# Traditional Chinese translation to dpkg.
# Copyright (C) 2009 Tetralet.
# This file is distributed under the same license as the dpkg package.
#
# Asho Yeh <asho@debian.org.tw>, 2006.
#
msgid ""
msgstr ""
"Project-Id-Version: dpkg 1.13\n"
"Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org\n"
"POT-Creation-Date: 2012-07-01 17:37+0200\n"
"PO-Revision-Date: 2009-01-28 10:31+0800\n"
"Last-Translator: Tetralet <tetralet@gmail.com>\n"
"Language-Team: Debian-user in Chinese [Big5] <debian-chinese-big5@lists."
"debian.org>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: lib/dpkg/ar.c:66
#, c-format
msgid "invalid character '%c' in archive '%.250s' member '%.16s' size"
msgstr ""

#: lib/dpkg/ar.c:87 lib/dpkg/ar.c:108 lib/dpkg/ar.c:119 lib/dpkg/ar.c:123
#: lib/dpkg/ar.c:149 utils/update-alternatives.c:1144
#, fuzzy, c-format
msgid "unable to write file '%s'"
msgstr "無法開啟來源檔 `%.250s'"

#: lib/dpkg/ar.c:98
#, fuzzy, c-format
#| msgid "file name '%.50s...' is too long"
msgid "ar member name '%s' length too long"
msgstr "檔案名稱 '%.50s...' 太長了"

#: lib/dpkg/ar.c:100
#, c-format
msgid "ar member size %jd too large"
msgstr ""

#: lib/dpkg/ar.c:105
#, c-format
msgid "generated corrupt ar header for '%s'"
msgstr ""

#: lib/dpkg/ar.c:136
#, fuzzy, c-format
msgid "failed to fstat ar member file (%s)"
msgstr "無法建立臨時檔 (data)"

#: lib/dpkg/ar.c:144
#, fuzzy, c-format
#| msgid "cannot stat new name `%s': %s"
msgid "cannot append ar member file (%s) to '%s': %s"
msgstr "無法取得新名稱 `%s' 的資訊：%s"

#: lib/dpkg/arch.c:64 lib/dpkg/parsehelp.c:137
msgid "may not be empty string"
msgstr "不應該是空字串"

#: lib/dpkg/arch.c:66
#, fuzzy
#| msgid "must start with an alphanumeric"
msgid "must start with an alphanumeric"
msgstr "必須以英數字開頭"

#: lib/dpkg/arch.c:73 lib/dpkg/parsehelp.c:145
#, c-format
msgid "character `%c' not allowed (only letters, digits and characters `%s')"
msgstr "不可有字元 `%c'（只能用英文字母、數字和字元 `%s'）"

#: lib/dpkg/arch.c:312
#, fuzzy
msgid "error writing to architecture list"
msgstr "`%s' 寫入錯誤"

#: lib/dpkg/atomic-file.c:57
#, fuzzy, c-format
msgid "unable to create new file '%.250s'"
msgstr "無法開啟來源檔 `%.250s'"

#: lib/dpkg/atomic-file.c:68
#, fuzzy, c-format
msgid "unable to write new file '%.250s'"
msgstr "無法開啟來源檔 `%.250s'"

#: lib/dpkg/atomic-file.c:70
#, fuzzy, c-format
msgid "unable to flush new file '%.250s'"
msgstr "無法在 vsnprintf 裡進行刷新"

#: lib/dpkg/atomic-file.c:72
#, fuzzy, c-format
msgid "unable to sync new file '%.250s'"
msgstr "無法關閉緩衝 `%.255s'"

#: lib/dpkg/atomic-file.c:81
#, fuzzy, c-format
#| msgid "unable to stat other new file `%.250s'"
msgid "unable to close new file `%.250s'"
msgstr "無法取得其它新檔案 `%.250s' 的資訊"

#: lib/dpkg/atomic-file.c:92
#, fuzzy, c-format
#| msgid "remove old diversions-old: %s"
msgid "error removing old backup file '%s'"
msgstr "移除原本的 diversions-old：%s"

#: lib/dpkg/atomic-file.c:94
#, fuzzy, c-format
#| msgid "error creating pipe `%.255s'"
msgid "error creating new backup file '%s'"
msgstr "在建立管線 `%.255s' 時發生錯誤"

#: lib/dpkg/atomic-file.c:103 lib/dpkg/atomic-file.c:105
#: lib/dpkg/triglib.c:447 src/infodb-upgrade.c:169 src/infodb-upgrade.c:174
#: src/infodb-upgrade.c:200 src/remove.c:337 src/remove.c:428
#, c-format
msgid "cannot remove `%.250s'"
msgstr "無法移除 `%.250s'"

#: lib/dpkg/atomic-file.c:115
#, fuzzy, c-format
msgid "error installing new file '%s'"
msgstr "在安裝新的 statoverride 時發生錯誤：%s"

#: lib/dpkg/buffer.c:133
#, fuzzy
#| msgid "failed to create pipe"
msgid "failed to write"
msgstr "無法建立管線"

#: lib/dpkg/buffer.c:154
#, fuzzy
#| msgid "failed to create pipe"
msgid "failed to read"
msgstr "無法建立管線"

#: lib/dpkg/buffer.c:223
#, fuzzy
#| msgid "unexpected end of file in %.250s"
msgid "unexpected end of file or stream"
msgstr "在 %.250s 中有預期之外的檔案結束符號"

#: lib/dpkg/buffer.c:269
#, fuzzy
#| msgid "failed to exec tar"
msgid "failed to seek"
msgstr "無法執行 tar"

#: lib/dpkg/command.c:179 lib/dpkg/command.c:226 src/help.c:362
#: src/processarc.c:102 src/processarc.c:142 src/processarc.c:472
#: src/processarc.c:909 dpkg-deb/build.c:462 dpkg-deb/build.c:549
#: dpkg-deb/build.c:572 dpkg-deb/extract.c:323 dpkg-deb/info.c:65
#: dpkg-split/split.c:70 utils/update-alternatives.c:421
#, fuzzy, c-format
msgid "unable to execute %s (%s)"
msgstr "無法執行 %s"

#: lib/dpkg/compress.c:108 lib/dpkg/compress.c:117
#, c-format
msgid "%s: pass-through copy error: %s"
msgstr ""

#: lib/dpkg/compress.c:151
#, c-format
msgid "%s: error binding input to gzip stream"
msgstr ""

#: lib/dpkg/compress.c:163
#, fuzzy, c-format
msgid "%s: internal gzip read error: '%s'"
msgstr "%s：內部 gzip 錯誤：`%s'"

#: lib/dpkg/compress.c:171 lib/dpkg/compress.c:175
#, fuzzy, c-format
msgid "%s: internal gzip write error"
msgstr "%s：內部 gzip 錯誤：`%s'"

#: lib/dpkg/compress.c:189
#, c-format
msgid "%s: error binding output to gzip stream"
msgstr ""

#: lib/dpkg/compress.c:196
#, fuzzy, c-format
msgid "%s: internal gzip read error"
msgstr "%s：內部 gzip 錯誤：`%s'"

#: lib/dpkg/compress.c:206
#, fuzzy, c-format
msgid "%s: internal gzip write error: '%s'"
msgstr "%s：內部 gzip 錯誤：`%s'"

#: lib/dpkg/compress.c:219
#, fuzzy, c-format
msgid "%s: internal gzip write error: %s"
msgstr "%s：內部 gzip 錯誤：`%s'"

#: lib/dpkg/compress.c:270
#, c-format
msgid "%s: error binding input to bzip2 stream"
msgstr ""

#: lib/dpkg/compress.c:282
#, fuzzy, c-format
msgid "%s: internal bzip2 read error: '%s'"
msgstr "%s：內部 bzip2 錯誤：`%s'"

#: lib/dpkg/compress.c:290 lib/dpkg/compress.c:294 lib/dpkg/compress.c:344
#, fuzzy, c-format
msgid "%s: internal bzip2 write error"
msgstr "%s：內部 bzip2 錯誤：`%s'"

#: lib/dpkg/compress.c:308
#, c-format
msgid "%s: error binding output to bzip2 stream"
msgstr ""

#: lib/dpkg/compress.c:315
#, fuzzy, c-format
msgid "%s: internal bzip2 read error"
msgstr "%s：內部 bzip2 錯誤：`%s'"

#: lib/dpkg/compress.c:325 lib/dpkg/compress.c:336
#, fuzzy, c-format
msgid "%s: internal bzip2 write error: '%s'"
msgstr "%s：內部 bzip2 錯誤：`%s'"

#: lib/dpkg/compress.c:332
msgid "unexpected bzip2 error"
msgstr ""

#: lib/dpkg/compress.c:391
#, fuzzy
#| msgid "internal error - bad mode `%s'"
msgid "internal error (bug)"
msgstr "內部錯誤 - 不正常的模式 `%s'"

#: lib/dpkg/compress.c:398
msgid "memory usage limit reached"
msgstr ""

#: lib/dpkg/compress.c:402
#, fuzzy
#| msgid "unknown compression type `%s'!"
msgid "unsupported compression preset"
msgstr "未知的壓縮類型 `%s'！"

#: lib/dpkg/compress.c:404
msgid "unsupported options in file header"
msgstr ""

#: lib/dpkg/compress.c:408
msgid "compressed data is corrupt"
msgstr ""

#: lib/dpkg/compress.c:412
#, fuzzy
#| msgid "unexpected end of file in %.250s"
msgid "unexpected end of input"
msgstr "在 %.250s 中有預期之外的檔案結束符號"

#: lib/dpkg/compress.c:416
#, fuzzy
#| msgid "file may not contain newlines"
msgid "file format not recognized"
msgstr "檔案不該包含換行符號"

#: lib/dpkg/compress.c:420
msgid "unsupported type of integrity check"
msgstr ""

#: lib/dpkg/compress.c:461
#, fuzzy, c-format
msgid "%s: lzma read error"
msgstr "%s：內部 gzip 錯誤：`%s'"

#: lib/dpkg/compress.c:473
#, fuzzy, c-format
msgid "%s: lzma write error"
msgstr "%s：內部 gzip 錯誤：`%s'"

#: lib/dpkg/compress.c:482
#, c-format
msgid "%s: lzma close error"
msgstr ""

#: lib/dpkg/compress.c:488
#, fuzzy, c-format
msgid "%s: lzma error: %s"
msgstr ""
"%s: 在清理時發生錯誤：\n"
" %s\n"

#: lib/dpkg/compress.c:761
#, fuzzy
#| msgid "unknown compression type `%s'!"
msgid "unknown compression strategy"
msgstr "未知的壓縮類型 `%s'！"

#: lib/dpkg/dbmodify.c:68
#, c-format
msgid ""
"updates directory contains file `%.250s' whose name is too long (length=%d, "
"max=%d)"
msgstr ""
"更新目錄中包含了檔案 `%.250s'，但它的名稱太長了（長度為 %d，最大為 %d）"

#: lib/dpkg/dbmodify.c:72
#, c-format
msgid ""
"updates directory contains files with different length names (both %d and %d)"
msgstr "更新目錄中含有不同長度名稱的檔案（分別為 %d 和 %d）"

#: lib/dpkg/dbmodify.c:86
#, c-format
msgid "cannot scan updates directory `%.255s'"
msgstr "無法掃描更新目錄 `%.255s'"

#: lib/dpkg/dbmodify.c:101
#, c-format
msgid "failed to remove incorporated update file %.255s"
msgstr "無法刪除合併後的更新檔 %.255s"

#: lib/dpkg/dbmodify.c:120 dpkg-deb/build.c:450
#, c-format
msgid "unable to create `%.255s'"
msgstr "無法建立 `%.255s'"

#: lib/dpkg/dbmodify.c:124
#, c-format
msgid "unable to fill %.250s with padding"
msgstr "無法用填料填滿 %.250s"

#: lib/dpkg/dbmodify.c:126
#, c-format
msgid "unable to flush %.250s after padding"
msgstr "在填充後無法刷新 %.250s"

#: lib/dpkg/dbmodify.c:128
#, c-format
msgid "unable to seek to start of %.250s after padding"
msgstr "在填充後無法搜尋到 %.250s 的起始位置"

#: lib/dpkg/dbmodify.c:194
#, fuzzy, c-format
#| msgid "unable to open tmpfile for vsnprintf"
msgid "unable to open lock file %s for testing"
msgstr "無法替 vsnprintf 開啟臨時檔"

#: lib/dpkg/dbmodify.c:220
msgid "unable to open/create status database lockfile"
msgstr "無法開啟/建立狀態資料庫的鎖定檔"

#: lib/dpkg/dbmodify.c:230
msgid "you do not have permission to lock the dpkg status database"
msgstr "您沒有鎖定 dpkg 的狀態資料庫的權限"

#: lib/dpkg/dbmodify.c:232
#, fuzzy
#| msgid "unable to lock dpkg status database"
msgid "dpkg status database"
msgstr "無法鎖定 dpkg 的狀態資料庫"

#: lib/dpkg/dbmodify.c:256
msgid "requested operation requires superuser privilege"
msgstr "該操作需要超級使用者權限"

#: lib/dpkg/dbmodify.c:261
msgid "unable to access dpkg status area"
msgstr "無法存取 dpkg 狀態庫"

#: lib/dpkg/dbmodify.c:263
msgid "operation requires read/write access to dpkg status area"
msgstr "該操作需要在 dpkg 狀態庫有著讀寫權限"

#: lib/dpkg/dbmodify.c:314
#, c-format
msgid "failed to remove my own update file %.255s"
msgstr "無法刪除自己的更新檔 %.255s"

#: lib/dpkg/dbmodify.c:352
#, c-format
msgid "unable to write updated status of `%.250s'"
msgstr "無法寫入 `%.250s' 的更新狀態"

#: lib/dpkg/dbmodify.c:355
#, c-format
msgid "unable to flush updated status of `%.250s'"
msgstr "無法刷新 `%.250s' 的更新狀態"

#: lib/dpkg/dbmodify.c:358
#, c-format
msgid "unable to truncate for updated status of `%.250s'"
msgstr "無法縮減 `%.250s' 的更新狀態"

#: lib/dpkg/dbmodify.c:361
#, c-format
msgid "unable to fsync updated status of `%.250s'"
msgstr "無法同步 `%.250s' 的更新狀態"

#: lib/dpkg/dbmodify.c:364
#, c-format
msgid "unable to close updated status of `%.250s'"
msgstr "無法關閉 `%.250s' 的更新狀態"

#: lib/dpkg/dbmodify.c:368
#, c-format
msgid "unable to install updated status of `%.250s'"
msgstr "無法安裝 `%.250s' 的更新狀態"

#: lib/dpkg/deb-version.c:42
msgid "format version with empty major component"
msgstr ""

#: lib/dpkg/deb-version.c:44
#, fuzzy
msgid "format version has no dot"
msgstr "版本編號"

#: lib/dpkg/deb-version.c:50
msgid "format version with empty minor component"
msgstr ""

#: lib/dpkg/deb-version.c:52
#, fuzzy
msgid "format version followed by junk"
msgstr "版本編號"

#: lib/dpkg/dir.c:50
#, fuzzy, c-format
#| msgid "unable to read filedescriptor flags for %.250s"
msgid "unable to get file descriptor for directory '%s'"
msgstr "無法讀取 %.250s 的檔案重導的設定"

#: lib/dpkg/dir.c:54
#, fuzzy, c-format
msgid "unable to sync directory '%s'"
msgstr "無法開啟來源檔 `%.250s'"

#: lib/dpkg/dir.c:69 lib/dpkg/dir.c:131
#, fuzzy, c-format
msgid "unable to open directory '%s'"
msgstr "無法開啟來源檔 `%.250s'"

#: lib/dpkg/dir.c:109 src/divertcmd.c:217 dpkg-split/split.c:208
#: utils/update-alternatives.c:1288
#, fuzzy, c-format
msgid "unable to open file '%s'"
msgstr "無法開啟來源檔 `%.250s'"

#: lib/dpkg/dir.c:111 src/divertcmd.c:232 dpkg-deb/build.c:610
#: dpkg-split/join.c:70 dpkg-split/queue.c:196
#: utils/update-alternatives.c:1401
#, fuzzy, c-format
msgid "unable to sync file '%s'"
msgstr "無法開啟來源檔 `%.250s'"

#: lib/dpkg/dir.c:113 src/divertcmd.c:234 dpkg-deb/build.c:612
#: dpkg-split/join.c:72 dpkg-split/queue.c:198
#: utils/update-alternatives.c:1309 utils/update-alternatives.c:1403
#, fuzzy, c-format
msgid "unable to close file '%s'"
msgstr "無法在 vsnprintf 裡進行刷新"

#: lib/dpkg/dump.c:465
#, c-format
msgid "failed to write details of `%.50s' to `%.250s'"
msgstr "無法將 `%.50s' 的詳盡資訊寫入 `%.250s'"

#: lib/dpkg/dump.c:489
#, fuzzy, c-format
msgid "unable to set buffering on %s database file"
msgstr "無法在狀態檔上設置緩衝區"

#: lib/dpkg/dump.c:501
#, fuzzy, c-format
msgid "failed to write %s database record about '%.50s' to '%.250s'"
msgstr "無法寫入 %s 記錄（由 `%.50s' 至 `%.250s'）"

#: lib/dpkg/ehandle.c:94
#, c-format
msgid ""
"%s: unrecoverable fatal error, aborting:\n"
" %s\n"
msgstr ""
"%s：無可挽回的致命錯誤，中止操作：\n"
" %s\n"

#: lib/dpkg/ehandle.c:100
#, fuzzy, c-format
#| msgid ""
#| "%s: unrecoverable fatal error, aborting:\n"
#| " %s\n"
msgid ""
"%s: outside error context, aborting:\n"
" %s\n"
msgstr ""
"%s：無可挽回的致命錯誤，中止操作：\n"
" %s\n"

#: lib/dpkg/ehandle.c:120
#, fuzzy
#| msgid "out of memory for new cleanup entry"
msgid "out of memory for new error context"
msgstr "新的清理項目導致記憶體不敷使用"

#: lib/dpkg/ehandle.c:183
#, c-format
msgid ""
"%s: error while cleaning up:\n"
" %s\n"
msgstr ""
"%s: 在清理時發生錯誤：\n"
" %s\n"

#: lib/dpkg/ehandle.c:201
#, fuzzy, c-format
#| msgid "dpkg: too many nested errors during error recovery !!\n"
msgid "%s: too many nested errors during error recovery!!\n"
msgstr "dpkg：在錯誤回復過程中又發生了更多的層層錯誤！！\n"

#: lib/dpkg/ehandle.c:268 lib/dpkg/ehandle.c:307
msgid "out of memory for new cleanup entry"
msgstr "新的清理項目導致記憶體不敷使用"

#: lib/dpkg/ehandle.c:291
msgid "out of memory for new cleanup entry with many arguments"
msgstr "新的清理項目的參數太多導致記憶體不敷使用"

#: lib/dpkg/ehandle.c:352
#, fuzzy, c-format
msgid "%s: error: %s\n"
msgstr ""
"%s: 在清理時發生錯誤：\n"
" %s\n"

#: lib/dpkg/ehandle.c:388
#, fuzzy, c-format
msgid "%s:%s:%d:%s: internal error: %s\n"
msgstr "%s:%d：內部錯誤 `%s'\n"

#: lib/dpkg/fields.c:52
#, c-format
msgid "%s is missing"
msgstr "未找到 %s"

#: lib/dpkg/fields.c:56
#, fuzzy, c-format
#| msgid "`%.*s' is not allowed for %s"
msgid "'%.50s' is not allowed for %s"
msgstr "`%.*s' 不可用於 %s"

#: lib/dpkg/fields.c:80
#, c-format
msgid "junk after %s"
msgstr "在 %s 之後有多餘的資料"

#: lib/dpkg/fields.c:94
#, c-format
msgid "invalid package name (%.250s)"
msgstr "無效的套件名稱 (%.250s)"

#: lib/dpkg/fields.c:109
#, c-format
msgid "empty file details field `%s'"
msgstr "檔案說明欄位 `%s' 是空的"

#: lib/dpkg/fields.c:112
#, c-format
msgid "file details field `%s' not allowed in status file"
msgstr "這個檔案說明欄位 `%s' 不可用於狀態檔"

#: lib/dpkg/fields.c:125
#, c-format
msgid "too many values in file details field `%s' (compared to others)"
msgstr "檔案說明欄位 `%s' 裡的值太多（和其他的相比）"

#: lib/dpkg/fields.c:139
#, c-format
msgid "too few values in file details field `%s' (compared to others)"
msgstr "檔案說明欄位 `%s' 中的值太少（和其他的相比）"

#: lib/dpkg/fields.c:162
msgid "yes/no in boolean field"
msgstr "boolean 欄位的 yes/no"

#: lib/dpkg/fields.c:177
msgid "foreign/allowed/same/no in quadstate field"
msgstr ""

#: lib/dpkg/fields.c:189
#, c-format
msgid "'%s' is not a valid architecture name: %s"
msgstr ""

#: lib/dpkg/fields.c:208
msgid "word in `priority' field"
msgstr "`優先等級' 欄位的字串"

#: lib/dpkg/fields.c:221
msgid "value for `status' field not allowed in this context"
msgstr "在此不能使用這個 `status' 欄位的值"

#: lib/dpkg/fields.c:225
msgid "first (want) word in `status' field"
msgstr "在 `status' 欄位的第一個字 (want)"

#: lib/dpkg/fields.c:227
msgid "second (error) word in `status' field"
msgstr "在 `status' 欄位的第二個字 (error)"

#: lib/dpkg/fields.c:229
msgid "third (status) word in `status' field"
msgstr "在 `status' 欄位的第三個字 (status)"

#: lib/dpkg/fields.c:239
#, fuzzy, c-format
#| msgid "error in Version string `%.250s': %.250s"
msgid "error in Version string '%.250s'"
msgstr "版本字串 `%.250s' 有誤：%.250s"

#: lib/dpkg/fields.c:250
msgid "obsolete `Revision' or `Package-Revision' field used"
msgstr "使用了已廢棄的 `Revision' 或 `Package-Revision' 欄位"

#: lib/dpkg/fields.c:269
msgid "value for `config-version' field not allowed in this context"
msgstr "在此不能使用這個 `config-version' 欄位的值"

#: lib/dpkg/fields.c:274
#, fuzzy, c-format
#| msgid "error in Config-Version string `%.250s': %.250s"
msgid "error in Config-Version string '%.250s'"
msgstr "Config-Version 字串 `%.250s' 有誤：%.250s"

#: lib/dpkg/fields.c:300
#, c-format
msgid "value for `conffiles' has malformatted line `%.*s'"
msgstr "`conffiles' 的值有行 `%.*s' 的格式錯誤了"

#: lib/dpkg/fields.c:322
#, c-format
msgid "value for `conffiles' has line starting with non-space `%c'"
msgstr "`conffiles' 的值有行是以非空白字元 `%c' 開頭"

#: lib/dpkg/fields.c:339
msgid "root or null directory is listed as a conffile"
msgstr "root 或空目錄也被列為 conffile"

#: lib/dpkg/fields.c:400
#, c-format
msgid ""
"`%s' field, missing package name, or garbage where package name expected"
msgstr "`%s' 欄位，找不到套件名稱，或是應當為套件名稱的地方是亂碼"

#: lib/dpkg/fields.c:410
#, c-format
msgid "`%s' field, invalid package name `%.255s': %s"
msgstr "`%s' 欄位，無效的套件名稱 `%.255s'：%s"

#: lib/dpkg/fields.c:439
#, fuzzy, c-format
#| msgid ""
#| "`%s' field, missing package name, or garbage where package name expected"
msgid ""
"'%s' field, missing architecture name, or garbage where architecture name "
"expected"
msgstr "`%s' 欄位，找不到套件名稱，或是應當為套件名稱的地方是亂碼"

#: lib/dpkg/fields.c:452
#, fuzzy, c-format
#| msgid "`%s' field, reference to `%.255s': error in version: %.255s"
msgid ""
"'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s"
msgstr "`%s' 欄位，參照至 `%.255s'：版本號有誤：%.255s"

#: lib/dpkg/fields.c:486
#, c-format
msgid ""
"`%s' field, reference to `%.255s':\n"
" bad version relationship %c%c"
msgstr ""
"`%s' 欄位，參照至 `%.255s'：\n"
" 不正確的版本相依關係 %c%c"

#: lib/dpkg/fields.c:492
#, c-format
msgid ""
"`%s' field, reference to `%.255s':\n"
" `%c' is obsolete, use `%c=' or `%c%c' instead"
msgstr ""
"`%s' 欄位，參照至 `%.255s'：\n"
" `%c' 已廢棄，請替而使用 `%c=' 或 `%c%c'"

#: lib/dpkg/fields.c:502
#, c-format
msgid ""
"`%s' field, reference to `%.255s':\n"
" implicit exact match on version number, suggest using `=' instead"
msgstr ""
"`%s' 欄位，參照至 `%.255s'：\n"
" 未明確要求版本號完全一致，建議替而使用 `='"

#: lib/dpkg/fields.c:510
msgid "Only exact versions may be used for Provides"
msgstr "在 Provides 中只能指定明確的版本"

#: lib/dpkg/fields.c:514
#, c-format
msgid ""
"`%s' field, reference to `%.255s':\n"
" version value starts with non-alphanumeric, suggest adding a space"
msgstr ""
"`%s' 欄位，參照至 `%.255s'：\n"
" 版本號不是以英數字開頭，建議加一個空格"

#: lib/dpkg/fields.c:531 lib/dpkg/fields.c:535
#, c-format
msgid "`%s' field, reference to `%.255s': version contains `%c'"
msgstr "`%s' 欄位，參照至 `%.255s'：版本號含有 `%c'"

#: lib/dpkg/fields.c:539
#, c-format
msgid "`%s' field, reference to `%.255s': version unterminated"
msgstr "`%s' 欄位，參照至 `%.255s'：版本號未終止"

#: lib/dpkg/fields.c:545
#, fuzzy, c-format
#| msgid "`%s' field, reference to `%.255s': error in version: %.255s"
msgid "'%s' field, reference to '%.255s': error in version"
msgstr "`%s' 欄位，參照至 `%.255s'：版本號有誤：%.255s"

#: lib/dpkg/fields.c:555
#, c-format
msgid "`%s' field, syntax error after reference to package `%.255s'"
msgstr "`%s' 欄位，在參照至套件 `%.255s' 後的語法有誤"

#: lib/dpkg/fields.c:562
#, c-format
msgid "alternatives (`|') not allowed in %s field"
msgstr "在 %s 欄位不可有可替換符號 (`|')"

#: lib/dpkg/fields.c:616
msgid "value for `triggers-pending' field not allowed in this context"
msgstr "`triggers-pending' 欄位所設定的值不能用在這個地方"

#: lib/dpkg/fields.c:623
#, c-format
msgid "illegal pending trigger name `%.255s': %s"
msgstr "不合法的待執行觸發程式名稱 `%.255s': %s"

#: lib/dpkg/fields.c:627
#, c-format
msgid "duplicate pending trigger `%.255s'"
msgstr "重複的待執行觸發程式 `%.255s'"

#: lib/dpkg/fields.c:641
msgid "value for `triggers-awaited' field not allowed in this context"
msgstr "`triggers-awaited' 欄位所設定的值不能用在這個地方"

#: lib/dpkg/fields.c:650
#, c-format
msgid "illegal package name in awaited trigger `%.255s': %s"
msgstr "在正要執行的觸發程式 `%.255s' 裡有不合法的套件名稱：%s"

#: lib/dpkg/fields.c:655
#, c-format
msgid "duplicate awaited trigger package `%.255s'"
msgstr "重複的正要執行的觸發程式套件 `%.255s'"

#: lib/dpkg/file.c:53
#, fuzzy, c-format
msgid "unable to stat source file '%.250s'"
msgstr "無法開啟來源檔 `%.250s'"

#: lib/dpkg/file.c:57
#, fuzzy, c-format
msgid "unable to change ownership of target file '%.250s'"
msgstr "無法改變新發佈的 conffile `%.250s' 的所有權"

#: lib/dpkg/file.c:61
#, fuzzy, c-format
msgid "unable to set mode of target file '%.250s'"
msgstr "無法設定新發佈的 conffile `%.250s' 的權限"

#: lib/dpkg/file.c:87
#, fuzzy, c-format
#| msgid "unable to unlock %s: %s"
msgid "unable to unlock %s"
msgstr "無法解除鎖定 %s：%s"

#: lib/dpkg/file.c:113
#, fuzzy, c-format
msgid "unable to check file '%s' lock status"
msgstr "無法開啟來源檔 `%.250s'"

#: lib/dpkg/file.c:148
#, fuzzy, c-format
#| msgid "status database area is locked by another process"
msgid "%s is locked by another process"
msgstr "狀態資料庫已被另外一個程序鎖定了"

#: lib/dpkg/file.c:150
#, fuzzy, c-format
#| msgid "unable to unlock %s: %s"
msgid "unable to lock %s"
msgstr "無法解除鎖定 %s：%s"

#: lib/dpkg/file.c:171 lib/dpkg/file.c:176
msgid "showing file on pager"
msgstr ""

#: lib/dpkg/log.c:53
#, fuzzy, c-format
#| msgid "couldn't open log `%s': %s\n"
msgid "could not open log '%s': %s"
msgstr "無法開啟日誌檔 `%s'：%s\n"

#: lib/dpkg/log.c:85
msgid "<package status and progress file descriptor>"
msgstr "<套件的狀態及進展的檔案重導>"

#: lib/dpkg/log.c:114
#, fuzzy, c-format
msgid "unable to write to status fd %d"
msgstr "無法寫入 `%.250s' 的更新狀態"

#: lib/dpkg/mlib.c:42 lib/dpkg/mlib.c:94 utils/update-alternatives.c:272
#: utils/update-alternatives.c:329 utils/update-alternatives.c:1097
msgid "failed to allocate memory"
msgstr "無法配置記憶體"

#: lib/dpkg/mlib.c:106
#, c-format
msgid "failed to dup for std%s"
msgstr "無法替 std%s 進行 dup"

#: lib/dpkg/mlib.c:107
#, c-format
msgid "failed to dup for fd %d"
msgstr "無法替 fd %d 進行 dup"

#: lib/dpkg/mlib.c:113
msgid "failed to create pipe"
msgstr "無法建立管線"

#: lib/dpkg/mlib.c:121
#, fuzzy, c-format
msgid "error writing to '%s'"
msgstr "`%s' 寫入錯誤"

#: lib/dpkg/mlib.c:130
#, c-format
msgid "unable to read filedescriptor flags for %.250s"
msgstr "無法讀取 %.250s 的檔案重導的設定"

#: lib/dpkg/mlib.c:132
#, c-format
msgid "unable to set close-on-exec flag for %.250s"
msgstr "無法在 %.250s 上設定 close-on-exec"

#: lib/dpkg/options.c:63
#, fuzzy, c-format
msgid "configuration error: %s:%d: %s"
msgstr "設定錯誤：需賦予值給 %s"

#: lib/dpkg/options.c:77
#, fuzzy, c-format
msgid "failed to open configuration file '%.255s' for reading: %s"
msgstr "無法開啟設定檔 `%.255s' 以進行讀取"

#: lib/dpkg/options.c:104
#, c-format
msgid "unbalanced quotes in '%s'"
msgstr ""

#: lib/dpkg/options.c:120
#, fuzzy, c-format
msgid "unknown option '%s'"
msgstr "未知選項 `%s'"

#: lib/dpkg/options.c:124
#, fuzzy, c-format
msgid "'%s' needs a value"
msgstr "--%s 選項需有一個參數"

#: lib/dpkg/options.c:130
#, fuzzy, c-format
msgid "'%s' does not take a value"
msgstr "--%s 選項並不需要參數"

#: lib/dpkg/options.c:136
#, c-format
msgid "read error in configuration file `%.255s'"
msgstr "設定檔 `%.255s' 讀取錯誤"

#: lib/dpkg/options.c:137
#, c-format
msgid "error closing configuration file `%.255s'"
msgstr "在關閉設定檔 `%.255s' 時發生錯誤"

#: lib/dpkg/options.c:173
#, fuzzy, c-format
msgid "error opening configuration directory '%s'"
msgstr "在關閉設定檔 `%.255s' 時發生錯誤"

#: lib/dpkg/options.c:235
#, c-format
msgid "unknown option --%s"
msgstr "未知的選項 --%s"

#: lib/dpkg/options.c:239
#, c-format
msgid "--%s option takes a value"
msgstr "--%s 選項需有一個參數"

#: lib/dpkg/options.c:244
#, c-format
msgid "--%s option does not take a value"
msgstr "--%s 選項並不需要參數"

#: lib/dpkg/options.c:252
#, c-format
msgid "unknown option -%c"
msgstr "未知的選項 -%c"

#: lib/dpkg/options.c:257
#, c-format
msgid "-%c option takes a value"
msgstr "-%c 選項需有一個參數"

#: lib/dpkg/options.c:265
#, c-format
msgid "-%c option does not take a value"
msgstr "-%c 選項並不需要參數"

#: lib/dpkg/options.c:278
#, fuzzy, c-format
msgid "obsolete option '--%s'\n"
msgstr "警告：已廢棄選項 `--%s'\n"

#: lib/dpkg/options.c:294
#, c-format
msgid "conflicting actions -%c (--%s) and -%c (--%s)"
msgstr "相互衝突的操作 -%c (--%s) 和 -%c (--%s)"

#: lib/dpkg/parse.c:138
#, c-format
msgid "duplicate value for `%s' field"
msgstr "有多個值對應至 `%s' 欄位"

#: lib/dpkg/parse.c:150
#, c-format
msgid "user-defined field name `%.*s' too short"
msgstr "用戶自定的欄位名 `%.*s' 過短"

#: lib/dpkg/parse.c:156
#, c-format
msgid "duplicate value for user-defined field `%.*s'"
msgstr "有多個值對應至用戶自定的欄位 `%.*s'"

#: lib/dpkg/parse.c:201 lib/dpkg/parsehelp.c:314 lib/dpkg/parsehelp.c:326
#, c-format
msgid "missing %s"
msgstr "找不到 %s"

#: lib/dpkg/parse.c:203 lib/dpkg/parsehelp.c:316 lib/dpkg/parsehelp.c:329
#, c-format
msgid "empty value for %s"
msgstr "%s 的值是空的"

#: lib/dpkg/parse.c:211
#, c-format
msgid "package has field '%s' but is missing architecture"
msgstr ""

#: lib/dpkg/parse.c:214
#, fuzzy, c-format
#| msgid "package has status %s but triggers are awaited"
msgid "package has field '%s' but is architecture all"
msgstr "套件的狀態為 %s 但觸發程式正要執行"

#: lib/dpkg/parse.c:232
msgid "Configured-Version for package with inappropriate Status"
msgstr "套件的 Configured-Version 和 Status 的內容不符"

#: lib/dpkg/parse.c:243
#, c-format
msgid "package has status %s but triggers are awaited"
msgstr "套件的狀態為 %s 但觸發程式正要執行"

#: lib/dpkg/parse.c:247
msgid "package has status triggers-awaited but no triggers awaited"
msgstr "套件的狀態為 triggers-awaited 但並沒有觸發程式正要執行"

#: lib/dpkg/parse.c:253
#, c-format
msgid "package has status %s but triggers are pending"
msgstr "套件的狀態為 %s 但觸發程式尚待執行"

