12745 man page typos

Reviewed by: Toomas Soome <tsoome@me.com>
Approved by: Dan McDonald <danmcd@joyent.com>

10 files changed, 39 insertions, 192 deletions

diff --git a/usr/src/man/man1/cp.1 b/usr/src/man/man1/cp.1
index a4b71a5976..97b64289ad 100644
--- a/usr/src/man/man1/cp.1
+++ b/usr/src/man/man1/cp.1
@@ -45,11 +45,10 @@
 .\" Portions Copyright (c) 2007, Sun Microsystems, Inc. All Rights Reserved
 .\" Copyright 2013 Nexenta Systems, Inc. All rights reserved.
 .\"
-.TH CP 1 "Apr 15, 2013"
+.TH CP 1 "May 17, 2020"
 .SH NAME
 cp \- copy files
 .SH SYNOPSIS
-.LP
 .nf
 \fB/usr/bin/cp\fR [\fB-afip@/\fR] \fIsource_file\fR \fItarget_file\fR
 .fi
@@ -90,8 +89,6 @@ cp \- copy files
 .fi
 
 .SH DESCRIPTION
-.sp
-.LP
 In the first synopsis form, neither \fIsource_file\fR nor \fItarget_file\fR are
 directory files, nor can they have the same name. The \fBcp\fR utility copies
 the contents of \fIsource_file\fR to the destination path named by
@@ -121,8 +118,6 @@ In the third or fourth synopsis forms, one or more directories specified by
 the \fB-r\fR or \fB-R\fR must be specified. For each \fIsource_dir\fR, \fBcp\fR
 copies all files and subdirectories.
 .SH OPTIONS
-.sp
-.LP
 The following options are supported for both \fB/usr/bin/cp\fR and
 \fB/usr/xpg4/bin/cp\fR:
 .sp
@@ -272,8 +267,6 @@ Specifying more than one of the mutually-exclusive options \fB-H\fR, \fB-L\fR,
 and \fB-P\fR is not considered an error. The last option specified determines
 the behavior of the utility.
 .SS "/usr/bin/cp"
-.sp
-.LP
 If the \fB-p\fR option is specified with either the \fB-@\fR option or the
 \fB-/\fR option, \fB/usr/bin/cp\fR behaves as follows
 .RS +4
@@ -291,10 +284,8 @@ When both \fB-p\fR and \fB-/\fR are specified in any order, the copy fails if
 extended system attributes cannot be copied.
 .RE
 .SS "/usr/xpg4/bin/cp"
-.sp
-.LP
 If the \fB-p\fR option is specified with either the \fB-@\fR option or the
-\fB-/\fR option, /\fBusr/xpg4/bin/cp\fR behaves as follows:
+\fB-/\fR option, \fB/usr/xpg4/bin/cp\fR behaves as follows:
 .RS +4
 .TP
 .ie t \(bu
@@ -311,8 +302,6 @@ determines whether the copy fails if extended system attributes cannot be
 preserved.
 .RE
 .SH OPERANDS
-.sp
-.LP
 The following operands are supported:
 .sp
 .ne 2
@@ -352,12 +341,9 @@ A pathname of a directory to contain the copied files.
 .RE
 
 .SH USAGE
-.sp
-.LP
 See \fBlargefile\fR(5) for the description of the behavior of \fBcp\fR when
 encountering files greater than or equal to 2 Gbyte ( 2^31 bytes).
 .SH EXAMPLES
-.LP
 \fBExample 1 \fRCopying a File
 .sp
 .LP
@@ -462,8 +448,6 @@ $ ls -/c /tmp/file1
 .sp
 
 .SH ENVIRONMENT VARIABLES
-.sp
-.LP
 See \fBenviron\fR(5) for descriptions of the following environment variables
 that affect the execution of \fBcp\fR: \fBLANG\fR, \fBLC_ALL\fR,
 \fBLC_COLLATE\fR, \fBLC_CTYPE\fR, \fBLC_MESSAGES\fR, and \fBNLSPATH\fR.
@@ -478,8 +462,6 @@ in \fBLC_CTYPE\fR determines the locale for interpretation of sequences of
 bytes of text data a characters, the behavior of character classes used in the
 expression defined for the \fByesexpr\fR. See \fBlocale\fR(5).
 .SH EXIT STATUS
-.sp
-.LP
 The following exit values are returned:
 .sp
 .ne 2
@@ -500,13 +482,8 @@ An error occurred.
 .RE
 
 .SH ATTRIBUTES
-.sp
-.LP
 See \fBattributes\fR(5) for descriptions of the following attributes:
 .SS "/usr/bin/cp"
-.sp
-
-.sp
 .TS
 box;
 c | c
@@ -519,9 +496,6 @@ Interface Stability	Committed
 .TE
 
 .SS "/usr/xpg4/bin/cp"
-.sp
-
-.sp
 .TS
 box;
 c | c
@@ -534,14 +508,10 @@ Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
-.sp
-.LP
 \fBchmod\fR(1), \fBchown\fR(1), \fBsetfacl\fR(1), \fButime\fR(2),
 \fBfgetattr\fR(3C), \fBattributes\fR(5), \fBenviron\fR(5), \fBfsattr\fR(5),
 \fBlargefile\fR(5), \fBlocale\fR(5), \fBstandards\fR(5)
 .SH NOTES
-.sp
-.LP
 The permission modes of the source file are preserved in the copy.
 .sp
 .LP
diff --git a/usr/src/man/man1/elfedit.1 b/usr/src/man/man1/elfedit.1
index 7230d8ab13..b8f27fa3a9 100644
--- a/usr/src/man/man1/elfedit.1
+++ b/usr/src/man/man1/elfedit.1
@@ -4,19 +4,16 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ELFEDIT 1 "Jan 28, 2008"
+.TH ELFEDIT 1 "May 17, 2020"
 .SH NAME
 elfedit \- examine or edit ELF files
 .SH SYNOPSIS
-.LP
 .nf
 \fBelfedit\fR [\fB-adr\fR] [\fB-e\fR \fIcmd\fR] [\fB-L\fR \fIpath\fR] [\fB-o\fR \fBdefault\fR | \fBsimple\fR | \fBnum\fR]
      [\fIinfile\fR] [\fIoutfile\fR]
 .fi
 
