diff options
Diffstat (limited to 'usr/src/cmd/terminfo/misc.ti')
| -rw-r--r-- | usr/src/cmd/terminfo/misc.ti | 780 |
1 files changed, 0 insertions, 780 deletions
diff --git a/usr/src/cmd/terminfo/misc.ti b/usr/src/cmd/terminfo/misc.ti deleted file mode 100644 index 8b30afc5bd..0000000000 --- a/usr/src/cmd/terminfo/misc.ti +++ /dev/null @@ -1,780 +0,0 @@ -# -# CDDL HEADER START -# -# The contents of this file are subject to the terms of the -# Common Development and Distribution License, Version 1.0 only -# (the "License"). You may not use this file except in compliance -# with the License. -# -# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE -# or http://www.opensolaris.org/os/licensing. -# See the License for the specific language governing permissions -# and limitations under the License. -# -# When distributing Covered Code, include this CDDL HEADER in each -# file and include the License file at usr/src/OPENSOLARIS.LICENSE. -# If applicable, add the following below this CDDL HEADER, with the -# fields enclosed by brackets "[]" replaced with your own identifying -# information: Portions Copyright [yyyy] [name of copyright owner] -# -# CDDL HEADER END -# -# -# Copyright 1996 Sun Microsystems, Inc. All rights reserved. -# Use is subject to license terms. -# - -# Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T -# All Rights Reserved - -#ident "%Z%%M% %I% %E% SMI" -# # -------------------------------- -# -# misc: MISCELLANEOUS TERMINALS -# -# Manufacturer: MISCELLANEOUS TERMINALS -# Class: III -# -# Info: -# This file is for manufacturers with only a few terminals. -# They are included alphabetically by manufacturer. Hard copy -# terminals, personal computers, special "made up" terminals -# and homemade terminals go in separate files. -# -aed512|aed|AED 512, - cr=^M, cud1=^J, bel=^G, - cols#64, lines#40, clear=^L, - cub1=^H, cuf1=\Ei0800\001, - cnorm=\E\072004=000200??\001, - flash=\EK0001??0000K0001202080\001, - smso=\E\07200>8000140[80C00\001, rmso=\E[00C80\001, - smul=\E\07200>8000140\001, rmul=\E\07200>8000100\001, - uc=\Ei???>l0800i0102\001, - smcup=\E\07200>8000140{<04<0??00001010L<0\072004=0002??00\001, - rmcup=\E\07200>8000100{804<0??00001000L80\072004=000200??\001, - ind=\E;1100\072004=000200??;1300\047\200\001\n\E\072004=0002??00;1200\001\n, - cuu1=^K, .cup=\E;1300%p1%c%p2%c\001, -ampex|d80|dialogue|dialogue80|ampex dialogue 80, - tbc=\E3, hts=\E1, cr=^M, cud1=^J, ind=^J, bel=^G, - is2=\EA, ul, smul=\El, rmul=\Em, - am, bw, cub1=^H, ht=^I, clear=\E*$<75>, cup=\E=%p1%' '%+%c%p2%' '%+%c, - il1=\EE$<5*>, cbt=\EI, ich1=\EQ, dl1=\ER$<5*>, dch1=\EW, - el=\Et, ed=\Ey, smso=\Ej, rmso=\Ek, lines#24, cols#80, cuf1=^L, cuu1=^K, -# Info: -# Tue Aug 9 20:11:37 1983 -# No backspace key in the main QWERTY cluster. Fortunately, -# it has a NEWLINE/PAGE key just above RETURN that sends a strange -# single-character code. Given a suitable Unix (one that lets you -# set an echo-erase-as-BS-SP-BS mode), this key can be used as -# the erase key; I find I like this. Because some people and -# some systems may not, there is another termcap ("ax175e") that -# suppresses this little eccentricity by omitting the relevant -# capability. -# -# Problems: -# - I haven't done tab-setting yet. -# - The initialization sequence doesn't use the terminal's -# reset-everything code because it would require a delay -# in the middle of the is sequence. -# -ampex175|ampex d175, - cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EE, am, cub1=^H, - ed=\Ey, el=\Et, clear=\E+, cup=\E=%p1%' '%+%c%p2%' '%+%c, - cols#80, dch1=\EW, dl1=\ER, - home=\036, ich1=\EQ, is2=\EX\EA\EF, - kcud1=^J, khome=\036, kcub1=^H, kcuf1=^L, - kcuu1=^K, kil1=\EE, kdl1=\ER, kich1=\EQ, kdch1=\EW, - lines#24, ll=\036^K, cuf1=^L, - rmso=\Ek, smso=\Ej, rmcup=\EF, smcup=\EN, rmul=\Em, cuu1=^K, - smul=\El, -ampex175-b|ampex d175 using left arrow for erase, - kbs=^_, use=ampex175, -# Info: -# Below are the termcap entries I've been using. The problem -# with scrolling in vi can only be fixed by getting BBN to put -# smarter scroll logic in the terminal or changing vi or padding -# scrolls with about 500 ms delay. -# -# I always thought the problem was related to the terminal -# counting newlines in its input buffer before scrolling and -# then moving the screen that much. Then vi comes along and -# paints lines in on the bottom line of the screen, so