--- a/src/configure.ac
+++ b/src/configure.ac
@@ -111,11 +111,11 @@
 ### or a host dependent tool.  Then put it into the appropriate list
 ### (library or tools, host or target), doing a dependency sort.
 
-# Subdirs will be configured in the order listed in build_configdirs, 
+# Subdirs will be configured in the order listed in build_configdirs,
 # configdirs, or target_configdirs; see the serialization section below.
 
-# Dependency sorting is only needed when *configuration* must be done in 
-# a particular order.  In all cases a dependency should be specified in 
+# Dependency sorting is only needed when *configuration* must be done in
+# a particular order.  In all cases a dependency should be specified in
 # the Makefile, whether or not it's implicitly specified here.
 
 # Double entries in build_configdirs, configdirs, or target_configdirs may
@@ -162,6 +162,7 @@
 		target-libffi \
 		target-libobjc \
 		target-libada \
+		target-libgm2 \
 		target-libgo \
 		target-libphobos \
 		target-zlib"
@@ -209,7 +210,7 @@
   is_cross_compiler=no
 else
   is_cross_compiler=yes
-fi	
+fi
 
 # Find the build and target subdir names.
 GCC_TOPLEV_SUBDIRS
@@ -247,7 +248,7 @@
   noconfigdirs="$noconfigdirs zlib"
 fi
 
-# some tools are so dependent upon X11 that if we're not building with X, 
+# some tools are so dependent upon X11 that if we're not building with X,
 # it's not even worth trying to configure, much less build, that tool.
 
 case ${with_x} in
@@ -255,7 +256,7 @@
   no)
     skipdirs="${skipdirs} tk itcl libgui"
     # We won't be able to build gdbtk without X.
-    enable_gdbtk=no 
+    enable_gdbtk=no
     ;;
   *)  echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;;
 esac
@@ -411,7 +412,7 @@
 # Only spaces may be used in this macro; not newlines or tabs.
 unsupported_languages=
 
-# Remove more programs from consideration, based on the host or 
+# Remove more programs from consideration, based on the host or
 # target this usually means that a port of the program doesn't
 # exist yet.
 
@@ -451,6 +452,12 @@
   noconfigdirs="$noconfigdirs gnattools"
 fi
 
+AC_ARG_ENABLE(libgm2,
+[AS_HELP_STRING([--enable-libgm2], [build libgm2 directory])],
+ENABLE_LIBGM2=$enableval,
+ENABLE_LIBGM2=yes)
+
+
 AC_ARG_ENABLE(libssp,
 [AS_HELP_STRING([--enable-libssp], [build libssp directory])],
 ENABLE_LIBSSP=$enableval,
@@ -907,7 +914,7 @@
     ;;
   *-*-lynxos*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
-    ;; 
+    ;;
   *-*-mingw*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
@@ -1247,7 +1254,7 @@
   hppa*-hp-hpux*)
     host_makefile_frag="config/mh-pa"
     ;;
-  hppa*-*)	
+  hppa*-*)
     host_makefile_frag="config/mh-pa"
     ;;
   *-*-darwin*)
@@ -1270,6 +1277,7 @@
   GFORTRAN_FOR_BUILD=${GFORTRAN_FOR_BUILD-gfortran}
   GOC_FOR_BUILD=${GOC_FOR_BUILD-gccgo}
   GDC_FOR_BUILD=${GDC_FOR_BUILD-gdc}
+  GM2_FOR_BUILD=${GM2_FOR_BUILD-gm2}
   DLLTOOL_FOR_BUILD=${DLLTOOL_FOR_BUILD-dlltool}
   LD_FOR_BUILD=${LD_FOR_BUILD-ld}
   NM_FOR_BUILD=${NM_FOR_BUILD-nm}
@@ -1284,6 +1292,7 @@
   GFORTRAN_FOR_BUILD="\$(GFORTRAN)"
   GOC_FOR_BUILD="\$(GOC)"
   GDC_FOR_BUILD="\$(GDC)"
+  GM2_FOR_BUILD="\$(GM2)"
   DLLTOOL_FOR_BUILD="\$(DLLTOOL)"
   LD_FOR_BUILD="\$(LD)"
   NM_FOR_BUILD="\$(NM)"
@@ -1907,7 +1916,7 @@
       # an apparent bug in bash 1.12 on linux.
       ${srcdir}/gcc/[[*]]/config-lang.in) ;;
       *)
-        # From the config-lang.in, get $language, $target_libs, 
+        # From the config-lang.in, get $language, $target_libs,
         # $lang_dirs, $boot_language, and $build_by_default
         language=
         target_libs=
@@ -2140,7 +2149,7 @@
 AC_ARG_WITH([target-bdw-gc-lib],
 [AS_HELP_STRING([--with-target-bdw-gc-lib=PATHLIST],
 		[specify directories for installed bdw-gc library])])
-		  
+
 case ,${enable_languages},:${enable_objc_gc} in *,objc,*:yes|*,objc,*:auto)
   AC_MSG_CHECKING([for bdw garbage collector])
   if test "x$with_target_bdw_gc$with_target_bdw_gc_include$with_target_bdw_gc_lib" = x; then
@@ -2219,7 +2228,7 @@
 build_configdirs_all="$build_configdirs"
 build_configdirs=
 for i in ${build_configdirs_all} ; do
-  j=`echo $i | sed -e s/build-//g` 
+  j=`echo $i | sed -e s/build-//g`
   if test -f ${srcdir}/$j/configure ; then
     build_configdirs="${build_configdirs} $i"
   fi
@@ -2236,7 +2245,7 @@
 target_configdirs_all="$target_configdirs"
 target_configdirs=
 for i in ${target_configdirs_all} ; do
-  j=`echo $i | sed -e s/target-//g` 
+  j=`echo $i | sed -e s/target-//g`
   if test -f ${srcdir}/$j/configure ; then
     target_configdirs="${target_configdirs} $i"
   fi
@@ -2322,7 +2331,7 @@
 
 copy_dirs=
 
-AC_ARG_WITH([build-sysroot], 
+AC_ARG_WITH([build-sysroot],
   [AS_HELP_STRING([--with-build-sysroot=SYSROOT],
 		  [use sysroot as the system root during the build])],
   [if test x"$withval" != x ; then
@@ -2421,11 +2430,11 @@
 # This is done by determining whether or not the appropriate directory
 # is available, and by checking whether or not specific configurations
 # have requested that this magic not happen.
-# 
-# The command line options always override the explicit settings in 
+#
+# The command line options always override the explicit settings in
 # configure.ac, and the settings in configure.ac override this magic.
 #
-# If the default for a toolchain is to use GNU as and ld, and you don't 
+# If the default for a toolchain is to use GNU as and ld, and you don't
 # want to do that, then you should use the --without-gnu-as and
 # --without-gnu-ld options for the configure script.  Similarly, if
 # the default is to use the included zlib and you don't want to do that,
@@ -2532,7 +2541,7 @@
     target_makefile_frag="config/mt-gnu"
     ;;
   *-*-aix4.[[3456789]]* | *-*-aix[[56789]].*)
-    # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm 
+    # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm
     # commands to handle both 32-bit and 64-bit objects.  These flags are
     # harmless if we're using GNU nm or ar.
     extra_arflags_for_target=" -X32_64"
@@ -2602,7 +2611,7 @@
   if test -s conftest || test -s conftest.exe ; then
     we_are_ok=yes
   fi
-fi 
+fi
 case $we_are_ok in
   no)
     echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."
@@ -3017,7 +3026,7 @@
 # --program-suffix have been applied to it.  Autoconf has already
 # doubled dollar signs and backslashes in program_transform_name; we want
 # the backslashes un-doubled, and then the entire thing wrapped in single
-# quotes, because this will be expanded first by make and then by the shell. 
+# quotes, because this will be expanded first by make and then by the shell.
 # Also, because we want to override the logic in subdir configure scripts to
 # choose program_transform_name, replace any s,x,x, with s,y,y,.
 sed -e "s,\\\\\\\\,\\\\,g; s,','\\\\'',g; s/s,x,x,/s,y,y,/" <<EOF_SED > conftestsed.out
@@ -3086,7 +3095,7 @@
       if test -s conftest || test -s conftest.exe ; then
 	dev64=yes
       fi
-    fi 
+    fi
     rm -f conftest*
     if test x${dev64} != xyes ; then
       AC_MSG_ERROR([I suspect your system does not have 32-bit development libraries (libc and headers). If you have them, rerun configure with --enable-multilib. If you do not have them, and want to build a 64-bit-only compiler, rerun configure with --disable-multilib.])
@@ -3272,6 +3281,7 @@
 AC_SUBST(GFORTRAN_FOR_BUILD)
 AC_SUBST(GOC_FOR_BUILD)
 AC_SUBST(GDC_FOR_BUILD)
+AC_SUBST(GM2_FOR_BUILD)
 AC_SUBST(LDFLAGS_FOR_BUILD)
 AC_SUBST(LD_FOR_BUILD)
 AC_SUBST(NM_FOR_BUILD)
@@ -3365,7 +3375,7 @@
 AC_SUBST(CXXFLAGS)
 
