summaryrefslogtreecommitdiff
path: root/usr/src/uts/common/sys/kbtrans.h
diff options
context:
space:
mode:
Diffstat (limited to 'usr/src/uts/common/sys/kbtrans.h')
-rw-r--r--usr/src/uts/common/sys/kbtrans.h242
1 files changed, 242 insertions, 0 deletions
diff --git a/usr/src/uts/common/sys/kbtrans.h b/usr/src/uts/common/sys/kbtrans.h
new file mode 100644
index 0000000000..57f76ad50d
--- /dev/null
+++ b/usr/src/uts/common/sys/kbtrans.h
@@ -0,0 +1,242 @@
+/*
+ * CDDL HEADER START
+ *
+ * The contents of this file are subject to the terms of the
+ * Common Development and Distribution License, Version 1.0 only
+ * (the "License"). You may not use this file except in compliance
+ * with the License.
+ *
+ * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+ * or http://www.opensolaris.org/os/licensing.
+ * See the License for the specific language governing permissions
+ * and limitations under the License.
+ *
+ * When distributing Covered Code, include this CDDL HEADER in each
+ * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+ * If applicable, add the following below this CDDL HEADER, with the
+ * fields enclosed by brackets "[]" replaced with your own identifying
+ * information: Portions Copyright [yyyy] [name of copyright owner]
+ *
+ * CDDL HEADER END
+ */
+/*
+ * Copyright 2005 Sun Microsystems, Inc. All rights reserved.
+ * Use is subject to license terms.
+ */
+
+#ifndef _SYS_KBTRANS_H
+#define _SYS_KBTRANS_H
+
+#pragma ident "%Z%%M% %I% %E% SMI"
+
+/*
+ * Interface between hardware keyboard driver and generic keyboard
+ * translation module.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <sys/consdev.h>
+
+/*
+ * By default, set conskbd's layout to US
+ */
+#define KBTRANS_USBKB_LAYOUT_US 0x21
+#define KBTRANS_USBKB_DEFAULT_LAYOUT KBTRANS_USBKB_LAYOUT_US
+
+/*
+ * Maximum of keys in a keyboard
+ */
+#define KBTRANS_KEYNUMS_MAX 255
+
+/*
+ * Do not expose the internals of these structures to kbtrans clients
+ */
+struct kbtrans_hardware;
+
+struct kbtrans;
+
+enum kbtrans_message_response {
+ KBTRANS_MESSAGE_HANDLED = 0,
+ KBTRANS_MESSAGE_NOT_HANDLED = 1
+};
+
+typedef boolean_t (*polled_keycode_func)(struct kbtrans_hardware *,
+ kbtrans_key_t *, enum keystate *);
+struct hw_polledio {
+ void *polled_argument;
+ polled_keycode_func *polled_keycode;
+};
+
+
+
+/*
+ * Callbacks registered by the hardware specific driver/module
+ */
+struct kbtrans_callbacks {
+
+ /* Routine to set the LED's in non-polled mode */
+ void (*kbtrans_streams_setled)(struct kbtrans_hardware *, int);
+
+ /* Routine to set the LED's in polled mode */
+ void (*kbtrans_polled_setled)(struct kbtrans_hardware *, int);
+
+ /* Routine to indicate that a scande is available in polled mode */
+ boolean_t (*kbtrans_polled_keycheck)(struct kbtrans_hardware *,
+ kbtrans_key_t *, enum keystate *);
+};
+
+/*
+ * kbtrans_streams_init():
+ *
+ * Initializes the generic keyboard translation module. Must be
+ * called from the hardware module's open(9e) routine.
+ *
+ * Arguments:
+ * - queue_t *q
+ * The read queue.
+ *
+ * - int sflag
+ * sflag from the streams open routine
+ *
+ * - cred_t *crp
+ * credentials from open
+ *
+ * - struct kbtrans_hardware *hw
+ * hardware-specific data, passed to hardware callbacks
+ *
+ * - struct kbtrans_callbacks *hw_callbacks
+ * hardware support callbacks (see below)
+ *
+ * - struct kbtrans **kbtrans
+ * returned state structure pointer
+ *
+ * - int initial_leds
+ * - int initial_led_mask
+ * Provides state information (if available) about the current
+ * keyboard state, in the form of LED state. initial_leds shows
+ * which LEDs are lit; initial_led_mask shows which bits in
+ * initial_leds are valid. This mechanism exists primarily to
+ * retain the existing state of NumLock across the transition
+ * from firmware to the OS.
