diff options
Diffstat (limited to 'usr/src/cmd/varpd')
| -rw-r--r-- | usr/src/cmd/varpd/Makefile | 74 | ||||
| -rw-r--r-- | usr/src/cmd/varpd/svc-varpd | 32 | ||||
| -rw-r--r-- | usr/src/cmd/varpd/varpd.c | 526 | ||||
| -rw-r--r-- | usr/src/cmd/varpd/varpd.xml | 60 |
4 files changed, 692 insertions, 0 deletions
diff --git a/usr/src/cmd/varpd/Makefile b/usr/src/cmd/varpd/Makefile new file mode 100644 index 0000000000..215f23d29e --- /dev/null +++ b/usr/src/cmd/varpd/Makefile @@ -0,0 +1,74 @@ +# +# This file and its contents are supplied under the terms of the +# Common Development and Distribution License ("CDDL"), version 1.0. +# You may only use this file in accordance with the terms of version +# 1.0 of the CDDL. +# +# A full copy of the text of the CDDL should have accompanied this +# source. A copy of the CDDL is also available via the Internet at +# http://www.illumos.org/license/CDDL. +# + +# +# Copyright 2015 Joyent, Inc. +# + +PROG= varpd +OBJS = varpd.o +SRCS = $(OBJS:%.o=../%.c) +SVCMETHOD = svc-varpd +MANIFEST = varpd.xml +ROOTLIBVARPD = $(ROOTLIB)/varpd +ROOTLIBVARPDPROG= $(PROG:%=$(ROOTLIBVARPD)/%) + + +include ../Makefile.cmd +include ../Makefile.ctf + +ROOTMANIFESTDIR= $(ROOTSVCNETWORK) + +CLEANFILES += $(OBJS) +CPPFLAGS += -D_REENTRANT +CFLAGS += $(CCVERBOSE) +LDLIBS += -lvarpd -lumem -lscf +$(NOT_RELEASE_BUILD)CPPFLAGS += -DDEBUG + +# +# Our debug only umem related functions cause lint to get confused. +# +LINTFLAGS += -erroff=E_NAME_DEF_NOT_USED2 + +C99MODE= -xc99=%all +C99LMODE= -Xc99=%all + +.KEEP_STATE: + +$(PROG): $(OBJS) + $(LINK.c) -o $@ $(OBJS) $(LDLIBS) + $(POST_PROCESS) + +clean: + -$(RM) $(CLEANFILES) + +lint: lint_PROG + +%.o: ../%.c + $(COMPILE.c) $< + $(POST_PROCESS_O) + +check: $(CHKMANIFEST) + +clobber: clean + $(RM) $(PROG) + +install: $(PROG) $(ROOTLIBVARPDPROG) $(ROOTMANIFEST) $(ROOTSVCMETHOD) + +$(ROOTLIBVARPD): + $(INS.dir) + +$(ROOTLIBVARPD)/%: % $(ROOTLIBVARPD) + $(INS.file) + +FRC: + +include ../Makefile.targ diff --git a/usr/src/cmd/varpd/svc-varpd b/usr/src/cmd/varpd/svc-varpd new file mode 100644 index 0000000000..c7483a033e --- /dev/null +++ b/usr/src/cmd/varpd/svc-varpd @@ -0,0 +1,32 @@ +#!/usr/bin/sh +# +# +# This file and its contents are supplied under the terms of the +# Common Development and Distribution License ("CDDL"), version 1.0. +# You may only use this file in accordance with the terms of version +# 1.0 of the CDDL. +# +# A full copy of the text of the CDDL should have accompanied this +# source. A copy of the CDDL is also available via the Internet at +# http://www.illumos.org/license/CDDL. +# + +# +# Copyright 2015 Joyent, Inc. +# + +. /lib/svc/share/smf_include.sh + +# +# For the time being, we're going to manually make sure that the +# overlay driver is loaded. We probably shouldn't do that in the long +# run, but it helps for bootstrapping +# +add_drv overlay 2>/dev/null + +/usr/lib/varpd/varpd +if [ $? = 0 ]; then + exit $SMF_EXIT_OK +else + exit $SMF_EXIT_ERR_FATAL +fi diff --git a/usr/src/cmd/varpd/varpd.c b/usr/src/cmd/varpd/varpd.c new file mode 100644 index 0000000000..8131604537 --- /dev/null +++ b/usr/src/cmd/varpd/varpd.c @@ -0,0 +1,526 @@ +/* + * This file and its contents are supplied under the terms of the + * Common Development and Distribution License ("CDDL"), version 1.0. + * You may only use this file in accordance with the terms of version + * 1.0 of the CDDL. + * + * A full copy of the text of the CDDL should have accompanied this + * source. A copy of the CDDL is also available via the Internet at + * http://www.illumos.org/license/CDDL. + */ + +/* + * Copyright (c) 2015 Joyent, Inc. + */ + +/* + * virtual arp daemon -- varpd + * + * The virtual arp daemon is the user land counterpart to the overlay