 # Target tools.
-AC_ARG_WITH([build-time-tools], 
+AC_ARG_WITH([build-time-tools],
   [AS_HELP_STRING([--with-build-time-tools=PATH],
 		  [use given path to find target tools during the build])],
   [case x"$withval" in
@@ -3383,6 +3393,7 @@
 NCN_STRICT_CHECK_TARGET_TOOLS(GFORTRAN_FOR_TARGET, gfortran)
 NCN_STRICT_CHECK_TARGET_TOOLS(GOC_FOR_TARGET, gccgo)
 NCN_STRICT_CHECK_TARGET_TOOLS(GDC_FOR_TARGET, gdc)
+NCN_STRICT_CHECK_TARGET_TOOLS(GM2_FOR_TARGET, gm2)
 
 ACX_CHECK_INSTALLED_TARGET_TOOL(AR_FOR_TARGET, ar)
 ACX_CHECK_INSTALLED_TARGET_TOOL(AS_FOR_TARGET, as)
@@ -3419,6 +3430,8 @@
 		[gcc/gccgo -B$$r/$(HOST_SUBDIR)/gcc/], go)
 GCC_TARGET_TOOL(gdc, GDC_FOR_TARGET, GDC,
 		[gcc/gdc -B$$r/$(HOST_SUBDIR)/gcc/], d)
+GCC_TARGET_TOOL(gm2, GM2_FOR_TARGET, GM2,
+		[gcc/xgm2 -B$$r/$(HOST_SUBDIR)/gcc/], gm2)
 GCC_TARGET_TOOL(ld, LD_FOR_TARGET, LD, [ld/ld-new])
 GCC_TARGET_TOOL(lipo, LIPO_FOR_TARGET, LIPO)
 GCC_TARGET_TOOL(nm, NM_FOR_TARGET, NM, [binutils/nm-new])
@@ -3474,7 +3487,7 @@
 else
   MAINTAINER_MODE_TRUE='#'
   MAINTAINER_MODE_FALSE=
-fi	
+fi
 MAINT=$MAINTAINER_MODE_TRUE
 AC_SUBST(MAINT)dnl
 
--- a/src/gcc/c/gccspec.c
+++ b/src/gcc/c/gccspec.c
@@ -105,3 +105,9 @@
 
 /* Number of extra output files that lang_specific_pre_link may generate.  */
 int lang_specific_extra_outfiles = 0;  /* Not used for C.  */
+
+/* lang_register_spec_functions.  Not used for C.  */
+void
+lang_register_spec_functions (void)
+{
+}
--- a/src/gcc/c-family/cppspec.c
+++ b/src/gcc/c-family/cppspec.c
@@ -198,3 +198,9 @@
 
 /* Number of extra output files that lang_specific_pre_link may generate.  */
 int lang_specific_extra_outfiles = 0;  /* Not used for cpp.  */
+
+/* lang_register_spec_functions.  Not used for cpp.  */
+void
+lang_register_spec_functions (void)
+{
+}
--- a/src/gcc/cp/g++spec.c
+++ b/src/gcc/cp/g++spec.c
@@ -403,3 +403,9 @@
 
 /* Number of extra output files that lang_specific_pre_link may generate.  */
 int lang_specific_extra_outfiles = 0;  /* Not used for C++.  */
+
+/* lang_register_spec_functions.  Not used for C++.  */
+void
+lang_register_spec_functions (void)
+{
+}
--- a/src/gcc/gcc.c
+++ b/src/gcc/gcc.c
@@ -305,6 +305,10 @@
 static const char *cross_compile = "0";
 #endif
 
+/* The lang specs might wish to override the default linker.
+ */
+int allow_linker = 1;
+
 /* Greatest exit code of sub-processes that has been encountered up to
    now.  */
 static int greatest_status = 1;
@@ -410,6 +414,7 @@
 static const char *debug_level_greater_than_spec_func (int, const char **);
 static const char *find_fortran_preinclude_file (int, const char **);
 static char *convert_white_space (char *);
+static void handle_OPT_B (const char *arg);
 
 /* The Specs Language
 
@@ -1032,6 +1037,7 @@
 /* We pass any -flto flags on to the linker, which is expected
    to understand them.  In practice, this means it had better be collect2.  */
 /* %{e*} includes -export-dynamic; see comment in common.opt.  */
+
 #ifndef LINK_COMMAND_SPEC
 #define LINK_COMMAND_SPEC "\
 %{!fsyntax-only:%{!c:%{!M:%{!MM:%{!E:%{!S:\
@@ -1655,6 +1661,10 @@
   { 0, 0 }
 };
 
+/* front end registered spec functions */
+static struct spec_function *lang_spec_functions = NULL;
+static unsigned int lang_spec_functions_length = 0;
+
 static int processing_spec_function;
 
 /* Add appropriate libgcc specs to OBSTACK, taking into account
@@ -3725,6 +3735,81 @@
   setenv ("SOURCE_DATE_EPOCH", source_date_epoch, 0);
 }
 
+/* Save an option OPT with N_ARGS arguments in array ARGS, marking it
+   as validated if VALIDATED.  */
+
+void
+fe_save_switch (const char *opt, size_t n_args, const char *const *args,
+		bool validated, bool known)
+{
+  save_switch (opt, n_args, args, validated, known);
+}
+
+void fe_B_prefix (const char *arg)
+{
+  handle_OPT_B (arg);
+}
+
+void
+fe_add_linker_option (const char *option)
+{
+  add_linker_option (option, strlen (option));
+}
+
+/*  Handle the -B option by adding the prefix to exec, startfile and
+    include search paths.  */
+
+static
+void handle_OPT_B (const char *arg)
+{
+  size_t len = strlen (arg);
+
+  /* Catch the case where the user has forgotten to append a
+     directory separator to the path.  Note, they may be using
+     -B to add an executable name prefix, eg "i386-elf-", in
+     order to distinguish between multiple installations of
+     GCC in the same directory.  Hence we must check to see
+     if appending a directory separator actually makes a
+     valid directory name.  */
+  if (!IS_DIR_SEPARATOR (arg[len - 1])
+      && is_directory (arg, false))
+    {
+      char *tmp = XNEWVEC (char, len + 2);
+      strcpy (tmp, arg);
+      tmp[len] = DIR_SEPARATOR;
+      tmp[++len] = 0;
+      arg = tmp;
+    }
+
+  add_prefix (&exec_prefixes, arg, NULL,
+	      PREFIX_PRIORITY_B_OPT, 0, 0);
+  add_prefix (&startfile_prefixes, arg, NULL,
+	      PREFIX_PRIORITY_B_OPT, 0, 0);
+  add_prefix (&include_prefixes, arg, NULL,
+	      PREFIX_PRIORITY_B_OPT, 0, 0);
+}
+
+/* Save the infile.  */
+
+void
+fe_add_infile (const char *infile, const char *lang)
+{
+  add_infile (infile, lang);
+}
+
+/* Remove an object file, name.  */
+
+void
+fe_remove_infile (const char *name)
+{
+  int max = n_infiles + lang_specific_extra_outfiles;
+  int i;
+
+  for (i = 0; i < max; i++)
+    if (filename_cmp (name, infiles[i].name) == 0)
+      infiles[i].compiled = true;
+}
+
 /* Handle an option DECODED that is unknown to the option-processing
    machinery.  */
 
@@ -4204,33 +4289,7 @@
       break;
 
     case OPT_B:
-      {
-	size_t len = strlen (arg);
-
-	/* Catch the case where the user has forgotten to append a
-	   directory separator to the path.  Note, they may be using
-	   -B to add an executable name prefix, eg "i386-elf-", in
-	   order to distinguish between multiple installations of
-	   GCC in the same directory.  Hence we must check to see
-	   if appending a directory separator actually makes a
-	   valid directory name.  */
-	if (!IS_DIR_SEPARATOR (arg[len - 1])
-	    && is_directory (arg, false))
-	  {
-	    char *tmp = XNEWVEC (char, len + 2);
-	    strcpy (tmp, arg);
-	    tmp[len] = DIR_SEPARATOR;
-	    tmp[++len] = 0;
-	    arg = tmp;
-	  }
-
-	add_prefix (&exec_prefixes, arg, NULL,
-		    PREFIX_PRIORITY_B_OPT, 0, 0);
-	add_prefix (&startfile_prefixes, arg, NULL,
-		    PREFIX_PRIORITY_B_OPT, 0, 0);
-	add_prefix (&include_prefixes, arg, NULL,
-		    PREFIX_PRIORITY_B_OPT, 0, 0);
-      }
+      handle_OPT_B (arg);
       validated = true;
       break;
 