 .SH DESCRIPTION
-.sp
-.LP
 \fBelfedit\fR is a tool for examining or modifying the contents of an existing
 ELF object. Specifically, \fBelfedit\fR is used to modify the ELF metadata
 contained in the object. Access is provided to most of the ELF data contained
@@ -24,8 +21,6 @@ in an object, including the ELF header, section header table, program header
 table, dynamic section, hardware and software capabilities, string tables, and
 symbol tables.
 .SS "Syntax"
-.sp
-.LP
 \fBelfedit\fR processes commands from the command line (\fB-e\fR option) or
 from standard input. If standard input is a terminal, \fBelfedit\fR provides
 terminal editing capabilities, as well as extensive command completion. ELF
@@ -302,8 +297,6 @@ Core built in \fBelfedit\fR commands
 .RE
 
 .SS "Status And Command Documentation"
-.sp
-.LP
 Status And Command Documentation
 .sp
 .LP
@@ -399,8 +392,6 @@ help (\fBsys:help\fR) can be used to obtain help on itself:
 .sp
 
 .SS "Module Search Path"
-.sp
-.LP
 \fBelfedit\fR modules are implemented as sharable objects which are loaded on
 demand. When a module is required, \fBelfedit\fR searches a module path in
 order to locate the sharable object that implements the module. The path is a
@@ -444,7 +435,7 @@ appending or prepending directories to the default path.
 .ad
 .RS 6n
 Root of file system tree holding the \fBelfedit\fR program, assuming that
-\fBelfedit\fR is installed as \fBusr/bin/elfedi\fRt within the tree. On a
+\fBelfedit\fR is installed as \fBusr/bin/elfedit\fR within the tree. On a
 standard system, this is simply the standard system root directory (\fB/\fR).
 On a development system, where the copy of \fBelfedit\fR can be installed
 elsewhere, the use of \fB%r\fR can be used to ensure that the matching set of
@@ -507,8 +498,6 @@ The default search path can be changed by setting the \fBELFEDIT_PATH\fR
 environment variable, or by using the \fB-L\fR command line option. If you
 specify both, the \fB-L\fR option supersedes the environment variable.
 .SH OPTIONS
-.sp
-.LP
 The following options are supported:
 .sp
 .ne 2
@@ -628,8 +617,6 @@ examination of files for which the user does not have write permission.
 .RE
 
 .SH OPERANDS
-.sp
-.LP
 The following operands are supported:
 .sp
 .ne 2
@@ -672,8 +659,6 @@ is opened for read-only access, and the modified object contents are written to
 .RE
 
 .SH USAGE
-.sp
-.LP
 When supported by the system, \fBelfedit\fR runs as a 64-bit application,
 capable of processing files greater than or equal to 2 Gbytes (2^31 bytes).
 .sp
@@ -702,8 +687,6 @@ If no \fB-e\fR options are specified, \fBelfedit\fR reads commands from
 issue the write (\fBsys:write\fR) and quit (\fBsys:quit\fR) commands to save
 their work and exit when running in this mode.
 .SH EXIT STATUS
-.sp
-.LP
 The following exit values are returned:
 .sp
 .ne 2
@@ -733,8 +716,6 @@ Invalid command line options were specified.
 .RE
 
 .SH EXAMPLES
-.sp
-.LP
 In the following examples, interactive use of \fBelfedit\fR is shown with the
 shell prompt (\fB%\fR) and the \fBelfedit\fR prompt (\fB>\fR). Neither of these
 characters should be entered by the user.
@@ -866,7 +847,6 @@ STT_FUNC
 .sp
 
 .SH ENVIRONMENT VARIABLES
-.sp
 .ne 2
 .na
 \fB\fBELFEDIT_PATH\fR\fR
@@ -897,7 +877,6 @@ Interactively delivers output from \fBelfedit\fR to the screen. If not set,
 .RE
 
 .SH FILES
-.sp
 .ne 2
 .na
 \fB\fB/usr/lib/elfedit\fR\fR
@@ -918,8 +897,6 @@ Personal \fBtecla\fR customization file for command line editing. See
 .RE
 
 .SH ATTRIBUTES
-.sp
-.LP
 See \fBattributes\fR(5) for descriptions of the following attributes:
 .sp
 
@@ -934,8 +911,6 @@ Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
-.sp
-.LP
 \fBdump\fR(1), \fBelfdump\fR(1), \fBld.so.1\fR(1), \fBmore\fR(1), \fBnm\fR(1),
 \fBpvs\fR(1), \fBelf\fR(3ELF), \fBlibelf\fR(3LIB), \fBtecla\fR(5),
 \fBattributes\fR(5)
@@ -943,8 +918,6 @@ Interface Stability	Committed
 .LP
 \fILinker and Libraries Guide\fR
 .SH WARNINGS
-.sp
-.LP
 \fBelfedit\fR is designed to be a tool for testing and development of the ELF
 system. It offers the ability to examine and change nearly every piece of ELF
 metadata in the object. It quietly allows edits that can produce an invalid or
@@ -965,8 +938,6 @@ Higher level operations, such as the use of the \fBdyn:runpath\fR command to
 change the \fBrunpath\fR of an object, are safe, and can be carried out without
 the sort of risk detailed in this section.
 .SH NOTES
-.sp
-.LP
 Not every ELF operation supported by \fBelfedit\fR can be successfully carried
 out on every ELF object. \fBelfedit\fR is constrained by the existing sections
 found in the file.
diff --git a/usr/src/man/man1/mail.1 b/usr/src/man/man1/mail.1
index 8aad4de37e..5d8bc7b84c 100644
--- a/usr/src/man/man1/mail.1
+++ b/usr/src/man/man1/mail.1
@@ -44,12 +44,11 @@
 .\" Portions Copyright (c) 1992, X/Open Company Limited  All Rights Reserved
 .\" Copyright (c) 2008, Sun Microsystems, Inc.  All Rights Reserved
 .\"
-.TH MAIL 1 "Jul 24, 2008"
+.TH MAIL 1 "May 17, 2020"
 .SH NAME
 mail, rmail \- read mail or send mail to users
 .SH SYNOPSIS
 .SS "Sending Mail"
-.LP
 .nf
 \fBmail\fR [\fB-tw\fR] [\fB-m\fR \fImessage_type\fR] \fIrecipient\fR...
 .fi
@@ -60,20 +59,16 @@ mail, rmail \- read mail or send mail to users
 .fi
 