#: lib/dpkg/parse.c:257
msgid "package has status triggers-pending but no triggers pending"
msgstr "套件的狀態為 triggers-pending 但並沒有觸發程式尚待執行"

#: lib/dpkg/parse.c:267
msgid "Package which in state not-installed has conffiles, forgetting them"
msgstr "該套件的狀態是尚未安裝，但是它卻有 conffile，不去理會它"

#: lib/dpkg/parse.c:345
msgid "multiple non-coinstallable package instances present"
msgstr ""

#: lib/dpkg/parse.c:348
msgid "mixed non-coinstallable and coinstallable package instances present"
msgstr ""

#: lib/dpkg/parse.c:407
#, c-format
msgid ""
"%s %s (Multi-Arch: %s) is not co-installable with %s which has multiple "
"installed instances"
msgstr ""

#: lib/dpkg/parse.c:521
#, c-format
msgid "failed to open package info file `%.255s' for reading"
msgstr "無法開啟套件的 info 檔 `%.255s' 以進行讀取"

#: lib/dpkg/parse.c:527
#, c-format
msgid "can't stat package info file `%.255s'"
msgstr "無法取得套件的 info 檔 `%.255s' 的狀態"

#: lib/dpkg/parse.c:533
#, c-format
msgid "can't mmap package info file `%.255s'"
msgstr "無法 mmap 套件的 info 檔 `%.255s'"

#: lib/dpkg/parse.c:538
#, fuzzy, c-format
#| msgid "can't stat package info file `%.255s'"
msgid "reading package info file '%.255s'"
msgstr "無法取得套件的 info 檔 `%.255s' 的狀態"

#: lib/dpkg/parse.c:549
#, c-format
msgid "failed to close after read: `%.255s'"
msgstr "在讀取完畢之後無法關閉：`%.255s'"

#: lib/dpkg/parse.c:590
#, c-format
msgid "EOF after field name `%.*s'"
msgstr "在欄位名稱 `%.*s' 後有 EOF"

#: lib/dpkg/parse.c:593
#, c-format
msgid "newline in field name `%.*s'"
msgstr "在欄位名稱 `%.*s' 中有換行符號"

#: lib/dpkg/parse.c:596
#, c-format
msgid "MSDOS EOF (^Z) in field name `%.*s'"
msgstr "在欄位名稱 `%.*s' 中有 MSDOS EOF (^Z)"

#: lib/dpkg/parse.c:600
#, c-format
msgid "field name `%.*s' must be followed by colon"
msgstr "欄位名稱 `%.*s' 之後必須有個冒號"

#: lib/dpkg/parse.c:611
#, c-format
msgid "EOF before value of field `%.*s' (missing final newline)"
msgstr "在欄位 `%.*s' 的值的前面有 EOF（少了結尾的換行符號）"

#: lib/dpkg/parse.c:615
#, c-format
msgid "MSDOS EOF char in value of field `%.*s' (missing newline?)"
msgstr "在欄位 `%.*s' 的值之中有 MSDOS EOF 字元（少了換行符號？）"

#: lib/dpkg/parse.c:626
#, fuzzy, c-format
#| msgid "newline in field name `%.*s'"
msgid "blank line in value of field '%.*s'"
msgstr "在欄位名稱 `%.*s' 中有換行符號"

#: lib/dpkg/parse.c:647
#, c-format
msgid "EOF during value of field `%.*s' (missing final newline)"
msgstr "在欄位 `%.*s' 的值之中有 EOF 字元（少了結尾的換行符號）"

#: lib/dpkg/parse.c:732
msgid "several package info entries found, only one allowed"
msgstr "找到了多個套件的 info 項目，但只能有一個"

#: lib/dpkg/parse.c:758
#, c-format
msgid "no package information in `%.255s'"
msgstr "在 `%.255s' 中沒有套件的相關資訊"

#: lib/dpkg/parsehelp.c:48
#, fuzzy, c-format
msgid ""
"parsing file '%.255s' near line %d package '%.255s':\n"
" %.255s"
msgstr "警告，在檔案 `%.255s' 的第 %d 行附近"

#: lib/dpkg/parsehelp.c:52
#, fuzzy, c-format
msgid ""
"parsing file '%.255s' near line %d:\n"
" %.255s"
msgstr "警告，在檔案 `%.255s' 的第 %d 行附近"

#: lib/dpkg/parsehelp.c:139
#, fuzzy
#| msgid "must start with an alphanumeric"
msgid "must start with an alphanumeric character"
msgstr "必須以英數字開頭"

#: lib/dpkg/parsehelp.c:187
#, fuzzy
#| msgid "<none>"
msgctxt "version"
msgid "<none>"
msgstr "<無>"

#: lib/dpkg/parsehelp.c:217
msgid "version string is empty"
msgstr "版本號是空的"

#: lib/dpkg/parsehelp.c:232
msgid "version string has embedded spaces"
msgstr "版本號裡嵌有空格字元"

#: lib/dpkg/parsehelp.c:241
msgid "epoch in version is not number"
msgstr "版本中的 epoch 不是數字"

#: lib/dpkg/parsehelp.c:243
#, fuzzy
#| msgid "epoch in version is not number"
msgid "epoch in version is negative"
msgstr "版本中的 epoch 不是數字"

#: lib/dpkg/parsehelp.c:245
#, fuzzy
#| msgid "epoch in version is not number"
msgid "epoch in version is too big"
msgstr "版本中的 epoch 不是數字"

#: lib/dpkg/parsehelp.c:247
msgid "nothing after colon in version number"
msgstr "版本號的冒號後面沒有東西"

#: lib/dpkg/parsehelp.c:262
msgid "version number does not start with digit"
msgstr ""

#: lib/dpkg/parsehelp.c:265
#, fuzzy
#| msgid "nothing after colon in version number"
msgid "invalid character in version number"
msgstr "版本號的冒號後面沒有東西"

#: lib/dpkg/parsehelp.c:269
#, fuzzy
#| msgid "nothing after colon in version number"
msgid "invalid character in revision number"
msgstr "版本號的冒號後面沒有東西"

#: lib/dpkg/pkg-db.c:164 lib/dpkg/pkg-spec.c:97
#, c-format
msgid "ambiguous package name '%s' with more than one installed instance"
msgstr ""

#: lib/dpkg/pkg-format.c:87
#, fuzzy, c-format
#| msgid "invalid character `%c' in field width\n"
msgid "invalid character '%c' in field width"
msgstr "欄位寬度中有無效的字元 `%c'\n"

#: lib/dpkg/pkg-format.c:92
msgid "field width is out of range"
msgstr ""

#: lib/dpkg/pkg-format.c:183
#, fuzzy
#| msgid "missing altname"
msgid "missing closing brace"
msgstr "找不到替換名稱"

#: lib/dpkg/pkg-show.c:141
msgid "(no description available)"
msgstr "（無相關介紹）"

#: lib/dpkg/pkg-spec.c:71
#, fuzzy, c-format
#| msgid "illegal package name in awaited trigger `%.255s': %s"
msgid "illegal package name in specifier '%s%s%s': %s"
msgstr "在正要執行的觸發程式 `%.255s' 裡有不合法的套件名稱：%s"

#: lib/dpkg/pkg-spec.c:81
#, fuzzy, c-format
#| msgid "illegal package name in awaited trigger `%.255s': %s"
msgid "illegal architecture name in specifier '%s:%s': %s"
msgstr "在正要執行的觸發程式 `%.255s' 裡有不合法的套件名稱：%s"

#: lib/dpkg/report.c:48
#, fuzzy, c-format
msgid "%s: warning: %s\n"
msgstr ""
"%s: 在清理時發生錯誤：\n"
" %s\n"

#: lib/dpkg/subproc.c:55
#, fuzzy, c-format
msgid "unable to ignore signal %s before running %.250s"
msgstr "無法在執行 script 前，忽略信號 %s"

#: lib/dpkg/subproc.c:68
#, c-format
msgid "error un-catching signal %s: %s\n"
msgstr "錯誤，無法捕捉到的訊號 %s：%s\n"

#: lib/dpkg/subproc.c:78
#, c-format
msgid "%s (subprocess): %s\n"
msgstr "%s（子程序）：%s\n"

#: lib/dpkg/subproc.c:89 utils/update-alternatives.c:418
msgid "fork failed"
msgstr "fork 失敗"

#: lib/dpkg/subproc.c:119
#, c-format
msgid "subprocess %s returned error exit status %d"
msgstr "子程序 %s 傳回了錯誤退出狀態 %d"

#: lib/dpkg/subproc.c:128
#, fuzzy, c-format
msgid "subprocess %s was interrupted"
msgstr "在等待 %s 時失敗"

#: lib/dpkg/subproc.c:130
#, fuzzy, c-format
#| msgid "subprocess %s killed by signal (%s)%s"
msgid "subprocess %s was killed by signal (%s)%s"
msgstr "子程序 %s 被信號 (%s)%s 終止了"

#: lib/dpkg/subproc.c:132
msgid ", core dumped"
msgstr ", core dumped"

#: lib/dpkg/subproc.c:134
#, c-format
msgid "subprocess %s failed with wait status code %d"
msgstr "子程序 %s 失敗，並傳回了 wait 狀態碼 %d"

#: lib/dpkg/subproc.c:151 utils/update-alternatives.c:425
#, fuzzy, c-format
msgid "wait for subprocess %s failed"
msgstr "在等待 %s 時失敗"

#: lib/dpkg/trigdeferred.l:73
#, c-format
msgid "invalid package name `%.250s' in triggers deferred file `%.250s'"
msgstr "不正確的套件名稱 `%.250s'，位於觸發程式延遲檔 `%.250s'"

#: lib/dpkg/trigdeferred.l:82
#, c-format
msgid "truncated triggers deferred file `%.250s'"
msgstr "被截短的觸發程式延遲檔 `%.250s'"

#: lib/dpkg/trigdeferred.l:86
#, c-format
msgid "syntax error in triggers deferred file `%.250s' at character `%s'%s"
msgstr "在觸發程式延遲檔 `%.250s' 裡的字元 `%s'%s 裡的語法有誤"

#: lib/dpkg/trigdeferred.l:135
#, c-format
msgid "unable to open/create triggers lockfile `%.250s'"
msgstr "無法開啟/建立觸發程式鎖定檔 `%.250s'"

#: lib/dpkg/trigdeferred.l:142
#, fuzzy
#| msgid "triggered"
msgid "triggers area"
msgstr "已觸發"

#: lib/dpkg/trigdeferred.l:152
#, c-format
msgid "unable to stat triggers deferred file `%.250s'"
msgstr "無法取得觸發程式延遲檔 `%.250s' 的資訊"

#: lib/dpkg/trigdeferred.l:166
#, c-format
msgid "unable to open triggers deferred file `%.250s'"
msgstr "無法開啟觸發程式延遲檔 `%.250s'"

#: lib/dpkg/trigdeferred.l:180
#, c-format
msgid "unable to open/create new triggers deferred file `%.250s'"
msgstr "無法開啟/建立新的觸發程式延遲檔 `%.250s'"

#: lib/dpkg/trigdeferred.l:216
#, c-format
msgid "error reading triggers deferred file `%.250s'"
msgstr "在讀取觸發程式延遲檔 `%.250s' 時發生錯誤"

#: lib/dpkg/trigdeferred.l:224
#, c-format
msgid "unable to write new triggers deferred file `%.250s'"
msgstr "無法寫入新的觸發程式延遲檔 `%.250s'"

#: lib/dpkg/trigdeferred.l:229
#, c-format
msgid "unable to close new triggers deferred file `%.250s'"
msgstr "無法關閉新的觸發程式延遲檔 `%.250s'"

#: lib/dpkg/trigdeferred.l:233
#, c-format
msgid "unable to install new triggers deferred file `%.250s'"
msgstr "無法安裝新的觸發程式延遲檔 `%.250s'"

#: lib/dpkg/triglib.c:228
#, c-format
msgid ""
"invalid or unknown syntax in trigger name `%.250s' (in trigger interests for "
"package `%.250s')"
msgstr ""
"觸發程式的名稱 `%.250s' 使用了不正確或未知的語法（在套件 `%.250s' 的 trigger "
"interests 裡）"

#: lib/dpkg/triglib.c:269
#, c-format
msgid "failed to open trigger interest list file `%.250s'"
msgstr "無法開啟 trigger interest 列表檔 `%.250s'"

#: lib/dpkg/triglib.c:297
#, c-format
msgid "failed to rewind trigger interest file `%.250s'"
msgstr "無法跳到 trigger interest 檔 `%.250s' 的開頭"

#: lib/dpkg/triglib.c:312
#, c-format
msgid ""
"trigger interest file `%.250s' syntax error; illegal package name `%.250s': "
"%.250s"
msgstr ""
"trigger interest 檔 `%.250s' 的語法有誤；不合法的套件名稱 `%.250s'：%.250s"

#: lib/dpkg/triglib.c:430
#, c-format
msgid ""
"duplicate file trigger interest for filename `%.250s' and package `%.250s'"
msgstr "檔案名稱 `%.250s' 和套件 `%.250s' 的 trigger interest 檔重複了"

#: lib/dpkg/triglib.c:501
#, c-format
msgid "unable to read file triggers file `%.250s'"
msgstr "無法讀取 file trigger 檔 `%.250s'"

#: lib/dpkg/triglib.c:512
#, c-format
msgid "syntax error in file triggers file `%.250s'"
msgstr "在 file trigger 檔 `%.255s' 裡的語法有誤"

#: lib/dpkg/triglib.c:524
#, c-format
msgid ""
"file triggers record mentions illegal package name `%.250s' (for interest in "
"file `%.250s'): %.250s"
msgstr ""
"file trigger 的記錄裡包含了不合法的套件名稱 `%.250s'（在檔案 `%.250s' 的 "
"interest 裡）：%.250s"

#: lib/dpkg/triglib.c:663
#, c-format
msgid ""
"triggers ci file `%.250s' contains illegal trigger syntax in trigger name `"
"%.250s': %.250s"
msgstr ""
"觸發程式 ci 檔 `%.250s' 的觸發程式名稱 `%.250s' 不合於觸發程式的語法：%.250s"

#: lib/dpkg/triglib.c:683
#, c-format
msgid "unable to open triggers ci file `%.250s'"
msgstr "無法開啟觸發程式 ci 檔 `%.250s'"

#: lib/dpkg/triglib.c:698
msgid "triggers ci file contains unknown directive syntax"
msgstr "觸發程式 ci 檔包含了未知的指令語法"

#: lib/dpkg/triglib.c:711
#, c-format
msgid "triggers ci file contains unknown directive `%.250s'"
msgstr "觸發程式 ci 檔包含了未知的指令 `%.250s'"

#: lib/dpkg/triglib.c:777
#, c-format
msgid "unable to create triggers state directory `%.250s'"
msgstr "無法建立觸發程式狀態目錄 `%.250s'"

#: lib/dpkg/triglib.c:780
#, c-format
msgid "unable to set ownership of triggers state directory `%.250s'"
msgstr "無法設定觸發程式狀態目錄 `%.250s' 的所有權"

#: lib/dpkg/trigname.c:34
msgid "empty trigger names are not permitted"
msgstr "觸發程式的名稱不可為空的"

#: lib/dpkg/trigname.c:38
msgid "trigger name contains invalid character"
msgstr "觸發程式的名稱包含了不合法的字元"

#: lib/dpkg/utils.c:56
#, c-format
msgid "read error in `%.250s'"
msgstr "在 %.250s 中讀取錯誤"

#: lib/dpkg/utils.c:61
#, c-format
msgid "fgets gave an empty string from `%.250s'"
msgstr "fgets 從 `%.250s' 取得了一個空字串"

#: lib/dpkg/utils.c:63
#, c-format
msgid "too-long line or missing newline in `%.250s'"
msgstr "在 `%.250s' 裡的文字太長，或少了換行符號"

#: lib/dpkg/utils.c:75
#, c-format
msgid "unexpected eof reading `%.250s'"
msgstr "由 %.250s 讀取到了預期之外的 eof"

#: lib/dpkg/varbuf.c:82 lib/dpkg/varbuf.c:88
msgid "error formatting string into varbuf variable"
msgstr ""

#: src/archives.c:232
msgid "error reading from dpkg-deb pipe"
msgstr "由 dpkg-deb 的管線讀取資料時發生錯誤"

#: src/archives.c:247
#, fuzzy, c-format
#| msgid "can't mmap package info file `%.255s'"
msgid "cannot skip padding for file '%.255s': %s"
msgstr "無法 mmap 套件的 info 檔 `%.255s'"

#: src/archives.c:260
#, c-format
msgid "cannot skip file '%.255s' (replaced or excluded?) from pipe: %s"
msgstr ""

#: src/archives.c:322
#, fuzzy, c-format
msgid "unable to create `%.255s' (while processing `%.255s')"
msgstr "無法讀取 `%.255s'（位於 `%.255s'）"

#: src/archives.c:330
#, fuzzy, c-format
msgid "cannot copy extracted data for '%.255s' to '%.255s': %s"
msgstr "dpkg：%s：警告 - 無法將 `%.250s' 改名為 `%.250s'：%s\n"

#: src/archives.c:346 src/archives.c:463 src/statcmd.c:159
#, c-format
msgid "error setting ownership of `%.255s'"
msgstr "在替 `%.255s' 設定所有權時發生錯誤"

#: src/archives.c:348 src/archives.c:465 src/statcmd.c:161
#, c-format
msgid "error setting permissions of `%.255s'"
msgstr "在替 `%.255s' 設定權限時發生錯誤"

#: src/archives.c:356 src/archives.c:1141 src/archives.c:1182
#, c-format
msgid "error closing/writing `%.255s'"
msgstr "在關閉/寫入 `%.255s' 時發生錯誤"

#: src/archives.c:360
#, c-format
msgid "error creating pipe `%.255s'"
msgstr "在建立管線 `%.255s' 時發生錯誤"

#: src/archives.c:365 src/archives.c:370
#, c-format
msgid "error creating device `%.255s'"
msgstr "在建立裝置檔 `%.255s' 時發生錯誤"

#: src/archives.c:384 src/infodb-upgrade.c:146 src/infodb-upgrade.c:166
#, c-format
msgid "error creating hard link `%.255s'"
msgstr "在建立實體連結 `%.255s' 時發生錯誤"

#: src/archives.c:391 utils/update-alternatives.c:489
#, c-format
msgid "error creating symbolic link `%.255s'"
msgstr "在建立符號連結 `%.255s' 時發生錯誤"

#: src/archives.c:397
#, c-format
msgid "error creating directory `%.255s'"
msgstr "在建立目錄 `%.255s' 時發生錯誤"

#: src/archives.c:416
#, fuzzy, c-format
#| msgid "cannot open archive part file `%.250s'"
msgid "cannot compute MD5 hash for tar file '%.255s': %s"
msgstr "無法開啟套件檔的分割檔 `%.250s'"

#: src/archives.c:444 src/archives.c:448
#, c-format
msgid "error setting timestamps of `%.255s'"
msgstr "在替 `%.255s' 設定時間戳記時發生錯誤"

#: src/archives.c:460
#, c-format
msgid "error setting ownership of symlink `%.255s'"
msgstr "在替符號連結 `%.255s' 設定所有權時發生錯誤"

#: src/archives.c:537 src/archives.c:1065 utils/update-alternatives.c:317
#, c-format
msgid "unable to read link `%.255s'"
msgstr "無法讀取符號連結 `%.255s'"

#: src/archives.c:539 src/archives.c:1067 src/configure.c:479
#, c-format
msgid "symbolic link '%.250s' size has changed from %jd to %zd"
msgstr ""

#: src/archives.c:576
#, fuzzy, c-format
msgid ""
"trying to overwrite shared '%.250s', which is different from other instances "
"of package %.250s"
msgstr "正試圖覆蓋 `%.250s'，它同時也包含於套件 %.250s"

#: src/archives.c:666
#, c-format
msgid "failed to stat (dereference) existing symlink `%.250s'"
msgstr "無法取得（反引用）已存在的符號連結 `%.250s' 的狀態"

#: src/archives.c:688
#, c-format
msgid ""
"failed to stat (dereference) proposed new symlink target `%.250s' for "
"symlink `%.250s'"
msgstr ""
"無法取得（反引用）將要指向新符號連結 `%.250s' 的符號連結 `%.250s' 的狀態"

#: src/archives.c:746
#, c-format
msgid ""
"trying to overwrite `%.250s', which is the diverted version of `"
"%.250s' (package: %.100s)"
msgstr "試圖覆蓋 `%.250s'，它是 `%.250s'（套件：%.100s）抽換後的版本"

#: src/archives.c:752
#, c-format
msgid "trying to overwrite `%.250s', which is the diverted version of `%.250s'"
msgstr "試圖覆蓋 `%.250s'，它是 `%.250s' 抽換後的版本"

#: src/archives.c:782
#, c-format
msgid "unable to stat `%.255s' (which I was about to install)"
msgstr "無法取得 `%.255s' 的狀態（正要安裝這個檔案）"

#: src/archives.c:790
#, c-format
msgid ""
"unable to clean up mess surrounding `%.255s' before installing another "
"version"
msgstr "在安裝另一版本前，無法清理 `%.255s' 的混亂狀態"

#: src/archives.c:796
#, c-format
msgid "unable to stat restored `%.255s' before installing another version"
msgstr "在安裝另一版本前，無法取得回復後的 `%.255s' 的狀態"

#: src/archives.c:832
#, c-format
msgid "archive contained object `%.255s' of unknown type 0x%x"
msgstr "套件檔中包含了物件 `%.255s' 有著不明的型態 0x%x"

#: src/archives.c:914 src/divertcmd.c:148 utils/update-alternatives.c:631
#: utils/update-alternatives.c:1211 utils/update-alternatives.c:1279
#: utils/update-alternatives.c:1437 utils/update-alternatives.c:1684
#: utils/update-alternatives.c:2168 utils/update-alternatives.c:2234
#: utils/update-alternatives.c:2373
#, fuzzy, c-format
#| msgid "cannot stat old name `%s': %s"
msgid "cannot stat file '%s'"
msgstr "無法取得原本名稱 `%s' 的資訊：%s"

#: src/archives.c:929
#, c-format
msgid "Replacing files in old package %s ...\n"
msgstr "正在替換成原有套件 %s 裡的檔案...\n"

#: src/archives.c:934
#, c-format
msgid "Replaced by files in installed package %s ...\n"
msgstr "被替換成已安裝套件 %s 裡的檔案...\n"

#: src/archives.c:943
#, fuzzy, c-format
msgid ""
"trying to overwrite directory '%.250s' in package %.250s %.250s with "
"nondirectory"
msgstr "正試圖用套件 %2$.250s 裡一個非目錄的檔案替換目錄 `%1$.250s'"

#: src/archives.c:950
#, fuzzy, c-format
msgid "trying to overwrite '%.250s', which is also in package %.250s %.250s"
msgstr "正試圖覆蓋 `%.250s'，它同時也包含於套件 %.250s"

#: src/archives.c:1055
#, c-format
msgid "unable to move aside `%.255s' to install new version"
msgstr "無法將 `%.255s' 移開以安裝新的版本"

#: src/archives.c:1072
#, c-format
msgid "unable to make backup symlink for `%.255s'"
msgstr "無法替 `%.255s' 做一個符號連結備份"

#: src/archives.c:1074
#, c-format
msgid "unable to chown backup symlink for `%.255s'"
msgstr "無法 chown `%.255s' 的符號連結備份"

#: src/archives.c:1079
#, c-format
msgid "unable to make backup link of `%.255s' before installing new version"
msgstr "無法在安裝新的版本前，為 `%.255s' 做一個符號連結備份"

#: src/archives.c:1096 src/archives.c:1190
#, c-format
msgid "unable to install new version of `%.255s'"
msgstr "無法安裝 `%.255s' 的新版本"

#: src/archives.c:1135 src/archives.c:1178
#, fuzzy, c-format
msgid "unable to open '%.255s'"
msgstr "無法建立 `%.255s'"

#: src/archives.c:1180
#, fuzzy, c-format
msgid "unable to sync file '%.255s'"
msgstr "無法關閉緩衝 `%.255s'"

#: src/archives.c:1257
#, fuzzy, c-format
msgid ""
"ignoring dependency problem with %s:\n"
"%s"
msgstr ""
"dpkg：警告 - 忽略 %s 的相依問題：\n"
"%s"

#: src/archives.c:1262
#, fuzzy, c-format
msgid ""
"considering deconfiguration of essential\n"
" package %s, to enable %s"
msgstr "dpkg: 警告 - 正打算清除基本套件 %s 的設定，以啟用 %s。\n"

#: src/archives.c:1266
#, fuzzy, c-format
#| msgid ""
#| "dpkg: no, %s is essential, will not deconfigure\n"
#| " it in order to enable %s.\n"
msgid ""
"no, %s is essential, will not deconfigure\n"
" it in order to enable %s"
msgstr "dpkg：不行，%s 是基本套件，不會清除它的設定只為了啟用 %s。\n"

#: src/archives.c:1275
#, fuzzy, c-format
#| msgid ""
#| "dpkg: no, cannot proceed with %s (--auto-deconfigure will help):\n"
#| "%s"
msgid ""
"no, cannot proceed with %s (--auto-deconfigure will help):\n"
"%s"
msgstr ""
"dpkg：不行，無法繼續進行 %s（試試 --auto-deconfigure）：\n"
"%s"

#: src/archives.c:1285
#, c-format
msgid "removal of %.250s"
msgstr "%.250s 的移除作業"

#: src/archives.c:1310
#, c-format
msgid "installation of %.250s"
msgstr "`%.255s' 的安裝作業"

#: src/archives.c:1312
#, fuzzy, c-format
#| msgid ""
#| "dpkg: considering deconfiguration of %s, which would be broken by %s ...\n"
msgid "considering deconfiguration of %s, which would be broken by %s ..."
msgstr "dpkg：正打算清除 %s 的設定，因為可能會被 %s 弄壞...\n"

#: src/archives.c:1318
#, fuzzy, c-format
#| msgid "dpkg: yes, will deconfigure %s (broken by %s).\n"
msgid "yes, will deconfigure %s (broken by %s)"
msgstr "dpkg：好，將清除 %s 的設定（被 %s 弄壞了）。\n"

#: src/archives.c:1323 src/archives.c:1444
#, fuzzy, c-format
#| msgid ""
#| "dpkg: regarding %s containing %s:\n"
#| "%s"
msgid ""
"regarding %s containing %s:\n"
"%s"
msgstr ""
"dpkg：關於 %s 包含了 %s：\n"
"%s"

#: src/archives.c:1331
#, fuzzy
msgid "ignoring breakage, may proceed anyway!"
msgstr "dpkg：警告 - 忽略損壞，將強制繼續安裝！\n"

#: src/archives.c:1336
#, c-format
msgid ""
"installing %.250s would break %.250s, and\n"
" deconfiguration is not permitted (--auto-deconfigure might help)"
msgstr ""
"安裝 %.250s 將會毀損 %.250s，\n"
" 且不打算要清除設定（--auto-deconfigure 也許有用）"

#: src/archives.c:1341
#, c-format
msgid "installing %.250s would break existing software"
msgstr "安裝 %.250s 將會毀損現有的軟體"

#: src/archives.c:1371
#, fuzzy, c-format
#| msgid "dpkg: considering removing %s in favour of %s ...\n"
msgid "considering removing %s in favour of %s ..."
msgstr "dpkg：為了 %2$s，正打算移除 %1$s ...\n"

#: src/archives.c:1377
#, fuzzy, c-format
#| msgid "%s is not properly installed - ignoring any dependencies on it.\n"
msgid "%s is not properly installed; ignoring any dependencies on it"
msgstr "%s 未被正確安裝 - 將忽略它所有的相依關係。\n"

#: src/archives.c:1406
#, fuzzy, c-format
#| msgid "dpkg: may have trouble removing %s, as it provides %s ...\n"
msgid "may have trouble removing %s, as it provides %s ..."
msgstr "dpkg：也許移除 %s 會出問題，因為它提供了 %s ...\n"

#: src/archives.c:1421
#, fuzzy, c-format
msgid ""
"package %s requires reinstallation, but will remove anyway as you requested"
msgstr "dpkg：儘管套件 %s 需要重新安裝，但還是應您的要求將其強制移除。\n"

#: src/archives.c:1425
#, fuzzy, c-format
#| msgid "dpkg: package %s requires reinstallation, will not remove.\n"
msgid "package %s requires reinstallation, will not remove"
msgstr "dpkg：套件 %s 需要重新安裝，將不會被移除。\n"

#: src/archives.c:1434
#, fuzzy, c-format
#| msgid "dpkg: yes, will remove %s in favour of %s.\n"
msgid "yes, will remove %s in favour of %s"
msgstr "dpkg：好的，為了 %2$s 將會移除 %1$s。\n"

#: src/archives.c:1447
#, c-format
msgid "conflicting packages - not installing %.250s"
msgstr "套件衝突 - 將不安裝 %.250s"

#: src/archives.c:1449
#, fuzzy
msgid "ignoring conflict, may proceed anyway!"
msgstr "dpkg：警告 - 忽略衝突，將強制繼續安裝！\n"

#: src/archives.c:1495
#, c-format
msgid "--%s --recursive needs at least one path argument"
msgstr "--%s --recursive 需要至少一個路徑作為參數"

#: src/archives.c:1505
#, fuzzy
msgid "find for dpkg --recursive"
msgstr "無法為 --recursive 選項執行 find"

#: src/archives.c:1526
msgid "failed to fdopen find's pipe"
msgstr "無法 fdopen find 的管線"

#: src/archives.c:1532
msgid "error reading find's pipe"
msgstr "在讀取 find 的管線時發生錯誤"

#: src/archives.c:1533
msgid "error closing find's pipe"
msgstr "在關閉 find 的管線時發生錯誤"

#: src/archives.c:1536
#, c-format
msgid "find for --recursive returned unhandled error %i"
msgstr "--recursive 選項所呼叫的 find 返回了未被處理的錯誤 %i"

#: src/archives.c:1539
msgid "searched, but found no packages (files matching *.deb)"
msgstr "已進行搜尋，但是沒有找到任何套件（即符合 *.deb 的檔案）"

#: src/archives.c:1550
#, c-format
msgid "--%s needs at least one package archive file argument"
msgstr "--%s 需要至少一個套件檔作為參數"

#: src/archives.c:1585 src/divertcmd.c:76 src/divertcmd.c:116
#: src/enquiry.c:218 src/enquiry.c:335 src/enquiry.c:526 src/enquiry.c:528
#: src/enquiry.c:541 src/enquiry.c:571 src/main.c:68 src/main.c:170
#: src/main.c:320 src/main.c:578 src/packages.c:266 src/querycmd.c:291
#: src/querycmd.c:393 src/querycmd.c:440 src/querycmd.c:449 src/querycmd.c:495
#: src/querycmd.c:578 src/querycmd.c:766 src/querycmd.c:814 src/select.c:99
#: src/statcmd.c:64 src/statcmd.c:94 src/trigcmd.c:60 src/trigcmd.c:92
#: dpkg-deb/build.c:444 dpkg-deb/extract.c:218 dpkg-deb/extract.c:254
#: dpkg-deb/info.c:205 dpkg-deb/info.c:267 dpkg-deb/main.c:62
#: dpkg-deb/main.c:130 dpkg-split/info.c:266 dpkg-split/main.c:56
#: dpkg-split/main.c:100 dpkg-split/queue.c:150 dpkg-split/queue.c:289
msgid "<standard output>"
msgstr ""

#: src/archives.c:1586 src/packages.c:267 src/querycmd.c:292
#: src/querycmd.c:391 src/querycmd.c:501 src/querycmd.c:579 src/select.c:100
#: dpkg-split/main.c:177 dpkg-split/queue.c:227
msgid "<standard error>"
msgstr ""

#: src/archives.c:1627
#, fuzzy, c-format
#| msgid "Selecting previously deselected package %s.\n"
msgid "Selecting previously unselected package %s.\n"
msgstr "選取了原先未被選取的套件 %s。\n"

#: src/archives.c:1632
#, fuzzy, c-format
#| msgid "Skipping deselected package %s.\n"
msgid "Skipping unselected package %s.\n"
msgstr "略過未被選取的套件 %s。\n"

#: src/archives.c:1649
#, fuzzy, c-format
#| msgid "Version %.250s of %.250s already installed, skipping.\n"
msgid "version %.250s of %.250s already installed, skipping"
msgstr "已有安裝 %.250s 版的 %.250s，略過。\n"

#: src/archives.c:1658
#, fuzzy, c-format
msgid "downgrading %.250s from %.250s to %.250s"
msgstr "%s - 警告：即將把 %.250s 從 %.250s 降級到 %.250s。\n"

#: src/archives.c:1664
#, fuzzy, c-format
#| msgid "Will not downgrade %.250s from version %.250s to %.250s, skipping.\n"
msgid "will not downgrade %.250s from %.250s to %.250s, skipping"
msgstr "將不會把 %.250s 從 %.250s 降級到 %.250s，略過。\n"

#: src/cleanup.c:87
#, c-format
msgid ""
"unable to remove newly-installed version of `%.250s' to allow reinstallation "
"of backup copy"
msgstr "無法移除 `%.250s' 的新安裝版本以便能重新以備份副本安裝"

#: src/cleanup.c:94
#, c-format
msgid "unable to restore backup version of `%.250s'"
msgstr "無法回復為 `%.250s' 的備份版本"

#: src/cleanup.c:98
#, fuzzy, c-format
#| msgid "unable to restore backup version of `%.250s'"
msgid "unable to remove backup copy of '%.250s'"
msgstr "無法回復為 `%.250s' 的備份版本"

#: src/cleanup.c:102
#, c-format
msgid "unable to remove newly-installed version of `%.250s'"
msgstr "無法移除 `%.250s' 的新安裝版本"

#: src/cleanup.c:109
#, c-format
msgid "unable to remove newly-extracted version of `%.250s'"
msgstr "無法移除 `%.250s' 的新解壓版本"

#: src/configure.c:125
#, fuzzy, c-format
#| msgid "unable to stat new dist conffile `%.250s'"
msgid "unable to stat new distributed conffile '%.250s'"
msgstr "無法取得新發佈的 conffile `%.250s' 的狀態"

#: src/configure.c:135
#, c-format
msgid "unable to stat current installed conffile `%.250s'"
msgstr "無法取得現已安裝的 conffile `%.250s' 的狀態"

#: src/configure.c:147
#, c-format
msgid ""
"\n"
"Configuration file `%s', does not exist on system.\n"
"Installing new config file as you requested.\n"
msgstr ""
"\n"
"在系統中找不到設定檔 `%s'。\n"
"應您的要求，安裝新的設定檔。\n"

#: src/configure.c:189
#, fuzzy, c-format
msgid "%s: failed to remove old backup '%.250s': %s"
msgstr "dpkg：%s：警告 - 無法移除原有的備份檔 `%.250s'：%s\n"

#: src/configure.c:198
#, fuzzy, c-format
msgid "%s: failed to rename '%.250s' to '%.250s': %s"
msgstr "dpkg：%s：警告 - 無法將 `%.250s' 改名為 `%.250s'：%s\n"

#: src/configure.c:205
#, fuzzy, c-format
msgid "%s: failed to remove '%.250s': %s"
msgstr "%s：無法執行 '%s %s'"

#: src/configure.c:212
#, fuzzy, c-format
msgid "%s: failed to remove old distributed version '%.250s': %s"
msgstr "dpkg：%s：警告 - 無法移除原有的發佈版 `%.250s'：%s\n"