you get -# this big white gap. -# -# We have not had sufficient demand for vi (most use emacs or -# rand) here to fix this problem. -# -# [Sounds like the BitGraph should stop looking ahead when it -# sees escape - ] -# -bitgraph|bbn bitgraph, - use=bg3.10rv, -bg3.10rv|bgrv|bbn bitgraph (reverse video), - use=bg2.0rv, -bg3.10nv|bgnv|bbn bitgraph (normal video), - use=bg2.0nv, -bg3.10|bgn|bbn bitgraph (no init), - use=bg2.0, -bg2.0rv|bbn bitgraph (reverse video), - is2=\E>\E[?5h\E[?7h, flash=\E[?5l\E[?5h, use=bg2.0, -bg2.0nv|bbn bitgraph (normal video), - is2=\E>\E[?5l\E[?7h, flash=\E[?5h\E[?5l, use=bg2.0, -bg2.0|bbn bitgraph (no init), - cr=^M, cud1=^J, bel=^G, - il1=\E[L$<2*>, cub1=^H, ed=\E[J$<150>, el=\E[K$<2>, - clear=\E[H\E[J$<150>, cup=%i\E[%p1%d;%p2%dH, cols#85, csr=\E[%i%p1%d;%p2%dr, - dl1=\E[M$<2*>, cud1=\E[B, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, - kcud1=\E[B, rmkx=\E>, kcub1=\E[D, kcuf1=\E[C, smkx=\E=, - kcuu1=\E[A, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, lines#64, - cuf1=\E[C, ht=^I, rc=\E8, sc=\E7, rmso=\E[0m, ind=\n$<280>, - smso=\E[7m, cuu1=\E[A, xenl, -bg1.25rv|bbn bitgraph (reverse video), - flash=\E[?5l\E[?5h, is2=\E>\E[?5h\E[?7h, use=bg1.25, -bg1.25nv|bbn bitgraph (normal video), - is2=\E>\E[?5l\E[?7h, flash=\E[?5h\E[?5l, use=bg1.25, -bg1.25|bbn bitgraph, - cr=^M, cud1=^J, bel=^G, il1=\E[L$<2*>, cub1=^H, - ed=\E[J$<150>, el=\E[K$<2>, clear=\E[H\E[J$<150>, cup=%i\E[%p1%d;%p2%dH, - cols#85, dl1=\E[M$<2*>, cud1=\E[B, kf1=\EP, kf2=\EQ, kf3=\ER, - kf4=\ES, kcud1=\EB, rmkx=\E>, kcub1=\ED, kcuf1=\EC, smkx=\E=, - kcuu1=\EA, lines#64, ll=\E[64;1H, lf1=PF1, lf2=PF2, lf3=PF3, - lf4=PF4, cuf1=\E[C, ht=^I, rmso=\E[0m, ind=\n$<280>, - smso=\E[7m, cuu1=\E[A, -ca22851|computer automation 22851, - cr=^M, cud1=^J, ind=^J, bel=^G, cup=\02%i%p1%c%p2%c, cols#80, - lines#24, clear=^L$<8>, am, cub1=\025, cuu1=\026, home=\036, - el=\035, ed=\034, cuf1=\011, kcub1=\025, kcuu1=\026, - kcud1=\027, khome=\036, -# Info: -# CHROMATICS -# Following is revised version. As I mentioned, I recompiled -# curses in order to accomadate the large amount of definition. -# I have put the long strings in ti/te. Ti sets up a window -# that is smaller than the screen, and puts up a warning message -# outside the window. Te erases the warning message, puts the -# window back to be the whole screen, and puts the cursor at just -# below the small window. A defined vs and ve to really turn -# the cursor on and off, but I have taken this out since I don't -# like the cursor being turned off when vi exits. -# -cg7900|chromatics|chromatics 7900, - cr=^M, cud1=^J, ind=^J, bel=^G, cols#80, lines#40, am, - clear=^L, cub1=^H, cup=^AM%p2%d\,%p1%d\,, cuf1=\035, cuu1=^K, - home=\034, ll=^A|, el=^A`, ed=^Al, il1=^A>2, dl1=^A<2, - ich1=^A>1, dch1=^A<1, - smso=^AC4\,^Ac7\,, rmso=^AC1\,^Ac2\,, uc=^A^A_^A\0, - smcup=^AP0^AO1^AR1^AC4\,^Ac0\,^L^AM0\,42\,WARNING DOUBLE ENTER ESCAPE and ^U^AC1\,^Ac2\,^AW0\,0\,79\,39\,, - rmcup=^AW0\,40\,85\,48\,^L^AW0\,0\,85\,48\,^AM0\,40\,, -cops10|cops|cops-10|, - cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, bw, ed=^w, el=^v, - clear=30^x, cup=^p%p1%' '%+%c%p2%' '%+%c, cols#80, cud1=\n, kbs=^h, kcud1=\n, - khome=^y, kcub1=^h, kcuf1=^l, kcuu1=^k, lines#24, cuf1=^l, - cuu1=^k, -# Info: -# CYBERNEX -# We recently discovered (it wasn't clearly documented) that the -# Cybernex XL-83 terminal has a reverse-scroll capability; I -# enclose a revised termcap entry with "sr" added. -# -xl83|cybernex XL-83, - cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, ed=^P$<62>, el=^O$<3>, - clear=^L$<62>, cup=^W%p1%' '%+%c%p2%' '%+%c, cols#80, home=^K, - kcud1=^J, kcub1=^H, kcuf1=^I, kcuu1=^N, - lines#24, cuu1=^N, cuf1=^I, ri=^N, -mdl110|cybernex mdl-110, - cup=^P%p1%' '%+%c%p2%' '%+%c, cols#80, lines#24, am, clear=^X$<70>, - cub1=^H, cr=^M, cud1=^J, ind=^J, bel=^G, cuf1=^U, cuu1=^Z, home=^Y, - el=^N@^V$<145>, ed=^NA^W$<145>, il1=^NA^N^]$<65>, dl1=^NA^N^^$<40>, - ich1=^NA^]$<3.5>, dch1=^NA^^$<3.5>, smso=^NF, rmso=^NG, - ht=\t$<43>, ed=^N@^V$<6>, -# Info: -# DATA GENERAL -# -# It has one or two quirks, though; in vi you have to use <cr> to -# advance to the next line instead of just hitting the big NEWLINE -# key (which is cursor down to vi). -# -# One pain with using the dasher on unix though is the fact -# that they use # ^H for home cursor. This causes problems with -# reading