@@ -5993,7 +6052,7 @@
 		     "%{foo=*:bar%*}%{foo=*:one%*two}"
 
 		   matches -foo=hello then it will produce:
-		   
+
 		     barhello onehellotwo
 		*/
 		if (*p == 0 || *p == '}')
@@ -6070,6 +6129,33 @@
   return 0;
 }
 
+/* Allow the front end to register a spec function.  */
+
+void fe_add_spec_function (const char *name, const char *(*func) (int, const char **))
+{
+  const struct spec_function *f = lookup_spec_function (name);
+  struct spec_function *fl;
+  unsigned int i;
+
+  if (f != NULL)
+    fatal_error (input_location, "spec function (%s) already registered", name);
+
+  if (lang_spec_functions == NULL)
+    lang_spec_functions_length = 1;
+
+  lang_spec_functions_length++;
+  fl = (struct spec_function *) xmalloc (sizeof (const struct spec_function)*lang_spec_functions_length);
+  for (i=0; i<lang_spec_functions_length-2; i++)
+    fl[i] = lang_spec_functions[i];
+  free (lang_spec_functions);
+  lang_spec_functions = fl;
+
+  lang_spec_functions[lang_spec_functions_length-2].name = name;
+  lang_spec_functions[lang_spec_functions_length-2].func = func;
+  lang_spec_functions[lang_spec_functions_length-1].name = NULL;
+  lang_spec_functions[lang_spec_functions_length-1].func = NULL;
+}
+
 /* Look up a spec function.  */
 
 static const struct spec_function *
@@ -6081,6 +6167,11 @@
     if (strcmp (sf->name, name) == 0)
       return sf;
 
+  if (lang_spec_functions != NULL)
+    for (sf = lang_spec_functions; sf->name != NULL; sf++)
+      if (strcmp (sf->name, name) == 0)
+	return sf;
+
   return NULL;
 }
 
@@ -7563,6 +7654,8 @@
 			   accel_dir_suffix, dir_separator_str, NULL);
   just_machine_suffix = concat (spec_machine, dir_separator_str, NULL);
 
+  lang_register_spec_functions ();
+
   specs_file = find_a_file (&startfile_prefixes, "specs", R_OK, true);
   /* Read the specs file unless it is a default one.  */
   if (specs_file != 0 && strcmp (specs_file, "specs"))
@@ -8257,7 +8350,8 @@
 
   /* Run ld to link all the compiler output files.  */
 
-  if (num_linker_inputs > 0 && !seen_error () && print_subprocess_help < 2)
+  if (num_linker_inputs > 0 && !seen_error () && print_subprocess_help < 2
+      && allow_linker)
     {
       int tmp = execution_count;
 
@@ -8324,7 +8418,7 @@
   /* If options said don't run linker,
      complain about input files to be given to the linker.  */
 
-  if (! linker_was_run && !seen_error ())
+  if (! linker_was_run && !seen_error () && allow_linker)
     for (i = 0; (int) i < n_infiles; i++)
       if (explicit_link_files[i]
 	  && !(infiles[i].language && infiles[i].language[0] == '*'))
@@ -9631,9 +9725,9 @@
 get_random_number (void)
 {
   unsigned HOST_WIDE_INT ret = 0;
-  int fd; 
+  int fd;
 
-  fd = open ("/dev/urandom", O_RDONLY); 
+  fd = open ("/dev/urandom", O_RDONLY);
   if (fd >= 0)
     {
       read (fd, &ret, sizeof (HOST_WIDE_INT));
@@ -9993,16 +10087,16 @@
 }
 
 
-/* Insert backslash before spaces in ORIG (usually a file path), to 
+/* Insert backslash before spaces in ORIG (usually a file path), to
    avoid being broken by spec parser.
 
    This function is needed as do_spec_1 treats white space (' ' and '\t')
    as the end of an argument. But in case of -plugin /usr/gcc install/xxx.so,
    the file name should be treated as a single argument rather than being
-   broken into multiple. Solution is to insert '\\' before the space in a 
+   broken into multiple. Solution is to insert '\\' before the space in a
    file name.
-   
-   This function converts and only converts all occurrence of ' ' 
+
+   This function converts and only converts all occurrence of ' '
    to '\\' + ' ' and '\t' to '\\' + '\t'.  For example:
    "a b"  -> "a\\ b"
    "a  b" -> "a\\ \\ b"
--- a/src/gcc/gcc.h
+++ b/src/gcc/gcc.h
@@ -72,9 +72,17 @@
 extern int do_spec (const char *);
 extern void record_temp_file (const char *, int, int);
 extern void set_input (const char *);
+extern void fe_save_switch (const char *opt, size_t n_args,
+			    const char *const *args, bool validated);
+extern void fe_B_prefix (const char *arg);
+extern void fe_add_infile (const char *infile, const char *lang);
+extern void fe_add_linker_option (const char *option);
+extern void fe_add_spec_function (const char *name, const char *(*func) (int, const char **));
 
 /* Spec files linked with gcc.c must provide definitions for these.  */
 
+extern void lang_register_spec_functions (void);
+
 /* Called before processing to change/add/remove arguments.  */
 extern void lang_specific_driver (struct cl_decoded_option **,
 				  unsigned int *, int *);
@@ -96,4 +104,8 @@
 					      void *user_data),
 				   void *user_data);
 
