恢复原先的 SIGWINCH sigact 失败"

#~ msgid "failed to restore old signal mask"
#~ msgstr "恢复原先的 signal mask 失败"

#~ msgid "failed to get old signal mask"
#~ msgstr "获取原先的 signal mask 失败"

#~ msgid "failed to get old SIGWINCH sigact"
#~ msgstr "获取原先的 SIGWINCH sigact 出错"

#~ msgid "failed to block SIGWINCH"
#~ msgstr "无法阻塞 SIGWINCH 信号"

#~ msgid "failed to set new SIGWINCH sigact"
#~ msgstr "设置新的 SIGWINCH sigact 失败"

#~ msgid "failed to create title window"
#~ msgstr "创建标题窗口失败"

#~ msgid "failed to create whatinfo window"
#~ msgstr "创建 whatinfo 窗口失败"

#~ msgid "failed to create baselist pad"
#~ msgstr "无法新建基列表的小窗口"

#~ msgid "failed to create heading pad"
#~ msgstr "无法新建标题小窗口"

#~ msgid "failed to create thisstate pad"
#~ msgstr "无法新建 thisstate 小窗口"

#~ msgid "failed to create info pad"
#~ msgstr "无法新建相关信息小窗口"

#~ msgid "failed to create query window"
#~ msgstr "创建查询窗口失败"

#~ msgid ""
#~ "baselist::startdisplay() done ...\n"
#~ "\n"
#~ " xmax=%d, ymax=%d;\n"
#~ "\n"
#~ " title_height=%d, colheads_height=%d, list_height=%d;\n"
#~ " thisstate_height=%d, info_height=%d, whatinfo_height=%d;\n"
#~ "\n"
#~ " colheads_row=%d, thisstate_row=%d, info_row=%d;\n"
#~ " whatinfo_row=%d, list_row=%d;\n"
#~ "\n"
#~ msgstr ""
#~ "baselist::startdisplay() done ...\n"
#~ "\n"
#~ " xmax=%d, ymax=%d;\n"
#~ "\n"
#~ " title_height=%d, colheads_height=%d, list_height=%d;\n"
#~ " thisstate_height=%d, info_height=%d, whatinfo_height=%d;\n"
#~ "\n"
#~ " colheads_row=%d, thisstate_row=%d, info_row=%d;\n"
#~ " whatinfo_row=%d, list_row=%d;\n"
#~ "\n"

#~ msgid "keybindings"
#~ msgstr "键位绑定"

#~ msgid "  -- %d%%, press "
#~ msgstr "  -- %d%%，请摁 "

#~ msgid "%s for more"
#~ msgstr "%s 继续往下读"

#~ msgid "%s to go back"
#~ msgstr "%s 可以跳回原来的位置"

#~ msgid "[not bound]"
#~ msgstr "[未绑定]"

#~ msgid "[unk: %d]"
#~ msgstr "[未知：%d]"

#~ msgid "Scroll onwards through help/information"
#~ msgstr "在帮助文档或相关信息中向前滚动"

#~ msgid "Scroll backwards through help/information"
#~ msgstr "在帮助或相关信息中向前滚动"

#~ msgid "Move up"
#~ msgstr "上移"

#~ msgid "Move down"
#~ msgstr "下移"

#~ msgid "Go to top of list"
#~ msgstr "跳到顶端列表"

#~ msgid "Go to end of list"
#~ msgstr "跳到底端列表"

#~ msgid "Request help (cycle through help screens)"
#~ msgstr "请求帮助(在帮助界面周游)"

#~ msgid "Cycle through information displays"
#~ msgstr "在相关信息界面里周游"

#~ msgid "Redraw display"
#~ msgstr "重画屏幕"

#~ msgid "Scroll onwards through list by 1 line"
#~ msgstr "在列表中向前滚动一行"

#~ msgid "Scroll backwards through list by 1 line"
#~ msgstr "在列表中向后滚动一行"

#~ msgid "Scroll onwards through help/information by 1 line"
#~ msgstr "在帮助或相关信息中向前滚动一行"

#~ msgid "Scroll backwards through help/information by 1 line"
#~ msgstr "在帮助或相关信息中向后滚动一行"

#~ msgid "Scroll onwards through list"
#~ msgstr "在列表中向前滚动"

#~ msgid "Scroll backwards through list"
#~ msgstr "在列表中向前滚动"

#~ msgid "Mark package(s) for installation"
#~ msgstr "把软件包标记为“将要安装”"

#~ msgid "Mark package(s) for deinstallation"
#~ msgstr "把软件包标记为“将要卸载”"

#~ msgid "Mark package(s) for deinstall and purge"
#~ msgstr "把软件包标记为“卸载并清除”"

#~ msgid "Make highlight more specific"
#~ msgstr "让高亮显示更有针对性"

#~ msgid "Make highlight less specific"
#~ msgstr "让高亮显示更没有针对性"

#~ msgid "Search for a package whose name contains a string"
#~ msgstr "搜索软件包名字含有特定字符串的软件包"

#~ msgid "Repeat last search."
#~ msgstr "重复上次的搜索。"

#~ msgid "Swap sort order priority/section"
#~ msgstr "调整排序的依据 - 优先级/所属大类"

#~ msgid "Quit, confirming, and checking dependencies"
#~ msgstr "退出，并确认操作而且对依赖问题进行复查"

#~ msgid "Quit, confirming without check"
#~ msgstr "退出，并确认操作而且不再检查"

#~ msgid "Quit, rejecting conflict/dependency suggestions"
#~ msgstr "退出，并拒绝有关冲突和依赖问题的建议"

#~ msgid "Abort - quit without making changes"
#~ msgstr "中止操作 - 不作任何更改并退出"

#~ msgid "Revert to old state for all packages"
#~ msgstr "把所有软件包的状态恢复到修改前"

#~ msgid "Revert to suggested state for all packages"
#~ msgstr "把所有软件包的状态恢复到建议值"

#~ msgid "Revert to directly requested state for all packages"
#~ msgstr "把所有软件包的状态恢复到所要求的值"

#~ msgid "Select currently-highlighted access method"
#~ msgstr "选中当前高亮显示的安装手段"

#~ msgid "Quit without changing selected access method"
#~ msgstr "退出程序，而且不修改所选的安装手段"

#~ msgid "Keystrokes"
#~ msgstr "按键操作"

