610 files changed, 3517 insertions, 18408 deletions

diff --git a/usr/src/man/man1m/6to4relay.1m b/usr/src/man/man1m/6to4relay.1m
index fe53b93c84..aee93d0a1d 100644
--- a/usr/src/man/man1m/6to4relay.1m
+++ b/usr/src/man/man1m/6to4relay.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH 6to4relay 1M "19 Nov 2002" "SunOS 5.11" "System Administration Commands"
+.TH 6TO4RELAY 1M "Nov 19, 2002"
 .SH NAME
 6to4relay \- administer configuration for 6to4 relay router communication
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/6to4relay\fR 
+\fB/usr/sbin/6to4relay\fR
 .fi
 
 .LP
@@ -61,46 +61,38 @@ tunnel down
 The \fB6to4relay\fR command supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIaddr\fR\fR
 .ad
 .RS 11n
-.rt  
 Use the specified address, \fIaddr\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
 .RS 11n
-.rt  
 Enable support for relay router. Use \fB-a\fR \fIaddr\fR if it is specified.
 Otherwise, use the default \fBanycast\fR address, 192.88.99.1.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 11n
-.rt  
 Disable support for the relay router.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 11n
-.rt  
 Help
 .RE
 
@@ -110,12 +102,10 @@ Help
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIaddr\fR\fR
 .ad
 .RS 8n
-.rt  
 A specific relay router's unicast address. \fIaddr\fR must be specified as a
 dotted decimal representation of an IPv4 address. Otherwise, an error will
 occur, and the command will fail.
@@ -168,35 +158,29 @@ IPv4 destination address of Relay Router = 192.88.99.1
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR \fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/sbin/6to4relay\fR \fR
 .ad
 .RS 24n
-.rt  
 The default installation root
 .RE
 
diff --git a/usr/src/man/man1m/Intro.1m b/usr/src/man/man1m/Intro.1m
index 984c0630d4..cf75eb641d 100644
--- a/usr/src/man/man1m/Intro.1m
+++ b/usr/src/man/man1m/Intro.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH Intro 1M "17 Nov 2008" "SunOS 5.11" "System Administration Commands"
+.TH INTRO 1M "Nov 17, 2008"
 .SH NAME
 Intro, intro \- introduction to maintenance commands and application programs
 .SH DESCRIPTION
@@ -45,23 +45,19 @@ other arguments according to the following syntax:
 where:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIname\fR\fR
 .ad
 .RS 15n
-.rt  
 The name of an executable file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIoption\fR\fR
 .ad
 .RS 15n
-.rt  
 \fB\(mi\fR \fInoargletter\fR(\fIs\fR) or,
 .sp
 \fB\(mi\fR \fIargletter\fR<\|>\fIoptarg\fR
@@ -71,45 +67,37 @@ where <\|> is optional white space.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fInoargletter\fR\fR
 .ad
 .RS 15n
-.rt  
 A single letter representing an option without an argument.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIargletter\fR\fR
 .ad
 .RS 15n
-.rt  
 A single letter representing an option requiring an argument.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIoptarg\fR\fR
 .ad
 .RS 15n
-.rt  
 Argument (character string) satisfying preceding \fIargletter\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcmdarg\fR\fR
 .ad
 .RS 15n
-.rt  
 Pathname (or other command argument) \fInot\fR beginning with \fB\(mi\fR or,
 \fB\(mi\fR by itself indicating the standard input.
 .RE
diff --git a/usr/src/man/man1m/Uutry.1m b/usr/src/man/man1m/Uutry.1m
index 418ff30e22..d8b001a059 100644
--- a/usr/src/man/man1m/Uutry.1m
+++ b/usr/src/man/man1m/Uutry.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH Uutry 1M "18 May 1993" "SunOS 5.11" "System Administration Commands"
+.TH UUTRY 1M "May 18, 1993"
 .SH NAME
 Uutry, uutry \- attempt to contact remote system with debugging on
 .SH SYNOPSIS
@@ -24,24 +24,20 @@ of \fB5\fR. The debugging output is put in file \fB/tmp/\fR\fIsystem-name.\fR
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fR
 .ad
 .RS 19n
-.rt  
 This option overrides the retry time that is set in file
 \fB/var/uucp/.Status/\fR\fIsystem-name.\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fI type\fR \fR
 .ad
 .RS 19n
-.rt  
 The first field in the \fBDevices\fR file is the "Type" field.  The \fB-c\fR
 option forces \fBuucico\fR to use only entries in the "Type" field that  match
 the user-specified \fBtype\fR. The specified \fBtype\fR is usually the name of
@@ -50,12 +46,10 @@ a local area network.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fI debug-level\fR \fR
 .ad
 .RS 19n
-.rt  
 \fIdebug-level\fR is a number from \fB0\fR to \fB9\fR.  Higher numbers give
 more detailed debugging information.
 .RE
@@ -63,89 +57,73 @@ more detailed debugging information.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/uucp/Devices\fR \fR
 .ad
 .RS 28n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/uucp/Limits\fR \fR
 .ad
 .RS 28n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/uucp/Permissions\fR \fR
 .ad
 .RS 28n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/uucp/Systems\fR \fR
 .ad
 .RS 28n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/tmp/\fR\fIsystem-name\fR \fR
 .ad
 .RS 28n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/spool/locks/*\fR \fR
 .ad
 .RS 28n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/spool/uucp/*\fR \fR
 .ad
 .RS 28n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/spool/uucppublic/*\fR \fR
 .ad
 .RS 28n
-.rt  
 
 .RE
 
diff --git a/usr/src/man/man1m/accept.1m b/usr/src/man/man1m/accept.1m
index 950a80e730..e148c8045b 100644
--- a/usr/src/man/man1m/accept.1m
+++ b/usr/src/man/man1m/accept.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH accept 1M "5 Jun 2006" "SunOS 5.11" "System Administration Commands"
+.TH ACCEPT 1M "Jun 5, 2006"
 .SH NAME
 accept, reject \- accept or reject print requests
 .SH SYNOPSIS
@@ -41,12 +41,10 @@ and server.
 The following options are supported for \fBreject\fR:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIreason\fR\fR
 .ad
 .RS 13n
-.rt  
 Assigns a reason for rejection of print requests for \fIdestination.\fR
 .sp
 \fIreason\fR is reported by \fBlpstat\fR \fB-a\fR. By default, \fIreason\fR is
@@ -61,12 +59,10 @@ destinations added to the system but not yet accepting requests. Enclose
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdestination\fR\fR
 .ad
 .RS 15n
-.rt  
 The name of the destination accepting or rejecting print requests. Destination
 specifies the name of a printer or class of printers (see \fBlpadmin\fR(1M)).
 Specify \fIdestination\fR using atomic name or URI-style (scheme://endpoint)
@@ -80,79 +76,65 @@ conventions for destinations.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-zero\fR
 .ad
 .RS 12n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/printers.conf\fR\fR
 .ad
 .RS 24n
-.rt  
 System printer configuration database
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB$HOME/.printers\fR\fR
 .ad
 .RS 24n
-.rt  
 User-configurable printer database
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBou=printers\fR\fR
 .ad
 .RS 24n
-.rt  
 LDAP version of \fB/etc/printers.conf\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprinters.conf.byname\fR\fR
 .ad
 .RS 24n
-.rt  
 \fBNIS\fR version of \fB/etc/printers.conf\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprinters.org_dir\fR\fR
 .ad
 .RS 24n
-.rt  
 \fBNIS+\fR version of \fB/etc/printers.conf\fR
 .RE
 
@@ -164,15 +146,14 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-CSIEnabled. See \fBNOTES\fR.
+CSI	Enabled. See \fBNOTES\fR.
 _
-Interface StabilityObsolete
+Interface Stability	Obsolete
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/acct.1m b/usr/src/man/man1m/acct.1m
index e38ebc6137..c46ac7d6d0 100644
--- a/usr/src/man/man1m/acct.1m
+++ b/usr/src/man/man1m/acct.1m
@@ -3,14 +3,14 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH acct 1M "22 Feb 1999" "SunOS 5.11" "System Administration Commands"
+.TH ACCT 1M "Feb 22, 1999"
 .SH NAME
 acct, acctdisk, acctdusg, accton, acctwtmp, closewtmp, utmp2wtmp \- overview of
 accounting and miscellaneous accounting commands
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/acct/acctdisk\fR 
+\fB/usr/lib/acct/acctdisk\fR
 .fi
 
 .LP
@@ -30,12 +30,12 @@ accounting and miscellaneous accounting commands
 
 .LP
 .nf
-\fB/usr/lib/acct/closewtmp\fR 
+\fB/usr/lib/acct/closewtmp\fR
 .fi
 
 .LP
 .nf
-\fB/usr/lib/acct/utmp2wtmp\fR 
+\fB/usr/lib/acct/utmp2wtmp\fR
 .fi
 
 .SH DESCRIPTION
@@ -116,12 +116,10 @@ for connect times of users currently logged in.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIfilename\fR\fR
 .ad
 .RS 15n
-.rt  
 Places in \fIfilename\fR records consisting of those filenames for which
 \fBacctdusg\fR charges no one (a potential source for finding users trying to
 avoid disk charges).
@@ -129,12 +127,10 @@ avoid disk charges).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIfilename\fR\fR
 .ad
 .RS 15n
-.rt  
 Specifies a password file, \fIfilename\fR. This option is not needed if the
 password file is \fB/etc/passwd\fR.
 .RE
@@ -152,12 +148,10 @@ none of the above variables are set in the environment, the "C" (U.S. style)
 locale determines how \fBacct\fR behaves.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLC_CTYPE\fR\fR
 .ad
 .RS 12n
-.rt  
 Determines how \fBacct\fR handles characters. When \fBLC_CTYPE\fR is set to a
 valid value, \fBacct\fR can display and handle text and filenames containing
 valid characters for that locale. \fBacct\fR can display and handle Extended
@@ -168,12 +162,10 @@ the "C" locale, only characters from ISO 8859-1 are valid.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLC_TIME\fR\fR
 .ad
 .RS 12n
-.rt  
 Determines how \fBacct\fR handles date and time formats. In the "C" locale,
 date and time handling follows the U.S. rules.
 .RE
@@ -181,45 +173,37 @@ date and time handling follows the U.S. rules.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/passwd\fR\fR
 .ad
 .RS 18n
-.rt  
 Used for login name to user \fBID\fR conversions.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/acct\fR\fR
 .ad
 .RS 18n
-.rt  
 Holds all accounting commands listed in sub-class 1M of this manual.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/pacct\fR\fR
 .ad
 .RS 18n
-.rt  
 Current process accounting file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/wtmpx\fR\fR
 .ad
 .RS 18n
-.rt  
 History of user access and administration information..
 .RE
 
diff --git a/usr/src/man/man1m/acctadm.1m b/usr/src/man/man1m/acctadm.1m
index 1351f9a15a..ce6a1e19ef 100644
--- a/usr/src/man/man1m/acctadm.1m
+++ b/usr/src/man/man1m/acctadm.1m
@@ -3,14 +3,14 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH acctadm 1M "17 Dec 2008" "SunOS 5.11" "System Administration Commands"
+.TH ACCTADM 1M "Dec 17, 2008"
 .SH NAME
 acctadm \- configure extended accounting facility
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/acctadm\fR [\fB-DEsrux\fR] [\fB-d\fR \fIresource_list\fR] 
-     [\fB-e\fR \fIresource_list\fR] [\fB-f\fR \fIfilename\fR] 
+\fB/usr/sbin/acctadm\fR [\fB-DEsrux\fR] [\fB-d\fR \fIresource_list\fR]
+     [\fB-e\fR \fIresource_list\fR] [\fB-f\fR \fIfilename\fR]
      [task | process | flow | net]
 .fi
 
@@ -26,7 +26,6 @@ extended accounting facility.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIresource_list\fR\fR
 .ad
@@ -40,7 +39,6 @@ This option requires an operand. See \fBOPERANDS\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
@@ -54,7 +52,6 @@ option. See \fB-x\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIresource_list\fR\fR
 .ad
@@ -68,7 +65,6 @@ This option requires an operand. See \fBOPERANDS\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-E\fR\fR
 .ad
@@ -80,7 +76,6 @@ output to a file. This option requires an operand. See \fBOPERANDS\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfilename\fR\fR
 .ad
@@ -94,7 +89,6 @@ This option requires an operand. See \fBOPERANDS\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -109,7 +103,6 @@ resource groups for all available accounting types. See OPERANDS.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
@@ -121,7 +114,6 @@ extended accounting configuration at boot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
@@ -143,7 +135,6 @@ require an operand.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprocess\fR\fR
 .ad
@@ -155,7 +146,6 @@ accounting facility.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtask\fR\fR
 .ad
@@ -167,7 +157,6 @@ facility.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBflow\fR\fR
 .ad
@@ -179,7 +168,6 @@ facility.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnet\fR\fR
 .ad
@@ -254,7 +242,7 @@ The following command displays available resource groups:
 .nf
 $ \fBacctadm -r\fR
   process:
-  extended pid,uid,gid,cpu,time,command,tty,projid, \e 
+  extended pid,uid,gid,cpu,time,command,tty,projid, \e
   taskid,ancpid,wait-status,zone,flag,memory,mstate
   basic    pid,uid,gid,cpu,time,command,tty,flag
   task:
@@ -303,7 +291,6 @@ $ \fBacctadm -r task\fR
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -317,7 +304,6 @@ successfully.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
@@ -331,7 +317,6 @@ configuration.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
@@ -342,7 +327,6 @@ Invalid command line options were specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB95\fR\fR
 .ad
@@ -354,7 +338,6 @@ service instance.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB96\fR\fR
 .ad
@@ -372,13 +355,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/acctcms.1m b/usr/src/man/man1m/acctcms.1m
index 50b35b1de3..c4ed9a6f3e 100644
--- a/usr/src/man/man1m/acctcms.1m
+++ b/usr/src/man/man1m/acctcms.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH acctcms 1M "22 Feb 1999" "SunOS 5.11" "System Administration Commands"
+.TH ACCTCMS 1M "Feb 22, 1999"
 .SH NAME
 acctcms \- command summary from process accounting records
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/acct/acctcms\fR [\fB-a\fR [\fB-o\fR] [\fB-p\fR]] [\fB-c\fR] [\fB-j\fR] [\fB-n\fR] [\fB-s\fR] 
+\fB/usr/lib/acct/acctcms\fR [\fB-a\fR [\fB-o\fR] [\fB-p\fR]] [\fB-c\fR] [\fB-j\fR] [\fB-n\fR] [\fB-s\fR]
      [\fB-t\fR] \fIfilename\fR...
 .fi
 
@@ -23,12 +23,10 @@ normally using an internal summary format.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 Print output in \fBASCII\fR rather than in the internal summary format. The
 output includes command name, number of times executed, total kcore-minutes,
 total \fBCPU\fR minutes, total real minutes, mean size (in K), mean \fBCPU\fR
@@ -39,23 +37,19 @@ kcore-minutes.
 Use the following options only with the \fB-a\fR option:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 6n
-.rt  
 Output a (non-prime) offshift-time-only command summary.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 6n
-.rt  
 Output a prime-time-only command summary.
 .RE
 
@@ -67,56 +61,46 @@ into prime and non-prime.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 6n
-.rt  
 Sort by total \fBCPU\fR time, rather than total kcore-minutes.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-j\fR\fR
 .ad
 .RS 6n
-.rt  
 Combine all commands invoked only once under "***other".
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 6n
-.rt  
 Sort by number of command invocations.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 6n
-.rt  
 Any file names encountered hereafter are already in internal summary format.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
 .RS 6n
-.rt  
 Process all records as total accounting records. The default internal summary
 format splits each field into prime and non-prime-time parts. This option
 combines the prime and non-prime time parts into a single field that is the
diff --git a/usr/src/man/man1m/acctcon.1m b/usr/src/man/man1m/acctcon.1m
index 9ef1c2be1e..18b5dc41af 100644
--- a/usr/src/man/man1m/acctcon.1m
+++ b/usr/src/man/man1m/acctcon.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH acctcon 1M "22 Feb 1999" "SunOS 5.11" "System Administration Commands"
+.TH ACCTCON 1M "Feb 22, 1999"
 .SH NAME
 acctcon, acctcon1, acctcon2 \- connect-time accounting
 .SH SYNOPSIS
@@ -19,7 +19,7 @@ acctcon, acctcon1, acctcon2 \- connect-time accounting
 
 .LP
 .nf
-\fB/usr/lib/acct/acctcon2\fR 
+\fB/usr/lib/acct/acctcon2\fR
 .fi
 
 .SH DESCRIPTION
@@ -44,24 +44,20 @@ described below, as well as with the \fB-p\fR and \fB-t\fR options.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 14n
-.rt  
 Print input only, showing line name, login name, and time (in both numeric and
 date/time formats).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
 .RS 14n
-.rt  
 \fBacctcon1\fR maintains a list of lines on which users are logged in. When it
 reaches the end of its input, it emits a session record for each line that
 still appears to be active. It normally assumes that its input is a current
@@ -73,12 +69,10 @@ non-current files.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlineuse\fR\fR
 .ad
 .RS 14n
-.rt  
 \fIlineuse\fR is created to contain a summary of line usage showing line name,
 number of minutes used, percentage of total elapsed time used, number of
 sessions charged, number of logins, and number of logoffs.  This file helps
@@ -90,12 +84,10 @@ times the number of sessions. See \fB init\fR(1M) and \fButmpx\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIreboot\fR\fR
 .ad
 .RS 14n
-.rt  
 \fBreboot\fR is filled with an overall record for the accounting period, giving
 starting time, ending time, number of reboots, and number of date changes.
 .RE
@@ -123,7 +115,7 @@ The \fBacctcon1\fR and \fBacctcon2\fR commands are typically used as follows:
 .in +2
 .nf
 example% acctcon1 \fB-l\fR lineuse \fB-o\fR reboots < tmpwtmp | sort +1n +2 > ctmp
-example% acctcon2 < ctmp > ctacct 
+example% acctcon2 < ctmp > ctacct
 .fi
 .in -2
 .sp
@@ -131,12 +123,10 @@ example% acctcon2 < ctmp > ctacct
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/wtmpx\fR\fR
 .ad
 .RS 18n
-.rt  
 History of user access and administration information
 .RE
 
diff --git a/usr/src/man/man1m/acctmerg.1m b/usr/src/man/man1m/acctmerg.1m
index 8b721d8e88..b19cd3556b 100644
--- a/usr/src/man/man1m/acctmerg.1m
+++ b/usr/src/man/man1m/acctmerg.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH acctmerg 1M "22 Feb 1999" "SunOS 5.11" "System Administration Commands"
+.TH ACCTMERG 1M "Feb 22, 1999"
 .SH NAME
 acctmerg \- merge or add total accounting files
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/acct/acctmerg\fR [\fB-a\fR] [\fB-i\fR] [\fB-p\fR] [\fB-t\fR] [\fB-u\fR] [\fB-v\fR] 
+\fB/usr/lib/acct/acctmerg\fR [\fB-a\fR] [\fB-i\fR] [\fB-p\fR] [\fB-t\fR] [\fB-u\fR] [\fB-v\fR]
      [\fIfilename\fR] ...
 .fi
 
@@ -24,67 +24,55 @@ keys.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 Produce output in \fBASCII\fR version of \fBtacct\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 6n
-.rt  
 Produce input in \fBASCII\fR version of \fBtacct\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 6n
-.rt  
 Print input with no processing.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
 .RS 6n
-.rt  
 Produce a single record that totals all input.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
 .RS 6n
-.rt  
 Summarize by user \fBID,\fR rather than by user \fBID\fR and name.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 Produce output in verbose \fBASCII\fR format, with more precise notation for
 floating-point numbers.
 .RE
@@ -100,7 +88,7 @@ format:
 .sp
 .in +2
 .nf
-example% acctmerg \|\|\fB-v\fR \|<\fIfilename1\fR\fB\|>\fR\fIfilename2\fR 
+example% acctmerg \|\|\fB-v\fR \|<\fIfilename1\fR\fB\|>\fR\fIfilename2\fR
 .fi
 .in -2
 .sp
@@ -112,7 +100,7 @@ Edit \fIfilename2\fR as you want:
 .sp
 .in +2
 .nf
-\fBexample% acctmerg \|\|\fR\fB-i\fR\fB \|\fR\fI<filename2\fR\fB\|>\fR\fIfilename1\fR 
+\fBexample% acctmerg \|\|\fR\fB-i\fR\fB \|\fR\fI<filename2\fR\fB\|>\fR\fIfilename1\fR
 .fi
 .in -2
 .sp
diff --git a/usr/src/man/man1m/acctprc.1m b/usr/src/man/man1m/acctprc.1m
index 0673ab0e77..4224b0d2cf 100644
--- a/usr/src/man/man1m/acctprc.1m
+++ b/usr/src/man/man1m/acctprc.1m
@@ -4,13 +4,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH acctprc 1M "15 July 2004" "SunOS 5.11" "System Administration Commands"
+.TH ACCTPRC 1M "Jul 15, 2004"
 .SH NAME
 acctprc, acctprc1, acctprc2 \- process accounting
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/acct/acctprc\fR 
+\fB/usr/lib/acct/acctprc\fR
 .fi
 
 .LP
@@ -20,7 +20,7 @@ acctprc, acctprc1, acctprc2 \- process accounting
 
 .LP
 .nf
-\fB/usr/lib/acct/acctprc2\fR 
+\fB/usr/lib/acct/acctprc2\fR
 .fi
 
 .SH DESCRIPTION
@@ -70,7 +70,7 @@ below:
 .in +2
 .nf
 example% acctprc1 \|ctmp \|</var/adm/pacct
-example% acctprc2 > ptacct 
+example% acctprc2 > ptacct
 .fi
 .in -2
 .sp
@@ -78,12 +78,10 @@ example% acctprc2 > ptacct
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/passwd\fR\fR
 .ad
 .RS 15n
-.rt  
 system password file
 .RE
 
diff --git a/usr/src/man/man1m/acctsh.1m b/usr/src/man/man1m/acctsh.1m
index fdb8e261e6..6b2aef67be 100644
--- a/usr/src/man/man1m/acctsh.1m
+++ b/usr/src/man/man1m/acctsh.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH acctsh 1M "15 Mar 2002" "SunOS 5.11" "System Administration Commands"
+.TH ACCTSH 1M "Mar 15, 2002"
 .SH NAME
 acctsh, chargefee, ckpacct, dodisk, lastlogin, monacct, nulladm, prctmp,
 prdaily, prtacct, shutacct, startup, turnacct \- shell procedures for
@@ -26,7 +26,7 @@ accounting
 
 .LP
 .nf
-\fB/usr/lib/acct/lastlogin\fR 
+\fB/usr/lib/acct/lastlogin\fR
 .fi
 
 .LP
@@ -61,7 +61,7 @@ accounting
 
 .LP
 .nf
-\fB/usr/lib/acct/startup\fR 
+\fB/usr/lib/acct/startup\fR
 .fi
 
 .LP
@@ -164,24 +164,20 @@ accounting.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 6n
-.rt  
 This option prints a report of exceptional resource usage by command, and may
 be used on current day's accounting data only.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 6n
-.rt  
 This option prints a report of exceptional usage by login id for the specified
 date. Previous daily reports are cleaned up and therefore inaccessible after
 each invocation of \fBmonacct\fR.
@@ -189,12 +185,10 @@ each invocation of \fBmonacct\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 6n
-.rt  
 This option uses \fBacctdusg\fR (see \fBacct\fR(1M)) to do a slower version of
 disk accounting by login directory. \fIfilename\fRs specifies the one or more
 filesystem names where disk accounting will be done.  If \fIfilename\fRs are
@@ -207,134 +201,110 @@ names of mountable filesystems.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/logadm.conf\fR\fR
 .ad
 .RS 30n
-.rt  
 Configuration file for the \fBlogadm\fR(1M) command
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/acct\fR\fR
 .ad
 .RS 30n
-.rt  
 Holds all accounting commands listed in section \fB1M\fR of this manual
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/acct/ptecms.awk\fR\fR
 .ad
 .RS 30n
-.rt  
 Contains the limits for exceptional usage by command name
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/acct/ptelus.awk\fR\fR
 .ad
 .RS 30n
-.rt  
 Contains the limits for exceptional usage by login \fBID\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/acct/fiscal\fR\fR
 .ad
 .RS 30n
-.rt  
 Fiscal reports directory
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/acct/nite\fR\fR
 .ad
 .RS 30n
-.rt  
 Working directory
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/acct/sum\fR\fR
 .ad
 .RS 30n
-.rt  
 Summary directory that contains information for \fBmonacct\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/acct/sum/loginlog\fR\fR
 .ad
 .RS 30n
-.rt  
 File updated by last login
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/fee\fR\fR
 .ad
 .RS 30n
-.rt  
 Accumulator for fees
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/pacct\fR\fR
 .ad
 .RS 30n
-.rt  
 Current file for per-process accounting
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/pacct\fR\fIincr\fR\fR
 .ad
 .RS 30n
-.rt  
 Used if \fBpacct\fR gets large and during execution of daily accounting
 procedure
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/wtmpx\fR\fR
 .ad
 .RS 30n
-.rt  
 History of user access and administration information
 .RE
 
diff --git a/usr/src/man/man1m/adbgen.1m b/usr/src/man/man1m/adbgen.1m
index 8e80a04aa6..41e9f98dcc 100644
--- a/usr/src/man/man1m/adbgen.1m
+++ b/usr/src/man/man1m/adbgen.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH adbgen 1M "20 Feb 1998" "SunOS 5.11" "System Administration Commands"
+.TH ADBGEN 1M "Feb 20, 1998"
 .SH NAME
 adbgen \- generate adb script
 .SH SYNOPSIS
@@ -57,67 +57,55 @@ format specifiers are:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB{POINTER}\fR\fR
 .ad
 .RS 14n
-.rt  
 pointer value in hexadecimal
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB{LONGDEC}\fR\fR
 .ad
 .RS 14n
-.rt  
 long value in decimal
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB{ULONGDEC}\fR\fR
 .ad
 .RS 14n
-.rt  
 unsigned long value in decimal
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB{ULONGHEX}\fR\fR
 .ad
 .RS 14n
-.rt  
 unsigned long value in hexadecimal
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB{LONGOCT}\fR\fR
 .ad
 .RS 14n
-.rt  
 long value in octal
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB{ULONGOCT}\fR\fR
 .ad
 .RS 14n
-.rt  
 unsigned long value in octal
 .RE
 
@@ -186,12 +174,10 @@ against the size of the \fBadb\fR format code and warns if they are not equal.
 The following option is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fImodel\fR\fR
 .ad
 .RS 12n
-.rt  
 Specifies the data type model to be used by \fBadbgen\fR for the macro. This
 affects the outcome of the \fB{\fR\fIformat specifier\fR\fB}\fR requests
 described under \fBDESCRIPTION\fR and the offsets and sizes of data types.
@@ -205,12 +191,10 @@ given, the data type model defaults to \fBilp32\fR.
 The following operand is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfilename\fR\fB\&.adb\fR\fR
 .ad
 .RS 18n
-.rt  
 Input file that contains header information, followed by a null line, the name
 of the structure, and finally an \fBadb\fR script.
 .RE
@@ -314,7 +298,6 @@ x$<script
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/platform/\fR\fIplatform-name\fR\fB/lib/adb/*\fR\fR
 .ad
@@ -325,7 +308,6 @@ platform-specific \fBadb\fR scripts for debugging the 32-bit kernel
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/platform/\fR\fIplatform-name\fR\fB/lib/adb/sparcv9/*\fR\fR
 .ad
@@ -336,7 +318,6 @@ platform-specific \fBadb\fR scripts for debugging the 64-bit SPARC V9 kernel
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/adb/*\fR\fR
 .ad
@@ -347,7 +328,6 @@ platform-specific \fBadb\fR scripts for debugging the 64-bit SPARC V9 kernel
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/adb/sparcv9/*\fR\fR
 .ad
diff --git a/usr/src/man/man1m/add_allocatable.1m b/usr/src/man/man1m/add_allocatable.1m
index 151f76633a..3a158e92f0 100644
--- a/usr/src/man/man1m/add_allocatable.1m
+++ b/usr/src/man/man1m/add_allocatable.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH add_allocatable 1M "20 Jul 2007" "SunOS 5.11" "System Administration Commands"
+.TH ADD_ALLOCATABLE 1M "Jul 20, 2007"
 .SH NAME
 add_allocatable \- add entries to allocation databases
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/add_allocatable\fR [\fB-f\fR] [\fB-s\fR] [\fB-d\fR] \fB-n\fR \fIname\fR \fB-t\fR \fItype\fR \fB-l\fR \fIdevice-list\fR 
+\fB/usr/sbin/add_allocatable\fR [\fB-f\fR] [\fB-s\fR] [\fB-d\fR] \fB-n\fR \fIname\fR \fB-t\fR \fItype\fR \fB-l\fR \fIdevice-list\fR
     [\fB-a\fR \fIauthorization\fR] [\fB-c\fR \fIclean\fR] [\fB-o\fR \fIkey\fR=\fIvalue\fR]
 .fi
 
@@ -36,12 +36,10 @@ their attributes, and device paths.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 20n
-.rt  
 Force an update of an already-existing entry with the specified information.
 \fBadd_allocatable\fR exits with an error if this option is not specified when
 an entry with the specified device name already exists.
@@ -49,59 +47,49 @@ an entry with the specified device name already exists.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 20n
-.rt  
 Turn on silent mode. \fBadd_allocatable\fR does not print any error or warning
 messages.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 20n
-.rt  
 If this option is present, \fBadd_allocatable\fR updates the system-supplied
 default attributes of the device type specified with \fB-t\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fIname\fR\fR
 .ad
 .RS 20n
-.rt  
 Adds or updates an entry for device that is specified by \fIname\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fItype\fR\fR
 .ad
 .RS 20n
-.rt  
 Adds or updates device entries that are of a type that are specified by
 \fItype\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIdevice-list\fR\fR
 .ad
 .RS 20n
-.rt  
 Adds or updates device paths to the device that is specified with \fB-n\fR.
 Multiple paths in \fIdevice-list\fR must be separated by white spaces and the
 list must be quoted.
@@ -109,12 +97,10 @@ list must be quoted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIauthorization\fR\fR
 .ad
 .RS 20n
-.rt  
 Adds or updates the authorization that is associated with either the device
 that is specified with \fB-n\fR or with devices of the type that is specified
 with \fB-t\fR. When more than one authorization is specified, the list must be
@@ -126,12 +112,10 @@ the at sign (@) and must be quoted. Default authorization is '@'.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIclean\fR\fR
 .ad
 .RS 20n
-.rt  
 Specifies the \fBdevice_clean\fR(5) program \fIclean\fR to be used with the
 device that is specified with \fB-n\fR or with devices of the type that is
 specified with \fB-t\fR. The default clean program is \fB/bin/true\fR.
@@ -139,46 +123,38 @@ specified with \fB-t\fR. The default clean program is \fB/bin/true\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIkey\fR=\fIvalue\fR\fR
 .ad
 .RS 20n
-.rt  
 Accepts a string of colon-separated \fB\fIkey\fR=\fIvalue\fR\fR pairs for a
 device that is specified with \fB-n\fR or with devices of the type that is
 specified with \fB-t\fR. The following keys are currently interpreted by the
 system:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBminlabel\fR\fR
 .ad
 .RS 12n
-.rt  
 The minimum label at which the device can be used.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmaxlabel\fR\fR
 .ad
 .RS 12n
-.rt  
 The maximum label at which the device can be used.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBclass\fR\fR
 .ad
 .RS 12n
-.rt  
 Specifies a logical  grouping of devices. For example, all Sun
 Ray\u\s-2TM\s+2\d devices of all device types is a logical grouping. The
 \fBclass\fR keyword has no default value.
@@ -186,12 +162,10 @@ Ray\u\s-2TM\s+2\d devices of all device types is a logical grouping. The
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBxdpy\fR\fR
 .ad
 .RS 12n
-.rt  
 Specifies the display name of the X session. This keyword is used to identify
 devices that are associated with the X session. The \fBxdpy\fR keyword has no
 default value.
@@ -207,46 +181,38 @@ When successful, \fBadd_allocate\fR returns an exit status of \fB0\fR (true).
 exit codes are as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Invocation syntax error
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Unknown system error
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 5n
-.rt  
 An entry already exists for the specified device. This error occurs only when
 the \fB-f\fR option is not specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR\fR
 .ad
 .RS 5n
-.rt  
 Permission denied. User does not have DAC or MAC access record updates.
 .RE
 
@@ -258,13 +224,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.82i) |cw(2.68i) 
-lw(2.82i) |lw(2.68i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/add_drv.1m b/usr/src/man/man1m/add_drv.1m
index e3341f9d54..c017280317 100644
--- a/usr/src/man/man1m/add_drv.1m
+++ b/usr/src/man/man1m/add_drv.1m
@@ -3,14 +3,14 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH add_drv 1M "1 Dec 2005" "SunOS 5.11" "System Administration Commands"
+.TH ADD_DRV 1M "Dec 1, 2005"
 .SH NAME
 add_drv \- add a new device driver to the system
 .SH SYNOPSIS
 .LP
 .nf
-\fBadd_drv\fR [\fB-b\fR \fIbasedir\fR] [\fB-c\fR \fIclass_name\fR] 
-     [\fB-i\fR '\fIidentify_name\fR...'] [\fB-m\fR '\fIpermission\fR','...'] 
+\fBadd_drv\fR [\fB-b\fR \fIbasedir\fR] [\fB-c\fR \fIclass_name\fR]
+     [\fB-i\fR '\fIidentify_name\fR...'] [\fB-m\fR '\fIpermission\fR','...']
      [\fB-p\fR '\fIpolicy\fR'] [\fB-P\fR \fIprivilege\fR] [\fB-n\fR] [\fB-f\fR] [\fB-v\fR] \fIdevice_driver\fR
 .fi
 
@@ -48,7 +48,7 @@ Aliases might require quoting (with double-quotes) if they contain numbers. See
 obtain permission information. The permission specified is applied to matching
 minor nodes created when a device bound to the driver is attached. A minor
 node's permission may be manually changed by \fBchmod\fR(1). For such nodes,
-the specified permissions apply, overriding the default 	permissions specified
+the specified permissions apply, overriding the default permissions specified
 via \fBadd_drv\fR or \fBupdate_drv\fR(1M).
 .sp
 .LP
@@ -139,12 +139,10 @@ The \fB-b\fR option is described below.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR \fIbasedir\fR\fR
 .ad
 .RS 26n
-.rt  
 Installs the driver on the system with a root directory of \fIbasedir\fR rather
 than installing on the system executing \fBadd_drv\fR. This option is typically
 used in package post-installation scripts when the package is not being
@@ -164,23 +162,19 @@ zone's file system. See \fBzones\fR(5).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIclass_name\fR\fR
 .ad
 .RS 26n
-.rt  
 The driver being added to the system exports the class \fIclass_name\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 26n
-.rt  
 Normally if a reconfiguration boot is required to complete the configuration of
 the driver into the system, \fBadd_drv\fR will not add the driver. The force
 flag forces \fBadd_drv\fR to add the driver even if a reconfiguration boot is
@@ -189,47 +183,39 @@ required. See the \fB-v\fR flag.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fB\&'\fR\fIidentify_name\fR\fB\&'\fR\fR
 .ad
 .RS 26n
-.rt  
 A white-space separated list of aliases for the driver \fIdevice_driver\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fB\&'\fR\fIpermission\fR\fB\&'\fR\fR
 .ad
 .RS 26n
-.rt  
 Specify the file system permissions for device nodes created by the system on
 behalf of \fIdevice_driver\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 26n
-.rt  
 Do not try to load and attach \fIdevice_driver\fR, just modify the system
 configuration files for the \fIdevice_driver\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR '\fIpolicy\fR\fB\&'\fR\fR
 .ad
 .RS 26n
-.rt  
 Specify an additional device security policy.
 .sp
 The device security policy constists of several whitespace separated tokens:
@@ -269,24 +255,20 @@ A missing minor spec is interpreted as a \fB*\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR '\fIprivilege\fR\fB\&'\fR\fI\fR\fR
 .ad
 .RS 26n
-.rt  
 Specify additional, comma separated, privileges used by the driver. You can
 also use specific privileges in the device's policy.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 26n
-.rt  
 The verbose flag causes \fBadd_drv\fR to provide additional information
 regarding the success or failure of a driver's configuration into the system.
 See the \fBEXAMPLES\fR section.
@@ -454,7 +436,6 @@ example# add_drv -i '"pci10c5,25"' smc
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/kernel/drv\fR\fR
 .ad
@@ -465,7 +446,6 @@ example# add_drv -i '"pci10c5,25"' smc
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/kernel/drv/sparcv9\fR\fR
 .ad
@@ -476,7 +456,6 @@ example# add_drv -i '"pci10c5,25"' smc
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/kernel/drv/amd64\fR\fR
 .ad
@@ -487,7 +466,6 @@ example# add_drv -i '"pci10c5,25"' smc
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/kernel/drv\fR\fR
 .ad
@@ -498,7 +476,6 @@ other 32-bit drivers that could potentially be shared between platforms
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/kernel/drv/sparcv9\fR\fR
 .ad
@@ -509,7 +486,6 @@ other 64-bit SPARC drivers that could potentially be shared between platforms
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/kernel/drv/amd64\fR\fR
 .ad
@@ -520,7 +496,6 @@ other 64-bit x86 drivers that could potentially be shared between platforms
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/platform/`uname\fR \fB-i`/kernel/drv\fR\fR
 .ad
@@ -531,7 +506,6 @@ other 64-bit x86 drivers that could potentially be shared between platforms
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/platform/`uname\fR \fB-i`/kernel/drv/sparcv9\fR\fR
 .ad
@@ -542,7 +516,6 @@ other 64-bit x86 drivers that could potentially be shared between platforms
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/platform/`uname\fR \fB-i`/kernel/drv/amd64\fR\fR
 .ad
@@ -553,7 +526,6 @@ other 64-bit x86 drivers that could potentially be shared between platforms
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/driver_aliases\fR\fR
 .ad
@@ -564,7 +536,6 @@ driver aliases file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/driver_classes\fR\fR
 .ad
@@ -575,7 +546,6 @@ driver classes file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/minor_perm\fR\fR
 .ad
@@ -586,7 +556,6 @@ minor node permissions
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/name_to_major\fR\fR
 .ad
@@ -597,7 +566,6 @@ major number binding
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/device_policy\fR\fR
 .ad
@@ -608,7 +576,6 @@ device policy
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/extra_privs\fR\fR
 .ad
diff --git a/usr/src/man/man1m/addbadsec.1m b/usr/src/man/man1m/addbadsec.1m
index 04140afe41..f47282dbf6 100644
--- a/usr/src/man/man1m/addbadsec.1m
+++ b/usr/src/man/man1m/addbadsec.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH addbadsec 1M "24 Feb 1998" "SunOS 5.11" "System Administration Commands"
+.TH ADDBADSEC 1M "Feb 24, 1998"
 .SH NAME
 addbadsec \- map out defective disk blocks
 .SH SYNOPSIS
@@ -36,12 +36,10 @@ might have to be recovered from a backup.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 Adds the specified blocks to the hardware or software map. If more than one
 block number is specified, the entire list should be quoted and block numbers
 should be separated by white space.
@@ -49,24 +47,20 @@ should be separated by white space.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 6n
-.rt  
 Adds the specified blocks to the hardware or software map. The bad blocks are
 listed, one per line, in the specified file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 6n
-.rt  
 Causes \fBaddbadsec\fR to print the current software map. The output shows the
 defective block and the assigned alternate. This option cannot be used to print
 the hardware map.
@@ -78,12 +72,10 @@ the hardware map.
 The following operand is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIraw_device\fR\fR
 .ad
 .RS 14n
-.rt  
 The address of the disk drive (see \fBFILES\fR).
 .RE
 
diff --git a/usr/src/man/man1m/arp.1m b/usr/src/man/man1m/arp.1m
index b769944186..11fa0164f0 100644
--- a/usr/src/man/man1m/arp.1m
+++ b/usr/src/man/man1m/arp.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH arp 1M "5 Jan 2009" "SunOS 5.11" "System Administration Commands"
+.TH ARP 1M "Jan 5, 2009"
 .SH NAME
 arp \- address resolution display and control
 .SH SYNOPSIS
@@ -30,7 +30,7 @@ arp \- address resolution display and control
 
 .LP
 .nf
-\fBarp\fR \fB-s\fR \fIhostname\fR \fIether_address\fR [temp] [pub] [trail] 
+\fBarp\fR \fB-s\fR \fIhostname\fR \fIether_address\fR [temp] [pub] [trail]
      [permanent]
 .fi
 
@@ -52,22 +52,18 @@ Options that modify the ARP translation tables (\fB-d\fR, \fB-f\fR, and
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 Display all of the current \fBARP\fR entries. The definition for the flags in
 the table are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBd\fR\fR
 .ad
 .RS 5n
-.rt  
 Unverified; this is a local IP address that is currently undergoing Duplicate
 Address Detection. ARP will not respond to requests for this address until
 Duplicate Address Detection completes.
@@ -75,24 +71,20 @@ Duplicate Address Detection completes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBo\fR\fR
 .ad
 .RS 5n
-.rt  
 Old; this entry is aging away. If IP requests it again, a new ARP query will be
 generated. This state is used for detecting peer address changes.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBy\fR\fR
 .ad
 .RS 5n
-.rt  
 Delayed; periodic address defense and conflict detection was unable to send a
 packet due to internal network use limits for non-traffic-related messages (100
 packets per hour per interface). This occurs only on interfaces with very large
@@ -101,47 +93,39 @@ numbers of aliases.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBA\fR\fR
 .ad
 .RS 5n
-.rt  
 Authority; this machine is authoritative for this IP address. ARP will not
 accept updates from other machines for this entry.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBL\fR\fR
 .ad
 .RS 5n
-.rt  
 Local; this is a local IP address configured on one of the machine's logical
 interfaces. ARP will defend this address if another node attempts to claim it.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBM\fR\fR
 .ad
 .RS 5n
-.rt  
 Mapping; only used for the multicast entry for \fB224.0.0.0\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBP\fR\fR
 .ad
 .RS 5n
-.rt  
 Publish; includes IP address for the machine and the addresses that have
 explicitly been added by the \fB-s\fR option. ARP will respond to ARP requests
 for this address.
@@ -149,24 +133,20 @@ for this address.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBS\fR\fR
 .ad
 .RS 5n
-.rt  
 Static; entry cannot be changed by learned information. This indicates that the
 \fBpermanent\fR flag was used when creating the entry.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBU\fR\fR
 .ad
 .RS 5n
-.rt  
 Unresolved; waiting for ARP response.
 .RE
 
@@ -195,12 +175,10 @@ option is equivalent to:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 6n
-.rt  
 Delete an entry for the host called \fIhostname\fR.
 .sp
 Note that ARP entries for IPMP (IP Network Multipathing) data and test
@@ -209,12 +187,10 @@ addresses are managed by the kernel and thus cannot be deleted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 6n
-.rt  
 Read the file named \fIfilename\fR and set multiple entries in the \fBARP\fR
 tables. Entries in the file should be of the form:
 .sp
@@ -230,12 +206,10 @@ See the \fB-s\fR option for argument definitions.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 6n
-.rt  
 Create an \fBARP\fR entry for the host called \fIhostname\fR with the MAC
 address \fIMACaddress\fR. For example, an Ethernet address is given as six
 hexadecimal bytes separated by colons. The entry will not be subject to
diff --git a/usr/src/man/man1m/atohexlabel.1m b/usr/src/man/man1m/atohexlabel.1m
index ff1f6a3990..092f72d481 100644
--- a/usr/src/man/man1m/atohexlabel.1m
+++ b/usr/src/man/man1m/atohexlabel.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH atohexlabel 1M "20 Jul 2007" "SunOS 5.11" "System Administration Commands"
+.TH ATOHEXLABEL 1M "Jul 20, 2007"
 .SH NAME
 atohexlabel \- convert a human readable label to its internal text equivalent
 .SH SYNOPSIS
@@ -33,12 +33,10 @@ of labels that are stored in internal databases.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 6n
-.rt  
 Identifies the human readable label as a clearance.
 .RE
 
@@ -48,30 +46,25 @@ Identifies the human readable label as a clearance.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 13n
-.rt  
 On success.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 13n
-.rt  
 On failure, and writes diagnostics to the standard error file.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/tsol/label_encodings\fR\fR
 .ad
@@ -89,13 +82,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/audit.1m b/usr/src/man/man1m/audit.1m
index 51f9069f12..5406331337 100644
--- a/usr/src/man/man1m/audit.1m
+++ b/usr/src/man/man1m/audit.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH audit 1M "16 Apr 2008" "SunOS 5.11" "System Administration Commands"
+.TH AUDIT 1M "Apr 16, 2008"
 .SH NAME
 audit \- control the behavior of the audit daemon
 .SH SYNOPSIS
@@ -27,24 +27,20 @@ trail and disable auditing.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 11n
-.rt  
 Notify the audit daemon to close the current audit file and open a new audit
 file in the current audit directory.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 11n
-.rt  
 Notify the audit daemon to read the audit control file. The audit daemon stores
 the information internally. If the audit daemon is not running but audit has
 been enabled by means of \fBbsmconv\fR(1M), the audit daemon is started.
@@ -52,24 +48,20 @@ been enabled by means of \fBbsmconv\fR(1M), the audit daemon is started.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
 .RS 11n
-.rt  
 Direct the audit daemon to close the current audit trail file, disable
 auditing, and die. Use \fB-s\fR to restart auditing.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR \fIpath\fR\fR
 .ad
 .RS 11n
-.rt  
 Verify the syntax for the audit control file stored in \fIpath\fR. The
 \fBaudit\fR command displays an approval message or outputs specific error
 messages for each error found.
@@ -101,13 +93,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-StabilityEvolving
+Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/audit_warn.1m b/usr/src/man/man1m/audit_warn.1m
index 19ceabe96f..4106e3d928 100644
--- a/usr/src/man/man1m/audit_warn.1m
+++ b/usr/src/man/man1m/audit_warn.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH audit_warn 1M "16 Apr 2008" "SunOS 5.11" "System Administration Commands"
+.TH AUDIT_WARN 1M "Apr 16, 2008"
 .SH NAME
 audit_warn \- audit daemon warning script
 .SH SYNOPSIS
@@ -31,7 +31,6 @@ when an audit_warn situation arises by defining a mail alias called
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBallhard\fR \fIcount\fR\fR
 .ad
@@ -47,7 +46,6 @@ file system that contains the mail spool directory.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBallsoft\fR\fR
 .ad
@@ -60,7 +58,6 @@ and to write a message to the machine console.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBauditoff\fR\fR
 .ad
@@ -75,7 +72,6 @@ console.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBebusy\fR\fR
 .ad
@@ -88,7 +84,6 @@ the machine console.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgetacdir\fR \fIcount\fR\fR
 .ad
@@ -105,7 +100,6 @@ that contains the mail spool directory.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhard\fR \fIfilename\fR\fR
 .ad
@@ -118,7 +112,6 @@ write a message to the machine console.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnostart\fR\fR
 .ad
@@ -132,7 +125,6 @@ to reboot the system when this error occurs.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBplugin\fR \fIname\fR \fIerror\fR \fIcount\fR \fItext\fR\fR
 .ad
@@ -148,35 +140,29 @@ saturation of the file system that contains the mail spool directory. The
 The \fIerror\fR field is one of the following strings:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBload_error\fR\fR
 .ad
 .RS 16n
-.rt  
 Unable to load the plugin \fIname\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsys_error\fR\fR
 .ad
 .RS 16n
-.rt  
 The plugin \fIname\fR is not executing due to a system error such as a lack of
 resources.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconfig_error\fR\fR
 .ad
 .RS 16n
-.rt  
 No plugins loaded (including the binary file plugin, \fBaudit_binfile\fR(5))
 due to configuration errors in \fBaudit_control\fR(4). The name string is
 \fB--\fR to indicate that no plugin name applies.
@@ -184,12 +170,10 @@ due to configuration errors in \fBaudit_control\fR(4). The name string is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBretry\fR\fR
 .ad
 .RS 16n
-.rt  
 The plugin \fIname\fR reports it has encountered a temporary failure. For
 example, the \fBaudit_binfree.so\fR plugin uses \fBretry\fR to indicate that
 all directories are full.
@@ -197,34 +181,28 @@ all directories are full.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBno_memory\fR\fR
 .ad
 .RS 16n
-.rt  
 The plugin \fIname\fR reports a failure due to lack of memory.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinvalid\fR\fR
 .ad
 .RS 16n
-.rt  
 The plugin \fIname\fR reports it received an invalid input.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfailure\fR\fR
 .ad
 .RS 16n
-.rt  
 The plugin \fIname\fR has reported an error as described in \fItext\fR.
 .RE
 
@@ -232,7 +210,6 @@ The plugin \fIname\fR has reported an error as described in \fItext\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpostsigterm\fR\fR
 .ad
@@ -245,7 +222,6 @@ daemon. The default action for this option is to send mail to the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsoft\fR \fIfilename\fR\fR
 .ad
@@ -258,7 +234,6 @@ write a message to the machine console.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtmpfile\fR\fR
 .ad
@@ -277,13 +252,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/auditconfig.1m b/usr/src/man/man1m/auditconfig.1m
index 4e01d82e73..4dddd420c3 100644
--- a/usr/src/man/man1m/auditconfig.1m
+++ b/usr/src/man/man1m/auditconfig.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH auditconfig 1M "14 Sep 2009" "SunOS 5.11" "System Administration Commands"
+.TH AUDITCONFIG 1M "Sep 14, 2009"
 .SH NAME
 auditconfig \- configure auditing
 .SH SYNOPSIS
@@ -38,7 +38,6 @@ administrator. \fBperzone\fR and \fBahlt\fR are described under the
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-aconf\fR\fR
 .ad
@@ -59,7 +58,6 @@ Configured non-attributable events.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-audit\fR \fIevent\fR \fIsorf\fR \fIretval\fR \fIstring\fR\fR
 .ad
@@ -91,7 +89,6 @@ audit record from audit trail:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-chkaconf\fR\fR
 .ad
@@ -105,7 +102,6 @@ reported.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-chkconf\fR\fR
 .ad
@@ -118,7 +114,6 @@ mismatch is reported.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-conf\fR\fR
 .ad
@@ -130,7 +125,6 @@ changed to match those in the audit event to class database file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-getasid\fR\fR
 .ad
@@ -150,7 +144,6 @@ audit session id = 102336
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-getaudit\fR\fR
 .ad
@@ -173,7 +166,6 @@ audit session id = 102336
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-getauid\fR\fR
 .ad
@@ -193,7 +185,6 @@ audit id = abc(666)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-getcar\fR\fR
 .ad
@@ -214,7 +205,6 @@ current active root = /
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-getclass\fR \fIevent\fR\fR
 .ad
@@ -226,7 +216,6 @@ Display the preselection mask associated with the specified kernel audit event.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-getcond\fR\fR
 .ad
@@ -243,7 +232,6 @@ records. See \fBauditon\fR(2) and \fBauditd\fR(1M) for further information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-getestate\fR \fIevent\fR\fR
 .ad
@@ -266,7 +254,6 @@ audit class mask for event AUE_RENAME(42) = 0x30
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-getkaudit\fR\fR
 .ad
@@ -291,7 +278,6 @@ global zone. Otherwise, it is the terminal id of the local zone.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-getkmask\fR\fR
 .ad
@@ -313,7 +299,6 @@ global zone. Otherwise, it is that of the local zone.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-getpinfo\fR \fIpid\fR\fR
 .ad
@@ -325,7 +310,6 @@ the specified process.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-getpolicy\fR\fR
 .ad
@@ -339,7 +323,6 @@ policies are machine-wide.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-getcwd\fR\fR
 .ad
@@ -361,7 +344,6 @@ current working directory = /var/tmp
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-getqbufsz\fR\fR
 .ad
@@ -381,7 +363,6 @@ Get audit queue write buffer size. For example:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-getqctrl\fR\fR
 .ad
@@ -405,7 +386,6 @@ audit queue delay (ticks) = 20
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-getqdelay\fR\fR
 .ad
@@ -425,7 +405,6 @@ audit queue delay (ticks) = 20
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-getqhiwater\fR\fR
 .ad
@@ -446,7 +425,6 @@ audit queue hiwater mark (records) = 100
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-getqlowater\fR\fR
 .ad
@@ -467,7 +445,6 @@ audit queue lowater mark (records) = 10
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-getstat\fR\fR
 .ad
@@ -490,7 +467,6 @@ output.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-gettid\fR\fR
 .ad
@@ -510,7 +486,6 @@ terminal id (maj,min,host) = 235,197121,elbow(172.146.89.77)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-lsevent\fR\fR
 .ad
@@ -522,7 +497,6 @@ information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-lspolicy\fR\fR
 .ad
@@ -533,7 +507,6 @@ Display the kernel audit policies with a description of each policy.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-setasid\fR \fIsession-ID\fR [\fIcmd\fR]\fR
 .ad
@@ -558,7 +531,6 @@ audit session id = 2000
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-setaudit\fR \fIaudit-ID\fR \fIpreselect_flags\fR \fIterm-ID\fR
 \fIsession-ID\fR [\fIcmd\fR]\fR
@@ -570,7 +542,6 @@ Execute shell or \fIcmd\fR with the specified audit characteristics.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-setauid\fR \fIaudit-ID\fR [\fIcmd\fR]\fR
 .ad
@@ -581,7 +552,6 @@ Execute shell or \fIcmd\fR with the specified \fIaudit-ID\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-setclass\fR \fIevent audit_flag\fR[\fI,audit_flag .\|.\|.\fR]\fR
 .ad
@@ -596,7 +566,6 @@ global zone.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-setkaudit\fR \fIIP-address_type\fR \fIIP_address\fR\fR
 .ad
@@ -610,7 +579,6 @@ If \fBperzone\fR is not set, this option is valid only in the global zone.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-setkmask\fR \fIaudit_flags\fR\fR
 .ad
@@ -623,7 +591,6 @@ If \fBperzone\fR is not set, this option is valid only in the global zone.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-setpmask\fR \fIpid flags\fR\fR
 .ad
@@ -637,7 +604,6 @@ If \fBperzone\fR is not set, this option is valid only in the global zone.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-setpolicy\fR
 [\fI+\fR|\fI-\fR]\fIpolicy_flag\fR[\fI,policy_flag ...\fR]\fR
@@ -653,23 +619,19 @@ valid policy flag strings (\fBauditconfig\fR \fB-lspolicy\fR also lists the
 current valid audit policy flag strings):
 .sp
 .ne 2
-.mk
 .na
 \fB\fBall\fR\fR
 .ad
 .RS 16n
-.rt  
 Include all policies that apply to the current zone.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBahlt\fR\fR
 .ad
 .RS 16n
-.rt  
 Panic is called and the system dumps core if an asynchronous audit event occurs
 that cannot be delivered because the audit queue has reached the high-water
 mark or because there are insufficient resources to construct an audit record.
@@ -679,36 +641,30 @@ records.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBarge\fR\fR
 .ad
 .RS 16n
-.rt  
 Include the \fBexecv\fR(2) system call environment arguments to the audit
 record. This information is not included by default.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBargv\fR\fR
 .ad
 .RS 16n
-.rt  
 Include the \fBexecv\fR(2) system call parameter arguments to the audit record.
 This information is not included by default.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcnt\fR\fR
 .ad
 .RS 16n
-.rt  
 Do not suspend processes when audit resources are exhausted. Instead, drop
 audit records and keep a count of the number of records dropped. By default,
 process are suspended until audit resources become available.
@@ -716,36 +672,30 @@ process are suspended until audit resources become available.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgroup\fR\fR
 .ad
 .RS 16n
-.rt  
 Include the supplementary group token in audit records. By default, the group
 token is not included.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnone\fR\fR
 .ad
 .RS 16n
-.rt  
 Include no policies. If used in other than the global zone, the \fBahlt\fR and
 \fBperzone\fR policies are not changed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpath\fR\fR
 .ad
 .RS 16n
-.rt  
 Add secondary path tokens to audit record. These are typically the pathnames of
 dynamically linked shared libraries or command interpreters for shell scripts.
 By default, they are not included.
@@ -753,24 +703,20 @@ By default, they are not included.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBperzone\fR\fR
 .ad
 .RS 16n
-.rt  
 Maintain separate configuration, queues, and logs for each zone and execute a
 separate version of \fBauditd\fR(1M) for each zone.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpublic\fR\fR
 .ad
 .RS 16n
-.rt  
 Audit public files. By default, read-type operations are not audited for
 certain files which meet \fBpublic\fR characteristics: owned by root, readable
 by all, and not writable by all.
@@ -778,24 +724,20 @@ by all, and not writable by all.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtrail\fR\fR
 .ad
 .RS 16n
-.rt  
 Include the trailer token in every audit record. By default, the trailer token
 is not included.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBseq\fR\fR
 .ad
 .RS 16n
-.rt  
 Include the sequence token as part of every audit record. By default, the
 sequence token is not included. The sequence token attaches a sequence number
 to every audit record.
@@ -803,12 +745,10 @@ to every audit record.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwindata_down\fR\fR
 .ad
 .RS 16n
-.rt  
 Include in an audit record any downgraded data moved between windows. This
 policy is available only if the system is configured with Trusted Extensions.
 By default, this information is not included.
@@ -816,12 +756,10 @@ By default, this information is not included.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwindata_up\fR\fR
 .ad
 .RS 16n
-.rt  
 Include in an audit record any upgraded data moved between windows. This policy
 is available only if the system is configured with Trusted Extensions. By
 default, this information is not included.
@@ -829,12 +767,10 @@ default, this information is not included.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzonename\fR\fR
 .ad
 .RS 16n
-.rt  
 Include the \fBzonename\fR token as part of every audit record. By default, the
 \fBzonename\fR token is not included. The \fBzonename\fR token gives the name
 of the zone from which the audit record was generated.
@@ -844,7 +780,6 @@ of the zone from which the audit record was generated.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-setqbufsz\fR \fIbuffer_size\fR\fR
 .ad
@@ -855,7 +790,6 @@ Set the audit queue write buffer size (bytes).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-setqctrl\fR \fIhiwater\fR \fIlowater\fR \fIbufsz\fR \fIinterval\fR\fR
 .ad
@@ -868,7 +802,6 @@ zone only if \fBperzone\fR is set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-setqdelay\fR \fIinterval\fR\fR
 .ad
@@ -881,7 +814,6 @@ trail. Valid within a local zone only if \fBperzone\fR is set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-setqhiwater\fR \fIhiwater\fR\fR
 .ad
@@ -894,7 +826,6 @@ set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-setqlowater\fR \fIlowater\fR\fR
 .ad
@@ -907,7 +838,6 @@ set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-setsmask\fR \fIasid flags\fR\fR
 .ad
@@ -919,7 +849,6 @@ Valid within a local zone only if \fBperzone\fR is set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-setstat\fR\fR
 .ad
@@ -931,7 +860,6 @@ Reset audit statistics counters. Valid within a local zone only if
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-setumask\fR \fIauid flags\fR\fR
 .ad
@@ -967,46 +895,38 @@ The following is an example of an \fBauditconfig\fR program:
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/audit_event\fR\fR
 .ad
 .RS 29n
-.rt  
 Stores event definitions used in the audit system.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/audit_class\fR\fR
 .ad
 .RS 29n
-.rt  
 Stores class definitions used in the audit system.
 .RE
 
