diff options
Diffstat (limited to 'usr/src/cmd/terminfo/print.ti')
| -rw-r--r-- | usr/src/cmd/terminfo/print.ti | 947 |
1 files changed, 0 insertions, 947 deletions
diff --git a/usr/src/cmd/terminfo/print.ti b/usr/src/cmd/terminfo/print.ti deleted file mode 100644 index f2ab4c8f84..0000000000 --- a/usr/src/cmd/terminfo/print.ti +++ /dev/null @@ -1,947 +0,0 @@ -# -# CDDL HEADER START -# -# The contents of this file are subject to the terms of the -# Common Development and Distribution License, Version 1.0 only -# (the "License"). You may not use this file except in compliance -# with the License. -# -# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE -# or http://www.opensolaris.org/os/licensing. -# See the License for the specific language governing permissions -# and limitations under the License. -# -# When distributing Covered Code, include this CDDL HEADER in each -# file and include the License file at usr/src/OPENSOLARIS.LICENSE. -# If applicable, add the following below this CDDL HEADER, with the -# fields enclosed by brackets "[]" replaced with your own identifying -# information: Portions Copyright [yyyy] [name of copyright owner] -# -# CDDL HEADER END -# -# -# Copyright 1993 Sun Microsystems, Inc. All rights reserved. -# Use is subject to license terms. -# - -# Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T -# All Rights Reserved - -#ident "%Z%%M% %I% %E% SMI" - -###################################################################### -# -# Generic entry for the C.Itoh 8510 printer and emulations: -# - -citoh+basic, - -# The 8510 I use only allows 79 columns! - cols#79, - - lines#66, - it#8, - - orc#1, - orhi#10, - orl#24, - orvi#144, - - cr=\r, - cud1=\n, - cuf1=\s, - ff=\f, - ht=\t, - - cpi=%?%p1%{10}%=%t\EN%e%p1%{12}%=%t\EE%e%p1%{16}%=%p1%{17}%=%O%t\EQ%;, - cvr=%?%p1%{0}%>%p1%{100}%<%&%t\ET%p1%02d%;, - - is1=^Q^X, - is2=\Ec1\Ev66., - - smso=\E!, - rmso=\E", - smul=\EX, - rmul=\EY, - bold=\E!, - ssubm=\Es2, - rsubm=\Es0, - ssupm=\Es1, - rsupm=\Es0, - swidm=^N, - rwidm=^O, - sgr0=\E"\EY\Es0^O, - sgr=%?%p1%p6%|%t\E!%e\E"%;%?%p2%t\EX%e\EY%;, - - rep=\ER%p2%03d%p1%c, - - snlq=\Em2, - snrmq=\Em1, - sdrfq=\Em0, - - smglp=\EL%p1%03d, - smgrp=\E/%{1}%p1%+%03d, - - slines=\Ev%p1%02d., - u9=\Ev%p1%02d., - -citoh+low, - - npins#8, - spinv#68, - spinh#136, - - porder=8\,7\,6\,5\,4\,3\,2\,1;0, - - sbim=\ES%p1%04d, - - birep=\EV%p2%04d%p3%c, - - bitwin#1, - bitype#1, - -# Set the line spacing to 17/144 inch to get (almost) 68 dots -# per inch vertically (8 * 144/17). -# Set the character spacing to compressed (1/17 inch or 17 -# characters per inch); at 136 dots per inch horizontally this -# means 8 dots per character. -# Set the left margin at the left edge of the image. -# The C.Itoh doesn't have parameterized vertical motion, -# so we simulate it with linefeeds. Assume we never need -# to move more than 63 lines (at 17/144 LPI). -# Set uni-directional motion; bi-directional causes a wavy -# image. - defbi=%?%p5%{1}%=%t\ET17\EQ\EL%p1%{8}%/%03d%p2%{8}%/%Py%?%gy%{31}%>%t\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n%gy%{32}%-%Py%;%?