remove some of the files we don't obviously need

19 files changed, 0 insertions, 2188 deletions

diff --git a/usr/src/uts/common/io/qede/579xx/drivers/ecore/Remove_from_ecore_files_solaris.txt b/usr/src/uts/common/io/qede/579xx/drivers/ecore/Remove_from_ecore_files_solaris.txt
deleted file mode 100644
index eeb79a22cd..0000000000
--- a/usr/src/uts/common/io/qede/579xx/drivers/ecore/Remove_from_ecore_files_solaris.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-From Directory 579xx/drivers/ecore :

-

-core

-ecore.vcxproj

-ecore_chain.c

-ecore_dbg_values.bin

-ecore_fcoe.c

-ecore_hsi_eth.h

-ecore_hsi_iwarp.h

-ecore_iscsi.c

-ecore_ll2.c

-ecore_mng_tlv.c

-ecore_ooo.c

-ecore_ptp.c

-ecore_ptp.h

-ecore_roce.c

-ecore_self_test.c

-ecore_sriov.c

-ecore_tcp_ip.h

-ecore_user_dbg_fw_funcs.c

-ecore_vf.c

-

-From Directory 579xx/drivers/ecore/hsi_repository :

-drv_fcoe_fw_funcs.c

-drv_fcoe_fw_funcs.h

-drv_iscsi_fw_funcs.c

-drv_iscsi_fw_funcs.h

-drv_scsi_fw_funcs.c

-drv_scsi_fw_funcs.h
\ No newline at end of file
diff --git a/usr/src/uts/common/io/qede/579xx/drivers/ecore/ecore.vpj b/usr/src/uts/common/io/qede/579xx/drivers/ecore/ecore.vpj
deleted file mode 100644
index 9dea8e23db..0000000000
--- a/usr/src/uts/common/io/qede/579xx/drivers/ecore/ecore.vpj
+++ /dev/null
@@ -1,122 +0,0 @@
-<!DOCTYPE Project SYSTEM "http://www.slickedit.com/dtd/vse/10.0/vpj.dtd">
-<Project
-	Version="10.0"
-	VendorName="SlickEdit"
-	WorkingDir="."
-	VCSProject="SCC:Perforce SCM:drv-win-michals-work">
-	<Config
-		Name="Release"
-		OutputFile=""
-		CompilerConfigName="Latest Version">
-		<Menu>
-			<Target
-				Name="Compile"
-				MenuCaption="&amp;Compile"
-				CaptureOutputWith="ProcessBuffer"
-				SaveOption="SaveCurrent"
-				RunFromDir="%rw">
-				<Exec/>
-			</Target>
-			<Target
-				Name="Build"
-				MenuCaption="&amp;Build"
-				CaptureOutputWith="ProcessBuffer"
-				SaveOption="SaveWorkspaceFiles"
-				RunFromDir="%rw">
-				<Exec/>
-			</Target>
-			<Target
-				Name="Rebuild"
-				MenuCaption="&amp;Rebuild"
-				CaptureOutputWith="ProcessBuffer"
-				SaveOption="SaveWorkspaceFiles"
-				RunFromDir="%rw">
-				<Exec/>
-			</Target>
-			<Target
-				Name="Debug"
-				MenuCaption="&amp;Debug"
-				SaveOption="SaveNone"
-				RunFromDir="%rw">
-				<Exec/>
-			</Target>
-			<Target
-				Name="Execute"
-				MenuCaption="E&amp;xecute"
-				SaveOption="SaveNone"
-				RunFromDir="%rw">
-				<Exec CmdLine='"ecore.exe"'/>
-			</Target>
-		</Menu>
-	</Config>
-	<Files>
-		<Folder
-			Name="Source Files"
-			Filters="*.c;*.C;*.cc;*.cpp;*.cp;*.cxx;*.prg;*.pas;*.dpr;*.asm;*.s;*.bas;*.java;*.cs;*.sc;*.e;*.cob;*.html;*.rc;*.tcl;*.py;*.pl">
-			<F N="tools/e2l.pl"/>
-			<F N="ecore_cxt.c"/>
-			<F N="ecore_dev.c"/>
-			<F N="ecore_fcoe.c"/>
-			<F N="ecore_fw_funcs.c"/>
-			<F N="ecore_hw.c"/>
-			<F N="ecore_init_ops.c"/>
-			<F N="ecore_int.c"/>
-			<F N="ecore_iscsi.c"/>
-			<F N="ecore_ll2.c"/>
-			<F N="ecore_mcp.c"/>
-			<F N="ecore_roce.c"/>
-			<F N="ecore_sp_commands.c"/>
-			<F N="ecore_l2.c"/>
-			<F N="ecore_spq.c"/>
-			<F N="ecore_sriov.c"/>
-			<F N="ecore_vf.c"/>
-		</Folder>
-		<Folder
-			Name="Header Files"
-			Filters="*.h;*.H;*.hh;*.hpp;*.hxx;*.inc;*.sh;*.cpy;*.if">
-			<F N="ecore.h"/>
-			<F N="ecore_attn_defs.h"/>
-			<F N="ecore_attn_values.h"/>
-			<F N="ecore_hw.h"/>
-			<F N="ecore_chain.h"/>
-			<F N="ecore_cxt.h"/>
-			<F N="ecore_dev.h"/>
-			<F N="ecore_err.h"/>
-			<F N="ecore_fcoe.h"/>
-			<F N="ecore_fw_funcs.h"/>
-			<F N="ecore_gtt_reg_addr.h"/>
-			<F N="ecore_gtt_values.h"/>
-			<F N="ecore_hsi_common.h"/>
-			<F N="ecore_hsi_eth.h"/>
-			<F N="ecore_hsi_fcoe.h"/>
-			<F N="ecore_hsi_iscsi.h"/>
-			<F N="ecore_hsi_toe.h"/>
-			<F N="ecore_hw_defs.h"/>
-			<F N="ecore_hwif.h"/>
-			<F N="ecore_init_defs.h"/>
-			<F N="ecore_init_ops.h"/>
-			<F N="ecore_init_values.h"/>
-			<F N="ecore_init_values_zipped.h"/>
-			<F N="ecore_int.h"/>
-			<F N="ecore_iro.h"/>
-			<F N="ecore_iro_values.h"/>
-			<F N="ecore_iscsi.h"/>
-			<F N="ecore_ll2.h"/>
-			<F N="ecore_mcp.h"/>
-			<F N="ecore_pcics_reg.h"/>
-			<F N="ecore_proto_if.h"/>
-			<F N="ecore_rt_defs.h"/>
-			<F N="ecore_sp_commands.h"/>
-			<F N="ecore_l2.h"/>
-			<F N="ecore_l2_api.h"/>
-			<F N="ecore_spq.h"/>
-			<F N="ecore_sriov.h"/>
-			<F N="ecore_status.h"/>
-			<F N="ecore_vf.h"/>
-			<F N="ecore_vfpf_if.h"/>
-			<F N="idle_check.sh"/>
-			<F N="../../hsi/hw/reg_addr.h"/>
-			<F N="tools/replace_fw.sh"/>
-		</Folder>
-	</Files>
-</Project>
diff --git a/usr/src/uts/common/io/qede/579xx/drivers/ecore/idle_check.sh b/usr/src/uts/common/io/qede/579xx/drivers/ecore/idle_check.sh
deleted file mode 100644
index 1467822a69..0000000000
--- a/usr/src/uts/common/io/qede/579xx/drivers/ecore/idle_check.sh
+++ /dev/null
@@ -1,421 +0,0 @@
-#!/bin/bash
-
-IDLE_CHECK_LOCATION=../../tools/idle_chk_build
-
-cat << end > ecore_self_test.c
-/* self test */
-
-#include "bcm_osal.h"
-#include "ecore_gtt_reg_addr.h"
-#include "ecore_hsi_common.h"
-#include "ecore.h"
-#include "ecore_hw.h"
-#include "reg_addr.h"
-
-/*statistics and error reporting*/
-static int idle_chk_errors;
-static int idle_chk_warnings;
-
-#define NA 0xCD
-
-#define IDLE_CHK_ERROR			1
-#define IDLE_CHK_ERROR_NO_TRAFFIC	2
-#define IDLE_CHK_WARNING		3
-
-#define MAX_FAIL_MSG 200
-
-#define SNPRINTF(a, ...)	do{a[0]=a[0];}while(0)	/* FIXME */
-
-/*struct for the argument list for a predicate in the self test database*/
-struct st_pred_args {
-	u32 val1; /* value read from first register*/
-	u32 val2; /* value read from second register, if applicable */
-	u32 imm1; /* 1st value in predicate condition, left-to-right */
-	u32 imm2; /* 2nd value in predicate condition, left-to-right */
-	u32 imm3; /* 3rd value in predicate condition, left-to-right */
-	u32 imm4; /* 4th value in predicate condition, left-to-right */
-};
-
-/*struct representing self test record - a single test*/
-struct st_record {
-	u8 chip_mask;
-	u8 macro;
-	u32 reg1;
-	u32 reg2;
-	u16 loop;
-	u16 incr;
-	int(*predicate)(struct st_pred_args *);
-	u32 reg3;
-	u8 severity;
-	char *failMsg;
-	struct st_pred_args pred_args;
-};
-
-/* predicates for self test */
-static int peq(struct st_pred_args *args)
-{
-	return (args->val1 == args->imm1);
-}
-
-static int pneq(struct st_pred_args *args)
-{
-	return (args->val1 != args->imm1);
-}
-
-static int pand_neq(struct st_pred_args *args)
-{
-	return ((args->val1 & args->imm1) != args->imm2);
-}
-
-static int pand_neq_x2(struct st_pred_args *args)
-{
-	return (((args->val1 & args->imm1) != args->imm2) &&
-		((args->val1 & args->imm3) != args->imm4));
-}
-
-static int pneq_err(struct st_pred_args *args)
-{
-	return ((args->val1 != args->imm1) && (idle_chk_errors > args->imm2));
-}
-
-static int pgt(struct st_pred_args *args)
-{
-	return (args->val1 > args->imm1);
-}
-
-static int pneq_r2(struct st_pred_args *args)
-{
-	return (args->val1 != args->val2);
-}
-
-static int plt_sub_r2(struct st_pred_args *args)
-{
-	return (args->val1 < (args->val2 - args->imm1));
-}
-
-static int pne_sub_r2(struct st_pred_args *args)
-{
-	return (args->val1 != (args->val2 - args->imm1));
-}
-
-static int prsh_and_neq(struct st_pred_args *args)
-{
-	return (((args->val1 >> args->imm1) & args->imm2) != args->imm3);
-}
-
-static int peq_neq_r2(struct st_pred_args *args)
-{
-	return ((args->val1 == args->imm1) && (args->val2 != args->imm2));
-}
-
-static int peq_neq_neq_r2(struct st_pred_args *args)
-{
-	return ((args->val1 == args->imm1) && (args->val2 != args->imm2) &&
-		(args->val2 != args->imm3));
-}
-
-/* handle self test fails according to severity and type*/
-static void ecore_self_test_log(struct ecore_dev *p_dev,
-				 u8 severity,
-				 char *p_message)
-{
-	switch (severity) {
-	case IDLE_CHK_ERROR:
-		DP_ERR(p_dev, "ERROR %s", p_message);
-		idle_chk_errors++;
-		break;
-	case IDLE_CHK_ERROR_NO_TRAFFIC:
-		DP_INFO(p_dev, "INFO %s", p_message);
-		break;
-	case IDLE_CHK_WARNING:
-		DP_NOTICE(p_dev, "WARNING %s", p_message);
-		idle_chk_warnings++;
-		break;
-	}
-}
-
-static void ecore_idle_reg_rd(struct ecore_path *p_path,
-			       u32		    *p_dst,
-			       u32		    reg,
-			       u32		    offset,
-			       int		    ptt)
-{
-	ecore_ptt_set_win(p_path, ptt, reg - (reg % 4)); /* FIXME */
-	*p_dst = REG_RD(p_path, offset + (reg % 4));
-}
-
-/*specific test for QM rd/wr pointers and rd/wr banks*/
-static void ecore_idle_chk6(struct ecore_path	*p_path,
-			     struct st_record	*p_rec,
-			     char		*p_message,
-			     int 		ptt)
-{
-	int i;
-	u32 rd_ptr, wr_ptr, rd_bank, wr_bank, offset;
-
-	offset = ecore_bar_get_ext_addr(p_path, ptt);
-
-	for (i = 0; i < p_rec->loop; i++) {
-		/* read regs */
-		ecore_idle_reg_rd(p_path, &p_rec->pred_args.val1,
-				  p_rec->reg1 + i * p_rec->incr, offset, ptt);
-		ecore_idle_reg_rd(p_path, &p_rec->pred_args.val2,
-				  p_rec->reg1 + i * p_rec->incr + 4, offset,
-				  ptt);
-
-		/* calc read and write pointers */
-		rd_ptr = ((p_rec->pred_args.val1 & 0x3FFFFFC0) >> 6);
-		wr_ptr = ((((p_rec->pred_args.val1 & 0xC0000000) >> 30) & 0x3) |
-			  ((p_rec->pred_args.val2 & 0x3FFFFF) << 2));
-
-		/* perfrom pointer test */
-		if (rd_ptr != wr_ptr) {
-			SNPRINTF(p_message, MAX_FAIL_MSG,
-				 "QM: PTRTBL entry %d - rd_ptr is not equal to wr_ptr. Values are 0x%x and 0x%x\n",
-				 i, rd_ptr, wr_ptr);
-			ecore_self_test_log(p_path->p_dev, p_rec->severity,
-					    p_message);
-		}
-
-		/* calculate read and write banks */
-		rd_bank = ((p_rec->pred_args.val1 & 0x30) >> 4);
-		wr_bank = (p_rec->pred_args.val1 & 0x03);
-
-		/* perform bank test */
-		if (rd_bank != wr_bank) {
-			SNPRINTF(p_message, MAX_FAIL_MSG,
-				 "QM: PTRTBL entry %d - rd_bank is not equal to wr_bank. Values are 0x%x 0x%x\n",
-				 i, rd_bank, wr_bank);
-			ecore_self_test_log(p_path->p_dev, p_rec->severity,