driver. To + * truly understand its purpose and how it fits into things, you should read the + * overlay big theory statement in uts/common/io/overlay/overlay.c. + * + * varod's purpose it to provide a means for looking up the destination on the + * underlay network for a host on an overlay network and to also be a door + * server such that dladm(1M) via libdladm can configure and get useful status + * information. The heavy lifting is all done by libvarpd and the various lookup + * plugins. + * + * When varpd first starts up, we take of chdiring into /var/run/varpd, which is + * also where we create /var/run/varpd.door, our door server. After that we + * daemonize and only after we daemonize do we go ahead and load plugins. The + * reason that we don't load plugins before daemonizing is that they could very + * well be creating threads and thus lose them all. In general, we want to make + * things easier on our children and not require them to be fork safe. + * + * Once it's spun up, the main varpd thread sits in sigsuspend and really just + * hangs out waiting for something, libvarpd handles everything else. + */ + +#include <libvarpd.h> +#include <stdio.h> +#include <unistd.h> +#include <string.h> +#include <signal.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <errno.h> +#include <libgen.h> +#include <stdarg.h> +#include <stdlib.h> +#include <paths.h> +#include <limits.h> +#include <sys/corectl.h> +#include <signal.h> +#include <strings.h> +#include <sys/wait.h> +#include <unistd.h> +#include <thread.h> +#include <priv.h> +#include <libscf.h> + +#define VARPD_EXIT_REQUESTED 0 +#define VARPD_EXIT_FATAL 1 +#define VARPD_EXIT_USAGE 2 + +#define VARPD_RUNDIR "/var/run/varpd" +#define VARPD_DEFAULT_DOOR "/var/run/varpd/varpd.door" + +#define VARPD_PG "varpd" +#define VARPD_PROP_INC "include_path" + +static varpd_handle_t *varpd_handle; +static const char *varpd_pname; +static volatile boolean_t varpd_exit = B_FALSE; + +/* + * Debug builds are automatically wired up for umem debugging. + */ +#ifdef DEBUG +const char * +_umem_debug_init() +{ + return ("default,verbose"); +} + +const char * +_umem_logging_init(void) +{ + return ("fail,contents"); +} +#endif /* DEBUG */ + +static void +varpd_vwarn(FILE *out, const char *fmt, va_list ap) +{ + int error = errno; + + (void) fprintf(out, "%s: ", varpd_pname); + (void) vfprintf(out, fmt, ap); + + if (fmt[strlen(fmt) - 1] != '\n') + (void) fprintf(out, ": %s\n", strerror(error)); +} + +static void +varpd_fatal(const char *fmt, ...) +{ + va_list ap; + + va_start(ap, fmt); + varpd_vwarn(stderr, fmt, ap); + va_end(ap); + + exit(VARPD_EXIT_FATAL); +} + +static void +varpd_dfatal(int dfd, const char *fmt, ...) +{ + int status = VARPD_EXIT_FATAL; + va_list ap; + + va_start(ap, fmt); + varpd_vwarn(stdout, fmt, ap); + va_end(ap); + + /* Take a single shot at this */ + (void) write(dfd, &status, sizeof (status)); + exit(status); +} + +/* ARGSUSED */ +static int +varpd_plugin_walk_cb(varpd_handle_t *vph, const char *name, void *unused) +{ + (void) printf("loaded %s!\n", name); + return (0); +} + +static int +varpd_dir_setup(void) +{ + int fd; + + if (mkdir(VARPD_RUNDIR, 0700) != 0) { + if (errno != EEXIST) + varpd_fatal("failed to create %s: %s", VARPD_RUNDIR, + strerror(errno)); + } + + fd = open(VARPD_RUNDIR, O_RDONLY); + if (fd < 0) + varpd_fatal("failed to open %s: %s", VARPD_RUNDIR, + strerror(errno)); + + if (fchown(fd, UID_NETADM, GID_NETADM) != 0) + varpd_fatal("failed to chown %s: %s\n", VARPD_RUNDIR, + strerror(errno)); + + return (fd); +} + +/* + * Because varpd is generally run under SMF, we opt to keep its stdout and + * stderr to be whatever our parent set them up to be. + */ +static void +varpd_fd_setup(void) +{ + int dupfd; + + closefrom(STDERR_FILENO + 1); + dupfd = open(_PATH_DEVNULL, O_RDONLY); + if (dupfd < 0) + varpd_fatal("failed to open %s: %s", _PATH_DEVNULL, + strerror(errno)); + if (dup2(dupfd, STDIN_FILENO) == -1) + varpd_fatal("failed to dup out stdin: %s", strerror(errno)); +} + +/* + * We borrow fmd's daemonization style. Basically, the parent waits for the + * child to successfully set up a door and recover all of the old configurations + * before we say that we're good to go. + */ +static int +varpd_daemonize(int dirfd) +{ + char path[PATH_MAX]; + struct rlimit rlim; + sigset_t set, oset; + int estatus, pfds[2]; + pid_t child; + priv_set_t *pset; + + /* + * Set a per-process core path to be inside of /var/run/varpd. Make sure + * that we aren't limited in our dump size. + */ + (void) snprintf(path, sizeof (path), + "/var/run/varpd/core.%s.%%p", varpd_pname); + (void) core_set_process_path(path, strlen(path) + 1, getpid()); + + rlim.rlim_cur = RLIM_INFINITY; + rlim.rlim_max = RLIM_INFINITY; + (void) setrlimit(RLIMIT_CORE, &rlim); + + /* + * Claim as many file descriptors as the system will let us. + */ + if (getrlimit(RLIMIT_NOFILE, &rlim) == 0) { + rlim.rlim_cur = rlim.rlim_max; + (void) setrlimit(RLIMIT_NOFILE, &rlim); + } + + /* + * chdir /var/run/varpd + */ + if (fchdir(dirfd) != 0) + varpd_fatal("failed to chdir to %s", VARPD_RUNDIR); + + + /* + * At this point block all signals going in so we don't have the parent + * mistakingly exit when the child is running, but never block SIGABRT. + */ + if (sigfillset(&set) != 0) + abort(); + if (sigdelset(&set, SIGABRT) != 0) + abort(); + if (sigprocmask(SIG_BLOCK, &set, &oset) != 0) + abort(); + + /* + * Do the fork+setsid dance. + */ + if (pipe(pfds) != 0) + varpd_fatal("failed to create pipe for daemonizing"); + + if ((child = fork()) == -1) + varpd_fatal("failed to fork for daemonizing"); + + if (child != 0) { + /* We'll be exiting shortly, so allow for silent failure */ + (void) close(pfds[1]); + if (read(pfds[0], &estatus, sizeof (estatus)) == + sizeof (estatus)) + _exit(estatus); + + if (waitpid(child, &estatus, 0) == child && WIFEXITED(estatus)) + _exit(WEXITSTATUS(estatus)); + + _exit(VARPD_EXIT_FATAL); + } + + /* + * Drop privileges here. + * + * We should make sure we keep around PRIV_NET_PRIVADDR and + * PRIV_SYS_DLCONFIG, but drop everything else; however, keep basic + * privs and have our child drop them. + * + * We should also run as netadm:netadm and drop all of our groups. + */ + if (setgroups(0, NULL) != 0) + abort(); + if (setgid(GID_NETADM) == -1 || seteuid(UID_NETADM) == -1) + abort(); + if ((pset = priv_allocset()) == NULL) + abort(); + priv_basicset(pset); + if (priv_delset(pset, PRIV_PROC_EXEC) == -1 || + priv_delset(pset, PRIV_PROC_INFO) == -1 || + priv_delset(pset, PRIV_PROC_FORK) == -1 || + priv_delset(pset, PRIV_PROC_SESSION) == -1 || + priv_delset(pset, PRIV_FILE_LINK_ANY) == -1 || + priv_addset(pset, PRIV_SYS_DL_CONFIG) == -1 || + priv_addset(pset, PRIV_NET_PRIVADDR) == -1) { + abort(); + } + /* + * Remove privs from the permitted set. That will cause them to be + * removed from the effective set. We want to make sure that in the case + * of a vulnerability, something can't get back in here and wreak more + * havoc. But if we want non-basic privs in the effective set, we have + * to request them explicitly. + */ + if (setppriv(PRIV_SET, PRIV_PERMITTED, pset) == -1) + abort(); + if (setppriv(PRIV_SET, PRIV_EFFECTIVE, pset) == -1) + abort(); + + priv_freeset(pset); + + if (close(pfds[0]) != 0) + abort(); + if (setsid() == -1) + abort(); + if (sigprocmask(SIG_SETMASK, &oset, NULL) != 0) + abort(); + (void) umask(0022); + + return (pfds[1]); +} + +static int +varpd_setup_lookup_threads(void) +{ + int ret; + long i, ncpus = sysconf(_SC_NPROCESSORS_ONLN) * 2 + 1; + + if (ncpus <= 0) + abort(); + for (i = 0; i < ncpus; i++) { + thread_t thr; + + ret = thr_create(NULL, 0, + (void *(*)(void *))libvarpd_overlay_lookup_run, + varpd_handle, THR_DETACHED | THR_DAEMON, &thr); + if (ret != 0) + return (ret); + } + + return (0); +} + +static void +varpd_cleanup(void) +{ + varpd_exit = B_TRUE; +} + +/* + * Load default information from SMF and apply any of if necessary. We recognize + * the following properties: + * + * varpd/include_path Treat these as a series of -i options. + * + * If we're not under SMF, just move on. + */ +static void +varpd_load_smf(int dfd) +{ + char *fmri, *inc; + scf_simple_prop_t *prop; + + if ((fmri = getenv("SMF_FMRI")) == NULL) + return; + + if ((prop = scf_simple_prop_get(NULL, fmri, VARPD_PG, + VARPD_PROP_INC)) == NULL) + return; + + while ((inc = scf_simple_prop_next_astring(prop)) != NULL) { + int err = libvarpd_plugin_load(varpd_handle, inc); + if (err != 0) { + varpd_dfatal(dfd, "failed to load from %s: %s\n", + inc, strerror(err)); + } + } + + scf_simple_prop_free(prop); +} + +/* + * There are a bunch of things we need to do to be a proper daemon here. + * + * o Ensure that /var/run/varpd exists or create it + * o make stdin /dev/null (stdout?) + * o Ensure any other fds that we somehow inherited are closed, eg. + * closefrom() + * o Properly daemonize + * o Mask all signals except sigabrt before creating our first door -- all + * other doors will inherit from that. + * o Have the main thread sigsuspend looking for most things that are + * actionable... + */ +int +main(int argc, char *argv[]) +{ + int err, c, dirfd, dfd, i; + const char *doorpath = VARPD_DEFAULT_DOOR; + sigset_t set; + struct sigaction act; + int nincpath = 0, nextincpath = 0; + char **incpath = NULL; + + varpd_pname = basename(argv[0]); + + /* + * We want to clean up our file descriptors before we do anything else + * as we can't assume that libvarpd won't open file descriptors, etc. + */ + varpd_fd_setup(); + + if ((err = libvarpd_create(&varpd_handle)) != 0) { + varpd_fatal("failed to open a libvarpd handle"); + return (1); + } + + while ((c = getopt(argc, argv, ":i:d:")) != -1) { + switch (c) { + case 'i': + if (nextincpath == nincpath) { + if (nincpath == 0) + nincpath = 16; + else + nincpath *= 2; + incpath = realloc(incpath, sizeof (char *) * + nincpath); + if (incpath == NULL) { + (void) fprintf(stderr, "failed to " + "allocate memory for the %dth " + "-I option: %s\n", nextincpath + 1, + strerror(errno)); + } + + } + incpath[nextincpath] = optarg; + nextincpath++; + break; + case 'd': + doorpath = optarg; + break; + default: + (void) fprintf(stderr, "unknown option: %c\n", c); + return (1); + } + } + + dirfd = varpd_dir_setup(); + + (void) libvarpd_plugin_walk(varpd_handle, varpd_plugin_walk_cb, NULL); + + dfd = varpd_daemonize(dirfd); + + /* + * Now that we're in the child, go ahead and load all of our plug-ins. + * We do this, in part, because these plug-ins may need threads of their + * own and fork won't preserve those and we'd rather the plug-ins don't + * have to learn about fork-handlers. + */ + for (i = 0; i < nextincpath; i++) { + err = libvarpd_plugin_load(varpd_handle, incpath[i]); + if (err != 0) { + varpd_dfatal(dfd, "failed to load from %s: %s\n", + incpath[i], strerror(err)); + } + } + + varpd_load_smf(dfd); + + if ((err = libvarpd_persist_enable(varpd_handle, VARPD_RUNDIR)) != 0) + varpd_dfatal(dfd, "failed to enable varpd persistence: %s\n", + strerror(err)); + + if ((err = libvarpd_persist_restore(varpd_handle)) != 0) + varpd_dfatal(dfd, "failed to enable varpd persistence: %s\n", + strerror(err)); + + /* + * The ur-door thread will inherit from this signal mask. So set it to + * what we want