diff options
Diffstat (limited to 'usr/src/cmd')
| -rw-r--r-- | usr/src/cmd/Makefile | 2 | ||||
| -rw-r--r-- | usr/src/cmd/wusbadm/Makefile | 70 | ||||
| -rw-r--r-- | usr/src/cmd/wusbadm/crypto_util.c | 175 | ||||
| -rw-r--r-- | usr/src/cmd/wusbadm/crypto_util.h | 96 | ||||
| -rw-r--r-- | usr/src/cmd/wusbadm/svc-wusb | 73 | ||||
| -rw-r--r-- | usr/src/cmd/wusbadm/wusb.xml | 107 | ||||
| -rw-r--r-- | usr/src/cmd/wusbadm/wusbadm.c | 1481 | ||||
| -rw-r--r-- | usr/src/cmd/wusbadm/wusbd.c | 2578 | ||||
| -rw-r--r-- | usr/src/cmd/wusbadm/wusbd.h | 105 |
9 files changed, 0 insertions, 4687 deletions
diff --git a/usr/src/cmd/Makefile b/usr/src/cmd/Makefile index 16750703b5..f54e0f9c4b 100644 --- a/usr/src/cmd/Makefile +++ b/usr/src/cmd/Makefile @@ -447,7 +447,6 @@ COMMON_SUBDIRS= \ whodo \ wracct \ write \ - wusbadm \ xargs \ xstr \ yes \ @@ -723,7 +722,6 @@ MSGSUBDIRS= \ whodo \ wracct \ write \ - wusbadm \ xargs \ yppasswd \ zdump \ diff --git a/usr/src/cmd/wusbadm/Makefile b/usr/src/cmd/wusbadm/Makefile deleted file mode 100644 index b01e042b12..0000000000 --- a/usr/src/cmd/wusbadm/Makefile +++ /dev/null @@ -1,70 +0,0 @@ -# -# CDDL HEADER START -# -# The contents of this file are subject to the terms of the -# Common Development and Distribution License (the "License"). -# You may not use this file except in compliance with the License. -# -# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE -# or http://www.opensolaris.org/os/licensing. -# See the License for the specific language governing permissions -# and limitations under the License. -# -# When distributing Covered Code, include this CDDL HEADER in each -# file and include the License file at usr/src/OPENSOLARIS.LICENSE. -# If applicable, add the following below this CDDL HEADER, with the -# fields enclosed by brackets "[]" replaced with your own identifying -# information: Portions Copyright [yyyy] [name of copyright owner] -# -# CDDL HEADER END -# -# -# Copyright 2009 Sun Microsystems, Inc. All rights reserved. -# Use is subject to license terms. -# -# - -PROG= wusbadm -MANIFEST= wusb.xml -SVCMETHOD= svc-wusb - -include ../Makefile.cmd - -ROOTMANIFESTDIR= $(ROOTSVCSYSTEM) - -OBJS= wusbadm.o wusbd.o crypto_util.o -SRCS= $(OBJS:%.o=%.c) -POFILE= wusbadm_all.po -POFILES=$(OBJS:%.o=%.po) - - -CPPFLAGS += -I$(SRC)/uts/common -LDLIBS += -lpkcs11 -lkmf -lsysevent -lnvpair -lsecdb - -.KEEP_STATE: - -all: $(PROG) - -$(PROG): $(OBJS) - $(LINK.c) -o $@ $(OBJS) $(LDLIBS) - $(POST_PROCESS) - -install: all $(ROOTSBINPROG) $(ROOTMANIFEST) $(ROOTSVCMETHOD) - $(RM) $(ROOTUSRSBINPROG) - -$(SYMLINK) ../../sbin/$(PROG) $(ROOTUSRSBINPROG) - $(RM) $(ROOTLIB)/wusbd - -$(SYMLINK) ../../sbin/$(PROG) $(ROOTLIB)/wusbd - -check: $(PROG).c $(CHKMANIFEST) - $(CSTYLE) -pP $(SRCS:%=%) - -$(POFILE): $(POFILES) - $(RM) $@ - $(CAT) $(POFILES) > $@ - -clean: - $(RM) $(PROG) $(OBJS) $(POFILES) - -lint: lint_SRCS - -include ../Makefile.targ diff --git a/usr/src/cmd/wusbadm/crypto_util.c b/usr/src/cmd/wusbadm/crypto_util.c deleted file mode 100644 index 5bf42a73b8..0000000000 --- a/usr/src/cmd/wusbadm/crypto_util.c +++ /dev/null @@ -1,175 +0,0 @@ -/* - * CDDL HEADER START - * - * The contents of this file are subject to the terms of the - * Common Development and Distribution License (the "License"). - * You may not use this file except in compliance with the License. - * - * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE - * or http://www.opensolaris.org/os/licensing. - * See the License for the specific language governing permissions - * and limitations under the License. - * - * When distributing Covered Code, include this CDDL HEADER in each - * file and include the License file at usr/src/OPENSOLARIS.LICENSE. - * If applicable, add the following below this CDDL HEADER, with the - * fields enclosed by brackets "[]" replaced with your own identifying - * information: Portions Copyright [yyyy] [name of copyright owner] - * - * CDDL HEADER END - */ -/* - * Copyright 2009 Sun Microsystems, Inc. All rights reserved. - * Use is subject to license terms. - */ - - -#include <stdlib.h> -#include <stdio.h> -#include <string.h> -#include <strings.h> -#include <sys/param.h> -#include <pwd.h> -#include <nss_dbdefs.h> -#include <auth_attr.h> -#include "crypto_util.h" - -/* init kmf handle and pkcs11 handle, for cc creation */ -int -wusb_crypto_init( - KMF_HANDLE_T *kmfhandle, - CK_SESSION_HANDLE *pkhandle, - const char *pktoken, - const char *tokendir) -{ - KMF_KEYSTORE_TYPE kstype = KMF_KEYSTORE_PK11TOKEN; - boolean_t bfalse = FALSE; - KMF_ATTRIBUTE attrlist[20]; - int numattr; - - /* change default softtoken directory */ - if (setenv("SOFTTOKEN_DIR", tokendir, 1) != 0) { - - return (-1); - } - - /* init kmf */ - if (kmf_initialize(kmfhandle, NULL, NULL) != KMF_OK) { - - return (-1); - } - - numattr = 0; - kmf_set_attr_at_index(attrlist, numattr++, - KMF_KEYSTORE_TYPE_ATTR, &kstype, sizeof (kstype)); - kmf_set_attr_at_index(attrlist, numattr++, - KMF_TOKEN_LABEL_ATTR, (void *)pktoken, strlen(pktoken) + 1); - kmf_set_attr_at_index(attrlist, numattr++, - KMF_READONLY_ATTR, &bfalse, sizeof (bfalse)); - - if (kmf_configure_keystore(*kmfhandle, numattr, attrlist) != KMF_OK) { - - return (-1); - } - - /* get pkcs11 handle from kmf */ - *pkhandle = kmf_get_pk11_handle(*kmfhandle); - if (*pkhandle == NULL) { - - return (-1); - } - - return (0); -} - -void -wusb_crypto_fini(KMF_HANDLE_T kmfhandle) -{ - (void) kmf_finalize(kmfhandle); -} - -/* random generation, for cc creation */ -int -wusb_random( - CK_SESSION_HANDLE hSession, - CK_BYTE *seed, size_t slen, - CK_BYTE *rand, size_t rlen) -{ - hrtime_t hrt; - - if (seed == NULL) { - hrt = gethrtime() + gethrvtime(); - if (C_SeedRandom(hSession, (CK_BYTE *)&hrt, - sizeof (hrt)) != CKR_OK) { - - return (-1); - } - } else { - if (C_SeedRandom(hSession, seed, slen) != CKR_OK) { - - return (-1); - } - } - - if (C_GenerateRandom(hSession, rand, rlen) != CKR_OK) { - - return (-1); - } - - return (0); -} - - -/* conver mac address to label string */ -void -mac_to_label(uint8_t *mac, char *label) -{ - int i; - - bzero(label, WUSB_CC_LABEL_LENGTH); - for (i = 0; i < WUSB_DEV_MAC_LENGTH; i++) { - (void) snprintf(label, WUSB_CC_LABEL_LENGTH, - "%s%02x", label, mac[i]); - } -} - -/* ARGSUSED */ -/* For debug only, print an array of byte */ -void -print_array(const char *label, CK_BYTE *array, size_t len) -{ -#ifdef DEBUG - int i; - - fprintf(stdout, "%s :\n", label); - for (i = 0; i < len; i++) { - fprintf(stdout, "%02x ", array[i]); - if ((i & 15) == 15) fprintf(stdout, "\n"); - } -#endif -} - -/* Check if a uid has auths */ -int -chk_auths(uid_t uid, const char *auths) -{ - struct passwd pwd; - char buf[NSS_LINELEN_PASSWD]; - - - if (uid == (uid_t)-1) { - return (-1); - } - - /* get user name */ - if (getpwuid_r(uid, &pwd, buf, sizeof (buf)) == NULL) { - return (-1); - } - - /* check the auths */ - if (chkauthattr(auths, pwd.pw_name) != 1) { - return (-1); - } - return (0); - -} diff --git a/usr/src/cmd/wusbadm/crypto_util.h b/usr/src/cmd/wusbadm/crypto_util.h deleted file mode 100644 index 065130d9a8..0000000000 --- a/usr/src/cmd/wusbadm/crypto_util.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * CDDL HEADER START - * - * The contents of this file are subject to the terms of the - * Common Development and Distribution License (the "License"). - * You may not use this file except in compliance with the License. - * - * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE - * or http://www.opensolaris.org/os/licensing. - * See the License for the specific language governing permissions - * and limitations under the License. - * - * When distributing Covered Code, include this CDDL HEADER in each - * file and include the License file at usr/src/OPENSOLARIS.LICENSE. - * If applicable, add the following below this CDDL HEADER, with the - * fields enclosed by brackets "[]" replaced with your own identifying - * information: Portions Copyright [yyyy] [name of copyright owner] - * - * CDDL HEADER END - */ -/* - * Copyright 2009 Sun Microsystems, Inc. All rights reserved. - * Use is subject to license terms. - */ - -#ifndef _CRYPTO_UTIL_H -#define _CRYPTO_UTIL_H - - -#ifdef __cplusplus -extern "C" { -#endif - -#include <limits.h> -#include <security/cryptoki.h> -#include <security/pkcs11.h> -#include <kmfapi.h> - -#include <sys/usb/usba/wusba_io.h> - - -#define WUSB_DEV_MAC_LENGTH 6 -#define WUSB_CC_LABEL_LENGTH (WUSB_DEV_MAC_LENGTH * 2 + 1) -#define WUSB_TYPE_LEN 16 - -/* - * wusb_cc_info. - * Record the association information and it is - * saved at /etc/usb/wusbcc - */ -typedef struct wusb_cc_info { - uint8_t mac[WUSB_DEV_MAC_LENGTH]; - wusb_cc_t cc; /* cc info */ - char type[WUSB_TYPE_LEN]; /* device/host path */ - uint8_t host; /* Host id */ - uint16_t dev; /* Device id */ - char flag; /* Onetime/Always */ -} wusb_cc_info_t; - - -/* Device state definition */ -#define DEV_STAT_DISCONN 0x00 -#define DEV_STAT_CONNECT 0x01 - -/* wusbadm list structure */ -typedef struct wusb_cc_list { - struct wusb_cc_list *next; - wusb_cc_info_t info; /* cc info */ - uint8_t stat; /* host or device state */ -} wusb_cc_list_t; - -typedef struct wusb_device_info { - char type[WUSB_TYPE_LEN]; - uint8_t host; /* host id */ - uint16_t dev; /* device id */ - uint8_t stat; /* state */ -} wusb_device_info_t; - -/* cc generation functions */ -int wusb_crypto_init(KMF_HANDLE_T *, CK_SESSION_HANDLE *, - const char *, const char *); -void wusb_crypto_fini(KMF_HANDLE_T); - -int wusb_random(CK_SESSION_HANDLE, CK_BYTE *, size_t, CK_BYTE *, size_t); - - -void mac_to_label(uint8_t *, char *); - -void print_array(const char *, CK_BYTE *, size_t); - -int chk_auths(uid_t, const char *); -#ifdef __cplusplus -} -#endif - -#endif /* _CRYPTO_UTIL_H */ diff --git a/usr/src/cmd/wusbadm/svc-wusb b/usr/src/cmd/wusbadm/svc-wusb deleted file mode 100644 index 8b35144980..0000000000 --- a/usr/src/cmd/wusbadm/svc-wusb +++ /dev/null @@ -1,73 +0,0 @@ -#!/sbin/sh -# -# CDDL HEADER START -# -# The contents of this file are subject to the terms of the -# Common Development and Distribution License (the "License"). -# You may not use this file except in compliance with the License. -# -# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE -# or http://www.opensolaris.org/os/licensing. -# See the License for the specific language governing permissions -# and limitations under the License. -# -# When distributing Covered Code, include this CDDL HEADER in each -# file and include the License file at usr/src/OPENSOLARIS.LICENSE. -# If applicable, add the following below this CDDL HEADER, with the -# fields enclosed by brackets "[]" replaced with your own identifying -# information: Portions Copyright [yyyy] [name of copyright owner] -# -# CDDL HEADER END -# -# -# Copyright 2009 Sun Microsystems, Inc. All rights reserved. -# Use is subject to license terms. -# -# - -. /lib/svc/share/smf_include.sh - -RUN_OK=0 -CONFIG_ERROR=1 -FATAL_ERROR=2 - -PID_FILE=/var/run/wusbd/wusb.pid -DOOR_FILE=/var/run/wusbd/wusb_door - -case "$1" in -'start') - if smf_is_nonglobalzone; then - /usr/sbin/svcadm disable $SMF_FMRI - echo "$SMF_FMRI is not supported in a local zone" - sleep 5 & - exit $SMF_EXIT_OK - fi - - - [ ! -d /var/run/wusbd ] && /usr/bin/mkdir -m 755 /var/run/wusbd - - /usr/lib/wusbd --daemon - - if [ $? -eq $CONFIG_ERROR ]; then - exit $SMF_EXIT_ERR_CONFIG - fi - - if [ $? -eq $FATAL_ERROR ]; then - exit $SMF_EXIT_ERR_FATAL - fi - ;; - -'stop') - - [ -f $PID_FILE ] && kill `cat $PID_FILE` - - rm -f $PID_FILE - rm -f $DOOR_FILE - ;; - - *) - echo "Usage: $0 start" - ;; -esac - -exit $SMF_EXIT_OK diff --git a/usr/src/cmd/wusbadm/wusb.xml b/usr/src/cmd/wusbadm/wusb.xml deleted file mode 100644 index fe35688ac9..0000000000 --- a/usr/src/cmd/wusbadm/wusb.xml +++ /dev/null @@ -1,107 +0,0 @@ -<?xml version="1.0"?> -<!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1"> -<!-- - Copyright 2009 Sun Microsystems, Inc. All rights reserved. - Use is subject to license terms. - - CDDL HEADER START - - The contents of this file are subject to the terms of the - Common Development and Distribution License (the "License"). - You may not use this file except in compliance with the License. - - You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE - or http://www.opensolaris.org/os/licensing. - See the License for the specific language governing permissions - and limitations under the License. - - When distributing Covered Code, include this CDDL HEADER in each - file and include the License file at usr/src/OPENSOLARIS.LICENSE. - If applicable, add the following below this CDDL HEADER, with the - fields enclosed by brackets "[]" replaced with your own identifying - information: Portions Copyright [yyyy] [name of copyright owner] - - CDDL HEADER END - - NOTE: This service manifest is not editable; its contents will - be overwritten by package or patch operations, including - operating system upgrade. Make customizations in a different - file. - - Service manifest for wusbd. ---> - -<service_bundle type='manifest' name='SUNWwusb:wusbd'> - -<service - name='system/wusbd' - type='service' - version='1'> - - <create_default_instance enabled='false' /> - - <single_instance /> - - <dependency name='usr' - type='service' - grouping='require_all' - restart_on='none'> - <service_fmri value='svc:/system/filesystem/local' /> - </dependency> - - <dependency name='devices' - type='service' - grouping='require_all' - restart_on='none'> - <service_fmri value='svc:/system/device/local' /> - </dependency> - - <exec_method - type='method' - name='start' - exec='/lib/svc/method/svc-wusb start' - timeout_seconds='30' /> - - <exec_method - type='method' - name='stop' - exec='/lib/svc/method/svc-wusb stop' - timeout_seconds='30' /> - - <exec_method - type='method' - name='refresh' - exec=':kill -HUP' - timeout_seconds='30' /> - - <property_group name='config' type='application'> - </property_group> - <property_group name='general' type='framework'> - <propval name='action_authorization' type='astring' - value='solaris.smf.manage.wusb' /> - <propval name='value_authorization' type='astring' - value='solaris.smf.manage.wusb' /> - </property_group> - - <property_group name='startd' type='framework'> - <!