-					    p_message);
-		}
-	}
-}
-
-/* specific test for cfc info ram and cid cam*/
-static void ecore_idle_chk7(struct ecore_path	*p_path,
-			     struct st_record	*p_rec,
-			     char		*p_message,
-			     int 		ptt)
-{
-	int i;
-	u32 offset, tmp = 0;
-
-	offset = ecore_bar_get_ext_addr(p_path, ptt);
-
-	/* iterate through lcids */
-	for (i = 0; i < p_rec->loop; i++) {
-		/* make sure cam entry is valid (bit 0) */
-		ecore_idle_reg_rd(p_path, &tmp, p_rec->reg2 + i *4,
-				  offset, ptt);
-		if ((tmp & 0x1) != 0x1)
-			continue;
-
-		/* get connection type (multiple reads due to widebus) */
-		ecore_idle_reg_rd(p_path, &tmp, p_rec->reg1 + i * p_rec->incr,
-				  offset, ptt);
-		ecore_idle_reg_rd(p_path, &tmp,
-				  p_rec->reg1 + i * p_rec->incr + 4,
-				  offset, ptt);				  
-		ecore_idle_reg_rd(p_path, &p_rec->pred_args.val1,
-				  p_rec->reg1 + i * p_rec->incr + 8,
-				  offset, ptt);				  
-		ecore_idle_reg_rd(p_path, &tmp,
-				  p_rec->reg1 + i * p_rec->incr + 12,
-				  offset, ptt);
-
-		/* obtain connection type */
-		p_rec->pred_args.val1 &= 0x1E000000;
-		p_rec->pred_args.val1 >>= 25;
-
-		/* get activity counter value */
-		ecore_idle_reg_rd(p_path, &p_rec->pred_args.val2,
-				  p_rec->reg3 + i * 4, offset, ptt);
-
-		/* validate ac value is legal for con_type at idle state */
-		if (p_rec->predicate(&p_rec->pred_args)) {
-			SNPRINTF(p_message, MAX_FAIL_MSG, "%s. Values are "
-				"0x%x 0x%x\n", p_rec->failMsg,
-				p_rec->pred_args.val1, p_rec->pred_args.val2);
-			ecore_self_test_log(p_path->p_dev, p_rec->severity,
-					    p_message);
-		}
-	}
-}
-
-/* struct holding the database of self test checks (registers and predicates) */
-/* lines start from 2 since line 1 is heading in csv*/
-end
-
-perl ${IDLE_CHECK_LOCATION}/idle_chk_db.pl ${IDLE_CHECK_LOCATION}/idle_check.csv >> ecore_self_test.c
-
-cat << end >>  ecore_self_test.c
-
-/* self test procedure
- * scan auto-generated database
- * for each line:
- * 1.	compare chip mask
- * 2.	determine type (according to maro number)
- * 3.	read registers
- * 4.	call predicate
- * 5.	collate results and statistics
- */
-int ecore_idle_chk(struct ecore_path *p_path, bool b_print)
-{
-	u16 i;				/* loop counter */
-	u16 st_ind;			/* self test database access index */
-	struct st_record rec;		/* current record variable */
-	char message[MAX_FAIL_MSG];	/* message to log */
-	int ptt;
-	u32 offset, tmp = 0;
-
-	/*init stats*/
-	idle_chk_errors = 0;
-	idle_chk_warnings = 0;
-
-	ptt = ecore_ptt_acquire(p_path, 0xdeadbadd); /* FIXME - owner? */
-	offset = ecore_bar_get_ext_addr(p_path, ptt);
-
-	/*database main loop*/
-	for (st_ind = 0; st_ind < ST_DB_LINES; st_ind++) {
-		rec = st_database[st_ind];
-
-		/* identify macro */
-		switch (rec.macro) {
-		case 1:
-			/* read single reg and call predicate */
-			ecore_idle_reg_rd(p_path, &rec.pred_args.val1,
-					 rec.reg1, offset, ptt);
-			DP_VERBOSE(p_path->p_dev, ECORE_MSG_HW,
-				   "mac1 add %x\n", rec.reg1);
-			if (rec.predicate(&rec.pred_args)) {
-				SNPRINTF(message, sizeof(message),
-					"%s.Value is 0x%x\n", rec.failMsg,
-					rec.pred_args.val1);
-				ecore_self_test_log(p_path->p_dev, rec.severity,
-						    message);
-			}
-			break;
-		case 2:
-			/* read repeatedly starting from reg1 and call
-			 * predicate after each read
-			 */
-			for (i = 0; i < rec.loop; i++) {
-				ecore_idle_reg_rd(p_path, &rec.pred_args.val1,
-						  rec.reg1 + i * rec.incr,
-						  offset, ptt);
-				DP_VERBOSE(p_path->p_dev, ECORE_MSG_HW,
-					   "mac2 add %x\n", rec.reg1);
-				if (rec.predicate(&rec.pred_args)) {
-					SNPRINTF(message, sizeof(message),
-						"%s. Value is 0x%x in loop %d\n",
-						rec.failMsg,
-						rec.pred_args.val1, i);
-					ecore_self_test_log(p_path->p_dev,
-							    rec.severity,
-							    message);
-				}
-			}
-			break;
-		case 3:
-			/* read two regs and call predicate */
-			ecore_idle_reg_rd(p_path, &rec.pred_args.val1,
-						  rec.reg1, offset, ptt);
-			ecore_idle_reg_rd(p_path, &rec.pred_args.val2,
-						  rec.reg2, offset, ptt);
-			DP_VERBOSE(p_path->p_dev, ECORE_MSG_HW,
-				   "mac3 add1 %x add2 %x\n",
-				   rec.reg1, rec.reg2);
-			if (rec.predicate(&rec.pred_args)) {
-				SNPRINTF(message, sizeof(message),
-					 "%s. Values are 0x%x 0x%x\n",
-					 rec.failMsg, rec.pred_args.val1,
-					 rec.pred_args.val2);
-				ecore_self_test_log(p_path->p_dev, rec.severity,
-						    message);
-			}
-			break;
-		case 4:
-			/*unused to-date*/
-			for (i = 0; i < rec.loop; i++) {
-				ecore_idle_reg_rd(p_path, &rec.pred_args.val1,
-						  rec.reg1 + i * rec.incr,
-						  offset, ptt);
-				ecore_idle_reg_rd(p_path, &rec.pred_args.val2,
-						  rec.reg2 + i * rec.incr,
-						  offset, ptt);
-				rec.pred_args.val2 >>= 1;
-				if (rec.predicate(&rec.pred_args)) {
-					SNPRINTF(message, sizeof(message),
-						 "%s. Values are 0x%x 0x%x in loop %d\n", rec.failMsg,
-						 rec.pred_args.val1,
-						 rec.pred_args.val2, i);
-					ecore_self_test_log(p_path->p_dev,
-							    rec.severity,
-							    message);
-				}
-			}
-			break;
-		case 5:
-			/* compare two regs, pending
-			 * the value of a condition reg
-			 */
-			ecore_idle_reg_rd(p_path, &rec.pred_args.val1,
-					  rec.reg1, offset, ptt);
-			ecore_idle_reg_rd(p_path, &rec.pred_args.val2,
-					  rec.reg2, offset, ptt);
-			DP_VERBOSE(p_path->p_dev, ECORE_MSG_HW,
-				   "mac3 add1 %x add2 %x add3 %x\n",
-				   rec.reg1, rec.reg2, rec.reg3);
-			ecore_idle_reg_rd(p_path, &tmp,
-					  rec.reg3, offset, ptt);
-			if (!tmp && rec.predicate(&rec.pred_args)) {
-				SNPRINTF(message, sizeof(message),
-					 "%s. Values are 0x%x 0x%x\n",
-					 rec.failMsg, rec.pred_args.val1,
-					 rec.pred_args.val2);
-				ecore_self_test_log(p_path->p_dev,
-						    rec.severity,
-						    message);
-			}
-			break;
-		case 6:
-			/* compare read and write pointers
-			 * and read and write banks in QM
-			 */
-			ecore_idle_chk6(p_path, &rec, message, ptt);
-			break;
-		case 7:
-			/*compare cfc info cam with cid cam*/
-			ecore_idle_chk7(p_path, &rec, message, ptt);
-			break;
-		default:
-			DP_VERBOSE(p_path->p_dev, ECORE_MSG_HW,
-				   "unknown macro in self test data base. macro %d line %d",
-				   rec.macro, st_ind);
-		}
-	}
-
-	ecore_ptt_release(p_path, ptt);
-
-	if (!b_print)
-		return idle_chk_errors;
-
-	/* return value accorindg to statistics */
-	if (idle_chk_errors == 0) {
-		DP_VERBOSE(p_path->p_dev, ECORE_MSG_HW,
-			   "completed successfully (logged %d warnings)\n",
-			   idle_chk_warnings);
-	} else {
-		DP_NOTICE(p_path->p_dev,
-			  "failed (with %d errors, %d warnings)\n",
-			  idle_chk_errors, idle_chk_warnings);
-	}
-
-	return idle_chk_errors;
-}
-
-end
-
-echo ecore_self_test.c is ready
-
diff --git a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/dos2unix.sh b/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/dos2unix.sh
deleted file mode 100644
index 85c22bd995..0000000000
--- a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/dos2unix.sh
+++ /dev/null
@@ -1,9 +0,0 @@
-err_file='/tmp/dos2unix.err'
-
-for file in $*
-do
-	dos2unix -n $file $file.new 2> $err_file
-	grep -v 'dos2unix: converting file' $err_file
-	rm -f $err_file
-	mv -f $file.new $file
-done
diff --git a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/e2l.pl b/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/e2l.pl
deleted file mode 100644
index 852f3d28ce..0000000000
--- a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/e2l.pl
+++ /dev/null
@@ -1,771 +0,0 @@
-#!/usr/bin/perl -w
-use File::Basename;
-
-##############################################################################
-#                            Data Base                                       #
-##############################################################################
-
-# When translating OSAL code into linux code, sometimes linux headers are need to define data structures or functionality.
-# E.g., when using osal_list_t, on linux we'll need to add "#include "linux/list.h"
-our %includes_global_table = (
-	mutex => "linux/mutex.h",
-	list => "linux/list.h",
-	semaphore => "linux/semaphore.h",
-	delay => "linux/delay.h",
-	sleep => "linux/delay.h",
-	alloc => "linux/slab.h",
-	DIV_ROUND_UP => "linux/kernel.h",
-	roundup => "linux/kernel.h",
-	ARRAY_SIZE => "linux/kernel.h",
-	memset => "linux/string.h",
-	REG_WR => "linux/io.h",
-	ENOMEM => "linux/errno.h",
-	DP_MODULE => "linux/compiler.h",
-	DP_LEVEL => "linux/kernel.h",
-	list_first_entry => "linux/kernel.h",
-	LINUX_VERSION_CODE => "linux/version.h",
-	NULL => "linux/kernel.h",
-	spinlock => "linux/spinlock.h",
-	spin_lock => "linux/spinlock.h",
-	coherent => "linux/dma-mapping.h",
-	cpu_to_le32 => "asm/byteorder.h",
-	le32_to_cpu => "asm/byteorder.h",
-	cpu_to_le16 => "asm/byteorder.h",
-	le16_to_cpu => "asm/byteorder.h",
-	cpu_to_be32 => "asm/byteorder.h",
-	be32_to_cpu => "asm/byteorder.h",
-	memcpy => "linux/string.h",
-	mmiowb => "linux/io.h",
-	pdev => "linux/pci.h",
-	_bit => "linux/bitops.h",
-	is_valid_ether_addr => "linux/etherdevice.h",
-	PCI_EXT_CAP_ID_SRIOV => "linux/pci_regs.h",
-	roundup_pow_of_two => "linux/log2.h",
-	ilog2 => "linux/log2.h",
-	tasklet => "linux/interrupt.h",
-	BUILD_BUG_ON => "linux/bug.h",
-	EXPORT_SYMBOL => "linux/module.h",
-	delayed_work => "linux/workqueue.h",
-	z_stream_s => "linux/zlib.h",
-	"struct firmware" => "linux/firmware.h",
-	vzalloc => "linux/vmalloc.h",
-	num_present_cpus => "linux/cpumask.h",
-	vlan_ethhdr => "linux/if_vlan.h",
-	ethhdr => "linux/if_ether.h",
-	iphdr => "linux/ip.h",
-	ipv6hdr => "linux/ipv6.h",
-	tcphdr => "linux/tcp.h",
-	WARN => "linux/bug.h",
-	crc32 => "linux/crc32.h",
-	kstrtoul => "linux/kernel.h",
-	DECLARE_CRC8_TABLE => "linux/crc8.h",
-	crc8_populate_msb => "linux/crc8.h", # 'crc8' is not explicitly listed since this string appears also in ecore_dbg_values.h