 .SS "Reading Mail"
-.LP
 .nf
 \fBmail\fR [\fB-ehpPqr\fR] [\fB-f\fR \fIfile\fR]
 .fi
 
 .SS "Debugging"
-.LP
 .nf
 \fBmail\fR [\fB-x\fR \fIdebug_level\fR] [\fIother_mail_options\fR] \fIrecipient\fR...
 .fi
 
 .SH DESCRIPTION
-.sp
-.LP
 A \fIrecipient\fR is usually a domain style address
 ("\fIuser\fR@\fImachine\fR") or a user name recognized by \fBlogin\fR(1). When
 \fIrecipient\fRs are named, \fBmail\fR assumes a message is being sent. It
@@ -119,8 +114,6 @@ consists of only header lines with no message content. Header lines may be
 continued on the following line if that line starts with white space.
 .SH OPTIONS
 .SS "Sending Mail"
-.sp
-.LP
 The following command-line arguments affect sending mail:
 .sp
 .ne 2
@@ -202,8 +195,6 @@ extended network (such as \fBsysa!sysb!sysc!user\fR or
 .RE
 
 .SS "Reading Mail"
-.sp
-.LP
 The following command-line arguments affect reading mail:
 .sp
 .ne 2
@@ -545,8 +536,6 @@ preservation using the \fBDEL_EMPTY_MAILFILE\fR option of \fBmailcnfg\fR.)
 The group \fBID\fR of the mailfile must be \fBmail\fR to allow new messages to
 be delivered, and the mailfile must be writable by group \fBmail\fR.
 .SS "Debugging"
-.sp
-.LP
 The following command-line arguments cause \fBmail\fR to provide debugging
 information:
 .sp
@@ -572,8 +561,6 @@ overrides any specification of \fBDEBUG\fR in \fB/etc/mail/mailcnfg\fR. The
 information provided by the \fB-x\fR option is esoteric and is probably only
 useful to system administrators.
 .SS "Delivery Notification"
-.sp
-.LP
 Several forms of notification are available for mail by including one of the
 following lines in the message header.
 .sp
@@ -640,8 +627,6 @@ Same as \fB/return\fR except that the original message is not returned.
 The default is \fB/nodelivery/return\fR. If contradictory options are used, the
 first is recognized and later, conflicting, terms are ignored.
 .SH OPERANDS
-.sp
-.LP
 The following operand is supported for sending mail:
 .sp
 .ne 2
@@ -654,14 +639,10 @@ recognized by \fBlogin\fR(1).
 .RE
 
 .SH USAGE
-.sp
-.LP
 See \fBlargefile\fR(5) for the description of the behavior of \fBmail\fR and
 \fBrmail\fR when encountering files greater than or equal to 2 Gbyte ( 2^31
 bytes).
 .SH ENVIRONMENT VARIABLES
-.sp
-.LP
 See \fBenviron\fR(5) for descriptions of the following environment variables
 that affect the execution of \fBmail\fR: \fBLC_CTYPE\fR, \fBLC_MESSAGES\fR, and
 \fBNLSPATH\fR.
@@ -675,8 +656,6 @@ Determine the timezone used with date and time strings.
 .RE
 
 .SH EXIT STATUS
-.sp
-.LP
 The following exit values are returned:
 .sp
 .ne 2
@@ -706,7 +685,6 @@ An error occurred after initialization.
 .RE
 
 .SH FILES
-.sp
 .ne 2
 .na
 \fB\fBdead.letter\fR\fR
@@ -782,15 +760,13 @@ incoming mail for \fIuser\fR; that is, the \fImailfile\fR
 .sp
 .ne 2
 .na
-\fB\fBvar/tmp/ma\fR*\fR
+\fB\fB/var/tmp/ma\fR*\fR
 .ad
 .RS 20n
 temporary file
 .RE
 
 .SH SEE ALSO
-.sp
-.LP
 \fBchmod\fR(1), \fBcsh\fR(1), \fBlogin\fR(1), \fBmailx\fR(1), \fBuucp\fR(1C),
 \fBuuencode\fR(1C), \fBvacation\fR(1), \fBwrite\fR(1), \fBattributes\fR(5),
 \fBenviron\fR(5), \fBlargefile\fR(5)
@@ -798,8 +774,6 @@ temporary file
 .LP
 \fISolaris Advanced User\&'s Guide\fR
 .SH NOTES
-.sp
-.LP
 The interpretation and resulting action taken because of the header lines
 described in the Delivery Notifications section only occur if this version of
 \fBmail\fR is installed on the system where the delivery (or failure) happens.
diff --git a/usr/src/man/man1/wait.1 b/usr/src/man/man1/wait.1
index 6708415364..67e87e8a95 100644
--- a/usr/src/man/man1/wait.1
+++ b/usr/src/man/man1/wait.1
@@ -45,23 +45,20 @@
 .\" Portions Copyright (c) 1982-2007 AT&T Knowledge Ventures
 .\" Copyright (c) 2008, Sun Microsystems, Inc. All Rights Reserved
 .\"
-.TH WAIT 1 "Mar 13, 2008"
+.TH WAIT 1 "May 17, 2020"
 .SH NAME
 wait \- await process completion
 .SH SYNOPSIS
-.LP
 .nf
 
 .fi
 
 .SS "/bin/sh"
-.LP
 .nf
 \fBwait\fR [\fIpid\fR]...
 .fi
 
 .SS "/bin/jsh /bin/ksh /usr/xpg4/bin/sh"
-.LP
 .nf
 \fBwait\fR [\fIpid\fR]...
 .fi
@@ -72,20 +69,16 @@ wait \- await process completion
 .fi
 
