/* * Copyright 2006 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* Copyright (c) 1983, 1984, 1985, 1986, 1987, 1988, 1989 AT&T */ /* All Rights Reserved */ /* * Copyright (c) 1980 Regents of the University of California. * All rights reserved. The Berkeley Software License Agreement * specifies the terms and conditions for redistribution. */ #include /* MB_xxx, mbxxx(), wcxxx() etc. */ #include #include #include #include #include #include #include #include #include #include #include /* std sysV signal.h */ #include #include #include /* for MAXHOSTNAMELEN */ #include "signal.h" /* mainly BSD related signal.h */ #include "sh.local.h" #include "sh.char.h" #ifdef MBCHAR #if !defined(MB_LEN_MAX) || !defined(MB_CUR_MAX) Error: I need both ANSI macros! #endif #else #if !defined(MB_LEN_MAX) #define MB_LEN_MAX 1 #endif #if !defined(MB_CUR_MAX) #define MB_CUR_MAX 1 #endif #endif #ifndef MBCHAR /* Let's replace the ANSI functions with our own macro * for efficiency! */ #define mbtowc(pwc, pmb, n_is_ignored) ((*(pwc) = *(pmb)), 1) #define wctomb(pmb, wc) ((*(pmb) = ((char)wc)), 1) #endif /* !MBCHAR */ /* * C shell * * Bill Joy, UC Berkeley * October, 1978; May 1980 * * Jim Kulp, IIASA, Laxenburg Austria * April, 1980 */ /* * If we are setting the $cwd variable becuz we did a * cd, chdir, pushd, popd command, then set didchdir to * 1. This prevents globbing down when setting $cwd. * However, if the user set $cwd, we want the globbing * done; so, didchdir would be equal to 0 in that case. */ extern int didchdir; #define isdir(d) ((d.st_mode & S_IFMT) == S_IFDIR) typedef char bool; /* * tchar (Tagged CHARacter) is a place holder to keep a QUOTE bit and * a character. * For European language handling, lower 8 bits of tchar is used * to store a character. For other languages, especially Asian, 16 bits * are used to store a character. * Following typedef's assume short int is a 16-bit entity and long int is * a 32-bit entity. * The QUOTE bit tells whether the character is subject to further * interpretation such as history substitution, file mathing, command * subsitution. TRIM is a mask to strip off the QUOTE bit. */ #ifdef MBCHAR /* For multibyte character handling. */ typedef long int tchar; #define QUOTE 0x80000000 #define TRIM 0x7fffffff #else /* !MBCHAR */ /* European language requires only 8 bits. */ typedef unsigned short int tchar; #define QUOTE 0x8000 #define TRIM 0x00ff #endif /* !MBCHAR */ #define eq(a, b) (strcmp_(a, b) == 0) /* * Global flags */ extern bool chkstop; /* Warned of stopped jobs... allow exit */ extern bool didfds; /* Have setup i/o fd's for child */ extern bool doneinp; /* EOF indicator after reset from readc */ extern bool exiterr; /* Exit if error or non-zero exit status */ extern bool child; /* Child shell ... errors cause exit */ extern bool haderr; /* Reset was because of an error */ extern bool intty; /* Input is a tty */ extern bool cflg; /* invoked with -c option */ extern bool justpr; /* Just print because of :p hist mod */ extern bool loginsh; /* We are a loginsh -> .login/.logout */ extern bool neednote; /* Need to pnotify() */ extern bool noexec; /* Don't execute, just syntax check */ extern bool pjobs; /* want to print jobs if interrupted */ extern bool setintr; /* Set interrupts on/off -> Wait intr... */ extern bool havhash; /* path hashing is available */ extern bool havhash2; /* cdpath hashing is available */ #ifdef FILEC extern bool filec; /* doing filename expansion */ #endif /* * Global i/o info */ extern tchar *arginp; /* Argument input for sh -c and internal `xx` */ extern int onelflg; /* 2 -> need line for -t, 1 -> exit on read */ extern tchar *file; /* Name of shell file for $0 */ extern char *err_msg; /* Error message from scanner/parser */ extern struct timeval time0; /* Time at which the shell started */ /* * Miscellany */ extern tchar *doldol; /* Character pid for $$ */ extern int