path: root/testchar.c

/**
 * Test the UTF-8 decoding routines
 *
 * author: Daniel Veillard
 * copy: see Copyright for the status of this software.
 */

#include <stdio.h>
#include <string.h>
#include <libxml/parser.h>
#include <libxml/parserInternals.h>

int lastError;

static void errorHandler(void *unused, xmlErrorPtr err) {
    if ((unused == NULL) && (err != NULL) && (lastError == 0)) {
        lastError = err->code;
    }
}

char document1[100] = "<doc>XXXX</doc>";
char document2[100] = "<doc foo='XXXX'/>";

static void testDocumentRangeByte1(xmlParserCtxtPtr ctxt, char *document,
                  int len,  char *data, int forbid1, int forbid2) {
    int i;
    xmlDocPtr res;

    for (i = 0;i <= 0xFF;i++) {
	lastError = 0;
	xmlCtxtReset(ctxt);

        data[0] = i;

	res = xmlReadMemory(document, len, "test", NULL, 0);

	if ((i == forbid1) || (i == forbid2)) {
	    if ((lastError == 0) || (res != NULL))
	        fprintf(stderr,
		    "Failed to detect invalid char for Byte 0x%02X: %c\n",
		        i, i);
	}

	else if ((i == '<') || (i == '&')) {
	    if ((lastError == 0) || (res != NULL))
	        fprintf(stderr,
		    "Failed to detect illegal char %c for Byte 0x%02X\n", i, i);
	}
	else if (((i < 0x20) || (i >= 0x80)) &&
	    (i != 0x9) && (i != 0xA) && (i != 0xD)) {
	    if ((lastError != XML_ERR_INVALID_CHAR) && (res != NULL))
	        fprintf(stderr,
		    "Failed to detect invalid char for Byte 0x%02X\n", i);
	}
	else if (res == NULL) {
	    fprintf(stderr,
		"Failed to parse valid char for Byte 0x%02X : %c\n", i, i);
	}
	if (res != NULL)
	    xmlFreeDoc(res);
    }
}

static void testDocumentRangeByte2(xmlParserCtxtPtr ctxt, char *document,
                  int len,  char *data) {
    int i, j;
    xmlDocPtr res;

    for (i = 0x80;i <= 0xFF;i++) {
    for (j = 0;j <= 0xFF;j++) {
	lastError = 0;
	xmlCtxtReset(ctxt);

        data[0] = i;
        data[1] = j;

	res = xmlReadMemory(document, len, "test", NULL, 0);

	/* if first bit of first char is set, then second bit must too */
	if ((i & 0x80) && ((i & 0x40) == 0)) {
	    if ((lastError == 0) || (res != NULL))
		fprintf(stderr,
		"Failed to detect invalid char for Bytes 0x%02X 0x%02X\n",
			i, j);
	}

	/*
	 * if first bit of first char is set, then second char first
	 * bits must be 10
	 */
	else if ((i & 0x80) && ((j & 0xC0) != 0x80)) {
	    if ((lastError == 0) || (res != NULL))
		fprintf(stderr,
	    "Failed to detect invalid char for Bytes 0x%02X 0x%02X\n",
			i, j);
	}

	/*
	 * if using a 2 byte encoding then the value must be greater
	 * than 0x80, i.e. one of bits 5 to 1 of i must be set
	 */
	else if ((i & 0x80) && ((i & 0x1E) == 0)) {
	    if ((lastError == 0) || (res != NULL))
		fprintf(stderr,
	    "Failed to detect invalid char for Bytes 0x%02X 0x%02X\n",
			i, j);
	}

	/*
	 * if third bit of first char is set, then the sequence would need
	 * at least 3 bytes, but we give only 2 !
	 */
	else if ((i & 0xE0) == 0xE0) {
	    if ((lastError == 0) || (res != NULL))
		fprintf(stderr,
	    "Failed to detect invalid char for Bytes 0x%02X 0x%02X 0x00\n",
			i, j);
	}