 .SS "/bin/csh"
-.LP
 .nf
 \fBwait\fR
 .fi
 
 .SS "ksh93"
-.LP
 .nf
 \fBwait\fR [\fIjob...\fR]
 .fi
 
 .SH DESCRIPTION
-.sp
-.LP
 The shell itself executes \fBwait\fR, without creating a new process. If you
 get the error message \fBcannot fork,too many processes\fR, try using the
 \fBwait\fR command to clean up your background processes. If this doesn't help,
@@ -97,8 +90,6 @@ associated with your login, and to the number the system can keep track of.
 Not all the processes of a pipeline with three or more stages are children of
 the shell, and thus cannot be waited for.
 .SS "/bin/sh, /bin/jsh"
-.sp
-.LP
 Wait for your background process whose process \fBID\fR is \fIpid\fR and report
 its termination status. If \fIpid\fR is omitted, all your shell's currently
 active background processes are waited for and the return code is \fB0\fR. The
@@ -109,12 +100,8 @@ and the argument, \fIjobid\fR, is preceded by a percent sign (\fB%\fR).
 If \fIpid\fR is not an active process \fBID,\fR the \fBwait\fR utility returns
 immediately and the return code is \fB0\fR.
 .SS "csh"
-.sp
-.LP
 Wait for your background processes.
 .SS "ksh"
-.sp
-.LP
 When an asynchronous list is started by the shell, the process \fBID\fR of the
 last command in each element of the asynchronous list becomes known in the
 current shell execution environment.
@@ -138,8 +125,6 @@ is the exit status of the process requested by the last \fIpid\fR or
 The known process \fBID\fRs are applicable only for invocations of \fBwait\fR
 in the current shell execution environment.
 .SS "ksh93"
-.sp
-.LP
 wait with no operands, waits until all jobs known to the invoking shell have
 terminated. If one or more job operands are specified, wait waits until all of
 them have completed. Each job can be specified as one of the following:
@@ -212,12 +197,10 @@ Refers to the previous job
 
 .sp
 .LP
-If one ore more job operands is a process id or process group id not known by
+If one or more job operands is a process id or process group id not known by
 the current shell environment, \fBwait\fR treats each of them as if it were a
 process that exited with status 127.
 .SH OPERANDS
-.sp
-.LP
 The following operands are supported:
 .sp
 .ne 2
@@ -242,8 +225,6 @@ on systems supporting the job control option.
 .RE
 
 .SH USAGE
-.sp
-.LP
 On most implementations, \fBwait\fR is a shell built-in. If it is called in a
 subshell or separate utility execution environment, such as one of the
 following,
@@ -262,7 +243,6 @@ find . -exec wait ... \e;
 it returns immediately because there is no known process \fBID\fRs to wait for
 in those environments.
 .SH EXAMPLES
-.LP
 \fBExample 1 \fRUsing A Script To Identify The Termination Signal
 .sp
 .LP
@@ -315,15 +295,11 @@ wait %%
 .sp
 
 .SH ENVIRONMENT VARIABLES
-.sp
-.LP
 See \fBenviron\fR(5) for descriptions of the following environment variables
 that affect the execution of \fBwait\fR: \fBLANG\fR, \fBLC_ALL\fR,
 \fBLC_CTYPE\fR, \fBLC_MESSAGES\fR, and \fBNLSPATH\fR.
 .SH EXIT STATUS
 .SS "ksh93"
-.sp
-.LP
 The following exit values are returned by the \fBwait\fR built-in in
 \fBksh93\fR:
 .sp
@@ -347,8 +323,6 @@ shell environment.
 .RE
 
 .SH ATTRIBUTES
-.sp
-.LP
 See \fBattributes\fR(5) for descriptions of the following attributes:
 .sp
 
@@ -365,7 +339,5 @@ Standard	See \fBstandards\fR(5).
 .TE
 
 .SH SEE ALSO
-.sp
-.LP
 \fBcsh\fR(1), \fBjobs\fR(1), \fBksh\fR(1), \fBksh93\fR(1), \fBsh\fR(1),
 \fBattributes\fR(5), \fBenviron\fR(5), \fBstandards\fR(5)
diff --git a/usr/src/man/man1m/ipf.1m b/usr/src/man/man1m/ipf.1m
index 5797e8c28e..121556e83c 100644
--- a/usr/src/man/man1m/ipf.1m
+++ b/usr/src/man/man1m/ipf.1m
@@ -3,11 +3,10 @@
 .\" location.
 .\" Portions Copyright (c) 2009, Sun Microsystems Inc. All Rights Reserved.
 .\" Portions Copyright (c) 2015, Joyent, Inc.
-.TH IPF 1M "April 9, 2016"
+.TH IPF 1M "May 17, 2020"
 .SH NAME
 ipf \- alter packet filtering lists for IP packet input and output
 .SH SYNOPSIS
-.LP
 .nf
 \fBipf\fR [\fB-6AdDEGInoPRrsvVyzZ\fR] [\fB-l\fR block | pass | nomatch]
      [\fB-T\fR \fIoptionlist\fR] [\fB-F\fR i | o | a | s | S] \fB-f\fR \fIfilename\fR
@@ -15,7 +14,6 @@ ipf \- alter packet filtering lists for IP packet input and output
 .fi
 
 .SH DESCRIPTION
-.LP
 The \fBipf\fR utility is part of a suite of commands associated with the
 Solaris IP Filter feature. See \fBipfilter\fR(5).
 .sp
@@ -34,7 +32,6 @@ matching the order in which they appear when given to \fBipf\fR.
 \fB/dev/ipl\fR, and \fB/dev/ipstate\fR. The default permissions of these files
 require \fBipf\fR to be run as root for all operations.
 .SS "Enabling Solaris IP Filter Feature"
-.LP
 Solaris IP Filter is installed with the Solaris operating system. However,
 packet filtering is not enabled by default. Use the following procedure to
 activate the Solaris IP Filter feature.
@@ -61,7 +58,7 @@ See \fBipnat\fR(4).
 4.
 (Optional) Create an address pool configuration file. See \fBippool\fR(4).
 .sp
-Create an \fBipool.conf\fR file if you want to refer to a group of addresses as
+Create an \fBippool.conf\fR file if you want to refer to a group of addresses as
 a single address pool. If you want the address pool configuration file to be
 loaded at boot time, create a file called \fB/etc/ipf/ippool.conf\fR in which
 to put the address pool. If you do not want the address pool configuration file
@@ -158,7 +155,6 @@ If you reboot your system, the IPfilter configuration is automatically
 activated.
 .RE
 .SH OPTIONS
-.LP
 The following options are supported:
 .sp
 .ne 2
@@ -469,7 +465,6 @@ affect fragment or state statistics.
 .RE
 