#: src/configure.c:217
#, fuzzy, c-format
msgid "%s: failed to remove '%.250s' (before overwrite): %s"
msgstr "dpkg：%s：警告 - 無法移除 `%.250s'（在要進行覆蓋前）：%s\n"

#: src/configure.c:222
#, fuzzy, c-format
msgid "%s: failed to link '%.250s' to '%.250s': %s"
msgstr "dpkg：%s：警告 - 無法將 `%.250s' 指向 `%.250s'：%s\n"

#: src/configure.c:227
#, c-format
msgid "Installing new version of config file %s ...\n"
msgstr "正在安裝新版的設定檔 %s ...\n"

#: src/configure.c:233 utils/update-alternatives.c:496
#, c-format
msgid "unable to install `%.250s' as `%.250s'"
msgstr "無法將 `%.250s' 安裝為 `%.250s'"

#: src/configure.c:285
#, c-format
msgid "no package named `%s' is installed, cannot configure"
msgstr "未曾安裝名為 `%s' 的套件，無法設定"

#: src/configure.c:288
#, c-format
msgid "package %.250s is already installed and configured"
msgstr "套件 %.250s 已安裝並設定完成"

#: src/configure.c:291
#, c-format
msgid ""
"package %.250s is not ready for configuration\n"
" cannot configure (current status `%.250s')"
msgstr ""
"套件 %.250s 尚未準備好可進行設定\n"
" 不能設定（目前的狀態為 `%.250s'）"

#: src/configure.c:303
#, fuzzy, c-format
#| msgid ""
#| "package %.250s is not ready for configuration\n"
#| " cannot configure (current status `%.250s')"
msgid ""
"package %s cannot be configured because %s is not ready (current status '%s')"
msgstr ""
"套件 %.250s 尚未準備好可進行設定\n"
" 不能設定（目前的狀態為 `%.250s'）"

#: src/configure.c:311
#, c-format
msgid ""
"package %s %s cannot be configured because %s is at a different version (%s)"
msgstr ""

#: src/configure.c:347
#, fuzzy, c-format
#| msgid ""
#| "dpkg: dependency problems prevent configuration of %s:\n"
#| "%s"
msgid ""
"dependency problems prevent configuration of %s:\n"
"%s"
msgstr ""
"dpkg：因相依問題，不能設定 %s：\n"
"%s"

#: src/configure.c:350
msgid "dependency problems - leaving unconfigured"
msgstr "相依問題 - 保留為未設定"

#: src/configure.c:353
#, fuzzy, c-format
#| msgid ""
#| "dpkg: %s: dependency problems, but configuring anyway as you requested:\n"
#| "%s"
msgid ""
"%s: dependency problems, but configuring anyway as you requested:\n"
"%s"
msgstr ""
"dpkg：%s：相依問題 - 但還是依您要求強制進行設定：\n"
"%s"

#: src/configure.c:361
msgid ""
"Package is in a very bad inconsistent state - you should\n"
" reinstall it before attempting configuration."
msgstr "該套件正處於非常不穩定的狀態 - 您最好在設定它之前，先重新安裝它。"

#: src/configure.c:364
#, c-format
msgid "Setting up %s (%s) ...\n"
msgstr "正在設定 %s (%s) ...\n"

#: src/configure.c:448
#, fuzzy, c-format
msgid ""
"%s: unable to stat config file '%s'\n"
" (= '%s'): %s"
msgstr ""
"dpkg：%s：警告 - 無法取得設定檔 `%s' 的狀態\n"
" (= `%s')：%s\n"

#: src/configure.c:462
#, fuzzy, c-format
msgid ""
"%s: config file '%s' is a circular link\n"
" (= '%s')"
msgstr ""
"dpkg：%s：警告 - 設定檔 `%s' 是一個循環連結\n"
" (= `%s')\n"

#: src/configure.c:473
#, fuzzy, c-format
msgid ""
"%s: unable to readlink conffile '%s'\n"
" (= '%s'): %s"
msgstr ""
"dpkg：%s：警告 - 無法 readlink conffile `%s'\n"
" (= `%s')：%s\n"

#: src/configure.c:500
#, fuzzy, c-format
msgid ""
"%s: conffile '%.250s' resolves to degenerate filename\n"
" ('%s' is a symlink to '%s')"
msgstr ""
"dpkg：%s：警告 - conffile `%.250s' 指向了有問題的檔案名稱\n"
" （`%s' 是一個指向 `%s' 的符號連結）\n"

#: src/configure.c:516
#, fuzzy, c-format
msgid "%s: conffile '%.250s' is not a plain file or symlink (= '%s')"
msgstr "dpkg：%s：警告 - conffile `%.250s' 並非一般的檔案或符號連結 (= `%s')\n"

#: src/configure.c:544 dpkg-split/split.c:142
#, fuzzy, c-format
#| msgid "cannot stat old name `%s': %s"
msgid "cannot compute MD5 hash for file '%s': %s"
msgstr "無法取得原本名稱 `%s' 的資訊：%s"

#: src/configure.c:551
#, fuzzy, c-format
msgid "%s: unable to open %s for hash: %s"
msgstr "dpkg：%s：警告 - 無法開啟 conffile %s 以進行雜湊：%s\n"

#: src/configure.c:577 src/configure.c:581
msgid "conffile difference visualizer"
msgstr ""

#: src/configure.c:598
msgid "Type `exit' when you're done.\n"
msgstr "完成後，請輸入 `exit'。\n"

#: src/configure.c:607 src/configure.c:611
msgid "conffile shell"
msgstr ""

#: src/configure.c:657
#, c-format
msgid ""
"\n"
"Configuration file `%s'"
msgstr ""
"\n"
"設定檔 `%s'"

#: src/configure.c:659
#, c-format
msgid " (actually `%s')"
msgstr " （實際上是 `%s'）"

#: src/configure.c:663
#, c-format
msgid ""
"\n"
" ==> File on system created by you or by a script.\n"
" ==> File also in package provided by package maintainer.\n"
msgstr ""
"\n"
" ==> 系統中的這個檔案是由您建立或者是由 script 建立的。\n"
" ==> 套件維護者所提供的套件中也包含了該檔案。\n"

#: src/configure.c:668
#, c-format
msgid ""
"\n"
"     Not modified since installation.\n"
msgstr ""
"\n"
"     在安裝後未曾更動。\n"

#: src/configure.c:670
#, c-format
msgid ""
"\n"
" ==> Modified (by you or by a script) since installation.\n"
msgstr ""
"\n"
" ==> 在安裝後曾被（您或某個 script）修改過。\n"

#: src/configure.c:671
#, c-format
msgid ""
"\n"
" ==> Deleted (by you or by a script) since installation.\n"
msgstr ""
"\n"
" ==> 在安裝後被（您或某個 script）刪掉了。\n"

#: src/configure.c:674
#, c-format
msgid " ==> Package distributor has shipped an updated version.\n"
msgstr " ==> 套件的提交者提供了一個更新版本。\n"

#: src/configure.c:675
#, c-format
msgid "     Version in package is the same as at last installation.\n"
msgstr "     套件的版本和上次安裝的版本是相同的。\n"

#: src/configure.c:683
#, c-format
msgid " ==> Using new file as you requested.\n"
msgstr " ==> 按照您的要求，使用新的檔案。\n"

#: src/configure.c:687
#, c-format
msgid " ==> Using current old file as you requested.\n"
msgstr " ==> 按照您的要求，保留原有的舊檔案。\n"

#: src/configure.c:696
#, c-format
msgid " ==> Keeping old config file as default.\n"
msgstr " ==> 預設上是保留原有的設定檔。\n"

#: src/configure.c:700
#, c-format
msgid " ==> Using new config file as default.\n"
msgstr " ==> 預設上是使用新的設定檔。\n"

#: src/configure.c:707
#, fuzzy, c-format
msgid ""
"   What would you like to do about it ?  Your options are:\n"
"    Y or I  : install the package maintainer's version\n"
"    N or O  : keep your currently-installed version\n"
"      D     : show the differences between the versions\n"
"      Z     : start a shell to examine the situation\n"
msgstr ""
"   您希望如何處理？ 選項如下：\n"
"    Y 或 I  ：安裝套件維護者所提供的版本\n"
"    N 或 O  ：保留您原本安裝的版本\n"
"      D     ：顯示兩者有何不同\n"
"      Z     ：把目前程序切換到背景，再加以研判\n"

#: src/configure.c:714
#, c-format
msgid " The default action is to keep your current version.\n"
msgstr " 預設的動作是保留您目前使用的版本。\n"

#: src/configure.c:716
#, c-format
msgid " The default action is to install the new version.\n"
msgstr " 預設的動作是安裝新的版本。\n"

#: src/configure.c:721
msgid "[default=N]"
msgstr "[預設=N]"

#: src/configure.c:722
msgid "[default=Y]"
msgstr "[預設=Y]"

#: src/configure.c:723
msgid "[no default]"
msgstr "[無預設值]"

#: src/configure.c:726
msgid "error writing to stderr, discovered before conffile prompt"
msgstr "在 conffile 提示輸入之前，發現寫入 stderr 錯誤"

#: src/configure.c:735
msgid "read error on stdin at conffile prompt"
msgstr "在 conffile 提示輸入時，發現讀取 stdin 錯誤"

#: src/configure.c:736
msgid "EOF on stdin at conffile prompt"
msgstr "在 conffile 提示輸入時，由 stdin 中讀到了 EOF"

#: src/depcon.c:246
#, c-format
msgid "%s depends on %s"
msgstr "%s 相依於 %s"

#: src/depcon.c:249
#, c-format
msgid "%s pre-depends on %s"
msgstr "%s 預先相依於 %s"

#: src/depcon.c:252
#, c-format
msgid "%s recommends %s"
msgstr "%s 推薦 %s"

#: src/depcon.c:255
#, c-format
msgid "%s suggests %s"
msgstr "%s 建議 %s"

#: src/depcon.c:258
#, c-format
msgid "%s breaks %s"
msgstr "%s 會損毀 %s"

#: src/depcon.c:261
#, c-format
msgid "%s conflicts with %s"
msgstr "%s 衝突於 %s"

#: src/depcon.c:264
#, c-format
msgid "%s enhances %s"
msgstr "%s 加強了 %s"

#: src/depcon.c:372
#, c-format
msgid "  %.250s is to be removed.\n"
msgstr "  即將移除 %.250s。\n"

#: src/depcon.c:376
#, c-format
msgid "  %.250s is to be deconfigured.\n"
msgstr "  即將清除 %.250s 的設定。\n"

#: src/depcon.c:384
#, c-format
msgid "  %.250s is to be installed, but is version %.250s.\n"
msgstr "  即將安裝 %.250s，不過卻是版本 %.250s。\n"

#: src/depcon.c:398
#, c-format
msgid "  %.250s is installed, but is version %.250s.\n"
msgstr "  已安裝了 %.250s，不過卻是版本 %.250s。\n"

#: src/depcon.c:418
#, c-format
msgid "  %.250s is unpacked, but has never been configured.\n"
msgstr "  已解開了 %.250s，但是它還沒有被設定過。\n"

#: src/depcon.c:423
#, c-format
msgid "  %.250s is unpacked, but is version %.250s.\n"
msgstr "  已經解開了 %.250s，不過卻是版本 %.250s。\n"

#: src/depcon.c:432
#, c-format
msgid "  %.250s latest configured version is %.250s.\n"
msgstr "  上次設定 %.250s 時，版本為 %.250s。\n"

#: src/depcon.c:444
#, c-format
msgid "  %.250s is %s.\n"
msgstr "  %.250s 現為 %s。\n"

#: src/depcon.c:482
#, c-format
msgid "  %.250s provides %.250s but is to be removed.\n"
msgstr "  %.250s 提供了 %.250s，但卻將被移除。\n"

#: src/depcon.c:487
#, c-format
msgid "  %.250s provides %.250s but is to be deconfigured.\n"
msgstr "  %.250s 提供了 %.250s，但卻將要清除它的設定。\n"

#: src/depcon.c:497
#, c-format
msgid "  %.250s provides %.250s but is %s.\n"
msgstr "  %.250s 提供了 %.250s，但是它現為 %s。\n"

#: src/depcon.c:512
#, c-format
msgid "  %.250s is not installed.\n"
msgstr "  %.250s 沒有被安裝。\n"

#: src/depcon.c:545
#, c-format
msgid "  %.250s (version %.250s) is to be installed.\n"
msgstr "  即將安裝 %.250s（版本 %.250s）。\n"

#: src/depcon.c:576
#, c-format
msgid "  %.250s (version %.250s) is present and %s.\n"
msgstr "  %.250s（版本 %.250s）已存在且 %s。\n"

#: src/depcon.c:606
#, c-format
msgid "  %.250s provides %.250s and is to be installed.\n"
msgstr "  %.250s 提供了 %.250s，且將會被安裝。\n"

#: src/depcon.c:649
#, c-format
msgid "  %.250s provides %.250s and is present and %s.\n"
msgstr "  %.250s 提供了 %.250s，它已存在且 %s。\n"

#: src/divertcmd.c:53
#, fuzzy
#| msgid "Type dpkg-trigger --help for help about this utility."
msgid "Use --help for help about diverting files."
msgstr "輸入 dpkg-trigger --help 以取得這個工具的說明。"

#: src/divertcmd.c:69 src/statcmd.c:57 utils/update-alternatives.c:80
#, c-format
msgid "Debian %s version %s.\n"
msgstr "Debian %s 版本 %s。\n"

#: src/divertcmd.c:73 src/main.c:65 src/querycmd.c:763 src/statcmd.c:61
#: src/trigcmd.c:57 dpkg-deb/main.c:59 dpkg-split/main.c:53
#: utils/update-alternatives.c:84
#, fuzzy, c-format
msgid ""
"This is free software; see the GNU General Public License version 2 or\n"
"later for copying conditions. There is NO warranty.\n"
msgstr ""
"\n"
"這是自由軟體﹔要獲知複製該軟體的前提和條件，請參閱 GNU Public Licence\n"
"第 2 或更新的版本。本軟體【不】提供任何保証。\n"

#: src/divertcmd.c:85 src/main.c:83 src/querycmd.c:775 src/statcmd.c:73
#: dpkg-deb/main.c:71 dpkg-split/main.c:65 utils/update-alternatives.c:92
#, c-format
msgid ""
"Usage: %s [<option> ...] <command>\n"
"\n"
msgstr ""
"用法：%s [<選項> ...] <命令>\n"
"\n"

#: src/divertcmd.c:89
#, c-format
msgid ""
"Commands:\n"
"  [--add] <file>           add a diversion.\n"
"  --remove <file>          remove the diversion.\n"
"  --list [<glob-pattern>]  show file diversions.\n"
"  --listpackage <file>     show what package diverts the file.\n"
"  --truename <file>        return the diverted file.\n"
"\n"
msgstr ""

#: src/divertcmd.c:98
#, fuzzy, c-format
msgid ""
"Options:\n"
"  --package <package>      name of the package whose copy of <file> will "
"not\n"
"                             be diverted.\n"
"  --local                  all packages' versions are diverted.\n"
"  --divert <divert-to>     the name used by other packages' versions.\n"
"  --rename                 actually move the file aside (or back).\n"
"  --admindir <directory>   set the directory with the diversions file.\n"
"  --test                   don't do anything, just demonstrate.\n"
"  --quiet                  quiet operation, minimal output.\n"
"  --help                   show this help message.\n"
"  --version                show the version.\n"
"\n"
msgstr ""
"用法：%s [<選項> ...] <命令>\n"
"\n"
"命令：\n"
"  [--add] <檔案>           新增抽換項目。\n"
"  --remove <檔案>          刪除抽換項目。\n"
"  --list [<比對表達式>]    顯示檔案的抽換項目。\n"
"  --truename <檔案>        傳回被抽換的檔案。\n"
"\n"
"選項：\n"
"  --package <套件>         套件的名稱，它的 <檔案> 的副本將不會被抽換。\n"
"  --local                  所有套件版本都會被抽換。\n"
"  --divert <抽換名稱>      其它的套件版本所會使用名稱。\n"
"  --rename                 真的進行檔案的搬移（或回復）。\n"
"  --admindir <目錄>        設定抽換檔的所使用的目錄。\n"
"  --test                   不實際進行，僅模擬。\n"
"  --quiet                  安靜模式，儘量不顯示訊息。\n"
"  --help                   顯示這個說明訊息。\n"
"  --version                顯示版本資訊。\n"
"\n"
"在新增時，預設為 --local 及 --divert <原始檔>.distrib。\n"
"在移除時，--package 或 --local 及 --divert 必須相符（若有指定的話）。\n"
"套件的 preinst/postrm scripts 應當要指定 --package 及 --divert。\n"

#: src/divertcmd.c:112
#, c-format
msgid ""
"When adding, default is --local and --divert <original>.distrib.\n"
"When removing, --package or --local and --divert must match if specified.\n"
"Package preinst/postrm scripts should always specify --package and --"
"divert.\n"
msgstr ""

#: src/divertcmd.c:166
#, fuzzy, c-format
#| msgid "error checking `%s': %s"
msgid "error checking '%s'"
msgstr "在檢查 `%s' 時發生錯誤：%s"

#: src/divertcmd.c:201
#, c-format
msgid ""
"rename involves overwriting `%s' with\n"
"  different file `%s', not allowed"
msgstr ""
"若進行更名，將會以另一個檔案 `%2$s'\n"
"  蓋過 `%1$s'，因而不可進行"

#: src/divertcmd.c:222 utils/update-alternatives.c:1368
#, fuzzy, c-format
msgid "unable to create file '%s'"
msgstr "無法開啟來源檔 `%.250s'"

#: src/divertcmd.c:227
#, fuzzy, c-format
#| msgid "cannot stat new name `%s': %s"
msgid "cannot copy '%s' to '%s': %s"
msgstr "無法取得新名稱 `%s' 的資訊：%s"

#: src/divertcmd.c:239
#, fuzzy, c-format
#| msgid "cannot stat new name `%s': %s"
msgid "cannot rename '%s' to '%s'"
msgstr "無法取得新名稱 `%s' 的資訊：%s"

#: src/divertcmd.c:252
#, fuzzy, c-format
#| msgid "rename: remove duplicate old link `%s': %s"
msgid "rename: remove duplicate old link '%s'"
msgstr "更名：移除重複的舊連結 `%s'：%s"

#: src/divertcmd.c:262
#, fuzzy, c-format
#| msgid "unable to open source file `%.250s'"
msgid "unable to remove copied source file '%s'"
msgstr "無法開啟來源檔 `%.250s'"

#: src/divertcmd.c:271 src/divertcmd.c:735
#, c-format
msgid "filename \"%s\" is not absolute"
msgstr "檔名 \"%s\" 不是唯一的"

#: src/divertcmd.c:273 src/statcmd.c:230
msgid "file may not contain newlines"
msgstr "檔案不該包含換行符號"

#: src/divertcmd.c:293
#, fuzzy, c-format
#| msgid "local diversion to: %s\n"
msgid "local diversion of %s"
msgstr "自行抽換，至：%s\n"

#: src/divertcmd.c:295
#, fuzzy, c-format
#| msgid "local diversion to: %s\n"
msgid "local diversion of %s to %s"
msgstr "自行抽換，至：%s\n"

#: src/divertcmd.c:299
#, fuzzy, c-format
#| msgid "diversion by %s to: %s\n"
msgid "diversion of %s by %s"
msgstr "由 %s 所抽換，至：%s\n"

#: src/divertcmd.c:302
#, fuzzy, c-format
#| msgid "diversion by %s to: %s\n"
msgid "diversion of %s to %s by %s"
msgstr "由 %s 所抽換，至：%s\n"

#: src/divertcmd.c:318
#, fuzzy, c-format
#| msgid "local diversion to: %s\n"
msgid "any diversion of %s"
msgstr "自行抽換，至：%s\n"

#: src/divertcmd.c:320
#, fuzzy, c-format
#| msgid "diversion by %s to: %s\n"
msgid "any diversion of %s to %s"
msgstr "由 %s 所抽換，至：%s\n"

#: src/divertcmd.c:425 src/divertcmd.c:557 src/divertcmd.c:675
#: src/divertcmd.c:697 src/statcmd.c:271
#, c-format
msgid "--%s needs a single argument"
msgstr "--%s 需要一個參數"

#: src/divertcmd.c:434
msgid "Cannot divert directories"
msgstr "無法抽換目錄"

#: src/divertcmd.c:447
#, fuzzy, c-format
msgid "cannot divert file '%s' to itself"
msgstr "無法抽換目錄"

#: src/divertcmd.c:467
#, fuzzy, c-format
#| msgid "Leaving `%s'"
msgid "Leaving '%s'\n"
msgstr "離開 `%s'"

#: src/divertcmd.c:472
#, c-format
msgid "`%s' clashes with `%s'"
msgstr "`%s' 和 `%s' 相衝突"

#: src/divertcmd.c:495
#, fuzzy, c-format
#| msgid "Adding `%s'"
msgid "Adding '%s'\n"
msgstr "增加 `%s'"

#: src/divertcmd.c:501
#, fuzzy, c-format
msgid "Ignoring request to rename file '%s' owned by diverting package '%s'\n"
msgstr "dpkg - 警告：忽略了移除 %.250s 的要求，因為它並沒有被安裝。\n"

#: src/divertcmd.c:566
#, fuzzy, c-format
#| msgid "No diversion `%s', none removed"
msgid "No diversion '%s', none removed.\n"
msgstr "無抽換項目 `%s'，無可刪除"

#: src/divertcmd.c:581
#, c-format
msgid ""
"mismatch on divert-to\n"
"  when removing `%s'\n"
"  found `%s'"
msgstr ""
"<抽換名稱> 不符，\n"
"  在移除 `%s' 時\n"
"  發現 `%s'"

#: src/divertcmd.c:588
#, c-format
msgid ""
"mismatch on package\n"
"  when removing `%s'\n"
"  found `%s'"
msgstr ""
"<套件> 不符，\n"
"  在移除 `%s' 時\n"
"  發現 `%s'"

#: src/divertcmd.c:598
#, fuzzy, c-format
msgid "Ignoring request to remove shared diversion '%s'.\n"
msgstr "dpkg - 警告：忽略了移除 %.250s 的要求，因為它並沒有被安裝。\n"

#: src/divertcmd.c:604
#, fuzzy, c-format
#| msgid "Removing `%s'"
msgid "Removing '%s'\n"
msgstr "正在刪除 `%s'"

#: src/divertcmd.c:726
msgid "package may not contain newlines"
msgstr "<套件> 不該包含換行符號"

#: src/divertcmd.c:737
msgid "divert-to may not contain newlines"
msgstr "<抽換名稱> 不該包含換行符號"

#: src/divertdb.c:64
msgid "failed to open diversions file"
msgstr "無法開啟抽換檔"

#: src/divertdb.c:71
msgid "failed to fstat previous diversions file"
msgstr "無法 fstat 原有的抽換檔"

#: src/divertdb.c:73
msgid "failed to fstat diversions file"
msgstr "無法 fstat 抽換檔"

#: src/divertdb.c:114
#, c-format
msgid "conflicting diversions involving `%.250s' or `%.250s'"
msgstr "抽換衝突，涉入其中的有 `%.250s' 及 `%.250s'"

#: src/enquiry.c:98
msgid ""
"The following packages are in a mess due to serious problems during\n"
"installation.  They must be reinstalled for them (and any packages\n"
"that depend on them) to function properly:\n"
msgstr ""
"下列套件現在正處於極度紊亂的狀態，因為在安裝過程中發生了嚴重的問題。\n"
"要讓它們能正常運作，您必須重新安裝它們（以及所有相依於它們的套件）：\n"

#: src/enquiry.c:105
msgid ""
"The following packages have been unpacked but not yet configured.\n"
"They must be configured using dpkg --configure or the configure\n"
"menu option in dselect for them to work:\n"
msgstr ""
"下列套件已經被解開，但是尚未進行設定。要讓它們能正常運作，\n"
"您必須使用 dpkg --configure 或者 dselect 選單中的 configure 項目：\n"

#: src/enquiry.c:112
msgid ""
"The following packages are only half configured, probably due to problems\n"
"configuring them the first time.  The configuration should be retried using\n"
"dpkg --configure <package> or the configure menu option in dselect:\n"
msgstr ""
"下列套件只完成一半的設定，這也許是因為它們在第一次設定時出了問題。\n"
"可使用 dpkg --configure <套件名> 或者用 dselect 選單中的 configure 項目來\n"
"試著重新設定套件：\n"

#: src/enquiry.c:119
msgid ""
"The following packages are only half installed, due to problems during\n"
"installation.  The installation can probably be completed by retrying it;\n"
"the packages can be removed using dselect or dpkg --remove:\n"
msgstr ""
"下列套件只完成一半安裝，因為安裝時出了問題。再試一次應該就可以完成安裝；\n"
"或使用 dselect 或 dpkg --remove 可以將其移除：\n"

#: src/enquiry.c:126
msgid ""
"The following packages are awaiting processing of triggers that they\n"
"have activated in other packages.  This processing can be requested using\n"
"dselect or dpkg --configure --pending (or dpkg --triggers-only):\n"
msgstr ""
"以下套件正要執行被其它套件所啟動的觸發程式。\n"
"可以用 dselect 或 dpkg --configure --pending（或 dpkg --triggers-only）\n"
"來要求執行這個動作。\n"

#: src/enquiry.c:133
msgid ""
"The following packages have been triggered, but the trigger processing\n"
"has not yet been done.  Trigger processing can be requested using\n"
"dselect or dpkg --configure --pending (or dpkg --triggers-only):\n"
msgstr ""
"以下套件的觸發程式已被呼叫，但觸發程式的處理作業尚未結束。\n"
"可以用 dselect 或 dpkg --configure --pending（或 dpkg --triggers-only）\n"
"來要求執行觸發程式。\n"

#: src/enquiry.c:140
msgid ""
"The following packages are missing the list control file in the\n"
"database, they need to be reinstalled:\n"
msgstr ""

#: src/enquiry.c:146
msgid ""
"The following packages are missing the md5sums control file in the\n"
"database, they need to be reinstalled:\n"
msgstr ""

#: src/enquiry.c:151
msgid "The following packages do not have an architecture:\n"
msgstr ""

#: src/enquiry.c:155
msgid "The following packages have an illegal architecture:\n"
msgstr ""

#: src/enquiry.c:160
msgid ""
"The following packages have an unknown foreign architecture, which will\n"
"cause dependency issues on front-ends. This can be fixed by registering\n"
"the foreign architecture with dpkg --add-architecture:\n"
msgstr ""

#: src/enquiry.c:189 src/enquiry.c:263 src/enquiry.c:348 src/enquiry.c:437
#: src/enquiry.c:537 src/enquiry.c:560 src/select.c:117 src/select.c:193
#: src/trigcmd.c:228 src/update.c:48 src/update.c:110 dpkg-split/queue.c:241
#, c-format
msgid "--%s takes no arguments"
msgstr "--%s 不需任何參數"

#: src/enquiry.c:204
msgid ""
"Another process has locked the database for writing, and might currently be\n"
"modifying it, some of the following problems might just be due to that.\n"
msgstr ""

#: src/enquiry.c:243
#, fuzzy
#| msgid "<unknown>"
msgctxt "section"
msgid "<unknown>"
msgstr "<未知>"

#: src/enquiry.c:303
#, c-format
msgid " %d in %s: "
msgstr " %d 屬於 %s："

#: src/enquiry.c:322
#, fuzzy, c-format
#| msgid " %d packages, from the following sections:"
msgid " %d package, from the following section:"
msgid_plural " %d packages, from the following sections:"
msgstr[0] " %d 個套件，屬於以下類別："
msgstr[1] " %d 個套件，屬於以下類別："

#: src/enquiry.c:361
#, fuzzy, c-format
msgid ""
"Version of dpkg with working %s support not yet configured.\n"
" Please use 'dpkg --configure dpkg', and then try again.\n"
msgstr ""
"該版本的 dpkg 可支援 epoch，但尚未設定。\n"
" 請執行 `dpkg --configure dpkg' ，然後再試一次。\n"

#: src/enquiry.c:366
#, fuzzy, c-format
msgid "dpkg not recorded as installed, cannot check for %s support!\n"
msgstr "記錄中顯示，dpkg 並沒有被安裝，因而不能斷定它是否支援 epoch！\n"

#: src/enquiry.c:377
msgid "Pre-Depends field"
msgstr ""

#: src/enquiry.c:385
msgid "epoch"
msgstr ""

#: src/enquiry.c:393
msgid "long filenames"
msgstr ""

#: src/enquiry.c:402
msgid "multiple Conflicts and Replaces"
msgstr ""

#: src/enquiry.c:410
msgid "multi-arch"
msgstr ""

#: src/enquiry.c:510
#, fuzzy, c-format
#| msgid ""
#| "dpkg: cannot see how to satisfy pre-dependency:\n"
#| " %s\n"
msgid ""
"cannot see how to satisfy pre-dependency:\n"
" %s"
msgstr ""
"dpkg：無法推測該如何滿足預先相依關係：\n"
" %s\n"

#: src/enquiry.c:511
#, c-format
msgid "cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)"
msgstr "無法滿足 %.250s 的預先相依關係（應 %.250s 之要求）"

#: src/enquiry.c:549
#, fuzzy, c-format
msgid "obsolete option '--%s'; please use '--%s' instead"
msgstr "警告：已廢棄選項 `--%s'\n"

#: src/enquiry.c:618
msgid ""
"--compare-versions takes three arguments: <version> <relation> <version>"
msgstr "--compare-version 需有三個參數：<版本號> <比較關係> <版本號>"

#: src/enquiry.c:623
msgid "--compare-versions bad relation"
msgstr "--compare-versions 比較關係不適切"

#: src/enquiry.c:628 src/enquiry.c:630 src/enquiry.c:639 src/enquiry.c:641
#, fuzzy, c-format
msgid "version '%s' has bad syntax: %s"
msgstr "dpkg：版本 '%s' 的語法不正確：%s\n"

#: src/errors.c:60
#, fuzzy, c-format
#| msgid ""
#| "%s: error processing %s (--%s):\n"
#| " %s\n"
msgid ""
"error processing %s (--%s):\n"
" %s"
msgstr ""
"%s：在處理 %s (--%s) 時發生錯誤：\n"
" %s\n"

#: src/errors.c:66
#, fuzzy, c-format
#| msgid ""
#| "dpkg: failed to allocate memory for new entry in list of failed packages."
msgid "failed to allocate memory for new entry in list of failed packages: %s"
msgstr "dpkg：在新增項目至失敗套件列表時，無法配置記憶體。"

#: src/errors.c:77
#, fuzzy
#| msgid "dpkg: too many errors, stopping\n"
msgid "too many errors, stopping"
msgstr "dpkg：出現過多錯誤，正在終止\n"

#: src/errors.c:85
msgid "Errors were encountered while processing:\n"
msgstr "在處理時有錯誤發生：\n"

#: src/errors.c:92
msgid "Processing was halted because there were too many errors.\n"
msgstr "由於出現了太多錯誤，處理作業被中斷了。\n"

#: src/errors.c:103
#, fuzzy, c-format
#| msgid "Package %s was on hold, processing it anyway as you requested\n"
msgid "package %s was on hold, processing it anyway as you requested"
msgstr "套件 %s 原本設定為保留 (hold)，應您的要求強制繼續處理\n"

#: src/errors.c:107
#, c-format
msgid ""
"Package %s is on hold, not touching it.  Use --force-hold to override.\n"
msgstr ""
"套件 %s 被設定為保留 (hold)，因而不會去變動它。請使用 --force-hold 選項來忽略"
"該設定。\n"

#: src/errors.c:117
#, fuzzy
msgid "overriding problem because --force enabled:"
msgstr ""
"dpkg - 警告，由於使用了 --force 選項，忽略問題的存在：\n"
" "

#: src/filesdb.c:270
#, c-format
msgid "unable to open files list file for package `%.250s'"
msgstr "無法開啟套件 `%.250s' 的檔案列表檔"

#: src/filesdb.c:275
#, fuzzy, c-format
msgid ""
"files list file for package '%.250s' missing; assuming package has no files "
"currently installed"
msgstr ""
"dpkg：嚴重警告：無法找到套件 `%.250s' 的檔案列表檔，假定該套件目前沒有任何檔"
"案被安裝在系統裡。\n"

#: src/filesdb.c:287
#, fuzzy, c-format
msgid "unable to stat files list file for package '%.250s'"
msgstr "無法開啟套件 `%.250s' 的檔案列表檔"

#: src/filesdb.c:291
#, fuzzy, c-format
msgid "files list for package '%.250s' is not a regular file"
msgstr "套件 `%.250s' 的檔案列表檔含有空的檔案名稱"

#: src/filesdb.c:299
#, fuzzy, c-format
#| msgid "files list for package `%.250s'"
msgid "reading files list for package '%.250s'"
msgstr "套件 `%.250s' 的檔案列表檔"

#: src/filesdb.c:308
#, fuzzy, c-format
msgid "files list file for package '%.250s' is missing final newline"
msgstr "套件 `%.250s' 的檔案列表檔含有空的檔案名稱"

#: src/filesdb.c:316
#, c-format
msgid "files list file for package `%.250s' contains empty filename"
msgstr "套件 `%.250s' 的檔案列表檔含有空的檔案名稱"

#: src/filesdb.c:327
#, c-format
msgid "error closing files list file for package `%.250s'"
msgstr "在關閉套件 `%.250s' 的檔案列表檔時發生錯誤"

#: src/filesdb.c:439
msgid "(Reading database ... "
msgstr "（正在讀取資料庫 ... "

#: src/filesdb.c:460
#, fuzzy, c-format
#| msgid "%d files and directories currently installed.)\n"
msgid "%d file or directory currently installed.)\n"
msgid_plural "%d files and directories currently installed.)\n"
msgstr[0] "系統目前共安裝了 %d 個檔案和目錄。）\n"
msgstr[1] "系統目前共安裝了 %d 個檔案和目錄。）\n"

#: src/help.c:44
msgid "not installed"
msgstr "未安裝"

#: src/help.c:45
msgid "not installed but configs remain"
msgstr "未被安裝，但卻留有設定檔"

#: src/help.c:46
msgid "broken due to failed removal or installation"
msgstr "由於移除或安裝失敗而毀損了"

#: src/help.c:47
msgid "unpacked but not configured"
msgstr "已被解開，但尚未設定"

#: src/help.c:48
msgid "broken due to postinst failure"
msgstr "由於 postinst 出錯而毀損了"

#: src/help.c:49
msgid "awaiting trigger processing by another package"
msgstr "正要執行由另一個套件所進行的觸發程式"

#: src/help.c:50
msgid "triggered"
msgstr "已觸發"

#: src/help.c:51
msgid "installed"
msgstr "已安裝完畢"

#: src/help.c:106
#, fuzzy
msgid "PATH is not set"
msgstr "dpkg - 錯誤：沒有設定 PATH。\n"

#: src/help.c:128
#, fuzzy, c-format
msgid "'%s' not found in PATH or not executable"
msgstr "dpkg：在 PATH 中找不到 `%s'。\n"

#: src/help.c:137
#, fuzzy, c-format
msgid ""
"%d expected program not found in PATH or not executable\n"
"%s"
msgid_plural ""
"%d expected programs not found in PATH or not executable\n"
"%s"
msgstr[0] "dpkg：在 PATH 中找不到 `%s'。\n"
msgstr[1] "dpkg：在 PATH 中找不到 `%s'。\n"