@@ -1018,13 +938,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/auditd.1m b/usr/src/man/man1m/auditd.1m
index ed87579480..7d2e7c3d89 100644
--- a/usr/src/man/man1m/auditd.1m
+++ b/usr/src/man/man1m/auditd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH auditd 1M "29 Apr 2008" "SunOS 5.11" "System Administration Commands"
+.TH AUDITD 1M "Apr 29, 2008"
 .SH NAME
 auditd \- audit daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/auditd\fR 
+\fB/usr/sbin/auditd\fR
 .fi
 
 .SH DESCRIPTION
@@ -74,7 +74,6 @@ The audit daemon invokes the program \fBaudit_warn\fR(1M) under the following
 conditions with the indicated options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaudit_warn soft\fR \fIpathname\fR\fR
 .ad
@@ -87,7 +86,6 @@ opened on another file system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaudit_warn allsoft\fR\fR
 .ad
@@ -99,7 +97,6 @@ limit. A new audit trail has been opened anyway.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaudit_warn hard\fR \fIpathname\fR\fR
 .ad
@@ -111,7 +108,6 @@ become unavailable. A new audit trail has been opened on another file system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaudit_warn allhard\fR \fIcount\fR\fR
 .ad
@@ -126,7 +122,6 @@ arose.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaudit_warn ebusy\fR\fR
 .ad
@@ -137,7 +132,6 @@ There is already an audit daemon running.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaudit_warn tmpfile\fR\fR
 .ad
@@ -148,7 +142,6 @@ The file \fB/etc/security/audit/audit_tmp\fR exists, indicating a fatal error.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaudit_warn nostart\fR\fR
 .ad
@@ -160,7 +153,6 @@ started without rebooting the system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaudit_warn auditoff\fR\fR
 .ad
@@ -173,7 +165,6 @@ audit daemon to exit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaudit_warn postsigterm\fR\fR
 .ad
@@ -184,7 +175,6 @@ An error occurred during the orderly shutdown of the auditing system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaudit_warn getacdir\fR\fR
 .ad
@@ -208,13 +198,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/auditrecord.1m b/usr/src/man/man1m/auditrecord.1m
index c8a0a3a371..1ae35b5809 100644
--- a/usr/src/man/man1m/auditrecord.1m
+++ b/usr/src/man/man1m/auditrecord.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH auditrecord 1M "13 May 2009" "SunOS 5.11" "System Administration Commands"
+.TH AUDITRECORD 1M "May 13, 2009"
 .SH NAME
 auditrecord \- display Solaris audit record formats
 .SH SYNOPSIS
@@ -36,7 +36,6 @@ present in every record.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -47,7 +46,6 @@ List all audit records.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIclass\fR\fR
 .ad
@@ -59,7 +57,6 @@ two-character class codes from the file \fB/etc/security/audit_class\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -73,7 +70,6 @@ format information available to \fBauditrecord\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIstring\fR\fR
 .ad
@@ -85,7 +81,6 @@ List all audit records for which the event ID label contains the string
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -96,7 +91,6 @@ Generate the output in HTML format.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIid\fR\fR
 .ad
@@ -107,7 +101,6 @@ List the audit records having the numeric event ID \fIid\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIprogramname\fR\fR
 .ad
@@ -119,7 +112,6 @@ audit records generated by a user-space program.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsystemcall\fR\fR
 .ad
@@ -197,7 +189,6 @@ rlogin
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -208,7 +199,6 @@ Successful operation
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnon-zero\fR\fR
 .ad
@@ -220,7 +210,6 @@ Error
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/audit_class\fR\fR
 .ad
@@ -231,7 +220,6 @@ Provides the list of valid classes and the associated audit mask.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/audit_event\fR\fR
 .ad
@@ -249,15 +237,14 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-CSIEnabled
+CSI	Enabled
 _
-Interface StabilityObsolete Uncommitted
+Interface Stability	Obsolete Uncommitted
 .TE
 
 .SH SEE ALSO
@@ -301,7 +288,6 @@ The following is a list of \fBpraudit\fR(1M) token names with their
 descriptions.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgroup\fR\fR
 .ad
@@ -312,7 +298,6 @@ Present if the \fBgroup\fR audit policy is set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsensitivity label\fR\fR
 .ad
@@ -326,7 +311,6 @@ record.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsequence\fR\fR
 .ad
@@ -337,7 +321,6 @@ Present when the \fBseq\fR audit policy is set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtrailer\fR\fR
 .ad
@@ -348,7 +331,6 @@ Present when the \fBtrail\fR audit policy is set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzone\fR\fR
 .ad
diff --git a/usr/src/man/man1m/auditreduce.1m b/usr/src/man/man1m/auditreduce.1m
index 8112a33f1a..d7b854ee1b 100644
--- a/usr/src/man/man1m/auditreduce.1m
+++ b/usr/src/man/man1m/auditreduce.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH auditreduce 1M "10 Apr 2006" "SunOS 5.11" "System Administration Commands"
+.TH AUDITREDUCE 1M "Apr 10, 2006"
 .SH NAME
 auditreduce \- merge and select audit records from audit trail files
 .SH SYNOPSIS
@@ -72,7 +72,6 @@ The file selection options indicate which files are to be processed and certain
 types of special treatment.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR\fR
 .ad
@@ -88,7 +87,6 @@ then \fB-A\fR will not override that.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR\fR
 .ad
@@ -103,7 +101,6 @@ not apply to files specified on the command line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR \fIsuffix\fR\fR
 .ad
@@ -122,7 +119,6 @@ associated with the latter specification is in effect.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR \fImachine\fR\fR
 .ad
@@ -137,7 +133,6 @@ contain combined records from many machines and have a common suffix (such as
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-N\fR\fR
 .ad
@@ -153,7 +148,6 @@ to select objects, the \fB-o\fR option must be used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-O\fR \fIsuffix\fR\fR
 .ad
@@ -171,7 +165,6 @@ uses the times of the first and last records in the merge as the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Q\fR\fR
 .ad
@@ -182,7 +175,6 @@ Quiet. Suppress notification about errors with input files.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIpathname\fR\fR
 .ad
@@ -205,7 +197,6 @@ zone's file system. See \fBzones\fR(5).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR \fIserver\fR\fR
 .ad
@@ -224,7 +215,6 @@ directory structure like that of \fB/etc/security/audit\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
@@ -244,7 +234,6 @@ are written to the output file produced by \fBauditreduce\fR.
 Multiple arguments of the same type are not permitted.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIdate-time\fR\fR
 .ad
@@ -258,7 +247,6 @@ range.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR \fIdate-time\fR\fR
 .ad
@@ -269,7 +257,6 @@ Select records that occurred before \fIdate-time\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIaudit-classes\fR\fR
 .ad
@@ -285,7 +272,6 @@ records based upon success and failure criteria.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdate-time\fR\fR
 .ad
@@ -301,7 +287,6 @@ with \fB-a\fR or \fB\fR\fB-b\fR\fB\&.\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIeffective-user\fR\fR
 .ad
@@ -312,7 +297,6 @@ Select records with the specified \fIeffective-user.\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIeffective-group\fR\fR
 .ad
@@ -323,7 +307,6 @@ Select records with the specified \fIeffective-group.\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR \fIreal-group\fR\fR
 .ad
@@ -334,7 +317,6 @@ Select records with the specified \fIreal-group.\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-j\fR \fIsubject-ID\fR\fR
 .ad
@@ -346,7 +328,6 @@ process ID.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlabel\fR\fR
 .ad
@@ -359,7 +340,6 @@ configured with Trusted Extensions.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fIevent\fR\fR
 .ad
@@ -371,7 +351,6 @@ string or the \fIevent\fR number.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIobject_type=objectID_value\fR\fR
 .ad
@@ -383,7 +362,6 @@ the value specified by \fIobjectID_value.\fR The allowable object types and
 values are as follows:
 .sp
 .ne 2
-.mk
 .na
 \fBfile=\fIpathname\fR\fR
 .ad
@@ -406,7 +384,6 @@ prevent the shell from expanding any tildes.
 
 .sp
 .ne 2
-.mk
 .na
 \fBfilegroup\fI=group\fR\fR
 .ad
@@ -418,7 +395,6 @@ group.
 
 .sp
 .ne 2
-.mk
 .na
 \fBfileowner=\fIuser\fR\fR
 .ad
@@ -430,7 +406,6 @@ user.
 
 .sp
 .ne 2
-.mk
 .na
 \fBmsgqid=\fIID\fR\fR
 .ad
@@ -442,7 +417,6 @@ where \fIID\fR is a message queue \fBID\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBmsgqgroup=\fIgroup\fR\fR
 .ad
@@ -454,7 +428,6 @@ or creating group.
 
 .sp
 .ne 2
-.mk
 .na
 \fBmsgqowner=\fIuser\fR\fR
 .ad
@@ -466,7 +439,6 @@ or creating user.
 
 .sp
 .ne 2
-.mk
 .na
 \fBpid=\fIID\fR\fR
 .ad
@@ -479,7 +451,6 @@ signals.
 
 .sp
 .ne 2
-.mk
 .na
 \fBprocgroup=\fIgroup\fR\fR
 .ad
@@ -491,7 +462,6 @@ effective group.
 
 .sp
 .ne 2
-.mk
 .na
 \fBprocowner=\fIuser\fR\fR
 .ad
@@ -503,7 +473,6 @@ effective user.
 
 .sp
 .ne 2
-.mk
 .na
 \fBsemid=\fIID\fR\fR
 .ad
@@ -515,7 +484,6 @@ Select records containing semaphore objects with the specified \fIID\fR where
 
 .sp
 .ne 2
-.mk
 .na
 \fBsemgroup=\fIgroup\fR\fR
 .ad
@@ -527,7 +495,6 @@ creating group.
 
 .sp
 .ne 2
-.mk
 .na
 \fBsemowner=\fIuser\fR\fR
 .ad
@@ -539,7 +506,6 @@ creating user.
 
 .sp
 .ne 2
-.mk
 .na
 \fBshmid=\fIID\fR\fR
 .ad
@@ -551,7 +517,6 @@ where \fIID\fR is a shared memory \fBID\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBshmgroup=\fIgroup\fR\fR
 .ad
@@ -563,7 +528,6 @@ or creating group.
 
 .sp
 .ne 2
-.mk
 .na
 \fBshmowner=\fIuser\fR\fR
 .ad
@@ -575,7 +539,6 @@ or creating user.
 
 .sp
 .ne 2
-.mk
 .na
 \fBsock=\fIport_number|machine\fR\fR
 .ad
@@ -588,7 +551,6 @@ in \fBhosts\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fBfmri=\fIservice instance\fR\fR
 .ad
@@ -602,7 +564,6 @@ with the specified \fIservice instance\fR. See \fBsmf\fR(5).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIreal-user\fR\fR
 .ad
@@ -613,7 +574,6 @@ Select records with the specified \fIreal-user\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsession-id\fR\fR
 .ad
@@ -624,7 +584,6 @@ Select audit records with the specified \fIsession-id\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIaudit-user\fR\fR
 .ad
@@ -635,7 +594,6 @@ Select records with the specified \fIaudit-user\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-z\fR \fIzone-name\fR\fR
 .ad
@@ -655,7 +613,6 @@ input is taken from the standard input.
 .SS "Option Arguments"
 .sp
 .ne 2
-.mk
 .na
 \fB\fIaudit-trail-file\fR\fR
 .ad
@@ -680,7 +637,6 @@ trail file contains a combined group of records from many machines).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdate-time\fR\fR
 .ad
@@ -705,7 +661,6 @@ relative to the starting time. Thus, this form can only be used with the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIevent\fR\fR
 .ad
@@ -718,7 +673,6 @@ invalid.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIgroup\fR\fR
 .ad
@@ -731,7 +685,6 @@ The literal string or ordinal group ID number as found in \fBgroup\fR(4). If
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIlabel\fR\fR
 .ad
@@ -747,7 +700,6 @@ used when specifying a range.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpathname\fR\fR
 .ad
@@ -758,7 +710,6 @@ A regular expression describing a pathname.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIuser\fR\fR
 .ad
@@ -908,7 +859,6 @@ To get an audit log of only the global zone:
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/audit/\fR\fIserver\fR\fB/files/*\fR\fR
 .ad
@@ -925,13 +875,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/auditstat.1m b/usr/src/man/man1m/auditstat.1m
index 661d1229be..288dfc9941 100644
--- a/usr/src/man/man1m/auditstat.1m
+++ b/usr/src/man/man1m/auditstat.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH auditstat 1M "16 Jun 2009" "SunOS 5.11" "System Administration Commands"
+.TH AUDITSTAT 1M "Jun 16, 2009"
 .SH NAME
 auditstat \- display kernel audit statistics
 .SH SYNOPSIS
@@ -20,34 +20,28 @@ auditstat \- display kernel audit statistics
 follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaud\fR\fR
 .ad
 .RS 8n
-.rt  
 The total number of audit records processed by the \fBaudit\fR(2) system call.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBctl\fR\fR
 .ad
 .RS 8n
-.rt  
 This field is obsolete.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdrop\fR\fR
 .ad
 .RS 8n
-.rt  
 The total number of audit records that have been dropped. Records are dropped
 according to the kernel audit policy. See \fBauditon\fR(2), \fBAUDIT_CNT\fR
 policy for details.
@@ -55,106 +49,88 @@ policy for details.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBenq\fR\fR
 .ad
 .RS 8n
-.rt  
 The total number of audit records put on the kernel audit queue.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgen\fR\fR
 .ad
 .RS 8n
-.rt  
 The total number of audit records that have been constructed (not the number
 written).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBkern\fR\fR
 .ad
 .RS 8n
-.rt  
 The total number of audit records produced by user processes (as a result of
 system calls).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmem\fR\fR
 .ad
 .RS 8n
-.rt  
 The total number of Kbytes of memory currently in use by the kernel audit
 module.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnona\fR\fR
 .ad
 .RS 8n
-.rt  
 The total number of non-attributable audit records that have been constructed.
 These are audit records that are not attributable to any particular user.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrblk\fR\fR
 .ad
 .RS 8n
-.rt  
 The total number of times that the audit queue has blocked waiting to process
 audit data.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtot\fR\fR
 .ad
 .RS 8n
-.rt  
 The total number of Kbytes of audit data written to the audit trail.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwblk\fR\fR
 .ad
 .RS 8n
-.rt  
 The total number of times that user processes blocked on the audit queue at the
 high water mark.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwrtn\fR\fR
 .ad
 .RS 8n
-.rt  
 The total number of audit records written. The difference between \fBenq\fR and
 \fBwrtn\fR is the number of outstanding audit records on the audit queue that
 have not been written.
@@ -163,24 +139,20 @@ have not been written.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcount\fR\fR
 .ad
 .RS 15n
-.rt  
 Display the statistics a total of \fIcount\fR times. If \fIcount\fR is equal to
 zero, statistics are displayed indefinitely. A time interval must be specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fInumlines\fR\fR
 .ad
 .RS 15n
-.rt  
 Display a header for every \fInumlines\fR of statistics printed. The default is
 to display the header every 20 lines. If \fInumlines\fR is equal to zero, the
 header is never displayed.
@@ -188,35 +160,29 @@ header is never displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIinterval\fR\fR
 .ad
 .RS 15n
-.rt  
 Display the statistics every \fIinterval\fR where \fIinterval\fR is the number
 of seconds to sleep between each collection.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 15n
-.rt  
 Display the number of kernel audit events currently configured.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fBu\fR | \fBd\fR\fR
 .ad
 .RS 15n
-.rt  
 Display a time stamp.
 .sp
 Specify \fBu\fR for a printed representation of the internal representation of
@@ -226,12 +192,10 @@ time. See \fBtime\fR(2). Specify \fBd\fR for standard date format. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 15n
-.rt  
 Display the version number of the kernel audit module software.
 .RE
 
diff --git a/usr/src/man/man1m/automount.1m b/usr/src/man/man1m/automount.1m
index 067eb157ea..ccae4f8718 100644
--- a/usr/src/man/man1m/automount.1m
+++ b/usr/src/man/man1m/automount.1m
@@ -1,10 +1,10 @@
 '\" te
-.\" Copyright 1989 AT&T 
+.\" Copyright 1989 AT&T
 .\" Copyright (c) 2008, Sun Microsystems, Inc. All Rights Reserved
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH automount 1M "28 Mar 2008" "SunOS 5.11" "System Administration Commands"
+.TH AUTOMOUNT 1M "Mar 28, 2008"
 .SH NAME
 automount \- install automatic mount points
 .SH SYNOPSIS
@@ -104,24 +104,20 @@ directory is automatically created on behalf of the user.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fIduration\fR\fR
 .ad
 .RS 15n
-.rt  
 Specifies a \fIduration\fR, in seconds, that a file system is to remain mounted
 when not in use. The default is \fB10\fR minutes.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 15n
-.rt  
 Verbose mode. Notifies of \fBautofs\fR mounts, unmounts, or other non-essential
 information.
 .RE
@@ -234,7 +230,7 @@ still be applied. For example:
 .sp
 .in +2
 .nf
-man -ro alpha:/usr/man  bravo,charlie(1):/usr/share/man  
+man -ro alpha:/usr/man  bravo,charlie(1):/usr/share/man
      delta(3):/export/man
 .fi
 .in -2
@@ -302,35 +298,33 @@ to its current value for the client's host name. Supported variables are:
 
 .sp
 .TS
-tab();
-lw(1.07i) lw(2.6i) lw(1.83i) 
-lw(1.07i) lw(2.6i) lw(1.83i) 
-.
-\fBARCH\fRThe output of \fBarch\fRT{
+l l l
+l l l .
+\fBARCH\fR	The output of \fBarch\fR	T{
 The architecture name. For example, \fBsun4\fR on a sun4u machine.
 T}
-\fBCPU\fRThe output of \fBuname\fR \fB-p\fRThe processor type.
-For example, "sparc"
-\fBHOST\fRThe output of \fBuname\fR \fB-n\fRThe host name.
-For example, \fBmyhost\fR.
-\fBKARCH\fRThe output of \fBarch -k\fR or \fBuname -m\fRT{
+\fBCPU\fR	The output of \fBuname\fR \fB-p\fR	The processor type.
+		For example, "sparc"
+\fBHOST\fR	The output of \fBuname\fR \fB-n\fR	The host name.
+		For example, \fBmyhost\fR.
+\fBKARCH\fR	The output of \fBarch -k\fR or \fBuname -m\fR	T{
 The kernel architecture name or machine hardware name. For example, \fBsun4u\fR.
 T}
-
-\fBOSNAME\fRThe output of \fBuname\fR \fB-s\fRThe OS name.
-For example, "SunOS"
-\fBOSREL\fRThe output of \fBuname\fR \fB-r\fRThe OS release name. 
-For example "5.3"
-\fBOSVERS\fRThe output of \fBuname\fR \fB-v\fRThe OS version.
-For example, "beta1.0"
-\fBNATISA\fRThe output of \fBisainfo\fR \fB-n\fRT{
+		
+\fBOSNAME\fR	The output of \fBuname\fR \fB-s\fR	The OS name.
+		For example, "SunOS"
+\fBOSREL\fR	The output of \fBuname\fR \fB-r\fR	The OS release name.
+		For example "5.3"
+\fBOSVERS\fR	The output of \fBuname\fR \fB-v\fR	The OS version.
+		For example, "beta1.0"
+\fBNATISA\fR	The output of \fBisainfo\fR \fB-n\fR	T{
 The native instruction set architecture for the system.
 T}
-For example, "sparcv9"
-\fBPLATFORM\fRThe output of \fBuname -i\fRT{
+		For example, "sparcv9"
+\fBPLATFORM\fR	The output of \fBuname -i\fR	T{
 The platform name. For example,  \fBSUNW,Sun-Fire-V240\fR.
 T}
-
+		
 .TE
 
 .sp
@@ -579,69 +573,57 @@ available in their zone.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/auto_master\fR\fR
 .ad
 .RS 23n
-.rt  
 Master automount map.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/auto_home\fR\fR
 .ad
 .RS 23n
-.rt  
 Map to support automounted home directories.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/autofs\fR\fR
 .ad
 .RS 23n
-.rt  
 Supplies default values for parameters for \fBautomount\fR and
 \fBautomountd\fR. See \fBautofs\fR(4).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/nsswitch.conf\fR\fR
 .ad
 .RS 23n
-.rt  
 Name service switch configuration file. See \fBnsswitch.conf\fR(4).
 .RE
 
diff --git a/usr/src/man/man1m/automountd.1m b/usr/src/man/man1m/automountd.1m
index b6a168bda8..4ad9d3f4c7 100644
--- a/usr/src/man/man1m/automountd.1m
+++ b/usr/src/man/man1m/automountd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH automountd 1M "3 Mar 2005" "SunOS 5.11" "System Administration Commands"
+.TH AUTOMOUNTD 1M "Mar 3, 2005"
 .SH NAME
 automountd \- autofs mount/unmount daemon
 .SH SYNOPSIS
@@ -37,12 +37,10 @@ At startup, the \fBautomountd\fR daemon is invoked as is invoked as the
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR \fIname=value\fR\fR
 .ad
 .RS 17n
-.rt  
 Assign \fIvalue\fR to the indicated \fBautomount\fR map substitution variable.
 These assignments cannot be used to substitute variables in the master map
 \fBauto_master\fR.
@@ -50,35 +48,29 @@ These assignments cannot be used to substitute variables in the master map
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 17n
-.rt  
 Turn off browsing for all \fBautofs\fR mount points. This option overrides the
 \fB-browse\fR \fBautofs\fR map option on the local host.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR\fR
 .ad
 .RS 17n
-.rt  
 Trace. Expand each \fBRPC\fR call and display it on the standard output.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 17n
-.rt  
 Verbose. Log status messages to the console.
 .RE
 
@@ -90,23 +82,19 @@ when encountering files greater than or equal to 2 Gbyte ( 2^31 bytes).
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/auto_master\fR\fR
 .ad
 .RS 23n
-.rt  
 Master map for automounter.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/autofs\fR\fR
 .ad
 .RS 23n
-.rt  
 Supplies default values for parameters for \fBautomount\fR and
 \fBautomountd\fR. See \fBautofs\fR(4).
 .RE
diff --git a/usr/src/man/man1m/autopush.1m b/usr/src/man/man1m/autopush.1m
index e6ca0c9114..9ead69a11b 100644
--- a/usr/src/man/man1m/autopush.1m
+++ b/usr/src/man/man1m/autopush.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH autopush 1M "15 Feb 2008" "SunOS 5.11" "System Administration Commands"
+.TH AUTOPUSH 1M "Feb 15, 2008"
 .SH NAME
 autopush \- configures lists of automatically pushed STREAMS modules
 .SH SYNOPSIS
@@ -34,7 +34,6 @@ previous setting or get information on a setting.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfilename\fR\fR
 .ad
@@ -75,7 +74,6 @@ file failed to complete successfully.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR\fR
 .ad
@@ -90,7 +88,6 @@ of a range (as described with the \fB-f\fR option).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fIminor\fR\fR
 .ad
@@ -101,7 +98,6 @@ Specifies the minor device number.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR \fImajor\fR\fR
 .ad
@@ -112,7 +108,6 @@ Specifies the major device number.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -132,7 +127,6 @@ removed for the entire range.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB0\fR
 .ad
@@ -143,7 +137,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-zero\fR
 .ad
diff --git a/usr/src/man/man1m/bart.1m b/usr/src/man/man1m/bart.1m
index 1149e794b8..520ab571ed 100644
--- a/usr/src/man/man1m/bart.1m
+++ b/usr/src/man/man1m/bart.1m
@@ -3,25 +3,25 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH bart 1M "26 Oct 2005" "SunOS 5.11" "System Administration Commands"
+.TH BART 1M "Oct 26, 2005"
 .SH NAME
 bart \- basic audit reporting tool
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/bin/bart\fR create [ \fB-n\fR] [\fB-R\fR \fIroot_directory\fR] 
+\fB/usr/bin/bart\fR create [ \fB-n\fR] [\fB-R\fR \fIroot_directory\fR]
      [\fB-r\fR \fIrules_file\fR | -]
 .fi
 
 .LP
 .nf
-\fB/usr/bin/bart\fR create [\fB-n\fR] [\fB-R\fR \fIroot_directory\fR] \fB-I\fR 
+\fB/usr/bin/bart\fR create [\fB-n\fR] [\fB-R\fR \fIroot_directory\fR] \fB-I\fR
      [\fIfile_name\fR]...
 .fi
 
 .LP
 .nf
-\fB/usr/bin/bart\fR compare [\fB-i\fR \fIattribute\fR ] [\fB-p\fR] 
+\fB/usr/bin/bart\fR compare [\fB-i\fR \fIattribute\fR ] [\fB-p\fR]
      [\fB-r\fR \fIrules_file\fR | -] \fIcontrol-manifest\fR \fItest-manifest\fR
 .fi
 
@@ -39,12 +39,10 @@ by means of a rules file, \fBbart_rules\fR. See \fBbart_rules\fR(4).
 The \fBbart\fR utility performs two basic functions:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbart create\fR\fR
 .ad
 .RS 16n
-.rt  
 The manifest generator tool takes a file-level \fBsnapshot\fR of a system. The
 output is a catalog of file attributes referred to as a \fBmanifest\fR. See
 \fBbart_manifest\fR(4).
@@ -67,12 +65,10 @@ since they are HSFS file systems.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbart compare\fR\fR
 .ad
 .RS 16n
-.rt  
 The report tool compares two manifests. The output is a list of per-file
 attribute discrepancies. These discrepancies are the differences between two
 manifests: a control manifest and a test manifest.
@@ -105,12 +101,10 @@ files.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIattribute\fR ...\fR
 .ad
 .RS 21n
-.rt  
 Specify the file attributes to be ignored globally. Specify attributes as a
 comma separated list.
 .sp
@@ -120,48 +114,40 @@ global \fBIGNORE\fR keyword in the rules file. See \fBbart_rules\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR [\fIfile_name\fR...]\fR
 .ad
 .RS 21n
-.rt  
 Specify the input list of files. The file list can be specified at the command
 line or read from standard input.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 21n
-.rt  
 Prevent computation of content signatures for all regular files in the file
 list.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 21n
-.rt  
 Display manifest comparison output in ``programmatic mode,'' which is suitable
 for programmatic parsing. The output is not localized.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrules_file\fR\fR
 .ad
 .RS 21n
-.rt  
 Use \fIrules_file\fR to specify which files and directories to catalog, and to
 define which file attribute discrepancies to flag. If \fIrules_file\fR is
 \fB-\fR, then the rules are read from standard input. See \fBbart_rules\fR(4)
@@ -170,12 +156,10 @@ for the definition of the syntax.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot_directory\fR\fR
 .ad
 .RS 21n
-.rt  
 Specify the root directory for the manifest. All paths specified by the rules,
 and all paths reported in the manifest, are relative to \fIroot_directory\fR.
 .LP
@@ -199,23 +183,19 @@ appearing in subtree and subtree modifier specifications.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcontrol-manifest\fR\fR
 .ad
 .RS 20n
-.rt  
 Specify the manifest created by \fBbart create\fR on the control system.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fItest-manifest\fR\fR
 .ad
 .RS 20n
-.rt  
 Specify the manifest created by \fBbart create\fR on the test system.
 .RE
 
@@ -246,12 +226,10 @@ that is suitable for programmatic manipulation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfilename\fR\fR
 .ad
 .RS 13n
-.rt  
 Name of the file that differs between \fIcontrol-manifest\fR and
 \fItest-manifest\fR. For file names that contain embedded whitespace or newline
 characters, see \fBbart_manifest\fR(4).
@@ -259,12 +237,10 @@ characters, see \fBbart_manifest\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIattribute\fR\fR
 .ad
 .RS 13n
-.rt  
 The name of the file attribute that differs between the manifests that are
 compared. \fIxxxx\fR is the attribute value from \fIcontrol-manifest\fR, and
 \fIyyyy\fR is the attribute value from \fItest-manifest\fR. When discrepancies
@@ -274,35 +250,29 @@ separate line.
 The following attributes are supported:
 .sp
 .ne 2
-.mk
 .na
 \fBacl\fR
 .ad
 .RS 12n
-.rt  
 ACL attributes for the file. For a file with ACL attributes, this field
 contains the output from \fBacltotext()\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBall\fR
 .ad
 .RS 12n
-.rt  
 All attributes.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBcontents\fR
 .ad
 .RS 12n
-.rt  
 Checksum value of the file. This attribute is only specified for regular files.
 If you turn off context checking or if checksums cannot be computed, the value
 of this field is \fB-\fR.
@@ -310,113 +280,93 @@ of this field is \fB-\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBdest\fR
 .ad
 .RS 12n
-.rt  
 Destination of a symbolic link.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBdevnode\fR
 .ad
 .RS 12n
-.rt  
 Value of the device node. This attribute is for character device files and
 block device files only.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBdirmtime\fR
 .ad
 .RS 12n
-.rt  
 Modification time in seconds since 00:00:00 UTC, January 1, 1970 for
 directories.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBgid\fR
 .ad
 .RS 12n
-.rt  
 Numerical group ID of the owner of this entry.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBlnmtime\fR
 .ad
 .RS 12n
-.rt  
 Creation time for links.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBmode\fR
 .ad
 .RS 12n
-.rt  
 Octal number that represents the permissions of the file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBmtime\fR
 .ad
 .RS 12n
-.rt  
 Modification time in seconds since 00:00:00 UTC, January 1, 1970 for files.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBsize\fR
 .ad
 .RS 12n
-.rt  
 File size in bytes.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBtype\fR
 .ad
 .RS 12n
-.rt  
 Type of file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBuid\fR
 .ad
 .RS 12n
-.rt  
 Numerical user ID of the owner of this entry.
 .RE
 
@@ -450,7 +400,6 @@ test:84b2b32c4165887355317207b48a6ec7
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfilename\fR\fR
 .ad
@@ -461,7 +410,6 @@ Same as \fIfilename\fR in the default format.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIattribute\fR \fIcontrol-val\fR \fItest-val\fR\fR
 .ad
@@ -497,34 +445,28 @@ contents daca28ae0de97afd7a6b91fde8d57afa 84b2b32c4165887355317207b48a6ec7
 The manifest generator returns the following exit values:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Success
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 6n
-.rt  
 Non-fatal error when processing files; for example, permission problems
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>1\fR\fR
 .ad
 .RS 6n
-.rt  
 Fatal error; for example, invalid command-line options
 .RE
 
@@ -534,34 +476,28 @@ Fatal error; for example, invalid command-line options
 The report tool returns the following exit values:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 No discrepancies reported
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 6n
-.rt  
 Discrepancies found
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>1\fR\fR
 .ad
 .RS 6n
-.rt  
 Fatal error executing comparison
 .RE
 
@@ -681,13 +617,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/beadm.1m b/usr/src/man/man1m/beadm.1m
index da73f7ee0e..ded01aa60b 100644
--- a/usr/src/man/man1m/beadm.1m
+++ b/usr/src/man/man1m/beadm.1m
@@ -1,6 +1,6 @@
 '\" te
 .\" Copyright 2011 Nexenta Systems, Inc. All rights reserved.
-.TH beadm 1M "26 Feb 2011" "SunOS 5.11" "System Administration Commands"
+.TH BEADM 1M "Feb 26, 2011"
 .SH NAME
 beadm \- utility for managing zfs boot environments
 .SH SYNOPSIS
@@ -40,7 +40,7 @@ beadm \- utility for managing zfs boot environments
 .nf
 \fBbeadm\fR \fBrename\fR \fIbeName\fR \fInewBeName\fR
 .fi
- 
+
 .LP
 .nf
 \fBbeadm\fR \fBactivate\fR \fIbeName\fR
@@ -141,7 +141,6 @@ Roll back a BE to an existing snapshot of a BE.
 .el -
 Display information about your snapshots and datasets.
 .RE
-.RE
 
 .SH SUBCOMMANDS
 The \fBbeadm\fR command has the subcommands and options listed
@@ -149,7 +148,6 @@ below. Also see
 EXAMPLES below.
 .sp
 .ne 2
-.mk
 .na
 \fBbeadm\fR
 .ad
@@ -160,7 +158,6 @@ Displays command usage.
 
 .sp
 .ne 2
-.mk
 .na
 \fBbeadm\fR \fBcreate\fR [\fB-a\fR] [\fB-d\fR \fIdescription\fR]
 [\fB-e\fR \fInon-activeBeName\fR | \fIbeName@snapshot\fR]
@@ -183,7 +180,6 @@ not provided, \fIbeName\fR
 will be used as the title.
 .sp
 .ne 2
-.mk
 .na
 \fB-a\fR
 .ad
@@ -194,7 +190,6 @@ the newly created BE.
 .RE
 .sp
 .ne 2
-.mk
 .na
 \fB-d\fR \fIdescription\fR
 .ad
@@ -204,7 +199,6 @@ Create a new BE with a description associated with it.
 .RE
 .sp
 .ne 2
-.mk
 .na
 \fB-e\fR \fInon-activeBeName\fR
 .ad
@@ -214,7 +208,6 @@ Create a new BE from an existing inactive BE.
 .RE
 .sp
 .ne 2
-.mk
 .na
 \fB-e\fR \fIbeName@snapshot\fR
 .ad
@@ -224,7 +217,6 @@ Create a new BE from an existing snapshot of the BE named beName.
 .RE
 .sp
 .ne 2
-.mk
 .na
 \fB-o\fR \fIproperty=value\fR
 .ad
@@ -238,7 +230,6 @@ the
 .RE
 .sp
 .ne 2
-.mk
 .na
 \fB-p\fR \fIzpool\fR
 .ad
@@ -252,7 +243,6 @@ behavior is to create the new BE in the same pool as as the origin BE.
 
 .sp
 .ne 2
-.mk
 .na
 \fBbeadm\fR \fBcreate\fR \fIbeName@snapshot\fR
 .ad
@@ -263,7 +253,6 @@ Creates a snapshot of the existing BE named beName.
 
 .sp
 .ne 2
-.mk
 .na
 \fBbeadm\fR \fBdestroy\fR [\fB-fF\fR] \fIbeName\fR | \fIbeName@snapshot\fR
 .ad
@@ -278,7 +267,6 @@ this command
 with caution.
 .sp
 .ne 2
-.mk
 .na
 \fB-f\fR
 .ad
@@ -288,7 +276,6 @@ Forcefully unmount the boot environment if it is currently mounted.
 .RE
 .sp
 .ne 2
-.mk
 .na
 \fB-F\fR
 .ad
@@ -301,7 +288,6 @@ environment.
 
 .sp
 .ne 2
-.mk
 .na
 \fBbeadm\fR \fBlist\fR [\fB-a\fR | \fB-ds\fR] [\fB-H\fR] [\fIbeName\fR]
 .ad
@@ -325,7 +311,6 @@ blank if
 the boot environment does not have a uuid.  See the EXAMPLES section.
 .sp
 .ne 2
-.mk
 .na
 \fB-a\fR
 .ad
@@ -336,7 +321,6 @@ subordinate file systems and snapshots.
 .RE
 .sp
 .ne 2
-.mk
 .na
 \fB-d\fR
 .ad
@@ -347,7 +331,6 @@ environment.
 .RE
 .sp
 .ne 2
-.mk
 .na
 \fB-s\fR
 .ad
@@ -357,7 +340,6 @@ Lists information about the snapshots of the boot environment.
 .RE
 .sp
 .ne 2
-.mk
 .na
 \fB-H\fR
 .ad
@@ -370,7 +352,6 @@ separated by a semicolon.
 
 .sp
 .ne 2
-.mk
 .na
 \fBbeadm\fR \fBmount\fR \fIbeName\fR \fImountpoint\fR
 .ad
@@ -382,7 +363,6 @@ already existing empty directory.
 
 .sp
 .ne 2
-.mk
 .na
 \fBbeadm\fR \fBunmount\fR [\fB-f\fR] \fIbeName\fR
 .ad
@@ -391,7 +371,6 @@ already existing empty directory.
 Unmounts the boot environment named beName.
 .sp
 .ne 2
-.mk
 .na
 \fB-f\fR
 .ad
@@ -403,7 +382,6 @@ Forcefully unmount the boot environment even if its currently busy.
 
 .sp
 .ne 2
-.mk
 .na
 \fBbeadm\fR \fBrename\fR \fIbeName\fR \fInewBeName\fR
 .ad
@@ -414,7 +392,6 @@ Renames the boot environment named \fIbeName\fR to \fInewBeName\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBbeadm\fR \fBrollback\fR \fIbeName\fR \fIsnapshot\fR | \fIbeName@snapshot\fR
 .ad
@@ -426,7 +403,6 @@ of the boot environment named \fIbeName@snapshot\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBbeadm\fR \fBactivate\fR \fIbeName\fR
 .ad
@@ -440,10 +416,9 @@ Makes beName the active BE on next reboot.
 The alternate BE location outside rpool/ROOT can be configured
 by modifying the BENAME_STARTS_WITH parameter in /etc/default/be.
 For example: BENAME_STARTS_WITH=rootfs
-.RE
 
 .SH EXAMPLES
-.LP     
+.LP
 \fBExample 1\fR: Create a new BE named BE1, by cloning the current live BE.
 .sp
 .in +2
@@ -508,7 +483,7 @@ on.
 .fi
 .in -2
 .sp
-    
+
 .LP
 \fBExample 7\fR: Create a new BE named BE6 based on the currently running BE
 and provide a description for it.
@@ -647,8 +622,8 @@ BE5
 .nf
 \fB# beadm list -a BE5\fR
 
-BE/Dataset/Snapshot   Active Mountpoint Space   Policy Created          
--------------------   ------ ---------- -----   ------ -------          
+BE/Dataset/Snapshot   Active Mountpoint Space   Policy Created
+-------------------   ------ ---------- -----   ------ -------
 BE5
    p/ROOT/BE5         NR     /          6.10G   static 2008-09-09 16:53
    p/ROOT/BE5/opt     -      /opt       24.55M  static 2008-09-09 16:53
@@ -683,7 +658,6 @@ BE5;215b8387-4968-627c-d2d0-f4a011414bab;NR;/;7786206208;static;1221004384
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB0\fR
 .ad
@@ -694,7 +668,6 @@ Successful completion
 
 .sp
 .ne 2
-.mk
 .na
 \fB>0\fR
 .ad
@@ -706,18 +679,16 @@ Failure
 
 .SH FILES
 .sp
-.LP     
+.LP
 .sp
 .ne 2
-.mk
 .na
 \fB/var/log/beadm/<beName>/create.log.<yyyymmdd_hhmmss>\fR
 .ad
 .sp .6
-.RS 4n    
+.RS 4n
 Log used for capturing beadm create output
 .sp
-.in+2
 .nf
 \fIyyyymmdd_hhmmss\fR - 20071130_140558
 \fIyy\fR - year; 2007
@@ -730,21 +701,18 @@ Log used for capturing beadm create output
 .in -2
 .sp
 .RE
-.RE
 .sp
-.LP     
+.LP
 .sp
 .ne 2
-.mk
 .na
 \fB/etc/default/be\fR
 .ad
 .sp .6
-.RS 4n    
+.RS 4n
 Contains default value for BENAME_STARTS_WITH parameter
 .sp
 .RE
-.RE
 
 .SH ATTRIBUTES
 .sp
@@ -754,13 +722,12 @@ See \fBattributes\fR(5) for descriptions of the  following  attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 
diff --git a/usr/src/man/man1m/boot.1m b/usr/src/man/man1m/boot.1m
index d3ae4d5cfb..deb21f1182 100644
--- a/usr/src/man/man1m/boot.1m
+++ b/usr/src/man/man1m/boot.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH boot 1M "2 Mar 2009" "SunOS 5.11" "System Administration Commands"
+.TH BOOT 1M "Mar 2, 2009"
 .SH NAME
 boot \- start the system kernel or a standalone program
 .SH SYNOPSIS
@@ -193,7 +193,6 @@ boot ... -o \fIopt1\fR[,\fIopt2\fR[,...]]
 where each option may be an action:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdhcp\fR\fR
 .ad
@@ -204,7 +203,6 @@ Require \fBwanboot\fR to obtain configuration parameters by means of DHCP.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprompt\fR\fR
 .ad
@@ -215,7 +213,6 @@ Cause \fBwanboot\fR to enter its command interpreter.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fI<cmd>\fR\fR
 .ad
@@ -238,7 +235,6 @@ single commands or assignments, or a comma-separated list of commands or
 assignments. The configuration parameters are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhost-ip\fR\fR
 .ad
@@ -249,7 +245,6 @@ IP address of the client (in dotted-decimal notation)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrouter-ip\fR\fR
 .ad
@@ -260,7 +255,6 @@ IP address of the default router (in dotted-decimal notation)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsubnet-mask\fR\fR
 .ad
@@ -271,7 +265,6 @@ subnet mask (in dotted-decimal notation)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBclient-id\fR\fR
 .ad
@@ -282,7 +275,6 @@ DHCP client identifier (a quoted ASCII string or hex ASCII)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhostname\fR\fR
 .ad
@@ -293,7 +285,6 @@ hostname to request in DHCP transactions (ASCII)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhttp-proxy\fR\fR
 .ad
@@ -307,7 +298,6 @@ HTTP proxy server specification (IPADDR[:PORT])
 The key names are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3des\fR\fR
 .ad
@@ -318,7 +308,6 @@ the triple DES encryption key (48 hex ASCII characters)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaes\fR\fR
 .ad
@@ -329,7 +318,6 @@ the AES encryption key (32 hex ASCII characters)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsha1\fR\fR
 .ad
@@ -343,7 +331,6 @@ the HMAC SHA-1 signature key (40 hex ASCII characters)
 Finally, the URL or the WAN boot CGI is referred to by means of:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbootserver\fR\fR
 .ad
@@ -357,7 +344,6 @@ URL of WAN boot's CGI (the equivalent of OBP's \fBfile\fR parameter)
 The interpreter accepts the following commands:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhelp\fR\fR
 .ad
@@ -368,7 +354,6 @@ Print a brief description of the available commands
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fIvar\fR=\fIval\fR\fR\fR
 .ad
@@ -380,7 +365,6 @@ parameter names, the key names, or \fBbootserver\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fIvar\fR=\fR\fR
 .ad
@@ -391,7 +375,6 @@ Unset parameter \fIvar\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist\fR\fR
 .ad
@@ -403,7 +386,6 @@ never shown).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprompt\fR\fR
 .ad
@@ -416,7 +398,6 @@ Return) or enter a new value.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgo\fR\fR
 .ad
@@ -428,7 +409,6 @@ interpreter and continue booting.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBexit\fR\fR
 .ad
@@ -655,7 +635,6 @@ Configuration parameters, listed below, are specified as \fIkey\fR=\fIvalue\fR
 attribute pairs.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtftp-server\fR\fR
 .ad
@@ -666,7 +645,6 @@ IP address of the TFTP server
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfile\fR\fR
 .ad
@@ -677,7 +655,6 @@ file to download using TFTP or URL for WAN boot
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhost-ip\fR\fR
 .ad
@@ -688,7 +665,6 @@ IP address of the client (in dotted-decimal notation)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrouter-ip\fR\fR
 .ad
@@ -699,7 +675,6 @@ IP address of the default router
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsubnet-mask\fR\fR
 .ad
@@ -710,7 +685,6 @@ subnet mask (in dotted-decimal notation)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBclient-id\fR\fR
 .ad
@@ -721,7 +695,6 @@ DHCP client identifier
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhostname\fR\fR
 .ad
@@ -732,7 +705,6 @@ hostname to use in DHCP transactions
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhttp-proxy\fR\fR
 .ad
@@ -743,7 +715,6 @@ HTTP proxy server specification (IPADDR[:PORT])
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtftp-retries\fR\fR
 .ad
@@ -754,7 +725,6 @@ maximum number of TFTP retries
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdhcp-retries\fR\fR
 .ad
@@ -1124,7 +1094,6 @@ GRUB menu.
 The following SPARC options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -1137,7 +1106,6 @@ passed to the standalone program.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR \fIdefault-file\fR\fR
 .ad
@@ -1152,7 +1120,6 @@ exported by the \fBboot\fR program.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fIobject\fR\fR
 .ad
@@ -1165,7 +1132,6 @@ failsafe or \fBwanboot\fR boot archive.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR\fR
 .ad
@@ -1180,7 +1146,6 @@ storage pool.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
@@ -1191,7 +1156,6 @@ Display verbose debugging information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIboot-flags\fR\fR
 .ad
@@ -1205,7 +1169,6 @@ program.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIclient-program-args\fR\fR
 .ad
@@ -1217,7 +1180,6 @@ are not interpreted by \fBboot\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfile\fR\fR
 .ad
@@ -1230,7 +1192,6 @@ NVRAM variable, \fBboot\fR chooses an appropriate default filename.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIOBP\fR \fInames\fR\fR
 .ad
@@ -1244,7 +1205,6 @@ adapter plugged into slot 0.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Z\fR \fIdataset\fR\fR
 .ad
@@ -1259,7 +1219,6 @@ Boot from the root file system in the specified ZFS dataset.
 The following x86 options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-B\fR \fIprop\fR=\fIval\fR...\fR
 .ad
@@ -1284,7 +1243,6 @@ menu entry needs the following option added:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIboot-args\fR\fR
 .ad
@@ -1297,7 +1255,6 @@ information about the options available with the kernel.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/platform/i86pc/kernel/$ISADIR/unix\fR\fR
 .ad
@@ -1531,7 +1488,6 @@ to \fB/boot/grub/menu.lst\fR, and use the \fBset-menu\fR subcommand of
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/platform/\fR\fIplatform-name\fR\fB/ufsboot\fR\fR
 .ad
@@ -1542,7 +1498,6 @@ Second-level program to boot from a disk, DVD, or CD
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inittab\fR\fR
 .ad
@@ -1553,7 +1508,6 @@ Table in which the \fBinitdefault\fR state is specified
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/sbin/init\fR\fR
 .ad
@@ -1565,7 +1519,6 @@ Program that brings the system to the \fBinitdefault\fR state
 .SS "64-bit SPARC Only"
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/platform/\fR\fIplatform-name\fR\fB/kernel/sparcv9/unix\fR\fR
 .ad
@@ -1577,7 +1530,6 @@ Default program to boot system.
 .SS "x86 Only"
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/boot\fR\fR
 .ad
@@ -1588,7 +1540,6 @@ Directory containing boot-related files.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/boot/grub/menu.lst\fR\fR
 .ad
@@ -1599,7 +1550,6 @@ Menu of bootable operating systems displayed by GRUB.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/platform/i86pc/kernel/unix\fR\fR
 .ad
@@ -1611,7 +1561,6 @@ Menu of bootable operating systems displayed by GRUB.
 .SS "64-bit x86 Only"
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/platform/i86pc/kernel/amd64/unix\fR\fR
 .ad
diff --git a/usr/src/man/man1m/bootadm.1m b/usr/src/man/man1m/bootadm.1m
index 146298c997..db51b33f58 100644
--- a/usr/src/man/man1m/bootadm.1m
+++ b/usr/src/man/man1m/bootadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH bootadm 1M "25 Apr 2008" "SunOS 5.11" "System Administration Commands"
+.TH BOOTADM 1M "Apr 25, 2008"
 .SH NAME
 bootadm \- manage bootability of GRUB-enabled operating system
 .SH SYNOPSIS
@@ -64,7 +64,6 @@ to manage diskless clients of a different platform type.
 The \fBbootadm\fR command has the following subcommands:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBupdate-archive\fR\fR
 .ad
@@ -76,7 +75,6 @@ platforms.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist-archive\fR\fR
 .ad
@@ -88,7 +86,6 @@ both SPARC and x86 platforms.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBset-menu\fR\fR
 .ad
@@ -101,7 +98,6 @@ change. Applies to x86 platforms only.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist-menu\fR\fR
 .ad
@@ -118,7 +114,6 @@ title of each entry. Applies to x86 platforms only.
 The \fBbootadm\fR command has the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -129,7 +124,6 @@ In an \fBupdate-archive\fR operation, stale files are displayed on stderr.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -141,7 +135,6 @@ updated.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIplatform\fR\fR
 .ad
@@ -156,7 +149,6 @@ than the server. Platform must be one of \fBi86pc\fR, \fBsun4u\fR, or
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR\ \fIaltroot\fR\fR
 .ad
@@ -176,7 +168,6 @@ zone's file system. See \fBzones\fR(5).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIkey\fR=\fIvalue\fR\fR
 .ad
@@ -185,7 +176,6 @@ zone's file system. See \fBzones\fR(5).
 Possible values are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdefault=\fR\fIentrynum\fR\fR
 .ad
@@ -197,7 +187,6 @@ operating system to boot when the timer expires.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtimeout=\fR\fIseconds\fR\fR
 .ad
@@ -323,7 +312,6 @@ mounted. To access the GRUB menu, mount the device and access the GRUB menu at
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -334,7 +322,6 @@ The command completed successfully.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
@@ -351,13 +338,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/bootconfchk.1m b/usr/src/man/man1m/bootconfchk.1m
index 408423467f..56798639b8 100644
--- a/usr/src/man/man1m/bootconfchk.1m
+++ b/usr/src/man/man1m/bootconfchk.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH bootconfchk 1M "18 Apr 2003" "SunOS 5.11" "System Administration Commands"
+.TH BOOTCONFCHK 1M "Apr 18, 2003"
 .SH NAME
 bootconfchk \- verify the integrity of a network boot configuration file
 .SH SYNOPSIS
@@ -23,34 +23,28 @@ Any discrepancies are reported on standard error.
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 An error occurred.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Usage error.
 .RE
 
@@ -62,13 +56,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/busstat.1m b/usr/src/man/man1m/busstat.1m
index 2516a7afa3..9feb5cd343 100644
--- a/usr/src/man/man1m/busstat.1m
+++ b/usr/src/man/man1m/busstat.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH busstat 1M "1 Nov 1999" "SunOS 5.11" "System Administration Commands"
+.TH BUSSTAT 1M "Nov 1, 1999"
 .SH NAME
 busstat \- report bus-related performance statistics
 .SH SYNOPSIS
@@ -14,8 +14,8 @@ busstat \- report bus-related performance statistics
 
 .LP
 .nf
-\fBbusstat\fR [\fB-a\fR] [\fB-n\fR] 
-     [\fB-w \fR \fIdevice-inst\fR [,pic0=\fIevent\fR,pic\fIn\fR=\fIevent\fR ]]... 
+\fBbusstat\fR [\fB-a\fR] [\fB-n\fR]
+     [\fB-w \fR \fIdevice-inst\fR [,pic0=\fIevent\fR,pic\fIn\fR=\fIevent\fR ]]...
      [\fB-r\fR \fIdevice-inst\fR]... [\fIinterval \fR [\fIcount\fR]]
 .fi
 
@@ -55,7 +55,6 @@ reside in.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -66,13 +65,12 @@ Display absolute counter values. The default is \fBdelta\fR values.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIdevice-inst\fR\fR
 .ad
 .sp .6
 .RS 4n
-Display the list of events that the specified device supports 	for each pic.
+Display the list of events that the specified device supports for each pic.
 .sp
 Specify \fIdevice-inst\fR as device (\fBname\fR) followed by an optional
 instance number. If an instance number is specified, the events for that
@@ -82,7 +80,6 @@ first instance of the specified device are displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -93,7 +90,6 @@ Print a usage message.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
@@ -104,7 +100,6 @@ List the devices in the system which support performance counters.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -115,7 +110,6 @@ Do not display a title in the output. The default is to display titles.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIdevice-inst\fR\fR
 .ad
@@ -132,7 +126,6 @@ be sampled when using the \fB-r\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR \fIdevice-inst\fR [,pic0=\fIevent\fR] [,pic\fIn\fR=\fIevent\fR] \fR
 .ad
@@ -152,7 +145,7 @@ counted for a specified \fBpic\fR by providing a comma separated list of
 The \fB-e\fR option displays all valid event names for each device. Any devices
 that are programmed will be sampled every interval seconds and repeated count
 times. It is recommended that the interval specified is small enough to ensure
-that counter wraparound will be detected. The rate at which 	counters
+that counter wraparound will be detected. The rate at which counters
 wraparound varies from device to device. If a user is programming events using
 the \fB-w\fR option and \fBbusstat\fR detects that another user has changed the
 events that are being counted, the tool will terminate as the programmed
@@ -176,34 +169,28 @@ specified in hexadecimal, decimal, or octal, using the usual conventions of
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB0\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB1\fR
 .ad
 .RS 5n
-.rt  
 An error occurred.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB2\fR
 .ad
 .RS 5n
-.rt  
 Another user is writing to the same devices.
 .RE
 
diff --git a/usr/src/man/man1m/cachefsd.1m b/usr/src/man/man1m/cachefsd.1m
index 9f20d929d2..d2e41432d0 100644
--- a/usr/src/man/man1m/cachefsd.1m
+++ b/usr/src/man/man1m/cachefsd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH cachefsd 1M "2 October 2000" "SunOS 5.11" "System Administration Commands"
+.TH CACHEFSD 1M "Oct 2, 2000"
 .SH NAME
 cachefsd \- CacheFS daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/fs/cachefs/cachefsd\fR 
+\fB/usr/lib/fs/cachefs/cachefsd\fR
 .fi
 
 .SH DESCRIPTION
@@ -71,12 +71,10 @@ The running of \fBcachefsd\fR is required for the disconnected mode of CacheFS.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 6n
-.rt  
 Used for invoking \fBcachefsd\fR for the \fB/\fR filesystem.
 .RE
 
diff --git a/usr/src/man/man1m/cachefslog.1m b/usr/src/man/man1m/cachefslog.1m
index 0032ba6f66..3b9770eed6 100644
--- a/usr/src/man/man1m/cachefslog.1m
+++ b/usr/src/man/man1m/cachefslog.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH cachefslog 1M "7 Feb 1997" "SunOS 5.11" "System Administration Commands"
+.TH CACHEFSLOG 1M "Feb 7, 1997"
 .SH NAME
 cachefslog \- Cache File System logging
 .SH SYNOPSIS
@@ -28,35 +28,29 @@ The following options are supported. You must be super-user to use the \fB-f\fR
 and \fB-h\fR options.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIlogfile\fR\fR
 .ad
 .RS 14n
-.rt  
 Specify the log file to be used.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 14n
-.rt  
 Halt logging.
 .RE
 
 .SH OPERANDS
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcachefs_mount_point\fR\fR
 .ad
 .RS 23n
-.rt  
 A mount point of a cache file system.
 .RE
 
@@ -133,23 +127,19 @@ not logged: /home/sam\fI\fR
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 success
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-zero\fR
 .ad
 .RS 12n
-.rt  
 an error has occurred.
 .RE
 
@@ -161,12 +151,10 @@ an error has occurred.
 .SH DIAGNOSTICS
 .sp
 .ne 2
-.mk
 .na
 \fB\fBInvalid path\fR\fR
 .ad
 .RS 16n
-.rt  
 It is illegal to specify a path within a cache file system.
 .RE
 
diff --git a/usr/src/man/man1m/cachefspack.1m b/usr/src/man/man1m/cachefspack.1m
index 46b632e95b..ccc602fb04 100644
--- a/usr/src/man/man1m/cachefspack.1m
+++ b/usr/src/man/man1m/cachefspack.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH cachefspack 1M "18 Mar 2004" "SunOS 5.11" "System Administration Commands"
+.TH CACHEFSPACK 1M "Mar 18, 2004"
 .SH NAME
 cachefspack \- pack files and file systems in the cache
 .SH SYNOPSIS
 .LP
 .nf
-\fBcachefspack\fR [\fB-h\fR] [\fB-i\fR | \fB-p\fR | \fB-u\fR] [\fB-f\fR \fIpacking-list\fR] 
+\fBcachefspack\fR [\fB-h\fR] [\fB-i\fR | \fB-p\fR | \fB-u\fR] [\fB-f\fR \fIpacking-list\fR]
      [\fB-U\fR \fIcache-directory\fR] [\fIfile\fR]...
 .fi
 
@@ -30,12 +30,10 @@ available for \fBcachefs\fR with NFSv4.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-f\fR\fB \fR\fIpacking-list\fR\fR
 .ad
 .RS 22n
-.rt  
 Specify a file containing a list of files and directories to be packed. Options
 within subdirectories and files can also be specified. The format and rules
 governing \fIpacking-list\fR are described on the \fBpackingrules\fR(4) manual
@@ -46,56 +44,46 @@ recursively processing directories are not followed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 22n
-.rt  
 Help. Print a brief summary of all the options.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 22n
-.rt  
 View information about the packed files.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 22n
-.rt  
 Pack the file or files specified by \fBfile\fR. This is the default behavior.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
 .RS 22n
-.rt  
 Unpack the file or files specified by \fBfile\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-U\fR\fB \fR\fIcache-directory\fR\fR
 .ad
 .RS 22n
-.rt  
 Unpack all files in the specified cache directory.
 .RE
 
@@ -105,12 +93,10 @@ Unpack all files in the specified cache directory.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfile\fR\fR
 .ad
 .RS 8n
-.rt  
 A path name of a file to be packed or unpacked.
 .RE
 