-- sub-process core dumps shouldn't restart session --> - <propval name='ignore_error' type='astring' - value='core,signal' /> - </property_group> - - <stability value='Unstable' /> - - <template> - <common_name> - <loctext xml:lang='C'> - Wireless USB management daemon - </loctext> - </common_name> - <documentation> - <manpage title='wusbd' section='1M' manpath='/usr/man' /> - </documentation> - </template> - -</service> - -</service_bundle> diff --git a/usr/src/cmd/wusbadm/wusbadm.c b/usr/src/cmd/wusbadm/wusbadm.c deleted file mode 100644 index 94635e1ab5..0000000000 --- a/usr/src/cmd/wusbadm/wusbadm.c +++ /dev/null @@ -1,1481 +0,0 @@ -/* - * CDDL HEADER START - * - * The contents of this file are subject to the terms of the - * Common Development and Distribution License (the "License"). - * You may not use this file except in compliance with the License. - * - * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE - * or http://www.opensolaris.org/os/licensing. - * See the License for the specific language governing permissions - * and limitations under the License. - * - * When distributing Covered Code, include this CDDL HEADER in each - * file and include the License file at usr/src/OPENSOLARIS.LICENSE. - * If applicable, add the following below this CDDL HEADER, with the - * fields enclosed by brackets "[]" replaced with your own identifying - * information: Portions Copyright [yyyy] [name of copyright owner] - * - * CDDL HEADER END - */ -/* - * Copyright 2009 Sun Microsystems, Inc. All rights reserved. - * Use is subject to license terms. - */ - - -#include <stdio.h> -#include <stdarg.h> -#include <sys/param.h> -#include <locale.h> -#include <dirent.h> -#include <fcntl.h> -#include <door.h> -#include <errno.h> -#include <sys/mman.h> -#include <getopt.h> -#include <assert.h> -#include <sys/stat.h> -#include <sys/usb/usba/wusba_io.h> -#include <sys/usb/clients/wusb_ca/wusb_ca.h> -#include "crypto_util.h" -#include "wusbd.h" - -/* - * EXIT STATUS - * The following exit values are returned: - * 0 Successful operation - * 1 Error: the operation failed. - * 2 Usage error. - */ -#define WUSB_EXIT_SUCCESS 0 -#define WUSB_EXIT_FAILURE 1 -#define WUSB_EXIT_USAGE 2 - - - -#define ASSO_CABLE_NAME "wusb_ca" - -#define WUSB_MAX_LEN 255 - -#define WUSB_HOSTID_LEN 2 -#define WUSB_DEVID_LEN 6 - -/* wusba admin list options */ -#define WUSB_FIELD_WIDTH 20 - -#define WUSB_LIST_HOST 0x01 -#define WUSB_LIST_DEV 0x02 -#define WUSB_LIST_HD (WUSB_LIST_HOST | WUSB_LIST_DEV) -#define WUSB_LIST_ID 0x04 -#define WUSB_LIST_TYPE 0x08 -#define WUSB_LIST_STATE 0x10 -#define WUSB_LIST_ALL (WUSB_LIST_ID | WUSB_LIST_TYPE | WUSB_LIST_STATE) - -/* cable device list */ -typedef struct dev_list { - char path[MAXPATHLEN]; - struct dev_list *next; -} dev_list_t; - -static wusb_device_info_t *dev_lists = NULL; -static uint32_t cnt = 0; - -/* log and debug helpers */ -static void wusb_prt(const char *, ...); -static void wusb_usage(const char *, ...); -static void wusb_fail(const char *, ...); -static void wusb_opterr(int, int); - - - -/* load host/dev list helpers */ -static void wusb_load_list(wusb_device_info_t **, uint32_t *cnt); -static void wusb_free_list(wusb_device_info_t *); - -/* door call helpers */ -static int wusb_door_req(int, door_arg_t *, char *, int); -static void wusb_door_free(door_arg_t *); -static uint16_t wusb_door_result(door_arg_t *da); - -/* check auths */ -static void wusb_check_auth(const char *); -/* usr input funcs */ -static void user_confirm(char *); -static void user_input(char *, char *, int); - -/* string translation helpers */ -static uint32_t str2id(char *); -static void usage(); - -/* list */ -static const struct option wusb_list_opts[] = { - { "host", no_argument, NULL, 'h'}, - { "device", no_argument, NULL, 'd'}, - { "output", required_argument, NULL, 'o'}, - {0, 0, 0, 0} -}; -static const char *WUSB_LIST_HEADER[] = { - "ID", /* host-id or dev-id */ - "STATE", /* host or device states */ - "TYPE", /* host or deivce types */ - NULL -}; - -static void do_list(int, char **); -static void do_list_args(int, char **, char *); - -static void parse_subopts(char *, const char *); -static int parse_option(char *, const char *); - -static void wusb_prt_titles(char); -static void wusb_prt_lists(char, wusb_device_info_t *); - - -static int find_dev_id(uint8_t, uint16_t); -static void parse_dev_id(const char *, wusb_dev_ctrl_t *); -static void parse_host_id(char *, uint8_t *); - -/* associate */ -static struct option wusb_asso_opts[] = { - { "host", required_argument, NULL, 'h'}, - { "cable", no_argument, NULL, 'c'}, - { "numeric", required_argument, NULL, 'n'}, - { "force", no_argument, NULL, 'f'}, - { "onetime", no_argument, NULL, 'o'}, - { 0, 0, 0, 0} -}; -static void do_associate(int, char **); -static void do_asso_args(int, char **, wusb_asso_ctrl_t *); - -static int input_host_id(uint8_t *); -static void input_dev_id(wusb_dev_ctrl_t *); -#ifdef NUMERIC_ENABLED -static int input_asso_type(uint8_t *); -#endif -static int select_cable_device(char *); - -/* remove dev */ -static struct option wusb_rmdev_opts[] = { - { "host", required_argument, NULL, 'h'}, - { "device", required_argument, NULL, 'd'}, - { "force", no_argument, NULL, 'f'}, - { 0, 0, 0, 0} -}; - -/* remove/enable/disable host */ -static struct option wusb_host_opts[] = { - { "host", required_argument, NULL, 'h'}, - { "force", no_argument, NULL, 'f'}, - { 0, 0, 0, 0} -}; - -static void do_host(int, char **, int); -static void do_host_args(int, char **, int, wusb_dev_ctrl_t *); -static void do_remove_host(int, char **); -static void do_enable_host(int, char **); -static void do_disable_host(int, char **); - -static void do_remove_dev(int, char **); -static void do_remove_dev_args(int, char **, wusb_dev_ctrl_t *); - - - -/* error message maps */ -struct errormsgs { - int code; - char *errmsg; -} wusb_errors[] = { - { WUSBADM_OK, "success" }, - { WUSBADM_AUTH_FAILURE, "permisson denied" }, - { WUSBADM_NO_HOST, "host does not exist" }, - { WUSBADM_NO_DEVICE, "device does not exist" }, - { WUSBADM_CCSTORE_ACC, "fail to access CC store" }, - { WUSBADM_NO_SUPPORT, "command not supported" }, - { WUSBADM_INVAL_HOSTID, "invalid host id" }, - { WUSBADM_INVAL_DEVID, "invalid device id" }, - { WUSBADM_HOST_NOT_ATTACH, "host not attached" }, - { WUSBADM_FAILURE, "unknown error"} -}; - -char * -wusb_strerror(int err) -{ - if (err < 0 || err > WUSBADM_FAILURE) { - - return (wusb_errors[WUSBADM_FAILURE].errmsg); - } - - return (wusb_errors[err].errmsg); -} - - -/* - * wusbadm cmd line tool is used for used to administrate the wireless usb - * host and wireless usb devices. - * list - List the device and host status - * associated - Setup assocaition between host and devices. - * remove-dev - Remove the assocation of device - * remove-host - Remove the host information and all the devices assocaiton to - * the host - * enable-host - Enable a host to be ready to accept wireless devices - * disable-host - Disable a host, host will not accpet connections - */ - -int -main(int argc, char **argv) -{ - int i; - static struct { - const char *cmd; - void (*func)(int, char **); - const char *auth; - } cmd_list[] = { - { "list", do_list, WUSB_AUTH_READ}, - { "associate", do_associate, WUSB_AUTH_MODIFY}, - { "remove-dev", do_remove_dev, WUSB_AUTH_MODIFY}, - { "remove-host", do_remove_host, WUSB_AUTH_HOST}, - { "enable-host", do_enable_host, WUSB_AUTH_HOST}, - { "disable-host", do_disable_host, WUSB_AUTH_HOST}, - { NULL, NULL} - }; - - - (void) setlocale(LC_ALL, ""); - -#ifndef TEXT_DOMAIN -#define TEXT_DOMAIN "SYS_TEST" -#endif - (void) textdomain(TEXT_DOMAIN); - - if (argc <= 1) { - usage(); - exit(WUSB_EXIT_USAGE); - } - - /* start wusb damemon */ - if (strcmp(argv[1], "--daemon") == 0) { - (void) daemonize(); - exit(WUSB_EXIT_SUCCESS); - } - - - /* wusbadm entry */ - for (i = 0; cmd_list[i].cmd; i++) { - if (strcmp(cmd_list[i].cmd, argv[1]) == 0) { - break; - } - } - if (!cmd_list[i].cmd) { - wusb_usage("unknown option %s", argv[1]); - } - wusb_check_auth(cmd_list[i].auth); - - wusb_load_list(&dev_lists, &cnt); - - cmd_list[i].func(argc - 1, &argv[1]); - - wusb_free_list(dev_lists); - return (WUSB_EXIT_SUCCESS); -} - -static void -usage() -{ - wusb_prt("\nUsage:\twusbadm sub-command args ...\n\n"); - wusb_prt("\tlist [-h | -d] [-o field[,...]]\n"); - wusb_prt("\tassociate [-h host-id] [[-c [-f]] | -n] [-o]\n"); - wusb_prt("\tremove-dev [[-d dev-id] | [-h host-id]] [-f]\n"); - wusb_prt("\tremove-host [-h host-id] [-f]\n"); - wusb_prt("\tenable-host [-h host-id]\n"); - wusb_prt("\tdisable-host [-h host-id] [-f]\n"); - wusb_prt("\n"); -} - -/* - * list command routine. - * wusbadmin list [-h | -d] [-o field[,...]] - * 1. parse the options - * 2. load host/deivce info from daemon - * 3. print titles accoding to list options - * 4. print host/deivce list one by one - */ -static void -do_list(int argc, char **argv) -{ - char fields = 0x0; - int i; - - /* parse the list options */ - do_list_args(argc, argv, &fields); - - - /* print list title */ - wusb_prt_titles(fields); - - /* print out the result */ - for (i = 0; i < cnt; i++) { - wusb_prt_lists(fields, &dev_lists[i]); - } - - -} - -/* - * associate command routine - * wusbadmin associate [-h host-id] [[-c [-f] | -n] [-o] - * 1. Parse the options and get user input - * 2. Send the asso infor the daemon - */ -static void -do_associate(int argc, char **argv) -{ - door_arg_t da; - wusb_asso_ctrl_t asso_ctrl; - uint16_t rval = 0; - - /* Get association options */ - bzero(&asso_ctrl, sizeof (wusb_asso_ctrl_t)); - do_asso_args(argc, argv, &asso_ctrl); - - /* open door file */ - (void) wusb_door_req(WUSB_DCMD_ASSOCIATE, &da, - (char *)&asso_ctrl, sizeof (wusb_asso_ctrl_t)); - - /* association result */ - rval = wusb_door_result(&da); - - wusb_door_free(&da); - - if (rval != WUSBADM_OK) { - wusb_fail("%s", wusb_strerror(rval)); - } - -} -/* - * remove-dev command routine - * remove-dev [[-d dev-id] | [-h host-id]] [-f] - * 1. parse options/user input - * 2. send message to daemon. - * dev-id != 0 means remove one dev - * dev-id == 0 means remove all dev with a host - */ -static void -do_remove_dev(int argc, char **argv) -{ - wusb_dev_ctrl_t devctrl; - door_arg_t da; - - uint16_t rval = WUSBADM_OK; - - /* parse options */ - bzero(&devctrl, sizeof (wusb_dev_ctrl_t)); - do_remove_dev_args(argc, argv, &devctrl); - - /* send command to daemon */ - (void) wusb_door_req(WUSB_DCMD_REMOVE_DEV, &da, - (char *)&devctrl, sizeof (wusb_dev_ctrl_t)); - - - rval = wusb_door_result(&da); - - wusb_door_free(&da); - - if (rval != WUSBADM_OK) { - wusb_fail("%s", wusb_strerror(rval)); - } - - -} - -/* - * Send the LOAD_CC request to daemon. Daemon will allocate memory and put - * all CCs in that block of memory. We need to free the memory here. - * CCs are in data array format. - */ -static void -wusb_load_list(wusb_device_info_t **cc_list, uint32_t *cnt) -{ - door_arg_t da; - - size_t buflen = 0; - uint32_t num = 0; - uint16_t rval = WUSBADM_OK; - - /* send command to daemon */ - (void) wusb_door_req(WUSB_DCMD_LIST_DATA, &da, 0, 0); - - rval = wusb_door_result(&da); - if (rval != WUSBADM_OK) { - wusb_door_free(&da); - - wusb_fail("%s", wusb_strerror(rval)); - } - - /* number of the devinfo list */ - (void) memcpy(&num, da.data_ptr+sizeof (uint16_t), sizeof (uint32_t)); - - if (num) { - - buflen = (num) * sizeof (wusb_device_info_t); - if ((*cc_list = malloc(buflen)) == NULL) { - wusb_door_free(&da); - - wusb_fail("list: malloc buffer failed"); - } - - (void) memcpy(*cc_list, - da.data_ptr + sizeof (uint32_t) + sizeof (uint16_t), - buflen); - } - *cnt = num; - - /* unmap the buffer */ - wusb_door_free(&da); -} -static void -wusb_free_list(wusb_device_info_t *cc_list) -{ - if (cc_list) { - free(cc_list); - } - cnt = 0; -} - -/* - * This is a wrapper of door call for wusb adm tool. - * Mandatory: - * cmd - wusb admin command (WUSB_DCMD_*). - * da - door call arg. - * Optional: - * databuf - data send to daemon. - * size - data buf size. - */ -static int -wusb_door_req(int cmd, door_arg_t *da, char *databuf, int size) -{ - wusb_door_call_t dcall; - int fd = -1; - - bzero(&dcall, sizeof (wusb_door_call_t)); - dcall.cmdss = cmd; - - /* copy data buffer */ - if (databuf) { - (void) memcpy(dcall.buf, databuf, size); - } - - /* set rbuf to 0, unmap the data buf later */ - bzero(da, sizeof (door_arg_t)); - da->data_ptr = (char *)&dcall; - da->data_size = sizeof (wusb_door_call_t); - da->rbuf = 0; - da->rsize = 0; - - /* open door file */ - if ((fd = open(DOOR_FILE, O_RDONLY)) < 0) { - - wusb_fail("daemon not started"); - } - - /* make door call */ - if (door_call(fd, da) != 0) { - (void) close(fd); - - wusb_fail("daemon out of service:%s", strerror(errno)); - } - - (void) close(fd); - - if (da->data_size == 0) { - - wusb_fail("no data from daemon"); - } - - return (WUSBA_SUCCESS); -} - -/* - * After each door call return, the first 2 bytes of the data - * returned is encoded as the door call result from daemon. - * This is a wrapper to get the door call result - */ -uint16_t -wusb_door_result(door_arg_t *da) { - uint16_t rval = 0; - (void) memcpy(&rval, da->data_ptr, sizeof (uint16_t)); - - return (rval); -} - -/* - * Unmap the buffer after door call. - * It is mandatory after any wusb_door_call since we set the rbuf to NULL - * in the wusb_door_call. So any buffer returned is from the client proces. - * See door_call(3C) for more infor - */ -static void -wusb_door_free(door_arg_t *da) -{ - (void) munmap(da->rbuf, da->rsize); -} - -/* - * wusbadmin remove-host routine - * remove-host [-h host-id] [-f] - */ -static void -do_remove_host(int argc, char **argv) -{ - do_host(argc, argv, WUSB_DCMD_REMOVE_HOST); -} - -/* - * wusbadmin enable-host routine - * enable-host [-h host-id] - */ -static void -do_enable_host(int argc, char **argv) -{ - do_host(argc, argv, WUSB_DCMD_ENABLE_HOST); -} - -/* - * wusbadmin disable-host routine - * disable-host [-h host-id] [-f] - */ -static void -do_disable_host(int argc, char **argv) -{ - do_host(argc, argv, WUSB_DCMD_DISABLE_HOST); -} - -/* - * wusb do host routine. The wrapper for all host related - * subcommand (enable-host, disable-host, remove-host). - * 1. parser options/user input - * 2. send wusb command to daemon - */ -static void -do_host(int argc, char **argv, int cmd) -{ - wusb_dev_ctrl_t hostctrl; - door_arg_t da; - - uint16_t rval = 0; - - /* parse options */ - bzero(&hostctrl, sizeof (wusb_dev_ctrl_t)); - do_host_args(argc, argv, cmd, &hostctrl); - - /* door call to daemon */ - (void) wusb_door_req(cmd, &da, - (char *)&hostctrl, sizeof (wusb_dev_ctrl_t)); - - rval = wusb_door_result(&da); - wusb_door_free(&da); - - if (rval != WUSBADM_OK) { - wusb_fail("%s", wusb_strerror(rval)); - } -} - -/* - * wusb list option parser - * wusbadmin list [-h | -d] [-o field[,...]] - */ -static void -do_list_args(int argc, char **argv, char *option) -{ - char fields = 0x0; - int c; - - while ((c = getopt_long(argc, argv, ":hdo:", - wusb_list_opts, NULL)) != -1) { - switch (c) { - case 'h': - if (fields & WUSB_LIST_HOST) { - wusb_usage("too many -h specified"); - } - if (fields & WUSB_LIST_DEV) { - wusb_usage("-h and -d used together"); - } - fields |= WUSB_LIST_HOST; - break; - case 'd': - if (fields & WUSB_LIST_HOST) { - wusb_usage("-h and -d used together"); - } - if (fields & WUSB_LIST_DEV) { - wusb_usage("too many -d specified"); - } - fields |= WUSB_LIST_DEV; - break; - case 'o': - if (strlen(optarg) > 63) { - wusb_usage("options too long"); - } - (void) parse_option(&fields, optarg); - break; - default: - wusb_opterr(optopt, c); - break; - } - } - - if (optind < argc) { - wusb_usage("unrecognized options:%s", argv[optind++]); - } - - /* if no option specified,print out all fields */ - fields |= (fields & WUSB_LIST_HD)? 