	/*
	 * We should see no error in remaning cases
	 */
	else if ((lastError != 0) || (res == NULL)) {
	    fprintf(stderr, 
		"Failed to parse document for Bytes 0x%02X 0x%02X\n", i, j);
	}
	if (res != NULL)
	    xmlFreeDoc(res);
    }
    }
}

/**
 * testDocumentRanges:
 *
 * Test the correct UTF8 character parsing in context of XML documents
 * Those are in-context injection tests checking the parser behaviour on
 * edge case values at different point in content, beginning and end of
 * CDATA in text or in attribute values.
 */

static void testDocumentRanges(void) {
    xmlParserCtxtPtr ctxt;
    char *data;

    /*
     * Set up a parsing context using the first document as
     * the current input source.
     */
    ctxt = xmlNewParserCtxt();
    if (ctxt == NULL) {
        fprintf(stderr, "Failed to allocate parser context\n");
	return;
    }

    printf("testing 1 byte char in document: 1");
    fflush(stdout);
    data = &document1[5];
    data[0] = ' ';
    data[1] = ' ';
    data[2] = ' ';
    data[3] = ' ';
    /* test 1 byte injection at beginning of area */
    testDocumentRangeByte1(ctxt, &document1[0], strlen(document1),
                           data, -1, -1);
    printf(" 2");
    fflush(stdout);
    data[0] = ' ';
    data[1] = ' ';
    data[2] = ' ';
    data[3] = ' ';
    /* test 1 byte injection at end of area */
    testDocumentRangeByte1(ctxt, &document1[0], strlen(document1),
                           data + 3, -1, -1);

    printf(" 3");
    fflush(stdout);
    data = &document2[10];
    data[0] = ' ';
    data[1] = ' ';
    data[2] = ' ';
    data[3] = ' ';
    /* test 1 byte injection at beginning of area */
    testDocumentRangeByte1(ctxt, &document2[0], strlen(document2),
                           data, '\'', -1);
    printf(" 4");
    fflush(stdout);
    data[0] = ' ';
    data[1] = ' ';
    data[2] = ' ';
    data[3] = ' ';
    /* test 1 byte injection at end of area */
    testDocumentRangeByte1(ctxt, &document2[0], strlen(document2),
                           data + 3, '\'', -1);
    printf(" done\n");

    printf("testing 2 byte char in document: 1");
    fflush(stdout);
    data = &document1[5];
    data[0] = ' ';
    data[1] = ' ';
    data[2] = ' ';
    data[3] = ' ';
    /* test 2 byte injection at beginning of area */
    testDocumentRangeByte2(ctxt, &document1[0], strlen(document1),
                           data);
    printf(" 2");
    fflush(stdout);
    data[0] = ' ';
    data[1] = ' ';
    data[2] = ' ';
    data[3] = ' ';
    /* test 2 byte injection at end of area */
    testDocumentRangeByte2(ctxt, &document1[0], strlen(document1),
                           data + 2);

    printf(" 3");
    fflush(stdout);
    data = &document2[10];
    data[0] = ' ';
    data[1] = ' ';
    data[2] = ' ';
    data[3] = ' ';
    /* test 2 byte injection at beginning of area */
    testDocumentRangeByte2(ctxt, &document2[0], strlen(document2),
                           data);
    printf(" 4");
    fflush(stdout);
    data[0] = ' ';
    data[1] = ' ';
    data[2] = ' ';
    data[3] = ' ';
    /* test 2 byte injection at end of area */
    testDocumentRangeByte2(ctxt, &document2[0], strlen(document2),
                           data + 2);
    printf(" done\n");

    xmlFreeParserCtxt(ctxt);
}

static void testCharRangeByte1(xmlParserCtxtPtr ctxt, char *data) {
    int i = 0;
    int len, c;

    data[1] = 0;
    data[2] = 0;
    data[3] = 0;
    for (i = 0;i <= 0xFF;i++) {
        data[0] = i;
	ctxt->charset = XML_CHAR_ENCODING_UTF8;

