diff options
Diffstat (limited to 'ltmain.sh')
| -rwxr-xr-x | ltmain.sh | 3957 |
1 files changed, 2593 insertions, 1364 deletions
@@ -1,9 +1,9 @@ -# Generated from ltmain.m4sh. -# ltmain.sh (GNU libtool) 2.2.6b +# libtool (GNU libtool) 2.4 # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc. +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, +# 2007, 2008, 2009, 2010 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. @@ -32,50 +32,56 @@ # # Provide generalized library-building support services. # -# --config show all configuration variables -# --debug enable verbose shell tracing -# -n, --dry-run display commands without modifying any files -# --features display basic configuration information and exit -# --mode=MODE use operation mode MODE -# --preserve-dup-deps don't remove duplicate dependency libraries -# --quiet, --silent don't print informational messages -# --tag=TAG use configuration variables from tag TAG -# -v, --verbose print informational messages (default) -# --version print version information -# -h, --help print short or long help message +# --config show all configuration variables +# --debug enable verbose shell tracing +# -n, --dry-run display commands without modifying any files +# --features display basic configuration information and exit +# --mode=MODE use operation mode MODE +# --preserve-dup-deps don't remove duplicate dependency libraries +# --quiet, --silent don't print informational messages +# --no-quiet, --no-silent +# print informational messages (default) +# --tag=TAG use configuration variables from tag TAG +# -v, --verbose print more informational messages than default +# --no-verbose don't print the extra informational messages +# --version print version information +# -h, --help, --help-all print short, long, or detailed help message # # MODE must be one of the following: # -# clean remove files from the build directory -# compile compile a source file into a libtool object -# execute automatically set library path, then run a program -# finish complete the installation of libtool libraries -# install install libraries or executables -# link create a library or an executable -# uninstall remove libraries from an installed directory +# clean remove files from the build directory +# compile compile a source file into a libtool object +# execute automatically set library path, then run a program +# finish complete the installation of libtool libraries +# install install libraries or executables +# link create a library or an executable +# uninstall remove libraries from an installed directory # -# MODE-ARGS vary depending on the MODE. +# MODE-ARGS vary depending on the MODE. When passed as first option, +# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. # Try `$progname --help --mode=MODE' for a more detailed description of MODE. # # When reporting a bug, please describe a test case to reproduce it and # include the following information: # -# host-triplet: $host -# shell: $SHELL -# compiler: $LTCC -# compiler flags: $LTCFLAGS -# linker: $LD (gnu? $with_gnu_ld) -# $progname: (GNU libtool) 2.2.6b Debian-2.2.6b-2 -# automake: $automake_version -# autoconf: $autoconf_version +# host-triplet: $host +# shell: $SHELL +# compiler: $LTCC +# compiler flags: $LTCFLAGS +# linker: $LD (gnu? $with_gnu_ld) +# $progname: (GNU libtool) 2.4 Debian-2.4-2ubuntu1 +# automake: $automake_version +# autoconf: $autoconf_version # # Report bugs to <bug-libtool@gnu.org>. +# GNU libtool home page: <http://www.gnu.org/software/libtool/>. +# General help using GNU software: <http://www.gnu.org/gethelp/>. -PROGRAM=ltmain.sh +PROGRAM=libtool PACKAGE=libtool -VERSION="2.2.6b Debian-2.2.6b-2" +VERSION="2.4 Debian-2.4-2ubuntu1" TIMESTAMP="" -package_revision=1.3017 +package_revision=1.3293 # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then @@ -91,10 +97,15 @@ fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' +} + # NLS nuisances: We save the old values to restore during execute mode. -# Only set LANG and LC_ALL to C if already set. -# These must not be set unconditionally because not all systems understand -# e.g. LANG=C (notably SCO). lt_user_locale= lt_safe_locale= for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES @@ -107,15 +118,24 @@ do lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" fi" done +LC_ALL=C +LANGUAGE=C +export LANGUAGE LC_ALL $lt_unset CDPATH +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" : ${CP="cp -f"} -: ${ECHO="echo"} +test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} : ${EGREP="/bin/grep -E"} : ${FGREP="/bin/grep -F"} : ${GREP="/bin/grep"} @@ -144,6 +164,27 @@ IFS=" $lt_nl" dirname="s,/[^/]*$,," basename="s,^.*/,," +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi +} # func_dirname may be replaced by extended shell implementation + + +# func_basename file +func_basename () +{ + func_basename_result=`$ECHO "${1}" | $SED "$basename"` +} # func_basename may be replaced by extended shell implementation + + # func_dirname_and_basename file append nondir_replacement # perform func_basename and func_dirname in a single function # call: @@ -158,33 +199,183 @@ basename="s,^.*/,," # those functions but instead duplicate the functionality here. func_dirname_and_basename () { - # Extract subdirectory from the argument. - func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi - func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi + func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` +} # func_dirname_and_basename may be replaced by extended shell implementation + + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac +} # func_stripname may be replaced by extended shell implementation + + +# These SED scripts presuppose an absolute path with a trailing slash. +pathcar='s,^/\([^/]*\).*$,\1,' +pathcdr='s,^/[^/]*,,' +removedotparts=':dotsl + s@/\./@/@g + t dotsl + s,/\.$,/,' +collapseslashes='s@/\{1,\}@/@g' +finalslash='s,/*$,/,' + +# func_normal_abspath PATH +# Remove doubled-up and trailing slashes, "." path components, +# and cancel out any ".." path components in PATH after making +# it an absolute path. +# value returned in "$func_normal_abspath_result" +func_normal_abspath () +{ + # Start from root dir and reassemble the path. + func_normal_abspath_result= + func_normal_abspath_tpath=$1 + func_normal_abspath_altnamespace= + case $func_normal_abspath_tpath in + "") + # Empty path, that just means $cwd. + func_stripname '' '/' "`pwd`" + func_normal_abspath_result=$func_stripname_result + return + ;; + # The next three entries are used to spot a run of precisely + # two leading slashes without using negated character classes; + # we take advantage of case's first-match behaviour. + ///*) + # Unusual form of absolute path, do nothing. + ;; + //*) + # Not necessarily an ordinary path; POSIX reserves leading '//' + # and for example Cygwin uses it to access remote file shares + # over CIFS/SMB, so we conserve a leading double slash if found. + func_normal_abspath_altnamespace=/ + ;; + /*) + # Absolute path, do nothing. + ;; + *) + # Relative path, prepend $cwd. + func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath + ;; + esac + # Cancel out all the simple stuff to save iterations. We also want + # the path to end with a slash for ease of parsing, so make sure + # there is one (and only one) here. + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` + while :; do + # Processed it all yet? + if test "$func_normal_abspath_tpath" = / ; then + # If we ascended to the root using ".." the result may be empty now. + if test -z "$func_normal_abspath_result" ; then + func_normal_abspath_result=/ + fi + break + fi + func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$pathcar"` + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$pathcdr"` + # Figure out what to do with it + case $func_normal_abspath_tcomponent in + "") + # Trailing empty path component, ignore it. + ;; + ..) + # Parent dir; strip last assembled component from result. + func_dirname "$func_normal_abspath_result" + func_normal_abspath_result=$func_dirname_result + ;; + *) + # Actual path component, append it. + func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent + ;; + esac + done + # Restore leading double-slash if one was found on entry. + func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result } -# Generated shell functions inserted here. +# func_relative_path SRCDIR DSTDIR +# generates a relative path from SRCDIR to DSTDIR, with a trailing +# slash if non-empty, suitable for immediately appending a filename +# without needing to append a separator. +# value returned in "$func_relative_path_result" +func_relative_path () +{ + func_relative_path_result= + func_normal_abspath "$1" + func_relative_path_tlibdir=$func_normal_abspath_result + func_normal_abspath "$2" + func_relative_path_tbindir=$func_normal_abspath_result + + # Ascend the tree starting from libdir + while :; do + # check if we have found a prefix of bindir + case $func_relative_path_tbindir in + $func_relative_path_tlibdir) + # found an exact match + func_relative_path_tcancelled= + break + ;; + $func_relative_path_tlibdir*) + # found a matching prefix + func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" + func_relative_path_tcancelled=$func_stripname_result + if test -z "$func_relative_path_result"; then + func_relative_path_result=. + fi + break + ;; + *) + func_dirname $func_relative_path_tlibdir + func_relative_path_tlibdir=${func_dirname_result} + if test "x$func_relative_path_tlibdir" = x ; then + # Have to descend all the way to the root! + func_relative_path_result=../$func_relative_path_result + func_relative_path_tcancelled=$func_relative_path_tbindir + break + fi + func_relative_path_result=../$func_relative_path_result + ;; + esac + done -# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh -# is ksh but when the shell is invoked as "sh" and the current value of -# the _XPG environment variable is not equal to 1 (one), the special -# positional parameter $0, within a function call, is the name of the -# function. -progpath="$0" + # Now calculate path; take care to avoid doubling-up slashes. + func_stripname '' '/' "$func_relative_path_result" + func_relative_path_result=$func_stripname_result + func_stripname '/' '/' "$func_relative_path_tcancelled" + if test "x$func_stripname_result" != x ; then + func_relative_path_result=${func_relative_path_result}/${func_stripname_result} + fi + + # Normalisation. If bindir is libdir, return empty string, + # else relative path ending with a slash; either way, target + # file name can be directly appended. + if test ! -z "$func_relative_path_result"; then + func_stripname './' '' "$func_relative_path_result/" + func_relative_path_result=$func_stripname_result + fi +} # The name of this program: -# In the unlikely event $progname began with a '-', it would play havoc with -# func_echo (imagine progname=-n), so we prepend ./ in that case: func_dirname_and_basename "$progpath" progname=$func_basename_result -case $progname in - -*) progname=./$progname ;; -esac # Make sure we have an absolute path for reexecution: case $progpath in @@ -215,6 +406,15 @@ sed_quote_subst='s/\([`"$\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' +# Sed substitution that turns a string into a regex matching for the +# string literally. +sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' + +# Sed substitution that converts a w32 file name or path +# which contains forward slashes, into one that contains +# (escaped) backslashes. A very naive implementation. +lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + # Re-`\' parameter expansions in output of double_quote_subst that were # `\'-ed in input to the same. If an odd number of `\' preceded a '$' # in input to double_quote_subst, that '$' was protected from expansion. @@ -243,7 +443,7 @@ opt_warning=: # name if it has been set yet. func_echo () { - $ECHO "$progname${mode+: }$mode: $*" + $ECHO "$progname: ${opt_mode+$opt_mode: }$*" } # func_verbose arg... @@ -258,18 +458,25 @@ func_verbose () : } +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + # func_error arg... # Echo program name prefixed message to standard error. func_error () { - $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 + $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 } # func_warning arg... # Echo program name prefixed warning message to standard error. func_warning () { - $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 + $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 # bash bug again: : @@ -326,9 +533,9 @@ func_mkdir_p () case $my_directory_path in */*) ;; *) break ;; esac # ...otherwise throw away the child directory and loop - my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"` + my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` done - my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'` + my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` save_mkdir_p_IFS="$IFS"; IFS=':' for my_dir in $my_dir_list; do @@ -378,7 +585,7 @@ func_mktempdir () func_fatal_error "cannot create temporary directory \`$my_tmpdir'" fi - $ECHO "X$my_tmpdir" | $Xsed + $ECHO "$my_tmpdir" } @@ -392,7 +599,7 @@ func_quote_for_eval () { case $1 in *[\\\`\"\$]*) - func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;; + func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; *) func_quote_for_eval_unquoted_result="$1" ;; esac @@ -419,7 +626,7 @@ func_quote_for_expand () { case $1 in *[\\\`\"]*) - my_arg=`$ECHO "X$1" | $Xsed \ + my_arg=`$ECHO "$1" | $SED \ -e "$double_quote_subst" -e "$sed_double_backslash"` ;; *) my_arg="$1" ;; @@ -488,15 +695,39 @@ func_show_eval_locale () fi } - - +# func_tr_sh +# Turn $1 into a string suitable for a shell variable name. +# Result is stored in $func_tr_sh_result. All characters +# not in the set a-zA-Z0-9_ are replaced with '_'. Further, +# if $1 begins with a digit, a '_' is prepended as well. +func_tr_sh () +{ + case $1 in + [0-9]* | *[!a-zA-Z0-9_]*) + func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` + ;; + * ) + func_tr_sh_result=$1 + ;; + esac +} # func_version # Echo version message to standard output and exit. func_version () { - $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { + $opt_debug + + $SED -n '/(C)/!b go + :more + /\./!{ + N + s/\n# / / + b more + } + :go + /^# '$PROGRAM' (GNU /,/# warranty; / { s/^# // s/^# *$// s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ @@ -509,22 +740,28 @@ func_version () # Echo short help message to standard output and exit. func_usage () { - $SED -n '/^# Usage:/,/# -h/ { + $opt_debug + + $SED -n '/^# Usage:/,/^# *.*--help/ { s/^# // s/^# *$// s/\$progname/'$progname'/ p }' < "$progpath" - $ECHO + echo $ECHO "run \`$progname --help | more' for full usage" exit $? } -# func_help -# Echo long help message to standard output and exit. +# func_help [NOEXIT] +# Echo long help message to standard output and exit, +# unless 'noexit' is passed as argument. func_help () { + $opt_debug + $SED -n '/^# Usage:/,/# Report bugs to/ { + :print s/^# // s/^# *$// s*\$progname*'$progname'* @@ -537,8 +774,15 @@ func_help () s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ p - }' < "$progpath" - exit $? + d + } + /^# .* home page:/b print + /^# General help using/b print + ' < "$progpath" + ret=$? + if test -z "$1"; then + exit $ret + fi } # func_missing_arg argname @@ -546,63 +790,106 @@ func_help () # exit_cmd. func_missing_arg () { - func_error "missing argument for $1" + $opt_debug + + func_error "missing argument for $1." exit_cmd=exit } -exit_cmd=: +# func_split_short_opt shortopt +# Set func_split_short_opt_name and func_split_short_opt_arg shell +# variables after splitting SHORTOPT after the 2nd character. +func_split_short_opt () +{ + my_sed_short_opt='1s/^\(..\).*$/\1/;q' + my_sed_short_rest='1s/^..\(.*\)$/\1/;q' + + func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` + func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` +} # func_split_short_opt may be replaced by extended shell implementation +# func_split_long_opt longopt +# Set func_split_long_opt_name and func_split_long_opt_arg shell +# variables after splitting LONGOPT at the `=' sign. +func_split_long_opt () +{ + my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' + my_sed_long_arg='1s/^--[^=]*=//' + + func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` + func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` +} # func_split_long_opt may be replaced by extended shell implementation + +exit_cmd=: + -# Check that we have a working $ECHO. -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then - # Yippee, $ECHO works! - : -else - # Restart under the correct shell, and then maybe $ECHO will work. - exec $SHELL "$progpath" --no-reexec ${1+"$@"} -fi -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat <<EOF -$* -EOF - exit $EXIT_SUCCESS -fi magic="%%%MAGIC variable%%%" magic_exe="%%%MAGIC EXE variable%%%" # Global variables. -# $mode is unset nonopt= -execute_dlfiles= preserve_args= lo2o="s/\\.lo\$/.${objext}/" o2lo="s/\\.${objext}\$/.lo/" extracted_archives= extracted_serial=0 -opt_dry_run=false -opt_duplicate_deps=false -opt_silent=false -opt_debug=: - # If this variable is set in any of the actions, the command in it # will be execed at the end. This prevents here-documents from being # left over by shells. exec_cmd= +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "${1}=\$${1}\${2}" +} # func_append may be replaced by extended shell implementation + +# func_append_quoted var value +# Quote VALUE and append to the end of shell variable VAR, separated +# by a space. +func_append_quoted () +{ + func_quote_for_eval "${2}" + eval "${1}=\$${1}\\ \$func_quote_for_eval_result" +} # func_append_quoted may be replaced by extended shell implementation + + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "${@}"` +} # func_arith may be replaced by extended shell implementation + + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` +} # func_len may be replaced by extended shell implementation + + +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` +} # func_lo2o may be replaced by extended shell implementation + + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` +} # func_xform may be replaced by extended shell implementation + + # func_fatal_configuration arg... # Echo program name prefixed message to standard error, followed by # a configuration failure hint, and exit. @@ -636,16 +923,16 @@ func_config () # Display the features supported by this script. func_features () { - $ECHO "host: $host" + echo "host: $host" if test "$build_libtool_libs" = yes; then - $ECHO "enable shared libraries" + echo "enable shared libraries" else - $ECHO "disable shared libraries" + echo "disable shared libraries" fi if test "$build_old_libs" = yes; then - $ECHO "enable static libraries" + echo "enable static libraries" else - $ECHO "disable static libraries" + echo "disable static libraries" fi exit $? @@ -692,117 +979,204 @@ func_enable_tag () esac } -# Parse options once, thoroughly. This comes as soon as possible in -# the script to make things like `libtool --version' happen quickly. +# func_check_version_match +# Ensure that we are using m4 macros, and libtool script from the same +# release of libtool. +func_check_version_match () { + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from an older release. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + fi + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, +$progname: but the definition of this LT_INIT comes from revision $macro_revision. +$progname: You should recreate aclocal.m4 with macros from revision $package_revision +$progname: of $PACKAGE $VERSION and run autoconf again. +_LT_EOF + fi - # Shorthand for --mode=foo, only valid as the first argument - case $1 in - clean|clea|cle|cl) - shift; set dummy --mode clean ${1+"$@"}; shift - ;; - compile|compil|compi|comp|com|co|c) - shift; set dummy --mode compile ${1+"$@"}; shift - ;; - execute|execut|execu|exec|exe|ex|e) - shift; set dummy --mode execute ${1+"$@"}; shift - ;; - finish|finis|fini|fin|fi|f) - shift; set dummy --mode finish ${1+"$@"}; shift - ;; - install|instal|insta|inst|ins|in|i) - shift; set dummy --mode install ${1+"$@"}; shift - ;; - link|lin|li|l) - shift; set dummy --mode link ${1+"$@"}; shift - ;; - uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) - shift; set dummy --mode uninstall ${1+"$@"}; shift - ;; - esac + exit $EXIT_MISMATCH + fi +} + + +# Shorthand for --mode=foo, only valid as the first argument +case $1 in +clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift + ;; +compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift + ;; +execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; +finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; +install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; +link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; +uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; +esac - # Parse non-mode specific arguments: - while test "$#" -gt 0; do + + +# Option defaults: +opt_debug=: +opt_dry_run=false +opt_config=false +opt_preserve_dup_deps=false +opt_features=false +opt_finish=false +opt_help=false +opt_help_all=false +opt_silent=: +opt_verbose=: +opt_silent=false +opt_verbose=false + + +# Parse options once, thoroughly. This comes as soon as possible in the +# script to make things like `--version' happen as quickly as we can. +{ + # this just eases exit handling + while test $# -gt 0; do opt="$1" shift - case $opt in - --config) func_config ;; - - --debug) preserve_args="$preserve_args $opt" + --debug|-x) opt_debug='set -x' func_echo "enabling shell trace mode" - opt_debug='set -x' $opt_debug ;; - - -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break - execute_dlfiles="$execute_dlfiles $1" - shift + --dry-run|--dryrun|-n) + opt_dry_run=: ;; - - --dry-run | -n) opt_dry_run=: ;; - --features) func_features ;; - --finish) mode="finish" ;; - - --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break - case $1 in - # Valid mode arguments: - clean) ;; - compile) ;; - execute) ;; - finish) ;; - install) ;; - link) ;; - relink) ;; - uninstall) ;; - - # Catch anything else as an error - *) func_error "invalid argument for $opt" - exit_cmd=exit - break - ;; - esac - - mode="$1" + --config) + opt_config=: +func_config + ;; + --dlopen|-dlopen) + optarg="$1" + opt_dlopen="${opt_dlopen+$opt_dlopen +}$optarg" shift ;; - --preserve-dup-deps) - opt_duplicate_deps=: ;; - - --quiet|--silent) preserve_args="$preserve_args $opt" - opt_silent=: + opt_preserve_dup_deps=: ;; - - --verbose| -v) preserve_args="$preserve_args $opt" + --features) + opt_features=: +func_features + ;; + --finish) + opt_finish=: +set dummy --mode finish ${1+"$@"}; shift + ;; + --help) + opt_help=: + ;; + --help-all) + opt_help_all=: +opt_help=': help-all' + ;; + --mode) + test $# = 0 && func_missing_arg $opt && break + optarg="$1" + opt_mode="$optarg" +case $optarg in + # Valid mode arguments: + clean|compile|execute|finish|install|link|relink|uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $opt" + exit_cmd=exit + break + ;; +esac + shift + ;; + --no-silent|--no-quiet) opt_silent=false +func_append preserve_args " $opt" ;; - - --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break - preserve_args="$preserve_args $opt $1" - func_enable_tag "$1" # tagname is set here + --no-verbose) + opt_verbose=false +func_append preserve_args " $opt" + ;; + --silent|--quiet) + opt_silent=: +func_append preserve_args " $opt" + opt_verbose=false + ;; + --verbose|-v) + opt_verbose=: +func_append preserve_args " $opt" +opt_silent=false + ;; + --tag) + test $# = 0 && func_missing_arg $opt && break + optarg="$1" + opt_tag="$optarg" +func_append preserve_args " $opt $optarg" +func_enable_tag "$optarg" shift ;; + -\?|-h) func_usage ;; + --help) func_help ;; + --version) func_version ;; + # Separate optargs to long options: - -dlopen=*|--mode=*|--tag=*) - func_opt_split "$opt" - set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} + --*=*) + func_split_long_opt "$opt" + set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} shift ;; - -\?|-h) func_usage ;; - --help) opt_help=: ;; - --version) func_version ;; - - -*) func_fatal_help "unrecognized option \`$opt'" ;; - - *) nonopt="$opt" - break + # Separate non-argument short options: + -\?*|-h*|-n*|-v*) + func_split_short_opt "$opt" + set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} + shift ;; + + --) break ;; + -*) func_fatal_help "unrecognized option \`$opt'" ;; + *) set dummy "$opt" ${1+"$@"}; shift; break ;; esac done + # Validate options: + + # save first non-option argument + if test "$#" -gt 0; then + nonopt="$opt" + shift + fi + + # preserve --debug + test "$opt_debug" = : || func_append preserve_args " --debug" case $host in *cygwin* | *mingw* | *pw32* | *cegcc*) @@ -810,82 +1184,44 @@ func_enable_tag () opt_duplicate_compiler_generated_deps=: ;; *) - opt_duplicate_compiler_generated_deps=$opt_duplicate_deps + opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps ;; esac - # Having warned about all mis-specified options, bail out if - # anything was wrong. - $exit_cmd $EXIT_FAILURE -} + $opt_help || { + # Sanity checks first: + func_check_version_match -# func_check_version_match -# Ensure that we are using m4 macros, and libtool script from the same -# release of libtool. -func_check_version_match () -{ - if test "$package_revision" != "$macro_revision"; then - if test "$VERSION" != "$macro_version"; then - if test -z "$macro_version"; then - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from an older release. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - fi - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, -$progname: but the definition of this LT_INIT comes from revision $macro_revision. -$progname: You should recreate aclocal.m4 with macros from revision $package_revision -$progname: of $PACKAGE $VERSION and run autoconf again. -_LT_EOF + if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + func_fatal_configuration "not configured to build any kind of library" fi - exit $EXIT_MISMATCH - fi -} - - -## ----------- ## -## Main. ## -## ----------- ## + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" -$opt_help || { - # Sanity checks first: - func_check_version_match + # Only execute mode is allowed to have -dlopen flags. + if test -n "$opt_dlopen" && test "$opt_mode" != execute; then + func_error "unrecognized option \`-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi - if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then - func_fatal_configuration "not configured to build any kind of library" - fi + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$progname --help --mode=$opt_mode' for more information." + } - test -z "$mode" && func_fatal_error "error: you must specify a MODE." + # Bail if the options were screwed + $exit_cmd $EXIT_FAILURE +} - # Darwin sucks - eval std_shrext=\"$shrext_cmds\" - # Only execute mode is allowed to have -dlopen flags. - if test -n "$execute_dlfiles" && test "$mode" != execute; then - func_error "unrecognized option \`-dlopen'" - $ECHO "$help" 1>&2 - exit $EXIT_FAILURE - fi - - # Change the help message to a mode-specific one. - generic_help="$help" - help="Try \`$progname --help --mode=$mode' for more information." -} +## ----------- ## +## Main. ## +## ----------- ## # func_lalib_p file # True iff FILE is a libtool `.la' library or `.lo' object file. @@ -950,12 +1286,9 @@ func_ltwrapper_executable_p () # temporary ltwrapper_script. func_ltwrapper_scriptname () { - func_ltwrapper_scriptname_result="" - if func_ltwrapper_executable_p "$1"; then - func_dirname_and_basename "$1" "" "." - func_stripname '' '.exe' "$func_basename_result" - func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" - fi + func_dirname_and_basename "$1" "" "." + func_stripname '' '.exe' "$func_basename_result" + func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" } # func_ltwrapper_p file @@ -1001,6 +1334,37 @@ func_source () } +# func_resolve_sysroot PATH +# Replace a leading = in PATH with a sysroot. Store the result into +# func_resolve_sysroot_result +func_resolve_sysroot () +{ + func_resolve_sysroot_result=$1 + case $func_resolve_sysroot_result in + =*) + func_stripname '=' '' "$func_resolve_sysroot_result" + func_resolve_sysroot_result=$lt_sysroot$func_stripname_result + ;; + esac +} + +# func_replace_sysroot PATH +# If PATH begins with the sysroot, replace it with = and +# store the result into func_replace_sysroot_result. +func_replace_sysroot () +{ + case "$lt_sysroot:$1" in + ?*:"$lt_sysroot"*) + func_stripname "$lt_sysroot" '' "$1" + func_replace_sysroot_result="=$func_stripname_result" + ;; + *) + # Including no sysroot. + func_replace_sysroot_result=$1 + ;; + esac +} + # func_infer_tag arg # Infer tagged configuration to use if any are available and # if one wasn't chosen via the "--tag" command line option. @@ -1013,13 +1377,15 @@ func_infer_tag () if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do - func_quote_for_eval "$arg" - CC_quoted="$CC_quoted $func_quote_for_eval_result" + func_append_quoted CC_quoted "$arg" done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` case $@ in # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when configure was run. - " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;; + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; # Blanks at the start of $base_compile will cause this to fail # if we don't check for them as well. *) @@ -1030,11 +1396,13 @@ func_infer_tag () CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. - func_quote_for_eval "$arg" - CC_quoted="$CC_quoted $func_quote_for_eval_result" + func_append_quoted CC_quoted "$arg" done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` case "$@ " in - " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) # The compiler in the base compile command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. @@ -1097,6 +1465,486 @@ EOF } } + +################################################## +# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS # +################################################## + +# func_convert_core_file_wine_to_w32 ARG +# Helper function used by file name conversion functions when $build is *nix, +# and $host is mingw, cygwin, or some other w32 environment. Relies on a +# correctly configured wine environment available, with the winepath program +# in $build's $PATH. +# +# ARG is the $build file name to be converted to w32 format. +# Result is available in $func_convert_core_file_wine_to_w32_result, and will +# be empty on error (or when ARG is empty) +func_convert_core_file_wine_to_w32 () +{ + $opt_debug + func_convert_core_file_wine_to_w32_result="$1" + if test -n "$1"; then + # Unfortunately, winepath does not exit with a non-zero error code, so we + # are forced to check the contents of stdout. On the other hand, if the + # command is not found, the shell will set an exit code of 127 and print + # *an error message* to stdout. So we must check for both error code of + # zero AND non-empty stdout, which explains the odd construction: + func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null` + if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then + func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | + $SED -e "$lt_sed_naive_backslashify"` + else + func_convert_core_file_wine_to_w32_result= + fi + fi +} +# end: func_convert_core_file_wine_to_w32 + + +# func_convert_core_path_wine_to_w32 ARG +# Helper function used by path conversion functions when $build is *nix, and +# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly +# configured wine environment available, with the winepath program in $build's +# $PATH. Assumes ARG has no leading or trailing path separator characters. +# +# ARG is path to be converted from $build format to win32. +# Result is available in $func_convert_core_path_wine_to_w32_result. +# Unconvertible file (directory) names in ARG are skipped; if no directory names +# are convertible, then the result may be empty. +func_convert_core_path_wine_to_w32 () +{ + $opt_debug + # unfortunately, winepath doesn't convert paths, only file names + func_convert_core_path_wine_to_w32_result="" + if test -n "$1"; then + oldIFS=$IFS + IFS=: + for func_convert_core_path_wine_to_w32_f in $1; do + IFS=$oldIFS + func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" + if test -n "$func_convert_core_file_wine_to_w32_result" ; then + if test -z "$func_convert_core_path_wine_to_w32_result"; then + func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" + else + func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" + fi + fi + done + IFS=$oldIFS + fi +} +# end: func_convert_core_path_wine_to_w32 + + +# func_cygpath ARGS... +# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when +# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) +# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or +# (2), returns the Cygwin file name or path in func_cygpath_result (input +# file name or path is assumed to be in w32 format, as previously converted +# from $build's *nix or MSYS format). In case (3), returns the w32 file name +# or path in func_cygpath_result (input file name or path is assumed to be in +# Cygwin format). Returns an empty string on error. +# +# ARGS are passed to cygpath, with the last one being the file name or path to +# be converted. +# +# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH +# environment variable; do not put it in $PATH. +func_cygpath () +{ + $opt_debug + if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then + func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` + if test "$?" -ne 0; then + # on failure, ensure result is empty + func_cygpath_result= + fi + else + func_cygpath_result= + func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" + fi +} +#end: func_cygpath + + +# func_convert_core_msys_to_w32 ARG +# Convert file name or path ARG from MSYS format to w32 format. Return +# result in func_convert_core_msys_to_w32_result. +func_convert_core_msys_to_w32 () +{ + $opt_debug + # awkward: cmd appends spaces to result + func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | + $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` +} +#end: func_convert_core_msys_to_w32 + + +# func_convert_file_check ARG1 ARG2 +# Verify that ARG1 (a file name in $build format) was converted to $host +# format in ARG2. Otherwise, emit an error message, but continue (resetting +# func_to_host_file_result to ARG1). +func_convert_file_check () +{ + $opt_debug + if test -z "$2" && test -n "$1" ; then + func_error "Could not determine host file name corresponding to" + func_error " \`$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback: + func_to_host_file_result="$1" + fi +} +# end func_convert_file_check + + +# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH +# Verify that FROM_PATH (a path in $build format) was converted to $host +# format in TO_PATH. Otherwise, emit an error message, but continue, resetting +# func_to_host_file_result to a simplistic fallback value (see below). +func_convert_path_check () +{ + $opt_debug + if test -z "$4" && test -n "$3"; then + func_error "Could not determine the host path corresponding to" + func_error " \`$3'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback. This is a deliberately simplistic "conversion" and + # should not be "improved". See libtool.info. + if test "x$1" != "x$2"; then + lt_replace_pathsep_chars="s|$1|$2|g" + func_to_host_path_result=`echo "$3" | + $SED -e "$lt_replace_pathsep_chars"` + else + func_to_host_path_result="$3" + fi + fi +} +# end func_convert_path_check + + +# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG +# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT +# and appending REPL if ORIG matches BACKPAT. +func_convert_path_front_back_pathsep () +{ + $opt_debug + case $4 in + $1 ) func_to_host_path_result="$3$func_to_host_path_result" + ;; + esac + case $4 in + $2 ) func_append func_to_host_path_result "$3" + ;; + esac +} +# end func_convert_path_front_back_pathsep + + +################################################## +# $build to $host FILE NAME CONVERSION FUNCTIONS # +################################################## +# invoked via `$to_host_file_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# Result will be available in $func_to_host_file_result. + + +# func_to_host_file ARG +# Converts the file name ARG from $build format to $host format. Return result +# in func_to_host_file_result. +func_to_host_file () +{ + $opt_debug + $to_host_file_cmd "$1" +} +# end func_to_host_file + + +# func_to_tool_file ARG LAZY +# converts the file name ARG from $build format to toolchain format. Return +# result in func_to_tool_file_result. If the conversion in use is listed +# in (the comma separated) LAZY, no conversion takes place. +func_to_tool_file () +{ + $opt_debug + case ,$2, in + *,"$to_tool_file_cmd",*) + func_to_tool_file_result=$1 + ;; + *) + $to_tool_file_cmd "$1" + func_to_tool_file_result=$func_to_host_file_result + ;; + esac +} +# end func_to_tool_file + + +# func_convert_file_noop ARG +# Copy ARG to func_to_host_file_result. +func_convert_file_noop () +{ + func_to_host_file_result="$1" +} +# end func_convert_file_noop + + +# func_convert_file_msys_to_w32 ARG +# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_file_result. +func_convert_file_msys_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_to_host_file_result="$func_convert_core_msys_to_w32_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_w32 + + +# func_convert_file_cygwin_to_w32 ARG +# Convert file name ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_file_cygwin_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + # because $build is cygwin, we call "the" cygpath in $PATH; no need to use + # LT_CYGPATH in this case. + func_to_host_file_result=`cygpath -m "$1"` + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_cygwin_to_w32 + + +# func_convert_file_nix_to_w32 ARG +# Convert file name ARG from *nix to w32 format. Requires a wine environment +# and a working winepath. Returns result in func_to_host_file_result. +func_convert_file_nix_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_file_wine_to_w32 "$1" + func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_w32 + + +# func_convert_file_msys_to_cygwin ARG +# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_file_msys_to_cygwin () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_cygpath -u "$func_convert_core_msys_to_w32_result" + func_to_host_file_result="$func_cygpath_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_cygwin + + +# func_convert_file_nix_to_cygwin ARG +# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed +# in a wine environment, working winepath, and LT_CYGPATH set. Returns result +# in func_to_host_file_result. +func_convert_file_nix_to_cygwin () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. + func_convert_core_file_wine_to_w32 "$1" + func_cygpath -u "$func_convert_core_file_wine_to_w32_result" + func_to_host_file_result="$func_cygpath_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_cygwin + + +############################################# +# $build to $host PATH CONVERSION FUNCTIONS # +############################################# +# invoked via `$to_host_path_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# The result will be available in $func_to_host_path_result. +# +# Path separators are also converted from $build format to $host format. If +# ARG begins or ends with a path separator character, it is preserved (but +# converted to $host format) on output. +# +# All path conversion functions are named using the following convention: +# file name conversion function : func_convert_file_X_to_Y () +# path conversion function : func_convert_path_X_to_Y () +# where, for any given $build/$host combination the 'X_to_Y' value is the +# same. If conversion functions are added for new $build/$host combinations, +# the two new functions must follow this pattern, or func_init_to_host_path_cmd +# will break. + + +# func_init_to_host_path_cmd +# Ensures that function "pointer" variable $to_host_path_cmd is set to the +# appropriate value, based on the value of $to_host_file_cmd. +to_host_path_cmd= +func_init_to_host_path_cmd () +{ + $opt_debug + if test -z "$to_host_path_cmd"; then + func_stripname 'func_convert_file_' '' "$to_host_file_cmd" + to_host_path_cmd="func_convert_path_${func_stripname_result}" + fi +} + + +# func_to_host_path ARG +# Converts the path ARG from $build format to $host format. Return result +# in func_to_host_path_result. +func_to_host_path () +{ + $opt_debug + func_init_to_host_path_cmd + $to_host_path_cmd "$1" +} +# end func_to_host_path + + +# func_convert_path_noop ARG +# Copy ARG to func_to_host_path_result. +func_convert_path_noop () +{ + func_to_host_path_result="$1" +} +# end func_convert_path_noop + + +# func_convert_path_msys_to_w32 ARG +# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_path_result. +func_convert_path_msys_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # Remove leading and trailing path separator characters from ARG. MSYS + # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; + # and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result="$func_convert_core_msys_to_w32_result" + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_msys_to_w32 + + +# func_convert_path_cygwin_to_w32 ARG +# Convert path ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_path_cygwin_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_cygwin_to_w32 + + +# func_convert_path_nix_to_w32 ARG +# Convert path ARG from *nix to w32 format. Requires a wine environment and +# a working winepath. Returns result in func_to_host_file_result. +func_convert_path_nix_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_nix_to_w32 + + +# func_convert_path_msys_to_cygwin ARG +# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_path_msys_to_cygwin () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_msys_to_w32_result" + func_to_host_path_result="$func_cygpath_result" + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" + fi +} +# end func_convert_path_msys_to_cygwin + + +# func_convert_path_nix_to_cygwin ARG +# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a +# a wine environment, working winepath, and LT_CYGPATH set. Returns result in +# func_to_host_file_result. +func_convert_path_nix_to_cygwin () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # Remove leading and trailing path separator characters from + # ARG. msys behavior is inconsistent here, cygpath turns them + # into '.;' and ';.', and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" + func_to_host_path_result="$func_cygpath_result" + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" + fi +} +# end func_convert_path_nix_to_cygwin + + # func_mode_compile arg... func_mode_compile () { @@ -1137,12 +1985,12 @@ func_mode_compile () ;; -pie | -fpie | -fPIE) - pie_flag="$pie_flag $arg" + func_append pie_flag " $arg" continue ;; -shared | -static | -prefer-pic | -prefer-non-pic) - later="$later $arg" + func_append later " $arg" continue ;; @@ -1163,15 +2011,14 @@ func_mode_compile () save_ifs="$IFS"; IFS=',' for arg in $args; do IFS="$save_ifs" - func_quote_for_eval "$arg" - lastarg="$lastarg $func_quote_for_eval_result" + func_append_quoted lastarg "$arg" done IFS="$save_ifs" func_stripname ' ' '' "$lastarg" lastarg=$func_stripname_result # Add the arguments to base_compile. - base_compile="$base_compile $lastarg" + func_append base_compile " $lastarg" continue ;; @@ -1187,8 +2034,7 @@ func_mode_compile () esac # case $arg_mode # Aesthetically quote the previous argument. - func_quote_for_eval "$lastarg" - base_compile="$base_compile $func_quote_for_eval_result" + func_append_quoted base_compile "$lastarg" done # for arg case $arg_mode in @@ -1213,7 +2059,7 @@ func_mode_compile () *.