diff options
Diffstat (limited to 'doc/texinfo.tex')
| -rw-r--r-- | doc/texinfo.tex | 361 |
1 files changed, 229 insertions, 132 deletions
diff --git a/doc/texinfo.tex b/doc/texinfo.tex index 85b68e7..b5f3141 100644 --- a/doc/texinfo.tex +++ b/doc/texinfo.tex @@ -3,7 +3,7 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2012-03-11.15} +\def\texinfoversion{2012-11-08.11} % % Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, @@ -28,9 +28,9 @@ % % Please try the latest version of texinfo.tex before submitting bug % reports; you can get the latest version from: -% http://www.gnu.org/software/texinfo/ (the Texinfo home page), or -% ftp://tug.org/tex/texinfo.tex -% (and all CTAN mirrors, see http://www.ctan.org). +% http://ftp.gnu.org/gnu/texinfo/ (the Texinfo release area), or +% http://ftpmirror.gnu.org/texinfo/ (same, via a mirror), or +% http://www.gnu.org/software/texinfo/ (the Texinfo home page) % The texinfo.tex in any given distribution could well be out % of date, so if that's what you're using, please check. % @@ -594,7 +594,7 @@ \def\:{\spacefactor=1000 } % @* forces a line break. -\def\*{\hfil\break\hbox{}\ignorespaces} +\def\*{\unskip\hfil\break\hbox{}\ignorespaces} % @/ allows a line break. \let\/=\allowbreak @@ -1117,7 +1117,7 @@ where each line of input produces a line of output.} % #1 is a control sequence in which to do the replacements, % which we \xdef. \def\txiescapepdf#1{% - \ifx\pdfescapestring\relax + \ifx\pdfescapestring\thisisundefined % No primitive available; should we give a warning or log? % Many times it won't matter. \else @@ -1367,9 +1367,8 @@ output) for that.)} \def\skipspaces#1{\def\PP{#1}\def\D{|}% \ifx\PP\D\let\nextsp\relax \else\let\nextsp\skipspaces - \ifx\p\space\else\addtokens{\filename}{\PP}% - \advance\filenamelength by 1 - \fi + \addtokens{\filename}{\PP}% + \advance\filenamelength by 1 \fi \nextsp} \def\getfilename#1{% @@ -1475,9 +1474,6 @@ output) for that.)} \def\ttsl{\setfontstyle{ttsl}} -% Default leading. -\newdimen\textleading \textleading = 13.2pt - % Set the baselineskip to #1, and the lineskip and strut size % correspondingly. There is no deep meaning behind these magic numbers % used as factors; they just match (closely enough) what Knuth defined. @@ -1489,6 +1485,7 @@ output) for that.)} % can get a sort of poor man's double spacing by redefining this. \def\baselinefactor{1} % +\newdimen\textleading \def\setleading#1{% \dimen0 = #1\relax \normalbaselineskip = \baselinefactor\dimen0 @@ -1761,18 +1758,24 @@ end \fi\fi -% Set the font macro #1 to the font named #2, adding on the -% specified font prefix (normally `cm'). +% Set the font macro #1 to the font named \fontprefix#2. % #3 is the font's design size, #4 is a scale factor, #5 is the CMap -% encoding (currently only OT1, OT1IT and OT1TT are allowed, pass -% empty to omit). +% encoding (only OT1, OT1IT and OT1TT are allowed, or empty to omit). +% Example: +% #1 = \textrm +% #2 = \rmshape +% #3 = 10 +% #4 = \mainmagstep +% #5 = OT1 +% \def\setfont#1#2#3#4#5{% \font#1=\fontprefix#2#3 scaled #4 \csname cmap#5\endcsname#1% } % This is what gets called when #5 of \setfont is empty. \let\cmap\gobble -% emacs-page end of cmaps +% +% (end of cmaps) % Use cm as the default font prefix. % To specify the font prefix, you must define \fontprefix @@ -1782,7 +1785,7 @@ end \fi % Support font families that don't use the same naming scheme as CM. \def\rmshape{r} -\def\rmbshape{bx} %where the normal face is bold +\def\rmbshape{bx} % where the normal face is bold \def\bfshape{b} \def\bxshape{bx} \def\ttshape{tt} @@ -1797,8 +1800,7 @@ end \def\scshape{csc} \def\scbshape{csc} -% Definitions for a main text size of 11pt. This is the default in -% Texinfo. +% Definitions for a main text size of 11pt. (The default in Texinfo.) % \def\definetextfontsizexi{% % Text fonts (11.2pt, magstep1). @@ -1923,7 +1925,7 @@ end \textleading = 13.2pt % line spacing for 