diff options
Diffstat (limited to 'usr/src/lib/libcurses/screen/caps')
| -rw-r--r-- | usr/src/lib/libcurses/screen/caps | 557 |
1 files changed, 557 insertions, 0 deletions
diff --git a/usr/src/lib/libcurses/screen/caps b/usr/src/lib/libcurses/screen/caps new file mode 100644 index 0000000000..9e7bd5ce99 --- /dev/null +++ b/usr/src/lib/libcurses/screen/caps @@ -0,0 +1,557 @@ +# +# Copyright 2005 Sun Microsystems, Inc. All rights reserved. +# Use is subject to license terms. +# +# CDDL HEADER START +# +# The contents of this file are subject to the terms of the +# Common Development and Distribution License, Version 1.0 only +# (the "License"). You may not use this file except in compliance +# with the License. +# +# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE +# or http://www.opensolaris.org/os/licensing. +# See the License for the specific language governing permissions +# and limitations under the License. +# +# When distributing Covered Code, include this CDDL HEADER in each +# file and include the License file at usr/src/OPENSOLARIS.LICENSE. +# If applicable, add the following below this CDDL HEADER, with the +# fields enclosed by brackets "[]" replaced with your own identifying +# information: Portions Copyright [yyyy] [name of copyright owner] +# +# CDDL HEADER END +# + +# Copyright (c) 1988 AT&T +# All Rights Reserved + +# +# University Copyright- Copyright (c) 1982, 1986, 1988 +# The Regents of the University of California +# All Rights Reserved +# +# University Acknowledgment- Portions of this document are derived from +# software developed by the University of California, Berkeley, and its +# contributors. +# + +#ident "%Z%%M% %I% %E% SMI" + +# Be sure to add new capabilties at the END of the appropriate section! +--- begin bool +auto_left_margin, "bw" "bw" cub1 wraps from column 0 to last column +auto_right_margin, "am" "am" Terminal has automatic margins +no_esc_ctlc, "xsb" "xb" Beehive (f1=escape, f2=ctrl C) +ceol_standout_glitch, "xhp" "xs" Standout not erased by overwriting (hp) +eat_newline_glitch, "xenl" "xn" newline ignored after 80 cols (Concept) +erase_overstrike, "eo" "eo" Can erase overstrikes with a blank +generic_type, "gn" "gn" Generic line type (e.g. dialup, switch). +hard_copy, "hc" "hc" Hardcopy terminal +has_meta_key, "km" "km" Has a meta key (shift, sets parity bit) +has_status_line, "hs" "hs" Has extra "status line" +insert_null_glitch, "in" "in" Insert mode distinguishes nulls +memory_above, "da" "da" Display may be retained above the screen +memory_below, "db" "db" Display may be retained below the screen +move_insert_mode, "mir" "mi" Safe to move while in insert mode +move_standout_mode, "msgr" "ms" Safe to move in standout modes +over_strike, "os" "os" Terminal overstrikes +status_line_esc_ok, "eslok" "es" Escape can be used on the status line +dest_tabs_magic_smso, "xt" "xt" Tabs destructive, magic so char (t1061) +tilde_glitch, "hz" "hz" Hazeltine; can't print ~'s +transparent_underline, "ul" "ul" underline character overstrikes +xon_xoff, "xon" "xo" Terminal uses xon/xoff handshaking +needs_xon_xoff, "nxon" "nx" Padding won't work, xon/xoff required +prtr_silent, "mc5i" "5i" Printer won't echo on screen. +hard_cursor, "chts" "HC" Cursor is hard to see. +non_rev_rmcup, "nrrmc" "NR" Smcup does not reverse rmcup. +no_pad_char, "npc" "NP" Pad character doesn't exist. +non_dest_scroll_region, "ndscr" "ND" Scrolling region is non-destructive. +can_change, "ccc" "cc" Can re-define existing color +back_color_erase, "bce" "ut" Erases screen with current background +hue_lightness_saturation, "hls" "hl" HLS color notation is used (Tek) +# +# printer specific +# +col_addr_glitch, "xhpa" "YA" Only