diff options
Diffstat (limited to 'usr/src/cmd/acpi/iasl/prutils.c')
| -rw-r--r-- | usr/src/cmd/acpi/iasl/prutils.c | 476 |
1 files changed, 476 insertions, 0 deletions
diff --git a/usr/src/cmd/acpi/iasl/prutils.c b/usr/src/cmd/acpi/iasl/prutils.c new file mode 100644 index 0000000000..ec9bf6664f --- /dev/null +++ b/usr/src/cmd/acpi/iasl/prutils.c @@ -0,0 +1,476 @@ +/****************************************************************************** + * + * Module Name: prutils - Preprocessor utilities + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2016, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include "aslcompiler.h" +#include "dtcompiler.h" + + +#define _COMPONENT ASL_PREPROCESSOR + ACPI_MODULE_NAME ("prutils") + + +/****************************************************************************** + * + * FUNCTION: PrGetNextToken + * + * PARAMETERS: Buffer - Current line buffer + * MatchString - String with valid token delimiters + * Next - Set to next possible token in buffer + * + * RETURN: Next token (null-terminated). Modifies the input line. + * Remainder of line is stored in *Next. + * + * DESCRIPTION: Local implementation of strtok() with local storage for the + * next pointer. Not only thread-safe, but allows multiple + * parsing of substrings such as expressions. + * + *****************************************************************************/ + +char * +PrGetNextToken ( + char *Buffer, + char *MatchString, + char **Next) +{ + char *TokenStart; + + + if (!Buffer) + { + /* Use Next if it is valid */ + + Buffer = *Next; + if (!(*Next)) + { + return (NULL); + } + } + + /* Skip any leading delimiters */ + + while (*Buffer) + { + if (strchr (MatchString, *Buffer)) + { + Buffer++; + } + else + { + break; + } + } + + /* Anything left on the line? */ + + if (!(*Buffer)) + { + *Next = NULL; + return (NULL); + } + + TokenStart = Buffer; + + /* Find the end of this token */ + + while (*Buffer) + { + if (strchr (MatchString, *Buffer)) + { + *Buffer = 0; + *Next = Buffer+1; + if (!**Next) + { + *Next = NULL; + } + + return (TokenStart); + } + + Buffer++; + } + + *Next = NULL; + return (TokenStart); +} + + +/******************************************************************************* + * + * FUNCTION: PrError + * + * PARAMETERS: Level - Seriousness (Warning/error, etc.) + * MessageId - Index into global message buffer + * Column - Column in current line + * + * RETURN: None + * + * DESCRIPTION: Preprocessor error reporting. Front end to AslCommonError2 + * + ******************************************************************************/ + +void +PrError ( + UINT8 Level, + UINT16 MessageId, + UINT32 Column) +{ +#if 0 + AcpiOsPrintf ("%s (%u) : %s", Gbl_Files[ASL_FILE_INPUT].Filename, + Gbl_CurrentLineNumber, Gbl_CurrentLineBuffer); +#endif + + + if (Column > 120) + { + Column = 0; + } + + /* TBD: Need Logical line number? */ + + AslCommonError2 (Level, MessageId, + Gbl_CurrentLineNumber, Column, + Gbl_CurrentLineBuffer, + Gbl_Files[ASL_FILE_INPUT].Filename, "Preprocessor"); + + Gbl_PreprocessorError = TRUE; +} + + +/******************************************************************************* + * + * FUNCTION: PrReplaceData + * + * PARAMETERS: Buffer - Original(target) buffer pointer + * LengthToRemove - Length to be removed from target buffer + * BufferToAdd - Data to be inserted into target buffer + * LengthToAdd - Length of BufferToAdd + * + * RETURN: None + * + * DESCRIPTION: Generic buffer data replacement. + * + ******************************************************************************/ + +void +PrReplaceData ( + char *Buffer, + UINT32 LengthToRemove, + char *BufferToAdd, + UINT32 LengthToAdd) +{ + UINT32 BufferLength; + + + /* Buffer is a string, so the length must include the terminating zero */ + + BufferLength = strlen (Buffer) + 1; + + if (LengthToRemove != LengthToAdd) + { + /* + * Move some of the existing data + * 1) If adding more bytes than removing, make room for the new data + * 2) if removing more bytes than adding, delete the extra space + */ + if (LengthToRemove > 0) + { + memmove ((Buffer + LengthToAdd), (Buffer + LengthToRemove), + (BufferLength - LengthToRemove)); + } + } + + /* Now we can move in the new data */ + + if (LengthToAdd > 0) + { + memmove (Buffer, BufferToAdd, LengthToAdd); + } +} + + +/******************************************************************************* + * + * FUNCTION: PrOpenIncludeFile + * + * PARAMETERS: Filename - Filename or pathname for include file + * + * RETURN: None. + * + * DESCRIPTION: Open an include file and push it on the input file stack. + * + ******************************************************************************/ + +FILE * +PrOpenIncludeFile ( + char *Filename, + char *OpenMode, + char **FullPathname) +{ + FILE *IncludeFile; + ASL_INCLUDE_DIR *NextDir; + + + /* Start the actual include file on the next line */ + + Gbl_CurrentLineOffset++; + + /* Attempt to open the include file */ + /* If the file specifies an absolute path, just open it */ + + if ((Filename[0] == '/') || + (Filename[0] == '\\') || + (Filename[1] == ':')) + { + IncludeFile = PrOpenIncludeWithPrefix ( + "", Filename, OpenMode, FullPathname); + if (!IncludeFile) + { + goto