#~ msgid ""
#~ "Motion keys: Next/Previous, Top/End, Up/Down, Backwards/Forwards:\n"
#~ "  Down-arrow, j         Up-arrow, k             move highlight\n"
#~ "  N, Page-down, Space   P, Page-up, Backspace   scroll list by 1 page\n"
#~ "  ^n                    ^p                      scroll list by 1 line\n"
#~ "  t, Home               e, End                  jump to top/end of list\n"
#~ "  u                     d                       scroll info by 1 page\n"
#~ "  ^u                    ^d                      scroll info by 1 line\n"
#~ "  B, Left-arrow         F, Right-arrow          pan display by 1/3 "
#~ "screen\n"
#~ "  ^b                    ^f                      pan display by 1 "
#~ "character\n"
#~ "\n"
#~ "Mark packages for later processing:\n"
#~ " +, Insert  install or upgrade      =, H  hold in present state\n"
#~ " -, Delete  remove                  :, G  unhold: upgrade or leave "
#~ "uninstalled\n"
#~ " _          remove & purge config\n"
#~ "                                             Miscellaneous:\n"
#~ "Quit, exit, overwrite (note capitals!):       ?, F1 request help (also "
#~ "Help)\n"
#~ " Return  Confirm, quit (check dependencies)   i, I  toggle/cycle info "
#~ "displays\n"
#~ "   Q     Confirm, quit (override dep.s)       o, O  cycle through sort "
#~ "options\n"
#~ " X, Esc  eXit, abandoning any changes made    v, V  change status display "
#~ "opts\n"
#~ "   R     Revert to state before this list      ^l   redraw display\n"
#~ "   U     set all to sUggested state             /   search (Return to "
#~ "cancel)\n"
#~ "   D     set all to Directly requested state  n, \\  repeat last search\n"
#~ msgstr ""
#~ "移动按键：下一个/前一个，顶端/底端，上移/下移，后移/前移：\n"
#~ "  n，下箭头             p，上箭头               移动高亮所在的条目\n"
#~ "  N，Page-down，空格    P，Page-up，Backspace   让列表滚动一页\n"
#~ "  ^n                    ^p                      让列表滚动一行\n"
#~ "  t，Home               e，End                  跳到列表的顶端/底端\n"
#~ "  u                     d                       让相关信息滚动一页\n"
#~ "  ^u                    ^d                      让相关信息滚动一行\n"
#~ "  B，左箭头             F，右箭头               让显示内容左右平移 1/3 屏"
#~ "幕宽度\n"
#~ "  ^b                    ^f                      让显示内容左右平移一个字符"
#~ "宽度\n"
#~ "\n"
#~ "为软件包作上标记，待之后再作处理：\n"
#~ " +，Insert   安装或者升级           =，H  令其保持当前状态\n"
#~ " - ，Delete  卸载                   :, G  取消保持：升级或者仍然不安装\n"
#~ " _           删除并清除配置\n"
#~ "                                             其它：\n"
#~ "退出，改动状态(注意，都是大写！)：            ?, F1     请求帮助\n"
#~ "  回车    确认并退出(复查依赖问题)            i, I      切换或滚动相关信息"
#~ "的显示\n"
#~ "   Q     确认并退出(忽略依赖问题)             o, O      滚动排序的各个选"
#~ "项\n"
#~ " X, Esc  退出程序，把之前的改动作废           v, V      修改状态显示的选"
#~ "项\n"
#~ "   R     把所有软件包的状态恢复到修改前       ^l        重画屏幕\n"
#~ "   U     把所有软件包的状态改成建议值         /         搜索 (用回车取消搜"
#~ "索)\n"
#~ "   D     把所有软件包的状态改成到所要求的值   \\        重复上次的搜索\n"

#~ msgid "Introduction to package selections"
#~ msgstr "软件包自选界面简介"

#~ msgid ""
#~ "Welcome to dselect's main package listing.\n"
#~ "\n"
#~ "You will be presented with a list of packages which are installed or "
#~ "available\n"
#~ "for installation.  You can navigate around the list using the cursor "
#~ "keys,\n"
#~ "mark packages for installation (using `+') or deinstallation (using "
#~ "`-').\n"
#~ "Packages can be marked either singly or in groups; initially you will see "
#~ "that\n"
#~ "the line `All packages' is selected.  `+', `-' and so on will affect all "
#~ "the\n"
#~ "packages described by the highlighted line.\n"
#~ "\n"
#~ "Some of your choices will cause conflicts or dependency problems; you "
#~ "will be\n"
#~ "given a sub-list of the relevant packages, so that you can solve the "
#~ "problems.\n"
#~ "\n"
#~ "You should read the list of keys and the explanations of the display.\n"
#~ "Much on-line help is available, please make use of it - press `?' at\n"
#~ "any time for help.\n"
#~ "\n"
#~ "When you have finished selecting packages, press <enter> to confirm "
#~ "changes,\n"
#~ "or `X' to quit without saving changes. A final check on conflicts and\n"
#~ "dependencies will be done - here too you may see a sublist.\n"
#~ "\n"
#~ "Press <space> to leave help and enter the list now.\n"
#~ msgstr ""
#~ "欢迎来到 dselect 的软件包主列表界面。\n"
#~ "\n"
#~ "展现在您面前的是已经安装的或可以安装的软件包列表。\n"
#~ "您若要想安装的话，可以使用方向键在这个列表中浏览，\n"
#~ "为要安装的软件包作上记号(用“+”)，也可以为希望卸载\n"
#~ "的软件包作记号(用“-”)。\n"
#~ "作记号时，不仅可以对单个软件包作记号，还可以为成组\n"
#~ "的软件包作记号。刚开始时您会看到“所有软件包”一行被\n"
#~ "选中了，那么用“+”和“-”等键就可以操控被高亮显示的行\n"
#~ "所指代的所有软件包。\n"
#~ "\n"
#~ "您作的一些选择可能会导致软件包间出现一些的冲突或依赖\n"
#~ "问题，这时程序会向您提交一份相关软件的子列表，这样，\n"
#~ "您就能解决该问题。\n"
#~ "\n"
#~ "您应当看看按键的列表，以及有关屏幕上显示信息的说明。\n"
#~ "还有许多在线的帮助文档，只要在需要帮助的时候摁“?”\n"
#~ "就可调阅它们。\n"
#~ "\n"
#~ "一旦您选完软件包，请摁 <回车> 键来确认刚才的修改，\n"
#~ "或者用“X”退出且不保存修改内容。在这时，程序会最后\n"
#~ "作一次冲突和依赖性检查……对了，您在这里可能还会看\n"
#~ "一次相关软件的子列表。\n"
#~ "\n"
#~ "现在您可以通过摁 <空格> 键离开本帮助，进入列表界面了。\n"

#~ msgid "Introduction to read-only package list browser"
#~ msgstr "只读软件包列表浏览界面简介"