+/* Default setting is true, but can be overridden by the language
+   front end to prohibit the linker from being invoked.  */
+extern int allow_linker;
+
 #endif /* ! GCC_GCC_H */
--- a/src/Makefile.def
+++ b/src/Makefile.def
@@ -10,12 +10,12 @@
 // it under the terms of the GNU General Public License as published by
 // the Free Software Foundation; either version 3 of the License, or
 // (at your option) any later version.
-// 
+//
 // This program is distributed in the hope that it will be useful,
 // but WITHOUT ANY WARRANTY; without even the implied warranty of
 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 // GNU General Public License for more details.
-// 
+//
 // You should have received a copy of the GNU General Public License
 // along with this program; see the file COPYING3.  If not see
 // <http://www.gnu.org/licenses/>.
@@ -45,7 +45,7 @@
 		missing= TAGS; };
 host_modules= { module= flex; no_check_cross= true; };
 host_modules= { module= gas; bootstrap=true; };
-host_modules= { module= gcc; bootstrap=true; 
+host_modules= { module= gcc; bootstrap=true;
 		extra_make_flags="$(EXTRA_GCC_FLAGS)"; };
 host_modules= { module= gmp; lib_path=.libs; bootstrap=true;
 		// Work around in-tree gmp configure bug with missing flex.
@@ -116,7 +116,7 @@
 host_modules= { module= expect; };
 host_modules= { module= guile; };
 host_modules= { module= tk; };
-host_modules= { module= libtermcap; no_check=true; 
+host_modules= { module= libtermcap; no_check=true;
                 missing=mostlyclean;
                 missing=clean;
                 missing=distclean;
@@ -166,6 +166,7 @@
 target_modules = { module= zlib; };
 target_modules = { module= rda; };
 target_modules = { module= libada; };
+target_modules = { module= libgm2; lib_path=.libs; };
 target_modules = { module= libgomp; bootstrap= true; lib_path=.libs; };
 target_modules = { module= libitm; lib_path=.libs; };
 target_modules = { module= libatomic; lib_path=.libs; };
@@ -174,26 +175,26 @@
 // Not all; these are the ones which don't have special options.
 // "depend" indicates that a target depends on another target uniformly
 // for each subdirectory.  There can be several such lines per target.
-recursive_targets = { make_target= info; 
+recursive_targets = { make_target= info;
                       depend=configure; };
-recursive_targets = { make_target= dvi; 
+recursive_targets = { make_target= dvi;
                       depend=configure; };
-recursive_targets = { make_target= pdf; 
+recursive_targets = { make_target= pdf;
                       depend=configure; };
-recursive_targets = { make_target= html; 
+recursive_targets = { make_target= html;
                       depend=configure; };
-recursive_targets = { make_target= TAGS; 
+recursive_targets = { make_target= TAGS;
                       depend=configure; };
-recursive_targets = { make_target= install-info; 
+recursive_targets = { make_target= install-info;
                       depend=configure;
                       depend=info; };
-recursive_targets = { make_target= install-pdf; 
+recursive_targets = { make_target= install-pdf;
                       depend=configure;
                       depend=pdf; };
-recursive_targets = { make_target= install-html; 
+recursive_targets = { make_target= install-html;
                       depend=configure;
                       depend=html; };
-recursive_targets = { make_target= installcheck; 
+recursive_targets = { make_target= installcheck;
                       depend=configure; };
 recursive_targets = { make_target= mostlyclean; };
 recursive_targets = { make_target= clean; };
@@ -284,6 +285,8 @@
 flags_to_pass = { flag= GOCFLAGS_FOR_TARGET ; };
 flags_to_pass = { flag= GDC_FOR_TARGET ; };
 flags_to_pass = { flag= GDCFLAGS_FOR_TARGET ; };
+flags_to_pass = { flag= GM2_FOR_TARGET ; };
+flags_to_pass = { flag= GM2FLAGS_FOR_TARGET ; };
 flags_to_pass = { flag= LD_FOR_TARGET ; };
 flags_to_pass = { flag= LIPO_FOR_TARGET ; };
 flags_to_pass = { flag= LDFLAGS_FOR_TARGET ; };
@@ -608,6 +611,7 @@
 languages = { language=go;	gcc-check-target=check-go;
 				lib-check-target=check-target-libgo;
 				lib-check-target=check-gotools; };
+languages = { language=gm2;	gcc-check-target=check-gm2; };
 languages = { language=brig;	gcc-check-target=check-brig;
 				lib-check-target=check-target-libhsail-rt; };
 languages = { language=d;	gcc-check-target=check-d;
--- a/src/Makefile.in
+++ b/src/Makefile.in
@@ -10,12 +10,12 @@
 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 3 of the License, or
 # (at your option) any later version.
-# 
+#
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
-# 
+#
 # You should have received a copy of the GNU General Public License
 # along with this program; see the file COPYING3.  If not see
 # <http://www.gnu.org/licenses/>.
@@ -158,6 +158,7 @@
 	GOCFLAGS="$(GOCFLAGS_FOR_BUILD)"; export GOCFLAGS; \
 	GDC="$(GDC_FOR_BUILD)"; export GDC; \
 	GDCFLAGS="$(GDCFLAGS_FOR_BUILD)"; export GDCFLAGS; \
+	GM2="$(GM2_FOR_BUILD)"; export GM2; \
 	DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \
 	LD="$(LD_FOR_BUILD)"; export LD; \
 	LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \
@@ -195,6 +196,7 @@
 	GFORTRAN="$(GFORTRAN)"; export GFORTRAN; \
 	GOC="$(GOC)"; export GOC; \
 	GDC="$(GDC)"; export GDC; \
+	GM2="$(GM2)"; export GM2; \
 	AR="$(AR)"; export AR; \
 	AS="$(AS)"; export AS; \
 	CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \
@@ -292,6 +294,7 @@
 	GFORTRAN="$(GFORTRAN_FOR_TARGET) $(XGCC_FLAGS_FOR_TARGET) $$TFLAGS"; export GFORTRAN; \
 	GOC="$(GOC_FOR_TARGET) $(XGCC_FLAGS_FOR_TARGET) $$TFLAGS"; export GOC; \
 	GDC="$(GDC_FOR_TARGET) $(XGCC_FLAGS_FOR_TARGET) $$TFLAGS"; export GDC; \
+	GM2="$(GM2_FOR_TARGET) $(XGCC_FLAGS_FOR_TARGET) $$TFLAGS"; export GM2; \
 	DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
 	LD="$(COMPILER_LD_FOR_TARGET)"; export LD; \
 	LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
@@ -358,6 +361,7 @@
 GFORTRAN_FOR_BUILD = @GFORTRAN_FOR_BUILD@
 GOC_FOR_BUILD = @GOC_FOR_BUILD@
 GDC_FOR_BUILD = @GDC_FOR_BUILD@
+GM2_FOR_BUILD = @GM2_FOR_BUILD@
 LDFLAGS_FOR_BUILD = @LDFLAGS_FOR_BUILD@
 LD_FOR_BUILD = @LD_FOR_BUILD@
 NM_FOR_BUILD = @NM_FOR_BUILD@
@@ -427,6 +431,7 @@
 LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
 GOCFLAGS = $(CFLAGS)
 GDCFLAGS = $(CFLAGS)
+GM2FLAGS = $(CFLAGS)
 
 CREATE_GCOV = create_gcov
 
@@ -594,6 +599,7 @@
 GFORTRAN_FOR_TARGET=$(STAGE_CC_WRAPPER) @GFORTRAN_FOR_TARGET@
 GOC_FOR_TARGET=$(STAGE_CC_WRAPPER) @GOC_FOR_TARGET@
 GDC_FOR_TARGET=$(STAGE_CC_WRAPPER) @GDC_FOR_TARGET@
+GM2_FOR_TARGET=$(STAGE_CC_WRAPPER) @GM2_FOR_TARGET@
 DLLTOOL_FOR_TARGET=@DLLTOOL_FOR_TARGET@
 LD_FOR_TARGET=@LD_FOR_TARGET@
 
@@ -644,7 +650,7 @@
 
 # This is the list of directories that may be needed in RPATH_ENVVAR
 # so that programs built for the target machine work.
-TARGET_LIB_PATH = $(TARGET_LIB_PATH_libstdc++-v3)$(TARGET_LIB_PATH_libsanitizer)$(TARGET_LIB_PATH_libvtv)$(TARGET_LIB_PATH_liboffloadmic)$(TARGET_LIB_PATH_libssp)$(TARGET_LIB_PATH_libphobos)$(TARGET_LIB_PATH_libgomp)$(TARGET_LIB_PATH_libitm)$(TARGET_LIB_PATH_libatomic)$(HOST_LIB_PATH_gcc)
+TARGET_LIB_PATH = $(TARGET_LIB_PATH_libstdc++-v3)$(TARGET_LIB_PATH_libsanitizer)$(TARGET_LIB_PATH_libvtv)$(TARGET_LIB_PATH_liboffloadmic)$(TARGET_LIB_PATH_libssp)$(TARGET_LIB_PATH_libphobos)$(TARGET_LIB_PATH_libgm2)$(TARGET_LIB_PATH_libgomp)$(TARGET_LIB_PATH_libitm)$(TARGET_LIB_PATH_libatomic)$(HOST_LIB_PATH_gcc)
 
 @if target-libstdc++-v3
 TARGET_LIB_PATH_libstdc++-v3 = $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs:
@@ -670,6 +676,10 @@
 TARGET_LIB_PATH_libphobos = $$r/$(TARGET_SUBDIR)/libphobos/src/.libs:
 @endif target-libphobos
 