0x00:WUSB_LIST_HD; - fields |= (fields & WUSB_LIST_ALL)? 0x00:WUSB_LIST_ALL; - - *option = fields; - - -} -/* - * Print the header for list subcommand. - * Each title is right aligned with length of WUSB_FIELD_WIDTH - * The following titles will be printed if the relative tags - * marked in the fields option. - * ID STATE TYPE - */ -static void -wusb_prt_titles(char fields) -{ - int i = 0; - char option; - for (option = WUSB_LIST_ID; - option <= WUSB_LIST_STATE; - option <<= 1, i++) { - if (fields & option) { - wusb_prt("%-*s", WUSB_FIELD_WIDTH, - WUSB_LIST_HEADER[i]); - } - } - - (void) putchar('\n'); - -} -/* - * Append the host-id / dev-id to the output buf. - * host-id - 2 digits number (XX) - * dev-id - 5 digits number (XX.XXX) - * See wusbadm (1M) for more - */ -static void -append_id(char *buf, wusb_device_info_t *devinfo) -{ - char tmp[WUSB_MAX_LEN] = {'\0'}; - - if (devinfo->dev) { - (void) snprintf(tmp, WUSB_MAX_LEN, "%02d.%03d", - devinfo->host, devinfo->dev); - } else { - (void) snprintf(tmp, WUSB_MAX_LEN, "%02d", devinfo->host); - } - (void) snprintf(buf, WUSB_MAX_LEN, "%s%-*s", - buf, WUSB_FIELD_WIDTH, tmp); -} -/* - * Append state to the output buf. - * host - enabled/disabled - * device - connected/disconnected - * See wusbadm (1M) for more - */ -static void -append_state(char *buf, wusb_device_info_t *devinfo) -{ - const char *WUSB_DEV_STATE_MSG[] = { - "disconnected", /* WUSB_STATE_UNCONNTED */ - "connected", /* WUSB_STATE_CONNTING */ - "connected", /* WUSB_STATE_UNAUTHENTICATED */ - "connected", /* WUSB_STATE_DEFAULT */ - "connected", /* WUSB_STATE_ADDRESSED */ - "connected", /* WUSB_STATE_CONFIGURED */ - "connected", /* WUSB_STATE_SLEEPING */ - "connected", /* WUSB_STATE_RECONNTING */ - NULL - }; - const char *WUSB_HOST_STATE_MSG[] = { - "disconnected", /* WUSB_HC_DISCONNTED */ - "disabled", /* WUSB_HC_STOPPED */ - "enabled", /* WUSB_HC_STARTED */ - "disabled", /* WUSB_HC_CH_STOPPED */ - NULL - }; - char tmp[WUSB_MAX_LEN] = {'\0'}; - - if (devinfo->dev) { - - /* append the state for device */ - if (devinfo->stat > WUSB_STATE_RECONNTING) { - (void) snprintf(tmp, WUSB_MAX_LEN, "%s", "unknown"); - } else { - (void) snprintf(tmp, WUSB_MAX_LEN, "%s", - WUSB_DEV_STATE_MSG[devinfo->stat]); - } - } else { - /* append the state for host */ - if (devinfo->stat > WUSB_HC_CH_STOPPED) { - (void) snprintf(tmp, WUSB_MAX_LEN, "%s", "unknown"); - } else { - (void) snprintf(tmp, WUSB_MAX_LEN, "%s", - WUSB_HOST_STATE_MSG[devinfo->stat]); - } - } - (void) snprintf(buf, WUSB_MAX_LEN, "%s%-*s", - buf, WUSB_FIELD_WIDTH, tmp); -} - - -/* - * Appenend host/dev type to the ouput buf string - * Currently map the file name to specific types - * TODO: how to define the type - */ -static void -append_type(char *buf, wusb_device_info_t *devinfo) -{ - (void) snprintf(buf, WUSB_MAX_LEN, "%s%-*s", buf, WUSB_FIELD_WIDTH, - devinfo->type); -} - - -/* - * This is core func to print wireless device list on systems. - * Print the devinfo list entry with option field - */ -static void -wusb_prt_lists(char fields, wusb_device_info_t *devinfo) -{ - char buf[WUSB_MAX_LEN+1] = {'\0'}; - int i = 0; - char opt = 0; - void (*append_funcs[])(char *, wusb_device_info_t *) = { - append_id, - append_state, - append_type, - NULL - }; - - /* check if dev or host need to be print out */ - if ((devinfo->dev && !(fields & WUSB_LIST_DEV)) || - (!devinfo->dev && !(fields & WUSB_LIST_HOST))) { - return; - } - - /* Append all the enabled fields to the output buf */ - for (i = 0, opt = WUSB_LIST_ID; - opt <= WUSB_LIST_STATE; - opt <<= 1, i++) { - if (fields & opt) { - append_funcs[i](buf, devinfo); - } - } - - wusb_prt("%s\n", buf); -} - -/* - * wusb association option parser - * wusbadmin association [-h host-id] [[-c [-f] | -n] [-o] - * Note:Only cable association is supported now - */ -static void -do_asso_args(int argc, char **argv, wusb_asso_ctrl_t *asso_ctrl) -{ - int c; - int force = 0; - - while ((c = getopt_long(argc, argv, ":h:cfno", wusb_asso_opts, 0)) - != -1) { - switch (c) { - case 'h': - parse_host_id(optarg, &(asso_ctrl->host)); - break; - case 'c': - asso_ctrl->type |= ASSO_TYPE_CABLE; - break; - case 'n': - asso_ctrl->type |= ASSO_TYPE_NUMERIC; - break; - case 'f': - force = 1; - break; - case 'o': - asso_ctrl->onetime = 1; - break; - default: - wusb_opterr(optopt, c); - break; - } - } - - if (optind < argc) { - wusb_usage("unrecognized options:%s", argv[optind++]); - } - - /* TODO: support cable association */ - if (asso_ctrl->type & ASSO_TYPE_NUMERIC) { - - wusb_fail("Numeric association not supported"); - } - - /* get user input host id */ - if (!asso_ctrl->host) { - (void) input_host_id(&asso_ctrl->host); - } - - /* get user input association type */ - if (!asso_ctrl->type) { - asso_ctrl->type |= ASSO_TYPE_CABLE; - /* Todo: Will be enabled after Numberic Assocation support */ - -#ifdef NUMERIC_ENABLED - (void) input_asso_type(&asso_ctrl->type); -#endif - } - - /* get user input cable device to associate */ - if (asso_ctrl->type == ASSO_TYPE_CABLE) { - (void) select_cable_device(asso_ctrl->path); - } - - /* confirm with user to continue or not */ - if (!force) { - wusb_prt("Associate device (%s) with host (%02d) via cable\n", - asso_ctrl->path, asso_ctrl->host); - user_confirm("Continue "); - } - -} -/* - * Convert a string to an id (host-id/dev-id/cable-dev-id) - * Fail if 0 returned, since each id is indexed from 1. - * Widely used to handle user input ids. - */ -static uint32_t -str2id(char *arg) -{ - uint32_t id = 0; - - /* check the string and generate int result */ - while (*arg) { - if (*arg < '0' || *arg > '9') { - - return (0); - } - id = id*10+(*arg-'0'); - arg++; - } - - return (id); -} - -static void -parse_host_id(char *arg, uint8_t *host) { - int len = strlen(arg); - - if ((len > WUSB_HOSTID_LEN) || (len == 0)) { - wusb_fail("host-id should be 2 digits"); - } - if ((*host = str2id(arg)) == 0) { - wusb_fail("invalid host id:%s", arg); - } - if (find_dev_id(*host, 0) < 0) { - wusb_fail("host-id does not exist: %02d ", *host); - } - - return; - -} -/* - * Get the host from user input. - * 1. list all the host id from the daemon - * 2. Ask user to input the host id - * 3. Check host id and return - */ -static int -input_host_id(uint8_t *host) -{ - - char fields = WUSB_LIST_HOST | WUSB_LIST_ALL; - char buf[WUSB_MAX_LEN] = {'\0'}; - int i = 0; - - - - /* show avaialbe host id to usr */ - wusb_prt_titles(fields); - for (i = 0; i < cnt; i++) { - wusb_prt_lists(fields, &dev_lists[i]); - } - - /* get user input of host id */ - user_input("Please select 2 digits host-id:", buf, WUSB_MAX_LEN-1); - parse_host_id(buf, host); - - return (WUSBA_SUCCESS); -} -static void -input_dev_id(wusb_dev_ctrl_t *devctrl) -{ - - char fields = WUSB_LIST_DEV | WUSB_LIST_ALL; - char buf[WUSB_MAX_LEN] = {'\0'}; - int i = 0; - - - - /* show avaialbe host id to usr */ - wusb_prt_titles(fields); - for (i = 0; i < cnt; i++) { - wusb_prt_lists(fields, &dev_lists[i]); - } - - /* get user input of host id */ - user_input("Please select dev-id:", buf, WUSB_MAX_LEN-1); - - parse_dev_id(buf, devctrl); -} -static int -find_dev_id(uint8_t host, uint16_t dev) -{ - int rval = WUSBA_FAILURE; - int i; - - for (i = 0; i < cnt; i++) { - if ((dev_lists[i].dev == dev) && - (dev_lists[i].host == host)) { - rval = WUSBA_SUCCESS; - - break; - } - } - - return (rval); -} - -/* - * Select assocation type. - * - Cable - * - Numeric Not supported - */ -#ifdef NUMERIC_ENABLED -static int -input_asso_type(uint8_t *asso_type) -{ - char buf[15] = {'\0'}; - - user_input("Select association type (c/n) :", buf, 14); - if (strcasecmp(buf, "c") == 0) { - *asso_type = ASSO_TYPE_CABLE; - - } else if (strcasecmp(buf, "n") == 0) { - *asso_type = ASSO_TYPE_NUMERIC; - - } else { - - wusb_usage("invalid association type"); - } - return (WUSBA_SUCCESS); -} -#endif - -/* - * Create a list contains all the cable devices on the system - */ -static void -init_cable_devices(dev_list_t **dev_lists, int *num) -{ - struct dirent *entry = NULL; - dev_list_t *_devlist = NULL; - - DIR *dirp = opendir(WUSB_HOST_PATH); - char filename[MAXPATHLEN] = {'\0'}; - - *num = 0; - /* - * walk on all the filename in the /dev/usb, check the filename - * to see if it is a cable asso filename and add it to the devinfo - * list if so - */ - if (!dirp) { - wusb_fail("cable device not available"); - } - while ((entry = readdir(dirp)) != NULL) { - /* searching for cable node */ - if (strstr(entry->d_name, ASSO_CABLE_NAME) == NULL) { - continue; - } - (void) snprintf(filename, MAXPATHLEN, "%s/%s", - WUSB_HOST_PATH, entry->d_name); - - /* add the filename to the dev list */ - if (_devlist == NULL) { - _devlist = malloc(sizeof (dev_list_t)); - *dev_lists = _devlist; - } else { - _devlist->next = malloc(sizeof (dev_list_t)); - _devlist = _devlist->next; - } - /* this need to be freed */ - (void) snprintf(_devlist->path, MAXPATHLEN, - "%s", filename); - - _devlist->next = NULL; - - /* increase the list number */ - (*num)++; - } - (void) closedir(dirp); -} -/* Free the devlist created for cable device */ -static void -free_devlist(dev_list_t *dev_list) -{ - dev_list_t *head = dev_list; - while (head) { - head = dev_list->next; - free(dev_list); - dev_list = head; - } -} - -/* find the cable dev with the user-inputed index */ -static dev_list_t * -get_cable_dev(dev_list_t *dev_list, int index) -{ - int i = 1; - while ((i != index) && dev_list) { - dev_list = dev_list->next; - i++; - } - - return (dev_list); -} -/* print the cable devlist with index */ -static void -show_devlist(dev_list_t *dev_list) -{ - /* show all the cable devices to user */ - int index = 1; - wusb_prt("Cable devices on the system:\n"); - while (dev_list) { - wusb_prt("%03d. %s\n", index, dev_list->path); - dev_list = dev_list->next; - index++; - } - -} -/* - * when doing association, all the cable devices on the system - * should be print out to the user - */ -static int -select_cable_device(char *device) -{ - /* cable association */ - char buf[32]; - int cableid = 1; - - dev_list_t *head = NULL; - dev_list_t *tmp = NULL; - int devnum = 0; - - /* get all the cable dev on the system */ - init_cable_devices(&head, &devnum); - - /* Get the device name as user input */ - if (!head) { - wusb_fail("no cable devices found "); - } - - if (devnum != 1) { - show_devlist(head); - - /* get the user input of the cable dev index */ - user_input("Select cable device to associate:", buf, 19); - if (strlen(buf) != 3) { - wusb_fail("cable device id should be 3 digits"); - } - cableid = str2id(buf); - - /* check user iput */ - if ((cableid <= 0) || (cableid > devnum)) { - free_devlist(head); - - wusb_fail("invalid cable device "); - } - - } else { - /* if only one dev exist, use it without asking user */ - cableid = 1; - } - - /* find the device to associate */ - tmp = get_cable_dev(head, cableid); - (void) snprintf(device, MAXPATHLEN, "%s", tmp->path); - - /* free the list */ - free_devlist(head); - - return (WUSBA_SUCCESS); - -} -/* - * Parse the -o option for wusbadm list - */ -static int -parse_option(char *fields, const char *optarg) -{ - - char *lasts = NULL, *token = NULL; - char buf[64] = { '\0' }; - - (void) snprintf(buf, 64, "%s", optarg); - if ((token = strtok_r(buf, ",", &lasts)) != 0) { - parse_subopts(fields, token); - while ((token = strtok_r(NULL, ",", &lasts))) { - parse_subopts(fields, token); - } - } - - return (WUSBA_SUCCESS); - -} - -/* - * wusbadmin list - * parse the sub option extracted from -o options - */ -static void -parse_subopts(char *fields, const char *str) -{ - int i; - char opt; - for (i = 0, opt = WUSB_LIST_ID; opt <= WUSB_LIST_STATE; i++) { - if (strcasecmp(str, WUSB_LIST_HEADER[i]) == 0) { - *fields |= opt; - break; - } - opt = opt << 1; - } - - if (opt > WUSB_LIST_STATE) { - - wusb_usage("unrecognized options:%s", str); - } - -} - -/* - * Device id parser for remove-dev - * dev id is 5 digits with format XX.XXX - */ -void -parse_dev_id(const char *arg, wusb_dev_ctrl_t *devctrl) -{ - char buf[WUSB_DEVID_LEN+1] = {'\0'}; - char *tmp = NULL; - - if (strlen(arg) > WUSB_DEVID_LEN) goto fail; - - (void) snprintf(buf, WUSB_DEVID_LEN+1, "%s", arg); - - if ((tmp = strchr(buf, '.')) == NULL) goto fail; - /* get host id */ - *tmp = '\0'; - if ((devctrl->host = str2id(buf)) == 0) { - goto fail; - } - - /* get device id */ - if ((devctrl->dev = str2id(tmp+1)) == 0) { - goto fail; - } - - if (find_dev_id(devctrl->host, devctrl->dev) < 0) { - wusb_fail("dev-id does not exist: %02d.