#~ msgid ""
#~ "Welcome to dselect's main package listing.\n"
#~ "\n"
#~ "You will be presented with a list of packages which are installed or "
#~ "available\n"
#~ "for installation.  Since you do not have the privilege necessary to "
#~ "update\n"
#~ "package states, you are in a read-only mode.  You can navigate around "
#~ "the\n"
#~ "list using the cursor keys (please see the `Keystrokes' help screen), "
#~ "observe\n"
#~ "the status of the packages and read information about them.\n"
#~ "\n"
#~ "You should read the list of keys and the explanations of the display.\n"
#~ "Much on-line help is available, please make use of it - press `?' at\n"
#~ "any time for help.\n"
#~ "\n"
#~ "When you have finished browsing, press `Q' or <enter> to quit.\n"
#~ "\n"
#~ "Press <space> to leave help and enter the list now.\n"
#~ msgstr ""
#~ "欢迎来到 dselect 的软件包主列表界面。\n"
#~ "\n"
#~ "展现在您面前的是已经安装的或可以安装的软件包列表。\n"
#~ "由于您没有权限修改软件包的状态，就只能以只读模式操\n"
#~ "作了。您可以使用方向键在本列表中移动(请参考帮助界\n"
#~ "面中的“按键操作”一节)，并查看软件包的状态以及获得\n"
#~ "软件包的相关信息。\n"
#~ "\n"
#~ "您应当看看按键的列表，以及有关屏幕上显示信息的解释。\n"
#~ "还有许多在线的帮助文档，只要在需要帮助的时候摁“?”\n"
#~ "就可调阅它们。\n"
#~ "\n"
#~ "您看完后，请摁“Q”或者 <回车> 键来退出软件。\n"
#~ "\n"
#~ "现在您可以通过摁 <空格> 键离开帮助系统并进入列表界面了。\n"

#~ msgid "Introduction to conflict/dependency resolution sub-list"
#~ msgstr "用于解决冲突/依赖问题的子列表的简介"

#~ msgid ""
#~ "Dependency/conflict resolution - introduction.\n"
#~ "\n"
#~ "One or more of your choices have raised a conflict or dependency problem "
#~ "-\n"
#~ "some packages should only be installed in conjunction with certain "
#~ "others, and\n"
#~ "some combinations of packages may not be installed together.\n"
#~ "\n"
#~ "You will see a sub-list containing the packages involved.  The bottom "
#~ "half of\n"
#~ "the display shows relevant conflicts and dependencies; use `i' to cycle "
#~ "between\n"
#~ "that, the package descriptions and the internal control information.\n"
#~ "\n"
#~ "A set of `suggested' packages has been calculated, and the initial "
#~ "markings in\n"
#~ "this sub-list have been set to match those, so you can just hit Return "
#~ "to\n"
#~ "accept the suggestions if you wish.  You may abort the change(s) which "
#~ "caused\n"
#~ "the problem(s), and go back to the main list, by pressing capital `X'.\n"
#~ "\n"
#~ "You can also move around the list and change the markings so that they "
#~ "are more\n"
#~ "like what you want, and you can `reject' my suggestions by using the "
#~ "capital\n"
#~ "`D' or `R' keys (see the keybindings help screen).  You can use capital "
#~ "`Q' to\n"
#~ "force me to accept the situation currently displayed, in case you want "
#~ "to\n"
#~ "override a recommendation or think that the program is mistaken.\n"
#~ "\n"
#~ "Press <space> to leave help and enter the sub-list; remember: press `?' "
#~ "for help.\n"
#~ msgstr ""
#~ "依赖/冲突问题的解决办法 - 简介。\n"
#~ "\n"
#~ "您所作的选择中有些引起了冲突或依赖问题，即，\n"
#~ "有些软件包必须与某些其它软件包一同安装，\n"
#~ "而有的软件包的特定组合是不能同时安装的。\n"
#~ "\n"
#~ "您将会见到一个子列表，它包含了被波及到的\n"
#~ "软件包。屏幕显示的下半部分会告诉您相关\n"
#~ "的冲突和依赖关系。请使用“i”来浏览软件包\n"
#~ "的简介和内部控制信息。\n"
#~ "\n"
#~ "这里已经分析并“建议”了一组软件包，并且\n"
#~ "本子列表中的软件包的初始状态都已经被标记为\n"
#~ "对应的“建议”状态。这样，如果您愿意的话，\n"
#~ "只需摁一下回车来接受该建议。您也可以摁大写\n"
#~ "的“X”来取消这个导致问题的更改，并回到主\n"
#~ "列表界面。\n"
#~ "\n"
#~ "您也可以按照自己的需求修改列表中软件包\n"
#~ "的状态。同时，您也可以摁大写的“D”或“R”\n"
#~ "键(参考按键绑定的帮助界面)，来“拒绝”我\n"
#~ "提出的建议。当您希望忽略我的建议或是认为\n"
#~ "本软件出错时，您还可以摁大写的“Q”来强制\n"
#~ "我接受当前显示的设定。\n"
#~ "\n"
#~ "请摁 <空格> 离开帮助系统并进入子列表。\n"
#~ "请记住：需要帮助时，摁“?”键。\n"

#~ msgid "Display, part 1: package listing and status chars"
#~ msgstr "显示部位 1：软件包列表及状态简写"