11pt CM \textfonts % reset the current fonts \rm -} % end of 11pt text font size definitions +} % end of 11pt text font size definitions, \definetextfontsizexi % Definitions to make the main text be 10pt Computer Modern, with @@ -2055,7 +2057,7 @@ end \textleading = 12pt % line spacing for 10pt CM \textfonts % reset the current fonts \rm -} % end of 10pt text font size definitions +} % end of 10pt text font size definitions, \definetextfontsizex % We provide the user-level command @@ -2270,8 +2272,6 @@ end \gdef\markupsetcodequoteleft{\let`\codequoteleft} \gdef\markupsetcodequoteright{\let'\codequoteright} - -\gdef\markupsetnoligaturesquoteleft{\let`\noligaturesquoteleft} } \let\markupsetuplqcode \markupsetcodequoteleft @@ -2280,6 +2280,9 @@ end \let\markupsetuplqexample \markupsetcodequoteleft \let\markupsetuprqexample \markupsetcodequoteright % +\let\markupsetuplqkbd \markupsetcodequoteleft +\let\markupsetuprqkbd \markupsetcodequoteright +% \let\markupsetuplqsamp \markupsetcodequoteleft \let\markupsetuprqsamp \markupsetcodequoteright % @@ -2289,8 +2292,6 @@ end \let\markupsetuplqverbatim \markupsetcodequoteleft \let\markupsetuprqverbatim \markupsetcodequoteright -\let\markupsetuplqkbd \markupsetnoligaturesquoteleft - % Allow an option to not use regular directed right quote/apostrophe % (char 0x27), but instead the undirected quote from cmtt (char 0x0d). % The undirected quote is ugly, so don't make it the default, but it @@ -2380,8 +2381,7 @@ end \aftersmartic } -% like \smartslanted except unconditionally uses \ttsl, and no ic. -% @var is set to this for defun arguments. +% Unconditional use \ttsl, and no ic. @var is set to this for defuns. \def\ttslanted#1{{\ttsl #1}} % @cite is like \smartslanted except unconditionally use \sl. We never want @@ -2446,34 +2446,12 @@ end % @samp. \def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}} -% definition of @key that produces a lozenge. Doesn't adjust to text size. -%\setfont\keyrm\rmshape{8}{1000}{OT1} -%\font\keysy=cmsy9 -%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{% -% \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{% -% \vbox{\hrule\kern-0.4pt -% \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% -% \kern-0.4pt\hrule}% -% \kern-.06em\raise0.4pt\hbox{\angleright}}}} +% @indicateurl is \samp, that is, with quotes. +\let\indicateurl=\samp -% definition of @key with no lozenge. If the current font is already -% monospace, don't change it; that way, we respect @kbdinputstyle. But -% if it isn't monospace, then use \tt. -% -\def\key#1{{\setupmarkupstyle{key}% - \nohyphenation - \ifmonospace\else\tt\fi - #1}\null} - -% ctrl is no longer a Texinfo command. -\def\ctrl #1{{\tt \rawbackslash \hat}#1} - -% @file, @option are the same as @samp. -\let\file=\samp -\let\option=\samp - -% @code is a modification of @t, -% which makes spaces the same size as normal in the surrounding text. +% @code (and similar) prints in typewriter, but with spaces the same +% size as normal in the surrounding text, without hyphenation, etc. +% This is a subroutine for that. \def\tclose#1{% {% % Change normal interword space to be same as for the current font. @@ -2498,7 +2476,7 @@ end % We *must* turn on hyphenation at `-' and `_' in @code. % Otherwise, it is too hard to avoid overfull hboxes % in the Emacs manual, the Library manual, etc. - +% % Unfortunately, TeX uses one parameter (\hyphenchar) to control % both hyphenation at - and hyphenation within words. % We must therefore turn them both off (\tclose does that) @@ -2562,6 +2540,13 @@ end \fi\fi } +% For @command, @env, @file, @option quotes seem unnecessary, +% so use \code rather than \samp. +\let\command=\code +\let\env=\code +\let\file=\code +\let\option=\code + % @uref (abbreviation for `urlref') takes an optional (comma-separated) % second argument specifying the text to display and an optional third % arg as text to display instead of (rather than in addition to) the url @@ -2708,10 +2693,6 @@ end \let\email=\uref \fi -% @kbd is like @code, except that if the argument is just one @key command, -% then @kbd has no effect. -\def\kbd#1{{\setupmarkupstyle{kbd}\def\look{#1}\expandafter\kbdfoo\look??