 .SH ZONES
-.LP
 Each non-global zone has two ipfilter instances: the in-zone ipfilter, which
 can be controlled from both the zone itself and the global zone, and the
 Global Zone-controlled (GZ-controlled) instance, which can only be controlled
@@ -525,7 +520,6 @@ Contains numerous IP Filter examples.
 .RE
 
 .SH ATTRIBUTES
-.LP
 See \fBattributes\fR(5) for descriptions of the following attributes:
 .sp
 
@@ -540,7 +534,6 @@ Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
-.LP
 \fBipfstat\fR(1M), \fBipmon\fR(1M), \fBipnat\fR(1M), \fBippool\fR(1M),
 \fBsvcadm\fR(1M), \fBsvc.ipfd\fR(1M), \fBipf\fR(4), \fBipnat\fR(4),
 \fBippool\fR(4), \fBattributes\fR(5), \fBipfilter\fR(5), \fBzones(5)\fR
@@ -548,6 +541,5 @@ Interface Stability	Committed
 .LP
 \fI\fR
 .SH DIAGNOSTICS
-.LP
 Needs to be run as root for the packet filtering lists to actually be affected
 inside the kernel.
diff --git a/usr/src/man/man1m/luxadm.1m b/usr/src/man/man1m/luxadm.1m
index 71fc381a8c..4bd782458b 100644
--- a/usr/src/man/man1m/luxadm.1m
+++ b/usr/src/man/man1m/luxadm.1m
@@ -3,18 +3,16 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH LUXADM 1M "May 13, 2017"
+.TH LUXADM 1M "May 17, 2020"
 .SH NAME
 luxadm \- administer Sun Fire 880 storage subsystem and FC_AL devices
 .SH SYNOPSIS
-.LP
 .nf
 \fBluxadm\fR [\fIoptions\fR]... \fIsubcommand\fR [\fIoptions\fR]... \fIenclosure\fR
      [,\fIdev\fR] | \fIpathname\fR...
 .fi
 
 .SH DESCRIPTION
-.LP
 The \fBluxadm\fR program is an administrative command that manages the
 \fBSENA\fR, Sun Fire 880 internal storage subsystem, and individual Fiber
 Channel Arbitrated Loop (\fBFC_AL\fR) devices. \fBluxadm\fR performs a variety
@@ -36,7 +34,6 @@ of the \fBSENA\fR enclosure, and an optional identifier for the particular
 device in the enclosure. The individual \fBFC_AL\fR devices may be specified by
 entering the \fBWWN\fR for the device or a port to the device.
 .SS "Pathname"
-.LP
 Specify the device or controller by either a complete physical pathname or a
 complete logical pathname.
 .sp
@@ -120,7 +117,6 @@ and a typical logical pathname is:
 .sp
 
 .SS "Enclosure"
-.LP
 For \fBSENA,\fR a device may be identified by its enclosure name and slotname:
 .br
 .in +2
@@ -169,7 +165,6 @@ the disk slot number in the Sun Fire 880 internal storage subsystem, \fB0\fR -
 See \fBdisks\fR(1M) and \fBdevlinks\fR(1M) for additional information on
 logical names for disks and subsystems.
 .SH OPTIONS
-.LP
 The following options are supported by all subcommands:
 .sp
 .ne 2
@@ -194,7 +189,6 @@ Verbose mode.
 Options that are specific to particular subcommands are described with the
 subcommand in the \fBUSAGE\fR section.
 .SH OPERANDS
-.LP
 The following operands are supported:
 .sp
 .ne 2
@@ -315,7 +309,7 @@ pathname.
 When the \fBSENA's\fR download is complete, the \fBSENA\fR will be reset and
 the downloaded code executed. If no filename is specified, the default prom
 image will be used. The default prom image for the \fBSENA\fR is in the
-directory \fBusr/lib/locale/C/LC_MESSAGES\fR and is named \fBibfirmware\fR
+directory \fB/usr/lib/locale/C/LC_MESSAGES\fR and is named \fBibfirmware\fR
 .sp
 When the Sun Fire 880 internal storage subsystem's download is complete, the
 subsystem resets and the downloaded code begins execution. The default firmware
@@ -746,7 +740,6 @@ Spin down the specified disks in a SENA.
 .RE
 
 .SS "SENA, Sun Fire 880 Internal Storage Subsystem, and Individual FC_AL Drive Expert Mode Subcommands"
-.LP
 The following subcommands are for expert use only, and are applicable only to
 the \fBSENA\fR, Sun Fire 880 internal storage subsystem, and fiber channel
 loops. They should only be used by users that are knowledgeable about the
@@ -867,7 +860,6 @@ the loop that contains the device specified by the enclosure or pathname.
 .RE
 
 .SS "Other Expert Mode Subcommands"
-.LP
 See \fBNOTES\fR for limitations of these subcommands. They should only be used
 by users that are knowledgeable about the systems they are managing.
 .sp
@@ -955,7 +947,6 @@ Put the specified device online.
 .RE
 
 .SH EXAMPLES
-.LP
 \fBExample 1 \fRDisplaying the \fBSENA\fRs and Individual FC_AL Devices on a
 System
 .sp
@@ -1207,11 +1198,9 @@ example# \fBluxadm release /dev/rdsk/c1t8d0s2\fR
 .sp
 
 .SH ENVIRONMENT VARIABLES
-.LP
 See \fBenviron\fR(5) for a description of the \fBLANG\fR environment variable
 that affects the execution of \fBluxadm\fR.
 .SH EXIT STATUS
-.LP
 The following exit values are returned:
 .sp
 .ne 2
@@ -1234,7 +1223,7 @@ An error occurred.
 .SH FILES
 .ne 2
 .na
-\fB\fBusr/lib/firmware/fc_s/fc_s_fcode\fR\fR
+\fB\fB/usr/lib/firmware/fc_s/fc_s_fcode\fR\fR
 .ad
 .sp .6
 .RS 4n
@@ -1244,7 +1233,7 @@ An error occurred.
 .sp
 .ne 2
 .na
-\fB\fBusr/lib/locale/C/LC_MESSAGES/ibfirmware\fR\fR
+\fB\fB/usr/lib/locale/C/LC_MESSAGES/ibfirmware\fR\fR
 .ad
 .sp .6
 .RS 4n
@@ -1252,11 +1241,9 @@ An error occurred.
 .RE
 