#~ msgid ""
#~ "The top half of the screen shows a list of packages.  For each package "
#~ "you see\n"
#~ "four columns for its current status on the system and mark.  In terse "
#~ "mode (use\n"
#~ "`v' to toggle verbose display) these are single characters, from left to "
#~ "right:\n"
#~ "\n"
#~ " Error flag: Space - no error (but package may be in broken state - see "
#~ "below)\n"
#~ "              `R'  - serious error during installation, needs "
#~ "reinstallation;\n"
#~ " Installed state:   Space - not installed;\n"
#~ "                     `*'  - installed;\n"
#~ "                     `-'  - not installed but config files remain;\n"
#~ "       packages in { `U'  - unpacked but not yet configured;\n"
#~ "      these states { `C'  - half-configured (an error happened);\n"
#~ "        are broken { `I'  - half-installed (an error happened).\n"
#~ " Old mark: what was requested for this package before presenting this "
#~ "list;\n"
#~ " Mark: what is requested for this package:\n"
#~ "  `*': marked for installation or upgrade;\n"
#~ "  `-': marked for removal, but any configuration files will remain;\n"
#~ "  `=': on hold: package will not be processed at all;\n"
#~ "  `_': marked for purge completely - even remove configuration;\n"
#~ "  `n': package is new and has yet to be marked for install/remove/&c.\n"
#~ "\n"
#~ "Also displayed are each package's Priority, Section, name, installed and\n"
#~ "available version numbers (shift-V to display/hide) and summary "
#~ "description.\n"
#~ msgstr ""
#~ "屏幕的上半部分显示的是软件包的列表。对每个软件包来说，\n"
#~ "都有四列代号表示该软件包在系统中的状态以及现在被作的标记。\n"
#~ "在简略模式里(可用“v”来切换到详尽模式)它们都是单个的字母，\n"
#~ "从左到右分别是：\n"
#~ "\n"
#~ "错误标志：空白，即没有错误(但是软件包可能有故障，见下)\n"
#~ "               “R”，  即在安装过程遭遇了严重错误，需要重新安装；\n"
#~ "安装状态：空白，即没有安装；\n"
#~ "               “*”，  即已安装；\n"
#~ "               “-”，  即没有安装，但是残留有其配置文件；\n"
#~ "     处于这些状态    { “U”，即已解压缩但还未进行配置；\n"
#~ "          的软件包  { “C”，即不完全配置(其间有错误发生)；\n"
#~ "     都是有故障的    { “I”，即部分安装(其间有错误发生)。\n"
#~ "原有标记：列表显示出来之前软件包就被要求设置的成状态；\n"
#~ "当前标记：现在软件包被要求设置的成状态：\n"
#~ "  “*”：将其标记为安装或升级；\n"
#~ "  “-”：将其标记为删除，但是将保留它的配置文件；\n"
#~ "  “=”：维持原状：软件包将不动分毫；\n"
#~ "  “_”：将其标记为完全清除，连同配置一起删除；\n"
#~ "  “n”：软件包是新的，尚未标记过。\n"
#~ "\n"
#~ "另外界面上还显示有软件包的优先级、所属大类、名称、已安装\n"
#~ "的版本号和当前可用的版本号(使用 shift-v 可以开启或关闭其\n"
#~ "显示)，以及简要的介绍。\n"

#~ msgid "Display, part 2: list highlight; information display"
#~ msgstr "显示部位 2：列表高亮部分；相关信息的显示"

#~ msgid ""
#~ "* Highlight: One line in the package list will be highlighted.  It "
#~ "indicates\n"
#~ "  which package(s) will be affected by presses of `+', `-' and `_'.\n"
#~ "\n"
#~ "* The dividing line in the middle of the screen shows a brief explanation "
#~ "of\n"
#~ "  the status of the currently-highlighted package, or a description of "
#~ "which\n"
#~ "  group is highlighted if a group line is.  If you don't understand the\n"
#~ "  meaning of some of the status characters displayed, go to the relevant\n"
#~ "  package and look at this divider line, or use the `v' key for a "
#~ "verbose\n"
#~ "  display (press `v' again to go back to the terse display).\n"
#~ "\n"
#~ "* The bottom of the screen shows more information about the\n"
#~ "  currently-highlighted package (if there is only one).\n"
#~ "\n"
#~ "  It can show an extended description of the package, the internal "
#~ "package\n"
#~ "  control details (either for the installed or available version of the\n"
#~ "  package), or information about conflicts and dependencies involving "
#~ "the\n"
#~ "  current package (in conflict/dependency resolution sublists).\n"
#~ "\n"
#~ "  Use the `i' key to cycle through the displays, and `I' to hide the\n"
#~ "  information display or expand it to use almost all of the screen.\n"
#~ msgstr ""
#~ "* 高亮：软件包列表中被高亮显示的那一行。它所在的行的\n"
#~ "  软件包将会被“+”、“-”和“_”的按键操控。\n"
#~ "\n"
#~ "* 在屏幕中间的分隔条概括了当前高亮的(一组)软件包的状态。\n"
#~ "  如果您不了解左侧状态代号的意思，请移动到相应的软件包，\n"
#~ "  再查看分隔条，或者使用“v”键来调阅较详细的显示(再摁一次\n"
#~ "  就可以回到简略的显示模式)。\n"
#~ "\n"
#~ "* 屏幕底部显示的是当前高亮的软件包(如果只有一个)的更多\n"
#~ "  信息。\n"
#~ "  \n"
#~ "  它会显示关于该软件包的补充信息、软件包内部的控制细节\n"
#~ "  (不管是已经安装的还是尚未安装的版本)、若是与当前软件包\n"
#~ "  (出现在冲突/依赖问题解决办法子列表)有关的冲突和依赖问题。\n"
#~ "\n"
#~ "  您可以用“i”键在这些显示内容中来回切换，用“I”来关闭相关信息\n"
#~ "  的显示，或者扩大它在屏幕中所占的幅面直到几乎完全占据屏幕。\n"

#~ msgid "Introduction to method selection display"
#~ msgstr "安装手段选择界面的简介"

#~ msgid ""
#~ "dselect and dpkg can do automatic installation, loading the package files "
#~ "to be\n"
#~ "installed from one of a number of different possible places.\n"
#~ "\n"
#~ "This list allows you to select one of these installation methods.\n"
#~ "\n"
#~ "Move the highlight to the method you wish to use, and hit Enter.  You "
#~ "will then\n"
#~ "be prompted for the information required to do the installation.\n"
#~ "\n"
#~ "As you move the highlight a description of each method, where available, "
#~ "is\n"
#~ "displayed in the bottom half of the screen.\n"
#~ "\n"
#~ "If you wish to quit without changing anything use the `x' key while in "
#~ "the list\n"
#~ "of installation methods.\n"
#~ "\n"
#~ "A full list of keystrokes is available by pressing `k' now, or from the "
#~ "help\n"
#~ "menu reachable by pressing `?'.\n"
#~ msgstr ""
#~ "dselect 和 dpkg 能够实现自动化的安装，它们可以从多个不同的地址取回\n"
#~ "要安装的软件包文件。\n"
#~ "\n"
#~ "本列表可以让您从这些安装手段中选择一个。\n"
#~ "\n"
#~ "请移动高亮条到您希望使用的安装手段，再摁回车。然后软件会提示您输入\n"
#~ "这种安装手段所必须的一些相关信息。\n"
#~ "\n"
#~ "如果您想要退出程序，而且不做任何变动，那么请在安装手段列表的界面中\n"
#~ "使用“x”键。\n"
#~ "\n"
#~ "现在摁“k”键就能见到按键操作的完整列表，也可以在帮助菜单中摁“k”键。\n"
#~ "摁“?”就能呼出帮助菜单。\n"

#~ msgid "Keystrokes for method selection"
#~ msgstr "选择安装手段的按键操作"

