diff options
Diffstat (limited to 'usr/src/cmd/fm/dicts/NIC.po')
| -rw-r--r-- | usr/src/cmd/fm/dicts/NIC.po | 98 |
1 files changed, 98 insertions, 0 deletions
diff --git a/usr/src/cmd/fm/dicts/NIC.po b/usr/src/cmd/fm/dicts/NIC.po new file mode 100644 index 0000000000..46f1c859b9 --- /dev/null +++ b/usr/src/cmd/fm/dicts/NIC.po @@ -0,0 +1,98 @@ +# +# Copyright 2020 the University of Queensland +# Use is subject to license terms. +# +# This file and its contents are supplied under the terms of the +# Common Development and Distribution License ("CDDL"), version 1.0. +# You may only use this file in accordance with the terms of version +# 1.0 of the CDDL. +# +# A full copy of the text of the CDDL should have accompanied this +# source. A copy of the CDDL is also available via the Internet at +# http://www.illumos.org/license/CDDL. +# + +# +# code: NIC-8000-0Q +# keys: fault.io.nic.transceiver.notsupp +# +msgid "NIC-8000-0Q.type" +msgstr "Fault" +msgid "NIC-8000-0Q.severity" +msgstr "Critical" +msgid "NIC-8000-0Q.description" +msgstr "NIC transceiver module %<fault-list[0].resource.hc-specific.txr_index> (SFP/SFP+/QSFP+ etc.) in %<fault-list[0].resource.hc-specific.link-name> is of a type that is not supported. This may be due to an incompatible link type or speed. In some NICs, this may also be caused by enforcement of a vendor or part whitelist.\n\n NIC data link: %<fault-list[0].resource.hc-specific.link-name> (%<fault-list[0].resource.hc-specific.primary-mac-address>)\n Module vendor: %<fault-list[0].resource.hc-specific.vendor>\n Module part: %<fault-list[0].resource.part>\n Module serial: %<fault-list[0].resource.serial>\n\n Refer to %s for more information." +msgid "NIC-8000-0Q.response" +msgstr "The transceiver module has been disabled, and the network data link associated with it (%<fault-list[0].resource.hc-specific.link-name>) has been marked as down.\n" +msgid "NIC-8000-0Q.impact" +msgstr "No network traffic will pass through the data link or network interfaces associated with this transceiver slot.\n" +msgid "NIC-8000-0Q.action" +msgstr "Replace the transceiver module with one of a supported type.\n" + +# +# code: NIC-8000-1C +# keys: fault.io.nic.transceiver.whitelist +# +msgid "NIC-8000-1C.type" +msgstr "Fault" +msgid "NIC-8000-1C.severity" +msgstr "Critical" +msgid "NIC-8000-1C.description" +msgstr "NIC transceiver module %<fault-list[0].resource.hc-specific.txr_index> (SFP/SFP+/QSFP+ etc.) in %<fault-list[0].resource.hc-specific.link-name> is of a type that is not allowed to be used with this NIC (due to a hardware-enforced vendor or part whitelist).\n\n NIC data link: %<fault-list[0].resource.hc-specific.link-name> (%<fault-list[0].resource.hc-specific.primary-mac-address>)\n Module vendor: %<fault-list[0].resource.hc-specific.vendor>\n Module part: %<fault-list[0].resource.part>\n Module serial: %<fault-list[0].resource.serial>\n\n Refer to %s for more information." +msgid "NIC-8000-1C.response" +msgstr "The transceiver module has been disabled, and the network data link associated with it (%<fault-list[0].resource.hc-specific.link-name>) has been marked as down.\n" +msgid "NIC-8000-1C.impact" +msgstr "No network traffic will pass through the data link or network\ninterfaces associated with this transceiver slot.\n" +msgid "NIC-8000-1C.action" +msgstr "Replace the transceiver module with one of a supported type.\n" + +# +# code: NIC-8000-2R +# keys: fault.io.nic.transceiver.overtemp +# +msgid "NIC-8000-2R.type" +msgstr "Fault" +msgid "NIC-8000-2R.severity" +msgstr "Critical" +msgid "NIC-8000-2R.description" +msgstr "NIC transceiver module %<fault-list[0].resource.hc-specific.txr_index> (SFP/SFP+/QSFP+ etc.) in %<fault-list[0].resource.hc-specific.link-name> has overheated.\n\n NIC data link: %<fault-list[0].resource.hc-specific.link-name> (%<fault-list[0].resource.hc-specific.primary-mac-address>)\n Module vendor: %<fault-list[0].resource.hc-specific.vendor>\n Module part: %<fault-list[0].resource.part>\n Module serial: %<fault-list[0].resource.serial>\n\n Refer to %s for more information." +msgid "NIC-8000-2R.response" +msgstr "The transceiver module has been disabled, and the network data link associated with it (%<fault-list[0].resource.hc-specific.link-name>) has been marked as down.\n" +msgid "NIC-8000-2R.impact" +msgstr "No network traffic will pass through the data link or network interfaces associated with this transceiver slot.\n" +msgid "NIC-8000-2R.action" +msgstr "Remove the transceiver module and check for adequate ventilation\nand cooling. Re-inserting the module after it has cooled will restore service.\n" + +# +# code: NIC-8000-34 +# keys: fault.io.nic.transceiver.hwfail +# +msgid "NIC-8000-34.type" +msgstr "Fault" +msgid "NIC-8000-34.severity" +msgstr "Critical" +msgid "NIC-8000-34.description" +msgstr "NIC transceiver module %<fault-list[0].resource.hc-specific.txr_index> (SFP/SFP+/QSFP+ etc.) in %<fault-list[0].resource.hc-specific.link-name> has experienced a hardware failure.\n\n NIC data link: %<fault-list[0].resource.hc-specific.link-name> (%<fault-list[0].resource.hc-specific.primary-mac-address>)\n Module vendor: %<fault-list[0].resource.hc-specific.vendor>\n Module part: %<fault-list[0].resource.part>\n Module serial: %<fault-list[0].resource.serial>\n\n Refer to %s for more information." +msgid "NIC-8000-34.response" +msgstr "The transceiver module has been disabled, and the network data link associated with it (%<fault-list[0].resource.hc-specific.link-name>) has been marked as down.\n" +msgid "NIC-8000-34.impact" +msgstr "No network traffic will pass through the data link or network\ninterfaces associated with this transceiver slot.\n" +msgid "NIC-8000-34.action" +msgstr "Remove and check the transceiver module, and consider replacing it.\n" + +# +# code: NIC-8000-4X +# keys: fault.io.nic.transceiver.unknown +# +msgid "NIC-8000-4X.type" +msgstr "Fault" +msgid "NIC-8000-4X.severity" +msgstr "Critical" +msgid "NIC-8000-4X.description" +msgstr "The slot for NIC transceiver module %<fault-list[0].resource.hc-specific.txr_index> (SFP/SFP+/QSFP+ etc.) in %<fault-list[0].resource.hc-specific.link-name> is occupied, but hardware did not find a valid transceiver in it.\n Refer to %s for more information." +msgid "NIC-8000-4X.response" +msgstr "The transceiver module slot has been disabled, and the network data link associated with it (%<fault-list[0].resource.hc-specific.link-name>) has been marked as down.\n" +msgid "NIC-8000-4X.impact" +msgstr "No network traffic will pass through the data link or network\ninterfaces associated with this transceiver slot.\n" +msgid "NIC-8000-4X.action" +msgstr "Remove and check the transceiver module. It may be faulty,\ninserted incorrectly, or not of the correct type for the slot.\nIf problems persist, consider replacing the module.\n" |