%gy%{15}%>%t\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n%gy%{16}%-%Py%;%?%gy%{7}%>%t\n\n\n\n\n\n\n\n%gy%{8}%-%Py%;%?%gy%{3}%>%t\n\n\n\n%gy%{4}%-%Py%;%?%gy%{1}%>%t\n\n%gy%{2}%-%Py%;%?%gy%{0}%>%t\n%;\E>%;, - - endbi=\EA\EP\EL001\E<, - - binel=\n\r\EL%p1%{8}%/%03d, - -###################################################################### -# -# Specific printers: -# - -citoh|8510|C.Itoh 8510 printer, - - bufsz#1024, - cps#120, - - use=citoh+basic, use=citoh+low, - -###################################################################### -# -# Generic entry for the daisy wheel printers and emulations: -# - -# -# Basic capabilities: -# -daisy+basic, - - daisy, - - cols#132, - lines#66, - - orc#12, - orhi#120, - orl#8, - orvi#48, - - cr=^M, - cud1=^J, - cuf1=\s, - ff=^L, - ht=^I, - hpa=%?%p1%{100}%<%t\EC%p1%02d%e%p1%{110}%<%t\ECA%p1%{100}%-%d%e%p1%{120}%<%t\ECB%p1%{110}%-%d%e%p1%{130}%<%t\ECC%p1%{120}%-%d%e%p1%{140}%<%t\ECD%p1%{130}%-%d%e%p1%{150}%<%t\ECE%p1%{140}%-%d%e%p1%{160}%<%t\ECF%p1%{150}%-%d%;, - vpa=%?%p1%{100}%<%t\EP%p1%02d%e%p1%{110}%<%t\EPA%p1%{100}%-%d%e%p1%{120}%<%t\EPB%p1%{110}%-%d%e%p1%{130}%<%t\EPC%p1%{120}%-%d%e%p1%{140}%<%t\EPD%p1%{130}%-%d%e%p1%{150}%<%t\EPE%p1%{140}%-%d%e%p1%{160}%<%t\EPF%p1%{150}%-%d%;, - - chr=%?%p1%{100}%<%t\EE%p1%02d%e%p1%{110}%<%t\EEA%p1%{100}%-%d%e%p1%{120}%<%t\EEB%p1%{110}%-%d%e%p1%{130}%<%t\EEC%p1%{120}%-%d%e%p1%{140}%<%t\EED%p1%{130}%-%d%e%p1%{150}%<%t\EEE%p1%{140}%-%d%e%p1%{160}%<%t\EEF%p1%{150}%-%d%;, - cvr=%?%p1%{100}%<%t\EL%p1%02d%e%p1%{110}%<%t\ELA%p1%{100}%-%d%e%p1%{120}%<%t\ELB%p1%{110}%-%d%e%p1%{130}%<%t\ELC%p1%{120}%-%d%e%p1%{140}%<%t\ELD%p1%{130}%-%d%e%p1%{150}%<%t\ELE%p1%{140}%-%d%e%p1%{160}%<%t\ELF%p1%{150}%-%d%;, - - is2=\E\rP\EW\E.\EL08\EE12\E%\E<, - - smso=\EQ, - rmso=\ER, - smul=\EI, - rmul=\EJ, - bold=\EKd, - sshm=\EQ, - rshm=\ER, - sgr0=\ER\EM\EJ, - sgr=%?%p1%t\EQ%e\ER%;%?%p2%t\EI%e\EJ%;%?%p6%t\EKd%e\EM%;, - - smgb=\E-, - smgl=\E9, - smgr=\E0, - smgt=\E+, - - slines=\EF%p1%02d, - u9=\EF%p1%02d, - -# -# Graphics capabilities: -# -daisy+lowres, - -# -# We could use the graphics on/graphics off control sequences -# (ESC G/ESC 4) but for these problems: -# -# - graphics mode gets turned off when a \r is received; -# - printing a character doesn't cause motion, which -# means that each ``cell'' must be followed by a space; -# - to get the best aspect ratio, three horizontal dots -# must be sent per ``cell'' (using the ESC 3 graphics mode -# (1/60 instead of 1/120) alleviates this problem but -# gives a worse aspect ratio). -# -# So instead we set the HMI and VMI to 1/40 and 1/48 inch, -# respectively. -# - npins#1, - spinv#48, - spinh#40, - - porder=o\,o\,o\,o\,1\,1\,1\,o;32, - - bitwin#1, - bitype#1, - - birep=%?%p3%{32}%=%t\EH%p2%{3}%*%Px%gx%{256}%/%{64}%+%c%gx%{256}%m%{16}%/%{64}%+%c%gx%{16}%m%{64}%+%c%;, - -# THIS ASSUMES WE START AT THE TOP OF THE PAGE! (although -# maybe not in the first column.) - defbi=%?