\par}} - % @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), % `example' (@kbd uses ttsl only inside of @example and friends), % or `code' (@kbd uses normal tty font always). @@ -2735,16 +2716,36 @@ end % Default is `distinct'. \kbdinputstyle distinct +% @kbd is like @code, except that if the argument is just one @key command, +% then @kbd has no effect. +\def\kbd#1{{\def\look{#1}\expandafter\kbdsub\look??\par}} + \def\xkey{\key} -\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}% -\ifx\one\xkey\ifx\threex\three \key{#2}% -\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi -\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi} +\def\kbdsub#1#2#3\par{% + \def\one{#1}\def\three{#3}\def\threex{??}% + \ifx\one\xkey\ifx\threex\three \key{#2}% + \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi + \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi +} -% For @indicateurl, @env, @command quotes seem unnecessary, so use \code. -\let\indicateurl=\code -\let\env=\code -\let\command=\code +% definition of @key that produces a lozenge. Doesn't adjust to text size. +%\setfont\keyrm\rmshape{8}{1000}{OT1} +%\font\keysy=cmsy9 +%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{% +% \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{% +% \vbox{\hrule\kern-0.4pt +% \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% +% \kern-0.4pt\hrule}% +% \kern-.06em\raise0.4pt\hbox{\angleright}}}} + +% definition of @key with no lozenge. If the current font is already +% monospace, don't change it; that way, we respect @kbdinputstyle. But +% if it isn't monospace, then use \tt. +% +\def\key#1{{\setupmarkupstyle{key}% + \nohyphenation + \ifmonospace\else\tt\fi + #1}\null} % @clicksequence{File @click{} Open ...} \def\clicksequence#1{\begingroup #1\endgroup} @@ -2852,6 +2853,9 @@ end } } +% ctrl is no longer a Texinfo command, but leave this definition for fun. +\def\ctrl #1{{\tt \rawbackslash \hat}#1} + % @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}. % Ignore unless FMTNAME == tex; then it is like @iftex and @tex, % except specified as a normal braced arg, so no newlines to worry about. @@ -3142,12 +3146,17 @@ end % hopefully nobody will notice/care. \edef\ecsize{\csname\curfontsize ecsize\endcsname}% \edef\nominalsize{\csname\curfontsize nominalsize\endcsname}% - \ifx\curfontstyle\bfstylename - % bold: - \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize + \ifmonospace + % typewriter: + \font\thisecfont = ectt\ecsize \space at \nominalsize \else - % regular: - \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize + \ifx\curfontstyle\bfstylename + % bold: + \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize + \else + % regular: + \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize + \fi \fi \thisecfont } @@ -3260,6 +3269,20 @@ end \finishedtitlepagetrue } +% Settings used for typesetting titles: no hyphenation, no indentation, +% don't worry much about spacing, ragged right. This should be used +% inside a \vbox, and fonts need to be set appropriately first. Because +% it is always used for titles, nothing else, we call \rmisbold. \par +% should be specified before the end of the \vbox, since a vbox is a group. +% +\def\raggedtitlesettings{% + \rmisbold + \hyphenpenalty=10000 + \parindent=0pt + \tolerance=5000 + \ptexraggedright +} + % Macros to be used within @titlepage: \let\subtitlerm=\tenrm @@ -3267,7 +3290,7 @@ end \parseargdef\title{% \checkenv\titlepage - \leftline{\titlefonts\rmisbold #1} + \vbox{\titlefonts \raggedtitlesettings #1\par}% % print a rule at the page bottom also. \finishedtitlepagefalse \vskip4pt \hrule height 4pt width \hsize \vskip4pt @@ -4204,7 +4227,7 @@ end } \def\ifsetfail{\doignore{ifset}} -% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been +% @ifclear VAR ... @end executes the `...' iff VAR has never been % defined with @set, or has been undefined with @clear. % % The `\else' inside the `\doifset' parameter is a trick to reuse the @@ -4215,6 +4238,35 @@ end \def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}} \def\ifclearfail{\doignore{ifclear}} +% @ifcommandisdefined CMD ... @end executes the `...' if CMD (written +% without the @) is in fact defined. We can only feasibly check at the +% TeX level, so something like `mathcode' is going to considered +% defined even though it is not a Texinfo command. +% +\makecond{ifcommanddefined} +\def\ifcommanddefined{\parsearg{\doifcmddefined{\let\next=\ifcmddefinedfail}}} +% +\def\doifcmddefined#1#2{{% + \makevalueexpandable + \let\next=\empty + \expandafter\ifx\csname #2\endcsname\relax + #1% If not defined, \let\next as above. + \fi + \expandafter + }\next +} +\def\ifcmddefinedfail{\doignore{ifcommanddefined}} + +% @ifcommandnotdefined CMD ... handled similar to @ifclear above. +\makecond{ifcommandnotdefined} +\def\ifcommandnotdefined{% + \parsearg{\doifcmddefined{\else \let\next=\ifcmdnotdefinedfail}}} +\def\ifcmdnotdefinedfail{\doignore{ifcommandnotdefined}} + +% Set the `txicommandconditionals' variable, so documents have a way to +% test if the @ifcommand...defined conditionals are available. +\set txicommandconditionals + % @dircategory CATEGORY -- specify a category of the dir file % which this file should belong to. Ignore this in TeX. \let\dircategory=\comment @@ -4451,6 +4503,7 @@ end \definedummyword\guillemetright \definedummyword\guilsinglleft \definedummyword\guilsinglright + \definedummyword\lbracechar \definedummyword\leq \definedummyword\minus \definedummyword\ogonek @@ -4463,6 +4516,7 @@ end \definedummyword\quoteleft \definedummyword\quoteright \definedummyword\quotesinglbase + \definedummyword\rbracechar \definedummyword\result \definedummyword\textdegree % @@ -4514,6 +4568,7 @@ end \definedummyword\t % % Commands that take arguments. + \definedummyword\abbr \definedummyword\acronym \definedummyword\anchor \definedummyword\cite @@ -4525,7 +4580,9 @@ end \definedummyword\emph \definedummyword\env \definedummyword\file + \definedummyword\image \definedummyword\indicateurl + \definedummyword\inforef \definedummyword\kbd \definedummyword\key \definedummyword\math @@ -4572,7 +4629,10 @@ end % content at all. So for index sorting, we map @{ and @} to strings % starting with |, since that ASCII character is between ASCII { and }. \def\{{|a}% + \def\lbracechar{|a}% + % \def\}{|b}% + \def\rbracechar{|b}% % % Non-English letters. \def\AA{AA}% @@ -5533,14 +5593,6 @@ end % Define @majorheading, @heading and @subheading -% NOTE on use of \vbox for chapter headings, section headings, and such: -% 1) We use \vbox rather than the earlier \line to permit -% overlong headings to fold. -% 2) \hyphenpenalty is set to 10000 because hyphenation in a -% heading is obnoxious; this forbids it. -% 3) Likewise, headings look best if no \parindent is used, and -% if justification is not attempted. Hence \raggedright. - \def\majorheading{% {\advance\chapheadingskip by 10pt \chapbreak }% \parsearg\chapheadingzzz @@ -5548,10 +5600,8 @@ end \def\chapheading{\chapbreak \parsearg\chapheadingzzz} \def\chapheadingzzz#1{% - {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt\ptexraggedright - \rmisbold #1\hfill}}% - \bigskip \par\penalty 200\relax + \vbox{\chapfonts \raggedtitlesettings #1\par}% + \nobreak\bigskip \nobreak \suppressfirstparagraphindent } @@ -5710,8 +5760,7 @@ end % % Typeset the actual heading. \nobreak % Avoid page breaks at the interline glue. - \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright - \hangindent=\wd0 \centerparametersmaybe + \vbox{\raggedtitlesettings \hangindent=\wd0 \centerparametersmaybe \unhbox0 #1\par}% }% \nobreak\bigskip % no page break after a chapter title @@ -5733,18 +5782,18 @@ end \def\setchapterstyle #1 {\csname CHAPF#1\endcsname} % \def\unnchfopen #1{% -\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt\ptexraggedright - \rmisbold #1\hfill}}\bigskip \par\nobreak + \chapoddpage + \vbox{\chapfonts \raggedtitlesettings #1\par}% + \nobreak\bigskip\nobreak } \def\chfopen #1#2{\chapoddpage {\chapfonts \vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}% \par\penalty 5000 % } \def\centerchfopen #1{% -\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt - \hfill {\rmisbold #1}\hfill}}\bigskip \par\nobreak + \chapoddpage + \vbox{\chapfonts \raggedtitlesettings \hfill #1\hfill}% + \nobreak\bigskip \nobreak } \def\CHAPFopen{% \global\let\chapmacro=\chfopen @@ -6510,16 +6559,9 @@ end \makedispenvdef{quotation}{\quotationstart} % \def\quotationstart{% - {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip - \parindent=0pt - % - % @cartouche defines \nonarrowing to inhibit narrowing at next level down. + \indentedblockstart % same as \indentedblock, but increase right margin too. \ifx\nonarrowing\relax - \advance\leftskip by \lispnarrowing \advance\rightskip by \lispnarrowing - \exdentamount = \lispnarrowing - \else - \let\nonarrowing = \relax \fi \parsearg\quotationlabel } @@ -6545,6 +6587,32 @@ end \fi } +% @indentedblock is like @quotation, but indents only on the left and +% has no optional argument. +% +\makedispenvdef{indentedblock}{\indentedblockstart} +% +\def\indentedblockstart{% + {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip + \parindent=0pt + % + % @cartouche defines \nonarrowing to inhibit narrowing at next level down. + \ifx\nonarrowing\relax + \advance\leftskip by \lispnarrowing + \exdentamount = \lispnarrowing + \else + \let\nonarrowing = \relax + \fi +} + +% Keep a nonzero parskip for the environment, since we're doing normal filling. +% +\def\Eindentedblock{% + \par + {\parskip=0pt \afterenvbreak}% +} +\def\Esmallindentedblock{\Eindentedblock} + % LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>} % If we want to allow any <char> as delimiter, @@ -7023,7 +7091,10 @@ end \df \sl \hyphenchar\font=0 % % On the other hand, if an argument has two dashes (for instance), we - % want a way to get ttsl. Let's try @var for that. + % want a way to get ttsl. We used to recommend @var for that, so + % leave the code in, but it's strange for @var to lead to typewriter. + % Nowadays we recommend @code, since the difference between a ttsl hyphen + % and a tt hyphen is pretty tiny. @code also disables ?` !`. \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}% #1% \sl\hyphenchar\font=45 @@ -7807,7 +7878,7 @@ end \fi\fi } - +% % @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is % the node name, #2 the name of the Info cross-reference, #3 the printed % node name, #4 the name of the Info file, #5 the name of the printed @@ -7817,16 +7888,21 @@ end \def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]} \def\ref#1{\xrefX[#1,,,,,,,]} % -\newbox\topbox +\newbox\toprefbox \newbox\printedrefnamebox +\newbox\infofilenamebox \newbox\printedmanualbox % \def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup \unsepspaces % + % Get args without leading/trailing spaces. \def\printedrefname{\ignorespaces #3}% \setbox\printedrefnamebox = \hbox{\printedrefname\unskip}% % + \def\infofilename{\ignorespaces #4}% + \setbox\infofilenamebox = \hbox{\infofilename\unskip}% + % \def\printedmanual{\ignorespaces #5}% \setbox\printedmanualbox = \hbox{\printedmanual\unskip}% % @@ -7861,11 +7937,18 @@ end \turnoffactive \makevalueexpandable % This expands tokens, so do it after making catcode changes, so _ - % etc. don't get their TeX definitions. + % etc. don't get their TeX definitions. This ignores all spaces in + % #4, including (wrongly) those in the middle of the