#~ msgid ""
#~ "Motion keys: Next/Previous, Top/End, Up/Down, Backwards/Forwards:\n"
#~ "  n, Down-arrow         p, Up-arrow             move highlight\n"
#~ "  N, Page-down, Space   P, Page-up, Backspace   scroll list by 1 page\n"
#~ "  ^n                    ^p                      scroll list by 1 line\n"
#~ "  t, Home               e, End                  jump to top/end of list\n"
#~ "  u                     d                       scroll info by 1 page\n"
#~ "  ^u                    ^d                      scroll info by 1 line\n"
#~ "  B, Left-arrow         F, Right-arrow          pan display by 1/3 "
#~ "screen\n"
#~ "  ^b                    ^f                      pan display by 1 "
#~ "character\n"
#~ "(These are the same motion keys as in the package list display.)\n"
#~ "\n"
#~ "Quit:\n"
#~ " Return, Enter    select this method and go to its configuration "
#~ "dialogue\n"
#~ " x, X             exit without changing or setting up the installation "
#~ "method\n"
#~ "\n"
#~ "Miscellaneous:\n"
#~ "  ?, Help, F1      request help\n"
#~ " ^l                redraw display\n"
#~ "  /                search (just return to cancel)\n"
#~ "  \\                repeat last search\n"
#~ msgstr ""
#~ "移动按键：下一个/前一个，顶端/底端，上移/下移，后移/前移：\n"
#~ "  n，下箭头             p，上箭头               移动高亮所在的条目\n"
#~ "  N，Page-down，空格    P，Page-up，Backspace   让列表滚动一页\n"
#~ "  ^n                    ^p                      让列表滚动一行\n"
#~ "  t，Home               e，End                  跳到列表的顶端/底端\n"
#~ "  u                     d                       让相关信息滚动一页\n"
#~ "  ^u                    ^d                      让相关信息滚动一行\n"
#~ "  B，左箭头             F，右箭头               让显示内容左右平移 1/3 的"
#~ "屏幕宽度\n"
#~ "  ^b                    ^f                      让显示内容左右平移一个字符"
#~ "宽度\n"
#~ "(在软件包列表界面也使用同样的按键设置。)\n"
#~ "\n"
#~ "退出：\n"
#~ " 回车             选中该安装手段，并进入其设置界面\n"
#~ " x，X             退出，而且不对安装手段作任何更改或设置\n"
#~ "\n"
#~ "其它：\n"
#~ "  ?, Help, F1      请求帮助\n"
#~ " ^l                重画屏幕\n"
#~ "  /                进行搜索(摁回车取消搜索)\n"
#~ "  \\               重复上次的搜索\n"

#~ msgid "Type dselect --help for help."
#~ msgstr "输入 dselect --help 就可以阅读帮助信息。"

#~ msgid "a"
#~ msgstr "a"

#~ msgid "[A]ccess"
#~ msgstr "来源[A]"

#~ msgid "Choose the access method to use."
#~ msgstr "选择所使用的安装来源。"

#~ msgid "u"
#~ msgstr "u"

#~ msgid "[U]pdate"
#~ msgstr "更新[U]"

#~ msgid "Update list of available packages, if possible."
#~ msgstr "如果可能的话，更新可用的软件包列表。"

#~ msgid "s"
#~ msgstr "s"

#~ msgid "[S]elect"
#~ msgstr "选择[S]"

#~ msgid "Request which packages you want on your system."
#~ msgstr "对系统中安装的软件包进行取舍。"

#~ msgid "i"
#~ msgstr "i"

#~ msgid "[I]nstall"
#~ msgstr "安装[I]"

#~ msgid "Install and upgrade wanted packages."
#~ msgstr "安装并升级之前指定的软件包。"

#~ msgid "c"
#~ msgstr "c"

#~ msgid "[C]onfig"
#~ msgstr "配置[C]"

#~ msgid "Configure any packages that are unconfigured."
#~ msgstr "对所有还未配置的软件包进行配置"

#~ msgid "r"
#~ msgstr "r"

#~ msgid "[R]emove"
#~ msgstr "删除[R]"

#~ msgid "Remove unwanted software."
#~ msgstr "删除不需要的软件包"

#~ msgid "q"
#~ msgstr "q"

#~ msgid "[Q]uit"
#~ msgstr "退出[Q]"

#~ msgid "Quit dselect."
#~ msgstr "退出 dselect 程序"

#~ msgid "menu"
#~ msgstr "菜单"

#~ msgid "Debian `%s' package handling frontend version %s.\n"
#~ msgstr "Debian “%s” 软件包操作前端"

#~ msgid "Screenparts:\n"
#~ msgstr "显示部位：\n"

#~ msgid "Colours:\n"
#~ msgstr "颜色：\n"

#~ msgid "Attributes:\n"
#~ msgstr "属性：\n"

#~ msgid "Invalid %s `%s'\n"
#~ msgstr "无效的 %s “%s”\n"

#~ msgid "screen part"
#~ msgstr "显示部分"

#~ msgid "Null colour specification\n"
#~ msgstr "未指定颜色\n"

#~ msgid "colour"
#~ msgstr "颜色"

#~ msgid "colour attribute"
#~ msgstr "颜色属性"

#~ msgid "Terminal does not appear to support cursor addressing.\n"
#~ msgstr "终端不支持游标的定位。\n"

#~ msgid "Terminal does not appear to support highlighting.\n"
#~ msgstr "终端不支持高亮显示。\n"

#~ msgid ""
#~ "Set your TERM variable correctly, use a better terminal,\n"
#~ "or make do with the per-package management tool %s.\n"
#~ msgstr ""
#~ "请正确设置您的 TERM 变量，用一个更合适的终端类型，\n"
#~ "或者转用针对单个软件包的包管理工具，即 "

#~ msgid "terminal lacks necessary features, giving up"
#~ msgstr "由于终端缺乏必要的特性，只得中止操作"

#~ msgid ""
#~ "\n"
#~ "\n"
#~ "Move around with ^P and ^N, cursor keys, initial letters, or digits;\n"
#~ "Press <enter> to confirm selection.   ^L redraws screen.\n"
#~ "\n"
#~ msgstr ""
#~ "\n"
#~ "\n"
#~ "可以用 ^P 和 ^N、方向键、首字母或者数字键来移动游标；\n"
#~ "摁 <回车> 来确认。  用 ^L 来刷屏。\n"
#~ "\n"

#~ msgid ""
#~ "\n"
#~ "\n"
#~ "Read-only access: only preview of selections is available!"
#~ msgstr ""
#~ "\n"
#~ "\n"
#~ "只读访问：仅仅可以查看被选中的项目！"