+@if target-libgm2
+TARGET_LIB_PATH_libgm2 = $$r/$(TARGET_SUBDIR)/libgm2/.libs:
+@endif target-libgm2
+
 @if target-libgomp
 TARGET_LIB_PATH_libgomp = $$r/$(TARGET_SUBDIR)/libgomp/.libs:
 @endif target-libgomp
@@ -819,6 +829,8 @@
 	"GOCFLAGS_FOR_TARGET=$(GOCFLAGS_FOR_TARGET)" \
 	"GDC_FOR_TARGET=$(GDC_FOR_TARGET)" \
 	"GDCFLAGS_FOR_TARGET=$(GDCFLAGS_FOR_TARGET)" \
+	"GM2_FOR_TARGET=$(GM2_FOR_TARGET)" \
+	"GM2FLAGS_FOR_TARGET=$(GM2FLAGS_FOR_TARGET)" \
 	"LD_FOR_TARGET=$(LD_FOR_TARGET)" \
 	"LIPO_FOR_TARGET=$(LIPO_FOR_TARGET)" \
 	"LDFLAGS_FOR_TARGET=$(LDFLAGS_FOR_TARGET)" \
@@ -891,6 +903,7 @@
 	'GFORTRAN=$(GFORTRAN)' \
 	'GOC=$(GOC)' \
 	'GDC=$(GDC)' \
+	'GM2=$(GM2)' \
 	'LD=$(LD)' \
 	'LIPO=$(LIPO)' \
 	'NM=$(NM)' \
@@ -951,6 +964,8 @@
 	'GOCFLAGS=$$(GOCFLAGS_FOR_TARGET)' \
 	'GDC=$$(GDC_FOR_TARGET) $$(XGCC_FLAGS_FOR_TARGET) $$(TFLAGS)' \
 	'GDCFLAGS=$$(GDCFLAGS_FOR_TARGET)' \
+	'GM2=$$(GM2_FOR_TARGET) $$(XGCC_FLAGS_FOR_TARGET) $$(TFLAGS)' \
+	'GM2FLAGS=$$(GM2FLAGS_FOR_TARGET)' \
 	'LD=$(COMPILER_LD_FOR_TARGET)' \
 	'LDFLAGS=$$(LDFLAGS_FOR_TARGET)' \
 	'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
@@ -1060,6 +1075,7 @@
     maybe-configure-target-zlib \
     maybe-configure-target-rda \
     maybe-configure-target-libada \
+    maybe-configure-target-libgm2 \
     maybe-configure-target-libgomp \
     maybe-configure-target-libitm \
     maybe-configure-target-libatomic
@@ -1223,6 +1239,7 @@
 all-target: maybe-all-target-zlib
 all-target: maybe-all-target-rda
 all-target: maybe-all-target-libada
+all-target: maybe-all-target-libgm2
 @if target-libgomp-no-bootstrap
 all-target: maybe-all-target-libgomp
 @endif target-libgomp-no-bootstrap
@@ -1315,6 +1332,7 @@
 info-target: maybe-info-target-zlib
 info-target: maybe-info-target-rda
 info-target: maybe-info-target-libada
+info-target: maybe-info-target-libgm2
 info-target: maybe-info-target-libgomp
 info-target: maybe-info-target-libitm
 info-target: maybe-info-target-libatomic
@@ -1400,6 +1418,7 @@
 dvi-target: maybe-dvi-target-zlib
 dvi-target: maybe-dvi-target-rda
 dvi-target: maybe-dvi-target-libada
+dvi-target: maybe-dvi-target-libgm2
 dvi-target: maybe-dvi-target-libgomp
 dvi-target: maybe-dvi-target-libitm
 dvi-target: maybe-dvi-target-libatomic
@@ -1485,6 +1504,7 @@
 pdf-target: maybe-pdf-target-zlib
 pdf-target: maybe-pdf-target-rda
 pdf-target: maybe-pdf-target-libada
+pdf-target: maybe-pdf-target-libgm2
 pdf-target: maybe-pdf-target-libgomp
 pdf-target: maybe-pdf-target-libitm
 pdf-target: maybe-pdf-target-libatomic
@@ -1570,6 +1590,7 @@
 html-target: maybe-html-target-zlib
 html-target: maybe-html-target-rda
 html-target: maybe-html-target-libada
+html-target: maybe-html-target-libgm2
 html-target: maybe-html-target-libgomp
 html-target: maybe-html-target-libitm
 html-target: maybe-html-target-libatomic
@@ -1655,6 +1676,7 @@
 TAGS-target: maybe-TAGS-target-zlib
 TAGS-target: maybe-TAGS-target-rda
 TAGS-target: maybe-TAGS-target-libada
+TAGS-target: maybe-TAGS-target-libgm2
 TAGS-target: maybe-TAGS-target-libgomp
 TAGS-target: maybe-TAGS-target-libitm
 TAGS-target: maybe-TAGS-target-libatomic
@@ -1740,6 +1762,7 @@
 install-info-target: maybe-install-info-target-zlib
 install-info-target: maybe-install-info-target-rda
 install-info-target: maybe-install-info-target-libada
+install-info-target: maybe-install-info-target-libgm2
 install-info-target: maybe-install-info-target-libgomp
 install-info-target: maybe-install-info-target-libitm
 install-info-target: maybe-install-info-target-libatomic
@@ -1825,6 +1848,7 @@
 install-pdf-target: maybe-install-pdf-target-zlib
 install-pdf-target: maybe-install-pdf-target-rda
 install-pdf-target: maybe-install-pdf-target-libada
+install-pdf-target: maybe-install-pdf-target-libgm2
 install-pdf-target: maybe-install-pdf-target-libgomp
 install-pdf-target: maybe-install-pdf-target-libitm
 install-pdf-target: maybe-install-pdf-target-libatomic
@@ -1910,6 +1934,7 @@
 install-html-target: maybe-install-html-target-zlib
 install-html-target: maybe-install-html-target-rda
 install-html-target: maybe-install-html-target-libada
+install-html-target: maybe-install-html-target-libgm2
 install-html-target: maybe-install-html-target-libgomp
 install-html-target: maybe-install-html-target-libitm
 install-html-target: maybe-install-html-target-libatomic
@@ -1995,6 +2020,7 @@
 installcheck-target: maybe-installcheck-target-zlib
 installcheck-target: maybe-installcheck-target-rda
 installcheck-target: maybe-installcheck-target-libada
+installcheck-target: maybe-installcheck-target-libgm2
 installcheck-target: maybe-installcheck-target-libgomp
 installcheck-target: maybe-installcheck-target-libitm
 installcheck-target: maybe-installcheck-target-libatomic
@@ -2080,6 +2106,7 @@
 mostlyclean-target: maybe-mostlyclean-target-zlib
 mostlyclean-target: maybe-mostlyclean-target-rda
 mostlyclean-target: maybe-mostlyclean-target-libada
+mostlyclean-target: maybe-mostlyclean-target-libgm2
 mostlyclean-target: maybe-mostlyclean-target-libgomp
 mostlyclean-target: maybe-mostlyclean-target-libitm
 mostlyclean-target: maybe-mostlyclean-target-libatomic
@@ -2165,6 +2192,7 @@
 clean-target: maybe-clean-target-zlib
 clean-target: maybe-clean-target-rda
 clean-target: maybe-clean-target-libada
+clean-target: maybe-clean-target-libgm2
 clean-target: maybe-clean-target-libgomp
 clean-target: maybe-clean-target-libitm
 clean-target: maybe-clean-target-libatomic
@@ -2250,6 +2278,7 @@
 distclean-target: maybe-distclean-target-zlib
 distclean-target: maybe-distclean-target-rda
 distclean-target: maybe-distclean-target-libada
+distclean-target: maybe-distclean-target-libgm2
 distclean-target: maybe-distclean-target-libgomp
 distclean-target: maybe-distclean-target-libitm
 distclean-target: maybe-distclean-target-libatomic
@@ -2335,6 +2364,7 @@
 maintainer-clean-target: maybe-maintainer-clean-target-zlib
 maintainer-clean-target: maybe-maintainer-clean-target-rda
 maintainer-clean-target: maybe-maintainer-clean-target-libada
+maintainer-clean-target: maybe-maintainer-clean-target-libgm2
 maintainer-clean-target: maybe-maintainer-clean-target-libgomp
 maintainer-clean-target: maybe-maintainer-clean-target-libitm
 maintainer-clean-target: maybe-maintainer-clean-target-libatomic
@@ -2394,7 +2424,7 @@
 clean: do-clean local-clean
 mostlyclean: do-mostlyclean local-clean
 distclean: do-distclean local-clean local-distclean
-maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean 
+maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean
 maintainer-clean: local-distclean
 realclean: maintainer-clean
 
@@ -2476,6 +2506,7 @@
     maybe-check-target-zlib \
     maybe-check-target-rda \
     maybe-check-target-libada \
+    maybe-check-target-libgm2 \
     maybe-check-target-libgomp \
     maybe-check-target-libitm \
     maybe-check-target-libatomic
@@ -2657,6 +2688,7 @@
     maybe-install-target-zlib \
     maybe-install-target-rda \
     maybe-install-target-libada \
+    maybe-install-target-libgm2 \
     maybe-install-target-libgomp \
     maybe-install-target-libitm \
     maybe-install-target-libatomic
@@ -2762,6 +2794,7 @@
     maybe-install-strip-target-zlib \
     maybe-install-strip-target-rda \
     maybe-install-strip-target-libada \
+    maybe-install-strip-target-libgm2 \
     maybe-install-strip-target-libgomp \
     maybe-install-strip-target-libitm \
     maybe-install-strip-target-libatomic
@@ -2785,7 +2818,7 @@
 
 dist:
 	@echo "Building a full distribution of this tree isn't done"
-	@echo "via 'make dist'.  Check out the etc/ subdirectory" 
+	@echo "via 'make dist'.  Check out the etc/ subdirectory"
 
 etags tags: TAGS
 
@@ -50788,6 +50821,464 @@
 
 
 