-	L1_CACHE_BYTES => "asm/cache.h",
-);
-
-# Like previous, only here global headers are added under some ifdef, mostly due to compatibility
-our %includes_global_dependent_table = (
-	DECLARE_HASHTABLE => { "HEADER" => "linux/hashtable.h", "LIMIT" => "defined(QED_UPSTREAM)" },
-	"linux/fs.h" => { "HEADER" => "linux/fs.h", "LIMIT" => "defined(CONFIG_DEBUG_FS)" },
-	"linux/debugfs.h" => { "HEADER" => "linux/debugfs.h", "LIMIT" => "defined(CONFIG_DEBUG_FS)" },
-
-);
-
-# Due [mostly] to relocation of code, it's possible that new local inclusion will be needed.
-# E.g., eth_stats are moved into a qed interface file, so that file needs to be included whenever the struct is accessed.
-our %includes_local_table = (
-	DECLARE_HASHTABLE => "qed_compat.h",
-	eth_stats => "qed_if.h",
-	fcoe_stats => "qed_fcoe_if.h",
-	iscsi_stats => "qed_iscsi_if.h",
-	qed_ll2_stats => "qed_ll2_if.h",
-	rdma_start_in_params => "qed_roce_if.h",
-	qed_copy_preconfig_to_bus => "qed_debugfs.h",
-	QED_RSS => "qed_eth_if.h",
-);
-
-# Same relation to the local_table as the global_dependent had to the global_table
-our %includes_local_dependent_table = (
-	"qed_init_values_zipped.h" => { "HEADER" => "qed_init_values_zipped.h", "LIMIT" => "defined(CONFIG_QED_ZIPPED_FW) && !defined(CONFIG_QED_BINARY_FW)" },
-	"qed_init_values.h" => { "HEADER" => "qed_init_values.h", "LIMIT" => "!defined(CONFIG_QED_ZIPPED_FW) && !defined(CONFIG_QED_BINARY_FW)" },
-);
-
-# Until we'll have a working binary file that replaces generated arrays, we need to prevent the inclusion of some of them,
-# dependent on their actual usage.
-our %prevent_table = (
-	dump_mem => {"prevent_symbol" => "DUMP_MEM_ARR", "found" => 0 },
-	pxp_global_win => {"prevent_symbol" => "PXP_GLOBAL_WIN", "found" => 0 },
-);
-
-# Hashes to mark whether a given symbol was found or not
-our %used_ig = ();
-our @il_order = ( "common_hsi.h", "storage_common.h", "tcp_common.h", "fcoe_common.h", "iscsi_common.h" );
-our %used_il = ();
-our %used_igt = ();
-our %used_igdt = ();
-our %used_ilt = ();
-our %used_ildt = ();
-
-# These should remain as "xxx_t" and not transformed into "struct xxx"
-our $allowed_t = qr {(?<!dma_addr)(?<!size)(?<!spinlock)(?<!qed_int_comp_cb)(?<!iscsi_event_cb)(?<!affiliated_event)(?<!unaffiliated_event)(?<!pci_power)(?<!skb_frag)};
-
-# A parameter is anything between the "," - it can contain "struct", sizeof(),
-# ->, . and many other things - in short, anything that is not a comma.
-our $parm = qr{\s*([^,\s][^,]*[^,\s]:?)\s*};
-
-our $comment_start = qr{\/\*};
-our $comment_end = qr{\*\/};
-our $c_line_end = qr{\;|\{|\}|$comment_end};
-
-our $pp_line = qr{\s*\#\s*};
-# when set, current scope is inside a pre-processor segment
-our $pp_segment = 0;
-# when set, we're inside the context of a multi-lined comment
-our $inside_cmt = 0;
-
-##############################################################################
-#                               Subroutines                                  #
-##############################################################################
-
-sub correct_include {
-	my ($inc_file, $name_to_use, $file_arr) = @_;
-
-	for my $filename (@$file_arr) {
-		if (${$inc_file} eq $filename) {
-			${$inc_file} = $name_to_use;
-			return 1;
-		}
-	}
-
-	return 0;
-}
-
-# Given a local include header, make sure we're not including a united file.
-# If so, include the combined file instead. Also make sure we're not including
-# ourselves.
-sub translate_include_private {
-	my @file_add_qed = ( "reg_addr.h" );
-	my @file_common = ( "common_hsi.h", "qed_utils.h" );
-	my @file_cxt = ( "qed_cxt.h", "qed_cxt_api.h" );
-	my @file_fcoe = ( "qed_fcoe.h", "qed_fcoe_api.h" );
-	my @file_iscsi = ( "qed_iscsi.h", "qed_iscsi_api.h" );
-	my @file_roce = ( "qed_roce.h", "qed_roce_api.h" );
-	my @file_l2 = ( "qed_l2.h", "qed_l2_api.h" );
-	my @file_ll2 = ( "qed_ll2.h", "qed_ll2_api.h" );
-	my @file_mcp = ( "qed_mcp.h", "qed_mcp_api.h" );
-	my @file_dcbx = ( "qed_dcbx.h", "qed_dcbx_api.h" );
-	my @file_int = ( "qed_int.h", "qed_int_api.h", "qed_hw_defs.h" );
-	my @file_sp = ( "qed_sp_commands.h", "qed_sp_api.h", "qed_spq.h" );
-	my @file_sriov = ( "qed_sriov.h", "qed_iov_api.h" );
-	my @file_qed_if = ( "qed_proto_if.h" );
-	my @file_vf = ( "qed_vf.h", "qed_vf_api.h" , "qed_vfpf_if.h" );
-	my @file_ptp = ( "qed_ptp_api.h" );
-	my @file_selftest = ( "qed_selftest_api.h" );
-	my @file_hsi = ( "pcics_reg_driver.h", "qed_attn_values.h" , "qed_dbg_fw_funcs.h" , "qed_dbg_values.h" , "qed_fw_funcs_defs.h" , "qed_gtt_reg_addr.h" , "qed_gtt_values.h" , "qed_init_defs.h" , "qed_init_fw_funcs.h", "qed_iro.h" , "qed_iro_values.h", "qed_rt_defs.h" , "qed_hsi_common.h" , "qed_hsi_eth.h" , "qed_hsi_toe.h" , "qed_hsi_roce.h" , "qed_hsi_iwarp.h", "qed_hsi_rdma.h" , "qed_hsi_fcoe.h" , "qed_hsi_iscsi.h" , "mcp_public.h" , "nvm_cfg.h", "mfw_hsi.h" , "spad_layout.h", "nvm_map.h" , "qed_hsi_debug_tools.h", "qed_hsi_init_func.h", "qed_hsi_init_tool.h");
-
-	# Skip certain inclusions
-	if ($_[0] =~ m/bcm_osal.h|qed_status.h/) {
-		return 1;
-	}
-
-	if (correct_include(\$_[0], "qed_$_[0]", \@file_add_qed)) {}
-	elsif (correct_include(\$_[0], "qed_hsi.h", \@file_hsi)) {}
-	elsif (correct_include(\$_[0], "common_hsi.h", \@file_common)) {}
-	elsif (correct_include(\$_[0], "qed_cxt.h", \@file_cxt)) {}
-	elsif (correct_include(\$_[0], "qed_fcoe.h", \@file_fcoe)) {}
-	elsif (correct_include(\$_[0], "qed_iscsi.h", \@file_iscsi)) {}
-	elsif (correct_include(\$_[0], "qed_roce.h", \@file_roce)) {}
-	elsif (correct_include(\$_[0], "qed_l2.h", \@file_l2)) {}
-	elsif (correct_include(\$_[0], "qed_ll2.h", \@file_ll2)) {}
-	elsif (correct_include(\$_[0], "qed_mcp.h", \@file_mcp)) {}
-	elsif (correct_include(\$_[0], "qed_dcbx.h", \@file_dcbx)) {}
-	elsif (correct_include(\$_[0], "qed_int.h", \@file_int)) {}
-	elsif (correct_include(\$_[0], "qed_sp.h", \@file_sp)) {}
-	elsif (correct_include(\$_[0], "qed_sriov.h", \@file_sriov)) {}
-	elsif (correct_include(\$_[0], "qed_vf.h", \@file_vf)) {}
-	elsif (correct_include(\$_[0], "qed_if.h", \@file_qed_if)) {}
-	elsif (correct_include(\$_[0], "qed_ptp_api.h", \@file_ptp)) {}
-	elsif (correct_include(\$_[0], "qed_selftest.h", \@file_selftest)) {}
-
-
-	# Skip this inclusion if it's same as current filename
-	if ($_[0] eq $target_filename) {
-		return 1;
-	}
-
-	return 0;
-}
-
-sub create_include_list {
-	if ($_[0] =~ m/${pp_line}include/) {
-		if ($_[0] =~ m/${pp_line}include\s*\"(.+)\"/) {
-			#Translate private includes
-			my $inc_file = $1;
-			if (translate_include_private($inc_file) == 0) {
-				if (exists $includes_local_dependent_table{$inc_file}) {
-					$used_ildt{$inc_file} = 1;
-				} else {
-					$used_il{$inc_file} = 1;
-				}
-			}
-		} elsif ($_[0] =~ /${pp_line}include\s*<(.+)>/) {
-			my $inc_file = $1;
-			if (exists $includes_global_dependent_table{$inc_file}) {
-				$used_igdt{$inc_file} = 1;
-			} else {
-				$used_ig{$inc_file} = 1;
-			}
-		}
-		return 1;
-	} else {
-		# There isn't an explicit #include; Instead, need to determine whether
-		# there's need to include something as result of line's content.
-		foreach $inc (keys %includes_global_table) {
-			if ($_[0] =~ m/$inc/) {
-				$used_igt{$includes_global_table{$inc}} = 1;
-			}
-		}
-		foreach $inc (keys %includes_global_dependent_table) {
-			if ($_[0] =~ m/$inc/) {
-				$used_igdt{$inc} = 1;
-			}
-		}
-		foreach $inc (keys %includes_local_table) {
-			if ($_[0] =~ m/$inc/) {
-				my $include_name = $includes_local_table{$inc};
-				if (translate_include_private($include_name) == 0) {
-					$used_ilt{$include_name} = 1;
-				}
-			}
-		}
-		foreach $inc (keys %includes_local_dependent_table) {
-			if ($_[0] =~ m/$inc/) {
-				my $include_name = $includes_local_dependent_table{$inc}{"HEADER"};
-				if (translate_include_private($include_name) == 0) {
-					$used_ildt{$inc} = 1;
-				}
-			}
-		}
-		foreach $inc (keys %prevent_table) {
-			if ($_[0] =~ m/$inc/) {
-				$prevent_table{$inc}{"found"} = 1;
-			}
-		}
-	}
-
-	return 0;
-}
-
-# Translation function - each line of the code will go through this function
-# after consolidating all functions and macros to a single line (the 80 columns
-# will be enforced later)
-sub translate_line {
-	# The for loop is just there to avoid the "@_ =~" prefix in each line:
-	for (@_) {
-		s/OSAL_DIV_S64/div64_s64/go;
-		s/\bROUNDUP\b/roundup/go;
-		s/OSAL_UDELAY/udelay/go;
-		s/OSAL_NUM_ACTIVE_CPU/num_present_cpus/go;
-		s/OSAL_ROUNDUP_POW_OF_TWO/roundup_pow_of_two/g;
-		s/OSAL_LOG2/ilog2/g;
-
-		s/OSAL_SET_BIT/__set_bit/go;
-		s/OSAL_CLEAR_BIT/clear_bit/go;
-		s/OSAL_TEST_BIT/test_bit/go;
-		s/OSAL_TEST_AND_CLEAR_BIT/test_and_clear_bit/go;
-		s/OSAL_FIND_FIRST_ZERO_BIT/find_first_zero_bit/go;
-		s/OSAL_FIND_FIRST_BIT/find_first_bit/go;
-		s/OSAL_BITMAP_WEIGHT/bitmap_weight/go;
-		s/OSAL_TEST_AND_FLIP_BIT/test_and_change_bit/go;
-		s/OFFSETOF/offsetof/go;
-		s/\(sizeof\(unsigned long\) \* 8 \/\* BITS_PER_LONG \*\/\)/BITS_PER_LONG/go;
-
-		s/OSAL_MEMSET/memset/g;
-		s/OSAL_ARRAY_SIZE/ARRAY_SIZE/g;
-		s/OSAL_STRCPY/strcpy/g;
-		s/OSAL_STRNCPY/strncpy/g;
-		s/OSAL_STRLEN/strlen/g;
-		s/OSAL_STRCMP/strcmp/g;
-		s/OSAL_SPRINTF/sprintf/g;
-		s/OSAL_SNPRINTF/snprintf/g;
-		s/OSAL_STRTOUL/kstrtoul/g;
-		s/OSAL_INLINE/inline/g;
-		s/OSAL_NULL/NULL/g;
-		s/OSAL_MIN_T/min_t/g;
-		s/OSAL_MAX_T/max_t/g;
-		s/OSAL_REG_ADDR/REG_ADDR/g;
-		s/OSAL_PAGE_SIZE/PAGE_SIZE/g;
-		s/OSAL_CACHE_LINE_SIZE/L1_CACHE_BYTES/g;
-		s/OSAL_BUILD_BUG_ON/BUILD_BUG_ON/g;
-		s/OSAL_IOMEM/__iomem/g;
-		s/OSAL_UNLIKELY/unlikely/g;
-		s/osal_size_t/size_t/g;
-		s/osal_uintptr_t/uintptr_t/g;
-		s/U64_HI/upper_32_bits/g;
-		s/U64_LO/lower_32_bits/g;
-
-		# OSAL_MSLEEP --> msleep for big values
-		if ($_ =~ /OSAL_MSLEEP\(([0-9]*)\)/) {
-			$value = $1;
-			if ($value  < 20) {