filename. \getfilename{#4}% % + % This (wrongly) does not take account of leading or trailing + % spaces in #1, which should be ignored. \edef\pdfxrefdest{#1}% - \txiescapepdf\pdfxrefdest + \ifx\pdfxrefdest\empty + \def\pdfxrefdest{Top}% no empty targets + \else + \txiescapepdf\pdfxrefdest % escape PDF special chars + \fi % \leavevmode \startlink attr{/Border [0 0 0]}% @@ -7898,7 +7981,7 @@ end \printedrefname \fi % - % if the user also gave the printed manual name (fifth arg), append + % If the user also gave the printed manual name (fifth arg), append % "in MANUALNAME". \ifdim \wd\printedmanualbox > 0pt \space \putwordin{} \cite{\printedmanual}% @@ -7913,32 +7996,20 @@ end % this is a loss. Therefore, we give the text of the node name % again, so it is as if TeX is seeing it for the first time. % - % Cross-manual reference. Only include the "Section ``foo'' in" if - % the foo is neither missing or Top. Thus, @xref{,,,foo,The Foo Manual} - % outputs simply "see The Foo Manual". \ifdim \wd\printedmanualbox > 0pt - % What is the 7sp about? The idea is that we also want to omit - % the Section part if we would be printing "Top", since they are - % clearly trying to refer to the whole manual. But, this being - % TeX, we can't easily compare strings while ignoring the possible - % spaces before and after in the input. By adding the arbitrary - % 7sp, we make it much less likely that a real node name would - % happen to have the same width as "Top" (e.g., in a monospaced font). - % I hope it will never happen in practice. + % Cross-manual reference with a printed manual name. % - % For the same basic reason, we retypeset the "Top" at every - % reference, since the current font is indeterminate. + \crossmanualxref{\cite{\printedmanual\unskip}}% + % + \else\ifdim \wd\infofilenamebox > 0pt + % Cross-manual reference with only an info filename (arg 4), no + % printed manual name (arg 5). This is essentially the same as + % the case above; we output the filename, since we have nothing else. % - \setbox\topbox = \hbox{Top\kern7sp}% - \setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}% - \ifdim \wd2 > 7sp - \ifdim \wd2 = \wd\topbox \else - \putwordSection{} ``\printedrefname'' \putwordin{}\space - \fi - \fi - \cite{\printedmanual}% + \crossmanualxref{\code{\infofilename\unskip}}% + % \else - % Reference in this manual. + % Reference within this manual. % % _ (for example) has to be the character _ for the purposes of the % control sequence corresponding to the node, but it has to expand @@ -7959,11 +8030,37 @@ end % % output the `page 3'. \turnoffactive \putwordpage\tie\refx{#1-pg}{}% - \fi + \fi\fi \fi \endlink \endgroup} +% Output a cross-manual xref to #1. Used just above (twice). +% +% Only include the text "Section ``foo'' in" if the foo is neither +% missing or Top. Thus, @xref{,,,foo,The Foo Manual} outputs simply +% "see The Foo Manual", the idea being to refer to the whole manual. +% +% But, this being TeX, we can't easily compare our node name against the +% string "Top" while ignoring the possible spaces before and after in +% the input. By adding the arbitrary 7sp below, we make it much less +% likely that a real node name would have the same width as "Top" (e.g., +% in a monospaced font). Hopefully it will never happen in practice. +% +% For the same basic reason, we retypeset the "Top" at every +% reference, since the current font is indeterminate. +% +\def\crossmanualxref#1{% + \setbox\toprefbox = \hbox{Top\kern7sp}% + \setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}% + \ifdim \wd2 > 7sp % nonempty? + \ifdim \wd2 = \wd\toprefbox \else % same as Top? + \putwordSection{} ``\printedrefname'' \putwordin{}\space + \fi + \fi + #1% +} + % This macro is called from \xrefX for the `[nodename]' part of xref % output. It's a separate macro only so it can be changed more easily, % since square brackets don't work well in some documents. Particularly |