%p5%{1}%=%t\EL01\EE03%p1%{3}%*%Px\r\EH%gx%{256}%/%{64}%+%c%gx%{256}%m%{16}%/%{64}%+%c%gx%{16}%m%{64}%+%c\EV%p2%{256}%/%{64}%+%c%p2%{256}%m%{16}%/%{64}%+%c%p2%{16}%m%{64}%+%c\E>%;, - - endbi=\EL08\EE12\E<, - - binel=\n\r%p1%{3}%*%Px\EH%gx%{256}%/%{64}%+%c%gx%{256}%m%{16}%/%{64}%+%c%gx%{16}%m%{64}%+%c, - -###################################################################### -# -# Specific printers: -# - -daisy, - - use=daisy+basic, use=daisy+lowres, - -qume|sprint11|Qume Sprint 11, - - bufsz#500, - cps#55, - - use=daisy, - -###################################################################### -# -# Generic entries for the various DEC printers and emulations. -# -# The dec+... entries are really for any ANSI X3.64 printer, -# but "ansi" is already used for terminals. It would be more -# work to do "use=ansi" because there are too many screen -# oriented caps that would have to be removed. -# - -# -# Basic capabilities: -# -dec+basic, - - cols#132, - lines#66, - it#8, - - cpix, - orc#1, - orhi#10, - orl#2, - orvi#12, - -# -# FIX? Are xhpa and xvpa really needed? - xhpa, - xvpa, - - cr=^M, - ff=^L, - ht=^I, - cud1=^J, - cuf1=\s, - cuu1=\EM, - cud=\E[%p1%de, - cuf=\E[%p1%da, - hpa=\E[%p1%d`, - vpa=\E[%p1%dd, - nel=\EE, - - is1=\Ec, - is2=\E[20l, - - cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;, - lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;, - - csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;, - scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;, - - sshm=\E[5m, - rshm=\E[m, - - smgtp=\E[%p1%dr, - smgbp=\E[;%p1%dr, - smglp=\E[%{1}%p1%+%ds, - smgrp=\E[;%{1}%p1%+%ds, - - slines=\E[%p1%dt, - u9=\E[%p1%dt, - -# -# Graphics capabilities (low resolution, 6-pin): -# -dec+low, - - npins#6, - spinv#72, - spinh#75, - - porder=o\,o\,6\,5\,4\,3\,2\,1;63, - - bitwin#1, - bitype#1, - - birep=!%p2%d%p3%c, - -# X is in 1/75 increments; set char spacing to 1/16.7 -# increments to allow us to get close; column is X*16.7/75. -# Y is in 1/72 increments; set line spacing to 1/12 -# increments to allow us to get close; line is Y/6. - defbi=%?%p5%{1}%=%t\E[4w\E[%p1%{167}%*%{750}%/%d`\E[w\E[3z\E[%p2%{6}%/%dd\E[z\EP0q%;, - - endbi=^X, - - binel=-, - - bicr=$, - -###################################################################### -# -# Specific printers: -# - -la100|DEC LA100 Printer, - - use=dec+basic, use=dec+low, - -ln03|DEC LN03 Laser Printer, - -# I'm guessing here. I think the ln03 can scale up to 6. -# X is in 1/75 increments; set char spacing to 1/16.7 -# increments to allow us to get close; column is X*16.7/75. -# Y is in 1/72 increments; set line spacing to 1/12 -# increments to allow us to get close; line is Y/6. - defbi=%?%p5%{0}%>%p5%{7}%<%&%t\E[4w\E[%p1%{167}%*%{750}%/%d`\E[w\E[3z\E[%p2%{6}%/%dd\E[z\EP9;0;%p5%dq"1;1%;, - - use=dec+basic, use=dec+low, - -###################################################################### -# -# Epson LQ-2500 -# - -# -# Basic capabilities: -# -ep2500+basic, - - cols#136, - lines#66, - it#8, - - cpix, - orc#6, - orhi#60, - orl#30, - orvi#180, - - cr=^M, - cud1=^J, - cuf1=\s, - cub1=\b, - ff=^L, - ht=^I, - - cpi=%?%p1%{10}%=%t^R\EP%e%p1%{12}%=%t^R\EM%e%p1%{20}%=%t^O\EM%e%p1%{17}%=%t^O\EP%;, - cvr=%?%p1%{0}%>%p1%{256}%<%&%t\E3%p1%c%;, - - is1=^Q^X, - is2=\E@\E%0\EO, - - csnm=%?