#: src/help.c:140
#, fuzzy
msgid ""
"Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin"
msgstr ""
"共有 %d 個會用到的程式未在 PATH 中找到。\n"
"提示：root 的 PATH 通常會包含了 /usr/local/sbin、/usr/sbin 和 /sbin。"

#: src/help.c:357
#, fuzzy, c-format
msgid "unable to securely remove '%.255s'"
msgstr "無法建立 `%.255s'"

#: src/help.c:362 dpkg-deb/info.c:65 dpkg-deb/info.c:67
msgid "rm command for cleanup"
msgstr ""

#: src/infodb-access.c:53
#, c-format
msgid "unable to check existence of `%.250s'"
msgstr "無法判斷 `%.250s' 是否存在"

#: src/infodb-access.c:79 src/infodb-upgrade.c:93
msgid "cannot read info directory"
msgstr "無法讀取 info 目錄"

#: src/infodb-format.c:52 src/processarc.c:697
#, c-format
msgid "error trying to open %.250s"
msgstr "在試圖開啟 %.250s 時發生錯誤"

#: src/infodb-format.c:56
#, fuzzy, c-format
msgid "corrupt info database format file '%s'"
msgstr "無法開啟來源檔 `%.250s'"

#: src/infodb-upgrade.c:123
#, fuzzy, c-format
#| msgid "conffile `%.250s' does not appear in package"
msgid "Info file %s/%s not associated to any package"
msgstr "在套件裡沒有找到 conffile `%.250s'"

#: src/infodb-upgrade.c:183
#, fuzzy, c-format
#| msgid "error writing `%s'"
msgid "error while writing '%s'"
msgstr "`%s' 寫入錯誤"

#: src/main.c:62
#, c-format
msgid "Debian `%s' package management program version %s.\n"
msgstr "Debian `%s' 套件管理程式版本%s。\n"

#: src/main.c:87
#, fuzzy, c-format
#| msgid ""
#| "Commands:\n"
#| "  -i|--install       <.deb file name> ... | -R|--recursive "
#| "<directory> ...\n"
#| "  --unpack           <.deb file name> ... | -R|--recursive "
#| "<directory> ...\n"
#| "  -A|--record-avail  <.deb file name> ... | -R|--recursive "
#| "<directory> ...\n"
#| "  --configure        <package> ... | -a|--pending\n"
#| "  --triggers-only    <package> ... | -a|--pending\n"
#| "  -r|--remove        <package> ... | -a|--pending\n"
#| "  -P|--purge         <package> ... | -a|--pending\n"
#| "  --get-selections [<pattern> ...] Get list of selections to stdout.\n"
#| "  --set-selections                 Set package selections from stdin.\n"
#| "  --clear-selections               Deselect every non-essential package.\n"
#| "  --update-avail <Packages-file>   Replace available packages info.\n"
#| "  --merge-avail <Packages-file>    Merge with info from file.\n"
#| "  --clear-avail                    Erase existing available info.\n"
#| "  --forget-old-unavail             Forget uninstalled unavailable pkgs.\n"
#| "  -s|--status <package> ...        Display package status details.\n"
#| "  -p|--print-avail <package> ...   Display available version details.\n"
#| "  -L|--listfiles <package> ...     List files `owned' by package(s).\n"
#| "  -l|--list [<pattern> ...]        List packages concisely.\n"
#| "  -S|--search <pattern> ...        Find package(s) owning file(s).\n"
#| "  -C|--audit                       Check for broken package(s).\n"
#| "  --print-architecture             Print dpkg architecture.\n"
#| "  --compare-versions <a> <op> <b>  Compare version numbers - see below.\n"
#| "  --force-help                     Show help on forcing.\n"
#| "  -Dh|--debug=help                 Show help on debugging.\n"
#| "\n"
msgid ""
"Commands:\n"
"  -i|--install       <.deb file name> ... | -R|--recursive <directory> ...\n"
"  --unpack           <.deb file name> ... | -R|--recursive <directory> ...\n"
"  -A|--record-avail  <.deb file name> ... | -R|--recursive <directory> ...\n"
"  --configure        <package> ... | -a|--pending\n"
"  --triggers-only    <package> ... | -a|--pending\n"
"  -r|--remove        <package> ... | -a|--pending\n"
"  -P|--purge         <package> ... | -a|--pending\n"
"  --get-selections [<pattern> ...] Get list of selections to stdout.\n"
"  --set-selections                 Set package selections from stdin.\n"
"  --clear-selections               Deselect every non-essential package.\n"
"  --update-avail <Packages-file>   Replace available packages info.\n"
"  --merge-avail <Packages-file>    Merge with info from file.\n"
"  --clear-avail                    Erase existing available info.\n"
"  --forget-old-unavail             Forget uninstalled unavailable pkgs.\n"
"  -s|--status <package> ...        Display package status details.\n"
"  -p|--print-avail <package> ...   Display available version details.\n"
"  -L|--listfiles <package> ...     List files `owned' by package(s).\n"
"  -l|--list [<pattern> ...]        List packages concisely.\n"
"  -S|--search <pattern> ...        Find package(s) owning file(s).\n"
"  -C|--audit                       Check for broken package(s).\n"
"  --add-architecture <arch>        Add <arch> to the list of architectures.\n"
"  --remove-architecture <arch>     Remove <arch> from the list of "
"architectures.\n"
"  --print-architecture             Print dpkg architecture.\n"
"  --print-foreign-architectures    Print allowed foreign architectures.\n"
"  --compare-versions <a> <op> <b>  Compare version numbers - see below.\n"
"  --force-help                     Show help on forcing.\n"
"  -Dh|--debug=help                 Show help on debugging.\n"
"\n"
msgstr ""
"指令：\n"
"  -i|--install       <.deb 檔> ... | -R|--recursive <目錄> ...\n"
"  --unpack           <.deb 檔> ... | -R|--recursive <目錄> ...\n"
"  -A|--record-avail  <.deb 檔> ... | -R|--recursive <目錄> ...\n"
"  --configure        <套件> ...    | -a|--pending\n"
"  --triggers-only    <套件> ...    | -a|--pending\n"
"  -r|--remove        <套件> ...    | -a|--pending\n"
"  -P|--purge         <套件> ...    | -a|--pending\n"
"  --get-selections [<表達式> ...]  取得選擇列表至 stdout。\n"
"  --set-selections                 從 stdin 取得套件選擇列表。\n"
"  --clear-selections               取消選擇所有的非基本套件。\n"
"  --update-avail <套件檔>          取代現有套件的資訊。\n"
"  --merge-avail <套件檔>           以檔案內的 info 資訊進行合併。\n"
"  --clear-avail                    清除現有的資訊。\n"
"  --forget-old-unavail             清除已移除且無法再安裝的套件。\n"
"  -s|--status <套件> ...           顯示套件的詳細狀態。\n"
"  -p|--print-avail <套件> ...      顯示可用版本的詳細資訊。\n"
"  -L|--listfiles <套件> ...        列出 `屬於' 該套件的所有檔案。\n"
"  -l|--list [<表達式> ...]         簡述套件狀態。\n"
"  -S|--search <表達式> ...         查詢某些檔案是屬於哪些套件。\n"
"  -C|--audit                       檢查已損毀的套件。\n"
"  --print-architecture             顯示 dpkg 硬體平台。\n"
"  --compare-versions <a> <op> <b>  比較版本 - 請參閱下文。\n"
"  --force-help                     顯示強制選項的說明。\n"
"  -Dh|--debug=help                 顯示偵錯模式的說明。\n"
"\n"

#: src/main.c:118 src/querycmd.c:794 src/trigcmd.c:79 dpkg-deb/main.c:90
#: dpkg-split/main.c:79
#, fuzzy, c-format
msgid ""
"  -?, --help                       Show this help message.\n"
"      --version                    Show the version.\n"
"\n"
msgstr ""
"  -h|--help                        顯示這個說明訊息。\n"
"  --version                        顯示版本資訊。\n"
"  --license|--licence              顯示著作版權條文。\n"
"\n"

#: src/main.c:123
#, c-format
msgid ""
"Use dpkg -b|--build|-c|--contents|-e|--control|-I|--info|-f|--field|\n"
" -x|--extract|-X|--vextract|--fsys-tarfile  on archives (type %s --help).\n"
"\n"
msgstr ""
"使用 dpkg -b|--build|-c|--contents|-e|--control|-I|--info|-f|--field|\n"
" -x|--extract|-X|--vextract|--fsys-tarfile 於套件檔上（鍵入 %s --help）。\n"
"\n"

#: src/main.c:128
#, fuzzy, c-format
#| msgid ""
#| "For internal use: dpkg --assert-support-predepends | --predep-package |\n"
#| "  --assert-working-epoch | --assert-long-filenames | --assert-multi-"
#| "conrep.\n"
#| "\n"
msgid ""
"For internal use: dpkg --assert-support-predepends | --predep-package |\n"
"  --assert-working-epoch | --assert-long-filenames | --assert-multi-conrep "
"|\n"
"  --assert-multi-arch.\n"
"\n"
msgstr ""
"內部使用：dpkg --assert-support-predepends | --predep-package |\n"
"  --assert-working-epoch | --assert-long-filenames | --assert-multi-"
"conrep。\n"
"\n"

#: src/main.c:134
#, fuzzy, c-format
#| msgid ""
#| "Options:\n"
#| "  --admindir=<directory>     Use <directory> instead of %s.\n"
#| "  --root=<directory>         Install on a different root directory.\n"
#| "  --instdir=<directory>      Change installation dir without changing "
#| "admin dir.\n"
#| "  -O|--selected-only         Skip packages not selected for install/"
#| "upgrade.\n"
#| "  -E|--skip-same-version     Skip packages whose same version is "
#| "installed.\n"
#| "  -G|--refuse-downgrade      Skip packages with earlier version than "
#| "installed.\n"
#| "  -B|--auto-deconfigure      Install even if it would break some other "
#| "package.\n"
#| "  --[no-]triggers            Skip or force consequential trigger "
#| "processing.\n"
#| "  --no-debsig                Do not try to verify package signatures.\n"
#| "  --no-act|--dry-run|--simulate\n"
#| "                             Just say what we would do - don't do it.\n"
#| "  -D|--debug=<octal>         Enable debugging (see -Dhelp or --"
#| "debug=help).\n"
#| "  --status-fd <n>            Send status change updates to file "
#| "descriptor <n>.\n"
#| "  --log=<filename>           Log status changes and actions to "
#| "<filename>.\n"
#| "  --ignore-depends=<package>,...\n"
#| "                             Ignore dependencies involving <package>.\n"
#| "  --force-...                Override problems (see --force-help).\n"
#| "  --no-force-...|--refuse-...\n"
#| "                             Stop when problems encountered.\n"
#| "  --abort-after <n>          Abort after encountering <n> errors.\n"
#| "\n"
msgid ""
"Options:\n"
"  --admindir=<directory>     Use <directory> instead of %s.\n"
"  --root=<directory>         Install on a different root directory.\n"
"  --instdir=<directory>      Change installation dir without changing admin "
"dir.\n"
"  --path-exclude=<pattern>   Do not install paths which match a shell "
"pattern.\n"
"  --path-include=<pattern>   Re-include a pattern after a previous "
"exclusion.\n"
"  -O|--selected-only         Skip packages not selected for install/"
"upgrade.\n"
"  -E|--skip-same-version     Skip packages whose same version is installed.\n"
"  -G|--refuse-downgrade      Skip packages with earlier version than "
"installed.\n"
"  -B|--auto-deconfigure      Install even if it would break some other "
"package.\n"
"  --[no-]triggers            Skip or force consequential trigger "
"processing.\n"
"  --no-debsig                Do not try to verify package signatures.\n"
"  --no-act|--dry-run|--simulate\n"
"                             Just say what we would do - don't do it.\n"
"  -D|--debug=<octal>         Enable debugging (see -Dhelp or --debug=help).\n"
"  --status-fd <n>            Send status change updates to file descriptor "
"<n>.\n"
"  --status-logger=<command>  Send status change updates to <command>'s "
"stdin.\n"
"  --log=<filename>           Log status changes and actions to <filename>.\n"
"  --ignore-depends=<package>,...\n"
"                             Ignore dependencies involving <package>.\n"
"  --force-...                Override problems (see --force-help).\n"
"  --no-force-...|--refuse-...\n"
"                             Stop when problems encountered.\n"
"  --abort-after <n>          Abort after encountering <n> errors.\n"
"\n"
msgstr ""
"選項：\n"
"  --admindir=<目錄>          使用 <目錄> 取代 %s。\n"
"  --root=<目錄>              安裝在另一個不同的 root 目錄。\n"
"  --instdir=<目錄>           在不變更 admin dir 的情況上變更安裝路徑。\n"
"  -O|--selected-only         略過未被選擇為要進行安裝/升級的套件。\n"
"  -E|--skip-same-version     略過和已安裝套件相同的版本。\n"
"  -G|--refuse-downgrade      略過比已安裝套件更舊的版本。\n"
"  -B|--auto-deconfigure      即使會損毀其它套件也要進行安裝。\n"
"  --[no-]triggers            略過或強制進行伴隨而來的觸發程式。\n"
"  --no-debsig                不試著去驗証套件簽章。\n"
"  --no-act|--dry-run|--simulate\n"
"                             只顯示將要進行的動作 - 不實際進行。\n"
"  -D|--debug=<八進制數字>    啟用除錯機機（請參閱 Dhelp 或 --debug=help）。\n"
"  --status-fd <n>            傳送狀態的變更情況至檔案重導 <n>。\n"
"  --log=<檔名>               記錄狀態的變更及動作至 <檔名>。\n"
"  --ignore-depends=<套件>,...\n"
"                             忽略 <套件> 的相依關係。\n"
"  --force-...                無視問題的發生（請參閱 --force-help）。\n"
"  --no-force-...|--refuse-...\n"
"                             當發生問題時中止。\n"
"  --abort-after <n>          在發生 <n> 個錯誤後中止。\n"
"\n"

#: src/main.c:161
#, c-format
msgid ""
"Comparison operators for --compare-versions are:\n"
"  lt le eq ne ge gt       (treat empty version as earlier than any "
"version);\n"
"  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);\n"
"  < << <= = >= >> >       (only for compatibility with control file "
"syntax).\n"
"\n"
msgstr ""
"--compare-versions 的比較運算子：\n"
"  lt le eq ne ge gt       （將無版本視為比任何版本都舊）；\n"
"  lt-nl le-nl ge-nl gt-nl （將無版本視為比任何版本都新）；\n"
"  < << <= = >= >> >       （僅為了能相容於 control 檔的語法）\n"
"\n"

#: src/main.c:168
#, c-format
msgid "Use `dselect' or `aptitude' for user-friendly package management.\n"
msgstr "使用 `dselect' 或 `aptitude' 等介面親和的套件管理程式。\n"

#: src/main.c:176
#, fuzzy
msgid ""
"Type dpkg --help for help about installing and deinstalling packages [*];\n"
"Use `dselect' or `aptitude' for user-friendly package management;\n"
"Type dpkg -Dhelp for a list of dpkg debug flag values;\n"
"Type dpkg --force-help for a list of forcing options;\n"
"Type dpkg-deb --help for help about manipulating *.deb files;\n"
"\n"
"Options marked [*] produce a lot of output - pipe it through `less' or "
"`more' !"
msgstr ""
"輸入 dpkg --help 以取得安裝和移除套件的說明 [*]﹔\n"
"使用 `dselect' 或 `aptitude' 以使用介面親和的套件管理程式﹔\n"
"輸入 dpkg -Dhelp 以取得 dpkg 除錯設定值的列表﹔\n"
"輸入 dpkg --force-help 以取得強制選項的列表﹔\n"
"輸入 dpkg-deb --help 以取得如何操作 *.deb 檔的說明﹔\n"
"輸入 dpkg --licence 以取得有版權授權和無擔保的說明 (GNU GPL) [*]。\n"
"\n"
"標示有 [*] 的選項將會輸出大量文字 - 用管線輸出至 `less' 或 `more'！"

#: src/main.c:225
msgid "Set all force options"
msgstr ""

#: src/main.c:227
msgid "Replace a package with a lower version"
msgstr ""

#: src/main.c:229
msgid "Configure any package which may help this one"
msgstr ""

#: src/main.c:231
msgid "Process incidental packages even when on hold"
msgstr ""

#: src/main.c:233
msgid "Try to (de)install things even when not root"
msgstr ""

#: src/main.c:235
msgid "PATH is missing important programs, problems likely"
msgstr ""

#: src/main.c:237
msgid "Install a package even if it fails authenticity check"
msgstr ""

#: src/main.c:239
msgid "Process even packages with wrong versions"
msgstr ""

#: src/main.c:241
msgid "Overwrite a file from one package with another"
msgstr ""

#: src/main.c:243
msgid "Overwrite a diverted file with an undiverted version"
msgstr ""

#: src/main.c:245
msgid "Overwrite one package's directory with another's file"
msgstr ""

#: src/main.c:247
msgid "Do not perform safe I/O operations when unpacking"
msgstr ""

#: src/main.c:249
msgid "Always use the new config files, don't prompt"
msgstr ""

#: src/main.c:251
msgid "Always use the old config files, don't prompt"
msgstr ""

#: src/main.c:254
msgid ""
"Use the default option for new config files if one\n"
"                         is available, don't prompt. If no default can be "
"found,\n"
"                         you will be prompted unless one of the confold or\n"
"                         confnew options is also given"
msgstr ""

#: src/main.c:259
msgid "Always install missing config files"
msgstr ""

#: src/main.c:261
msgid "Offer to replace config files with no new versions"
msgstr ""

#: src/main.c:263
msgid "Process even packages with wrong or no architecture"
msgstr ""

#: src/main.c:265
msgid "Install even if it would break another package"
msgstr ""

#: src/main.c:267
msgid "Allow installation of conflicting packages"
msgstr ""

#: src/main.c:269
#, fuzzy
#| msgid "dependency problems - not removing"
msgid "Turn all dependency problems into warnings"
msgstr "相依問題 - 不進行移除"

#: src/main.c:271
#, fuzzy
#| msgid "dependency problems - not removing"
msgid "Turn dependency version problems into warnings"
msgstr "相依問題 - 不進行移除"

#: src/main.c:273
msgid "Remove packages which require installation"
msgstr ""

#: src/main.c:275
msgid "Remove an essential package"
msgstr ""

#: src/main.c:287
msgid "Generally helpful progress information"
msgstr ""

#: src/main.c:288
#, fuzzy
msgid "Invocation and status of maintainer scripts"
msgstr "無法在 maint script 上進行 setenv"

#: src/main.c:289
msgid "Output for each file processed"
msgstr ""

#: src/main.c:290
msgid "Lots of output for each file processed"
msgstr ""

#: src/main.c:291
#, fuzzy
#| msgid "read error in configuration file `%.255s'"
msgid "Output for each configuration file"
msgstr "設定檔 `%.255s' 讀取錯誤"

#: src/main.c:292
msgid "Lots of output for each configuration file"
msgstr ""

#: src/main.c:293
msgid "Dependencies and conflicts"
msgstr ""

#: src/main.c:294
msgid "Lots of dependencies/conflicts output"
msgstr ""

#: src/main.c:295
msgid "Trigger activation and processing"
msgstr ""

#: src/main.c:296
msgid "Lots of output regarding triggers"
msgstr ""

#: src/main.c:297
msgid "Silly amounts of output regarding triggers"
msgstr ""

#: src/main.c:298
msgid "Lots of drivel about eg the dpkg/info directory"
msgstr ""

#: src/main.c:299
msgid "Insane amounts of drivel"
msgstr ""

#: src/main.c:310
#, c-format
msgid ""
"%s debugging option, --debug=<octal> or -D<octal>:\n"
"\n"
" Number  Ref. in source   Description\n"
msgstr ""

#: src/main.c:317
#, c-format
msgid ""
"\n"
"Debugging options can be mixed using bitwise-or.\n"
"Note that the meanings and values are subject to change.\n"
msgstr ""

#: src/main.c:327
#, fuzzy, c-format
#| msgid "--debug requires an octal argument"
msgid "--%s requires a positive octal argument"
msgstr "--debug 需要一個八進制的參數"

#: src/main.c:355
#, fuzzy, c-format
#| msgid "null package name in --ignore-depends comma-separated list `%.250s'"
msgid "null package name in --%s comma-separated list '%.250s'"
msgstr "在 --ignore-depends 的逗號分隔列表 `%s' 中有的套件名稱是空的"

#: src/main.c:365 src/packages.c:114 src/querycmd.c:425 src/querycmd.c:670
#: src/querycmd.c:702 src/querycmd.c:739
#, fuzzy, c-format
#| msgid "--ignore-depends requires a legal package name. `%.250s' is not; %s"
msgid "--%s needs a valid package name but '%.250s' is not: %s"
msgstr "--ignore-depends 需要一個有效的套件名稱。而 `%.250s' 卻不是﹔%s"

#: src/main.c:383 src/main.c:394 src/main.c:737 dpkg-split/main.c:128
#, c-format
msgid "invalid integer for --%s: `%.250s'"
msgstr "--%s 所指定的數字無效：`%.250s'"

#: src/main.c:451
#, c-format
msgid "error executing hook '%s', exit code %d"
msgstr ""

#: src/main.c:478
msgid "status logger"
msgstr ""

#: src/main.c:493 src/main.c:523
#, fuzzy, c-format
#| msgid "--%s takes no arguments"
msgid "--%s takes one argument"
msgstr "--%s 不需任何參數"

#: src/main.c:503
#, c-format
msgid "architecture '%s' is illegal: %s"
msgstr ""

#: src/main.c:506
#, c-format
msgid "architecture '%s' is reserved and cannot be added"
msgstr ""

#: src/main.c:529
#, fuzzy, c-format
#| msgid "cannot remove file `%.250s'"
msgid "cannot remove non-foreign architecture '%s'"
msgstr "無法刪除檔案 `%.250s'"

#: src/main.c:540
#, c-format
msgid "removing architecture '%s' currently in use by database"
msgstr ""

#: src/main.c:543
#, c-format
msgid "cannot remove architecture '%s' currently in use by the database"
msgstr ""

#: src/main.c:565
#, c-format
msgid ""
"%s forcing options - control behaviour when problems found:\n"
"  warn but continue:  --force-<thing>,<thing>,...\n"
"  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...\n"
" Forcing things:\n"
msgstr ""

#: src/main.c:575
#, c-format
msgid ""
"\n"
"WARNING - use of options marked [!] can seriously damage your installation.\n"
"Forcing options marked [*] are enabled by default.\n"
msgstr ""

#: src/main.c:590
#, c-format
msgid "unknown force/refuse option `%.*s'"
msgstr "未知的 force/refuse 選項 `%.*s'"

#: src/main.c:599
#, fuzzy, c-format
msgid "obsolete force/refuse option '%s'\n"
msgstr "警告：已廢棄的 force/refuse 選項 `%s' \n"

#: src/main.c:733 dpkg-deb/info.c:333
#, fuzzy, c-format
#| msgid "--contents takes exactly one argument"
msgid "--%s takes exactly one argument"
msgstr "--contents 只需要一個參數"

#: src/main.c:739
#, c-format
msgid "couldn't open `%i' for stream"
msgstr "無法開啟 `%i' 以進行串流處理"

#: src/main.c:764
#, c-format
msgid "unexpected eof before end of line %d"
msgstr "在第 %d 行結束之前有預期之外的 eof"

#: src/main.c:807 src/main.c:829 src/querycmd.c:859 src/statcmd.c:360
#: dpkg-deb/main.c:223 dpkg-split/main.c:171
msgid "need an action option"
msgstr "欠缺操作選項"

#: src/main.c:835 src/script.c:112
#, fuzzy
msgid "unable to setenv for subprocesses"
msgstr "無法在 maint script 上進行 setenv"

#: src/packages.c:122
msgid ""
"you must specify packages by their own names, not by quoting the names of "
"the files they come in"
msgstr "您必須使用套件本身的名字，而不是直接引用完整的檔案名稱"

#: src/packages.c:144
#, c-format
msgid "--%s --pending does not take any non-option arguments"
msgstr "--%s --pending 不需任何不是選項的參數"

#: src/packages.c:149 src/querycmd.c:413 src/querycmd.c:656
#, c-format
msgid "--%s needs at least one package name argument"
msgstr "--%s 需要至少一個套件名稱作為參數"

#: src/packages.c:190
#, c-format
msgid "Package %s listed more than once, only processing once.\n"
msgstr "套件 %s 被列出多次，但只會被處理一次。\n"

#: src/packages.c:194
#, c-format
msgid ""
"More than one copy of package %s has been unpacked\n"
" in this run !  Only configuring it once.\n"
msgstr ""
"在此次執行中，同時解開了套件 %s 的多個副本！\n"
" 但只會設定一次。\n"

#: src/packages.c:244
#, c-format
msgid ""
"package %.250s is not ready for trigger processing\n"
" (current status `%.250s' with no pending triggers)"
msgstr ""
"套件 %.250s 還沒準備好要處理觸發程式\n"
" （目前的狀態為 `%.250s'，且沒有尚待進行的觸發程式）"

#: src/packages.c:346
#, c-format
msgid "  Package %s which provides %s is to be removed.\n"
msgstr "  提供了 %2$s 的套件 %1$s 即將被移除。\n"

#: src/packages.c:349
#, c-format
msgid "  Package %s is to be removed.\n"
msgstr "  即將移除套件 %s。\n"

#: src/packages.c:364
#, c-format
msgid "  Version of %s on system is %s.\n"
msgstr "  %s 在系統上的版本為 %s。\n"

#: src/packages.c:386
#, c-format
msgid "  Package %s which provides %s awaits trigger processing.\n"
msgstr "  提供了 %2$s 的套件 %1$s 正要執行觸發程式。\n"

#: src/packages.c:390
#, c-format
msgid "  Package %s awaits trigger processing.\n"
msgstr "  套件 %s 正要執行觸發程式。\n"

#: src/packages.c:419
#, fuzzy, c-format
#| msgid "dpkg: also configuring `%s' (required by `%s')\n"
msgid "also configuring '%s' (required by '%s')"
msgstr "dpkg：也同時設定 `%s'（此為 `%s' 所要求的）\n"

#: src/packages.c:428
#, c-format
msgid "  Package %s which provides %s is not configured yet.\n"
msgstr "  提供了 %2$s 的套件 %1$s 尚未設定。\n"

#: src/packages.c:431
#, c-format
msgid "  Package %s is not configured yet.\n"
msgstr "  %s 套件尚未設定。\n"

#: src/packages.c:442
#, c-format
msgid "  Package %s which provides %s is not installed.\n"
msgstr "  未曾安裝提供了 %2$s 的套件 %1$s。\n"

#: src/packages.c:445
#, c-format
msgid "  Package %s is not installed.\n"
msgstr "  未曾安裝套件 `%s'。\n"

#: src/packages.c:485
#, c-format
msgid " %s (%s) breaks %s and is %s.\n"
msgstr " %s（%s）損毀了 %s，且已 %s。\n"

#: src/packages.c:492
#, c-format
msgid "  %s (%s) provides %s.\n"
msgstr "  %s（%s）提供了 %s。\n"

#: src/packages.c:497
#, c-format
msgid "  Version of %s to be configured is %s.\n"
msgstr "  %s 要進行設定的版本是 %s。\n"

#: src/packages.c:635
msgid " depends on "
msgstr " 相依於 "

#: src/packages.c:641
msgid "; however:\n"
msgstr "﹔然而：\n"

#: src/processarc.c:75
#, c-format
msgid ".../%s"
msgstr ""

#: src/processarc.c:95
#, c-format
msgid "error ensuring `%.250s' doesn't exist"
msgstr "在確保檔案 `%.250s' 是否存在時發生錯誤"

#: src/processarc.c:103
msgid "split package reassembly"
msgstr ""

#: src/processarc.c:112
msgid "reassembled package file"
msgstr "重新組裝成的套件檔"

#: src/processarc.c:137
#, c-format
msgid "Authenticating %s ...\n"
msgstr "正在驗証 %s ...\n"

#: src/processarc.c:143
msgid "package signature verification"
msgstr ""

#: src/processarc.c:150
#, fuzzy, c-format
#| msgid "Verification on package %s failed!"
msgid "verification on package %s failed!"
msgstr "套件 %s 沒有通過驗証！"

#: src/processarc.c:152
#, fuzzy, c-format
#| msgid ""
#| "Verification on package %s failed,\n"
#| "but installing anyway as you requested.\n"
msgid ""
"verification on package %s failed; but installing anyway as you requested"
msgstr ""
"雖然套件 %s 未能通過驗証，\n"
"但還是應您的要求強制進行安裝。\n"

#: src/processarc.c:155
#, c-format
msgid "passed\n"
msgstr "通過\n"

#: src/processarc.c:168 dpkg-deb/info.c:81
#, fuzzy
msgid "unable to create temporary directory"
msgstr "無法為臨時目錄命名"

#: src/processarc.c:208
#, c-format
msgid "package %s has too many Conflicts/Replaces pairs"
msgstr "套件 %s 有太多的 衝突/替換 組合"

#: src/processarc.c:218 src/remove.c:207
#, c-format
msgid "unable to delete control info file `%.250s'"
msgstr "無法刪除 control 資訊檔 `%.250s'"

#: src/processarc.c:229
#, c-format
msgid "old version of package has overly-long info file name starting `%.250s'"
msgstr "原先版本的套件中包含了名稱過長的 info 檔，其開頭為 `%.250s'"

#: src/processarc.c:267
#, c-format
msgid "unable to remove obsolete info file `%.250s'"
msgstr "無法移除廢棄的 info 檔 `%.250s'"

#: src/processarc.c:272
#, c-format
msgid "unable to install (supposed) new info file `%.250s'"
msgstr "無法安裝（被認定為）新的 info 檔 `%.250s'"

#: src/processarc.c:282
msgid "unable to open temp control directory"
msgstr "無法開啟暫存的 control 目錄"

#: src/processarc.c:293
#, c-format
msgid "package contains overly-long control info file name (starting `%.50s')"
msgstr "套件的 control 資訊中包含了名稱過長的檔案（其開頭為 `%.250s'）"

#: src/processarc.c:300
#, c-format
msgid "package control info contained directory `%.250s'"
msgstr "套件的 control 資訊中包含了目錄 `%.250s'"

#: src/processarc.c:302
#, c-format
msgid "package control info rmdir of `%.250s' didn't say not a dir"
msgstr "套件 control 資訊 rmdir 了 `%.250s' 但沒有說這不是一個目錄"

#: src/processarc.c:312
#, fuzzy, c-format
msgid "package %s contained list as info file"
msgstr "dpkg：警告 - 套件 %s 裡的列表被當作 info 檔使用"

#: src/processarc.c:320
#, c-format
msgid "unable to install new info file `%.250s' as `%.250s'"
msgstr "無法把新的 info 檔 `%.250s' 安裝為 `%.250s'"

#: src/processarc.c:345
#, c-format
msgid "(Noting disappearance of %s, which has been completely replaced.)\n"
msgstr "（注意到 %s 已經不復存在，它已被完全取代了。）\n"

#: src/processarc.c:451
msgid "cannot access archive"
msgstr "無法存取套件檔"

#: src/processarc.c:473
#, fuzzy
#| msgid "control information length"
msgid "package control information extraction"
msgstr "control 資訊長度"

#: src/processarc.c:508
#, c-format
msgid "Recorded info about %s from %s.\n"
msgstr "從 %2$s 獲得關於 %1$s 的 info 記錄。\n"

#: src/processarc.c:518
#, c-format
msgid "package architecture (%s) does not match system (%s)"
msgstr "套件的系統平台 (%s) 與本機系統 (%s) 不符"

#: src/processarc.c:579
#, fuzzy, c-format
#| msgid ""
#| "dpkg: regarding %s containing %s, pre-dependency problem:\n"
#| "%s"
msgid ""
"regarding %s containing %s, pre-dependency problem:\n"
"%s"
msgstr ""
"dpkg：由於 %s 包含了 %s，預先相依問題：\n"
"%s"

#: src/processarc.c:583
#, c-format
msgid "pre-dependency problem - not installing %.250s"
msgstr "預先相依問題 - 將不安裝 %.250s"

#: src/processarc.c:585
#, fuzzy
msgid "ignoring pre-dependency problem!"
msgstr "dpkg：警告 - 忽視了預先相依問題！\n"

#: src/processarc.c:601
#, c-format
msgid "Preparing to replace %s %s (using %s) ...\n"
msgstr "正準備替換 %s %s（使用 %s）...\n"

#: src/processarc.c:607
#, c-format
msgid "Unpacking %s (from %s) ...\n"
msgstr "正在解開 %s （從 %s）...\n"

#: src/processarc.c:639
#, c-format
msgid "name of conffile (starting `%.250s') is too long (>%d characters)"
msgstr "conffile 的檔案名（開頭是 `%.250s'）過長（> %d 個字元）"

#: src/processarc.c:693 utils/update-alternatives.c:2104
#, c-format
msgid "read error in %.250s"
msgstr "在 %.250s 中發生讀取錯誤"

#: src/processarc.c:695
#, c-format
msgid "error closing %.250s"
msgstr "在關閉 %.250s 時發生錯誤"

#: src/processarc.c:739
#, c-format
msgid "De-configuring %s, to allow removal of %s ...\n"
msgstr "正在清除 %s 的設定，為了能移除 %s ...\n"

#: src/processarc.c:743
#, c-format
msgid "De-configuring %s ...\n"
msgstr "正在刪除 %s 的設定...\n"

#: src/processarc.c:824
#, c-format
msgid "Unpacking replacement %.250s ...\n"
msgstr "正在解開替換的套件檔 %.250s ...\n"

#: src/processarc.c:910
msgid "package filesystem archive extraction"
msgstr ""

#: src/processarc.c:925
msgid "error reading dpkg-deb tar output"
msgstr "在讀取 dpkg-deb 輸出的 tar 檔時發生錯誤"

#: src/processarc.c:927
msgid "corrupted filesystem tarfile - corrupted package archive"
msgstr "檔案系統上的 tar 檔已損壞 - 套件檔已毀損"

#: src/processarc.c:931
#, fuzzy, c-format
#| msgid "dpkg-deb: zap possible trailing zeros"
msgid "cannot zap possible trailing zeros from dpkg-deb: %s"
msgstr "dpkg-deb：截掉了可能會出現在結尾的字元 0"

#: src/processarc.c:991
#, fuzzy, c-format
msgid "could not stat old file '%.250s' so not deleting it: %s"
msgstr "dpkg：警告 - 無法取得原有的檔案 `%.250s' 的資訊，所以不會刪除：%s"

#: src/processarc.c:997
#, fuzzy, c-format
msgid "unable to delete old directory '%.250s': %s"
msgstr "dpkg：警告 - 無法刪除原有的目錄 `%.250s'：%s\n"

#: src/processarc.c:1000
#, fuzzy, c-format
msgid "old conffile '%.250s' was an empty directory (and has now been deleted)"
msgstr "dpkg：警告 - 原本的 conffile `%.250s' 是空目錄（現已刪除）\n"

#: src/processarc.c:1047
#, c-format
msgid "unable to stat other new file `%.250s'"
msgstr "無法取得其它新檔案 `%.250s' 的資訊"

#: src/processarc.c:1058
#, fuzzy, c-format
msgid ""
"old file '%.250s' is the same as several new files! (both '%.250s' and "
"'%.250s')"
msgstr ""
"dpkg：警告 - 舊檔案 `%.250s' 與數個新檔案相同！（`%.250s' 以及 `%.250s'）\n"