news and help files on the system that assume ^H is -# backspace. -# -# The trouble with this terminal is that you can't give it a -# linefeed without having it add a carriage return. And there -# isn't any switch that will turn off auto carriage return -# on receipt of linefeed. -# -# Is there any way around this? [I used cud1=^Z to try to -# describe this -] -# -d200|d100|data general dasher 200, - am, bel=^G, bw, clear=^L, cols#80, cr=^M, - cub1=^Y, cud1=^Z, cuf1=^X, cup=^P%p2%c%p1%c, cuu1=^W, - el=^K, home=^H, ind=^J, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, - kf0=^^z, kf1=^^q, kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, - kf8=^^x, kf9=^^y, khome=^H, lf0=f10, - lines#24, nel=^J, rmso=^^E, rmul=^U, smso=^^D, smul=^T, -dg|dg6053|data general 6053, - cr=^M, cud1=^J, ind=^J, bel=^G, - am, cub1=^H, cup=^P%p2%c%p1%c, clear=^L, home=^H, cuf1=^S, - cuu1=^W, el=^K, cols#80, lines#24, -d132|datagraphix|datagraphix 132a, - cr=^M, cud1=^J, ind=^J, bel=^G, - cols#80, lines#30, clear=^l, home=\Et, da, db, ind=\Ev, ri=\Ew, - cuu1=\Ek, cuf1=\El, cvvis=\Ex, cnorm=\Em\En, - il1=\E3, ich1=\E5, dch1=\E6, in, ich1=\E5, -# Info: -# DATAPOINT (see also pc) -# -datapoint|dp3|dp3360|datapoint 3360, - cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, - ed=^_, el=^^, clear=^]^_, cols#82, home=^], lines#25, cuf1=^x, cuu1=^z, -# Info: -# DELTA DATA -# This is untested. The cup sequence is hairy enough that it -# probably needs work. The idea is ctrl(O), dd(row), dd(col), -# where dd(x) is x - 2*(x%16) + '9' -# -delta|dd5000|delta data 5000, - cud1=^J, ind=^J, bel=^G, am, cub1=^H, clear=^NR, - cup=^O%p1%p1%{16}%m%{2}%*%-%'9'%+%c%p2%p2%{16}%m%{2}%*%-%'9'%+%c, - cols#80, lines#27, home=^NQ, cuf1=^Y, cuu1=^Z, el=^NU, dch1=^NV, -digilog|333|digilog 333, - cub1=^H, cols#80, el=\030, home=^n, lines#16, cuf1=^i, cuu1=^o, - cr=^M, cud1=^J, ind=^J, bel=^G, -# Info: -# DIRECT -# I think the direct is supposed to be vt100 compatible, so all -# this should probably be replaced by a use=vt100, but I can't -# test it. -# -d800|direct|direct800|direct 800/a, - cr=^M, cud1=^J, ind=^J, bel=^G, cols#80, lines#24, am, - clear=\E[1;1H\E[2J, cub1=^H, cup=\E[%i%p1%d;%p2%dH, - cuf1=\E[C, cuu1=\E[A, el=\E[K, ed=\E[J, smso=\E[7m, rmso=\E[0m, - smul=\E[4m, rmul=\E[0m, xhp, cvvis=\E[>12l, cnorm=\E[>12h, - ind=\ED, ri=\EM, da, db, smacs=\E[1m, rmacs=\E[0m, msgr, ht=^I, - kcub1=\E[D, kcuf1=\E[C, kcuu1=\E[A, kcud1=\E[B, - kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, - kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, -env230|envision230|envision 230 graphics terminal, - am, mir, msgr, xon, - cols#80, it#8, lines#24, vt#3, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, - clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr, - cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\n, - cuf=\E[%p1%dC, cuf1=\E[C$<2>, - cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, - cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, - el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=\t, - hts=\EH, ind=\n, ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=\b, - kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB, - kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kf0=\EOy, kf1=\EOP, - kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt, - kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, mc0=\E[0i, - mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m$<2>, - ri=\EM$<5>, rmacs=^O, rmkx=\E[?1l\E>, rmso=\E[0m<2>, - rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, - sc=\E7, - sgr=\E[%?%p1%t;1%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, - sgr0=\E[m^O$<2>, smacs=^N, smkx=\E[?1h\E=, smso=\E[1m<2>, - smul=\E[4m$<2>, tbc=\E[3g, -falco|ts1|ts-1|falco ts-1, - cr=^M, cud1=^J, ind=^J, bel=^G, cols#80, lines#24, ht=^I, - is2=\Eu\E3, il1=\EE, am, el=\ET\EG0^H, cup=\E=%p1%' '%+%c%p2%' '%+%c, - clear=\E*, ed=\EY, dch1=\EW, cub1=^H, dl1=\ER, rmir=\Er, smir=\Eq, - home=^^, kf0=^A0\r, kcud1=^J, kcub1=^H, kcuf1=^L, kcuu1=^K, cuf1=^L, - rmso=\Eg0, smso=\Eg1, cuu1=^K, smul=\Eg1, rmul=\Eg0, -# Info: -# For falcos with the paging option (very nice it turns out - -# they can store several hundred lines of text, as well as have -# a separate screen for vi and other such programs usage)... -# -falco-p|falco-tsl-1sp|falco with paging