+.PHONY: configure-target-libgm2 maybe-configure-target-libgm2
+maybe-configure-target-libgm2:
+@if gcc-bootstrap
+configure-target-libgm2: stage_current
+@endif gcc-bootstrap
+@if target-libgm2
+maybe-configure-target-libgm2: configure-target-libgm2
+configure-target-libgm2: 
+	@: $(MAKE); $(unstage)
+	@r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	echo "Checking multilib configuration for libgm2..."; \
+	$(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libgm2; \
+	$(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libgm2/multilib.tmp 2> /dev/null; \
+	if test -r $(TARGET_SUBDIR)/libgm2/multilib.out; then \
+	  if cmp -s $(TARGET_SUBDIR)/libgm2/multilib.tmp $(TARGET_SUBDIR)/libgm2/multilib.out; then \
+	    rm -f $(TARGET_SUBDIR)/libgm2/multilib.tmp; \
+	  else \
+	    rm -f $(TARGET_SUBDIR)/libgm2/Makefile; \
+	    mv $(TARGET_SUBDIR)/libgm2/multilib.tmp $(TARGET_SUBDIR)/libgm2/multilib.out; \
+	  fi; \
+	else \
+	  mv $(TARGET_SUBDIR)/libgm2/multilib.tmp $(TARGET_SUBDIR)/libgm2/multilib.out; \
+	fi; \
+	test ! -f $(TARGET_SUBDIR)/libgm2/Makefile || exit 0; \
+	$(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libgm2; \
+	$(NORMAL_TARGET_EXPORTS)  \
+	echo Configuring in $(TARGET_SUBDIR)/libgm2; \
+	cd "$(TARGET_SUBDIR)/libgm2" || exit 1; \
+	case $(srcdir) in \
+	  /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+	  *) topdir=`echo $(TARGET_SUBDIR)/libgm2/ | \
+		sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+	esac; \
+	module_srcdir=libgm2; \
+	rm -f no-such-file || : ; \
+	CONFIG_SITE=no-such-file $(SHELL) \
+	  $$s/$$module_srcdir/configure \
+	  --srcdir=$${topdir}/$$module_srcdir \
+	  $(TARGET_CONFIGARGS) --build=${build_alias} --host=${target_alias} \
+	  --target=${target_alias}  \
+	  || exit 1
+@endif target-libgm2
+
+
+
+
+
+.PHONY: all-target-libgm2 maybe-all-target-libgm2
+maybe-all-target-libgm2:
+@if gcc-bootstrap
+all-target-libgm2: stage_current
+@endif gcc-bootstrap
+@if target-libgm2
+TARGET-target-libgm2=all
+maybe-all-target-libgm2: all-target-libgm2
+all-target-libgm2: configure-target-libgm2
+	@: $(MAKE); $(unstage)
+	@r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(NORMAL_TARGET_EXPORTS)  \
+	(cd $(TARGET_SUBDIR)/libgm2 && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)   \
+		$(TARGET-target-libgm2))
+@endif target-libgm2
+
+
+
+
+
+.PHONY: check-target-libgm2 maybe-check-target-libgm2
+maybe-check-target-libgm2:
+@if target-libgm2
+maybe-check-target-libgm2: check-target-libgm2
+
+check-target-libgm2:
+	@: $(MAKE); $(unstage)
+	@r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(NORMAL_TARGET_EXPORTS) \
+	(cd $(TARGET_SUBDIR)/libgm2 && \
+	  $(MAKE) $(TARGET_FLAGS_TO_PASS)   check)
+
+@endif target-libgm2
+
+.PHONY: install-target-libgm2 maybe-install-target-libgm2
+maybe-install-target-libgm2:
+@if target-libgm2
+maybe-install-target-libgm2: install-target-libgm2
+
+install-target-libgm2: installdirs
+	@: $(MAKE); $(unstage)
+	@r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(NORMAL_TARGET_EXPORTS) \
+	(cd $(TARGET_SUBDIR)/libgm2 && \
+	  $(MAKE) $(TARGET_FLAGS_TO_PASS)  install)
+
+@endif target-libgm2
+
+.PHONY: install-strip-target-libgm2 maybe-install-strip-target-libgm2
+maybe-install-strip-target-libgm2:
+@if target-libgm2
+maybe-install-strip-target-libgm2: install-strip-target-libgm2
+
+install-strip-target-libgm2: installdirs
+	@: $(MAKE); $(unstage)
+	@r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(NORMAL_TARGET_EXPORTS) \
+	(cd $(TARGET_SUBDIR)/libgm2 && \
+	  $(MAKE) $(TARGET_FLAGS_TO_PASS)  install-strip)
+
+@endif target-libgm2
+
+# Other targets (info, dvi, pdf, etc.)
+
+.PHONY: maybe-info-target-libgm2 info-target-libgm2
+maybe-info-target-libgm2:
+@if target-libgm2
+maybe-info-target-libgm2: info-target-libgm2
+
+info-target-libgm2: \
+    configure-target-libgm2 
+	@: $(MAKE); $(unstage)
+	@[ -f $(TARGET_SUBDIR)/libgm2/Makefile ] || exit 0; \
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(NORMAL_TARGET_EXPORTS) \
+	echo "Doing info in $(TARGET_SUBDIR)/libgm2"; \
+	for flag in $(EXTRA_TARGET_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	(cd $(TARGET_SUBDIR)/libgm2 && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+	           info) \
+	  || exit 1
+
+@endif target-libgm2
+
+.PHONY: maybe-dvi-target-libgm2 dvi-target-libgm2
+maybe-dvi-target-libgm2:
+@if target-libgm2
+maybe-dvi-target-libgm2: dvi-target-libgm2
+
+dvi-target-libgm2: \
+    configure-target-libgm2 
+	@: $(MAKE); $(unstage)
+	@[ -f $(TARGET_SUBDIR)/libgm2/Makefile ] || exit 0; \
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(NORMAL_TARGET_EXPORTS) \
+	echo "Doing dvi in $(TARGET_SUBDIR)/libgm2"; \
+	for flag in $(EXTRA_TARGET_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	(cd $(TARGET_SUBDIR)/libgm2 && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+	           dvi) \
+	  || exit 1
+
+@endif target-libgm2
+
+.PHONY: maybe-pdf-target-libgm2 pdf-target-libgm2
+maybe-pdf-target-libgm2:
+@if target-libgm2
+maybe-pdf-target-libgm2: pdf-target-libgm2
+
+pdf-target-libgm2: \
+    configure-target-libgm2 
+	@: $(MAKE); $(unstage)
+	@[ -f $(TARGET_SUBDIR)/libgm2/Makefile ] || exit 0; \
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(NORMAL_TARGET_EXPORTS) \
+	echo "Doing pdf in $(TARGET_SUBDIR)/libgm2"; \
+	for flag in $(EXTRA_TARGET_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	(cd $(TARGET_SUBDIR)/libgm2 && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+	           pdf) \
+	  || exit 1
+
+@endif target-libgm2
+
+.PHONY: maybe-html-target-libgm2 html-target-libgm2
+maybe-html-target-libgm2:
+@if target-libgm2
+maybe-html-target-libgm2: html-target-libgm2
+
+html-target-libgm2: \
+    configure-target-libgm2 
+	@: $(MAKE); $(unstage)
+	@[ -f $(TARGET_SUBDIR)/libgm2/Makefile ] || exit 0; \
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(NORMAL_TARGET_EXPORTS) \
+	echo "Doing html in $(TARGET_SUBDIR)/libgm2"; \
+	for flag in $(EXTRA_TARGET_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	(cd $(TARGET_SUBDIR)/libgm2 && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+	           html) \
+	  || exit 1
+
+@endif target-libgm2
+
+.PHONY: maybe-TAGS-target-libgm2 TAGS-target-libgm2
+maybe-TAGS-target-libgm2:
+@if target-libgm2
+maybe-TAGS-target-libgm2: TAGS-target-libgm2
+
+TAGS-target-libgm2: \
+    configure-target-libgm2 
+	@: $(MAKE); $(unstage)
+	@[ -f $(TARGET_SUBDIR)/libgm2/Makefile ] || exit 0; \
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(NORMAL_TARGET_EXPORTS) \
+	echo "Doing TAGS in $(TARGET_SUBDIR)/libgm2"; \
+	for flag in $(EXTRA_TARGET_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	(cd $(TARGET_SUBDIR)/libgm2 && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+	           TAGS) \
+	  || exit 1
+
+@endif target-libgm2
+
+.PHONY: maybe-install-info-target-libgm2 install-info-target-libgm2
+maybe-install-info-target-libgm2:
+@if target-libgm2
+maybe-install-info-target-libgm2: install-info-target-libgm2
+
+install-info-target-libgm2: \
+    configure-target-libgm2 \
+    info-target-libgm2 
+	@: $(MAKE); $(unstage)
+	@[ -f $(TARGET_SUBDIR)/libgm2/Makefile ] || exit 0; \
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(NORMAL_TARGET_EXPORTS) \
+	echo "Doing install-info in $(TARGET_SUBDIR)/libgm2"; \
+	for flag in $(EXTRA_TARGET_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	(cd $(TARGET_SUBDIR)/libgm2 && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+	           install-info) \
+	  || exit 1
+
+@endif target-libgm2
+
+.PHONY: maybe-install-pdf-target-libgm2 install-pdf-target-libgm2
+maybe-install-pdf-target-libgm2:
+@if target-libgm2
+maybe-install-pdf-target-libgm2: install-pdf-target-libgm2
+
+install-pdf-target-libgm2: \
+    configure-target-libgm2 \
+    pdf-target-libgm2 
+	@: $(MAKE); $(unstage)
+	@[ -f $(TARGET_SUBDIR)/libgm2/Makefile ] || exit 0; \
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(NORMAL_TARGET_EXPORTS) \
+	echo "Doing install-pdf in $(TARGET_SUBDIR)/libgm2"; \
+	for flag in $(EXTRA_TARGET_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	(cd $(TARGET_SUBDIR)/libgm2 && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+	           install-pdf) \
+	  || exit 1
+
+@endif target-libgm2
+
+.PHONY: maybe-install-html-target-libgm2 install-html-target-libgm2
+maybe-install-html-target-libgm2:
+@if target-libgm2
+maybe-install-html-target-libgm2: install-html-target-libgm2
+
+install-html-target-libgm2: \
+    configure-target-libgm2 \
+    html-target-libgm2 
+	@: $(MAKE); $(unstage)
+	@[ -f $(TARGET_SUBDIR)/libgm2/Makefile ] || exit 0; \
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(NORMAL_TARGET_EXPORTS) \
+	echo "Doing install-html in $(TARGET_SUBDIR)/libgm2"; \
+	for flag in $(EXTRA_TARGET_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	(cd $(TARGET_SUBDIR)/libgm2 && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+	           install-html) \
+	  || exit 1
+
+@endif target-libgm2
+
+.PHONY: maybe-installcheck-target-libgm2 installcheck-target-libgm2
+maybe-installcheck-target-libgm2:
+@if target-libgm2
+maybe-installcheck-target-libgm2: installcheck-target-libgm2
+
+installcheck-target-libgm2: \
+    configure-target-libgm2 
+	@: $(MAKE); $(unstage)
+	@[ -f $(TARGET_SUBDIR)/libgm2/Makefile ] || exit 0; \
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(NORMAL_TARGET_EXPORTS) \
+	echo "Doing installcheck in $(TARGET_SUBDIR)/libgm2"; \
+	for flag in $(EXTRA_TARGET_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	(cd $(TARGET_SUBDIR)/libgm2 && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+	           installcheck) \
+	  || exit 1
+
+@endif target-libgm2
+
+.PHONY: maybe-mostlyclean-target-libgm2 mostlyclean-target-libgm2
+maybe-mostlyclean-target-libgm2:
+@if target-libgm2
+maybe-mostlyclean-target-libgm2: mostlyclean-target-libgm2
+
+mostlyclean-target-libgm2: 
+	@: $(MAKE); $(unstage)
+	@[ -f $(TARGET_SUBDIR)/libgm2/Makefile ] || exit 0; \
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(NORMAL_TARGET_EXPORTS) \
+	echo "Doing mostlyclean in $(TARGET_SUBDIR)/libgm2"; \
+	for flag in $(EXTRA_TARGET_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	(cd $(TARGET_SUBDIR)/libgm2 && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+	           mostlyclean) \
+	  || exit 1
+
+@endif target-libgm2
+
+.PHONY: maybe-clean-target-libgm2 clean-target-libgm2
+maybe-clean-target-libgm2:
+@if target-libgm2
+maybe-clean-target-libgm2: clean-target-libgm2
+
+clean-target-libgm2: 
+	@: $(MAKE); $(unstage)
+	@[ -f $(TARGET_SUBDIR)/libgm2/Makefile ] || exit 0; \
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(NORMAL_TARGET_EXPORTS) \
+	echo "Doing clean in $(TARGET_SUBDIR)/libgm2"; \
+	for flag in $(EXTRA_TARGET_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	(cd $(TARGET_SUBDIR)/libgm2 && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+	           clean) \
+	  || exit 1
+
+@endif target-libgm2
+
+.PHONY: maybe-distclean-target-libgm2 distclean-target-libgm2
+maybe-distclean-target-libgm2:
+@if target-libgm2
+maybe-distclean-target-libgm2: distclean-target-libgm2
+
+distclean-target-libgm2: 
+	@: $(MAKE); $(unstage)
+	@[ -f $(TARGET_SUBDIR)/libgm2/Makefile ] || exit 0; \
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(NORMAL_TARGET_EXPORTS) \
+	echo "Doing distclean in $(TARGET_SUBDIR)/libgm2"; \
+	for flag in $(EXTRA_TARGET_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	(cd $(TARGET_SUBDIR)/libgm2 && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+	           distclean) \
+	  || exit 1
+
+@endif target-libgm2
+
+.PHONY: maybe-maintainer-clean-target-libgm2 maintainer-clean-target-libgm2
+maybe-maintainer-clean-target-libgm2:
+@if target-libgm2
+maybe-maintainer-clean-target-libgm2: maintainer-clean-target-libgm2
+
+maintainer-clean-target-libgm2: 
+	@: $(MAKE); $(unstage)
+	@[ -f $(TARGET_SUBDIR)/libgm2/Makefile ] || exit 0; \
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(NORMAL_TARGET_EXPORTS) \
+	echo "Doing maintainer-clean in $(TARGET_SUBDIR)/libgm2"; \
+	for flag in $(EXTRA_TARGET_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	(cd $(TARGET_SUBDIR)/libgm2 && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+	           maintainer-clean) \
+	  || exit 1
+
+@endif target-libgm2
+
+
+
+
+
 .PHONY: configure-target-libgomp maybe-configure-target-libgomp
 maybe-configure-target-libgomp:
 @if gcc-bootstrap
@@ -53039,6 +53530,14 @@
 	(cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) check-go);
 check-go: check-gcc-go check-target-libgo check-gotools
 