#: src/processarc.c:1097
#, fuzzy, c-format
msgid "unable to securely remove old file '%.250s': %s"
msgstr "dpkg：警告 - 無法 %s 原有的檔案 `%%.250s'：%%s\n"

#. TRANSLATORS: This is the header that appears on 'dpkg-query -l'. The
#. * string should remain under 80 characters. The uppercase letters in
#. * the state values denote the abbreviated letter that will appear on
#. * the first three columns, which should ideally match the English one
#. * (e.g. Remove → supRimeix), see dpkg-query(1) for further details. The
#. * translated message can use additional lines if needed.
#: src/querycmd.c:173
#, fuzzy
msgid ""
"Desired=Unknown/Install/Remove/Purge/Hold\n"
"| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-"
"pend\n"
"|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)\n"
msgstr ""
"要求=U:未知/I:安裝/R:刪除/P:清除/H:保留\n"
"| 狀態=N:尚未/I:已安裝/C:設定檔/U:已解開/F:設定失敗/H:半安裝/W:待處理/T:未處"
"理\n"
"|/ 錯誤?=(無)/H:保留/R:須重新安裝/X:兩者兼有（狀態，錯誤：大寫=有問題）\n"

#: src/querycmd.c:177
msgid "Name"
msgstr "名稱"

#: src/querycmd.c:177
msgid "Version"
msgstr "版本"

#: src/querycmd.c:178
msgid "Architecture"
msgstr ""

#: src/querycmd.c:178
msgid "Description"
msgstr "簡介"

#: src/querycmd.c:281 src/querycmd.c:568 src/select.c:93
#, fuzzy, c-format
#| msgid "No packages found matching %s.\n"
msgid "no packages found matching %s"
msgstr "沒有找到任何符合 %s 的套件。\n"

#: src/querycmd.c:312
#, c-format
msgid "diversion by %s from: %s\n"
msgstr "由 %s 所抽換，從：%s\n"

#: src/querycmd.c:314
#, c-format
msgid "diversion by %s to: %s\n"
msgstr "由 %s 所抽換，至：%s\n"

#: src/querycmd.c:317
#, c-format
msgid "local diversion from: %s\n"
msgstr "自行抽換，從：%s\n"

#: src/querycmd.c:318
#, c-format
msgid "local diversion to: %s\n"
msgstr "自行抽換，至：%s\n"

#: src/querycmd.c:348
msgid "--search needs at least one file name pattern argument"
msgstr "--search 需要至少一個檔案名稱表達式作為參數"

#: src/querycmd.c:389
#, fuzzy, c-format
#| msgid "No packages found matching %s.\n"
msgid "no path found matching pattern %s"
msgstr "沒有找到任何符合 %s 的套件。\n"

#: src/querycmd.c:436
#, fuzzy, c-format
#| msgid "Package `%s' is not installed and no info is available.\n"
msgid "package '%s' is not installed and no information is available"
msgstr "未曾安裝套件 `%s'，也無法取得其資訊。\n"

#: src/querycmd.c:445
#, fuzzy, c-format
#| msgid "Package `%s' is not available.\n"
msgid "package '%s' is not available"
msgstr "無法取得套件 `%s'。\n"

#: src/querycmd.c:455 src/querycmd.c:674 src/querycmd.c:706 src/querycmd.c:743
#, fuzzy, c-format
#| msgid "Package `%s' is not installed.\n"
msgid "package '%s' is not installed"
msgstr "套件 `%s' 未安裝。\n"

#: src/querycmd.c:464
#, c-format
msgid "Package `%s' does not contain any files (!)\n"
msgstr "套件 `%s' 未含有任何檔案 (!)\n"

#: src/querycmd.c:472
#, c-format
msgid "locally diverted to: %s\n"
msgstr "自行抽換至：%s\n"

#: src/querycmd.c:475
#, c-format
msgid "package diverts others to: %s\n"
msgstr "套件將其它的抽換至：%s\n"

#: src/querycmd.c:478
#, c-format
msgid "diverted by %s to: %s\n"
msgstr "被 %s 抽換到：%s\n"

#: src/querycmd.c:499
msgid ""
"Use dpkg --info (= dpkg-deb --info) to examine archive files,\n"
"and dpkg --contents (= dpkg-deb --contents) to list their contents.\n"
msgstr ""
"使用 dpkg --info (= dpkg-deb --info) 來檢測套件檔，\n"
"以及 dpkg --contents (= dpkg-deb --contents) 來列出它們的內容。\n"

#: src/querycmd.c:520 dpkg-deb/info.c:282
#, fuzzy, c-format
#| msgid "Error in format"
msgid "error in show format: %s"
msgstr "格式錯誤"

#: src/querycmd.c:610
#, c-format
msgid "control file contains %c"
msgstr ""

#: src/querycmd.c:661 dpkg-deb/build.c:411
#, fuzzy, c-format
msgid "--%s takes at most two arguments"
msgstr "--build 至多可有兩個參數"

#: src/querycmd.c:696
#, fuzzy, c-format
#| msgid "--%s needs at least one package name argument"
msgid "--%s takes one package name argument"
msgstr "--%s 需要至少一個套件名稱作為參數"

#: src/querycmd.c:726 src/querycmd.c:731
#, fuzzy, c-format
#| msgid "--contents takes exactly one argument"
msgid "--%s takes exactly two arguments"
msgstr "--contents 只需要一個參數"

#: src/querycmd.c:748
#, fuzzy, c-format
#| msgid "cannot stat old name `%s': %s"
msgid "control file '%s' does not exist"
msgstr "無法取得原本名稱 `%s' 的資訊：%s"

#: src/querycmd.c:760
#, fuzzy, c-format
msgid "Debian %s package management program query tool version %s.\n"
msgstr "Debian `%s' 套件管理程式版本%s。\n"

#: src/querycmd.c:779
#, fuzzy, c-format
msgid ""
"Commands:\n"
"  -s|--status <package> ...        Display package status details.\n"
"  -p|--print-avail <package> ...   Display available version details.\n"
"  -L|--listfiles <package> ...     List files `owned' by package(s).\n"
"  -l|--list [<pattern> ...]        List packages concisely.\n"
"  -W|--show [<pattern> ...]        Show information on package(s).\n"
"  -S|--search <pattern> ...        Find package(s) owning file(s).\n"
"     --control-list <package>      Print the package control file list.\n"
"     --control-show <package> <file>\n"
"                                   Show the package control file.\n"
"  -c|--control-path <package> [<file>]\n"
"                                   Print path for package control file.\n"
"\n"
msgstr ""
"指令：\n"
"  -s|--status <套件名> ...         顯示套件詳盡的狀態資訊。\n"
"  -p|--print-avail <套件名> ...    顯示套件目前可安裝版本的詳細資訊。\n"
"  -L|--listfiles <套件名> ...      列出所有 `屬於' 該套件的檔案。\n"
"  -I|--list [<表達式> ...]         簡要地列出套件。\n"
"  -W|--show <表達式> ...           顯示套件資訊。\n"
"  -S|--search <表達式> ...         搜尋擁有該檔案的套件。\n"
"\n"

#: src/querycmd.c:799
#, fuzzy, c-format
#| msgid ""
#| "Options:\n"
#| "  --admindir=<directory>           Use <directory> instead of %s.\n"
#| "  -f|--showformat=<format>         Use alternative format for --show.\n"
#| "\n"
msgid ""
"Options:\n"
"  --admindir=<directory>           Use <directory> instead of %s.\n"
"  --load-avail                     Use available file on --show and --list.\n"
"  -f|--showformat=<format>         Use alternative format for --show.\n"
"\n"
msgstr ""
"選項：\n"
"  --admindir=<目錄>                使用 <directory> 來替代 %s。\n"
"  -f|--showformat=<格式>           替 --show 指定其它的輸出格式。\n"
"\n"

#: src/querycmd.c:806 dpkg-deb/main.c:116
#, c-format
msgid ""
"Format syntax:\n"
"  A format is a string that will be output for each package. The format\n"
"  can include the standard escape sequences \\n (newline), \\r (carriage\n"
"  return) or \\\\ (plain backslash). Package information can be included\n"
"  by inserting variable references to package fields using the ${var[;"
"width]}\n"
"  syntax. Fields will be right-aligned unless the width is negative in "
"which\n"
"  case left alignment will be used.\n"
msgstr ""
"格式語法：\n"
"  『格式』是指在輸出套件資訊時所會採用的字串。可以在格式裡使用任何的跳脫字\n"
"  串，像是 \\n（開新行）、\\r（遊標返回）或 \\\\（反斜線）。套件的資訊可用\n"
"  插入某個變數的方式來引用，它是以 ${var[;width]} 之類的語法以參照至套件裡\n"
"  的各個欄位。各個欄位會是向右對齊，除非寬度是負的－那在此情況下會採用向左\n"
"  對齊。\n"

#: src/querycmd.c:820
msgid "Use --help for help about querying packages."
msgstr ""

#: src/remove.c:94
#, fuzzy, c-format
msgid "ignoring request to remove %.250s which isn't installed"
msgstr "dpkg - 警告：忽略了移除 %.250s 的要求，因為它並沒有被安裝。\n"

#: src/remove.c:101
#, fuzzy, c-format
msgid ""
"ignoring request to remove %.250s, only the config\n"
" files of which are on the system; use --purge to remove them too"
msgstr ""
"dpkg - 警告：忽略了移除 %.250s 的要求，它在系統中僅剩下設定檔。\n"
" 可使用 --purge 將這些設定檔一併刪除。\n"

#: src/remove.c:109
msgid "This is an essential package - it should not be removed."
msgstr "這是一個基本套件 - 不應當把它移除。"

#: src/remove.c:138
#, fuzzy, c-format
#| msgid ""
#| "dpkg: dependency problems prevent removal of %s:\n"
#| "%s"
msgid ""
"dependency problems prevent removal of %s:\n"
"%s"
msgstr ""
"dpkg：由於相依上的問題，不能移除 %s：\n"
"%s"

#: src/remove.c:140
msgid "dependency problems - not removing"
msgstr "相依問題 - 不進行移除"

#: src/remove.c:143
#, fuzzy, c-format
#| msgid ""
#| "dpkg: %s: dependency problems, but removing anyway as you requested:\n"
#| "%s"
msgid ""
"%s: dependency problems, but removing anyway as you requested:\n"
"%s"
msgstr ""
"dpkg：%s：發生相依上的問題，但還是應您要求強制將其移除：\n"
"%s"

#: src/remove.c:151
msgid ""
"Package is in a very bad inconsistent state - you should\n"
" reinstall it before attempting a removal."
msgstr "該套件正處於極度混亂的狀態 - 您最好能在移除它之前先重新安裝一次。"

#: src/remove.c:158
#, c-format
msgid "Would remove or purge %s ...\n"
msgstr "將要移除或清除 %s ...\n"

#: src/remove.c:166
#, c-format
msgid "Removing %s ...\n"
msgstr "正在移除 %s ...\n"

#: src/remove.c:326 src/remove.c:417
#, fuzzy, c-format
msgid ""
"while removing %.250s, unable to remove directory '%.250s': %s - directory "
"may be a mount point?"
msgstr ""
"dpkg - 警告：在移除 %.250s 時，無法刪除目錄 `%.250s'：%s - 該目錄會不會是一個"
"掛載點呢？\n"

#: src/remove.c:340
#, fuzzy, c-format
msgid "unable to securely remove '%.250s'"
msgstr "無法建立 `%.255s'"

#: src/remove.c:412
#, fuzzy, c-format
msgid "while removing %.250s, directory '%.250s' not empty so not removed"
msgstr ""
"dpkg - 警告：在移除 %.250s 時，目錄 `%.250s' 不是空的，所以不會將其刪除。\n"

#: src/remove.c:434
#, fuzzy, c-format
#| msgid "cannot remove `%.250s'"
msgid "cannot remove '%.250s'"
msgstr "無法移除 `%.250s'"

#: src/remove.c:460
#, c-format
msgid "Purging configuration files for %s ...\n"
msgstr "正在清除 %s 的設定檔 ...\n"

#: src/remove.c:513
#, c-format
msgid "cannot remove old config file `%.250s' (= `%.250s')"
msgstr "無法刪除原有的設定檔 `%.250s' (= `%.250s' )"

#: src/remove.c:528
#, c-format
msgid "cannot read config file dir `%.250s' (from `%.250s')"
msgstr "無法讀取設定檔目錄 `%.250s'（從 `%.250s'）"

#: src/remove.c:565
#, c-format
msgid "cannot remove old backup config file `%.250s' (of `%.250s')"
msgstr "無法刪除原有的設定檔備份 `%.250s'（`%.250s' 的）"

#: src/remove.c:624
msgid "cannot remove old files list"
msgstr "無法刪除原有的檔案列表"

#: src/remove.c:630
msgid "can't remove old postrm script"
msgstr "無法刪除原有的 postrm script"

#: src/script.c:96
#, c-format
msgid "unable to set execute permissions on `%.250s'"
msgstr "無法設定 `%.250s' 的執行權限"

#: src/script.c:110
msgid "admindir must be inside instdir for dpkg to work properly"
msgstr ""

#: src/script.c:115
#, c-format
msgid "failed to chroot to `%.250s'"
msgstr "無法 chroot 至 `%.250s'"

#: src/script.c:117 dpkg-deb/build.c:458 dpkg-deb/build.c:460
#: dpkg-deb/build.c:547 dpkg-deb/build.c:569
#, c-format
msgid "failed to chdir to `%.255s'"
msgstr "無法 chdir 到 `%.255s'"

#: src/script.c:156
#, fuzzy
msgid "unable to setenv for maintainer script"
msgstr "無法在 maint script 上進行 setenv"

#: src/script.c:180
#, fuzzy, c-format
msgid "installed %s script"
msgstr "原先的 %s script"

#: src/script.c:194 src/script.c:268 src/script.c:330
#, c-format
msgid "unable to stat %s `%.250s'"
msgstr "無法取得 %s `%.250s' 的狀態"

#: src/script.c:252 src/script.c:317
#, c-format
msgid "new %s script"
msgstr "新的 %s script"

#: src/script.c:290
#, c-format
msgid "old %s script"
msgstr "原先的 %s script"

#: src/script.c:305
#, fuzzy, c-format
msgid "unable to stat %s '%.250s': %s"
msgstr "無法取得 %s `%.250s' 的狀態"

#: src/script.c:314
#, fuzzy
#| msgid "dpkg - trying script from the new package instead ...\n"
msgid "trying script from the new package instead ..."
msgstr "dpkg - 試著替而使用新套件所附帶的 script ...\n"

#: src/script.c:328
msgid "there is no script in the new version of the package - giving up"
msgstr "新版本的套件裡並沒有 script - 取消操作"

#: src/script.c:334
#, fuzzy
#| msgid "dpkg: ... it looks like that went OK.\n"
msgid "... it looks like that went OK"
msgstr "dpkg：... 看起來它能正確執行。\n"

#: src/select.c:137
#, c-format
msgid "unexpected eof in package name at line %d"
msgstr "在第 %d 行的套件名稱中有預期之外的 eof"

#: src/select.c:138
#, c-format
msgid "unexpected end of line in package name at line %d"
msgstr "在第 %d 行的套件名稱中意外地發現此行結束"

#: src/select.c:144
#, c-format
msgid "unexpected eof after package name at line %d"
msgstr "在第 %d 行的套件名稱後有預期之外的 eof"

#: src/select.c:145
#, c-format
msgid "unexpected end of line after package name at line %d"
msgstr "在第 %d 行的套件名後意外地發現此行結束"

#: src/select.c:158
#, c-format
msgid "unexpected data after package and selection at line %d"
msgstr "在第 %d 行的套件及選擇項目之後有預期之外的資料"

#: src/select.c:162
#, c-format
msgid "illegal package name at line %d: %.250s"
msgstr "在第 %d 行有非法的套件名稱：%.250s"

#: src/select.c:166
#, fuzzy, c-format
#| msgid "illegal package name at line %d: %.250s"
msgid "package not in database at line %d: %.250s"
msgstr "在第 %d 行有非法的套件名稱：%.250s"

#: src/select.c:172
#, c-format
msgid "unknown wanted status at line %d: %.250s"
msgstr "在第 %d 行所得到的狀態不明：%.250s"

#: src/select.c:178
msgid "read error on standard input"
msgstr "從標準輸入讀取資料時發生錯誤"

#: src/statcmd.c:52
msgid "Use --help for help about overriding file stat information."
msgstr ""

#: src/statcmd.c:77
#, c-format
msgid ""
"Commands:\n"
"  --add <owner> <group> <mode> <file>\n"
"                           add a new entry into the database.\n"
"  --remove <file>          remove file from the database.\n"
"  --list [<glob-pattern>]  list current overrides in the database.\n"
"\n"
msgstr ""

#: src/statcmd.c:85
#, fuzzy, c-format
msgid ""
"Options:\n"
"  --admindir <directory>   set the directory with the statoverride file.\n"
"  --update                 immediately update file permissions.\n"
"  --force                  force an action even if a sanity check fails.\n"
"  --quiet                  quiet operation, minimal output.\n"
"  --help                   show this help message.\n"
"  --version                show the version.\n"
"\n"
msgstr ""
"用法：%s [<選項> ...] <命令>\n"
"\n"
"命令：\n"
"  --add <擁有者> <群組> <模式> <檔案>\n"
"                           新增一個新項目至資料庫。\n"
"  --remove <檔案>          由資料庫中移除檔案。\n"
"  --list [<比對表達式>]    列出目前資料庫中的強制選項。\n"
"\n"
"選項：\n"
"  --admindir <目錄>        設定 statoverride 檔所使用的目錄。\n"
"  --update                 立即更新檔案權限。\n"
"  --force                  即使未能通過完整檢驗，也強制進行某個動作。\n"
"  --quiet                  安靜模式，儘量不顯示訊息。\n"
"  --help                   顯示這個說明訊息。\n"
"  --version                顯示版本資訊。\n"

#: src/statcmd.c:112
msgid "stripping trailing /"
msgstr "除去結尾的 /"

#: src/statcmd.c:227
#, fuzzy, c-format
#| msgid "--add needs four arguments"
msgid "--%s needs four arguments"
msgstr "--add 需要四個參數"

#: src/statcmd.c:237
#, fuzzy, c-format
msgid ""
"an override for '%s' already exists, but --force specified so will be ignored"
msgstr "但又設定了 --force，所以該選項會被忽略。"

#: src/statcmd.c:241
#, fuzzy, c-format
msgid "an override for '%s' already exists; aborting"
msgstr "已設定了 \"%s\" 的強制選項，"

#: src/statcmd.c:253
#, fuzzy, c-format
msgid "--update given but %s does not exist"
msgstr "警告：己設定為 --update 但 %s 不存在"

#: src/statcmd.c:277
#, fuzzy
#| msgid "No override present."
msgid "no override present"
msgstr "沒有設定強制選項。"

#: src/statcmd.c:285
#, fuzzy
msgid "--update is useless for --remove"
msgstr "警告：在 --remove 時，--update 是無效的"

#: src/statdb.c:60
#, fuzzy
msgid "syntax error: invalid uid in statoverride file"
msgstr "在安裝新的 statoverride 時發生錯誤：%s"

#: src/statdb.c:65
#, c-format
msgid "syntax error: unknown user '%s' in statoverride file"
msgstr ""

#: src/statdb.c:85
#, fuzzy
msgid "syntax error: invalid gid in statoverride file"
msgstr "在安裝新的 statoverride 時發生錯誤：%s"

#: src/statdb.c:90
#, fuzzy, c-format
msgid "syntax error: unknown group '%s' in statoverride file"
msgstr "無法開啟 statoverride 檔"

#: src/statdb.c:106
#, fuzzy
msgid "syntax error: invalid mode in statoverride file"
msgstr "無法開啟 statoverride 檔"

#: src/statdb.c:129
msgid "failed to open statoverride file"
msgstr "無法開啟 statoverride 檔"

#: src/statdb.c:136
msgid "failed to fstat statoverride file"
msgstr "無法 fstat statoverride 檔"

#: src/statdb.c:139
msgid "failed to fstat previous statoverride file"
msgstr "無法 fstat 原有的 statoverride 檔"

#: src/statdb.c:164
#, fuzzy, c-format
#| msgid "statoverride file `%.250s'"
msgid "reading statoverride file '%.250s'"
msgstr "statoverride 檔 `%.250s'"

#: src/statdb.c:171
#, fuzzy
msgid "statoverride file is missing final newline"
msgstr "statoverride 檔裡有空行"

#: src/statdb.c:175
msgid "statoverride file contains empty line"
msgstr "statoverride 檔裡有空行"

#: src/statdb.c:180 src/statdb.c:192 src/statdb.c:204
#, fuzzy
msgid "syntax error in statoverride file"
msgstr "無法開啟 statoverride 檔"

#: src/statdb.c:188 src/statdb.c:200 src/statdb.c:212
#, fuzzy
msgid "unexpected end of line in statoverride file"
msgstr "在第 %d 行的套件名稱中意外地發現此行結束"

#: src/statdb.c:216
#, fuzzy, c-format
msgid "multiple statusoverrides present for file '%.250s'"
msgstr "statoverride 檔 `%.250s'"

#: src/trigcmd.c:48
msgid "Type dpkg-trigger --help for help about this utility."
msgstr "輸入 dpkg-trigger --help 以取得這個工具的說明。"

#: src/trigcmd.c:53
#, fuzzy, c-format
msgid "Debian %s package trigger utility version %s.\n"
msgstr "Debian %s 套件觸發程式工具。\n"

#: src/trigcmd.c:69
#, c-format
msgid ""
"Usage: %s [<options> ...] <trigger-name>\n"
"       %s [<options> ...] <command>\n"
"\n"
msgstr ""
"用法：%s [<選項> ...] <觸發程式>\n"
"      %s [<選項> ...] <命令>\n"
"\n"

#: src/trigcmd.c:74
#, c-format
msgid ""
"Commands:\n"
"  --check-supported                Check if the running dpkg supports "
"triggers.\n"
"\n"
msgstr ""
"指令：\n"
"  --check-supported                檢查正在運作中的 dpkg 是否支援觸發程式。\n"
"\n"

#: src/trigcmd.c:84
#, c-format
msgid ""
"Options:\n"
"  --admindir=<directory>           Use <directory> instead of %s.\n"
"  --by-package=<package>           Override trigger awaiter (normally set\n"
"                                     by dpkg).\n"
"  --no-await                       No package needs to await the "
"processing.\n"
"  --no-act                         Just test - don't actually change "
"anything.\n"
"\n"
msgstr ""
"選項：\n"
"  --admindir=<目錄>                使用 <目錄> 以取代 %s。\n"
"  --by-package=<套件>              強制使用其它的程式以等待觸發程式完成\n"
"                                   （通常是由 dpkg 指定）。\n"
"  --no-await                       沒有套件需等待這個處理過程。\n"
"  --no-act                         僅測試 - 不要真的修改任何東西。\n"
"\n"

#: src/trigcmd.c:127
#, fuzzy
#| msgid ""
#| "dpkg-trigger must be called from a maintainer script (or with a --by-"
#| "package option)"
msgid "must be called from a maintainer script (or with a --by-package option)"
msgstr ""
"dpkg-trigger 必須由某個維護者的 Script（或搭配 --by-package 選項）所呼叫"

#: src/trigcmd.c:183
#, fuzzy
#| msgid "%s: triggers data directory not yet created\n"
msgid "triggers data directory not yet created"
msgstr "%s：觸發程式的資料目錄尚未建立\n"

#: src/trigcmd.c:186
#, fuzzy
#| msgid "%s: trigger records not yet in existence\n"
msgid "trigger records not yet in existence"
msgstr "%s：觸發程式的記錄並未存在\n"

#: src/trigcmd.c:234
#, fuzzy
msgid "takes one argument, the trigger name"
msgstr "dpkg-trigger 只需一個參數，觸發程式的名稱"

#: src/trigcmd.c:238
#, fuzzy, c-format
#| msgid "dpkg-trigger: illegal awaited package name `%.250s': %.250s"
msgid "illegal awaited package name '%.250s': %.250s"
msgstr "dpkg-trigger：不合法的等待套件名稱 `%.250s'：%.250s"

#: src/trigcmd.c:244
#, fuzzy, c-format
msgid "invalid trigger name `%.250s': %.250s"
msgstr "dpkg-trigger：不正確的觸發程式名稱 `%.250s'：%.250s"

#: src/trigproc.c:262
#, fuzzy
#| msgid ""
#| "%s: cycle found while processing triggers:\n"
#| " chain of packages whose triggers are or may be responsible:\n"
msgid ""
"cycle found while processing triggers:\n"
" chain of packages whose triggers are or may be responsible:"
msgstr ""
"%s: 在處理觸發程式時發生循環：\n"
" 可能是因為這些連鎖套件所附帶的觸發程式所引起的：\n"

#: src/trigproc.c:270
#, c-format
msgid ""
"\n"
" packages' pending triggers which are or may be unresolvable:\n"
msgstr ""
"\n"
" 套件尚待進行的觸發程式（有可能）無法解決：\n"

#: src/trigproc.c:295
msgid "triggers looping, abandoned"
msgstr "觸發程式陷入迴圈，已放棄執行"

#: src/trigproc.c:327
#, c-format
msgid "Processing triggers for %s ...\n"
msgstr "正在進行 %s 的觸發程式 ...\n"

#: src/update.c:52
#, fuzzy, c-format
#| msgid "--%s needs exactly one Packages file argument"
msgid "--%s needs exactly one Packages-file argument"
msgstr "--%s 需要一個套件名稱作為參數"

#: src/update.c:62
msgid "unable to access dpkg status area for bulk available update"
msgstr "無法存取 dpkg 的狀態庫，以進行大量可用套件的更新"

#: src/update.c:64
msgid "bulk available update requires write access to dpkg status area"
msgstr "要進行大量可用套件的更新，需有在 dpkg 狀態庫上的寫入權限"

#: src/update.c:71
#, c-format
msgid "Replacing available packages info, using %s.\n"
msgstr "正在取代可用套件資訊，使用 %s。\n"

#: src/update.c:74
#, c-format
msgid "Updating available packages info, using %s.\n"
msgstr "正在更新可用套件的資訊，使用 %s。\n"

#: src/update.c:98
#, fuzzy, c-format
#| msgid "Information about %d package(s) was updated.\n"
msgid "Information about %d package was updated.\n"
msgid_plural "Information about %d packages was updated.\n"
msgstr[0] "共更新了 %d 個套件的相關資訊。\n"
msgstr[1] "共更新了 %d 個套件的相關資訊。\n"

#: src/update.c:112
#, c-format
msgid ""
"obsolete '--%s' option; unavailable packages are automatically cleaned up"
msgstr ""

#: dpkg-deb/build.c:124
#, c-format
msgid "file name '%.50s...' is too long"
msgstr "檔案名稱 '%.50s...' 太長了"

#: dpkg-deb/build.c:129
#, fuzzy, c-format
msgid "unable to stat file name '%.250s'"
msgstr "無法開啟來源檔 `%.250s'"

#: dpkg-deb/build.c:189
#, fuzzy
msgid "unable to stat control directory"
msgstr "無法開啟暫存的 control 目錄"

#: dpkg-deb/build.c:191
#, fuzzy
msgid "control directory is not a directory"
msgstr "無法讀取 info 目錄"

#: dpkg-deb/build.c:193
#, c-format
msgid "control directory has bad permissions %03lo (must be >=0755 and <=0775)"
msgstr "control 目錄的權限為 %03lo 並不正確（必須 >=0755 且 <=0755）"

#: dpkg-deb/build.c:204
#, c-format
msgid "maintainer script `%.50s' is not a plain file or symlink"
msgstr "維護者的 script `%.50s' 並非一般檔案或符號連結"

#: dpkg-deb/build.c:207
#, c-format
msgid ""
"maintainer script `%.50s' has bad permissions %03lo (must be >=0555 and "
"<=0775)"
msgstr ""
"維護者的 script `%.50s' 的權限為 %03lo 並不恰當（必須 >=0555 且 <=0775）"

#: dpkg-deb/build.c:211
#, c-format
msgid "maintainer script `%.50s' is not stattable"
msgstr "無法取得維護者的 script `%.50s' 的狀態"

#: dpkg-deb/build.c:237
msgid "error opening conffiles file"
msgstr "在開啟 conffile 檔時發生錯誤"

#: dpkg-deb/build.c:246
msgid "empty string from fgets reading conffiles"
msgstr "在以 fgets 讀取 conffile 時，傳回了空字串"

#: dpkg-deb/build.c:251
#, fuzzy, c-format
msgid "conffile name '%.50s...' is too long, or missing final newline"
msgstr "警告，conffile 的名稱 `%.50s' 過長，或是少了結尾的換行符號\n"

#: dpkg-deb/build.c:264
#, fuzzy, c-format
msgid "conffile filename '%s' contains trailing white spaces"
msgstr "警告，conffile 的檔案名稱 `%s' 的結尾有空白字元\n"

#: dpkg-deb/build.c:266
#, c-format
msgid "conffile `%.250s' does not appear in package"
msgstr "在套件裡沒有找到 conffile `%.250s'"

#: dpkg-deb/build.c:268
#, c-format
msgid "conffile `%.250s' is not stattable"
msgstr "無法取得 conffile `%.50s' 的狀態"

#: dpkg-deb/build.c:270
#, fuzzy, c-format
msgid "conffile '%s' is not a plain file"
msgstr "警告，conffile `%s' 並非一般檔案\n"

#: dpkg-deb/build.c:274
#, fuzzy, c-format
msgid "conffile name '%s' is duplicated"
msgstr "次要名稱 %s 已重複"

#: dpkg-deb/build.c:287
msgid "error reading conffiles file"
msgstr "在讀取 conffile 檔時發生錯誤"

#: dpkg-deb/build.c:339
msgid "package name has characters that aren't lowercase alphanums or `-+.'"
msgstr "套件的名字含有不是英數字或 `-+.' 的字元"

#: dpkg-deb/build.c:341
#, fuzzy, c-format
msgid "'%s' contains user-defined Priority value '%s'"
msgstr "警告， `%s' 包含了使用者自訂的優先等級 `%s'\n"

#: dpkg-deb/build.c:347
#, fuzzy, c-format
msgid "'%s' contains user-defined field '%s'"
msgstr "警告， `%s' 包含了使用者自訂的欄位 `%s'\n"

#: dpkg-deb/build.c:358
#, fuzzy, c-format
msgid "ignoring %d warning about the control file(s)\n"
msgid_plural "ignoring %d warnings about the control file(s)\n"
msgstr[0] "dpkg-deb：忽略了 %d 個有關 control 資訊檔的警告\n"
msgstr[1] "dpkg-deb：忽略了 %d 個有關 control 資訊檔的警告\n"

#: dpkg-deb/build.c:404 utils/update-alternatives.c:2577
#: utils/update-alternatives.c:2584
#, c-format
msgid "--%s needs a <directory> argument"
msgstr "--%s 需有 <目錄名> 參數"

#: dpkg-deb/build.c:415
#, c-format
msgid "unable to check for existence of archive `%.250s'"
msgstr "無法判斷套件檔 `%.250s' 是否存在"

#: dpkg-deb/build.c:432
msgid "target is directory - cannot skip control file check"
msgstr "目的地是目錄 - 無法略過 control 檔的檢查"

#: dpkg-deb/build.c:433
msgid "not checking contents of control area"
msgstr ""

#: dpkg-deb/build.c:434
#, fuzzy, c-format
msgid "dpkg-deb: building an unknown package in '%s'.\n"
msgstr "dpkg-deb：正把套件 `%s' 編譯為 `%s'。\n"

#: dpkg-deb/build.c:441
#, c-format
msgid "dpkg-deb: building package `%s' in `%s'.\n"
msgstr "dpkg-deb：正把套件 `%s' 編譯為 `%s'。\n"

#: dpkg-deb/build.c:470 dpkg-deb/build.c:532
#, fuzzy, c-format
#| msgid "failed to make tmpfile (data)"
msgid "failed to make temporary file (%s)"
msgstr "無法建立臨時檔 (data)"

#: dpkg-deb/build.c:470 dpkg-deb/build.c:473 dpkg-deb/build.c:494
#: dpkg-deb/build.c:503 dpkg-deb/build.c:509
#, fuzzy
#| msgid "control area"
msgid "control member"
msgstr "control 區域"

#: dpkg-deb/build.c:473 dpkg-deb/build.c:535
#, fuzzy, c-format
#| msgid "failed to unlink tmpfile (data), %s"
msgid "failed to unlink temporary file (%s), %s"
msgstr "無法刪除臨時檔 (data)，%s"

#: dpkg-deb/build.c:486
#, fuzzy
#| msgid "control area"
msgid "compressing control member"
msgstr "control 區域"

#: dpkg-deb/build.c:494 dpkg-deb/build.c:605
#, fuzzy, c-format
#| msgid "failed to rewind tmpfile (data)"
msgid "failed to rewind temporary file (%s)"
msgstr "無法跳到臨時檔的起始位置 (data)"

#: dpkg-deb/build.c:503
#, fuzzy, c-format
msgid "failed to stat temporary file (%s)"
msgstr "無法建立臨時檔 (data)"

#: dpkg-deb/build.c:507
#, c-format
msgid "error writing `%s'"
msgstr "`%s' 寫入錯誤"

#: dpkg-deb/build.c:509
#, fuzzy, c-format
#| msgid "cannot stat old name `%s': %s"
msgid "cannot copy '%s' into archive '%s': %s"
msgstr "無法取得原本名稱 `%s' 的資訊：%s"

#: dpkg-deb/build.c:532 dpkg-deb/build.c:535 dpkg-deb/build.c:583
#: dpkg-deb/build.c:591 dpkg-deb/build.c:605
#, fuzzy
#| msgid "between members"
msgid "data member"
msgstr "成員之間"

#: dpkg-deb/build.c:557
#, fuzzy
#| msgid "between members"
msgid "compressing data member"
msgstr "成員之間"

#: dpkg-deb/build.c:582 dpkg-deb/build.c:591
#, fuzzy, c-format
#| msgid "failed to write filename to tar pipe (data)"
msgid "failed to write filename to tar pipe (%s)"
msgstr "無法寫入檔案名稱到 tar 的管線 (data)"

#: dpkg-deb/build.c:595
msgid "<compress> from tar -cf"
msgstr ""

#: dpkg-deb/extract.c:63 dpkg-deb/extract.c:65
msgid "shell command to move files"
msgstr ""

#: dpkg-deb/extract.c:72
#, c-format
msgid "unexpected end of file in %s in %.255s"
msgstr "在 %2$.255s 中的 %1$s 有預期之外的檔案結束符號"

#: dpkg-deb/extract.c:74
#, c-format
msgid "error reading %s from file %.255s"
msgstr "無法從檔案 %2$.255s 讀取 %1$s"

#: dpkg-deb/extract.c:129
#, c-format
msgid "failed to read archive `%.255s'"
msgstr "無法讀取套件檔 `%.255s'"

#: dpkg-deb/extract.c:131
msgid "failed to fstat archive"
msgstr "無法 fstat 套件檔"

#: dpkg-deb/extract.c:135
#, fuzzy
#| msgid "archive has no dot in version number"
msgid "archive magic version number"
msgstr "套件檔的版本編號中沒有點號"

#: dpkg-deb/extract.c:145
#, fuzzy
#| msgid "archive has no newlines in header"
msgid "archive member header"
msgstr "套件檔的檔案標頭中沒有換行符號"