option, - cr=^M, cud1=^J, ind=^J, bel=^G, is2=\EZ\E3\E_c, il1=\EE, am, - cub1=^H, el=\ET\EG0^H\Eg0, clear=\E*, ed=\EY, cols#80, - dch1=\EW, dl1=\ER, kcud1=\E[B, kcub1=\E[D, rmir=\Er, smir=\Eq, - ht=^I, db, kcuf1=\E[C, kcuu1=\E[A, lines#24, cuf1=\E[C, - rmso=\Eg0, smso=\Eg4, cuu1=\E[A, smul=\Eg1, smcup=\E_d, - rmcup=\E_b, rmul=\Eg0, cud1=\E[B, cup=\E=%p1%' '%+%c%p2%' '%+%c, - msgr, ul, khome=\E[H, da, mir, cbt=\EI, -ts100|ts100-sp|falco ts100-sp, - am, mir, msgr, xenl, xon, - cols#80, it#8, lines#24, vt#3, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, - clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr, - cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\n, - cuf=\E[%p1%dC, cuf1=\E[C$<2>, - cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, - cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>, - el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, - ht=\t, hts=\EH, ich1=\E~Q, il1=\E~E, ind=\n, - is1=\E~)\E~ea, ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=\b, - kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB, - kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kf0=\EOy, kf1=\EOP, - kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt, - kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, rc=\E8, - rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmkx=\E[?1l\E>, - rmso=\E[m$<2>, rmul=\E[m$<2>, - rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, - sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t^N%e^O%;, - sgr0=\E[m^O$<2>, smacs=^N, smkx=\E[?1h\E=, - smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, -ts100-ctxt|falco ts-100 saving context, - smcup=\E~_d\E[2J, rmcup=\E~_b, use=ts100, -# Info: -# FLUKE -# The 1720a differences from ANSI: no auto margin, destructive -# tabs, # of lines, funny highlighting and underlining -# -f1720|f1720a|fluke 1720A, - cr=^M, ind=^J, cud1=^J, bel=^G, - is2=\E[;H\E[2J, cols#80, lines#16, - cuu1=\E[A, cud1=\E[B, cuf1=\E[C, cub1=^H, cup=\E[%i%p1%d;%p2%dH, - ind=\ED, ri=\EM, - kcuu1=\034, kcud1=\035, kcuf1=\036, kcub1=\037, - smso=\E[7m, rmso=\E[m, xmc#1, - smul=\E[4m, rmul=\E[m, - el=\E[K, ed=\E[J, - xt, clear=\E[;H\E[2J, -# Info: -# INTERTEC -# Intertec: I can't tell if these are the same terminal or not. -# the cup entries are different. The it2 looks suspiciously -# like an an Adds Regent 100, complete with the bug [mrh]. -# -it|intertube|intertec|Intertec InterTube, - cr=^M, ind=^J, cud1=^J, bel=^G, cub1=^H, am, - clear=^L, home=^A, cuu1=^Z, cuf1=^F, - cup=\EY%p1%' '%+%c%p2%' '%+%c$<50>, - smso=\E0P, rmso=\E0@, cols#80, lines#25, -# Info: -# The intertube 2 has the "full duplex" problem like the tek -# 4025: if you are typing and a command comes in, the keystrokes -# you type get interspersed with the command and it messes up. -# -it2|intertube2|intertec data systems intertube 2, - cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, - clear=^L, cols#80, home=^A, lines#25, cuu1=^Z, el=\EK, - hpa=^P%p1%{10}%/%{16}%*%p1%{10}%m%+%c, vpa=^K%p1%c, - cup=^N%p1%c^P%p2%{10}%/%{16}%*%p2%{10}%m%+%c, - cuf1=^F, cud1=\n, ll=^K^X\r, smso=\E0P, rmso=\E0@, -superbrain|intertec superbrain, - cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, ed=\E~k<10*>, - el=\E~K$<15>, bw, clear=\f$<5*>, - cup=\EY%p1%' '%+%c%p2%' '%+%c$<20>, cols#80, - kcud1=^J, kcub1=^U, kcuf1=^F, kcuu1=^K, lines#24, - cuf1=^F, ht=^I, rmcup=\f, smcup=\f, cuu1=^k, -# FREEDOM 100 by Liberty Electronics USA, SF. -f100|freedom|freedom100|freedom model 100, - am, bw, hs, mir, msgr, xon, - cols#80, lines#24, - acsc=+.'\,.-jHkGlFmEqKxJ, bel=^G, cbt=\EI, clear=^Z, - cr=\r, cub1=\b, cud1=\n, cuf1=\f, - cup=\E=%p1%'\s'%+%c%p2%'\s'%+%c, cuu1=^K, dch1=\EW, - dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET, - flash=\Eb$<50>\Ed, fsl=\r, home=^^, - hpa=\E]%p1%'\s'%+%c, ht=\t, hts=\E1, il1=\EE$<8.5*>, - ind=\n, ip=$<6>, is2=\Eg\Ef\r\Ed, kbs=\b, kcub1=\b, - kcud1=^V, kcuf1=\f, kcuu1=^K, kf0=^AI\r, kf1=^A@\r, - kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, - kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, - rmacs=\E%, rmir=\Er, rmso=\EG0, rmul=\EG0, smacs=\E$, - smir=\Eq, smso=\EG4, smul=\EG8, tbc=\E3, tsl=\Eg\Ef, - vpa=\E[%p1%'\s'%+%c, -f100-rv|freedom-rv|freedom 100 in reverse video, - is2=\Eg\Ef\r\Eb, flash=\Ed$<50>\Eb, use=f100, -# -# Problem with vi(1). Liberty terminals use the ^V -# code for the down cursor key. When kcud1 is defined in terminfo -# as ^V, the