@@ -228,23 +214,19 @@ the file's path name:
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
diff --git a/usr/src/man/man1m/cachefsstat.1m b/usr/src/man/man1m/cachefsstat.1m
index 07cdadfb92..07f050842b 100644
--- a/usr/src/man/man1m/cachefsstat.1m
+++ b/usr/src/man/man1m/cachefsstat.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH cachefsstat 1M "9 Oct 2003" "SunOS 5.11" "System Administration Commands"
+.TH CACHEFSSTAT 1M "Oct 9, 2003"
 .SH NAME
 cachefsstat \- Cache File System statistics
 .SH SYNOPSIS
@@ -31,7 +31,7 @@ The statistical information has the following format:
 .nf
 <\fIcache hit rate\fR>
 <\fIconsistency checks\fR>
-<\fImodifies\fR> 
+<\fImodifies\fR>
 .fi
 .in -2
 .sp
@@ -41,36 +41,30 @@ The statistical information has the following format:
 where:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIhit rate\fR\fR
 .ad
 .RS 22n
-.rt  
 The percentage of cache hits over the total number of attempts, followed by the
 actual numbers of hits and misses.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIconsistency checks\fR\fR
 .ad
 .RS 22n
-.rt  
 The number of consistency checks performed, followed by the number that passed,
 and the number that failed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fImodifies\fR\fR
 .ad
 .RS 22n
-.rt  
 The number of modify operations, including writes, creates, etc.
 .RE
 
@@ -80,12 +74,10 @@ The number of modify operations, including writes, creates, etc.
 The following option is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-z\fR\fR
 .ad
 .RS 6n
-.rt  
 Zero (reinitialize) statistics. Execute \fBcachefsstat\fR \fB-z\fR before
 executing \fBcachefsstat\fR again to gather statistics on the cache
 performance. This option can only be use by the superuser. The statistics
@@ -124,23 +116,19 @@ garbage collection:           0
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-zero\fR
 .ad
 .RS 12n
-.rt  
 An error occurred.
 .RE
 
diff --git a/usr/src/man/man1m/cachefswssize.1m b/usr/src/man/man1m/cachefswssize.1m
index 9899f0df69..fdef9dfc1a 100644
--- a/usr/src/man/man1m/cachefswssize.1m
+++ b/usr/src/man/man1m/cachefswssize.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH cachefswssize 1M "16 Sep 1996" "SunOS 5.11" "System Administration Commands"
+.TH CACHEFSWSSIZE 1M "Sep 16, 1996"
 .SH NAME
 cachefswssize \- determine working set size for cachefs
 .SH SYNOPSIS
@@ -35,26 +35,24 @@ See \fBlargefile\fR(5) for the description of the behavior of
 
 .sp
 .TS
-tab();
-lw(1.83i) lw(1.83i) lw(1.83i) 
-lw(1.83i) lw(1.83i) lw(1.83i) 
-.
-\fB/home/sam\fR
-\fBend size:\fR\fB10688k\fR
-\fBhigh water size:\fR\fB10704k\fR
-
-\fB/foo\fR
-\fBend size:\fR\fB128k\fR
-\fBhigh water size:\fR\fB128k\fR
-
-\fB/usr/dist\fR
-\fBend size:\fR\fB1472k\fR
-\fBhigh water size:\fR\fB1472k\fR
-
-\fBtotal for cache\fR
-\fBinitial size:\fR\fB110960k\fR
-\fBend size:\fR\fB12288k\fR
-\fBhigh water size:\fR\fB12304k\fR
+l l l
+l l l .
+\fB/home/sam\fR		
+	\fBend size:\fR	\fB10688k\fR
+	\fBhigh water size:\fR	\fB10704k\fR
+		
+\fB/foo\fR		
+	\fBend size:\fR	\fB128k\fR
+	\fBhigh water size:\fR	\fB128k\fR
+		
+\fB/usr/dist\fR		
+	\fBend size:\fR	\fB1472k\fR
+	\fBhigh water size:\fR	\fB1472k\fR
+		
+\fBtotal for cache\fR		
+	\fBinitial size:\fR	\fB110960k\fR
+	\fBend size:\fR	\fB12288k\fR
+	\fBhigh water size:\fR	\fB12304k\fR
 .TE
 
 .SH EXIT STATUS
@@ -63,23 +61,19 @@ lw(1.83i) lw(1.83i) lw(1.83i)
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 success
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-zero\fR
 .ad
 .RS 12n
-.rt  
 an error has occurred.
 .RE
 
@@ -91,7 +85,6 @@ an error has occurred.
 .SH DIAGNOSTICS
 .sp
 .ne 2
-.mk
 .na
 \fB\fBproblems were encountered writing log file\fR\fR
 .ad
@@ -103,7 +96,6 @@ most common problem is running out of disk space.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinvalid log\fR \fBfile\fR\fR
 .ad
diff --git a/usr/src/man/man1m/captoinfo.1m b/usr/src/man/man1m/captoinfo.1m
index 7dc247401e..e49c000a0e 100644
--- a/usr/src/man/man1m/captoinfo.1m
+++ b/usr/src/man/man1m/captoinfo.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH captoinfo 1M "18 May 1993" "SunOS 5.11" "System Administration Commands"
+.TH CAPTOINFO 1M "May 18, 1993"
 .SH NAME
 captoinfo \- convert a termcap description into a terminfo description
 .SH SYNOPSIS
@@ -32,54 +32,45 @@ set, then the file \fB/usr/share/lib/termcap\fR is read.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\(mi1\fR\fR
 .ad
 .RS 12n
-.rt  
 Display the fields one to a line. Otherwise, the fields are printed several to
 a line, with a maximum width of 60 characters.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 12n
-.rt  
 Display tracing information on the standard error as the program runs.
 Specifying additional \fB-v\fR options displays more detailed information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
 .RS 12n
-.rt  
 Display the version of the program in use on the standard error and then exit.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR\fI width\fR\fR
 .ad
 .RS 12n
-.rt  
 Change the output to \fIwidth\fR characters.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/share/lib/terminfo/?/*\fR\fR
 .ad
@@ -90,7 +81,6 @@ compiled terminal description database
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/share/lib/termcap\fR\fR
 .ad
diff --git a/usr/src/man/man1m/catman.1m b/usr/src/man/man1m/catman.1m
index 7967ec618b..eea9348121 100644
--- a/usr/src/man/man1m/catman.1m
+++ b/usr/src/man/man1m/catman.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH catman 1M "27 Feb 1998" "SunOS 5.11" "System Administration Commands"
+.TH CATMAN 1M "Feb 27, 1998"
 .SH NAME
 catman \- create the formatted files for the reference manual
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/bin/catman\fR [\fB-c\fR] [\fB-n\fR] [\fB-p\fR] [\fB-t\fR] [\fB-w\fR] [\fB-M\fR \fIdirectory\fR] 
+\fB/usr/bin/catman\fR [\fB-c\fR] [\fB-n\fR] [\fB-p\fR] [\fB-t\fR] [\fB-w\fR] [\fB-M\fR \fIdirectory\fR]
      [\fB-T\fR \fImacro-package\fR] [\fIsections\fR]
 .fi
 
@@ -60,12 +60,10 @@ file to be sourced.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 20n
-.rt  
 Create unformatted nroff source files in the appropriate \fBman\fR
 subdirectories from the  \fBSGML\fR sources. This option will overwrite any
 existing file in the \fBman\fR directory of the same name as the  \fBSGML\fR
@@ -74,12 +72,10 @@ file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 20n
-.rt  
 Do not create (or recreate) the \fBwindex\fR database. If the \fB-n\fR option
 is specified, the \fBwindex\fR database is not created and the \fBapropos\fR,
 \fBwhatis\fR, \fBman\fR \fB-f\fR, and \fBman\fR \fB-k\fR commands will fail.
@@ -87,47 +83,39 @@ is specified, the \fBwindex\fR database is not created and the \fBapropos\fR,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 20n
-.rt  
 Print what would be done instead of doing it.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
 .RS 20n
-.rt  
 Create \fBtroff\fRed entries in the appropriate \fBfmt\fR subdirectories
 instead of \fBnroff\fRing into the \fBcat\fR subdirectories.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR\fR
 .ad
 .RS 20n
-.rt  
 Only create the \fBwindex\fR database that is used by \fBwhatis\fR(1) and the
 \fBman\fR(1) \fB-f\fR and \fB-k\fR options.  No manual reformatting is done.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR\fI directory\fR\fR
 .ad
 .RS 20n
-.rt  
 Update manual pages located in the specified \fIdirectory\fR,
 (\fB/usr/share/man\fR by default). If the  \fB-M\fR option is specified, the
 directory argument must not contain a `,' (comma), since a comma is used to
@@ -136,12 +124,10 @@ delineate section numbers. See \fBman\fR(1).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR\fI macro-package\fR\fR
 .ad
 .RS 20n
-.rt  
 Use \fImacro-package\fR in place of the standard manual page macros, (
 \fBman\fR(5) by default).
 .RE
@@ -152,12 +138,10 @@ Use \fImacro-package\fR in place of the standard manual page macros, (
 The following operand is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsections\fR\fR
 .ad
 .RS 12n
-.rt  
 If there is one parameter not starting with a `\fB\(mi\fR\&', it is taken to be
 a space separated list of manual sections to be processed by \fBcatman\fR. If
 this operand is specified, only the manual sections in the list will be
@@ -178,24 +162,20 @@ the environment variable \fBMANPATH\fR are processed.
 .SH ENVIRONMENT VARIABLES
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTROFF\fR\fR
 .ad
 .RS 11n
-.rt  
 The name of the formatter to use when the \fB-t\fR flag is given. If not set,
 \fBtroff\fR(1) is used.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMANPATH\fR\fR
 .ad
 .RS 11n
-.rt  
 A colon-separated list of directories that are processed by \fBcatman\fR and
 \fBman\fR(1). Each directory can be followed by a comma-separated list of
 sections. If set, its value overrides \fB/usr/share/man\fR as the default
@@ -206,89 +186,73 @@ path. The \fB-M\fR and \fB-s\fR flags, in turn, override these values.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/share/man\fR\fR
 .ad
 .RS 28n
-.rt  
 default manual directory location
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/share/man/man*/*.*\fR\fR
 .ad
 .RS 28n
-.rt  
 raw nroff input files
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/share/man/sman*/*.*\fR\fR
 .ad
 .RS 28n
-.rt  
 raw  \fBSGML\fR input files
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/share/man/cat*/*.*\fR\fR
 .ad
 .RS 28n
-.rt  
 preformatted \fBnroff\fRed manual pages
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/share/man/fmt*/*.*\fR\fR
 .ad
 .RS 28n
-.rt  
 preformatted \fBtroff\fRed manual pages
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/share/man/windex\fR\fR
 .ad
 .RS 28n
-.rt  
 table of contents and keyword database
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/makewhatis\fR\fR
 .ad
 .RS 28n
-.rt  
 command script to make  \fBwindex\fR database
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/share/lib/tmac/an\fR\fR
 .ad
 .RS 28n
-.rt  
 default macro package
 .RE
 
@@ -300,13 +264,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-CSIEnabled
+CSI	Enabled
 .TE
 
 .SH SEE ALSO
@@ -318,7 +281,6 @@ CSIEnabled
 .SH DIAGNOSTICS
 .sp
 .ne 2
-.mk
 .na
 \fB\fBman?/xxx.? (.so'ed from man?/yyy.?): No such file or directory\fR\fR
 .ad
@@ -330,7 +292,6 @@ inside them.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtarget of .so in man?/xxx.? must be relative to /usr/man\fR\fR
 .ad
@@ -342,7 +303,6 @@ directory \fB/usr/man\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBopendir:man?:\fR \fBNo\fR \fBsuch\fR \fBfile\fR \fBor\fR
 \fBdirectory\fR\fR
@@ -355,7 +315,6 @@ normally looks for is missing.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB*.*:\fR \fBNo\fR \fBsuch\fR \fBfile\fR \fBor\fR \fBdirectory\fR\fR
 .ad
@@ -406,7 +365,7 @@ An example of proper coding of these lines is:
 .sp
 .in +2
 .nf
-\&.TH nismatch 1M "10 Apr 1998"
+\&.TH NISMATCH 1M "Apr "10, 1998""
 \&.SH NAME
 nismatch, nisgrep \e- utilities for searching NIS+ tables
 .fi
diff --git a/usr/src/man/man1m/cfgadm.1m b/usr/src/man/man1m/cfgadm.1m
index fa7d1664ef..782efa4be3 100644
--- a/usr/src/man/man1m/cfgadm.1m
+++ b/usr/src/man/man1m/cfgadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH cfgadm 1M "25 Oct 2004" "SunOS 5.11" "System Administration Commands"
+.TH CFGADM 1M "Oct 25, 2004"
 .SH NAME
 cfgadm \- configuration administration
 .SH SYNOPSIS
@@ -21,7 +21,7 @@ cfgadm \- configuration administration
 
 .LP
 .nf
-\fB/usr/sbin/cfgadm\fR [\fB-v\fR] [\fB-a\fR] [\fB-s\fR \fIlisting_options\fR] 
+\fB/usr/sbin/cfgadm\fR [\fB-v\fR] [\fB-a\fR] [\fB-s\fR \fIlisting_options\fR]
      [\fB-o\fR \fIhardware_options\fR] [\fB-l\fR [\fIap_id\fR | \fIap_type\fR]]
 .fi
 
@@ -32,7 +32,7 @@ cfgadm \- configuration administration
 
 .LP
 .nf
-\fB/usr/sbin/cfgadm\fR [\fB-v\fR] [\fB-o\fR \fIhardware_options\fR] \fB-h\fR 
+\fB/usr/sbin/cfgadm\fR [\fB-v\fR] [\fB-o\fR \fIhardware_options\fR] \fB-h\fR
      [\fIap_id\fR | \fIap_type\fR]
 .fi
 
@@ -215,7 +215,6 @@ The arguments for this command conform to the \fBgetopt\fR(3C) and
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -226,7 +225,6 @@ Specifies that the \fB-l\fR option must also list dynamic attachment points.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fIfunction\fR\fR
 .ad
@@ -241,12 +239,10 @@ state transitions at the attachment point by calling hardware specific library
 routines and are defined in the following list.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinsert\fR\fR
 .ad
 .RS 15n
-.rt  
 Performs operations that allows the user to manually insert an occupant or to
 activate a hardware supplied mechanism that performs the physical insertion.
 \fBinsert\fR can have hardware specific side effects that temporarily suspend
@@ -259,12 +255,10 @@ errors can cause this function to fail and set the receptacle condition to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremove\fR\fR
 .ad
 .RS 15n
-.rt  
 Performs operations that allow the user to manually remove an occupant or to
 activate a hardware supplied mechanism to perform the physical removal.
 \fBremove\fR can have hardware specific side effects that temporarily suspend
@@ -277,12 +271,10 @@ unusable.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisconnect\fR\fR
 .ad
 .RS 15n
-.rt  
 Performs hardware specific operations to put a receptacle in the disconnected
 state, which can prevent an occupant from operating in a normal fashion through
 the receptacle.
@@ -290,12 +282,10 @@ the receptacle.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconnect\fR\fR
 .ad
 .RS 15n
-.rt  
 Performs hardware specific operations to put the receptacle in the
 \fBconnected\fR state, which allows an occupant to operate in a normal fashion
 through the receptacle.
@@ -303,12 +293,10 @@ through the receptacle.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconfigure\fR\fR
 .ad
 .RS 15n
-.rt  
 Performs hardware specific operations that allow an occupant's hardware
 resources to be usable by Solaris. Occupants that are configured are part of
 the system configuration and are available for manipulation by Solaris device
@@ -318,12 +306,10 @@ manipulation maintenance commands (eg: \fBpsradm\fR(1M), \fBmount\fR(1M),
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunconfigure\fR\fR
 .ad
 .RS 15n
-.rt  
 Performs hardware specific operations that logically remove an occupant's
 hardware resources from the system. The occupant must currently be configured
 and its hardware resources must not be in use by Solaris.
@@ -352,7 +338,6 @@ the force option from having any effect.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -366,7 +351,6 @@ conditions, at the discretion of any hardware dependent safety checks.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-h\fR [\fIap_id\fR | \fIap_type\fR \|.\|.\|. ]\fR
 .ad
@@ -379,7 +363,6 @@ indicated by the argument is called.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-l\fR [\fIap_id\fR | \fIap_type\fR \|.\|.\|. ]\fR
 .ad
@@ -395,7 +378,6 @@ attachment points are dynamically expanded.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -410,7 +392,6 @@ these standard channels does not correspond to a terminal (as determined by
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fIhardware_options\fR\fR
 .ad
@@ -424,7 +405,6 @@ convention.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fIlisting_options\fR\fR
 .ad
@@ -445,7 +425,7 @@ the following syntax:
 .sp
 .in +2
 .nf
-cfgadm \fB-s\fR select=attr1(value1):attr2(value2)... 
+cfgadm \fB-s\fR select=attr1(value1):attr2(value2)...
 .fi
 .in -2
 .sp
@@ -505,7 +485,6 @@ These listing options can be used to create parsable output. See \fBNOTES\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
@@ -533,7 +512,6 @@ unrecoverable errors were found. The attachment point should only be set to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -547,7 +525,6 @@ for each attachment point for the \fB-l\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fIhardware_function\fR\fR
 .ad
@@ -563,7 +540,6 @@ conforms to the \fBgetsubopt\fR(3C) syntax convention.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-y\fR\fR
 .ad
@@ -629,10 +605,10 @@ system:slot5       cpu/mem      connected       configured      ok
 system:slot6       unknown      disconnected    unconfigured    unusable
 system:slot7       unknown      empty           unconfigured    ok
 c0                 scsi-bus     connected       configured      unknown
-c0::dsk/c0t14d0    disk         connected       configured      unknown 
-c0::dsk/c0t11d0    disk         connected       configured      unknown 
+c0::dsk/c0t14d0    disk         connected       configured      unknown
+c0::dsk/c0t11d0    disk         connected       configured      unknown
 c0::dsk/c0t8d0     disk         connected       configured      unknown
-c0::rmt/0          tape         connected       configured      unknown 
+c0::rmt/0          tape         connected       configured      unknown
 c1                 scsi-bus     connected       configured      unknown
 .fi
 .in -2
@@ -757,36 +733,30 @@ that affect the execution of \fBcfgadm\fR: \fBLC_TIME\fR, \fBLC_MESSAGES\fR,
 \fBNLSPATH\fR and \fBTZ\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLC_MESSAGES\fR\fR
 .ad
 .RS 15n
-.rt  
 Determines how \fBcfgadm\fR displays column headings and error messages.
 Listing output data is not affected by the setting of this variable.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLC_TIME\fR\fR
 .ad
 .RS 15n
-.rt  
 Determines how \fBcfgadm\fR displays human readable status changed time
 (\fBstatus_time\fR).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTZ\fR\fR
 .ad
 .RS 15n
-.rt  
 Specifies the timezone used when converting the status changed time. This
 applies to both the human readable (\fBstatus_time\fR) and parsable
 (\fBstatus_time_p\fR) formats.
@@ -798,45 +768,37 @@ applies to both the human readable (\fBstatus_time\fR) and parsable
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 An error occurred.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Configuration administration not supported on specified target.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 5n
-.rt  
 Usage error.
 .RE
 
diff --git a/usr/src/man/man1m/cfgadm_ac.1m b/usr/src/man/man1m/cfgadm_ac.1m
index 4a6a09139d..248df05ef2 100644
--- a/usr/src/man/man1m/cfgadm_ac.1m
+++ b/usr/src/man/man1m/cfgadm_ac.1m
@@ -3,25 +3,25 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH cfgadm_ac 1M "29 Sep 1999" "SunOS 5.11" "System Administration Commands"
+.TH CFGADM_AC 1M "Sep 29, 1999"
 .SH NAME
 cfgadm_ac \- EXX00 memory system administration
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/cfgadm\fR [\fB-c\fR configure] [\fB-f\fR] 
+\fB/usr/sbin/cfgadm\fR [\fB-c\fR configure] [\fB-f\fR]
      [\fB-o\fR disable-at-boot | enable-at-boot ] ac\fI#\fR:bank\fI#\fR ...
 .fi
 
 .LP
 .nf
-\fB/usr/sbin/cfgadm\fR [\fB-c\fR unconfigure] 
+\fB/usr/sbin/cfgadm\fR [\fB-c\fR unconfigure]
      [\fB-o\fR disable-at-bootp | enable-at-boot ] ac\fI#\fR:bank\fI#\fR ...
 .fi
 
 .LP
 .nf
-\fB/usr/sbin/cfgadm\fR [\fB-v\fR] 
+\fB/usr/sbin/cfgadm\fR [\fB-v\fR]
      [\fB-o\fR quick | normal | extended, [max_errors=\fI#\fR] ] \fB-t\fR ac\fI#\fR:bank\fI#\fR...
 .fi
 
@@ -62,7 +62,6 @@ Refer to \fBcfgadm\fR(1M) for complete descriptions of the command options.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR configure | unconfigure\fR
 .ad
@@ -97,7 +96,6 @@ disabling the timeout.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -110,7 +108,6 @@ variable. See \fBPlatform Notes:Sun Enterprise 6x00/5x00/4x00/3x00 Systems\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
@@ -136,7 +133,7 @@ field has the following information for connected banks:
 .sp
 .in +2
 .nf
-slot# sizeMb|sizeGb [(sizeMb|sizeGb used)] base 0x### 
+slot# sizeMb|sizeGb [(sizeMb|sizeGb used)] base 0x###
       [interleaved #-way] [disabled at boot] [permanent]
 .fi
 .in -2
@@ -153,7 +150,6 @@ permanent.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR disable-at-boot | enable-at-boot\fR
 .ad
@@ -169,7 +165,6 @@ in the disabled memory list.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR extended | normal | quick\fR
 .ad
@@ -187,7 +182,6 @@ See \fB-t\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR max_errors=\fI#\fR\fR
 .ad
@@ -199,7 +193,6 @@ If not specified, a default of \fB32\fR is assumed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR timeout=\fI#\fR\fR
 .ad
@@ -212,7 +205,6 @@ timeout.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
@@ -228,7 +220,6 @@ the attachment point.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -240,7 +231,6 @@ to display detailed progress and results of tests.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR relocate-test\fR
 .ad
@@ -259,12 +249,10 @@ purposes only.
 The following operand is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIac#\fR:\fIbank#\fR\fR
 .ad
 .RS 13n
-.rt  
 The attachment points for memory banks are published by instances of the
 address controller (\fBac\fR) driver (\fIac#\fR). One instance of the \fBac\fR
 driver is created for each system board, but only those instances associated
@@ -276,7 +264,7 @@ bank1.
 \fBFILES\fR section.
 .sp
 The \fBac\fR driver instance numbering has no relation to the slot number for
-the 	corresponding board. The full physical attachment point identifier has the
+the corresponding board. The full physical attachment point identifier has the
 slot number incorporated into it as twice the slot number in hexadecimal
 directly following the \fBfhc@\fR part.
 .RE
@@ -284,7 +272,6 @@ directly following the \fBfhc@\fR part.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB/devices/fhc@*,f8800000/ac@0,1000000:bank?\fR
 .ad
@@ -295,7 +282,6 @@ attachment points
 
 .sp
 .ne 2
-.mk
 .na
 \fB/usr/platform/sun4u/lib/cfgadm/cfgadm_ac.so.1\fR
 .ad
diff --git a/usr/src/man/man1m/cfgadm_cardbus.1m b/usr/src/man/man1m/cfgadm_cardbus.1m
index 55d7b4790f..12d18b4ea7 100644
--- a/usr/src/man/man1m/cfgadm_cardbus.1m
+++ b/usr/src/man/man1m/cfgadm_cardbus.1m
@@ -3,26 +3,26 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH cfgadm_cardbus 1M "11 July 2006" "SunOS 5.11" "System Administration Commands"
+.TH CFGADM_CARDBUS 1M "Jul 11, 2006"
 .SH NAME
 cfgadm_cardbus \- cardbus hardware specific commands for cfgadm
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/cfgadm\fR [\fB-f \fR] [\fB-y \fR | \fB-n \fR] [\fB-v\fR] 
+\fB/usr/sbin/cfgadm\fR [\fB-f \fR] [\fB-y \fR | \fB-n \fR] [\fB-v\fR]
      [\fB-o\fR \fIhardware_options\fR] \fB-c\fR\fI function\fR \fIap_id\fR [\fIap_id\fR]
 .fi
 
 .LP
 .nf
-\fB/usr/sbin/cfgadm\fR [\fB-f \fR] [\fB-y \fR | \fB-n \fR] [\fB-v\fR] 
-     [\fB-o\fR \fIhardware_options\fR] \fB-x\fR\fI hardware_function\fR \fIap_id\fR 
+\fB/usr/sbin/cfgadm\fR [\fB-f \fR] [\fB-y \fR | \fB-n \fR] [\fB-v\fR]
+     [\fB-o\fR \fIhardware_options\fR] \fB-x\fR\fI hardware_function\fR \fIap_id\fR
      [\fIap_id\fR]
 .fi
 
 .LP
 .nf
-\fB/usr/sbin/cfgadm\fR [\fB-v\fR] [\fB-s\fR \fIlisting_options\fR] 
+\fB/usr/sbin/cfgadm\fR [\fB-v\fR] [\fB-s\fR \fIlisting_options\fR]
      [\fB-o\fR \fIhardware_options\fR] [\fB-l\fR [\fIap_id\fR | \fIap_type\fR]]
 .fi
 
@@ -33,7 +33,7 @@ cfgadm_cardbus \- cardbus hardware specific commands for cfgadm
 
 .LP
 .nf
-\fB/usr/sbin/cfgadm\fR [\fB-v\fR] [\fB-o\fR \fIhardware_function\fR] \fB-h\fR 
+\fB/usr/sbin/cfgadm\fR [\fB-v\fR] [\fB-o\fR \fIhardware_function\fR] \fB-h\fR
      [\fIap_id\fR| \fI ap_type\fR]
 .fi
 
diff --git a/usr/src/man/man1m/cfgadm_fp.1m b/usr/src/man/man1m/cfgadm_fp.1m
index 8a0976ab49..d276e6b45a 100644
--- a/usr/src/man/man1m/cfgadm_fp.1m
+++ b/usr/src/man/man1m/cfgadm_fp.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH cfgadm_fp 1M "10 Jan 2008" "SunOS 5.11" "System Administration Commands"
+.TH CFGADM_FP 1M "Jan 10, 2008"
 .SH NAME
 cfgadm_fp \- driver specific commands for cfgadm
 .SH SYNOPSIS
@@ -15,7 +15,7 @@ cfgadm_fp \- driver specific commands for cfgadm
 
 .LP
 .nf
-\fB/usr/sbin/cfgadm\fR [\fB-v\fR] [\fB-a\fR] [\fB-s\fR \fIlisting_options\fR] 
+\fB/usr/sbin/cfgadm\fR [\fB-v\fR] [\fB-a\fR] [\fB-s\fR \fIlisting_options\fR]
      [\fB-o\fR \fIhardware_options\fR] [\fB-l\fR [\fIap_id\fR]]
 .fi
 
@@ -194,7 +194,6 @@ The receptacle and occupant state for attachment points at the \fBfp\fR port
 have the following meanings:
 .sp
 .ne 2
-.mk
 .na
 \fBconfigured\fR
 .ad
@@ -205,7 +204,6 @@ One or more devices configured on the \fBfp\fR port
 
 .sp
 .ne 2
-.mk
 .na
 \fBconnected\fR
 .ad
@@ -216,7 +214,6 @@ One or more devices configured on the \fBfp\fR port
 
 .sp
 .ne 2
-.mk
 .na
 \fBdisconnected\fR
 .ad
@@ -227,7 +224,6 @@ One or more devices configured on the \fBfp\fR port
 
 .sp
 .ne 2
-.mk
 .na
 \fBempty\fR
 .ad
@@ -238,7 +234,6 @@ Not applicable
 
 .sp
 .ne 2
-.mk
 .na
 \fBunconfigured\fR
 .ad
@@ -252,7 +247,6 @@ No devices configured on the \fBfp\fR port
 The state for individual Fibre Channel devices on an \fBfp\fR port:
 .sp
 .ne 2
-.mk
 .na
 \fBconfigured\fR
 .ad
@@ -263,7 +257,6 @@ Device is configured into Solaris and is available for use
 
 .sp
 .ne 2
-.mk
 .na
 \fBconnected\fR
 .ad
@@ -274,7 +267,6 @@ Device is configured into Solaris and is available for use
 
 .sp
 .ne 2
-.mk
 .na
 \fBdisconnected\fR
 .ad
@@ -285,7 +277,6 @@ Device is configured into Solaris and is available for use
 
 .sp
 .ne 2
-.mk
 .na
 \fBunconfigured\fR
 .ad
@@ -300,7 +291,6 @@ The \fBcondition\fR field for attachment points at the \fBfp\fR port has the
 following meanings:
 .sp
 .ne 2
-.mk
 .na
 \fBfailed\fR
 .ad
@@ -316,7 +306,6 @@ The \fBcondition\fR field for individual Fibre Channel devices on an \fBfp\fR
 port has the following meanings:
 .sp
 .ne 2
-.mk
 .na
 \fBfailed\fR
 .ad
@@ -327,7 +316,6 @@ An error is encountered while probing a device on Fabric.
 
 .sp
 .ne 2
-.mk
 .na
 \fBfailing\fR
 .ad
@@ -341,7 +329,6 @@ the local port through which the device was configured.
 
 .sp
 .ne 2
-.mk
 .na
 \fBunusable\fR
 .ad
@@ -367,7 +354,6 @@ obtaining configuration administration help messages (\fB-h\fR).
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIfunction\fR\fR
 .ad
@@ -381,7 +367,6 @@ port attachment point, the following configuration state change operations are
 supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconfigure\fR\fR
 .ad
@@ -404,7 +389,6 @@ connected through. Refer to \fBfp\fR(7D) for additional details on the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunconfigure\fR\fR
 .ad
@@ -433,7 +417,6 @@ the same way it is applied to a Fabric device.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -446,7 +429,6 @@ Force the \fBconfigure\fR change state operation to occur irrespective of the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIap_id\fR\fR
 .ad
@@ -458,7 +440,6 @@ point.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIhardware_options\fR\fR
 .ad
@@ -467,7 +448,6 @@ point.
 The following hardware options are supported.
 .sp
 .ne 2
-.mk
 .na
 \fBshow_SCSI_LUN\fR
 .ad
@@ -504,7 +484,6 @@ You can specify the following commands with the \fB-c\fR option to control the
 update behavior of the repository:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBforce_update\fR\fR
 .ad
@@ -517,7 +496,6 @@ deleted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBno_update\fR\fR
 .ad
@@ -536,7 +514,6 @@ following option with the \fB-c\fR unconfigure command removes only Solaris
 devices with the unusable condition for a Fibre Channel device.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunusable_SCSI_LUN\fR\fR
 .ad
@@ -550,7 +527,6 @@ is removed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIlisting_options\fR\fR
 .ad
@@ -561,7 +537,6 @@ Refer to \fBcfgadm\fR(1M) for usage information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fIap_id\fR\fR
 .ad
@@ -572,7 +547,6 @@ No test commands are available at present.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fIhardware_function\fR\fR
 .ad
@@ -680,7 +654,6 @@ device:
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/cfgadm/fp.so.1\fR\fR
 .ad
@@ -691,7 +664,6 @@ Hardware-specific library for Fibre Channel Fabric device node management.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/cfg/fp/fabric_WWN_map\fR\fR
 .ad
@@ -705,7 +677,6 @@ file is set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/rcS.d/fdevattach\fR\fR
 .ad
diff --git a/usr/src/man/man1m/cfgadm_ib.1m b/usr/src/man/man1m/cfgadm_ib.1m
index 981f3d6063..b9744b74e2 100644
--- a/usr/src/man/man1m/cfgadm_ib.1m
+++ b/usr/src/man/man1m/cfgadm_ib.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH cfgadm_ib 1M "2 Jul 2008" "SunOS 5.11" "System Administration Commands"
+.TH CFGADM_IB 1M "Jul 2, 2008"
 .SH NAME
 cfgadm_ib \- InfiniBand hardware specific commands for cfgadm
 .SH SYNOPSIS
@@ -105,7 +105,6 @@ of Port, VPPA and HCA_SVC device contains  its Partition Key (\fIP_Key\fR),
 of ap_id is as below:
 .sp
 .ne 2
-.mk
 .na
 \fBPort device\fR
 .ad
@@ -116,7 +115,6 @@ of ap_id is as below:
 
 .sp
 .ne 2
-.mk
 .na
 \fBVPPA device\fR
 .ad
@@ -127,7 +125,6 @@ of ap_id is as below:
 
 .sp
 .ne 2
-.mk
 .na
 \fBHCA_SVC device\fR
 .ad
@@ -160,7 +157,7 @@ one HCA_SVC) and one HCA:
 .sp
 .in +2
 .nf
-example# cfgadm -al 
+example# cfgadm -al
 Ap_Id                    Type       Receptacle   Occupant      Condition
 hca:21346543210a987      IB-HCA     connected    configured    ok
 ib                       IB-FABRIC  connected    configured    ok
@@ -197,7 +194,6 @@ listing attachment points.
 The receptacle state for attachment points have the following meanings:
 .sp
 .ne 2
-.mk
 .na
 \fBconnected\fR
 .ad
@@ -218,7 +214,6 @@ All IB ap_ids are always shown as connected.
 The occupant state for attachment points have the following meanings:
 .sp
 .ne 2
-.mk
 .na
 \fBconfigured\fR
 .ad
@@ -229,7 +224,6 @@ The IB device, and the HCA ap_id, are configured and usable by Solaris.
 
 .sp
 .ne 2
-.mk
 .na
 \fBunconfigured\fR
 .ad
@@ -250,7 +244,6 @@ hardware.
 The attachment point conditions are:
 .sp
 .ne 2
-.mk
 .na
 \fBfailed\fR
 .ad
@@ -261,7 +254,6 @@ Not used.
 
 .sp
 .ne 2
-.mk
 .na
 \fBfailing\fR
 .ad
@@ -272,7 +264,6 @@ Not used.
 
 .sp
 .ne 2
-.mk
 .na
 \fBok\fR
 .ad
@@ -283,7 +274,6 @@ Normal state. Ready for use.
 
 .sp
 .ne 2
-.mk
 .na
 \fBunknown\fR
 .ad
@@ -297,7 +287,6 @@ This condition does not apply to a HCA attachment point.
 
 .sp
 .ne 2
-.mk
 .na
 \fBunusable\fR
 .ad
@@ -312,7 +301,6 @@ Not used.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIfunction\fR\fR
 .ad
@@ -325,7 +313,6 @@ points (that is, the HCA ap_ids and the IB static \fBib\fR ap_id).
 The following generic commands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fBconfigure\fR
 .ad
@@ -336,7 +323,6 @@ Configure the IB device to be used by Solaris.
 
 .sp
 .ne 2
-.mk
 .na
 \fBunconfigure\fR
 .ad
@@ -350,7 +336,6 @@ Unconfigure the IB device. If successful, \fBcfgadm\fR reports the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -361,7 +346,6 @@ Not supported.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIap_id\fR\fR
 .ad
@@ -372,7 +356,6 @@ Obtain IB specific help for an IB attachment point.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
@@ -412,7 +395,6 @@ of its ports. See \fBEXAMPLES\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIhardware_option\fR\fR
 .ad
@@ -423,7 +405,6 @@ This option is not currently defined.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIlisting_option\fR\fR
 .ad
@@ -435,7 +416,6 @@ Refer to the \fBcfgadm\fR(1M) man page for more information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fIhardware_function\fR\fR
 .ad
@@ -447,7 +427,6 @@ than 4 characters long.
 The following hardware specific functions are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadd_service\fR
 \fB-ocomm\fR\fB=[port|vppa|hca_svc],service=\fR\fIname\fR\fR
@@ -466,7 +445,6 @@ the \fBname\fR service to either \fBport-svc-list\fR or to the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelete_service\fR
 \fB-ocomm\fR\fB=[port|vppa|hca_svc],service=\fR\fIname\fR\fR
@@ -484,7 +462,6 @@ service from the \fBport-svc-list\fR, \fBvppa-svc-list\fR, or
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist_clients\fR\fR
 .ad
@@ -503,7 +480,6 @@ displayed in that column.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist_services\fR\fR
 .ad
@@ -516,7 +492,6 @@ point only. It lists all the Port and VPPA services as read from the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunconfig_clients\fR\fR
 .ad
@@ -530,7 +505,6 @@ Only IB kernel clients that do not have an alternate HCA are unconfigured. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBupdate_ioc_config\fR\fR
 .ad
@@ -548,7 +522,6 @@ See \fBib\fR(7D).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBupdate_pkey_tbls\fR\fR
 .ad
@@ -610,7 +583,7 @@ The following command lists the verbose status of a IB VPPA device:
 .sp
 .in +2
 .nf
-example# cfgadm -alv ib::80245678,ffff,ipib      
+example# cfgadm -alv ib::80245678,ffff,ipib
 Ap_Id                   Receptacle Occupant   Condition Information
 When         Type     Busy  Phys_Id
 ib::80245678,ffff,ipib    connected    configured   ok        ipib
@@ -686,7 +659,7 @@ The following command displays only IB ap_ids. The output only includes the
 .sp
 .in +2
 .nf
- 
+
 # cfgadm -al -s "cols=ap_id:info"  ib::80245678,ffff,ipib
 Ap_Id                                Information
 ib::80245678,ffff,ipib               ipib
@@ -705,7 +678,7 @@ The following command unconfigures the IB IOC attached to
 .in +2
 .nf
 # cfgadm -c unconfigure ib::80020123456789a
-Unconfigure the device: /devices/ib:fabric::80020123456789a 
+Unconfigure the device: /devices/ib:fabric::80020123456789a
 This operation will suspend activity on the IB device
 Continue (yes/no)?
 .fi
@@ -719,7 +692,7 @@ Enter: \fBy\fR
 .sp
 .in +2
 .nf
-IB device unconfigured successfully. 
+IB device unconfigured successfully.
 # cfgadm -al ib::80020123456789a
 Ap_Id                  Type      Receptacle  Occupant     Condition
 ib::80020123456789     IB-IOC    connected   unconfigured unknown
@@ -746,7 +719,7 @@ The following series of commands configures an IB device attached to
 # cfgadm -yc configure ib::80020123456789a
 # cfgadm -al ib::80020123456789a
 Ap_Id                  Type        Receptacle   Occupant     Condition
-ib::80020123456789a    IB-IOC      connected    configured   ok       
+ib::80020123456789a    IB-IOC      connected    configured   ok
 .fi
 .in -2
 .sp
@@ -864,7 +837,6 @@ The following command unconfigures all kernel clients of a HCA
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/cfgadm/ib.so.1\fR\fR
 .ad
diff --git a/usr/src/man/man1m/cfgadm_pci.1m b/usr/src/man/man1m/cfgadm_pci.1m
index efe0ae2f11..875b7e7a0b 100644
--- a/usr/src/man/man1m/cfgadm_pci.1m
+++ b/usr/src/man/man1m/cfgadm_pci.1m
@@ -3,27 +3,27 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH cfgadm_pci 1M "13 Jun 2008" "SunOS 5.11" "System Administration Commands"
+.TH CFGADM_PCI 1M "Jun 13, 2008"
 .SH NAME
 cfgadm_pci \- PCI, CompactPCI, and PCI Express Hotplug hardware specific
 commands for cfgadm
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/cfgadm\fR [\fB-f\fR] [\fB-y\fR | \fB-n\fR] [\fB-v\fR] 
+\fB/usr/sbin/cfgadm\fR [\fB-f\fR] [\fB-y\fR | \fB-n\fR] [\fB-v\fR]
      [\fB-o\fR \fIhardware_options\fR] \fB-c\fR \fIfunction\fR \fIap_id\fR [\fIap_id\fR]
 .fi
 
 .LP
 .nf
-\fB/usr/sbin/cfgadm\fR [\fB-f\fR] [\fB-y\fR | \fB-n\fR] [\fB-v\fR] 
-     [\fB-o\fR \fIhardware_options\fR] \fB-x\fR \fIhardware_function\fR \fIap_id\fR 
+\fB/usr/sbin/cfgadm\fR [\fB-f\fR] [\fB-y\fR | \fB-n\fR] [\fB-v\fR]
+     [\fB-o\fR \fIhardware_options\fR] \fB-x\fR \fIhardware_function\fR \fIap_id\fR
      [\fIap_id\fR]
 .fi
 
 .LP
 .nf
-\fB/usr/sbin/cfgadm\fR [\fB-v\fR] [\fB-s\fR \fIlisting_options\fR] 
+\fB/usr/sbin/cfgadm\fR [\fB-v\fR] [\fB-s\fR \fIlisting_options\fR]
      [\fB-o\fR \fIhardware_options\fR] [\fB-l\fR [\fIap_id\fR | \fIap_type\fR]]
 .fi
 
@@ -34,7 +34,7 @@ commands for cfgadm
 
 .LP
 .nf
-\fB/usr/sbin/cfgadm\fR [\fB-v\fR] [\fB-o\fR \fIhardware_function\fR] \fB-h\fR 
+\fB/usr/sbin/cfgadm\fR [\fB-v\fR] [\fB-o\fR \fIhardware_function\fR] \fB-h\fR
      [\fIap_id\fR| \fIap_type\fR]
 .fi
 
@@ -90,17 +90,17 @@ Grammar:
    absolute-slot-path : \fIslot-path\fR[\fI:slot-path\fR[\fI:slotpath\fR ...]]
 
    slot-path : [\fIfru-id\fR.]\fIslot-id\fR
-           where \fIfru-id\fR indicates the chassis FRU, if any, 
+           where \fIfru-id\fR indicates the chassis FRU, if any,
            containing the \fIslot-id\fR
 
    fru-id : \fIfru-type\fR[\fIserialid#\fR]
-           where \fIfru-type\fR is "iob" for PCI Express expansion 
+           where \fIfru-type\fR is "iob" for PCI Express expansion
            chassis, followed by its serial number \fIserialid#\fR,
            if available
 
     slot-id: \fIslot-name\fR | \fIdevice-type\fR \fIphysical-slot#\fR |\e
             \fInexus-driver-name\fR \fInexus-driver-instance\fR.\e
-            \fIdevice-type\fR \fIpci-device-number\fR         
+            \fIdevice-type\fR \fIpci-device-number\fR
 .fi
 .in -2
 .sp
@@ -137,7 +137,6 @@ branded expansion chassis.
 Each \fIslot-id\fR consists of one of three possible forms:
 .sp
 .ne 2
-.mk
 .na
 \fBslot-id form (1)\fR
 .ad
@@ -148,7 +147,6 @@ Each \fIslot-id\fR consists of one of three possible forms:
 
 .sp
 .ne 2
-.mk
 .na
 \fBslot-id form (2)\fR
 .ad
@@ -159,7 +157,6 @@ Each \fIslot-id\fR consists of one of three possible forms:
 
 .sp
 .ne 2
-.mk
 .na
 \fBslot-id form (3)\fR
 .ad
@@ -217,7 +214,6 @@ Lastly, the final form of the actual \fIap_id\fR name used in \fBcfgadm\fR is
 decided as follows, specified in order of precedence:
 .sp
 .ne 2
-.mk
 .na
 \fBap_id form (1)\fR
 .ad
@@ -229,7 +225,6 @@ if the \fIabsolute-slot-path\fR can fit within the fixed length limit of
 
 .sp
 .ne 2
-.mk
 .na
 \fBap_id form (2)\fR
 .ad
@@ -244,7 +239,6 @@ unique \fIap_id\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBap_id form (3)\fR
 .ad
@@ -274,7 +268,6 @@ See the EXAMPLES section for a list of hotpluggable examples.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIfunction\fR\fR
 .ad
@@ -283,7 +276,6 @@ The following options are supported:
 The following \fIfunction\fRs are supported for PCI hot pluggable slots:
 .sp
 .ne 2
-.mk
 .na
 \fBconfigure\fR
 .ad
@@ -294,7 +286,6 @@ Configure the PCI device in the slot to be used by Solaris.
 
 .sp
 .ne 2
-.mk
 .na
 \fBconnect\fR
 .ad
@@ -305,7 +296,6 @@ Connect the slot to PCI bus.
 
 .sp
 .ne 2
-.mk
 .na
 \fBdisconnect\fR
 .ad
@@ -316,7 +306,6 @@ Disconnect the slot from the PCI bus.
 
 .sp
 .ne 2
-.mk
 .na
 \fBinsert\fR
 .ad
@@ -327,7 +316,6 @@ Not supported.
 
 .sp
 .ne 2
-.mk
 .na
 \fBremove\fR
 .ad
@@ -338,7 +326,6 @@ Not supported.
 
 .sp
 .ne 2
-.mk
 .na
 \fBunconfigure\fR
 .ad
@@ -351,7 +338,6 @@ Logically remove the PCI device's resources from the system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -362,7 +348,6 @@ Not supported.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIap_id\fR | \fIap_type\fR\fR
 .ad
@@ -373,7 +358,6 @@ Print out PCI hot plug specific help message.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlist\fR\fR
 .ad
@@ -384,7 +368,6 @@ List the values of PCI Hot Plug slots.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIhardware_options\fR\fR
 .ad
@@ -395,7 +378,6 @@ No hardware specific options are currently defined.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIlisting_options\fR\fR
 .ad
@@ -406,7 +388,6 @@ Same as the generic \fBcfgadm\fR(1M).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fIap_id\fR\fR
 .ad
@@ -418,7 +399,6 @@ the slot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -440,7 +420,6 @@ field is printed with or without the \fB-v\fR option. The occupant \fBType\fR
 field will describe the contents of the slot. There are 2 possible values:
 .sp
 .ne 2
-.mk
 .na
 \fBunknown\fR
 .ad
@@ -452,7 +431,6 @@ there is no driver for the device on the card.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsubclass\fR/\fIboard\fR\fR
 .ad
@@ -480,7 +458,6 @@ semi-transparent PCI bridge.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fIhardware_function\fR\fR
 .ad
@@ -492,7 +469,6 @@ not normally change the state of a receptacle or occupant.
 The following \fIhardware_functions\fR are supported:
 .sp
 .ne 2
-.mk
 .na
 \fBenable_slot | disable_slot\fR
 .ad
@@ -511,7 +487,6 @@ unusable.
 
 .sp
 .ne 2
-.mk
 .na
 \fBenable_autoconfig | disable_autoconfig\fR
 .ad
@@ -532,7 +507,6 @@ cannot be used to configure the occupant of the slot.
 
 .sp
 .ne 2
-.mk
 .na
 \fBled=[\fIled_sub_arg\fR],mode=[\fImode_sub_arg\fR]\fR
 .ad
@@ -553,7 +527,7 @@ Changing the state of the LED does not change the state of the receptacle or
 occupant. Normally, the LEDs are controlled by the hot plug controller, no user
 intervention is necessary. Use this command for testing purposes.
 .sp
-\fBCaution:\fR Changing the state of the LED can misrepresent	 the state of
+\fBCaution:\fR Changing the state of the LED can misrepresent the state of
 occupant or receptacle.
 .sp
 The following command prints the values of LEDs:
@@ -671,7 +645,7 @@ The change can be verified by entering the following command:
 .sp
 .in +2
 .nf
-example# \fBcfgadm cpci_slot4\fR 
+example# \fBcfgadm cpci_slot4\fR
 
 
 Ap_Id                   Type         Receptacle   Occupant     Condition
@@ -700,7 +674,7 @@ The change can be verifed by entering the following command:
 .sp
 .in +2
 .nf
-example# \fBcfgadm cpci_slot4\fR 
+example# \fBcfgadm cpci_slot4\fR
 
 
 Ap_Id                   Type         Receptacle   Occupant     Condition
@@ -751,7 +725,6 @@ derived from the platform through the "slot-names" property.
 
 .sp
 .ne 2
-.mk
 .na
 \fBSlot iou#0-pci#0\fR
 .ad
@@ -762,7 +735,6 @@ this slot is empty or its occupant is unconfigured
 
 .sp
 .ne 2
-.mk
 .na
 \fBSlot iou#0-pci#1\fR
 .ad
@@ -776,7 +748,6 @@ expansion chassis in this case does not have or exports a \fIserial-id\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBSlot iou#0-pci#2\fR
 .ad
@@ -791,7 +762,6 @@ the platform, hardware or firmware.
 
 .sp
 .ne 2
-.mk
 .na
 \fBSlot iou#0-pci#3\fR
 .ad
@@ -842,7 +812,7 @@ that are lacking in certain device properties:
 .in +2
 .nf
 example# \fBcfgadm -s cols=ap_id:info\fR
-  
+
 Ap_Id                          Information
 px_pci7.pcie0                  Location: px_pci7.pcie0
 px_pci11.pcie0                 Location: px_pci11.pcie0
@@ -883,16 +853,16 @@ paths exceeding the \fIApId\fR field length limit:
 .in +2
 .nf
 example# \fBcfgadm -s cols=ap_id:info\fR
- 
+
 Ap_Id                          Information
 pcie4                          Location: pcie4
 pcie4:iobSUNW.pcie1            Location: pcie4/iobSUNW.pcie1
 pcie4:iobSUNW.pcie2            Location: pcie4/iobSUNW.pcie2
-iob8879c3f3.pci1               
+iob8879c3f3.pci1
                    Location: pcie4/iobSUNW.pcie2/iob8879c3f3.pci1
-iob8879c3f3.pci2               
+iob8879c3f3.pci2
                    Location: pcie4/iobSUNW.pcie2/iob8879c3f3.pci2
-iob8879c3f3.pci3               
+iob8879c3f3.pci3
                    Location: pcie4/iobSUNW.pcie2/iob8879c3f3.pci3
 .fi
 .in -2
@@ -930,9 +900,9 @@ example# \fBcfgadm -s cols=ap_id:info\fR
 Ap_Id                          Information
 pcie4                          Location: pcie4
 pcie4:iob4567812345678.pcie3   Location: pcie4/iob4567812345678.pcie3
-px_pci20.pcie0                 
+px_pci20.pcie0
                    Location: pcie4/iob4567812345678.pcie3/iob.pcie1
-px_pci21.pcie0                       
+px_pci21.pcie0
                    Location: pcie4/iob4567812345678.pcie3/iob.pcie2
 .fi
 .in -2
@@ -967,7 +937,6 @@ bound to driver instance 21 of "px_pci"
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB/usr/lib/cfgadm/pci.so.1\fR
 .ad
diff --git a/usr/src/man/man1m/cfgadm_sata.1m b/usr/src/man/man1m/cfgadm_sata.1m
index f7541eae4e..a77b9f177c 100644
--- a/usr/src/man/man1m/cfgadm_sata.1m
+++ b/usr/src/man/man1m/cfgadm_sata.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH cfgadm_sata 1M "27 Aug 2007" "SunOS 5.11" "System Administration Commands"
+.TH CFGADM_SATA 1M "Aug 27, 2007"
 .SH NAME
 cfgadm_sata \- SATA hardware-specific commands for cfgadm
 .SH SYNOPSIS
@@ -21,7 +21,7 @@ cfgadm_sata \- SATA hardware-specific commands for cfgadm
 
 .LP
 .nf
-\fB/usr/sbin/cfgadm\fR [\fB-v\fR] [\fB-a\fR] [\fB-s\fR \fIlisting_options\fR] 
+\fB/usr/sbin/cfgadm\fR [\fB-v\fR] [\fB-a\fR] [\fB-s\fR \fIlisting_options\fR]
      [\fB-o\fR \fIhardware_options\fR] [\fB-l\fR [\fIap_id\fR | \fIap_type\fR]...]
 .fi
 
@@ -66,34 +66,28 @@ sataX/P[.M][::dsk/cXtYd0]
 where
 .sp
 .ne 2
-.mk
 .na
 \fBX\fR
 .ad
 .RS 14n
-.rt  
 is the \fBSATA\fR controller number
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBP\fR
 .ad
 .RS 14n
-.rt  
 is the \fBSATA\fR controller's device port number (0 to 31)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBM\fR
 .ad
 .RS 14n
-.rt  
 is the port multiplier's device port number (0 to 14) the port multiplier host
 port number (15). It is used only when the port multiplier is attached to the
 \fBSATA\fR controller's device port.
@@ -101,23 +95,19 @@ port number (15). It is used only when the port multiplier is attached to the
 
 .sp
 .ne 2
-.mk
 .na
 \fBdev/cXtYd0\fR
 .ad
 .RS 14n
-.rt  
 identifies the attached \fBSATA\fR device
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBY\fR
 .ad
 .RS 14n
-.rt  
 is a target number
 .RE
 
@@ -191,24 +181,20 @@ The receptacle state for attachment point at the \fBSATA\fR port have the
 following meanings:
 .sp
 .ne 2
-.mk
 .na
 \fBempty\fR
 .ad
 .RS 16n
-.rt  
 The \fBSATA\fR port is powered-on and enabled. No device presence was detected
 on this port.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBdisconnected\fR
 .ad
 .RS 16n
-.rt  
 The \fBSATA\fR port is not enabled or the \fBSATA\fR device presence was
 detected but no communication with the device was established, or the port has
 failed.
@@ -216,12 +202,10 @@ failed.
 
 .sp
 .ne 2
-.mk
 .na
 \fBconnected\fR
 .ad
 .RS 16n
-.rt  
 The \fBSATA\fR device is detected on the port the communication with the device
 is established.
 .RE
@@ -232,24 +216,20 @@ The occupant (device attached to the \fBSATA\fR port) state have the following
 meanings:
 .sp
 .ne 2
-.mk
 .na
 \fBconfigured\fR
 .ad
 .RS 16n
-.rt  
 The attached \fBSATA\fR device is configured and ready to use by the operating
 system.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBunconfigured\fR
 .ad
 .RS 16n
-.rt  
 No device is attached, or the \fBSATA\fR device attached to the \fBSATA\fR port
 was not yet configured. To configure it, run the command "\fBcfgadm -c
 configure ap_id\fR".
@@ -260,23 +240,19 @@ configure ap_id\fR".
 The attachment point (\fBSATA\fR port) condition have the following meanings:
 .sp
 .ne 2
-.mk
 .na
 \fBok\fR
 .ad
 .RS 11n
-.rt  
 The \fBSATA\fR port is powered-on and enabled, and is ready for use.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBfailed\fR
 .ad
 .RS 11n
-.rt  
 The \fBSATA\fR port failed. It may be disabled and/or powered-off by the
 system. It is unusable and its condition is unknown. It may be due to the
 device plugged-in.
@@ -284,12 +260,10 @@ device plugged-in.
 
 .sp
 .ne 2
-.mk
 .na
 \fBunknown\fR
 .ad
 .RS 11n
-.rt  
 The \fBSATA\fR port is disabled and its condition is unknown.
 .RE
 
@@ -300,7 +274,6 @@ occupant state, and an attachment point (\fBSATA\fR port) condition. The valid
 states are:
 .sp
 .ne 2
-.mk
 .na
 \fBempty/unconfigured/ok\fR
 .ad
@@ -311,7 +284,6 @@ The \fBSATA\fR port is enabled and active. No device presence was detected.
 
 .sp
 .ne 2
-.mk
 .na
 \fBdisconnected/unconfigured/ok\fR
 .ad
@@ -323,7 +295,6 @@ communications with the device was established.
 
 .sp
 .ne 2
-.mk
 .na
 \fBdisconnected/unconfigured/unknown\fR
 .ad
@@ -334,7 +305,6 @@ The \fBSATA\fR Port is disabled and its condition is unknown.
 
 .sp
 .ne 2
-.mk
 .na
 \fBdisconnected/unconfigured/failed\fR
 .ad
@@ -346,7 +316,6 @@ system due to a system-detected failure.
 
 .sp
 .ne 2
-.mk
 .na
 \fBconnected/unconfigured/ok\fR
 .ad
@@ -359,7 +328,6 @@ to be used by the \fBOS\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBconnected/configured/ok\fR
 .ad
@@ -377,7 +345,6 @@ changes, (\fB-c\fR), invoking hardware specific functions (\fB-x\fR), and
 obtaining configuration administration help messages (\fB-h\fR).
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIfunction\fR\fR
 .ad
@@ -388,7 +355,6 @@ specific library. For \fBSATA\fR port attachment point, the following
 configuration state change operations are supported:
 .sp
 .ne 2
-.mk
 .na
 \fBconnect\fR
 .ad
@@ -400,7 +366,6 @@ attached device. This operation implies powering-on the port if necessary.
 
 .sp
 .ne 2
-.mk
 .na
 \fBdisconnect\fR
 .ad
@@ -416,24 +381,20 @@ For a \fBSATA\fR device attached to the \fBSATA\fR port following state change
 operations are supported:
 .sp
 .ne 2
-.mk
 .na
 \fBconfigure\fR
 .ad
 .RS 15n
-.rt  
 Configure new device for use by the operating system if it is not already
 configured. This command also implies connect operation, if necessary.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBunconfigure\fR
 .ad
 .RS 15n
-.rt  
 Unconfigure the device connected to the \fBSATA\fR port if it is not already
 unconfigured.
 .RE
@@ -447,7 +408,6 @@ multiplier's device ports.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -458,7 +418,6 @@ Not supported.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIap_id\fR\fR
 .ad
@@ -470,7 +429,6 @@ Not supported.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR [\fB-v\fR]\fR
 .ad
@@ -501,7 +459,6 @@ No: product Serial Number
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIhardware_options\fR\fR
 .ad
@@ -512,7 +469,6 @@ No hardware specific options are currently defined.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIlisting_options\fR\fR
 .ad
@@ -524,7 +480,6 @@ suboption. See \fBcfgadm\fR(1M).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fIap_id\fR\fR
 .ad
@@ -537,7 +492,6 @@ controller, an error message is issued.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fIhardware_function\fR\fR
 .ad
@@ -554,7 +508,6 @@ message is issued and the operation is not performed. An error message will be
 also issued if the \fBSATA\fR controller does not support specified operation.
 .sp
 .ne 2
-.mk
 .na
 \fBsata_reset_device ap_id\fR
 .ad
@@ -566,7 +519,6 @@ Reset the \fBSATA\fR device attached to \fBap_id\fR \fBSATA\fR port. The
 
 .sp
 .ne 2
-.mk
 .na
 \fBsata_reset_port ap_id\fR
 .ad
@@ -581,7 +533,6 @@ the port multiplier may not be reset
 
 .sp
 .ne 2
-.mk
 .na
 \fBsata_reset_all ap_id\fR
 .ad
@@ -598,7 +549,6 @@ operation. Any newly enumerated devices will be left unconfigured.
 
 .sp
 .ne 2
-.mk
 .na
 \fBsata_port_deactivate ap_id\fR
 .ad
@@ -610,7 +560,6 @@ emergency step; use with caution.
 
 .sp
 .ne 2
-.mk
 .na
 \fBsata_port_activate ap_id\fR
 .ad
@@ -622,7 +571,6 @@ port which was deactivated to recover from errors.
 