before doing anything else. In addition, so will our + * threads that handle varpd lookups. + */ + if (sigfillset(&set) != 0) + varpd_dfatal(dfd, "failed to fill a signal set..."); + + if (sigdelset(&set, SIGABRT) != 0) + varpd_dfatal(dfd, "failed to unmask SIGABRT"); + + if (sigprocmask(SIG_BLOCK, &set, NULL) != 0) + varpd_dfatal(dfd, "failed to set our door signal mask"); + + if ((err = varpd_setup_lookup_threads()) != 0) + varpd_dfatal(dfd, "failed to create lookup threads: %s\n", + strerror(err)); + + if ((err = libvarpd_door_server_create(varpd_handle, doorpath)) != 0) + varpd_dfatal(dfd, "failed to create door server at %s: %s\n", + doorpath, strerror(err)); + + /* + * At this point, finish up signal intialization and finally go ahead, + * notify the parent that we're okay, and enter the sigsuspend loop. + */ + bzero(&act, sizeof (struct sigaction)); + act.sa_handler = varpd_cleanup; + if (sigfillset(&act.sa_mask) != 0) + varpd_dfatal(dfd, "failed to fill sigaction mask"); + act.sa_flags = 0; + if (sigaction(SIGHUP, &act, NULL) != 0) + varpd_dfatal(dfd, "failed to register HUP handler"); + if (sigdelset(&set, SIGHUP) != 0) + varpd_dfatal(dfd, "failed to remove HUP from mask"); + if (sigaction(SIGQUIT, &act, NULL) != 0) + varpd_dfatal(dfd, "failed to register QUIT handler"); + if (sigdelset(&set, SIGQUIT) != 0) + varpd_dfatal(dfd, "failed to remove QUIT from mask"); + if (sigaction(SIGINT, &act, NULL) != 0) + varpd_dfatal(dfd, "failed to register INT handler"); + if (sigdelset(&set, SIGINT) != 0) + varpd_dfatal(dfd, "failed to remove INT from mask"); + if (sigaction(SIGTERM, &act, NULL) != 0) + varpd_dfatal(dfd, "failed to register TERM handler"); + if (sigdelset(&set, SIGTERM) != 0) + varpd_dfatal(dfd, "failed to remove TERM from mask"); + + err = 0; + (void) write(dfd, &err, sizeof (err)); + (void) close(dfd); + + for (;;) { + if (sigsuspend(&set) == -1) + if (errno == EFAULT) + abort(); + if (varpd_exit == B_TRUE) + break; + } + + libvarpd_door_server_destroy(varpd_handle); + libvarpd_destroy(varpd_handle); + + return (VARPD_EXIT_REQUESTED); +} diff --git a/usr/src/cmd/varpd/varpd.xml b/usr/src/cmd/varpd/varpd.xml new file mode 100644 index 0000000000..0a9201e90d --- /dev/null +++ b/usr/src/cmd/varpd/varpd.xml @@ -0,0 +1,60 @@ +<?xml version="1.0"?> +<!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1"> +<!-- +This file and its contents are supplied under the terms of the +Common Development and Distribution License ("CDDL"), version 1.0. +You may only use this file in accordance with the terms of version +1.0 of the CDDL. + +A full copy of the text of the CDDL should have accompanied this +source. A copy of the CDDL is also available via the Internet at +http://www.illumos.org/license/CDDL. + +Copyright 2015, Joyent, Inc. +--> + +<service_bundle type="manifest" name="illumos:varpd" > + + <service name="network/varpd" type="service" version="1" > + + <create_default_instance enabled="true" /> + + <single_instance/> + + <dependency name="varpd-network-physical" + grouping="require_all" + restart_on="none" + type="service"> + <service_fmri value="svc:/network/physical:default" /> + </dependency> + + <exec_method + type="method" + name="start" + exec="/lib/svc/method/svc-varpd" + timeout_seconds="60" /> + + <exec_method + type="method" + name="stop" + exec=":kill" + timeout_seconds="10" /> + + <property_group name='varpd' type='application'> + <property name='include_path' type='astring'> + <astring_list> + <value_node value='/usr/lib/varpd'/> + </astring_list> + </property> + </property_group> + + <stability value='Unstable' /> + + <template> + <common_name> + <loctext xml:lang="C">virtual ARP daemon + </loctext> + </common_name> + </template> + </service> +</service_bundle> |