Control Character Quoting capability (^V in insert mode) -# is lost! It cannot be remapped in vi because it is necessary to enter -# a ^V to to quote the ^V that is being remapped!!! -# -# f110 users will have to decide whether -# to lose the down cursor key or the quoting capability. We will opt -# initially for leaving the quoting capability out, since use of VI -# is not generally applicable to most interactive applications -# -# The same applies to f200 users, except that another option exists. -# This option has been chosen locally. It will not be distributed unless -# a user runs into this problem and requests assistance. Very few users, -# if any, should run into this problem. The local solution is in -# vifix.local.ti. The f200 has the ability to reprogram the down cursor -# key. The key is reprogrammed to ^J (linefeed). This value is remembered -# in non-volatile RAM, so powering the terminal off and on will not cause -# the change to be lost. The terminfo definition for the f200 is changed -# to identify kcud1 as ^J instead of ^V. -# -# -f110|freedom110|Liberty Freedom 110, - am, bel=^G, cols#80, lines#24, cr=^M, hs, mir, msgr, - eslok, xon, it#8, wsl#80, cbt=\EI, - tbc=\e3, clear=^Z, - el=\ET, ed=\EY, hpa=\E]%p1%' '%+%c, vpa=\E[%p1%' '%+%c, - cup=\e=%p1%' '%+%c%p2%' '%+%c, cud1=^V, home=^^, - cub1=\b, cuf1=^L, cuu1=^K, dch1=\eW, - dl1=\eR, dsl=\ef\r, smacs=\e$, rmacs=\e%%, blink=\eG2, - bold=\eG0, dim=\EG@, rev=\EG4, rmul=\eG0, - invis=\eG1, smso=\eG<, smul=\eG8, rmso=\eG0, sgr0=\eG0, - flash=\Eb\0\0\0\0\Ed, fsl=\r, - il1=\eE, kbs=\b, kclr=^^, kdch1=\eW, kdl1=\eR, - kel=\eT, ked=\eY, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, - kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, - kf0=^AI\r, kich1=\eQ, kil1=\eE, kcub1=\b, kcuf1=^L, kcuu1=^K, - mc4=\ea, mc5=\e`, hts=\e1, tsl=\ef, ind=\n, ri=\eJ - smir=\eO\eq, rmir=\er\eO, kcud1=^V, - cnorm=\e.2, cvvis=\e.2, civis=\e.1, -f110-14|Liberty Freedom 110 14inch, - dch1@,use=f110, -f110-w|Liberty Freedom 110 - 132 cols, - cols#132, use=f110, -f110-14w|Liberty Freedom 110 14in/132 cols, - cols#132, dch1@, use=f110, -f200|freedom200|Liberty Freedom 200, - am, bel=^G, cols#80, lines#24, cr=^M, hs, mir, msgr, - eslok, xon, it#8, wsl#80, cbt=\EI, - csr=\em0%p1%' '%+%c%p2%' '%+%c, tbc=\e3, clear=^Z, - el=\ET, ed=\EY, hpa=\E]%p1%' '%+%c, vpa=\E[%p1%' '%+%c, - cup=\e=%p1%' '%+%c%p2%' '%+%c, cud1=^V, home=^^, civis=\e.0, - cub1=\b, cnorm=\e.1, cuf1=^L, cuu1=^K, cvvis=\e.1, dch1=\eW, - dl1=\eR, dsl=\ef\r, smacs=\e$, rmacs=\e%%, blink=\eG2, - bold=\eG0, dim=\EG@, smir=\eq, rmir=\er, rev=\EG4, rmul=\eG0, - invis=\eG1, smso=\eG<, smul=\eG8, rmso=\eG0, sgr0=\eG0, - flash=\Eo\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\en, fsl=\r, - il1=\eE, kbs=\b, kclr=^^, kdch1=\eW, kdl1=\eR, kcud1=^V, - kel=\eT, ked=\eY, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, - kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, - kf0=^AI\r, kich1=\eQ, kil1=\eE, kcub1=\b, kcuf1=^L, kcuu1=^K, - mc4=\ea, mc5=\e`, hts=\e1, tsl=\ef, ind=\n, ri=\eJ, -f200-w|Liberty Freedom 200 - 132 cols, - cols#132, use=f200, -f200vi|Liberty Freedom 200 for vi, - am, bel=^G, cols#80, lines#24, cr=^M, hs, mir, msgr, - eslok, xon, it#8, wsl#80, cbt=\EI, - csr=\em0%p1%' '%+%c%p2%' '%+%c, tbc=\e3, clear=^Z, - el=\ET, ed=\EY, hpa=\E]%p1%' '%+%c, vpa=\E[%p1%' '%+%c, - cup=\e=%p1%' '%+%c%p2%' '%+%c, cud1=^V, home=^^, civis=\e.0, - cub1=\b, cnorm=\e.1, cuf1=^L, cuu1=^K, cvvis=\e.1, dch1=\eW, - dl1=\eR, dsl=\ef\r, smacs=\e$, rmacs=\e%%, blink=\eG2, - bold=\eG0, dim=\EG@, smir=\eq, rmir=\er, rev=\EG4, rmul=\eG0, - invis=\eG1, smso=\eG<, smul=\eG8, rmso=\eG0, sgr0=\eG0, - flash=\Eb\0\0\0\0\Ed, fsl=\r, - il1=\eE, kbs=\b, kclr=^^, kdch1=\eW, kdl1=\eR, kcud1=^J, - kel=\eT, ked=\eY, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, - kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, - kf0=^AI\r, kich1=\eQ, kil1=\eE, kcub1=\b, kcuf1=^L, kcuu1=^K, - mc4=\ea, mc5=\e`, hts=\e1, tsl=\ef, ind=\n, ri=\eJ, -f200vi-w|Liberty Freedom 200 - 132 cols for vi, - cols#132, use=f200vi, -omron|omron 8025AG, - cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EL, am, cub1=^H, ed=\ER, - cols#80, el=\EK, clear=\EJ, da, db, dch1=\EP, dl1=\EM, home=\EH, - lines#24, cuf1=\EC, rmso=\E4, ind=\ES, smso=\Ef, ri=\ET, - cuu1=\EA, cvvis=\EN, -plasma|plasma