#~ msgid "failed to getch in main menu"
#~ msgstr "在主菜单界面中 getch 失败"

#~ msgid "unknown action string `%.50s'"
#~ msgstr "不能识别的操作字串“%.50s”"

#~ msgid "dselect - list of access methods"
#~ msgstr "dselect - 安装手段的列表"

#~ msgid "Access method `%s'."
#~ msgstr "安装手段“%s”。"

#~ msgid "Abbrev."
#~ msgstr "缩写"

#~ msgid "failed to unblock SIGWINCH"
#~ msgstr "无法取消阻塞 SIGWINCH 信号"

#~ msgid "failed to re-block SIGWINCH"
#~ msgstr "重新阻塞 SIGWINCH 信号失败"

#~ msgid "getch failed"
#~ msgstr "getch 失败"

#~ msgid "[none]"
#~ msgstr "[无]"

#~ msgid "explanation of "
#~ msgstr "后面安装手段的说明"

#~ msgid "No explanation available."
#~ msgstr "没有发现相应的说明。"

#~ msgid ""
#~ "\n"
#~ "\n"
#~ "%s: %s\n"
#~ msgstr ""
#~ "\n"
#~ "\n"
#~ "%s：%s\n"

#~ msgid ""
#~ "\n"
#~ "Press <enter> to continue."
#~ msgstr ""
#~ "\n"
#~ "摁 <回车> 继续。"

#~ msgid "error un-catching signal %d: %s\n"
#~ msgstr "出错，有无法捕获的信号 %d：%s\n"

#~ msgid "unable to run %.250s process `%.250s'"
#~ msgstr "无法运行 %.250s 进程“%.250s”"

#~ msgid "unable to wait for %.250s"
#~ msgstr "无法等待子进程“%.250s”"

#~ msgid "got wrong child's status - asked for %ld, got %ld"
#~ msgstr "获得了其它子进程的状态 - 本想要 %ld 的，结果拿到了 %ld 的"

#~ msgid "was interrupted.\n"
#~ msgstr "被中断了。\n"

#~ msgid "was terminated by a signal: %s.\n"
#~ msgstr "被一个信号中断了：%s。\n"

#~ msgid "(It left a coredump.)\n"
#~ msgstr "(它 coredump 了。)\n"

#~ msgid "failed with an unknown wait return code %d.\n"
#~ msgstr "因为得到了一个不能识别的返回码 %d 而使操作失败。\n"

#~ msgid "Press <enter> to continue.\n"
#~ msgstr "请摁 <回车> 继续。\n"

#~ msgid "error reading acknowledgement of program failure message"
#~ msgstr "读取程序的错误提示时出错"

#~ msgid "update available list script"
#~ msgstr "更新可用软件包列表的脚本"

#~ msgid "query/setup script"
#~ msgstr "查询/设置脚本"

#~ msgid "unable to read `%.250s' directory for reading methods"
#~ msgstr "无法读取“%.250s”目录以获取安装手段的相关信息"

#~ msgid "method `%.250s' has name that is too long (%d > %d characters)"
#~ msgstr "安装手段“%.250s”的名字超长(%d > %d 个字符)"

#~ msgid "unable to access method script `%.250s'"
#~ msgstr "无法访问手段脚本“%.250s”"

#~ msgid "unable to read method options file `%.250s'"
#~ msgstr "无法读取手段脚本“%.250s”"

#~ msgid "non-digit where digit wanted"
#~ msgstr "在本该有数字的地方没有发现数字"

#~ msgid "EOF in index string"
#~ msgstr "在索引字串中发现了 EOF"

#~ msgid "index string too long"
#~ msgstr "索引字串超长"

#~ msgid "newline before option name start"
#~ msgstr "在选项名开始前就发现了换行符"

#~ msgid "EOF before option name start"
#~ msgstr "在选项名开始前就发现了 EOF"

#~ msgid "nonalpha where option name start wanted"
#~ msgstr "在本该是选项名开头的地方不是字母"

#~ msgid "non-alphanum in option name"
#~ msgstr "在选项名中发现了既不是字母也不是数字的字符"

#~ msgid "EOF in option name"
#~ msgstr "在选项名中发现了 EOF"

#~ msgid "newline before summary"
#~ msgstr "在概述前发现了换行符"

#~ msgid "EOF before summary"
#~ msgstr "在概述前发现了 EOF"

#~ msgid "EOF in summary - missing newline"
#~ msgstr "在概述中发现了 EOF - 本该是换行符的"

#~ msgid "unable to open option description file `%.250s'"
#~ msgstr "无法打开选项说明文件“%.250s”"

#~ msgid "unable to stat option description file `%.250s'"
#~ msgstr "无法 stat 选项说明文件“%.250s”"

#~ msgid "error during read of option description file `%.250s'"
#~ msgstr "读取选项说明文件“%.250s”时出错"

#~ msgid "error during read of method options file `%.250s'"
#~ msgstr "读取安装手段的选项文件“%.250s”时出错"

#~ msgid "unable to open new option file `%.250s'"
#~ msgstr "无法打开新的的选项文件“%.250s”"

#~ msgid "(no clientdata)"
#~ msgstr "(无客户端数据)"

#~ msgid "install"
#~ msgstr "安装"

#~ msgid "hold"
#~ msgstr "保持"

#~ msgid "remove"
#~ msgstr "删除"

#~ msgid "purge"
#~ msgstr "清除"

#~ msgid " "
#~ msgstr " "

#~ msgid "REINSTALL"
#~ msgstr "【重新安装】"

#~ msgid "unpacked (not set up)"
#~ msgstr "已解压缩(尚未设置)"

#~ msgid "failed config"
#~ msgstr "设置失败"

#~ msgid "half installed"
#~ msgstr "部分安装"

#~ msgid "removed (configs remain)"
#~ msgstr "删除(残存配置文件)"

#~ msgid "Required"
#~ msgstr "需要"

#~ msgid "Important"
#~ msgstr "重要"

#~ msgid "Standard"
#~ msgstr "标准"

#~ msgid "Recommended"
#~ msgstr "建议"

#~ msgid "Optional"
#~ msgstr "可选"

#~ msgid "Extra"
#~ msgstr "额外"

#~ msgid "Contrib"
#~ msgstr "贡献"

#~ msgid "!Bug!"
#~ msgstr "!瑕疵!"