	lastError = 0;
        c = xmlCurrentChar(ctxt, &len);
	if ((i == 0) || (i >= 0x80)) {
	    /* we must see an error there */
	    if (lastError != XML_ERR_INVALID_CHAR)
	        fprintf(stderr,
		    "Failed to detect invalid char for Byte 0x%02X\n", i);
	} else if (i == 0xD) {
	    if ((c != 0xA) || (len != 1))
		fprintf(stderr, "Failed to convert char for Byte 0x%02X\n", i);
	} else if ((c != i) || (len != 1)) {
	    fprintf(stderr, "Failed to parse char for Byte 0x%02X\n", i);
	}
    }
}

static void testCharRangeByte2(xmlParserCtxtPtr ctxt, char *data) {
    int i, j;
    int len, c;

    data[2] = 0;
    data[3] = 0;
    for (i = 0x80;i <= 0xFF;i++) {
	for (j = 0;j <= 0xFF;j++) {
	    data[0] = i;
	    data[1] = j;
	    ctxt->charset = XML_CHAR_ENCODING_UTF8;

	    lastError = 0;
	    c = xmlCurrentChar(ctxt, &len);

	    /* if first bit of first char is set, then second bit must too */
	    if ((i & 0x80) && ((i & 0x40) == 0)) {
		if (lastError != XML_ERR_INVALID_CHAR)
		    fprintf(stderr,
		    "Failed to detect invalid char for Bytes 0x%02X 0x%02X\n",
		            i, j);
	    }

	    /*
	     * if first bit of first char is set, then second char first
	     * bits must be 10
	     */
	    else if ((i & 0x80) && ((j & 0xC0) != 0x80)) {
		if (lastError != XML_ERR_INVALID_CHAR)
		    fprintf(stderr,
		"Failed to detect invalid char for Bytes 0x%02X 0x%02X: %d\n",
		            i, j, c);
	    }

	    /*
	     * if using a 2 byte encoding then the value must be greater
	     * than 0x80, i.e. one of bits 5 to 1 of i must be set
	     */
	    else if ((i & 0x80) && ((i & 0x1E) == 0)) {
		if (lastError != XML_ERR_INVALID_CHAR)
		    fprintf(stderr,
		"Failed to detect invalid char for Bytes 0x%02X 0x%02X: %d\n",
		            i, j, c);
	    }

	    /*
	     * if third bit of first char is set, then the sequence would need
	     * at least 3 bytes, but we give only 2 !
	     */
	    else if ((i & 0xE0) == 0xE0) {
		if (lastError != XML_ERR_INVALID_CHAR)
		    fprintf(stderr,
		"Failed to detect invalid char for Bytes 0x%02X 0x%02X 0x00\n",
		            i, j);
	    }

            /*
	     * We should see no error in remaning cases
	     */
	    else if ((lastError != 0) || (len != 2)) {
		fprintf(stderr,
		    "Failed to parse char for Bytes 0x%02X 0x%02X\n", i, j);
	    }

            /*
	     * Finally check the value is right
	     */
	    else if (c != (j & 0x3F) + ((i & 0x1F) << 6)) {
		fprintf(stderr,
	"Failed to parse char for Bytes 0x%02X 0x%02X: expect %d got %d\n",
	                i, j, ((j & 0x3F) + ((i & 0x1F) << 6)), c);
	    }
        }
    }
}

static void testCharRangeByte3(xmlParserCtxtPtr ctxt, char *data) {
    int i, j, k, K;
    int len, c;
    unsigned char lows[6] = {0, 0x80, 0x81, 0xC1, 0xFF, 0xBF};
    int value;

    data[3] = 0;
    for (i = 0xE0;i <= 0xFF;i++) {
    for (j = 0;j <= 0xFF;j++) {
    for (k = 0;k < 6;k++) {
	data[0] = i;
	data[1] = j;
	K = lows[k];
	data[2] = (char) K;
	value = (K & 0x3F) + ((j & 0x3F) << 6) + ((i & 0xF) << 12);
	ctxt->charset = XML_CHAR_ENCODING_UTF8;

	lastError = 0;
	c = xmlCurrentChar(ctxt, &len);