#: dpkg-deb/extract.c:150
#, fuzzy, c-format
#| msgid "file `%.250s' is corrupt - bad part number"
msgid "file '%.250s' is corrupt - bad archive header magic"
msgstr "檔案 `%.250s' 已經損毀 - 分割號碼不符"

#: dpkg-deb/extract.c:156
#, c-format
msgid "file `%.250s' is not a debian binary archive (try dpkg-split?)"
msgstr "檔案 `%.250s' 不是 debian 的二進制套件檔（試試 dpkg-split？）"

#: dpkg-deb/extract.c:160
#, fuzzy
#| msgid "archive has no dot in version number"
msgid "archive information header member"
msgstr "套件檔的版本編號中沒有點號"

#: dpkg-deb/extract.c:164 dpkg-deb/extract.c:227
msgid "archive has no newlines in header"
msgstr "套件檔的檔案標頭中沒有換行符號"

#: dpkg-deb/extract.c:167 dpkg-deb/extract.c:230
#, fuzzy, c-format
#| msgid "archive has no dot in version number"
msgid "archive has invalid format version: %s"
msgstr "套件檔的版本編號中沒有點號"

#: dpkg-deb/extract.c:169
#, fuzzy, c-format
#| msgid "archive version %.250s not understood, get newer dpkg-deb"
msgid "archive is format version %d.%d; get a newer dpkg-deb"
msgstr "無法識別套件檔的版本 %.250s，請升級 dpkg-deb"

#: dpkg-deb/extract.c:179 dpkg-deb/extract.c:205
#, fuzzy, c-format
#| msgid "skipped member data from %s"
msgid "cannot skip archive member from '%s': %s"
msgstr "忽略了 %s 中的成員資料"

#: dpkg-deb/extract.c:194
#, fuzzy, c-format
#| msgid "file `%.250s' contains ununderstood data member %.*s, giving up"
msgid "archive '%.250s' contains not understood data member %.*s, giving up"
msgstr "檔案 `%.250s' 含有未知的成員資料 %.*s，取消操作"

#: dpkg-deb/extract.c:199
#, fuzzy, c-format
#| msgid "file `%.250s' contains two control members, giving up"
msgid "archive '%.250s' contains two control members, giving up"
msgstr "檔案 `%.250s' 含有兩個 control 成員，取消操作"

#: dpkg-deb/extract.c:214
#, fuzzy, c-format
#| msgid ""
#| " new debian package, version %s.\n"
#| " size %ld bytes: control archive= %zi bytes.\n"
msgid ""
" new debian package, version %d.%d.\n"
" size %jd bytes: control archive=%jd bytes.\n"
msgstr ""
" 新式 debian 套件，版本 %s。\n"
" 大小為 %ld bytes：control 套件檔=%zi bytes。\n"

#: dpkg-deb/extract.c:234
msgid "archive control member size"
msgstr ""

#: dpkg-deb/extract.c:237
#, fuzzy, c-format
#| msgid "archive has malformatted control length `%s'"
msgid "archive has malformatted control member size '%s'"
msgstr "套件檔中的 control 資訊長度 `%s' 不合規格"

#: dpkg-deb/extract.c:244
#, fuzzy, c-format
#| msgid "skipped member data from %s"
msgid "cannot skip archive control member from '%s': %s"
msgstr "忽略了 %s 中的成員資料"

#: dpkg-deb/extract.c:249
#, fuzzy, c-format
#| msgid ""
#| " old debian package, version %s.\n"
#| " size %ld bytes: control archive= %zi, main archive= %ld.\n"
msgid ""
" old debian package, version %d.%d.\n"
" size %jd bytes: control archive=%jd, main archive=%jd.\n"
msgstr ""
" 舊式 debian 套件，版本 %s。\n"
" 大小為 %ld bytes：control 套件檔= %zi bytes，主要套件檔= %ld。\n"

#: dpkg-deb/extract.c:258
#, fuzzy
#| msgid ""
#| "dpkg-deb: file looks like it might be an archive which has been\n"
#| "dpkg-deb:    corrupted by being downloaded in ASCII mode\n"
msgid ""
"file looks like it might be an archive which has been\n"
" corrupted by being downloaded in ASCII mode"
msgstr ""
"dpkg-deb：這個檔案看起來應該是個套件檔，但可能因為在下載時使用了\n"
"dpkg-deb：   ASCII 模式而損壞了\n"

#: dpkg-deb/extract.c:262
#, c-format
msgid "`%.255s' is not a debian format archive"
msgstr "`%.255s' 並非 debian 格式的套件檔"

#: dpkg-deb/extract.c:270
#, c-format
msgid "cannot copy archive member from '%s' to decompressor pipe: %s"
msgstr ""

#: dpkg-deb/extract.c:273
msgid "cannot close decompressor pipe"
msgstr ""

#: dpkg-deb/extract.c:290
msgid "decompressing archive member"
msgstr ""

#: dpkg-deb/extract.c:313
msgid "failed to chdir to directory"
msgstr "無法 chdir 到目錄"

#: dpkg-deb/extract.c:316
msgid "failed to create directory"
msgstr "無法建立目錄"

#: dpkg-deb/extract.c:318
msgid "failed to chdir to directory after creating it"
msgstr "在建立目錄後，無法 chdir 到該目錄"

#: dpkg-deb/extract.c:329
#, fuzzy
msgid "<decompress>"
msgstr "%s：解壓縮"

#: dpkg-deb/extract.c:331
#, fuzzy
msgid "paste"
msgstr "通過\n"

#: dpkg-deb/extract.c:353 dpkg-deb/extract.c:374 dpkg-deb/extract.c:413
#: dpkg-deb/info.c:77
#, c-format
msgid "--%s needs a .deb filename argument"
msgstr "--%s 需要一個 .deb 檔案名稱作為參數"

#: dpkg-deb/extract.c:358 dpkg-deb/extract.c:417
#, c-format
msgid ""
"--%s needs a target directory.\n"
"Perhaps you should be using dpkg --install ?"
msgstr ""
"--%s 需要一個目的地目錄。\n"
"或許您應該使用 dpkg --install？"

#: dpkg-deb/extract.c:361 dpkg-deb/extract.c:421
#, c-format
msgid "--%s takes at most two arguments (.deb and directory)"
msgstr "--%s 至多可有兩個參數（.deb 和目錄）"

#: dpkg-deb/extract.c:376
#, c-format
msgid "--%s takes only one argument (.deb filename)"
msgstr "--%s 只需一個參數（.deb 檔案名稱）"

#: dpkg-deb/info.c:63
msgid "failed to chdir to `/' for cleanup"
msgstr "無法 chdir 到 `/' 以進行清理"

#: dpkg-deb/info.c:108
#, fuzzy, c-format
#| msgid "cannot read config file dir `%.250s' (from `%.250s')"
msgid "cannot extract control file '%s' from '%s': %s"
msgstr "無法讀取設定檔目錄 `%.250s'（從 `%.250s'）"

#: dpkg-deb/info.c:112
#, fuzzy, c-format
#| msgid "dpkg-deb: `%.255s' contains no control component `%.255s'\n"
msgid "'%.255s' contains no control component '%.255s'"
msgstr "dpkg-deb：`%.255s' 中沒有控制元件 `%.255s'\n"

#: dpkg-deb/info.c:116
#, c-format
msgid "open component `%.255s' (in %.255s) failed in an unexpected way"
msgstr "在開啟元件 `%.255s'（位於 %.255s）時以意想不到的方式失敗了"

#: dpkg-deb/info.c:123
#, fuzzy, c-format
#| msgid "One requested control component is missing"
msgid "%d requested control component is missing"
msgid_plural "%d requested control components are missing"
msgstr[0] "找不到某個必要的控制元件"
msgstr[1] "找不到某個必要的控制元件"

#: dpkg-deb/info.c:141 utils/update-alternatives.c:1065
#, c-format
msgid "cannot scan directory `%.255s'"
msgstr "無法掃瞄目錄 `%.255s'"

#: dpkg-deb/info.c:150
#, c-format
msgid "cannot stat `%.255s' (in `%.255s')"
msgstr "無法取得 `%.255s' 的狀態（位於 `%.255s'）"

#: dpkg-deb/info.c:154
#, c-format
msgid "cannot open `%.255s' (in `%.255s')"
msgstr "無法開啟 `%.255s'（位於 `%.255s'）"

#: dpkg-deb/info.c:169 dpkg-deb/info.c:187 dpkg-deb/info.c:201
#, c-format
msgid "failed to read `%.255s' (in `%.255s')"
msgstr "無法讀取 `%.255s'（位於 `%.255s'）"

#: dpkg-deb/info.c:172
#, fuzzy, c-format
#| msgid " %7ld bytes, %5d lines   %c  %-20.127s %.127s\n"
msgid " %7jd bytes, %5d lines   %c  %-20.127s %.127s\n"
msgstr " %7ld bytes，%5d 行      %c  %-20.127s %.127s\n"

#: dpkg-deb/info.c:176
#, c-format
msgid "     not a plain file          %.255s\n"
msgstr "     並非一般檔案              %.255s\n"

#: dpkg-deb/info.c:188
msgid "(no `control' file in control archive!)\n"
msgstr "（在 control 套件檔中沒有 `control' 檔！)\n"

#: dpkg-deb/info.c:224
msgid "could not open the `control' component"
msgstr "無法開啟 `control' 元件"

#: dpkg-deb/info.c:263
msgid "failed during read of `control' component"
msgstr "在讀取 `control' 元件時失敗"

#: dpkg-deb/info.c:265
#, fuzzy, c-format
msgid "error closing the '%s' component"
msgstr "在關閉 find 的管線時發生錯誤"

#: dpkg-deb/main.c:56
#, c-format
msgid "Debian `%s' package archive backend version %s.\n"
msgstr "Debian `%s' 套件檔的後端，版本 %s。\n"

#: dpkg-deb/main.c:75
#, fuzzy, c-format
#| msgid ""
#| "Commands:\n"
#| "  -b|--build <directory> [<deb>]   Build an archive.\n"
#| "  -c|--contents <deb>              List contents.\n"
#| "  -I|--info <deb> [<cfile> ...]    Show info to stdout.\n"
#| "  -W|--show <deb>                  Show information on package(s)\n"
#| "  -f|--field <deb> [<cfield> ...]  Show field(s) to stdout.\n"
#| "  -e|--control <deb> [<directory>] Extract control info.\n"
#| "  -x|--extract <deb> <directory>   Extract files.\n"
#| "  -X|--vextract <deb> <directory>  Extract & list files.\n"
#| "  --fsys-tarfile <deb>             Output filesystem tarfile.\n"
#| "\n"
msgid ""
"Commands:\n"
"  -b|--build <directory> [<deb>]   Build an archive.\n"
"  -c|--contents <deb>              List contents.\n"
"  -I|--info <deb> [<cfile> ...]    Show info to stdout.\n"
"  -W|--show <deb>                  Show information on package(s)\n"
"  -f|--field <deb> [<cfield> ...]  Show field(s) to stdout.\n"
"  -e|--control <deb> [<directory>] Extract control info.\n"
"  -x|--extract <deb> <directory>   Extract files.\n"
"  -X|--vextract <deb> <directory>  Extract & list files.\n"
"  -R|--raw-extract <deb> <directory>\n"
"                                   Extract control info and files.\n"
"  --fsys-tarfile <deb>             Output filesystem tarfile.\n"
"\n"
msgstr ""
"指令：\n"
"  -b|--build <目錄> [<deb>]        編譯套件檔。\n"
"  -c|--contents <deb>              列出檔案內容。\n"
"  -I|--info <deb> [<cfile> ...]    顯示 info 至 stdout。\n"
"  -W|--show <deb>                  顯示套件資訊\n"
"  -f|--field <deb> [<cfield> ...]  顯示欄位至 stdout。\n"
"  -e|--control <deb> [<目錄>]      解開 control 資訊。\n"
"  -x|--extract <deb> <目錄>        解開檔案。\n"
"  -X|--vextract <deb> <目錄>       解開並列出檔案。\n"
"  --fsys-tarfile <deb>             輸出檔案系統的 tar 檔。\n"
"\n"

#: dpkg-deb/main.c:95
#, c-format
msgid ""
"<deb> is the filename of a Debian format archive.\n"
"<cfile> is the name of an administrative file component.\n"
"<cfield> is the name of a field in the main `control' file.\n"
"\n"
msgstr ""
"<deb> 是某個 Debian 套件檔的檔案名稱。\n"
"<cfile> 是某個管理用的檔案元件的名稱。\n"
"<cfield> 是主要 `control' 檔中的一個欄位的名稱。\n"
"\n"

#: dpkg-deb/main.c:101
#, fuzzy, c-format
msgid ""
"Options:\n"
"  --showformat=<format>            Use alternative format for --show.\n"
"  -v, --verbose                    Enable verbose output.\n"
"  -D                               Enable debugging output.\n"
"  --old, --new                     Select archive format.\n"
"  --nocheck                        Suppress control file check (build bad\n"
"                                     packages).\n"
"  -z#                              Set the compression level when building.\n"
"  -Z<type>                         Set the compression type used when "
"building.\n"
"                                     Allowed types: gzip, xz, bzip2, none.\n"
"  -S<strategy>                     Set the compression strategy when "
"building.\n"
"                                     Allowed values: none, extreme (xz).\n"
"\n"
msgstr ""
"選項：\n"
"  --showformat=<格式>            替 --show 指定其它的輸出格式。\n"
"  -D                             啟用除錯資訊。\n"
"  --old, --new                   指定套件檔格式。\n"
"  --nocheck                      不檢查 control 檔（可能會生成有問題的套"
"件）。\n"
"  -z#                            在編譯時指定其壓縮比率。\n"
"  -Z<type>                       在編譯時指定其壓縮類型。\n"
"                                   可使用的選項：gzip、bzip2、lzma、none。\n"
"\n"

#: dpkg-deb/main.c:125
#, c-format
msgid ""
"\n"
"Use `dpkg' to install and remove packages from your system, or\n"
"`dselect' or `aptitude' for user-friendly package management.  Packages\n"
"unpacked using `dpkg-deb --extract' will be incorrectly installed !\n"
msgstr ""
"\n"
"使用 `dpkg' 來安裝和移除您系統上的套件，或是用 `dselect' 或 `aptitude'\n"
"等較人性化的套件管理程式。用 `dpkg-deb --extract' 來解開套件並不是正確\n"
"的安裝方式！\n"

#: dpkg-deb/main.c:136
msgid ""
"Type dpkg-deb --help for help about manipulating *.deb files;\n"
"Type dpkg --help for help about installing and deinstalling packages."
msgstr ""
"輸入 dpkg-deb --help 以取得如何操作 *.deb 檔的說明﹔\n"
"輸入 dpkg --help 以取得如何安裝和移除套件的說明。"

#: dpkg-deb/main.c:158
#, fuzzy, c-format
msgid "invalid integer for -%c: '%.250s'"
msgstr "--%s 所指定的數字無效：`%.250s'"

#: dpkg-deb/main.c:161
#, fuzzy, c-format
msgid "invalid compression level for -%c: %ld'"
msgstr "--%s 所指定的數字無效：`%.250s'"

#: dpkg-deb/main.c:171
#, fuzzy, c-format
#| msgid "unknown compression type `%s'!"
msgid "unknown compression strategy '%s'!"
msgstr "未知的壓縮類型 `%s'！"

#: dpkg-deb/main.c:179
#, c-format
msgid "unknown compression type `%s'!"
msgstr "未知的壓縮類型 `%s'！"

#: dpkg-deb/main.c:181
#, c-format
msgid "deprecated compression type '%s'; use xz instead"
msgstr ""

#: dpkg-deb/main.c:226
#, fuzzy, c-format
msgid "invalid compressor parameters: %s"
msgstr "--%s 所指定的數字無效：`%.250s'"

#: dpkg-split/info.c:55
#, c-format
msgid "file `%.250s' is corrupt - bad digit (code %d) in %s"
msgstr "檔案 `%1$.250s' 已損毀 - 在 %3$s 中有無效數字（代碼為 %2$d）"

#: dpkg-split/info.c:57
#, fuzzy, c-format
#| msgid "file `%.250s' is corrupt - bad digit (code %d) in %s"
msgid "file '%s' is corrupt; out of range integer in %s"
msgstr "檔案 `%1$.250s' 已損毀 - 在 %3$s 中有無效數字（代碼為 %2$d）"

#: dpkg-split/info.c:65
#, c-format
msgid "file `%.250s' is corrupt - %.250s missing"
msgstr "檔案 `%.250s' 已損毀 - 沒有 %.250s"

#: dpkg-split/info.c:68
#, c-format
msgid "file `%.250s' is corrupt - missing newline after %.250s"
msgstr "檔案 `%.250s' 已損毀 - 在 %.250s 後沒有換行符號"

#: dpkg-split/info.c:95 dpkg-split/main.c:117
#, c-format
msgid "error reading %.250s"
msgstr "在讀取 %.250s 時發生錯誤"

#: dpkg-split/info.c:109
#, c-format
msgid "file `%.250s' is corrupt - bad magic at end of first header"
msgstr "檔案 `%.250s' 已損毀 - 在第一個檔案標頭的末尾有不正確的識別碼"

#: dpkg-split/info.c:119
#, c-format
msgid "file `%.250s' is corrupt - bad padding character (code %d)"
msgstr "檔案 `%.250s' 已經損毀 - 不合宜的填充字元（代碼為 %d）"

#: dpkg-split/info.c:123
#, c-format
msgid "file `%.250s' is corrupt - nulls in info section"
msgstr "檔案 `%.250s' 已經損毀 - info 區段中有 null"

#: dpkg-split/info.c:129
#, fuzzy
msgid "format version number"
msgstr "版本編號"

#: dpkg-split/info.c:131
#, fuzzy, c-format
#| msgid "  %.250s is installed, but is version %.250s.\n"
msgid "file '%.250s' has invalid format version: %s"
msgstr "  已安裝了 %.250s，不過卻是版本 %.250s。\n"

#: dpkg-split/info.c:133
#, fuzzy, c-format
#| msgid ""
#| "file `%.250s' is format version `%.250s' - you need a newer dpkg-split"
msgid "file '%.250s' is format version %d.%d; get a newer dpkg-split"
msgstr "檔案 `%.250s' 的格式其版本為 `%.250s' - 您需使用較新版的 dpkg-split"

#: dpkg-split/info.c:136
msgid "package name"
msgstr ""

#: dpkg-split/info.c:137
#, fuzzy
msgid "package version number"
msgstr "版本編號"

#: dpkg-split/info.c:138
msgid "package file MD5 checksum"
msgstr ""

#: dpkg-split/info.c:141
#, c-format
msgid "file `%.250s' is corrupt - bad MD5 checksum `%.250s'"
msgstr "檔案 `%.250s' 已經損毀 - MD5 檢驗碼 `%.250s' 不符"

#: dpkg-split/info.c:143 dpkg-split/info.c:144
msgid "archive total size"
msgstr ""

#: dpkg-split/info.c:145 dpkg-split/info.c:146
msgid "archive part offset"
msgstr ""

#: dpkg-split/info.c:148
#, fuzzy
msgid "archive part numbers"
msgstr "版本編號"

#: dpkg-split/info.c:151
#, fuzzy, c-format
#| msgid "file `%.250s' is corrupt - no slash between part numbers"
msgid "file '%.250s' is corrupt - no slash between archive part numbers"
msgstr "檔案 `%.250s' 已經損毀 - 在分割號碼之間沒有斜線"

#: dpkg-split/info.c:154
msgid "number of archive parts"
msgstr ""

#: dpkg-split/info.c:156
#, fuzzy, c-format
msgid "file '%.250s' is corrupt - bad number of archive parts"
msgstr "檔案 `%.250s' 已經損毀 - 分割號碼不符"

#: dpkg-split/info.c:158
#, fuzzy
msgid "archive parts number"
msgstr "版本編號"

#: dpkg-split/info.c:160
#, fuzzy, c-format
#| msgid "file `%.250s' is corrupt - bad part number"
msgid "file '%.250s' is corrupt - bad archive part number"
msgstr "檔案 `%.250s' 已經損毀 - 分割號碼不符"

#: dpkg-split/info.c:166
msgid "package architecture"
msgstr ""

#: dpkg-split/info.c:175
#, c-format
msgid "file `%.250s' is corrupt - bad magic at end of second header"
msgstr "檔案 `%.250s' 已經損毀 - 在第二個標頭檔末尾的識別碼不正確"

#: dpkg-split/info.c:177
#, c-format
msgid "file `%.250s' is corrupt - second member is not data member"
msgstr "檔案 `%.250s' 已經損毀 - 第二個成員不是資料成員"

#: dpkg-split/info.c:183
#, c-format
msgid "file `%.250s' is corrupt - wrong number of parts for quoted sizes"
msgstr "檔案 `%.250s' 已經損毀 - 分割號碼和所宣稱的大小不相符"

#: dpkg-split/info.c:187
#, c-format
msgid "file `%.250s' is corrupt - size is wrong for quoted part number"
msgstr "檔案 `%.250s' 已經損毀 - 大小和所宣稱的分割號碼不相符"

#: dpkg-split/info.c:193
#, c-format
msgid "unable to fstat part file `%.250s'"
msgstr "無法 fstat 分割檔 `%.250s'"

#: dpkg-split/info.c:198
#, c-format
msgid "file `%.250s' is corrupt - too short"
msgstr "檔案 `%.250s' 已經損毀 - 檔案過小"

#: dpkg-split/info.c:211 dpkg-split/info.c:258
#, c-format
msgid "cannot open archive part file `%.250s'"
msgstr "無法開啟套件檔的分割檔 `%.250s'"

#: dpkg-split/info.c:213
#, c-format
msgid "file `%.250s' is not an archive part"
msgstr "檔案 `%.250s' 並非某個套件檔的分割檔"

#: dpkg-split/info.c:218
#, fuzzy, c-format
#| msgid ""
#| "%s:\n"
#| "    Part format version:            %s\n"
#| "    Part of package:                %s\n"
#| "        ... version:                %s\n"
#| "        ... MD5 checksum:           %s\n"
#| "        ... length:                 %lu bytes\n"
#| "        ... split every:            %lu bytes\n"
#| "    Part number:                    %d/%d\n"
#| "    Part length:                    %zi bytes\n"
#| "    Part offset:                    %lu bytes\n"
#| "    Part file size (used portion):  %lu bytes\n"
#| "\n"
msgid ""
"%s:\n"
"    Part format version:            %d.%d\n"
"    Part of package:                %s\n"
"        ... version:                %s\n"
"        ... architecture:           %s\n"
"        ... MD5 checksum:           %s\n"
"        ... length:                 %jd bytes\n"
"        ... split every:            %jd bytes\n"
"    Part number:                    %d/%d\n"
"    Part length:                    %jd bytes\n"
"    Part offset:                    %jd bytes\n"
"    Part file size (used portion):  %jd bytes\n"
"\n"
msgstr ""
"%s：\n"
"    分割檔格式的版本：              %s\n"
"    原始套件：                      %s\n"
"         ... 版本：                 %s\n"
"         ... MD5 檢驗碼：           %s\n"
"         ... 大小：                 %lu bytes\n"
"         ... 每個分割的大小：       %lu bytes\n"
"    分割檔的編號：                  %d/%d\n"
"    分割檔的長度：                  %zi bytes\n"
"    分割檔的偏移位置：              %lu bytes\n"
"    分割檔（會用到的部分）的大小：  %lu bytes\n"
"\n"

#: dpkg-split/info.c:234
#, fuzzy
#| msgid "<unknown>"
msgctxt "architecture"
msgid "<unknown>"
msgstr "<未知>"

#: dpkg-split/info.c:253 dpkg-split/join.c:110
#, fuzzy, c-format
msgid "--%s requires one or more part file arguments"
msgstr "--info 需要一個或多個分割檔的檔案名稱作為參數"

#: dpkg-split/info.c:264
#, c-format
msgid "file `%s' is not an archive part\n"
msgstr "檔案 `%s' 並不是套件檔的分割檔\n"

#: dpkg-split/join.c:45
#, c-format
msgid "Putting package %s together from %d part: "
msgid_plural "Putting package %s together from %d parts: "
msgstr[0] ""
msgstr[1] ""

#: dpkg-split/join.c:52
#, c-format
msgid "unable to open output file `%.250s'"
msgstr "無法開啟輸出檔 `%.250s'"

#: dpkg-split/join.c:58
#, c-format
msgid "unable to (re)open input part file `%.250s'"
msgstr "無法（重新）開啟做為輸入之用的分割檔 `%.250s'"

#: dpkg-split/join.c:60
#, fuzzy, c-format
#| msgid "Skipping deselected package %s.\n"
msgid "cannot skip split package header for '%s': %s"
msgstr "略過未被選取的套件 %s。\n"

#: dpkg-split/join.c:63
#, fuzzy, c-format
#| msgid "cannot stat new name `%s': %s"
msgid "cannot append split package part '%s' to '%s': %s"
msgstr "無法取得新名稱 `%s' 的資訊：%s"

#: dpkg-split/join.c:74 dpkg-split/split.c:243
#, c-format
msgid "done\n"
msgstr "完成\n"

#: dpkg-split/join.c:90
#, c-format
msgid "files `%.250s' and `%.250s' are not parts of the same file"
msgstr "檔案 `%.250s' 和 `%.250s' 並不同屬一個檔案的分割檔"

#: dpkg-split/join.c:95
#, c-format
msgid "there are several versions of part %d - at least `%.250s' and `%.250s'"
msgstr "第 %d 個分割檔有好幾個版本 - 至少有 `%.250s' 和 `%.250s'"

#: dpkg-split/join.c:133
#, c-format
msgid "part %d is missing"
msgstr "缺少第 %d 個分割檔"

#: dpkg-split/main.c:49
#, c-format
msgid "Debian `%s' package split/join tool; version %s.\n"
msgstr "Debian `%s' 套件切割/重組工具﹔版本 %s。\n"

#: dpkg-split/main.c:69
#, c-format
msgid ""
"Commands:\n"
"  -s|--split <file> [<prefix>]     Split an archive.\n"
"  -j|--join <part> <part> ...      Join parts together.\n"
"  -I|--info <part> ...             Display info about a part.\n"
"  -a|--auto -o <complete> <part>   Auto-accumulate parts.\n"
"  -l|--listq                       List unmatched pieces.\n"
"  -d|--discard [<filename> ...]    Discard unmatched pieces.\n"
"\n"
msgstr ""
"指令：\n"
"  -s|--split <檔案> [<前綴>]       切割套件檔。\n"
"  -j|--join <分割檔> <分割檔> ...  結合分割檔。\n"
"  -I|--info <分割檔> ...           顯示某個分割檔的資訊。\n"
"  -a|--auto -o <結合檔> <分割檔>   自動結合分割檔。\n"
"  -l|--listq                       列出不相符的部份。\n"
"  -d|--discard [<檔案名稱> ...]    捨棄不相符的部份。\n"
"\n"

#: dpkg-split/main.c:84
#, fuzzy, c-format
#| msgid ""
#| "Options:\n"
#| "  --depotdir <directory>           Use <directory> instead of %s/%s.\n"
#| "  -S|--partsize <size>             In KiB, for -s (default is 450).\n"
#| "  -o|--output <file>               For -j (default is <package>-<version>."
#| "deb).\n"
#| "  -Q|--npquiet                     Be quiet when -a is not a part.\n"
#| "  --msdos                          Generate 8.3 filenames.\n"
#| "\n"
#| "Exit status: 0 = OK;  1 = -a is not a part;  2 = trouble!\n"
msgid ""
"Options:\n"
"  --depotdir <directory>           Use <directory> instead of %s/%s.\n"
"  -S|--partsize <size>             In KiB, for -s (default is 450).\n"
"  -o|--output <file>               Filename, for -j (default is\n"
"                                     <package>_<version>_<arch>.deb).\n"
"  -Q|--npquiet                     Be quiet when -a is not a part.\n"
"  --msdos                          Generate 8.3 filenames.\n"
"\n"
msgstr ""
"選項：\n"
"  --depotdir <目錄>                使用 <目錄> 來取代 %s/%s。\n"
"  -S/--partsize <大小>             單位為 KiB，用於 -s（預設為 450）。\n"
"  -o/--output <檔案>               用於 -j（預設為 <套件名>-<版本>.deb）。\n"
"  -Q|--npquiet                     當未指定 -a 時，不顯示訊息。\n"
"  --msdos                          產生 8.3 的檔名。\n"
"\n"
"離開狀態：0 = OK； 1 = 未指定 -a；2 = 發生錯誤！\n"

#: dpkg-split/main.c:94
#, c-format
msgid ""
"Exit status:\n"
"  0 = ok\n"
"  1 = with --auto, file is not a part\n"
"  2 = trouble\n"
msgstr ""

#: dpkg-split/main.c:105
msgid "Type dpkg-split --help for help."
msgstr "輸入 dpkg-split --help 以取得說明。"

#: dpkg-split/main.c:118
#, c-format
msgid "unexpected end of file in %.250s"
msgstr "在 %.250s 中有預期之外的檔案結束符號"

#: dpkg-split/main.c:130
msgid "part size is far too large or is not positive"
msgstr "分割檔的大小已遠遠過長或非正數"

#: dpkg-split/main.c:134
#, fuzzy, c-format
msgid "part size must be at least %d KiB (to allow for header)"
msgstr "分割檔的大小至少必須大於 %dk（為了容下標頭資訊）"

#: dpkg-split/queue.c:93
#, c-format
msgid "unable to read depot directory `%.250s'"
msgstr "無法讀取暫存目錄 `%.250s'"

#: dpkg-split/queue.c:140
msgid "--auto requires the use of the --output option"
msgstr "--auto 需要與 --output 一同使用"

#: dpkg-split/queue.c:142
msgid "--auto requires exactly one part file argument"
msgstr "--auto 只需一個分割檔的名稱作為參數"

#: dpkg-split/queue.c:146
#, c-format
msgid "unable to read part file `%.250s'"
msgstr "無法讀取分割檔 `%.250s'"

#: dpkg-split/queue.c:149
#, c-format
msgid "File `%.250s' is not part of a multipart archive.\n"
msgstr "檔案 `%.250s' 並非套件檔中的一個分割檔。\n"

#: dpkg-split/queue.c:186
#, c-format
msgid "unable to reopen part file `%.250s'"
msgstr "無法重新開啟分割檔 `%.250s'"

#: dpkg-split/queue.c:189
#, c-format
msgid "unable to open new depot file `%.250s'"
msgstr "無法開啟新的暫存檔 `%.250s'"

#: dpkg-split/queue.c:192
#, fuzzy, c-format
#| msgid "cannot stat old name `%s': %s"
msgid "cannot extract split package part '%s': %s"
msgstr "無法取得原本名稱 `%s' 的資訊：%s"

#: dpkg-split/queue.c:201
#, c-format
msgid "unable to rename new depot file `%.250s' to `%.250s'"
msgstr "無法將新的暫存檔 `%.250s' 重新命名為 `%.250s'"

#: dpkg-split/queue.c:205
#, c-format
msgid "Part %d of package %s filed (still want "
msgstr "已收集 %d 個套件 %s 的分割檔（尚需 "

#: dpkg-split/queue.c:209
msgid " and "
msgstr " 和 "

#: dpkg-split/queue.c:223
#, c-format
msgid "unable to delete used-up depot file `%.250s'"
msgstr "無法刪除用畢的暫存檔 `%.250s'"

#: dpkg-split/queue.c:244
msgid "Junk files left around in the depot directory:\n"
msgstr "在暫存目錄中留下了一些多餘檔案：\n"

#: dpkg-split/queue.c:249 dpkg-split/queue.c:278
#, c-format
msgid "unable to stat `%.250s'"
msgstr "無法取得 `%.250s' 的狀態"

#: dpkg-split/queue.c:252
#, fuzzy, c-format
#| msgid " %s (%lu bytes)\n"
msgid " %s (%jd bytes)\n"
msgstr " %s (%lu bytes)\n"

#: dpkg-split/queue.c:254
#, c-format
msgid " %s (not a plain file)\n"
msgstr " %s（並非一般檔案）\n"

#: dpkg-split/queue.c:259
msgid "Packages not yet reassembled:\n"
msgstr "套件尚未結合完畢：\n"

#: dpkg-split/queue.c:267
#, c-format
msgid " Package %s: part(s) "
msgstr ""

#: dpkg-split/queue.c:280
#, c-format
msgid "part file `%.250s' is not a plain file"
msgstr "分割檔 `%.250s' 並非一般檔案"

#: dpkg-split/queue.c:287
#, fuzzy, c-format
#| msgid "(total %lu bytes)\n"
msgid "(total %jd bytes)\n"
msgstr "（合計 %lu bytes）\n"

#: dpkg-split/queue.c:313
#, c-format
msgid "unable to discard `%.250s'"
msgstr "無法忽略 `%.250s'"

#: dpkg-split/queue.c:314
#, c-format
msgid "Deleted %s.\n"
msgstr "已刪除 %s。\n"

#: dpkg-split/split.c:71 dpkg-split/split.c:84
msgid "package field value extraction"
msgstr ""

#: dpkg-split/split.c:78
#, fuzzy, c-format
#| msgid "cannot stat old name `%s': %s"
msgid "cannot extract package field value from '%s': %s"
msgstr "無法取得原本名稱 `%s' 的資訊：%s"

#: dpkg-split/split.c:135
#, c-format
msgid "unable to open source file `%.250s'"
msgstr "無法開啟來源檔 `%.250s'"

#: dpkg-split/split.c:137
msgid "unable to fstat source file"
msgstr "無法 fstat 來源檔"

#: dpkg-split/split.c:139
#, c-format
msgid "source file `%.250s' not a plain file"
msgstr "來源檔 `%.250s' 並非一般檔案"

#: dpkg-split/split.c:159
#, c-format
msgid "Splitting package %s into %d part: "
msgid_plural "Splitting package %s into %d parts: "
msgstr[0] ""
msgstr[1] ""

#: dpkg-split/split.c:199
msgid ""
"header is too long, making part too long; the package name or version\n"
"numbers must be extraordinarily long, or something; giving up"
msgstr ""

#: dpkg-split/split.c:255
msgid "--split needs a source filename argument"
msgstr "--split 需要一個來源檔作為參數"

#: dpkg-split/split.c:258
msgid "--split takes at most a source filename and destination prefix"
msgstr "--split 最多需要一個來源檔和目的路徑前綴做為參數"