%p1%{0}%=%tcharacter_set_1%e%p1%{1}%=%tcharacter_set_2%e%p1%{2}%=%tusa%e%p1%{3}%=%tfrench%e%p1%{4}%=%tgerman%e%p1%{5}%=%tuk%e%p1%{6}%=%tdanish1%e%p1%{7}%=%tswedish%e%p1%{8}%=%titalian%e%p1%{9}%=%tspanish1%e%p1%{10}%=%tjapanese%e%p1%{11}%=%tnorwegian%e%p1%{12}%=%tdanish2%e%p1%{13}%=%tspanish2%e%p1%{14}%=%tlatin_american%;, - scs=%?%p1%{0}%=%t\E7%e%p1%{1}%=%t\E6%e%p1%{1}%>%p1%{15}%<%&%t\ER%p1%{126}%+%c%; - - smso=\EE, - rmso=\EF, - smul=\E-1, - rmul=\E-0, - bold=\EG, - sshm=\EE, - rshm=\EF, - ssubm=\ES1, - rsubm=\ET, - ssupm=\ES0, - rsupm=\ET, - swidm=\EW1, - rwidm=\EW0, - sitm=\E4, - ritm=\E5, - sgr0=\EF\E-0\EH\ET\EW0\E5, - sgr=%?%p1%t\EE%e\EF%;%?%p2%t\E-1%e\E-0%;%?%p6%t\EG%e\EH%;, - -# -# For now we can't set the margin in the first (0th) column -# due to limitations in the Curses code. This should be changed -# in the future. For now, shift right 1. Note that the right -# margin is the last USEABLE column in Terminfo, but is 1 -# PAST that for the Epson. - smglp=%?%p1%{256}%<%t\El%p1%{1}%+%c%;, - smgrp=%?%p1%{256}%<%t\EQ%p1%{2}%+%c%;, - - slines=%?%p1%{0}%>%p1%{128}%<%&%t\EC%p1%c%;, - u9=%?%p1%{0}%>%p1%{128}%<%&%t\EC%p1%c%;, - - snrmq=\Ex0, - snlq=\Ex1, - -# -# Graphics capabilities: -# -ep2500+low, - - npins#8, - spinv#60, - spinh#60, - - porder=1\,2\,3\,4\,5\,6\,7\,8;0, - - sbim=\EK%p1%{256}%m%c%p1%{256}%/%c, - - bitwin#1, - bitype#1, - -# Set the line spacing to 8/60 inch (7.5 lines per inch) -# to get 60 dots per inch vertically (7.5 lines/" * 8 pins/line). -# Set the character spacing to pica (1/10 inch or 10 characters -# per inch); at 60 dots per inch horizontally this means 6 -# dots per character. -# Set vertical and horizontal tab stops at the upper left corner -# of the image, then tab to the upper left corner. -# Note: $<> is a true null (only works with special Curses routine). -# THIS ASSUMES WE START AT THE TOP OF THE PAGE! (although -# maybe not in the first column.) - defbi=%?%p5%{1}%=%t\E3\030^R\EP\EB%p2%{8}%/%c$<>\ED%p1%{6}%/%c$<>\013\r\t%;, - - endbi=\E3\036, - - binel=\n\r\t, - - bicr=\r\t, - -# -# Graphics capabilities: -# -ep2500+high, - - npins#24, - spinv#180, - spinh#180, - - porder=1\,2\,3\,4\,5\,6\,7\,8\,9\,10\,11\,12\,13\,14\,15\,16\,17\,18\,19\,20\,21\,22\,23\,24;0, - - sbim=\E*\047%p1%{256}%m%c%p1%{256}%/%c, - -# Set the line spacing to 8/60 inch (7.5 lines per inch) -# to get 180 dots per inch vertically (7.5 lines/" * 24 pins/line). -# Set the character spacing to pica (1/10 inch or 10 characters -# per inch); at 180 dots per inch horizontally this means 18 -# dots per character. -# Set vertical and horizontal tab stops at the upper left corner -# of the image, then tab to the upper left corner. -# Note: $<> is a true null (only works with special Curses routine). -# THIS ASSUMES WE START AT THE TOP OF THE PAGE! (although -# maybe not in the first column.) - defbi=%?%p5%{1}%=%t\E3\030^R\EP\EB%p2%{24}%/%c$<>\ED%p1%{18}%/%c$<>\013\r\t%;, - - use=ep2500+low, - -# -# Color capability: -# -ep2500+color, - - colors#3, - - setcolor=%?%p1%{0}%=%t\Er0%;%?%p1%{1}%=%t\Er2%;%?%p1%{2}%=%t\Er1%;%?%p1%{3}%=%t\Er4%;, - - colornm=%?