+.PHONY: check-gcc-gm2 check-gm2
+check-gcc-gm2:
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(HOST_EXPORTS) \
+	(cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) check-gm2);
+check-gm2: check-gcc-gm2
+
 .PHONY: check-gcc-brig check-brig
 check-gcc-brig:
 	r=`${PWD_COMMAND}`; export r; \
@@ -53114,7 +53613,7 @@
 # reliable.
 
 # 'touch' doesn't work right on some platforms.
-STAMP = echo timestamp > 
+STAMP = echo timestamp >
 
 # We only want to compare .o files, so set this!
 objext = .o
@@ -56255,6 +56754,7 @@
 configure-target-zlib: stage_last
 configure-target-rda: stage_last
 configure-target-libada: stage_last
+configure-target-libgm2: stage_last
 configure-stage1-target-libgomp: maybe-all-stage1-gcc
 configure-stage2-target-libgomp: maybe-all-stage2-gcc
 configure-stage3-target-libgomp: maybe-all-stage3-gcc
@@ -56290,6 +56790,7 @@
 configure-target-zlib: maybe-all-gcc
 configure-target-rda: maybe-all-gcc
 configure-target-libada: maybe-all-gcc
+configure-target-libgm2: maybe-all-gcc
 configure-target-libgomp: maybe-all-gcc
 configure-target-libitm: maybe-all-gcc
 configure-target-libatomic: maybe-all-gcc
@@ -57459,6 +57960,7 @@
 configure-target-zlib: maybe-all-target-libgcc
 configure-target-rda: maybe-all-target-libgcc
 configure-target-libada: maybe-all-target-libgcc
+configure-target-libgm2: maybe-all-target-libgcc
 configure-target-libgomp: maybe-all-target-libgcc
 configure-target-libitm: maybe-all-target-libgcc
 configure-target-libatomic: maybe-all-target-libgcc
@@ -57506,6 +58008,8 @@
 
 configure-target-libada: maybe-all-target-newlib maybe-all-target-libgloss
 
+configure-target-libgm2: maybe-all-target-newlib maybe-all-target-libgloss
+
 configure-target-libgomp: maybe-all-target-newlib maybe-all-target-libgloss
 
 configure-target-libitm: maybe-all-target-newlib maybe-all-target-libgloss
@@ -57522,7 +58026,7 @@
 install-gdb: $(INSTALL_GDB_TK)
 
 # Serialization dependencies.  Host configures don't work well in parallel to
-# each other, due to contention over config.cache.  Target configures and 
+# each other, due to contention over config.cache.  Target configures and
 # build configures are similar.
 @serialization_dependencies@
 