[cCFSifmso] | \ *.ada | *.adb | *.ads | *.asm | \ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ - *.[fF][09]? | *.for | *.java | *.obj | *.sx) + *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup) func_xform "$libobj" libobj=$func_xform_result ;; @@ -1288,7 +2134,7 @@ func_mode_compile () # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then - output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} + output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" else output_obj= @@ -1319,17 +2165,16 @@ compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi - removelist="$removelist $output_obj" + func_append removelist " $output_obj" $ECHO "$srcfile" > "$lockfile" fi $opt_dry_run || $RM $removelist - removelist="$removelist $lockfile" + func_append removelist " $lockfile" trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 - if test -n "$fix_srcfile_path"; then - eval srcfile=\"$fix_srcfile_path\" - fi + func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 + srcfile=$func_to_tool_file_result func_quote_for_eval "$srcfile" qsrcfile=$func_quote_for_eval_result @@ -1349,7 +2194,7 @@ compiler." if test -z "$output_obj"; then # Place PIC objects in $objdir - command="$command -o $lobj" + func_append command " -o $lobj" fi func_show_eval_locale "$command" \ @@ -1396,11 +2241,11 @@ compiler." command="$base_compile $qsrcfile $pic_flag" fi if test "$compiler_c_o" = yes; then - command="$command -o $obj" + func_append command " -o $obj" fi # Suppress compiler output if we already did a PIC compilation. - command="$command$suppress_output" + func_append command "$suppress_output" func_show_eval_locale "$command" \ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' @@ -1445,13 +2290,13 @@ compiler." } $opt_help || { -test "$mode" = compile && func_mode_compile ${1+"$@"} + test "$opt_mode" = compile && func_mode_compile ${1+"$@"} } func_mode_help () { # We need to display help for each of the modes. - case $mode in + case $opt_mode in "") # Generic help is extracted from the usage comments # at the start of this file. @@ -1482,10 +2327,11 @@ This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE -no-suppress do not suppress compiler output for multiple passes - -prefer-pic try to building PIC objects only - -prefer-non-pic try to building non-PIC objects only + -prefer-pic try to build PIC objects only + -prefer-non-pic try to build non-PIC objects only -shared do not build a \`.o' file suitable for static linking -static only build a \`.o' file suitable for static linking + -Wc,FLAG pass FLAG directly to the compiler COMPILE-COMMAND is a command to be used in creating a \`standard' object file from the given SOURCEFILE. @@ -1538,7 +2384,7 @@ either the \`install' or \`cp' program. The following components of INSTALL-COMMAND are treated specially: - -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation + -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." @@ -1558,6 +2404,8 @@ The following components of LINK-COMMAND are treated specially: -all-static do not do any dynamic linking at all -avoid-version do not add a version suffix if possible + -bindir BINDIR specify path to binaries directory (for systems where + libraries must be found in the PATH setting at runtime) -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) @@ -1586,6 +2434,11 @@ The following components of LINK-COMMAND are treated specially: -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] -weak LIBNAME declare that the target provides the LIBNAME interface + -Wc,FLAG + -Xcompiler FLAG pass linker-specific FLAG directly to the compiler + -Wl,FLAG + -Xlinker FLAG pass linker-specific FLAG directly to the linker + -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) All other options (arguments beginning with \`-') are ignored. @@ -1619,18 +2472,44 @@ Otherwise, only FILE itself is deleted using RM." ;; *) - func_fatal_help "invalid operation mode \`$mode'" + func_fatal_help "invalid operation mode \`$opt_mode'" ;; esac - $ECHO + echo $ECHO "Try \`$progname --help' for more information about other modes." - - exit $? } - # Now that we've collected a possible --mode arg, show help if necessary - $opt_help && func_mode_help +# Now that we've collected a possible --mode arg, show help if necessary +if $opt_help; then + if test "$opt_help" = :; then + func_mode_help + else + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + func_mode_help + done + } | sed -n '1p; 2,$s/^Usage:/ or: /p' + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + echo + func_mode_help + done + } | + sed '1d + /^When reporting/,/^Report/{ + H + d + } + $x + /information about other modes/d + /more detailed .*MODE/d + s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' + fi + exit $? +fi # func_mode_execute arg... @@ -1643,13 +2522,16 @@ func_mode_execute () func_fatal_help "you must specify a COMMAND" # Handle -dlopen flags immediately. - for file in $execute_dlfiles; do + for file in $opt_dlopen; do test -f "$file" \ || func_fatal_help "\`$file' is not a file" dir= case $file in *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result + # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$lib' is not a valid libtool archive" @@ -1671,7 +2553,7 @@ func_mode_execute () dir="$func_dirname_result" if test -f "$dir/$objdir/$dlname"; then - dir="$dir/$objdir" + func_append dir "/$objdir" else if test ! -f "$dir/$dlname"; then func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" @@ -1712,7 +2594,7 @@ func_mode_execute () for file do case $file in - -*) ;; + -* | *.la | *.lo ) ;; *) # Do a test to see if this is really a libtool program. if func_ltwrapper_script_p "$file"; then @@ -1728,8 +2610,7 @@ func_mode_execute () ;; esac # Quote arguments (to preserve shell metacharacters). - func_quote_for_eval "$file" - args="$args $func_quote_for_eval_result" + func_append_quoted args "$file" done if test "X$opt_dry_run" = Xfalse; then @@ -1754,29 +2635,66 @@ func_mode_execute () # Display what would be done. if test -n "$shlibpath_var"; then eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" - $ECHO "export $shlibpath_var" + echo "export $shlibpath_var" fi $ECHO "$cmd$args" exit $EXIT_SUCCESS fi } -test "$mode" = execute && func_mode_execute ${1+"$@"} +test "$opt_mode" = execute && func_mode_execute ${1+"$@"} # func_mode_finish arg... func_mode_finish () { $opt_debug - libdirs="$nonopt" + libs= + libdirs= admincmds= - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - for dir - do - libdirs="$libdirs $dir" - done + for opt in "$nonopt" ${1+"$@"} + do + if test -d "$opt"; then + func_append libdirs " $opt" + + elif test -f "$opt"; then + if func_lalib_unsafe_p "$opt"; then + func_append libs " $opt" + else + func_warning "\`$opt' is not a valid libtool archive" + fi + + else + func_fatal_error "invalid argument \`$opt'" + fi + done + + if test -n "$libs"; then + if test -n "$lt_sysroot"; then + sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` + sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" + else + sysroot_cmd= + fi + + # Remove sysroot references + if $opt_dry_run; then + for lib in $libs; do + echo "removing references to $lt_sysroot and \`=' prefixes from $lib" + done + else + tmpdir=`func_mktempdir` + for lib in $libs; do + sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ + > $tmpdir/tmp-la + mv -f $tmpdir/tmp-la $lib + done + ${RM}r "$tmpdir" + fi + fi + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. @@ -1786,7 +2704,7 @@ func_mode_finish () if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" - $opt_dry_run || eval "$cmds" || admincmds="$admincmds + $opt_dry_run || eval "$cmds" || func_append admincmds " $cmds" fi done @@ -1795,53 +2713,55 @@ func_mode_finish () # Exit here if they wanted silent mode. $opt_silent && exit $EXIT_SUCCESS - $ECHO "X----------------------------------------------------------------------" | $Xsed - $ECHO "Libraries have been installed in:" - for libdir in $libdirs; do - $ECHO " $libdir" - done - $ECHO - $ECHO "If you ever happen to want to link against installed libraries" - $ECHO "in a given directory, LIBDIR, you must either use libtool, and" - $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'" - $ECHO "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable" - $ECHO " during execution" - fi - if test -n "$runpath_var"; then - $ECHO " - add LIBDIR to the \`$runpath_var' environment variable" - $ECHO " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + echo "----------------------------------------------------------------------" + echo "Libraries have been installed in:" + for libdir in $libdirs; do + $ECHO " $libdir" + done + echo + echo "If you ever happen to want to link against installed libraries" + echo "in a given directory, LIBDIR, you must either use libtool, and" + echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + echo " during execution" + fi + if test -n "$runpath_var"; then + echo " - add LIBDIR to the \`$runpath_var' environment variable" + echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" - $ECHO " - use the \`$flag' linker flag" - fi - if test -n "$admincmds"; then - $ECHO " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" - fi - $ECHO + $ECHO " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $ECHO " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + echo - $ECHO "See any operating system documentation about shared libraries for" - case $host in - solaris2.[6789]|solaris2.1[0-9]) - $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual" - $ECHO "pages." - ;; - *) - $ECHO "more information, such as the ld(1) and ld.so(8) manual pages." - ;; - esac - $ECHO "X----------------------------------------------------------------------" | $Xsed + echo "See any operating system documentation about shared libraries for" + case $host in + solaris2.[6789]|solaris2.1[0-9]) + echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" + echo "pages." + ;; + *) + echo "more information, such as the ld(1) and ld.so(8) manual pages." + ;; + esac + echo "----------------------------------------------------------------------" + fi exit $EXIT_SUCCESS } -test "$mode" = finish && func_mode_finish ${1+"$@"} +test "$opt_mode" = finish && func_mode_finish ${1+"$@"} # func_mode_install arg... @@ -1852,7 +2772,7 @@ func_mode_install () # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. - $ECHO "X$nonopt" | $GREP shtool >/dev/null; then + case $nonopt in *shtool*) :;; *) false;; esac; then # Aesthetically quote it. func_quote_for_eval "$nonopt" install_prog="$func_quote_for_eval_result " @@ -1866,7 +2786,12 @@ func_mode_install () # The real first argument should be the name of the installation program. # Aesthetically quote it. func_quote_for_eval "$arg" - install_prog="$install_prog$func_quote_for_eval_result" + func_append install_prog "$func_quote_for_eval_result" + install_shared_prog=$install_prog + case " $install_prog " in + *[\\\ /]cp\ *) install_cp=: ;; + *) install_cp=false ;; + esac # We need to accept at least all the BSD install flags. dest= @@ -1876,10 +2801,12 @@ func_mode_install () install_type= isdir=no stripme= + no_mode=: for arg do + arg2= if test -n "$dest"; then - files="$files $dest" + func_append files " $dest" dest=$arg continue fi @@ -1887,10 +2814,9 @@ func_mode_install () case $arg in -d) isdir=yes ;; -f) - case " $install_prog " in - *[\\\ /]cp\ *) ;; - *) prev=$arg ;; - esac + if $install_cp; then :; else + prev=$arg + fi ;; -g | -m | -o) prev=$arg @@ -1904,6 +2830,10 @@ func_mode_install () *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then + if test "x$prev" = x-m && test -n "$install_override_mode"; then + arg2=$install_override_mode + no_mode=false + fi prev= else dest=$arg @@ -1914,7 +2844,11 @@ func_mode_install () # Aesthetically quote the argument. func_quote_for_eval "$arg" - install_prog="$install_prog $func_quote_for_eval_result" + func_append install_prog " $func_quote_for_eval_result" + if test -n "$arg2"; then + func_quote_for_eval "$arg2" + fi + func_append install_shared_prog " $func_quote_for_eval_result" done test -z "$install_prog" && \ @@ -1923,6 +2857,13 @@ func_mode_install () test -n "$prev" && \ func_fatal_help "the \`$prev' option requires an argument" + if test -n "$install_override_mode" && $no_mode; then + if $install_cp; then :; else + func_quote_for_eval "$install_override_mode" + func_append install_shared_prog " -m $func_quote_for_eval_result" + fi + fi + if test -z "$files"; then if test -z "$dest"; then func_fatal_help "no file or destination specified" @@ -1977,10 +2918,13 @@ func_mode_install () case $file in *.$libext) # Do the static libraries later. - staticlibs="$staticlibs $file" + func_append staticlibs " $file" ;; *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result + # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$file' is not a valid libtool archive" @@ -1994,23 +2938,23 @@ func_mode_install () if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; - *) current_libdirs="$current_libdirs $libdir" ;; + *) func_append current_libdirs " $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; - *) future_libdirs="$future_libdirs $libdir" ;; + *) func_append future_libdirs " $libdir" ;; esac fi func_dirname "$file" "/" "" dir="$func_dirname_result" - dir="$dir$objdir" + func_append dir "$objdir" if test -n "$relink_command"; then # Determine the prefix the user has applied to our future dir. - inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"` + inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` # Don't allow the user to place us outside of our expected # location b/c this prevents finding dependent libraries that @@ -2023,9 +2967,9 @@ func_mode_install () if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. - relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` else - relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"` + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` fi func_warning "relinking \`$file'" @@ -2043,7 +2987,7 @@ func_mode_install () test -n "$relink_command" && srcname="$realname"T # Install the shared library and build the symlinks. - func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \ + func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ 'exit $?' tstripme="$stripme" case $host_os in @@ -2083,7 +3027,7 @@ func_mode_install () func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' # Maybe install the static library, too. - test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" + test -n "$old_library" && func_append staticlibs " $dir/$old_library" ;; *.lo) @@ -2183,7 +3127,7 @@ func_mode_install () if test -f "$lib"; then func_source "$lib" fi - libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test + libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test if test -n "$libdir" && test ! -f "$libfile"; then func_warning "\`$lib' has not been installed in \`$libdir'" finalize=no @@ -2202,7 +3146,7 @@ func_mode_install () file="$func_basename_result" outputname="$tmpdir/$file" # Replace the output file specification. - relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` + relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` $opt_silent || { func_quote_for_expand "$relink_command" @@ -2221,7 +3165,7 @@ func_mode_install () } else # Install the binary that we compiled earlier. - file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` fi fi @@ -2280,7 +3224,7 @@ func_mode_install () fi } -test "$mode" = install && func_mode_install ${1+"$@"} +test "$opt_mode" = install && func_mode_install ${1+"$@"} # func_generate_dlsyms outputname originator pic_p @@ -2323,6 +3267,22 @@ func_generate_dlsyms () extern \"C\" { #endif +#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) +#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" +#endif + +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + /* External symbol declarations for the compiler. */\ " @@ -2332,10 +3292,11 @@ extern \"C\" { $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. - progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` for progfile in $progfiles; do - func_verbose "extracting global C symbols from \`$progfile'" - $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" + func_to_tool_file "$progfile" func_convert_file_msys_to_w32 + func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" + $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" done if test -n "$exclude_expsyms"; then @@ -2371,7 +3332,7 @@ extern \"C\" { eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' case $host in - *cygwin | *mingw* | *cegcc* ) + *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ;; @@ -2384,10 +3345,52 @@ extern \"C\" { func_verbose "extracting global C symbols from \`$dlprefile'" func_basename "$dlprefile" name="$func_basename_result" - $opt_dry_run || { - eval '$ECHO ": $name " >> "$nlist"' - eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" - } + case $host in + *cygwin* | *mingw* | *cegcc* ) + # if an import library, we need to obtain dlname + if func_win32_import_lib_p "$dlprefile"; then + func_tr_sh "$dlprefile" + eval "curr_lafile=\$libfile_$func_tr_sh_result" + dlprefile_dlbasename="" + if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then + # Use subshell, to avoid clobbering current variable values + dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` + if test -n "$dlprefile_dlname" ; then + func_basename "$dlprefile_dlname" + dlprefile_dlbasename="$func_basename_result" + else + # no lafile. user explicitly requested -dlpreopen <import library>. + $sharedlib_from_linklib_cmd "$dlprefile" + dlprefile_dlbasename=$sharedlib_from_linklib_result + fi + fi + $opt_dry_run || { + if test -n "$dlprefile_dlbasename" ; then + eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' + else + func_warning "Could not compute DLL name from $name" + eval '$ECHO ": $name " >> "$nlist"' + fi + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | + $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" + } + else # not an import lib + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + fi + ;; + *) + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + ;; + esac done $opt_dry_run || { @@ -2415,36 +3418,19 @@ extern \"C\" { if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' else - $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms" + echo '/* NONE */' >> "$output_objdir/$my_dlsyms" fi - $ECHO >> "$output_objdir/$my_dlsyms" "\ + echo >> "$output_objdir/$my_dlsyms" "\ /* The mapping between symbol names and symbols. */ typedef struct { const char *name; void *address; } lt_dlsymlist; -" - case $host in - *cygwin* | *mingw* | *cegcc* ) - $ECHO >> "$output_objdir/$my_dlsyms" "\ -/* DATA imports from DLLs on WIN32 con't be const, because - runtime relocations are performed -- see ld's documentation - on pseudo-relocs. */" - lt_dlsym_const= ;; - *osf5*) - echo >> "$output_objdir/$my_dlsyms" "\ -/* This system does not cope well with relocations in const data */" - lt_dlsym_const= ;; - *) - lt_dlsym_const=const ;; - esac - - $ECHO >> "$output_objdir/$my_dlsyms" "\ -extern $lt_dlsym_const lt_dlsymlist +extern LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[]; -$lt_dlsym_const lt_dlsymlist +LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[] = {\ { \"$my_originator\", (void *) 0 }," @@ -2457,7 +3443,7 @@ lt_${my_prefix}_LTX_preloaded_symbols[] = eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; esac - $ECHO >> "$output_objdir/$my_dlsyms" "\ + echo >> "$output_objdir/$my_dlsyms" "\ {0, (void *) 0} }; @@ -2500,7 +3486,7 @@ static const void *lt_preloaded_setup() { for arg in $LTCFLAGS; do case $arg in -pie | -fpie | -fPIE) ;; - *) symtab_cflags="$symtab_cflags $arg" ;; + *) func_append symtab_cflags " $arg" ;; esac done @@ -2515,16 +3501,16 @@ static const void *lt_preloaded_setup() { case $host in *cygwin* | *mingw* | *cegcc* ) if test -f "$output_objdir/$my_outputname.def"; then - compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` - finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` else - compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` fi ;; *) - compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` ;; esac ;; @@ -2538,8 +3524,8 @@ static const void *lt_preloaded_setup() { # really was required. # Nullify the symbol file. - compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` - finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` + compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` fi } @@ -2549,6 +3535,7 @@ static const void *lt_preloaded_setup() { # Need a lot of goo to handle *both* DLLs and import libs # Has to be a shell function in order to 'eat' the argument # that is supplied when $file_magic_command is called. +# Despite the name, also deal with 64 bit binaries. func_win32_libid () { $opt_debug @@ -2559,9 +3546,11 @@ func_win32_libid () win32_libid_type="x86 archive import" ;; *ar\ archive*) # could be an import, or static + # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | - $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then - win32_nmres=`eval $NM -f posix -A $1 | + $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then + func_to_tool_file "$1" func_convert_file_msys_to_w32 + win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | $SED -n -e ' 1,100{ / I /{ @@ -2590,6 +3579,131 @@ func_win32_libid () $ECHO "$win32_libid_type" } +# func_cygming_dll_for_implib ARG +# +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib () +{ + $opt_debug + sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` +} + +# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs +# +# The is the core of a fallback implementation of a +# platform-specific function to extract the name of the +# DLL associated with the specified import library LIBNAME. +# +# SECTION_NAME is either .idata$6 or .idata$7, depending +# on the platform and compiler that created the implib. +# +# Echos the name of the DLL associated with the +# specified import library. +func_cygming_dll_for_implib_fallback_core () +{ + $opt_debug + match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` + $OBJDUMP -s --section "$1" "$2" 2>/dev/null | + $SED '/^Contents of section '"$match_literal"':/{ + # Place marker at beginning of archive member dllname section + s/.