#~ msgid "Unclassified"
#~ msgstr "未归类"

#~ msgid "suggests"
#~ msgstr "建议"

#~ msgid "recommends"
#~ msgstr "推荐"

#~ msgid "depends on"
#~ msgstr "依赖于"

#~ msgid "conflicts with"
#~ msgstr "与之冲突"

#~ msgid "provides"
#~ msgstr "提供"

#~ msgid "replaces"
#~ msgstr "替换"

#~ msgid "enhances"
#~ msgstr "有助于"

#~ msgid "Req"
#~ msgstr "需"

#~ msgid "Imp"
#~ msgstr "要"

#~ msgid "Std"
#~ msgstr "标"

#~ msgid "Rec"
#~ msgstr "荐"

#~ msgid "Opt"
#~ msgstr "选"

#~ msgid "Xtr"
#~ msgstr "余"

#~ msgid "Ctb"
#~ msgstr "献"

#~ msgid "bUG"
#~ msgstr "瑕"

#~ msgid "?"
#~ msgstr "?"

#~ msgid "Broken"
#~ msgstr "有故障"

#~ msgid "New"
#~ msgstr "新的"

#~ msgid "Updated"
#~ msgstr "有更新"

#~ msgid "Obsolete/local"
#~ msgstr "淘汰/本地"

#~ msgid "Up-to-date"
#~ msgstr "已更新"

#~ msgid "Available"
#~ msgstr "可用"

#~ msgid "Removed"
#~ msgstr "已删除"

#~ msgid "Brokenly installed packages"
#~ msgstr "有故障的已安装软件包"

#~ msgid "Newly available packages"
#~ msgstr "新的可用软件包"

#~ msgid "Updated packages (newer version is available)"
#~ msgstr "软件包有更新版本(有更高的版本可用了)"

#~ msgid "Obsolete and local packages present on system"
#~ msgstr "系统中安装这些的软件包是已淘汰的和本地的"

#~ msgid "Up to date installed packages"
#~ msgstr "安装了的软件包版本是最新的"

#~ msgid "Available packages (not currently installed)"
#~ msgstr "可用的软件包(目前没有被安装)"

#~ msgid "Removed and no longer available packages"
#~ msgstr "被删除而且不再可用的软件包"

#~ msgid "Installed packages"
#~ msgstr "已经安装的软件包"

#~ msgid "Removed packages (configuration still present)"
#~ msgstr "被删除的软件包 (其配置文件仍然存在于系统中)"

#~ msgid "Purged packages and those never installed"
#~ msgstr "被完全清除的软件包以及那些从未被安装过的软件包"

#~ msgid "Installed"
#~ msgstr "已安装"

#~ msgid "Purged"
#~ msgstr "已清除"

#~ msgid "dselect - recursive package listing"
#~ msgstr "dselect - 递归地列出软件包"

#~ msgid "dselect - inspection of package states"
#~ msgstr "dselect - 检视软件包的状态"

#~ msgid "dselect - main package listing"
#~ msgstr "dselect - 软件包主列表"

#~ msgid " (by section)"
#~ msgstr " (按所属大类)"

#~ msgid " (avail., section)"
#~ msgstr " (按是否可用和所属大类)"

#~ msgid " (status, section)"
#~ msgstr " (按状态和所属大类)"

#~ msgid " (avail., priority)"
#~ msgstr " (按是否可用和优先级)"

#~ msgid " (status, priority)"
#~ msgstr " (按状态和优先级)"

#~ msgid " (alphabetically)"
#~ msgstr " (按字母表顺序)"

#~ msgid " (by availability)"
#~ msgstr " (按是否可用)"

#~ msgid " mark:+/=/- terse:v help:?"
#~ msgstr " 标记:+/=/- 简略:v 帮助:?"

#~ msgid " mark:+/=/- verbose:v help:?"
#~ msgstr " 标记:+/=/- 详尽:v 帮助:?"

#~ msgid " terse:v help:?"
#~ msgstr " 简略:v 帮助:?"

#~ msgid " verbose:v help:?"
#~ msgstr " 详尽:v 帮助:?"

#~ msgid ""
#~ "The line you have highlighted represents many packages; if you ask to "
#~ "install, remove, hold, etc. it you will affect all the packages which "
#~ "match the criterion shown.\n"
#~ "\n"
#~ "If you move the highlight to a line for a particular package you will see "
#~ "information about that package displayed here.\n"
#~ "You can use `o' and `O' to change the sort order and give yourself the "
#~ "opportunity to mark packages in different kinds of groups."
#~ msgstr ""
#~ "您现在高亮显示的行代表着多个软件包。如果您要求安装、删除、保持等等，您将"
#~ "会\n"
#~ "影响到符合所示标准的所有软件包。\n"
#~ "\n"
#~ "如果您移动高亮条到单个软件包所在的行上，您将会看到这里显示的是该软件包的"
#~ "相\n"
#~ "关信息。\n"
#~ "您可以摁“o”或者“O”来以不同的规则排序，这样您就能给不同类型的软件包作上\n"
#~ "标记了。"

#~ msgid "interrelationships affecting "
#~ msgstr "软件包的相互关系问题牵连到了"

#~ msgid "interrelationships"
#~ msgstr "软件包的相互关系"

#~ msgid "description of "
#~ msgstr "下面软件包的介绍"

#~ msgid "description"
#~ msgstr "介绍"

#~ msgid "currently installed control info"
#~ msgstr "当前安装的控制信息"

#~ msgid "installed control info for "
#~ msgstr "为下面软件包安装的控制信息"

#~ msgid "available version of control file info"
#~ msgstr "可用的控制信息的版本"

#~ msgid "available version of control info for "
#~ msgstr "下面软件包的可用控制信息的版本"

#~ msgid "<null>"
#~ msgstr "<无>"

#~ msgid "invalid search option given"
#~ msgstr "指定了无效的搜索选项"

#~ msgid "error in regular expression"
#~ msgstr "正则表达式有误"

#~ msgid " does not appear to be available\n"
#~ msgstr " 看上去应该不可用\n"

#~ msgid " or "
#~ msgstr " 或者 "

#~ msgid "All"
#~ msgstr "所有"

#~ msgid "All packages"
#~ msgstr "所有软件包"

#~ msgid "%s packages without a section"
#~ msgstr "不指定大类 %s 软件包"

#~ msgid "%s %s packages"
#~ msgstr "%s %s 软件包"

#~ msgid "%s %s packages without a section"
#~ msgstr "不指定大类 %s %s 软件包"

#~ msgid "%s %s packages in section %s"
#~ msgstr "在 %3$s 大类中 %1$s %2$s 软件包"

#~ msgid "%-*s %s%s%s;  %s (was: %s).  %s"
#~ msgstr "%-*s %s%s%s;  %s (曾为：%s).  %s"

#~ msgid "Error"
#~ msgstr "错误"

#~ msgid "Installed?"
#~ msgstr "已安装？"