%p1%{0}%=%tblack%;%?%p1%{1}%=%tcyan%;%?%p1%{2}%=%tmagenta%;%?%p1%{3}%=%tyellow%;%?%p1%{4}%=%torange=yellow+magenta%;%?%p1%{5}%=%tgreen=yellow+cyan%;%?%p1%{6}%=%tviolet=magenta+cyan%;%?%p1%{7}%=%tbrown=magenta+black%;, - -###################################################################### -# -# Specific printers: -# - -epson2500|Epson LQ-2500; low resolution, - - use=ep2500+basic, use=ep2500+low, use=ep2500+color, - -epson2500-hi|Epson LQ-2500; high resolution, - - use=ep2500+basic, use=ep2500+high, use=ep2500+color, - -epson2500-80|Epson LQ-2500; low resolution; 80-col, - - cols#80, - use=ep2500+basic, use=ep2500+low, use=ep2500+color, - -epson2500-hi80|Epson LQ-2500; high resolution; 80-col, - - cols#80, - use=ep2500+basic, use=ep2500+high, use=ep2500+color, - -###################################################################### -# -# Generic entry for the HP Laserjet printers and emulations: -# - -# -# Basic capabilities: -# -hplaser+basic, - - cols#80, - lines#60, - - orc#12, - orhi#120, - orl#8, - orvi#48, - - cr=^M, - cud1=^J, - cuf1=\s, - cud=\E&a+%p1%dR, - cuf=\E&a+%p1%dC, - ff=^L, - hpa=\E&a%p1%dC, - vpa=\E&a%p1%dR, - - cpi=%?%p1%{10}%=%t\E&k0S%e%p1%{17}%=%t\E&k2S%;, - chr=%?%p1%{0}%>%p1%{127}%<%t\E&k%p1%dH%;, - cvr=%?%p1%{0}%>%p1%{127}%<%t\E&l%p1%dC%;, - lpi=%?%p1%{1}%=%t\E&l1D%e%p1%{2}%=%t\E&l2D%e%p1%{3}%=%t\E&l3D%e%p1%{4}%=%t\E&l4D%e%p1%{6}%=%t\E&l6D%e%p1%{8}%=%t\E&l8D%e%p1%{12}%=%t\E&l12D%e%p1%{16}%=%t\E&l16D%e%p1%{24}%=%t\E&l24D%e%p1%{48}%=%t\E&l48D%;, - -# Reset printer and set how EOL is handled. -# \E&k0G is cr=cr, lf=lf, ff=ff -# \E&k1G is cr=cr+lf, lf=lf, ff=ff -# \E&k2G is cr=cr, lf=cr+lf, ff=cr+ff (this is what UNIX uses) -# \E&k3G is cr=cr+lf, lf=cr+lf, ff=cr+ff - - is2=\EE\E&k2G, - mgc=\E9, - - rmul=\E&d\100, - ritm=\E(s0S, - smul=\E&dD, - sitm=\E(s1S, - smgtp=\E&l%p1%{1}%+%dE, - smgbp=\E&l%p1%{1}%+%dF, - smglp=\E&a%p1%dL, - smgrp=\E&a%p1%dM, - -#Set top margin at +2 offset - smgtp=\E&l%p1%dE, - -#Set page length - slines=\E&l%p1P, - u9=\E&l%p1P, - -# -# Graphics capabilities: -# -hplaser+high, - - npins#8, - spinv#300, - spinh#300, - - porder=1\,2\,3\,4\,5\,6\,7\,8;0, - - sbim=\E*b%p1%dW, - - bitwin#1, - bitype#2, - -# X (or Y) * scale * 12/5 == pos in decipoints (12/5 == 720/300) - defbi=%?%p5%{0}%>%p5%{5}%<%&%t\E&a%p1%p5%*%{12}%*%{5}%/%dH\E&a%p2%p5%*%{12}%*%{5}%/%dV\E*t%{300}%p5%/%dR\E*r1A%;, - - endbi=\E*rB, - -###################################################################### -# -# Specific printers: -# - -hplaserjet|hplaser|HP Laserjet I, - - use=hplaser+basic, use=hplaser+high, - -###################################################################### -# -# Generic entries for the various IBM printers and emulations. -# - -################################### -# -# IBM Graphics -# - -# -# Basic capabilities: -# -ibmg+basic, - - cols#80, - lines#66, - it#8, - - cpix, - orc#1, - orhi#10, - orl#12, - orvi#72, - - cr=^M, - ff=^L, - ht=^I, - cud1=^J, - cuf1=\s, - - cpi=%?%p1%{10}%=%t^R%e%p1%{16}%=%p1%{17}%=%O%t^O%;, - cvr=%?%p1%{0}%>%p1%{256}%<%&%t\EA%p1%c\E2%;, - - is1=^X, - is2=^R\EA\014\E2\EF\EH\EW0\ET\E-0\E7\EO, - - csnm=%?