positive motion for hpa/mhpa caps +cr_cancels_micro_mode, "crxm" "YB" Using cr turns off micro mode +has_print_wheel, "daisy" "YC" Printer needs operator to change character set +row_addr_glitch, "xvpa" "YD" Only positive motion for vpa/mvpa caps +semi_auto_right_margin, "sam" "YE" Printing in last column causes cr +cpi_changes_res, "cpix" "YF" Changing char. pitch changes resolution +lpi_changes_res, "lpix" "YG" Changing line pitch changes resolution +# Add new Booleans before this line. +--- end bool + +--- begin num +columns, "cols" "co" Number of columns in a line +init_tabs, "it" "it" Tabs initially every # spaces. +lines, "lines" "li" Number of lines on screen or page +lines_of_memory, "lm" "lm" Lines of memory if > lines. 0 => varies +magic_cookie_glitch, "xmc" "sg" Number blank chars left by smso or rmso +padding_baud_rate, "pb" "pb" Lowest baud rate where padding needed +virtual_terminal, "vt" "vt" Virtual terminal number (CB/Unix) +width_status_line, "wsl" "ws" # columns in status line +num_labels, "nlab" "Nl" # of labels on screen (start at 1) +label_height, "lh" "lh" # rows in each label +label_width, "lw" "lw" # cols in each label +max_attributes, "ma" "ma" max combined video attributes terminal can display +# +# +# +maximum_windows, "wnum" "MW" Maximum number of defineable windows +max_colors, "colors" "Co" max # of color on the screen +max_pairs, "pairs" "pa" max # of color pairs on the screen +no_color_video, "ncv" "NC" Video attributes that cannot be used with colors +# +# printer specific +# +buffer_capacity, "bufsz" "Ya" Number of bytes buffered before printing +dot_vert_spacing, "spinv" "Yb" Spacing of pins vertically in pins per inch +dot_horz_spacing, "spinh" "Yc" Spacing of dots horizontally in dots per inch +max_micro_address, "maddr" "Yd" Maximum value in micro_..._address +max_micro_jump, "mjump" "Ye" Maximum value in parm_..._micro +micro_char_size, "mcs" "Yf" Character step size when in micro mode +micro_line_size, "mls" "Yg" Line step size when in micro mode +number_of_pins, "npins" "Yh" Number of pins in print-head +output_res_char, "orc" "Yi" Horizontal resolution in units per character +output_res_line, "orl" "Yj" Vertical resolution in units per line +output_res_horz_inch, "orhi" "Yk" Horizontal resolution in units per inch +output_res_vert_inch, "orvi" "Yl" Vertical resolution in units per inch +print_rate, "cps" "Ym" Print rate in characters per second +wide_char_size, "widcs" "Yn" Character step size when in double wide mode +# +# mouse support +# +buttons, "btns" "BT" Number of buttons on the mouse +# +# Additional printer nums +# +bit_image_entwining, "bitwin" "Yo" Number of passes for each bit-image row +bit_image_type, "bitype" "Yp" Type of bit-image device +# Add new numbers before this line. +--- end num + +--- begin str +back_tab, "cbt" "bt" Back tab +bell, "bel" "bl" Audible signal (bell) +carriage_return, "cr" "cr" Carriage return (*) +change_scroll_region, "csr" "cs" change to lines #1 thru #2 (vt100) (G) +clear_all_tabs, "tbc" "ct" Clear all tab stops. +clear_screen, "clear" "cl" Clear screen (*) +clr_eol, "el" "ce" Clear to end of line +clr_eos, "ed" "cd" Clear to end of display (*) +column_address, "hpa" "ch" Set cursor column (G) +command_character, "cmdch" "CC" Term. settable cmd char in prototype +cursor_address, "cup" "cm" Cursor motion to row #1 col #2 (G) +cursor_down, "cud1" "do" Down one line +cursor_home, "home" "ho" Home cursor (if no cup) +cursor_invisible, "civis" "vi" Make cursor invisible +cursor_left, "cub1" "le" Move cursor left one space. +cursor_mem_address, "mrcup" "CM" Memory relative cursor addressing. +cursor_normal, "cnorm" "ve" Make cursor