 .SH SEE ALSO
-.LP
 \fBdevlinks\fR(1M), \fBdisks\fR(1M), \fBattributes\fR(5), \fBenviron\fR(5),
 \fBses\fR(7D)
 .SH NOTES
-.LP
 Currently, only some device drivers
 support hot plugging. If hot plugging is attempted on a disk or bus where it is
 not supported, an error message of the form:
diff --git a/usr/src/man/man4/proc.4 b/usr/src/man/man4/proc.4
index b53db24537..53714657e5 100644
--- a/usr/src/man/man4/proc.4
+++ b/usr/src/man/man4/proc.4
@@ -18,7 +18,7 @@
 .\" fields enclosed by brackets "[]" replaced with your own identifying
 .\" information: Portions Copyright [yyyy] [name of copyright owner]
 .\"
-.Dd January 6, 2020
+.Dd May 17, 2020
 .Dt PROC 4
 .Os
 .Sh NAME
@@ -483,7 +483,7 @@ is the total number of active lwps in the process.
 is the total number of zombie lwps in the process.
 A zombie lwp is a non-detached lwp that has terminated but has not been reaped
 with
-.Xr thr_join 3
+.Xr thr_join 3C
 or
 .Xr pthread_join 3C .
 .Pp
diff --git a/usr/src/man/man5/lf64.5 b/usr/src/man/man5/lf64.5
index f1be4e3d83..f2c59d78a6 100644
--- a/usr/src/man/man5/lf64.5
+++ b/usr/src/man/man5/lf64.5
@@ -4,11 +4,10 @@
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
 .\" Copyright (c) 2015, Joyent, Inc.  All rights reserved.
-.TH LF64 5 "Jan 14, 2015"
+.TH LF64 5 "May 17, 2020"
 .SH NAME
 lf64 \- transitional interfaces for 64-bit file offsets
 .SH DESCRIPTION
-.LP
 The data types, interfaces, and macros described on this page provide explicit
 access to 64-bit file offsets. They are accessible through the transitional
 compilation environment described on the \fBlfcompile64\fR(5) manual page. The
@@ -16,7 +15,6 @@ function prototype and semantics of a transitional interface are equivalent to
 those of the standard version of the call, except that relevant data types are
 64-bit entities.
 .SS "Data Types"
-.LP
 The following tables list the standard data or struct types in the left-hand
 column and their  corresponding explicit 64-bit file offset types in the
 right-hand column, grouped by header. The absence of an entry in the  left-hand
@@ -99,7 +97,7 @@ l l .
 struct \fBstatvfs\fR	struct \fBstatvfs64\fR
    \fBfsblkcnt_t\fR f_blocks;	   \fBfsblkcnt64_t\fR f_blocks;
    \fBfsblkcnt_t\fR f_bfree;	   \fBfsblkcnt64_t\fR f_bfree;
-   \fBfsblkcnt_t\fR f_bavial;	   \fBfsblkcnt64_t\fR f_bavial;
+   \fBfsblkcnt_t\fR f_bavail;	   \fBfsblkcnt64_t\fR f_bavail;
    \fBfsfilcnt_t\fR  f_files;	   \fBfsfilcnt64_t\fR  f_files;
    \fBfsfilcnt_t\fR  f_ffree;	   \fBfsfilcnt64_t\fR  f_ffree;
    \fBfsfilcnt_t\fR  f_favail;	   \fBfsfilcnt64_t\fR  f_favail;
@@ -138,7 +136,6 @@ l l .
 .TE
 
 .SS "System Interfaces"
-.LP
 The following tables display the standard API and the corresponding
 transitional  interfaces for 64-bit file offsets. The interfaces are grouped by
 header. The interface name and the affected data types are displayed in courier
@@ -148,11 +145,11 @@ font.
 .TS
 l l
 l l .
-int \fBaio_cancel\fR(..., 	int \fBaio_cancel64\fR(...,
+int \fBaio_cancel\fR(...,	int \fBaio_cancel64\fR(...,
    struct \fBaiocb\fR *);	   struct \fBaiocb64\fR *);
 int \fBaio_error\fR(	int \fBaio_error64\fR(
    const struct \fBaiocb\fR *);	   const struct \fBaiocb64\fR *);
-int \fBaio_fsync\fR(..., 	int \fBaio_fsync64\fR(...,
+int \fBaio_fsync\fR(...,	int \fBaio_fsync64\fR(...,
    struct \fBaiocb\fR *);	   struct \fBaiocb64\fR *);
 int \fBaio_read\fR(struct \fBaiocb\fR *);	int \fBaio_read64\fR(struct \fBaiocb64\fR *);
 int \fBaio_return\fR(struct \fBaiocb\fR *);	int \fBaio_return64\fR(struct \fBaiocb64\fR *);
@@ -161,7 +158,7 @@ int \fBaio_suspend\fR(	int \fBaio_suspend64\fR(
 int \fBaio_waitn\fR(aiocb_t *[],	int \fBaio_waitn64\fR(aiocb64_t *[],
    ...);	   ...);
 int \fBaio_write\fR(struct \fBaiocb\fR *);	int \fBaio_write64\fR(struct \fBaiocb64\fR *);
-int \fBlio_listio\fR(..., 	int \fBlio_listio64\fR(...,
+int \fBlio_listio\fR(...,	int \fBlio_listio64\fR(...,
    const struct \fBaiocb\fR *, ...);	   const struct \fBaiocb64\fR *, ...);
 .TE
 