%p1%{0}%=%p1%{1}%=%O%tcharacter_set_1%e%p1%{2}%=%tcharacter_set_2%;, - scs=%?%p1%{0}%=%p1%{1}%=%O%t\E7%e%p1%{2}%=%t\E6%;, - - smso=\EE, - rmso=\EF, - smul=\E-1, - rmul=\E-0, - bold=\EG, - smacs=\E6, - rmacs=\E7, - sshm=\EE, - rshm=\EF, - ssubm=\ES1, - rsubm=\ET, - ssupm=\ES0, - rsupm=\ET, - swidm=\EW1, - rwidm=\EW0, - sgr0=\EF\E-0\EH\E7\ET\EW0, - sgr=%?%p1%t\EE%e\EF%;%?%p2%t\E-1%e\E-0%;%?%p6%t\EG%e\EH%;%?%p9%t\E6%e\E7%;, - - slines=%?%p1%{0}%>%p1%{128}%<%&%t\EC%p1%c%;, - u9=%?%p1%{0}%>%p1%{128}%<%&%t\EC%p1%c%;, - -# -# Graphics capabilities (low resolution, 9-pin): -# -ibmg+low, - - npins#8, - spinv#72, - spinh#60, - - porder=1\,2\,3\,4\,5\,6\,7\,8;0, - - sbim=\EK%p1%{256}%m%c%p1%{256}%/%c, - - bitwin#1, - bitype#1, - -# Set the line spacing to 8/72 inch (9 lines per inch) -# to get 72 dots per inch vertically (9 lines/inch * 8 pins/line). -# Set the character spacing to pica (1/10 inch or 10 characters -# per inch); at 60 dots per inch horizontally this means 6 -# dots per character. -# The IBM Graphics doesn't have parameterized motion, -# so we simulate it with linefeeds and spaces. -# Assume we never need to move across more than 63 colums -# or down more than 31 lines. -# THIS ASSUMES WE START AT THE TOP OF THE PAGE! (although -# maybe not in the first column.) - defbi=%?%p5%{1}%=%t\EA\010\E2^R%p2%{8}%/%Py%?%gy%{15}%>%t\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n%gy%{16}%-%Py%;%?%gy%{7}%>%t\n\n\n\n\n\n\n\n%gy%{8}%-%Py%;%?%gy%{3}%>%t\n\n\n\n%gy%{4}%-%Py%;%?%gy%{1}%>%t\n\n%gy%{2}%-%Py%;%?%gy%{0}%>%t\n%;\r%p1%{6}%/%Px%?%gx%{31}%>%t %gx%{32}%-%Px%;%?%gx%{15}%>%t %gx%{16}%-%Px%;%?%gx%{7}%>%t %gx%{8}%-%Px%;%?%gx%{3}%>%t %gx%{4}%-%Px%;%?%gx%{1}%>%t %gx%{2}%-%Px%;%?%gx%{0}%>%t %;%;, - - endbi=\EA\014\E2, - - binel=\n\r%p1%{6}%/%Px%?%gx%{31}%>%t %gx%{32}%-%Px%;%?%gx%{15}%>%t %gx%{16}%-%Px%;%?%gx%{7}%>%t %gx%{8}%-%Px%;%?%gx%{3}%>%t %gx%{4}%-%Px%;%?%gx%{1}%>%t %gx%{2}%-%Px%;%?%gx%{0}%>%t %;, - - bicr=\r%p1%{6}%/%Px%?%gx%{31}%>%t %gx%{32}%-%Px%;%?%gx%{15}%>%t %gx%{16}%-%Px%;%?%gx%{7}%>%t %gx%{8}%-%Px%;%?%gx%{3}%>%t %gx%{4}%-%Px%;%?%gx%{1}%>%t %gx%{2}%-%Px%;%?%gx%{0}%>%t %;, - -################################### -# -# IBM Color -# - -# -# Basic capabilities: -# -ibmc+basic, - - cub1=\b, - - is1=^Q^X, - is2=^R\EA\014\E2\EF\EH\EW0\ET\E-0\E7\EO\ER\E50\EM0\EX^A\210\Eb\ECB, - - smglp=\EX%p1%{1}%+%c%p2%{1}%+%c, - - use=ibmg+basic, - -# -# Graphics capabilities (low resolution, 9-pin, 5:6 aspect ratio): -# -ibmc+low+5x6, - - spinv#84, - spinh#70, - -# Set 5:6 aspect ratio. -# Set the line spacing to 7/72 inch (10.29 lines per inch) -# to get approximately 84 dots per inch vertically -# (10.29 lines/inch * 8 pins/line equals 82.28 dots per inch). -# Set the character spacing to pica (1/10 inch or 10 characters -# per inch); at 70 dots per inch horizontally this means 7 -# dots per character. -# Set vertical and horizontal tab stops at the upper left corner -# of the image, then tab to the upper left corner. -# Note: $<> is a true null (only works with special Curses routine). -# THIS ASSUMES WE START AT THE TOP OF THE PAGE! (although -# maybe not in the first column.) - defbi=%?