appear normal (undo vs/vi) +cursor_right, "cuf1" "nd" Non-destructive space (cursor right) +cursor_to_ll, "ll" "ll" Last line, first column (if no cup) +cursor_up, "cuu1" "up" Upline (cursor up) +cursor_visible, "cvvis" "vs" Make cursor very visible +delete_character, "dch1" "dc" Delete character (*) +delete_line, "dl1" "dl" Delete line (*) +dis_status_line, "dsl" "ds" Disable status line +down_half_line, "hd" "hd" Half-line down (forward 1/2 linefeed) +enter_alt_charset_mode, "smacs" "as" Start alternate character set +enter_blink_mode, "blink" "mb" Turn on blinking +enter_bold_mode, "bold" "md" Turn on bold (extra bright) mode +enter_ca_mode, "smcup" "ti" String to begin programs that use cup +enter_delete_mode, "smdc" "dm" Delete mode (enter) +enter_dim_mode, "dim" "mh" Turn on half-bright mode +enter_insert_mode, "smir" "im" Insert mode (enter); +enter_secure_mode, "invis" "mk" Turn on blank mode (chars invisible) +enter_protected_mode, "prot" "mp" Turn on protected mode +enter_reverse_mode, "rev" "mr" Turn on reverse video mode +enter_standout_mode, "smso" "so" Begin stand out mode +enter_underline_mode, "smul" "us" Start underscore mode +erase_chars, "ech" "ec" Erase #1 characters (G) +exit_alt_charset_mode, "rmacs" "ae" End alternate character set +exit_attribute_mode, "sgr0" "me" Turn off all attributes +exit_ca_mode, "rmcup" "te" String to end programs that use cup +exit_delete_mode, "rmdc" "ed" End delete mode +exit_insert_mode, "rmir" "ei" End insert mode; +exit_standout_mode, "rmso" "se" End stand out mode +exit_underline_mode, "rmul" "ue" End underscore mode +flash_screen, "flash" "vb" Visible bell (may not move cursor) +form_feed, "ff" "ff" Hardcopy terminal page eject (*) +from_status_line, "fsl" "fs" Return from status line +init_1string, "is1" "i1" Terminal initialization string +init_2string, "is2" "is" Terminal initialization string +init_3string, "is3" "i3" Terminal initialization string +init_file, "if" "if" Name of file containing is +insert_character, "ich1" "ic" Insert character +insert_line, "il1" "al" Add new blank line (*) +insert_padding, "ip" "ip" Insert pad after character inserted (*) +key_backspace, "kbs" "kb" KEY_BACKSPACE, 0407, Sent by backspace key +key_catab, "ktbc" "ka" KEY_CATAB, 0526, Sent by clear-all-tabs key. +key_clear, "kclr" "kC" KEY_CLEAR, 0515, Sent by clear screen or erase key. +key_ctab, "kctab" "kt" KEY_CTAB, 0525, Sent by clear-tab key +key_dc, "kdch1" "kD" KEY_DC, 0512, Sent by delete character key. +key_dl, "kdl1" "kL" KEY_DL, 0510, Sent by delete line key. +key_down, "kcud1" "kd" KEY_DOWN, 0402, Sent by terminal down arrow key +key_eic, "krmir" "kM" KEY_EIC, 0514, Sent by rmir or smir in ins mode. +key_eol, "kel" "kE" KEY_EOL, 0517, Sent by clear-to-end-of-line key. +key_eos, "ked" "kS" KEY_EOS, 0516, Sent by clear-to-end-of-screen. +key_f0, "kf0" "k0" KEY_F(0), 0410, function key f0. +key_f1, "kf1" "k1" KEY_F(1), 0411, function key f1. +key_f10, "kf10" "k;" KEY_F(10), 0422, function key f10. +key_f2, "kf2" "k2" KEY_F(2), 0412, function key f2. +key_f3, "kf3" "k3" KEY_F(3), 0413, function key f3. +key_f4, "kf4" "k4" KEY_F(4), 0414, function key f4. +key_f5, "kf5" "k5" KEY_F(5), 0415, function key f5. +key_f6, "kf6" "k6" KEY_F(6), 0416, function key f6. +key_f7, "kf7" "k7" KEY_F(7), 0417, function key f7. +key_f8, "kf8" "k8" KEY_F(8), 0420, function key f8. +key_f9, "kf9" "k9" KEY_F(9), 0421, function key f9. +key_home, "khome" "kh" KEY_HOME, 0406, Sent by home key. +key_ic, "kich1" "kI" KEY_IC, 0513, Sent by ins char/enter mode key. +key_il, "kil1" "kA" KEY_IL, 0511, Sent by insert line. +key_left, "kcub1" "kl" KEY_LEFT, 0404, Sent by terminal left arrow key +key_ll, "kll" "kH" KEY_LL, 0533, Sent by home-down key +key_npage, "knp" "kN" KEY_NPAGE, 0522, Sent by next-page key +key_ppage, "kpp" "kP" KEY_PPAGE, 0523, Sent by previous-page key +key_right, "kcuf1" "kr" KEY_RIGHT, 0405, Sent by terminal right arrow key +key_sf, "kind" "kF" KEY_SF, 0520, Sent by scroll-forward/down key +key_sr, "kri" "kR" KEY_SR, 0521, Sent by scroll-backward/up key +key_stab, "khts" "kT" KEY_STAB, 0524, Sent by set-tab key +key_up, "kcuu1" "ku" KEY_UP, 0403, Sent by terminal up arrow key +keypad_local, "rmkx" "ke" Out of "keypad transmit" mode +keypad_xmit, "smkx" "ks" Put terminal in "keypad transmit" mode +lab_f0, "lf0" "l0" Labels on function key f0 if not f0 +lab_f1, "lf1" "l1" Labels on function key f1 if not f1 +lab_f10, "lf10" "la" Labels on function key f10 if not f10 +lab_f2, "lf2" "l2" Labels on function key f2 if not f2 +lab_f3, "lf3" "l3" Labels on function key f3 if not f3 +lab_f4, "lf4" "l4" Labels on function key f4 if not f4 +lab_f5, "lf5" "l5" Labels on function key f5 if not f5 +lab_f6, "lf6" "l6" Labels on function key f6 if not f6 +lab_f7, "lf7" "l7" Labels on function key f7 if not f7 +lab_f8, "lf8" "l8" Labels on function key f8 if not f8 +lab_f9, "lf9" "l9" Labels on function key f9 if not f9 +meta_off, "rmm" "mo" Turn off "meta mode" +meta_on, "smm" "mm" Turn on "meta mode" (8th bit) +newline, "nel" "nw" Newline (behaves like cr followed by lf) +pad_char, "pad" "pc" Pad character (rather than null) +parm_dch, "dch" "DC" Delete #1 chars (G*) +parm_delete_line, "dl" "DL" Delete #1 lines (G*) +parm_down_cursor, "cud" "DO" Move cursor down #1 lines. (G*) +parm_ich, "ich" "IC" Insert #1 blank chars (G*) +parm_index, "indn" "SF" Scroll forward #1 lines. (G) +parm_insert_line, "il" "AL" Add #1 new blank lines (G*) +parm_left_cursor, "cub" "LE" Move cursor left #1 spaces (G) +parm_right_cursor, "cuf" "RI" Move cursor right #1 spaces. (G*) +parm_rindex, "rin" "SR" Scroll backward #1 lines. (G) +parm_up_cursor, "cuu" "UP" Move cursor up #1 lines. (G*) +pkey_key, "pfkey" "pk" Prog funct key #1 to type string #2 +pkey_local, "pfloc" "pl" Prog funct key #1 to execute string #2 +pkey_xmit, "pfx" "px" Prog funct key #1 to xmit string #2 +print_screen, "mc0" "ps" Print contents of the screen +prtr_off, "mc4" "pf" Turn off the printer +prtr_on, "mc5" "po" Turn on the printer +repeat_char, "rep" "rp" Repeat char #1 #2 times. (G*) +reset_1string, "rs1" "r1" Reset terminal completely to sane modes. +reset_2string, "rs2" "r2" Reset terminal completely to sane modes. +reset_3string, "rs3" "r3" Reset terminal completely to sane modes. +reset_file, "rf" "rf" Name of file containing reset string. +restore_cursor, "rc" "rc" Restore cursor to position of last sc. +row_address, "vpa" "cv" Like hpa but sets row. (G) +save_cursor, "sc" "sc" Save cursor position. +scroll_forward, "ind" "sf" Scroll text up +scroll_reverse, "ri" "sr" Scroll text down +set_attributes, "sgr" "sa" Define the video attributes (G9) +set_tab, "hts" "st" Set a tab in all rows, current column. +set_window, "wind" "wi" Current window is lines #1-#2 cols #3-#4 +tab, "ht" "ta" Tab to next 8 space hardware tab stop. +to_status_line, "tsl" "ts" Go to status line, col #1 +underline_char, "uc" "uc" Underscore one char and move past it +up_half_line, "hu" "hu" Half-line up (reverse 1/2 linefeed) +init_prog, "iprog" "iP" Path name of program for init. +key_a1, "ka1" "K1" KEY_A1, 0534, Upper left of keypad +key_a3, "ka3" "K3" KEY_A3, 0535, Upper right of keypad +key_b2, "kb2" "K2" KEY_B2, 0536, Center of keypad +key_c1, "kc1" "K4" KEY_C1, 0537, Lower left of keypad +key_c3, "kc3" "K5" KEY_C3, 0540, Lower right of keypad +prtr_non, "mc5p" "pO" Turn on the