*/====MARK====/ + p + d + } + # These lines can sometimes be longer than 43 characters, but + # are always uninteresting + /:[ ]*file format pe[i]\{,1\}-/d + /^In archive [^:]*:/d + # Ensure marker is printed + /^====MARK====/p + # Remove all lines with less than 43 characters + /^.\{43\}/!d + # From remaining lines, remove first 43 characters + s/^.\{43\}//' | + $SED -n ' + # Join marker and all lines until next marker into a single line + /^====MARK====/ b para + H + $ b para + b + :para + x + s/\n//g + # Remove the marker + s/^====MARK====// + # Remove trailing dots and whitespace + s/[\. \t]*$// + # Print + /./p' | + # we now have a list, one entry per line, of the stringified + # contents of the appropriate section of all members of the + # archive which possess that section. Heuristic: eliminate + # all those which have a first or second character that is + # a '.' (that is, objdump's representation of an unprintable + # character.) This should work for all archives with less than + # 0x302f exports -- but will fail for DLLs whose name actually + # begins with a literal '.' or a single character followed by + # a '.'. + # + # Of those that remain, print the first one. + $SED -e '/^\./d;/^.\./d;q' +} + +# func_cygming_gnu_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is a GNU/binutils-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_gnu_implib_p () +{ + $opt_debug + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` + test -n "$func_cygming_gnu_implib_tmp" +} + +# func_cygming_ms_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is an MS-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_ms_implib_p () +{ + $opt_debug + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` + test -n "$func_cygming_ms_implib_tmp" +} + +# func_cygming_dll_for_implib_fallback ARG +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# +# This fallback implementation is for use when $DLLTOOL +# does not support the --identify-strict option. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib_fallback () +{ + $opt_debug + if func_cygming_gnu_implib_p "$1" ; then + # binutils import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` + elif func_cygming_ms_implib_p "$1" ; then + # ms-generated import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` + else + # unknown + sharedlib_from_linklib_result="" + fi +} # func_extract_an_archive dir oldlib @@ -2598,7 +3712,18 @@ func_extract_an_archive () $opt_debug f_ex_an_ar_dir="$1"; shift f_ex_an_ar_oldlib="$1" - func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?' + if test "$lock_old_archive_extraction" = yes; then + lockfile=$f_ex_an_ar_oldlib.lock + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + fi + func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ + 'stat=$?; rm -f "$lockfile"; exit $stat' + if test "$lock_old_archive_extraction" = yes; then + $opt_dry_run || rm -f "$lockfile" + fi if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then : else @@ -2669,7 +3794,7 @@ func_extract_archives () darwin_file= darwin_files= for darwin_file in $darwin_filelist; do - darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` + darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` $LIPO -create -output "$darwin_file" $darwin_files done # $darwin_filelist $RM -rf unfat-$$ @@ -2684,25 +3809,30 @@ func_extract_archives () func_extract_an_archive "$my_xdir" "$my_xabs" ;; esac - my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` done func_extract_archives_result="$my_oldobjs" } - -# func_emit_wrapper_part1 [arg=no] +# func_emit_wrapper [arg=no] # -# Emit the first part of a libtool wrapper script on stdout. -# For more information, see the description associated with -# func_emit_wrapper(), below. -func_emit_wrapper_part1 () +# Emit a libtool wrapper script on stdout. +# Don't directly open a file because we may want to +# incorporate the script contents within a cygwin/mingw +# wrapper executable. Must ONLY be called from within +# func_mode_link because it depends on a number of variables +# set therein. +# +# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR +# variable will take. If 'yes', then the emitted script +# will assume that the directory in which it is stored is +# the $objdir directory. This is a cygwin/mingw-specific +# behavior. +func_emit_wrapper () { - func_emit_wrapper_part1_arg1=no - if test -n "$1" ; then - func_emit_wrapper_part1_arg1=$1 - fi + func_emit_wrapper_arg1=${1-no} $ECHO "\ #! $SHELL @@ -2718,7 +3848,6 @@ func_emit_wrapper_part1 () # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. -Xsed='${SED} -e 1s/^X//' sed_quote_subst='$sed_quote_subst' # Be Bourne compatible @@ -2749,31 +3878,132 @@ if test \"\$libtool_install_magic\" = \"$magic\"; then else # When we are sourced in execute mode, \$file and \$ECHO are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then - ECHO=\"$qecho\" - file=\"\$0\" - # Make sure echo works. - if test \"X\$1\" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift - elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then - # Yippee, \$ECHO works! - : - else - # Restart under the correct shell, and then maybe \$ECHO will work. - exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} - fi - fi\ + file=\"\$0\"" + + qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` + $ECHO "\ + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + ECHO=\"$qECHO\" + fi + +# Very basic option parsing. These options are (a) specific to +# the libtool wrapper, (b) are identical between the wrapper +# /script/ and the wrapper /executable/ which is used only on +# windows platforms, and (c) all begin with the string "--lt-" +# (application programs are unlikely to have options which match +# this pattern). +# +# There are only two supported options: --lt-debug and +# --lt-dump-script. There is, deliberately, no --lt-help. +# +# The first argument to this parsing function should be the +# script's $0 value, followed by "$@". +lt_option_debug= +func_parse_lt_options () +{ + lt_script_arg0=\$0 + shift + for lt_opt + do + case \"\$lt_opt\" in + --lt-debug) lt_option_debug=1 ;; + --lt-dump-script) + lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` + test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. + lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` + cat \"\$lt_dump_D/\$lt_dump_F\" + exit 0 + ;; + --lt-*) + \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 + exit 1 + ;; + esac + done + + # Print the debug banner immediately: + if test -n \"\$lt_option_debug\"; then + echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 + fi +} + +# Used when --lt-debug. Prints its arguments to stdout +# (redirection is the responsibility of the caller) +func_lt_dump_args () +{ + lt_dump_args_N=1; + for lt_arg + do + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" + lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` + done +} + +# Core function for launching the target application +func_exec_program_core () +{ " - $ECHO "\ + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2* | *-cegcc*) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $ECHO "\ + \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 + exit 1 +} + +# A function to encapsulate launching the target application +# Strips options in the --lt-* namespace from \$@ and +# launches target application with the remaining arguments. +func_exec_program () +{ + for lt_wr_arg + do + case \$lt_wr_arg in + --lt-*) ;; + *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; + esac + shift + done + func_exec_program_core \${1+\"\$@\"} +} + + # Parse options + func_parse_lt_options \"\$0\" \${1+\"\$@\"} # Find the directory that this script lives in. - thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` + thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` + file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` while test -n \"\$file\"; do - destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` + destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then @@ -2783,30 +4013,13 @@ else esac fi - file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` + file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` done -" -} -# end: func_emit_wrapper_part1 - -# func_emit_wrapper_part2 [arg=no] -# -# Emit the second part of a libtool wrapper script on stdout. -# For more information, see the description associated with -# func_emit_wrapper(), below. -func_emit_wrapper_part2 () -{ - func_emit_wrapper_part2_arg1=no - if test -n "$1" ; then - func_emit_wrapper_part2_arg1=$1 - fi - - $ECHO "\ # Usually 'no', except on cygwin/mingw when embedded into # the cwrapper. - WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1 + WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then # special case for '.' if test \"\$thisdir\" = \".\"; then @@ -2814,7 +4027,7 @@ func_emit_wrapper_part2 () fi # remove .libs from thisdir case \"\$thisdir\" in - *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;; + *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; $objdir ) thisdir=. ;; esac fi @@ -2869,6 +4082,18 @@ func_emit_wrapper_part2 () if test -f \"\$progdir/\$program\"; then" + # fixup the dll searchpath if we need to. + # + # Fix the DLL searchpath if we need to. Do this before prepending + # to shlibpath, because on Windows, both are PATH and uninstalled + # libraries must come first. + if test -n "$dllsearchpath"; then + $ECHO "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + # Export our shlibpath_var if we have one. if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $ECHO "\ @@ -2877,253 +4102,28 @@ func_emit_wrapper_part2 () # Some systems cannot cope with colon-terminated $shlibpath_var # The second colon is a workaround for a bug in BeOS R4 sed - $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` + $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` export $shlibpath_var " fi - # fixup the dll searchpath if we need to. - if test -n "$dllsearchpath"; then - $ECHO "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" - fi - $ECHO "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. -" - case $host in - # Backslashes separate directories on plain windows - *-*-mingw | *-*-os2* | *-cegcc*) - $ECHO "\ - exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} -" - ;; - - *) - $ECHO "\ - exec \"\$progdir/\$program\" \${1+\"\$@\"} -" - ;; - esac - $ECHO "\ - \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 - exit 1 + func_exec_program \${1+\"\$@\"} fi else # The program doesn't exist. \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 - $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 + \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 fi fi\ " } -# end: func_emit_wrapper_part2 - - -# func_emit_wrapper [arg=no] -# -# Emit a libtool wrapper script on stdout. -# Don't directly open a file because we may want to -# incorporate the script contents within a cygwin/mingw -# wrapper executable. Must ONLY be called from within -# func_mode_link because it depends on a number of variables -# set therein. -# -# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR -# variable will take. If 'yes', then the emitted script -# will assume that the directory in which it is stored is -# the $objdir directory. This is a cygwin/mingw-specific -# behavior. -func_emit_wrapper () -{ - func_emit_wrapper_arg1=no - if test -n "$1" ; then - func_emit_wrapper_arg1=$1 - fi - - # split this up so that func_emit_cwrapperexe_src - # can call each part independently. - func_emit_wrapper_part1 "${func_emit_wrapper_arg1}" - func_emit_wrapper_part2 "${func_emit_wrapper_arg1}" -} - - -# func_to_host_path arg -# -# Convert paths to host format when used with build tools. -# Intended for use with "native" mingw (where libtool itself -# is running under the msys shell), or in the following cross- -# build environments: -# $build $host -# mingw (msys) mingw [e.g. native] -# cygwin mingw -# *nix + wine mingw -# where wine is equipped with the `winepath' executable. -# In the native mingw case, the (msys) shell automatically -# converts paths for any non-msys applications it launches, -# but that facility isn't available from inside the cwrapper. -# Similar accommodations are necessary for $host mingw and -# $build cygwin. Calling this function does no harm for other -# $host/$build combinations not listed above. -# -# ARG is the path (on $build) that should be converted to -# the proper representation for $host. The result is stored -# in $func_to_host_path_result. -func_to_host_path () -{ - func_to_host_path_result="$1" - if test -n "$1" ; then - case $host in - *mingw* ) - lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' - case $build in - *mingw* ) # actually, msys - # awkward: cmd appends spaces to result - lt_sed_strip_trailing_spaces="s/[ ]*\$//" - func_to_host_path_tmp1=`( cmd //c echo "$1" |\ - $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` - func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ - $SED -e "$lt_sed_naive_backslashify"` - ;; - *cygwin* ) - func_to_host_path_tmp1=`cygpath -w "$1"` - func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ - $SED -e "$lt_sed_naive_backslashify"` - ;; - * ) - # Unfortunately, winepath does not exit with a non-zero - # error code, so we are forced to check the contents of - # stdout. On the other hand, if the command is not - # found, the shell will set an exit code of 127 and print - # *an error message* to stdout. So we must check for both - # error code of zero AND non-empty stdout, which explains - # the odd construction: - func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null` - if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then - func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ - $SED -e "$lt_sed_naive_backslashify"` - else - # Allow warning below. - func_to_host_path_result="" - fi - ;; - esac - if test -z "$func_to_host_path_result" ; then - func_error "Could not determine host path corresponding to" - func_error " '$1'" - func_error "Continuing, but uninstalled executables may not work." - # Fallback: - func_to_host_path_result="$1" - fi - ;; - esac - fi -} -# end: func_to_host_path -# func_to_host_pathlist arg -# -# Convert pathlists to host format when used with build tools. -# See func_to_host_path(), above. This function supports the -# following $build/$host combinations (but does no harm for -# combinations not listed here): -# $build $host -# mingw (msys) mingw [e.g. native] -# cygwin mingw -# *nix + wine mingw -# -# Path separators are also converted from $build format to -# $host format. If ARG begins or ends with a path separator -# character, it is preserved (but converted to $host format) -# on output. -# -# ARG is a pathlist (on $build) that should be converted to -# the proper representation on $host. The result is stored -# in $func_to_host_pathlist_result. -func_to_host_pathlist () -{ - func_to_host_pathlist_result="$1" - if test -n "$1" ; then - case $host in - *mingw* ) - lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' - # Remove leading and trailing path separator characters from - # ARG. msys behavior is inconsistent here, cygpath turns them - # into '.;' and ';.', and winepath ignores them completely. - func_to_host_pathlist_tmp2="$1" - # Once set for this call, this variable should not be - # reassigned. It is used in tha fallback case. - func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\ - $SED -e 's|^:*||' -e 's|:*$||'` - case $build in - *mingw* ) # Actually, msys. - # Awkward: cmd appends spaces to result. - lt_sed_strip_trailing_spaces="s/[ ]*\$//" - func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\ - $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` - func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ - $SED -e "$lt_sed_naive_backslashify"` - ;; - *cygwin* ) - func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"` - func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ - $SED -e "$lt_sed_naive_backslashify"` - ;; - * ) - # unfortunately, winepath doesn't convert pathlists - func_to_host_pathlist_result="" - func_to_host_pathlist_oldIFS=$IFS - IFS=: - for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do - IFS=$func_to_host_pathlist_oldIFS - if test -n "$func_to_host_pathlist_f" ; then - func_to_host_path "$func_to_host_pathlist_f" - if test -n "$func_to_host_path_result" ; then - if test -z "$func_to_host_pathlist_result" ; then - func_to_host_pathlist_result="$func_to_host_path_result" - else - func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result" - fi - fi - fi - IFS=: - done - IFS=$func_to_host_pathlist_oldIFS - ;; - esac - if test -z "$func_to_host_pathlist_result" ; then - func_error "Could not determine the host path(s) corresponding to" - func_error " '$1'" - func_error "Continuing, but uninstalled executables may not work." - # Fallback. This may break if $1 contains DOS-style drive - # specifications. The fix is not to complicate the expression - # below, but for the user to provide a working wine installation - # with winepath so that path translation in the cross-to-mingw - # case works properly. - lt_replace_pathsep_nix_to_dos="s|:|;|g" - func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\ - $SED -e "$lt_replace_pathsep_nix_to_dos"` - fi - # Now, add the leading and trailing path separators back - case "$1" in - :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result" - ;; - esac - case "$1" in - *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;" - ;; - esac - ;; - esac - fi -} -# end: func_to_host_pathlist # func_emit_cwrapperexe_src # emit the source code for a wrapper executable on stdout @@ -3141,31 +4141,23 @@ func_emit_cwrapperexe_src () This wrapper executable should never be moved out of the build directory. If it is, it will not operate correctly. - - Currently, it simply execs the wrapper *script* "$SHELL $output", - but could eventually absorb all of the scripts functionality and - exec $objdir/$outputname