%p5%{1}%=%t\En^B\E1^R\EB%p2%{8}%/%c$<>\ED%p1%{7}%/%c$<>\013\r\t%;, - - binel=\n\r\t, - - bicr=\r\t, - - use=ibmg+low, - -# -# Graphics capabilities (low resolution, 9-pin, 1:1 aspect ratio): -# -ibmc+low+1x1, - - spinh#84, - -# Set 1:1 aspect ratio. -# Set the line spacing to 7/72 inch (10.29 lines per inch) -# to get approximately 84 dots per inch vertically -# (10.29 lines/inch * 8 pins/line equals 82.28 dots per inch). -# Set the character spacing to pica (1/10 inch or 10 characters -# per inch); at 84 dots per inch horizontally this means 8.4 -# dots per character. -# Set vertical and horizontal tab stops at the upper left corner -# of the image, then tab to the upper left corner. -# Note: $<> is a true null (only works with special Curses routine). -# THIS ASSUMES WE START AT THE TOP OF THE PAGE! (although -# maybe not in the first column.) - defbi=%?%p5%{1}%=%t\En^A\E1^R\EB%p2%{8}%/%c$<>\ED%p1%{10}%*%{84}%/%c$<>\013\r\t%;, - - use=ibmc+low+5x6, - -# -# Color capability: -# -ibmc+color, - - colors#3, - - setcolor=%?%p1%{0}%=%t\Eb%;%?%p1%{1}%=%t\Ec%;%?%p1%{2}%=%t\Em%;%?%p1%{3}%=%t\Ey%;, - - colornm=%?%p1%{0}%=%tblack%;%?%p1%{1}%=%tcyan%;%?%p1%{2}%=%tmagenta%;%?%p1%{3}%=%tyellow%;%?%p1%{4}%=%torange=yellow+magenta%;%?%p1%{5}%=%tgreen=yellow+cyan%;%?%p1%{6}%=%tviolet=magenta+cyan%;%?%p1%{7}%=%tbrown=magenta+black%;, - -################################### -# -# IBM Proprinter XL: -# -# This printer appears to be a superset of the IBM Graphics -# and IBM Color printers, with a 24-wire printhead. The entry -# below uses the full capabilities of the superset and printhead. -# The printer has an Alternate Graphics Mode (AGM) that changes -# the vertical resolution from 1/216" to 1/180", and the graphics -# aspect ratio from 5:6 to 1:1. HOWEVER, there does not appear to -# be a control sequence that switches into this mode--it must be -# done by hand! -# - -# -# Basic capabilities (printer not in AGM): -# -ibmxl+basic, - - orc#12, - orhi#120, - orl#36, - orvi#216, - - cub1=\b, - - cpi=%?%p1%{10}%=%t^R%e%p1%{12}%=%t\E:%e%p1%{17}%=%t^O%;, - cvr=%?%p1%{0}%>%p1%{256}%<%&%t\E3%p1%c%;, - - is1=^Q^X, - is2=^R\EP0\EA\014\E2\EC\102\EO\ER\Eb\E50\EF\EH\EW0\ET\E-0\E_0\E7, - is3=\EX\001\120, - - use=ibmg+basic, - -# -# Basic capabilities (printer in AGM): -# -ibmxlagm+basic, - - orl#30, - orvi#180, - - is2=^R\EP0\EA\012\E2\EC\102\EO\ER\Eb\E50\EF\EH\EW0\ET\E-0\E_0\E7, - - use=ibmxl+basic, - -# -# Graphics capabilities (low resolution, 8-pin, 5:6 aspect ratio): -# -ibmxl+low+5x6, - - spinv#72, - spinh#60, - -# Set the line spacing to 8/72 inch (9 lines per inch) -# to get 72 dots per inch vertically (9 lines/" * 8 pins/line). -# Set the character spacing to pica (1/10 inch or 10 characters -# per inch); at 60 dots per inch horizontally this means 6 -# dots per character. -# Set vertical and horizontal tab stops at the upper left corner -# of the image, then tab to the upper left corner. -# Note: $<> is a true null (only works with special Curses routine). -# THIS ASSUMES WE START AT THE TOP OF THE PAGE! (although -# maybe not in the first column.) - defbi=%?