printer for #1 bytes. +char_padding, "rmp" "rP" Like ip but when in replace mode +acs_chars, "acsc" "ac" Graphic charset pairs aAbBcC - def=vt100 +plab_norm, "pln" "pn" Prog label #1 to show string #2 +key_btab, "kcbt" "kB" KEY_BTAB, 0541, Back tab key +enter_xon_mode, "smxon" "SX" Turn on xon/xoff handshaking +exit_xon_mode, "rmxon" "RX" Turn off xon/xoff handshaking +enter_am_mode, "smam" "SA" Turn on automatic margins +exit_am_mode, "rmam" "RA" Turn off automatic margins +xon_character, "xonc" "XN" X-on character +xoff_character, "xoffc" "XF" X-off character +ena_acs, "enacs" "eA" Enable alternate char set +label_on, "smln" "LO" Turn on soft labels +label_off, "rmln" "LF" Turn off soft labels +key_beg, "kbeg" "@1" KEY_BEG, 0542, beg(inning) key +key_cancel, "kcan" "@2" KEY_CANCEL, 0543, cancel key +key_close, "kclo" "@3" KEY_CLOSE, 0544, close key +key_command, "kcmd" "@4" KEY_COMMAND, 0545, cmd (command) key +key_copy, "kcpy" "@5" KEY_COPY, 0546, copy key +key_create, "kcrt" "@6" KEY_CREATE, 0547, create key +key_end, "kend" "@7" KEY_END, 0550, end key +key_enter, "kent" "@8" KEY_ENTER, 0527, Enter/send (unreliable) +key_exit, "kext" "@9" KEY_EXIT, 0551, exit key +key_find, "kfnd" "@0" KEY_FIND, 0552, find key +key_help, "khlp" "%1" KEY_HELP, 0553, help key +key_mark, "kmrk" "%2" KEY_MARK, 0554, mark key +key_message, "kmsg" "%3" KEY_MESSAGE, 0555, message key +key_move, "kmov" "%4" KEY_MOVE, 0556, move key +key_next, "knxt" "%5" KEY_NEXT, 0557, next object key +key_open, "kopn" "%6" KEY_OPEN, 0560, open key +key_options, "kopt" "%7" KEY_OPTIONS, 0561, options key +key_previous, "kprv" "%8" KEY_PREVIOUS, 0562, previous object key +key_print, "kprt" "%9" KEY_PRINT, 0532, print or copy +key_redo, "krdo" "%0" KEY_REDO, 0563, redo key +key_reference, "kref" "&1" KEY_REFERENCE, 0564, ref(erence) key +key_refresh, "krfr" "&2" KEY_REFRESH, 0565, refresh key +key_replace, "krpl" "&3" KEY_REPLACE, 0566, replace key +key_restart, "krst" "&4" KEY_RESTART, 0567, restart key +key_resume, "kres" "&5" KEY_RESUME, 0570, resume key +key_save, "ksav" "&6" KEY_SAVE, 0571, save key +key_suspend, "kspd" "&7" KEY_SUSPEND, 0627, suspend key +key_undo, "kund" "&8" KEY_UNDO, 0630, undo key +key_sbeg, "kBEG" "&9" KEY_SBEG, 0572, shifted beginning key +key_scancel, "kCAN" "&0" KEY_SCANCEL, 0573, shifted cancel key +key_scommand, "kCMD" "*1" KEY_SCOMMAND, 0574, shifted command key +key_scopy, "kCPY" "*2" KEY_SCOPY, 0575, shifted copy key +key_screate, "kCRT" "*3" KEY_SCREATE, 0576, shifted create key +key_sdc, "kDC" "*4" KEY_SDC, 0577, shifted delete char key +key_sdl, "kDL" "*5" KEY_SDL, 0600, shifted delete line key +key_select, "kslt" "*6" KEY_SELECT, 0601, select key +key_send, "kEND" "*7" KEY_SEND, 0602, shifted end key +key_seol, "kEOL" "*8" KEY_SEOL, 0603, shifted clear line key +key_sexit, "kEXT" "*9" KEY_SEXIT, 0604, shifted exit key +key_sfind, "kFND" "*0" KEY_SFIND, 0605, shifted find key +key_shelp, "kHLP" "#1" KEY_SHELP, 0606, shifted help key +key_shome, "kHOM" "#2" KEY_SHOME, 0607, shifted home key +key_sic, "kIC" "#3" KEY_SIC, 0610, shifted input key +key_sleft, "kLFT" "#4" KEY_SLEFT, 0611, shifted left arrow key +key_smessage, "kMSG" "%a" KEY_SMESSAGE, 0612, shifted message key +key_smove, "kMOV" "%b" KEY_SMOVE, 0613, shifted move key +key_snext, "kNXT" "%c" KEY_SNEXT, 0614, shifted next key +key_soptions, "kOPT" "%d" KEY_SOPTIONS, 0615, shifted options key +key_sprevious, "kPRV" "%e" KEY_SPREVIOUS, 0616, shifted prev key +key_sprint, "kPRT" "%f" KEY_SPRINT, 0617, shifted print key +key_sredo, "kRDO" "%g" KEY_SREDO, 0620, shifted redo key +key_sreplace, "kRPL" "%h" KEY_SREPLACE, 0621, shifted replace key +key_sright, "kRIT" "%i" KEY_SRIGHT, 