-				$down = $value * 1000;
-				$up = $value * 2000;
-				s/OSAL_MSLEEP\(([0-9]*)\)/usleep_range($down, $up)/go;
-			} else {
-				s/OSAL_MSLEEP/msleep/go;
-			}
-		}
-		s/OSAL_MSLEEP/msleep/go;
-
-		s/OSAL_NVM_IS_ACCESS_ENABLED\(p_hwfn\)/1/go;
-
-		#DPC related
-		s/OSAL_DPC_INIT\($parm,$parm\)/tasklet_init($1, ecore_int_sp_dpc, (long unsigned int)$2)/go;
-		s/osal_dpc_t/struct tasklet_struct */go;
-		s/OSAL_DPC_ALLOC\($parm\)/kmalloc(sizeof(struct tasklet_struct), GFP_KERNEL)/go;
-		s/OSAL_POLL_MODE_DPC\($parm\)//go;
-		s/OSAL_DPC_SYNC\($parm\)/qed_slowpath_irq_sync($1)/go;
-		s/osal_int_ptr_t/long unsigned int/go;
-
-		s/OSAL_ALLOC\($parm,$parm,$parm\)/kmalloc($3, $2)/g;
-		s/OSAL_ZALLOC\($parm,$parm,$parm\)/kzalloc($3, $2)/g;
-		s/OSAL_CALLOC\($parm,$parm,$parm,$parm\)/kcalloc($3, $4, $2)/g;
-		s/OSAL_VZALLOC\($parm,$parm\)/vzalloc($2)/g;
-		s/OSAL_FREE\($parm,$parm\)/kfree($2)/g;
-		s/OSAL_VFREE\($parm,$parm\)/vfree($2)/g;
-		s/OSAL_MEM_ZERO\($parm,$parm\)/memset($1, 0, $2)/g;
-		s/OSAL_MEMCPY/memcpy/g;
-		s/OSAL_MEMCMP/memcmp/g;
-
-		s/OSAL_DMA_ALLOC_COHERENT\($parm,$parm,$parm\)/dma_alloc_coherent(\&$1->pdev->dev, $3, $2, GFP_KERNEL)/g;
-		s/OSAL_DMA_FREE_COHERENT\($parm,$parm,$parm,$parm\)/dma_free_coherent(\&$1->pdev->dev, $4, $2, $3)/g;
-		s/OSAL_MMIOWB\($parm\)/mmiowb()/go;
-		s/OSAL_BARRIER\($parm\)/barrier()/go;
-		s/OSAL_SMP_WMB\($parm\)/smp_wmb()/go;
-		s/OSAL_SMP_RMB\($parm\)/smp_rmb()/go;
-		s/OSAL_RMB\($parm\)/rmb()/go;
-		s/OSAL_WMB\($parm\)/wmb()/go;
-
-		# There are some OSALs that simply need to be removed
-		s/OSAL_SPIN_LOCK_ALLOC\([\s\S]*\)//go;
-		s/OSAL_SPIN_LOCK_DEALLOC\($parm\)//go;
-		s/OSAL_MUTEX_ALLOC\([\s\S]*\)//go;
-		s/OSAL_MUTEX_DEALLOC\($parm\)//go;
-		s/OSAL_DMA_SYNC\([\s\S]*\)//go;
-		s/OSAL_HW_INFO_CHANGE\([\s\S]*\)\s*;//go;
-
-		s/osal_mutex/mutex/go;
-		s/OSAL_MUTEX_INIT/mutex_init/go;
-		s/OSAL_MUTEX_ACQUIRE\($parm\)/mutex_lock($1)/g;
-		s/OSAL_MUTEX_RELEASE\($parm\)/mutex_unlock($1)/g;
-		s/osal_spinlock_t/spinlock_t/go;
-		s/OSAL_SPIN_LOCK_INIT/spin_lock_init/go;
-		s/OSAL_SPIN_LOCK_IRQSAVE/spin_lock_irqsave/go;
-		s/OSAL_SPIN_UNLOCK_IRQSAVE/spin_unlock_irqrestore/go;
-		s/OSAL_SPIN_LOCK/spin_lock_bh/go;
-		s/OSAL_SPIN_UNLOCK/spin_unlock_bh/go;
-
-		s/OSAL_LIST_INIT/INIT_LIST_HEAD/go;
-		s/OSAL_LIST_PUSH_TAIL\($parm,$parm\)/list_add_tail($1, $2)/g;
-		s/OSAL_LIST_PUSH_HEAD\($parm,$parm\)/list_add($1, $2)/g;
-		s/OSAL_LIST_REMOVE_ENTRY\($parm,$parm\)/list_del($1)/g;
-		s/OSAL_LIST_FOR_EACH_ENTRY\($parm,$parm,$parm,$parm\)/list_for_each_entry($1, $2, $3)/g;
-		s/OSAL_LIST_FOR_EACH_ENTRY_SAFE\($parm,$parm,$parm,$parm,$parm\)/list_for_each_entry_safe($1, $2, $3, $4)/g;
-		s/OSAL_LIST_FIRST_ENTRY\($parm,$parm,$parm\)/list_first_entry($1, $2, $3)/g;
-		s/OSAL_LIST_IS_EMPTY\($parm\)/list_empty($1)/g;
-		s/osal_list_entry/list_head/go;
-		s/osal_list/list_head/go;
-
-		# OSAL_LIST_INSERT_ENTRY_BEFORE --> list_add_tail
-		s/OSAL_LIST_INSERT_ENTRY_BEFORE\($parm,$parm,$parm\)/list_add_tail($1, $2)/g;
-
-		# OSAL_LIST_INSERT_ENTRY_AFTER --> list_add
-		s/OSAL_LIST_INSERT_ENTRY_AFTER\($parm,$parm,$parm\)/list_add($1, $2)/g;
-
-		# OSAL_LIST_SPLICE_INIT --> list_splice_init 
-		s/OSAL_LIST_SPLICE_INIT\($parm,$parm\)/list_splice_init($1, $2)/g;
-
-		# OSAL_LIST_SPLICE_TAIL_INIT --> list_splice_tail_init 
-		s/OSAL_LIST_SPLICE_TAIL_INIT\($parm,$parm\)/list_splice_tail_init($1, $2)/g;
-
-		# SRIOV related
-		s/ECORE_IOV/QED_IOV/go;
-		s/OSAL_VF_SEND_MSG2PF\(.*\)/0/g;
-		s/return OSAL_PF_VF_MSG\($parm,$parm\)/qed_schedule_iov($1, QED_IOV_WQ_MSG_FLAG);\nreturn 0/g;
-		s/OSAL_PF_VF_MALICIOUS\($parm,$parm\);//g;
-		s/OSAL_IOV_CHK_UCAST/qed_iov_chk_ucast/g;
-		s/OSAL_VF_UPDATE_ACQUIRE_RESC_RESP\(.*\)/0/g;
-		s/OSAL_VF_FILL_ACQUIRE_RESC_REQ\(${parm},${parm},${parm}/qed_vf_fill_driver_data\($1, $3/g;
-		s/OSAL_VF_CQE_COMPLETION\(.*\)/0/g;
-		s/OSAL_IOV_GET_OS_TYPE\(\)/VFPF_ACQUIRE_OS_LINUX/g;
-		s/OSAL_VF_FLR_UPDATE\($parm\)/qed_schedule_iov($1, QED_IOV_WQ_FLR_FLAG)/g;
-		s/OSAL_BEFORE_PF_START/qed_copy_preconfig_to_bus/go;
-		s/OSAL_AFTER_PF_STOP/qed_copy_bus_to_postconfig/go;
-		s/OSAL_IOV_POST_START_VPORT\([\s\S]*\);//go;
-		s/OSAL_IOV_PRE_START_VPORT/qed_iov_pre_start_vport/go;
-		s/OSAL_IOV_VF_CLEANUP/qed_iov_clean_vf/go;
-		s/OSAL_IOV_VF_VPORT_UPDATE/qed_iov_pre_update_vport/go;
-		s/OSAL_IOV_VF_VPORT_STOP\($parm,$parm\);//go;
-		s/OSAL_PF_VALIDATE_MODIFY_TUNN_CONFIG/qed_pf_validate_modify_tunn_config/go;
-		s/OSAL_IOV_VF_MSG_TYPE\([\s\S]*\);//go;
-		s/OSAL_IOV_PF_RESP_TYPE\([\s\S]*\);//go;
-
-		# Zipped firmwre data related
-		s/OSAL_UNZIP_DATA/qed_unzip_data/g;
-
-		# Link related
-		s/OSAL_LINK_UPDATE/qed_link_update/g;
-
-		# DCBX Async Event Notification
-		s/OSAL_DCBX_AEN/qed_dcbx_aen/g;
-
-		# Recovery related
-		s/OSAL_SCHEDULE_RECOVERY_HANDLER/qed_schedule_recovery_handler/g;
-		s/OSAL_HW_ERROR_OCCURRED/qed_hw_error_occurred/g;
-
-		# Statistics related
-		s/OSAL_GET_PROTOCOL_STATS/qed_get_protocol_stats/g;
-
-		# Prepare ISR for the slowpath interrupt
-		s/OSAL_SLOWPATH_IRQ_REQ/qed_slowpath_irq_req/g;
-
-		# ROCE related
-		s/OSAL_GET_RDMA_SB_ID\($parm,$parm\)/qed_rdma_get_sb_id\($1, $2)/g;
-
-		# MFW TLV related
-		s/OSAL_MFW_TLV_REQ/qed_mfw_tlv_req/g;
-
-		# MFW TLV related
-		s/OSAL_MFW_FILL_TLV_DATA/qed_mfw_fill_tlv_data/g;
-
-		# Some black voodoo magic for DP_NOTICE, to allow ecore sources to use 'is_assert'
-		# While qed sources don't use that parameter [but those sources might still be processed here.
-		s/DP_NOTICE\(${parm},${parm},\s*\"${parm}/DP_NOTICE\($1, \"$3/g;
-		s/DP_NOTICE\(p_dev, is_assert, fmt/DP_NOTICE\(cdev, fmt/g;
-
-		s/\(1 << ${parm}\)/BIT\($1\)/g;
-
-		s/OSAL_ASSERT.*;//go;
-		s/OSAL_WARN/WARN/go;
-		s/#define CHECK_ARR_SIZE.*//go;
-		s/CHECK_ARR_SIZE.*;//go;
-
-		# This is hard-coded, but it's unlikely the DP_* macros would change in ecore.h.
-		# If they do - we'll fix this as well.
-		s/PRINT_ERR\(${parm}, /pr_err\(/go;
-		s/PRINT\(${parm}, /pr_notice\(/go;
-		s/\(p_dev\)->name/DP_NAME\(cdev\)/go;
-		s/ECORE_MSG_DRV/NETIF_MSG_DRV/go;
-		s/ECORE_MSG_PROBE/NETIF_MSG_PROBE/go;
-		s/ECORE_MSG_LINK/NETIF_MSG_LINK/go;
-		s/ECORE_MSG_TIMER/NETIF_MSG_TIMER/go;
-		s/ECORE_MSG_IFDOWN/NETIF_MSG_IFDOWN/go;
-		s/ECORE_MSG_IFUP/NETIF_MSG_IFUP/go;
-		s/ECORE_MSG_RX_ERR/NETIF_MSG_RX_ERR/go;
-		s/ECORE_MSG_TX_ERR/NETIF_MSG_TX_ERR/go;
-		s/ECORE_MSG_TX_QUEUED/NETIF_MSG_TX_QUEUED/go;
-		s/ECORE_MSG_INTR/NETIF_MSG_INTR/go;
-		s/ECORE_MSG_TX_DONE/NETIF_MSG_TX_DONE/go;
-		s/ECORE_MSG_RX_STATUS/NETIF_MSG_RX_STATUS/go;
-		s/ECORE_MSG_PKTDATA/NETIF_MSG_PKTDATA/go;
-		s/ECORE_MSG_HW/NETIF_MSG_HW/go;
-		s/ECORE_MSG_WOL/NETIF_MSG_WOL/go;
-
-		# Change the components ifdefs
-		s/CONFIG_ECORE_ROCE/CONFIG_QEDR/go;
-		s/CONFIG_ECORE_IWARP/CONFIG_IWARP/go;
-		s/CONFIG_ECORE_FCOE/CONFIG_QEDF/go;
-		s/CONFIG_ECORE_ISCSI/CONFIG_QEDI/go;
-		s/CONFIG_ECORE_L2/CONFIG_QEDE/go;
-
-		#Endianity
-		s/OSAL_BE32_TO_CPU/be32_to_cpu/g;
-		s/OSAL_CPU_TO_BE32/cpu_to_be32/g;
-		s/OSAL_CPU_TO_BE64/cpu_to_be64/g;
-		s/OSAL_BE32/__be32/g;
-		s/OSAL_CPU_TO_LE32/cpu_to_le32/g;
-		s/OSAL_CPU_TO_LE16/cpu_to_le16/g;
-		s/OSAL_LE32_TO_CPU/le32_to_cpu/g;
-		s/OSAL_LE16_TO_CPU/le16_to_cpu/g;
-
-		# CRC-32
-		s/OSAL_CRC32/crc32/g;
-
-		# CRC-8
-		s/static u8 cdu_crc8_table\[CRC8_TABLE_SIZE\]/DECLARE_CRC8_TABLE(cdu_crc8_table)/g;
-		s/OSAL_CRC8_POPULATE/crc8_populate_msb/g;
-		s/OSAL_CRC8/crc8/g;
-
-		# Struct initialization (C99):
-		s/${comment_start}\s*SF\:${parm}${comment_end}/.$1 = /g;
-
-		# Ecore return values
-		s/enum _ecore_status_t/int/go;
-		s/ECORE_SUCCESS/0/go;
-		s/ECORE_NOMEM/-ENOMEM/go;
-		s/ECORE_BUSY/-EBUSY/go;
-		s/ECORE_TIMEOUT/-EBUSY/go; # FIXME - probably not the right one
-		s/ECORE_ABORTED/-EBUSY/go;
-		s/ECORE_INVAL/-EINVAL/go;
-		s/ECORE_NORESOURCES/-EINVAL/go;
-		s/ECORE_NOTIMPL/-EINVAL/go;
-		s/ECORE_UNKNOWN_ERROR/-EINVAL/go;
-		s/ECORE_AGAIN/-EAGAIN/go;
-		s/ECORE_EXISTS/-EEXIST/go;
-		s/ECORE_NODEV/-ENODEV/go;
-		s/ECORE_IO/-EIO/go;
-		s/ECORE_CONN_RESET/-ECONNRESET/go;
-		s/ECORE_CONN_REFUSED/-ECONNREFUSED/go;
-
-		# TODO - this should be generated, but currently we don't
-		# have a tight 'expression-element' definition which isn't
-		# greedy, so we solve most cases explicitly.
-		s/if \(rc != 0\)/if (rc)/go;
-		s/if \(rc == 0\)/if (!rc)/go;
-
-		# Register access - remove the unnecessary hwfn reference
-		s/DIRECT_REG_WR\(${parm},${parm},${parm}\)/DIRECT_REG_WR($2, $3)/g;
-		s/DIRECT_REG_RD\(${parm},${parm}\)/DIRECT_REG_RD($2)/g;
-
-		# ecore	--> qed
-		s/ecore/qed/go;
-		s/ECORE/QED/go;
-		s/p_dev/cdev/go;
-
-		s/OSAL_PCI_FIND_CAPABILITY\(([^,]*)/pci_find_capability\($1->pdev/g;
-		s/OSAL_PCI_FIND_EXT_CAPABILITY\(([^,]*)/pci_find_ext_capability\($1->pdev/g;
-		s/OSAL_PCI_READ_CONFIG_DWORD\(([^,]*)/pci_read_config_dword\($1->pdev/g;
-		s/OSAL_PCI_READ_CONFIG_WORD\(([^,]*)/pci_read_config_word\($1->pdev/g;
-		s/OSAL_PCI_READ_CONFIG_BYTE\(([^,]*)/pci_read_config_byte\($1->pdev/g;
-		s/OSAL_PCI_WRITE_CONFIG_WORD\(([^,]*)/pci_write_config_word\($1->pdev/g;
-		s/PCICFG_DEVICE_STATUS_CONTROL_2_ATOMIC_REQ_ENABLE/PCI_EXP_DEVCTL2_LTR_EN/g;
-		s/PCICFG_DEVICE_STATUS_CONTROL_2/p_hwfn->cdev->pdev->pcie_cap + PCI_EXP_DEVCTL2/g;
-		s/PCICFG_VENDOR_ID_OFFSET/PCI_VENDOR_ID/g;
-		s/PCICFG_DEVICE_ID_OFFSET/PCI_DEVICE_ID/g;
-
-		s/OSAL_BAR_SIZE\(${parm},${parm}\)/pci_resource_len($1->pdev, ($2 > 0) ? 2 : 0)/g;
-		#there is already an existing defination of SECTION_SIZE in
-		#./arch/arm64/include/asm/pgtable.h. This fixes compilation error on arm64
-		s/SECTION_SIZE/QED_SECTION_SIZE/go;
-
-		# typedef struct name	--> struct name
-		s/typedef\s+struct\s+$parm/struct $1/g;
-		s/typedef\s+struct$parm;/struct $1;/g;
-
-		# ^} name_t; --> };
-		s/^\s*\}\w+_t;/\};/go;
-
-		# enum name_t --> enum name {
-		s/enum\s+(${allowed_t})_t/enum $1/g;
-
-		# name_t --> struct name (unless it is in the allowed_t list)