	/*
	 * if fourth bit of first char is set, then the sequence would need
	 * at least 4 bytes, but we give only 3 !
	 */
	if ((i & 0xF0) == 0xF0) {
	    if (lastError != XML_ERR_INVALID_CHAR)
		fprintf(stderr,
	"Failed to detect invalid char for Bytes 0x%02X 0x%02X 0x%02X 0x%02X\n",
			i, j, K, data[3]);
	}

        /*
	 * The second and the third bytes must start with 10
	 */
	else if (((j & 0xC0) != 0x80) || ((K & 0xC0) != 0x80)) {
	    if (lastError != XML_ERR_INVALID_CHAR)
		fprintf(stderr,
	"Failed to detect invalid char for Bytes 0x%02X 0x%02X 0x%02X\n",
			i, j, K);
	}

	/*
	 * if using a 3 byte encoding then the value must be greater
	 * than 0x800, i.e. one of bits 4 to 0 of i must be set or
	 * the 6th byte of data[1] must be set
	 */
	else if (((i & 0xF) == 0) && ((j & 0x20) == 0)) {
	    if (lastError != XML_ERR_INVALID_CHAR)
		fprintf(stderr,
	    "Failed to detect invalid char for Bytes 0x%02X 0x%02X 0x%02X\n",
			i, j, K);
	}

        /*
	 * There are values in that range that are not allowed in XML-1.0
	 */
	else if (((value > 0xD7FF) && (value <0xE000)) ||
	         ((value > 0xFFFD) && (value <0x10000))) {
	    if (lastError != XML_ERR_INVALID_CHAR)
		fprintf(stderr,
	"Failed to detect invalid char 0x%04X for Bytes 0x%02X 0x%02X 0x%02X\n",
			value, i, j, K);
	}

	/*
	 * We should see no error in remaining cases
	 */
	else if ((lastError != 0) || (len != 3)) {
	    fprintf(stderr, 
		"Failed to parse char for Bytes 0x%02X 0x%02X 0x%02X\n",
		    i, j, K);
	}

	/*
	 * Finally check the value is right
	 */
	else if (c != value) {
	    fprintf(stderr, 
    "Failed to parse char for Bytes 0x%02X 0x%02X 0x%02X: expect %d got %d\n",
		i, j, data[2], value, c);
	}
    }
    }
    }
}

static void testCharRangeByte4(xmlParserCtxtPtr ctxt, char *data) {
    int i, j, k, K, l, L;
    int len, c;
    unsigned char lows[6] = {0, 0x80, 0x81, 0xC1, 0xFF, 0xBF};
    int value;

    data[4] = 0;
    for (i = 0xF0;i <= 0xFF;i++) {
    for (j = 0;j <= 0xFF;j++) {
    for (k = 0;k < 6;k++) {
    for (l = 0;l < 6;l++) {
	data[0] = i;
	data[1] = j;
	K = lows[k];
	data[2] = (char) K;
	L = lows[l];
	data[3] = (char) L;
	value = (L & 0x3F) + ((K & 0x3F) << 6) + ((j & 0x3F) << 12) +
	        ((i & 0x7) << 18);
	ctxt->charset = XML_CHAR_ENCODING_UTF8;

	lastError = 0;
	c = xmlCurrentChar(ctxt, &len);

	/*
	 * if fifth bit of first char is set, then the sequence would need
	 * at least 5 bytes, but we give only 4 !
	 */
	if ((i & 0xF8) == 0xF8) {
	    if (lastError != XML_ERR_INVALID_CHAR)
		fprintf(stderr,
  "Failed to detect invalid char for Bytes 0x%02X 0x%02X 0x%02X 0x%02X\n",
			i, j, K, data[3]);
	}

        /*
	 * The second, third and fourth bytes must start with 10
	 */
	else if (((j & 0xC0) != 0x80) || ((K & 0xC0) != 0x80) ||
	         ((L & 0xC0) != 0x80)) {
	    if (lastError != XML_ERR_INVALID_CHAR)
		fprintf(stderr,
	"Failed to detect invalid char for Bytes 0x%02X 0x%02X 0x%02X 0x%02X\n",
			i, j, K, L);
	}