%03d ", - devctrl->host, devctrl->dev); - } - - return; -fail: - wusb_fail("unknown device id:%s", arg); - -} -/* - * remove-dev options parser - * remove-dev [[-d dev-id] | [-h host-id]] [-f] - */ -static void -do_remove_dev_args(int argc, char **argv, wusb_dev_ctrl_t *devctrl) -{ - int c; - int force = 0; - bzero(devctrl, sizeof (wusb_dev_ctrl_t)); - - while ((c = getopt_long(argc, argv, ":h:d:f", - wusb_rmdev_opts, NULL)) != -1) { - switch (c) { - case 'h': - if (devctrl->dev) { - wusb_usage("-h -d can not be" - "used together"); - } - if (devctrl->host) { - wusb_usage("multi -h is not allowed"); - } - - /* get 2 digit host id */ - parse_host_id(optarg, &(devctrl->host)); - - break; - - case 'd': - if (devctrl->dev) { - wusb_usage("multi -d is not allowed"); - } - if (devctrl->host) { - wusb_usage("-h -d can not be" - "used together"); - } - /* parse devid */ - (void) parse_dev_id(optarg, devctrl); - break; - case 'f': - force = 1; - break; - default: - wusb_opterr(optopt, c); - break; - - } - } - - if (optind < argc) { - wusb_usage("unrecognized options:%s", argv[optind++]); - } - if ((devctrl->host == 0) && (devctrl->dev == 0)) { - input_dev_id(devctrl); - } - - /* confirm with user to continue or not */ - if (!force) { - if (devctrl->dev) { - wusb_prt("Remove the device's association information" - " of device (%02d.%03d) from system.\nThis device" - " can not be connected with the host until it is" - " associated again.\n", - devctrl->host, devctrl->dev); - } else { - wusb_prt("Remove the information of all the devices " - "associated with host (%02d) from the system\n" - "All the devices asociated with the host can not" - " be connected with it until they are associated" - " again.\n", devctrl->host); - } - user_confirm("Continue "); - } -} -/* - * Confirm with user continue or not - * info: the information shown to user before input - */ -static void -user_confirm(char *info) -{ - char yesorno[20]; - - wusb_prt(info); - user_input("(yes/no): ", yesorno, 19); - if (strcasecmp(yesorno, "no") == 0) { - wusb_fail(""); - } - if (strcasecmp(yesorno, "n") == 0) { - wusb_fail(""); - } - if (strcasecmp(yesorno, "yes") == 0) { - return; - } - if (strcasecmp(yesorno, "y") == 0) { - return; - } - wusb_fail("illegal input: %s", yesorno); -} -/* - * Get user input - * msg(in): infor shown to user before input - * length(in): buf size to save uer input - * buf(out): user input saved in buffer - */ -static void -user_input(char *msg, char *buf, int length) -{ - int i = 0, b; - - wusb_prt(msg); - /*CONSTCOND*/ - while (1) { - b = getc(stdin); - if (b == '\n' || b == '\0' || b == EOF) { - if (i < length) - buf[i] = 0; - break; - } - if (i < length) - buf[i] = b; - i++; - } - if (i >= length) { - buf[length] = 0; - } - -} -/* - * do host options parser - * remove-host [-h host-id] [-f] - * enable-host [-h host-id] - * disable-host [-h host-id] [-f] - */ -static void -do_host_args(int argc, char **argv, int cmd, wusb_dev_ctrl_t *hostctrl) -{ - int c; - int force = 0; - - while ((c = getopt_long(argc, argv, ":h:f", - wusb_host_opts, NULL)) != -1) { - switch (c) { - case 'h': - if (hostctrl->host) { - wusb_usage("multi -h is not allowed"); - } - /* 2 digits host id */ - parse_host_id(optarg, &(hostctrl->host)); - - break; - - case 'f': - /* enable host does not need -f */ - if (cmd == WUSB_DCMD_ENABLE_HOST) { - wusb_opterr(optopt, c); - } - force = 1; - break; - default: - wusb_opterr(optopt, c); - break; - - } - } - if (optind < argc) { - wusb_usage("unrecognized options:%s", argv[optind++]); - } - /* - * all the host related command can be used without a specific - * host-id, so list all the hosts avalable to users for selection - */ - if (hostctrl->host == 0) { - (void) input_host_id(&(hostctrl->host)); - } - - - /* confirm with user to continue or not */ - if (!force && (cmd != WUSB_DCMD_ENABLE_HOST)) { - switch (cmd) { - case WUSB_DCMD_DISABLE_HOST: - wusb_prt("Disable host (%02d).\nAll the" - " devices connected with the host will be" - " disconnected\n", hostctrl->host); - break; - - case WUSB_DCMD_REMOVE_HOST: - wusb_prt("Remove host (%02d).\nAll the" - " association with the host will be" - " removed\n", hostctrl->host); - break; - default: - break; - } - user_confirm("Continue"); - } - -} - -static void -wusb_check_auth(const char *auth) { - - uid_t uid = geteuid(); - if (chk_auths(uid, auth) < 0) { - wusb_fail("%s", wusb_strerror(WUSBADM_AUTH_FAILURE)); - } - -} -/* - * wusb exit helper funcstion - * wusb_fail or wusb_usage - */ -static void -wusb_fail(const char *format, ...) -{ - va_list alist; - - format = gettext(format); - (void) fprintf(stderr, gettext("wusbadm: ")); - va_start(alist, format); - (void) vfprintf(stderr, format, alist); - va_end(alist); - (void) fprintf(stderr, "\n"); - - wusb_free_list(dev_lists); - exit(WUSB_EXIT_FAILURE); -} -static void -wusb_usage(const char *format, ...) -{ - va_list alist; - - format = gettext(format); - (void) fprintf(stderr, gettext("wusbadm: ")); - va_start(alist, format); - (void) vfprintf(stderr, format, alist); - va_end(alist); - (void) fprintf(stderr, "\n"); - usage(); - - wusb_free_list(dev_lists); - exit(WUSB_EXIT_USAGE); -} - - -/* wusb print helper func */ -static void -wusb_prt(const char *format, ...) -{ - va_list alist; - - format = gettext(format); - va_start(alist, format); - (void) vfprintf(stdout, format, alist); - va_end(alist); -} - -/* wusb option failuer func */ -static void -wusb_opterr(int opt, int opterr) -{ - switch (opterr) { - case ':': - wusb_usage("option '-%c' requires a value", opt); - break; - case '?': - default: - wusb_usage("unrecognized option '-%c'", opt); - break; - } -} diff --git a/usr/src/cmd/wusbadm/wusbd.c b/usr/src/cmd/wusbadm/wusbd.c deleted file mode 100644 index b661eee394..0000000000 --- a/usr/src/cmd/wusbadm/wusbd.c +++ /dev/null @@ -1,2578 +0,0 @@ -/* - * CDDL HEADER START - * - * The contents of this file are subject to the terms of the - * Common Development and Distribution License (the "License"). - * You may not use this file except in compliance with the License. - * - * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE - * or http://www.opensolaris.org/os/licensing. - * See the License for the specific language governing permissions - * and limitations under the License. - * - * When distributing Covered Code, include this CDDL HEADER in each - * file and include the License file at usr/src/OPENSOLARIS.LICENSE. - * If applicable, add the following below this CDDL HEADER, with the - * fields enclosed by brackets "[]" replaced with your own identifying - * information: Portions Copyright [yyyy] [name of copyright owner] - * - * CDDL HEADER END - */ -/* - * Copyright 2009 Sun Microsystems, Inc. All rights reserved. - * Use is subject to license terms. - */ - -#include <unistd.h> -#include <stdarg.h> -#include <sys/stat.h> -#include <stdio.h> -#include <signal.h> -#include <door.h> -#include <libsysevent.h> -#include <sys/sunddi.h> -#include <sys/wait.h> -#include <fcntl.h> -#include <syslog.h> -#include <pthread.h> -#include <dirent.h> -#include <locale.h> -#include <alloca.h> /* alloca */ -#include <errno.h> -#include <pwd.h> - -#include <priv_utils.h> -#include <priv.h> - -#include <sys/usb/usba/wusba_io.h> -#include <sys/usb/clients/wusb_ca/wusb_ca.h> -#include "crypto_util.h" -#include "wusbd.h" - - -/* deamon exit status code */ -#define CONFIG_ERROR 1 -#define FATAL_ERROR 2 - -#define PKTOKEN "Sun Software PKCS#11 softtoken " -#define TOKENDIR "/etc/usb" - -/* Restrict the max number association for one host to 200 */ -#define HOST_MAX 100 -#define DEV_MAX 200 - -/* global mutext for door service */ -static pthread_mutex_t mutex_cclock = PTHREAD_MUTEX_INITIALIZER; -static void wusbd_daemon_enter(); -static void wusbd_daemon_leave(char *, int); - - -static wusb_cc_list_t *global_cclist = NULL; -static uint32_t cc_cnt = 0; -static wusb_cc_list_t *devids[HOST_MAX][DEV_MAX]; - - -/* cc utility funcs */ -static int save_cc(const wusb_cc_info_t *); -static int save_cc_to_list(const wusb_cc_info_t *); -static int save_cc_to_store(const wusb_cc_info_t *); - - -static void refresh(int); -static void event_handler(sysevent_t *); - -/* daemon init functions */ -static int wusbd_daemonize_init(void); -static void wusbd_daemonize_fini(int, int); -static int init_daemon_pid(); -static int init_sys_evnt(); -static int init_door_srv(); -static int init_global_cc_list(); -static void print_prv(); - -static void exit_clean(int); - -/* walk on all hosts in system */ -typedef void (* host_func)(const char *); -static void all_hosts_iterate(host_func); - - -/* walk on all cc list */ -typedef int (* cc_list_func)(wusb_cc_list_t *, void *); -static void global_list_iterate(cc_list_func, void *); -static void add_to_global_list(wusb_cc_list_t *); -static void remove_from_global_list(wusb_cc_list_t *); - -/* update cc list device status */ -static void clean_all_cc_list(); -static void update_cc_list(const char *); -static void update_all_cc_list(); -static int update_cc_file(); - -static int add_all_cc_to_host(const char *, uint8_t); -static int remove_cc_from_host(uint8_t, uint16_t); -static int remove_all_cc_from_host(uint8_t); - -static int create_host_cc(const char *); -static void check_host(const char *); -static void check_all_host(); -static void stop_all_host(); - -/* cc list entry funcs */ -static int clean_cc_list(wusb_cc_list_t *, void *); -static int print_cc_list(wusb_cc_list_t *, void *); -static int copy_cc_list(wusb_cc_list_t *, void *); -static int write_cc_list(wusb_cc_list_t *, void *); - -/* door service utility funcs */ -static void door_srv(void *, char *, size_t, door_desc_t *, uint_t); -static int wusbd_check_auth(const char *); - - -/* daemon log utilities */ -static void wusbd_info(const char *, ...); -static void wusbd_warn(const char *, ...); -static void wusbd_log(const char *, ...); - -/* host-id / dev-id util funcs */ -static uint8_t assign_host_id(void); -static uint16_t assign_dev_id(uint8_t); -static void free_dev_id(uint8_t, uint16_t); - -static int get_host_path(int, char *); - -static int load_host_mac(const char *, uint8_t *); - -/* searching helper funcs */ -static int find_host_id(uint8_t *); -static wusb_cc_info_t *find_dev_cc(uint8_t, uint8_t *); -static wusb_cc_info_t *find_host_cc(uint8_t); -static void copy_list_back(char *); - - -/* enable/disable host funcs */ -static int start_host(const char *); -static int stop_host(const char *); - - -/* remove dev funcs */ -static int remove_one_dev(uint8_t, uint16_t); -static int remove_all_dev(uint8_t); - -/* dev_ctrl check funcs */ -static uint16_t check_dev_ctrl(wusb_dev_ctrl_t *); -static uint16_t check_host_ctrl(wusb_dev_ctrl_t *); - -static int wusbd_do_ca(const char *, const char *, wusb_cc_info_t *, char); -static int wusbd_do_host(char *, size_t, door_desc_t *, uint_t, int); - -/* cc generation methods */ -static int generate_wusb_CDID(CK_SESSION_HANDLE, wusb_cc_t *); -static int generate_wusb_CK(CK_SESSION_HANDLE, wusb_cc_t *); -static int generate_wusb_CC(wusb_cc_t *); -static int generate_wusb_CHID(wusb_cc_t *, uint8_t *); - -static int wusbd_do_list(char *, size_t, door_desc_t *, uint_t); -static int wusbd_do_association(char *, size_t, door_desc_t *, uint_t); -static int wusbd_do_remove_host(char *, size_t, door_desc_t *, uint_t); -static int wusbd_do_remove_dev(char *, size_t, door_desc_t *, uint_t); -static int wusbd_do_enable_host(char *, size_t, door_desc_t *, uint_t); -static int wusbd_do_disable_host(char *, size_t, door_desc_t *, uint_t); - -typedef struct { - const char *auth; - int (* dfunc)(char *, size_t, door_desc_t *, uint_t); -} wusbd_door_func_t; -static wusbd_door_func_t dfuncs[] = -{ - { WUSB_AUTH_READ, wusbd_do_list }, - { WUSB_AUTH_MODIFY, wusbd_do_association }, - { WUSB_AUTH_MODIFY, wusbd_do_remove_dev }, - { WUSB_AUTH_HOST, wusbd_do_remove_host }, - { WUSB_AUTH_HOST, wusbd_do_enable_host }, - { WUSB_AUTH_HOST, wusbd_do_disable_host }, -}; - - -static void -wusbd_sig_handler(int sigval) -{ - wusbd_info("received signal %d\n", sigval); - switch (sigval) { - case 0: - case SIGPIPE: - wusbd_info("SIG PIPE received"); - break; - - case SIGHUP: - wusbd_info("Refreshing dameon"); - /* Refresh config was triggered */ - refresh(sigval); - break; - - default: - (void) pthread_mutex_lock(&mutex_cclock); - wusbd_info("Stop all host before exit"); - stop_all_host(); - (void) pthread_mutex_unlock(&mutex_cclock); - exit_clean(0); - break; - } - -} - - -/* - * Daemon. - * use "--daemon" to start daemon - */ -void -daemonize() { - - int pfd = -1; - - struct sigaction act; - sigset_t set; - - openlog("wusbd", LOG_PID | LOG_NDELAY, LOG_DAEMON); - - (void) sigfillset(&set); - (void) sigdelset(&set, SIGABRT); - - (void) sigfillset(&act.sa_mask); - act.sa_handler = wusbd_sig_handler; - act.sa_flags = 0; - - (void) sigaction(SIGTERM, &act, NULL); - (void) sigaction(SIGHUP, &act, NULL); - (void) sigaction(SIGINT, &act, NULL); - (void) sigaction(SIGPIPE, &act, NULL); - - (void) sigdelset(&set, SIGTERM); - (void) sigdelset(&set, SIGHUP); - (void) sigdelset(&set, SIGINT); - (void) sigdelset(&set, SIGPIPE); - - pfd = wusbd_daemonize_init(); - - wusbd_info("daemonize: start daemon "); - if (pthread_mutex_init(&mutex_cclock, NULL) != 0) { - wusbd_log("daemonize: mutext cclock init failed!"); - exit(FATAL_ERROR); - } - if (init_daemon_pid() < 0) { - wusbd_log("daemonize: init daemon pid fail"); - goto fail; - } - if (init_global_cc_list() < 