@@ -171,12 +168,12 @@ int \fBlio_listio\fR(..., 	int \fBlio_listio64\fR(...,
 l l
 l l .
 int \fBalphasort\fR(	int \fBalphasort64\fR(
-   const struct dirent **, 	   const struct dirent64 **,
+   const struct dirent **,	   const struct dirent64 **,
    const struct dirent **)	   const struct dirent64 **)
 struct \fBdirent *\fR\fBreaddir()\fR;	struct \fBdirent64 *\fR\fBreaddir64()\fR;
 struct \fBdirent *\fR\fBreaddir_r()\fR;	struct \fBdirent64 *\fR\fBreaddir64_r()\fR;
-int \fBscandir\fR(..., 	int \fBscandir64\fR(...,
-   struct dirent *(*[]), 	   struct dirent64 *(*[]),
+int \fBscandir\fR(...,	int \fBscandir64\fR(...,
+   struct dirent *(*[]),	   struct dirent64 *(*[]),
    int (*)(const struct dirent *),	   int (*)(const struct dirent64 *),
    int (*)(const struct dirent **,	   int (*)(const struct dirent64 **,
       const struct dirent **))	      const struct dirent64 **))
@@ -202,10 +199,10 @@ l l
 l l .
 int \fBftw\fR(...,	int \fBftw64\fR(...,
    const struct \fBstat\fR *, ...);	   const struct \fBstat64\fR *, ...);
-	
+
 int \fBnftw\fR(..	int \fBnftw64\fR(...,
    const struct \fBstat\fR *, ...);	   const struct \fBstat64\fR *,  ...);
-	
+
 .TE
 
 .SS "<\fBlibgen.h\fR>"
@@ -252,7 +249,7 @@ int \fBaiowrite\fR(..., \fBoff_t\fR, ...);	int \fBaiowrite64\fR(..., \fBoff64_t\
 l l
 l l .
 int \fBgetdents\fR(..., \fBdirent\fR);	int \fBgetdents64\fR(..., \fBdirent64\fR);
-	
+
 .TE
 
 .SS "<\fBsys/mman.h\fR>"
@@ -278,11 +275,11 @@ int \fBsetrlimit\fR(...,	int \fBsetrlimit64\fR(...,
 .TS
 l l
 l l .
-ssize_t \fBsendfile\fR(..., 	ssize_t \fBsendfile64\fR(...,
+ssize_t \fBsendfile\fR(...,	ssize_t \fBsendfile64\fR(...,
    \fBoff_t\fR *, ...);	   \fBoff64_t\fR *, ...);
-ssize_t \fBsendfilev\fR(..., const 	ssize_t \fBsendfilev64\fR(..., const
+ssize_t \fBsendfilev\fR(..., const	ssize_t \fBsendfilev64\fR(..., const
    struct \fBsendfilevec\fR *,  ...);	  struct \fBsendfilevec64\fR *, ...);
-	
+
 .TE
 
 .SS "<\fBsys/stat.h\fR>"
@@ -291,7 +288,7 @@ ssize_t \fBsendfilev\fR(..., const 	ssize_t \fBsendfilev64\fR(..., const
 l l
 l l .
 int \fBfstat\fR(..., struct \fBstat\fR *);	int \fBfstat64\fR(...,  struct \fBstat64\fR *);
-int \fBfstatat\fR(..., 	int \fBfstatat64\fR(...,
+int \fBfstatat\fR(...,	int \fBfstatat64\fR(...,
    struct \fBstat\fR *, int);	   struct \fBstat64\fR *, int);
 int \fBlstat\fR(..., struct \fBstat\fR *);	int \fBlstat64\fR(..., struct \fBstat64\fR *);
 int \fBstat\fR(..., struct \fBstat\fR *);	int \fBstat64\fR(..., struct \fBstat64\fR *);
@@ -304,7 +301,7 @@ l l
 l l .
 int \fBstatvfs\fR(...,	int \fBstatvfs64\fR(...,
    struct \fBstatvfs\fR *);	   struct \fBstatvfs64\fR *);
-int \fBfstatvfs\fR(..., 	int \fBfstatvfs64\fR(...,
+int \fBfstatvfs\fR(...,	int \fBfstatvfs64\fR(...,
    struct \fBstatvfs\fR *);	  struct \fBstatvfs64\fR *);
 .TE
 
@@ -328,7 +325,7 @@ int \fBalphasort\fR(	int \fBalphasort64\fR(
 struct \fBdirect *\fR\fBreaddir()\fR;	struct \fBdirect64 *\fR\fBreaddir64()\fR;
 int \fBscandir\fR(...,	int \fBscandir64\fR(...,
    struct \fBdirect\fR *(*[]);,  ...);	   struct \fBdirect64\fR *(*[]);,  ...);
-	
+
 .TE
 
 .SS "<\fBunistd.h\fR>"
@@ -347,5 +344,4 @@ int \fBtruncate\fR(..., \fBoff_t\fR);	int \fBtruncate64\fR(..., \fBoff64_t\fR);
 .TE
 
 .SH SEE ALSO
-.LP
 \fBlfcompile\fR(5), \fBlfcompile64\fR(5)
diff --git a/usr/src/man/man7d/ecpp.7d b/usr/src/man/man7d/ecpp.7d
index 7d10e4ee9c..dc5259dbdf 100644
--- a/usr/src/man/man7d/ecpp.7d
+++ b/usr/src/man/man7d/ecpp.7d
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ECPP 7D "Jan 10, 2020"
+.TH ECPP 7D "May 17, 2020"
 .SH NAME
 ecpp \- IEEE 1284 compliant parallel port driver
 .SH SYNOPSIS
@@ -25,7 +25,7 @@ ecpp@unit-address
 The \fBecpp\fR driver provides a bi-directional interface to \fIIEEE 1284\fR
 compliant devices as well as a forward single-directional interface to
 Centronics devices. In addition to the Centronics protocol, the \fBecpp\fR
-driver supports the \fIIEEE 1284\fRCompatibility, Nibble, and ECP protocols.
+driver supports the \fIIEEE 1284\fR Compatibility, Nibble, and ECP protocols.
 \fBECPP_COMPAT_MODE\fR and \fBECPP_CENTRONICS\fR modes of operation have
 logically identical handshaking protocols, however devices that support
 \fBECPP_COMPAT_MODE\fR are \fIIEEE 1284\fR compliant devices. \fIIEEE 1284\fR
@@ -231,8 +231,7 @@ conditions are ok, \fB0\fR is returned. Otherwise, \fB-1\fR is returned, errno
 is set to \fBEIO\fR and the state of the status pins is captured. The captured
 status can be retrieved using the \fBBPPIOC_GETERR\fR \fBioctl\fR(2) call. The
 \fBtimeout_occurred\fR and \fBbus_error\fR fields will never be set by this
-\fBioctl\fR(2). \fBBPPIOC_TESTIO\fR and \fBBPPIOC_GETERR\fR are compatible to
-the ioctls specified in \fBbpp\fR(7D).
+\fBioctl\fR(2).
 .RE
 