#: utils/update-alternatives.c:96
#, fuzzy, c-format
#| msgid ""
#| "Usage: %s [<option> ...] <command>\n"
#| "\n"
#| "Commands:\n"
#| "  --install <link> <name> <path> <priority>\n"
#| "    [--slave <link> <name> <path>] ...\n"
#| "                           add a group of alternatives to the system.\n"
#| "  --remove <name> <path>   remove <path> from the <name> group "
#| "alternative.\n"
#| "  --remove-all <name>      remove <name> group from the alternatives "
#| "system.\n"
#| "  --auto <name>            switch the master link <name> to automatic "
#| "mode.\n"
#| "  --display <name>         display information about the <name> group.\n"
#| "  --list <name>            display all targets of the <name> group.\n"
#| "  --config <name>          show alternatives for the <name> group and ask "
#| "the\n"
#| "                           user to select which one to use.\n"
#| "  --set <name> <path>      set <path> as alternative for <name>.\n"
#| "  --all                    call --config on all alternatives.\n"
#| "\n"
#| "<link> is the symlink pointing to %s/<name>.\n"
#| "  (e.g. /usr/bin/pager)\n"
#| "<name> is the master name for this link group.\n"
#| "  (e.g. pager)\n"
#| "<path> is the location of one of the alternative target files.\n"
#| "  (e.g. /usr/bin/less)\n"
#| "<priority> is an integer; options with higher numbers have higher "
#| "priority in\n"
#| "  automatic mode.\n"
#| "\n"
#| "Options:\n"
#| "  --altdir <directory>     change the alternatives directory.\n"
#| "  --admindir <directory>   change the administrative directory.\n"
#| "  --verbose                verbose operation, more output.\n"
#| "  --quiet                  quiet operation, minimal output.\n"
#| "  --help                   show this help message.\n"
#| "  --version                show the version.\n"
msgid ""
"Commands:\n"
"  --install <link> <name> <path> <priority>\n"
"    [--slave <link> <name> <path>] ...\n"
"                           add a group of alternatives to the system.\n"
"  --remove <name> <path>   remove <path> from the <name> group alternative.\n"
"  --remove-all <name>      remove <name> group from the alternatives "
"system.\n"
"  --auto <name>            switch the master link <name> to automatic mode.\n"
"  --display <name>         display information about the <name> group.\n"
"  --query <name>           machine parseable version of --display <name>.\n"
"  --list <name>            display all targets of the <name> group.\n"
"  --get-selections         list master alternative names and their status.\n"
"  --set-selections         read alternative status from standard input.\n"
"  --config <name>          show alternatives for the <name> group and ask "
"the\n"
"                           user to select which one to use.\n"
"  --set <name> <path>      set <path> as alternative for <name>.\n"
"  --all                    call --config on all alternatives.\n"
"\n"
msgstr ""
"用法：%s [<選項> ...] <命令>\n"
"\n"
"指令:\n"
"  --install <連結> <名稱> <檔案路徑> <優先等級>\n"
"    [--slave <連結> <名稱> <檔案路徑>] ...\n"
"                             新增一系列的可替換指令到系統裡。\n"
"  --remove <名稱> <檔案路徑> 從可替換指令 <名稱> 群組裡移除 <檔案路徑>。\n"
"  --remove-all <名稱>        由可替換指令系統裡移除 <名稱> 群組。\n"
"  --auto <名稱>              將主要連結 <名稱> 切換為自動模式。\n"
"  --display <名稱>           顯示 <名稱> 群組的資訊。\n"
"  --list <名稱>              顯示 <名稱> 群組所指向的程式。\n"
"  --config <名稱>            顯示 <名稱> 群組的可替換指令，\n"
"                             並讓使用者選擇要用哪一個。\n"
"  --set <名稱> <檔案路徑>    將 <檔案路徑> 加入 <名稱> 可替換指令。\n"
"  --all                      在所有的可替換指令上呼叫 --config。\n"
"\n"
"<連結> 是指向 %s/<名稱> 的符號連結。\n"
"  （例如 /usr/bin/pager）\n"
"<名稱> 是這個連結群組的主要名稱。\n"
"  （例如 pager）\n"
"<檔案路徑> 是某個可替換指令所指向的檔案位置。\n"
"  （例如 /usr/bin/less）\n"
"<優先等級> 是個整數，擁有較高數字的在自動模式裡會有較高的優先等級。\n"
"\n"
"選項：\n"
"  --altdir <目錄>          改變可替換指令的目錄。\n"
"  --admindir <目錄>        改變管理目錄。\n"
"  --verbose                詳盡的操作過程，會輸出更多的資訊。\n"
"  --quiet                  安靜模式，儘量不顯示訊息。\n"
"  --help                   顯示這個說明訊息。\n"
"  --version                顯示版本資訊。\n"

#: utils/update-alternatives.c:115
#, c-format
msgid ""
"<link> is the symlink pointing to %s/<name>.\n"
"  (e.g. /usr/bin/pager)\n"
"<name> is the master name for this link group.\n"
"  (e.g. pager)\n"
"<path> is the location of one of the alternative target files.\n"
"  (e.g. /usr/bin/less)\n"
"<priority> is an integer; options with higher numbers have higher priority "
"in\n"
"  automatic mode.\n"
"\n"
msgstr ""

#: utils/update-alternatives.c:126
#, fuzzy, c-format
msgid ""
"Options:\n"
"  --altdir <directory>     change the alternatives directory.\n"
"  --admindir <directory>   change the administrative directory.\n"
"  --log <file>             change the log file.\n"
"  --force                  allow replacing files with alternative links.\n"
"  --skip-auto              skip prompt for alternatives correctly "
"configured\n"
"                           in automatic mode (relevant for --config only)\n"
"  --verbose                verbose operation, more output.\n"
"  --quiet                  quiet operation, minimal output.\n"
"  --help                   show this help message.\n"
"  --version                show the version.\n"
msgstr ""
"用法：%s [<選項> ...] <命令>\n"
"\n"
"命令：\n"
"  --add <擁有者> <群組> <模式> <檔案>\n"
"                           新增一個新項目至資料庫。\n"
"  --remove <檔案>          由資料庫中移除檔案。\n"
"  --list [<比對表達式>]    列出目前資料庫中的強制選項。\n"
"\n"
"選項：\n"
"  --admindir <目錄>        設定 statoverride 檔所使用的目錄。\n"
"  --update                 立即更新檔案權限。\n"
"  --force                  即使未能通過完整檢驗，也強制進行某個動作。\n"
"  --quiet                  安靜模式，儘量不顯示訊息。\n"
"  --help                   顯示這個說明訊息。\n"
"  --version                顯示版本資訊。\n"

#: utils/update-alternatives.c:145 utils/update-alternatives.c:158
msgid "error"
msgstr ""

#: utils/update-alternatives.c:188
#, fuzzy
msgid "warning"
msgstr "中止操作"

#: utils/update-alternatives.c:257
#, fuzzy, c-format
#| msgid "realloc failed (%zu bytes)"
msgid "malloc failed (%zu bytes)"
msgstr "realloc 失敗（%zu 位元組）"

#: utils/update-alternatives.c:351
#, fuzzy, c-format
#| msgid "two commands specified: %s and --%s"
msgid "two commands specified: --%s and --%s"
msgstr "指定了兩個指令：%s 以及 --%s"

#: utils/update-alternatives.c:383
#, fuzzy, c-format
#| msgid "cannot open diversions: %s"
msgid "cannot append to '%s'"
msgstr "無法開啟抽換項目：%s"

#: utils/update-alternatives.c:506
#, fuzzy, c-format
#| msgid "unable to remove %s: %s"
msgid "unable to remove '%s'"
msgstr "無法移除 %s：%s"

#: utils/update-alternatives.c:1101
#, fuzzy, c-format
msgid "unexpected end of file while trying to read %s"
msgstr "在 %2$.255s 中的 %1$s 有預期之外的檔案結束符號"

#: utils/update-alternatives.c:1103
#, fuzzy, c-format
msgid "while reading %s: %s"
msgstr "無法讀取 %s：%s"

#: utils/update-alternatives.c:1109
#, fuzzy, c-format
msgid "line not terminated while trying to read %s"
msgstr "在 %2$.255s 中的 %1$s 有預期之外的檔案結束符號"

#: utils/update-alternatives.c:1127
#, fuzzy, c-format
msgid "%s corrupt: %s"
msgstr "內部錯誤：%s 損毀：%s"

#: utils/update-alternatives.c:1140
#, c-format
msgid "newlines prohibited in update-alternatives files (%s)"
msgstr "在 update-alternatives 檔 (%s) 裡不可有換行符號"

#: utils/update-alternatives.c:1153
msgid "slave name"
msgstr ""

#: utils/update-alternatives.c:1161 utils/update-alternatives.c:2553
#, fuzzy, c-format
#| msgid "duplicate slave %s"
msgid "duplicate slave name %s"
msgstr "重複的次要 %s"

#: utils/update-alternatives.c:1164
#, fuzzy
msgid "slave link"
msgstr "重複的次要連結 %s"

#: utils/update-alternatives.c:1168
#, c-format
msgid "slave link same as main link %s"
msgstr "次要連結與主要連結 %s 相同"

#: utils/update-alternatives.c:1175 utils/update-alternatives.c:2560
#, c-format
msgid "duplicate slave link %s"
msgstr "重複的次要連結 %s"

#: utils/update-alternatives.c:1193
msgid "master file"
msgstr ""

#: utils/update-alternatives.c:1202
#, c-format
msgid "duplicate path %s"
msgstr "重複的路徑 %s"

#: utils/update-alternatives.c:1215
#, fuzzy, c-format
msgid ""
"alternative %s (part of link group %s) doesn't exist; removing from list of "
"alternatives"
msgstr "%s 的替換項目指向了 %s - 但卻找不到。將其從替換項目列表中移除。"

#: utils/update-alternatives.c:1218 utils/update-alternatives.c:1229
#, fuzzy
msgid "priority"
msgstr "優先權 %s %s"

#: utils/update-alternatives.c:1221 utils/update-alternatives.c:1243
msgid "slave file"
msgstr ""

#: utils/update-alternatives.c:1234
#, fuzzy, c-format
msgid "priority of %s: %s"
msgstr "優先權 %s %s"

#: utils/update-alternatives.c:1238
#, fuzzy, c-format
msgid "priority of %s is out of range: %s"
msgstr "優先權 %s %s"

#: utils/update-alternatives.c:1292
msgid "status"
msgstr ""

#: utils/update-alternatives.c:1294
#, fuzzy
msgid "invalid status"
msgstr "無效的更新模式"

#: utils/update-alternatives.c:1299
#, fuzzy
msgid "master link"
msgstr "重複的次要連結 %s"

#: utils/update-alternatives.c:1343
#, fuzzy, c-format
msgid "discarding obsolete slave link %s (%s)"
msgstr "捨棄已廢棄的次要連結 %s (%s)。"

#: utils/update-alternatives.c:1399
#, fuzzy, c-format
msgid "unable to flush file '%s'"
msgstr "無法在 vsnprintf 裡進行刷新"

#: utils/update-alternatives.c:1491 utils/update-alternatives.c:1558
#: utils/update-alternatives.c:2270
msgid "auto mode"
msgstr ""

#: utils/update-alternatives.c:1491 utils/update-alternatives.c:1567
#: utils/update-alternatives.c:2271
msgid "manual mode"
msgstr ""

#: utils/update-alternatives.c:1494
#, fuzzy, c-format
msgid "  link currently points to %s"
msgstr " 目前的連結是指向 %s"

#: utils/update-alternatives.c:1497
#, fuzzy
msgid "  link currently absent"
msgstr " 連結目前失效"

#: utils/update-alternatives.c:1501
#, fuzzy, c-format
#| msgid "%s - priority %s"
msgid "%s - priority %d"
msgstr "%s - 優先權 %s"

#: utils/update-alternatives.c:1504
#, fuzzy, c-format
msgid "  slave %s: %s"
msgstr " 次要 %s：%s"

#: utils/update-alternatives.c:1511
#, fuzzy, c-format
msgid "Current 'best' version is '%s'."
msgstr "目前 `最佳' 的版本為 %s。"

#: utils/update-alternatives.c:1513
msgid "No versions available."
msgstr "沒有可用的版本。"

#: utils/update-alternatives.c:1542
#, c-format
msgid "There is %d choice for the alternative %s (providing %s)."
msgid_plural "There are %d choices for the alternative %s (providing %s)."
msgstr[0] ""
msgstr[1] ""

#: utils/update-alternatives.c:1549
#, fuzzy
msgid "Selection"
msgstr "簡介"

#: utils/update-alternatives.c:1550
msgid "Path"
msgstr ""

#: utils/update-alternatives.c:1550
#, fuzzy
msgid "Priority"
msgstr "優先權 %s %s"

#: utils/update-alternatives.c:1550
msgid "Status"
msgstr ""

#: utils/update-alternatives.c:1571
#, fuzzy, c-format
msgid "Press enter to keep the current choice[*], or type selection number: "
msgstr "請按下 [enter] 使用預設值[*]，或輸入選擇號碼："

#: utils/update-alternatives.c:1725
#, c-format
msgid "not replacing %s with a link"
msgstr ""

#: utils/update-alternatives.c:1766
#, c-format
msgid "can't install unknown choice %s"
msgstr ""

#: utils/update-alternatives.c:1784
#, c-format
msgid ""
"skip creation of %s because associated file %s (of link group %s) doesn't "
"exist"
msgstr ""

#: utils/update-alternatives.c:1794
#, c-format
msgid "not removing %s since it's not a symlink"
msgstr ""

#: utils/update-alternatives.c:2069 utils/update-alternatives.c:2075
#, c-format
msgid "Call %s."
msgstr ""

#: utils/update-alternatives.c:2079
#, c-format
msgid "Alternative %s unchanged because choice %s is not available."
msgstr ""

#: utils/update-alternatives.c:2083
#, fuzzy, c-format
msgid "Skip unknown alternative %s."
msgstr "找不到可替換程式 `%s'。"

#: utils/update-alternatives.c:2110
#, fuzzy, c-format
msgid "line too long or not terminated while trying to read %s"
msgstr "在 %2$.255s 中的 %1$s 有預期之外的檔案結束符號"

#: utils/update-alternatives.c:2123 utils/update-alternatives.c:2136
#: utils/update-alternatives.c:2146
#, c-format
msgid "Skip invalid line: %s"
msgstr ""

#: utils/update-alternatives.c:2171
#, c-format
msgid "%s/%s is dangling; it will be updated with best choice"
msgstr ""

#: utils/update-alternatives.c:2175
#, fuzzy, c-format
msgid ""
"%s/%s has been changed (manually or by a script); switching to manual "
"updates only"
msgstr ""
"%s 已有更動（手動或被某個 script 修改）。\n"
"切換成僅能手動更新。"

#: utils/update-alternatives.c:2183
#, fuzzy, c-format
msgid "setting up automatic selection of %s"
msgstr "正在設定 %s 的自動選擇。"

#: utils/update-alternatives.c:2199
#, fuzzy, c-format
msgid "renaming %s link from %s to %s"
msgstr "正在將 %s 連結由 %s 更名為 %s。"

#: utils/update-alternatives.c:2240
#, fuzzy, c-format
msgid "renaming %s slave link from %s to %s"
msgstr "正在將 %s 次要連結由 %s 更名為 %s。"

#: utils/update-alternatives.c:2268
#, fuzzy, c-format
msgid "using %s to provide %s (%s) in %s"
msgstr "以 '%s' 提供 '%s'。"

#: utils/update-alternatives.c:2276
#, c-format
msgid ""
"forcing reinstallation of alternative %s because link group %s is broken"
msgstr ""

#: utils/update-alternatives.c:2283
#, c-format
msgid "current alternative %s is unknown, switching to %s for link group %s"
msgstr ""

#: utils/update-alternatives.c:2309
#, c-format
msgid "alternative name (%s) must not contain '/' and spaces"
msgstr ""

#: utils/update-alternatives.c:2317
#, c-format
msgid "alternative link is not absolute as it should be: %s"
msgstr ""

#: utils/update-alternatives.c:2325
#, c-format
msgid "alternative path is not absolute as it should be: %s"
msgstr ""

#: utils/update-alternatives.c:2356
#, c-format
msgid "alternative %s can't be master: it is a slave of %s"
msgstr ""

#: utils/update-alternatives.c:2364 utils/update-alternatives.c:2400
#, c-format
msgid "alternative link %s is already managed by %s"
msgstr ""

#: utils/update-alternatives.c:2370
#, fuzzy, c-format
msgid "alternative path %s doesn't exist"
msgstr "警告：己設定為 --update 但 %s 不存在"

#: utils/update-alternatives.c:2387
#, fuzzy, c-format
msgid "alternative %s can't be slave of %s: it is a master alternative"
msgstr "%s 的替換項目指向了 %s - 但卻找不到。將其從替換項目列表中移除。"

#: utils/update-alternatives.c:2391
#, c-format
msgid "alternative %s can't be slave of %s: it is a slave of %s"
msgstr ""

#: utils/update-alternatives.c:2411
#, c-format
msgid "alternative link %s is already managed by %s (slave of %s)"
msgstr ""

#: utils/update-alternatives.c:2455
#, c-format
msgid "unknown argument `%s'"
msgstr "未知參數 `%s'"

#: utils/update-alternatives.c:2474
msgid "--install needs <link> <name> <path> <priority>"
msgstr "--install 要有 <連結> <名稱> <檔案路徑> <優先權>"

#: utils/update-alternatives.c:2480 utils/update-alternatives.c:2545
msgid "<link> and <path> can't be the same"
msgstr ""

#: utils/update-alternatives.c:2484
msgid "priority must be an integer"
msgstr "優先權必須為整數"

#: utils/update-alternatives.c:2488
#, c-format
msgid "priority is out of range: %s clamped to %ld"
msgstr ""

#: utils/update-alternatives.c:2504
#, c-format
msgid "--%s needs <name> <path>"
msgstr "--%s 要有 <名稱> <檔案路徑>"

#: utils/update-alternatives.c:2521
#, c-format
msgid "--%s needs <name>"
msgstr "--%s 要有 <名稱>"

#: utils/update-alternatives.c:2536
msgid "--slave only allowed with --install"
msgstr "--slave 只能搭配 --install 使用"

#: utils/update-alternatives.c:2538
msgid "--slave needs <link> <name> <path>"
msgstr "--slave 要有 <連結> <名稱> <檔案路徑>"

#: utils/update-alternatives.c:2547
#, c-format
msgid "name %s is both primary and slave"
msgstr "名稱 %s 同時是主要及次要"

#: utils/update-alternatives.c:2550
#, c-format
msgid "link %s is both primary and slave"
msgstr "連結 %s 同時是主要及次要"

#: utils/update-alternatives.c:2570
#, fuzzy, c-format
msgid "--%s needs a <file> argument"
msgstr "--%s 需要一個參數"

#: utils/update-alternatives.c:2596
#, c-format
msgid "unknown option `%s'"
msgstr "未知選項 `%s'"

#: utils/update-alternatives.c:2601
#, fuzzy
msgid ""
"need --display, --query, --list, --get-selections, --config, --set, --set-"
"selections, --install, --remove, --all, --remove-all or --auto"
msgstr ""
"要有 --display, --config, --set, --install, --remove, --all, --remove-all 或 "
"--auto"

#: utils/update-alternatives.c:2617 utils/update-alternatives.c:2623
#, fuzzy, c-format
msgid "no alternatives for %s"
msgstr "沒有 %s 的替換檔。"

#: utils/update-alternatives.c:2640
#, fuzzy
#| msgid "read error on standard input"
msgid "<standard input>"
msgstr "從標準輸入讀取資料時發生錯誤"

#: utils/update-alternatives.c:2662
#, fuzzy, c-format
msgid "alternative %s for %s not registered; not setting"
msgstr "%2$s 的替換項目 %1$s 沒有註冊，無法移除。"

#: utils/update-alternatives.c:2668 utils/update-alternatives.c:2674
#, fuzzy, c-format
msgid "There is no program which provides %s."
msgstr ""
"沒有程式有提供 %s。\n"
"毋需任何設定。\n"

#: utils/update-alternatives.c:2676 utils/update-alternatives.c:2684
msgid "Nothing to configure."
msgstr ""

#: utils/update-alternatives.c:2682
#, c-format
msgid "There is only one alternative in link group %s (providing %s): %s"
msgstr ""

#: utils/update-alternatives.c:2692
#, fuzzy, c-format
msgid "alternative %s for %s not registered; not removing"
msgstr "%2$s 的替換項目 %1$s 沒有註冊，無法移除。"

#: utils/update-alternatives.c:2700
#, fuzzy, c-format
msgid "removing manually selected alternative - switching %s to auto mode"
msgstr "正在移除由手動所選擇的替代指令 - 切換為自動模式"

#: utils/update-alternatives.c:2725
#, fuzzy, c-format
msgid "automatic updates of %s/%s are disabled; leaving it alone"
msgstr "%s 的自動更新已被停用，不做變更。"

#: utils/update-alternatives.c:2727
#, fuzzy, c-format
msgid "to return to automatic updates use '%s --auto %s'"
msgstr "若要回復成自動更新，請執行 `update-alternatives --auto %s'。"

#, fuzzy
#~| msgid "--add needs four arguments"
#~ msgid "--%s needs at two arguments"
#~ msgstr "--add 需要四個參數"

#, fuzzy
#~ msgid "ar member file (%s)"
#~ msgstr "無法建立臨時檔 (data)"

#, fuzzy
#~ msgid "failed to read on buffer copy for %s"
#~ msgstr "buffer_copy (%s) 失敗"

#, fuzzy
#~ msgid "failed in write on buffer copy for %s"
#~ msgstr "buffer_copy (%s) 失敗"

#, fuzzy
#~ msgid "short read on buffer copy for %s"
#~ msgstr "buffer_copy (%s) 未讀完所有資料"

#~ msgid "%s: decompression"
#~ msgstr "%s：解壓縮"

#~ msgid "%s: compression"
#~ msgstr "%s：壓縮"

#, fuzzy
#~| msgid "%d files and directories currently installed.)\n"
#~ msgid "a value different from 'any' is currently not allowed"
#~ msgstr "系統目前共安裝了 %d 個檔案和目錄。）\n"

#~ msgid "Closing brace missing in format\n"
#~ msgstr "在格式中少了右括號\n"

#~ msgid "backend dpkg-deb during `%.255s'"
#~ msgstr "在這期間會以 dpkg-deb 進行 `%.255s'"

#~ msgid "md5hash"
#~ msgstr "md5hash"

#~ msgid "failed to write to pipe in copy"
#~ msgstr "在複製時無法寫入管線"

#~ msgid "failed to close pipe in copy"
#~ msgstr "在複製時無法關閉管線"

#~ msgid "data"
#~ msgstr "data"

#, fuzzy
#~| msgid "missing package"
#~ msgid "split package part"
#~ msgstr "找不到套件"

#, fuzzy
#~ msgid "failed to open '%s' for writing %s database"
#~ msgstr "無法開啟 `%s' 以寫入 %s 資訊"

#, fuzzy
#~ msgid "failed to flush %s database to '%.250s'"
#~ msgstr "無法刷新 %s 資訊至 `%.250s'"

#, fuzzy
#~ msgid "failed to fsync %s database to '%.250s'"
#~ msgstr "無法同步 %s 資訊至 `%.250s'"

#, fuzzy
#~ msgid "failed to close '%.250s' after writing %s database"
#~ msgstr "在寫入 %2$s 資訊之後，無法關閉 `%1$.250s'"

#, fuzzy
#~ msgid "failed to link '%.250s' to '%.250s' for backup of %s database"
#~ msgstr "無法將 `%.250s' 指向 `%.250s' 以做為 %s 的備份之用"

#, fuzzy
#~ msgid "failed to install '%.250s' as '%.250s' containing %s database"
#~ msgstr "無法將 `%.250s' 安裝為 `%.250s' 以包含 %s 資訊"

#~ msgid "realloc failed (%zu bytes)"
#~ msgstr "realloc 失敗（%zu 位元組）"

#~ msgid "unable to write new trigger interest file `%.250s'"
#~ msgstr "無法寫入新的 trigger interest 檔 `%.250s'"

#, fuzzy
#~ msgid "unable to flush new trigger interest file '%.250s'"
#~ msgstr "無法建立新的 trigger interest 檔 `%.250s'"

#, fuzzy
#~ msgid "unable to sync new trigger interest file '%.250s'"
#~ msgstr "無法建立新的 trigger interest 檔 `%.250s'"

#~ msgid "unable to install new trigger interest file `%.250s'"
#~ msgstr "無法安裝新的 trigger interest 檔 `%.250s'"

#~ msgid "unable to create new trigger interest file `%.250s'"
#~ msgstr "無法建立新的 trigger interest 檔 `%.250s'"

#, fuzzy
#~ msgid "unable to close new trigger interest file `%.250s'"
#~ msgstr "無法建立新的 trigger interest 檔 `%.250s'"

#~ msgid "unable to create new file triggers file `%.250s'"
#~ msgstr "無法建立新的 file trigger 檔 `%.250s'"

#~ msgid "unable to write new file triggers file `%.250s'"
#~ msgstr "無法寫入新的 file trigger 檔 `%.250s'"

#, fuzzy
#~ msgid "unable to flush new file triggers file '%.250s'"
#~ msgstr "無法建立新的 file trigger 檔 `%.250s'"

#, fuzzy
#~ msgid "unable to sync new file triggers file '%.250s'"
#~ msgstr "無法建立新的 file trigger 檔 `%.250s'"

#, fuzzy
#~ msgid "unable to close new file triggers file `%.250s'"
#~ msgstr "無法建立新的 file trigger 檔 `%.250s'"

#~ msgid "unable to install new file triggers file as `%.250s'"
#~ msgstr "無法將新的 file trigger 檔安裝為 `%.250s'"

#, fuzzy
#~| msgid ""
#~| "\n"
#~| "Copyright (C) 1995 Ian Jackson.\n"
#~| "Copyright (C) 2000,2001 Wichert Akkerman."
#~ msgid ""
#~ "Copyright (C) 1995 Ian Jackson.\n"
#~ "Copyright (C) 2000,2001 Wichert Akkerman.\n"
#~ "Copyright (C) 2010 Guillem Jover.\n"
#~ msgstr ""
#~ "\n"
#~ "Copyright (C) 1995 Ian Jackson.\n"
#~ "Copyright (C) 2000,2001 Wichert Akkerman."

#, fuzzy
#~| msgid "cannot open GPL file"
#~ msgid "cannot create new %s file"
#~ msgstr "無法開啟 GPL 檔"

#, fuzzy
#~ msgid "error creating new diversions-old"
#~ msgstr "在建立新的 statoverride-old 時發生錯誤：%s"

#~ msgid "unable to create updated files list file for package %s"
#~ msgstr "無法為套件 %s 建立更新後的檔案列表檔"

#~ msgid "failed to write to updated files list file for package %s"
#~ msgstr "無法寫入更新後的套件 %s 的檔案列表檔"

#~ msgid "failed to flush updated files list file for package %s"
#~ msgstr "無法刷新更新後的套件 %s 的檔案列表檔"

#~ msgid "failed to sync updated files list file for package %s"
#~ msgstr "無法同步更新後的套件 %s 的檔案列表檔"

#~ msgid "failed to close updated files list file for package %s"
#~ msgstr "無法關閉更新後的套件 %s 的檔案列表檔"

#~ msgid "failed to install updated files list file for package %s"
#~ msgstr "無法安裝更新後的套件 %s 的檔案列表檔"

#~ msgid "--command-fd takes one argument, not zero"
#~ msgstr "--command-fd 需要一個參數，而不是沒有"

#~ msgid "--command-fd only takes one argument"
#~ msgstr "--command-fd 只需一個參數"

#, fuzzy
#~ msgid ""
#~ "Copyright (C) 2000, 2001 Wichert Akkerman.\n"
#~ "Copyright (C) 2006-2009 Guillem Jover.\n"
#~ msgstr ""
#~ "\n"
#~ "Copyright (C) 1995 Ian Jackson.\n"
#~ "Copyright (C) 2000-2002 Wichert Akkerman."

#, fuzzy
#~ msgid "cannot open new statoverride file"
#~ msgstr "無法開啟新的 statoverride 檔：%s"

#, fuzzy
#~ msgid "error removing statoverride-old"
#~ msgstr "在移除 statoverride-old 時發生錯誤：%s"

#, fuzzy
#~ msgid "error creating new statoverride-old"
#~ msgstr "在建立新的 statoverride-old 時發生錯誤：%s"

#, fuzzy
#~ msgid "error installing new statoverride"
#~ msgstr "在安裝新的 statoverride 時發生錯誤：%s"

#~ msgid "--build takes at most two arguments"
#~ msgstr "--build 至多可有兩個參數"

#~ msgid "Copyright (C) 1994-1996 Ian Jackson.\n"
#~ msgstr "Copyright (C) 1994-1996 Ian Jackson.\n"

#, fuzzy
#~| msgid ""
#~| "\n"
#~| "Copyright (C) 1995 Ian Jackson.\n"
#~| "Copyright (C) 2000,2001 Wichert Akkerman."
#~ msgid ""
#~ "Copyright (C) 1995 Ian Jackson.\n"
#~ "Copyright (C) 2000-2002 Wichert Akkerman.\n"
#~ "Copyright (C) 2009-2010 Raphael Hertzog.\n"
#~ msgstr ""
#~ "\n"
#~ "Copyright (C) 1995 Ian Jackson.\n"
#~ "Copyright (C) 2000,2001 Wichert Akkerman."

#, fuzzy
#~ msgid "it is a slave of %s"
#~ msgstr " 次要 %s：%s"

#, fuzzy
#~| msgid "cannot stat old name `%s': %s"
#~ msgid "cannot stat %s: %s"
#~ msgstr "無法取得原本名稱 `%s' 的資訊：%s"

#, fuzzy
#~| msgid "%s: copying %s to %s failed, giving up: %s"
#~ msgid "scan of %s failed: %s"
#~ msgstr "%s：在將 %s 複製至 %s 時發生錯誤，取消操作：%s"

#, fuzzy
#~| msgid "failed to exec %s"
#~ msgid "failed to execute %s: %s"
#~ msgstr "無法執行 %s"

#~ msgid "unable to make %s a symlink to %s: %s"
#~ msgstr "無法讓 %s 成為指向 %s 的符號連結：%s"

#~ msgid "unable to install %s as %s: %s"
#~ msgstr "無法將 %s 安裝為 %s：%s"

#, fuzzy
#~ msgid "while writing %s: %s"
#~ msgstr "在寫入 stdout 時發生錯誤：%s"

#~ msgid "unable to read %s: %s"
#~ msgstr "無法讀取 %s：%s"

#~ msgid "unable to close %s: %s"
#~ msgstr "無法關閉 %s：%s"

#, fuzzy
#~| msgid "unable to write %s: %s"
#~ msgid "cannot write %s: %s"
#~ msgstr "無法寫入 %s：%s"

#, fuzzy
#~| msgid "unable to rename %s to %s: %s"
#~ msgid "unable to rename file '%s' to '%s'"
#~ msgstr "無法將 %s 更名為 %s：%s"

#~ msgid "malloc failed (%ld bytes)"
#~ msgstr "malloc 失敗（%ld 位元組）"

#~ msgid "realloc failed (%ld bytes)"
#~ msgstr "realloc 失敗（%ld 位元組）"

#~ msgid "unable to unbuffer `%.255s'"
#~ msgstr "無法關閉緩衝 `%.255s'"

#~ msgid "part file `%.250s' has trailing garbage"
#~ msgstr "分割檔 `%.250s' 的結尾有無效的資料"

#~ msgid "size %7d occurs %5d times\n"
#~ msgstr "大小為 %7d 出現了 %5d 次\n"

#~ msgid "out of memory pushing error handler: "
#~ msgstr "在進行錯誤處理時記憶體不足："

#~ msgid "unable to unlock dpkg status database"
#~ msgstr "無法解除鎖定 dpkg 的狀態資料庫"

#~ msgid "copy info file `%.255s'"
#~ msgstr "複製 info 檔 `%.255s'"

#~ msgid "failed to write parsing warning"
#~ msgstr "無法寫入語法分析警告文字"

#~ msgid "unable to lock triggers area"
#~ msgstr "無法鎖定觸發程式區"

#~ msgid "failed to run %s (%.250s)"
#~ msgstr "無法執行 %s (%.250s)"

#~ msgid "failed to exec shell (%.250s)"
#~ msgstr "無法執行 shell (%.250s)"

#~ msgid "unable to check for existence of `%.250s'"
#~ msgstr "無法判斷 `%.250s' 是否存在"

#~ msgid "failed to exec rm for cleanup"
#~ msgstr "無法執行 rm 以進行清理"

#~ msgid ""
#~ "%s debugging option, --debug=<octal> or -D<octal>:\n"
#~ "\n"
#~ " number  ref. in source   description\n"
#~ "      1   general           Generally helpful progress information\n"
#~ "      2   scripts           Invocation and status of maintainer scripts\n"
#~ "     10   eachfile          Output for each file processed\n"
#~ "    100   eachfiledetail    Lots of output for each file processed\n"
#~ "     20   conff             Output for each configuration file\n"
#~ "    200   conffdetail       Lots of output for each configuration file\n"
#~ "     40   depcon            Dependencies and conflicts\n"
#~ "    400   depcondetail      Lots of dependencies/conflicts output\n"
#~ "  10000   triggers          Trigger activation and processing\n"
#~ "  20000   triggersdetail    Lots of output regarding triggers\n"
#~ "  40000   triggersstupid    Silly amounts of output regarding triggers\n"
#~ "   1000   veryverbose       Lots of drivel about eg the dpkg/info "
#~ "directory\n"
#~ "   2000   stupidlyverbose   Insane amounts of drivel\n"
#~ "\n"
#~ "Debugging options are be mixed using bitwise-or.\n"
#~ "Note that the meanings and values are subject to change.\n"
#~ msgstr ""
#~ "%s 除錯選項，--debug=<八進制數字> 或 -D<八進制數字>：\n"
#~ "\n"
#~ "    數字  原始碼參照文字    說明\n"
#~ "      1   general           一般的輔助進度資訊\n"
#~ "      2   scripts           維護者 Script 的對應資訊及狀態\n"
#~ "     10   eachfile          每當在操作檔案時輸出\n"
#~ "    100   eachfiledetail    每當在操作檔案時輸出詳盡資訊\n"
#~ "     20   conff             每當在處理設定檔時輸出\n"
#~ "    200   conffdetail       每當在處理設定檔時輸出詳盡資訊\n"
#~ "     40   depcon            相依及衝突關係\n"
#~ "    400   depcondetail      相依及衝突關係的詳盡資訊\n"
#~ "  10000   triggers          觸發程式的呼叫及處理\n"
#~ "  20000   triggersdetail    觸發程式的相關詳盡資訊\n"
#~ "  40000   triggersstupid    觸發程式的相關超詳盡資訊\n"
#~ "   1000   veryverbose       大量的瑣碎細節，如 dpkg/info 目錄\n"
#~ "   2000   stupidlyverbose   數量極大的超詳盡資訊\n"
#~ "\n"
#~ "可用 or 位元運算來組合除錯選項。\n"
#~ "請注意，以上的說明及數值可能會有變動。\n"