0622, shifted right arrow +key_srsume, "kRES" "%j" KEY_SRSUME, 0623, shifted resume key +key_ssave, "kSAV" "!1" KEY_SSAVE, 0624, shifted save key +key_ssuspend, "kSPD" "!2" KEY_SSUSPEND, 0625, shifted suspend key +key_sundo, "kUND" "!3" KEY_SUNDO, 0626, shifted undo key +req_for_input, "rfi" "RF" send next input char (for ptys) +key_f11, "kf11" "F1" KEY_F(11), 0423, function key f11. +key_f12, "kf12" "F2" KEY_F(12), 0424, function key f12. +key_f13, "kf13" "F3" KEY_F(13), 0425, function key f13. +key_f14, "kf14" "F4" KEY_F(14), 0426, function key f14. +key_f15, "kf15" "F5" KEY_F(15), 0427, function key f15. +key_f16, "kf16" "F6" KEY_F(16), 0430, function key f16. +key_f17, "kf17" "F7" KEY_F(17), 0431, function key f17. +key_f18, "kf18" "F8" KEY_F(18), 0432, function key f18. +key_f19, "kf19" "F9" KEY_F(19), 0433, function key f19. +key_f20, "kf20" "FA" KEY_F(20), 0434, function key f20. +key_f21, "kf21" "FB" KEY_F(21), 0435, function key f21. +key_f22, "kf22" "FC" KEY_F(22), 0436, function key f22. +key_f23, "kf23" "FD" KEY_F(23), 0437, function key f23. +key_f24, "kf24" "FE" KEY_F(24), 0440, function key f24. +key_f25, "kf25" "FF" KEY_F(25), 0441, function key f25. +key_f26, "kf26" "FG" KEY_F(26), 0442, function key f26. +key_f27, "kf27" "FH" KEY_F(27), 0443, function key f27. +key_f28, "kf28" "FI" KEY_F(28), 0444, function key f28. +key_f29, "kf29" "FJ" KEY_F(29), 0445, function key f29. +key_f30, "kf30" "FK" KEY_F(30), 0446, function key f30. +key_f31, "kf31" "FL" KEY_F(31), 0447, function key f31. +key_f32, "kf32" "FM" KEY_F(32), 0450, function key f32. +key_f33, "kf33" "FN" KEY_F(33), 0451, function key f33. +key_f34, "kf34" "FO" KEY_F(34), 0452, function key f34. +key_f35, "kf35" "FP" KEY_F(35), 0453, function key f35. +key_f36, "kf36" "FQ" KEY_F(36), 0454, function key f36. +key_f37, "kf37" "FR" KEY_F(37), 0455, function key f37. +key_f38, "kf38" "FS" KEY_F(38), 0456, function key f38. +key_f39, "kf39" "FT" KEY_F(39), 0457, function key f39. +key_f40, "kf40" "FU" KEY_F(40), 0460, function key f40. +key_f41, "kf41" "FV" KEY_F(41), 0461, function key f41. +key_f42, "kf42" "FW" KEY_F(42), 0462, function key f42. +key_f43, "kf43" "FX" KEY_F(43), 0463, function key f43. +key_f44, "kf44" "FY" KEY_F(44), 0464, function key f44. +key_f45, "kf45" "FZ" KEY_F(45), 0465, function key f45. +key_f46, "kf46" "Fa" KEY_F(46), 0466, function key f46. +key_f47, "kf47" "Fb" KEY_F(47), 0467, function key f47. +key_f48, "kf48" "Fc" KEY_F(48), 0470, function key f48. +key_f49, "kf49" "Fd" KEY_F(49), 0471, function key f49. +key_f50, "kf50" "Fe" KEY_F(50), 0472, function key f50. +key_f51, "kf51" "Ff" KEY_F(51), 0473, function key f51. +key_f52, "kf52" "Fg" KEY_F(52), 0474, function key f52. +key_f53, "kf53" "Fh" KEY_F(53), 0475, function key f53. +key_f54, "kf54" "Fi" KEY_F(54), 0476, function key f54. +key_f55, "kf55" "Fj" KEY_F(55), 0477, function key f55. +key_f56, "kf56" "Fk" KEY_F(56), 0500, function key f56. +key_f57, "kf57" "Fl" KEY_F(57), 0501, function key f57. +key_f58, "kf58" "Fm" KEY_F(58), 0502, function key f58. +key_f59, "kf59" "Fn" KEY_F(59), 0503, function key f59. +key_f60, "kf60" "Fo" KEY_F(60), 0504, function key f60. +key_f61, "kf61" "Fp" KEY_F(61), 0505, function key f61. +key_f62, "kf62" "Fq" KEY_F(62), 0506, function key f62. +key_f63, "kf63" "Fr" KEY_F(63), 0507, function key f63. +clr_bol, "el1" "cb" Clear to beginning of line, inclusive +clear_margins, "mgc" "MC" Clear left and right soft margins +set_left_margin, "smgl" "ML" Set soft left margin +set_right_margin, "smgr" "MR" Set soft right margin +label_format, "fln" "Lf" Label format +# +# +# +set_clock, "sclk" "SC" Set time-of-day clock +display_clock, "dclk" "DK" Display time-of-day clock +remove_clock, "rmclk" "RC" Remove time-of-day clock +create_window, "cwin" "CW" Define win #1 to go from #2,#3 to #4,#5 +goto_window, "wingo" "WG" Got to window #1 +hangup, "hup" "HU" Hang-up phone +dial_phone, "dial" "DI" Dial phone number #1 +quick_dial, "qdial" "QD" Dial phone number #1, without progress detection +tone, "tone" "TO" Select touch tone dialing +pulse, "pulse" "PU" Select pulse dialing +flash_hook, "hook" "fh" Flash the switch hook +fixed_pause, "pause" "PA" Pause for 2-3 seconds +wait_tone, "wait" "WA" Wait for dial tone +user0, "u0" "u0" User string 0 +user1, "u1" "u1" User string 1 +user2, "u2" "u2" User string 2 +user3, "u3" "u3" User string 3 +user4, "u4" "u4" User string 4 +user5, "u5" "u5" User string 5 +user6, "u6" "u6" User string 6 +user7, "u7" "u7" User string 7 +user8, "u8" "u8" User string 8 +user9, "u9" "u9" User string 9 +orig_pair, "op" "op" Original color-pair +orig_colors, "oc" "oc" Original colors +initialize_color, "initc" "Ic" Initialize the definition of color +initialize_pair, "initp" "Ip" Initialize color pair +set_color_pair, "scp" "sp" Set color pair +set_foreground, "setf" "Sf" Set foreground color using RGB escape +set_background, "setb" "Sb" Set background color using RGB escape +# +# printer specific +# +change_char_pitch, "cpi" "ZA" Change no. characters per inch +change_line_pitch, "lpi" "ZB" Change no. lines per inch +change_res_horz, "chr" "ZC" Change horizontal resolution +change_res_vert, "cvr" "ZD" Change vertical resolution +define_char, "defc" "ZE" Define a character in a character set +enter_doublewide_mode, "swidm" "ZF" Enable double wide printing +enter_draft_quality, "sdrfq" "ZG" Set draft quality print +enter_italics_mode, "sitm" "ZH" Enable italics +enter_leftward_mode, "slm" "ZI" Enable leftward carriage motion +enter_micro_mode, "smicm" "ZJ" Enable micro motion capabilities +enter_near_letter_quality, "snlq" "ZK" Set near-letter quality print +enter_normal_quality, "snrmq" "ZL" Set normal quality print +enter_shadow_mode, "sshm" "ZM" Enable shadow printing +enter_subscript_mode, "ssubm" "ZN" Enable subscript printing +enter_superscript_mode, "ssupm" "ZO" Enable superscript printing +enter_upward_mode, "sum" "ZP" Enable upward carriage motion +exit_doublewide_mode, "rwidm" "ZQ" Disable double wide printing +exit_italics_mode, "ritm" "ZR" Disable italics +exit_leftward_mode, "rlm" "ZS" Enable rightward (normal) carriage motion +exit_micro_mode, "rmicm" "ZT" Disable micro motion capabilities +exit_shadow_mode, "rshm" "ZU" Disable shadow printing +exit_subscript_mode, "rsubm" "ZV" Disable subscript printing +exit_superscript_mode, "rsupm" "ZW" Disable superscript printing +exit_upward_mode, "rum" "ZX" Enable downward (normal) carriage motion +micro_column_address, "mhpa" "ZY" Like column_address for micro adjustment +micro_down, "mcud1" "ZZ" Like cursor_down for micro adjustment +micro_left, "mcub1" "Za" Like cursor_left for micro adjustment +micro_right, "mcuf1" "Zb" Like cursor_right for micro adjustment +micro_row_address, "mvpa" "Zc" Like row_address for micro adjustment +micro_up, "mcuu1" "Zd" Like cursor_up for micro adjustment +order_of_pins, "porder" "Ze" Matches software bits to print-head pins +parm_down_micro, "mcud" "Zf" Like parm_down_cursor for micro adjust. +parm_left_micro, "mcub" "Zg" Like parm_left_cursor for micro adjust. +parm_right_micro, "mcuf" "Zh" Like parm_right_cursor for micro adjust. +parm_up_micro, "mcuu" "Zi" Like parm_up_cursor for micro adjust. +select_char_set, "scs" "Zj" Select character set +set_bottom_margin, "smgb" "Zk" Set soft bottom margin at current line +set_bottom_margin_parm, "smgbp" "Zl" Set