 .sp
 .ne 2
-.mk
 .na
 \fBsata_port_self_test ap_id\fR
 .ad
@@ -636,7 +584,6 @@ implies unconfiguring all devices and resetting the \fBSATA\fR controller.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -686,19 +633,19 @@ unconfigured/ok   -c disconnect   error message, no state change
 
 disconnected/
 unconfigured/
-unknown 
+unknown
 (no disk plugged) -c configure    error message, state change to
                                   empty/unconfigured/ok, or
                                   disconnected/unconfigured/failed
-       
+
 disconnected/
 unconfigured/
-unknown           -c configure    state change to 
+unknown           -c configure    state change to
 (disk plugged)                    connected/configured/ok or,
                                   connected/unconfigured/ok, or
                                   disconnected/unconfigured/failed and
                                   possible error message
-       
+
 disconnected/
 unconfigured/
 unknown           -c connect      empty/unconfigured/ok, or
@@ -733,7 +680,7 @@ unconfigured/ok   -c unconfigure  error message, no state change
 
 connected/
 unconfigured/ok   -c connect      error message, no state change
-       
+
 connected/
 unconfigured/ok   -c disconnect   disconnected/unconfigured/unknown, or
                                   disconnected/unconfigured/failed
@@ -842,12 +789,10 @@ cfgadm: Component system is busy, try again: failed to offline:
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB/usr/lib/cfgadm/sata.so.1\fR
 .ad
 .RS 29n
-.rt  
 Hardware specific library for generic \fBSATA\fR hot plugging.
 .RE
 
diff --git a/usr/src/man/man1m/cfgadm_sbd.1m b/usr/src/man/man1m/cfgadm_sbd.1m
index e792f32593..3abd85cd38 100644
--- a/usr/src/man/man1m/cfgadm_sbd.1m
+++ b/usr/src/man/man1m/cfgadm_sbd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH cfgadm_sbd 1M "13 Oct 2003" "SunOS 5.11" "System Administration Commands"
+.TH CFGADM_SBD 1M "Oct 13, 2003"
 .SH NAME
 cfgadm_sbd \- \fBcfgadm\fR commands for system board administration
 .SH SYNOPSIS
@@ -14,7 +14,7 @@ cfgadm_sbd \- \fBcfgadm\fR commands for system board administration
 
 .LP
 .nf
-\fBcfgadm \fR \fB-c \fR \fIfunction\fR [\fB-f\fR] [\fB-y\fR | \fB-n\fR] 
+\fBcfgadm \fR \fB-c \fR \fIfunction\fR [\fB-f\fR] [\fB-y\fR | \fB-n\fR]
      [\fB-o\fR unassign | nopoweroff] [\fB-v\fR] \fI ap_id\fR...
 .fi
 
@@ -56,34 +56,28 @@ platform. See the \fBPlatform Notes\fR section for more information.
 The following are the names and descriptions of the component conditions:
 .sp
 .ne 2
-.mk
 .na
 \fBfailed\fR
 .ad
 .RS 11n
-.rt  
 The component failed testing.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBok\fR
 .ad
 .RS 11n
-.rt  
 The component is operational.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBunknown\fR
 .ad
 .RS 11n
-.rt  
 The component has not been tested.
 .RE
 
@@ -94,12 +88,10 @@ The following is the name and description of the receptacle state for
 components:
 .sp
 .ne 2
-.mk
 .na
 \fBconnected\fR
 .ad
 .RS 13n
-.rt  
 The component is connected to the board slot.
 .RE
 
@@ -109,23 +101,19 @@ The following are the names and descriptions of the occupant states for
 components:
 .sp
 .ne 2
-.mk
 .na
 \fBconfigured\fR
 .ad
 .RS 16n
-.rt  
 The component is available for use by the Solaris operating environment.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBunconfigured\fR
 .ad
 .RS 16n
-.rt  
 The component is not available for use by the Solaris operating environment.
 .RE
 
@@ -135,45 +123,37 @@ The component is not available for use by the Solaris operating environment.
 The following are the names and descriptions of the board conditions.
 .sp
 .ne 2
-.mk
 .na
 \fBfailed\fR
 .ad
 .RS 12n
-.rt  
 The board failed testing.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBok\fR
 .ad
 .RS 12n
-.rt  
 The board is operational.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBunknown\fR
 .ad
 .RS 12n
-.rt  
 The board has not been tested.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBunusable\fR
 .ad
 .RS 12n
-.rt  
 The board slot is unusable.
 .RE
 
@@ -193,24 +173,20 @@ The following are the names and descriptions of the receptacle states for
 boards:
 .sp
 .ne 2
-.mk
 .na
 \fBconnected\fR
 .ad
 .RS 16n
-.rt  
 The board is powered on and connected to the system bus. You can view the
 components on a board only after it is in the connected state.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBdisconnected\fR
 .ad
 .RS 16n
-.rt  
 The board is disconnected from the system bus. A board can be in the
 disconnected state without being powered off. However, a board must be powered
 off and in the disconnected state before you remove it from the slot.
@@ -218,12 +194,10 @@ off and in the disconnected state before you remove it from the slot.
 
 .sp
 .ne 2
-.mk
 .na
 \fBempty\fR
 .ad
 .RS 16n
-.rt  
 A board is not present.
 .RE
 
@@ -234,23 +208,19 @@ following table contains the names and descriptions of the occupant states for
 boards:
 .sp
 .ne 2
-.mk
 .na
 \fBconfigured\fR
 .ad
 .RS 16n
-.rt  
 At least one component on the board is configured.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBunconfigured\fR
 .ad
 .RS 16n
-.rt  
 All of the components on the board are unconfigured.
 .RE
 
@@ -412,7 +382,7 @@ SB0           CPU       connected      configured     y
 SB0::memory   memory    connected      configured     y
 SB1           CPU       connected      configured     y
 SB1::memory   memory    connected      configured     y
- 
+
 .fi
 .in -2
 .sp
@@ -426,11 +396,11 @@ following example.
 .in +2
 .nf
 Ap_Id         Type      Receptacle     Occupant       Busy
-SB0           CPU       connected      configured     y 
-SB0::memory   memory    connected      configured     y 
-SB1           CPU       connected      configured     y 
-SB1::memory   memory    connected      unconfigured   n 
-  
+SB0           CPU       connected      configured     y
+SB0::memory   memory    connected      configured     y
+SB1           CPU       connected      configured     y
+SB1::memory   memory    connected      unconfigured   n
+
 .fi
 .in -2
 .sp
@@ -445,11 +415,11 @@ the process, only board 0 remains busy, as in the following example.
 .in +2
 .nf
 Ap_Id         Type      Receptacle     Occupant       Busy
-SB0           CPU       connected      configured     y 
-SB0::memory   memory    connected      unconfigured   n 
-SB1           CPU       connected      configured     n 
-SB1::memory   memory    connected      configured     n 
-  
+SB0           CPU       connected      configured     y
+SB0::memory   memory    connected      unconfigured   n
+SB1           CPU       connected      configured     n
+SB1::memory   memory    connected      configured     n
+
 .fi
 .in -2
 .sp
@@ -463,11 +433,11 @@ example.
 .in +2
 .nf
 Ap_Id         Type      Receptacle     Occupant       Busy
-SB0           CPU       connected      configured     n 
-SB0::memory   memory    connected      unconfigured   n 
-SB1           CPU       connected      configured     n 
-SB1::memory   memory    connected      configured     n 
-  
+SB0           CPU       connected      configured     n
+SB0::memory   memory    connected      unconfigured   n
+SB1           CPU       connected      configured     n
+SB1::memory   memory    connected      configured     n
+
 .fi
 .in -2
 .sp
@@ -496,21 +466,17 @@ those options. The following options are supported by the \fBcfgadm_sbd\fR
 plugin:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c \fR\fIfunction\fR\fR
 .ad
 .RS 15n
-.rt  
 Performs a state change function. You can use the following functions:
 .sp
 .ne 2
-.mk
 .na
 \fBunconfigure\fR
 .ad
 .RS 15n
-.rt  
 Changes the occupant state to unconfigured. This function applies to system
 board slots and to all of the components on the system board.
 .sp
@@ -542,12 +508,10 @@ deleted memory is returned to the system memory pool.
 
 .sp
 .ne 2
-.mk
 .na
 \fBdisconnect\fR
 .ad
 .RS 15n
-.rt  
 Changes the receptacle state to disconnected. This function applies only to
 system board slots.
 .sp
@@ -569,12 +533,10 @@ from which is was unassigned.
 
 .sp
 .ne 2
-.mk
 .na
 \fBconfigure\fR
 .ad
 .RS 15n
-.rt  
 Changes the occupant state to configured. This function applies to system board
 slots and to any components on the system board.
 .sp
@@ -596,12 +558,10 @@ before the devices can be used. See \fBifconfig\fR(1M) and \fBmount\fR(1M).
 
 .sp
 .ne 2
-.mk
 .na
 \fBconnect\fR
 .ad
 .RS 15n
-.rt  
 Changes the receptacle state to connected. This function applies only to system
 board slots.
 .sp
@@ -622,12 +582,10 @@ domains.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 15n
-.rt  
 Overrides software state changing constraints.
 .sp
 The \fB-f\fR option never overrides fundamental safety and availability
@@ -636,12 +594,10 @@ constraints of the hardware and operating system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 15n
-.rt  
 Lists the state and condition of attachment points specified in the format
 controlled by the \fB-s\fR, \fB-v\fR, and \fB-a\fR options as specified in
 \fBcfgadm\fR(1M). The \fBcfgadm_sbd\fR plugin provides specific information in
@@ -651,21 +607,17 @@ altered by the \fB\fR\fB-o\fR\fB parsable\fR option.
 The parsable \fBinfo\fR field is composed of the following:
 .sp
 .ne 2
-.mk
 .na
 \fBcpu\fR
 .ad
 .RS 10n
-.rt  
 The \fBcpu\fR type displays the following information:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcpuid=\fR\fI#\fR\fB[,\fR\fI#\fR\fB\&.\|.\|.]\fR\fR
 .ad
 .RS 24n
-.rt  
 Where \fI#\fR is a number, and represents the \fBID\fR of the \fBCPU\fR. If
 more than one \fI#\fR is present, this \fBCPU\fR has multiple active virtual
 processors.
@@ -673,24 +625,20 @@ processors.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBspeed=\fR\fI#\fR\fR
 .ad
 .RS 24n
-.rt  
 Where \fI#\fR is a number and represents the speed of the \fBCPU\fR in
 \fBMHz\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBecache=\fR\fI#\fR\fR
 .ad
 .RS 24n
-.rt  
 Where \fI#\fR is a number and represents the size of the ecache in MBytes. If
 the \fBCPU\fR has multiple active virtual processors, the ecache could either
 be shared among the virtual processors, or divided between them.
@@ -700,111 +648,91 @@ be shared among the virtual processors, or divided between them.
 
 .sp
 .ne 2
-.mk
 .na
 \fBmemory\fR
 .ad
 .RS 10n
-.rt  
 The \fBmemory\fR type displays the following information, as appropriate:
 .sp
 .ne 2
-.mk
 .na
 \fBaddress=\fI#\fR\fR
 .ad
 .RS 26n
-.rt  
 Where \fI#\fR is a number, representing the base physical address.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBsize=\fI#\fR\fR
 .ad
 .RS 26n
-.rt  
 Where \fI#\fR is a number, representing the size of the memory in \fBKBytes\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBpermanent=\fI#\fR\fR
 .ad
 .RS 26n
-.rt  
 Where \fI#\fR is a number, representing the size of permanent memory in
 \fBKBytes\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBunconfigurable\fR
 .ad
 .RS 26n
-.rt  
 An operating system setting that prevents the memory from being unconfigured.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBinter-board-interleave\fR
 .ad
 .RS 26n
-.rt  
 The board is participating in interleaving with other boards.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBsource=\fIap_id\fR\fR
 .ad
 .RS 26n
-.rt  
 Represents the source attachment point.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBtarget=\fIap_id\fR\fR
 .ad
 .RS 26n
-.rt  
 Represents the target attachment point.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBdeleted=\fI#\fR\fR
 .ad
 .RS 26n
-.rt  
 Where \fI#\fR is a number, representing the amount of memory that has already
 been deleted in \fBKBytes\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBremaining=\fI#\fR\fR
 .ad
 .RS 26n
-.rt  
 Where \fI#\fR is a number, representing the amount of memory to be deleted in
 \fBKBytes\fR.
 .RE
@@ -813,32 +741,26 @@ Where \fI#\fR is a number, representing the amount of memory to be deleted in
 
 .sp
 .ne 2
-.mk
 .na
 \fBio\fR
 .ad
 .RS 10n
-.rt  
 The \fBio\fR type displays the following information:
 .sp
 .ne 2
-.mk
 .na
 \fBdevice=\fIpath\fR\fR
 .ad
 .RS 15n
-.rt  
 Represents the physical path to the I/O component.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBreferenced\fR
 .ad
 .RS 15n
-.rt  
 The I/O component is referenced.
 .RE
 
@@ -846,33 +768,27 @@ The I/O component is referenced.
 
 .sp
 .ne 2
-.mk
 .na
 \fBboard\fR
 .ad
 .RS 10n
-.rt  
 The \fBboard\fR type displays the following boolean names. If they are not
 present, then the opposite applies.
 .sp
 .ne 2
-.mk
 .na
 \fBassigned\fR
 .ad
 .RS 14n
-.rt  
 The board is assigned to the domain.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBpowered-on\fR
 .ad
 .RS 14n
-.rt  
 The board is powered on.
 .RE
 
@@ -884,12 +800,10 @@ The same items appear in the \fBinfo\fR field in a more readable format if the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR parsable\fR
 .ad
 .RS 15n
-.rt  
 Returns the information in the \fBinfo\fR field as a boolean \fIname\fR or a
 set of \fBname=value\fR pairs, separated by a space character.
 .sp
@@ -900,12 +814,10 @@ option. See the \fBcfgadm\fR(1M) man page for more information about the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
 .RS 15n
-.rt  
 Tests the board.
 .sp
 Before a board can be connected, it must pass the appropriate level of testing.
@@ -920,21 +832,17 @@ board be tested.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fI function\fR\fR
 .ad
 .RS 15n
-.rt  
 Performs an sbd-class function. You can use the following functions:
 .sp
 .ne 2
-.mk
 .na
 \fBassign\fR
 .ad
 .RS 12n
-.rt  
 Assigns a board to a domain.
 .sp
 The receptacle state must be disconnected or empty. The board must also be
@@ -943,12 +851,10 @@ listed in the domain available component list. See Dynamic System Domains.
 
 .sp
 .ne 2
-.mk
 .na
 \fBunassign\fR
 .ad
 .RS 12n
-.rt  
 Unassigns a board from a domain.
 .sp
 The receptacle state must be disconnected or empty. The board must also be
@@ -957,12 +863,10 @@ listed in the domain available component list. See Dynamic System Domains.
 
 .sp
 .ne 2
-.mk
 .na
 \fBpoweron\fR
 .ad
 .RS 12n
-.rt  
 Powers the system board on.
 .sp
 The receptacle state must be disconnected.
@@ -970,12 +874,10 @@ The receptacle state must be disconnected.
 
 .sp
 .ne 2
-.mk
 .na
 \fBpoweroff\fR
 .ad
 .RS 12n
-.rt  
 Powers the system board off.
 .sp
 The receptacle state must be disconnected.
@@ -989,12 +891,10 @@ The receptacle state must be disconnected.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fBReceptacle \fIap_id\fR\fR
 .ad
 .RS 20n
-.rt  
 For the Sun Fire high-end systems such as the Sun Fire 15K , the receptacle
 attachment point \fBID\fR takes the form \fBSB\fIX\fR\fR or \fBIO\fIX\fR\fR,
 where \fIX\fR equals the slot number.
@@ -1006,12 +906,10 @@ physical labelling on the machine. See the platform specific information in the
 
 .sp
 .ne 2
-.mk
 .na
 \fBComponent \fIap_id\fR\fR
 .ad
 .RS 20n
-.rt  
 The component attachment point \fBID\fR takes the form \fIcomponent_typeX\fR,
 where \fIcomponent_type\fR equals one of the component types described in
 "Component Types" and \fIX\fR equals the component number. The component number
@@ -1132,7 +1030,7 @@ In the following example, the memory sizes are displayed in Kbytes.
 # \fBcfgadm -c unconfigure -y SB0::memory &\fR
 # \fBcfgadm -l -s noheadings,cols=info -o parsable SB0::memory SB1::memory\fR
 
-address=0x0 size=2097152 permanent=752592 target=SB1::memory 
+address=0x0 size=2097152 permanent=752592 target=SB1::memory
      deleted=1273680 remaining=823472
 address=0x1000000 size=2097152 source=SB0::memory
 .fi
@@ -1167,13 +1065,12 @@ See \fBattributes\fR(5) for a description of the following attribute:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-StabilitySee below.
+Stability	See below.
 .TE
 
 .sp
@@ -1299,12 +1196,10 @@ The \fB-t\fR and \fB-x\fR options behave differently on the Sun Fire high-end
 system platforms. The following list describes their behavior:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
 .RS 24n
-.rt  
 The system controller uses a CPU to test system boards by running \fBLPOST\fR,
 sequenced by the \fBhpost\fR command. To test I/O boards, the driver starts the
 testing in response to the \fB-t\fR option, and the test runs automatically
@@ -1317,12 +1212,10 @@ system boards (not MCPU boards) to test I/O boards.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fBassign | unassign\fR\fR
 .ad
 .RS 24n
-.rt  
 In the Sun Fire high-end system  administration model, the platform
 administrator controls the platform hardware through the use of an available
 component list for each domain. This information is maintained on the system
@@ -1341,34 +1234,28 @@ is not in the available component list for a domain.
 The following are the names and descriptions of the component types:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcpu\fR\fR
 .ad
 .RS 10n
-.rt  
 \fBCPU\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBio\fR\fR
 .ad
 .RS 10n
-.rt  
 \fBI/O\fR device
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmemory\fR\fR
 .ad
 .RS 10n
-.rt  
 Memory
 .RE
 
@@ -1406,34 +1293,28 @@ through \fBSB5\fR, and I/O boards can range from \fBIB6\fR through \fBIB9\fR.
 The following are the names and descriptions of the component types:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcpu\fR\fR
 .ad
 .RS 10n
-.rt  
 \fBCPU\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpci\fR\fR
 .ad
 .RS 10n
-.rt  
 \fBI/O\fR device
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmemory\fR\fR
 .ad
 .RS 10n
-.rt  
 Memory
 .RE
 
diff --git a/usr/src/man/man1m/cfgadm_scsi.1m b/usr/src/man/man1m/cfgadm_scsi.1m
index 68fff62aa4..d4781ea505 100644
--- a/usr/src/man/man1m/cfgadm_scsi.1m
+++ b/usr/src/man/man1m/cfgadm_scsi.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH cfgadm_scsi 1M "6 Jun 2006" "SunOS 5.11" "System Administration Commands"
+.TH CFGADM_SCSI 1M "Jun 6, 2006"
 .SH NAME
 cfgadm_scsi \- SCSI hardware specific commands for cfgadm
 .SH SYNOPSIS
@@ -123,56 +123,46 @@ points. The receptacle and occupant state for attachment points at the
 \fBSCSI\fR controller have the following meanings:
 .sp
 .ne 2
-.mk
 .na
 \fBempty\fR
 .ad
 .RS 16n
-.rt  
 not applicable
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBdisconnected\fR
 .ad
 .RS 16n
-.rt  
 bus quiesced (\fBI/O\fR activity on bus is suspended)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBconnected\fR
 .ad
 .RS 16n
-.rt  
 bus active
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBconfigured\fR
 .ad
 .RS 16n
-.rt  
 one or more devices on the bus is configured
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBunconfigured\fR
 .ad
 .RS 16n
-.rt  
 no device on the bus is configured
 .RE
 
@@ -181,56 +171,46 @@ no device on the bus is configured
 The corresponding states for individual \fBSCSI\fR devices are:
 .sp
 .ne 2
-.mk
 .na
 \fBempty\fR
 .ad
 .RS 16n
-.rt  
 not applicable
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBdisconnected\fR
 .ad
 .RS 16n
-.rt  
 bus to which the device is attached is quiesced
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBconnected\fR
 .ad
 .RS 16n
-.rt  
 bus to which device is attached is active
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBconfigured\fR
 .ad
 .RS 16n
-.rt  
 device is configured
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBunconfigured\fR
 .ad
 .RS 16n
-.rt  
 device is not configured
 .RE
 
@@ -243,12 +223,10 @@ state changes, (\fB-c\fR), invoking hardware specific functions (\fB-x\fR), and
 obtaining configuration administration help messages (\fB-h\fR).
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIfunction\fR\fR
 .ad
 .RS 24n
-.rt  
 The following generic commands are defined for the \fBSCSI \fRhardware specific
 library:
 .sp
@@ -256,23 +234,19 @@ For \fBSCSI\fR controller attachment points, the following configuration state
 change operations are supported:
 .sp
 .ne 2
-.mk
 .na
 \fBconnect\fR
 .ad
 .RS 15n
-.rt  
 Unquiesce the \fBSCSI\fR bus.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBdisconnect\fR
 .ad
 .RS 15n
-.rt  
 Quiesce the bus (suspend \fBI/O\fR activity on bus).
 .sp
 Incorrect use of this command can cause the system to hang. See \fBNOTES\fR.
@@ -280,46 +254,38 @@ Incorrect use of this command can cause the system to hang. See \fBNOTES\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBconfigure\fR
 .ad
 .RS 15n
-.rt  
 Configure new devices on \fBSCSI\fR bus.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBunconfigure\fR
 .ad
 .RS 15n
-.rt  
 Unconfigure all devices connected to bus.
 .RE
 
 The following generic commands are defined for \fBSCSI\fR devices:
 .sp
 .ne 2
-.mk
 .na
 \fBconfigure\fR
 .ad
 .RS 15n
-.rt  
 configure a specific device
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBunconfigure\fR
 .ad
 .RS 15n
-.rt  
 unconfigure a specific device
 .RE
 
@@ -327,12 +293,10 @@ unconfigure a specific device
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 24n
-.rt  
 When used with the \fBdisconnect\fR command, forces a quiesce of the \fBSCSI\fR
 bus, if supported by hardware.
 .sp
@@ -341,58 +305,48 @@ Incorrect use of this command can cause the system to hang. See \fBNOTES\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIap_id\fR\fR
 .ad
 .RS 24n
-.rt  
 SCSI specific help can be obtained by using the help option with any SCSI
 attachment point.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIhardware_option\fR\fR
 .ad
 .RS 24n
-.rt  
 No hardware specific options are currently defined.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIlisting_option\fR\fR
 .ad
 .RS 24n
-.rt  
 Attachment points of class \fBscsi\fR can be listed by using the \fBselect\fR
 sub-option. Refer to the \fBcfgadm\fR(1M) man page for additional information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fIap_id\fR\fR
 .ad
 .RS 24n
-.rt  
 No test commands are available at present.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fIhardware_function\fR\fR
 .ad
 .RS 24n
-.rt  
 Some of the following commands can only be used with SCSI controllers and some
 only with SCSI devices.
 .sp
@@ -403,7 +357,6 @@ for a \fBSCSI\fR device, for example: \fBc0::dsk/c0dt3d0\fR.
 The following hardware specific functions are defined:
 .sp
 .ne 2
-.mk
 .na
 \fBinsert_device \fIcontroller_ap_id\fR\fR
 .ad
@@ -416,7 +369,6 @@ This command is intended for interactive use only.
 
 .sp
 .ne 2
-.mk
 .na
 \fBremove_device \fIdevice_ap_id\fR\fR
 .ad
@@ -429,7 +381,6 @@ This command is intended for interactive use only.
 
 .sp
 .ne 2
-.mk
 .na
 \fBreplace_device \fIdevice_ap_id\fR\fR
 .ad
@@ -443,7 +394,6 @@ This command is intended for interactive use only.
 
 .sp
 .ne 2
-.mk
 .na
 \fBreset_device \fIdevice_ap_id\fR\fR
 .ad
@@ -454,7 +404,6 @@ Reset \fIdevice_ap_id\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBreset_bus \fIcontroller_ap_id\fR\fR
 .ad
@@ -466,7 +415,6 @@ bus.
 
 .sp
 .ne 2
-.mk
 .na
 \fBreset_all \fIcontroller_ap_id\fR\fR
 .ad
@@ -477,7 +425,6 @@ Reset bus \fIcontroller_ap_id\fR and all devices on the bus.
 
 .sp
 .ne 2
-.mk
 .na
 \fBlocator [=on|off] \fIdevice_ap_id\fR\fR
 .ad
@@ -490,7 +437,6 @@ locator is printed.
 
 .sp
 .ne 2
-.mk
 .na
 \fBled[=LED,mode=on|off|blink] \fIdevice_ap_id\fR\fR
 .ad
@@ -555,7 +501,7 @@ The system responds with the following:
 .nf
 Adding device to SCSI HBA: /devices/sbus@1f,0/SUNW,fas@e,8800000
 This operation will suspend activity on SCSI bus c0
-Continue (yes/no)? 
+Continue (yes/no)?
 .fi
 .in -2
 .sp
@@ -579,7 +525,7 @@ The system responds with the following:
 .sp
 .in +2
 .nf
-SCSI bus quiesced successfully. 
+SCSI bus quiesced successfully.
 It is now safe to proceed with hotplug operation.
 Enter y if operation is complete or n to abort (yes/no)?
 .fi
@@ -645,7 +591,7 @@ The system responds with the following:
 .sp
 .in +2
 .nf
-SCSI bus quiesced successfully. 
+SCSI bus quiesced successfully.
 It is now safe to proceed with hotplug operation.
 Enter y if operation is complete or n to abort (yes/no)?
 .fi
@@ -745,7 +691,6 @@ The system does not print anything in response.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/cfgadm/scsi.so.1\fR\fR
 .ad
@@ -756,7 +701,6 @@ hardware-specific library for generic \fBSCSI\fR hot-plugging
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/platform/SPARC-Enterprise/lib/cfgadm/scsi.so.1\fR\fR
 .ad
diff --git a/usr/src/man/man1m/cfgadm_sdcard.1m b/usr/src/man/man1m/cfgadm_sdcard.1m
index 6705f77a28..a4a84c89af 100644
--- a/usr/src/man/man1m/cfgadm_sdcard.1m
+++ b/usr/src/man/man1m/cfgadm_sdcard.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH cfgadm_sdcard 1M "28 Feb 2008" "SunOS 5.11" "System Administration Commands"
+.TH CFGADM_SDCARD 1M "Feb 28, 2008"
 .SH NAME
 cfgadm_sdcard \- SD/MMC hardware-specific commands for cfgadm
 .SH SYNOPSIS
@@ -112,7 +112,6 @@ The receptacle state for an attachment point at the  SD/MMC slot has the
 following  meanings:
 .sp
 .ne 2
-.mk
 .na
 \fBempty\fR
 .ad
@@ -124,7 +123,6 @@ this slot.
 
 .sp
 .ne 2
-.mk
 .na
 \fBdisconnected\fR
 .ad
@@ -136,7 +134,6 @@ no communication with the device was established,  or the slot has failed.
 
 .sp
 .ne 2
-.mk
 .na
 \fBconnected\fR
 .ad
@@ -152,7 +149,6 @@ The occupant (device inserted in the SD/MMC slot) state has the following
 meanings:
 .sp
 .ne 2
-.mk
 .na
 \fBconfigured\fR
 .ad
@@ -164,7 +160,6 @@ system.
 
 .sp
 .ne 2
-.mk
 .na
 \fBunconfigured\fR
 .ad
@@ -180,7 +175,6 @@ yet configured.                      To configure, run  the command \fBcfgadm
 The attachment point (SD/MMC slot) condition has the following meanings:
 .sp
 .ne 2
-.mk
 .na
 \fBok\fR
 .ad
@@ -191,7 +185,6 @@ The SD/MMC slot is powered-on, enabled and  ready for use.
 
 .sp
 .ne 2
-.mk
 .na
 \fBfailed\fR
 .ad
@@ -204,7 +197,6 @@ due to the device inserted in the slot.
 
 .sp
 .ne 2
-.mk
 .na
 \fBunknown\fR
 .ad
@@ -226,7 +218,6 @@ configuration administration help messages (\fB-h\fR).
 change operations are supported:
 .sp
 .ne 2
-.mk
 .na
 \fBconnect\fR
 .ad
@@ -238,7 +229,6 @@ attached device. This operation implies powering-on the slot if necessary.
 
 .sp
 .ne 2
-.mk
 .na
 \fBdisconnect\fR
 .ad
@@ -255,7 +245,6 @@ The following state change operations are supported for an SD/MMC card inserted
 in to the SD/MMC slot:
 .sp
 .ne 2
-.mk
 .na
 \fBconfigure\fR
 .ad
@@ -267,7 +256,6 @@ configured.  This command  also  implies connect operation, if necessary.
 
 .sp
 .ne 2
-.mk
 .na
 \fBunconfigure\fR
 .ad
@@ -365,7 +353,7 @@ unconfiguring a disk:
 .nf
        # cfgadm -c unconfigure sdcard1/5::dsk/c01t35d0
 
- 
+
 .fi
 .in -2
 
@@ -386,7 +374,6 @@ The system responds with the following:
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB/usr/lib/cfgadm/sdcard.so.1\fR
 .ad
diff --git a/usr/src/man/man1m/cfgadm_sysctrl.1m b/usr/src/man/man1m/cfgadm_sysctrl.1m
index 594682f171..d3376f1139 100644
--- a/usr/src/man/man1m/cfgadm_sysctrl.1m
+++ b/usr/src/man/man1m/cfgadm_sysctrl.1m
@@ -3,19 +3,19 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH cfgadm_sysctrl 1M "10 Mar 1999" "SunOS 5.11" "System Administration Commands"
+.TH CFGADM_SYSCTRL 1M "Mar 10, 1999"
 .SH NAME
 cfgadm_sysctrl \- EXX00 system board administration
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/cfgadm\fR \fB-c\fR \fIfunction\fR [\fB-f\fR] 
+\fB/usr/sbin/cfgadm\fR \fB-c\fR \fIfunction\fR [\fB-f\fR]
      [\fB-o\fR disable-at-boot | enable-at-boot] [\fB-n\fR | \fB-y\fR] sysctrl0:slot# ...
 .fi
 
 .LP
 .nf
-\fB/usr/sbin/cfgadm\fR \fB-x\fR quiesce-test sysctrl0:slot# 
+\fB/usr/sbin/cfgadm\fR \fB-x\fR quiesce-test sysctrl0:slot#
 .fi
 
 .LP
@@ -77,7 +77,6 @@ Refer to \fBcfgadm\fR(1M) for a more complete description options.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIfunction\fR\fR
 .ad
@@ -87,12 +86,10 @@ Perform the state change function. Specify \fIfunction\fR as \fBconnect\fR,
 \fBdisconnect\fR, \fBconfigure\fR or \fBunconfigure\fR.
 .sp
 .ne 2
-.mk
 .na
 \fBconfigure\fR
 .ad
 .RS 15n
-.rt  
 Change the occupant state to \fBconfigure\fR.
 .sp
 If the receptacle state is \fBdisconnect\fRed, the \fBconfigure\fR function
@@ -110,12 +107,10 @@ memory banks.
 
 .sp
 .ne 2
-.mk
 .na
 \fBconnect\fR
 .ad
 .RS 15n
-.rt  
 Change the receptacle state to \fBconnect\fRed.
 .sp
 Changing the receptacle state requires that the system bus be frozen while the
@@ -136,12 +131,10 @@ force flag, \fB-f\fR, or the enable at boot flag, \fB-o\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fBdisconnect\fR
 .ad
 .RS 15n
-.rt  
  Change the receptacle state to \fBdisconnect\fRed.
 .sp
 If the occupant state is \fBconfigure\fR, the \fBdisconnect\fR function first
@@ -152,12 +145,10 @@ powered-off ready for removal.
 
 .sp
 .ne 2
-.mk
 .na
 \fBunconfigure\fR
 .ad
 .RS 15n
-.rt  
 Change the occupant state to \fBunconfigure\fRed.
 .sp
 Devices on the board are made invisible to Solaris during this process. The
@@ -176,7 +167,6 @@ and\fBp_online\fR(2) for more information on off-lining \fBCPU\fRs.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -189,7 +179,6 @@ Enterprise 6x00/5x00/4x00/3x00 Systems\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
@@ -213,7 +202,6 @@ following additional information appears first: \fB{target: # | no disk}
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR disable-at-boot | enable-at-boot\fR
 .ad
@@ -229,7 +217,6 @@ block on connecting a \fBdisabled-at-boot\fR board.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR insert-test | remove-test\fR
 .ad
@@ -248,7 +235,6 @@ it had been inserted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR quiesce-test sysctrl0:slot1\fR
 .ad
@@ -266,7 +252,6 @@ systems have a slot1 the given form is recommended.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR set-condition-test=# \fR
 .ad
@@ -281,7 +266,7 @@ number indicating one of the following condition values:
 .in +2
 .nf
 0      unknown
-1      ok 
+1      ok
 2      failing
 3      failed
 4      unusable
@@ -297,12 +282,10 @@ number indicating one of the following condition values:
 The following operand is supported:
 .sp
 .ne 2
-.mk
 .na
 \fBsysctrl0:slot\fI#\fR\fR
 .ad
 .RS 28n
-.rt  
 The attachment points for boards on \fBEXX00\fR systems are published by
 instance \fB0\fR of the \fBsysctrl\fR driver (\fBsysctrl0\fR). The names of the
 attachment points are numbered from \fBslot0\fR through \fBslot15\fR. Specify
@@ -315,7 +298,6 @@ This form conforms to the logical \fBap_id\fR specification given in
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB/usr/platform/sun4u/lib/cfgadm/sysctrl.so.1\fR
 .ad
@@ -326,7 +308,6 @@ Hardware specific library
 
 .sp
 .ne 2
-.mk
 .na
 \fB/devices/central@1f,0/fhc@0,f8800000/clock-board@0,900000:slot*\fR
 .ad
diff --git a/usr/src/man/man1m/cfgadm_usb.1m b/usr/src/man/man1m/cfgadm_usb.1m
index e27a0fd45f..23a565cd75 100644
--- a/usr/src/man/man1m/cfgadm_usb.1m
+++ b/usr/src/man/man1m/cfgadm_usb.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH cfgadm_usb 1M "1 Mar 2007" "SunOS 5.11" "System Administration Commands"
+.TH CFGADM_USB 1M "Mar 1, 2007"
 .SH NAME
 cfgadm_usb \- USB hardware-specific commands for cfgadm
 .SH SYNOPSIS
@@ -20,7 +20,7 @@ cfgadm_usb \- USB hardware-specific commands for cfgadm
 
 .LP
 .nf
-\fB/usr/sbin/cfgadm\fR \fB-v\fR [\fB-a\fR] [\fB-s\fR \fIlisting_option\fR] 
+\fB/usr/sbin/cfgadm\fR \fB-v\fR [\fB-a\fR] [\fB-s\fR \fIlisting_option\fR]
      [\fB-l\fR [\fIap_id\fR | \fIap_type\fR...]]
 .fi
 
@@ -206,7 +206,6 @@ The receptacle states for attachment points at the \fBUSB\fR port have the
 following meanings:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconnected\fR\fR
 .ad
@@ -218,7 +217,6 @@ port. The device is logically connected to the USB bus.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisconnected\fR\fR
 .ad
@@ -231,7 +229,6 @@ the port. The device has been logically disconnected from the \fBUSB\fR bus
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBempty\fR\fR
 .ad
@@ -246,7 +243,6 @@ The occupant states for devices at \fBUSB\fR port attachment points at the
 \fBUSB\fR port have the following meanings:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconfigured\fR\fR
 .ad
@@ -257,7 +253,6 @@ The \fBUSB\fR device at the \fBUSB\fR port is configured and usable by Solaris.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunconfigured\fR\fR
 .ad
@@ -273,7 +268,6 @@ use with Solaris, for example, having no driver or a device problem.
 The attachment point conditions are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBok\fR\fB\fR\fR
 .ad
@@ -284,7 +278,6 @@ Normal state - ready for use.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfailing\fR\fR
 .ad
@@ -295,7 +288,6 @@ Not used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfailed\fR\fR
 .ad
@@ -306,7 +298,6 @@ Not used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunusable\fR\fR
 .ad
@@ -323,7 +314,6 @@ instructions for clearing this attachment point condition.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunknown\fR\fR
 .ad
@@ -362,7 +352,6 @@ All other options have the same meaning as defined in \fBcfgadm\fR(1M).
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIfunction\fR\fR
 .ad
@@ -372,7 +361,6 @@ The following generic commands are defined for the \fBUSB\fR hardware specific
 library. The following configuration state change operations are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconfigure\fR\fR
 .ad
@@ -388,7 +376,6 @@ this command, the device is ready for use under Solaris.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisconnect\fR\fR
 .ad
@@ -405,7 +392,6 @@ can be found and there are no problems enumerating and configuring the device.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunconfigure\fR\fR
 .ad
@@ -422,7 +408,6 @@ condition, as it physically hotplugging the device on the port.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -433,7 +418,6 @@ Not supported.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIap_id\fR\fR
 .ad
@@ -445,7 +429,6 @@ Not supported.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR[\fBv\fR]\fR
 .ad
@@ -492,7 +475,6 @@ See the Universal Serial Bus specification for a description of these fields.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIhardware_options\fR\fR
 .ad
@@ -505,7 +487,6 @@ of the options available.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIlisting_options\fR\fR
 .ad
@@ -517,7 +498,6 @@ sub-option. See \fBcfgadm\fR(1M).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fIhardware_function\fR\fR
 .ad
@@ -526,7 +506,6 @@ sub-option. See \fBcfgadm\fR(1M).
 The following hardware-specific functions are defined:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBusb_config\fR \fB-o\fR \fBconfig=\fR\fIn\fR\fR
 .ad
@@ -551,7 +530,6 @@ to their previous state and an error message is issued.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBusb_reset\fR\fR
 .ad
@@ -685,7 +663,7 @@ The following command lists the status of a port with no device plugged in:
 .nf
 example# \fBcfgadm -l usb0/1.3\fR
 Ap_Id           Type         Receptacle   Occupant     Condition
-usb0/1.3        unknown      empty        unconfigured ok       
+usb0/1.3        unknown      empty        unconfigured ok
 .fi
 .in -2
 .sp
@@ -746,7 +724,7 @@ attached to \fBusb0/1.3\fR:
 .nf
 example# \fBcfgadm -c disconnect usb0/1.3\fR
 Disconnect the device: /devices/pci@0,0/pci8086,7112@7,2/hub@2:2.3
-This operation suspends activity on the USB device 
+This operation suspends activity on the USB device
 Continue (yes/no)?
 
 Enter:
@@ -755,7 +733,7 @@ Enter:
 
 example# \fBcfgadm -l usb0/1.3\fR
 Ap_Id         Type         Receptacle     Occupant        Condition
-usb0/1.3      unknown      disconnected   unconfigured    ok    
+usb0/1.3      unknown      disconnected   unconfigured    ok
 .fi
 .in -2
 .sp
@@ -797,7 +775,7 @@ The following command resets a \fBUSB\fR device:
 .nf
 example# \fBcfgadm -x usb_reset usb0/1.3\fR
 Reset the device: /devices/pci@0,0/pci8086,7112@7,2/hub@2:2.3
-This operation suspends activity on the USB device 
+This operation suspends activity on the USB device
 Continue (yes/no)?
 
 Enter:
@@ -862,7 +840,7 @@ mega"  Product:"USB Zip 250"  NConfigs:1  Config:0 : Default
 .nf
 example# \fBcfgadm -l -s "cols=ap_id:info" usb0/1.5\fR
 Ap_Id                         Information
-usb0/1.5                      Mfg:"Iomega"  Product:"USB Zip 250"  
+usb0/1.5                      Mfg:"Iomega"  Product:"USB Zip 250"
 NConfigs:1  Config:0 : Default
 .fi
 .in -2
@@ -879,19 +857,19 @@ on the system:
 .in +2
 .nf
 example# \fBcfgadm -l -s "select=class(usb),cols=ap_id:info"\fR
-Ap_Id                         Information 
-usb0/1                        Mfg:<undefined>  Product:<undefined>  
+Ap_Id                         Information
+usb0/1                        Mfg:<undefined>  Product:<undefined>
 NConfigs:1  Config:0 <no cfg str descr>
-usb0/2             
-usb0/1.1                      Mfg:<undefined>  Product:<undefined>  
+usb0/2
+usb0/1.1                      Mfg:<undefined>  Product:<undefined>
 NConfigs:1  Config:0 <no cfg str descr>
-usb0/1.2         
-usb0/1.3         
-usb0/1.4                      Mfg:"Wizard"  Product:"Modem/ISDN"  
+usb0/1.2
+usb0/1.3
+usb0/1.4                      Mfg:"Wizard"  Product:"Modem/ISDN"
 NConfigs:3  Config:1 : V.90 Analog Modem
-usb0/1.5                      Mfg:"Iomega"  Product:"USB Zip 250"  
+usb0/1.5                      Mfg:"Iomega"  Product:"USB Zip 250"
 NConfigs:1  Config:0 : Default
-usb0/1.6                      Mfg:"SOLID YEAR"  Product:"SOLID YEAR 
+usb0/1.6                      Mfg:"SOLID YEAR"  Product:"SOLID YEAR
 USB"NConfigs:1  Config:0 <no cfg str descr>
 usb0/1.7
 .fi
@@ -908,15 +886,15 @@ information about those devices.
 .in +2
 .nf
 example# \fBcfgadm -l -s "select=class(usb),cols=ap_id:info" | grep Mfg\fR
-usb0/1                        Mfg:<undefined>  Product:<undefined>  
+usb0/1                        Mfg:<undefined>  Product:<undefined>
 NConfigs:1  Config:0 <no cfg str descr>
-usb0/1.1                      Mfg:<undefined>  Product:<undefined>  
+usb0/1.1                      Mfg:<undefined>  Product:<undefined>
 NConfigs:1  Config:0 <no cfg str descr>
-usb0/1.4                      Mfg:"Wizard"  Product:"Modem/ISDN"  
+usb0/1.4                      Mfg:"Wizard"  Product:"Modem/ISDN"
 NConfigs:3  Config:1 : V.90 Analog Modem
-usb0/1.5                      Mfg:"Iomega"  Product:"USB Zip 250"  
+usb0/1.5                      Mfg:"Iomega"  Product:"USB Zip 250"
 NConfigs:1  Config:0 : Default
-usb0/1.6                      Mfg:"SOLID YEAR"  Product:"SOLID YEAR USB" 
+usb0/1.6                      Mfg:"SOLID YEAR"  Product:"SOLID YEAR USB"
 Config:0 <no cfg str descr>
 .fi
 .in -2
@@ -939,7 +917,7 @@ are \fB0\fR, \fB1\fR, and \fB2\fR (\fB0\fR to (\fIN\fR\fBConfigs-1\fR)).
 .nf
 example# \fBcfgadm -l -s "cols=ap_id:info" usb0/1.4\fR
 Ap_Id                         Information
-usb0/1.4                      Mfg:"Wizard"  Product:"Modem/ISDN"  
+usb0/1.4                      Mfg:"Wizard"  Product:"Modem/ISDN"
 NConfigs:3  Config:1 V.90 Analog Modem"
 .fi
 .in -2
@@ -960,7 +938,7 @@ example# \fBcfgadm -o config=2 -x usb_config usb0/1.4\fR
 Setting the device: /devices/pci@1f,2000/usb@1/device@3
 to USB configuration 2
 This operation suspends activity on the USB device
-Continue (yes/no)? 
+Continue (yes/no)?
 
 Enter:
 
@@ -981,7 +959,6 @@ field.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/cfgadm/usb.so.1\fR\fR
 .ad
diff --git a/usr/src/man/man1m/cfsadmin.1m b/usr/src/man/man1m/cfsadmin.1m
index c1d0ab7fda..942ee1c067 100644
--- a/usr/src/man/man1m/cfsadmin.1m
+++ b/usr/src/man/man1m/cfsadmin.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH cfsadmin 1M "21 Feb 2004" "SunOS 5.11" "System Administration Commands"
+.TH CFSADMIN 1M "Feb 21, 2004"
 .SH NAME
 cfsadmin \- administer disk space used for caching file systems with the Cache
 File-System (CacheFS)
@@ -80,7 +80,6 @@ file system.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR [ \fB-o\fR \fIcacheFS-parameters\fR ] \fIcache_directory\fR\fR
 .ad
@@ -92,7 +91,6 @@ directory must not exist prior to cache creation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR { \fIcache_ID\fR | all } \fIcache_directory\fR\fR
 .ad
@@ -109,7 +107,6 @@ As indicated by the syntax above, you must supply either a \fIcache_ID\fR or
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIcache_directory\fR\fR
 .ad
@@ -122,7 +119,6 @@ resource utilization and cache resource parameters.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR { \fImntpt1\fR ... } | all\fR
 .ad
@@ -143,7 +139,6 @@ As indicated by the syntax above, you must supply one or more mount points, or
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR [ \fB-o\fR \fIcacheFS-parameters\fR ] \fIcache_directory\fR\fR
 .ad
@@ -164,12 +159,10 @@ You can specify the following CacheFS resource parameters as arguments to the
 \fB-o\fR option. Separate multiple parameters with commas.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmaxblocks=\fR\fIn\fR\fR
 .ad
 .RS 18n
-.rt  
 Maximum amount of storage space that CacheFS can use, expressed as a percentage
 of the total number of blocks in the front file system. If CacheFS does not
 have exclusive use of the front file system, there is no guarantee that all the
@@ -179,12 +172,10 @@ space the \fBmaxblocks\fR parameter allows is available. The default is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBminblocks=\fR\fIn\fR\fR
 .ad
 .RS 18n
-.rt  
 Minimum amount of storage space, expressed as a percentage of the total number
 of blocks in the front file system, that CacheFS is always allowed to use
 without limitation by its internal control mechanisms. If CacheFS does not have
@@ -195,12 +186,10 @@ default is \fB0\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBthreshblocks=\fR\fIn\fR\fR
 .ad
 .RS 18n
-.rt  
 A percentage of the total blocks in the front file system beyond which CacheFS
 cannot claim resources once its block usage has reached the level specified by
 \fBminblocks\fR. The default is \fB85\fR.
@@ -208,12 +197,10 @@ cannot claim resources once its block usage has reached the level specified by
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmaxfiles=\fR\fIn\fR\fR
 .ad
 .RS 18n
-.rt  
 Maximum number of files that CacheFS can use, expressed as a percentage of the
 total number of inodes in the front file system. If CacheFS does not have
 exclusive use of the front file system, there is no guarantee that all the
@@ -223,12 +210,10 @@ inodes the \fBmaxfiles\fR parameter allows is available. The default is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBminfiles=\fR\fIn\fR\fR
 .ad
 .RS 18n
-.rt  
 Minimum number of files, expressed as a percentage of the total number of
 inodes in the front file system, that CacheFS is always allowed to use without
 limitation by its internal control mechanisms. If CacheFS does not have
@@ -239,12 +224,10 @@ default is \fB0\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBthreshfiles=\fR\fIn\fR\fR
 .ad
 .RS 18n
-.rt  
 A percentage of the total inodes in the front file system beyond which CacheFS
 cannot claim inodes once its usage has reached the level specified by
 \fBminfiles\fR. The default is \fB85\fR.
@@ -252,12 +235,10 @@ cannot claim inodes once its usage has reached the level specified by
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmaxfilesize=\fR\fIn\fR\fR
 .ad
 .RS 18n
-.rt  
 Largest file size, expressed in megabytes, that CacheFS is allowed to cache.
 The default is \fB3\fR. You cannot decrease the block or inode allotment for a
 cache. To decrease the size of a cache, you must remove it and create it again
@@ -270,23 +251,19 @@ has no effect.
 .SH OPERANDS
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcache_directory\fR\fR
 .ad
 .RS 19n
-.rt  
 The directory under which the cache is actually stored.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fImntpt1\fR\fR
 .ad
 .RS 19n
-.rt  
 The directory where the CacheFS is mounted.
 .RE
 
@@ -413,23 +390,19 @@ example# \fBcfsadmin\fR \fB-s\fR \fBall\fR
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 An error occurred.
 .RE
 
diff --git a/usr/src/man/man1m/chat.1m b/usr/src/man/man1m/chat.1m
index d6d72616c6..0f3b594215 100644
--- a/usr/src/man/man1m/chat.1m
+++ b/usr/src/man/man1m/chat.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH chat 1M "4 May 2001" "SunOS 5.11" "System Administration Commands"
+.TH CHAT 1M "May 4, 2001"
 .SH NAME
 chat \- automated conversational exchange tool
 .SH SYNOPSIS
@@ -26,12 +26,10 @@ Point-To-Point Protocol daemon (\fBpppd\fR) and the remote \fBpppd\fR process.
 The  \fBchat\fR command supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fI<chat file>\fR\fR
 .ad
 .RS 23n
-.rt  
 Read the \fBchat\fR script from the  \fBchat\fR file. This option is mutually
 exclusive with the  \fBchat\fR script parameters. You must have \fBread\fR
 access to use the file. Multiple lines are permitted in the file. Use the space
@@ -40,12 +38,10 @@ or horizontal tab characters to separate the strings.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fB\fI<timeout>\fR\fR \fR
 .ad
 .RS 23n
-.rt  
 Set the timeout for the expected string to be received. If the string is not
 received within the time limit, the reply string is not sent. If specified,
 a 'subexpect' (alternate reply) string can be sent. Otherwise, if no alternate
@@ -55,12 +51,10 @@ the  \fBchat\fR program to terminate with a non-zero error code.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fB\fI<report file> \fR\fR \fR
 .ad
 .RS 23n
-.rt  
 Set the file for output of the report strings. If you use the keyword
 \fBREPORT\fR, the resulting strings are written to this file. If  the \fB-r\fR
 option is not used and you use the \fBREPORT\fR keyword, the  \fBstderr\fR file
@@ -69,12 +63,10 @@ is used for the report strings.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fR
 .ad
 .RS 23n
-.rt  
 Start with the echo option turned on. You turn echo on or off at specific
 points in the \fBchat\fR script using the \fBECHO\fR keyword. When echoing is
 enabled, all output from the modem is echoed to \fBstderr\fR.
@@ -82,24 +74,20 @@ enabled, all output from the modem is echoed to \fBstderr\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-E\fR \fR
 .ad
 .RS 23n
-.rt  
 Enables environment variable substitution within \fBchat\fR scripts using the
 standard \fI$xxx\fR syntax.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR \fR
 .ad
 .RS 23n
-.rt  
 Request that the \fBchat\fR script execute in a verbose mode. The  \fBchat\fR
 program logs the execution state of the \fBchat\fR script as well as all text
 received from the modem and output strings sent to the modem. The default is to
@@ -109,12 +97,10 @@ alterable using the \fB-S\fR and \fB-s\fR options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR \fR
 .ad
 .RS 23n
-.rt  
 Request that the  \fBchat\fR script be executed in a \fBstderr\fR verbose mode.
 The \fBchat\fR program logs all text received from the modem and output strings
 sent to the modem to \fBstderr\fR. \fBstderr\fR is usually the local console at
@@ -123,24 +109,20 @@ the station running the  \fBchat\fR or \fBpppd\fR program.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 23n
-.rt  
 Use \fBstderr\fR.  Log messages from \fB-v\fR and error messages are sent to
 \fBstderr\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR\fR
 .ad
 .RS 23n
-.rt  
 Do not use syslog.  By default, error messages are set to syslog. This option
 prevents log messages from \fB-v\fR and error messages from being sent to
 syslog.
@@ -148,24 +130,20 @@ syslog.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fB\fI<phone number>\fR\fR\fR
 .ad
 .RS 23n
-.rt  
 Pass in an arbitrary string (usually a telephone number) that will be
 substituted for the \fB\eT\fR substitution metacharacter in a send string.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-U\fR \fB\fI<phone number 2>\fR\fR\fR
 .ad
 .RS 23n
-.rt  
 Pass in a second string (usually a telephone number) that will be substituted
 for the \fB\eU\fR substitution metacharacter in a send string. This is useful
 when dialing an ISDN terminal adapter that requires two numbers.
@@ -173,12 +151,10 @@ when dialing an ISDN terminal adapter that requires two numbers.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBscript\fR \fR
 .ad
 .RS 23n
-.rt  
 If the script is not specified in a file with the \fB-f\fR option, the script
 is included as parameters to the \fBchat\fR program.
 .RE
@@ -267,7 +243,7 @@ with a \fB#\fR character, write something like this:
 .sp
 .in +2
 .nf
-# Now wait for the prompt and send logout string 
+# Now wait for the prompt and send logout string
 \&'# ' logout
 .fi
 .in -2
@@ -329,16 +305,16 @@ example, add a line similar to the following to the script:
 .sp
 .in +2
 .nf
-ABORT BUSY  
-ECHO OFF  
-SAY "Dialing your ISP...\en"  
-\&'' ATDT5551212  
-TIMEOUT 120 
-SAY "Waiting up to 2 minutes for connection ..." 
-CONNECT ''  
-SAY "Connected, now logging in ...\en" 
-ogin: account 
-ssword: pass 
+ABORT BUSY
+ECHO OFF
+SAY "Dialing your ISP...\en"
+\&'' ATDT5551212
+TIMEOUT 120
+SAY "Waiting up to 2 minutes for connection ..."
+CONNECT ''
+SAY "Connected, now logging in ...\en"
+ogin: account
+ssword: pass
 $ \ec
 SAY "Logged in OK ... \en"
 .fi
@@ -351,7 +327,7 @@ In this case, you will see:
 .sp
 .in +2
 .nf
-Dialing your ISP... 
+Dialing your ISP...
 Waiting up to 2 minutes for connection...Connected, now logging in...
 Logged in OK ...
 .fi
@@ -408,7 +384,7 @@ following script:
 .sp
 .in +2
 .nf
-ABORT   'BUSY' 
+ABORT   'BUSY'
 ABORT   'NO CARRIER'
 ""    AT&F
 OK\er\en  ATD1234567
@@ -498,7 +474,7 @@ send string using the sequence ^D.
 The BREAK special reply string sends a break condition. The break is a special
 transmitter signal. Many UNIX systems handle break by cycling through available
 bit rates, and sending break is often needed when the remote system does not
-support autobaud.  BREAK is equivalent to 	using \eK\ec as the reply string.
+support autobaud. BREAK is equivalent to using \eK\ec as the reply string.
 You embed the break sequence into the send string using the \eK sequence.
 .SS "Escape Sequences"
 .sp
@@ -509,13 +485,11 @@ sequences is presented below. Sequences that are not accepted by expect strings
 are indicated.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\&''\fR \fR
 .ad
 .RS 10n
-.rt  
-Expects or sends a null string. If you send a null string, \fBchat\fR 	sends
+Expects or sends a null string. If you send a null string, \fBchat\fR sends
 the return character.  If you expect a null string, \fBchat\fR proceeds to the
 reply string without waiting.  This sequence can be a pair of apostrophes or
 quote mark characters.
@@ -523,23 +497,19 @@ quote mark characters.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\eb\fR \fR
 .ad
 .RS 10n
-.rt  
 Represents a backspace character.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\ec\fR \fR
 .ad
 .RS 10n
-.rt  
 Suppresses the newline at the end of the reply string. This is the only method
 to send a string without a trailing return character. This sequence must be at
 the end of the send string. For example, the sequence hello\ec will simply send
@@ -548,92 +518,76 @@ the characters h, e, l, l, o. (Not valid  in expect.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\ed\fR \fR
 .ad
 .RS 10n
-.rt  
 Delay for one second. The program uses \fBsleep\fR(1) which delays to a maximum
 of one second.  (Not valid  in expect.)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\eK\fR \fR
 .ad
 .RS 10n
-.rt  
 Insert a BREAK.  (Not valid  in expect.)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\en\fR \fR
 .ad
 .RS 10n
-.rt  
 Send a newline or linefeed character.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\eN\fR \fR
 .ad
 .RS 10n
-.rt  
 Send a null character. The same sequence may be represented by \e0.  (Not valid
 in expect.)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\ep\fR \fR
 .ad
 .RS 10n
-.rt  
 Pause for 1/10th of a second.  (Not valid  in expect.)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\eq\fR \fR
 .ad
 .RS 10n
-.rt  
 Suppress writing the string to syslog.  The string ?????? is written to the log
 in its place. (Not valid  in expect.)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\er\fR \fR
 .ad
 .RS 10n
-.rt  
 Send or expect a carriage return.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\es\fR \fR
 .ad
 .RS 10n
-.rt  
 Represents a space character in the string. Can be used when it is not
 desirable to quote the strings which contains spaces. The sequence 'HI\ TIM'
 and HI\esTIM are the same.
@@ -641,70 +595,58 @@ and HI\esTIM are the same.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\et\fR \fR
 .ad
 .RS 10n
-.rt  
 Send or expect a tab character.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\eT\fR \fR
 .ad
 .RS 10n
-.rt  
 Send the phone number string as specified with the \fB-T\fR option.  (Not valid
 in expect.)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\eU\fR \fR
 .ad
 .RS 10n
-.rt  
 Send the phone number 2 string as specified with the \fB-U\fR option. (Not
 valid  in expect.)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\e\e\fR \fR
 .ad
 .RS 10n
-.rt  
 Send or expect a backslash character.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\eddd\fR \fR
 .ad
 .RS 10n
-.rt  
 Collapse the octal digits (ddd) into a single ASCII character and send that
 character. (\e000 is not valid in an expect string.)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB^C\fR \fR
 .ad
 .RS 10n
-.rt  
 Substitute the sequence with the control character represented by C. For
 example, the character DC1 (17) is shown as ^Q. (Some characters are not valid
 in expect.)
@@ -724,36 +666,30 @@ the variable.
 The \fBchat\fR program terminates with the following completion codes:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR \fR
 .ad
 .RS 10n
-.rt  
 Normal program termination. Indicates that the script was executed without
 error to normal conclusion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR \fR
 .ad
 .RS 10n
-.rt  
 One or more of the parameters are invalid or an expect string was too large for
 the internal buffers. Indicates that the program was not properly executed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR \fR
 .ad
 .RS 10n
-.rt  
 An error occurred during the execution of the program. This may be due to a
 read or write operation failing or \fBchat\fR receiving a signal such as
 SIGINT.
@@ -761,12 +697,10 @@ SIGINT.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR \fR
 .ad
 .RS 10n
-.rt  
 A timeout event occurred when there was an expect string without having a
 "-subsend" string. This indicates that you may not have programmed the script
 correctly for the condition or that an unexpected event occurred and the
@@ -775,56 +709,46 @@ expected string could not be found.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR \fR
 .ad
 .RS 10n
-.rt  
 The first string marked as an ABORT condition occurred.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB5\fR \fR
 .ad
 .RS 10n
-.rt  
 The second string marked as an ABORT condition occurred.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB6\fR \fR
 .ad
 .RS 10n
-.rt  
 The third string marked as an ABORT  condition occurred.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB7\fR \fR
 .ad
 .RS 10n
-.rt  
 The fourth string marked as an ABORT condition occurred.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\&...\fR \fR
 .ad
 .RS 10n
-.rt  
 The other termination codes are also strings marked as an ABORT condition.
 .RE
 