-		if (!(m/enum/g)) {
-			s/(\w+${allowed_t})_t\s$parm/struct $1 $2/g;
-		}
-	};
-};
-
-sub translate_segment {
-	my $was_comment = $inside_cmt;
-	my $orig_line = $_[0];
-	my $combined_line = $_[0];
-	my $combined_ref = "";
-
-	# The assumption is that in the ecore, no comment will start again in a
-	# line that just ended a comment
-	if ($_[0] =~ m/${comment_end}/g) {
-		$inside_cmt = 0;
-	} elsif ($_[0] =~ m/${comment_start}.*/g) {
-		$inside_cmt = 1;
-	}
-
-	if ($_[0] =~ m/${pp_line}/) {
-		$pp_segment = 1;
-	}
-
-	translate_line($orig_line);
-	$combined_ref = $orig_line;
-
-	# Assuming that multi comment line will not start after code but on a
-	# separate line. Combine lines until the line-ending character.
-	if ($inside_cmt == 0 && $was_comment == 0 && $_[0] !~ m/\/\//go && $pp_segment == 0) {
-		while ($combined_line !~ m/$c_line_end\s*/) {
-			my $curr_pos = tell(EFILE);
-			my $newline = <EFILE> || last;
-			chomp $newline;
-			if ($newline =~ m/${comment_start}|\/\/|${pp_line}/go) {
-				seek(EFILE, $curr_pos, 0);
-				last;
-			}
-			$combined_line .= " " . $newline;
-			translate_line($newline);
-			$orig_line .= "\n" . $newline;
-			$combined_ref .= " " . $newline;
-#			print STDERR "Combining lines: '$combined_ref'\n";
-		}
-	}
-	translate_line($combined_line);
-	if ($combined_ref eq $combined_line) {
-		# Translating each line seperately yeild the same result
-		# as the combined line together
-		$_[0] = $orig_line;
-	} elsif ($combined_line =~ m/^\s*$/) {
-		$_[0] = "";
-	} else {
-		# Use the combined line - save the original indent, and colapse
-		# all other white-spaces to a single space.
-		$combined_line =~ m/^(\s*)(\S.*)/o;
-		my $indent = $1;
-		my $content = $2;
-
-		$content =~ s/\s+/ /go;
-		$_[0] = $indent . $content;
-	}
-
-	# only if the current line is pre-processor and it ends with "\" the next
-	# one is still pre-processor line
-	if ($pp_segment != 1 || $_[0] !~ m/\\\s*$/go) {
-		$pp_segment = 0;
-	}
-}
-
-sub add_crc8_header_prefix {
-	my $prefix = "\#if \(!defined \(_DEFINE_CRC8\) && !defined\(_MISSING_CRC8_MODULE\)\) /* QED_UPSTREAM */\n";
-	print "$prefix";
-}
-
-sub add_crc_header_suffix {
-	my $suffix = "\#else\n";
-	$suffix   .= "\#include \"qed_compat.h\"\n";
-	$suffix   .= "\#endif\n";
-	print "$suffix";
-}
-
-##############################################################################
-#                         Script entry point                                 #
-##############################################################################
-die ("Need to receive <input file>  as argument\n") unless(@ARGV > 0);
-open(EFILE, "<$ARGV[0]") || die("Cannot open $ARGV[0]: $!\n");
-our ($target_filename, $target_dir, $target_tmp) = fileparse($ARGV[0], qr/\.[^.]*/);
-my $target_output = "";
-
-# There are a couple of large files which we skip instead of process
-if ($target_filename =~ m/init_values|reg_addr/) {
-	while (<EFILE>) {
-		print $_;
-	}
-	goto out;
-}
-
-# Process the data
-NEXT: while (my $inline = <EFILE>) {
-	chomp $inline;
-
-	# Take empty lines as-is
-	if ($inline =~ m/^\s*$/go) {
-		$target_output .= "\n";
-		goto NEXT;
-	}
-
-	# This might read a couple more lines, to allow multi-line pattern matching
-	# following this, line would be translated into linux format
-	translate_segment($inline);
-
-	# Find out which includes need to be added, and populate the 'used' hashes accordingly
-	if (create_include_list($inline) == 0) {
-		$target_output .= "$inline\n";
-	}
-}
-
-# If a header file, add an encapsulating ifdef
-if ($target_filename =~ m/.*\.h/) {
-	my $ifdef_name = uc $target_filename;
-	$ifdef_name =~ s/\./_/go;
-	print "\#ifndef _$ifdef_name\n\#define _$ifdef_name\n";
-}
-
-# Print the new file; Start with the inclusions
-our %printed_globals = ();
-print "\#include <linux/types.h>\n";
-foreach my $include_header (sort keys %used_ig) {
-	print "\#include <$include_header>\n";
-	$printed_globals{$include_header} = 1;
-}
-foreach my $include_header (sort keys %used_igt) {
-	unless ($printed_globals{$include_header}) {
-		if ($include_header =~ m/linux\/crc8.h/) {
-			add_crc8_header_prefix();
-		}
-		print "\#include <$include_header>\n";
-		if ($include_header =~ m/linux\/crc8.h/) {
-			add_crc_header_suffix();
-		}
-	}
-	$printed_globals{$include_header} = 1;
-}
-foreach my $include_header (sort keys %used_igdt) {
-	my $header_name = $includes_global_dependent_table{$include_header}{"HEADER"};
-	my $header_cond = $includes_global_dependent_table{$include_header}{"LIMIT"};
-	print "\#if $header_cond\n\#include <$header_name>\n\#endif\n" unless ($printed_globals{$header_name});
-	$printed_globals{$header_name} = 1;
-}
-
-# Until we'll use a binary file, we need to put the local inclusions prior to the local includes
-if ($target_filename =~ m/.*\.c/) {
-	my $prevent_include = "";
-	foreach my $struct_name (sort keys %prevent_table) {
-		unless ($prevent_table{$struct_name}{"found"}) {
-			my $symbol = $prevent_table{$struct_name}{"prevent_symbol"};
-			$prevent_include .= "\#define __PREVENT_${symbol}__\n";
-		}
-	}
-	print $prevent_include;
-}
-
-our %printed_locals = ();
-foreach my $include_header (sort {
-	#There are a couple of headers that we want to keep in order
-	my $a_index = 0;
-	my $b_index = 0;
-
-	++$a_index until $il_order[$a_index] eq $a or $a_index >= $#il_order;
-	++$b_index until $il_order[$b_index] eq $b or $b_index >= $#il_order;
-
-	my $val = 0;
-	if ($a_index < $b_index) {
-		$val = -1;
-	} elsif ($a_index > $b_index) {
-		$val = 1;
-	}
-	if ($val != 0) {
-		$val
-	} else {
-		$a cmp $b;
-	}
-} keys %used_il) {
-	print "\#include \"$include_header\"\n";
-	$printed_locals{$include_header} = 1;
-}
-foreach my $include_header (sort keys %used_ilt) {
-	print "\#include \"$include_header\"\n";
-	$printed_locals{$include_header} = 1;
-}
-foreach my $include_header (sort keys %used_ildt) {
-	my $header_name = $includes_local_dependent_table{$include_header}{"HEADER"};
-	my $header_cond = $includes_local_dependent_table{$include_header}{"LIMIT"};
-	print "\#if $header_cond\n\#include \"$header_name\"\n\#endif\n" unless ($printed_locals{$header_name});
-	$printed_locals{$header_name} = 1;
-}
-
-# Print actual contents [non-include]
-print $target_output;
-
-# If a header file, add the closure to the encapsulating ifdef
-if ($target_filename =~ m/.*\.h/) {
-	print "\#endif";
-}
-
-
-out:
-close EFILE;
-exit 0;
diff --git a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/e2l_extract.pl b/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/e2l_extract.pl
deleted file mode 100644
index 8c4dc575e1..0000000000
--- a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/e2l_extract.pl
+++ /dev/null
@@ -1,151 +0,0 @@
-#!/usr/bin/perl -w
-
-our $pp_line = qr{\s*\#\s*};
-our $pp_if = qr{${pp_line}if};
-our $pp_ifndef = qr{${pp_line}ifndef};
-our $pp_elif = qr{${pp_line}elif};
-our $pp_else = qr{${pp_line}else};
-our $pp_end = qr{${pp_line}endif};
-our $pp_control = qr{${pp_if}|${pp_ifndef}|${pp_elif}|${pp_else}|${pp_else}|${pp_end}};
-our @pp_stack = ();
-
-our $defined = qr{(ifdef|[^\!]defined)[\s|\(]*};
-our $not_defined = qr{(ifndef|\!defined)[\s|\(]*};
-
-our $to_extract = 0;
-
-# These are a bit confusing, since we've inherited all kind of '#ifndef SYMBOL\n#define SYMBOL (foo)' expressions from the ecore.
-# And thus those we want to take would be placed under the 'throw_segments' and those that we want to remove under 'take_segments'.
-our $take_segments = qr{ATTN_DESC|aligned_u64|QM_OTHER_PQS_PER_PF|MISC_REG_DRIVER_CONTROL_0|LINUX_REMOVE|REMOVE_DBG|USE_DBG_BIN_FILE};
-#our $take_segments = qr{CONFIG_ECORE_ZIPPED_FW};
-our $throw_segments = qr{CONFIG_ECORE_SW_CHANNEL|CONFIG_ECORE_LOCK_ALLOC|UEFI|U64_HI|U64_LO|DIRECT_REG|ECORE_CONFIG_DIRECT_HWFN|MFW};
-
-our $take_pp = qr{${pp_line}ifdef\s*${take_segments}|${pp_line}ifndef\s*${throw_segments}|${pp_line}if\s*${take_segments}};
-our $throw_pp = qr{${pp_line}ifdef\s*${throw_segments}|${pp_line}ifndef\s*${take_segments}};
-
-##############################################################################
-#                               Subroutines                                  #
-##############################################################################
-
-# Take / discard according to the 'pp_stack' and extraction.
-sub process_line {
-	my $string_stack = join(' ', @pp_stack);
-
-	if ((@pp_stack == 0) || ($pp_stack[$#pp_stack] eq "INITIAL")) {
-		return $to_extract;
-	} elsif ((($string_stack =~ m/EXTRACT/) && ($to_extract == 0)) ||
-		 (($string_stack !~ m/EXTRACT/) && ($to_extract == 1))) {
-		return 1;
-	} elsif ($string_stack =~ m/REM|WAS/) {
-		return 1;
-	}
-
-	return 0;
-}
-
-
-# List of assumptions:
-#   - 'Special' segements that marked to be taken are NOT nested inside segments marked for deletion.
-#   - 'Special' marked segments always start with '#ifdef SYMBOL' or '#ifndef SYMBOL' [or special HSI conditions for '#if SYMBOL']
-#   - __EXTRACT__LINUX__ doesn't have else/elif clauses.
-#   - Ecore .h enclosing ifndefs are for symbols prefixed with __ECORE, #define of symbol on subsequent line.
-#     [and qed's sources with __QED]; HSI files are an exception, as they come in various flavours.
-sub process_pp_line {
-	my $inline = $_[0];
-	my $encolsing_ifndef = qr{__ECORE|__QED|_FW_FUNCS_DEFS_H|_INIT_DEFS_H|_DBG_FW_FUNCS_H|GTT_REG_ADDR_H|_INIT_FW_FUNCS_H|MCP_PUBLIC_H|NVM_CFG_H};
-
-	# First, take the special cases into account
-	if ($inline =~ m/\#ifndef __EXTRACT__LINUX__/) {
-		# We're starting a segment that will be taken ONLY if 'to_extract'
-		# is set. But we need to skip it.
-		push(@pp_stack, "EXTRACT");
-		return 1;
-	}
-
-	if ($inline =~ m/${pp_ifndef}\s*${encolsing_ifndef}/) {
-		# We've hit a header-file surrounding ifndef; Need to extract it,
-		# since it's possible this is only a part of a resulting file.