+ */
+extern int kbtrans_streams_init(queue_t *, int, cred_t *,
+ struct kbtrans_hardware *, struct kbtrans_callbacks *,
+ struct kbtrans **, int, int);
+
+/*
+ * kbtrans_streams_fini():
+ *
+ * Shuts down the generic translation module. Must be called from
+ * the hardware module's close(9e) routine.
+ */
+extern int kbtrans_streams_fini(struct kbtrans *);
+
+/*
+ * kbtrans_streams_message():
+ *
+ * The hardware module should pass all streams messages received from
+ * above to this routine. The generic translation module will process
+ * most of them, returning KBTRANS_MESSAGE_HANDLED for the ones that
+ * it has handled and KBTRANS_MESSAGE_NOT_HANDLED for the ones that
+ * it did not handle. For KBTRANS_MESSAGE_HANDLED, the hardware module
+ * should take no further action on the message. For
+ * KBTRANS_MESSAGE_NOT_HANDLED, the hardware module is responsible for
+ * any action, including returning an appropriate error.
+ *
+ * Must be called from the hardware module's write put(9e) or srv(9e)
+ * routine.
+ */
+extern enum kbtrans_message_response kbtrans_streams_message(struct kbtrans *,
+ mblk_t *);
+
+/*
+ * kbtrans_streams_key():
+ *
+ * When a key is pressed or released, the hardware module should
+ * call kbtrans, passing the key number and its new
+ * state. kbtrans is responsible for autorepeat handling;
+ * the hardware module should report only actual press/release
+ * events, suppressing any hardware-generated autorepeat.
+ */
+extern void kbtrans_streams_key(struct kbtrans *, kbtrans_key_t key,
+ enum keystate state);
+
+/*
+ * kbtrans_streams_set_keyboard():
+ *
+ * At any time after calling kbtrans_streams_init, the hardware
+ * module should make this call to report the type of keyboard
+ * attached. "type" is the keyboard type, typically KB_SUN4,
+ * KB_PC, or KB_USB.
+ */
+extern void kbtrans_streams_set_keyboard(struct kbtrans *, int,
+ struct keyboard *);
+
+/*
+ * kbtrans_streams_has_reset():
+ *
+ * At any time between kbtrans_streams_init and kbtrans_streams_fini,
+ * the hardware module can call this routine to report that the
+ * keyboard has been reset, e.g. by being unplugged and reattached.
+ *
+ * This function is for use by keyboard devices that do not formally
+ * support hotplug. If the keyboard hardware spontaneously resets
+ * itself in a case other than hotplug, this routine is called to
+ * report the rest.
+ *
+ */
+extern void kbtrans_streams_has_reset(struct kbtrans *);
+
+/*
+ * kbtrans_ischar():
+ * kbtrans_getchar():
+ *
+ * These routines are used for polled input, e.g. for kmdb or PROM
+ * input. Note that, with suitable casting, these routines are usable
+ * as CONSOPENPOLLEDIO routines.
+ *
+ * May only be called from single-threaded code, e.g. kmdb.
+ */
+extern boolean_t kbtrans_ischar(struct kbtrans *);
+extern int kbtrans_getchar(struct kbtrans *);
+
+/*
+ * kbtrans_streams_enable():
+ * Routine to be called from the hardware specific module when
+ * the stream is ready to take messages.
+ */
+extern void kbtrans_streams_enable(struct kbtrans *);
+
+
+/*
+ * kbtrans_streams_releaseall():
+ * Release all the keys that are held down.
+ */
+extern void kbtrans_streams_releaseall(struct kbtrans *);
+
+/*
+ * kbtrans_streams_set_queue():
+ * Change the queue above the device, to support multiplexors.
+ */
+extern void kbtrans_streams_set_queue(struct kbtrans *, queue_t *);
+
+/*
+ * kbtrans_streams_get_queue():
+ * Retrieve the current queue above the device.
+ */
+extern queue_t *kbtrans_streams_get_queue(struct kbtrans *);
+
+/*
+ * kbtrans_streams_untimeout():
+ * Clear timeout
+ */
+extern void kbtrans_streams_untimeout(struct kbtrans *);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _SYS_KBTRANS_H */