0) { - wusbd_log("daemonize: init global cc fail"); - goto fail; - } - - check_all_host(); - - if (init_sys_evnt() < 0) { - wusbd_log("daemonize: init sys evnt fail"); - goto fail; - } - - if (init_door_srv() < 0) { - wusbd_log("daemonize: init door serv fail"); - goto fail; - } - - wusbd_daemonize_fini(pfd, 0); - - /*CONSTCOND*/ - while (1) { - (void) pause(); - } -fail: - - exit_clean(FATAL_ERROR); -} - -/* Respond client's list request. */ -/*ARGSUSED*/ -static int -wusbd_do_list(char *argp, size_t arg_size, - door_desc_t *dp, uint_t n_desc) -{ - - char *buf = NULL; - size_t buflen = 0; - - uint16_t rval = WUSBADM_OK; - wusbd_daemon_enter(); - - /* update CC status */ - clean_all_cc_list(); - update_all_cc_list(); - - /* 2 bytes command result */ - buflen += sizeof (uint16_t); - - /* 4 bytes cc list number */ - buflen += sizeof (uint32_t); - - /* length of all clists */ - buflen += sizeof (wusb_device_info_t) * cc_cnt; - - /* use alloca here */ - if ((buf = (char *)alloca(buflen)) == NULL) { - wusbd_warn("wusb_do_list: alloca buffer failed"); - - rval = WUSBADM_FAILURE; - wusbd_daemon_leave((char *)&rval, sizeof (uint16_t)); - - return (WUSBA_FAILURE); - } - bzero(buf, buflen); - - /* command result */ - (void) memcpy(buf, &rval, sizeof (uint16_t)); - - /* cc number */ - (void) memcpy(buf + sizeof (uint16_t), &cc_cnt, sizeof (uint32_t)); - - /* wusb_device_info_t * cc_cnt */ - copy_list_back(buf + sizeof (uint16_t) + sizeof (uint32_t)); - - /* debug only */ - global_list_iterate(print_cc_list, NULL); - - /* - * Update the cc file because we may get the device type if - * device is connected - */ - (void) update_cc_file(); - - wusbd_daemon_leave(buf, buflen); - - return (WUSBA_SUCCESS); - -} - -/* Respond client's associate request. */ -/* ARGSUSED */ -static int -wusbd_do_association(char *argp, size_t arg_size, - door_desc_t *dp, uint_t n_desc) -{ - uint16_t rval = WUSBADM_OK; - wusb_cc_info_t *host_cc = NULL; - wusb_door_call_t *dcall; - wusb_asso_ctrl_t *asso_ctrl; - char host_path[MAXPATHLEN]; - - /* get associate request */ - /* LINTED E_BAD_PTR_CAST_ALIGN */ - dcall = (wusb_door_call_t *)argp; - asso_ctrl = (wusb_asso_ctrl_t *)dcall->buf; - - wusbd_daemon_enter(); - - /* check if host id exist */ - if ((host_cc = find_host_cc(asso_ctrl->host)) == NULL) { - wusbd_warn("wusbd_do_association:asso_ctrl.host = %d err = %s", - asso_ctrl->host, strerror(errno)); - rval = WUSBADM_INVAL_HOSTID; - goto done; - } - if (get_host_path(asso_ctrl->host, host_path) < 0) { - wusbd_warn("wusbd_do_association:host = %d not attached", - asso_ctrl->host); - rval = WUSBADM_HOST_NOT_ATTACH; - goto done; - } - - /* check if it is cable device */ - if (asso_ctrl->type != ASSO_TYPE_CABLE) { - wusbd_warn("wusbd_do_association: asso_ctrl.type = %d", - asso_ctrl->type); - rval = WUSBADM_NO_SUPPORT; - goto done; - } - /* do assocation now */ - if (wusbd_do_ca(host_path, asso_ctrl->path, - host_cc, asso_ctrl->onetime) < 0) { - wusbd_warn("wusbd_do_association: wusbd_do_ca failed"); - rval = WUSBADM_FAILURE; - goto done; - } - -done: - wusbd_daemon_leave((char *)&rval, sizeof (uint16_t)); - - return (rval); -} - -/* Respond client's remove-dev request. */ -/* ARGSUSED */ -static int -wusbd_do_remove_dev(char *argp, size_t arg_size, - door_desc_t *dp, uint_t n_desc) -{ - wusb_door_call_t *dcall; - wusb_dev_ctrl_t *rmctrl; - uint16_t rval = WUSBADM_OK; - - /* LINTED E_BAD_PTR_CAST_ALIGN */ - dcall = (wusb_door_call_t *)argp; - /* LINTED E_BAD_PTR_CAST_ALIGN */ - rmctrl = (wusb_dev_ctrl_t *)dcall->buf; - - wusbd_daemon_enter(); - - if ((rval = check_dev_ctrl(rmctrl)) != WUSBADM_OK) { - wusbd_warn("wusbd_do_remove_dev: dev-id = %d.%d failed", - rmctrl->host, rmctrl->dev); - goto done; - } - - if (rmctrl->dev) { - /* remove only one device */ - if (remove_one_dev(rmctrl->host, rmctrl->dev) < 0) { - wusbd_warn("wusbd_do_remove_dev: dev-id = %d.%d failed", - rmctrl->host, rmctrl->dev); - rval = WUSBADM_FAILURE; - goto done; - } - } else { - /* remove all the device associated to the host */ - if (remove_all_dev(rmctrl->host) < 0) { - wusbd_warn("wusbd_do_remove_dev: host-id = %d failed", - rmctrl->host); - rval = WUSBADM_FAILURE; - goto done; - } - } - - if (update_cc_file() < 0) { - wusbd_warn("wusbd_do_remove_dev: update cc file failed"); - rval = WUSBADM_CCSTORE_ACC; - goto done; - } - - -done: - wusbd_daemon_leave((char *)&rval, sizeof (uint16_t)); - - return (rval); -} - -/* Respond client's remove-host request. */ -/* ARGSUSED */ -static int -wusbd_do_remove_host(char *argp, size_t arg_size, - door_desc_t *dp, uint_t n_desc) -{ - wusb_door_call_t *dcall; - wusb_dev_ctrl_t *host_ctrl; - uint16_t rval = WUSBADM_OK; - - char host_path[MAXPATHLEN]; - - wusbd_daemon_enter(); - /* LINTED E_BAD_PTR_CAST_ALIGN */ - dcall = (wusb_door_call_t *)argp; - /* LINTED E_BAD_PTR_CAST_ALIGN */ - host_ctrl = (wusb_dev_ctrl_t *)dcall->buf; - wusbd_info("wusbd_do_remove_host start: hostid = %d", host_ctrl->host); - - if ((rval = check_host_ctrl(host_ctrl)) != WUSBADM_OK) { - wusbd_warn("wusbd_do_remove_host :host_ctrl->host = %d failed", - host_ctrl->host); - goto done; - } - - if (remove_all_dev(host_ctrl->host) < 0) { - wusbd_warn("wusbd_do_remove_host :host_ctrl->host = %d failed", - host_ctrl->host); - rval = WUSBADM_FAILURE; - goto done; - } - - if (get_host_path(host_ctrl->host, host_path) < 0) { - wusbd_warn("wusbd_do_host:host_ctrl->host = %d not attached", - host_ctrl->host); - } else { - - /* - * Stop host if possible, if the host can not - * be stoped we just remove the host cc from - * system, this means the host should be re-plugged - * before any new association since the CHID info is - * gone. - */ - if (stop_host(host_path) < 0) { - wusbd_warn("wusbd_do_remove_host: host_path = %s", - host_path); - } - } - - /* remove the last CC for host */ - remove_from_global_list(devids[host_ctrl->host][0]); - free_dev_id(host_ctrl->host, 0); - - if (update_cc_file() < 0) { - wusbd_warn("wusbd_do_remove_host: update cc failed"); - rval = WUSBADM_CCSTORE_ACC; - goto done; - } - wusbd_info("wusbd_do_remove_host complete "); - -done: - wusbd_daemon_leave((char *)&rval, sizeof (uint16_t)); - - return (rval); - - -} - -/* Respond client's enable-host request. */ -static int -wusbd_do_enable_host(char *argp, size_t arg_size, - door_desc_t *dp, uint_t n_desc) -{ - (void) wusbd_do_host(argp, arg_size, dp, n_desc, 1); - - return (WUSBA_SUCCESS); -} - -/* Respond client's disable-host request. */ -static int -wusbd_do_disable_host(char *argp, size_t arg_size, - door_desc_t *dp, uint_t n_desc) -{ - (void) wusbd_do_host(argp, arg_size, dp, n_desc, 0); - - return (WUSBA_SUCCESS); -} - -/* - * wusbd_do_host is the only wrapper for any host related cmds. - * It will call door_return, so it will - * not return and its return val should be omitted by callers - */ -/* ARGSUSED */ -static int -wusbd_do_host(char *argp, size_t arg_size, - door_desc_t *dp, uint_t n_desc, int flag) -{ - wusb_door_call_t *dcall; - wusb_dev_ctrl_t *host_ctrl; - uint16_t rval = WUSBADM_OK; - - char host_path[MAXPATHLEN]; - - /* LINTED E_BAD_PTR_CAST_ALIGN */ - dcall = (wusb_door_call_t *)argp; - /* LINTED E_BAD_PTR_CAST_ALIGN */ - host_ctrl = (wusb_dev_ctrl_t *)dcall->buf; - - wusbd_daemon_enter(); - if ((rval = check_host_ctrl(host_ctrl)) != WUSBADM_OK) { - wusbd_warn("wusbd_do_host: host-id = %d failed", - host_ctrl->host); - goto done; - } - - if (get_host_path(host_ctrl->host, host_path) < 0) { - wusbd_warn("wusbd_do_host:host_ctrl->host = %d not attached", - host_ctrl->host); - rval = WUSBADM_HOST_NOT_ATTACH; - goto done; - } - - wusbd_info("wusbd_do_host: host = %s flag = %d", host_path, flag); - if (!flag) { - if (stop_host(host_path) < 0) { - wusbd_warn("wusbd_do_host: host_path = %s stop failed", - host_path); - rval = WUSBADM_HOST_NOT_ATTACH; - goto done; - } - } else { - (void) add_all_cc_to_host(host_path, host_ctrl->host); - /* start the host */ - if (start_host(host_path) < 0) { - wusbd_warn("wusbd_do_host: host = %s start failed", - host_path); - rval = WUSBADM_HOST_NOT_ATTACH; - goto done; - } - - } - -done: - wusbd_daemon_leave((char *)&rval, sizeof (uint16_t)); - - return (rval); - - -} -/* - * door server handler - * Do not allocate memory dynamically in this function. Upon - * door_return(), the server is blocked in the kernel context. No - * place to free that memory. see - * http://blogs.sun.com/tucker/entry/door_api_details - */ -/* ARGSUSED */ -static void -door_srv(void *cookie, char *argp, size_t arg_size, - door_desc_t *dp, uint_t n_desc) -{ - wusb_door_call_t *dcall; - - uint16_t rval = WUSBADM_FAILURE; - - /* check if it is an valid wusb door call */ - if (argp == NULL || arg_size != sizeof (wusb_door_call_t)) { - - wusbd_warn("door_srv: argp = 0x%p arg_size = %d", - argp, arg_size); - rval = WUSBADM_FAILURE; - goto fail; - } - - /* LINTED E_BAD_PTR_CAST_ALIGN */ - dcall = (wusb_door_call_t *)argp; - - if (dcall->cmdss >= (sizeof (dfuncs)/sizeof (wusbd_door_func_t))) { - wusbd_warn("door_srv: dcall->cmdss = %d", - dcall->cmdss); - rval = WUSBADM_NO_SUPPORT; - - goto fail; - } - - /* chk auths should be done first for any cmd */ - if (wusbd_check_auth(dfuncs[dcall->cmdss].auth) < 0) { - wusbd_warn("door_srv: cmdss = %d, auth = %s", - dcall->cmdss, dfuncs[dcall->cmdss].auth); - rval = WUSBADM_AUTH_FAILURE; - - goto fail; - } - - - /* - * Any wusbd_do_xx will return the door service - */ - dfuncs[dcall->cmdss].dfunc(argp, arg_size, dp, n_desc); - - return; - -fail: - (void) door_return((char *)&rval, sizeof (uint16_t), NULL, 0); - -} - -/* - * Check the status of every CC. And update it in the list so that - * client can know if it's connected/disconnected. - */ -static void -update_cc_list(const char *host) -{ - uint8_t mac[WUSB_DEV_MAC_LENGTH]; - wusb_hc_get_dstate_t dstate; - wusb_cc_list_t *list = NULL; - int hostid = 0; - int hstate = -1; - int fd = -1; - int i; - - wusbd_info("update_cc_list: host = %s", host); - if (load_host_mac(host, mac) < 0) { - wusbd_warn("update_cc_list: host = %s failed", host); - - return; - } - - if ((hostid = find_host_id(mac)) == 0) { - - return; - } - - if ((fd = open(host, O_RDONLY)) == -1) { - wusbd_warn("update_cc_list: host = %s, err = %s", - host, strerror(errno)); - - return; - } - - /* update host states */ - if (ioctl(fd, WUSB_HC_GET_HSTATE, &hstate) < 0) { - wusbd_warn("update_cc_list: WUSB_HC_GET_HSTATE, err = %s", - strerror(errno)); - (void) close(fd); - - return; - } - - list = devids[hostid][0]; - list->stat = hstate; - - bzero(&dstate, sizeof (wusb_hc_get_dstate_t)); - - for (i = 1; i < DEV_MAX; i++) { - if ((list = devids[hostid][i]) == NULL) { - continue; - } - (void) memcpy(dstate.cdid, list->info.cc.CDID, 16); - if (ioctl(fd, WUSB_HC_GET_DSTATE, &dstate) == 0) { - list = devids[hostid][i]; - list->stat = dstate.state; - if (dstate.state == WUSB_STATE_CONFIGURED) { - (void) snprintf(list->info.type, WUSB_TYPE_LEN, - "%s", dstate.nodename); - } - wusbd_info("update_cc_list: type = %s, state = %d", - dstate.nodename, dstate.state); - } - - } - - (void) close(fd); -} -/* find the host cc infor with host id */ -static wusb_cc_info_t * -find_host_cc(uint8_t host_id) -{ - wusb_cc_list_t *list = NULL; - - if (host_id == 0 || host_id >= HOST_MAX) { - - return (NULL); - } - - list = devids[host_id][0]; - - return (list? &(list->info):NULL); -} - -/* find the device CDID with host id */ -static wusb_cc_info_t * -find_dev_cc(uint8_t host_id, uint8_t *CDID) -{ - wusb_cc_list_t *list = NULL; - int j = 0; - - for (j = 1; j < DEV_MAX; j++) { - list = devids[host_id][j]; - if (list && (memcmp(list->info.cc.CDID, CDID, 16) == 0)) { - - return (&list->info); - } - } - return (NULL); -} - -/* find the host id with mac address */ -static int -find_host_id(uint8_t *mac) -{ - wusb_cc_list_t *list = NULL; - int i = 0; - - for (i = 1; i < HOST_MAX; i++) { - list = devids[i][0]; - if (list && memcmp(mac, - list->info.mac, WUSB_DEV_MAC_LENGTH) == 0) { - return (i); - } - } - - return (0); -} - -/* Save the cc infor from dame to /etc/usb/wusbcc */ -static int -update_cc_file() -{ - int ccfd = -1; - - if ((ccfd = open(WUSB_CC, O_RDWR|O_TRUNC)) < 0) { - wusbd_warn("update_cc_file: CC store file = %s, %s", - WUSB_CC, strerror(errno)); - - return (WUSBA_FAILURE); - } - - global_list_iterate(write_cc_list, &ccfd); - (void) close(ccfd); - - return (WUSBA_SUCCESS); - -} -/* - * ca_****: Cable Assocation helpers - * to setup an association for host and device - */ -static int -ca_get_info(int fd, wusb_cbaf_asso_info_t *first) -{ - bzero(first, sizeof (wusb_cbaf_asso_info_t)); - if (0 != ioctl(fd, CBAF_IOCTL_GET_ASSO_INFO, first)) { - wusbd_warn("ca_get_info: CBAF_IOCTL_GET_ASSO_INFO: err = %s", - strerror(errno)); - - return (WUSBA_FAILURE); - } - - return (WUSBA_SUCCESS); -} - -static int -ca_set_host(int fd, wusb_cc_info_t *info) -{ - wusb_cbaf_host_info_t host_info; - - host_info.AssociationTypeId = 1; - host_info.AssociationSubTypeId = 0; - host_info.LangID = 0; - - (void) memcpy(host_info.CHID, info->cc.CHID, 16); - (void) memset(host_info.HostFriendlyName, 0, 64); - - mac_to_label(info->mac, host_info.HostFriendlyName); - - if (0 != ioctl(fd, CBAF_IOCTL_SET_HOST_INFO, &host_info)) { - wusbd_warn("ca_set_host: CBAF_IOCTL_SET_HOST_INFO: err = %s", - strerror(errno)); - - return (WUSBA_FAILURE); - } - - return (WUSBA_SUCCESS); -} - -static int -ca_get_req(int fd, wusb_cbaf_asso_info_t *first) -{ - void *ca_buf; - wusb_cbaf_asso_info_t *ca_info; - - wusbd_info("ca_get_req: NumAssociates = %d", - first->NumAssociationRequests); - - ca_buf = malloc(sizeof (wusb_cbaf_asso_info_t) + - first->NumAssociationRequests * sizeof (wusb_cbaf_asso_req_t)); - - if (ca_buf == NULL) { - wusbd_warn("ca_get_req: ca_buf = NULL"); - - return (WUSBA_FAILURE); - } - - ca_info = (wusb_cbaf_asso_info_t *)ca_buf; - (void) memcpy(ca_info, first, sizeof (wusb_cbaf_asso_info_t)); - - if (0 != ioctl(fd, CBAF_IOCTL_GET_ASSO_REQS, ca_buf)) { - wusbd_warn("ca_get_req: CBAF_IOCTL_GET_ASSO_REQS: err = %s", - strerror(errno)); - free(ca_info); - - return (WUSBA_FAILURE); - } - /* currently not used */ - free(ca_buf); - - return (WUSBA_SUCCESS); - -} - -static int -ca_get_devinfo(int fd, wusb_cbaf_device_info_t *device_info) -{ - bzero(device_info, sizeof (wusb_cbaf_device_info_t)); - if (0 != ioctl(fd, CBAF_IOCTL_GET_DEVICE_INFO, device_info)) { - wusbd_warn("ca_get_dev failed"); - - return (WUSBA_FAILURE); - } - wusbd_info("ca_get_devinfo: DeviceFriendlyName = %s", - device_info->DeviceFriendlyName); - wusbd_info("ca_get_devinfo: bandgroup = %d", - device_info->BandGroups); - wusbd_info("ca_get_devinfo: LangID = %d", - device_info->LangID); - - print_array("CDID from device", device_info->CDID, 16); - - return (WUSBA_SUCCESS); -} - -static int -ca_connect_cc(int fd, wusb_cc_info_t *newinfo, - wusb_cbaf_device_info_t *device_info) -{ - wusb_cbaf_cc_data_t cc_data; - - cc_data.AssociationTypeId = 1; - cc_data.AssociationSubTypeId = 1; - cc_data.Length = WUSB_CC_DATA_SIZE; - cc_data.BandGroups = device_info->BandGroups; - (void) memcpy(&(cc_data.CC), &(newinfo->cc), sizeof (wusb_cc_t)); - - - if (0 != ioctl(fd, CBAF_IOCTL_SET_CONNECTION, &cc_data)) { - wusbd_warn("ca_connect_cc: CBAF_IOCTL_SET_CONNECTION: err = %s", - strerror(errno)); - - return (WUSBA_FAILURE); - } - print_array("New CC to device", cc_data.CC.CHID, 48); - - return (WUSBA_SUCCESS); -} - -static int -ca_create_cc(wusb_cc_info_t *newinfo, wusb_cc_info_t *host_cc) -{ - (void) memcpy(newinfo->cc.CHID, host_cc->cc.CHID, 16); - - if (generate_wusb_CC(&(newinfo->cc)) < 0) { - wusbd_warn("ca_create_cc: generate cc failed!"); - - return (WUSBA_FAILURE); - } - - return (WUSBA_SUCCESS); -} - -static int -ca_add_cc(wusb_cc_info_t *newinfo, const char *filename) -{ - int fd = -1; - int hstate = -1; - - wusbd_info("ca_add_cc: filename = %s start", filename); - - if ((fd = open(filename, O_RDONLY)) == -1) { - wusbd_warn("ca_add_cc: filename = %s, err = %s", - filename, strerror(errno)); - - return (WUSBA_FAILURE); - } - if (ioctl(fd, WUSB_HC_ADD_CC, &(newinfo->cc)) != 0) { - wusbd_warn("ca_add_cc: ioctl = WUSB_HC_ADD_CC, err = %s", - strerror(errno)); - goto fail; - } - if (ioctl(fd, WUSB_HC_GET_HSTATE, &hstate) < 0) { - wusbd_warn("ca_add_cc: ioctl = WUSB_HC_GET_HSTATE, err = %s", - strerror(errno)); - goto fail; - } - if (hstate != WUSB_HC_STARTED) { - if (ioctl(fd, WUSB_HC_START, WUSB_HC_INITIAL_START) == -1) { - wusbd_warn("ca_add_cc: ioctl = WUSB_HC_START, err = %s", - strerror(errno)); - goto fail; - } - } - - (void) close(fd); - - print_array("New CC to host", newinfo->cc.CHID, 48); - - return (WUSBA_SUCCESS); - -fail: - (void) close(fd); - - return (WUSBA_FAILURE); -} - -static int -ca_save_cc(wusb_cc_info_t *newinfo, wusb_cc_info_t *hostinfo) -{ - newinfo->host = hostinfo->host; - if ((newinfo->dev = assign_dev_id(newinfo->host)) == 0) { - wusbd_warn("ca_save_cc: host-id:%d", newinfo->host); - - return (WUSBA_FAILURE); - } - - if (save_cc(newinfo) < 0) { - wusbd_warn("ca_save_cc: save cc failed"); - - return (WUSBA_FAILURE); - } - - return (WUSBA_SUCCESS); -} - -static int -wusbd_do_ca(const char *host_path, const char *ca_dev, - wusb_cc_info_t *host_cc, char onetime) -{ - wusb_cbaf_asso_info_t first; - wusb_cbaf_device_info_t device_info; - wusb_cc_info_t newinfo; - int fd; - wusb_cc_info_t *old_cc = NULL; - - wusbd_info("wusbd_do_ca start\n"); - /* IMPORTANT: Do NOT open it with O_RDWR */ - fd = open(ca_dev, O_RDONLY); - if (fd == -1) { - wusbd_warn("wusbd_do_ca: ca_dev = %s err = %s", ca_dev, - strerror(errno)); - - return (WUSBA_FAILURE); - } - /* - * The first parts to set up a cable associaiton. - * Refer to: [Association Models Supplement to the - * Certified Wireless Universal Serial Bus Specification] - * chapter 4. - * - * 1. Send GET_ASSOCIATION_INFORMATION to the cable device - * and get the number of association requests. - * - * 2. Send GET_ASSOCIATION_INFORMATION again to get the - * all the association requests. - * - * 3. Send SET_ASSOCIATION_RESPONSE with the host CHID - * - * 4. Send GET_ASSOCIATION_REQUEST to get the exisiting CC - * infor from the device. - * - */ - if (ca_get_info(fd, &first) < 0) { - wusbd_warn("wusbd_do_ca: get asso info failed!"); - goto cleanup; - } - if (ca_get_req(fd, &first) < 0) { - wusbd_warn("wusbd_do_ca: get asso req failed!"); - goto cleanup; - } - if (ca_set_host(fd, host_cc)) { - wusbd_warn("wusbd_do_ca: set host info failred"); - goto cleanup; - } - if (ca_get_devinfo(fd, &device_info)) { - wusbd_warn("wusbd_do_ca: get device infor failed"); - goto cleanup; - } - - - (void) snprintf(newinfo.type, WUSB_TYPE_LEN, "unknown"); - newinfo.flag = onetime; - - /* - * The second part to setup cable association. - * - * 1. Create a CC from exsiting host_cc for the devices - * - * 2. Send new cc to the cable device to save in its hardware - * - * 3. Add new cc to the host controller - * - * 4. Save the cc to the cc list and cc store file - * - * Done! - */ - if (ca_create_cc(&newinfo, host_cc) < 0) { - wusbd_warn("wusbd_do_ca: ca create cc failed!"); - goto cleanup; - } - /* - * Check if CDID exist in the host cc list, if so, We need to update - * the exisiting cc infor with a new ck, do the association with the - * updated cc. - * See "Association Models Supplement to the WUSB Specification" - * Chapter 4 - */ - old_cc = find_dev_cc(host_cc->host, device_info.CDID); - if (old_cc) { - wusbd_warn("wusbd_do_ca: Association exist, use old CDID"); - (void) remove_cc_from_host(old_cc->host, old_cc->dev); - - /* update old cc with the new ck and copy back */ - (void) memcpy(old_cc->cc.CK, newinfo.cc.CK, 16); - (void) memcpy(&(newinfo.cc), &(old_cc->cc), sizeof (wusb_cc_t)); - } - if (ca_connect_cc(fd, &newinfo, &device_info) < 0) { - wusbd_warn("wusbd_do_ca: ca connect cc failed!"); - goto cleanup; - } - - (void) close(fd); - - if (ca_add_cc(&newinfo, host_path) < 0) { - wusbd_warn("wusbd_do_ca: ca add cc failed!"); - - return (WUSBA_FAILURE); - } - - if (!old_cc) { - /* a new cc save to file */ - if (ca_save_cc(&newinfo, host_cc) < 0) { - wusbd_warn("wusbd_do_ca: ca save cc failed!"); - - return (WUSBA_FAILURE); - } - } else { - /* Just update the cc file */ - if (update_cc_file() < 0) { - wusbd_warn("wusbd_do_ca: update old cc failed"); - - return (WUSBA_FAILURE); - } - } - - wusbd_info("wusbd_do_ca: Set cable connection complete!"); - - return (WUSBA_SUCCESS); - -cleanup: - (void) close(fd); - - return (WUSBA_FAILURE); -} -/* - * wusb cc infor generation helpers - * generate_wusb_CC: Generate CC infor for a device and host - * generate_wusb_CHID: Generate CHID for a host - * generate_wusb_CDID: Generate CDID for a device - * generate_wusb_CK : Generate CK for an assocation - */ - -static int -generate_wusb_CC(wusb_cc_t *cc) -{ - CK_SESSION_HANDLE pkhandle; - KMF_HANDLE_T kmfhandle; - int rval = WUSBA_SUCCESS; - wusbd_info("generate_wusb_CC: start"); - - if (wusb_crypto_init(&kmfhandle, &pkhandle, PKTOKEN, TOKENDIR) != 0) { - wusbd_warn("generate_wusb_CC: Crypto init failed"); - - return (WUSBA_FAILURE); - } - if (generate_wusb_CDID(pkhandle, cc) < 0) { - wusbd_warn("generate_wusb_CC: crate cdid failed"); - rval = WUSBA_FAILURE; - - goto done; - } - if (generate_wusb_CK(pkhandle, cc) < 0) { - wusbd_warn("generate_wusb_CC: crate ck failed"); - rval = WUSBA_FAILURE; - - goto done; - } -done: - wusb_crypto_fini(kmfhandle); - - wusbd_info("generate_wusb_CC: complete"); - - return (rval); -} - - -static int -generate_wusb_CHID(wusb_cc_t *cc, uint8_t *mac) -{ - /* - * CHID construction : - * 0 - 5 : MAC serial - * 6 - 7 : arbitrary - * 8 - 15 : random from seed = (MAC..) || (hostid||time)) || hrtime - */ - uint8_t *p = cc->CHID; - uint8_t seed[24]; - time_t tt; - uint64_t prod, hrtime; - int rval = WUSBA_SUCCESS; - - KMF_HANDLE_T kmfhandle; - CK_SESSION_HANDLE pkhandle; - - wusbd_info("generate_wusb_CHID: start"); - if (wusb_crypto_init(&kmfhandle, &pkhandle, PKTOKEN, TOKENDIR) != 0) { - wusbd_warn("generate_wusb_CHID: Crypto init failed"); - rval = WUSBA_FAILURE; - goto done; - } - - (void) memcpy(p, mac, WUSB_DEV_MAC_LENGTH); - p += 8; - - (void) time(&tt); - prod = gethostid(); - prod = (prod << 32) | tt; - hrtime = gethrtime(); - - (void) memcpy(seed, cc->CHID, 8); - (void) memcpy(seed + 8, &prod, 8); - (void) memcpy(seed + 16, &hrtime, 8); - - if (wusb_random(pkhandle, seed, 24, p, 8) < 0) { - wusbd_warn("generate_wusb_CHID: random failed"); - rval = WUSBA_FAILURE; - } - wusb_crypto_fini(kmfhandle); - wusbd_info("generate_wusb_CHID complete"); -done: - - return (rval); -} - -static int -generate_wusb_CDID(CK_SESSION_HANDLE pkhandle, wusb_cc_t *cc) -{ - /* TODO : need better generation mechanism */ - return (wusb_random(pkhandle, NULL, 0, cc->CDID, 16)); - -} - -static int -generate_wusb_CK(CK_SESSION_HANDLE pkhandle, wusb_cc_t *cc) -{ - /* TODO : need better generation mechanism */ - return (wusb_random(pkhandle, NULL, 0, cc->CK, 16)); -} - -/* Log to dmesg and smf log */ -static void -wusbd_warn(const char *format, ...) -{ - va_list alist; - - format = gettext(format); - va_start(alist, format); - (void) fprintf(stderr, gettext("[WUSBD]")); - (void) vfprintf(stderr, format, alist); - (void) fputc('\n', stderr); - va_end(alist); -} -static void -wusbd_log(const char *format, ...) -{ - va_list alist; - - format = gettext(format); - va_start(alist, format); - (void) vsyslog(LOG_WARNING, format, alist); - va_end(alist); -} - - -/* Log to smf log in DEBUG version */ -/* ARGSUSED */ -static void -wusbd_info(const char *format, ...) -{ -#ifdef DEBUG - va_list alist; - - format = gettext(format); - va_start(alist, format); - (void) fprintf(stderr, gettext("[WUSBD]")); - (void) vfprintf(stderr, format, alist); - (void) fputc('\n', stderr); - va_end(alist); -#endif -} - -/* - * Find an unused host id and return it. - * The wusbadm use two digits to represent a host. This means - * hostid can't be greater than 99. - */ -static uint8_t -assign_host_id(void) -{ - uint8_t i; - for (i = 1; i < HOST_MAX; i++) { - if (devids[i][0] == 0) { - wusbd_info("assign_host_id: rval = %d", i); - - return (i); - } - } - - return (0); /* illegal value */ -} - -/* - * traverse the CC store, search in the specified host, - * find an unused device id, return it. - * The wusbadm use 3 digits to represent a device. This means - * devid can't be greater than 999. - */ -static uint16_t -assign_dev_id(uint8_t hostid) -{ - uint16_t i; - if (hostid >= HOST_MAX) { - - return (0); - } - for (i = 1; i < DEV_MAX; i++) { - if (devids[hostid][i] == 0) { - wusbd_info("assign_dev_id: devid = %d.%d", hostid, i); - - return (i); - } - } - - return (0); /* illegal value */ -} - -/* Release a dev id, eg: remove dev */ -static void -free_dev_id(uint8_t hostid, uint16_t devid) -{ - if (hostid >= HOST_MAX || devid >= DEV_MAX) { - - return; - } - devids[hostid][devid] = 0; -} - -/* - * init_door_srv. - * Create the door file and attach door service - * to the door file - */ -static int -init_door_srv() -{ - int fd, dd; - - (void) fdetach(DOOR_FILE); - (void) unlink(DOOR_FILE); - - if ((dd = door_create(door_srv, 0, 0)) < 0) { - wusbd_warn("init_door_srv: door_creat: err = %s", - strerror(errno)); - - goto fail; - } - if ((fd = creat(DOOR_FILE, S_IRUSR | S_IRGRP | S_IROTH)) < 0) { - wusbd_warn("init_door_srv: creat: err = %s", - strerror(errno)); - - goto fail; - } - - (void) close(fd); - - wusbd_info("init_door_srv: file = %s created", DOOR_FILE); - - if (fattach(dd, DOOR_FILE) < 0) { - wusbd_warn("init_door_srv: fattach err = %s", - strerror(errno)); - - goto fail; - } - - return (WUSBA_SUCCESS); -fail: - - return (WUSBA_FAILURE); -} - - -/* Print a cc list entry */ -/* ARGSUSED */ -static int -print_cc_list(wusb_cc_list_t *list, void *data) -{ - wusbd_info("list:%x", list); - wusbd_info("\thostid:%x", list->info.host); - wusbd_info("\tdevid:%x", list->info.dev); - - return (WUSBA_SUCCESS); -} - -/* write a cc list entry back to file fd */ -static int -write_cc_list(wusb_cc_list_t *list, void *data) -{ - int ccfd = *((int *)data); - wusbd_info("write_cc_list: host-id = %d dev-id = %d", - list->info.host, list->info.dev); - - if (list->info.flag) { - - return (WUSBA_SUCCESS); - } - if (write(ccfd, &(list->info), sizeof (wusb_cc_info_t)) != - sizeof (wusb_cc_info_t)) { - wusbd_warn("write_cc_list: write err = %s ", - strerror(errno)); - - return (WUSBA_FAILURE); - } - - return (WUSBA_SUCCESS); -} - -/* clean up the status of the cc list entry */ -/* ARGSUSED */ -static int -clean_cc_list(wusb_cc_list_t *list, void *data) -{ - list->stat = list->info.dev? DEV_STAT_DISCONN:WUSB_HC_DISCONNTED; - - return (WUSBA_SUCCESS); -} - -/* copy a cc list entry to a device info buffer */ -static int -copy_cc_list(wusb_cc_list_t *list, void *data) -{ - char **buf = (char **)data; - - wusb_device_info_t devinfo; - devinfo.dev = list->info.dev; - devinfo.host = list->info.host; - devinfo.stat = list->stat; - - (void) snprintf(devinfo.type, WUSB_TYPE_LEN, "%s", list->info.type); - (void) memcpy(*buf, &devinfo, sizeof (wusb_device_info_t)); - - *buf += sizeof (wusb_device_info_t); - - return (WUSBA_SUCCESS); - -} - -/* save cc to list and file */ -static int -save_cc(const wusb_cc_info_t *ccinfo) -{ - /* save CC to file */ - if (save_cc_to_store(ccinfo) < 0) { - wusbd_warn("save_cc: Failed to save CC to file"); - - return (WUSBA_FAILURE); - } - - /* save cc to global list */ - if (save_cc_to_list(ccinfo) < 0) { - wusbd_warn("save_cc: Failed to save CC to list"); - - return (WUSBA_FAILURE); - - } - - return (WUSBA_SUCCESS); -} - -/* create cc list entry and add to global list */ -static int -save_cc_to_list(const wusb_cc_info_t *ccinfo) -{ - wusb_cc_list_t *newlist = - (wusb_cc_list_t *)malloc(sizeof (wusb_cc_list_t)); - if (newlist == NULL) { - wusbd_warn("save_cc_to_list: newlist = NULL"); - - return (WUSBA_FAILURE); - } - bzero(newlist, sizeof (wusb_cc_list_t)); - (void) memcpy(&(newlist->info), ccinfo, sizeof (wusb_cc_info_t)); - devids[ccinfo->host][ccinfo->dev] = newlist; - - add_to_global_list(newlist); - - return (WUSBA_SUCCESS); - -} - -/* save cc info to the host */ -static int -save_cc_to_store(const wusb_cc_info_t *ccinfo) -{ - int rval = WUSBA_FAILURE; - int ccfd = -1; - - /* - * If a device association is just used for one time - * we will not save it to the store file. See wusbadm(1) - */ - if (ccinfo->flag) { - - return (WUSBA_SUCCESS); - } - - /* open cc file */ - if ((ccfd = open(WUSB_CC, O_RDWR)) < 0) { - wusbd_warn("save_cc_to_store:CC file = %s, err = %s", - WUSB_CC, strerror(errno)); - goto done; - } - - /* seek to the end of the file */ - if ((rval = lseek(ccfd, 0, SEEK_END)) == (offset_t)-1) { - wusbd_warn("save_cc_to_store: seek fail err = %s", - strerror(errno)); - (void) close(ccfd); - goto done; - } - - /* save ccinfo to cc file */ - if ((rval = write(ccfd, ccinfo, sizeof (wusb_cc_info_t))) != - sizeof (wusb_cc_info_t)) { - wusbd_warn("write to store fail: %s - %d", - strerror(errno), rval); - (void) close(ccfd); - goto done; - } - - (void) close(ccfd); - rval = WUSBA_SUCCESS; - -done: - wusbd_info("save_cc_to_store: complete"); - - return (rval); - -} -/* - * load all the cc to the host controller - * 1. walk thru the cc list and find the device cc info - * related to this host. - * 2. add the cc to the host controller - * 3. start the host controller - */ -static int -add_all_cc_to_host(const char *host_path, uint8_t hostid) -{ - wusb_cc_list_t *list = NULL; - int fd = -1; - int j = 0; - wusbd_warn("add_all_cc_to_host: host = %s", host_path); - /* open host file */ - if ((fd = open(host_path, O_RDONLY)) == -1) { - wusbd_warn("add_all_cc_to_host: host = %s err = %s", - host_path, strerror(errno)); - - return (WUSBA_FAILURE); - } - - /* Find all the device cc and add cc to host controler */ - for (j = 0; j < DEV_MAX; j++) { - if ((list = devids[hostid][j]) == NULL) { - continue; - } - if (ioctl(fd, WUSB_HC_ADD_CC, &list->info.cc) == -1) { - wusbd_warn(" add_all_cc_to_host: ioctl = WUSB_HC_ADD_CC" - "hostid = %d, fail ", hostid); - (void) close(fd); - - return (WUSBA_FAILURE); - } - } - - (void) close(fd); - - wusbd_info("add_all_cc_to_host complete"); - - return (WUSBA_SUCCESS); -} - -/* Remove all the cc infor from a host device */ -static int -remove_all_cc_from_host(uint8_t hostid) -{ - int fd = -1; - int rval = 0; - char host_path[MAXPATHLEN]; - - if (get_host_path(hostid, host_path) < 0) { - wusbd_warn("remove_all_cc_from_host:hostid = %d not attached", - hostid); - - return (WUSBA_FAILURE); - } - - - if ((fd = open(host_path, O_RDONLY)) == -1) { - wusbd_warn("remove_all_cc_from host: host = %s err = %s", - host_path, strerror(errno)); - - return (WUSBA_FAILURE); - } - rval = ioctl(fd, WUSB_HC_STOP, WUSB_HC_REM_ALL_CC | WUSB_HC_FINAL_STOP); - - if (rval < 0) { - wusbd_warn("remove_all_cc_from_host: WUSB_HC_STOP: err = %s", - strerror(errno)); - (void) close(fd); - - return (WUSBA_FAILURE); - } - (void) close(fd); - - return (WUSBA_SUCCESS); -} -/* - * Initialize the global cc list from the store file - * "/etc/usb/wusbcc", the hostid/devid would also be - * set in the global devids - */ -static int -init_global_cc_list(void) -{ - wusb_cc_list_t *list = NULL; - char buf[sizeof (wusb_cc_list_t) + 1]; - int ccfd = -1; - - bzero(devids, HOST_MAX * DEV_MAX * sizeof (wusb_cc_list_t *)); - - /* - * open the cc file. when daemon starts for the first time - * cc file will be created in /etc/usb, all the wusb host - * and device Conection Context informaion is stored in this - * file. global cc list is the map in the dameon for the - * file. - */ - wusbd_info("init_global_cc_list: load cc from %s", WUSB_CC); - if ((ccfd = open(WUSB_CC, O_RDWR|O_CREAT, S_IRUSR | S_IWUSR)) < 0) { - wusbd_warn("init_global_cc_list: CC store file = %s, err = %s", - WUSB_CC, strerror(errno)); - - goto fail; - } - - (void) lseek(ccfd, 0, SEEK_SET); - - /* initialize globle cc list from cc file */ - while ((read(ccfd, buf, sizeof (wusb_cc_info_t))) > 0) { - - list = (wusb_cc_list_t *)calloc(sizeof (wusb_cc_list_t), 1); - - if (list == NULL) { - wusbd_warn("init_global_cc_list: list = NULL"); - (void) close(ccfd); - goto fail; - } - - (void) memcpy(&(list->info), buf, sizeof (wusb_cc_info_t)); - - /* set devids */ - devids[list->info.host][list->info.dev] = list; - - /* add the list to the global cc list */ - add_to_global_list(list); - } - (void) close(ccfd); - - return (WUSBA_SUCCESS); -fail: - - return (WUSBA_FAILURE); -} - -/* destroy the global CC list */ -static void -destroy_global_cc_list(void) -{ - wusb_cc_list_t *list = NULL; - wusb_cc_list_t *next = NULL; - - for (list = global_cclist; list; list = next) { - next = list->next; - free(list); - cc_cnt--; - } - global_cclist = NULL; - wusbd_info("destroy_global_cc_list: cc_cnt = %d", cc_cnt); - cc_cnt = 0; - bzero(devids, HOST_MAX * DEV_MAX * sizeof (wusb_cc_list_t *)); -} - -/* - * Add a new list to the global cc list. - * The new cc list will be inserted in an hostid/devid - * incremental order. - */ -static void -add_to_global_list(wusb_cc_list_t *list) -{ - - wusb_cc_list_t *tmp; - wusb_cc_list_t *next; - - - wusbd_info("add_to_global_list: start"); - wusbd_info("host-id = %d, dev-id = %d, type = %s", - list->info.host, list->info.dev, list->info.type); - - /* first cc list */ - if (global_cclist == NULL) { - global_cclist = list; - list->next = NULL; - - goto done; - } - - /* new cc list header */ - tmp = global_cclist; - if (tmp->info.host > list->info.host) { - list->next = tmp; - global_cclist = list; - goto done; - } - - /* find where to insert the new cc */ - for (tmp = global_cclist; tmp->next; tmp = tmp->next) { - next = tmp->next; - if (next->info.host < list->info.host) { - continue; - } - if (next->info.host == list->info.host) { - if (next->info.dev < list->info.dev) - continue; - } - break; - } - list->next = tmp->next; - tmp->next = list; - -done: - cc_cnt++; - wusbd_info("add_to_global_list: complete"); -} - -/* Remove a list from the global cc list */ -static void -remove_from_global_list(wusb_cc_list_t *list) -{ - - wusb_cc_list_t *tmp = NULL; - - wusbd_info("remove_from_global_list: host-id:%d, dev-id:%d, path:%s", - list->info.host, list->info.dev, list->info.type); - - /* first list */ - if (global_cclist == list) { - global_cclist = list->next; - goto found; - } - - for (tmp = global_cclist; tmp; tmp = tmp->next) { - if (tmp->next == list) { - tmp->next = list->next; - goto found; - } - } - - wusbd_warn("remove_from_global_list: cc not found "); - return; -found: - free(list); - cc_cnt--; - wusbd_info("remove_from_global_list: complete"); -} - -/* - * It is useful make a wrapper to work thru each entry in the global - * lists. it is used widely for to travers the whole list - */ -static void -global_list_iterate(cc_list_func func, void *data) -{ - wusb_cc_list_t *list = global_cclist; - while (list) { - if (func(list, (void*)data) < 0) - break; - list = list->next; - } -} - -/* Set all the device/host state to be disabled or disconnected */ -static void -clean_all_cc_list() -{ - wusbd_info("clean_all_cc_list: start"); - global_list_iterate(clean_cc_list, NULL); - wusbd_info("clean_all_cc_list: complete"); -} - -/* Copy the cc list to buffer */ -static void -copy_list_back(char *buf) -{ - global_list_iterate(copy_cc_list, &buf); -} - -/* work on each entry in the /dev/usb/whost */ -static void -all_hosts_iterate(host_func func) -{ - struct dirent *entry; - char filename[MAXPATHLEN]; - DIR *dirp = NULL; - - if ((dirp = opendir(WUSB_HOST_PATH)) == NULL) { - wusbd_warn("all_hosts_iterate: dir = %s, err = %s", - WUSB_HOST_PATH, strerror(errno)); - - return; - } - while ((entry = readdir(dirp)) != NULL) { - if (strstr(entry->d_name, WUSB_HOST_NAME)) { - - (void) snprintf(filename, MAXPATHLEN, "%s/%s", - WUSB_HOST_PATH, entry->d_name); - func(filename); - } - } - (void) closedir(dirp); -} - -/* Get the host file path in /dev/usb from a host id */ -static int -get_host_path(int hostid, char *path) -{ - struct dirent *entry; - char filename[MAXPATHLEN]; - DIR *dirp = NULL; - uint8_t mac[WUSB_DEV_MAC_LENGTH]; - int rval = WUSBA_FAILURE; - - wusbd_info("get_host_path :host = %d", hostid); - if ((dirp = opendir(WUSB_HOST_PATH)) == NULL) { - wusbd_warn("all_hosts_iterate: dir = %s, err = %s", - WUSB_HOST_PATH, strerror(errno)); - - return (rval); - } - while ((entry = readdir(dirp)) != NULL) { - if (strstr(entry->d_name, WUSB_HOST_NAME)) { - (void) snprintf(filename, MAXPATHLEN, "%s/%s", - WUSB_HOST_PATH, entry->d_name); - if (load_host_mac(filename, mac) < 0) { - wusbd_warn("get_host_path: host = %s failed", - filename); - - continue; - } - - if (hostid == find_host_id(mac)) { - (void) snprintf(path, MAXPATHLEN, "%s", - filename); - rval = WUSBA_SUCCESS; - - - break; - } - - - } - } - (void) closedir(dirp); - - return (rval); -} - -/* Check all the host device */ -static void -check_all_host() -{ - wusbd_info("check_all_host :start"); - all_hosts_iterate(check_host); - wusbd_info("check_all_host :finished"); -} - -/* Stop the host device */ -static void -stop_all_host() -{ - wusbd_info("stop_all_host :start"); - all_hosts_iterate((host_func)stop_host); - wusbd_info("stop_all_host :finished"); -} - -/* - * update the cc list information - * stat of the device and host, device nodename - */ -static void -update_all_cc_list() -{ - wusbd_info("update_all_cc_list :start"); - if (global_cclist) { - all_hosts_iterate(update_cc_list); - } else { - wusbd_info("update_all_cc_list :global_cclist = NULL"); - } - wusbd_info("update_all_cc_list :complete"); -} - -/* - * Get credential of the door_call client and check - * authorizations of caller's uid/euid - */ -static int -wusbd_check_auth(const char *auth_str) -{ - uid_t uid; - ucred_t *pcred = NULL; - if (door_ucred(&pcred) < 0) { - wusbd_warn("chk_auths: door_ucred: err = %s ", strerror(errno)); - - return (WUSBA_FAILURE); - } - - uid = ucred_geteuid(pcred); - - /* remember to do this */ - ucred_free(pcred); - - if (chk_auths(uid, auth_str) < 0) { - - return (WUSBA_FAILURE); - } - - return (WUSBA_SUCCESS); -} - -static int -load_host_mac(const char *filename, uint8_t *mac) -{ - int fd = -1; - int rval = WUSBA_FAILURE; - - wusbd_info("load_host_mac: host = %s\n", filename); - /* open host/dev file */ - if ((fd = open(filename, O_RDONLY)) == -1) { - wusbd_warn("load_host_mac: filename = %s , err = %s", filename, - strerror(errno)); - goto done; - } - - /* Get the mac address of the host */ - if (ioctl(fd, WUSB_HC_GET_MAC_ADDR, mac) == -1) { - wusbd_warn("load_host_mac: WUSB_HC_GET_MAC_ADDR: err = %s", - strerror(errno)); - (void) close(fd); - goto done; - } - - (void) close(fd); - - - rval = WUSBA_SUCCESS; -done: - wusbd_info("load_host_mac complete"); - - return (rval); -} - -/* - * create host cc - * 1. create the cc for host - * 2. save the cc to list & cc store file - */ -static int -create_host_cc(const char *filename) -{ - wusb_cc_info_t ccinfo; - uint8_t mac[WUSB_DEV_MAC_LENGTH]; - wusbd_info("create host cc for :%s", filename); - - if (load_host_mac(filename, mac) < 0) { - wusbd_warn("create_host_cc: host = %s, load mac failed", - filename); - - return (WUSBA_FAILURE); - } - - bzero(&ccinfo, sizeof (wusb_cc_info_t)); - - /* assign CHID */ - if (generate_wusb_CHID(&(ccinfo.cc), mac) < 0) { - - wusbd_warn("create_host_cc: host = %s, reate chid failed", - filename); - - return (WUSBA_FAILURE); - } - - print_array("New CC for host:", ccinfo.cc.CHID, 48); - - (void) memcpy(ccinfo.mac, mac, WUSB_DEV_MAC_LENGTH); - - /* Todo: only support hwa */ - (void) snprintf(ccinfo.type, WUSB_TYPE_LEN, "hwa"); - - /* don't allocate dev id here , for host, dev id set to 0 */ - if ((ccinfo.host = assign_host_id()) == 0) { - wusbd_warn("create_host_cc: assign_host_id = 0"); - - return (WUSBA_FAILURE); - } - ccinfo.dev = 0; - - /* save cc infor to host and cc file */ - if (save_cc(&ccinfo) < 0) { - wusbd_warn("create_host_cc: save_cc failed"); - - return (WUSBA_FAILURE); - } - - return (WUSBA_SUCCESS); - -} - -/* - * Add CCs to hosts upon startup - * OR add CCs to the host which is newly hotplugged in - */ -static void -check_host(const char *host) -{ - int hostid = 0; - - uint8_t mac[WUSB_DEV_MAC_LENGTH]; - - wusbd_info("check_host: host = %s", host); - if (load_host_mac(host, mac) < 0) { - wusbd_warn("check_host: host = %s load mac fail", host); - - return; - } - if ((hostid = find_host_id(mac)) != 0) { - wusbd_info("check_host: host = %s host-id = %d found", - host, hostid); - (void) add_all_cc_to_host(host, hostid); - /* start the host */ - (void) start_host(host); - - } else { - wusbd_info("check_host: newhost = %s found", host); - if (WUSBA_SUCCESS == create_host_cc(host)) { - /* check host again */ - (void) check_host(host); - } - } -} - -/* - * Remove one cc from host - * Args: - * hostid - hostid for the cc - * devid - devid for the cc - */ -static int -remove_cc_from_host(uint8_t hostid, uint16_t devid) -{ - int fd = -1; - wusb_cc_list_t *list = devids[hostid][0]; - char host_path[MAXPATHLEN]; - - if (get_host_path(hostid, host_path) < 0) { - wusbd_warn("remove_cc_from_host:hostid = %d not attached", - hostid); - - return (WUSBA_FAILURE); - } - - if ((fd = open(host_path, O_RDWR)) == -1) { - wusbd_warn("remove_cc_from_host: host = %s err = %s", - host_path, strerror(errno)); - - return (WUSBA_FAILURE); - } - - list = devids[hostid][devid]; - if (ioctl(fd, WUSB_HC_REM_CC, &(list->info.cc)) != 0) { - wusbd_warn("remove_cc_from_host: WUSB_HC_REM_CC err = %s", - strerror(errno)); - (void) close(fd); - - return (WUSBA_FAILURE); - } - (void) close(fd); - - return (WUSBA_SUCCESS); -} - -/* Stop/disable a host device */ -static int -stop_host(const char *host) -{ - int fd = -1; - int hstate = -1; - wusbd_info("stop_host: host = %s", host); - if ((fd = open(host, O_RDONLY)) == -1) { - wusbd_warn("stop_host:host = %s err = %s", host, - strerror(errno)); - - return (WUSBA_FAILURE); - } - /* - * We'll only send the cmd to stop host while host has already - * been startd. start/stop host takes time becasue host controller - * need to