-		$_[0] = <EFILE>; # Skip the following '#define'.
-		push(@pp_stack, "INITIAL");
-		return 1;
-	}
-
-	# Handle all regular pre-processor macros
-	if ($inline =~ m/${pp_if}/) {
-		if ($inline =~ m/${take_pp}/) {
-			# This Segement needs to silently be taken; This line has to be discarded.
-			push(@pp_stack, "ADD");
-			return 1;
-		} elsif ($inline =~ m/${throw_pp}/) {
-			# This Segmennt needs to be thrown silently; This line has to be discarded.
-			push(@pp_stack, "REM");
-			return 1;
-		} else {
-			# This is an actual if condition, needs to be added/removed only according to nesting.
-			push(@pp_stack, "SEG");
-		}
-	} elsif ($inline =~ m/${pp_else}|${pp_elif}/) {
-		if( ($pp_stack[$#pp_stack] eq "REM") && ($inline =~ m/${pp_else}/)){
-			# Else-clause of a special 'remove' segment becomes an 'add'.
-			pop(@pp_stack);
-			push(@pp_stack, "ADD");
-			return 1;
-		} elsif ($pp_stack[$#pp_stack] eq "ADD") {
-			# Mark all remaining else/elif clauses of special 'add' as 'was' for removal.
-			pop(@pp_stack);
-			push(@pp_stack, "WAS");
-			return 1;
-		}
-	} elsif ($inline =~ m/${pp_end}/) {
-		my $last_symbol = pop(@pp_stack);
-		if (!($last_symbol eq "SEG")) {
-			# The closure of all special segments needs to be removed
-			return 1;
-		}
-	}
-
-	return process_line($inline);
-}
-
-##############################################################################
-#                         Script entry point                                 #
-##############################################################################
-my $output_string = "";
-
-die ("Need to receive <input file> <optional 'extract'>  as arguments\n") unless(@ARGV > 0);
-open(EFILE, "<$ARGV[0]") || die("Cannot open $ARGV[0]: $!\n");
-
-# There are a couple of large files which we skip instead of process
-if (($ARGV[0] =~ m/init_values|reg_addr/) && ($ARGV[0] !~ m/gtt_reg_addr/)) {
-	while (<EFILE>) {
-		print $_;
-	}
-	goto out;
-}
-
-# Mark whether to extract; When extracting will take ONLY content under
-# ifndef __EXTRACT__LINUX__
-if (@ARGV > 1) {
-	$to_extract = 1;
-}
-
-NEXT_LINE: while (my $inline = <EFILE>) {
-	chomp $inline;
-	my $to_skip = 0;
-
-	if ($inline =~ m/${pp_control}/)  {
-		$to_skip = process_pp_line($inline);
-	} else {
-		$to_skip = process_line($inline);
-	}
-
-	if ($to_skip == 0) {
-		$output_string .= "$inline\n";
-	}
-}
-
-print $output_string;
-
-out:
-close EFILE;
-exit 0;
diff --git a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/generate_pdf.sh b/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/generate_pdf.sh
deleted file mode 100644
index d3b80565fb..0000000000
--- a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/generate_pdf.sh
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/bin/bash
-#
-# This Script generates  a .pdf from Latex src
-###############################################
-
-TEX_FILE=""
-TEX_DIR=""
-CUR_DIR=`pwd`;
-
-# Check inputs
-if [ $# -eq 1 ]; then
-	TEX_FILE=$(basename $1)
-	TEX_DIR=$(dirname $1)
-	echo "File is located at $TEX_DIR"
-else
-	echo "Need to receive a .tex file as input"
-	exit 1
-fi
-
-cd $TEX_DIR
-
-# Create temporary directory for products
-if [ -d tmp ]; then
-	rm -rf tmp/*
-else
-	mkdir tmp
-fi
-
-# Create list of funcs
-FUNCS=`grep myfunc ${TEX_FILE}.tex | grep -v newcommand | grep -v "^%" | sed -e 's/.*\myfunc{\([a-zA-Z0-9_\\]*\)}.*/\1/' | sed -e 's/\\\_/\_/g' `
-
-# Create Snippets
-for func in $FUNCS; do
-	API_FILE=`grep -l ecore_$func\( ../*_api*.h`
-	if [ -z "$API_FILE" ]; then
-		echo "$func - Missing definition in API header files"
-		continue
-	fi
-
-	BACK=1
-	while [ $BACK -lt 100 ]; do
-		EMPTY_BACK=`grep ${func}\( -B${BACK} $API_FILE | grep "^$" | wc --lines`;
-		if [ $EMPTY_BACK -gt 0 ]; then
-			BACK=`expr $BACK - 1`
-			break;
-		else
-			BACK=`expr $BACK + 1`
-		fi
-	done
-
-	FORWARD=0
-	while [ $FORWARD -lt 100 ]; do
-		EMPTY_FORWARD=`grep ${func}\( -A${FORWARD} $API_FILE | grep ");" | wc --lines`;
-		EMPTY_FORWARD2=`grep ${func}\( -A${FORWARD} $API_FILE | grep "{" | wc --lines`;
-		EMPTY=`expr $EMPTY_FORWARD + $EMPTY_FORWARD2`
-		if [ $EMPTY -gt 0 ]; then
-			break;
-		else
-			FORWARD=`expr $FORWARD + 1`
-		fi
-	done
-
-	snippet=`grep ${func}\( -A${FORWARD} -B${BACK} $API_FILE | sed -e 's/ {/;/g' | grep -v "^\s*\*\s*$"`
-
-	echo "$snippet" > snippets/${func}_generated.h
-done
-
-# Generate the File
-pdflatex -output-directory=tmp -interaction=nonstopmode $TEX_FILE.tex
-pdflatex -output-directory=tmp -interaction=nonstopmode $TEX_FILE.tex
-makeindex tmp/$TEX_FILE.idx
-makeindex tmp/$TEX_FILE.idx
-bibtex -terse tmp/$TEX_FILE.aux
-bibtex -terse tmp/$TEX_FILE.aux
-pdflatex -output-directory=tmp -interaction=nonstopmode $TEX_FILE.tex
-pdflatex -output-directory=tmp -interaction=nonstopmode $TEX_FILE.tex
-
-# Move the Generated file and cleanup
-cp tmp/$TEX_FILE.pdf .
-rm -rf tmp
-
-cd $CUR_DIR
-
diff --git a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/install_req_latex.sh b/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/install_req_latex.sh
deleted file mode 100644
index f57e68ebf1..0000000000
--- a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/install_req_latex.sh
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/bash
-#
-# Install the necessary packages to enable the pdf generate script to work properly on the ecore_documentation.
-# The script assumes yum is supported and was tested on Fedora.
-###############################################################################################################
-
-yum install -y texmaker
-yum install -y texlive-tocbibind
-yum install -y texlive-titlesec
-yum install -y texlive-lipsum
-yum install -y texlive-mdframed
-
-#
-# May 2016 - by Ram
-# I have had no success with the above script. So here is what I did to make it work for me:
-#  1) Install texmaker. Since yum experienced issues finding a libpoppler-qt4.so.14 I forced the installation
-#  2) I have installed the below packages. Note that I didn't check what is the minimum required from the list
-#        yum install -y texlive-latex-bin-bin
-#        yum install -y texlive-bibtex-bin-bin
-#        yum install -y texlive-bibtex-bin
-#        yum install -y texlive-babel-english
-#        yum install -y texlive-fancyhdr
-#        yum install -y texlive-amscls 
-#        yum install -y pandoc-pdf
-#        yum install -y texlive-cm-super
-#        yum install -y texlive\*fonts\*
-
diff --git a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/replace_fw.csv b/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/replace_fw.csv
deleted file mode 100644
index 720608a7c1..0000000000
--- a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/replace_fw.csv
+++ /dev/null
@@ -1,69 +0,0 @@
-Enable,Tag,Group,Source,Destination,Skip_P4,Prefix,Sed,Type,Binary
-1,,Init,Init/gtt_reg_addr.h,ecore_gtt_reg_addr.h,,,,FW_TOOLS,
-1,,Init,Init/gtt_values.h,ecore_gtt_values.h,,,,FW_TOOLS,
-1,,Init,Init/init_values.h,ecore_init_values.h,,,,FW_TOOLS,
-1,,Init,Init/init_values_zipped.h,ecore_init_values_zipped.h,,,,FW_TOOLS,
-1,,Init,Init/iro.h,ecore_iro.h,,,,FW_TOOLS,
-1,,Init,Init/iro_values.h,ecore_iro_values.h,,,,FW_TOOLS,
-1,,Init,Init/reg_addr.h,../../hsi/hw/reg_addr.h,,,,FW_TOOLS,
-1,,Init,Init/rt_defs.h,ecore_rt_defs.h,,,,FW_TOOLS,
-1,debug_tools,Init,Init/dbg_values.h,ecore_dbg_values.h,,,,FW_TOOLS,
-1,debug_tools,Init,Init/dbg_values_user.h,ecore_dbg_values_user.h,,,,,
-1,debug_tools,Init,Init/dbg_values.bin,ecore_dbg_values.bin,,,,FW_TOOLS,yes
-1,,Init,Init/init_values.bin,ecore_init_values.bin,,,,FW_TOOLS,yes
-1,,Init,Init/init_values_zipped.bin,ecore_init_values_zipped.bin,,,,FW_TOOLS,yes
-1,,Init,Init/bb.rdf,../ediag/rdfs/bb.rdf,,,,,
-1,,Init,Init/k2.rdf,../ediag/rdfs/k2.rdf,,,,,
-1,,Init,Init/e5.rdf,../ediag/rdfs/e5.rdf,,,,,
-1,,Init,Init/except.tcl,../ediag/scripts/except.tcl,,,,,
-1,,Targets,Targets/ecore_hsi_common.h,ecore_hsi_common.h,,,,FW_HSI,
-1,,Targets,Targets/ecore_hsi_eth.h,ecore_hsi_eth.h,,,,FW_HSI,
-1,,Targets,Targets/ecore_hsi_toe.h,ecore_hsi_toe.h,,,,FW_HSI,
-1,,Targets,Targets/ecore_hsi_fcoe.h,ecore_hsi_fcoe.h,,,,FW_HSI,
-1,,Targets,Targets/ecore_hsi_iscsi.h,ecore_hsi_iscsi.h,,,,FW_HSI,
-1,,Targets,Targets/ecore_hsi_roce.h,ecore_hsi_roce.h,,,,FW_HSI,
-1,,Targets,Targets/ecore_hsi_rdma.h,ecore_hsi_rdma.h,,,,FW_HSI,
-1,,Targets,Targets/ecore_hsi_iwarp.h,ecore_hsi_iwarp.h,,,,FW_HSI,
-1,debug_tools,Targets,Targets/ecore_hsi_debug_tools.h,ecore_hsi_debug_tools.h,,,,FW_HSI,
-1,,Targets,Targets/ecore_hsi_init_func.h,ecore_hsi_init_func.h,,,,FW_HSI,
-1,,Targets,Targets/ecore_hsi_init_tool.h,ecore_hsi_init_tool.h,,,,FW_HSI,
-1,,Targets,Targets/qede_hsi.h,../linux/qede/qede_hsi.h,,,s/common_hsi.h/..\\/qed\\/common_hsi.h/g\\ns/eth_common.h/..\\/qed\\/eth_common.h/g,,
-1,,Targets,Targets/qed_hsi_roce.h,../linux/qedr/qedr_hsi.h,,,s/common_hsi.h/..\\/qed\\/common_hsi.h/g\\ns/roce_common.h/..\\/qed\\/roce_common.h/g\\ns/qed_hsi_rdma.h/qedr_hsi_rdma.h/g,,
-1,,Targets,Targets/qed_hsi_roce.h,../linux/qedr/usrlib/src/qelr_hsi.h,,,s/qed_hsi_rdma.h/qelr_hsi_rdma.h/g,,
-1,,Targets,Targets/qed_hsi_rdma.h,../linux/qedr/qedr_hsi_rdma.h,,,s/rdma_common.h/..\\/qed\\/rdma_common.h/g,,
-1,,Targets,Targets/qed_hsi_rdma.h,../linux/qedr/usrlib/src/qelr_hsi_rdma.h,,,,,
-1,,Targets,Targets/*.h,hsi_repository/,,,,,
-1,,Targets,Targets/common_hsi.h,../common/include/common_hsi.h,,,,FW_HSI,
-1,,Targets,Targets/common_hsi.h,../linux/qedr/usrlib/src/common_hsi.h,,,,,
-1,,Targets,Targets/eth_common.h,../common/include/eth_common.h,,,,FW_HSI,
-1,,Targets,Targets/fcoe_common.h,../common/include/fcoe_common.h,,,,FW_HSI,
-1,,Targets,Targets/iscsi_common.h,../common/include/iscsi_common.h,,,,FW_HSI,
-1,,Targets,Targets/roce_common.h,../common/include/roce_common.h,,,,FW_HSI,
-1,,Targets,Targets/roce_common.h,../linux/qedr/usrlib/src/roce_common.h,,,,,