directly. */ EOF cat <<"EOF" +#ifdef _MSC_VER +# define _CRT_SECURE_NO_DEPRECATE 1 +#endif #include <stdio.h> #include <stdlib.h> #ifdef _MSC_VER # include <direct.h> # include <process.h> # include <io.h> -# define setmode _setmode #else # include <unistd.h> # include <stdint.h> # ifdef __CYGWIN__ # include <io.h> -# define HAVE_SETENV -# ifdef __STRICT_ANSI__ -char *realpath (const char *, char *); -int putenv (char *); -int setenv (const char *, const char *, int); -# endif # endif #endif #include <malloc.h> @@ -3177,6 +4169,44 @@ int setenv (const char *, const char *, int); #include <fcntl.h> #include <sys/stat.h> +/* declarations of non-ANSI functions */ +#if defined(__MINGW32__) +# ifdef __STRICT_ANSI__ +int _putenv (const char *); +# endif +#elif defined(__CYGWIN__) +# ifdef __STRICT_ANSI__ +char *realpath (const char *, char *); +int putenv (char *); +int setenv (const char *, const char *, int); +# endif +/* #elif defined (other platforms) ... */ +#endif + +/* portability defines, excluding path handling macros */ +#if defined(_MSC_VER) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +# define S_IXUSR _S_IEXEC +# ifndef _INTPTR_T_DEFINED +# define _INTPTR_T_DEFINED +# define intptr_t int +# endif +#elif defined(__MINGW32__) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +#elif defined(__CYGWIN__) +# define HAVE_SETENV +# define FOPEN_WB "wb" +/* #elif defined (other platforms) ... */ +#endif + #if defined(PATH_MAX) # define LT_PATHMAX PATH_MAX #elif defined(MAXPATHLEN) @@ -3192,14 +4222,7 @@ int setenv (const char *, const char *, int); # define S_IXGRP 0 #endif -#ifdef _MSC_VER -# define S_IXUSR _S_IEXEC -# define stat _stat -# ifndef _INTPTR_T_DEFINED -# define intptr_t int -# endif -#endif - +/* path handling portability macros */ #ifndef DIR_SEPARATOR # define DIR_SEPARATOR '/' # define PATH_SEPARATOR ':' @@ -3230,10 +4253,6 @@ int setenv (const char *, const char *, int); # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) #endif /* PATH_SEPARATOR_2 */ -#ifdef __CYGWIN__ -# define FOPEN_WB "wb" -#endif - #ifndef FOPEN_WB # define FOPEN_WB "w" #endif @@ -3246,22 +4265,13 @@ int setenv (const char *, const char *, int); if (stale) { free ((void *) stale); stale = 0; } \ } while (0) -#undef LTWRAPPER_DEBUGPRINTF -#if defined DEBUGWRAPPER -# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args -static void -ltwrapper_debugprintf (const char *fmt, ...) -{ - va_list args; - va_start (args, fmt); - (void) vfprintf (stderr, fmt, args); - va_end (args); -} +#if defined(LT_DEBUGWRAPPER) +static int lt_debug = 1; #else -# define LTWRAPPER_DEBUGPRINTF(args) +static int lt_debug = 0; #endif -const char *program_name = NULL; +const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ void *xmalloc (size_t num); char *xstrdup (const char *string); @@ -3271,41 +4281,27 @@ char *chase_symlinks (const char *pathspec); int make_executable (const char *path); int check_executable (const char *path); char *strendzap (char *str, const char *pat); -void lt_fatal (const char *message, ...); +void lt_debugprintf (const char *file, int line, const char *fmt, ...); +void lt_fatal (const char *file, int line, const char *message, ...); +static const char *nonnull (const char *s); +static const char *nonempty (const char *s); void lt_setenv (const char *name, const char *value); char *lt_extend_str (const char *orig_value, const char *add, int to_end); -void lt_opt_process_env_set (const char *arg); -void lt_opt_process_env_prepend (const char *arg); -void lt_opt_process_env_append (const char *arg); -int lt_split_name_value (const char *arg, char** name, char** value); void lt_update_exe_path (const char *name, const char *value); void lt_update_lib_path (const char *name, const char *value); - -static const char *script_text_part1 = +char **prepare_spawn (char **argv); +void lt_dump_script (FILE *f); EOF - func_emit_wrapper_part1 yes | - $SED -e 's/\([\\"]\)/\\\1/g' \ - -e 's/^/ "/' -e 's/$/\\n"/' - echo ";" cat <<EOF - -static const char *script_text_part2 = -EOF - func_emit_wrapper_part2 yes | - $SED -e 's/\([\\"]\)/\\\1/g' \ - -e 's/^/ "/' -e 's/$/\\n"/' - echo ";" - - cat <<EOF -const char * MAGIC_EXE = "$magic_exe"; +volatile const char * MAGIC_EXE = "$magic_exe"; const char * LIB_PATH_VARNAME = "$shlibpath_var"; EOF if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - func_to_host_pathlist "$temp_rpath" + func_to_host_path "$temp_rpath" cat <<EOF -const char * LIB_PATH_VALUE = "$func_to_host_pathlist_result"; +const char * LIB_PATH_VALUE = "$func_to_host_path_result"; EOF else cat <<"EOF" @@ -3314,10 +4310,10 @@ EOF fi if test -n "$dllsearchpath"; then - func_to_host_pathlist "$dllsearchpath:" + func_to_host_path "$dllsearchpath:" cat <<EOF const char * EXE_PATH_VARNAME = "PATH"; -const char * EXE_PATH_VALUE = "$func_to_host_pathlist_result"; +const char * EXE_PATH_VALUE = "$func_to_host_path_result"; EOF else cat <<"EOF" @@ -3340,24 +4336,10 @@ EOF cat <<"EOF" #define LTWRAPPER_OPTION_PREFIX "--lt-" -#define LTWRAPPER_OPTION_PREFIX_LENGTH 5 -static const size_t opt_prefix_len = LTWRAPPER_OPTION_PREFIX_LENGTH; static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX; - static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script"; - -static const size_t env_set_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 7; -static const char *env_set_opt = LTWRAPPER_OPTION_PREFIX "env-set"; - /* argument is putenv-style "foo=bar", value of foo is set to bar */ - -static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11; -static const char *env_prepend_opt = LTWRAPPER_OPTION_PREFIX "env-prepend"; - /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */ - -static const size_t env_append_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 10; -static const char *env_append_opt = LTWRAPPER_OPTION_PREFIX "env-append"; - /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */ +static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug"; int main (int argc, char *argv[]) @@ -3374,10 +4356,13 @@ main (int argc, char *argv[]) int i; program_name = (char *) xstrdup (base_name (argv[0])); - LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0])); - LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name)); + newargz = XMALLOC (char *, argc + 1); - /* very simple arg parsing; don't want to rely on getopt */ + /* very simple arg parsing; don't want to rely on getopt + * also, copy all non cwrapper options to newargz, except + * argz[0], which is handled differently + */ + newargc=0; for (i = 1; i < argc; i++) { if (strcmp (argv[i], dumpscript_opt) == 0) @@ -3391,25 +4376,57 @@ EOF esac cat <<"EOF" - printf ("%s", script_text_part1); - printf ("%s", script_text_part2); + lt_dump_script (stdout); return 0; } + if (strcmp (argv[i], debug_opt) == 0) + { + lt_debug = 1; + continue; + } + if (strcmp (argv[i], ltwrapper_option_prefix) == 0) + { + /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX + namespace, but it is not one of the ones we know about and + have already dealt with, above (inluding dump-script), then + report an error. Otherwise, targets might begin to believe + they are allowed to use options in the LTWRAPPER_OPTION_PREFIX + namespace. The first time any user complains about this, we'll + need to make LTWRAPPER_OPTION_PREFIX a configure-time option + or a configure.ac-settable value. + */ + lt_fatal (__FILE__, __LINE__, + "unrecognized %s option: '%s'", + ltwrapper_option_prefix, argv[i]); + } + /* otherwise ... */ + newargz[++newargc] = xstrdup (argv[i]); } + newargz[++newargc] = NULL; + +EOF + cat <<EOF + /* The GNU banner must be the first non-error debug message */ + lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n"); +EOF + cat <<"EOF" + lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]); + lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name); - newargz = XMALLOC (char *, argc + 1); tmp_pathspec = find_executable (argv[0]); if (tmp_pathspec == NULL) - lt_fatal ("Couldn't find %s", argv[0]); - LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n", - tmp_pathspec)); + lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]); + lt_debugprintf (__FILE__, __LINE__, + "(main) found exe (before symlink chase) at: %s\n", + tmp_pathspec); actual_cwrapper_path = chase_symlinks (tmp_pathspec); - LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n", - actual_cwrapper_path)); + lt_debugprintf (__FILE__, __LINE__, + "(main) found exe (after symlink chase) at: %s\n", + actual_cwrapper_path); XFREE (tmp_pathspec); - actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path)); + actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path)); strendzap (actual_cwrapper_path, actual_cwrapper_name); /* wrapper name transforms */ @@ -3427,8 +4444,9 @@ EOF target_name = tmp_pathspec; tmp_pathspec = 0; - LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n", - target_name)); + lt_debugprintf (__FILE__, __LINE__, + "(main) libtool target name: %s\n", + target_name); EOF cat <<EOF @@ -3478,80 +4496,19 @@ EOF lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */ lt_setenv ("DUALCASE", "1"); /* for MSK sh */ - lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE); + /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must + be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath) + because on Windows, both *_VARNAMEs are PATH but uninstalled + libraries must come first. */ lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE); + lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE); - newargc=0; - for (i = 1; i < argc; i++) - { - if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0) - { - if (argv[i][env_set_opt_len] == '=') - { - const char *p = argv[i] + env_set_opt_len + 1; - lt_opt_process_env_set (p); - } - else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc) - { - lt_opt_process_env_set (argv[++i]); /* don't copy */ - } - else - lt_fatal ("%s missing required argument", env_set_opt); - continue; - } - if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0) - { - if (argv[i][env_prepend_opt_len] == '=') - { - const char *p = argv[i] + env_prepend_opt_len + 1; - lt_opt_process_env_prepend (p); - } - else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc) - { - lt_opt_process_env_prepend (argv[++i]); /* don't copy */ - } - else - lt_fatal ("%s missing required argument", env_prepend_opt); - continue; - } - if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0) - { - if (argv[i][env_append_opt_len] == '=') - { - const char *p = argv[i] + env_append_opt_len + 1; - lt_opt_process_env_append (p); - } - else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc) - { - lt_opt_process_env_append (argv[++i]); /* don't copy */ - } - else - lt_fatal ("%s missing required argument", env_append_opt); - continue; - } - if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0) - { - /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX - namespace, but it is not one of the ones we know about and - have already dealt with, above (inluding dump-script), then - report an error. Otherwise, targets might begin to believe - they are allowed to use options in the LTWRAPPER_OPTION_PREFIX - namespace. The first time any user complains about this, we'll - need to make LTWRAPPER_OPTION_PREFIX a configure-time option - or a configure.ac-settable value. - */ - lt_fatal ("Unrecognized option in %s namespace: '%s'", - ltwrapper_option_prefix, argv[i]); - } - /* otherwise ... */ - newargz[++newargc] = xstrdup (argv[i]); - } - newargz[++newargc] = NULL; - - LTWRAPPER_DEBUGPRINTF (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>"))); + lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n", + nonnull (lt_argv_zero)); for (i = 0; i < newargc; i++) { - LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>"))); + lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n", + i, nonnull (newargz[i])); } EOF @@ -3560,11 +4517,14 @@ EOF mingw*) cat <<"EOF" /* execv doesn't actually work on mingw as expected on unix */ + newargz = prepare_spawn (newargz); rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz); if (rval == -1) { /* failed to start process */ - LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno)); + lt_debugprintf (__FILE__, __LINE__, + "(main) failed to launch target \"%s\": %s\n", + lt_argv_zero, nonnull (strerror (errno))); return 127; } return rval; @@ -3586,7 +4546,7 @@ xmalloc (size_t num) { void *p = (void *) malloc (num); if (!p) - lt_fatal ("Memory exhausted"); + lt_fatal (__FILE__, __LINE__, "memory exhausted"); return p; } @@ -3620,8 +4580,8 @@ check_executable (const char *path) { struct stat st; - LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n", - path ? (*path ? path : "EMPTY!") : "NULL!")); + lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n", + nonempty (path)); if ((!path) || (!*path)) return 0; @@ -3638,8 +4598,8 @@ make_executable (const char *path) int rval = 0; struct stat st; - LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", - path ? (*path ? path : "EMPTY!") : "NULL!")); + lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", + nonempty (path)); if ((!path) || (!*path)) return 0; @@ -3665,8 +4625,8 @@ find_executable (const char *wrapper) int tmp_len; char *concat_name; - LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", - wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); + lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", + nonempty (wrapper)); if ((wrapper == NULL) || (*wrapper == '\0')) return NULL; @@ -3719,7 +4679,8 @@ find_executable (const char *wrapper) { /* empty path: current directory */ if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal ("getcwd failed"); + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); @@ -3744,7 +4705,8 @@ find_executable (const char *wrapper) } /* Relative path | not found in path: prepend cwd */ if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal ("getcwd failed"); + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); @@ -3770,8 +4732,9 @@ chase_symlinks (const char *pathspec) int has_symlinks = 0; while (strlen (tmp_pathspec) && !has_symlinks) { - LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", - tmp_pathspec)); + lt_debugprintf (__FILE__, __LINE__, + "checking path component for symlinks: %s\n", + tmp_pathspec); if (lstat (tmp_pathspec, &s) == 0) { if (S_ISLNK (s.st_mode) != 0) @@ -3793,8 +4756,9 @@ chase_symlinks (const char *pathspec) } else { - char *errstr = strerror (errno); - lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); + lt_fatal (__FILE__, __LINE__, + "error accessing file \"%s\": %s", + tmp_pathspec, nonnull (strerror (errno))); } } XFREE (tmp_pathspec); @@ -3807,7 +4771,8 @@ chase_symlinks (const char *pathspec) tmp_pathspec = realpath (pathspec, buf); if (tmp_pathspec == 0) { - lt_fatal ("Could not follow symlinks for %s", pathspec); + lt_fatal (__FILE__, __LINE__, + "could not follow symlinks for %s", pathspec); } return xstrdup (tmp_pathspec); #endif @@ -3833,11 +4798,25 @@ strendzap (char *str, const char *pat) return str; } +void +lt_debugprintf (const char *file, int line, const char *fmt, ...) +{ + va_list args; + if (lt_debug) + { + (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); + va_start (args, fmt); + (void) vfprintf (stderr, fmt, args); + va_end (args); + } +} + static void -lt_error_core (int exit_status, const char *mode, +lt_error_core (int exit_status, const char *file, + int line, const char *mode, const char *message, va_list ap) { - fprintf (stderr, "%s: %s: ", program_name, mode); + fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); vfprintf (stderr, message, ap); fprintf (stderr, ".\n"); @@ -3846,20 +4825,32 @@ lt_error_core (int exit_status, const char *mode, } void -lt_fatal (const char *message, ...) +lt_fatal (const char *file, int line, const char *message, ...) { va_list ap; va_start (ap, message); - lt_error_core (EXIT_FAILURE, "FATAL", message, ap); + lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); va_end (ap); } +static const char * +nonnull (const char *s) +{ + return s ? s : "(null)"; +} + +static const char * +nonempty (const char *s) +{ + return (s && !*s) ? "(empty)" : nonnull (s); +} + void lt_setenv (const char *name, const char *value) { - LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n", - (name ? name : "<NULL>"), - (value ? value : "<NULL>"))); + lt_debugprintf (__FILE__, __LINE__, + "(lt_setenv) setting '%s' to '%s'\n", + nonnull (name), nonnull (value)); { #ifdef HAVE_SETENV /* always make a copy, for consistency with !HAVE_SETENV */ @@ -3904,95 +4895,12 @@ lt_extend_str (const char *orig_value, const char *add, int to_end) return new_value; } -int -lt_split_name_value (const char *arg, char** name, char** value) -{ - const char *p; - int len; - if (!arg || !*arg) - return 1; - - p = strchr (arg, (int)'='); - - if (!p) - return 1; - - *value = xstrdup (++p); - - len = strlen (arg) - strlen (*value); - *name = XMALLOC (char, len); - strncpy (*name, arg, len-1); - (*name)[len - 1] = '\0'; - - return 0; -} - -void -lt_opt_process_env_set (const char *arg) -{ - char *name = NULL; - char *value = NULL; - - if (lt_split_name_value (arg, &name, &value) != 0) - { - XFREE (name); - XFREE (value); - lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg); - } - - lt_setenv (name, value); - XFREE (name); - XFREE (value); -} - -void -lt_opt_process_env_prepend (const char *arg) -{ - char *name = NULL; - char *value = NULL; - char *new_value = NULL; - - if (lt_split_name_value (arg, &name, &value) != 0) - { - XFREE (name); - XFREE (value); - lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg); - } - - new_value = lt_extend_str (getenv (name), value, 0); - lt_setenv (name, new_value); - XFREE (new_value); - XFREE (name); - XFREE (value); -} - -void -lt_opt_process_env_append (const char *arg) -{ - char *name = NULL; - char *value = NULL; - char *new_value = NULL; - - if (lt_split_name_value (arg, &name, &value) != 0) - { - XFREE (name); - XFREE (value); - lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg); - } - - new_value = lt_extend_str (getenv (name), value, 1); - lt_setenv (name, new_value); - XFREE (new_value); - XFREE (name); - XFREE (value); -} - void lt_update_exe_path (const char *name, const char *value) { - LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n", - (name ? name : "<NULL>"), - (value ? value : "<NULL>"))); + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); if (name && *name && value && *value) { @@ -4011,9 +4919,9 @@ lt_update_exe_path (const char *name, const char *value) void lt_update_lib_path (const char *name, const char *value) { - LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n", - (name ? name : "<NULL>"), - (value ? value : "<NULL>"))); + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); if (name && *name && value && *value) { @@ -4023,11 +4931,152 @@ lt_update_lib_path (const char *name, const char *value) } } +EOF + case $host_os in + mingw*) + cat <<"EOF" + +/* Prepares an argument vector before calling spawn(). + Note that spawn() does not by itself call the command interpreter + (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : + ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); + GetVersionEx(&v); + v.dwPlatformId == VER_PLATFORM_WIN32_NT; + }) ? "cmd.exe" : "command.com"). + Instead it simply concatenates the arguments, separated by ' ', and calls + CreateProcess(). We must quote the arguments since Win32 CreateProcess() + interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a + special way: + - Space and tab are interpreted as delimiters. They are not treated as + delimiters if they are surrounded by double quotes: "...". + - Unescaped double quotes are removed from the input. Their only effect is + that within double quotes, space and tab are treated like normal + characters. + - Backslashes not followed by double quotes are not special. + - But 2*n+1 backslashes followed by a double quote become + n backslashes followed by a double quote (n >= 0): + \" -> " + \\\" -> \" + \\\\\" -> \\" + */ +#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +char ** +prepare_spawn (char **argv) +{ + size_t argc; + char **new_argv; + size_t i; + + /* Count number of arguments. */ + for (argc = 0; argv[argc] != NULL; argc++) + ; + + /* Allocate new argument vector. */ + new_argv = XMALLOC (char *, argc + 1); + + /* Put quoted arguments into the new argument vector. */ + for (i = 0; i < argc; i++) + { + const char *string = argv[i]; + + if (string[0] == '\0') + new_argv[i] = xstrdup ("\"\""); + else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) + { + int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); + size_t length; + unsigned int backslashes; + const char *s; + char *quoted_string; + char *p; + + length = 0; + backslashes = 0; + if (quote_around) + length++; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + length += backslashes + 1; + length++; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + length += backslashes + 1; + quoted_string = XMALLOC (char, length + 1); + + p = quoted_string; + backslashes = 0; + if (quote_around) + *p++ = '"'; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + { + unsigned int j; + for (j = backslashes + 1; j > 0; j--) + *p++ = '\\'; + } + *p++ = c; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + { + unsigned int j; + for (j = backslashes; j > 0; j--) + *p++ = '\\'; + *p++ = '"'; + } + *p = '\0'; + + new_argv[i] = quoted_string; + } + else + new_argv[i] = (char *) string; + } + new_argv[argc] = NULL; + + return new_argv; +} +EOF + ;; + esac + + cat <<"EOF" +void lt_dump_script (FILE* f) +{ +EOF + func_emit_wrapper yes | + $SED -e 's/\([\\"]\)/\\\1/g' \ + -e 's/^/ fputs ("/' -e 's/$/\\n", f);/' + + cat <<"EOF" +} EOF } # end: func_emit_cwrapperexe_src +# func_win32_import_lib_p ARG +# True if ARG is an import lib, as indicated by $file_magic_cmd +func_win32_import_lib_p () +{ + $opt_debug + case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in + *import*) : ;; + *) false ;; + esac +} + # func_mode_link arg... func_mode_link () { @@ -4072,6 +5121,7 @@ func_mode_link () new_inherited_linker_flags= avoid_version=no + bindir= dlfiles= dlprefiles= dlself=no @@ -4164,6 +5214,11 @@ func_mode_link () esac case $prev in + bindir) + bindir="$arg" + prev= + continue + ;; dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. @@ -4195,9 +5250,9 @@ func_mode_link () ;; *) if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" + func_append dlfiles " $arg" else - dlprefiles="$dlprefiles $arg" + func_append dlprefiles " $arg" fi prev= continue @@ -4221,7 +5276,7 @@ func_mode_link () *-*-darwin*) case "$deplibs " in *" $qarg.ltframework "*) ;; - *) deplibs="$deplibs $qarg.ltframework" # this is fixed later + *) func_append deplibs " $qarg.ltframework" # this is fixed later ;; esac ;; @@ -4240,7 +5295,7 @@ func_mode_link () moreargs= for fil in `cat "$save_arg"` do -# moreargs="$moreargs $fil" +# func_append moreargs " $fil" arg=$fil # A libtool-controlled object. @@ -4269,7 +5324,7 @@ func_mode_link () if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" + func_append dlfiles " $pic_object" prev= continue else @@ -4281,7 +5336,7 @@ func_mode_link () # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" + func_append dlprefiles " $pic_object" prev= fi @@ -4351,12 +5406,12 @@ func_mode_link () if test "$prev" = rpath; then case "$rpath " in *" $arg "*) ;; - *) rpath="$rpath $arg" ;; + *) func_append rpath " $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; - *) xrpath="$xrpath $arg" ;; + *) func_append xrpath " $arg" ;; esac fi prev= @@ -4368,28 +5423,28 @@ func_mode_link () continue ;; weak) - weak_libs="$weak_libs $arg" + func_append weak_libs " $arg" prev= continue ;; xcclinker) - linker_flags="$linker_flags $qarg" - compiler_flags="$compiler_flags $qarg" + func_append linker_flags " $qarg" + func_append compiler_flags " $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xcompiler) - compiler_flags="$compiler_flags $qarg" + func_append compiler_flags " $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xlinker) - linker_flags="$linker_flags $qarg" - compiler_flags="$compiler_flags $wl$qarg" + func_append linker_flags " $qarg" + func_append compiler_flags " $wl$qarg" prev= func_append compile_command " $wl$qarg" func_append finalize_command " $wl$qarg" @@ -4425,6 +5480,11 @@ func_mode_link () continue ;; + -bindir) + prev=bindir + continue + ;; + -dlopen) prev=dlfiles continue @@ -4475,15 +5535,16 @@ func_mode_link () ;; -L*) - func_stripname '-L' '' "$arg" - dir=$func_stripname_result - if test -z "$dir"; then + func_stripname "-L" '' "$arg" + if test -z "$func_stripname_result"; then if test "$#" -gt 0; then func_fatal_error "require no space between \`-L' and \`$1'" else func_fatal_error "need path for \`-L' option" fi fi + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; @@ -4495,24 +5556,30 @@ func_mode_link () ;; esac case "$deplibs " in - *" -L$dir "*) ;; + *" -L$dir "* | *" $arg "*) + # Will only happen for absolute or sysroot arguments + ;; *) - deplibs="$deplibs -L$dir" - lib_search_path="$lib_search_path $dir" + # Preserve sysroot, but never include relative directories + case $dir in + [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; + *) func_append deplibs " -L$dir" ;; + esac + func_append lib_search_path " $dir" ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` + testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; ::) dllsearchpath=$dir;; - *) dllsearchpath="$dllsearchpath:$dir";; + *) func_append dllsearchpath ":$dir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; - *) dllsearchpath="$dllsearchpath:$testbindir";; + *) func_append dllsearchpath ":$testbindir";; esac ;; esac @@ -4522,7 +5589,7 @@ func_mode_link () -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) # These systems don't actually have a C or math library (as such) continue ;; @@ -4536,7 +5603,7 @@ func_mode_link () ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework - deplibs="$deplibs System.ltframework" + func_append deplibs " System.ltframework" continue ;; *-*-sco3.2v5* | *-*-sco5v6*) @@ -4556,7 +5623,7 @@ func_mode_link () ;; esac fi - deplibs="$deplibs $arg" + func_append deplibs " $arg" continue ;; @@ -4568,8 +5635,8 @@ func_mode_link () # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. # Darwin uses the -arch flag to determine output architecture. - -model|-arch|-isysroot) - compiler_flags="$compiler_flags $arg" + -model|-arch|-isysroot|--sysroot) + func_append compiler_flags " $arg" func_append compile_command " $arg" func_append finalize_command " $arg" prev=xcompiler @@ -4577,12 +5644,12 @@ func_mode_link () ;; -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) - compiler_flags="$compiler_flags $arg" + func_append compiler_flags " $arg" func_append compile_command " $arg" func_append finalize_command " $arg" case "$new_inherited_linker_flags " in *" $arg "*) ;; - * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; + * ) func_append new_inherited_linker_flags " $arg" ;; esac continue ;; @@ -4649,13 +5716,17 @@ func_mode_link () # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; + =*) + func_stripname '=' '' "$dir" + dir=$lt_sysroot$func_stripname_result + ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac case "$xrpath " in *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; + *) func_append xrpath " $dir" ;; esac continue ;; @@ -4708,8 +5779,8 @@ func_mode_link () for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" - arg="$arg $wl$func_quote_for_eval_result" - compiler_flags="$compiler_flags $func_quote_for_eval_result" + func_append arg " $func_quote_for_eval_result" + func_append compiler_flags " $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" @@ -4724,9 +5795,9 @@ func_mode_link () for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" - arg="$arg $wl$func_quote_for_eval_result" - compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" - linker_flags="$linker_flags $func_quote_for_eval_result" + func_append arg " $wl$func_quote_for_eval_result" + func_append compiler_flags " $wl$func_quote_for_eval_result" + func_append linker_flags " $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" @@ -4754,23 +5825,27 @@ func_mode_link () arg="$func_quote_for_eval_result" ;; - # -64, -mips[0-9] enable 64-bit mode on the SGI compiler - # -r[0-9][0-9]* specifies the processor on the SGI compiler - # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler - # +DA*, +DD* enable 64-bit mode on the HP compiler - # -q* pass through compiler args for the IBM compiler - # -m*, -t[45]*, -txscale* pass through architecture-specific - # compiler args for GCC - # -F/path gives path to uninstalled frameworks, gcc on darwin - # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC - # @file GCC response files + # Flags to be passed through unchanged, with rationale: + # -64, -mips[0-9] enable 64-bit mode for the SGI compiler + # -r[0-9][0-9]* specify processor for the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler + # +DA*, +DD* enable 64-bit mode for the HP compiler + # -q* compiler args for the IBM compiler + # -m*, -t[45]*, -txscale* architecture-specific flags for GCC + # -F/path path to uninstalled frameworks, gcc on darwin + # -p, -pg, --coverage, -fprofile-* profiling flags for GCC + # @file GCC response files + # -tp=* Portland pgcc target processor selection + # --sysroot=* for sysroot support + # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ - -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ + -O*|-flto*|-fwhopr*|-fuse-linker-plugin) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" func_append compile_command " $arg" func_append finalize_command " $arg" - compiler_flags="$compiler_flags $arg" + func_append compiler_flags " $arg" continue ;; @@ -4782,7 +5857,7 @@ func_mode_link () *.$objext) # A standard object. - objs="$objs $arg" + func_append objs " $arg" ;; *.lo) @@ -4813,7 +5888,7 @@ func_mode_link () if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" + func_append dlfiles " $pic_object" prev= continue else @@ -4825,7 +5900,7 @@ func_mode_link () # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" + func_append dlprefiles " $pic_object" prev= fi @@ -4870,24 +5945,25 @@ func_mode_link () *.$libext) # An archive. - deplibs="$deplibs $arg" - old_deplibs="$old_deplibs $arg" + func_append deplibs " $arg" + func_append old_deplibs " $arg" continue ;; *.la) # A libtool-controlled library. + func_resolve_sysroot "$arg" if test "$prev" = dlfiles; then # This library was specified with -dlopen. - dlfiles="$dlfiles $arg" + func_append dlfiles " $func_resolve_sysroot_result" prev= elif test "$prev" = dlprefiles; then # The library was specified with -dlpreopen. - dlprefiles="$dlprefiles $arg" + func_append dlprefiles " $func_resolve_sysroot_result" prev= else - deplibs="$deplibs $arg" + func_append deplibs " $func_resolve_sysroot_result" fi continue ;; @@ -4925,7 +6001,7 @@ func_mode_link () if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` + eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` else shlib_search_path= fi @@ -4934,6 +6010,8 @@ func_mode_link () func_dirname "$output" "/" "" output_objdir="$func_dirname_result$objdir" + func_to_tool_file "$output_objdir/" + tool_output_objdir=$func_to_tool_file_result # Create the object directory. func_mkdir_p "$output_objdir" @@ -4954,12 +6032,12 @@ func_mode_link () # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do - if $opt_duplicate_deps ; then + if $opt_preserve_dup_deps ; then case "$libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi - libs="$libs $deplib" + func_append libs " $deplib" done if test "$linkmode" = lib; then @@ -4972,9 +6050,9 @@ func_mode_link () if $opt_duplicate_compiler_generated_deps; then for pre_post_dep in $predeps $postdeps; do case "$pre_post_deps " in - *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; + *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; esac - pre_post_deps="$pre_post_deps $pre_post_dep" + func_append pre_post_deps " $pre_post_dep" done fi pre_post_deps= @@ -5044,17 +6122,19 @@ func_mode_link () for lib in $dlprefiles; do # Ignore non-libtool-libs dependency_libs= + func_resolve_sysroot "$lib" case $lib in - *.la) func_source "$lib" ;; + *.la) func_source "$func_resolve_sysroot_result" ;; esac # Collect preopened libtool deplibs, except any this library # has declared as weak libs for deplib in $dependency_libs; do - deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` + func_basename "$deplib" + deplib_base=$func_basename_result case " $weak_libs " in *" $deplib_base "*) ;; - *) deplibs="$deplibs $deplib" ;; + *) func_append deplibs " $deplib" ;; esac done done @@ -5075,11 +6155,11 @@ func_mode_link () compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else - compiler_flags="$compiler_flags $deplib" + func_append compiler_flags " $deplib" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; - * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; + * ) func_append new_inherited_linker_flags " $deplib" ;; esac fi fi @@ -5164,7 +6244,7 @@ func_mode_link () if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; - * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; + * ) func_append new_inherited_linker_flags " $deplib" ;; esac fi fi @@ -5177,7 +6257,8 @@ func_mode_link () test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" func_stripname '-L' '' "$deplib" - newlib_search_path="$newlib_search_path $func_stripname_result" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" ;; prog) if test "$pass" = conv; then @@ -5191,7 +6272,8 @@ func_mode_link () finalize_deplibs="$deplib $finalize_deplibs" fi func_stripname '-L' '' "$deplib" - newlib_search_path="$newlib_search_path $func_stripname_result" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" ;; *) func_warning "\`-L' is ignored for archives/objects" @@ -5202,17 +6284,21 @@ func_mode_link () -R*) if test "$pass" = link; then func_stripname '-R' '' "$deplib" - dir=$func_stripname_result + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; + *) func_append xrpath " $dir" ;; esac fi deplibs="$deplib $deplibs" continue ;; - *.la) lib="$deplib" ;; + *.la) + func_resolve_sysroot "$deplib" + lib=$func_resolve_sysroot_result + ;; *.$libext) if test "$pass" = conv; then deplibs="$deplib $deplibs" @@ -5230,7 +6316,7 @@ func_mode_link () match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` - if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ + if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then valid_a_lib=yes fi @@ -5240,15 +6326,15 @@ func_mode_link () ;; esac if test "$valid_a_lib" != yes; then - $ECHO + echo $ECHO "*** Warning: Trying to link with static lib archive $deplib." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have" - $ECHO "*** because the file extensions .$libext of this argument makes me believe" - $ECHO "*** that it is just a static archive that I should not use here." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because the file extensions .$libext of this argument makes me believe" + echo "*** that it is just a static archive that I should not use here." else - $ECHO + echo $ECHO "*** Warning: Linking the shared library $output against the" $ECHO "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" @@ -5275,11 +6361,11 @@ func_mode_link () if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlopen support or we're linking statically, # we need to preload. - newdlprefiles="$newdlprefiles $deplib" + func_append newdlprefiles " $deplib" compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else - newdlfiles="$newdlfiles $deplib" + func_append newdlfiles " $deplib" fi fi continue @@ -5321,20 +6407,20 @@ func_mode_link () # Convert "-framework foo" to "foo.ltframework" if test -n "$inherited_linker_flags"; then - tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` + tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do case " $new_inherited_linker_flags " in *" $tmp_inherited_linker_flag "*) ;; - *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; + *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; esac done fi - dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || { test "$linkmode" != prog && test "$linkmode" != lib; }; then - test -n "$dlopen" && dlfiles="$dlfiles $dlopen" - test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" + test -n "$dlopen" && func_append dlfiles " $dlopen" + test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" fi if test "$pass" = conv; then @@ -5345,17 +6431,17 @@ func_mode_link () func_fatal_error "cannot find name of link library for \`$lib'" fi # It is a libtool convenience library, so add in its objects. - convenience="$convenience $ladir/$objdir/$old_library" - old_convenience="$old_convenience $ladir/$objdir/$old_library" + func_append convenience " $ladir/$objdir/$old_library" + func_append old_convenience " $ladir/$objdir/$old_library" tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" - if $opt_duplicate_deps ; then + if $opt_preserve_dup_deps ; then case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi - tmp_libs="$tmp_libs $deplib" + func_append tmp_libs " $deplib" done elif test "$linkmode" != prog && test "$linkmode" != lib; then func_fatal_error "\`$lib' is not a convenience library" @@ -5366,9 +6452,15 @@ func_mode_link () # Get the name of the library we link against. linklib= - for l in $old_library $library_names; do - linklib="$l" - done + if test -n "$old_library" && + { test "$prefer_static_libs" = yes || + test "$prefer_static_libs,$installed" = "built,no"; }; then + linklib=$old_library + else + for l in $old_library $library_names; do + linklib="$l" + done + fi if test -z "$linklib"; then func_fatal_error "cannot find name of link library for \`$lib'" fi @@ -5385,9 +6477,9 @@ func_mode_link () # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't # bomb out in the load deplibs phase. - dlprefiles="$dlprefiles $lib $dependency_libs" + func_append dlprefiles " $lib $dependency_libs" else - newdlfiles="$newdlfiles $lib" + func_append newdlfiles " $lib" fi continue fi # $pass = dlopen @@ -5409,14 +6501,14 @@ func_mode_link () # Find the relevant object directory and library name. if test "X$installed" = Xyes; then - if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then func_warning "library \`$lib' was moved." dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" else - dir="$libdir" - absdir="$libdir" + dir="$lt_sysroot$libdir" + absdir="$lt_sysroot$libdir" fi test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes else @@ -5424,12 +6516,12 @@ func_mode_link () dir="$ladir" absdir="$abs_ladir" # Remove this search path later - notinst_path="$notinst_path $abs_ladir" + func_append notinst_path " $abs_ladir" else dir="$ladir/$objdir" absdir="$abs_ladir/$objdir" # Remove this search path later - notinst_path="$notinst_path $abs_ladir" + func_append notinst_path " $abs_ladir" fi fi # $installed = yes func_stripname 'lib' '.la' "$laname" @@ -5440,20 +6532,46 @@ func_mode_link () if test -z "$libdir" && test "$linkmode" = prog; then func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" fi - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - newdlprefiles="$newdlprefiles $dir/$old_library" - # Keep a list of preopened convenience libraries to check - # that they are being used correctly in the link pass. - test -z "$libdir" && \ - dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" - # Otherwise, use the dlname, so that lt_dlopen finds it. - elif test -n "$dlname"; then - newdlprefiles="$newdlprefiles $dir/$dlname" - else - newdlprefiles="$newdlprefiles $dir/$linklib" - fi + case "$host" in + # special handling for platforms with PE-DLLs. + *cygwin* | *mingw* | *cegcc* ) + # Linker will automatically link against shared library if both + # static and shared are present. Therefore, ensure we extract + # symbols from the import library if a shared library is present + # (otherwise, the dlopen module name will be incorrect). We do + # this by putting the import library name into $newdlprefiles. + # We recover the dlopen module name by 'saving' the la file + # name in a special purpose variable, and (later) extracting the + # dlname from the la file. + if test -n "$dlname"; then + func_tr_sh "$dir/$linklib" + eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" + func_append newdlprefiles " $dir/$linklib" + else + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + fi + ;; + * ) + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + func_append newdlprefiles " $dir/$dlname" + else + func_append newdlprefiles " $dir/$linklib" + fi + ;; + esac fi # $pass = dlpreopen if test -z "$libdir"; then @@ -5471,7 +6589,7 @@ func_mode_link () if test "$linkmode" = prog && test "$pass" != link; then - newlib_search_path="$newlib_search_path $ladir" + func_append newlib_search_path " $ladir" deplibs="$lib $deplibs" linkalldeplibs=no @@ -5484,7 +6602,8 @@ func_mode_link () for deplib in $dependency_libs; do case $deplib in -L*) func_stripname '-L' '' "$deplib" - newlib_search_path="$newlib_search_path $func_stripname_result" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" ;; esac # Need to link against all dependency_libs? @@ -5495,12 +6614,12 @@ func_mode_link () # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi - if $opt_duplicate_deps ; then + if $opt_preserve_dup_deps ; then case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi - tmp_libs="$tmp_libs $deplib" + func_append tmp_libs " $deplib" done # for deplib continue fi # $linkmode = prog... @@ -5515,7 +6634,7 @@ func_mode_link () # Make sure the rpath contains only unique directories. case "$temp_rpath:" in *"$absdir:"*) ;; - *) temp_rpath="$temp_rpath$absdir:" ;; + *) func_append temp_rpath "$absdir:" ;; esac fi @@ -5527,7 +6646,7 @@ func_mode_link () *) case "$compile_rpath " in *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" + *) func_append compile_rpath " $absdir" ;; esac ;; esac @@ -5536,7 +6655,7 @@ func_mode_link () *) case "$finalize_rpath " in *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" + *) func_append