 .sp
@@ -450,7 +449,7 @@ Interface stability	Evolving
 .SH SEE ALSO
 \fBmodload\fR(1M), \fBmodunload\fR(1M), \fBupdate_drv\fR(1M), \fBioctl\fR(2),
 \fBopen\fR(2), \fBread\fR(2), \fBwrite\fR(2), \fBattributes\fR(5),
-\fBbpp\fR(7D), \fBusbprn\fR(7D), \fBprnio\fR(7I), \fBstreamio\fR(7I)
+\fBusbprn\fR(7D), \fBprnio\fR(7I), \fBstreamio\fR(7I)
 .sp
 .LP
 \fIIEEE Std 1284-1994\fR
@@ -464,4 +463,3 @@ Interface stability	Evolving
 Driver does not support parallel port controller on the given host. Attach
 failed.
 .RE
-
diff --git a/usr/src/man/man7d/usbprn.7d b/usr/src/man/man7d/usbprn.7d
index b28b0a7626..9f5d326917 100644
--- a/usr/src/man/man7d/usbprn.7d
+++ b/usr/src/man/man7d/usbprn.7d
@@ -3,11 +3,10 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH USBPRN 7D "May 13, 2017"
+.TH USBPRN 7D "May 17, 2020"
 .SH NAME
 usbprn \- USB printer class driver
 .SH SYNOPSIS
-.LP
 .nf
 #include <sys/usb/clients/printer/usb_printer.h>
 .fi
@@ -23,7 +22,6 @@ usbprn@unit-address
 .fi
 
 .SH DESCRIPTION
-.LP
 The \fBusbprn\fR driver is a USBA (Solaris USB Architecture) compliant client
 driver that supports the \fIUSB Printer Class 1.0\fR specification. The
 \fBusbprn\fR driver supports a subset of the \fBecpp\fR(7D) parallel port
@@ -44,14 +42,12 @@ queue. For USB connected printers, it attempts to pre-select the
 manufacturer and model information based on the 1284 device id supplied by the
 printer.
 .SS "UGEN (Generic USB)"
-.LP
 The \fBusbprn\fR driver also supports a \fBugen\fR(7D) interface allowing raw
 access to the device, for example by libusb applications, by
 passing the drivers bound to each interface. Because a libusb application might
 change the state of the device, you should not access the device through the
 child interface drivers.
 .SH DEFAULT OPERATION
-.LP
 With certain minor exceptions (outlined in the Notes sections below), the
 \fBusbprn\fR driver supports a subset of the \fBecpp\fR(7D) ioctl interfaces:
 .sp
@@ -73,7 +69,6 @@ to their default values with each \fBattach\fR(9E). (The \fBecpp\fR(7D) driver
 resets configuration variables with each \fBopen\fR(2).)
 .RE
 .SH WRITE OPERATION
-.LP
 A \fBwrite\fR(2) operation returns the number of bytes successfully written to
 the device. If a failure occurs while a driver is transferring data to printer,
 the contents of the status bits are captured at the time of the error and can
@@ -81,7 +76,6 @@ be retrieved by the application program using the ECPPIOC_GETERR \fBioctl\fR(2)
 call. The captured status information is overwritten each time an
 ECPPIOC_TESTIO \fBioctl\fR(2) occurs.
 .SH IOCTLS
-.LP
 The \fBusbprn\fR driver supports \fBprnio\fR(7I) interfaces. Note that the
 \fBPRNIOC_RESET\fR command has no effect on USB printers.
 .sp
@@ -154,8 +148,6 @@ determine if a \fBwrite\fR(2) will succeed. If status bits are set, a transfer
 will fail. If a transfer will succeed, zero is returned. If a transfer fails,
 the driver returns \fBEIO\fR and the state of the status bits are captured. The
 captured status can be retrieved using the BPPIOC_GETERR \fBioctl\fR(2) call.
-BPPIOC_TESTIO and BPPIOC_GETERR are compatible to the ioctls specified in
-\fBbpp\fR(7D).
 .LP
 Note -
 .sp
@@ -243,7 +235,6 @@ Unlike \fBecpp\fR(7D), only the ECPP_CENTRONICS mode is currently supported in
 .RE
 
 .SH READ OPERATION
-.LP
 The \fBread\fR operation is not supported and returns \fBEIO\fR.
 .SH ERRORS
 .ne 2
@@ -354,7 +345,6 @@ Character special files
 .RE
 
 .SH ATTRIBUTES
-.LP
 See \fBattributes\fR(5) for descriptions of the following attributes:
 .sp
 
@@ -369,10 +359,9 @@ Architecture	SPARC, x86, PCI-based systems
 .TE
 
 .SH SEE ALSO
-.LP
 \fBcfgadm_usb\fR(1M), \fBprintmgr\fR(1M), \fBioctl\fR(2), \fBopen\fR(2),
 \fBread\fR(2), \fBwrite\fR(2), \fBattributes\fR(5),
-\fBbpp\fR(7D), \fBecpp\fR(7D), \fBugen\fR(7D), \fBusba\fR(7D), \fBprnio\fR(7I),
+\fBecpp\fR(7D), \fBugen\fR(7D), \fBusba\fR(7D), \fBprnio\fR(7I),
 \fBattach\fR(9E)
 .sp
 .LP
@@ -387,7 +376,6 @@ Architecture	SPARC, x86, PCI-based systems
 .LP
 \fISystem Administration Guide: Basic Administration\fR
 .SH DIAGNOSTICS
-.LP
 In addition to being logged, the following messages may appear on the system
 console. All messages are formatted in the following manner:
 .sp
@@ -446,7 +434,6 @@ to the hot-removal may be lost.
 .RE
 
 .SH NOTES
-.LP
 The USB printer will be power managed if the device is closed.
 .sp
 .LP