soft bottom margin +set_left_margin_parm, "smglp" "Zm" Set soft left margin +set_right_margin_parm, "smgrp" "Zn" Set soft right margin +set_top_margin, "smgt" "Zo" Set soft top margin at current line +set_top_margin_parm, "smgtp" "Zp" Set soft top margin +start_bit_image, "sbim" "Zq" Start printing bit image graphics +start_char_set_def, "scsd" "Zr" Start definition of a character set +stop_bit_image, "rbim" "Zs" End printing bit image graphics (use tputs) +stop_char_set_def, "rcsd" "Zt" End definition of a character set +subscript_characters, "subcs" "Zu" List of ``subscript-able'' characters +superscript_characters, "supcs" "Zv" List of ``superscript-able'' characters +these_cause_cr, "docr" "Zw" Printing any of these chars causes cr +zero_motion, "zerom" "Zx" No motion for the subsequent character +char_set_names, "csnm" "Zy" List of character set names +# +# end of SVR3.2 strings +# +# mouse support +# +key_mouse, "kmous" "Km" KEY_MOUSE, 0631, Mouse event has occured +mouse_info, "minfo" "Mi" Mouse status information +req_mouse_pos, "reqmp" "RQ" Request mouse position report +get_mouse, "getm" "Gm" Curses should get button events +# +# ANSI color strings and FK x-mit plus label +# +set_a_foreground, "setaf" "AF" Set foreground color using ANSI escape +set_a_background, "setab" "AB" Set background color using ANSI escape +pkey_plab, "pfxl" "xl" Prog key #1 to xmit string #2 and show string #3 +# +# multiple codeset support +# +device_type, "devt" "dv" Indicate language/codeset support +code_set_init, "csin" "ci" Init sequence for multiple codesets +set0_des_seq, "s0ds" "s0" Shift into codeset 0 (EUC set 0, ASCII) +set1_des_seq, "s1ds" "s1" Shift into codeset 1 +set2_des_seq, "s2ds" "s2" Shift into codeset 2 +set3_des_seq, "s3ds" "s3" Shift into codeset 3 +# +# Additional printer support +# +set_lr_margin, "smglr" "ML" Sets both left and right margins +set_tb_margin, "smgtb" "MT" Sets both top and bottom margins +bit_image_repeat, "birep" "Xy" Repeat bit-image cell #1 #2 times (use tparm) +bit_image_newline, "binel" "Zz" Move to next row of the bit image (use tparm) +bit_image_carriage_return, "bicr" "Yv" Move to beginning of same row (use tparm) +color_names, "colornm" "Yw" Give name for color #1 +define_bit_image_region, "defbi" "Yx" Define rectangular bit-image region (use tparm) +end_bit_image_region, "endbi" "Yy" End a bit-image region (use tparm) +set_color_band, "setcolor" "Yz" Change to ribbon color #1 +set_page_length, "slines" "YZ" Set page length to #1 lines (use tparm) +# +# Locus Merge terminfo strings required for PC scancode devices +# +display_pc_char, "dispc" "S1" Display PC character +enter_pc_charset_mode, "smpch" "S2" Enter PC character display mode +exit_pc_charset_mode, "rmpch" "S3" Disable PC character display mode +enter_scancode_mode, "smsc" "S4" Enter PC scancode mode +exit_scancode_mode, "rmsc" "S5" Disable PC scancode mode +pc_term_options, "pctrm" "S6" PC terminal options +scancode_escape, "scesc" "S7" Escape for scancode emulation +alt_scancode_esc, "scesa" "S8" Alternate escape for scancode emulation +# +# Addition capabilities needed for X/Curses +# +enter_horizontal_hl_mode, "ehhlm" "??" Horizontal highlight mode +enter_left_hl_mode, "elhlm" "??" Left highlight mode +enter_low_hl_mode, "elohlm" "??" Low highlight mode +enter_right_hl_mode, "erhlm" "??" Right highlight mode +enter_top_hl_mode, "ethlm" "??" Top highlight mode +enter_vertical_hl_mode, "evhlm" "??" Vertical highlight mode +set_a_attributes, "sgr1" "??" Define second set of attributes #1-#6 +set_pglen_inch, "slength" "YI" Set page length to #1/100 of an inch +# Add new Strings before this line. +--- end str |