	/*
	 * if using a 3 byte encoding then the value must be greater
	 * than 0x10000, i.e. one of bits 3 to 0 of i must be set or
	 * the 6 or 5th byte of j must be set
	 */
	else if (((i & 0x7) == 0) && ((j & 0x30) == 0)) {
	    if (lastError != XML_ERR_INVALID_CHAR)
		fprintf(stderr,
	"Failed to detect invalid char for Bytes 0x%02X 0x%02X 0x%02X 0x%02X\n",
			i, j, K, L);
	}

        /*
	 * There are values in that range that are not allowed in XML-1.0
	 */
	else if (((value > 0xD7FF) && (value <0xE000)) ||
	         ((value > 0xFFFD) && (value <0x10000)) || 
		 (value > 0x10FFFF)) {
	    if (lastError != XML_ERR_INVALID_CHAR)
		fprintf(stderr,
"Failed to detect invalid char 0x%04X for Bytes 0x%02X 0x%02X 0x%02X 0x%02X\n",
			value, i, j, K, L);
	}

	/*
	 * We should see no error in remaining cases
	 */
	else if ((lastError != 0) || (len != 4)) {
	    fprintf(stderr, 
		"Failed to parse char for Bytes 0x%02X 0x%02X 0x%02X\n",
		    i, j, K);
	}

	/*
	 * Finally check the value is right
	 */
	else if (c != value) {
	    fprintf(stderr, 
    "Failed to parse char for Bytes 0x%02X 0x%02X 0x%02X: expect %d got %d\n",
		i, j, data[2], value, c);
	}
    }
    }
    }
    }
}

/**
 * testCharRanges:
 *
 * Test the correct UTF8 character parsing in isolation i.e.
 * not when parsing a full document, this is less expensive and we can
 * cover the full range of UTF-8 chars accepted by XML-1.0
 */

static void testCharRanges(void) {
    char data[5];
    xmlParserCtxtPtr ctxt;
    xmlParserInputBufferPtr buf;
    xmlParserInputPtr input;

    memset(data, 0, 5);

    /*
     * Set up a parsing context using the above data buffer as
     * the current input source.
     */
    ctxt = xmlNewParserCtxt();
    if (ctxt == NULL) {
        fprintf(stderr, "Failed to allocate parser context\n");
	return;
    }
    buf = xmlParserInputBufferCreateStatic(data, sizeof(data),
                                           XML_CHAR_ENCODING_NONE);
    if (buf == NULL) {
        fprintf(stderr, "Failed to allocate input buffer\n");
	goto error;
    }
    input = xmlNewInputStream(ctxt);
    if (input == NULL) {
        xmlFreeParserInputBuffer(buf);
	goto error;
    }
    input->filename = NULL;
    input->buf = buf;
    input->base = input->buf->buffer->content;
    input->cur = input->buf->buffer->content;
    input->end = &input->buf->buffer->content[4];
    inputPush(ctxt, input);

    printf("testing char range: 1");
    fflush(stdout);
    testCharRangeByte1(ctxt, data);
    printf(" 2");
    fflush(stdout);
    testCharRangeByte2(ctxt, data);
    printf(" 3");
    fflush(stdout);
    testCharRangeByte3(ctxt, data);
    printf(" 4");
    fflush(stdout);
    testCharRangeByte4(ctxt, data);
    printf(" done\n");
    fflush(stdout);

error:
    xmlFreeParserCtxt(ctxt);
}

int main(void) {

    /*
     * this initialize the library and check potential ABI mismatches
     * between the version it was compiled for and the actual shared
     * library used.
     */
    LIBXML_TEST_VERSION

    /*
     * Catch errors separately
     */

    xmlSetStructuredErrorFunc(NULL, errorHandler);

    /*
     * Run the tests
     */
    testCharRanges();
    testDocumentRanges();

    /*
     * Cleanup function for the XML library.
     */
    xmlCleanupParser();
    /*
     * this is to debug memory for regression tests
     */
    xmlMemoryDump();
    return(0);
}