finalize_rpath " $libdir" ;; esac ;; esac @@ -5561,12 +6680,12 @@ func_mode_link () case $host in *cygwin* | *mingw* | *cegcc*) # No point in relinking DLLs because paths are not encoded - notinst_deplibs="$notinst_deplibs $lib" + func_append notinst_deplibs " $lib" need_relink=no ;; *) if test "$installed" = no; then - notinst_deplibs="$notinst_deplibs $lib" + func_append notinst_deplibs " $lib" need_relink=yes fi ;; @@ -5583,7 +6702,7 @@ func_mode_link () fi done if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then - $ECHO + echo if test "$linkmode" = prog; then $ECHO "*** Warning: Linking the executable $output against the loadable module" else @@ -5601,7 +6720,7 @@ func_mode_link () *) case "$compile_rpath " in *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" + *) func_append compile_rpath " $absdir" ;; esac ;; esac @@ -5610,7 +6729,7 @@ func_mode_link () *) case "$finalize_rpath " in *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" + *) func_append finalize_rpath " $libdir" ;; esac ;; esac @@ -5664,7 +6783,7 @@ func_mode_link () linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" - if test "$linkmode" = prog || test "$mode" != relink; then + if test "$linkmode" = prog || test "$opt_mode" != relink; then add_shlibpath= add_dir= add= @@ -5686,9 +6805,9 @@ func_mode_link () if test "X$dlopenmodule" != "X$lib"; then $ECHO "*** Warning: lib $linklib is a module, not a shared library" if test -z "$old_library" ; then - $ECHO - $ECHO "*** And there doesn't seem to be a static archive available" - $ECHO "*** The link will probably fail, sorry" + echo + echo "*** And there doesn't seem to be a static archive available" + echo "*** The link will probably fail, sorry" else add="$dir/$old_library" fi @@ -5720,7 +6839,7 @@ func_mode_link () if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) - add_dir="$add_dir -L$inst_prefix_dir$libdir" + func_append add_dir " -L$inst_prefix_dir$libdir" ;; esac fi @@ -5742,7 +6861,7 @@ func_mode_link () if test -n "$add_shlibpath"; then case :$compile_shlibpath: in *":$add_shlibpath:"*) ;; - *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; + *) func_append compile_shlibpath "$add_shlibpath:" ;; esac fi if test "$linkmode" = prog; then @@ -5756,13 +6875,13 @@ func_mode_link () test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + *) func_append finalize_shlibpath "$libdir:" ;; esac fi fi fi - if test "$linkmode" = prog || test "$mode" = relink; then + if test "$linkmode" = prog || test "$opt_mode" = relink; then add_shlibpath= add_dir= add= @@ -5776,7 +6895,7 @@ func_mode_link () elif test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + *) func_append finalize_shlibpath "$libdir:" ;; esac add="-l$name" elif test "$hardcode_automatic" = yes; then @@ -5793,7 +6912,7 @@ func_mode_link () if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) - add_dir="$add_dir -L$inst_prefix_dir$libdir" + func_append add_dir " -L$inst_prefix_dir$libdir" ;; esac fi @@ -5828,21 +6947,21 @@ func_mode_link () # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. - $ECHO + echo $ECHO "*** Warning: This system can not link to static lib archive $lib." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then - $ECHO "*** But as you try to build a module library, libtool will still create " - $ECHO "*** a static module, that should work as long as the dlopening application" - $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." + echo "*** But as you try to build a module library, libtool will still create " + echo "*** a static module, that should work as long as the dlopening application" + echo "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then - $ECHO - $ECHO "*** However, this would only work if libtool was able to extract symbol" - $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" - $ECHO "*** not find such a program. So, this module is probably useless." - $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module @@ -5870,27 +6989,33 @@ func_mode_link () temp_xrpath=$func_stripname_result case " $xrpath " in *" $temp_xrpath "*) ;; - *) xrpath="$xrpath $temp_xrpath";; + *) func_append xrpath " $temp_xrpath";; esac;; - *) temp_deplibs="$temp_deplibs $libdir";; + *) func_append temp_deplibs " $libdir";; esac done dependency_libs="$temp_deplibs" fi - newlib_search_path="$newlib_search_path $absdir" + func_append newlib_search_path " $absdir" # Link against this library test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" - if $opt_duplicate_deps ; then + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result";; + *) func_resolve_sysroot "$deplib" ;; + esac + if $opt_preserve_dup_deps ; then case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + *" $func_resolve_sysroot_result "*) + func_append specialdeplibs " $func_resolve_sysroot_result" ;; esac fi - tmp_libs="$tmp_libs $deplib" + func_append tmp_libs " $func_resolve_sysroot_result" done if test "$link_all_deplibs" != no; then @@ -5900,8 +7025,10 @@ func_mode_link () case $deplib in -L*) path="$deplib" ;; *.la) + func_resolve_sysroot "$deplib" + deplib=$func_resolve_sysroot_result func_dirname "$deplib" "" "." - dir="$func_dirname_result" + dir=$func_dirname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; @@ -5928,8 +7055,8 @@ func_mode_link () if test -z "$darwin_install_name"; then darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` fi - compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" - linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" + func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" + func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" path= fi fi @@ -5962,7 +7089,7 @@ func_mode_link () compile_deplibs="$new_inherited_linker_flags $compile_deplibs" finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" else - compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` fi fi dependency_libs="$newdependency_libs" @@ -5979,7 +7106,7 @@ func_mode_link () for dir in $newlib_search_path; do case "$lib_search_path " in *" $dir "*) ;; - *) lib_search_path="$lib_search_path $dir" ;; + *) func_append lib_search_path " $dir" ;; esac done newlib_search_path= @@ -6037,10 +7164,10 @@ func_mode_link () -L*) case " $tmp_libs " in *" $deplib "*) ;; - *) tmp_libs="$tmp_libs $deplib" ;; + *) func_append tmp_libs " $deplib" ;; esac ;; - *) tmp_libs="$tmp_libs $deplib" ;; + *) func_append tmp_libs " $deplib" ;; esac done eval $var=\"$tmp_libs\" @@ -6056,7 +7183,7 @@ func_mode_link () ;; esac if test -n "$i" ; then - tmp_libs="$tmp_libs $i" + func_append tmp_libs " $i" fi done dependency_libs=$tmp_libs @@ -6097,7 +7224,7 @@ func_mode_link () # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" - objs="$objs$old_deplibs" + func_append objs "$old_deplibs" ;; lib) @@ -6130,10 +7257,10 @@ func_mode_link () if test "$deplibs_check_method" != pass_all; then func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" else - $ECHO + echo $ECHO "*** Warning: Linking the shared library $output against the non-libtool" $ECHO "*** objects $objs is not portable!" - libobjs="$libobjs $objs" + func_append libobjs " $objs" fi fi @@ -6198,7 +7325,7 @@ func_mode_link () age="$number_minor" revision="$number_revision" ;; - freebsd-aout|freebsd-elf|sunos) + freebsd-aout|freebsd-elf|qnx|sunos) current="$number_major" revision="$number_minor" age="0" @@ -6334,7 +7461,7 @@ func_mode_link () done # Make executables depend on our current version. - verstring="$verstring:${current}.0" + func_append verstring ":${current}.0" ;; qnx) @@ -6402,10 +7529,10 @@ func_mode_link () fi func_generate_dlsyms "$libname" "$libname" "yes" - libobjs="$libobjs $symfileobj" + func_append libobjs " $symfileobj" test "X$libobjs" = "X " && libobjs= - if test "$mode" != relink; then + if test "$opt_mode" != relink; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= @@ -6421,7 +7548,7 @@ func_mode_link () continue fi fi - removelist="$removelist $p" + func_append removelist " $p" ;; *) ;; esac @@ -6432,27 +7559,28 @@ func_mode_link () # Now set the variables for building old libraries. if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then - oldlibs="$oldlibs $output_objdir/$libname.$libext" + func_append oldlibs " $output_objdir/$libname.$libext" # Transform .lo files to .o files. - oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` + oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` fi # Eliminate all temporary directories. #for path in $notinst_path; do - # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` - # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` - # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` + # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` + # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` + # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` #done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. temp_xrpath= for libdir in $xrpath; do - temp_xrpath="$temp_xrpath -R$libdir" + func_replace_sysroot "$libdir" + func_append temp_xrpath " -R$func_replace_sysroot_result" case "$finalize_rpath " in *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; + *) func_append finalize_rpath " $libdir" ;; esac done if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then @@ -6466,7 +7594,7 @@ func_mode_link () for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in *" $lib "*) ;; - *) dlfiles="$dlfiles $lib" ;; + *) func_append dlfiles " $lib" ;; esac done @@ -6476,19 +7604,19 @@ func_mode_link () for lib in $old_dlprefiles; do case "$dlprefiles " in *" $lib "*) ;; - *) dlprefiles="$dlprefiles $lib" ;; + *) func_append dlprefiles " $lib" ;; esac done if test "$build_libtool_libs" = yes; then if test -n "$rpath"; then case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework - deplibs="$deplibs System.ltframework" + func_append deplibs " System.ltframework" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. @@ -6505,7 +7633,7 @@ func_mode_link () *) # Add libc to deplibs on all other systems if necessary. if test "$build_libtool_need_lc" = "yes"; then - deplibs="$deplibs -lc" + func_append deplibs " -lc" fi ;; esac @@ -6554,7 +7682,7 @@ EOF if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $i "*) - newdeplibs="$newdeplibs $i" + func_append newdeplibs " $i" i="" ;; esac @@ -6565,21 +7693,21 @@ EOF set dummy $deplib_matches; shift deplib_match=$1 if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then - newdeplibs="$newdeplibs $i" + func_append newdeplibs " $i" else droppeddeps=yes - $ECHO + echo $ECHO "*** Warning: dynamic linker does not accept needed library $i." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which I believe you do not have" - $ECHO "*** because a test_compile did reveal that the linker did not use it for" - $ECHO "*** its dynamic dependency list that programs get resolved with at runtime." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which I believe you do not have" + echo "*** because a test_compile did reveal that the linker did not use it for" + echo "*** its dynamic dependency list that programs get resolved with at runtime." fi fi ;; *) - newdeplibs="$newdeplibs $i" + func_append newdeplibs " $i" ;; esac done @@ -6597,7 +7725,7 @@ EOF if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $i "*) - newdeplibs="$newdeplibs $i" + func_append newdeplibs " $i" i="" ;; esac @@ -6608,29 +7736,29 @@ EOF set dummy $deplib_matches; shift deplib_match=$1 if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then - newdeplibs="$newdeplibs $i" + func_append newdeplibs " $i" else droppeddeps=yes - $ECHO + echo $ECHO "*** Warning: dynamic linker does not accept needed library $i." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have" - $ECHO "*** because a test_compile did reveal that the linker did not use this one" - $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because a test_compile did reveal that the linker did not use this one" + echo "*** as a dynamic dependency that programs can get resolved with at runtime." fi fi else droppeddeps=yes - $ECHO + echo $ECHO "*** Warning! Library $i is needed by this library but I was not able to" - $ECHO "*** make it link in! You will probably need to install it or some" - $ECHO "*** library that it depends on before this library will be fully" - $ECHO "*** functional. Installing it before continuing would be even better." + echo "*** make it link in! You will probably need to install it or some" + echo "*** library that it depends on before this library will be fully" + echo "*** functional. Installing it before continuing would be even better." fi ;; *) - newdeplibs="$newdeplibs $i" + func_append newdeplibs " $i" ;; esac done @@ -6647,15 +7775,27 @@ EOF if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) - newdeplibs="$newdeplibs $a_deplib" + func_append newdeplibs " $a_deplib" a_deplib="" ;; esac fi if test -n "$a_deplib" ; then libname=`eval "\\$ECHO \"$libname_spec\""` + if test -n "$file_magic_glob"; then + libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob` + else + libnameglob=$libname + fi + test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + if test "$want_nocaseglob" = yes; then + shopt -s nocaseglob + potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` + $nocaseglob + else + potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` + fi for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null | @@ -6672,13 +7812,13 @@ EOF potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; - *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; + *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | $SED -e 10q | $EGREP "$file_magic_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" + func_append newdeplibs " $a_deplib" a_deplib="" break 2 fi @@ -6687,12 +7827,12 @@ EOF fi if test -n "$a_deplib" ; then droppeddeps=yes - $ECHO + echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have" - $ECHO "*** because I did check the linker path looking for a file starting" + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for file magic test)" else @@ -6703,7 +7843,7 @@ EOF ;; *) # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" + func_append newdeplibs " $a_deplib" ;; esac done # Gone through all deplibs. @@ -6719,7 +7859,7 @@ EOF if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) - newdeplibs="$newdeplibs $a_deplib" + func_append newdeplibs " $a_deplib" a_deplib="" ;; esac @@ -6730,9 +7870,9 @@ EOF potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do potlib="$potent_lib" # see symlink-check above in file_magic test - if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ + if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ $EGREP "$match_pattern_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" + func_append newdeplibs " $a_deplib" a_deplib="" break 2 fi @@ -6741,12 +7881,12 @@ EOF fi if test -n "$a_deplib" ; then droppeddeps=yes - $ECHO + echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have" - $ECHO "*** because I did check the linker path looking for a file starting" + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" else @@ -6757,32 +7897,32 @@ EOF ;; *) # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" + func_append newdeplibs " $a_deplib" ;; esac done # Gone through all deplibs. ;; none | unknown | *) newdeplibs="" - tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ - -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` + tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then for i in $predeps $postdeps ; do # can't use Xsed below, because $i might contain '/' - tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` + tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` done fi - if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | - $GREP . >/dev/null; then - $ECHO + case $tmp_deplibs in + *[!\ \ ]*) + echo if test "X$deplibs_check_method" = "Xnone"; then - $ECHO "*** Warning: inter-library dependencies are not supported in this platform." + echo "*** Warning: inter-library dependencies are not supported in this platform." else - $ECHO "*** Warning: inter-library dependencies are not known to be supported." + echo "*** Warning: inter-library dependencies are not known to be supported." fi - $ECHO "*** All declared inter-library dependencies are being dropped." + echo "*** All declared inter-library dependencies are being dropped." droppeddeps=yes - fi + ;; + esac ;; esac versuffix=$versuffix_save @@ -6794,23 +7934,23 @@ EOF case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library with the System framework - newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` ;; esac if test "$droppeddeps" = yes; then if test "$module" = yes; then - $ECHO - $ECHO "*** Warning: libtool could not satisfy all declared inter-library" + echo + echo "*** Warning: libtool could not satisfy all declared inter-library" $ECHO "*** dependencies of module $libname. Therefore, libtool will create" - $ECHO "*** a static module, that should work as long as the dlopening" - $ECHO "*** application is linked with the -dlopen flag." + echo "*** a static module, that should work as long as the dlopening" + echo "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then - $ECHO - $ECHO "*** However, this would only work if libtool was able to extract symbol" - $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" - $ECHO "*** not find such a program. So, this module is probably useless." - $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" @@ -6820,16 +7960,16 @@ EOF build_libtool_libs=no fi else - $ECHO "*** The inter-library dependencies that have been dropped here will be" - $ECHO "*** automatically added whenever a program is linked with this library" - $ECHO "*** or is declared to -dlopen it." + echo "*** The inter-library dependencies that have been dropped here will be" + echo "*** automatically added whenever a program is linked with this library" + echo "*** or is declared to -dlopen it." if test "$allow_undefined" = no; then - $ECHO - $ECHO "*** Since this library must not contain undefined symbols," - $ECHO "*** because either the platform does not support them or" - $ECHO "*** it was explicitly requested with -no-undefined," - $ECHO "*** libtool will only create a static version of it." + echo + echo "*** Since this library must not contain undefined symbols," + echo "*** because either the platform does not support them or" + echo "*** it was explicitly requested with -no-undefined," + echo "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module @@ -6846,9 +7986,9 @@ EOF # Time to change all our "foo.ltframework" stuff back to "-framework foo" case $host in *-*-darwin*) - newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac @@ -6861,7 +8001,7 @@ EOF *) case " $deplibs " in *" -L$path/$objdir "*) - new_libs="$new_libs -L$path/$objdir" ;; + func_append new_libs " -L$path/$objdir" ;; esac ;; esac @@ -6871,10 +8011,10 @@ EOF -L*) case " $new_libs " in *" $deplib "*) ;; - *) new_libs="$new_libs $deplib" ;; + *) func_append new_libs " $deplib" ;; esac ;; - *) new_libs="$new_libs $deplib" ;; + *) func_append new_libs " $deplib" ;; esac done deplibs="$new_libs" @@ -6891,10 +8031,12 @@ EOF hardcode_libdirs= dep_rpath= rpath="$finalize_rpath" - test "$mode" != relink && rpath="$compile_rpath$rpath" + test "$opt_mode" != relink && rpath="$compile_rpath$rpath" for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then + func_replace_sysroot "$libdir" + libdir=$func_replace_sysroot_result if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else @@ -6903,18 +8045,18 @@ EOF *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" - dep_rpath="$dep_rpath $flag" + func_append dep_rpath " $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; + *) func_apped perm_rpath " $libdir" ;; esac fi done @@ -6932,7 +8074,7 @@ EOF # We should set the runpath_var. rpath= for dir in $perm_rpath; do - rpath="$rpath$dir:" + func_append rpath "$dir:" done eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" fi @@ -6940,7 +8082,7 @@ EOF fi shlibpath="$finalize_shlibpath" - test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi @@ -6966,18 +8108,18 @@ EOF linknames= for link do - linknames="$linknames $link" + func_append linknames " $link" done # Use standard objects if they are pic - test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` test "X$libobjs" = "X " && libobjs= delfiles= if test -n "$export_symbols" && test -n "$include_expsyms"; then $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" export_symbols="$output_objdir/$libname.uexp" - delfiles="$delfiles $export_symbols" + func_append delfiles " $export_symbols" fi orig_export_symbols= @@ -7008,13 +8150,45 @@ EOF $opt_dry_run || $RM $export_symbols cmds=$export_symbols_cmds save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do + for cmd1 in $cmds; do IFS="$save_ifs" - eval cmd=\"$cmd\" - func_len " $cmd" - len=$func_len_result - if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + # Take the normal branch if the nm_file_list_spec branch + # doesn't work or if tool conversion is not needed. + case $nm_file_list_spec~$to_tool_file_cmd