@@ -842,13 +766,12 @@ See \fBattributes\fR(5)  for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/check-hostname.1m b/usr/src/man/man1m/check-hostname.1m
index ffff2c0ae3..a69698b84c 100644
--- a/usr/src/man/man1m/check-hostname.1m
+++ b/usr/src/man/man1m/check-hostname.1m
@@ -3,14 +3,14 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH check-hostname 1M "8 Mar 2006" "SunOS 5.11" "System Administration Commands"
+.TH CHECK-HOSTNAME 1M "Mar 8, 2006"
 .SH NAME
 check-hostname \- check if sendmail can determine the system's fully-qualified
 host name
 .SH SYNOPSIS
 .LP
 .nf
-\fB /usr/sbin/check-hostname\fR 
+\fB /usr/sbin/check-hostname\fR
 .fi
 
 .SH DESCRIPTION
@@ -25,34 +25,28 @@ determine the \fBFQHN\fR of the local host, it reports success. Otherwise,
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/hosts\fR\fR
 .ad
 .RS 22n
-.rt  
 Host name database
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/nsswitch.conf\fR\fR
 .ad
 .RS 22n
-.rt  
 Name service switch configuration file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/resolv.conf\fR\fR
 .ad
 .RS 22n
-.rt  
 Configuration file for name server routines
 .RE
 
@@ -64,13 +58,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/check-permissions.1m b/usr/src/man/man1m/check-permissions.1m
index 7f828c119e..d5c86ff0bf 100644
--- a/usr/src/man/man1m/check-permissions.1m
+++ b/usr/src/man/man1m/check-permissions.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH check-permissions 1M "10 Nov 2003" "SunOS 5.11" "System Administration Commands"
+.TH CHECK-PERMISSIONS 1M "Nov 10, 2003"
 .SH NAME
 check-permissions \- check permissions on mail rerouting files
 .SH SYNOPSIS
@@ -41,47 +41,39 @@ time-consuming.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIlogin\fR\fR
 .ad
 .RS 9n
-.rt  
 Where \fIlogin\fR is a valid user name, checks the home directory for
 \fIlogin\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBALL\fR\fR
 .ad
 .RS 9n
-.rt  
 Checks the home directory of  \fBall\fR users.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mail/sendmail.cf\fR\fR
 .ad
 .RS 25n
-.rt  
 Defines environment for  \fBsendmail\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mail/aliases\fR\fR
 .ad
 .RS 25n
-.rt  
 Ascii mail aliases file
 .RE
 
@@ -93,13 +85,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/chroot.1m b/usr/src/man/man1m/chroot.1m
index c15abcfa47..85f46d15a7 100644
--- a/usr/src/man/man1m/chroot.1m
+++ b/usr/src/man/man1m/chroot.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH chroot 1M "15 Dec 2003" "SunOS 5.11" "System Administration Commands"
+.TH CHROOT 1M "Dec 15, 2003"
 .SH NAME
 chroot \- change root directory for a command
 .SH SYNOPSIS
diff --git a/usr/src/man/man1m/clear_locks.1m b/usr/src/man/man1m/clear_locks.1m
index 4d92dc092b..3cf88bc6d7 100644
--- a/usr/src/man/man1m/clear_locks.1m
+++ b/usr/src/man/man1m/clear_locks.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH clear_locks 1M "6 Oct 2004" "SunOS 5.11" "System Administration Commands"
+.TH CLEAR_LOCKS 1M "Oct 6, 2004"
 .SH NAME
 clear_locks \- clear locks held on behalf of an NFS client
 .SH SYNOPSIS
@@ -30,12 +30,10 @@ cause applications to fail in an unexpected manner.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 6n
-.rt  
 Remove all locks created by the current machine and held by the server
 \fIhostname\fR.
 .RE
@@ -46,57 +44,47 @@ Remove all locks created by the current machine and held by the server
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIhostname\fR\fR
 .ad
 .RS 12n
-.rt  
 name of host server
 .RE
 
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful operation.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 If not root.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Usage error.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 5n
-.rt  
 If unable to contact server (\fBRPC\fR).
 .RE
 
diff --git a/usr/src/man/man1m/clinfo.1m b/usr/src/man/man1m/clinfo.1m
index 8f257a2eb9..4eb59dfa9c 100644
--- a/usr/src/man/man1m/clinfo.1m
+++ b/usr/src/man/man1m/clinfo.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH clinfo 1M "12 Mar 2002" "SunOS 5.11" "System Administration Commands"
+.TH CLINFO 1M "Mar 12, 2002"
 .SH NAME
 clinfo \- display cluster information
 .SH SYNOPSIS
@@ -28,12 +28,10 @@ an exit status of \fB1\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 6n
-.rt  
 Displays the highest node number allowed to be configured. This is different
 from the maximum number of nodes supported in a given cluster. The current
 highest configured node number can change immediately after the command returns
@@ -47,12 +45,10 @@ can use to determine the number of nodes in a cluster.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 6n
-.rt  
 Prints the number of the node from which \fBclinfo\fR is executed.
 .RE
 
@@ -62,23 +58,19 @@ Prints the number of the node from which \fBclinfo\fR is executed.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 An error occurred.
 .sp
 This is usually because the node is not configured or booted as part of a
diff --git a/usr/src/man/man1m/clri.1m b/usr/src/man/man1m/clri.1m
index c656121b48..43fa71abac 100644
--- a/usr/src/man/man1m/clri.1m
+++ b/usr/src/man/man1m/clri.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH clri 1M "16 Sep 1996" "SunOS 5.11" "System Administration Commands"
+.TH CLRI 1M "Sep 16, 1996"
 .SH NAME
 clri, dcopy \- clear inode
 .SH SYNOPSIS
@@ -42,12 +42,10 @@ whole cycle is likely to be repeated again and again.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fI FSType\fR\fR
 .ad
 .RS 13n
-.rt  
 Specify the  \fIFSType\fR on which to operate. The  \fIFSType\fR should either
 be specified here or be determinable from  \fB/etc/vfstab\fR by matching
 \fIspecial\fR with an entry in the table, or by consulting
@@ -56,12 +54,10 @@ be specified here or be determinable from  \fB/etc/vfstab\fR by matching
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
 .RS 13n
-.rt  
 Echo the complete command line, but do not execute the command. The command
 line is generated by using the options and arguments provided by the user and
 adding to them information derived from \fB/etc/vfstab\fR. This option should
@@ -77,23 +73,19 @@ bytes).
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/fs\fR\fR
 .ad
 .RS 19n
-.rt  
 Default local file system type
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vfstab\fR\fR
 .ad
 .RS 19n
-.rt  
 List of default parameters for each file system
 .RE
 
diff --git a/usr/src/man/man1m/consadm.1m b/usr/src/man/man1m/consadm.1m
index aeaec80d38..6a173559c5 100644
--- a/usr/src/man/man1m/consadm.1m
+++ b/usr/src/man/man1m/consadm.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH consadm 1m "27 Oct 2004" "SunOS 5.11" "System Administration Commands"
+.TH CONSADM 1M "Oct 27, 2004"
 .SH NAME
 consadm \- select or display devices used as auxiliary console devices
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/consadm\fR 
+\fB/usr/sbin/consadm\fR
 .fi
 
 .LP
@@ -69,12 +69,10 @@ as the system console.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIdevice\fR\fR
 .ad
 .RS 13n
-.rt  
 Adds \fIdevice\fR to the list of auxiliary console devices. Specify
 \fIdevice\fR as the path name to the device or devices to be added to the
 auxiliary console device list.
@@ -82,12 +80,10 @@ auxiliary console device list.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdevice\fR\fR
 .ad
 .RS 13n
-.rt  
 Removes \fIdevice\fR from the list of auxiliary console devices. Specify
 \fIdevice\fR as the path name to the device or devices to be removed from the
 auxiliary console device list.
@@ -95,12 +91,10 @@ auxiliary console device list.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 13n
-.rt  
 Prints the list of auxiliary consoles that will be auxiliary across reboots.
 .sp
 When invoked with the \fB-a\fR or \fB-d\fR options , tells the application to
@@ -168,23 +162,19 @@ and \fBNLSPATH\fR.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -196,13 +186,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Stability LevelEvolving
+Stability Level	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/conv_lp.1m b/usr/src/man/man1m/conv_lp.1m
index a19687e4ac..8463ee775c 100644
--- a/usr/src/man/man1m/conv_lp.1m
+++ b/usr/src/man/man1m/conv_lp.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH conv_lp 1M "9 Sep 1996" "SunOS 5.11" "System Administration Commands"
+.TH CONV_LP 1M "Sep 9, 1996"
 .SH NAME
 conv_lp \- convert LP configuration
 .SH SYNOPSIS
@@ -23,24 +23,20 @@ directory and converts it to an output file for use with print client software.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fI dir\fR\fR
 .ad
 .RS 11n
-.rt  
 The root (`\fB / \fR') directory from which  \fBLP\fR configuration information
 is read.   The default is root (`\fB / \fR').
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fI file\fR\fR
 .ad
 .RS 11n
-.rt  
 The output file to which  \fBconv_lp\fR writes the converted  \fBLP\fR
 configuration information.  The default is \fB/etc/printers.conf\fR.
 .RE
@@ -74,7 +70,7 @@ directory \fB/export/root/client\fR to file
 .sp
 .in +2
 .nf
-% \fBconv_lp -d /export/root/client -f\e 
+% \fBconv_lp -d /export/root/client -f\e
    /export/root/client/etc/printers.conf\fR
 .fi
 .in -2
@@ -86,35 +82,29 @@ directory \fB/export/root/client\fR to file
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-zero\fR
 .ad
 .RS 12n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/printers.conf\fR\fR
 .ad
 .RS 22n
-.rt  
 System printer configuration database.
 .RE
 
diff --git a/usr/src/man/man1m/conv_lpd.1m b/usr/src/man/man1m/conv_lpd.1m
index b002410de9..05efea6f71 100644
--- a/usr/src/man/man1m/conv_lpd.1m
+++ b/usr/src/man/man1m/conv_lpd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH conv_lpd 1M "9 Sep 1996" "SunOS 5.11" "System Administration Commands"
+.TH CONV_LPD 1M "Sep 9, 1996"
 .SH NAME
 conv_lpd \- convert LPD configuration
 .SH SYNOPSIS
@@ -28,12 +28,10 @@ is in  \fBprinters.conf\fR format, it converts it to a \fBprintcap\fR file. If
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-c\fR\fB printers \fR|\fB \fR\fB-c\fR\fB printcap\fR\fR
 .ad
 .RS 29n
-.rt  
 Specifies the type of output file produced by the conversion. \fB-c\fR
 \fBprinters\fR converts to a \fBprinters.conf\fR file.  \fB-c\fR \fBprintcap\fR
 converts to a \fBprintcap\fR file. \fB-c\fR \fBprinters\fR is the default.
@@ -41,12 +39,10 @@ converts to a \fBprintcap\fR file. \fB-c\fR \fBprinters\fR is the default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 29n
-.rt  
 Preserves the namelist during the conversion.
 .RE
 
@@ -56,12 +52,10 @@ Preserves the namelist during the conversion.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfile\fR\fR
 .ad
 .RS 8n
-.rt  
 The file to be converted.
 .RE
 
@@ -120,46 +114,38 @@ file and preserves the namelist.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-zero\fR
 .ad
 .RS 12n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/printers.conf\fR\fR
 .ad
 .RS 22n
-.rt  
 System printer configuration database.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/printcap\fR\fR
 .ad
 .RS 22n
-.rt  
 SunOS 4.\fIx\fR printer capability database.
 .RE
 
diff --git a/usr/src/man/man1m/coreadm.1m b/usr/src/man/man1m/coreadm.1m
index c58d568df9..f5f7083d87 100644
--- a/usr/src/man/man1m/coreadm.1m
+++ b/usr/src/man/man1m/coreadm.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH coreadm 1M "30 Sep 2008" "SunOS 5.11" "System Administration Commands"
+.TH COREADM 1M "Sep 30, 2008"
 .SH NAME
 coreadm \- core file administration
 .SH SYNOPSIS
 .LP
 .nf
-\fBcoreadm\fR [\fB-g\fR \fIpattern\fR] [\fB-G\fR \fIcontent\fR] [\fB-i\fR \fIpattern\fR] [\fB-I\fR \fIcontent\fR] 
+\fBcoreadm\fR [\fB-g\fR \fIpattern\fR] [\fB-G\fR \fIcontent\fR] [\fB-i\fR \fIpattern\fR] [\fB-I\fR \fIcontent\fR]
      [\fB-d\fR \fIoption\fR]... [\fB-e\fR \fIoption\fR]...
 .fi
 
@@ -43,7 +43,6 @@ expanded from values that are effective when a core file is generated by the
 operating system. The possible embedded variables are as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%d\fR\fR
 .ad
@@ -54,7 +53,6 @@ Executable file directory name, up to a maximum of \fBMAXPATHLEN\fR characters
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%f\fR\fR
 .ad
@@ -65,7 +63,6 @@ Executable file name, up to a maximum of \fBMAXCOMLEN\fR characters
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%g\fR\fR
 .ad
@@ -76,7 +73,6 @@ Effective group-\fBID\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%m\fR\fR
 .ad
@@ -87,7 +83,6 @@ Machine name (\fBuname\fR \fB-m\fR)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%n\fR\fR
 .ad
@@ -98,7 +93,6 @@ System node name (\fBuname\fR \fB-n\fR)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%p\fR\fR
 .ad
@@ -109,7 +103,6 @@ Process-\fBID\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%t\fR\fR
 .ad
@@ -120,7 +113,6 @@ Decimal value of \fBtime\fR(2)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%u\fR\fR
 .ad
@@ -131,7 +123,6 @@ Effective user-\fBID\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%z\fR\fR
 .ad
@@ -142,7 +133,6 @@ Name of the zone in which process executed (\fBzonename\fR)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%%\fR\fR
 .ad
@@ -162,7 +152,6 @@ A core file content description is specified using a series of tokens to
 identify parts of a process's binary image:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBanon\fR\fR
 .ad
@@ -174,7 +163,6 @@ stacks
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBctf\fR\fR
 .ad
@@ -185,7 +173,6 @@ CTF type information sections for loaded object files
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdata\fR\fR
 .ad
@@ -196,7 +183,6 @@ Writable private file mappings
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdism\fR\fR
 .ad
@@ -207,7 +193,6 @@ DISM mappings
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBheap\fR\fR
 .ad
@@ -218,7 +203,6 @@ Process heap
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBism\fR\fR
 .ad
@@ -229,7 +213,6 @@ ISM mappings
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrodata\fR\fR
 .ad
@@ -240,7 +223,6 @@ Read-only private file mappings
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshanon\fR\fR
 .ad
@@ -251,7 +233,6 @@ Anonymous shared mappings
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshfile\fR\fR
 .ad
@@ -262,7 +243,6 @@ Shared mappings that are backed by files
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshm\fR\fR
 .ad
@@ -273,7 +253,6 @@ System V shared memory
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstack\fR\fR
 .ad
@@ -284,7 +263,6 @@ Process stack
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsymtab\fR\fR
 .ad
@@ -295,7 +273,6 @@ Symbol table sections for loaded object files
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtext\fR\fR
 .ad
@@ -388,7 +365,6 @@ not have access. If \fBsetid\fR core files are enabled, they are created mode
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIoption\fR...\fR
 .ad
@@ -404,7 +380,6 @@ use this option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIoption\fR...\fR
 .ad
@@ -414,7 +389,6 @@ Enable the specified core file option. Specify \fIoption\fR as one of the
 following:
 .sp
 .ne 2
-.mk
 .na
 \fBglobal\fR
 .ad
@@ -425,7 +399,6 @@ Allow core dumps that use global core pattern.
 
 .sp
 .ne 2
-.mk
 .na
 \fBglobal-setid\fR
 .ad
@@ -436,7 +409,6 @@ Allow set-id core dumps that use global core pattern.
 
 .sp
 .ne 2
-.mk
 .na
 \fBlog\fR
 .ad
@@ -448,7 +420,6 @@ attempted.
 
 .sp
 .ne 2
-.mk
 .na
 \fBprocess\fR
 .ad
@@ -459,7 +430,6 @@ Allow core dumps that use per-process core pattern.
 
 .sp
 .ne 2
-.mk
 .na
 \fBproc-setid\fR
 .ad
@@ -476,7 +446,6 @@ use this option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR \fIpattern\fR\fR
 .ad
@@ -492,7 +461,6 @@ use this option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-G\fR \fIcontent\fR\fR
 .ad
@@ -507,7 +475,6 @@ use this option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIpattern\fR\fR
 .ad
@@ -525,7 +492,6 @@ use this option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR \fIcontent\fR\fR
 .ad
@@ -543,7 +509,6 @@ use this option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIpattern\fR\fR
 .ad
@@ -567,7 +532,6 @@ shell that ran \fBcoreadm\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIcontent\fR\fR
 .ad
@@ -593,7 +557,6 @@ file content to \fIcontent\fR on the parent process (usually the shell that ran
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpid\fR\fR
 .ad
@@ -663,7 +626,6 @@ example# coreadm -G all -g /var/cores/%d/%f.%p.%n
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/cores\fR\fR
 .ad
@@ -678,7 +640,6 @@ Directory provided for global core file storage.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB0\fR
 .ad
@@ -689,7 +650,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB1\fR
 .ad
@@ -701,7 +661,6 @@ configuration.
 
 .sp
 .ne 2
-.mk
 .na
 \fB2\fR
 .ad
diff --git a/usr/src/man/man1m/cpustat.1m b/usr/src/man/man1m/cpustat.1m
index 85b5b2654d..e5a1a7c6c4 100644
--- a/usr/src/man/man1m/cpustat.1m
+++ b/usr/src/man/man1m/cpustat.1m
@@ -1,6 +1,6 @@
 '\" te
 .\" Copyright (c) 2005, Sun Microsystems, Inc.
-.TH cpustat 1M "16 Jun 2009" "SunOS 5.11" "System Administration Commands"
+.TH CPUSTAT 1M "Jun 16, 2009"
 .SH NAME
 cpustat \- monitor system behavior using CPU performance counters
 .SH SYNOPSIS
@@ -33,7 +33,6 @@ samples that are taken.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIeventspec\fR\fR
 .ad
@@ -70,7 +69,6 @@ between the different event settings on each sample.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
@@ -81,7 +79,6 @@ Enables debug mode.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -93,7 +90,6 @@ the processor-dependent counters.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -105,7 +101,6 @@ pipeline).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIperiod\fR\fR
 .ad
@@ -123,7 +118,6 @@ take). If \fIperiod\fR is less than the number of \fIeventspec\fRs times
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
@@ -139,7 +133,6 @@ triggering system-mode events.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fBu\fR | \fBd\fR\fR
 .ad
@@ -154,7 +147,6 @@ time. See \fBtime\fR(2). Specify \fBd\fR for standard date format. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
@@ -260,15 +252,15 @@ instructions in user and system mode on a Pentium 4 machine.
  example% cpustat -c \e
     pic12=branch_retired,emask12=0x4,pic14=branch_retired,\e
     emask14=0xf,sys 1 3
-  
+
     time cpu event      pic12     pic14
-   1.010   1  tick       458       684 
-   1.010   0  tick       305       511 
-   2.010   0  tick       181       269 
-   2.010   1  tick       469       684 
-   3.010   0  tick       182       269 
-   3.010   1  tick       468       684 
-   3.010   2 total      2063      3101 
+   1.010   1  tick       458       684
+   1.010   0  tick       305       511
+   2.010   0  tick       181       269
+   2.010   1  tick       469       684
+   3.010   0  tick       182       269
+   3.010   1  tick       468       684
+   3.010   2 total      2063      3101
 .fi
 .in -2
 .sp
@@ -338,13 +330,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/cron.1m b/usr/src/man/man1m/cron.1m
index b6cd81f8d8..840d48af8e 100644
--- a/usr/src/man/man1m/cron.1m
+++ b/usr/src/man/man1m/cron.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH cron 1M "4 Feb 2009" "SunOS 5.11" "System Administration Commands"
+.TH CRON 1M "Feb 4, 2009"
 .SH NAME
 cron \- clock daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/cron\fR 
+\fB/usr/sbin/cron\fR
 .fi
 
 .SH DESCRIPTION
@@ -97,78 +97,64 @@ The \fBcron\fR log file is periodically rotated by \fBlogadm\fR(1M).
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/cron.d\fR\fR
 .ad
 .RS 25n
-.rt  
 Main \fBcron\fR directory
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/cron.d/FIFO\fR\fR
 .ad
 .RS 25n
-.rt  
 Lock file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/cron\fR\fR
 .ad
 .RS 25n
-.rt  
 \fBcron\fR default settings file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/cron/log\fR\fR
 .ad
 .RS 25n
-.rt  
 \fBcron\fR history information
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/spool/cron\fR\fR
 .ad
 .RS 25n
-.rt  
 Spool area
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/cron.d/queuedefs\fR\fR
 .ad
 .RS 25n
-.rt  
 Queue description file for \fBat\fR, \fBbatch\fR, and \fBcron\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/logadm.conf\fR\fR
 .ad
 .RS 25n
-.rt  
 Configuration file for \fBlogadm\fR
 .RE
 
diff --git a/usr/src/man/man1m/cryptoadm.1m b/usr/src/man/man1m/cryptoadm.1m
index e41d15636a..4f650a9841 100644
--- a/usr/src/man/man1m/cryptoadm.1m
+++ b/usr/src/man/man1m/cryptoadm.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH cryptoadm 1M "1 Sep 2009" "SunOS 5.11" "System Administration Commands"
+.TH CRYPTOADM 1M "Sep 1, 2009"
 .SH NAME
 cryptoadm \- cryptographic framework administration
 .SH SYNOPSIS
 .LP
 .nf
-\fBcryptoadm\fR list [\fB-mpv\fR] [provider=\fIprovider-name\fR] 
+\fBcryptoadm\fR list [\fB-mpv\fR] [provider=\fIprovider-name\fR]
      [mechanism=\fImechanism-list\fR]
 .fi
 
@@ -32,7 +32,7 @@ cryptoadm \- cryptographic framework administration
 
 .LP
 .nf
-\fBcryptoadm\fR install provider=\fIprovider-name\fR 
+\fBcryptoadm\fR install provider=\fIprovider-name\fR
      [mechanism=\fImechanism-list\fR]
 .fi
 
@@ -149,7 +149,6 @@ The \fBcryptoadm\fR utility has the various combinations of subcommands and
 options shown below.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcryptoadm\fR \fBlist\fR\fR
 .ad
@@ -160,7 +159,6 @@ Display the list of installed providers.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcryptoadm\fR \fBlist metaslot\fR\fR
 .ad
@@ -171,7 +169,6 @@ Display the system-wide configuration for metaslot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcryptoadm\fR \fBlist\fR \fB-m\fR \fB[ provider=\fIprovider-name\fR |
 metaslot ]\fR\fR
@@ -187,7 +184,6 @@ with metaslot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcryptoadm\fR \fBlist\fR \fB-p\fR \fB[ provider=\fIprovider-name\fR |
 metaslot ]\fR\fR
@@ -203,7 +199,6 @@ display the mechanism policy enforced on the metaslot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcryptoadm\fR \fBlist\fR \fB-v\fR \fBprovider=\fIprovider-name\fR |
 metaslot\fR\fR
@@ -216,7 +211,6 @@ metaslot keyword is specified, display details about the metaslot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -229,7 +223,6 @@ mechanisms and slots.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcryptoadm\fR \fBdisable provider=\fIprovider-name\fR\fR\fR
 .ad
@@ -247,7 +240,6 @@ OPERANDS for a description of \fImechanism\fR, \fIprovider-feature\fR, and the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcryptoadm\fR \fB[ mechanism=\fImechanism-list\fR ] [ auto-key-migrate
 ]\fR\fR
@@ -267,7 +259,6 @@ of \fBauto-key-migrate\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcryptoadm\fR \fBenable provider=\fIprovider-name\fR\fR\fR
 .ad
@@ -285,7 +276,6 @@ OPERANDS for a description of \fImechanism\fR, \fIprovider-feature\fR, and the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcryptoadm\fR \fBenable metaslot [ mechanism=\fImechanism-list\fR ]
 |\fR\fR
@@ -317,7 +307,6 @@ mechanism, token, slot, \fBdefault-keystore\fR, and \fBauto-key-migrate\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcryptoadm\fR \fBinstall provider=\fIprovider-name\fR\fR\fR
 .ad
@@ -340,7 +329,6 @@ Guide\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcryptoadm\fR \fBinstall provider=\fIprovider-name\fR\fR\fR
 .ad
@@ -361,7 +349,6 @@ Developer's Guide\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcryptoadm\fR \fBuninstall provider=\fIprovider-name\fR\fR\fR
 .ad
@@ -374,7 +361,6 @@ software provider.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcryptoadm\fR \fBunload provider=\fIprovider-name\fR\fR\fR
 .ad
@@ -385,7 +371,6 @@ Unload the kernel software module specified by \fIprovider\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcryptoadm\fR \fBdisable fips-140\fR\fR
 .ad
@@ -396,7 +381,6 @@ Disable FIPS-140 mode in the Cryptographic Framework.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcryptoadm\fR \fBenable fips-140\fR\fR
 .ad
@@ -420,7 +404,6 @@ cryptographic algorithm test and a software integrity test.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcryptoadm\fR \fBlist fips-140\fR\fR
 .ad
@@ -433,7 +416,6 @@ FIPS-140 mode is \fBdisabled\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcryptoadm\fR \fBrefresh\fR\fR
 .ad
@@ -452,7 +434,6 @@ Private interfaces for use by \fBsmf\fR(5), these must not be used directly.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcryptoadm\fR \fB-help\fR\fR
 .ad
@@ -464,7 +445,6 @@ Display the command usage.
 .SH OPERANDS
 .sp
 .ne 2
-.mk
 .na
 \fBprovider=\fIprovider-name\fR\fR
 .ad
@@ -484,7 +464,6 @@ base name only. A \fIprovider\fR operand for a kernel hardware provider is in a
 
 .sp
 .ne 2
-.mk
 .na
 \fBmechanism=\fImechanism-list\fR\fR
 .ad
@@ -498,7 +477,6 @@ mechanisms on a provider. See the discussion of the \fBall\fR keyword, below.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIprovider-feature\fR\fR
 .ad
@@ -514,7 +492,6 @@ numbers from the provider.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBall\fR\fR
 .ad
@@ -526,7 +503,6 @@ subcommands to operate on all provider features.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtoken=\fR\fItoken-label\fR\fR
 .ad
@@ -540,7 +516,6 @@ from the output of the command \fBcryptoadm list\fR \fB-v\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBslot=\fR\fIslot-description\fR\fR
 .ad
@@ -555,7 +530,6 @@ the output of the command \fBcryptoadm list\fR \fB-v\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdefault-keystore\fR\fR
 .ad
@@ -568,7 +542,6 @@ default store.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBauto-key-migrate\fR\fR
 .ad
@@ -639,7 +612,7 @@ user-level providers:
 /usr/lib/security/$ISA/pkcs11_softtoken.so
 /opt/lib/libcryptoki.so.1
 /opt/SUNWconn/lib/$ISA/libpkcs11.so.1
-  
+
 kernel software providers:
     des
     aes
@@ -795,7 +768,6 @@ example# \fBcryptoadm enable metaslot token="SUNW,venus"\fR
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -806,7 +778,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
@@ -823,13 +794,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below
+Interface Stability	See below
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/cvcd.1m b/usr/src/man/man1m/cvcd.1m
index 735ceb7ca7..56d349478c 100644
--- a/usr/src/man/man1m/cvcd.1m
+++ b/usr/src/man/man1m/cvcd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH cvcd 1M "9 Mar 2006" "SunOS 5.11" "System Administration Commands"
+.TH CVCD 1M "Mar 9, 2006"
 .SH NAME
 cvcd \- virtual console daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fB/platform\fI\fR/\fIplatform_name\fR/cvcd\fR [\fB-a\fR \fIauth\fR] [\fB-e\fR \fIencr\fR] 
+\fB/platform\fI\fR/\fIplatform_name\fR/cvcd\fR [\fB-a\fR \fIauth\fR] [\fB-e\fR \fIencr\fR]
      [\fB-u\fR \fIesp_auth\fR]
 .fi
 
@@ -49,36 +49,30 @@ through the options described below. See \fBipsec\fR(7P).
 The \fBcvcd\fR daemon supports the options listed below.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIauth\fR\fR
 .ad
 .RS 15n
-.rt  
 Controls the IPsec Authentication Header (AH) algorithm. \fIauth\fR can be one
 of \fBnone\fR, \fBmd5\fR, or \fBsha1\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIencr\fR\fR
 .ad
 .RS 15n
-.rt  
 Controls the IPsec Encapsulating Security Payload (ESP) encryption algorithm.
 \fIencr\fR can be one of \fBnone\fR, \fBdes\fR, or \fB3des\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIesp_auth\fR\fR
 .ad
 .RS 15n
-.rt  
 Controls the IPsec Encapsulating Security Payload (ESP) authentication
 algorithm. \fIesp_auth\fR can be one of \fBnone\fR, \fBmd5\fR, or \fBsha1\fR.
 .RE
@@ -89,12 +83,10 @@ algorithm. \fIesp_auth\fR can be one of \fBnone\fR, \fBmd5\fR, or \fBsha1\fR.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIplatform_name\fR\fR
 .ad
 .RS 17n
-.rt  
 The official Sun platform name used in packaging and code. For example, for Sun
 Fire 15K servers, the \fIplatform_name\fR would be \fBSUNW,Sun-Fire-15000\fR.
 .RE
@@ -127,13 +119,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-ArchitectureT{
+Architecture	T{
 Sun Enterprise 10000 servers, Sun Fire High-End Systems
 T}
 .TE
diff --git a/usr/src/man/man1m/datadm.1m b/usr/src/man/man1m/datadm.1m
index e80344e5da..00051afab3 100644
--- a/usr/src/man/man1m/datadm.1m
+++ b/usr/src/man/man1m/datadm.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH datadm 1M "18 Jun 2004" "SunOS 5.11" "System Administration Commands"
+.TH DATADM 1M "Jun 18, 2004"
 .SH NAME
 datadm \- maintain DAT static registry file
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/bin/datadm\fR [\fB-v\fR] [\fB-u\fR] [\fB-a\fR service_provider.conf] 
+\fB/usr/bin/datadm\fR [\fB-v\fR] [\fB-u\fR] [\fB-a\fR service_provider.conf]
      [\fB-r\fR service_provider.conf]
 .fi
 
@@ -35,12 +35,10 @@ regenerated.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fBservice_provider.conf\fR\fR
 .ad
 .RS 28n
-.rt  
 Enumerate each device entry in the \fBservice_provider.conf\fR(4) file into a
 list of interface adapters, that is, interfaces to external network that are
 available to uDAPL consumers.
@@ -48,24 +46,20 @@ available to uDAPL consumers.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fBservice_provider.conf\fR\fR
 .ad
 .RS 28n
-.rt  
 Remove the list of interface adapters that corresponds to the device entry in
 the \fBservice_provider.conf\fR(4) file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
 .RS 28n
-.rt  
 Update the \fBdat.conf\fR to reflect the current state of the system with an up
 to date set of interface adapters for the service providers that are currently
 listed in the DAT static registry.
@@ -73,12 +67,10 @@ listed in the DAT static registry.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 28n
-.rt  
 Display the DAT static registry file, \fBdat.conf\fR.
 .RE
 
@@ -172,7 +164,7 @@ a new entry added reflecting the current state of the system.
 .in +2
 .nf
 ibd0 u1.2 nonthreadsafe default udapl_tavor.so.1 SUNW.1.0 ""
-"driver_name=tavor" 
+"driver_name=tavor"
 ibd1 u1.2 nonthreadsafe default udapl_tavor.so.1 SUNW.1.0 ""
 "driver_name=tavor"
 ibd2 u1.2 nonthreadsafe default udapl_tavor.so.1 SUNW.1.0 ""
@@ -184,12 +176,10 @@ ibd2 u1.2 nonthreadsafe default udapl_tavor.so.1 SUNW.1.0 ""
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dat/dat.conf\fR\fR
 .ad
 .RS 21n
-.rt  
 DAT static registry file
 .RE
 
@@ -201,13 +191,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/dcs.1m b/usr/src/man/man1m/dcs.1m
index dde18a686b..e257bb081d 100644
--- a/usr/src/man/man1m/dcs.1m
+++ b/usr/src/man/man1m/dcs.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH dcs 1M "25 Apr 2006" "SunOS 5.11" "System Administration Commands"
+.TH DCS 1M "Apr 25, 2006"
 .SH NAME
 dcs \- domain configuration server
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/dcs\fR [\fB-s\fR \fIsessions\fR] 
+\fB/usr/lib/dcs\fR [\fB-s\fR \fIsessions\fR]
      [ [\fB-a\fR \fIauth\fR] [\fB-e\fR \fIencr\fR] [\fB-u\fR \fIesp_auth\fR] ] [\fB-l\fR]
 .fi
 
@@ -73,48 +73,40 @@ should be used on SPARC Enterprise Servers.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIauth\fR\fR
 .ad
 .RS 15n
-.rt  
 Controls the IPsec Authentication Header (AH) algorithm. \fIauth\fR can be one
 of \fBnone\fR, \fBmd5\fR, or \fBsha1\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIencr\fR\fR
 .ad
 .RS 15n
-.rt  
 Controls the IPsec Encapsulating Security Payload (ESP) encryption algorithm.
 \fIencr\fR can be one of \fBnone\fR, \fBdes\fR, or \fB3des\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 15n
-.rt  
 Enables the use of platform-specific security options on SPARC Enterprise
 Servers.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsessions\fR\fR
 .ad
 .RS 15n
-.rt  
 Sets the number of active sessions that the DCS allows at any one time. When
 the limit is reached, the DCS stops accepting connections until active sessions
 complete the execution of their DR operation. If this option is not specified,
@@ -123,12 +115,10 @@ a default value of 128 is used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIesp_auth\fR\fR
 .ad
 .RS 15n
-.rt  
 Controls the IPsec Encapsulating Security Payload (ESP) authentication
 algorithm. \fIesp_auth\fR can be one of \fBnone\fR, \fBmd5\fR, or \fBsha1\fR.
 .RE
@@ -170,13 +160,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/dd.1m b/usr/src/man/man1m/dd.1m
index c57030459e..ec3b8c4dd6 100644
--- a/usr/src/man/man1m/dd.1m
+++ b/usr/src/man/man1m/dd.1m
@@ -2,14 +2,14 @@
 .\" Copyright (c) 1992, X/Open Company Limited  All Rights Reserved
 .\" Copyright 1989 AT&T
 .\" Portions Copyright (c) 1995, Sun Microsystems, Inc.  All Rights Reserved
-.\" Sun Microsystems, Inc. gratefully acknowledges The Open Group for permission to reproduce portions of its copyrighted documentation. Original documentation from The Open Group can be obtained online at 
+.\" Sun Microsystems, Inc. gratefully acknowledges The Open Group for permission to reproduce portions of its copyrighted documentation. Original documentation from The Open Group can be obtained online at
 .\" http://www.opengroup.org/bookstore/.
 .\" The Institute of Electrical and Electronics Engineers and The Open Group, have given us permission to reprint portions of their documentation. In the following statement, the phrase "this text" refers to portions of the system documentation. Portions of this text are reprinted and reproduced in electronic form in the Sun OS Reference Manual, from IEEE Std 1003.1, 2004 Edition, Standard for Information Technology -- Portable Operating System Interface (POSIX), The Open Group Base Specifications Issue 6, Copyright (C) 2001-2004 by the Institute of Electrical and Electronics Engineers, Inc and The Open Group. In the event of any discrepancy between these versions and the original IEEE and The Open Group Standard, the original IEEE and The Open Group Standard is the referee document. The original Standard can be obtained online at http://www.opengroup.org/unix/online.html.
 .\"  This notice shall appear on any product containing this material.
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH dd 1M "16 Sep 1996" "SunOS 5.11" "System Administration Commands"
+.TH DD 1M "Sep 16, 1996"
 .SH NAME
 dd \- convert and copy a file
 .SH SYNOPSIS
@@ -58,7 +58,6 @@ output blocks.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBif=\fR\fIfile\fR\fR
 .ad
@@ -69,7 +68,6 @@ Specifies the input path. Standard input is the default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBof=\fR\fIfile\fR\fR
 .ad
@@ -87,7 +85,6 @@ size of the output file, the output file is shortened by the copy.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBibs=\fR\fIn\fR\fR
 .ad
@@ -98,7 +95,6 @@ Specifies the input block size in \fIn\fR bytes (default is \fB512\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBobs=\fR\fIn\fR\fR
 .ad
@@ -109,7 +105,6 @@ Specifies the output block size in \fIn\fR bytes (default is \fB512\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbs=\fR\fIn\fR\fR
 .ad
@@ -123,7 +118,6 @@ single block without aggregating short blocks.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcbs=\fR\fIn\fR\fR
 .ad
@@ -145,7 +139,6 @@ characters are added.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfiles=\fR\fIn\fR\fR
 .ad
@@ -157,7 +150,6 @@ only where input is a magnetic tape or similar device).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBskip=\fR\fIn\fR\fR
 .ad
@@ -171,7 +163,6 @@ discarded.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBiseek=\fR\fIn\fR\fR
 .ad
@@ -183,7 +174,6 @@ for disk files, where \fBskip\fR can be incredibly slow).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBoseek=\fR\fIn\fR\fR
 .ad
@@ -194,7 +184,6 @@ Seeks \fIn\fR blocks from beginning of output file before copying.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBseek=\fR\fIn\fR\fR
 .ad
@@ -209,7 +198,6 @@ offset or reads the blocks as described for non-seekable files.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcount=\fR\fIn\fR\fR
 .ad
@@ -220,7 +208,6 @@ Copies only \fIn\fR input blocks.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconv=\fR\fIvalue\fR[\fB,\fR\fIvalue\fR.\|.\|.\|]\fR
 .ad
@@ -229,35 +216,29 @@ Copies only \fIn\fR input blocks.
 Where \fIvalue\fRs are comma-separated symbols from the following list:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBascii\fR\fR
 .ad
 .RS 11n
-.rt  
 Converts \fBEBCDIC\fR to \fBASCII\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBasciib\fR\fR
 .ad
 .RS 11n
-.rt  
 Converts \fBEBCDIC\fR to \fBASCII\fR using \fBBSD\fR-compatible character
 translations.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBebcdic\fR\fR
 .ad
 .RS 11n
-.rt  
 Converts \fBASCII\fR to \fBEBCDIC\fR. If converting fixed-length \fBASCII\fR
 records without NEWLINEs, sets up a pipeline with \fBdd conv=unblock\fR
 beforehand.
@@ -265,12 +246,10 @@ beforehand.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBebcdicb\fR\fR
 .ad
 .RS 11n
-.rt  
 Converts \fBASCII\fR to \fBEBCDIC\fR using \fBBSD\fR-compatible character
 translations. If converting fixed-length \fBASCII\fR records without
 \fBNEWLINE\fRs, sets up a pipeline with \fBdd conv=unblock\fR beforehand.
@@ -278,12 +257,10 @@ translations. If converting fixed-length \fBASCII\fR records without
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBibm\fR\fR
 .ad
 .RS 11n
-.rt  
 Slightly different map of \fBASCII\fR to \fBEBCDIC\fR. If converting
 fixed-length \fBASCII\fR records without \fBNEWLINE\fRs, sets up a pipeline
 with \fBdd conv=unblock\fR beforehand.
@@ -291,12 +268,10 @@ with \fBdd conv=unblock\fR beforehand.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBibmb\fR\fR
 .ad
 .RS 11n
-.rt  
 Slightly different map of \fBASCII\fR to \fBEBCDIC\fR using
 \fBBSD\fR-compatible character translations. If converting fixed-length
 \fBASCII\fR records without \fBNEWLINE\fRs, sets up a pipeline with \fBdd
@@ -307,12 +282,10 @@ The \fBascii\fR (or \fBasciib\fR), \fBebcdic\fR (or \fBebcdicb\fR), and
 \fBibm\fR (or \fBibmb\fR) values are mutually exclusive.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBblock\fR\fR
 .ad
 .RS 11n
-.rt  
 Treats the input as a sequence of \fBNEWLINE\fR-terminated or
 \fBEOF\fR-terminated variable-length records independent of the input block
 boundaries. Each record is converted to a record with a fixed length specified
@@ -325,12 +298,10 @@ will fit into that size. The number of truncated lines is reported.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunblock\fR\fR
 .ad
 .RS 11n
-.rt  
 Converts fixed-length records to variable length. Reads a number of bytes equal
 to the conversion block size (or the number of bytes remaining in the input, if
 less than the conversion block size), delete all trailing \fBSPACE\fR
@@ -340,12 +311,10 @@ characters, and append a \fBNEWLINE\fR character.
 The  \fBblock\fR and \fBunblock\fR values are mutually exclusive.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlcase\fR\fR
 .ad
 .RS 9n
-.rt  
 Maps upper-case characters specified by the \fBLC_CTYPE\fR keyword
 \fBtolower\fR to the corresponding lower-case character. Characters for which
 no mapping is specified are not modified by this conversion.
@@ -353,12 +322,10 @@ no mapping is specified are not modified by this conversion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBucase\fR\fR
 .ad
 .RS 9n
-.rt  
 Maps lower-case characters specified by the \fBLC_CTYPE\fR keyword
 \fBtoupper\fR to the corresponding upper-case character. Characters for which
 no mapping is specified are not modified by this conversion.
@@ -367,24 +334,20 @@ no mapping is specified are not modified by this conversion.
 The \fBlcase\fR and \fBucase\fR symbols are mutually exclusive.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBswab\fR\fR
 .ad
 .RS 11n
-.rt  
 Swaps every pair of input bytes. If the current input record is an odd number
 of bytes, the last byte in the input record is ignored.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnoerror\fR\fR
 .ad
 .RS 11n
-.rt  
 Does not stop processing on an input error. When an input error occurs, a
 diagnostic message is written on standard error, followed by the current input
 and output block counts in the same format as used at completion. If the
@@ -395,12 +358,10 @@ the output.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnotrunc\fR\fR
 .ad
 .RS 11n
-.rt  
 Does not truncate the output file. Preserves blocks in the output file not
 explicitly written by this invocation of \fBdd\fR. (See also the preceding
 \fBof=\fR\fIfile\fR operand.)
@@ -408,12 +369,10 @@ explicitly written by this invocation of \fBdd\fR. (See also the preceding
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsync\fR\fR
 .ad
 .RS 11n
-.rt  
 Pads every input block to the size of the \fBibs=\fR buffer, appending null
 bytes. (If either \fBblock\fR or \fBunblock\fR is also specified, appends
 \fBSPACE\fR characters, rather than null bytes.)
@@ -532,23 +491,19 @@ that affect the execution of \fBdd\fR: \fBLANG\fR, \fBLC_ALL\fR,
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 The input file was copied successfully.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -567,13 +522,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStandard
+Interface Stability	Standard
 .TE
 
 .SH SEE ALSO
@@ -584,12 +538,10 @@ Interface StabilityStandard
 .SH DIAGNOSTICS
 .sp
 .ne 2
-.mk
 .na
 \fB\fBf+p records in(out)\fR\fR
 .ad
 .RS 23n
-.rt  
 numbers of full and partial blocks read(written)
 .RE
 
diff --git a/usr/src/man/man1m/devattr.1m b/usr/src/man/man1m/devattr.1m
index b9ec1fd5e4..7719564399 100644
--- a/usr/src/man/man1m/devattr.1m
+++ b/usr/src/man/man1m/devattr.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH devattr 1M "5 Jul 1990" "SunOS 5.11" "System Administration Commands"
+.TH DEVATTR 1M "Jul 5, 1990"
 .SH NAME
 devattr \- display device attributes
 .SH SYNOPSIS
@@ -28,12 +28,10 @@ line, only those attributes  are shown, displayed in command line order.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 Specifies verbose format. Attribute values are displayed in an
 \fIattribute\fR\fB=\fR\fIvalue\fR format.
 .RE
@@ -44,12 +42,10 @@ Specifies verbose format. Attribute values are displayed in an
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIattribute\fR\fR
 .ad
 .RS 13n
-.rt  
 Defines which attribute, or attributes, should be shown. Default is to show all
 attributes for a device. See the \fBputdev\fR(1M) manual page for a complete
 listing and description of available attributes.
@@ -57,12 +53,10 @@ listing and description of available attributes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdevice\fR\fR
 .ad
 .RS 13n
-.rt  
 Defines the device whose attributes should be displayed. Can be the pathname of
 the device or the device alias.
 .RE
@@ -73,57 +67,47 @@ the device or the device alias.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Command syntax was incorrect, invalid option was used, or an internal error
 occurred.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Device table could not be opened for reading.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 5n
-.rt  
 Requested device could not be found in the device table.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR\fR
 .ad
 .RS 5n
-.rt  
 Requested attribute was not defined for the specified device.
 .RE
 
diff --git a/usr/src/man/man1m/devfree.1m b/usr/src/man/man1m/devfree.1m
index f474ca359e..2e143e13c3 100644
--- a/usr/src/man/man1m/devfree.1m
+++ b/usr/src/man/man1m/devfree.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH devfree 1M "5 Jul 1990" "SunOS 5.11" "System Administration Commands"
+.TH DEVFREE 1M "Jul 5, 1990"
 .SH NAME
 devfree \- release devices from exclusive use
 .SH SYNOPSIS
@@ -29,24 +29,20 @@ devices that have been reserved with that  \fIkey\fR.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdevice\fR\fR
 .ad
 .RS 10n
-.rt  
 Defines device that this command will release from exclusive use. \fIdevice\fR
 can be the pathname of the device or the device alias.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIkey\fR\fR
 .ad
 .RS 10n
-.rt  
 Designates the unique key on which the device was reserved.
 .RE
 
@@ -56,46 +52,38 @@ Designates the unique key on which the device was reserved.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Command syntax was incorrect, an invalid option was used, or an internal error
 occurred.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Device table or device reservation table could not be opened for reading.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 5n
-.rt  
 Reservation release could not be completely fulfilled because one or more of
 the devices was not reserved or was not reserved on the specified key.
 .RE
@@ -103,24 +91,20 @@ the devices was not reserved or was not reserved on the specified key.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/device.tab\fR\fR
 .ad
 .RS 19n
-.rt  
- 
+
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/devlkfile\fR\fR
 .ad
 .RS 19n
-.rt  
- 
+
 .RE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/devfsadm.1m b/usr/src/man/man1m/devfsadm.1m
index 12bd6d3f1b..c5b55f52ee 100644
--- a/usr/src/man/man1m/devfsadm.1m
+++ b/usr/src/man/man1m/devfsadm.1m
@@ -3,19 +3,19 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH devfsadm 1M "23 Jun 2008" "SunOS 5.11" "System Administration Commands"
+.TH DEVFSADM 1M "Jun 23, 2008"
 .SH NAME
 devfsadm, devfsadmd \- administration command for /dev
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/devfsadm\fR [\fB-C\fR] [\fB-c\fR \fIdevice_class\fR] [\fB-i\fR \fIdriver_name\fR] 
+\fB/usr/sbin/devfsadm\fR [\fB-C\fR] [\fB-c\fR \fIdevice_class\fR] [\fB-i\fR \fIdriver_name\fR]
      [ \fB-n\fR] [\fB-r\fR \fIroot_dir\fR] [\fB-s\fR] [\fB-t\fR \fItable_file\fR] [\fB-v\fR]
 .fi
 
 .LP
 .nf
-\fB/usr/lib/devfsadm/devfsadmd\fR 
+\fB/usr/lib/devfsadm/devfsadmd\fR
 .fi
 
 .SH DESCRIPTION
@@ -52,12 +52,10 @@ In addition to managing \fB/dev\fR, \fBdevfsadm\fR also maintains the
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR\fR
 .ad
 .RS 19n
-.rt  
 Cleanup mode. Prompt \fBdevfsadm\fR to cleanup dangling \fB/dev\fR links that
 are not normally removed. If the \fB-c\fR option is also used, \fBdevfsadm\fR
 only cleans up for the listed devices' classes.
@@ -65,12 +63,10 @@ only cleans up for the listed devices' classes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIdevice_class\fR\fR
 .ad
 .RS 19n
-.rt  
 Restrict operations to devices of class \fIdevice_class\fR. Solaris defines the
 following values for \fIdevice_class\fR: \fBdisk\fR, \fBtape\fR, \fBport\fR,
 \fBaudio\fR, and \fBpseudo\fR. This option might be specified more than once to
@@ -79,58 +75,48 @@ specify multiple device classes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIdriver_name\fR\fR
 .ad
 .RS 19n
-.rt  
 Configure only the devices for the named driver, \fIdriver_name\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 19n
-.rt  
 Do not attempt to load drivers or add new nodes to the kernel device tree.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 19n
-.rt  
 Suppress any changes to \fB/dev\fR. This is useful with the \fB-v\fR option for
 debugging.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fItable_file\fR\fR
 .ad
 .RS 19n
-.rt  
 Read an alternate \fBdevlink.tab\fR file. \fBdevfsadm\fR normally reads
 \fB/etc/devlink.tab\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIroot_dir\fR\fR
 .ad
 .RS 19n
-.rt  
 Presume that the \fB/dev\fR directory trees are found under \fIroot_dir\fR, not
 directly under \fBroot\fR (\fB/\fR). No other use or assumptions are made about
 \fIroot_dir\fR.
@@ -138,12 +124,10 @@ directly under \fBroot\fR (\fB/\fR). No other use or assumptions are made about
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 19n
-.rt  
 Print changes to \fB/dev\fR in verbose mode.
 .RE
 
@@ -153,30 +137,25 @@ Print changes to \fB/dev\fR in verbose mode.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/devices\fR\fR
 .ad
@@ -187,7 +166,6 @@ device nodes directory
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev\fR\fR
 .ad
@@ -198,7 +176,6 @@ logical symbolic links to /devices
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/devfsadm/devfsadmd\fR\fR
 .ad
@@ -209,7 +186,6 @@ devfsadm daemon
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/.devfsadm_dev.lock\fR\fR
 .ad
@@ -220,7 +196,6 @@ update lock file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/.devfsadm_daemon.lock\fR\fR
 .ad
@@ -231,7 +206,6 @@ daemon lock file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/device_policy\fR\fR
 .ad
@@ -242,7 +216,6 @@ device policy file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/extra_privs\fR\fR
 .ad
diff --git a/usr/src/man/man1m/device_remap.1m b/usr/src/man/man1m/device_remap.1m
index a06aee5077..62afa3e316 100644
--- a/usr/src/man/man1m/device_remap.1m
+++ b/usr/src/man/man1m/device_remap.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH device_remap 1M "24 Dec 2008" "SunOS 5.11" "System Administration Commands"
+.TH DEVICE_REMAP 1M "Dec 24, 2008"
 .SH NAME
 device_remap \- administer the Solaris I/O remapping feature
 .SH SYNOPSIS
@@ -26,7 +26,6 @@ to match the hardware.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -37,7 +36,6 @@ Displays the \fB/etc/path_to_inst\fR and \fB/dev\fR symlink changes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIdir\fR\fR
 .ad
@@ -143,13 +141,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUnstable
+Interface Stability	Unstable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/devinfo.1m b/usr/src/man/man1m/devinfo.1m
index 8acfe4df2d..7a45d8c910 100644
--- a/usr/src/man/man1m/devinfo.1m
+++ b/usr/src/man/man1m/devinfo.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH devinfo 1M "8 May 1997" "SunOS 5.11" "System Administration Commands"
+.TH DEVINFO 1M "May 8, 1997"
 .SH NAME
 devinfo \- print device specific information
 .SH SYNOPSIS
@@ -25,12 +25,10 @@ disk devices on standard out. The command can only be used by the superuser.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 6n
-.rt  
 Prints the following device information:
 .RS +4
 .TP
@@ -72,12 +70,10 @@ Number of device partitions with a block size greater than zero
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 6n
-.rt  
 Prints the following device partition information:
 .RS +4
 .TP
@@ -125,35 +121,29 @@ information. If the device cannot be opened, an error message is reported.
 .SH OPERANDS
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdevice\fR\fR
 .ad
 .RS 10n
-.rt  
 Device name.
 .RE
 
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful operation.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Operation failed.
 .RE
 
diff --git a/usr/src/man/man1m/devlinks.1m b/usr/src/man/man1m/devlinks.1m
index 0a424349c3..992857dc3f 100644
--- a/usr/src/man/man1m/devlinks.1m
+++ b/usr/src/man/man1m/devlinks.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH devlinks 1M "15 Jul 2002" "SunOS 5.11" "System Administration Commands"
+.TH DEVLINKS 1M "Jul 15, 2002"
 .SH NAME
 devlinks \- adds /dev entries for miscellaneous devices and pseudo-devices
 .SH SYNOPSIS
@@ -39,12 +39,10 @@ TAB characters.
 The fields are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdevfs-spec\fR\fR
 .ad
 .RS 18n
-.rt  
 Specification of devinfo nodes that will have links created for them. This
 specification consists of one or more keyword-value pairs, where the keyword is
 separated from the value by an equal-sign (`\fB=\fR'), and keyword-value pairs
@@ -53,36 +51,30 @@ are separated from one another by semicolons.
 The possible keywords are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fItype\fR\fR
 .ad
 .RS 12n
-.rt  
 The devinfo device type. Possible values are specified in
 \fBddi_create_minor_node\fR(9F)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIname\fR\fR
 .ad
 .RS 12n
-.rt  
 The name of the node. This is the portion of the \fB/devices\fR tree entry name
 that occurs before the first `\fB@\fR' or `\fB:\fR' character.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIaddr\fR[\fIn\fR]\fR
 .ad
 .RS 12n
-.rt  
 The address portion of a node name. This is the portion of a node name that
 occurs between the `\fB@\fR' and the `\fB:\fR' characters. It is possible that
 a node may have a name without an address part, which is the case for many of
@@ -94,12 +86,10 @@ on. \fIaddr0\fR is the same as \fIaddr\fR and matches the whole field.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIminor\fR[\fIn\fR]\fR
 .ad
 .RS 12n
-.rt  
 The minor portion of a node name \(mi the portion of the name after the
 `\fB:\fR'. As with \fIaddr\fR above, a number after the \fIminor\fR keyword
 specifies a subfield to match.
@@ -111,12 +101,10 @@ present.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIname\fR\fR
 .ad
 .RS 18n
-.rt  
 Specification of the \fB/dev\fR links that correspond to the devinfo nodes.
 This field allows \fBdevlinks\fR to determine matching \fB/dev\fR names for the
 \fB/devices\fR nodes it has found. The specification of this field uses
@@ -132,24 +120,20 @@ point to the same directory, \fBname\fR and \fBaddress\fR under the
 The possible escape-sequences are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\eD\fR\fR
 .ad
 .RS 8n
-.rt  
 Substitute the \fBdevice-name\fR (name) portion of the corresponding devinfo
 node-name.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\eA\fR\fIn\fR\fR
 .ad
 .RS 8n
-.rt  
 Substitute the \fIn\fRth component of the \fBaddress\fR component of the
 corresponding devinfo node name. Sub-components are separated by commas, and
 sub-component \fB0\fR is the whole \fBaddress\fR component.
@@ -157,12 +141,10 @@ sub-component \fB0\fR is the whole \fBaddress\fR component.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\eM\fR\fIn\fR\fR
 .ad
 .RS 8n
-.rt  
 Substitute the \fIn\fRth sub-component of the \fBminor\fR component of the
 corresponding devinfo node name. Sub-components are separated by commas, and
 sub-component \fB0\fR is the whole \fBminor\fR component.
@@ -170,12 +152,10 @@ sub-component \fB0\fR is the whole \fBminor\fR component.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\eN\fR\fIn\fR\fR
 .ad
 .RS 8n
-.rt  
 Substitute the value of a 'counter' starting at \fIn\fR. There can be only one
 counter for each dev-spec, and counter-values will be selected so they are as
 low as possible while not colliding with already-existing link names.
@@ -191,12 +171,10 @@ the already-existing \fB/dev\fR-name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIextra-dev-link\fR\fR
 .ad
 .RS 18n
-.rt  
 Optional specification of an extra \fB/dev\fR link that points to the initial
 \fB/dev\fR link (specified in field 2). This field may contain a \fBcounter\fR
 escape-sequence (as described for the \fIdev-spec\fR field) but may not contain
@@ -210,24 +188,20 @@ particular \fB/dev\fR name.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 17n
-.rt  
 Debugging mode \(mi print out all \fBdevinfo\fR nodes found, and indicate what
 links would be created, but do not do anything.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrootdir\fR\fR
 .ad
 .RS 17n
-.rt  
 Use \fIrootdir\fR as the root of the \fB/dev\fR and \fB/devices\fR directories
 under which the device nodes and links are created. Changing the root directory
 does not change the location of the \fB/etc/devlink.tab\fR default table, nor
@@ -236,12 +210,10 @@ is the root directory applied to the filename supplied to the \fB-t\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fItable-file\fR\fR
 .ad
 .RS 17n
-.rt  
 Set the table file used by \fBdevlinks\fR to specify the links that must be
 created. If this option is not given, \fB/etc/devlink.tab\fR is used. This
 option gives a way to instruct \fBdevlinks\fR just to perform a particular
@@ -297,34 +269,28 @@ under \fB/dev/framebuffer\fR. This entry will use a counter to end the name.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev\fR\fR
 .ad
 .RS 20n
-.rt  
 entries for the miscellaneous devices for general use
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/devices\fR\fR
 .ad
 .RS 20n
-.rt  
 device nodes
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/devlink.tab\fR\fR
 .ad
 .RS 20n
-.rt  
 the default rule-file
 .RE
 
diff --git a/usr/src/man/man1m/devnm.1m b/usr/src/man/man1m/devnm.1m
index acface13cb..666043bb92 100644
--- a/usr/src/man/man1m/devnm.1m
+++ b/usr/src/man/man1m/devnm.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH devnm 1M "14 Sep 1992" "SunOS 5.11" "System Administration Commands"
+.TH DEVNM 1M "Sep 14, 1992"
 .SH NAME
 devnm \- device name
 .SH SYNOPSIS
@@ -49,24 +49,20 @@ produces:
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/dsk/*\fR\fR
 .ad
 .RS 15n
-.rt  
- 
+
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mnttab\fR\fR
 .ad
 .RS 15n
-.rt  
- 
+
 .RE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/devprop.1m b/usr/src/man/man1m/devprop.1m
index 9e5634c72b..3668caa8bf 100644
--- a/usr/src/man/man1m/devprop.1m
+++ b/usr/src/man/man1m/devprop.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH devprop 1M "26 Sep 2007" "SunOS 5.11" "System Administration Commands"
+.TH DEVPROP 1M "Sep 26, 2007"
 .SH NAME
 devprop \- display device properties
 .SH SYNOPSIS
@@ -31,7 +31,6 @@ The output formats, while Volatile, are patterned after those of
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR\fR
 .ad
@@ -44,7 +43,6 @@ another.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
@@ -55,7 +53,6 @@ The properties to be output are integers (\fBDI_PROP_TYPE_INT\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
@@ -66,7 +63,6 @@ The properties to be output are 64-bit integers (\fBDI_PROP_TYPE_INT64\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
@@ -78,7 +74,6 @@ default).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fIdevice-path\fR\fR
 .ad
@@ -91,7 +86,6 @@ default path is that of the root node (equivalent to specifying \fB-n\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
@@ -103,7 +97,6 @@ by double quotation marks (\fB"\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -119,7 +112,6 @@ value.
 The following operand is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIproperty\fR...\fR
 .ad
@@ -131,7 +123,6 @@ Name of the property to be displayed.
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -142,7 +133,6 @@ No error occurred.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnon-zero\fR\fR
 .ad
@@ -159,13 +149,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/devreserv.1m b/usr/src/man/man1m/devreserv.1m
index fc749972f7..44c73d0804 100644
--- a/usr/src/man/man1m/devreserv.1m
+++ b/usr/src/man/man1m/devreserv.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH devreserv 1M "5 Jul 1990" "SunOS 5.11" "System Administration Commands"
+.TH DEVRESERV 1M "Jul 5, 1990"
 .SH NAME
 devreserv \- reserve devices for exclusive use
 .SH SYNOPSIS
@@ -34,24 +34,20 @@ devices that are currently reserved to that key.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdevice-list\fR\fR
 .ad
 .RS 15n
-.rt  
 Defines a list of devices that \fBdevreserv\fR will search to find an available
 device. The list must be formatted as a single argument to the shell.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIkey\fR\fR
 .ad
 .RS 15n
-.rt  
 Designates a unique key on which the device will be reserved. The key must be a
 positive integer.
 .RE
@@ -113,70 +109,58 @@ $ devreserv $key
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Command syntax was incorrect, an invalid was option used, or an internal error
 occurred.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Device table or device reservation table could not be opened for reading.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 5n
-.rt  
 Device reservation request could not be fulfilled.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/device.tab\fR\fR
 .ad
 .RS 19n
-.rt  
- 
+
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/devlkfile\fR\fR
 .ad
 .RS 19n
-.rt  
- 
+
 .RE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/df.1m b/usr/src/man/man1m/df.1m
index 41f2a3ad6f..447c9b761f 100644
--- a/usr/src/man/man1m/df.1m
+++ b/usr/src/man/man1m/df.1m
@@ -1,5 +1,5 @@
 '\" te
-.\" Copyright (c) 2003, Sun Microsystems, Inc. All Rights Reserved. 
+.\" Copyright (c) 2003, Sun Microsystems, Inc. All Rights Reserved.
 .\" Copyright 1989 AT&T
 .\" Portions Copyright (c) 1992, X/Open Company Limited All Rights Reserved Portions
 .\" Sun Microsystems, Inc. gratefully acknowledges The Open Group for permission to reproduce portions of its copyrighted documentation. Original documentation from The Open Group can be obtained online at  http://www.opengroup.org/bookstore/.
@@ -10,21 +10,21 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH df 1M "26 Jul 2009" "SunOS 5.11" "System Administration Commands"
+.TH DF 1M "Jul 26, 2009"
 .SH NAME
 df \- displays number of free disk blocks and free files
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/bin/df\fR [\fB-F\fR \fIFSType\fR] [\fB-abeghklntVvZ\fR] 
-     [\fB-o\fR \fIFSType-specific_options\fR] 
+\fB/usr/bin/df\fR [\fB-F\fR \fIFSType\fR] [\fB-abeghklntVvZ\fR]
+     [\fB-o\fR \fIFSType-specific_options\fR]
      [\fIblock_device\fR | \fIdirectory\fR | \fIfile\fR | \fIresource\fR ...]
 .fi
 