uid; /* Invokers uid */ extern int shpgrp; /* Pgrp of shell */ extern int tpgrp; /* Terminal process group */ /* If tpgrp is -1, leave tty alone! */ extern int opgrp; /* Initial pgrp and tty pgrp */ /* * These are declared here because they want to be * initialized in sh.init.c (to allow them to be made readonly) */ extern struct biltins { tchar *bname; int (*bfunct)(); short minargs, maxargs; } bfunc[]; extern int nbfunc; extern struct srch { tchar *s_name; short s_value; } srchn[]; extern int nsrchn; /* * To be able to redirect i/o for builtins easily, the shell moves the i/o * descriptors it uses away from 0,1,2. * Ideally these should be in units which are closed across exec's * (this saves work) but for version 6, this is not usually possible. * The desired initial values for these descriptors are defined in * sh.local.h. */ extern short SHIN; /* Current shell input (script) */ extern short SHOUT; /* Shell output */ extern short SHDIAG; /* Diagnostic output... shell errs go here */ extern short OLDSTD; /* Old standard input (def for cmds) */ /* * Error control * * Errors in scanning and parsing set up an error message to be printed * at the end and complete. Other errors always cause a reset. * Because of source commands and .cshrc we need nested error catches. */ extern jmp_buf reslab; #define setexit() ((void) setjmp(reslab)) #define reset() longjmp(reslab, 0) /* Should use structure assignment here */ #define getexit(a) copy((void *)(a), (void *)reslab, sizeof reslab) #define resexit(a) copy((void *)reslab, ((void *)(a)), sizeof reslab) extern tchar *gointr; /* Label for an onintr transfer */ extern void (*parintr)(); /* Parents interrupt catch */ extern void (*parterm)(); /* Parents terminate catch */ /* * Each level of input has a buffered input structure. * There are one or more blocks of buffered input for each level, * exactly one if the input is seekable and tell is available. * In other cases, the shell buffers enough blocks to keep all loops * in the buffer. */ extern struct Bin { off_t Bfseekp; /* Seek pointer */ off_t Bfbobp; /* Seekp of beginning of buffers */ off_t Bfeobp; /* Seekp of end of buffers */ short Bfblocks; /* Number of buffer blocks */ tchar **Bfbuf; /* The array of buffer blocks */ } B; #define fseekp B.Bfseekp #define fbobp B.Bfbobp #define feobp B.Bfeobp #define fblocks B.Bfblocks #define fbuf B.Bfbuf #define btell() fseekp #ifndef btell extern off_t btell(void); #endif /* * The shell finds commands in loops by reseeking the input * For whiles, in particular, it reseeks to the beginning of the * line the while was on; hence the while placement restrictions. */ extern off_t lineloc; #ifdef TELL extern bool cantell; /* Is current source tellable ? */ #endif /* * Input lines are parsed into doubly linked circular * lists of words of the following form. */ struct wordent { tchar *word; struct wordent *prev; struct wordent *next; }; /* * During word building, both in the initial lexical phase and * when expanding $ variable substitutions, expansion by `!' and `$' * must be inhibited when reading ahead in routines which are themselves * processing `!' and `$' expansion or after characters such as `\' or in * quotations. The following flags are passed to the getC routines * telling them which of these substitutions are appropriate for the * next character to be returned. */ #define DODOL 1 #define DOEXCL 2 #define DOALL DODOL|DOEXCL extern tchar *lap; /* * Parser structure * * Each command is parsed to a tree of command structures and * flags are set bottom up during this process, to be propagated down * as needed during the semantics/exeuction pass (sh.sem.c). */ struct command { short t_dtyp; /* Type of node */ short t_dflg; /* Flags, e.g. FAND|... */ union { tchar *T_dlef; /* Input redirect word */ struct command *T_dcar; /* Left part of list/pipe */ } L; union { tchar *T_drit; /* Output redirect word */ struct command *T_dcdr; /* Right part of list/pipe */ } R; #define t_dlef L.T_dlef #define t_dcar L.T_dcar #define t_drit R.T_drit #define t_dcdr R.T_dcdr tchar **t_dcom; /* Command/argument vector */ char *cfname; /* char pathname for execv */ char **cargs; /* char arg vec for execv */ struct command *t_dspr; /* Pointer to ()'d subtree */ short t_nice; }; #define TCOM 1 /* t_dcom t_drit */ #define TPAR 2 /* ( t_dspr ) t_drit */ #define TFIL 3 /* t_dlef | t_drit */ #define TLST 4 /* t_dlef ; t_drit */ #define TOR 5 /* t_dlef || t_drit */ #define TAND 6 /* t_dlef && t_drit */ #define FSAVE (FNICE|FTIME|FNOHUP) /* save these when re-doing */ #define FAND (1<<0) /* executes in background */ #define FCAT (1<<1) /* output is redirected >> */ #define FPIN (1<<2) /* input is a pipe */ #define FPOU (1<<3) /* output is a pipe */ #define FPAR (1<<4) /* don't fork, last ()ized cmd */ #define FINT (1<<5) /* should be immune from intr's */ /* spare */ #define FDIAG (1<<7) /* redirect unit 2 with unit 1 */ #define FANY (1<<8) /* output was ! */ #define FHERE (1<<9) /* input redirection is << */ #define FREDO (1<<10) /* reexec aft if, repeat,... */ #define FNICE (1<<11) /* t_nice is meaningful */ #define FNOHUP (1<<12) /* nohup this command */ #define FTIME (1<<13) /* time this command */ /* * The keywords for the parser */ #define ZBREAK 0 #define ZBRKSW 1 #define ZCASE 2 #define ZDEFAULT 3 #define ZELSE 4 #define ZEND 5 #define ZENDIF 6 #define ZENDSW 7 #define ZEXIT 8 #define ZFOREACH 9 #define ZGOTO 10 #define ZIF 11 #define ZLABEL 12 #define ZLET 13 #define ZSET 14 #define ZSWITCH 15 #define ZTEST 16 #define ZTHEN 17 #define ZWHILE 18 /* * Structure defining the existing while/foreach loops at this * source level. Loops are implemented by seeking back in the * input. For foreach (fe), the word list is attached here. */ extern struct whyle { off_t w_start; /* Point to restart loop */ off_t w_end; /* End of loop (0 if unknown) */ tchar **w_fe, **w_fe0; /* Current/initial wordlist for fe */ tchar *w_fename; /* Name for fe */ struct whyle *w_next; /* Next (more outer) loop */ } *whyles; /* * Variable structure * * Aliases and variables are stored in AVL balanced binary trees. */ extern struct varent { tchar **vec; /* Array of words which is the value */ tchar *v_name; /* Name of variable/alias */ struct varent *v_link[3]; /* The links, see below */ int v_bal; /* Balance factor */ } shvhed, aliases; #define v_left v_link[0] #define v_right v_link[1] #define v_parent v_link[2] struct varent *adrof1(); #define adrof(v) adrof1(v, &shvhed) #define value(v) value1(v, &shvhed) /* * MAX_VAR_LEN - maximum variable name defined by csh man page to be 128 */ #define MAX_VAR_LEN 128 /* * MAX_VREF_LEN - maximum variable reference $name[...] * it can be as big as a csh word, which is 1024 */ #define MAX_VREF_LEN 1024 /* * The following are for interfacing redo substitution in * aliases to the lexical routines. */ extern struct wordent *alhistp; /* Argument list (first) */ extern struct wordent *alhistt; /* Node after last in arg list */ extern tchar **alvec; /* The (remnants of) alias vector */ /* * Filename/command name expansion variables */ extern short gflag; /* After tglob -> is globbing needed? */ /* * A reasonable limit on number of arguments would seem to be * the maximum number of characters in an arg list / 6. * * XXX: With the new VM system, NCARGS has become enormous, making * it impractical to allocate arrays with NCARGS / 6 entries on * the stack. The proper fix is to revamp code elsewhere (in * sh.dol.c and sh.glob.c) to use a different technique for handling * command line arguments. In the meantime, we simply fall back * on using the old value of NCARGS. */ #ifdef notyet #define GAVSIZ (NCARGS / 6) #else /* notyet */ #define GAVSIZ (10240 / 6) #endif /* notyet */ /* * Variables for filename expansion */ extern tchar **gargv; /* Pointer to the (stack) arglist */ extern long gargc; /* Number args in gargv */ /* * Variables for command expansion. */ extern tchar **pargv; /* Pointer to the argv list space */ /* * History list * * Each history list entry contains an embedded wordlist * from the scanner, a number for the event, and a reference count * to aid in discarding old entries. * * Essentially "invisible" entries are put on the history list * when history substitution includes modifiers, and thrown away * at the next discarding since their event numbers are very negative. */ extern struct Hist { struct wordent Hlex; int Hnum; int Href; struct Hist *Hnext; } Histlist; extern struct wordent paraml; /* Current lexical word list */ extern int eventno; /* Next events number */ extern tchar HIST; /* history invocation character */ extern tchar HISTSUB; /* auto-substitute character */ extern void *xalloc(size_t); extern void *xcalloc(size_t, size_t); extern void *xrealloc(void *, size_t); extern void xfree(void *); extern void Putchar(tchar); extern void bferr(char *) __NORETURN; extern void error() __NORETURN; extern void exitstat(void) __NORETURN; extern tchar *Dfix1(tchar *); extern tchar **blkcpy(tchar **, tchar **); extern tchar **blkspl(tchar **, tchar **); extern char **blkspl_(char **, char **); extern tchar **copyblk(tchar **); extern tchar **dobackp(tchar *, bool); extern tchar *domod(tchar *, int); extern struct Hist *enthist(int, struct wordent *, bool); extern tchar *getenv_(tchar *); extern tchar *getenvs_(char *); extern tchar *getwd_(tchar *); extern tchar **glob(tchar **); extern tchar *globone(tchar *); extern tchar *index_(tchar *, tchar); extern struct biltins *isbfunc(struct command *); extern void pintr(void); extern void pchild(void); extern tchar *putn(int); extern tchar *rindex_(tchar *, tchar); extern tchar **saveblk(tchar **); extern tchar *savestr(tchar *); extern tchar *strcat_(tchar *, tchar *); extern int strlen_(tchar *); extern tchar *strcpy_(tchar *, tchar *); extern tchar *strend(tchar *); extern tchar *strip(tchar *); extern tchar *strspl(tchar *, tchar *); extern struct command *syntax(struct wordent *, struct wordent *, int); extern tchar *value1(tchar *, struct varent *); #define NOSTR ((tchar *) 0) /* * setname is a macro to copy the path in bname. (see sh.err.c) * Here we are dynamically reallocating the bname to the new length * to store the new path */ extern tchar *bname; #define setname(a) { \ bname = xrealloc(bname, (strlen_(a)+1) * sizeof (tchar)); \ strcpy_(bname, a); \ bname[strlen_(a)] = '\0'; \ } #ifdef VFORK extern tchar *Vsav; extern tchar **Vav; extern tchar *Vdp; #endif extern tchar **evalvec; extern tchar *evalp; /* Conversion functions between char and tchar strings. */ tchar *strtots(tchar *, char *); char *tstostr(char *, tchar *); #ifndef NULL #define NULL 0 #endif /* * Xhash is an array of HSHSIZ bits (HSHSIZ / 8 chars), which are used * to hash execs. If it is allocated (havhash true), then to tell * whether ``name'' is (possibly) present in the i'th component * of the variable path, you look at the bit in xhash indexed by * hash(hashname("name"), i). This is setup automatically * after .login is executed, and recomputed whenever ``path'' is * changed. * The two part hash function is designed to let texec() call the * more expensive hashname() only once and the simple hash() several * times (once for each path component checked). * Byte size is assumed to be 8. */ #define HSHSIZ (32*1024) /* 4k bytes */ #define HSHMASK (HSHSIZ - 1) #define HSHMUL 243 /* * The following two arrays are used for caching. xhash * is for caching path variable and xhash2 is for cdpath * variable. */ extern char xhash[HSHSIZ / 8]; extern char xhash2[HSHSIZ / 8]; #define hash(a, b) ((a) * HSHMUL + (b) & HSHMASK) #define bit(h, b) ((h)[(b) >> 3] & 1 << ((b) & 7)) /* bit test */ #define bis(h, b) ((h)[(b) >> 3] |= 1 << ((b) & 7)) /* bit set */