Source: dladm
Section: admin
Priority: optional
Maintainer: Igor Pashev <pashev.igor@gmail.com>
Build-Depends:
 illumos-source-4.3,
 dh-illumos,
 dh-smf,
 gcc-multilib [illumos-amd64],
 libncurses5-dev  , lib32ncurses5-dev [illumos-amd64]  , 
 libdevinfo1-dev  , lib32devinfo1-dev [illumos-amd64]  , 
 libexacct1-dev   , lib32exacct1-dev [illumos-amd64]   , 
 libinetutil1-dev , lib32inetutil1-dev [illumos-amd64] , 
 libkstat1-dev    , lib32kstat1-dev [illumos-amd64]    , 
 libnvpair1-dev   , lib32nvpair1-dev [illumos-amd64]   , 
 libpool1-dev     , lib32pool1-dev [illumos-amd64]     , 
 librcm1-dev      , lib32rcm1-dev [illumos-amd64]      , 
 libscf1-dev      , lib32scf1-dev [illumos-amd64]      , 
 libsunavl-dev,
 librstp1-dev,
 quilt,
 uts-dev (>= 4.3+4),
 symlinks,
Standards-Version: 3.9.3
Homepage: https://www.illumos.org

Package: dladm
Section: admin
Priority: required
Architecture: illumos-any
Replaces: illumos-net-tools (<< 2.10)
Depends: ${shlibs:Depends}, ${misc:Depends}
Description: administer data links
 The dladm command is used to administer data-links. A  datalink  is
 represented  in  the system as a STREAMS DLPI (v2) interface which can be
 plumbed under protocol stacks such as TCP/IP.  Each  data-link  relies  on
 either a single network device or an aggregation of devices to send  packets
 to  or receive packets from a network.
 .
 This package also includes flowadm, flowstat, and dlstat utilities.
 .
 The flowadm command is used to create, modify, remove, and show networking
 bandwidth and associated resources for a type of traffic on a particular link.
 .
 The flowstat command reports run time statistics about user defined flows.
 .
 The dlstat command report data links statistics.

Package: libdladm1
Section: libs
Priority: optional
Multi-Arch: same
Pre-Depends: ${misc:Pre-Depends}
Architecture: illumos-any
Depends: ${shlibs:Depends}, ${misc:Depends}
Description: data-link administration library
 This package contains libdladm shared library.

Package: libdladm1-dev
Section: libdevel
Priority: optional
Architecture: illumos-any
Provides: libdladm-dev
Depends: libdladm1 (= ${binary:Version}), ${misc:Depends}, libc1-dev,
 librstp1-dev
Description: data-link administration library (development files)
 This package contains the header files and symlinks needed
 to compile applications that use libdladm.

Package: lib32dladm1
Section: libs
Priority: optional
Architecture: illumos-amd64
Depends: ${shlibs:Depends}, ${misc:Depends}
Description: data-link administration library (32 bit)
 This package contains libdladm shared library.
 .
 This is a 32-bit version of the library.

Package: lib32dladm1-dev
Section: libdevel
Priority: optional
Architecture: illumos-amd64
Provides: lib32dladm-dev
Depends: lib32dladm1 (= ${binary:Version}), libdladm1-dev (= ${binary:Version}),
 ${misc:Depends}
Description: data-link administration library (32-bit development files)
 This package contains files needed to compile
 32-bit applications that use libdladm.
 
Package: libdlpi1
Section: libs
Priority: optional
Multi-Arch: same
Pre-Depends: ${misc:Pre-Depends}
Architecture: illumos-any
Depends: ${shlibs:Depends}, ${misc:Depends}
Description: data link provider interface library
 This package contains libdlpi shared library.
 .
 The libdlpi library provides a programming interface for DLPI applications.
 DLPI is used by applications that need to access the data-link layer directly
 and thus cannot use a higher-layer API such as sockets.

Package: libdlpi1-dev
Section: libdevel
Priority: optional
Architecture: illumos-any
Provides: libdlpi-dev
Depends: libdlpi1 (= ${binary:Version}), ${misc:Depends}, libc1-dev,
Description: data link provider interface library (development files)
 This package contains the header files and symlinks needed
 to compile applications that use libdlpi.
 .
 The libdlpi library provides a programming interface for DLPI applications.
 DLPI is used by applications that need to access the data-link layer directly
 and thus cannot use a higher-layer API such as sockets.

Package: lib32dlpi1
Section: libs
Priority: optional
Architecture: illumos-amd64
Depends: ${shlibs:Depends}, ${misc:Depends}
Description: data link provider interface library (32 bit)
 This package contains libdlpi shared library.
 .
 The libdlpi library provides a programming interface for DLPI applications.
 DLPI is used by applications that need to access the data-link layer directly
 and thus cannot use a higher-layer API such as sockets.
 .
 This is a 32-bit version of the library.

Package: lib32dlpi1-dev
Section: libdevel
Priority: optional
Architecture: illumos-amd64
Provides: lib32dlpi-dev
Depends: lib32dlpi1 (= ${binary:Version}), libdlpi1-dev (= ${binary:Version}),
 ${misc:Depends}
Description: data link provider interface library (32-bit development files)
 This package contains files needed to compile
 32-bit applications that use libdlpi.
 .
 The libdlpi library provides a programming interface for DLPI applications.
 DLPI is used by applications that need to access the data-link layer directly
 and thus cannot use a higher-layer API such as sockets.