-1,,Targets,Targets/rdma_common.h,../common/include/rdma_common.h,,,,FW_HSI,
-1,,Targets,Targets/rdma_common.h,../linux/qedr/usrlib/src/rdma_common.h,,,,,
-1,,Targets,Targets/iwarp_common.h,../common/include/iwarp_common.h,,,,FW_HSI
-1,,Targets,Targets/iwarp_common.h,../linux/qedr/usrlib/src/iwarp_common.h,,,,,
-1,,Targets,Targets/storage_common.h,../common/include/storage_common.h,,,,FW_HSI,
-1,,Targets,Targets/tcp_common.h,../common/include/tcp_common.h,,,,FW_HSI,
-1,,Func,Func/ecore_init_fw_funcs.h,ecore_init_fw_funcs.h,,,,FW_TOOLS,
-1,,Func,Func/ecore_init_fw_funcs.c,ecore_init_fw_funcs.c,,#include "bcm_osal.h"\\n#include "ecore_hw.h"\\n#include "ecore_init_ops.h",,FW_TOOLS,
-1,debug_tools,Func,Func/ecore_dbg_fw_funcs.c,ecore_dbg_fw_funcs.c,,#include "bcm_osal.h"\\n#include "ecore.h"\\n#include "ecore_hw.h"\\n#include "ecore_mcp.h"\\n#include "spad_layout.h"\\n#include "nvm_map.h",,FW_TOOLS,
-1,debug_tools,Func,Func/ecore_dbg_fw_funcs.h,ecore_dbg_fw_funcs.h,,,,FW_TOOLS,
-1,debug_tools,Func,Func/ecore_user_dbg_fw_funcs.c,ecore_user_dbg_fw_funcs.c,,#include "bcm_osal.h"\\n#include "ecore.h"\\n#include "spad_layout.h"\\n#include "nvm_map.h",,FW_TOOLS,
-1,debug_tools,Func,Func/ecore_user_dbg_fw_funcs.h,ecore_user_dbg_fw_funcs.h,,,,FW_TOOLS,
-1,debug_tools,Func,Func/drv_user_dbg_fw_funcs.c,../common/drv_user_dbg_fw_funcs.c,,,,,
-1,debug_tools,Func,Func/drv_user_dbg_fw_funcs.h,../common/include/drv_user_dbg_fw_funcs.h,,,,,
-1,debug_tools,Func,Func/drv_dbg_fw_funcs.c,../ediag/drv_dbg_fw_funcs.c,,,,,
-1,debug_tools,Func,Func/drv_dbg_fw_funcs.h,../ediag/drv_dbg_fw_funcs.h,,,,,
-1,,Func,Func/drv_fcoe_fw_funcs.c,hsi_repository/,,,,,
-1,,Func,Func/drv_fcoe_fw_funcs.h,hsi_repository/,,,,,
-1,,Func,Func/drv_iscsi_fw_funcs.c,hsi_repository/,,,,,
-1,,Func,Func/drv_iscsi_fw_funcs.h,hsi_repository/,,,,,
-1,,Func,Func/drv_scsi_fw_funcs.c,hsi_repository/,,,,,
-1,,Func,Func/drv_scsi_fw_funcs.h,hsi_repository/,,,,,
-1,debug_tools,Func,Func/dbgUtils.tcl,../linux/add-ons/debug/debugfs/internal/dbgUtils.tcl,,,,,
-1,debug_tools,Func,Func/dbgUtils.tcl,../ediag/scripts/dbgUtils.tcl,,,,,
-1,,Func,Func/profiler.tcl,../ediag/scripts/profiler.tcl,,,,,
-1,,Arrays,Init/*_array.cpp,../../common/hw_stub/arrays_orig/,,,,,
-1,,Arrays,Init/RfArrayDef.h,../../common/hw_stub/arrays_orig/RfArrayDef.h,,,,,
diff --git a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/replace_fw.sh b/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/replace_fw.sh
deleted file mode 100644
index 7925f14f3e..0000000000
--- a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/replace_fw.sh
+++ /dev/null
@@ -1,339 +0,0 @@
-#!/bin/bash
-
-csv_file=`dirname $0`/replace_fw.csv
-
-files_modified_p4_edit=()
-files_modified_no_p4_edit=()
-
-function usage () {
-	echo "Usage: replace_fw.sh <source fw> <destination ecore> [-p <p4 client>] [-t <tag filter>]"
-	echo ""
-	echo "       source fw            path of the root folder of the source fw"
-	echo "       destination ecore    path of the destination ecore folder"
-	echo ""
-	echo "       p4 client            different p4 client instead of the one that is currently in use"
-	echo "                            (a value of AVOID_P4 will avoid p4 processing at all)"
-	echo ""
-	echo "       tag filter           preform operations on files that are specified in the tag filter"
-	echo "                            if tag filter is not specified preform opreations on all files"
-}
-
-function get_last_char() {
-	echo ${1: -1}
-}
-
-function trim_last_char() {
-	echo ${1%?}
-}
-
-# $1 - string
-# $2 - delimiter
-function get_last_substr() {
-	echo ${1##*$2}
-}
-
-function check_p4_exist() {
-	p4 -V &> /dev/null
-	ret=$?
-	return $ret
-}
-
-function check_p4_login() {
-	p4 login -s &> /dev/null
-	ret=$?
-	return $ret
-}
-
-function get_abs_filename() {
-	echo "$(cd "$(dirname "$1")" && pwd)/$(basename "$1")"
-}
-
-# $1 - array
-# $2 - item
-function is_item_in_array() {
-	if [[ `echo $1 | grep $2 | wc -l` > 0 ]]; then true; else false; fi
-}
-
-# $1 - target file
-# $2 - modified files array ('0' - "p4_edit" array, '1' - "no_p4_edit" array)
-function add_file_to_modified_array() {
-	local abs_file_path=$(get_abs_filename $1)
-
-	# add the file only if it wasn't already added to the array
-	if [[ $2 == 0 ]]; then
-		is_item_in_array "${files_modified_p4_edit[*]}" $abs_file_path || files_modified_p4_edit=(${files_modified_p4_edit[@]} $abs_file_path)
-	else
-		is_item_in_array "${files_modified_no_p4_edit[*]}" $abs_file_path || files_modified_no_p4_edit=(${files_modified_no_p4_edit[@]} $abs_file_path)
-	fi
-}
-
-#
-# check usage
-#
-if [ $# -lt 2 ]; then
-	usage
-	exit 1
-fi
-
-fw_path=$1
-ecore_path=$2
-shift 2
-
-# If the user doesn't enter tag filter, then don't filter by tag
-tag_filter="none"
-
-# Parse options received from user
-while getopts ":p:t:" option; do
-	case $option in
-	p)
-		p4_client=$OPTARG
-		;;
-	t)
-		tag_filter=$OPTARG
-		;;
-	\?)
-		echo "unknown option: -$OPTARG"
-		usage
-		exit 1
-		;;
-	:)
-		echo "missing option argument for -$OPTARG"
-		usage
-		exit 1
-		;;
-	esac
-done
-
-if [ ! $p4_client ]; then
-	p4cmd="p4"
-else
-	p4cmd="p4 -c $p4_client"
-fi
-
-#
-# remove a possible "/" suffix from the paths for a common handling
-#
-if [ $(get_last_char $fw_path) = "/" ]; then
-	fw_path=$(trim_last_char $fw_path)
-fi
-if [ $(get_last_char $ecore_path) = "/" ]; then
-	ecore_path=$(trim_last_char $ecore_path)
-fi
-
-#
-# avoid p4 processing if an "AVOID_P4" argument was provided.
-# if "AVOID_P4" wasn't used - exit in case (1) p4 doesn't exist, or (2) no p4 client is logged in
-#
-avoid_p4_at_all=0
-if [ "$p4_client" = "AVOID_P4" ]; then
-	echo " Avoiding any p4 actions"
-	avoid_p4_at_all=1
-else
-	check_p4_exist
-	if [ $? != 0 ]; then
-		echo " p4 is not installed - can either:"
-		echo "   (1) install p4"
-		echo "   (2) use '-p AVOID_P4' as an argument to avoid p4 processing"
-		echo " Aborting"
-		exit 1
-	else
-		check_p4_login
-		if [ $? != 0 ]; then
-			echo " No p4 user is logged in - can either:"
-			echo "   (1) log in to p4"
-			echo "   (2) use '-p AVOID_P4' as an argument to avoid p4 processing"
-			echo " Aborting"
-			exit 1
-		fi
-	fi
-fi
-
-#
-# go over the csv file and verify that all src/dst actually exist
-#
-abort_file_not_exist=0
-abort_no_destination=0
-found_tag=0
-line_num=0
-while read line
-do
-	line_num=$((line_num+1))
-	# skip the titles line
-	if [ $line_num == 1 ]; then continue; fi
-
-	# extract the csv line inputs
-	enabled=`echo $line | cut -d ',' -f1`
-	tag=`echo $line | cut -d ',' -f2`
-	src=`echo $line | cut -d ',' -f4`
-	dst=`echo $line | cut -d ',' -f5`
-
-	if [[ "$enabled" == "0" ]]; then continue; fi
-	if [ "$tag_filter" != "none" ]; then
-		if [ "$tag" != "$tag_filter" ]; then continue; else found_tag=1; fi
-	fi
-
-	src_files_num=0
-	if [ $src ]; then
-		src=${fw_path}/${src}
-		ls $src &> /dev/null
-		if [ $? != 0 ]; then
-			echo " $csv_file: line $line_num: error: cannot access $src"
-			abort_file_not_exist=1
-		else
-			src_files_num=`ls $src | wc -l`
-		fi
-	fi
-
-	dst_files_num=0
-	if [ $dst ]; then
-		dst=${ecore_path}/${dst}
-		ls $dst &> /dev/null
-		if [ $? != 0 ]; then
-			echo " $csv_file: line $line_num: error: cannot access $dst"
-			abort_file_not_exist=1
-		else
-			dst_files_num=`ls $dst | wc -l`
-		fi
-	else
-		echo " $csv_file: line $line_num: error: no destination"
-		abort_no_destination=1
-	fi
-
-	# for a case where the destination is a folder (valid when the source is a regular expression)
-	if [ $src_files_num != 0 ] && [ $dst_files_num -lt $src_files_num ]; then
-		echo " $csv_file: line $line_num: error: the number of source files and destination files is not equal ($src_files_num source files, $dst_files_num destination files)"
-		abort_no_destination=1
-	fi
-done < $csv_file
-
-if [[ "$tag_filter" != "none" && $found_tag == 0 ]]; then
-	echo " tag $tag_filter doesn't exist"
-	exit 1
-fi
-
-if [ $abort_file_not_exist == 1 ] || [ $abort_no_destination == 1 ]; then
-	echo " Aborting"
-	exit 1
-fi
-
-#
-# go over the csv file and process (copy / add prefix / sed script) where needed
-#
-echo "Updating the files according to the $csv_file file"
-line_num=0
-while read line
-do
-	line_num=$((line_num+1))
-	# skip the titles line
-	if [ $line_num == 1 ]; then continue; fi
-
-	# extract the csv line inputs
-	enabled=`echo $line | cut -d ',' -f1`
-	tag=`echo $line | cut -d ',' -f2`
-	src=`echo $line | cut -d ',' -f4`
-	dst=`echo $line | cut -d ',' -f5`
-	skip_p4_this_file=`echo $line | cut -d ',' -f6`
-	prefix=`echo $line | cut -d ',' -f7`
-	sed_cmd=`echo $line | cut -d ',' -f8`
-	binary=`echo $line | cut -d ',' -f10`
-
-	if [[ "$enabled" == "0" ]]; then continue; fi
-	if [[ "$tag_filter" != "none" && "$tag" != "$tag_filter" ]]; then continue; fi
-
-	if [[ $avoid_p4_at_all == 0 && $skip_p4_this_file != 1 ]]; then modified_array=0; else modified_array=1; fi
-
-	skip_copy=0
-	if [ ! $src ]; then skip_copy=1; fi
-	src=${fw_path}/${src}
-	dst=${ecore_path}/${dst}
-
-	# detect a case where the destination is a folder (valid when the source is a regular expression)
-	is_dst_folder=0
-	dst_regex=$dst
-	if [ $(get_last_char $dst) = "/" ]; then
-		is_dst_folder=1
-		# append the source regular expression to the destination folder path
-		dst_regex=${dst_regex}$(get_last_substr "$src" "/")
-	fi
-
-	# copy
-	if [ $skip_copy == 0 ]; then
-		for src_file in `ls $src 2> /dev/null`
-		do
-			dst_file=$dst
-			if [ $is_dst_folder == 1 ]; then
-				# append the source file name to the destination folder path
-				dst_file=${dst_file}$(get_last_substr "$src_file" "/")
-			fi
-
-			if [ `diff --strip-trailing-cr $src_file $dst_file | wc -l` -gt 0 ]; then
-				chmod u+w $dst_file
-				cp -f $src_file $dst_file
-				if [ "$binary" == "" ]; then
-					$ecore_path/tools/dos2unix.sh $dst_file