panel, - am, cub1=^H, clear=^L, cols#85, home=^^, lines#45, cuf1=\030, - cuu1=\026, cr=^M, cud1=^J, ind=^J, bel=^G, -ramtek|ramtek 6000, - cr=^M, cud1=^J, ind=^J, bel=^G, lines#24, cols#78, am, - clear=[alpha]\n[erase]\n, cub1=^H, -soroc|iq120|soroc 120, - am, - cols#80, lines#24, - bel=^G, clear=\E*$<2>, cr=\r, cub1=\b, cud1=\n, - cuf1=\f, cup=\E=%p1%'\s'%+%c%p2%'\s'%+%c, cuu1=^K, - ed=\EY, el=\ET, home=^^, ind=\n, kcub1=\b, kcud1=\n, - kcuf1=\f, kcuu1=^K, -# Info: -# Note standout and underline are really sg#1, but when you -# backspace up the whole screen does standout or underline! -# The solution is to not specify sg#1 and live with it. -# -# iq140 standout and underline are confused. What we have -# included here are reasonable possiblities for these two. -# Neither are really correct. -# -iq140|soroc 140, - cr=^M, cud1=^J, ind=^J, bel=^G, cols#80, lines#24, am, - clear=\E+, cub1=^H, cup=\E=%p1%' '%+%c%p2%' '%+%c, cuf1=^L, cuu1=^K, - home=^^, ll=^^^K, el=\Et, ed=\Ey, il1=\Ee$<1*>, dl1=\Er$<.7*>, - smir=\E9, cbt=\EI, rmir=\E8, mir, dch1=\Ew, smso=\E\177, rmso=\E\177, - kbs=^H, kcuf1=^L, khome=^^, kcuu1=^K, kf0=^A0\r, - kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, - kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, smul=\E^A, - rmul=\E^A, -swtp|ct82|southwest technical products ct82, - cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, il1=^\^y, - ed=^v, el=^F, clear=^L, cup=^k%p2%c%p1%c, cols#82, lines#20, dl1=^z, - cuf1=^s, cuu1=^a, smso=^^^v, rmso=^^^F, dch1=^\^h, ich1=^\^x, home=^p, - ind=^n, ri=^o, ll=^c, - is2=^\^r^^^s^^^d^]^w^i^s^^^]^^^o^]^w^r^i, -# Info: -# Another new terminal, tested, seems to work fine with vi. -# -synertek|ktm|380|Synertek KTM 3/80 tubeless terminal, - am, cub1=^H, cols#80, lines#24, ed=\EJ, el=\EK, clear=^Z, - cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, cuf1=^L, -# Info: -# TAB -# The tab 132 uses xon/xoff, so no padding needed. -# smkx/rmkx have nothing to do with arrow keys. -# is2 sets 80 col mode, normal video, autowrap on (for am). -# Seems to be no way to get rid of status line. -# -tab132|tab|tab 132/15, - am, da, db, mir, msgr, xenl, xon, - cols#80, it#8, lines#24, lm#96, vt#3, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, - clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr, - cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\n, - cuf=\E[%p1%dC, cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH, - cuu=\E[%p1%dA, cuu1=\E[A$<2>, dch1=\E[P, dl1=\E[M, - ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, - enacs=\E(B\E)0, home=\E[H, ht=\t, hts=\EH, il1=\E[L, - ind=\n, is2=\E[?7h\E[?3l\E[?5l, ka1=\EOq, ka3=\EOs, - kb2=\EOr, kbs=\b, kc1=\EOp, kc3=\EOn, kcub1=\E[D, - kcud1=\E[B, kcuf1=\EOC, kcuu1=\E[A, kent=\EOM, - kf0=\EOy, kf1=\EOP, kf10=\EOx, kf2=\EOQ, kf3=\EOR, - kf4=\EOS, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, - kf9=\EOw, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, - rmir=\E[4l, rmso=\E[m$<2>, rmul=\E[m$<2>, - rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, - sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t^N%e^O%;, - sgr0=\E[m^O$<2>, smacs=^N, smir=\E[4h, - smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, -tab132-w, - cols#132, is2=\E[?7h\E[?3h\E[?5l, use=tab132, -tab132-rv, - is2=\E[?7h\E[?3l\E[?5h, use=tab132, -tab132-w-rv, - is2=\E[?7h\E[?3h\E[?5h, use=tab132-w, -# Info: -# TEC (various terminals labelled "tec" - manufacturers unknown) -# tec is untested, and taken from CB/Unix virtual terminal driver. -# Upper case terminal, uses lower case for control sequences!!! -# The driver shows the C ~ operator used on CM coordinates. -# -tec400|tec scope, - cr=^M, cud1=^J, ind=^J, bel=^G, cup=l%p2%~%c%p1%~%c, - cuu1=x, cud1=h, cuf1=g, cub1=w, home=i, smso={, rmso=|, - xmc#1, clear=f, il1=e, dl1=u, ich1=d, dch1=t, el=c, ed=s, -tec500|tec 500, - cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, - cup=\E=%p1%' '%+%c%p2%' '%+%c, clear=^Z$<20>, - cols#80, home=^^, lines#24, cuf1=^L, cuu1=^K, smso=^], rmso=^\, -tec, - lines#24, cols#80, clear=^l, cuu1=^k, cuf1=\037, am, - cub1=^H, home=\036, cr=^M, cud1=^J, ind=^J, bel=^G, -teletec|teletec datascreen, - cr=^M, cud1=^J, ind=^J, bel=^G, - am, cub1=^H, cols#80, clear=^l, home=^^, lines#24, cuf1=^_, cuu1=^k, -vc404|volker-craig 404, - cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, ed=^W$<40>, el=^V$<20>, - clear=^X$<40>, cup=^P%p1%' '%+%c%p2%' '%+%c, cols#80, home=^Y$<40>, - kcud1=^J, kcub1=^H, kcuf1=^U, kcuu1=^Z, lines#24, cuf1=^U, cuu1=^Z, -vc404-s|volker-craig 