#, fuzzy
#~| msgid ""
#~| "%s forcing options - control behaviour when problems found:\n"
#~| "  warn but continue:  --force-<thing>,<thing>,...\n"
#~| "  stop with error:    --refuse-<thing>,<thing>,... | --no-force-"
#~| "<thing>,...\n"
#~| " Forcing things:\n"
#~| "  all [!]                Set all force options\n"
#~| "  downgrade [*]          Replace a package with a lower version\n"
#~| "  configure-any          Configure any package which may help this one\n"
#~| "  hold                   Process incidental packages even when on hold\n"
#~| "  bad-path               PATH is missing important programs, problems "
#~| "likely\n"
#~| "  not-root               Try to (de)install things even when not root\n"
#~| "  overwrite              Overwrite a file from one package with another\n"
#~| "  overwrite-diverted     Overwrite a diverted file with an undiverted "
#~| "version\n"
#~| "  bad-verify             Install a package even if it fails authenticity "
#~| "check\n"
#~| "  depends-version [!]    Turn dependency version problems into warnings\n"
#~| "  depends [!]            Turn all dependency problems into warnings\n"
#~| "  confnew [!]            Always use the new config files, don't prompt\n"
#~| "  confold [!]            Always use the old config files, don't prompt\n"
#~| "  confdef [!]            Use the default option for new config files if "
#~| "one\n"
#~| "                         is available, don't prompt. If no default can "
#~| "be found,\n"
#~| "                         you will be prompted unless one of the confold "
#~| "or\n"
#~| "                         confnew options is also given\n"
#~| "  confmiss [!]           Always install missing config files\n"
#~| "  breaks [!]             Install even if it would break another package\n"
#~| "  conflicts [!]          Allow installation of conflicting packages\n"
#~| "  architecture [!]       Process even packages with wrong architecture\n"
#~| "  overwrite-dir [!]      Overwrite one package's directory with "
#~| "another's file\n"
#~| "  remove-reinstreq [!]   Remove packages which require installation\n"
#~| "  remove-essential [!]   Remove an essential package\n"
#~| "\n"
#~| "WARNING - use of options marked [!] can seriously damage your "
#~| "installation.\n"
#~| "Forcing options marked [*] are enabled by default.\n"
#~ msgid ""
#~ "%s forcing options - control behaviour when problems found:\n"
#~ "  warn but continue:  --force-<thing>,<thing>,...\n"
#~ "  stop with error:    --refuse-<thing>,<thing>,... | --no-force-"
#~ "<thing>,...\n"
#~ " Forcing things:\n"
#~ "  all [!]                Set all force options\n"
#~ "  downgrade [*]          Replace a package with a lower version\n"
#~ "  configure-any          Configure any package which may help this one\n"
#~ "  hold                   Process incidental packages even when on hold\n"
#~ "  bad-path               PATH is missing important programs, problems "
#~ "likely\n"
#~ "  not-root               Try to (de)install things even when not root\n"
#~ "  overwrite              Overwrite a file from one package with another\n"
#~ "  overwrite-diverted     Overwrite a diverted file with an undiverted "
#~ "version\n"
#~ "  bad-verify             Install a package even if it fails authenticity "
#~ "check\n"
#~ "  depends-version [!]    Turn dependency version problems into warnings\n"
#~ "  depends [!]            Turn all dependency problems into warnings\n"
#~ "  confnew [!]            Always use the new config files, don't prompt\n"
#~ "  confold [!]            Always use the old config files, don't prompt\n"
#~ "  confdef [!]            Use the default option for new config files if "
#~ "one\n"
#~ "                         is available, don't prompt. If no default can be "
#~ "found,\n"
#~ "                         you will be prompted unless one of the confold "
#~ "or\n"
#~ "                         confnew options is also given\n"
#~ "  confmiss [!]           Always install missing config files\n"
#~ "  confask [!]            Offer to replace config files with no new "
#~ "versions\n"
#~ "  breaks [!]             Install even if it would break another package\n"
#~ "  conflicts [!]          Allow installation of conflicting packages\n"
#~ "  architecture [!]       Process even packages with wrong architecture\n"
#~ "  overwrite-dir [!]      Overwrite one package's directory with another's "
#~ "file\n"
#~ "  unsafe-io [!]          Do not perform safe I/O operations when "
#~ "unpacking\n"
#~ "  remove-reinstreq [!]   Remove packages which require installation\n"
#~ "  remove-essential [!]   Remove an essential package\n"
#~ "\n"
#~ "WARNING - use of options marked [!] can seriously damage your "
#~ "installation.\n"
#~ "Forcing options marked [*] are enabled by default.\n"
#~ msgstr ""
#~ "%s 強制選項 - 可指定遇到問題時的處理方法：\n"
#~ "  警告，但繼續執行： --force-<手段>,<手段>,...\n"
#~ "  有錯誤時立即中止： --refuse-<手段>,<手段>,... | --no-force-<手段>,...\n"
#~ " 強制執行的各種方法：\n"
#~ "  all [!]                啟用所有的強制選項\n"
#~ "  downgrade [*]          把套件替換成較低的版本\n"
#~ "  configure-any          設定任何可能能幫助解決問題的套件\n"
#~ "  hold                   同時處理相關套件，即使已被保留(hold)\n"
#~ "  bad-path               PATH 環境變數中找不到關鍵程式，有可能引起錯誤\n"
#~ "  not-root               即使不是 root，也試圖安裝（移除）軟體\n"
#~ "  overwrite              以某套件的檔案覆蓋另一套件的檔案\n"
#~ "  overwrite-diverted     使用一個非抽換版的檔案覆蓋原有的抽換版\n"
#~ "  bad-verify             安裝即使沒能通過驗証的套件\n"
#~ "  depends-version [!]    將版本相依問題作為警告處理\n"
#~ "  depends [!]            把所有類型的相依問題都作為警告處理\n"
#~ "  confnew [!]            直接使用新版的設定檔，不會提示\n"
#~ "  confold [!]            直接使用原有的設定檔，不會提示\n"
#~ "  confdef [!]            如果有提供預設值，就直接套用於新的設定檔\n"
#~ "                         如果沒有，又沒有使用 confnew 或 confold 選項，\n"
#~ "                         則將會提示，交由使用者決定\n"
#~ "  confmiss [!]           強制安裝欠缺的設定檔\n"
#~ "  conflicts [!]          即使可能會毀損其它套件也要進行安裝\n"
#~ "  architecture [!]       即使硬體平台不符也要進行安裝\n"
#~ "  overwrite-dir [!]      以某套件的檔案覆蓋另一套件的目錄\n"
#~ "  remove-reinstreq [!]   移除那些必需隨之安裝的套件\n"
#~ "  remove-essential [!]   移除某個基本套件\n"
#~ "\n"
#~ "警告 - 使用標示了 [!] 的選項可能會嚴重破壞您的安裝作業。\n"
#~ "預設會啟用標示了 [*] 的強制選項。\n"

#~ msgid "failed to exec dpkg-split to see if it's part of a multiparter"
#~ msgstr "無法執行 dpkg-split 以判斷它是否為套件檔中的一個分割檔"

#~ msgid "failed to execl debsig-verify"
#~ msgstr "無法 execl debsig-verify"

#~ msgid "failed to exec dpkg-deb to extract control information"
#~ msgstr "無法執行 dpkg-deb 以擷取 control 資訊"

#~ msgid "unable to exec dpkg-deb to get filesystem archive"
#~ msgstr "無法執行 dpkg-deb 以取得檔案系統上的套件檔"

#~ msgid "unable to delete disappearing control info file `%.250s'"
#~ msgstr "無法刪除已經消失了的 control 資訊檔 `%.250s'"

#~ msgid "dpkg: %s not found.\n"
#~ msgstr "dpkg：沒有找到 %s。\n"

#~ msgid "failed to chdir to .../DEBIAN"
#~ msgstr "無法 chdir 到 .../DEBIAN"

#~ msgid "failed to exec tar -cf"
#~ msgstr "無法執行 tar -cf"

#~ msgid "failed to make tmpfile (control)"
#~ msgstr "無法建立臨時檔 (control)"

#~ msgid "failed to unlink tmpfile (control), %s"
#~ msgstr "無法刪除臨時檔 (control)，%s"

#~ msgid "control"
#~ msgstr "control"

#~ msgid "failed to rewind tmpfile (control)"
#~ msgstr "無法跳到臨時檔的起始位置 (control)"

#~ msgid "failed to fstat tmpfile (control)"
#~ msgstr "無法 fstat 臨時檔 (control)"

#~ msgid "failed to exec find"
#~ msgstr "無法執行 find"

#~ msgid "failed to exec sh -c mv foo/* &c"
#~ msgstr "無法執行 sh -c mv foo/* &c"

#~ msgid "file `%.250s' is corrupt - %.250s length contains nulls"
#~ msgstr "檔案 `%.250s' 已損毀 - %.250s 的長度含有 null"

#~ msgid "file `%.250s' is corrupt - negative member length %zi"
#~ msgstr "檔案 `%.250s' 已損毀 - 負的成員長度 %zi"

#~ msgid "failed getting the current file position"
#~ msgstr "無法取得目前的檔案位置"

#~ msgid "failed setting the current file position"
#~ msgstr "無法設定目前的檔案位置"

#~ msgid "version number"
#~ msgstr "版本編號"

#~ msgid "header info member"
#~ msgstr "檔案標頭資訊成員"

#, fuzzy
#~| msgid "skipped member data from %s"
#~ msgid "skipped control area from %s"
#~ msgstr "忽略了 %s 中的成員資料"

#, fuzzy
#~ msgid "failed to create temporary directory"
#~ msgstr "無法為臨時目錄命名"

#~ msgid "info_spew"
#~ msgstr "info_spew"

#, fuzzy
#~| msgid "failed to exec dpkg-deb to extract control information"
#~ msgid "failed to exec dpkg-deb to extract field value"
#~ msgstr "無法執行 dpkg-deb 以擷取 control 資訊"

#, fuzzy
#~| msgid "unable to create %s: %s"
#~ msgid "unable to stat %s: %s"
#~ msgstr "無法建立 %s：%s"

#~ msgid "slave name %s duplicated"
#~ msgstr "次要名稱 %s 已重複"

#~ msgid "slave link %s duplicated"
#~ msgstr "次要連結 %s 已重複"

#~ msgid "%d requested control components are missing"
#~ msgstr "找不到 %d 個必要的控制元件"

#~ msgid "cat (data)"
#~ msgstr "cat (data)"

#~ msgid "failed to open pipe descriptor `1' in paste"
#~ msgstr "在貼上時無法開啟管線重導 `1'"

#~ msgid "failed to write to gzip -dc"
#~ msgstr "無法寫入 gzip -dc"

#~ msgid "failed to close gzip -dc"
#~ msgstr "無法關閉 gzip -dc"

#~ msgid "failed to syscall lseek to files archive portion"
#~ msgstr "無法使用系統呼叫 lseek 來匯整套件檔位置"

#~ msgid "unable to exec mksplit"
#~ msgstr "無法執行 mksplit"

#~ msgid ""
#~ "\n"
#~ "Copyright (C) 1995 Ian Jackson.\n"
#~ "Copyright (C) 2000,2001 Wichert Akkerman."
#~ msgstr ""
#~ "\n"
#~ "Copyright (C) 1995 Ian Jackson.\n"
#~ "Copyright (C) 2000,2001 Wichert Akkerman."

#~ msgid "two commands specified: %s and --%s"
#~ msgstr "指定了兩個指令：%s 以及 --%s"

#~ msgid "--%s needs a divert-to argument"
#~ msgstr "--%s 需有 <抽換名稱> 參數"

#~ msgid "--%s needs a <package> argument"
#~ msgstr "--%s 需有 <套件> 參數"

#~ msgid "cannot open diversions: %s"
#~ msgstr "無法開啟抽換項目：%s"

#~ msgid "rename: rename `%s' to `%s': %s"
#~ msgstr "更名：將 `%s' 更名為 `%s'：%s"

#~ msgid "create diversions-new: %s"
#~ msgstr "建立 diversions-new：%s"

#~ msgid "write diversions-new: %s"
#~ msgstr "寫入 diversions-new：%s"

#~ msgid "close diversions-new: %s"
#~ msgstr "關閉 diversions-new：%s"

#~ msgid "create new diversions-old: %s"
#~ msgstr "建立新的 diversions-old：%s"

#~ msgid "install new diversions: %s"
#~ msgstr "安裝新的抽換項目：%s"

#~ msgid "internal error: %s corrupt: %s"
#~ msgstr "內部錯誤：%s 損毀：%s"

#~ msgid "dpkg-deb - error: %s (`%s') doesn't contain any digits\n"
#~ msgstr "dpkg-deb - 錯誤：%s (`%s') 未含有任何數字\n"

#, fuzzy
#~ msgid "Debian revision"
#~ msgstr "Debian %s 版本 %s。\n"

#~ msgid "%d errors in control file"
#~ msgstr "在 control 檔裡共有 %d 個錯誤"

#, fuzzy
#~| msgid "unable to read %s: %s"
#~ msgid "can't readdir %s: %s"
#~ msgstr "無法讀取 %s：%s"

#~ msgid "failed in buffer_write(fd) (%i, ret=%li): %s"
#~ msgstr "buffer_write(fd) (%i, ret=%li) 失敗：%s"

#~ msgid "eof in buffer_write(stream): %s"
#~ msgstr "在 buffer_write(stream) 中發現 eof：%s"

#~ msgid "error in buffer_write(stream): %s"
#~ msgstr "在 buffer_write(stream) 中發生錯誤：%s"

#~ msgid "failed in buffer_read(fd): %s"
#~ msgstr "buffer_read(fd) 失敗：%s"

#~ msgid "error in buffer_read(stream): %s"
#~ msgstr "在 buffer_read(stream) 中發生錯誤：%s"

#, fuzzy
#~ msgid "%s returned error exit status %d"
#~ msgstr "子程序 %s 傳回了錯誤退出狀態 %d"

#, fuzzy
#~ msgid "%s killed by signal (%s)%s"
#~ msgstr "子程序 %s 被信號 (%s)%s 終止了"

#, fuzzy
#~ msgid ""
#~ "This is free software; see the GNU General Public Licence version 2 or\n"
#~ "later for copying conditions. There is NO warranty.\n"
#~ msgstr ""
#~ "\n"
#~ "這是自由軟體﹔要獲知複製該軟體的前提和條件，請參閱 GNU Public Licence\n"
#~ "第 2 或更新的版本。本軟體【不】提供任何保証。\n"

#~ msgid ""
#~ "\n"
#~ "This is free software; see the GNU General Public Licence version 2 or\n"
#~ "later for copying conditions. There is NO warranty.\n"
#~ msgstr ""
#~ "\n"
#~ "這是自由軟體﹔要獲知複製該軟體的前提和條件，請參閱 GNU Public Licence\n"
#~ "第 2 或更新的版本。本軟體【不】提供任何保証。\n"

#~ msgid "%s: failed to exec '%s %s'"
#~ msgstr "%s：無法執行 '%s %s'"

#~ msgid "%s: internal gzip error: read: `%s'"
#~ msgstr "%s：內部 gzip 錯誤：讀取：`%s'"

#~ msgid "%s: internal gzip error: write: `%s'"
#~ msgstr "%s：內部 gzip 錯誤：寫入：`%s'"

#~ msgid "%s: internal gzip error: read(%i) != write(%i)"
#~ msgstr "%s：內部 gzip 錯誤：讀取(%i) != 寫入(%i)"

#~ msgid "%s: internal bzip2 error: read: `%s'"
#~ msgstr "%s：內部 bzip2 錯誤：讀取：`%s'"

#~ msgid "%s: internal bzip2 error: write: `%s'"
#~ msgstr "%s：內部 bzip2 錯誤：寫入：`%s'"

#~ msgid "%s: internal bzip2 error: read(%i) != write(%i)"
#~ msgstr "%s：內部 bzip2 錯誤：讀取(%i) != 寫入(%i)"

#~ msgid "Don't forget to foreground (`fg') this process when you're done !\n"
#~ msgstr "在完成後，請不要忘了用 `fg' 指令切換回這個程序！\n"

#~ msgid ""
#~ "This is free software; see the GNU General Public License version 2 or\n"
#~ "later for copying conditions. There is NO warranty.\n"
#~ "See %s --license for copyright and license details.\n"
#~ msgstr ""
#~ "這是自由軟體﹔要獲知複製該軟體的前提和條件，請參閱 GNU Public Licence\n"
#~ "第 2 或更新的版本。本軟體【不】提供任何保証。\n"
#~ "請執行 %s --license 以取得版權和授權的詳盡資訊。\n"

#~ msgid "unable to get unique filename for control info"
#~ msgstr "無法由 control 資訊中取得唯一的檔案名稱"

#~ msgid "Debian `%s' package management program query tool\n"
#~ msgstr "Debian `%s' 套件管理程式查詢工具\n"

#, fuzzy
#~ msgid ""
#~ "Use --help for help about querying packages;\n"
#~ "Use --license for copyright license and lack of warranty (GNU GPL)."
#~ msgstr ""
#~ "使用 --help 以取得如何查詢套件等等的說明﹔\n"
#~ "使用 --licence 以取得有關版權授權和無擔保的說明 (GNU GPL)。\n"
#~ "\n"

#~ msgid "failed to chown %s: %s"
#~ msgstr "無法 chown %s：%s"

#~ msgid "failed to chmod %s: %s"
#~ msgstr "無法 chmod %s：%s"

#~ msgid "failed to fork for cleanup"
#~ msgstr "無法進行 fork 以進行清理"

#~ msgid "failed to wait for rm cleanup"
#~ msgstr "在等待 rm cleanup 時失敗"

#~ msgid "rm cleanup failed, code %d\n"
#~ msgstr "在 rm cleanup 時失敗，代碼為 %d\n"

#~ msgid "failed to exec rm -rf"
#~ msgstr "無法執行 rm -rf"

#~ msgid "failed to read `control' (in `%.255s')"
#~ msgstr "無法讀取 `control'（位於 `%.255s'）"

#~ msgid "unable to seek back"
#~ msgstr "無法向後 seek"

#~ msgid "unknown data type `%i' in buffer_write\n"
#~ msgstr "在 buffer_write 中有不明的資料型態 `%i'\n"

#~ msgid "unknown data type `%i' in buffer_read\n"
#~ msgstr "在 buffer_read 中有不明的資料型態 `%i' \n"

#~ msgid "wait for shell failed"
#~ msgstr "在等待 shell 時失敗"

#~ msgid "read error in diversions [i]"
#~ msgstr "抽換資訊讀取錯誤 [i]"

#~ msgid "unlink"
#~ msgstr "移除連結"

#~ msgid "chmod"
#~ msgstr "改變權限"

#~ msgid "delete"
#~ msgstr "刪除"

#, fuzzy
#~ msgid "failed to %s '%.255s'"
#~ msgstr "無法%s `%%.255s'"

#~ msgid "wait for dpkg-split failed"
#~ msgstr "在等待 dpkg-split 時失敗"

#~ msgid ""
#~ "\n"
#~ "Copyright (C) 2000 Wichert Akkerman."
#~ msgstr ""
#~ "\n"
#~ "Copyright (C) 2000 Wichert Akkerman."

#~ msgid "no mode specified"
#~ msgstr "未指定模式"

#~ msgid "illegal user %s"
#~ msgstr "不合法的使用者 %s"

#~ msgid "non-existing user %s"
#~ msgstr "不存在的使用者 %s"

#~ msgid "illegal group %s"
#~ msgstr "不合法的群組 %s"

#~ msgid "non-existing group %s"
#~ msgstr "不存在的群組 %s"

#~ msgid "illegal mode %s"
#~ msgstr "不合法的模式%s"

#~ msgid "aborting"
#~ msgstr "中止操作"

#~ msgid "cannot open statoverride: %s"
#~ msgstr "無法開啟 statoverride：%s"

#~ msgid "Multiple overrides for \"%s\", aborting"
#~ msgstr "\"%s\" 有多個強制選項，中止操作"

#~ msgid "failed write during hashreport"
#~ msgstr "在 hashreport 時寫入失敗"

#~ msgid "configuration error: unknown option %s"
#~ msgstr "設定錯誤：未知選項 %s"

#~ msgid "configuration error: %s does not take a value"
#~ msgstr "設定錯誤：不需賦予值給 %s"

#, fuzzy
#~ msgid "unexecpted end of line in statoverride file"
#~ msgstr "在第 %d 行的套件名稱中意外地發現此行結束"

#, fuzzy
#~ msgid "--check-supported takes no arguments"
#~ msgstr "dpkg-trigger --check-supported 不需任何參數"

#~ msgid "--forget-old-unavail takes no arguments"
#~ msgstr "--forget-old-unavail 不需任何參數"

#~ msgid ""
#~ "\n"
#~ "Copyright (C) 1994,1995 Ian Jackson."
#~ msgstr ""
#~ "\n"
#~ "Copyright (C) 1994,1995 Ian Jackson."

#~ msgid ""
#~ "Usage: %s [<options> ...] [--] <filename>\n"
#~ "\n"
#~ "Options:\n"
#~ "  --section <regexp> <title>\n"
#~ "                           put the new entry in the <regex> matched "
#~ "section\n"
#~ "                           or create a new one with <title> if non-"
#~ "existent.\n"
#~ "  --menuentry=<text>       set the menu entry.\n"
#~ "  --description=<text>     set the description to be used in the menu "
#~ "entry.\n"
#~ "  --info-file=<path>       specify info file to install in the "
#~ "directory.\n"
#~ "  --dir-file=<path>        specify file name of info directory file.\n"
#~ "  --infodir=<directory>    same as '--dir-file=<directory>/dir'.\n"
#~ "  --info-dir=<directory>   likewise.\n"
#~ "  --keep-old               do not replace entries nor remove empty ones.\n"
#~ "  --remove                 remove the entry specified by <filename> "
#~ "basename.\n"
#~ "  --remove-exactly         remove the exact <filename> entry.\n"
#~ "  --test                   enables test mode (no actions taken).\n"
#~ "  --debug                  enables debug mode (show more information).\n"
#~ "  --quiet                  do not show output messages.\n"
#~ "  --help                   show this help message.\n"
#~ "  --version                show the version.\n"
#~ msgstr ""
#~ "用法：%s [<選項> ...] [--] <檔名>\n"
#~ "\n"
#~ "選項：\n"
#~ "  --section <表示式> <標題>\n"
#~ "                           將新的項目放到符合 <表示式> 的區段中，\n"
#~ "                           若未找到，則以 <標題> 建立一個新區段。\n"
#~ "  --menuentry=<文字>       設定選單項目。\n"
#~ "  --description=<文字>     設定選單項目的說明文字。\n"
#~ "  --info-file=<路徑>       設定要安裝到該目錄裡的 info 檔。\n"
#~ "  --dir-file=<路徑>        指定 info 目錄裡的檔案的檔案名稱。\n"
#~ "  --infodir=<目錄>         等同於 '--dir-file=<目錄>/dir'。\n"
#~ "  --info-dir=<目錄>        比照辨理。\n"
#~ "  --keep-old               不替換已有項目，也不移除空白項目。\n"
#~ "  --remove                 移除以 <檔名> 為基準名稱的項目。\n"
#~ "  --remove-exactly         移除符合 <檔名> 項目。\n"
#~ "  --test                   啟用測試模式（不實際進行）。\n"
#~ "  --debug                  啟用除錯模式（顯示更多訊息）。\n"
#~ "  --quiet                  安靜模式，儘量不顯示訊息。\n"
#~ "  --help                   顯示這個說明訊息。\n"
#~ "  --version                顯示版本資訊。\n"

#~ msgid "could not open stderr for output! %s"
#~ msgstr "無法開啟 stderr 以輸出資訊！%s"

#~ msgid "%s: --section needs two more args"
#~ msgstr "%s：--section 需要兩個以上的參數"

#~ msgid "%s: option --%s is deprecated (ignored)"
#~ msgstr "%s：選項 --%s 已棄用（已忽略）"

#~ msgid "%s: unknown option `%s'"
#~ msgstr "%s：未知選項 `%s'"

#~ msgid "%s: too many arguments"
#~ msgstr "%s：參數過多"

#~ msgid "%s: --section ignored with --remove"
#~ msgstr "%s：在 --remove 時，會無視 --section"

#~ msgid "%s: --description ignored with --remove"
#~ msgstr "%s：在 --remove 時，會無視 --description"

#~ msgid "%s: test mode - dir file will not be updated"
#~ msgstr "%s：測試模式 - 將不會更新目錄檔"

#~ msgid "%s: warning, ignoring confusing INFO-DIR-ENTRY in file."
#~ msgstr "%s：警告，忽略檔案內難以解析的 INFO-DIR-ENTRY 項目。"

#~ msgid "invalid info entry"
#~ msgstr "錯誤的 info 項目"

#~ msgid ""
#~ "\n"
#~ "No `START-INFO-DIR-ENTRY' and no `This file documents'.\n"
#~ "%s: unable to determine description for `dir' entry - giving up\n"
#~ msgstr ""
#~ "\n"
#~ "缺少 `START-INFO-DIR-ENTRY' 和 `This file documents'。\n"
#~ "%s：無法辯識 `dir' 項目的說明 - 取消操作\n"

#~ msgid "%s: no file %s, retrieving backup file %s."
#~ msgstr "%s：沒有檔案 %s，取回備份檔 %s。"

#~ msgid "%s: no backup file %s available, retrieving default file."
#~ msgstr "%s：找不到備份檔 %s，取回預設檔。"

#~ msgid "%s: no backup file %s available."
#~ msgstr "%s：找不到備份檔 %s。"

#~ msgid "%s: no default file %s available, giving up."
#~ msgstr "%s：找不到預設檔 %s，取消操作。"

#~ msgid "%s: failed to lock dir for editing! %s"
#~ msgstr "%s：無法鎖定目錄以進行編輯！%s"

#~ msgid "try deleting %s?"
#~ msgstr "是否試著刪除 %s？"

#~ msgid "unable to open %s: %s"
#~ msgstr "無法開啟 %s：%s"

#~ msgid "unable to close %s after read: %s"
#~ msgstr "在讀取完畢後無法關閉 %s：%s"

#~ msgid "%s: existing entry for `%s' not replaced"
#~ msgstr "%s：不取代已存在的項目 `%s'"

#~ msgid "%s: replacing existing dir entry for `%s'"
#~ msgstr "%s：取代已存在的項目 `%s'"

#~ msgid "%s: creating new section `%s'"
#~ msgstr "%s：建立新的區段 `%s'"

#~ msgid "%s: no sections yet, creating Miscellaneous section too."
#~ msgstr "%s：尚無任何區段，同時建立 Miscellaneous。"

#~ msgid "%s: no section specified for new entry, placing at end"
#~ msgstr "%s：沒有替新的項目指定區段，把它放到最後面"

#~ msgid "%s: deleting entry `%s ...'"
#~ msgstr "%s：刪除項目 `%s...'"

#~ msgid "%s: empty section `%s' not removed"
#~ msgstr "%s：未刪除空的區段 `%s'"

#~ msgid "%s: deleting empty section `%s'"
#~ msgstr "%s：刪除空的區段 `%s'"

#~ msgid "%s: no entry for file `%s' and menu entry `%s'"
#~ msgstr "%s：沒有 `%s' 檔和選單 `%s' 的項目"

#~ msgid "%s: no entry for file `%s'"
#~ msgstr "%s：沒有檔案 `%s' 的項目"

#~ msgid "unable to backup old %s, giving up: %s"
#~ msgstr "無法備份原有的 %s，取消操作：%s"

#~ msgid "unable to install new %s: %s"
#~ msgstr "無法安裝新的 %s：%s"

#~ msgid "%s: could not backup %s in %s: %s"
#~ msgstr "%s：無法將 %s 備份於 %s：%s"

#~ msgid "%s: warning - unable to unlock %s: %s"
#~ msgstr "%s：警告 - 無法解除鎖定 %s：%s"

#~ msgid "unable to read %s: %d"
#~ msgstr "無法讀取 %s：%d"

#~ msgid "dbg: %s"
#~ msgstr "dbg: %s"

#~ msgid "failed to open tmpfile (control), %s"
#~ msgstr "無法開啟臨時檔 (control)，%s"

#~ msgid "failed to open tmpfile (data), %s"
#~ msgstr "無法建立臨時檔 (data)，%s"

#~ msgid "invalid number for --command-fd"
#~ msgstr "--command-fd 所指定的數字無效"

#~ msgid "unable to rewind at start of vsnprintf"
#~ msgstr "無法在 vsnprintf 開始時跳到起始位置"

#~ msgid "unable to truncate in vsnprintf"
#~ msgstr "無法在 vsnprintf 裡進行縮減"

#~ msgid "write error in vsnprintf"
#~ msgstr "在 vsnprintf 裡寫入錯誤"

#~ msgid "unable to stat in vsnprintf"
#~ msgstr "無法在 vsnprintf 裡進行狀態取得"

#~ msgid "unable to rewind in vsnprintf"
#~ msgstr "無法在 vsnprintf 裡跳到起始位置"

#~ msgid "read error in vsnprintf truncated"
#~ msgstr "在 vsnprintf 進行縮減時讀取錯誤"

#~ msgid "System error no.%d"
#~ msgstr "系統錯誤 no.%d"

#~ msgid "Signal no.%d"
#~ msgstr "信號 no.%d"

#~ msgid "dpkg: warning - %s returned error exit status %d\n"
#~ msgstr "dpkg：警告 - %s 傳回了錯誤退出狀態 %d\n"

#~ msgid "dpkg: warning - %s killed by signal (%s)%s\n"
#~ msgstr "dpkg：警告 - %s 被信號 (%s)%s 終止了\n"

#~ msgid "failed to read `%s' at line %d"
#~ msgstr "無法讀取 `%s' 的第 `%d' 行"

#~ msgid "parse error, in file `%.255s' near line %d"
#~ msgstr "語法錯誤，在檔案 `%.255s' 的第 %d 行附近"

#~ msgid " package `%.255s'"
#~ msgstr " 套件 `%.255s'"

#~ msgid "failed to realloc for variable buffer"
#~ msgstr "無法在變數緩衝區上進行 realloc"

#~ msgid "process_archive ...  already disappeared !"
#~ msgstr "process_archive ... 已經消失了！"

#~ msgid "gobble replaced file `%.255s'"
#~ msgstr "大量替換了檔案 `%.255s'"

#~ msgid "dpkg: %s: warning - failed to remove `%.250s': %s\n"
#~ msgstr "dpkg：%s：警告 - 無法移除 `%.250s'：%s\n"

#~ msgid "--audit does not take any arguments"
#~ msgstr "--audit 不需任何參數"

#~ msgid "--yet-to-unpack does not take any arguments"
#~ msgstr "--yet-to-unpack 不需任何參數"

#~ msgid "--assert-* does not take any arguments"
#~ msgstr "--assert-* 不需任何參數"

#~ msgid "--predep-package does not take any argument"
#~ msgstr "--predep-package 不需任何參數"

#~ msgid "--print-architecture does not take any argument"
#~ msgstr "--print-architecture 不需任何參數"

#~ msgid "unable to stat installed %s script `%.250s'"
#~ msgstr "無法取得已安裝的 %s script `%.250s' 的狀態"

#~ msgid "unable to stat new %s script `%.250s'"
#~ msgstr "無法取得新的 %s script `%.250s' 的狀態"

#~ msgid "unable to execute new %s"
#~ msgstr "無法執行新的 %s"

#~ msgid "dpkg: warning - unable to stat %s `%.250s': %s\n"
#~ msgstr "dpkg：警告 - 無法取得 %s `%.250s' 的狀態：%s\n"

#~ msgid "--set-selections does not take any argument"
#~ msgstr "--set-selections 不需任何參數"

#~ msgid "--clear-selections does not take any argument"
#~ msgstr "--clear-selections 不需任何參數"

#~ msgid "--build needs a directory argument"
#~ msgstr "--build 需要一個目錄作為參數"

#~ msgid ""
#~ "dpkg-deb: warning, not checking contents of control area.\n"
#~ "dpkg-deb: building an unknown package in `%s'.\n"
#~ msgstr ""
#~ "dpkg-deb：警告，沒有檢查 control 區域的內容。\n"
#~ "dpkg-deb：正於 `%s' 編譯一個未知的套件。\n"

#~ msgid "Internal error, compress_type `%i' unknown!"
#~ msgstr "內部錯誤，未知的 compress_type `%i'！"

#~ msgid "--join requires one or more part file arguments"
#~ msgstr "--join 需要一個或多個分割檔的檔案名稱作為參數"

#~ msgid "--listq does not take any arguments"
#~ msgstr "--listq 不需任何參數"

#~ msgid ""
#~ "\n"
#~ "Copyright (C) 1996 Kim-Minh Kaplan."
#~ msgstr ""
#~ "\n"
#~ "Copyright (C) 1996 Kim-Minh Kaplan."

#~ msgid ""
#~ "Usage: %s [<option> ...] [--] [<dirname>]\n"
#~ "\n"
#~ "Options:\n"
#~ "  --unsafe     set some additional possibly useful options.\n"
#~ "               warning: this option may garble an otherwise correct "
#~ "file.\n"
#~ "  --help       show this help message.\n"
#~ "  --version    show the version.\n"
#~ msgstr ""
#~ "用法：%s [<選項> ...] [--] [<目錄>]\n"
#~ "\n"
#~ "選項：\n"
#~ "  --unsafe     設定一些可能會有用的額外選項。\n"
#~ "               警告：這個選項可能會損毀原本正確的檔案。\n"
#~ "  --help       顯示這個說明訊息。\n"
#~ "  --version    顯示版本資訊。\n"

#~ msgid "try deleting %s"
#~ msgstr "嘗試刪除 %s"

#~ msgid "failed to install %s; it will be left as %s: %s"
#~ msgstr "無法安裝 %s；將被放在 %s：%s"

#~ msgid "%s: unable to unlock %s: %s"
#~ msgstr "%s：無法解除鎖定 %s：%s"

#~ msgid "%s - status is %s."
#~ msgstr "%s - 狀態為 %s。"

#~ msgid " link unreadable - %s"
#~ msgstr " 連結無法讀取 - %s"

#~ msgid ""
#~ "warning: %s is supposed to be a symlink to %s, \n"
#~ "or nonexistent; however, readlink failed: %s"
#~ msgstr ""
#~ "警告：%s 理應是指向 %s 的連結，\n"
#~ "或根本不存在；可是讀取連結卻失敗：%s"

#~ msgid "Leaving %s (%s) pointing to %s."
#~ msgstr "保留 %s (%s) 指向 %s。"

#~ msgid "Updating %s (%s) to point to %s."
#~ msgstr "正在更新 %s(%s) 以指向 %s。"

#~ msgid "Removing %s (%s), not appropriate with %s."
#~ msgstr "正在移除 %s(%s) ，不適用於 %s。"

#~ msgid ""
#~ "Checking available versions of %s, updating links in %s ...\n"
#~ "(You may modify the symlinks there yourself if desired - see `man ln'.)"
#~ msgstr ""
#~ "檢查 %s 的可用版本，更新 %s 的連結中 ...\n"
#~ "（你也可以依照自已的喜好來自行修改連結 - 請參閱 `man ln'。)"

#~ msgid "slave link name %s duplicated"
#~ msgstr "次要連結名稱 %s 已重複"

#~ msgid "Recovering from previous failed update of %s ..."
#~ msgstr "將 %s 回復成更新失敗之前的狀態 ..."

#~ msgid "unable to open %s for write: %s"
#~ msgstr "無法開啟 %s 以進行寫入：%s"

#~ msgid "Last package providing %s (%s) removed, deleting it."
#~ msgstr "最後一個提供 %s (%s) 的套件已移除，將其刪除。"

#~ msgid ""
#~ "There is only 1 program which provides %s\n"
#~ "(%s). Nothing to configure.\n"
#~ msgstr ""
#~ "只有一個程式提供了 %s\n"
#~ "(%s)。毋需任何設定。\n"

#~ msgid ""
#~ "There are %s alternatives which provide `%s'.\n"
#~ "\n"
#~ "  Selection    Alternative\n"
#~ "-----------------------------------------------\n"
#~ msgstr ""
#~ "提供了 `%2$s' 的可替換程式共有 %1$s 個。\n"
#~ "\n"
#~ "  選擇         可替換程式\n"
#~ "-----------------------------------------------\n"

#~ msgid "error or eof reading %s for %s (%s)"
#~ msgstr "在讀取 %2$s (%3$s) 的 %1$s 時發生錯誤或是讀取到 eof"

#~ msgid "missing newline after %s"
#~ msgstr "在 %s 後沒有換行符號"

#~ msgid "Serious problem: %s"
#~ msgstr "嚴重的問題：%s"