Source: e2fsprogs Section: admin Priority: required Maintainer: Theodore Y. Ts'o Build-Depends: texi2html (>= 1.76), gettext, texinfo, dc, pkg-config, dietlibc-dev (>> 0.30) [alpha amd64 arm hppa i386 ia64 mips mipsel powerpc ppc64 s390 sparc], debhelper (>= 7.0) Standards-Version: 3.8.1.0 Homepage: http://e2fsprogs.sourceforge.net Package: e2fsck-static Priority: optional Recommends: sash | bash-static | zsh-static | busybox-static | zsh30-static Architecture: any Description: statically-linked version of the ext2 filesystem checker This may be of some help to you if your filesystem gets corrupted enough to break the shared libraries used by the dynamically linked checker. . This binary takes much more space than its dynamic counterpart located in e2fsprogs, though. . You may want to install a statically-linked shell as well, to be able to run this program if something like your C library gets corrupted. Package: libcomerr2 Section: libs Provides: libcomerr-kth-compat Depends: ${shlibs:Depends} Replaces: e2fsprogs (<< 1.34-1) Architecture: any Description: common error description library libcomerr is an attempt to present a common error-handling mechanism to manipulate the most common form of error code in a fashion that does not have the problems identified with mechanisms commonly in use. Package: comerr-dev Section: libdevel Priority: extra Depends: libc6-dev | libc-dev, libcomerr2 (= ${mainBinary}) Suggests: doc-base Replaces: e2fslibs-dev (<< 1.33-2), libkrb5-dev (<< 1.3) Architecture: any Description: common error description library - headers and static libraries libcom_err is an attempt to present a common error-handling mechanism to manipulate the most common form of error code in a fashion that does not have the problems identified with mechanisms commonly in use. . This package contains the development environment for the com_err library. Package: libss2 Section: libs Depends: libcomerr2, ${shlibs:Depends} Replaces: e2fsprogs (<< 1.34-1) Architecture: any Description: command-line interface parsing library This package includes a tool that parses a command table to generate a simple command-line interface parser, the include files needed to compile and use it, and the static libs. . It was originally inspired by the Multics SubSystem library. Package: ss-dev Section: libdevel Priority: extra Depends: libc6-dev | libc-dev, libss2 (= ${mainBinary}), comerr-dev Architecture: any Description: command-line interface parsing library - headers and static libraries This package includes a tool that parses a command table to generate a simple command-line interface parser, the include files needed to compile and use it, and the static libs. . It was originally inspired by the Multics SubSystem library. . This package contains the development environment for the ss library. Package: libuuid1 Section: libs Depends: passwd, ${shlibs:Depends} Recommends: uuid-runtime Replaces: e2fsprogs (<< 1.34-1) Architecture: any Description: Universally Unique ID library The libuuid library generates and parses 128-bit universally unique id's (UUID's). A UUID is an identifier that is unique across both space and time, with respect to the space of all UUIDs. A UUID can be used for multiple purposes, from tagging objects with an extremely short lifetime, to reliably identifying very persistent objects across a network. . See RFC 4122 for more information. Package: uuid-runtime Section: libs Priority: optional Depends: passwd, libuuid1 (>> 1.40.3-1), ${shlibs:Depends} Replaces: e2fsprogs (<= 1.40.3-1ubuntu1) Architecture: any Description: runtime components for the Universally Unique ID library The libuuid library generates and parses 128-bit universally unique id's (UUID's). A UUID is an identifier that is unique across both space and time, with respect to the space of all UUIDs. A UUID can be used for multiple purposes, from tagging objects with an extremely short lifetime, to reliably identifying very persistent objects across a network. . See RFC 4122 for more information. . This package contains the uuidgen program and the uuidd daemon. . The uuidd daemon is used to generate UUIDs, especially time-based UUID’s, in a secure and guaranteed-unique fashion, even in the face of large numbers of threads trying to grab UUID’s running on different CPU’s. It is used by libuuid as well as the uuidgen program. Package: libuuid1-udeb XC-Package-Type: udeb Section: debian-installer Priority: optional Depends: ${shlibs:Depends} Architecture: any Description: stripped down universally unique id library, for debian-installer libuuid generates and parses 128-bit universally unique id's (UUID's). See RFC 4122 for more information. . This is a minimal package for debian-installer. Package: uuid-dev Section: libdevel Priority: extra Depends: libc6-dev | libc-dev, libuuid1 (= ${mainBinary}) Replaces: e2fslibs-dev (<< 1.15) Architecture: any Description: universally unique id library - headers and static libraries libuuid generates and parses 128-bit universally unique id's (UUID's). See RFC 4122 for more information. . This package contains the development environment for the uuid library. Package: libblkid1 Section: libs Depends: ${shlibs:Depends} Architecture: any Description: block device id library The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifying filesystems by hard-coded device names, but via a logical naming system instead. Package: libblkid1-udeb XC-Package-Type: udeb Section: debian-installer Priority: optional Depends: ${shlibs:Depends} Architecture: any Description: stripped down block device id library, for debian-installer The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifiying filesystems by hard-coded device names, but via a logical naming system instead. . This is a minimal package for debian-installer. Package: libblkid-dev Section: libdevel Priority: extra Depends: libc6-dev | libc-dev, libblkid1 (= ${binary:Version}) Architecture: any Description: block device id library - headers and static libraries The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifiying filesystems by hard-coded device names, but via a logical naming system instead. . This package contains the development environment for the blkid library. Package: e2fsprogs-udeb XC-Package-Type: udeb Section: debian-installer Priority: optional Depends: ${shlibs:Depends} Architecture: any Description: stripped-down versions of e2fsprogs, for debian-installer This package is an e2fsprogs package built for a reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway it should refuse to install. Package: e2fslibs Section: libs Depends: ${shlibs:Depends} Replaces: e2fsprogs (<< 1.34-1) Provides: libext2fs2, libe2p2 Architecture: any Description: ext2 filesystem libraries The ext2fs and e2p libraries are used by programs that directly access EXT2 filesystems from usermode programs. The EXT2 filesystem is very often used as the default filesystem on Linux systems. Various system programs that use libext2fs include e2fsck, mke2fs, tune2fs, etc. Programs that use libe2p include dumpe2fs, chattr, and lsattr. Package: e2fslibs-dev Section: libdevel Priority: extra Depends: libc6-dev | libc-dev, comerr-dev, e2fslibs (= ${binary:Version}) Suggests: doc-base Provides: ext2fs-dev, e2p-dev Replaces: libkrb5-dev (<< 1.3) Architecture: any Description: ext2 filesystem libraries - headers and static libraries The ext2fs and e2p libraries are used by programs that directly access EXT2 filesystems from usermode programs. The EXT2 filesystem is very often used as the default filesystem on Linux systems. Various system programs that use libext2fs include e2fsck, mke2fs, tune2fs, etc. Programs that use libe2p include dumpe2fs, chattr, and lsattr. . This package contains the development environment for the ext2fs and e2p libraries. Package: e2fsprogs Essential: yes Pre-Depends: ${shlibs:Depends} Suggests: gpart, parted, e2fsck-static Conflicts: dump (<< 0.4b4-4), quota (<< 1.55-8.1), initscripts (<< 2.85-4), sysvinit (<< 2.85-4) Replaces: hurd (<= 20040301-1), libblkid1 (<< 1.38+1.39-WIP-2005.12.10-2), libuuid1 (<< 1.38+1.39-WIP-2005.12.10-2) Architecture: any Description: ext2/ext3/ext4 file system utilities The ext2, ext3 and ext4 file systems are successors of the original ext ("extended") file system. They are the main file system types used for hard disks on Debian and other Linux systems. . This package contains programs for creating, checking, and maintaining ext-based file systems, and the generic fsck wrapper. Package: e2fsprogs-dbg Section: debug Priority: extra Depends: e2fsprogs (= ${binary:Version}) Architecture: any Description: Debugging information for e2fsprogs This package includes the debug information useful for debugging e2fsprogs and its libraries, contained in the e2fsprogs and e2fsck-static packages. The debug information is used for execution tracing and core dump analysis. Package: uuid-runtime-dbg Section: debug Priority: extra Depends: uuid-runtime (= ${binary:Version}) Architecture: any Description: Debugging information for uuid-runtime This package includes the debug information useful for debugging the uuid runtime programs, contained in the uuid-runtime package. The debugging information is used for execution tracing and core dump analysis. Package: e2fslibs-dbg Section: debug Priority: extra Depends: e2fslibs (= ${binary:Version}) Architecture: any Description: Debugging information for e2fslibs This package includes the debug information useful for debugging the ext2fs and e2p libraries, contained in the e2fslibs package. The debug information is used for execution tracing and core dump analysis. Package: libcomerr2-dbg Section: debug Priority: extra Depends: libcomerr2 (= ${binary:Version}) Architecture: any Description: Debugging information for libcomerr2 This package includes the debug information useful for debugging the com_err library, contained in the libcomerr2 package. The debugging information is used for execution tracing and core dump analysis. Package: libss2-dbg Section: debug Priority: extra Depends: libss2 (= ${binary:Version}) Architecture: any Description: Debugging information for libss2 This package includes the debug information useful for debugging the ss library, contained in the libss2 package. The debug information is used for execution tracing and core dump analysis. Package: libblkid1-dbg Section: debug Priority: extra Depends: libblkid1 (= ${binary:Version}) Architecture: any Description: Debugging information for libblkid1 This package includes the debug information useful for debugging the blkid library, contained in the libblkid1 package. The debug information is used for execution tracing and core dump analysis. Package: libuuid1-dbg Section: debug Priority: extra Depends: libuuid1 (= ${binary:Version}) Architecture: any Description: Debugging information for libuuid1 This package includes the debug information useful for debugging the UUID library, contained in the libuuid1 package. The debug information is used for execution tracing and core dump analysis.