%p5%{1}%=%t\EA\010\E2^R\EB%p2%{8}%/%c$<>\ED%p1%{6}%/%c$<>\013\r\t%;, - - use=ibmc+low+5x6, - -# -# Graphics capabilities (low resolution, 8-pin, 1:1 aspect ratio): -# -ibmxl+low+1x1, - - spinv#60, - -# In AGM the "defbi" cap from ibmxl+low+5x6 will work. The -# line spacing will be 8/60 inch to get 60 dots per inch, using -# the same control sequence. - - use=ibmxl+low+5x6, - -# -# Graphics capabilities (high resolution, 24-pin, 5:6 aspect ratio): -# -# This doesn't work as the pin spacing doesn't get set to -# 1/216 inch, but stays at 1/180 inch, even out of AGM. -# - -# -# Graphics capabilities (high resolution, 24-pin, 1:1 aspect ratio): -# -ibmxl+high+1x1, - - npins#24, - spinv#180, - spinh#180, - - porder=1\,2\,3\,4\,5\,6\,7\,8\,9\,10\,11\,12\,13\,14\,15\,16\,17\,18\,19\,20\,21\,22\,23\,24;0, - - sbim=\E*\047%p1%{256}%m%c%p1%{256}%/%c, - -# Set the line spacing to 8/60 inch (7.5 lines per inch) -# to get 180 dots per inch vertically (7.5 lines/" * 24 pins/line). -# This requires the printer or emulation in Alternate Graphics Mode. -# Set the character spacing to pica (1/10 inch or 10 characters -# per inch); at 180 dots per inch horizontally this means 18 -# dots per character. -# Set vertical and horizontal tab stops at the upper left corner -# of the image, then tab to the upper left corner. -# Note: $<> is a true null (only works with special Curses routine). -# THIS ASSUMES WE START AT THE TOP OF THE PAGE! (although -# maybe not in the first column.) - defbi=%?%p5%{1}%=%t\EA\010\E2^R\EB%p2%{24}%/%c$<>\ED%p1%{18}%/%c$<>\013\r\t%;, - - use=ibmc+low+5x6, - -###################################################################### -# -# Specific printers: -# - -ibmgraphics|ibmproprinter|proprinter|IBM Graphics printer, - - use=ibmg+basic, use=ibmg+low, - -ibmcolor|IBM Color printer; 5:6 aspect ratio, - - use=ibmc+basic, use=ibmc+low+5x6, use=ibmc+color, - -ibmcolor-1x1|IBM Color printer; 1:1 aspect ratio, - - use=ibmc+basic, use=ibmc+low+1x1, use=ibmc+color, - -ibmxl|IBM Proprinter XL; 5:6 aspect ratio; low resolution, - - cols#136, - is3=\EX\001\210, - use=ibmxl+basic, use=ibmxl+low+5x6, use=ibmc+color, - -ibmxl-1x1|IBM Proprinter XL in AGM; 1:1 aspect ratio; low resolution, - - cols#136, - is3=\EX\001\210, - use=ibmxlagm+basic, use=ibmxl+low+1x1, use=ibmc+color, - -ibmxl-1x1-hi|IBM Proprinter XL in AGM; 1:1 aspect ratio; high resolution, - - cols#136, - is3=\EX\001\210, - use=ibmxlagm+basic, use=ibmxl+high+1x1, use=ibmc+color, - -ibmxl-80|IBM Proprinter XL; 5:6 aspect ratio; low resolution; 80-col, - - use=ibmxl+basic, use=ibmxl+low+5x6, use=ibmc+color, - -ibmxl-1x1-80|IBM Proprinter XL in AGM; 1:1 aspect ratio; low res; 80-col, - - use=ibmxlagm+basic, use=ibmxl+low+1x1, use=ibmc+color, - -ibmxl-1x1-hi80|IBM Proprinter XL in AGM; 1:1 aspect ratio; high res; 80-col, - - use=ibmxlagm+basic, use=ibmxl+high+1x1, use=ibmc+color, - -############################################################## -# -# HP plotter: -# - -7550|hp7550|HP7550|Hewlett Packard 7550A, - bufsz#5000, - is2=.@5000;2:.I81;;17:.NO;19:.P;1:.(, |