--- a/src/Makefile.tpl
+++ b/src/Makefile.tpl
@@ -13,12 +13,12 @@
 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 3 of the License, or
 # (at your option) any later version.
-# 
+#
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
-# 
+#
 # You should have received a copy of the GNU General Public License
 # along with this program; see the file COPYING3.  If not see
 # <http://www.gnu.org/licenses/>.
@@ -161,6 +161,7 @@
 	GOCFLAGS="$(GOCFLAGS_FOR_BUILD)"; export GOCFLAGS; \
 	GDC="$(GDC_FOR_BUILD)"; export GDC; \
 	GDCFLAGS="$(GDCFLAGS_FOR_BUILD)"; export GDCFLAGS; \
+	GM2="$(GM2_FOR_BUILD)"; export GM2; \
 	DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \
 	LD="$(LD_FOR_BUILD)"; export LD; \
 	LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \
@@ -198,6 +199,7 @@
 	GFORTRAN="$(GFORTRAN)"; export GFORTRAN; \
 	GOC="$(GOC)"; export GOC; \
 	GDC="$(GDC)"; export GDC; \
+	GM2="$(GM2)"; export GM2; \
 	AR="$(AR)"; export AR; \
 	AS="$(AS)"; export AS; \
 	CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \
@@ -295,6 +297,7 @@
 	GFORTRAN="$(GFORTRAN_FOR_TARGET) $(XGCC_FLAGS_FOR_TARGET) $$TFLAGS"; export GFORTRAN; \
 	GOC="$(GOC_FOR_TARGET) $(XGCC_FLAGS_FOR_TARGET) $$TFLAGS"; export GOC; \
 	GDC="$(GDC_FOR_TARGET) $(XGCC_FLAGS_FOR_TARGET) $$TFLAGS"; export GDC; \
+	GM2="$(GM2_FOR_TARGET) $(XGCC_FLAGS_FOR_TARGET) $$TFLAGS"; export GM2; \
 	DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
 	LD="$(COMPILER_LD_FOR_TARGET)"; export LD; \
 	LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
@@ -361,6 +364,7 @@
 GFORTRAN_FOR_BUILD = @GFORTRAN_FOR_BUILD@
 GOC_FOR_BUILD = @GOC_FOR_BUILD@
 GDC_FOR_BUILD = @GDC_FOR_BUILD@
+GM2_FOR_BUILD = @GM2_FOR_BUILD@
 LDFLAGS_FOR_BUILD = @LDFLAGS_FOR_BUILD@
 LD_FOR_BUILD = @LD_FOR_BUILD@
 NM_FOR_BUILD = @NM_FOR_BUILD@
@@ -430,6 +434,7 @@
 LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
 GOCFLAGS = $(CFLAGS)
 GDCFLAGS = $(CFLAGS)
+GM2FLAGS = $(CFLAGS)
 
 CREATE_GCOV = create_gcov
 
@@ -517,6 +522,7 @@
 GFORTRAN_FOR_TARGET=$(STAGE_CC_WRAPPER) @GFORTRAN_FOR_TARGET@
 GOC_FOR_TARGET=$(STAGE_CC_WRAPPER) @GOC_FOR_TARGET@
 GDC_FOR_TARGET=$(STAGE_CC_WRAPPER) @GDC_FOR_TARGET@
+GM2_FOR_TARGET=$(STAGE_CC_WRAPPER) @GM2_FOR_TARGET@
 DLLTOOL_FOR_TARGET=@DLLTOOL_FOR_TARGET@
 LD_FOR_TARGET=@LD_FOR_TARGET@
 
@@ -646,6 +652,7 @@
 	'GFORTRAN=$(GFORTRAN)' \
 	'GOC=$(GOC)' \
 	'GDC=$(GDC)' \
+	'GM2=$(GM2)' \
 	'LD=$(LD)' \
 	'LIPO=$(LIPO)' \
 	'NM=$(NM)' \
@@ -706,6 +713,8 @@
 	'GOCFLAGS=$$(GOCFLAGS_FOR_TARGET)' \
 	'GDC=$$(GDC_FOR_TARGET) $$(XGCC_FLAGS_FOR_TARGET) $$(TFLAGS)' \
 	'GDCFLAGS=$$(GDCFLAGS_FOR_TARGET)' \
+	'GM2=$$(GM2_FOR_TARGET) $$(XGCC_FLAGS_FOR_TARGET) $$(TFLAGS)' \
+	'GM2FLAGS=$$(GM2FLAGS_FOR_TARGET)' \
 	'LD=$(COMPILER_LD_FOR_TARGET)' \
 	'LDFLAGS=$$(LDFLAGS_FOR_TARGET)' \
 	'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
@@ -874,7 +883,7 @@
 clean: do-clean local-clean
 mostlyclean: do-mostlyclean local-clean
 distclean: do-distclean local-clean local-distclean
-maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean 
+maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean
 maintainer-clean: local-distclean
 realclean: maintainer-clean
 
@@ -1031,7 +1040,7 @@
 
 dist:
 	@echo "Building a full distribution of this tree isn't done"
-	@echo "via 'make dist'.  Check out the etc/ subdirectory" 
+	@echo "via 'make dist'.  Check out the etc/ subdirectory"
 
 etags tags: TAGS
 
@@ -1404,9 +1413,9 @@
 ENDIF raw_cxx +]
 	(cd $(TARGET_SUBDIR)/[+module+] && \
 	  $(MAKE) $(TARGET_FLAGS_TO_PASS) [+
-	    IF raw_cxx 
-	      +] 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' [+ 
-	    ENDIF raw_cxx 
+	    IF raw_cxx
+	      +] 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' [+
+	    ENDIF raw_cxx
 	  +] [+extra_make_flags+] check)
 [+ ENDIF no_check +]
 @endif target-[+module+]
@@ -1599,7 +1608,7 @@
 # reliable.
 
 # 'touch' doesn't work right on some platforms.
-STAMP = echo timestamp > 
+STAMP = echo timestamp >
 
 # We only want to compare .o files, so set this!
 objext = .o
@@ -1981,7 +1990,7 @@
 install-gdb: $(INSTALL_GDB_TK)
 
 # Serialization dependencies.  Host configures don't work well in parallel to
-# each other, due to contention over config.cache.  Target configures and 
+# each other, due to contention over config.cache.  Target configures and
 # build configures are similar.
 @serialization_dependencies@
 
--- a/src/gcc/brig/brigspec.c
+++ b/src/gcc/brig/brigspec.c
@@ -134,3 +134,9 @@
 /* Number of extra output files that lang_specific_pre_link may generate.  */
 
 int lang_specific_extra_outfiles = 0; /* Not used for Brig.  */
+
+/* lang_register_spec_functions.  Not used for Brig.  */
+void
+lang_register_spec_functions (void)
+{
+}
--- a/src/gcc/d/d-spec.cc
+++ b/src/gcc/d/d-spec.cc
@@ -514,3 +514,8 @@
 
 int lang_specific_extra_outfiles = 0;  /* Not used for D.  */
 
+/* lang_register_spec_functions.  Not used for D.  */
+void
+lang_register_spec_functions (void)
+{
+}
--- a/src/gcc/fortran/gfortranspec.c
+++ b/src/gcc/fortran/gfortranspec.c
@@ -200,7 +200,7 @@
   int need_math = (MATH_LIBRARY[0] != '\0');
 
   /* Whether we should link a static libgfortran.  */
-  int static_lib = 0; 
+  int static_lib = 0;
 
   /* Whether we need to link statically.  */
   int static_linking = 0;
@@ -448,3 +448,9 @@
 
 /* Number of extra output files that lang_specific_pre_link may generate.  */
 int lang_specific_extra_outfiles = 0;	/* Not used for F77.  */
+
+/* lang_register_spec_functions.  Not used for F77.  */
+void
+lang_register_spec_functions (void)
+{
+}
--- a/src/gcc/go/gospec.c
+++ b/src/gcc/go/gospec.c
@@ -125,7 +125,7 @@
 #endif
 
   /* The first input file with an extension of .go.  */
-  const char *first_go_file = NULL;  
+  const char *first_go_file = NULL;
 
   argc = *in_decoded_options_count;
   decoded_options = *in_decoded_options;
@@ -440,3 +440,9 @@
 
 /* Number of extra output files that lang_specific_pre_link may generate.  */
 int lang_specific_extra_outfiles = 0;  /* Not used for Go.  */
+
+/* lang_register_spec_functions.  Not used for Go.  */
+void
+lang_register_spec_functions (void)
+{
+}