#~ msgid "Old mark"
#~ msgstr "原有标记"

#~ msgid "Marked for"
#~ msgstr "现标记为"

#~ msgid "EIOM"
#~ msgstr "EIOM"

#~ msgid "Package"
#~ msgstr "软件包名"

#~ msgid "Inst.ver"
#~ msgstr "安装版本"

#~ msgid "Avail.ver"
#~ msgstr "可用版本"

#~ msgid "failed to rmdir/unlink `%.255s'"
#~ msgstr "无法 rmdir/unlink “%.255s”"

#~ msgid "Debian GNU/Linux `"
#~ msgstr "Debian GNU/Linux “"

#~ msgid " --licence for copyright and license details.\n"
#~ msgstr " --licence 来查看版权和许可证的细节。\n"

#~ msgid "Debian `"
#~ msgstr "Debian “"

#~ msgid "Usage: "
#~ msgstr "用法："

#~ msgid ""
#~ "Version %s.\n"
#~ "Copyright (C) 1994-1996 Ian Jackson.\n"
#~ "Copyright (C) 2000,2001 Wichert Akkerman.\n"
#~ "This is free software; see the GNU General Public Licence version 2\n"
#~ "or later for copying conditions.  There is NO warranty.  See\n"
#~ "dselect --licence for details.\n"
#~ msgstr ""
#~ "版本 %s。\n"
#~ "版权所有(C) 1994-1996 Ian Jackson。\n"
#~ "版权所有(C) 2000,2001 Wichert Akkerman。\n"
#~ "这是自由软件；要获知复制该软件的前提和条件，请参阅 GNU 公共许可证的\n"
#~ "第二版或其更新的版本。该软件【不】提供任何担保。请通过执行\n"
#~ "dselect --licence 查看详细的说明。\n"

#~ msgid ""
#~ "Usage: dselect [options]\n"
#~ "       dselect [options] action ...\n"
#~ "Options:  --admindir <directory>  (default is /var/lib/dpkg)\n"
#~ "          --help  --version  --licence  --expert  --debug <file> | -"
#~ "D<file>\n"
#~ "          --colour screenpart:[foreground],[background][:attr[+attr+..]]\n"
#~ "Actions:  access update select install config remove quit\n"
#~ msgstr ""
#~ "用法：dselect [选项]\n"
#~ "      dselect [选项] 操作 ...\n"
#~ "选项： --admindir <目录名>  (默认值是 /var/lib/dpkg)\n"
#~ "       --help  --version  --licence  --expert  --debug <文件名> | -D<文件"
#~ "名>\n"
#~ "       --colour screenpart:[前景色],[背景色][:属性[+属性+..]]\n"
#~ "操作： access update select install config remove quit\n"

#~ msgid ""
#~ "Copyright (C) 1994-1996 Ian Jackson.  This is free software; see the\n"
#~ "GNU General Public Licence version 2 or later for copying conditions.\n"
#~ "There is NO warranty.  See dpkg-split --licence for details.\n"
#~ msgstr ""
#~ "版权所有 (C) 1994-1996 Ian Jackson。这是自由软件；要获知复制该\n"
#~ "软件的前提和条件，请参阅 GNU 公共许可证的第二版或其更新的版本。\n"
#~ "该软件【不】提供任何担保。请执行 dpkg-split --licence 以查看详细的说明。\n"

#~ msgid "Type md5sum --help for help."
#~ msgstr "输入 md5sum --help 就可以阅读帮助信息。"

#~ msgid ""
#~ "usage: md5sum [-bv] [-c [file]] | [file...]\n"
#~ "Generates or checks MD5 Message Digests\n"
#~ "    -c  check message digests (default is generate)\n"
#~ "    -v  verbose, print file names when checking\n"
#~ "    -b  read files in binary mode\n"
#~ "The input for -c should be the list of message digests and file names\n"
#~ "that is printed on stdout by this program when it generates digests.\n"
#~ msgstr ""
#~ "用法：md5sum [-bv] [-c [文件]] | [文件...]\n"
#~ "生成或者检验 MD5 校验和(Message Digests)\n"
#~ "    -c  检验校验和(默认是生成校验和)\n"
#~ "    -v  详细输出，当检验时打印出相应的文件名\n"
#~ "    -b  以二进制模式读取文件\n"
#~ "-c 的输入项必须是校验和和文件名的一个列表，\n"
#~ "本软件会在生成校验和时把该列表打印到标准输出上的。\n"

#~ msgid "mdfile"
#~ msgstr "mdfile"

#~ msgid "%s: unrecognized line\n"
#~ msgstr "%s：无法识别的行\n"

#~ msgid "FAILED\n"
#~ msgstr "【校验失败】\n"

#~ msgid "%s: MD5 check failed for '%s'\n"
#~ msgstr "%s：“%s” 没能通过 MD5 校验\n"

#~ msgid "OK\n"
#~ msgstr "【校验通过】\n"

#~ msgid "%s: %d of %d file(s) failed MD5 check\n"
#~ msgstr "%1$s：在 %3$d 个文件中共有 %2$d 个未能通过 MD5 校验\n"

#~ msgid "%s: no files checked\n"
#~ msgstr "%s：没有校验任何文件\n"

#~ msgid ""
#~ "dpkg: unexpected output from `%s --print-libgcc-file-name':\n"
#~ " `%s'\n"
#~ msgstr ""
#~ "dpkg：“%s --print-libgcc-file-name”有预想之外的输出：\n"
#~ " “%s”\n"

#~ msgid "compiler libgcc filename not understood: %.250s"
#~ msgstr "编译器无法理解获取其 libgcc 文件名的选项：%.250s"

#~ msgid "--print-installation-architecture does not take any argument"
#~ msgstr "--print-installation-architecture 不需要任何参数"

#~ msgid "failed to fdopen CC pipe"
#~ msgstr "fdopen 从 CC 的管道失败"

#~ msgid "error reading from CC pipe"
#~ msgstr "无法从 CC 的管道读取数据"

#~ msgid "empty output"
#~ msgstr "没有输出"

#~ msgid "no newline"
#~ msgstr "没有发现换行符"

#~ msgid "dpkg: warning, architecture `%s' not in remapping table\n"
#~ msgstr "dpkg：警告，在重映射表中没有找到“%s”的体系架构\n"

#~ msgid "must be at least two characters"
#~ msgstr "必须至少包含两个字符"

#~ msgid "no gcc-lib component"
#~ msgstr "没有发现 gcc-lib 部件"

#~ msgid "no slash after gcc-lib"
#~ msgstr "在 gcc-lib 后无斜杠"