 .LP
 .nf
-\fB/usr/xpg4/bin/df\fR [\fB-F\fR \fIFSType\fR] [\fB-abeghklnPtVZ\fR] 
-     [\fB-o\fR \fIFSType-specific_options\fR] 
+\fB/usr/xpg4/bin/df\fR [\fB-F\fR \fIFSType\fR] [\fB-abeghklnPtVZ\fR]
+     [\fB-o\fR \fIFSType-specific_options\fR]
      [\fIblock_device\fR | \fIdirectory\fR | \fIfile\fR | \fIresource\fR ...]
 .fi
 
@@ -53,7 +53,6 @@ The following options are supported for both \fB/usr/bin/df\fR and
 \fB/usr/xpg4/bin/df\fR:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -65,7 +64,6 @@ Reports on all file systems including ones whose entries in \fB/etc/mnttab\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR\fR
 .ad
@@ -76,7 +74,6 @@ Prints the total number of kilobytes free.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
@@ -87,7 +84,6 @@ Prints only the number of files free.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fIFSType\fR\fR
 .ad
@@ -102,7 +98,6 @@ table, or by consulting \fB/etc/default/fs\fR. See \fBdefault_fs\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR\fR
 .ad
@@ -116,7 +111,6 @@ options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -139,7 +133,6 @@ and can not be used together with \fB-o\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR\fR
 .ad
@@ -156,7 +149,6 @@ overrides the \fB-b\fR, \fB-e\fR, \fB-n\fR, and \fB-t\fR options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
@@ -168,7 +160,6 @@ systems. It can not be used with the \fB-o\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -181,7 +172,6 @@ systems. It can not be used with the \fB-o\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIFSType-specific_options\fR\fR
 .ad
@@ -194,7 +184,6 @@ command for details.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
@@ -206,7 +195,6 @@ and \fB-n\fR options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
@@ -221,7 +209,6 @@ be used to verify and validate the command line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Z\fR\fR
 .ad
@@ -238,7 +225,6 @@ zone.
 The following option is supported for \fB/usr/bin/df\fR only:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -294,7 +280,6 @@ the percentage of blocks in use by files
 The following option is supported for \fB/usr/xpg4/bin/df\fR only:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR\fR
 .ad
@@ -311,7 +296,6 @@ The \fBdf\fR utility interprets operands according to the following precedence:
 supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIblock_device\fR\fR
 .ad
@@ -322,7 +306,6 @@ Represents a block special device (for example, \fB/dev/dsk/c1d0s7\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdirectory\fR\fR
 .ad
@@ -334,7 +317,6 @@ contains \fIdirectory\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfile\fR\fR
 .ad
@@ -346,7 +328,6 @@ Represents a valid file name. \fBdf\fR reports on the file system that contains
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIresource\fR\fR
 .ad
@@ -444,7 +425,6 @@ example%\fB/usr/bin/df -F ufs -o i\fR
 .SH ENVIRONMENT VARIABLES
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSYSV3\fR\fR
 .ad
@@ -468,7 +448,6 @@ that affect the execution of \fBdf\fR: \fBLANG\fR, \fBLC_ALL\fR,
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -479,7 +458,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
@@ -491,7 +469,6 @@ An error occurred.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/dsk/*\fR\fR
 .ad
@@ -502,7 +479,6 @@ Disk devices
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/fs\fR\fR
 .ad
@@ -515,7 +491,6 @@ is the default partition for a command if no FSType is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mnttab\fR\fR
 .ad
@@ -526,7 +501,6 @@ Mount table
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vfstab\fR\fR
 .ad
@@ -544,13 +518,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStandard
+Interface Stability	Standard
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/df_ufs.1m b/usr/src/man/man1m/df_ufs.1m
index 5f0ef56202..f797407b49 100644
--- a/usr/src/man/man1m/df_ufs.1m
+++ b/usr/src/man/man1m/df_ufs.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH df_ufs 1M "25 Feb 2005" "SunOS 5.11" "System Administration Commands"
+.TH DF_UFS 1M "Feb 25, 2005"
 .SH NAME
 df_ufs \- report free disk space on ufs file systems
 .SH SYNOPSIS
@@ -33,33 +33,27 @@ displays information for all mounted ufs file systems.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIgeneric_options\fR\fR
 .ad
 .RS 19n
-.rt  
 Options supported by the generic \fBdf\fR command. See \fBdf\fR(1M) for a
 description of these options.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 19n
-.rt  
 Specify \fBufs\fR file system specific options. The available option is:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBi\fR\fR
 .ad
 .RS 5n
-.rt  
 Report the number of used and free inodes. This option can not be used with
 \fIgeneric_options\fR.
 .RE
@@ -69,12 +63,10 @@ Report the number of used and free inodes. This option can not be used with
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mnttab\fR\fR
 .ad
 .RS 15n
-.rt  
 list of file systems currently mounted
 .RE
 
diff --git a/usr/src/man/man1m/dfmounts.1m b/usr/src/man/man1m/dfmounts.1m
index ec547248e8..11051a4ed0 100644
--- a/usr/src/man/man1m/dfmounts.1m
+++ b/usr/src/man/man1m/dfmounts.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH dfmounts 1M "24 May 2005" "SunOS 5.11" "System Administration Commands"
+.TH DFMOUNTS 1M "May 24, 2005"
 .SH NAME
 dfmounts \- display mounted resource information
 .SH SYNOPSIS
 .LP
 .nf
-\fBdfmounts\fR [\fB-F\fR \fIFSType\fR] [\fB-h\fR] [\fB-o\fR \fIspecific_options\fR] 
+\fBdfmounts\fR [\fB-F\fR \fIFSType\fR] [\fB-h\fR] [\fB-o\fR \fIspecific_options\fR]
      [\fIrestriction\fR]...
 .fi
 
@@ -46,45 +46,37 @@ whitespace-separated fields. For each resource, the fields are:
 where:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIresource\fR\fR
 .ad
 .RS 12n
-.rt  
 Specifies the resource name that must be given to the \fBmount\fR(1M) command.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIserver\fR\fR
 .ad
 .RS 12n
-.rt  
 Specifies the system from which the resource was mounted.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpathname\fR\fR
 .ad
 .RS 12n
-.rt  
 Specifies the pathname that must be given to the \fBshare\fR(1M) command.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIclients\fR\fR
 .ad
 .RS 12n
-.rt  
 Is a comma-separated list of systems that have mounted the resource. Clients
 are listed in the form \fIdomain.\fR, \fIdomain.system\fR, or \fIsystem\fR,
 depending on the file system type.
@@ -101,35 +93,29 @@ Fields with whitespace are enclosed in quotation marks (\fB"\|"\fR).
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fIFSType\fR\fR
 .ad
 .RS 23n
-.rt  
 Specify filesystem type. Defaults to the first entry in \fB/etc/dfs/fstypes\fR.
 \fBNote\fR: currently the only valid \fIFSType\fR is \fBnfs\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 23n
-.rt  
 Suppress header line in output.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIspecific_options\fR\fR
 .ad
 .RS 23n
-.rt  
 Specify options specific to the filesystem provided by the \fB-F\fR option.
 \fBNote\fR: currently no options are supported.
 .RE
@@ -137,12 +123,10 @@ Specify options specific to the filesystem provided by the \fB-F\fR option.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dfs/fstypes\fR\fR
 .ad
 .RS 20n
-.rt  
 file system types
 .RE
 
diff --git a/usr/src/man/man1m/dfmounts_nfs.1m b/usr/src/man/man1m/dfmounts_nfs.1m
index 56338e4b5c..fa13968341 100644
--- a/usr/src/man/man1m/dfmounts_nfs.1m
+++ b/usr/src/man/man1m/dfmounts_nfs.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH dfmounts_nfs 1M "6 Nov 2000" "SunOS 5.11" "System Administration Commands"
+.TH DFMOUNTS_NFS 1M "Nov 6, 2000"
 .SH NAME
 dfmounts_nfs \- display mounted NFS resource information
 .SH SYNOPSIS
@@ -40,79 +40,65 @@ whitespace-separated fields.  For each resource, the fields are:
 where
 .sp
 .ne 2
-.mk
 .na
 \fB\fIresource\fR\fR
 .ad
 .RS 12n
-.rt  
 Does not apply to  \fBNFS.\fR Printed as a hyphen (-).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIserver\fR\fR
 .ad
 .RS 12n
-.rt  
 Specifies the system from which the resource was mounted.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpathname\fR\fR
 .ad
 .RS 12n
-.rt  
 Specifies the pathname that must be given to the \fBshare\fR(1M) command.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIclients\fR\fR
 .ad
 .RS 12n
-.rt  
 Is a comma-separated list of systems that have mounted the resource.
 .RE
 
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fBnfs\fR\fR
 .ad
 .RS 10n
-.rt  
 Specifies the \fBnfs\fR-FSType.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 10n
-.rt  
 Suppress header line in output.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIserver\fR\fR
 .ad
 .RS 10n
-.rt  
 Displays information about the resources mounted from each server, where
 \fIserver\fR can be any system on the network.  If no server is specified, the
 \fIserver\fR is assumed to be the local system.
@@ -121,12 +107,10 @@ Displays information about the resources mounted from each server, where
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dfs/fstypes\fR\fR
 .ad
 .RS 20n
-.rt  
 
 .RE
 
diff --git a/usr/src/man/man1m/dfshares.1m b/usr/src/man/man1m/dfshares.1m
index 1738097152..fa724bc120 100644
--- a/usr/src/man/man1m/dfshares.1m
+++ b/usr/src/man/man1m/dfshares.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH dfshares 1M "6 Nov 2000" "SunOS 5.11" "System Administration Commands"
+.TH DFSHARES 1M "Nov 6, 2000"
 .SH NAME
 dfshares \- list available resources from remote or local systems
 .SH SYNOPSIS
@@ -40,34 +40,28 @@ whitespace-separated fields.  For each resource, the fields are:
 where
 .sp
 .ne 2
-.mk
 .na
 \fB\fIresource\fR\fR
 .ad
 .RS 13n
-.rt  
 Specifies the resource name that must be given to the \fBmount\fR(1M) command.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIserver\fR\fR
 .ad
 .RS 13n
-.rt  
 Specifies the name of the system that is making the resource available.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIaccess\fR\fR
 .ad
 .RS 13n
-.rt  
 Specifies the access permissions granted to the client systems, either \fBro\fR
 (for read-only) or \fBrw\fR (for read/write). If \fBdfshares\fR cannot
 determine access permissions, a hyphen  (\fB\(mi\fR) is displayed.
@@ -75,12 +69,10 @@ determine access permissions, a hyphen  (\fB\(mi\fR) is displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fItransport\fR\fR
 .ad
 .RS 13n
-.rt  
 Specifies the transport provider over which the resource is shared.
 .RE
 
@@ -92,47 +84,39 @@ may be omitted.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fIFSType\fR\fR
 .ad
 .RS 23n
-.rt  
 Specify filesystem type.  Defaults to the first entry in
 \fB/etc/dfs/fstypes\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 23n
-.rt  
 Suppress header line in output.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIspecific_options\fR\fR
 .ad
 .RS 23n
-.rt  
 Specify options specific to the filesystem provided by the \fB-F\fR option.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dfs/fstypes\fR\fR
 .ad
 .RS 20n
-.rt  
 
 .RE
 
diff --git a/usr/src/man/man1m/dfshares_nfs.1m b/usr/src/man/man1m/dfshares_nfs.1m
index 5e2c12e180..f9cacaf0c3 100644
--- a/usr/src/man/man1m/dfshares_nfs.1m
+++ b/usr/src/man/man1m/dfshares_nfs.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH dfshares_nfs 1M "6 Nov 2000" "SunOS 5.11" "System Administration Commands"
+.TH DFSHARES_NFS 1M "Nov 6, 2000"
 .SH NAME
 dfshares_nfs \- list available NFS resources from remote systems
 .SH SYNOPSIS
@@ -48,34 +48,28 @@ whitespace-separated fields.  For each resource, the fields are:
 where
 .sp
 .ne 2
-.mk
 .na
 \fB\fIresource\fR\fR
 .ad
 .RS 13n
-.rt  
 Specifies the resource name that must be given to the \fBmount\fR(1M) command.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIserver\fR\fR
 .ad
 .RS 13n
-.rt  
 Specifies the system that is making the resource available.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIaccess\fR\fR
 .ad
 .RS 13n
-.rt  
 Specifies the access permissions granted to the client systems;  however,
 \fBdfshares\fR cannot determine this information for an  \fBNFS\fR resource and
 populates the field with a hyphen (-).
@@ -83,12 +77,10 @@ populates the field with a hyphen (-).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fItransport\fR\fR
 .ad
 .RS 13n
-.rt  
 Specifies the transport provider over which the \fIresource\fR  is shared;
 however, \fBdfshares\fR cannot determine this information for an  \fBNFS\fR
 resource and populates the field with a hyphen (-).
@@ -102,35 +94,29 @@ may be omitted.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fBnfs\fR\fR
 .ad
 .RS 10n
-.rt  
 Specify the  \fBNFS\fR file system type
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 10n
-.rt  
 Suppress header line in output.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dfs/fstypes\fR\fR
 .ad
 .RS 20n
-.rt  
 
 .RE
 
diff --git a/usr/src/man/man1m/dhcpagent.1m b/usr/src/man/man1m/dhcpagent.1m
index 1041955813..984f941db2 100644
--- a/usr/src/man/man1m/dhcpagent.1m
+++ b/usr/src/man/man1m/dhcpagent.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH dhcpagent 1M "21 Sep 2009" "SunOS 5.11" "System Administration Commands"
+.TH DHCPAGENT 1M "Sep 21, 2009"
 .SH NAME
 dhcpagent \- Dynamic Host Configuration Protocol (DHCP) client daemon
 .SH SYNOPSIS
@@ -142,7 +142,6 @@ The \fBdhcpagent\fR daemon writes information and error messages in five
 categories:
 .sp
 .ne 2
-.mk
 .na
 \fBcritical\fR
 .ad
@@ -153,7 +152,6 @@ Critical messages indicate severe conditions that prevent proper operation.
 
 .sp
 .ne 2
-.mk
 .na
 \fBerrors\fR
 .ad
@@ -166,7 +164,6 @@ lead to degraded functionality.
 
 .sp
 .ne 2
-.mk
 .na
 \fBwarnings\fR
 .ad
@@ -179,7 +176,6 @@ be provided.
 
 .sp
 .ne 2
-.mk
 .na
 \fBinformational\fR
 .ad
@@ -193,7 +189,6 @@ of information, such as the IP address obtained, are always provided.
 
 .sp
 .ne 2
-.mk
 .na
 \fBdebug\fR
 .ad
@@ -219,7 +214,6 @@ If an executable (binary or script) is placed at \fB/etc/dhcp/eventhook\fR, the
 following events occur:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBBOUND\fR and \fBBOUND6\fR\fR
 .ad
@@ -235,7 +229,6 @@ leases.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEXTEND\fR and \fBEXTEND6\fR\fR
 .ad
@@ -257,7 +250,6 @@ Those to be removed will be marked with the \fBIFF_DEPRECATED\fR flag.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEXPIRE\fR and \fBEXPIRE6\fR\fR
 .ad
@@ -271,7 +263,6 @@ addresses are removed from the interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDROP\fR and \fBDROP6\fR\fR
 .ad
@@ -286,7 +277,6 @@ might not be present.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBINFORM\fR and \fBINFORM6\fR\fR
 .ad
@@ -303,7 +293,6 @@ lease from the server, and instead obtains only configuration parameters.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLOSS6\fR\fR
 .ad
@@ -320,7 +309,6 @@ DHCPv6. If all leases have expired, then the EXPIRE6 event occurs instead.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRELEASE\fR and \fBRELEASE6\fR\fR
 .ad
@@ -365,7 +353,6 @@ See EXAMPLES for an example event program.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -406,7 +393,6 @@ http://www.ietf.org
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIn\fR\fR
 .ad
@@ -418,7 +404,6 @@ and 2; the latter is more verbose.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -430,7 +415,6 @@ messages are sent to standard error instead of to \fBsyslog\fR(3C).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -489,7 +473,6 @@ Note the redirection of stdout and stderr to a file.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dhcp/\fIif\fR.dhc\fR\fR
 .ad
@@ -507,7 +490,6 @@ using REQUEST (for DHCPv4) or Confirm (DHCPv6).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dhcp/duid\fR\fR
 .ad
@@ -524,7 +506,6 @@ undocumented, and applications should not read from or write to them.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/dhcpagent\fR\fR
 .ad
@@ -543,7 +524,6 @@ IPv6 parameter request list, use \fB\&.v6.PARAM_REQUEST_LIST\fR. To set the
 The parameters include:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBVERIFIED_LEASE_ONLY\fR\fR
 .ad
@@ -565,7 +545,6 @@ allow the system to recover quickly from moves.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBOFFER_WAIT\fR\fR
 .ad
@@ -578,7 +557,6 @@ for valid Advertisements after sending a Solicit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCLIENT_ID\fR\fR
 .ad
@@ -602,7 +580,6 @@ first form, the format of \fIdata\fR... depends on the decimal value. The
 following formats are defined for this first form:
 .sp
 .ne 2
-.mk
 .na
 \fB1,\fIhwtype\fR,\fItime\fR,\fIlla\fR\fR
 .ad
@@ -618,7 +595,6 @@ used, the \fIhwtype\fR value can be omitted. For example: \fB1,,,hme0\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB2,\fIenterprise\fR,\fIhex\fR...\fR
 .ad
@@ -631,7 +607,6 @@ Type 2, DUID-EN. The \fIenterprise\fR value is an integer in the range
 
 .sp
 .ne 2
-.mk
 .na
 \fB3,\fIhwtype\fR,\fIlla\fR\fR
 .ad
@@ -643,7 +618,6 @@ stamp is not used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB*,\fIhex\fR\fR
 .ad
@@ -660,7 +634,6 @@ format. Thus, "\fBSun\fR" and \fB0x53756E\fR are equivalent.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPARAM_REQUEST_LIST\fR\fR
 .ad
@@ -674,7 +647,6 @@ Option names for IPv6 are resolved by means of \fB/etc/dhcp/inittab6\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPARAM_IGNORE_LIST\fR\fR
 .ad
@@ -690,7 +662,6 @@ default router.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBREQUEST_HOSTNAME\fR\fR
 .ad
@@ -718,7 +689,6 @@ This option works with DHCPv4 only.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dhcp/eventhook\fR\fR
 .ad
@@ -735,13 +705,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/dhcpconfig.1m b/usr/src/man/man1m/dhcpconfig.1m
index 2ba813fa8d..ccb4eb6bed 100644
--- a/usr/src/man/man1m/dhcpconfig.1m
+++ b/usr/src/man/man1m/dhcpconfig.1m
@@ -3,15 +3,15 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH dhcpconfig 1M "16 Jun 2004" "SunOS 5.11" "System Administration Commands"
+.TH DHCPCONFIG 1M "Jun 16, 2004"
 .SH NAME
 dhcpconfig \- DHCP service configuration utility
 .SH SYNOPSIS
 .LP
 .nf
-\fBdhcpconfig\fR \fB-D\fR \fB-r\fR \fIresource\fR \fB-p\fR \fIpath\fR [\fB-u\fR \fIuninterpreted\fR] 
-     [\fB-l\fR \fIlease_length\fR] [\fB-n\fR ] [\fB-d\fR \fIDNS_domain\fR] 
-     [\fB-a\fR \fIDNS_server_addresses\fR] [\fB-h\fR \fIhosts_resource\fR] 
+\fBdhcpconfig\fR \fB-D\fR \fB-r\fR \fIresource\fR \fB-p\fR \fIpath\fR [\fB-u\fR \fIuninterpreted\fR]
+     [\fB-l\fR \fIlease_length\fR] [\fB-n\fR ] [\fB-d\fR \fIDNS_domain\fR]
+     [\fB-a\fR \fIDNS_server_addresses\fR] [\fB-h\fR \fIhosts_resource\fR]
      [\fB-y\fR \fIhosts_domain\fR]
 .fi
 
@@ -27,20 +27,20 @@ dhcpconfig \- DHCP service configuration utility
 
 .LP
 .nf
-\fBdhcpconfig\fR \fB-N\fR \fInetwork_address\fR [\fB-m\fR \fIsubnet_mask\fR] [\fB-b\fR ] 
-     [\fB-t\fR \fIrouter_addresses\fR] [\fB-y\fR \fINIS-domain\fR] 
+\fBdhcpconfig\fR \fB-N\fR \fInetwork_address\fR [\fB-m\fR \fIsubnet_mask\fR] [\fB-b\fR ]
+     [\fB-t\fR \fIrouter_addresses\fR] [\fB-y\fR \fINIS-domain\fR]
      [\fB-a\fR \fINIS_server_addresses\fR] [\fB-g\fR]
 .fi
 
 .LP
 .nf
-\fBdhcpconfig\fR \fB-C\fR \fB-r\fR \fIresource\fR \fB-p\fR \fIpath\fR [\fB-f\fR] [\fB-k\fR] 
+\fBdhcpconfig\fR \fB-C\fR \fB-r\fR \fIresource\fR \fB-p\fR \fIpath\fR [\fB-f\fR] [\fB-k\fR]
      [\fB-u\fR \fIuninterpreted\fR]
 .fi
 
 .LP
 .nf
-\fBdhcpconfig\fR \fB-X\fR \fIfilename\fR [\fB-m\fR \fImacro_list\fR] [\fB-o\fR \fIoption_list\fR] 
+\fBdhcpconfig\fR \fB-X\fR \fIfilename\fR [\fB-m\fR \fImacro_list\fR] [\fB-o\fR \fIoption_list\fR]
      [\fB-a\fR \fInetwork_addresses\fR] [\fB-f\fR] [\fB-x\fR] [\fB-g\fR]
 .fi
 
@@ -92,18 +92,17 @@ to the \fBdhcptab\fR configuration table. The following table lists information
 
 .sp
 .TS
-tab() box;
-lw(1.38i) |lw(2.06i) |lw(2.06i) 
-lw(1.38i) |lw(2.06i) |lw(2.06i) 
-.
-\fIInformation\fR\fISource\fR\fIWhere Used\fR
+box;
+l | l | l
+l | l | l .
+\fIInformation\fR	\fISource\fR	\fIWhere Used\fR
 _
-TimezoneSystem date, timezone settings\fBLocale\fR macro
-DNS parameters\fBnsswitch.conf\fR, \fB/etc/resolv.conf\fRServer macro
-NIS parametersSystem domainname, \fBnsswitch.conf\fR, NISNetwork macros
-SubnetmaskT{
+Timezone	System date, timezone settings	\fBLocale\fR macro
+DNS parameters	\fBnsswitch.conf\fR, \fB/etc/resolv.conf\fR	Server macro
+NIS parameters	System domainname, \fBnsswitch.conf\fR, NIS	Network macros
+Subnetmask	T{
 Network interface, \fBnetmasks\fR table in nameservice
-T}Network macros
+T}	Network macros
 .TE
 
 .sp
@@ -118,12 +117,10 @@ supply override the values obtained from the system files.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR\fR
 .ad
 .RS 23n
-.rt  
 Convert to using a new data store, recreating the DHCP data tables in a format
 appropriate to the new data store, and setting up the DHCP server to use the
 new data store.
@@ -131,12 +128,10 @@ new data store.
 The following sub-options are required:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIpath_to_data\fR\fR
 .ad
 .RS 20n
-.rt  
 The paths for \fBSUNWfiles\fR and \fBSUNWbinfiles\fR must be absolute
 \fBUNIX\fR pathnames. The path for \fBSUNWnisplus\fR must be a fully specified
 \fBNIS+\fR directory (including the tailing period.) See \fBdhcp_modules\fR(5).
@@ -144,12 +139,10 @@ The paths for \fBSUNWfiles\fR and \fBSUNWbinfiles\fR must be absolute
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIdata_resource\fR\fR
 .ad
 .RS 20n
-.rt  
 New data store resource. One of the following must be specified:
 \fBSUNWfiles\fR, \fBSUNWbinfiles\fR, or \fBSUNWnisplus\fR. See
 \fBdhcp_modules\fR(5).
@@ -158,24 +151,20 @@ New data store resource. One of the following must be specified:
 The following sub-options are optional:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 20n
-.rt  
 Do not prompt for confirmation. If \fB-f\fR is not used, a warning and
 confirmation prompt are issued before the conversion starts.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR\fR
 .ad
 .RS 20n
-.rt  
 Keep the old DHCP data tables after successful conversion. If any problem
 occurs during conversion, tables are not deleted even if \fB-k\fR sub-option is
 not specified.
@@ -183,12 +172,10 @@ not specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIuninterpreted\fR\fR
 .ad
 .RS 20n
-.rt  
 Data which is ignored by \fBdhcpconfig\fR, but passed on to the datastore for
 interpretation. The private layer provides for module-specific configuration
 information through the use of the \fBRESOURCE_CONFIG \fR keyword.
@@ -202,23 +189,19 @@ Uninterpreted data is stored within \fBRESOURCE_CONFIG\fR keyword of
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
 .RS 23n
-.rt  
 Configure the \fBDHCP\fR service.
 .sp
 The following sub-options are required:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIdata_resource\fR\fR
 .ad
 .RS 20n
-.rt  
 One of the following must be specified: \fBSUNWfiles\fR, \fBSUNWbinfiles\fR, or
 \fBSUNWnisplus\fR. Other data stores may be available.See
 \fBdhcp_modules\fR(5).
@@ -226,12 +209,10 @@ One of the following must be specified: \fBSUNWfiles\fR, \fBSUNWbinfiles\fR, or
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIpath\fR\fR
 .ad
 .RS 20n
-.rt  
 The paths for \fBSUNWfiles\fR and \fBSUNWbinfiles\fR must be absolute
 \fBUNIX\fR pathnames. The path for \fBSUNWnisplus\fR must be a fully specified
 \fBNIS+\fR directory (including the tailing period.) . See
@@ -241,81 +222,67 @@ The paths for \fBSUNWfiles\fR and \fBSUNWbinfiles\fR must be absolute
 The following sub-options are optional:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIDNS_servers\fR\fR
 .ad
 .RS 21n
-.rt  
 IP addresses of DNS servers, separated with commas.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIDNS_domain\fR\fR
 .ad
 .RS 21n
-.rt  
 DNS domain name.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIhosts_resource\fR\fR
 .ad
 .RS 21n
-.rt  
 Resource in which to place hosts data. Usually, the name service in use on the
 server. Valid values are \fBnisplus\fR, \fBfiles\fR, or \fBdns\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIseconds\fR\fR
 .ad
 .RS 21n
-.rt  
 Lease length used for addresses not having a specified lease length, in
 seconds.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 21n
-.rt  
 Non-negotiable leases
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-y\fR \fIhosts_domain\fR\fR
 .ad
 .RS 21n
-.rt  
 DNS or NIS+ domain name to be used for hosts data. Valid only if \fBdns\fR or
 \fBnisplus\fR is specified for \fB-h\fR sub-option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIuninterpreted\fR\fR
 .ad
 .RS 21n
-.rt  
 Data which is ignored by \fBdhcpconfig\fR, but passed on to the datastore for
 interpretation. The private layer provides for module-specific configuration
 information through the use of the \fBRESOURCE_CONFIG \fR keyword.
@@ -329,12 +296,10 @@ Uninterpreted data is stored within \fBRESOURCE_CONFIG\fR keyword of
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR \fIfilename\fR\fR
 .ad
 .RS 23n
-.rt  
 Import data from \fIfilename\fR, containing data previously exported from a
 Solaris DHCP server. Note that after importing, you may have to edit macros to
 specify the correct domain names, and edit network tables to change the owning
@@ -344,23 +309,19 @@ do this.
 The following sub-options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 6n
-.rt  
 Replace any conflicting data with the data being imported.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR\fR
 .ad
 .RS 6n
-.rt  
 Signal the daemon to reload the \fBdhcptab\fR once the import has been
 completed.
 .RE
@@ -369,34 +330,28 @@ completed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-N\fR \fInet_address\fR\fR
 .ad
 .RS 23n
-.rt  
 Configure an additional network for DHCP service.
 .sp
 The following sub-options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fINIS_server_addresses\fR\fR
 .ad
 .RS 27n
-.rt  
 List of IP addresses of NIS servers.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR\fR
 .ad
 .RS 27n
-.rt  
 Network is a point-to-point (PPP) network, therefore no broadcast address
 should be configured. If \fB-\fRb is not used, the network is assumed to be a
 LAN, and the broadcast address is determined using the network address and
@@ -405,46 +360,38 @@ subnet mask.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR\fR
 .ad
 .RS 27n
-.rt  
 Signal the daemon to reload the \fBdhcptab\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fIxxx.xxx.xxx.xxx\fR\fR
 .ad
 .RS 27n
-.rt  
 Subnet mask for the network; if \fB-m\fR is not used, subnet mask is obtained
 from netmasks.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fIrouter_addresses\fR\fR
 .ad
 .RS 27n
-.rt  
 List of router IP addresses; if not specified, router discovery flag is set.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-y\fR \fINIS_domain_name\fR\fR
 .ad
 .RS 27n
-.rt  
 If NIS is used on this network, specify the NIS domain name.
 .RE
 
@@ -452,12 +399,10 @@ If NIS is used on this network, specify the NIS domain name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR\fR
 .ad
 .RS 23n
-.rt  
 Configure the DHCP service parameters. Each parameter and value are specified
 by the following pattern:
 .sp
@@ -471,12 +416,10 @@ by the following pattern:
 Where parameter and value are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIparameter\fR\fR
 .ad
 .RS 13n
-.rt  
 One of the DHCP service parameters listed in \fBdhcpsvc.conf\fR(4). If the
 corresponding \fIvalue\fR is not specified, the current parameter value is
 displayed. If \fIparameter\fR is not specified, all parameters and current
@@ -485,12 +428,10 @@ values are displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIvalue\fR\fR
 .ad
 .RS 13n
-.rt  
 Optional string to set the servers parameter to if the value is acceptable. If
 the value is missing or is empty (\fB""\fR), the parameter and its current
 value are deleted.
@@ -502,12 +443,10 @@ can use new parameter values.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIserver_addresses\fR\fR
 .ad
 .RS 23n
-.rt  
 Configure the BOOTP relay service. BOOTP or DHCP requests are forwarded to the
 list of servers specified.
 .sp
@@ -517,45 +456,37 @@ addresses.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR\fR
 .ad
 .RS 23n
-.rt  
 Control the DHCP service.
 .sp
 The following sub-options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 6n
-.rt  
  Disable and stop the DHCP service.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
 .RS 6n
-.rt  
 Enable and start the DHCP service.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
 .RS 6n
-.rt  
 Display the state of the DHCP service. The state is encoded into the exit
 status.
 .sp
@@ -573,12 +504,10 @@ status.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 6n
-.rt  
 Enable and restart the DHCP service.
 .RE
 
@@ -586,46 +515,38 @@ Enable and restart the DHCP service.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-U\fR\fR
 .ad
 .RS 23n
-.rt  
 Unconfigure the DHCP service or BOOTP relay service.
 .sp
 The following sub-options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 6n
-.rt  
 Do not prompt for confirmation. If \fB-f\fR is not used, a warning and
 confirmation prompt is issued.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 6n
-.rt  
 Delete hosts entries from name service.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
 .RS 6n
-.rt  
 Delete the \fBdhcptab\fR and network tables.
 .RE
 
@@ -633,72 +554,60 @@ Delete the \fBdhcptab\fR and network tables.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-X\fR \fIfilename\fR\fR
 .ad
 .RS 23n
-.rt  
 Export data from the DHCP data tables, saving to \fIfilename\fR, to move the
 data to another Solaris DHCP server.
 .sp
 The following sub-options are optional:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fInetworks_to_export\fR\fR
 .ad
 .RS 25n
-.rt  
 List of networks whose addresses should be exported, or the keyword ALL to
 specify all networks. If \fB-a\fR is not specified, no networks are exported.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR \fR
 .ad
 .RS 25n
-.rt  
 Signal the daemon to reload the \fBdhcptab\fR after the export has been
 completed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fImacros_to_export\fR\fR
 .ad
 .RS 25n
-.rt  
 List of macros to export, or the keyword \fBALL\fR to specify all macros. If
 \fB-m\fR is not specified, no macros are exported.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIoptions_to_export\fR\fR
 .ad
 .RS 25n
-.rt  
 List of options to export, or the keyword \fBALL\fR to specify all options. If
 \fB-o\fR is not specified, no options are exported.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
 .RS 25n
-.rt  
 Delete the data from this server after it is exported. If \fB-x\fR is not
 specified you are in effect copying the data.
 .RE
@@ -863,13 +772,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/dhcpmgr.1m b/usr/src/man/man1m/dhcpmgr.1m
index 0adaedc83c..f90906b7b6 100644
--- a/usr/src/man/man1m/dhcpmgr.1m
+++ b/usr/src/man/man1m/dhcpmgr.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH dhcpmgr 1M "13 Mar 2001" "SunOS 5.11" "System Administration Commands"
+.TH DHCPMGR 1M "Mar 13, 2001"
 .SH NAME
 dhcpmgr \- graphical interface for managing DHCP service
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sadm/admin/bin/dhcpmgr\fR 
+\fB/usr/sadm/admin/bin/dhcpmgr\fR
 .fi
 
 .SH DESCRIPTION
@@ -27,7 +27,6 @@ contains detailed information about using the tool.
 You can perform the following tasks using \fBdhcpmgr\fR:
 .sp
 .ne 2
-.mk
 .na
 \fBConfigure DHCP service\fR
 .ad
@@ -39,7 +38,6 @@ select the data store to use for storing network configuration tables..
 
 .sp
 .ne 2
-.mk
 .na
 \fBConfigure BOOTP relay service\fR
 .ad
@@ -50,7 +48,6 @@ Use \fBdhcpmgr\fR to configure the DHCP daemon as a \fBBOOTP\fR relay.
 
 .sp
 .ne 2
-.mk
 .na
 \fBManage DHCP or BOOTP relay service\fR
 .ad
@@ -62,7 +59,6 @@ service or \fBBOOTP\fR relay service, or change DHCP server parameters.
 
 .sp
 .ne 2
-.mk
 .na
 \fBManage DHCP addresses\fR
 .ad
@@ -74,7 +70,6 @@ Use \fBdhcpmgr\fR to add, modify, or delete \fBIP\fR addresses leased by the
 
 .sp
 .ne 2
-.mk
 .na
 \fBManage DHCP macros\fR
 .ad
@@ -86,7 +81,6 @@ parameters to \fBDHCP\fR clients.
 
 .sp
 .ne 2
-.mk
 .na
 \fBManage DHCP options\fR
 .ad
@@ -98,7 +92,6 @@ deliverable through \fBDHCP\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBConvert to a new DHCP data store\fR
 .ad
@@ -110,7 +103,6 @@ and convert the DHCP data to the format used by the new data store.
 
 .sp
 .ne 2
-.mk
 .na
 \fBMove DHCP data to another server\fR
 .ad
@@ -126,23 +118,19 @@ onto another Solaris DHCP server.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR \fR
 .ad
 .RS 13n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnon-zero\fR \fR
 .ad
 .RS 13n
-.rt  
 An error occurred.
 .RE
 
@@ -154,13 +142,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/dhtadm.1m b/usr/src/man/man1m/dhtadm.1m
index 4f1f282f34..9ff782808e 100644
--- a/usr/src/man/man1m/dhtadm.1m
+++ b/usr/src/man/man1m/dhtadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH dhtadm 1M "28 Aug 2004" "SunOS 5.11" "System Administration Commands"
+.TH DHTADM 1M "Aug 28, 2004"
 .SH NAME
 dhtadm \- DHCP configuration table management utility
 .SH SYNOPSIS
@@ -14,55 +14,55 @@ dhtadm \- DHCP configuration table management utility
 
 .LP
 .nf
-\fBdhtadm\fR \fB-A\fR \fB-s\fR \fIsymbol_name\fR \fB-d\fR \fIdefinition\fR [\fB-r\fR \fIresource\fR] 
+\fBdhtadm\fR \fB-A\fR \fB-s\fR \fIsymbol_name\fR \fB-d\fR \fIdefinition\fR [\fB-r\fR \fIresource\fR]
      [\fB-p\fR \fIpath\fR] [\fB-u\fR \fIuninterpreted\fR] [\fB-g\fR]
 .fi
 
 .LP
 .nf
-\fBdhtadm\fR \fB-A\fR \fB-m\fR \fImacro_name\fR \fB-d\fR \fIdefinition\fR [\fB-r\fR \fIresource\fR] 
+\fBdhtadm\fR \fB-A\fR \fB-m\fR \fImacro_name\fR \fB-d\fR \fIdefinition\fR [\fB-r\fR \fIresource\fR]
      [\fB-p\fR \fIpath\fR] [\fB-u\fR \fIuninterpreted\fR] [\fB-g\fR]
 .fi
 
 .LP
 .nf
-\fBdhtadm\fR \fB-M\fR \fB-s\fR \fIsymbol_name\fR \fB-d\fR \fIdefinition\fR [\fB-r\fR \fIresource\fR] 
+\fBdhtadm\fR \fB-M\fR \fB-s\fR \fIsymbol_name\fR \fB-d\fR \fIdefinition\fR [\fB-r\fR \fIresource\fR]
      [\fB-p\fR \fIpath\fR] [\fB-u\fR \fIuninterpreted\fR] [\fB-g\fR]
 .fi
 
 .LP
 .nf
-\fBdhtadm\fR \fB-M\fR \fB-s\fR \fIsymbol_name\fR \fB-n\fR \fInew_name\fR [\fB-r\fR \fIresource\fR] 
+\fBdhtadm\fR \fB-M\fR \fB-s\fR \fIsymbol_name\fR \fB-n\fR \fInew_name\fR [\fB-r\fR \fIresource\fR]
      [\fB-p\fR \fIpath\fR] [\fB-u\fR \fIuninterpreted\fR] [\fB-g\fR]
 .fi
 
 .LP
 .nf
-\fBdhtadm\fR \fB-M\fR \fB-m\fR \fImacro_name\fR \fB-n\fR \fInew_name\fR [\fB-r\fR \fIresource\fR] [\fB-p\fR \fIpath\fR] 
+\fBdhtadm\fR \fB-M\fR \fB-m\fR \fImacro_name\fR \fB-n\fR \fInew_name\fR [\fB-r\fR \fIresource\fR] [\fB-p\fR \fIpath\fR]
      [\fB-u\fR \fIuninterpreted\fR] [\fB-g\fR]
 .fi
 
 .LP
 .nf
-\fBdhtadm\fR \fB-M\fR \fB-m\fR \fImacro_name\fR \fB-d\fR \fIdefinition\fR [\fB-r\fR \fIresource\fR] 
+\fBdhtadm\fR \fB-M\fR \fB-m\fR \fImacro_name\fR \fB-d\fR \fIdefinition\fR [\fB-r\fR \fIresource\fR]
      [\fB-p\fR \fIpath\fR] [\fB-u\fR \fIuninterpreted\fR] [\fB-g\fR]
 .fi
 
 .LP
 .nf
-\fBdhtadm\fR \fB-M\fR \fB-m\fR \fImacro_name\fR \fB-e\fR \fIsymbol=value\fR [\fB-r\fR \fIresource\fR] 
+\fBdhtadm\fR \fB-M\fR \fB-m\fR \fImacro_name\fR \fB-e\fR \fIsymbol=value\fR [\fB-r\fR \fIresource\fR]
      [\fB-p\fR \fIpath\fR] [\fB-u\fR \fIuninterpreted\fR] [\fB-g\fR]
 .fi
 
 .LP
 .nf
-\fBdhtadm\fR \fB-D\fR \fB-s\fR \fIsymbol_name\fR [\fB-r\fR \fIresource\fR] [\fB-p\fR \fIpath\fR] 
+\fBdhtadm\fR \fB-D\fR \fB-s\fR \fIsymbol_name\fR [\fB-r\fR \fIresource\fR] [\fB-p\fR \fIpath\fR]
      [\fB-u\fR \fIuninterpreted\fR] [\fB-g\fR]
 .fi
 
 .LP
 .nf
-\fBdhtadm\fR \fB-D\fR \fB-m\fR \fImacro_name\fR [\fB-r\fR \fIresource\fR] [\fB-p\fR \fIpath\fR] 
+\fBdhtadm\fR \fB-D\fR \fB-m\fR \fImacro_name\fR [\fB-r\fR \fIresource\fR] [\fB-p\fR \fIpath\fR]
      [\fB-u\fR \fIuninterpreted\fR] [\fB-g\fR]
 .fi
 
@@ -108,23 +108,19 @@ command: \fB-A\fR, \fB-B\fR, \fB-C\fR, \fB-D\fR, \fB-M\fR, \fB-P\fR or
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR \fR
 .ad
 .RS 27n
-.rt  
 Add a symbol or macro definition to the \fBdhcptab\fR table.
 .sp
 The following sub-options are required:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdefinition\fR\fR
 .ad
 .RS 18n
-.rt  
 Specify a macro or symbol definition.
 .sp
 \fIdefinition\fR must be enclosed in single quotation marks. For macros, use
@@ -139,12 +135,10 @@ See \fBdhcptab\fR(4) for information about these fields.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fImacro_name\fR\fR
 .ad
 .RS 18n
-.rt  
 Specify the name of the macro to be added.
 .sp
 The \fB-d\fR option must be used with the \fB-m\fR option. The \fB-s\fR option
@@ -153,12 +147,10 @@ cannot be used with the \fB-m\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsymbol_name\fR\fR
 .ad
 .RS 18n
-.rt  
 Specify the name of the symbol to be added.
 .sp
 The \fB-d\fR option must be used with the \fB-s\fR option. The \fB-m\fR option
@@ -169,12 +161,10 @@ cannot be used with the \fB-s\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-B\fR\fR
 .ad
 .RS 27n
-.rt  
 Batch process \fBdhtadm\fR commands. \fBdhtadm\fR reads from the specified file
 or from standard input a series of \fBdhtadm\fR commands and execute them
 within the same process. Processing many \fBdhtadm\fR commands using this
@@ -184,12 +174,10 @@ is recommended for using \fBdhtadm\fR in scripts.
 The following sub-option is optional:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 Display commands to standard output as they are processed.
 .RE
 
@@ -197,45 +185,37 @@ Display commands to standard output as they are processed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR \fR
 .ad
 .RS 27n
-.rt  
 Create the \fBDHCP\fR service configuration table, \fBdhcptab\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR \fR
 .ad
 .RS 27n
-.rt  
 Delete a symbol or macro definition.
 .sp
 The following sub-options are required:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fImacro_name\fR\fR
 .ad
 .RS 18n
-.rt  
 Delete the specified macro.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsymbol_name\fR\fR
 .ad
 .RS 18n
-.rt  
 Delete the specified symbol.
 .RE
 
@@ -243,35 +223,29 @@ Delete the specified symbol.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR \fR
 .ad
 .RS 27n
-.rt  
 Signal the DHCP daemon to reload the \fBdhcptab\fR after successful completion
 of the operation.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR \fR
 .ad
 .RS 27n
-.rt  
 Modify an existing symbol or macro definition.
 .sp
 The following sub-options are required:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdefinition\fR\fR
 .ad
 .RS 17n
-.rt  
 Specify a macro or symbol definition to modify.
 .sp
 The definition must be enclosed in single quotation marks. For macros, use the
@@ -285,12 +259,10 @@ See \fBdhcptab\fR(4) for information about these fields.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
 .RS 17n
-.rt  
 This sub-option uses the \fIsymbol\fR \fB=\fR\fIvalue\fR argument. Use it to
 edit a \fIsymbol\fR/\fIvalue\fR pair within a macro. To add a symbol which does
 not have an associate value, enter:
@@ -315,24 +287,20 @@ To delete a symbol definition from a macro, enter:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
 .RS 17n
-.rt  
 This sub-option uses the \fImacro_name\fR argument. The \fB-n\fR, \fB-d\fR, or
 \fB-e\fR sub-options are legal companions for this sub-option..
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 17n
-.rt  
 This sub-option uses the \fInew_name\fR argument and modifies the name of the
 object specified by the \fB-m\fR or \fB-s\fR sub-option. It is not limited to
 macros. . Use it to specify a new macro name or symbol name.
@@ -340,12 +308,10 @@ macros. . Use it to specify a new macro name or symbol name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 17n
-.rt  
 This sub-option uses the \fIsymbol_name\fR argument. Use it to specify a
 symbol. The \fB-d\fR sub-option is a legal companion.
 .RE
@@ -354,12 +320,10 @@ symbol. The \fB-d\fR sub-option is a legal companion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fI path\fR \fR
 .ad
 .RS 27n
-.rt  
 Override the \fBdhcpsvc.conf\fR(4) configuration value for \fBPATH=\fR with
 \fIpath\fR. See \fBdhcpsvc.conf\fR(4) for more details regarding \fIpath\fR.
 See \fBdhcp_modules\fR(5) for information regarding data storage modules for
@@ -368,23 +332,19 @@ the \fBDHCP\fR service.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fR
 .ad
 .RS 27n
-.rt  
 Print (display) the \fBdhcptab\fR table.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fI data_store_resource\fR \fR
 .ad
 .RS 27n
-.rt  
 Override the \fBdhcpsvc.conf\fR(4) configuration value for \fBRESOURCE=\fR with
 the \fIdata_store_resource\fR specified. See \fBdhcpsvc.conf\fR(4) for more
 details on resource type. See\fI\fR for more information about adding support
@@ -394,23 +354,19 @@ storage modules for the \fBDHCP\fR service.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fR
 .ad
 .RS 27n
-.rt  
 Remove the \fBdhcptab\fR table.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fI uninterpreted\fR\fR
 .ad
 .RS 27n
-.rt  
 Data which is ignored by \fBdhtadm\fR, but passed to currently configured
 public module, to be interpreted by the data store. The private layer provides
 for module-specific configuration information through the use of the
@@ -447,7 +403,7 @@ resource in the \fB/var/mydhcp\fR directory:
 .sp
 .in +2
 .nf
-# dhtadm \fB-A\fR \fB-s\fR MySym 
+# dhtadm \fB-A\fR \fB-s\fR MySym
    \fB-d\fR 'Vendor=SUNW.PCW.LAN,20,IP,1,0'
    \fB-r\fR SUNWfiles \fB-p\fR /var/mydhcp
 .fi
@@ -578,7 +534,7 @@ The following command prints to standard output the contents of the
 .sp
 .in +2
 .nf
-# dhtadm \fB-P\fR 
+# dhtadm \fB-P\fR
 .fi
 .in -2
 .sp
@@ -602,69 +558,57 @@ have been executed: :
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR \fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR \fR
 .ad
 .RS 6n
-.rt  
 Object already exists.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR \fR
 .ad
 .RS 6n
-.rt  
 Object does not exist.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR \fR
 .ad
 .RS 6n
-.rt  
 Non-critical error.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR \fR
 .ad
 .RS 6n
-.rt  
 Critical error.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/dhcpsvc.conf\fR \fR
 .ad
 .RS 27n
-.rt  
- 
+
 .RE
 
 .SH ATTRIBUTES
@@ -675,13 +619,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-\fBATTRIBUTE TYPE\fR\fBATTRIBUTE VALUE\fR
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/disks.1m b/usr/src/man/man1m/disks.1m
index 99b0d80657..cea13c7f0f 100644
--- a/usr/src/man/man1m/disks.1m
+++ b/usr/src/man/man1m/disks.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH disks 1M "2 Jul 2009" "SunOS 5.11" "System Administration Commands"
+.TH DISKS 1M "Jul 2, 2009"
 .SH NAME
 disks \- creates /dev entries for hard disks attached to the system
 .SH SYNOPSIS
@@ -128,12 +128,10 @@ type: \fBDDI_NT_BLOCK,\fR \fBDDI_NT_BLOCK_CHAN,\fR \fBDDI_NT_CD,\fR or
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR\fR
 .ad
 .RS 14n
-.rt  
 Causes disks to remove any invalid links after adding any new entries to
 \fB/dev/dsk\fR and \fB/dev/rdsk\fR. Invalid links are links which refer to
 non-existent disk nodes that have been removed, powered off, or are otherwise
@@ -142,12 +140,10 @@ inaccessible.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrootdir\fR\fR
 .ad
 .RS 14n
-.rt  
 Causes \fBdisks\fR to presume that the \fB/dev/dsk\fR, \fB/dev/rdsk\fR and
 \fB/devices\fR directory trees are found under \fIrootdir\fR, not directly
 under \fB/\fR.
@@ -280,34 +276,28 @@ and /dev/rdsk will contain the disk entries for the character device nodes in
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/dsk/*\fR\fR
 .ad
 .RS 15n
-.rt  
 Disk entries (block device interface)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/rdsk/*\fR\fR
 .ad
 .RS 15n
-.rt  
 Disk entries (character device interface)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/devices/*\fR\fR
 .ad
 .RS 15n
-.rt  
 Device special files (minor device nodes)
 .RE
 
diff --git a/usr/src/man/man1m/diskscan.1m b/usr/src/man/man1m/diskscan.1m
index 045f4dacc9..d22e66752a 100644
--- a/usr/src/man/man1m/diskscan.1m
+++ b/usr/src/man/man1m/diskscan.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH diskscan 1M "24 Feb 1998" "SunOS 5.11" "System Administration Commands"
+.TH DISKSCAN 1M "Feb 24, 1998"
 .SH NAME
 diskscan \- perform surface analysis
 .SH SYNOPSIS
@@ -28,36 +28,30 @@ remap them.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 6n
-.rt  
 Causes  \fBdiskscan\fR to suppress linefeeds when printing progress information
 on standard out.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-W\fR\fR
 .ad
 .RS 6n
-.rt  
 Causes \fBdiskscan\fR to perform write and read surface analysis. This type of
 surface analysis is destructive and should be invoked with caution.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-y\fR\fR
 .ad
 .RS 6n
-.rt  
 Causes  \fBdiskscan\fR to suppress the warning regarding destruction of
 existing data that is issued when  \fB-W\fR is used.
 .RE
@@ -68,12 +62,10 @@ existing data that is issued when  \fB-W\fR is used.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIraw_device\fR\fR
 .ad
 .RS 14n
-.rt  
 The address of the disk drive (see \fBFILES\fR).
 .RE
 
@@ -90,13 +82,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Architecturex86
+Architecture	x86
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/dispadmin.1m b/usr/src/man/man1m/dispadmin.1m
index 1d07c16fed..578bb8da87 100644
--- a/usr/src/man/man1m/dispadmin.1m
+++ b/usr/src/man/man1m/dispadmin.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH dispadmin 1M "7 Oct 2008" "SunOS 5.11" "System Administration Commands"
+.TH DISPADMIN 1M "Oct 7, 2008"
 .SH NAME
 dispadmin \- process scheduler administration
 .SH SYNOPSIS
@@ -40,7 +40,6 @@ performance. (See \fISystem Administration Guide: Advanced Administration\fR.)
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIclass\fR\fR
 .ad
@@ -56,7 +55,6 @@ parameters of one will change those of the other.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR [\fIclass\fR]\fR
 .ad
@@ -73,7 +71,6 @@ class.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR\fR
 .ad
@@ -92,7 +89,6 @@ the table at the same time you are overwriting it.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
@@ -103,7 +99,6 @@ Lists the scheduler classes currently configured in the system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIres\fR\fR
 .ad
@@ -123,7 +118,6 @@ specified resolution.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIfile\fR\fR
 .ad
@@ -217,7 +211,6 @@ dispadmin \fB-c\fR TS \fB-s\fR ts.config
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dispadmin.conf\fR\fR
 .ad
diff --git a/usr/src/man/man1m/dladm.1m b/usr/src/man/man1m/dladm.1m
index 3a7355f91f..bf20443ad8 100644
--- a/usr/src/man/man1m/dladm.1m
+++ b/usr/src/man/man1m/dladm.1m
@@ -8,7 +8,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH dladm 1M "23 Sep 2009" "SunOS 5.11" "System Administration Commands"
+.TH DLADM 1M "Sep 23, 2009"
 .SH NAME
 dladm \- administer data links
 .SH SYNOPSIS
@@ -26,12 +26,12 @@ dladm \- administer data links
 
 .LP
 .nf
-\fBdladm create-aggr\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] [\fB-P\fR \fIpolicy\fR] [\fB-L\fR \fImode\fR] 
+\fBdladm create-aggr\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] [\fB-P\fR \fIpolicy\fR] [\fB-L\fR \fImode\fR]
      [\fB-T\fR \fItime\fR] [\fB-u\fR \fIaddress\fR] \fB-l\fR \fIether-link1\fR [\fB-l\fR \fIether-link2\fR...] \fIaggr-link\fR
-\fBdladm modify-aggr\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] [\fB-P\fR \fIpolicy\fR] [\fB-L\fR \fImode\fR] 
+\fBdladm modify-aggr\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] [\fB-P\fR \fIpolicy\fR] [\fB-L\fR \fImode\fR]
      [\fB-T\fR \fItime\fR] [\fB-u\fR \fIaddress\fR] \fIaggr-link\fR
 \fBdladm delete-aggr\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] \fIaggr-link\fR
-\fBdladm add-aggr\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] \fB-l\fR \fIether-link1\fR [\fB-l\fR \fIether-link2\fR...] 
+\fBdladm add-aggr\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] \fB-l\fR \fIether-link1\fR [\fB-l\fR \fIether-link2\fR...]
      \fIaggr-link\fR
 \fBdladm remove-aggr\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] \fB-l\fR \fIether-link1\fR [\fB-l\fR \fIether-link2\fR...]
      \fIaggr-link\fR
@@ -112,8 +112,8 @@ dladm \- administer data links
 