ErrorExit; + } + return (IncludeFile); + } + + /* + * The include filename is not an absolute path. + * + * First, search for the file within the "local" directory -- meaning + * the same directory that contains the source file. + * + * Construct the file pathname from the global directory name. + */ + IncludeFile = PrOpenIncludeWithPrefix ( + Gbl_DirectoryPath, Filename, OpenMode, FullPathname); + if (IncludeFile) + { + return (IncludeFile); + } + + /* + * Second, search for the file within the (possibly multiple) + * directories specified by the -I option on the command line. + */ + NextDir = Gbl_IncludeDirList; + while (NextDir) + { + IncludeFile = PrOpenIncludeWithPrefix ( + NextDir->Dir, Filename, OpenMode, FullPathname); + if (IncludeFile) + { + return (IncludeFile); + } + + NextDir = NextDir->Next; + } + + /* We could not open the include file after trying very hard */ + +ErrorExit: + sprintf (Gbl_MainTokenBuffer, "%s, %s", Filename, strerror (errno)); + PrError (ASL_ERROR, ASL_MSG_INCLUDE_FILE_OPEN, 0); + return (NULL); +} + + +/******************************************************************************* + * + * FUNCTION: FlOpenIncludeWithPrefix + * + * PARAMETERS: PrefixDir - Prefix directory pathname. Can be a zero + * length string. + * Filename - The include filename from the source ASL. + * + * RETURN: Valid file descriptor if successful. Null otherwise. + * + * DESCRIPTION: Open an include file and push it on the input file stack. + * + ******************************************************************************/ + +FILE * +PrOpenIncludeWithPrefix ( + char *PrefixDir, + char *Filename, + char *OpenMode, + char **FullPathname) +{ + FILE *IncludeFile; + char *Pathname; + + + /* Build the full pathname to the file */ + + Pathname = FlMergePathnames (PrefixDir, Filename); + + DbgPrint (ASL_PARSE_OUTPUT, PR_PREFIX_ID + "Include: Opening file - \"%s\"\n", + Gbl_CurrentLineNumber, Pathname); + + /* Attempt to open the file, push if successful */ + + IncludeFile = fopen (Pathname, OpenMode); + if (!IncludeFile) + { + fprintf (stderr, "Could not open include file %s\n", Pathname); + return (NULL); + } + + /* Push the include file on the open input file stack */ + + PrPushInputFileStack (IncludeFile, Pathname); + *FullPathname = Pathname; + return (IncludeFile); +} + + +/******************************************************************************* + * + * FUNCTION: AslPushInputFileStack + * + * PARAMETERS: InputFile - Open file pointer + * Filename - Name of the file + * + * RETURN: None + * + * DESCRIPTION: Push the InputFile onto the file stack, and point the parser + * to this file. Called when an include file is successfully + * opened. + * + ******************************************************************************/ + +void +PrPushInputFileStack ( + FILE *InputFile, + char *Filename) +{ + PR_FILE_NODE *Fnode; + + + Gbl_HasIncludeFiles = TRUE; + + /* Save the current state in an Fnode */ + + Fnode = UtLocalCalloc (sizeof (PR_FILE_NODE)); + + Fnode->File = Gbl_Files[ASL_FILE_INPUT].Handle; + Fnode->Next = Gbl_InputFileList; + Fnode->Filename = Gbl_Files[ASL_FILE_INPUT].Filename; + Fnode->CurrentLineNumber = Gbl_CurrentLineNumber; + + /* Push it on the stack */ + + Gbl_InputFileList = Fnode; + + DbgPrint (ASL_PARSE_OUTPUT, PR_PREFIX_ID + "Push InputFile Stack: handle %p\n\n", + Gbl_CurrentLineNumber, InputFile); + + /* Reset the global line count and filename */ + + Gbl_Files[ASL_FILE_INPUT].Filename = + UtStringCacheCalloc (strlen (Filename) + 1); + strcpy (Gbl_Files[ASL_FILE_INPUT].Filename, Filename); + + Gbl_Files[ASL_FILE_INPUT].Handle = InputFile; + Gbl_CurrentLineNumber = 1; + + /* Emit a new #line directive for the include file */ + + FlPrintFile (ASL_FILE_PREPROCESSOR, "#line %u \"%s\"\n", 1, Filename); +} + + +/******************************************************************************* + * + * FUNCTION: AslPopInputFileStack + * + * PARAMETERS: None + * + * RETURN: 0 if a node was popped, -1 otherwise + * + * DESCRIPTION: Pop the top of the input file stack and point the parser to + * the saved parse buffer contained in the fnode. Also, set the + * global line counters to the saved values. This function is + * called when an include file reaches EOF. + * + ******************************************************************************/ + +BOOLEAN +PrPopInputFileStack ( + void) +{ + PR_FILE_NODE *Fnode; + + + Fnode = Gbl_InputFileList; + DbgPrint (ASL_PARSE_OUTPUT, "\n" PR_PREFIX_ID + "Pop InputFile Stack, Fnode %p\n\n", + Gbl_CurrentLineNumber, Fnode); + + if (!Fnode) + { + return (FALSE); + } + + /* Close the current include file */ + + fclose (Gbl_Files[ASL_FILE_INPUT].Handle); + + /* Update the top-of-stack */ + + Gbl_InputFileList = Fnode->Next; + + /* Reset global line counter and filename */ + + Gbl_Files[ASL_FILE_INPUT].Filename = Fnode->Filename; + Gbl_Files[ASL_FILE_INPUT].Handle = Fnode->File; + Gbl_CurrentLineNumber = Fnode->CurrentLineNumber; + + /* Emit a new #line directive after the include file */ + + FlPrintFile (ASL_FILE_PREPROCESSOR, "#line %u \"%s\"\n", + Gbl_CurrentLineNumber, Fnode->Filename); + + /* All done with this node */ + + ACPI_FREE (Fnode); + return (TRUE); +} |