404 w/standout mode, - rmso=^O, smso=^N, use=vc404, -vc404-na|volker-craig 404 w/no arrow keys, - kcuf1@, kcuu1@, use=vc404, -vc404-s-na|volker-craig 404 w/standout mode and no arrow keys, - rmso=^O, smso=^N, use=vc404-na, -vc415|volker-craig 415, - clear=^L, use=vc404, -# Info: -# Missing in vc303a and vc303 descriptions: they scroll 2 lines -# at a time every other linefeed. -# -vc303-a|vc403a|volker-craig 303a, - cr=^M, cud1=^J, bel=^G, am, cub1=^H, el=^V$<20>, clear=^X$<40>, - cols#80, home=^Y$<40>, kcud1=^J, kcub1=^H, kcuf1=^U, - kcuu1=^Z, lines#24, ll=^P^@W, cuf1=^U, cuu1=^Z, -vc303|vc103|vc203|volker-craig 303, - cr=^M, cud1=^J, bel=^G, am, cub1=^H, clear=^L$<40>, cols#80, - home=^K$<40>, kcud1=^J, kcub1=^H, kcuf1=^I, kcuu1=^N, lines#24, - ll=^O$<1>W, cuf1=^I, cuu1=^N, -zen30|z30|zentec 30, - cr=^M, cud1=^J, ind=^J, bel=^G, mir, cols#80, lines#24, - ul, il1=\EE$<1.5*>, cub1=^H, el=\ET$<1.0*>, - cup=\E=%p1%' '%+%c%p2%' '%+%c, clear=\E*, home=^^, cuf1=^L, - rmso=\EG0, smso=\EG6, cuu1=^K, smir=\Eq, rmir=\Er, - am, dch1=\EW, dl1=\ER$<1.5*>, ed=\EY, -# Info: -# COMPUCOLOR, ISC, INTECOLOR (?) -# These compucolors appear similar, but they at least have -# different sized screens. I don't know what's going on here. -# -# There is further confusion since intecolor seems to call -# themselves isc too. -# -# The following termcap for the Intelligent Systems Corporation -# 8001 color terminal with lower-case and 48-line options -# disallows global motion to get around the 2-lines-at-a-time -# scrolling problem. It has been tested and works fine except -# when indented lines are scrolled in from the bottom of the -# screen. The latter problem originates with firmware which -# interprets NL as NL-CR when the cursor is on the bottom line -# of the screen. -# -8001|isc|isc8001|compucolor 8001, - cr=^M$<1>, cud1=^J$<1>, ind=^J$<1>, bel=^G, am, cols#80, lines#47, - il1=\EU$<5*>, dl1=\EV^\$<5*>, clear=^L$<31>, smir=^S\EQ$<1>, - rmir=^R\EK$<1>, kcub1=^Z, kcuf1=^Y, kcuu1=^\, kcud1=^J, khome=^H, - cub1=^Z$<1>, cuf1=^Y$<1>, cuu1=^\$<1>, smul=^Q$<1>, rmul=^R$<1>, -# cup=^C%p2%c%p1%c, -compucolor2|compucolorii|compucolor 2, - cr=^M, cud1=^J, ind=^J, bel=^G, - ht=^I, am, cup=^C%p2%c%p1%c, cub1=^Z, lines#32, cols#64, - clear=^L, home=^H, cuf1=^Y, cuu1=^\, -# Info: -# INTERACTIVE SYSTEMS -# smkx/rmkx from dgc, to make insert mode key work in Rand Editor. -# probably needs more keys defined. -# -intext|Interactive Systems Corporation modified owl 1200, - cr=^M, cud1=^J, ind=^J, bel=^G, il1=\020$<5.5*>, am, cub1=^_, - cub1=^H, cbt=^Y, ed=\026J$<5.5*>, el=^K\160^R, - clear=\014$<132>, cup=\017%p1%' '%+%c%p2%' '%+%c, cols#80, - dch1=\022$<5.5*>, dl1=\021$<5.5*>, rmir=\026\074, - smir=\026\073, ip=$<5.5*>, lines#24, cuf1=\036, ht=^I, - cuu1=\034, rmso=^V# , xmc#1, smso=^V$\054, - smkx=\036\072\264\026%, rmkx=\269, - kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=\034, kbs=^H, khome=^Z, - kf1=^VA\r, kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, - kf6=^VF\r, kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, kf0=^VJ\r, -intext2|intextii|INTERACTIVE modified owl 1251, - am, bw, ul, cols#80, lines#24, - bel=^G, blink=\E[10\sD, bold=\E[22\sD, cbt=\E[Z, - clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD, cub1=\E[D, - cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%?%p1%t%p1%{1}%+%d%;%?%p2%t%p2%{1}%+;%d%;H, - cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, - dim=\E[0\sD, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, - flash=\E[;;;;;;;;;2;;u\E[;;;;;;;;;1;;u, home=\E[H, - hpa=\E[%?%p1%t%p1%{1}%+%d%;G, ht=\t, ich=\E[%p1%d@, - ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, - indn=\E[%p1%dS, kbs=\b, kcub1=\ED\r, kcud1=\EB\r, - kcuf1=\EC\r, kcuu1=\EA\r, kf0=\E@\r, kf1=\EP\r, - kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r, kf5=\EU\r, kf6=\EV\r, - kf7=\EW\r, kf8=\EX\r, kf9=\EY\r, khome=\ER\r, - lf0=REFRSH, lf1=DEL\sCH, lf2=TABSET, lf3=GOTO, - lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT, - lf9=RIGHT, rev=\E[6\sD, ri=\E[T, rin=\E[%p1%dT, - rmso=\E[2\sD, rmul=\E[2\sD, - sgr=\E[%?%p5%t%{0}%e%{2}%;%?%p1%p3%|%p6%|%t%{4}%e%{0}%;%|%?%p4%t%{8}%e%{0}%;%|%?