 .LP
 .nf
-\fBdladm create-vnic\fR [\fB-t\fR] \fB-l\fR \fIlink\fR [\fB-R\fR \fIroot-dir\fR] [\fB-m\fR \fIvalue\fR | auto | 
-     {factory \fB-n\fR \fIslot-identifier\fR]} | {random [\fB-r\fR \fIprefix\fR]}] 
+\fBdladm create-vnic\fR [\fB-t\fR] \fB-l\fR \fIlink\fR [\fB-R\fR \fIroot-dir\fR] [\fB-m\fR \fIvalue\fR | auto |
+     {factory \fB-n\fR \fIslot-identifier\fR]} | {random [\fB-r\fR \fIprefix\fR]}]
      [\fB-v\fR \fIvlan-id\fR] [\fB-p\fR \fIprop\fR=\fIvalue\fR[,...]] \fIvnic-link\fR
 \fBdladm delete-vnic\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] \fIvnic-link\fR
 \fBdladm show-vnic\fR [\fB-pP\fR] [\fB-s\fR [\fB-i\fR \fIinterval\fR]] [\fB-o\fR \fIfield\fR[,...]]
@@ -155,7 +155,6 @@ or receive packets from a network.
 Each \fBdladm\fR subcommand operates on one of the following objects:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlink\fR\fR
 .ad
@@ -172,7 +171,6 @@ Some subcommands operate only on certain types or classes of datalinks. For
 those cases, the following object names are used:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBphys-link\fR\fR
 .ad
@@ -183,7 +181,6 @@ A physical datalink.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvlan-link\fR\fR
 .ad
@@ -194,7 +191,6 @@ A VLAN datalink.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaggr-link\fR\fR
 .ad
@@ -205,7 +201,6 @@ An aggregation datalink (or a key; see NOTES).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBether-link\fR\fR
 .ad
@@ -216,7 +211,6 @@ A physical Ethernet datalink.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwifi-link\fR\fR
 .ad
@@ -227,7 +221,6 @@ A WiFi datalink.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvnic-link\fR\fR
 .ad
@@ -240,7 +233,6 @@ machine.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBiptun-link\fR\fR
 .ad
@@ -253,7 +245,6 @@ An IP tunnel link.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdev\fR\fR
 .ad
@@ -265,7 +256,6 @@ number.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBetherstub\fR\fR
 .ad
@@ -279,7 +269,6 @@ hardware.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbridge\fR\fR
 .ad
@@ -296,7 +285,6 @@ name, used for observability.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsecobj\fR\fR
 .ad
@@ -315,7 +303,6 @@ Each \fBdladm\fR subcommand has its own set of options. However, many of the
 subcommands have the following as a common option:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -331,7 +318,6 @@ deletion, or renaming-should apply.
 The following subcommands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm show-link\fR [\fB-P\fR] [\fB-s\fR [\fB-i\fR \fIinterval\fR]]
 [[\fB-p\fR] \fB-o\fR \fIfield\fR[,...]][\fIlink\fR]\fR
@@ -343,7 +329,6 @@ datalinks or for the specified link \fIlink\fR. By default, the system is
 configured with one datalink for each known network device.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIfield\fR[,...], \fB--output\fR=\fIfield\fR[,...]\fR
 .ad
@@ -355,7 +340,6 @@ of the fields listed below, or the special value \fBall\fR to display all
 fields. By default (without \fB-o\fR), \fBshow-link\fR displays all fields.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLINK\fR\fR
 .ad
@@ -366,7 +350,6 @@ The name of the datalink.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCLASS\fR\fR
 .ad
@@ -376,7 +359,6 @@ The class of the datalink. \fBdladm\fR distinguishes between the following
 classes:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBphys\fR\fR
 .ad
@@ -388,7 +370,6 @@ this class of datalink.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaggr\fR\fR
 .ad
@@ -400,7 +381,6 @@ detail for this class of datalink.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvlan\fR\fR
 .ad
@@ -412,7 +392,6 @@ class of datalink.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvnic\fR\fR
 .ad
@@ -426,7 +405,6 @@ detail for this class of datalink.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMTU\fR\fR
 .ad
@@ -437,7 +415,6 @@ The maximum transmission unit size for the datalink being displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSTATE\fR\fR
 .ad
@@ -449,7 +426,6 @@ The link state of the datalink. The state can be \fBup\fR, \fBdown\fR, or
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBBRIDGE\fR\fR
 .ad
@@ -460,7 +436,6 @@ The name of the bridge to which this link is assigned, if any.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBOVER\fR\fR
 .ad
@@ -477,7 +452,6 @@ to display link statistics, the field name must be one of the fields listed
 below, or the special value \fBall\fR to display all fields
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLINK\fR\fR
 .ad
@@ -488,7 +462,6 @@ The name of the datalink.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBIPACKETS\fR\fR
 .ad
@@ -499,7 +472,6 @@ Number of packets received on this link.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRBYTES\fR\fR
 .ad
@@ -510,7 +482,6 @@ Number of bytes received on this link.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBIERRORS\fR\fR
 .ad
@@ -521,7 +492,6 @@ Number of input errors.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBOPACKETS\fR\fR
 .ad
@@ -532,7 +502,6 @@ Number of packets sent on this link.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBOBYTES\fR\fR
 .ad
@@ -543,7 +512,6 @@ Number of bytes received on this link.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBOERRORS\fR\fR
 .ad
@@ -556,7 +524,6 @@ Number of output errors.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR, \fB--parseable\fR\fR
 .ad
@@ -568,7 +535,6 @@ required with \fB-p\fR. See "Parseable Output Format", below.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR, \fB--persistent\fR\fR
 .ad
@@ -579,7 +545,6 @@ Display the persistent link configuration.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR, \fB--statistics\fR\fR
 .ad
@@ -590,7 +555,6 @@ Display link statistics.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIinterval\fR, \fB--interval\fR=\fIinterval\fR\fR
 .ad
@@ -605,7 +569,6 @@ will be displayed only once.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm rename-link\fR [\fB-R\fR \fIroot-dir\fR] \fIlink\fR
 \fInew-link\fR\fR
@@ -618,7 +581,6 @@ removed device with a new device. See the \fBEXAMPLES\fR section for specific
 examples of how this subcommand is used.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -631,7 +593,6 @@ See "Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm delete-phys\fR \fIphys-link\fR\fR
 .ad
@@ -644,7 +605,6 @@ the \fBEXAMPLES\fR section.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm show-phys\fR [\fB-P\fR] [[\fB-p\fR] \fB-o\fR \fIfield\fR[,...]]
 [\fB-H\fR] [\fIphys-link\fR]\fR
@@ -656,7 +616,6 @@ physical link. Without \fB-P\fR, only physical links that are available on the
 running system are displayed.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-H\fR\fR
 .ad
@@ -666,7 +625,6 @@ Show hardware resource usage, as returned by the NIC driver. Output from
 \fB-H\fR displays the following elements:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLINK\fR\fR
 .ad
@@ -677,7 +635,6 @@ A physical device corresponding to a NIC driver.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBGROUP\fR\fR
 .ad
@@ -688,7 +645,6 @@ A collection of rings.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBGROUPTYPE\fR\fR
 .ad
@@ -699,7 +655,6 @@ RX or TX. All rings in a group are of the same group type.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRINGS\fR\fR
 .ad
@@ -711,7 +666,6 @@ different groups.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCLIENTS\fR\fR
 .ad
@@ -724,7 +678,6 @@ MAC clients that are using the rings within a group.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIfield\fR, \fB--output\fR=\fIfield\fR\fR
 .ad
@@ -735,7 +688,6 @@ name must be one of the fields listed below, or the special value \fBall\fR, to
 display all fields. For each link, the following fields can be displayed:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLINK\fR\fR
 .ad
@@ -746,7 +698,6 @@ The name of the datalink.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMEDIA\fR\fR
 .ad
@@ -757,7 +708,6 @@ The media type provided by the physical datalink.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSTATE\fR\fR
 .ad
@@ -768,7 +718,6 @@ The state of the link. This can be \fBup\fR, \fBdown\fR, or \fBunknown\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSPEED\fR\fR
 .ad
@@ -779,7 +728,6 @@ The current speed of the link, in megabits per second.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDUPLEX\fR\fR
 .ad
@@ -792,7 +740,6 @@ cases.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDEVICE\fR\fR
 .ad
@@ -805,7 +752,6 @@ The name of the physical device under this link.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR, \fB--parseable\fR\fR
 .ad
@@ -817,7 +763,6 @@ required with \fB-p\fR. See "Parseable Output Format", below.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR, \fB--persistent\fR\fR
 .ad
@@ -834,7 +779,6 @@ used to purge the link's configuration from the system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm create-aggr\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] [\fB-P\fR
 \fIpolicy\fR] [\fB-L\fR \fImode\fR] [\fB-T\fR \fItime\fR] [\fB-u\fR
@@ -856,7 +800,6 @@ specify a policy, \fBcreate-aggr\fR uses the default, the L4 policy, described
 under the \fB-P\fR option.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIether-link\fR, \fB--link\fR=\fIether-link\fR\fR
 .ad
@@ -874,7 +817,6 @@ accept \fB-d\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--temporary\fR\fR
 .ad
@@ -886,7 +828,6 @@ the next reboot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -897,7 +838,6 @@ See "Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIpolicy\fR, \fB--policy\fR=\fIpolicy\fR\fR
 .ad
@@ -913,7 +853,6 @@ policy is a list of one or more layers specifiers separated by commas. A layer
 specifier is one of the following:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBL2\fR\fR
 .ad
@@ -925,7 +864,6 @@ of the packet.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBL3\fR\fR
 .ad
@@ -937,7 +875,6 @@ of the packet.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBL4\fR\fR
 .ad
@@ -975,7 +912,6 @@ destination \fBIP\fR addresses, the following policy can be used:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR \fImode\fR, \fB--lacp-mode\fR=\fImode\fR\fR
 .ad
@@ -987,7 +923,6 @@ should operate. Supported values are \fBoff\fR, \fBactive\fR or \fBpassive\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fItime\fR, \fB--lacp-timer\fR=\fItime\fR\fR
 .ad
@@ -1003,7 +938,6 @@ Specifies the \fBLACP\fR timer value. The supported values are \fBshort\fR or
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIaddress\fR, \fB--unicast\fR=\fIaddress\fR\fR
 .ad
@@ -1018,7 +952,6 @@ set of addresses of the component devices.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm modify-aggr\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] [\fB-P\fR
 \fIpolicy\fR] [\fB-L\fR \fImode\fR] [\fB-T\fR \fItime\fR] [\fB-u\fR
@@ -1029,7 +962,6 @@ set of addresses of the component devices.
 Modify the parameters of the specified aggregation.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--temporary\fR\fR
 .ad
@@ -1041,7 +973,6 @@ the next reboot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -1052,7 +983,6 @@ See "Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIpolicy\fR, \fB--policy\fR=\fIpolicy\fR\fR
 .ad
@@ -1064,7 +994,6 @@ traffic. See \fBdladm create-aggr\fR for a description of valid policy values.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR \fImode\fR, \fB--lacp-mode\fR=\fImode\fR\fR
 .ad
@@ -1076,7 +1005,6 @@ should operate. Supported values are \fBoff\fR, \fBactive\fR, or \fBpassive\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fItime\fR, \fB--lacp-timer\fR=\fItime\fR\fR
 .ad
@@ -1092,7 +1020,6 @@ Specifies the \fBLACP\fR timer value. The supported values are \fBshort\fR or
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIaddress\fR, \fB--unicast\fR=\fIaddress\fR\fR
 .ad
@@ -1107,7 +1034,6 @@ set of addresses of the component devices.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm delete-aggr\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR]
 \fIaggr-link\fR\fR
@@ -1117,7 +1043,6 @@ set of addresses of the component devices.
 Deletes the specified aggregation.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--temporary\fR\fR
 .ad
@@ -1129,7 +1054,6 @@ next reboot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -1142,7 +1066,6 @@ See "Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm add-aggr\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] \fB-l\fR
 \fIether-link1\fR [\fB--link\fR=\fIether-link2\fR...] \fIaggr-link\fR\fR
@@ -1152,7 +1075,6 @@ See "Options," above.
 Adds links to the specified aggregation.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIether-link\fR, \fB--link\fR=\fIether-link\fR\fR
 .ad
@@ -1164,7 +1086,6 @@ added by supplying multiple \fB-l\fR options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--temporary\fR\fR
 .ad
@@ -1176,7 +1097,6 @@ next reboot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -1189,7 +1109,6 @@ See "Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm remove-aggr\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] \fB-l\fR
 \fIether-link1\fR [\fB--l\fR=\fIether-link2\fR...] \fIaggr-link\fR\fR
@@ -1199,7 +1118,6 @@ See "Options," above.
 Removes links from the specified aggregation.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIether-link\fR, \fB--link\fR=\fIether-link\fR\fR
 .ad
@@ -1211,7 +1129,6 @@ be added by supplying multiple \fB-l\fR options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--temporary\fR\fR
 .ad
@@ -1223,7 +1140,6 @@ next reboot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -1236,7 +1152,6 @@ See "Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm show-aggr\fR [\fB-PLx\fR] [\fB-s\fR [\fB-i\fR \fIinterval\fR]]
 [[\fB-p\fR] \fB-o\fR \fIfield\fR[,...]] [\fIaggr-link\fR]\fR
@@ -1249,7 +1164,6 @@ statistics, either for all aggregations or for the specified aggregation.
 By default (with no options), the following fields can be displayed:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLINK\fR\fR
 .ad
@@ -1260,7 +1174,6 @@ The name of the aggregation link.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPOLICY\fR\fR
 .ad
@@ -1272,7 +1185,6 @@ for a description of the possible values.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBADDRPOLICY\fR\fR
 .ad
@@ -1286,7 +1198,6 @@ a fixed MAC address.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLACPACTIVITY\fR\fR
 .ad
@@ -1299,7 +1210,6 @@ or \fBpassive\fR, as set by the \fB-l\fR option to \fBcreate-aggr\fR or
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLACPTIMER\fR\fR
 .ad
@@ -1311,7 +1221,6 @@ The LACP timer value of the aggregation as set by the \fB-T\fR option of
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFLAGS\fR\fR
 .ad
@@ -1326,7 +1235,6 @@ be defined in the future.
 The \fBshow-aggr\fR command accepts the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR, \fB--lacp\fR\fR
 .ad
@@ -1337,7 +1245,6 @@ underlying port. Most of the state information displayed by this option is
 defined by IEEE 802.3. With this option, the following fields can be displayed:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLINK\fR\fR
 .ad
@@ -1348,7 +1255,6 @@ The name of the aggregation link.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPORT\fR\fR
 .ad
@@ -1359,7 +1265,6 @@ The name of one of the underlying aggregation ports.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBAGGREGATABLE\fR\fR
 .ad
@@ -1370,7 +1275,6 @@ Whether the port can be added to the aggregation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSYNC\fR\fR
 .ad
@@ -1382,7 +1286,6 @@ aggregation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCOLL\fR\fR
 .ad
@@ -1393,7 +1296,6 @@ If \fByes\fR, collection of incoming frames is enabled on the associated port.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDIST\fR\fR
 .ad
@@ -1405,7 +1307,6 @@ port.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDEFAULTED\fR\fR
 .ad
@@ -1417,7 +1318,6 @@ received LACP data from the LACP partner).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEXPIRED\fR\fR
 .ad
@@ -1430,7 +1330,6 @@ If \fByes\fR, the receive state of the port is in the \fBEXPIRED\fR state.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR, \fB--extended\fR\fR
 .ad
@@ -1440,7 +1339,6 @@ Display additional aggregation information including detailed information on
 each underlying port. With \fB-x\fR, the following fields can be displayed:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLINK\fR\fR
 .ad
@@ -1451,7 +1349,6 @@ The name of the aggregation link.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPORT\fR\fR
 .ad
@@ -1462,7 +1359,6 @@ The name of one of the underlying aggregation ports.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSPEED\fR\fR
 .ad
@@ -1473,7 +1369,6 @@ The speed of the link or port in megabits per second.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDUPLEX\fR\fR
 .ad
@@ -1486,7 +1381,6 @@ cases.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSTATE\fR\fR
 .ad
@@ -1497,7 +1391,6 @@ The link state. This can be \fBup\fR, \fBdown\fR, or \fBunknown\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBADDRESS\fR\fR
 .ad
@@ -1508,7 +1401,6 @@ The MAC address of the link or port.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPORTSTATE\fR\fR
 .ad
@@ -1522,7 +1414,6 @@ or \fBattached\fR state.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIfield\fR[,...], \fB--output\fR=\fIfield\fR[,...]\fR
 .ad
@@ -1537,7 +1428,6 @@ fields listed under \fB-L\fR, above, can be used with \fB-o\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR, \fB--parseable\fR\fR
 .ad
@@ -1549,7 +1439,6 @@ required with \fB-p\fR. See "Parseable Output Format", below.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR, \fB--persistent\fR\fR
 .ad
@@ -1561,7 +1450,6 @@ running system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR, \fB--statistics\fR\fR
 .ad
@@ -1572,7 +1460,6 @@ Displays aggregation statistics.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIinterval\fR, \fB--interval\fR=\fIinterval\fR\fR
 .ad
@@ -1587,7 +1474,6 @@ will be displayed only once.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm create-bridge\fR [ \fB-P\fR \fIprotect\fR] [\fB-R\fR
 \fIroot-dir\fR] [ \fB-p\fR \fIpriority\fR] [ \fB-m\fR \fImax-age\fR] [ \fB-h\fR
@@ -1605,7 +1491,6 @@ Each bridge instance is separate, and there is no forwarding connection between
 bridges.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIprotect\fR, \fB--protect\fR=\fIprotect\fR\fR
 .ad
@@ -1618,7 +1503,6 @@ RBridges. The default value is \fBstp\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -1629,7 +1513,6 @@ See "Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIpriority\fR, \fB--priority\fR=\fIpriority\fR\fR
 .ad
@@ -1646,7 +1529,6 @@ downward to the next lower value that is divisible by 4096.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fImax-age\fR, \fB--max-age\fR=\fImax-age\fR\fR
 .ad
@@ -1662,7 +1544,6 @@ constraints.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIhello-time\fR, \fB--hello-time\fR=\fIhello-time\fR\fR
 .ad
@@ -1676,7 +1557,6 @@ default value is 2 seconds. Valid values are from 1 to 10 seconds. See the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIforward-delay\fR, \fB--forward-delay\fR=\fIforward-delay\fR\fR
 .ad
@@ -1705,7 +1585,6 @@ provides valid alternatives to the supplied values.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIforce-protocol\fR,
 \fB--force-protocol\fR=\fIforce-protocol\fR\fR
@@ -1721,7 +1600,6 @@ or \fB2\fR for STP and RSTP.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlink\fR, \fB--link\fR=\fIlink\fR\fR
 .ad
@@ -1743,7 +1621,6 @@ installed on the system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm modify-bridge\fR [ \fB-P\fR \fIprotect\fR] [\fB-R\fR
 \fIroot-dir\fR] [ \fB-p\fR \fIpriority\fR] [ \fB-m\fR \fImax-age\fR] [ \fB-h\fR
@@ -1762,7 +1639,6 @@ Bridge parameter modification requires the \fBPRIV_SYS_DL_CONFIG\fR privilege.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm delete-bridge\fR [\fB-R\fR \fIroot-dir\fR] \fIbridge-name\fR\fR
 .ad
@@ -1780,7 +1656,6 @@ The \fB-R\fR (\fB--root-dir\fR) option is the same as for the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm add-bridge\fR [\fB-R\fR \fIroot-dir\fR] \fB-l\fR \fIlink\fR
 [\fB-l\fR \fIlink\fR...] \fIbridge-name\fR\fR
@@ -1814,7 +1689,6 @@ The options are the same as for the \fBcreate-bridge\fR subcommand.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm remove-bridge\fR [\fB-R\fR \fIroot-dir\fR] \fB-l\fR \fIlink\fR
 [\fB-l\fR \fIlink\fR...] \fIbridge-name\fR\fR
@@ -1832,7 +1706,6 @@ The options are the same as for the \fBcreate-bridge\fR subcommand.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm show-bridge\fR [\fB-flt\fR] [\fB-s\fR [\fB-i\fR \fIinterval\fR]]
 [[\fB-p\fR] \fB-o\fR \fIfield\fR,...] [\fIbridge-name\fR]\fR
@@ -1847,7 +1720,6 @@ all bridges. The other forms require a specified bridge.
 The show-bridge subcommand accepts the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIinterval\fR, \fB--interval\fR=\fIinterval\fR\fR
 .ad
@@ -1860,7 +1732,6 @@ will be displayed only once.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR, \fB--statistics\fR\fR
 .ad
@@ -1872,7 +1743,6 @@ links. This option cannot be used with the \fB-f\fR and \fB-t\fR options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR, \fB--parseable\fR\fR
 .ad
@@ -1884,7 +1754,6 @@ below.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIfield\fR[,...], \fB--output\fR=\fIfield\fR[,...]\fR
 .ad
@@ -1899,7 +1768,6 @@ By default, the \fBshow-bridge\fR subcommand shows bridge configuration. The
 following fields can be shown:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBBRIDGE\fR\fR
 .ad
@@ -1910,7 +1778,6 @@ The name of the bridge.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBADDRESS\fR\fR
 .ad
@@ -1921,7 +1788,6 @@ The Bridge Unique Identifier value (MAC address).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPRIORITY\fR\fR
 .ad
@@ -1933,7 +1799,6 @@ Configured priority value; set by \fB-p\fR with \fBcreate-bridge\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBBMAXAGE\fR\fR
 .ad
@@ -1945,7 +1810,6 @@ Configured bridge maximum age; set by \fB-m\fR with \fBcreate-bridge\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBBHELLOTIME\fR\fR
 .ad
@@ -1957,7 +1821,6 @@ Configured bridge hello time; set by \fB-h\fR with \fBcreate-bridge\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBBFWDDELAY\fR\fR
 .ad
@@ -1969,7 +1832,6 @@ Configured forwarding delay; set by \fB-d\fR with \fBcreate-bridge\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFORCEPROTO\fR\fR
 .ad
@@ -1981,7 +1843,6 @@ and \fBmodify-bridge\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTCTIME\fR\fR
 .ad
@@ -1992,7 +1853,6 @@ Time, in seconds, since last topology change.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTCCOUNT\fR\fR
 .ad
@@ -2003,7 +1863,6 @@ Count of the number of topology changes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTCHANGE\fR\fR
 .ad
@@ -2014,7 +1873,6 @@ This indicates that a topology change was detected.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDESROOT\fR\fR
 .ad
@@ -2025,7 +1883,6 @@ Bridge Identifier of the root node.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBROOTCOST\fR\fR
 .ad
@@ -2036,7 +1893,6 @@ Cost of the path to the root node.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBROOTPORT\fR\fR
 .ad
@@ -2047,7 +1903,6 @@ Port number used to reach the root node.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMAXAGE\fR\fR
 .ad
@@ -2058,7 +1913,6 @@ Maximum age value from the root node.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBHELLOTIME\fR\fR
 .ad
@@ -2069,7 +1923,6 @@ Hello time value from the root node.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFWDDELAY\fR\fR
 .ad
@@ -2080,7 +1933,6 @@ Forward delay value from the root node.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBHOLDTIME\fR\fR
 .ad
@@ -2096,7 +1948,6 @@ When the \fB-s\fR option is specified, the \fBshow-bridge\fR subcommand shows
 bridge statistics. The following fields can be shown:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBBRIDGE\fR\fR
 .ad
@@ -2107,7 +1958,6 @@ Bridge name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDROPS\fR\fR
 .ad
@@ -2118,7 +1968,6 @@ Number of packets dropped due to resource problems.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFORWARDS\fR\fR
 .ad
@@ -2129,7 +1978,6 @@ Number of packets forwarded from one link to another.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMBCAST\fR\fR
 .ad
@@ -2140,7 +1988,6 @@ Number of multicast and broadcast packets handled by the bridge.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRECV\fR\fR
 .ad
@@ -2151,7 +1998,6 @@ Number of packets received on all attached links.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSENT\fR\fR
 .ad
@@ -2162,7 +2008,6 @@ Number of packets sent on all attached links.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBUNKNOWN\fR\fR
 .ad
@@ -2178,7 +2023,6 @@ By default, when the \fB-o\fR option is not specified, only the \fBBRIDGE\fR,
 The \fBshow-bridge\fR subcommand also accepts the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR, \fB--link\fR\fR
 .ad
@@ -2189,7 +2033,6 @@ to a single bridge instance. By using this option and without the \fB-s\fR
 option, the following fields can be displayed for each link:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLINK\fR\fR
 .ad
@@ -2200,7 +2043,6 @@ The link name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBINDEX\fR\fR
 .ad
@@ -2211,7 +2053,6 @@ Port (link) index number on the bridge.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSTATE\fR\fR
 .ad
@@ -2223,7 +2064,6 @@ State of the link. The state can be \fBdisabled\fR, \fBdiscarding\fR,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBUPTIME\fR\fR
 .ad
@@ -2234,7 +2074,6 @@ Number of seconds since the last reset or initialization.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBOPERCOST\fR\fR
 .ad
@@ -2245,7 +2084,6 @@ Actual cost in use (1-65535).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBOPERP2P\fR\fR
 .ad
@@ -2256,7 +2094,6 @@ This indicates whether point-to-point (\fBP2P\fR) mode been detected.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBOPEREDGE\fR\fR
 .ad
@@ -2267,7 +2104,6 @@ This indicates whether edge mode has been detected.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDESROOT\fR\fR
 .ad
@@ -2278,7 +2114,6 @@ The Root Bridge Identifier that has been seen on this port.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDESCOST\fR\fR
 .ad
@@ -2289,7 +2124,6 @@ Path cost to the network root node through the designated port.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDESBRIDGE\fR\fR
 .ad
@@ -2300,7 +2134,6 @@ Bridge Identifier for this port.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDESPORT\fR\fR
 .ad
@@ -2312,7 +2145,6 @@ this port.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTCACK\fR\fR
 .ad
@@ -2328,7 +2160,6 @@ When the \fB-l\fR option is specified, the \fB-s\fR option can be used to
 display the following fields for each link:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLINK\fR\fR
 .ad
@@ -2339,7 +2170,6 @@ Link name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCFGBPDU\fR\fR
 .ad
@@ -2350,7 +2180,6 @@ Number of configuration BPDUs received.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTCNBPDU\fR\fR
 .ad
@@ -2361,7 +2190,6 @@ Number of topology change BPDUs received.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRSTPBPDU\fR\fR
 .ad
@@ -2372,7 +2200,6 @@ Number of Rapid Spanning Tree BPDUs received.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTXBPDU\fR\fR
 .ad
@@ -2383,7 +2210,6 @@ Number of BPDUs transmitted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDROPS\fR\fR
 .ad
@@ -2394,7 +2220,6 @@ Number of packets dropped due to resource problems.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRECV\fR\fR
 .ad
@@ -2405,7 +2230,6 @@ Number of packets received by the bridge.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBXMIT\fR\fR
 .ad
@@ -2420,7 +2244,6 @@ When the \fB-o\fR option is not specified, only the \fBLINK\fR, \fBDROPS\fR,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR, \fB--forwarding\fR\fR
 .ad
@@ -2430,7 +2253,6 @@ Displays forwarding entries for a single bridge instance. With this option, the
 following fields can be shown for each forwarding entry:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDEST\fR\fR
 .ad
@@ -2441,7 +2263,6 @@ Destination MAC address.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBAGE\fR\fR
 .ad
@@ -2452,7 +2273,6 @@ Age of entry in seconds and milliseconds. Omitted for local entries.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFLAGS\fR\fR
 .ad
@@ -2464,7 +2284,6 @@ link or to a VNIC on one of the attached links.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBOUTPUT\fR\fR
 .ad
@@ -2481,7 +2300,6 @@ When the \fB-o\fR option is not specified, the \fBDEST\fR, \fBAGE\fR,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--trill\fR\fR
 .ad
@@ -2491,7 +2309,6 @@ Displays \fBTRILL\fR nickname entries for a single bridge instance. With this
 option, the following fields can be shown for each \fBTRILL\fR nickname entry:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNICK\fR\fR
 .ad
@@ -2502,7 +2319,6 @@ option, the following fields can be shown for each \fBTRILL\fR nickname entry:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFLAGS\fR\fR
 .ad
@@ -2513,7 +2329,6 @@ The \fBL\fR flag is shown if the nickname identifies the local system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLINK\fR\fR
 .ad
@@ -2524,7 +2339,6 @@ Link name for output when sending messages to this RBridge.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNEXTHOP\fR\fR
 .ad
@@ -2542,7 +2356,6 @@ When the \fB-o\fR option is not specified, the \fBNICK\fR, \fBFLAGS\fR,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm create-vlan\fR [\fB-ft\fR] [\fB-R\fR \fIroot-dir\fR] \fB-l\fR
 \fIether-link\fR \fB-v\fR \fIvid\fR [\fIvlan-link\fR]\fR
@@ -2566,7 +2379,6 @@ For example, if \fIether-link\fR is \fBbge1\fR and \fIvid\fR is 2, the name
 generated is \fBbge2001\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR, \fB--force\fR\fR
 .ad
@@ -2580,7 +2392,6 @@ resulting VLAN must be set to 1496 instead of 1500.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIether-link\fR\fR
 .ad
@@ -2591,7 +2402,6 @@ Specifies Ethernet link over which VLAN is created.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--temporary\fR\fR
 .ad
@@ -2603,7 +2413,6 @@ next reboot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -2616,7 +2425,6 @@ See "Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm delete-vlan\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR]
 \fIvlan-link\fR\fR
@@ -2628,7 +2436,6 @@ Delete the VLAN link specified.
 The \fBdelete-vlan\fRsubcommand accepts the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--temporary\fR\fR
 .ad
@@ -2640,7 +2447,6 @@ next reboot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -2653,7 +2459,6 @@ See "Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm show-vlan\fR [\fB-P\fR] [[\fB-p\fR] \fB-o\fR \fIfield\fR[,...]]
 [\fIvlan-link\fR]\fR
@@ -2665,7 +2470,6 @@ Display VLAN configuration for all VLAN links or for the specified VLAN link.
 The \fBshow-vlan\fRsubcommand accepts the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIfield\fR[,...], \fB--output\fR=\fIfield\fR[,...]\fR
 .ad
@@ -2676,7 +2480,6 @@ name must be one of the fields listed below, or the special value \fBall\fR, to
 display all fields. For each VLAN link, the following fields can be displayed:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLINK\fR\fR
 .ad
@@ -2687,7 +2490,6 @@ The name of the VLAN link.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBVID\fR\fR
 .ad
@@ -2698,7 +2500,6 @@ The ID associated with the VLAN.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBOVER\fR\fR
 .ad
@@ -2709,7 +2510,6 @@ The name of the physical link over which this VLAN is configured.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFLAGS\fR\fR
 .ad
@@ -2718,7 +2518,6 @@ The name of the physical link over which this VLAN is configured.
 A set of flags associated with the VLAN link. Possible flags are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBf\fR\fR
 .ad
@@ -2729,7 +2528,6 @@ The VLAN was created using the \fB-f\fR option to \fBcreate-vlan\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBi\fR\fR
 .ad
@@ -2747,7 +2545,6 @@ Additional flags might be defined in the future.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR, \fB--parseable\fR\fR
 .ad
@@ -2759,7 +2556,6 @@ required with \fB-p\fR. See "Parseable Output Format", below.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR, \fB--persistent\fR\fR
 .ad
@@ -2773,7 +2569,6 @@ system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm scan-wifi\fR [[\fB-p\fR] \fB-o\fR \fIfield\fR[,...]]
 [\fIwifi-link\fR]\fR
@@ -2786,7 +2581,6 @@ specified \fIwifi-link\fR.
 By default, currently all fields but \fBBSSTYPE\fR are displayed.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIfield\fR[,...], \fB--output\fR=\fIfield\fR[,...]\fR
 .ad
@@ -2798,7 +2592,6 @@ display all fields. For each \fBWiFi\fR network found, the following fields can
 be displayed:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLINK\fR\fR
 .ad
@@ -2809,7 +2602,6 @@ The name of the link the \fBWiFi\fR network is on.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBESSID\fR\fR
 .ad
@@ -2820,7 +2612,6 @@ The \fBESSID\fR (name) of the \fBWiFi\fR network.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBBSSID\fR\fR
 .ad
@@ -2833,7 +2624,6 @@ token (for \fBIBSS\fR networks).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSEC\fR\fR
 .ad
@@ -2846,7 +2636,6 @@ for a WiFi network that requires WPA (Wi-Fi Protected Access).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMODE\fR\fR
 .ad
@@ -2857,7 +2646,6 @@ The supported connection modes: one or more of \fBa\fR, \fBb\fR, or \fBg\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSTRENGTH\fR\fR
 .ad
@@ -2869,7 +2657,6 @@ The strength of the signal: one of \fBexcellent\fR, \fBvery good\fR,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSPEED\fR\fR
 .ad
@@ -2880,7 +2667,6 @@ The maximum speed of the \fBWiFi\fR network, in megabits per second.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBBSSTYPE\fR\fR
 .ad
@@ -2894,7 +2680,6 @@ Either \fBbss\fR for \fBBSS\fR (infrastructure) networks, or \fBibss\fR for
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR, \fB--parseable\fR\fR
 .ad
@@ -2908,7 +2693,6 @@ required with \fB-p\fR. See "Parseable Output Format", below.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm connect-wifi\fR [\fB-e\fR \fIessid\fR] [\fB-i\fR \fIbssid\fR]
 [\fB-k\fR \fIkey\fR,...] [\fB-s\fR \fBnone\fR | \fBwep\fR | \fBwpa\fR]
@@ -2936,7 +2720,6 @@ Once discovery is complete, the list of networks is filtered according to the
 value of the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIessid,\fR \fB--essid\fR=\fIessid\fR\fR
 .ad
@@ -2947,7 +2730,6 @@ Networks that do not have the same \fIessid\fR are filtered out.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR \fBbss\fR|\fBibss\fR, \fB--bsstype\fR=\fBbss\fR|\fBibss\fR\fR
 .ad
@@ -2958,7 +2740,6 @@ Networks that do not have the same \fBbsstype\fR are filtered out.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fBa\fR|\fBb\fR|\fBg\fR, \fB--mode\fR=\fBa\fR|\fBb\fR|\fBg\fR\fR
 .ad
@@ -2969,7 +2750,6 @@ Networks not appropriate for the specified 802.11 mode are filtered out.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR \fIkey,...\fR, \fB--key\fR=\fIkey, ...\fR\fR
 .ad
@@ -2981,7 +2761,6 @@ Networks not appropriate for the specified keys are filtered out.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fBnone\fR|\fBwep\fR|\fBwpa\fR,
 \fB--sec\fR=\fBnone\fR|\fBwep\fR|\fBwpa\fR\fR
@@ -2999,7 +2778,6 @@ In addition to the options described above, the following options also control
 the behavior of \fBconnect-wifi\fR:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fBopen\fR|\fBshared\fR, \fB--auth\fR=\fBopen\fR|\fBshared\fR\fR
 .ad
@@ -3011,7 +2789,6 @@ Connect using the specified authentication mode. By default, \fBopen\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR, \fB--create-ibss\fR\fR
 .ad
@@ -3024,7 +2801,6 @@ specified \fBESSID\fR cannot be found. If no \fBESSID\fR is specified, then
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fItime\fR, \fB--timeout\fR=\fItime\fR\fR
 .ad
@@ -3038,7 +2814,6 @@ shorter than the default might not succeed reliably.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR \fIkey,...\fR, \fB--key\fR=\fIkey,...\fR\fR
 .ad
@@ -3060,7 +2835,6 @@ first key being the active key.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm disconnect-wifi\fR [\fB-a\fR] [\fIwifi-link\fR]\fR
 .ad
@@ -3072,7 +2846,6 @@ convenience, if only one \fBWiFi\fR link is connected, \fIwifi-link\fR can be
 omitted.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR, \fB--all-links\fR\fR
 .ad
@@ -3086,7 +2859,6 @@ scripts.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm show-wifi\fR [[\fB-p\fR] \fB-o\fR \fIfield\fR,...]
 [\fIwifi-link\fR]\fR
@@ -3097,7 +2869,6 @@ Shows \fBWiFi\fR configuration information either for all \fBWiFi\fR links or
 for the specified link \fIwifi-link\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIfield,...\fR, \fB--output\fR=\fIfield\fR\fR
 .ad
@@ -3109,7 +2880,6 @@ display all fields. For each \fBWiFi\fR link, the following fields can be
 displayed:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLINK\fR\fR
 .ad
@@ -3120,7 +2890,6 @@ The name of the link being displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSTATUS\fR\fR
 .ad
@@ -3133,7 +2902,6 @@ not connected. If the link is disconnected, all remaining fields have the value
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBESSID\fR\fR
 .ad
@@ -3144,7 +2912,6 @@ The \fBESSID\fR (name) of the connected \fBWiFi\fR network.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBBSSID\fR\fR
 .ad
@@ -3157,7 +2924,6 @@ token (for \fBIBSS\fR networks).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSEC\fR\fR
 .ad
@@ -3170,7 +2936,6 @@ requires WPA.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMODE\fR\fR
 .ad
@@ -3181,7 +2946,6 @@ The supported connection modes: one or more of \fBa\fR, \fBb\fR, or \fBg\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSTRENGTH\fR\fR
 .ad
@@ -3193,7 +2957,6 @@ The connection strength: one of \fBexcellent\fR, \fBvery good\fR, \fBgood\fR,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSPEED\fR\fR
 .ad
@@ -3204,7 +2967,6 @@ The connection speed, in megabits per second.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBAUTH\fR\fR
 .ad
@@ -3215,7 +2977,6 @@ Either \fBopen\fR or \fBshared\fR (see \fBconnect-wifi\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBBSSTYPE\fR\fR
 .ad
@@ -3231,7 +2992,6 @@ displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR, \fB--parseable\fR\fR
 .ad
@@ -3245,7 +3005,6 @@ required with \fB-p\fR. See "Parseable Output Format", below.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm show-ether\fR [\fB-x\fR] [[\fB-p\fR] \fB-o\fR \fIfield\fR,...]
 [\fIether-link\fR]\fR
@@ -3258,7 +3017,6 @@ specified physical Ethernet link.
 The \fBshow-ether\fR subcommand accepts the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIfield\fR,..., \fB--output\fR=\fIfield\fR\fR
 .ad
@@ -3269,7 +3027,6 @@ name must be one of the fields listed below, or the special value \fBall\fR to
 display all fields. For each link, the following fields can be displayed:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLINK\fR\fR
 .ad
@@ -3280,7 +3037,6 @@ The name of the link being displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPTYPE\fR\fR
 .ad
@@ -3294,7 +3050,6 @@ capabilities advertised by the link-partner.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSTATE\fR\fR
 .ad
@@ -3305,7 +3060,6 @@ The state of the link.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBAUTO\fR\fR
 .ad
@@ -3316,7 +3070,6 @@ A \fByes\fR/\fBno\fR value indicating whether auto-negotiation is advertised.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSPEED-DUPLEX\fR\fR
 .ad
@@ -3329,7 +3082,6 @@ Duplex values are encoded as \fBf\fR (full-duplex) or \fBh\fR (half-duplex).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPAUSE\fR\fR
 .ad
@@ -3344,7 +3096,6 @@ bi-directional flow-control.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBREM_FAULT\fR\fR
 .ad
@@ -3359,7 +3110,6 @@ By default, all fields except \fBREM_FAULT\fR are displayed for the "current"
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR, \fB--parseable\fR\fR
 .ad
@@ -3371,7 +3121,6 @@ required with \fB-p\fR. See "Parseable Output Format", below.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR, \fB--extended\fR\fR
 .ad
@@ -3385,7 +3134,6 @@ Extended output is displayed for \fBPTYPE\fR values of \fBcurrent\fR,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm set-linkprop\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] \fB-p\fR
 \fIprop\fR=\fIvalue\fR[,...] \fIlink\fR\fR
@@ -3398,7 +3146,6 @@ device driver, and networking hardware. These properties can be retrieved using
 \fBshow-linkprop\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--temporary\fR\fR
 .ad
@@ -3410,7 +3157,6 @@ reboot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -3421,7 +3167,6 @@ See "Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIprop\fR=\fIvalue\fR[,...], \fB--prop\fR
 \fIprop\fR=\fIvalue\fR[,...]\fR
@@ -3441,7 +3186,6 @@ same value.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm reset-linkprop\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] [\fB-p\fR
 \fIprop\fR,...] \fIlink\fR\fR
@@ -3454,7 +3198,6 @@ all properties are reset. See \fBshow-linkprop\fR for a description of
 properties.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--temporary\fR\fR
 .ad
@@ -3466,7 +3209,6 @@ Temporary resets last until the next reboot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -3477,7 +3219,6 @@ See "Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIprop, ...\fR, \fB--prop\fR=\fIprop, ...\fR\fR
 .ad
@@ -3492,7 +3233,6 @@ the same value.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm show-linkprop\fR [\fB-P\fR] [[\fB-c\fR] \fB-o\fR
 \fIfield\fR[,...]][\fB-p\fR \fIprop\fR[,...]] [\fIlink\fR]\fR
@@ -3505,7 +3245,6 @@ no properties are specified, all available link properties are displayed. For
 each property, the following fields are displayed:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIfield\fR[,...], \fB--output\fR=\fIfield\fR\fR
 .ad
@@ -3516,7 +3255,6 @@ name must be one of the fields listed below, or the special value \fBall\fR to
 display all fields. For each link, the following fields can be displayed:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLINK\fR\fR
 .ad
@@ -3527,7 +3265,6 @@ The name of the datalink.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPROPERTY\fR\fR
 .ad
@@ -3538,7 +3275,6 @@ The name of the property.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPERM\fR\fR
 .ad
@@ -3550,7 +3286,6 @@ or \fBrw\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBVALUE\fR\fR
 .ad
@@ -3564,7 +3299,6 @@ use the system \fBDEFAULT\fR value (if any).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDEFAULT\fR\fR
 .ad
@@ -3576,7 +3310,6 @@ The default value of the property. If the property has no default value,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPOSSIBLE\fR\fR
 .ad
@@ -3598,7 +3331,6 @@ driver man page for details.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR, \fB--parseable\fR\fR
 .ad
@@ -3610,7 +3342,6 @@ required with this option. See "Parseable Output Format", below.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR, \fB--persistent\fR\fR
 .ad
@@ -3621,7 +3352,6 @@ Display persistent link property information
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIprop, ...\fR, \fB--prop\fR=\fIprop, ...\fR\fR
 .ad
@@ -3635,7 +3365,6 @@ properties following subcommand descriptions.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm create-secobj\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] [\fB-f\fR
 \fIfile\fR] \fB-c\fR \fIclass\fR \fIsecobj\fR\fR
@@ -3660,7 +3389,6 @@ This subcommand is only usable by users or roles that belong to the "Network
 Link Security" \fBRBAC\fR profile.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIclass\fR, \fB--class\fR=\fIclass\fR\fR
 .ad
@@ -3671,7 +3399,6 @@ Link Security" \fBRBAC\fR profile.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--temporary\fR\fR
 .ad
@@ -3683,7 +3410,6 @@ next reboot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -3694,7 +3420,6 @@ See "Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfile\fR, \fB--file\fR=\fIfile\fR\fR
 .ad
@@ -3709,7 +3434,6 @@ section for an example of using this option to set a \fBWEP\fR key.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm delete-secobj\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR]
 \fIsecobj\fR[,...]\fR
@@ -3720,7 +3444,6 @@ Delete one or more specified secure objects. This subcommand is only usable by
 users or roles that belong to the "Network Link Security" \fBRBAC\fR profile.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--temporary\fR\fR
 .ad
@@ -3732,7 +3455,6 @@ next reboot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -3745,7 +3467,6 @@ See "Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm show-secobj\fR [\fB-P\fR] [[\fB-p\fR] \fB-o\fR \fIfield\fR[,...]]
 [\fIsecobj\fR,...]\fR
@@ -3763,7 +3484,6 @@ temporarily created.
 For security reasons, it is not possible to show the value of a secure object.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIfield\fR[,...] , \fB--output\fR=\fIfield\fR[,...]\fR
 .ad
@@ -3774,7 +3494,6 @@ name must be one of the fields listed below. For displayed secure object, the
 following fields can be shown:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBOBJECT\fR\fR
 .ad
@@ -3785,7 +3504,6 @@ The name of the secure object.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCLASS\fR\fR
 .ad
@@ -3798,7 +3516,6 @@ The class of the secure object.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR, \fB--parseable\fR\fR
 .ad
@@ -3810,7 +3527,6 @@ required with \fB-p\fR. See "Parseable Output Format", below.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR, \fB--persistent\fR\fR
 .ad
@@ -3823,7 +3539,6 @@ Display persistent secure object information
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm create-vnic\fR [\fB-t\fR] \fB-l\fR \fIlink\fR [\fB-R\fR
 \fIroot-dir\fR] [\fB-m\fR \fIvalue\fR | auto | {factory [\fB-n\fR
@@ -3835,7 +3550,6 @@ Display persistent secure object information
 Create a VNIC with name \fIvnic-link\fR over the specified link.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--temporary\fR\fR
 .ad
@@ -3847,7 +3561,6 @@ reboot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -3858,7 +3571,6 @@ See "Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlink\fR, \fB--link\fR=\fIlink\fR\fR
 .ad
@@ -3869,7 +3581,6 @@ See "Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fIvalue\fR | \fIkeyword\fR, \fB--mac-address\fR=\fIvalue\fR |
 \fIkeyword\fR\fR
@@ -3882,7 +3593,6 @@ must be valid for the underlying NIC. The following special keywords can be
 used:
 .sp
 .ne 2
-.mk
 .na
 \fBfactory [\fB-n\fR \fIslot-identifier\fR],\fR
 .ad
@@ -3902,7 +3612,6 @@ addresses, their slot identifiers, and their availability.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fR
 .ad
@@ -3923,7 +3632,6 @@ with the \fB-r\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fBauto\fR
 .ad
@@ -3936,7 +3644,6 @@ specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR \fIvlan-id\fR\fR
 .ad
@@ -3949,7 +3656,6 @@ Enable VLAN tagging for this VNIC. The VLAN tag will have id \fIvlan-id\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIprop\fR=\fIvalue\fR,..., \fB--prop\fR
 \fIprop\fR=\fIvalue\fR,...\fR
@@ -3963,7 +3669,6 @@ A comma-separated list of properties to set to the specified values.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm delete-vnic\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR]
 \fIvnic-link\fR\fR
@@ -3973,7 +3678,6 @@ A comma-separated list of properties to set to the specified values.
 Deletes the specified VNIC.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--temporary\fR\fR
 .ad
@@ -3985,7 +3689,6 @@ next reboot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -3998,7 +3701,6 @@ See "Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm show-vnic\fR [\fB-pP\fR] [\fB-s\fR [\fB-i\fR \fIinterval\fR]]
 [\fB-o\fR \fIfield\fR[,...]] [\fB-l\fR \fIlink\fR] [\fIvnic-link\fR]\fR
@@ -4009,7 +3711,6 @@ Show VNIC configuration information (the default) or statistics, for all VNICs,
 all VNICs on a link, or only the specified \fIvnic-link\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIfield\fR[,...] , \fB--output\fR=\fIfield\fR[,...]\fR
 .ad
@@ -4021,7 +3722,6 @@ fields listed below, or the special value \fBall\fR to display all fields. By
 default (without \fB-o\fR), \fBshow-vnic\fR displays all fields.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLINK\fR\fR
 .ad
@@ -4032,7 +3732,6 @@ The name of the VNIC.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBOVER\fR\fR
 .ad
@@ -4043,7 +3742,6 @@ The name of the physical link over which this VNIC is configured.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSPEED\fR\fR
 .ad
@@ -4054,7 +3752,6 @@ The maximum speed of the VNIC, in megabits per second.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMACADDRESS\fR\fR
 .ad
@@ -4065,7 +3762,6 @@ MAC address of the VNIC.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMACADDRTYPE\fR\fR
 .ad
@@ -4075,7 +3771,6 @@ MAC address type of the VNIC. \fBdladm\fR distinguishes among the following MAC
 address types:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrandom\fR\fR
 .ad
@@ -4086,7 +3781,6 @@ A random address assigned to the VNIC.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfactory\fR\fR
 .ad
@@ -4101,7 +3795,6 @@ A factory MAC address used by the VNIC.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR, \fB--parseable\fR\fR
 .ad
@@ -4113,7 +3806,6 @@ required with \fB-p\fR. See "Parseable Output Format", below.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR, \fB--persistent\fR\fR
 .ad
@@ -4124,7 +3816,6 @@ Display the persistent VNIC configuration.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR, \fB--statistics\fR\fR
 .ad
@@ -4135,7 +3826,6 @@ Displays VNIC statistics.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIinterval\fR, \fB--interval\fR=\fIinterval\fR\fR
 .ad
@@ -4148,7 +3838,6 @@ will be displayed only once.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlink\fR, \fB--link\fR=\fIlink\fR\fR
 .ad
@@ -4161,7 +3850,6 @@ Display information for all VNICs on the named link.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fR
 .ad
@@ -4175,7 +3863,6 @@ Display information for all VNICs on the named link.
 Create an etherstub with the specified name.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--temporary\fR\fR
 .ad
@@ -4187,7 +3874,6 @@ across reboots.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -4203,7 +3889,6 @@ switch between the VNICs created on top of the same etherstub.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fR
 .ad
@@ -4217,7 +3902,6 @@ switch between the VNICs created on top of the same etherstub.
 Delete the specified etherstub.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--temporary\fR\fR
 .ad
@@ -4229,7 +3913,6 @@ next reboot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -4242,7 +3925,6 @@ See "Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm show-etherstub\fR [\fIetherstub\fR]\fR
 .ad
@@ -4254,7 +3936,6 @@ Show all configured etherstubs by default, or the specified etherstub if
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm create-iptun\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] \fB-T\fR
 \fItype\fR [\fB-s\fR \fItsrc\fR] [\fB-d\fR \fItdst\fR] \fIiptun-link\fR\fR
@@ -4271,7 +3952,6 @@ subcommand creates a virtual link. The \fBifconfig\fR(1M) command is used to
 configure IP interfaces above the link.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--temporary\fR\fR
 .ad
@@ -4283,7 +3963,6 @@ the next reboot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -4294,7 +3973,6 @@ See "Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fItype\fR, \fB--tunnel-type\fR=\fItype\fR\fR
 .ad
@@ -4304,7 +3982,6 @@ Specifies the type of tunnel to be created. The type must be one of the
 following:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipv4\fR\fR
 .ad
@@ -4318,7 +3995,6 @@ IPv6-over-IPv4 tunneling configurations.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipv6\fR\fR
 .ad
@@ -4332,7 +4008,6 @@ IPv4-over-IPv6 and IPv6-over-IPv6 tunneling configurations.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB6to4\fR\fR
 .ad
@@ -4347,7 +4022,6 @@ plumbed on such a tunnel link to configure a 6to4 router.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fItsrc\fR, \fB--tunnel-src\fR=\fItsrc\fR\fR
 .ad
@@ -4362,7 +4036,6 @@ important that any hostname used be included in \fB/etc/hosts\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fItdst\fR, \fB--tunnel-dst\fR=\fItdst\fR\fR
 .ad
@@ -4375,7 +4048,6 @@ Literal IP address or hostname corresponding to the tunnel destination.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm modify-iptun\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] [\fB-s\fR
 \fItsrc\fR] [\fB-d\fR \fItdst\fR] \fIiptun-link\fR\fR
@@ -4385,7 +4057,6 @@ Literal IP address or hostname corresponding to the tunnel destination.
 Modify the parameters of the specified IP tunnel.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--temporary\fR\fR
 .ad
@@ -4397,7 +4068,6 @@ until the next reboot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -4408,7 +4078,6 @@ See "Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fItsrc\fR, \fB--tunnel-src\fR=\fItsrc\fR\fR
 .ad
@@ -4420,7 +4089,6 @@ description.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fItdst\fR, \fB--tunnel-dst\fR=\fItdst\fR\fR
 .ad
@@ -4434,7 +4102,6 @@ description.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm delete-iptun\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR]
 \fIiptun-link\fR\fR
@@ -4444,7 +4111,6 @@ description.
 Delete the specified IP tunnel link.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--temporary\fR\fR
 .ad
@@ -4456,7 +4122,6 @@ next reboot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -4469,7 +4134,6 @@ See "Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm show-iptun\fR [\fB-P\fR] [[\fB-p\fR] \fB-o\fR \fIfield\fR[,...]]
 [\fIiptun-link\fR]\fR
@@ -4479,7 +4143,6 @@ See "Options," above.
 Show IP tunnel link configuration for a single IP tunnel or all IP tunnels.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR, \fB--persistent\fR\fR
 .ad
@@ -4490,7 +4153,6 @@ Display the persistent IP tunnel configuration.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR, \fB--parseable\fR\fR
 .ad
@@ -4502,7 +4164,6 @@ Display using a stable machine-parseable format. The -o option is required with
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIfield\fR[,...], \fB--output\fR=\fIfield\fR[,...]\fR
 .ad
@@ -4514,7 +4175,6 @@ display all fields. By default (without \fB-o\fR), \fBshow-iptun\fR displays
 all fields.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLINK\fR\fR
 .ad
@@ -4525,7 +4185,6 @@ The name of the IP tunnel link.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTYPE\fR\fR
 .ad
@@ -4536,7 +4195,6 @@ Type of tunnel as specified by the \fB-T\fR option of \fBcreate-iptun\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFLAGS\fR\fR
 .ad
@@ -4545,7 +4203,6 @@ Type of tunnel as specified by the \fB-T\fR option of \fBcreate-iptun\fR.
 A set of flags associated with the IP tunnel link. Possible flags are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBs\fR\fR
 .ad
@@ -4566,7 +4223,6 @@ See \fBipsecconf\fR(1M) for more details on how to configure IPsec policy.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBi\fR\fR
 .ad
@@ -4582,7 +4238,6 @@ on implicit tunnel creation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSOURCE\fR\fR
 .ad
@@ -4593,7 +4248,6 @@ The tunnel source address.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDESTINATION\fR\fR
 .ad
@@ -4608,7 +4262,6 @@ The tunnel destination address.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdladm show-usage\fR [\fB-a\fR] \fB-f\fR \fIfilename\fR [\fB-p\fR
 \fIplotfile\fR \fB-F\fR \fIformat\fR] [\fB-s\fR \fItime\fR] [\fB-e\fR
@@ -4622,7 +4275,6 @@ required. The default output will be the summary of network usage for the
 entire period of time in which extended accounting was enabled.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -4635,7 +4287,6 @@ the links that have already been deleted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfilename\fR, \fB--file\fR=\fIfilename\fR\fR
 .ad
@@ -4646,7 +4297,6 @@ Read extended accounting records of network usage from \fIfilename\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fIformat\fR, \fB--format\fR=\fIformat\fR\fR
 .ad
@@ -4658,7 +4308,6 @@ option. As of this release, \fBgnuplot\fR is the only supported format.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIplotfile\fR, \fB--plot\fR=\fIplotfile\fR\fR
 .ad
@@ -4670,7 +4319,6 @@ option, which is required.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fItime\fR, \fB--start\fR=\fItime\fR\fR
 .ad
@@ -4686,7 +4334,6 @@ Start and stop times for data display. Time is in the format
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIlink\fR\fR
 .ad
@@ -4721,7 +4368,6 @@ you request only a single field.
 The following general link properties are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBautopush\fR\fR
 .ad
@@ -4741,7 +4387,6 @@ The \fBautopush\fR property is preferred over the more general
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcpus\fR\fR
 .ad
@@ -4770,7 +4415,6 @@ is not bound to any specific processor or processor set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlearn_limit\fR\fR
 .ad
@@ -4785,7 +4429,6 @@ The default value is \fB1000\fR. Valid values are greater or equal to 0.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlearn_decay\fR\fR
 .ad
@@ -4800,7 +4443,6 @@ The default value is \fB200\fR. Valid values are greater or equal to 0.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmaxbw\fR\fR
 .ad
@@ -4814,7 +4456,6 @@ Mbps. The default is no bandwidth limit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpriority\fR\fR
 .ad
@@ -4826,7 +4467,6 @@ tokens \fBhigh\fR, \fBmedium\fR, or \fBlow\fR. The default is \fBhigh\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstp\fR\fR
 .ad
@@ -4841,7 +4481,6 @@ property. The default value is \fB1\fR, to enable STP.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBforward\fR\fR
 .ad
@@ -4855,7 +4494,6 @@ to enable bridge forwarding for configured VLANs.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdefault_tag\fR\fR
 .ad
@@ -4870,7 +4508,6 @@ values values are from 0 to 4094.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstp_priority\fR\fR
 .ad
@@ -4883,7 +4520,6 @@ The default value is \fB128\fR. Valid values range from 0 to 255.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstp_cost\fR\fR
 .ad
@@ -4897,7 +4533,6 @@ for 100Mbps, \fB4\fR for 1Gbps, and \fB2\fR for 10Gbps. Valid values range from
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstp_edge\fR\fR
 .ad
@@ -4911,7 +4546,6 @@ ports automatically.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstp_p2p\fR\fR
 .ad
@@ -4926,7 +4560,6 @@ normal multipoint mode. The default value is \fBauto\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstp_mcheck\fR\fR
 .ad
@@ -4959,7 +4592,6 @@ The default value is 0.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzone\fR\fR
 .ad
@@ -4980,7 +4612,6 @@ The following \fBWiFi\fR link properties are supported. Note that the ability
 to set a given property to a given value depends on the driver and hardware.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBchannel\fR\fR
 .ad
@@ -4993,7 +4624,6 @@ of values varies by regulatory domain.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpowermode\fR\fR
 .ad
@@ -5006,7 +4636,6 @@ Specifies the power management mode of the \fBWiFi\fR link. Possible values are
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBradio\fR\fR
 .ad
@@ -5018,7 +4647,6 @@ or \fBoff\fR. Default is \fBon\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBspeed\fR\fR
 .ad
@@ -5117,7 +4745,6 @@ autonegotiation itself, and therefore cannot be impacted by Power Management.
 In addition, the following Ethernet properties are reported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBspeed\fR\fR
 .ad
@@ -5128,7 +4755,6 @@ In addition, the following Ethernet properties are reported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmtu\fR\fR
 .ad
@@ -5140,7 +4766,6 @@ The maximum client SDU (Send Data Unit) supported by the device. Valid range is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBflowctrl\fR\fR
 .ad
@@ -5150,7 +4775,6 @@ Establishes flow-control modes that will be advertised by the device. Valid
 input is one of:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBno\fR\fR
 .ad
@@ -5161,7 +4785,6 @@ No flow control enabled.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrx\fR\fR
 .ad
@@ -5172,7 +4795,6 @@ Receive, and act upon incoming pause frames.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtx\fR\fR
 .ad
@@ -5184,7 +4806,6 @@ pause frames.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbi\fR\fR
 .ad
@@ -5199,7 +4820,6 @@ capabilities allowed by the device and the link partner.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtagmode\fR\fR
 .ad
@@ -5210,12 +4830,10 @@ inserted in packets being transmitted on the link. Two mode values can be
 assigned to this property:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnormal\fR\fR
 .ad
 .RS 12n
-.rt  
 Insert a VLAN tag in outgoing packets under the following conditions:
 .RS +4
 .TP
@@ -5233,12 +4851,10 @@ The user requested priority tagging.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvlanonly\fR\fR
 .ad
 .RS 12n
-.rt  
 Insert a VLAN tag only when the outgoing packet belongs to a VLAN. If a tag is
 being inserted in this mode and the user has also requested a non-zero
 priority, the priority is honored and included in the VLAN tag.
@@ -5253,7 +4869,6 @@ The default value is \fBvlanonly\fR.
 The following IP tunnel link properties are supported.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhoplimit\fR\fR
 .ad
@@ -5266,7 +4881,6 @@ is 64.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBencaplimit\fR\fR
 .ad
@@ -5763,13 +5377,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .sp
@@ -5779,13 +5392,12 @@ Interface StabilityCommitted
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/dlmgmtd.1m b/usr/src/man/man1m/dlmgmtd.1m
index 203d882c2a..e32e95b82c 100644
--- a/usr/src/man/man1m/dlmgmtd.1m
+++ b/usr/src/man/man1m/dlmgmtd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH dlmgmtd 1M "30 Jul 2008" "SunOS 5.11" "System Administration Commands"
+.TH DLMGMTD 1M "Jul 30, 2008"
 .SH NAME
 dlmgmtd \- datalink management daemon
 .SH SYNOPSIS
@@ -48,13 +48,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityPrivate
+Interface Stability	Private
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/dmesg.1m b/usr/src/man/man1m/dmesg.1m
index 0df737796d..37f76065e7 100644
--- a/usr/src/man/man1m/dmesg.1m
+++ b/usr/src/man/man1m/dmesg.1m
@@ -1,18 +1,18 @@
 '\" te
 .\"  Copyright (c) 1980 Regents of the University of California. All rights reserved. The Berkeley software License Agreement specifies the terms and conditions for redistribution.
 .\" Copyright (c) 1999 Sun Microsystems, Inc. All Rights Reserved.
-.TH dmesg 1M "9 Jul 2003" "SunOS 5.11" "System Administration Commands"
+.TH DMESG 1M "Jul 9, 2003"
 .SH NAME
 dmesg \- collect system diagnostic messages to form error log
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/bin/dmesg\fR 
+\fB/usr/bin/dmesg\fR
 .fi
 
