diff options
Diffstat (limited to 'usr/src/common/acpica/executer/exsystem.c')
| -rw-r--r-- | usr/src/common/acpica/executer/exsystem.c | 349 |
1 files changed, 349 insertions, 0 deletions
diff --git a/usr/src/common/acpica/executer/exsystem.c b/usr/src/common/acpica/executer/exsystem.c new file mode 100644 index 0000000000..a215e8012d --- /dev/null +++ b/usr/src/common/acpica/executer/exsystem.c @@ -0,0 +1,349 @@ +/****************************************************************************** + * + * Module Name: exsystem - Interface to OS services + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2016, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include "acpi.h" +#include "accommon.h" +#include "acinterp.h" + +#define _COMPONENT ACPI_EXECUTER + ACPI_MODULE_NAME ("exsystem") + + +/******************************************************************************* + * + * FUNCTION: AcpiExSystemWaitSemaphore + * + * PARAMETERS: Semaphore - Semaphore to wait on + * Timeout - Max time to wait + * + * RETURN: Status + * + * DESCRIPTION: Implements a semaphore wait with a check to see if the + * semaphore is available immediately. If it is not, the + * interpreter is released before waiting. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiExSystemWaitSemaphore ( + ACPI_SEMAPHORE Semaphore, + UINT16 Timeout) +{ + ACPI_STATUS Status; + + + ACPI_FUNCTION_TRACE (ExSystemWaitSemaphore); + + + Status = AcpiOsWaitSemaphore (Semaphore, 1, ACPI_DO_NOT_WAIT); + if (ACPI_SUCCESS (Status)) + { + return_ACPI_STATUS (Status); + } + + if (Status == AE_TIME) + { + /* We must wait, so unlock the interpreter */ + + AcpiExExitInterpreter (); + Status = AcpiOsWaitSemaphore (Semaphore, 1, Timeout); + + ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, + "*** Thread awake after blocking, %s\n", + AcpiFormatException (Status))); + + /* Reacquire the interpreter */ + + AcpiExEnterInterpreter (); + } + + return_ACPI_STATUS (Status); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiExSystemWaitMutex + * + * PARAMETERS: Mutex - Mutex to wait on + * Timeout - Max time to wait + * + * RETURN: Status + * + * DESCRIPTION: Implements a mutex wait with a check to see if the + * mutex is available immediately. If it is not, the + * interpreter is released before waiting. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiExSystemWaitMutex ( + ACPI_MUTEX Mutex, + UINT16 Timeout) +{ + ACPI_STATUS Status; + + + ACPI_FUNCTION_TRACE (ExSystemWaitMutex); + + + Status = AcpiOsAcquireMutex (Mutex, ACPI_DO_NOT_WAIT); + if (ACPI_SUCCESS (Status)) + { + return_ACPI_STATUS (Status); + } + + if (Status == AE_TIME) + { + /* We must wait, so unlock the interpreter */ + + AcpiExExitInterpreter (); + Status = AcpiOsAcquireMutex (Mutex, Timeout); + + ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, + "*** Thread awake after blocking, %s\n", + AcpiFormatException (Status))); + + /* Reacquire the interpreter */ + + AcpiExEnterInterpreter (); + } + + return_ACPI_STATUS (Status); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiExSystemDoStall + * + * PARAMETERS: HowLong - The amount of time to stall, + * in microseconds + * + * RETURN: Status + * + * DESCRIPTION: Suspend running thread for specified amount of time. + * Note: ACPI specification requires that Stall() does not + * relinquish the processor, and delays longer than 100 usec + * should use Sleep() instead. We allow stalls up to 255 usec + * for compatibility with other interpreters and existing BIOSs. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiExSystemDoStall ( + UINT32 HowLong) +{ + ACPI_STATUS Status = AE_OK; + + + ACPI_FUNCTION_ENTRY (); + + + if (HowLong > 255) /* 255 microseconds */ + { + /* + * Longer than 255 usec, this is an error + * + * (ACPI specifies 100 usec as max, but this gives some slack in + * order to support existing BIOSs) + */ + ACPI_ERROR ((AE_INFO, + "Time parameter is too large (%u)", HowLong)); + Status = AE_AML_OPERAND_VALUE; + } + else + { + AcpiOsStall (HowLong); + } + + return (Status); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiExSystemDoSleep + * + * PARAMETERS: HowLong - The amount of time to sleep, + * in milliseconds + * + * RETURN: None + * + * DESCRIPTION: Sleep the running thread for specified amount of time. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiExSystemDoSleep ( + UINT64 HowLong) +{ + ACPI_FUNCTION_ENTRY (); + + + /* Since this thread will sleep, we must release the interpreter */ + + AcpiExExitInterpreter (); + + /* + * For compatibility with other ACPI implementations and to prevent + * accidental deep sleeps, limit the sleep time to something reasonable. + */ + if (HowLong > ACPI_MAX_SLEEP) + { + HowLong = ACPI_MAX_SLEEP; + } + + AcpiOsSleep (HowLong); + + /* And now we must get the interpreter again */ + + AcpiExEnterInterpreter (); + return (AE_OK); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiExSystemSignalEvent + * + * PARAMETERS: ObjDesc - The object descriptor for this op + * + * RETURN: Status + * + * DESCRIPTION: Provides an access point to perform synchronization operations + * within the AML. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiExSystemSignalEvent ( + ACPI_OPERAND_OBJECT *ObjDesc) +{ + ACPI_STATUS Status = AE_OK; + + + ACPI_FUNCTION_TRACE (ExSystemSignalEvent); + + + if (ObjDesc) + { + Status = AcpiOsSignalSemaphore (ObjDesc->Event.OsSemaphore, 1); + } + + return_ACPI_STATUS (Status); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiExSystemWaitEvent + * + * PARAMETERS: TimeDesc - The 'time to delay' object descriptor + * ObjDesc - The object descriptor for this op + * + * RETURN: Status + * + * DESCRIPTION: Provides an access point to perform synchronization operations + * within the AML. This operation is a request to wait for an + * event. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiExSystemWaitEvent ( + ACPI_OPERAND_OBJECT *TimeDesc, + ACPI_OPERAND_OBJECT *ObjDesc) +{ + ACPI_STATUS Status = AE_OK; + + + ACPI_FUNCTION_TRACE (ExSystemWaitEvent); + + + if (ObjDesc) + { + Status = AcpiExSystemWaitSemaphore (ObjDesc->Event.OsSemaphore, + (UINT16) TimeDesc->Integer.Value); + } + + return_ACPI_STATUS (Status); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiExSystemResetEvent + * + * PARAMETERS: ObjDesc - The object descriptor for this op + * + * RETURN: Status + * + * DESCRIPTION: Reset an event to a known state. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiExSystemResetEvent ( + ACPI_OPERAND_OBJECT *ObjDesc) +{ + ACPI_STATUS Status = AE_OK; + ACPI_SEMAPHORE TempSemaphore; + + + ACPI_FUNCTION_ENTRY (); + + + /* + * We are going to simply delete the existing semaphore and + * create a new one! + */ + Status = AcpiOsCreateSemaphore (ACPI_NO_UNIT_LIMIT, 0, &TempSemaphore); + if (ACPI_SUCCESS (Status)) + { + (void) AcpiOsDeleteSemaphore (ObjDesc->Event.OsSemaphore); + ObjDesc->Event.OsSemaphore = TempSemaphore; + } + + return (Status); +} |