%p2%p6%|%t%{16}%e%{0}%;%|%d\sD, - sgr0=\E[2\sD, smso=\E[6\sD, smul=\E[18\sD, -# ncr: NCR -# -# The 7900 model 1 is the default 7900 type terminal, so ``7900'' refers to it. -# 7900 is not used by other terminals, so there is no name clash. -ncr7900i|7900i|ncr7900|7900|ncr 7900 model 1, - am, bel=^G, bw, clear=^L, cols#80, cr=^M, - cub1=^H, cud1=^J, cuf1=^F, cuu1=^Z, - ind=^J, ll=^A, - cup=\E1%p2%c%p1%c, - ed=\Ek, el=\EK, - kcud1=^J, kcub1=^U, kcuf1=^F, kcuu1=^Z, khome=^A, - is2=\E0@\E3\E4, lines#24, - rmso=\E0@, xmc#1, smso=\E0Q, - blink=\E0B, dim=\E0A, rev=\E0P, - smul=\E0`, rmul=\E0@, ul, sgr0=\E0@, -# Since each attribute paramter is 0 or 1, we shift each attribute (standout, -# reverse, blink, dim, and underline) the appropriate number of bits (by -# multiplying the 0 or 1 by a coorect factor to shift) so the bias character, -# '@' is (effectively) "or"ed with each attribute to generate the proper third -# character in the <ESC>0 sequence. The "sgr" string implements the following -# equation: -# -# ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) => -# ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17)) -# -# Where: P1 <==> Standout attribute parameter -# P2 <==> Underline attribute parameter -# P3 <==> Reverse attribute parameter -# P4 <==> Blink attribute parameter -# P5 <==> Dim attribute parameter - sgr=\E0%p5%'@'%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c, - mc4=^T, mc5=^R, -# It seem users have a couple odd problems with ``vi'' when we define arrows, -# since the arrow character has an otherwise special meaning to ``vi''. -7900i-na|ncr7900i-na|ncr7900-na|7900-na|ncr 7900 model 1 with no arrows, - kcud1@, kcub1@, kcuf1@, kcuu1@, use=ncr7900i, -# The entry for the model 4 is mostly untested. People seem to prefer -# other models. This is a pretty outdated model. -7900iv|ncr7900iv|ncr 7900 model 4, - am, bw, hs, eslok, - cols#80, lines#24, - bel=^G, cr=\r, clear=\f, - cup=^K%p1%'@'%+%c\E^E%p2%02d, cud1=\n, home=^K@\E^E00, - cub1=\b, dl1=\E^O, dsl=\Ey1, - fsl=\Ek\Ey5, il1=\E^N, kbs=\b, - kcud1=\EB, kf1=\ES, kf2=\ET, - kf3=\EU, kf4=\EV, kf5=\EW, - kf6=\EP, kf7=\EQ, kf8=\ER, - khome=\EH, kcub1=\ED, kcuf1=\EC, - kcuu1=\EA, lf6=blue, lf7=red, - lf8=white, nel=\r\n, ind=\n, - tsl=\Ej\Ex5\Ex1\EY8%p1%' '%+%c\Eo, - ind=^J, -# Warning: This terminal will lock out the keyboard when it receives a CTRL-D. -# The user can enter a CTRL-B to get out of this locked state. -ncr7901|7901|ncr 7901 model, - cols#80, lines#24, - am, bel=^G, bw, clear=^L, cr=^M, - cub1=^H, cud1=^J, cuf1=^F, cuu1=^Z, - ind=^J, ll=^A, - ed=\Ek, el=\EK, - civis=^W, cnorm=^X, - mc4=^T, mc5=^R, - kcud1=^J, kcub1=^U, kcuf1=^F, kcuu1=^Z, kclr=^L, khome=^A, - is2=^X, - .is2=\E4^O^X, - cup=\EY%p1%' '%+%c%p2%' '%+%c, - vpa=^K%p1%'@'%+%c, -# We want to output the character given by the formula: -# ((col / 10) * 16) + (col % 10) where "col" is "p1" - hpa=^P%p1%{10}%/%{16}%*%p1%{10}%m%+%c, - sgr=\E0%p5%'@'%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c^N, - blink=\E0B, dim=\E0A, rev=\E0P, - smso=\E0Q^N, rmso=^O, .msgr, - smul=\E0`^N, rmul=^O, sgr0=^O, ul, -# -# -# -t88|Synco T88 terminal, - am, xon, - cols#80, lines#24, xmc#0, - bel=^G, clear=^Z, cr=\r, cub1=\b, cud1=\n, cuf1=\f, - cup=\E=%p1%'\s'%+%c%p2%'\s'%+%c, cuu1=^K, dch1=\EW, - dl1=\ER$<1*>, el=\ET, home=^^, ht=\t, ich1=\EQ, - if=/usr/share/lib/tabset/stdcrt, il1=\EE$<1*>, ind=\n, - kbs=\b, kcub1=\b, kcud1=\n, kcuf1=\f, kcuu1=^K, - kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, - kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, - rmso=\E(, rmul=\Em, smso=\E), smul=\El, -# -# -t88-nr|Synco T88 terminal without rev video, - am, xon, - cols#80, lines#24, - bel=^G, clear=^Z, cr=\r, cub1=\b, cud1=\n, cuf1=\f, - cup=\E=%p1%'\s'%+%c%p2%'\s'%+%c, cuu1=^K, dch1=\EW, - dl1=\ER$<1*>, el=\ET, home=^^, ht=\t, ich1=\EQ, - if=/usr/share/lib/tabset/stdcrt, il1=\EE$<1*>, ind=\n, - kbs=\b, kcub1=\b, kcud1=\n, kcuf1=\f, kcuu1=^K, - kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, - kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, - rmul=\Em, smul=\El, -i279|Intel SBX279, - cols#80, lines#25, -#### acsc=''aaffggj\343k\341l\340m\342n\352q\350t\346u\345v\347w\344x\351, - bel=^G, clear=\E+, cr=\r, cub1=\b, cud1=\n, cuf1=\f, - cup=\E=%p1%'\s'%+%c%p2%'\s'%+%c, cuu1=^K, dl1=\ER, - ed=\EY, el=\ET, home=^^, il1=\EE, ind=\n, is2=\Er\E+, - kcub1=\b, kcud1=\n, kcuf1=\f, kcuu1=^K, kdl1=\ER, - khome=^^, kil1=\EE, - smso=\Ej, rmso=\Ek, - sgr0=\Ek$<2>, |