-				fi
-				add_file_to_modified_array $dst_file $modified_array
-			fi
-		done
-	fi
-
-	# prefix
-	if [ "$prefix" != "" ]; then
-		for dst_file in `ls $dst_regex 2> /dev/null`; do
-			(echo -e $prefix && cat $dst_file) > $dst_file.new
-			chmod u+w $dst_file
-			mv -f $dst_file.new $dst_file
-			add_file_to_modified_array $dst_file $modified_array
-		done
-	fi
-
-	# sed
-	if [ "$sed_cmd" != "" ]; then
-		echo -e "$sed_cmd" > sed_cmd.tmp
-		for dst_file in `ls $dst_regex 2> /dev/null`; do
-			sed -f sed_cmd.tmp $dst_file > $dst_file.new
-			chmod u+w $dst_file
-			mv -f $dst_file.new $dst_file
-			add_file_to_modified_array $dst_file $modified_array
-		done
-		rm -f sed_cmd.tmp
-	fi
-done < $csv_file
-
-#
-# Check out the files which were marked as modified
-#
-if [[ ${#files_modified_p4_edit[@]} > 0 ]]; then
-	echo "Checking out the modified files"
-	$p4cmd edit ${files_modified_p4_edit[@]} > /dev/null
-
-	# undo checking out in case a file is unchanged
-	$p4cmd revert -a ${files_modified_p4_edit[@]} > revert.tmp
-	for ((i=0; i<${#files_modified_p4_edit[@]}; i++)); do
-		partial_file_path=`echo ${files_modified_p4_edit[$i]} | sed -e 's/\(.*\)\/579xx\/\(.*\)/\/579xx\/\2/g'`
-		if [ `grep $partial_file_path revert.tmp | wc -l` -gt 0 ]; then
-			files_modified_p4_edit=(${files_modified_p4_edit[@]:0:$i} ${files_modified_p4_edit[@]:$(expr $i + 1)})
-			# update the index since the array size was decreased and the elements were shifted
-			i=$((i-1))
-		fi
-	done
-	rm -f revert.tmp
-fi
-
-#
-# summary
-#
-for ((i=0; i<${#files_modified_p4_edit[@]}; i++)); do
-	if [[ $i == 0 ]]; then
-		echo "The following [ ${#files_modified_p4_edit[@]} ] files were modified and checked out:"
-	fi
-	echo "  ${files_modified_p4_edit[$i]}"
-done
-for ((i=0; i<${#files_modified_no_p4_edit[@]}; i++)); do
-	if [[ $i == 0 ]]; then
-		echo "The following [ ${#files_modified_no_p4_edit[@]} ] files were modified but were not checked out:"
-	fi
-	echo "  ${files_modified_no_p4_edit[$i]}"
-done
-
-exit 0
diff --git a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/ReplaceFwAndCompile.bat b/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/ReplaceFwAndCompile.bat
deleted file mode 100644
index 28cd4f338d..0000000000
--- a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/ReplaceFwAndCompile.bat
+++ /dev/null
@@ -1,30 +0,0 @@
-@echo off
-
-rem Description: Replaces the FW version in the ecore environment with the specified FW, and compiles the ecore environment.
-rem Usage:       ReplaceFwAndCompile <Source FW Folder> [File Type]
-rem              <FW Dir> should point to a generated FW folder (e.g. nx2\579xx\smc\everest4\Fw\Main\Output\HSI).
-rem              <File Type> type of files to be replaced (one of the options below). If omitted, all files are replaced.
-rem              - FW_HSI: FW data types and constants.
-rem              - FW_TOOLS: FW functions (HSI Func) and Init Tool generated files.
-
-set srcFolder=%1
-set dstFolder=%cd%\..\..\
-set csvKey=%cd%\..\replace_fw.csv
-set type=ALL
-if NOT "%2"=="" set type=%2
-
-perl -w replace_fw.pl -i %srcFolder% -d %dstFolder% -c %csvKey% -t %type%
-IF NOT "%ERRORLEVEL%"=="0" goto replaceError
-
-compile_ecore.bat
-IF NOT "%ERRORLEVEL%"=="0" goto compileError
-
-echo Compilation was successful!
-
-goto :EOF
-:replaceError
-echo Failed replacing FW!
-goto :EOF
-:compileError
-echo Failed in ecore compilation!
-goto :EOF
\ No newline at end of file
diff --git a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/bin/as.exe b/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/bin/as.exe
deleted file mode 100644
index 6f74395cca..0000000000
--- a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/bin/as.exe
+++ /dev/null
diff --git a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/bin/cc1.exe b/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/bin/cc1.exe
deleted file mode 100644
index 0421c21373..0000000000
--- a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/bin/cc1.exe
+++ /dev/null
diff --git a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/bin/gcc.exe b/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/bin/gcc.exe
deleted file mode 100644
index 08d97319f2..0000000000
--- a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/bin/gcc.exe
+++ /dev/null
diff --git a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/bin/libgmp-10.dll b/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/bin/libgmp-10.dll
deleted file mode 100644
index 32f3973867..0000000000
--- a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/bin/libgmp-10.dll
+++ /dev/null
diff --git a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/bin/libmpc-2.dll b/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/bin/libmpc-2.dll
deleted file mode 100644
index 1924b6c8e5..0000000000
--- a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/bin/libmpc-2.dll
+++ /dev/null
diff --git a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/bin/libmpfr-1.dll b/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/bin/libmpfr-1.dll
deleted file mode 100644
index 85c2222e2a..0000000000
--- a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/bin/libmpfr-1.dll
+++ /dev/null
diff --git a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/compile_ecore.bat b/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/compile_ecore.bat
deleted file mode 100644
index d1fe501c4d..0000000000
--- a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/compile_ecore.bat
+++ /dev/null
@@ -1,11 +0,0 @@
-@echo off
-
-path=%path%;%cd%\bin
-set flags=-DCONFIG_ECORE_L2 -DCONFIG_ECORE_ROCE -DCONFIG_ECORE_FCOE -DCONFIG_ECORE_ISCSI -DCONFIG_ECORE_LL2 -DCONFIG_ECORE_SRIOV -DECORE_PACKAGE -I./include -I./../../hsi/hw/ -I./../../hsi/mcp/
-pushd ..\..\
-
-tools\windows\bin\gcc.exe -c *.c %flags%
-
-popd
-
-if "%1"=="TESTMACHINE" exit %ERRORLEVEL%
\ No newline at end of file
diff --git a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/replace_fw.pl b/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/replace_fw.pl
deleted file mode 100644
index a3a03cf134..0000000000
--- a/usr/src/uts/common/io/qede/579xx/drivers/ecore/tools/windows/replace_fw.pl
+++ /dev/null
@@ -1,126 +0,0 @@
-#!/usr/bin/perl -w
-
-use strict;
-use English;
-
-
-#=======================================================================
-#PROCESS ARGUMENTS
-#=======================================================================
-my $srcKey = "-i";
-my $destKey = "-d";
-my $csvKey= "-c";
-my $typeKey= "-t";
-
-#SET DEFAULT VALUES
-my %args = ( $srcKey=>'none', $destKey=>'none', $csvKey => 'none', $typeKey=>'ALL');
-
-#PARSE RECIEVED ARGUMENTS
-parse_arguments();
-my $srcFolder=$args{$srcKey};
-my $destFolder=$args{$destKey};
-my $csvFile=$args{$csvKey};
-my $type=$args{$typeKey};
-
-die "Type can only be ALL, FW_HSI, FW_TOOLS" unless ($type eq 'ALL' || $type eq 'FW_HSI' || $type eq 'FW_TOOLS');
-
-my %types = ('FW_HSI' => 0, 'FW_TOOLS' => 0);
-if ($type eq 'ALL')
-{
-	$types{'FW_HSI'} = 1;
-	$types{'FW_TOOLS'} = 1;
-}
-else
-{
-	$types{$type} = 1;
-}
-#=======================================================================
-#MAIN 
-#=======================================================================
-open (CSV,$csvFile) || die "Can't open $csvFile: $!\n";
-my @lines = <CSV>;
-
-#find columns
-my %columns = ('src' => 999, 'dst' => 999, 'type' => 999, 'prefix' => 999);
-my @headlines = split(/,/,$lines[0]);
-for (my $i=0; $i <= $#headlines; $i++)
-{
-	chomp($headlines[$i]);
-
-	if ($headlines[$i] eq 'Source')
-	{
-		$columns{'src'} = $i;
-	}
-	if ($headlines[$i] eq 'Destination')
-	{
-		$columns{'dst'} = $i;
-	}
-	if ($headlines[$i] eq 'Type')
-	{
-		$columns{'type'} = $i;
-	}
-	if ($headlines[$i] eq 'Prefix')
-	{
-		$columns{'prefix'} = $i;
-	}
-}
-die "Couldn't find required columns in csv (Source, Destination, Type)" unless
-(!($columns{'src'} == 999 || $columns{'dst'} == 999 || $columns{'type'} == 999 || $columns{'prefix'} == 999));
-
-my %modes = ( 0 => 'Read only', 1 => 'Write only', 2 => 'Read / Write' );
-my $totalErrorLevel = 0;
-
-for (my $i=1; $i <= $#lines; $i++)
-{
-	my @fields = split(/,/,$lines[$i]);
-	chomp($fields[$columns{'type'}]);
-	if ($fields[$columns{'type'}] ne '') 
-	{	
-		chomp($fields[$columns{'type'}]);
-		if ($types{$fields[$columns{'type'}]} == 1)
-		{
-			my $dstFile = $destFolder.'\\'.$fields[$columns{'dst'}];
-			my $srcFile = $srcFolder.'\\'.$fields[$columns{'src'}];
-			
-			open (SRC,$srcFile) || die "Can't open $srcFile: $!\n";
-			my @srcLines = <SRC>;
-			close SRC;
-			
-			chmod 0600, $dstFile or die "Couldn't chmod $dstFile: $!\n";
-			open (DST,">$dstFile") || die "Can't open $dstFile: $!\n";
-			if ($fields[$columns{'prefix'}] ne '') 
-			{
-				$fields[$columns{'prefix'}] =~ s/\\/\//g;	#Replace '\' with '/' so that split will be easy
-				my @includes = split('//n',$fields[$columns{'prefix'}]);
-				foreach my $include (@includes) {print DST $include."\n";}
-			}
-			foreach my $srcLine (@srcLines) {print DST $srcLine;}
-			close DST;
-		}
-	}
-}
-
-exit $totalErrorLevel;
-
-#=======================================================================
-#PARSE_ARGUMENTS
-#=======================================================================
-#function checks usage, and parses command line arguments.
-sub parse_arguments
-{
-    for (my $i=0;$i<=$#ARGV;$i++)
-    {
-        if (defined $args{$ARGV[$i]})
-        {
-            $args{$ARGV[$i]}=$ARGV[$i+1];
-            $i++;
-        }
-        else
-        {
-            die "Unknown Switch: $ARGV[$i]\n"; 
-        }   
-    }
-    die "\nUSAGE: $PROGRAM_NAME -i <input folder> -d <output_folder> -c <csv file> -t <type of file to replace>\n"
-    unless (!($args{$srcKey} eq 'none' || $args{$destKey} eq 'none' || $args{$csvKey} eq 'none'));
-}
-