in + *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) + try_normal_branch=yes + eval cmd=\"$cmd1\" + func_len " $cmd" + len=$func_len_result + ;; + *) + try_normal_branch=no + ;; + esac + if test "$try_normal_branch" = yes \ + && { test "$len" -lt "$max_cmd_len" \ + || test "$max_cmd_len" -le -1; } + then + func_show_eval "$cmd" 'exit $?' + skipped_export=false + elif test -n "$nm_file_list_spec"; then + func_basename "$output" + output_la=$func_basename_result + save_libobjs=$libobjs + save_output=$output + output=${output_objdir}/${output_la}.nm + func_to_tool_file "$output" + libobjs=$nm_file_list_spec$func_to_tool_file_result + func_append delfiles " $output" + func_verbose "creating $NM input file list: $output" + for obj in $save_libobjs; do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > "$output" + eval cmd=\"$cmd1\" func_show_eval "$cmd" 'exit $?' + output=$save_output + libobjs=$save_libobjs skipped_export=false else # The command line is too long to execute in one step. @@ -7036,7 +8210,7 @@ EOF if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" - $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then @@ -7048,7 +8222,7 @@ EOF # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" + func_append delfiles " $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi @@ -7058,7 +8232,7 @@ EOF case " $convenience " in *" $test_deplib "*) ;; *) - tmp_deplibs="$tmp_deplibs $test_deplib" + func_append tmp_deplibs " $test_deplib" ;; esac done @@ -7078,21 +8252,21 @@ EOF test "X$libobjs" = "X " && libobjs= else gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" + func_append generated " $gentop" func_extract_archives $gentop $convenience - libobjs="$libobjs $func_extract_archives_result" + func_append libobjs " $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi fi if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" - linker_flags="$linker_flags $flag" + func_append linker_flags " $flag" fi # Make a backup of the uninstalled library when relinking - if test "$mode" = relink; then + if test "$opt_mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? fi @@ -7137,7 +8311,8 @@ EOF save_libobjs=$libobjs fi save_output=$output - output_la=`$ECHO "X$output" | $Xsed -e "$basename"` + func_basename "$output" + output_la=$func_basename_result # Clear the reloadable object creation command queue and # initialize k to one. @@ -7150,13 +8325,16 @@ EOF if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then output=${output_objdir}/${output_la}.lnkscript func_verbose "creating GNU ld script: $output" - $ECHO 'INPUT (' > $output + echo 'INPUT (' > $output for obj in $save_libobjs do - $ECHO "$obj" >> $output + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output done - $ECHO ')' >> $output - delfiles="$delfiles $output" + echo ')' >> $output + func_append delfiles " $output" + func_to_tool_file "$output" + output=$func_to_tool_file_result elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then output=${output_objdir}/${output_la}.lnk func_verbose "creating linker input file list: $output" @@ -7170,10 +8348,12 @@ EOF fi for obj do - $ECHO "$obj" >> $output + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output done - delfiles="$delfiles $output" - output=$firstobj\"$file_list_spec$output\" + func_append delfiles " $output" + func_to_tool_file "$output" + output=$firstobj\"$file_list_spec$func_to_tool_file_result\" else if test -n "$save_libobjs"; then func_verbose "creating reloadable object files..." @@ -7197,17 +8377,19 @@ EOF # command to the queue. if test "$k" -eq 1 ; then # The first file doesn't have a previous command to add. - eval concat_cmds=\"$reload_cmds $objlist $last_robj\" + reload_objs=$objlist + eval concat_cmds=\"$reload_cmds\" else # All subsequent reloadable object files will link in # the last one created. - eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\" + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" fi last_robj=$output_objdir/$output_la-${k}.$objext func_arith $k + 1 k=$func_arith_result output=$output_objdir/$output_la-${k}.$objext - objlist=$obj + objlist=" $obj" func_len " $last_robj" func_arith $len0 + $func_len_result len=$func_arith_result @@ -7217,11 +8399,12 @@ EOF # reloadable object file. All subsequent reloadable object # files will link in the last one created. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\${concat_cmds}$reload_cmds\" if test -n "$last_robj"; then eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" fi - delfiles="$delfiles $output" + func_append delfiles " $output" else output= @@ -7255,7 +8438,7 @@ EOF lt_exit=$? # Restore the uninstalled library and exit - if test "$mode" = relink; then + if test "$opt_mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) @@ -7276,7 +8459,7 @@ EOF if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" - $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi if test -n "$orig_export_symbols"; then @@ -7288,7 +8471,7 @@ EOF # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" + func_append delfiles " $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi @@ -7329,10 +8512,10 @@ EOF # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" + func_append generated " $gentop" func_extract_archives $gentop $dlprefiles - libobjs="$libobjs $func_extract_archives_result" + func_append libobjs " $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi @@ -7348,7 +8531,7 @@ EOF lt_exit=$? # Restore the uninstalled library and exit - if test "$mode" = relink; then + if test "$opt_mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) @@ -7360,7 +8543,7 @@ EOF IFS="$save_ifs" # Restore the uninstalled library and exit - if test "$mode" = relink; then + if test "$opt_mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? if test -n "$convenience"; then @@ -7441,18 +8624,21 @@ EOF if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" - reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` + reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` else gentop="$output_objdir/${obj}x" - generated="$generated $gentop" + func_append generated " $gentop" func_extract_archives $gentop $convenience reload_conv_objs="$reload_objs $func_extract_archives_result" fi fi + # If we're not building shared, we need to use non_pic_objs + test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" + # Create the old-style object. - reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" func_execute_cmds "$reload_cmds" 'exit $?' @@ -7512,8 +8698,8 @@ EOF case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework - compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` - finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` ;; esac @@ -7524,14 +8710,14 @@ EOF if test "$tagname" = CXX ; then case ${MACOSX_DEPLOYMENT_TARGET-10.0} in 10.[0123]) - compile_command="$compile_command ${wl}-bind_at_load" - finalize_command="$finalize_command ${wl}-bind_at_load" + func_append compile_command " ${wl}-bind_at_load" + func_append finalize_command " ${wl}-bind_at_load" ;; esac fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" - compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac @@ -7545,7 +8731,7 @@ EOF *) case " $compile_deplibs " in *" -L$path/$objdir "*) - new_libs="$new_libs -L$path/$objdir" ;; + func_append new_libs " -L$path/$objdir" ;; esac ;; esac @@ -7555,17 +8741,17 @@ EOF -L*) case " $new_libs " in *" $deplib "*) ;; - *) new_libs="$new_libs $deplib" ;; + *) func_append new_libs " $deplib" ;; esac ;; - *) new_libs="$new_libs $deplib" ;; + *) func_append new_libs " $deplib" ;; esac done compile_deplibs="$new_libs" - compile_command="$compile_command $compile_deplibs" - finalize_command="$finalize_command $finalize_deplibs" + func_append compile_command " $compile_deplibs" + func_append finalize_command " $finalize_deplibs" if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. @@ -7573,7 +8759,7 @@ EOF # This is the magic to use -rpath. case "$finalize_rpath " in *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; + *) func_append finalize_rpath " $libdir" ;; esac done fi @@ -7592,18 +8778,18 @@ EOF *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" + func_append rpath " $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; + *) func_append perm_rpath " $libdir" ;; esac fi case $host in @@ -7612,12 +8798,12 @@ EOF case :$dllsearchpath: in *":$libdir:"*) ;; ::) dllsearchpath=$libdir;; - *) dllsearchpath="$dllsearchpath:$libdir";; + *) func_append dllsearchpath ":$libdir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; - *) dllsearchpath="$dllsearchpath:$testbindir";; + *) func_append dllsearchpath ":$testbindir";; esac ;; esac @@ -7643,18 +8829,18 @@ EOF *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" + func_append rpath " $flag" fi elif test -n "$runpath_var"; then case "$finalize_perm_rpath " in *" $libdir "*) ;; - *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; + *) func_append finalize_perm_rpath " $libdir" ;; esac fi done @@ -7668,8 +8854,8 @@ EOF if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. - compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` fi func_generate_dlsyms "$outputname" "@PROGRAM@" "no" @@ -7681,15 +8867,15 @@ EOF wrappers_required=yes case $host in + *cegcc* | *mingw32ce*) + # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. + wrappers_required=no + ;; *cygwin* | *mingw* ) if test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; - *cegcc) - # Disable wrappers for cegcc, we are cross compiling anyway. - wrappers_required=no - ;; *) if test "$need_relink" = no || test "$build_libtool_libs" != yes; then wrappers_required=no @@ -7698,13 +8884,19 @@ EOF esac if test "$wrappers_required" = no; then # Replace the output file specification. - compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. exit_status=0 func_show_eval "$link_command" 'exit_status=$?' + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + # Delete the generated files. if test -f "$output_objdir/${outputname}S.${objext}"; then func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' @@ -7727,7 +8919,7 @@ EOF # We should set the runpath_var. rpath= for dir in $perm_rpath; do - rpath="$rpath$dir:" + func_append rpath "$dir:" done compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi @@ -7735,7 +8927,7 @@ EOF # We should set the runpath_var. rpath= for dir in $finalize_perm_rpath; do - rpath="$rpath$dir:" + func_append rpath "$dir:" done finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi @@ -7745,11 +8937,18 @@ EOF # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. - link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. $opt_dry_run || $RM $output # Link the executable and exit func_show_eval "$link_command" 'exit $?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + exit $EXIT_SUCCESS fi @@ -7764,7 +8963,7 @@ EOF if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then - relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` + relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` else # fast_install is set to needless relink_command= @@ -7776,13 +8975,19 @@ EOF fi # Replace the output file specification. - link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname func_show_eval "$link_command" 'exit $?' + if test -n "$postlink_cmds"; then + func_to_tool_file "$output_objdir/$outputname" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + # Now create the wrapper script. func_verbose "creating $output" @@ -7800,18 +9005,7 @@ EOF fi done relink_command="(cd `pwd`; $relink_command)" - relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` - fi - - # Quote $ECHO for shipping. - if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then - case $progpath in - [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; - *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; - esac - qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` - else - qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` fi # Only actually do things if not in dry run mode. @@ -7891,7 +9085,7 @@ EOF else oldobjs="$old_deplibs $non_pic_objects" if test "$preload" = yes && test -f "$symfileobj"; then - oldobjs="$oldobjs $symfileobj" + func_append oldobjs " $symfileobj" fi fi addlibs="$old_convenience" @@ -7899,10 +9093,10 @@ EOF if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" + func_append generated " $gentop" func_extract_archives $gentop $addlibs - oldobjs="$oldobjs $func_extract_archives_result" + func_append oldobjs " $func_extract_archives_result" fi # Do each command in the archive commands. @@ -7913,10 +9107,10 @@ EOF # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" + func_append generated " $gentop" func_extract_archives $gentop $dlprefiles - oldobjs="$oldobjs $func_extract_archives_result" + func_append oldobjs " $func_extract_archives_result" fi # POSIX demands no paths to be encoded in archives. We have @@ -7932,9 +9126,9 @@ EOF done | sort | sort -uc >/dev/null 2>&1); then : else - $ECHO "copying selected object files to avoid basename conflicts..." + echo "copying selected object files to avoid basename conflicts..." gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" + func_append generated " $gentop" func_mkdir_p "$gentop" save_oldobjs=$oldobjs oldobjs= @@ -7958,9 +9152,9 @@ EOF esac done func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" - oldobjs="$oldobjs $gentop/$newobj" + func_append oldobjs " $gentop/$newobj" ;; - *) oldobjs="$oldobjs $obj" ;; + *) func_append oldobjs " $obj" ;; esac done fi @@ -7970,6 +9164,16 @@ EOF len=$func_len_result if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then cmds=$old_archive_cmds + elif test -n "$archiver_list_spec"; then + func_verbose "using command file archive linking..." + for obj in $oldobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > $output_objdir/$libname.libcmd + func_to_tool_file "$output_objdir/$libname.libcmd" + oldobjs=" $archiver_list_spec$func_to_tool_file_result" + cmds=$old_archive_cmds else # the command line is too long to link in one step, link in parts func_verbose "using piecewise archive linking..." @@ -8043,7 +9247,7 @@ EOF done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" - relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` if test "$hardcode_automatic" = yes ; then relink_command= fi @@ -8066,9 +9270,19 @@ EOF eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" - newdependency_libs="$newdependency_libs $libdir/$name" + func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" + ;; + -L*) + func_stripname -L '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -L$func_replace_sysroot_result" + ;; + -R*) + func_stripname -R '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -R$func_replace_sysroot_result" ;; - *) newdependency_libs="$newdependency_libs $deplib" ;; + *) func_append newdependency_libs " $deplib" ;; esac done dependency_libs="$newdependency_libs" @@ -8082,9 +9296,9 @@ EOF eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" - newdlfiles="$newdlfiles $libdir/$name" + func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" ;; - *) newdlfiles="$newdlfiles $lib" ;; + *) func_append newdlfiles " $lib" ;; esac done dlfiles="$newdlfiles" @@ -8101,7 +9315,7 @@ EOF eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" - newdlprefiles="$newdlprefiles $libdir/$name" + func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" ;; esac done @@ -8113,7 +9327,7 @@ EOF [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac - newdlfiles="$newdlfiles $abs" + func_append newdlfiles " $abs" done dlfiles="$newdlfiles" newdlprefiles= @@ -8122,15 +9336,33 @@ EOF [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac - newdlprefiles="$newdlprefiles $abs" + func_append newdlprefiles " $abs" done dlprefiles="$newdlprefiles" fi $RM $output # place dlname in correct position for cygwin + # In fact, it would be nice if we could use this code for all target + # systems that can't hard-code library paths into their executables + # and that have no shared library path variable independent of PATH, + # but it turns out we can't easily determine that from inspecting + # libtool variables, so we have to hard-code the OSs to which it + # applies here; at the moment, that means platforms that use the PE + # object format with DLL files. See the long comment at the top of + # tests/bindir.at for full details. tdlname=$dlname case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) + # If a -bindir argument was supplied, place the dll there. + if test "x$bindir" != x ; + then + func_relative_path "$install_libdir" "$bindir" + tdlname=$func_relative_path_result$dlname + else + # Otherwise fall back on heuristic. + tdlname=../bin/$dlname + fi + ;; esac $ECHO > $output "\ # $outputname - a libtool library file @@ -8189,7 +9421,7 @@ relink_command=\"$relink_command\"" exit $EXIT_SUCCESS } -{ test "$mode" = link || test "$mode" = relink; } && +{ test "$opt_mode" = link || test "$opt_mode" = relink; } && func_mode_link ${1+"$@"} @@ -8209,9 +9441,9 @@ func_mode_uninstall () for arg do case $arg in - -f) RM="$RM $arg"; rmforce=yes ;; - -*) RM="$RM $arg" ;; - *) files="$files $arg" ;; + -f) func_append RM " $arg"; rmforce=yes ;; + -*) func_append RM " $arg" ;; + *) func_append files " $arg" ;; esac done @@ -8220,24 +9452,23 @@ func_mode_uninstall () rmdirs= - origobjdir="$objdir" for file in $files; do func_dirname "$file" "" "." dir="$func_dirname_result" if test "X$dir" = X.; then - objdir="$origobjdir" + odir="$objdir" else - objdir="$dir/$origobjdir" + odir="$dir/$objdir" fi func_basename "$file" name="$func_basename_result" - test "$mode" = uninstall && objdir="$dir" + test "$opt_mode" = uninstall && odir="$dir" - # Remember objdir for removal later, being careful to avoid duplicates - if test "$mode" = clean; then + # Remember odir for removal later, being careful to avoid duplicates + if test "$opt_mode" = clean; then case " $rmdirs " in - *" $objdir "*) ;; - *) rmdirs="$rmdirs $objdir" ;; + *" $odir "*) ;; + *) func_append rmdirs " $odir" ;; esac fi @@ -8263,18 +9494,17 @@ func_mode_uninstall () # Delete the libtool libraries and symlinks. for n in $library_names; do - rmfiles="$rmfiles $objdir/$n" + func_append rmfiles " $odir/$n" done - test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" + test -n "$old_library" && func_append rmfiles " $odir/$old_library" - case "$mode" in + case "$opt_mode" in clean) - case " $library_names " in - # " " in the beginning catches empty $dlname + case " $library_names " in *" $dlname "*) ;; - *) rmfiles="$rmfiles $objdir/$dlname" ;; + *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; esac - test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" ;; uninstall) if test -n "$library_names"; then @@ -8302,19 +9532,19 @@ func_mode_uninstall () # Add PIC object to the list of files to remove. if test -n "$pic_object" && test "$pic_object" != none; then - rmfiles="$rmfiles $dir/$pic_object" + func_append rmfiles " $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. if test -n "$non_pic_object" && test "$non_pic_object" != none; then - rmfiles="$rmfiles $dir/$non_pic_object" + func_append rmfiles " $dir/$non_pic_object" fi fi ;; *) - if test "$mode" = clean ; then + if test "$opt_mode" = clean ; then noexename=$name case $file in *.exe) @@ -8324,7 +9554,7 @@ func_mode_uninstall () noexename=$func_stripname_result # $file with .exe has already been added to rmfiles, # add $file without .exe - rmfiles="$rmfiles $file" + func_append rmfiles " $file" ;; esac # Do a test to see if this is a libtool program. @@ -8333,7 +9563,7 @@ func_mode_uninstall () func_ltwrapper_scriptname "$file" relink_command= func_source $func_ltwrapper_scriptname_result - rmfiles="$rmfiles $func_ltwrapper_scriptname_result" + func_append rmfiles " $func_ltwrapper_scriptname_result" else relink_command= func_source $dir/$noexename @@ -8341,12 +9571,12 @@ func_mode_uninstall () # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles - rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" + func_append rmfiles " $odir/$name $odir/${name}S.${objext}" if test "$fast_install" = yes && test -n "$relink_command"; then - rmfiles="$rmfiles $objdir/lt-$name" + func_append rmfiles " $odir/lt-$name" fi if test "X$noexename" != "X$name" ; then - rmfiles="$rmfiles $objdir/lt-${noexename}.c" + func_append rmfiles " $odir/lt-${noexename}.c" fi fi fi @@ -8354,7 +9584,6 @@ func_mode_uninstall () esac func_show_eval "$RM $rmfiles" 'exit_status=1' done - objdir="$origobjdir" # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do @@ -8366,16 +9595,16 @@ func_mode_uninstall () exit $exit_status } -{ test "$mode" = uninstall || test "$mode" = clean; } && +{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && func_mode_uninstall ${1+"$@"} -test -z "$mode" && { +test -z "$opt_mode" && { help="$generic_help" func_fatal_help "you must specify a MODE" } test -z "$exec_cmd" && \ - func_fatal_help "invalid operation mode \`$mode'" + func_fatal_help "invalid operation mode \`$opt_mode'" if test -n "$exec_cmd"; then eval exec "$exec_cmd" |