reset hardware or may cause issue while it it is stopping. - * So just do it at the right time. - */ - if (ioctl(fd, WUSB_HC_GET_HSTATE, &hstate) < 0) { - wusbd_warn("stop_host: WUSB_HC_GET_HSTATE: err = %s", - strerror(errno)); - goto fail; - } - - if (hstate == WUSB_HC_STARTED) { - if (ioctl(fd, WUSB_HC_STOP, WUSB_HC_FINAL_STOP) != 0) { - wusbd_warn("stop_host: WUSB_HC_STOP: err = %s", - strerror(errno)); - goto fail; - } - } - (void) close(fd); - - return (WUSBA_SUCCESS); -fail: - (void) close(fd); - - return (WUSBA_FAILURE); -} - -/* start/enable a host device */ -static int -start_host(const char *host) -{ - int fd = -1; - int hstate = -1; - wusbd_warn("start_host : host = %s", host); - if ((fd = open(host, O_RDONLY)) == -1) { - wusbd_warn("start_host: host = %s err = %s", host, - strerror(errno)); - - return (WUSBA_FAILURE); - } - /* - * Check if the host is already start. if the host has been started. - * it is not proper to send the start command to the host controller, - * because it may cause some issue for host contoller reset the - * hardware - */ - if (ioctl(fd, WUSB_HC_GET_HSTATE, &hstate) < 0) { - wusbd_warn("start_host: ioctl = WUSB_HC_GET_HSTATE err = %s", - strerror(errno)); - goto fail; - } - - if (hstate != WUSB_HC_STARTED) { - if (ioctl(fd, WUSB_HC_START, WUSB_HC_INITIAL_START) == -1) { - wusbd_warn("start_host: WUSB_HC_START: err = %s", - strerror(errno)); - goto fail; - } - } - (void) close(fd); - wusbd_info("start_host: complete"); - - return (WUSBA_SUCCESS); -fail: - (void) close(fd); - - return (WUSBA_FAILURE); -} - -/* Check the args of a dev ctrl door call request */ -static uint16_t -check_dev_ctrl(wusb_dev_ctrl_t *dev_ctrl) -{ - if ((dev_ctrl->host == 0) || (dev_ctrl->host >= HOST_MAX)) { - wusbd_warn("check_dev_ctrl: host-id = %02d", dev_ctrl->host); - - return (WUSBADM_INVAL_HOSTID); - } - if (!devids[dev_ctrl->host][0]) { - wusbd_warn("check_dev_ctrl: host-id = %02d cc = NULL", - dev_ctrl->host); - - return (WUSBADM_NO_HOST); - } - if (dev_ctrl->dev >= DEV_MAX) { - wusbd_warn("check_dev_ctrl: dev-id = %03d, max: %d", - dev_ctrl->dev, DEV_MAX); - - return (WUSBADM_INVAL_DEVID); - - } - if (!devids[dev_ctrl->host][dev_ctrl->dev]) { - wusbd_warn("check_dev_ctl: dev-id = %02d.%03d, cc = NULL", - dev_ctrl->host, dev_ctrl->dev); - - return (WUSBADM_NO_DEVICE); - } - - return (WUSBADM_OK); -} - -/* Check the args of a host ctrl door call request */ -static uint16_t -check_host_ctrl(wusb_dev_ctrl_t *dev_ctrl) -{ - if ((dev_ctrl->host == 0) || (dev_ctrl->host >= HOST_MAX)) { - wusbd_warn("check_host_ctrl: host-id = %02d", dev_ctrl->host); - - return (WUSBADM_INVAL_HOSTID); - } - if (!devids[dev_ctrl->host][0]) { - wusbd_warn("check_host_ctrl: host-id = %02d, cc = NULL", - dev_ctrl->host); - - return (WUSBADM_NO_HOST); - } - if (dev_ctrl->dev != 0) { - wusbd_warn("check_host_ctrl: dev-id = %03d no zero", - dev_ctrl->dev); - - return (WUSBADM_INVAL_DEVID); - } - - return (WUSBADM_OK); -} - -/* Remove one dev from the cc list */ -static int -remove_one_dev(uint8_t hostid, uint16_t devid) -{ - wusb_cc_list_t *list = NULL; - if (remove_cc_from_host(hostid, devid) < 0) { - wusbd_warn("remove_one_dev: hostid = %d, devid = %d" - "remove cc from host failed", hostid, devid); - } - list = devids[hostid][devid]; - remove_from_global_list(list); - - free_dev_id(hostid, devid); - - return (WUSBA_SUCCESS); - -} - -/* Remove all dev from the cc list */ -static int -remove_all_dev(uint8_t hostid) -{ - int i = 0; - wusbd_warn("remove_all_dev enter, hostid = %d", hostid); - if (remove_all_cc_from_host(hostid) < 0) { - wusbd_warn("remove_all_dev: hostid = %d. remove all cc failed", - hostid); - } - for (i = 1; i < DEV_MAX; i++) { - wusb_cc_list_t *list = devids[hostid][i]; - if (list) { - remove_from_global_list(list); - free_dev_id(hostid, i); - } - } - wusbd_warn("remove_all_dev complete"); - - return (WUSBA_SUCCESS); -} - -/* register device add/remove event to update the cc list */ -static int -init_sys_evnt() -{ - sysevent_handle_t *shp; - const char *subclass_list[] = { - ESC_DEVFS_DEVI_ADD, - 0 - }; - if ((shp = sysevent_bind_handle(event_handler)) == NULL) { - wusbd_warn("init_sys_evnt: sysevent bind handle: err = %s", - strerror(errno)); - goto fail; - } - if (sysevent_subscribe_event(shp, EC_DEVFS, subclass_list, 1) != 0) { - wusbd_warn("init_sys_evnt: sysevent subscribe: err = %s", - strerror(errno)); - sysevent_unbind_handle(shp); - goto fail; - } - - return (WUSBA_SUCCESS); -fail: - - return (WUSBA_FAILURE); -} - -/* - * Only one daemon is running in the system - * Create pid file to save the pid of the daemon - * process, the pid file is also used by svcadm to - * stop the daemon - */ -static int -init_daemon_pid() -{ - int fd; - char pid[20]; - - if ((fd = open(PID_FILE, O_RDWR|O_CREAT|O_EXCL, S_IRUSR | S_IWUSR)) - == -1) { - wusbd_warn("dameon is already running! "); - - return (WUSBA_FAILURE); - } - - /* save pid to the file */ - (void) snprintf(pid, 19, "%d", getpid()); - - if (write(fd, pid, strlen(pid)) != strlen(pid)) { - wusbd_warn("write pid file failed! "); - (void) close(fd); - - return (WUSBA_FAILURE); - - } - (void) close(fd); - - return (WUSBA_SUCCESS); - -} - -static void -exit_clean(int ret) -{ - wusbd_warn("Remove door file, pid file"); - (void) fdetach(DOOR_FILE); - (void) unlink(DOOR_FILE); - (void) unlink(PID_FILE); - - (void) pthread_mutex_destroy(&mutex_cclock); - - closelog(); - - exit(ret); -} - -/* - * Refresh daemon. svcadm restart will send a SIGHUP to the daemon - * destroy the cc list and reload it from cc now. Update the status - * of each cc list by checking all the hosts in the system. - */ -/* ARGSUSED */ -static void -refresh(int signo) -{ - wusbd_info("refresh: daemon is restarting.."); - - (void) pthread_mutex_lock(&mutex_cclock); - - destroy_global_cc_list(); - (void) init_global_cc_list(); - check_all_host(); - - (void) pthread_mutex_unlock(&mutex_cclock); - - wusbd_info("refresh: daemon is ok now"); -} - -/* update host CC when a wireless host is plugged */ -static void -event_handler(sysevent_t *ev) -{ - nvlist_t *attr_list = NULL; - char *path = NULL; - - if (sysevent_get_attr_list(ev, &attr_list) != 0) { - wusbd_warn("event_handler: can not get attr list"); - - return; - } - - (void) nvlist_lookup_string(attr_list, DEVFS_PATHNAME, &path); - - wusbd_info("event_handler: device path %s", path); - - - /* check if the device is host device and update cc list */ - if (path && strstr(path, WUSB_HWA_HOST_NODE)) { - char filename[MAXPATHLEN]; - (void) snprintf(filename, MAXPATHLEN, "/devices%s:hwahc", path); - - (void) pthread_mutex_lock(&mutex_cclock); - check_host(filename); - (void) pthread_mutex_unlock(&mutex_cclock); - } - - nvlist_free(attr_list); -} - - -/* For debug only */ -void -print_prv() -{ -#ifdef DEBUG - priv_set_t *tt = priv_allocset(); - if (getppriv(PRIV_PERMITTED, tt) == 0) { - wusbd_info("PRIV_PERMITTED:\n"); - wusbd_info("\t%s\n", - priv_set_to_str(tt, ',', PRIV_STR_SHORT)); - } - if (getppriv(PRIV_EFFECTIVE, tt) == 0) { - wusbd_info("PRIV_EFFECTIVE:\n"); - wusbd_info("\t%s\n", - priv_set_to_str(tt, ',', PRIV_STR_SHORT)); - } - if (getppriv(PRIV_INHERITABLE, tt) == 0) { - wusbd_info("PRIV_INHERITABLE:\n"); - wusbd_info("\t%s\n", - priv_set_to_str(tt, ',', PRIV_STR_SHORT)); - } - if (getppriv(PRIV_LIMIT, tt) == 0) { - wusbd_info("PRIV_LIMIT:\n"); - wusbd_info("\t%s\n", - priv_set_to_str(tt, ',', PRIV_STR_SHORT)); - } - priv_freeset(tt); -#endif -} - -/* wusb daemon init */ -static int -wusbd_daemonize_init() -{ - int status, pfds[2]; - sigset_t set, oset; - pid_t pid; - int rc; - - /* - * Remove all the privs not needed for the daemon. - * PRIV_SYS_MOUNT: requred by starting door serv. - * PRIV_FILE_DAC_WRITE: requred by attach door file. - * PRIV_SYS_CONFIG, required by register sys event. - * PRIV_SYS_DEVICES, required by driver ioctl. - */ - rc = __init_daemon_priv(PU_RESETGROUPS | PU_CLEARLIMITSET, - 0, 0, - PRIV_SYS_MOUNT, - PRIV_FILE_DAC_WRITE, - PRIV_SYS_CONFIG, - PRIV_SYS_DEVICES, - NULL); - - if (rc != 0) { - wusbd_warn("insufficient privileges"); - exit(FATAL_ERROR); - } - - /* - * Block all signals prior to the fork and leave them blocked in the - * parent so we don't get in a situation where the parent gets SIGINT - * and returns non-zero exit status and the child is actually running. - * In the child, restore the signal mask once we've done our setsid(). - */ - (void) sigfillset(&set); - (void) sigdelset(&set, SIGABRT); - (void) sigprocmask(SIG_BLOCK, &set, &oset); - - if (pipe(pfds) == -1) { - wusbd_warn("unable to create pipe"); - closelog(); - exit(FATAL_ERROR); - } - - closelog(); - - - if ((pid = fork()) == -1) { - openlog("wusbd", LOG_PID | LOG_NDELAY, LOG_DAEMON); - wusbd_warn("unable to fork"); - closelog(); - exit(FATAL_ERROR); - } - - /* - * If we're the parent process, wait for either the child to send us - * the appropriate exit status over the pipe or for the read to fail - * (presumably with 0 for EOF if our child terminated abnormally). - * If the read fails, exit with either the child's exit status if it - * exited or with SMF_EXIT_ERR_FATAL if it died from a fatal signal. - */ - if (pid != 0) { - (void) close(pfds[1]); - - if (read(pfds[0], &status, sizeof (status)) == sizeof (status)) - _exit(status); - - if (waitpid(pid, &status, 0) == pid && WIFEXITED(status)) - _exit(WEXITSTATUS(status)); - - _exit(FATAL_ERROR); - } - openlog("wusbd", LOG_PID | LOG_NDELAY, LOG_DAEMON); - (void) setsid(); - (void) sigprocmask(SIG_SETMASK, &oset, NULL); - (void) chdir("/"); - (void) umask(022); - (void) close(pfds[0]); - - return (pfds[1]); -} - -/* wusb daemon fini */ -static void -wusbd_daemonize_fini(int fd, int exit_status) -{ - /* - * Now that we're running, if a pipe fd was specified, write an exit - * status to it to indicate that our parent process can safely detach. - * Then proceed to loading the remaining non-built-in modules. - */ - if (fd >= 0) { - (void) write(fd, &exit_status, sizeof (exit_status)); - } - - (void) close(fd); - if ((fd = open("/dev/null", O_RDWR)) >= 0) { - (void) fcntl(fd, F_DUP2FD, STDIN_FILENO); - (void) fcntl(fd, F_DUP2FD, STDOUT_FILENO); -#if 0 - /* Leave the stderr for smf log */ - (void) fcntl(fd, F_DUP2FD, STDERR_FILENO); -#endif - (void) close(fd); - } - /* Remove all the privs not needed. leave SYS_DEVICE only */ - __fini_daemon_priv(PRIV_PROC_FORK, PRIV_PROC_EXEC, PRIV_PROC_SESSION, - PRIV_FILE_LINK_ANY, - PRIV_PROC_INFO, - PRIV_FILE_DAC_WRITE, - PRIV_SYS_MOUNT, - PRIV_SYS_CONFIG, - (char *)NULL); - - - print_prv(); -} -/* Each door call handler should get the lock */ -static void -wusbd_daemon_enter() -{ - wusbd_info("wusbd_daemon_enter: enter"); - (void) pthread_mutex_lock(&mutex_cclock); -} -/* Each door call handler should release the lock */ -static void -wusbd_daemon_leave(char *buf, int len) -{ - wusbd_info("wusbd_daemon_leave"); - (void) pthread_mutex_unlock(&mutex_cclock); - (void) door_return(buf, len, NULL, 0); -} diff --git a/usr/src/cmd/wusbadm/wusbd.h b/usr/src/cmd/wusbadm/wusbd.h deleted file mode 100644 index c215d2b772..0000000000 --- a/usr/src/cmd/wusbadm/wusbd.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * CDDL HEADER START - * - * The contents of this file are subject to the terms of the - * Common Development and Distribution License (the "License"). - * You may not use this file except in compliance with the License. - * - * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE - * or http://www.opensolaris.org/os/licensing. - * See the License for the specific language governing permissions - * and limitations under the License. - * - * When distributing Covered Code, include this CDDL HEADER in each - * file and include the License file at usr/src/OPENSOLARIS.LICENSE. - * If applicable, add the following below this CDDL HEADER, with the - * fields enclosed by brackets "[]" replaced with your own identifying - * information: Portions Copyright [yyyy] [name of copyright owner] - * - * CDDL HEADER END - */ -/* - * Copyright 2009 Sun Microsystems, Inc. All rights reserved. - * Use is subject to license terms. - */ - -#ifndef _WUSBD_H -#define _WUSBD_H - - -#ifdef __cplusplus -extern "C" { -#endif - -#define WUSB_HOST_PATH "/dev/usb" -#define WUSB_HOST_NAME "whost" -#define WUSB_HWA_HOST_NODE "hwa-host" - -#define DOOR_FILE "/var/run/wusbd/wusb_door" -#define PID_FILE "/var/run/wusbd/wusb.pid" -#define WUSB_CC "/etc/usb/wusbcc" - -/* door server commands */ -enum { - WUSB_DCMD_LIST_DATA = 0, - WUSB_DCMD_ASSOCIATE, - WUSB_DCMD_REMOVE_DEV, - WUSB_DCMD_REMOVE_HOST, - WUSB_DCMD_ENABLE_HOST, - WUSB_DCMD_DISABLE_HOST -}; - -enum { - WUSBADM_OK = 0, - WUSBADM_AUTH_FAILURE, /* authorization check failure */ - WUSBADM_NO_HOST, /* host id does not exist */ - WUSBADM_NO_DEVICE, /* failure */ - WUSBADM_CCSTORE_ACC, /* fail to access CC store */ - WUSBADM_NO_SUPPORT, /* failure */ - WUSBADM_INVAL_HOSTID, /* host-id not exist */ - WUSBADM_INVAL_DEVID, /* dev-id not exist */ - WUSBADM_HOST_NOT_ATTACH, /* the device file not exist */ - WUSBADM_FAILURE /* other kind of failure */ -}; - -#define WUSB_AUTH_READ "solaris.admin.wusb.read" -#define WUSB_AUTH_MODIFY "solaris.admin.wusb.modify" -#define WUSB_AUTH_HOST "solaris.admin.wusb.host" - -#define WUSB_BUF_LEN 1024 - - -/* return values */ -#define WUSBA_SUCCESS 0 -#define WUSBA_FAILURE -1 - -typedef struct wusbd_door_call { - uint16_t cmdss; /* cmd/status */ - char buf[WUSB_BUF_LEN]; /* args/return */ -} wusb_door_call_t; - -/* association type */ -#define ASSO_TYPE_NUMERIC 0x01 -#define ASSO_TYPE_CABLE 0x02 - -/* assocation data */ -typedef struct wusb_asso_ctrl { - uint8_t host; /* host id */ - uint8_t type; /* c/n */ - uint8_t onetime; /* onetime/always */ - char path[MAXPATHLEN]; /* device path */ -} wusb_asso_ctrl_t; - -/* host/dev contrl data */ -typedef struct wusb_dev_ctrl { - uint8_t host; /* host id */ - uint16_t dev; /* device id */ -} wusb_dev_ctrl_t; - -void daemonize(); - -#ifdef __cplusplus -} -#endif - -#endif /* _WUSBD_H */ |