 .LP
 .nf
-\fB/usr/sbin/dmesg\fR 
+\fB/usr/sbin/dmesg\fR
 .fi
 
 .SH DESCRIPTION
diff --git a/usr/src/man/man1m/dminfo.1m b/usr/src/man/man1m/dminfo.1m
index 148b7a0ed7..9f41379440 100644
--- a/usr/src/man/man1m/dminfo.1m
+++ b/usr/src/man/man1m/dminfo.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH dminfo 1M "16 Apr 2008" "SunOS 5.11" "System Administration Commands"
+.TH DMINFO 1M "Apr 16, 2008"
 .SH NAME
 dminfo \- report information about a device entry in a device maps file
 .SH SYNOPSIS
@@ -43,24 +43,20 @@ file.
 The following options are supported
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 18n
-.rt  
 Succeed if any of the requested entries are found. If used with \fB-v\fR, all
 entries that match the requested case(s) are printed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdev\(mipath\fR\fR
 .ad
 .RS 18n
-.rt  
 Search by \fIdev\(mipath\fR. Search \fBdevice_maps\fR(4) for a device special
 pathname in the \fIdevice_list\fR field matching the \fIdev\(mipath\fR
 argument. This option cannot be used with \fB-n\fR, \fB-t\fR or \fB-u\fR.
@@ -68,24 +64,20 @@ argument. This option cannot be used with \fB-n\fR, \fB-t\fR or \fB-u\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIpathname\fR\fR
 .ad
 .RS 18n
-.rt  
 Use a device_maps file with \fIpathname\fR instead of
 \fB/etc/security/device_maps\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fIdev\(miname\fR\fR
 .ad
 .RS 18n
-.rt  
 Search by \fIdev\(miname\fR. Search \fBdevice_maps\fR(4) for a
 \fIdevice_name\fR field matching \fIdev\(miname\fR. This option cannot be used
 with \fB-d\fR, \fB-t\fR or \fB-u\fR.
@@ -93,12 +85,10 @@ with \fB-d\fR, \fB-t\fR or \fB-u\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fIdev\(mitype\fR\fR
 .ad
 .RS 18n
-.rt  
 Search by \fIdev\(mitype\fR. Search \fBdevice_maps\fR(4) for a
 \fIdevice_type\fR field matching the given \fIdev\(mitype\fR. This option
 cannot be used with \fB-d\fR, \fB-n\fR or \fB-u\fR.
@@ -106,12 +96,10 @@ cannot be used with \fB-d\fR, \fB-n\fR or \fB-u\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIdm\(mientry\fR\fR
 .ad
 .RS 18n
-.rt  
 Update the \fBdevice_maps\fR(4) file. This option is provided to add entries to
 the \fBdevice_maps\fR(4) file. The \fIdm\(mientry\fR must be a complete
 \fBdevice_maps\fR(4) file entry. The \fIdm\(mientry\fR has fields, as in the
@@ -123,12 +111,10 @@ duplicate. The default device maps file can be updated only by the super user.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 18n
-.rt  
 Verbose. Print the requested entry or entries, one line per entry, on the
 standard output. If no entries are specified, all are printed.
 .RE
@@ -136,34 +122,28 @@ standard output. If no entries are specified, all are printed.
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB0\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB1\fR
 .ad
 .RS 5n
-.rt  
 Request failed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB2\fR
 .ad
 .RS 5n
-.rt  
 Incorrect syntax.
 .RE
 
diff --git a/usr/src/man/man1m/dns-sd.1m b/usr/src/man/man1m/dns-sd.1m
index f6b6c709ba..aeabdcc840 100644
--- a/usr/src/man/man1m/dns-sd.1m
+++ b/usr/src/man/man1m/dns-sd.1m
@@ -1,9 +1,9 @@
 '\" te
-.\" Copyright (c) 2003-2004 Apple Computer, Inc. All Rights Reserved. 
+.\" Copyright (c) 2003-2004 Apple Computer, Inc. All Rights Reserved.
 .\" Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing,
 .\" software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
 .\" Portions Copyright (c) 2007, Sun Microsystems, Inc. All Rights Reserved.
-.TH dns-sd 1M "21 Aug 2007" "SunOS 5.11" "System Administration Commands"
+.TH DNS-SD 1M "Aug 21, 2007"
 .SH NAME
 dns-sd \- Multicast DNS (mDNS) & DNS Service Discovery (DNS-SD) Test Tool
 .SH SYNOPSIS
@@ -66,7 +66,6 @@ as they happen.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIname\fR \fItype\fR \fIdomain\fR \fIport\fR
 [\fIkey\fR=\fIvalue\fR ...]\fR
@@ -104,7 +103,6 @@ registration at http://www.dns-sd.org/ServiceTypes.html
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-B\fR \fItype\fR \fIdomain\fR\fR
 .ad
@@ -118,7 +116,6 @@ domain name or using "." means "pick a sensible default."
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR \fIname\fR \fItype\fR \fIdomain\fR\fR
 .ad
@@ -138,7 +135,6 @@ address and port number every time the user presses Cmd-P to print.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Q\fR \fIFQDN\fR \fIrrtype\fR \fIrrclass\fR\fR
 .ad
@@ -149,7 +145,6 @@ Generic query for any resource record type and class.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR \fIFQDN\fR \fIrrtype\fR \fIrrclass\fR\fR
 .ad
@@ -164,7 +159,6 @@ other \fBmdnsd\fR(1M) caches on the network.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIname\fR \fItype\fR \fIdomain\fR \fIport\fR \fIhost\fR \fIIP\fR
 [\fIkey\fR=\fIvalue\fR ...]\fR
@@ -180,7 +174,6 @@ service must be specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-E\fR\fR
 .ad
@@ -193,7 +186,6 @@ returned by querying the name servers in \fBresolv.conf\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fR
 .ad
@@ -206,7 +198,6 @@ querying the name servers in \fBresolv.conf\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR\fR
 .ad
@@ -218,7 +209,6 @@ delete operations of \fBDNS\fR records with Multicast \fBDNS\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-U\fR\fR
 .ad
@@ -230,7 +220,6 @@ Test registering service with Multicast \fBDNS\fR and test updating of
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-N\fR\fR
 .ad
@@ -242,7 +231,6 @@ Test adding a large \fBNULL\fR record for a service registered with Multicast
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR\fR
 .ad
@@ -254,7 +242,6 @@ Test adding a large \fBTXT\fR record for a service registered with Multicast
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR\fR
 .ad
@@ -265,7 +252,6 @@ Test creating a registration with multiple \fBTXT\fR records.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR\fR
 .ad
@@ -334,13 +320,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityVolatile
+Interface Stability	Volatile
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/domainname.1m b/usr/src/man/man1m/domainname.1m
index 35080451d2..7ef3ee4bc1 100644
--- a/usr/src/man/man1m/domainname.1m
+++ b/usr/src/man/man1m/domainname.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH domainname 1M "8 Mar 2006" "SunOS 5.11" "System Administration Commands"
+.TH DOMAINNAME 1M "Mar 8, 2006"
 .SH NAME
 domainname \- set or display name of the current domain
 .SH SYNOPSIS
@@ -71,23 +71,19 @@ guidance as to appropriate corrective action.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/defaultdomain\fR\fR
 .ad
 .RS 22n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/nsswitch.conf\fR\fR
 .ad
 .RS 22n
-.rt  
 
 .RE
 
diff --git a/usr/src/man/man1m/drd.1m b/usr/src/man/man1m/drd.1m
index bee498958b..96b8bedb32 100644
--- a/usr/src/man/man1m/drd.1m
+++ b/usr/src/man/man1m/drd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH drd 1M "10 Jul 2006" "SunOS 5.11" "System Administration Commands"
+.TH DRD 1M "Jul 10, 2006"
 .SH NAME
 drd \- Logical Domain Dynamic Reconfiguration daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/ldoms/drd\fR 
+\fB/usr/lib/ldoms/drd\fR
 .fi
 
 .SH DESCRIPTION
@@ -31,13 +31,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUnstable
+Interface Stability	Unstable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/drvconfig.1m b/usr/src/man/man1m/drvconfig.1m
index 07ab4e571a..aafa6948b8 100644
--- a/usr/src/man/man1m/drvconfig.1m
+++ b/usr/src/man/man1m/drvconfig.1m
@@ -4,13 +4,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH drvconfig 1M "9 Aug 2004" "SunOS 5.11" "System Administration Commands"
+.TH DRVCONFIG 1M "Aug 9, 2004"
 .SH NAME
 drvconfig \- apply permission and ownership changes to devices
 .SH SYNOPSIS
 .LP
 .nf
-\fBdrvconfig\fR [\fB-bn\fR] [\fB-a\fR \fIalias_name\fR] [\fB-c\fR \fIclass_name\fR] 
+\fBdrvconfig\fR [\fB-bn\fR] [\fB-a\fR \fIalias_name\fR] [\fB-c\fR \fIclass_name\fR]
      [\fB-i\fR \fIdrivername\fR] [\fB-m\fR \fImajor_num\fR] [\fB-r\fR \fIroot_dir\fR]
 .fi
 
@@ -31,12 +31,10 @@ rebooted.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fIalias_name\fR\fR
 .ad
 .RS 16n
-.rt  
 Add the name \fIalias_name\fR to the list of aliases that this driver is known
 by. This option, if used, must be used with the \fB-m\fR \fImajor_num\fR, the
 \fB-b\fR and the \fB-i\fR \fIdrivername\fR options.
@@ -44,12 +42,10 @@ by. This option, if used, must be used with the \fB-m\fR \fImajor_num\fR, the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR\fR
 .ad
 .RS 16n
-.rt  
 Add a new major number to name binding into the kernel's internal
 \fBname_to_major\fR tables. This option is not normally used directly, but is
 used by other utilities such as \fBadd_drv\fR(1M). Use of the \fB-b\fR option
@@ -59,12 +55,10 @@ created.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fIclass_name\fR\fR
 .ad
 .RS 16n
-.rt  
 The driver being added to the system exports the class \fIclass_name\fR. This
 option is not normally used directly, but is used by other utilities. It is
 only effective when used with the \fB-b\fR option.
@@ -72,12 +66,10 @@ only effective when used with the \fB-b\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fIdrivername\fR\fR
 .ad
 .RS 16n
-.rt  
 Only configure the devices for the named driver. The following options are used
 by the implementation of \fBadd_drv\fR(1M) and \fBrem_drv\fR(1M), and may not
 be supported in future versions of Solaris:
@@ -85,104 +77,86 @@ be supported in future versions of Solaris:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fImajor_num\fR\fR
 .ad
 .RS 16n
-.rt  
 Specify the major number \fImajor_num\fR for this driver to add to the kernel's
 \fBname_to_major\fR binding tables.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 16n
-.rt  
 Do not try to load and attach any drivers, or if the \fB-i\fR option is given,
 do not try to attach the driver named \fIdrivername\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fIroot_dir\fR\fR
 .ad
 .RS 16n
-.rt  
 Perform operations under \fIroot_dir\fR, rather than directly under \fBroot\fR.
 .RE
 
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-zero\fR
 .ad
 .RS 12n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/devices\fR\fR
 .ad
 .RS 23n
-.rt  
 Device nodes directory
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/minor_perm\fR\fR
 .ad
 .RS 23n
-.rt  
 Minor mode permissions
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/name_to_major\fR\fR
 .ad
 .RS 23n
-.rt  
 Major number binding
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/driver_classes\fR\fR
 .ad
 .RS 23n
-.rt  
 Driver class binding file
 .RE
 
diff --git a/usr/src/man/man1m/dsbitmap.1m b/usr/src/man/man1m/dsbitmap.1m
index a0d8a51055..eac1e0d6a7 100644
--- a/usr/src/man/man1m/dsbitmap.1m
+++ b/usr/src/man/man1m/dsbitmap.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH dsbitmap 1M "2 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH DSBITMAP 1M "Oct 2, 2007"
 .SH NAME
 dsbitmap \- size Availability Suite bitmap volumes
 .SH SYNOPSIS
@@ -33,7 +33,6 @@ volume required for use with the specified data volume.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -44,7 +43,6 @@ Prints the usage message for the \fBdsbitmap\fR command
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fB\fIdata_volume\fR\fR \fB[\fIbitmap_volume\fR]\fR\fR
 .ad
@@ -62,7 +60,6 @@ this volume is large enough to be used as the bitmap volume for
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fB\fIdata_volume\fR\fR \fB[\fIbitmap_volume\fR]\fR\fR
 .ad
@@ -91,46 +88,38 @@ volumes that have been created are suitable.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 13n
-.rt  
 Successful completion. If the name of a bitmap volume was specified, that
 volume is sufficiently large for all potential uses.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 13n
-.rt  
 An error occurred.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 13n
-.rt  
 An invalid option was supplied on the command line.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 13n
-.rt  
 The specified bitmap volume is not large enough to be used as an Availability
 Suite Remote Mirror bitmap for an asynchronous set with a disk queue, but is
 large enough to be used for all other Remote Mirror set configurations.
@@ -138,36 +127,30 @@ large enough to be used for all other Remote Mirror set configurations.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR\fR
 .ad
 .RS 13n
-.rt  
 The specified bitmap volume is not large enough to be used as an Availability
 Suite Remote Mirror bitmap for any Remote Mirror set configuration.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB5\fR\fR
 .ad
 .RS 13n
-.rt  
 The specified bitmap volume is not large enough to be used as an Availability
 Suite Remote Mirror bitmap for any Remote Mirror set configuration.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB6\fR\fR
 .ad
 .RS 13n
-.rt  
 The specified bitmap volume is not large enough to be used as an Availability
 Suite Point in Time bitmap for a compact dependent shadow, but is large enough
 to be used for all other Point in Time set configurations.
@@ -181,13 +164,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/dscfg.1m b/usr/src/man/man1m/dscfg.1m
index c87b84d3ef..1b7bc165d9 100644
--- a/usr/src/man/man1m/dscfg.1m
+++ b/usr/src/man/man1m/dscfg.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH dscfg 1M "2 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH DSCFG 1M "Oct 2, 2007"
 .SH NAME
 dscfg \- configuration tool for Sun StorageTek Availability Suite software
 .SH SYNOPSIS
@@ -65,7 +65,6 @@ If no options are specified, \fBdscfg\fR displays the current local
 configuration location. The \fBdscfg\fR command supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR\fR
 .ad
@@ -79,7 +78,6 @@ lock.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -90,7 +88,6 @@ Displays the usage message for the \fBdscfg\fR command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
@@ -103,7 +100,6 @@ before proceeding.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIparser_config_file\fR\fR
 .ad
@@ -116,7 +112,6 @@ database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIconfig_file\fR\fR
 .ad
@@ -129,7 +124,6 @@ configuration file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
@@ -147,7 +141,6 @@ The options below are for Sun Cluster-configured systems only. \fIgroup\fR can
 be either Sun Cluster device group or as '-' as local devices.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR \fIgroup\fR\fR
 .ad
@@ -158,7 +151,6 @@ Display the location of cluster configuration database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR\ \fIgroup\fR\ \fB-i\fR\fR
 .ad
@@ -171,7 +163,6 @@ options prompts you to confirm the deletion before proceeding.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR\ \fIgroup\fR\ \fB-p\fR\ \fIparser_config_file\fR\fR
 .ad
@@ -184,7 +175,6 @@ entries that only associated with group specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR \ \fIgroup\fR\ \fB-a\fR\ \fIconfig_file\fR\fR
 .ad
@@ -197,7 +187,6 @@ checking of the file. Use of this option invalidates the configuration file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR\ \fIgroup\fR\ \fB-l\fR\fR
 .ad
@@ -209,7 +198,6 @@ resource group specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR \ \fIgroup\fR\ \fB-s\fR\ \fIconfig_file_location\fR\fR
 .ad
@@ -221,7 +209,6 @@ has to be DID device.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR \fIdevice_group\fR\fR
 .ad
@@ -234,34 +221,28 @@ the device group's status and return values are as follows,
 (use echo $? to retrieve the return value):
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 13n
-.rt  
 Device group is in Sun Cluster and is active on this node;
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 13n
-.rt  
 Device group is in Sun Cluster but active on another node;
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-1\fR\fR
 .ad
 .RS 13n
-.rt  
 Device group is not in Sun Cluster.
 .RE
 
@@ -277,7 +258,6 @@ refer to the \fIAvailability Suite Troubleshooting Guide\fR.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dscfg_format\fR\fR
 .ad
@@ -288,7 +268,6 @@ parser configuration file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dscfg_local\fR\fR
 .ad
@@ -299,7 +278,6 @@ configuration location for all entries with no cluster tags
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dscfg_cluster\fR\fR
 .ad
@@ -317,13 +295,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/dscfgadm.1m b/usr/src/man/man1m/dscfgadm.1m
index 2177e43d02..92b6df73a5 100644
--- a/usr/src/man/man1m/dscfgadm.1m
+++ b/usr/src/man/man1m/dscfgadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH dscfgadm 1M "2 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH DSCFGADM 1M "Oct 2, 2007"
 .SH NAME
 dscfgadm \- administration command for the Availability Suite configuration
 location and services
@@ -46,7 +46,6 @@ criteria such as size and file type before it is initialized for use.
 The \fBdscfgadm\fR command supports the following options.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR [\fB-r\fR ]\fR
 .ad
@@ -59,7 +58,6 @@ options, the \fB-d\fR option disables all Availability Suite services. This
 setting is persistent across system boots.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -73,7 +71,6 @@ services.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR [\fB-r\fR ] [\fB-p\fR]\fR
 .ad
@@ -86,7 +83,6 @@ additional options, the \fB-e\fR option enables all Availability Suite
 services. This setting is persistent across system boots.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -98,7 +94,6 @@ services.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
@@ -112,7 +107,6 @@ service.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
@@ -123,7 +117,6 @@ Displays information on the Availability Suite SMF services.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
@@ -135,7 +128,6 @@ information specific to Sun Cluster configurations.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
@@ -152,13 +144,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/dscfglockd.1m b/usr/src/man/man1m/dscfglockd.1m
index 72021214e0..e7830789aa 100644
--- a/usr/src/man/man1m/dscfglockd.1m
+++ b/usr/src/man/man1m/dscfglockd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH dscfglockd 1M "2 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH DSCFGLOCKD 1M "Oct 2, 2007"
 .SH NAME
 dscfglockd \- Availability Suite Services lock daemon
 .SH SYNOPSIS
@@ -23,7 +23,6 @@ requests between nodes within a cluster.
 The \fBdscfglockd\fR supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIprogram\fR\fR
 .ad
@@ -36,7 +35,6 @@ to this option. This argument is processed by \fBsh\fR(1).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfile\fR\fR
 .ad
@@ -53,30 +51,25 @@ local host as part of their own configuration process.
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 13n
-.rt  
 Daemon started successfully.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 13n
-.rt  
 Daemon failed to start.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/lib/svc/method/svc-scm\fR\fR
 .ad
@@ -93,13 +86,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/dsstat.1m b/usr/src/man/man1m/dsstat.1m
index 4fbf3c0b55..16a8ba8ca9 100644
--- a/usr/src/man/man1m/dsstat.1m
+++ b/usr/src/man/man1m/dsstat.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH dsstat 1M "2 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH DSSTAT 1M "Oct 2, 2007"
 .SH NAME
 dsstat \- report Sun StorageTek Availability Suite I/O statistics
 .SH SYNOPSIS
@@ -24,7 +24,6 @@ StorageTek Availability Suite products.
 The \fBdsstat\fR supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fB\fImode\fR\fR\fR
 .ad
@@ -33,7 +32,6 @@ The \fBdsstat\fR supports the following options:
 Specifies the mode(s) of operation. Valid modes are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcache\fR\fR
 .ad
@@ -44,7 +42,6 @@ Cache statistics
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBii\fR\fR
 .ad
@@ -55,7 +52,6 @@ Point-in-Time Copy statistics
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsndr\fR\fR
 .ad
@@ -86,7 +82,6 @@ descriptions of these fields.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fB\fIreport-options\fR\fR\fR
 .ad
@@ -100,12 +95,10 @@ vary based on the mode(s) specified above. This option is not used for
 Valid \fIreport-options\fR for \fBii\fR mode are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBm\fR\fR
 .ad
 .RS 13n
-.rt  
 Master volume statistics.
 .RS +4
 .TP
@@ -137,57 +130,47 @@ For the "display-options for ii mode": \fBr\fR, \fBw\fR, \fBt\fR, \fBs\fR,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBs\fR\fR
 .ad
 .RS 13n
-.rt  
 Shadow volume statistics.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBb\fR\fR
 .ad
 .RS 13n
-.rt  
 Bitmap volume statistics.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBo\fR\fR
 .ad
 .RS 13n
-.rt  
 Overflow volume statistics, if attached.
 .RE
 
 Valid \fIreport-options\fR for \fBsndr\fR mode are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBb\fR\fR
 .ad
 .RS 13n
-.rt  
 Bitmap volume statistics.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBn\fR\fR
 .ad
 .RS 13n
-.rt  
 Network volume statistics.
 .RE
 
@@ -195,7 +178,6 @@ Network volume statistics.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdisplay-options\fR\fR
 .ad
@@ -207,45 +189,37 @@ represented by a single character; multiple types can be specified.
 For \fBcache\fR mode, the valid \fIdisplay-options\fR are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBr\fR\fR
 .ad
 .RS 13n
-.rt  
 Detailed read statistics.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBw\fR\fR
 .ad
 .RS 13n
-.rt  
 Detailed write statistics.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBs\fR\fR
 .ad
 .RS 13n
-.rt  
 Summary statistics.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBf\fR\fR
 .ad
 .RS 13n
-.rt  
 Cache behavior flags.
 .RE
 
@@ -253,23 +227,19 @@ The following \fIdisplay-options\fR are available only for cache mode, they
 need to be combined with the mode options (\fB-m\fR)
 .sp
 .ne 2
-.mk
 .na
 \fB\fBd\fR\fR
 .ad
 .RS 13n
-.rt  
 Destaged data statistics.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBc\fR\fR
 .ad
 .RS 13n
-.rt  
 Write cancellation statistics.
 .RE
 
@@ -278,7 +248,6 @@ The default \fIdisplay-options\fR for \fBcache\fR are \fBsf\fR.
 For \fBii\fR mode, the valid \fIdisplay-options\fR are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBr\fR\fR
 .ad
@@ -289,7 +258,6 @@ Detailed read statistics.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBw\fR\fR
 .ad
@@ -300,7 +268,6 @@ Detailed write statistics.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBt\fR\fR
 .ad
@@ -311,7 +278,6 @@ Timing statistics.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBs\fR\fR
 .ad
@@ -322,7 +288,6 @@ Summary statistics.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBp\fR\fR
 .ad
@@ -333,7 +298,6 @@ Percentage of volume requiring sync.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBf\fR\fR
 .ad
@@ -346,78 +310,64 @@ The default \fIdisplay-options\fR for \fBii\fR are \fBspf\fR. For \fBsndr\fR
 mode, the valid \fIdisplay-options\fR are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBr\fR\fR
 .ad
 .RS 13n
-.rt  
 Detailed read statistics.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBw\fR\fR
 .ad
 .RS 13n
-.rt  
 Detailed write statistics.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBt\fR\fR
 .ad
 .RS 13n
-.rt  
 Timing statistics.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBs\fR\fR
 .ad
 .RS 13n
-.rt  
 Summary statistics.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBp\fR\fR
 .ad
 .RS 13n
-.rt  
 Percentage of volume requiring sync.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBf\fR\fR
 .ad
 .RS 13n
-.rt  
 Volume type/status flags.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBq\fR\fR
 .ad
 .RS 13n
-.rt  
 Asynchronous queue statistics.
 .RE
 
@@ -425,12 +375,10 @@ The following \fIdisplay-option\fR is only available for \fBsndr\fR mode, and
 needs to be combined with the mode options (\fB-m\fR).
 .sp
 .ne 2
-.mk
 .na
 \fB\fBq\fR\fR
 .ad
 .RS 13n
-.rt  
 Asynchronous queue statistics.
 .RE
 
@@ -442,12 +390,10 @@ Specifying the summary \fIdisplay-option\fR causes \fBr\fR \fBw\fR \fBt\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fB\fIvolume-sets\fR\fR\fR
 .ad
 .RS 20n
-.rt  
 Filters the output to include only the specified \fIvolume-sets\fR, where
 \fIvolume-sets\fR is a comma-delimited list of volume names. When displaying
 Remote Mirror statistics, the name specified is compared to the Remote Mirror
@@ -463,34 +409,28 @@ shadow volume to determine if they match.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 20n
-.rt  
 Output field headers at every reporting cycle.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fR
 .ad
 .RS 20n
-.rt  
 Output field headers once, when reporting begins.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-z\fR\fR
 .ad
 .RS 20n
-.rt  
 Suppress report lines that have zero values or no activity.
 .RE
 
@@ -500,7 +440,6 @@ Suppress report lines that have zero values or no activity.
 The \fBdsstat\fR command line supports the following operands:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIinterval\fR\fR
 .ad
@@ -517,7 +456,6 @@ information at the desired time.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcount\fR\fR
 .ad
@@ -534,309 +472,253 @@ Unless otherwise specified, all fields are per-second averages based on the
 data collected during the specified \fIinterval\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBname\fR\fR
 .ad
 .RS 13n
-.rt  
 Name of the entity being reported
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBt\fR\fR
 .ad
 .RS 13n
-.rt  
 Volume type
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBs\fR\fR
 .ad
 .RS 13n
-.rt  
 Volume status
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBr\fR\fR
 .ad
 .RS 13n
-.rt  
 Cache read behavior
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBw\fR\fR
 .ad
 .RS 13n
-.rt  
 Cache write behavior
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpct\fR\fR
 .ad
 .RS 13n
-.rt  
 Percentage of volume requiring sync
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrole\fR\fR
 .ad
 .RS 13n
-.rt  
 Role of the item being reported
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtps\fR\fR
 .ad
 .RS 13n
-.rt  
 Total number of reads + writes
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrtps\fR\fR
 .ad
 .RS 13n
-.rt  
 Number of reads
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwtps\fR\fR
 .ad
 .RS 13n
-.rt  
 Number of writes
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBkps\fR\fR
 .ad
 .RS 13n
-.rt  
 Total kilobytes read + written
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrkps\fR\fR
 .ad
 .RS 13n
-.rt  
 Kilobytes read
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwkps\fR\fR
 .ad
 .RS 13n
-.rt  
 Kilobytes written
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcrkps\fR\fR
 .ad
 .RS 13n
-.rt  
 Kilobytes read from cache
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdrkps\fR\fR
 .ad
 .RS 13n
-.rt  
 Kilobytes read from disk
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcwkps\fR\fR
 .ad
 .RS 13n
-.rt  
 Kilobytes written to cache
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdwkps\fR\fR
 .ad
 .RS 13n
-.rt  
 Kilobytes written to disk
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBckps\fR\fR
 .ad
 .RS 13n
-.rt  
 Kilobytes transferred to or from cache
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdkps\fR\fR
 .ad
 .RS 13n
-.rt  
 Kilobytes transferred to or from disk
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsvt\fR\fR
 .ad
 .RS 13n
-.rt  
 Service time per operation
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhit\fR\fR
 .ad
 .RS 13n
-.rt  
 Read hits during \fIinterval\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBds/s\fR\fR
 .ad
 .RS 13n
-.rt  
 Kilobytes destaged from cache
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcn/s\fR\fR
 .ad
 .RS 13n
-.rt  
 Number of write cancellations
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBq\fR\fR
 .ad
 .RS 13n
-.rt  
 Type of asynchronous queuing being used
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBqi\fR\fR
 .ad
 .RS 13n
-.rt  
 Number of items currently queued
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBqk\fR\fR
 .ad
 .RS 13n
-.rt  
 Kilobytes currently queued
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBqhwi\fR\fR
 .ad
 .RS 13n
-.rt  
 High water mark of queued items
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBqhwk\fR\fR
 .ad
 .RS 13n
-.rt  
 High water mark of queued kilobytes
 .RE
 
@@ -848,23 +730,19 @@ The \fBname\fR field displays only the last 16 characters of the name.
 Valid cache behaviors for \fBcache\fR are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBC\fR\fR
 .ad
 .RS 13n
-.rt  
 Cache reads/writes
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBD\fR\fR
 .ad
 .RS 13n
-.rt  
 Disk reads/writes
 .RE
 
@@ -873,23 +751,19 @@ Disk reads/writes
 Valid volume types for \fBii\fR are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBI\fR\fR
 .ad
 .RS 13n
-.rt  
 Independent shadow volume
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBD\fR\fR
 .ad
 .RS 13n
-.rt  
 Dependent shadow volume
 .RE
 
@@ -898,23 +772,19 @@ Dependent shadow volume
 Valid volume status for \fBii\fR is:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBC\fR\fR
 .ad
 .RS 13n
-.rt  
 Copy in progress
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-\fR\fR
 .ad
 .RS 13n
-.rt  
 No copy in progress
 .RE
 
@@ -923,23 +793,19 @@ No copy in progress
 Valid volume types for \fBsndr\fR are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBP\fR\fR
 .ad
 .RS 13n
-.rt  
 This is the primary host of this volume set
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBS\fR\fR
 .ad
 .RS 13n
-.rt  
 This is the secondary host of this volume set
 .RE
 
@@ -948,111 +814,91 @@ This is the secondary host of this volume set
 Valid volume status for \fBsndr\fR is:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBL\fR\fR
 .ad
 .RS 13n
-.rt  
 Changes to this volume are being logged
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBQ\fR\fR
 .ad
 .RS 13n
-.rt  
 Volume are in queuing mode
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBR\fR\fR
 .ad
 .RS 13n
-.rt  
 Replicating changes to secondary
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSY\fR\fR
 .ad
 .RS 13n
-.rt  
 Synchronization in progress. Sending data.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRS\fR\fR
 .ad
 .RS 13n
-.rt  
 Reverse synchronization in progress. Receiving data.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSN\fR\fR
 .ad
 .RS 13n
-.rt  
 Synchronization needed
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRN\fR\fR
 .ad
 .RS 13n
-.rt  
 Reverse synchronization needed
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBVF\fR\fR
 .ad
 .RS 13n
-.rt  
 Volume failed
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBBF\fR\fR
 .ad
 .RS 13n
-.rt  
 Bitmap failed
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBQF\fR\fR
 .ad
 .RS 13n
-.rt  
 Queue failed
 .RE
 
@@ -1061,23 +907,19 @@ Queue failed
 Valid queue types for \fBsndr\fR are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBD\fR\fR
 .ad
 .RS 13n
-.rt  
 Disk-based queuing enabled
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBM\fR\fR
 .ad
 .RS 13n
-.rt  
 Memory-based queuing enabled
 .RE
 
@@ -1086,23 +928,19 @@ Memory-based queuing enabled
 Volume roles for \fBsndr\fR are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnet\fR\fR
 .ad
 .RS 13n
-.rt  
 Network volume statistics
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbmp\fR\fR
 .ad
 .RS 13n
-.rt  
 Bitmap volume statistics
 .RE
 
@@ -1111,45 +949,37 @@ Bitmap volume statistics
 Volume roles for \fBii\fR are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmst\fR\fR
 .ad
 .RS 13n
-.rt  
 Master volume statistics
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshd\fR\fR
 .ad
 .RS 13n
-.rt  
 Shadow volume statistics
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbmp\fR\fR
 .ad
 .RS 13n
-.rt  
 Bitmap volume statistics
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBovr\fR\fR
 .ad
 .RS 13n
-.rt  
 Overflow volume statistics
 .RE
 
@@ -1167,13 +997,13 @@ five second intervals. Reporting is limited to the set
 .in +2
 .nf
  # dsstat -m cache -d rw -s /dev/rdsk/c1t1d0s0 5
-- read -             - write -      
-name                ckps   dkps    hit   ckps   dkps    hit 
-dev/rdsk/c1t1d0s0      0      0   0.00      0      0   0.00 
-dev/rdsk/c1t1d0s0      3   2396   0.13    983    763 100.00 
-dev/rdsk/c1t1d0s0   2399    799  75.00   2815   2686 100.00 
-dev/rdsk/c1t1d0s0   3200    800  80.00   2755   2908 100.00 
-dev/rdsk/c1t1d0s0   3999    799  83.33   2809   2868 100.00 
+- read -             - write -
+name                ckps   dkps    hit   ckps   dkps    hit
+dev/rdsk/c1t1d0s0      0      0   0.00      0      0   0.00
+dev/rdsk/c1t1d0s0      3   2396   0.13    983    763 100.00
+dev/rdsk/c1t1d0s0   2399    799  75.00   2815   2686 100.00
+dev/rdsk/c1t1d0s0   3200    800  80.00   2755   2908 100.00
+dev/rdsk/c1t1d0s0   3999    799  83.33   2809   2868 100.00
 dev/rdsk/c1t1d0s0   4800    800  85.71   2867   2931 100.00
 .fi
 .in -2
@@ -1188,16 +1018,16 @@ default output. Generate reports at two second intervals.
 .sp
 .in +2
 .nf
-# dsstat -m ii -r msb 2 
-name               t  s    pct role    kps   tps  svt 
-dev/rdsk/c0t1d0s5  I  C  96.15  mst  19921    38   22 
-dev/rdsk/c0t1d0s6               shd   9960    19   20 
-dev/rdsk/c0t1d0s7               bmp     39    77    2 
-dev/rdsk/c0t1d0s5  I  C  94.24  mst  19623    38   22 
-dev/rdsk/c0t1d0s6               shd   9939    19   20 
-dev/rdsk/c0t1d0s7               bmp     39    77    2 
-dev/rdsk/c0t1d0s5  I  C  92.34  mst  19969    39   22 
-dev/rdsk/c0t1d0s6               shd   9984    19   20 
+# dsstat -m ii -r msb 2
+name               t  s    pct role    kps   tps  svt
+dev/rdsk/c0t1d0s5  I  C  96.15  mst  19921    38   22
+dev/rdsk/c0t1d0s6               shd   9960    19   20
+dev/rdsk/c0t1d0s7               bmp     39    77    2
+dev/rdsk/c0t1d0s5  I  C  94.24  mst  19623    38   22
+dev/rdsk/c0t1d0s6               shd   9939    19   20
+dev/rdsk/c0t1d0s7               bmp     39    77    2
+dev/rdsk/c0t1d0s5  I  C  92.34  mst  19969    39   22
+dev/rdsk/c0t1d0s6               shd   9984    19   20
 dev/rdsk/c0t1d0s7               bmp     39    78    2
 .fi
 .in -2
@@ -1214,13 +1044,13 @@ reports at two second intervals. Limit reporting to the set
 .sp
 .in +2
 .nf
-# dsstat -m sndr -r n -d rwpf -s /dev/rdsk/c0t1d0s0 2 
-name               t  s    pct role   rkps  rtps   wkps  wtps 
-dev/rdsk/c0t1d0s0  P  L 100.00  sec      0     0      0     0 
-dev/rdsk/c0t1d0s0  P SY  99.90  sec      0     0    288     9 
-dev/rdsk/c0t1d0s0  P SY  97.90  sec      0     0   5296   165 
-dev/rdsk/c0t1d0s0  P SY  95.81  sec      0     0   5184   161 
-dev/rdsk/c0t1d0s0  P SY  93.81  sec      0     0   5280   164 
+# dsstat -m sndr -r n -d rwpf -s /dev/rdsk/c0t1d0s0 2
+name               t  s    pct role   rkps  rtps   wkps  wtps
+dev/rdsk/c0t1d0s0  P  L 100.00  sec      0     0      0     0
+dev/rdsk/c0t1d0s0  P SY  99.90  sec      0     0    288     9
+dev/rdsk/c0t1d0s0  P SY  97.90  sec      0     0   5296   165
+dev/rdsk/c0t1d0s0  P SY  95.81  sec      0     0   5184   161
+dev/rdsk/c0t1d0s0  P SY  93.81  sec      0     0   5280   164
 dev/rdsk/c0t1d0s0  P SY  91.71  sec      0     0   5198   162
 .fi
 .in -2
@@ -1231,56 +1061,46 @@ dev/rdsk/c0t1d0s0  P SY  91.71  sec      0     0   5198   162
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 13n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 13n
-.rt  
 Successful completion, no statistics to report.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 13n
-.rt  
 An invalid argument has been encountered.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 13n
-.rt  
 No memory is available to create \fBkstat\fR statistics.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR\fR
 .ad
 .RS 13n
-.rt  
 An unknown error has occurred.
 .RE
 
@@ -1292,13 +1112,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/dsvclockd.1m b/usr/src/man/man1m/dsvclockd.1m
index d1c787fbc6..3fec91a004 100644
--- a/usr/src/man/man1m/dsvclockd.1m
+++ b/usr/src/man/man1m/dsvclockd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH dsvclockd 1M "3 Dec 2001" "SunOS 5.11" "System Administration Commands"
+.TH DSVCLOCKD 1M "Dec 3, 2001"
 .SH NAME
 dsvclockd \- DHCP service lock daemon
 .SH SYNOPSIS
@@ -32,36 +32,30 @@ specified.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fB1\fR | \fB2\fR\fR
 .ad
 .RS 12n
-.rt  
 Set debug level. Two levels of debugging are currently available, \fB1\fR and
 \fB2\fR. Level \fB2\fR is more verbose.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 12n
-.rt  
 Run in the foreground instead of as a daemon process. When this option is used,
 messages are sent to standard error instead of to \fBsyslog\fR(3C).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 12n
-.rt  
 Provide verbose output.
 .RE
 
@@ -73,13 +67,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUnstable
+Interface Stability	Unstable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/dtrace.1m b/usr/src/man/man1m/dtrace.1m
index 1381044fe4..fc71612e0f 100644
--- a/usr/src/man/man1m/dtrace.1m
+++ b/usr/src/man/man1m/dtrace.1m
@@ -3,20 +3,20 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH dtrace 1M "4 Aug 2009" "SunOS 5.11" "System Administration Commands"
+.TH DTRACE 1M "Aug 4, 2009"
 .SH NAME
 dtrace \- DTrace dynamic tracing compiler and tracing utility
 .SH SYNOPSIS
 .LP
 .nf
-\fBdtrace\fR [\fB-32\fR | \fB-64\fR] [\fB-aACeFGHhlqSvVwZ\fR] [\fB-b\fR \fIbufsz\fR] [\fB-c\fR \fIcmd\fR] 
-     [\fB-D\fR \fIname\fR [\fI=value\fR]] [\fB-I\fR \fIpath\fR] [\fB-L\fR \fIpath\fR] [\fB-o\fR \fIoutput\fR] 
-     [\fB-s\fR \fIscript\fR] [\fB-U\fR \fIname\fR] [\fB-x\fR \fIarg\fR [\fI=val\fR]] 
-     [\fB-X\fR a | c | s | t] [\fB-p\fR \fIpid\fR] 
-     [\fB-P\fR \fIprovider\fR [[\fIpredicate\fR] \fIaction\fR]] 
-     [\fB-m\fR [\fIprovider:\fR] \fImodule\fR [[\fIpredicate\fR] \fIaction\fR]] 
-     [\fB-f\fR [[\fIprovider:\fR] \fImodule:\fR] \fIfunction\fR [[\fIpredicate\fR] \fIaction\fR]] 
-     [\fB-n\fR [[[\fIprovider:\fR] \fImodule:\fR] \fIfunction:\fR] \fIname\fR [[\fIpredicate\fR] \fIaction\fR]] 
+\fBdtrace\fR [\fB-32\fR | \fB-64\fR] [\fB-aACeFGHhlqSvVwZ\fR] [\fB-b\fR \fIbufsz\fR] [\fB-c\fR \fIcmd\fR]
+     [\fB-D\fR \fIname\fR [\fI=value\fR]] [\fB-I\fR \fIpath\fR] [\fB-L\fR \fIpath\fR] [\fB-o\fR \fIoutput\fR]
+     [\fB-s\fR \fIscript\fR] [\fB-U\fR \fIname\fR] [\fB-x\fR \fIarg\fR [\fI=val\fR]]
+     [\fB-X\fR a | c | s | t] [\fB-p\fR \fIpid\fR]
+     [\fB-P\fR \fIprovider\fR [[\fIpredicate\fR] \fIaction\fR]]
+     [\fB-m\fR [\fIprovider:\fR] \fImodule\fR [[\fIpredicate\fR] \fIaction\fR]]
+     [\fB-f\fR [[\fIprovider:\fR] \fImodule:\fR] \fIfunction\fR [[\fIpredicate\fR] \fIaction\fR]]
+     [\fB-n\fR [[[\fIprovider:\fR] \fImodule:\fR] \fIfunction:\fR] \fIname\fR [[\fIpredicate\fR] \fIaction\fR]]
      [\fB-i\fR \fIprobe-id\fR [[\fIpredicate\fR] \fIaction\fR]]
 .fi
 
@@ -97,7 +97,6 @@ appropriately quoted to avoid interpretation of meta-characters by the shell.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-32\fR | \fB-64\fR\fR
 .ad
@@ -118,7 +117,6 @@ format (ELF32 or ELF64) produced by the \fB-G\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -133,7 +131,6 @@ information about anonymous tracing.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR\fR
 .ad
@@ -149,7 +146,6 @@ the specified probes for anonymous tracing and then exits. By default,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR \fIbufsz\fR\fR
 .ad
@@ -163,7 +159,6 @@ size or exit depending on the setting of the \fBbufresize\fR property.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcmd\fR\fR
 .ad
@@ -180,7 +175,6 @@ for more information on macro variables.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR\fR
 .ad
@@ -195,7 +189,6 @@ the D compiler when invoking the C preprocessor, see \fB-X\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR \fIname\fR \fB[=\fR\fIvalue\fR\fB]\fR\fR
 .ad
@@ -209,7 +202,6 @@ option to each \fBcpp\fR invocation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
@@ -225,7 +217,6 @@ instrumentation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fB[[\fR\fIprovider\fR\fB:]\fR\fImodule\fR\fB:]\fR\fIfunction\fR\fB[
 [\fR\fIpredicate\fR\fB]\fR\fIaction\fR\fB]]\fR\fR
@@ -245,7 +236,6 @@ on the command line at a time.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fR
 .ad
@@ -261,7 +251,6 @@ their output is prefixed with \fB<=\fR\&.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-G\fR\fR
 .ad
@@ -279,7 +268,6 @@ whose name is \fB\fIfilename\fR.d\fR, then the ELF file is saved using the name
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-H\fR\fR
 .ad
@@ -293,7 +281,6 @@ invocation, causing it to display the list of pathnames, one for each line, to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -311,7 +298,6 @@ not present and the DTrace program is contained with a file whose name is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIprobe-id\fR\fB[[\fR\fIpredicate\fR] \fIaction\fR\fB]\fR\fR
 .ad
@@ -325,7 +311,6 @@ clause. You can specify more than one \fB-i\fR option at a time.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR \fIpath\fR\fR
 .ad
@@ -340,7 +325,6 @@ list.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR \fIpath\fR\fR
 .ad
@@ -354,7 +338,6 @@ search path.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
@@ -368,7 +351,6 @@ options. If none of these options are specified, this option lists all probes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR [[\fIprovider:\fR] \fImodule:\fR [[\fIpredicate\fR]
 \fIaction\fR]]\fR
@@ -387,7 +369,6 @@ on the command line at a time.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR [[[\fIprovider:\fR] \fImodule:\fR] \fIfunction:\fR] \fIname\fR
 [[\fIpredicate\fR] \fIaction\fR]\fR
@@ -407,7 +388,6 @@ specified on the command line at a time.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIoutput\fR\fR
 .ad
@@ -424,7 +404,6 @@ the default output file is \fBd.out\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIpid\fR\fR
 .ad
@@ -441,7 +420,6 @@ Dynamic Tracing Guide\fR for more information on macro variables.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIprovider\fR \fB[[\fR\fIpredicate\fR\fB]\fR \fIaction\fR]\fR
 .ad
@@ -456,7 +434,6 @@ suffixed with an optional D probe clause. You can specify more than one
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
@@ -471,7 +448,6 @@ data traced and formatted by D program statements such as \fBtrace()\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
@@ -487,7 +463,6 @@ program is enabled and tracing begins.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR\fR
 .ad
@@ -499,7 +474,6 @@ intermediate code generated for each D program to \fBstderr\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-U\fR \fIname\fR\fR
 .ad
@@ -512,7 +486,6 @@ invocation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -526,7 +499,6 @@ further detail in the \fISolaris Dynamic Tracing Guide\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
@@ -540,7 +512,6 @@ about DTrace versioning features.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR\fR
 .ad
@@ -554,7 +525,6 @@ enabling of a D program that contains destructive actions.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fIarg\fR [\fI=val\fR]\fR
 .ad
@@ -568,7 +538,6 @@ the option name and value with an equals sign (\fB=\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-X\fR \fBa | c | s | t\fR\fR
 .ad
@@ -582,12 +551,10 @@ depending upon the value of the argument letter.
 The \fB-X\fR option supports the following arguments:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBa\fR\fR
 .ad
 .RS 5n
-.rt  
 Default. ISO C plus K&R compatibility extensions, with semantic changes
 required by ISO C. This is the default mode if \fB-X\fR is not specified. The
 predefined macro \fB__STDC__\fR has a value of 0 when \fBcpp\fR is invoked in
@@ -596,12 +563,10 @@ conjunction with the \fB-Xa\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBc\fR\fR
 .ad
 .RS 5n
-.rt  
 Conformance. Strictly conformant ISO C, without K&R C compatibility extensions.
 The predefined macro \fB__STDC__\fR has a value of 1 when \fBcpp\fR is invoked
 in conjunction with the \fB-Xc\fR option.
@@ -609,24 +574,20 @@ in conjunction with the \fB-Xc\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBs\fR\fR
 .ad
 .RS 5n
-.rt  
 K&R C only. The macro \fB__STDC__\fR is not defined when \fBcpp\fR is invoked
 in conjunction with the \fB-Xs\fR option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBt\fR\fR
 .ad
 .RS 5n
-.rt  
 Transition. ISO C plus K&R C compatibility extensions, without semantic changes
 required by ISO C. The predefined macro \fB__STDC__\fR has a value of 0 when
 \fBcpp\fR is invoked in conjunction with the \fB-Xt\fR option.
@@ -708,7 +669,6 @@ information about DTrace versioning.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Z\fR\fR
 .ad
@@ -735,12 +695,10 @@ in the \fISolaris Dynamic Tracing Guide\fR.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB0\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .sp
 For D program requests, an exit status of \fB0\fR indicates that programs were
@@ -751,12 +709,10 @@ tracing requests encountered errors or drops.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 An error occurred.
 .sp
 For D program requests, an exit status of \fB1\fR indicates that program
@@ -765,12 +721,10 @@ compilation failed or that the specified request could not be satisfied.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Invalid command line options or arguments were specified.
 .RE
 
@@ -782,13 +736,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/dumpadm.1m b/usr/src/man/man1m/dumpadm.1m
index 776e11d262..cea8d120c3 100644
--- a/usr/src/man/man1m/dumpadm.1m
+++ b/usr/src/man/man1m/dumpadm.1m
@@ -3,14 +3,14 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH dumpadm 1M "10 Apr 2008" "SunOS 5.11" "System Administration Commands"
+.TH DUMPADM 1M "Apr 10, 2008"
 .SH NAME
 dumpadm \- configure operating system crash dump
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/dumpadm\fR [\fB-nuy\fR] [\fB-c\fR \fIcontent-type\fR] [\fB-d\fR \fIdump-device\fR] 
-     [\fB-m\fR \fImin\fRk | \fImin\fRm | \fImin\fR%] [\fB-s\fR \fIsavecore-dir\fR] 
+\fB/usr/sbin/dumpadm\fR [\fB-nuy\fR] [\fB-c\fR \fIcontent-type\fR] [\fB-d\fR \fIdump-device\fR]
+     [\fB-m\fR \fImin\fRk | \fImin\fRm | \fImin\fR%] [\fB-s\fR \fIsavecore-dir\fR]
      [\fB-r\fR \fIroot-dir\fR]
 .fi
 
@@ -82,7 +82,6 @@ dump parameters.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcontent-type\fR\fR
 .ad
@@ -92,7 +91,6 @@ Modify the dump configuration so that the crash dump consists of the specified
 dump content. The content should be one of the following:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBkernel\fR\fR
 .ad
@@ -103,7 +101,6 @@ Kernel memory pages only.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBall\fR\fR
 .ad
@@ -114,7 +111,6 @@ All memory pages.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcurproc\fR\fR
 .ad
@@ -130,7 +126,6 @@ process, only kernel pages will be dumped.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdump-device\fR\fR
 .ad
@@ -140,7 +135,6 @@ Modify the dump configuration to use the specified dump device. The dump device
 may one of the following:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdump-device\fR\fR
 .ad
@@ -154,7 +148,6 @@ the system is running a ZFS root file system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBswap\fR\fR
 .ad
@@ -174,7 +167,6 @@ device.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fImin\fR\fBk\fR | \fImin\fR\fBm\fR | \fImin\fR\fB%\fR\fR
 .ad
@@ -186,7 +178,6 @@ the file system where the savecore directory is located. The \fBmin\fR argument
 can be one of the following:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBk\fR\fR
 .ad
@@ -197,7 +188,6 @@ A positive integer suffixed with the unit \fBk\fR specifying kilobytes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBm\fR\fR
 .ad
@@ -208,7 +198,6 @@ A positive integer suffixed with the unit \fBm\fR specifying megabytes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%\fR\fR
 .ad
@@ -230,7 +219,6 @@ alternate directory on the \fBsavecore\fR command-line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -245,7 +233,6 @@ retrieval may not be possible.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIroot-dir\fR\fR
 .ad
@@ -258,7 +245,6 @@ create files. If no \fB-r\fR argument is specified, the default root directory
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsavecore-dir\fR\fR
 .ad
@@ -276,7 +262,6 @@ command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
@@ -294,7 +279,6 @@ with the kernel dump configuration.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-y\fR\fR
 .ad
@@ -330,7 +314,6 @@ example# dumpadm -d /dev/dsk/c0t2d0s2
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -342,7 +325,6 @@ successfully.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
@@ -353,7 +335,6 @@ A fatal error occurred in either obtaining or modifying the dump configuration.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
@@ -365,7 +346,6 @@ Invalid command line options were specified.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/dump\fR\fR
 .ad
@@ -376,7 +356,6 @@ Dump device.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dumpadm.conf\fR\fR
 .ad
@@ -388,7 +367,6 @@ that command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsavecore-directory\fR\fB/minfree\fR\fR
 .ad
diff --git a/usr/src/man/man1m/editmap.1m b/usr/src/man/man1m/editmap.1m
index 1586ec2955..aaa188d4e1 100644
--- a/usr/src/man/man1m/editmap.1m
+++ b/usr/src/man/man1m/editmap.1m
@@ -10,26 +10,26 @@
 .\" Copyright (c) 1998-2006, 2008 Sendmail, Inc. and its suppliers.  All rights reserved.
 .\" The following license terms and conditions apply, unless a different license is obtained from Sendmail, Inc., 6425 Christie Ave, Fourth Floor, Emeryville, CA 94608, USA, or by electronic mail at license@sendmail.com.  License Terms:  Use, Modification and Redistribution
 .\" (including distribution of any modified or derived work) in source and binary forms is permitted only if each of the following conditions is met:  1. Redistributions qualify as "freeware" or "Open Source Software" under    one of the following terms:     (a) Redistributions are made at no charge
-.\" beyond the reasonable cost of        materials and delivery.     (b) Redistributions are accompanied by a copy of the Source Code or by an        irrevocable offer to provide a copy of the Source Code for up to three       years at the cost of materials and delivery.  Such redistributions    
+.\" beyond the reasonable cost of        materials and delivery.     (b) Redistributions are accompanied by a copy of the Source Code or by an        irrevocable offer to provide a copy of the Source Code for up to three       years at the cost of materials and delivery.  Such redistributions
 .\"    must allow further use, modification, and redistribution of the Source       Code under substantially the same terms as this license.  For the        purposes of redistribution "Source Code" means the complete compilable       and linkable source code of sendmail including all modifications.
 .\"  2. Redistributions of source code must retain the copyright notices as they    appear in each source code file, these license terms, and the    disclaimer/limitation of liability set forth as paragraph 6 below.  3. Redistributions in binary form must reproduce the Copyright Notice,    these license
 .\" terms, and the disclaimer/limitation of liability set    forth as paragraph 6 below, in the documentation and/or other materials    provided with the distribution.  For the purposes of binary distribution    the "Copyright Notice" refers to the following language:    "Copyright (c) 1998-2004 Sendmail,
 .\" Inc.  All rights reserved."  4. Neither the name of Sendmail, Inc. nor the University of California nor    the names of their contributors may be used to endorse or promote    products derived from this software without specific prior written    permission.  The name "sendmail" is a trademark
 .\" of Sendmail, Inc.  5. All redistributions must comply with the conditions imposed by the    University of California on certain embedded code, whose copyright    notice and conditions for redistribution are as follows:     (a) Copyright (c) 1988, 1993 The Regents of the University of        California.
 .\"  All rights reserved.     (b) Redistribution and use in source and binary forms, with or without        modification, are permitted provided that the following conditions        are met:        (i)   Redistributions of source code must retain the above copyright             notice, this list of
-.\" conditions and the following disclaimer.        (ii)  Redistributions in binary form must reproduce the above             copyright notice, this list of conditions and the following             disclaimer in the documentation and/or other materials provided             with the distribution. 
+.\" conditions and the following disclaimer.        (ii)  Redistributions in binary form must reproduce the above             copyright notice, this list of conditions and the following             disclaimer in the documentation and/or other materials provided             with the distribution.
 .\"       (iii) Neither the name of the University nor the names of its             contributors may be used to endorse or promote products derived             from this software without specific prior written permission. 6. Disclaimer/Limitation of Liability: THIS SOFTWARE IS PROVIDED BY    SENDMAIL,
 .\" INC. AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED    WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF    MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN    NO EVENT SHALL SENDMAIL, INC., THE REGENTS OF THE UNIVERSITY OF    CALIFORNIA OR CONTRIBUTORS
 .\" BE LIABLE FOR ANY DIRECT, INDIRECT,    INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT    NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF    USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON    ANY THEORY OF LIABILITY, WHETHER
 .\" IN CONTRACT, STRICT LIABILITY, OR TORT    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF    THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
 .\" Portions Copyright (c) 2009, Sun Microsystems, Inc. All Rights Reserved.
-.TH editmap 1M "14 Sep 2001" "SunOS 5.11" "System Administration Commands"
+.TH EDITMAP 1M "Sep 14, 2001"
 .SH NAME
 editmap \- query and edit single records in database maps for sendmail
 .SH SYNOPSIS
 .LP
 .nf
-\fBeditmap\fR \fB-C\fR \fIfile\fR [\fB-N\fR] [\fB-f\fR] [\fB-q\fR | \fB-u\fR | \fB-x\fR] \fImaptype\fR \fImapname\fR \fIkey\fR 
+\fBeditmap\fR \fB-C\fR \fIfile\fR [\fB-N\fR] [\fB-f\fR] [\fB-q\fR | \fB-u\fR | \fB-x\fR] \fImaptype\fR \fImapname\fR \fIkey\fR
      ["\fIvalue\fR"]...
 .fi
 
@@ -55,24 +55,20 @@ specified \fBTrustedUser\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR \fIfile\fR\fR
 .ad
 .RS 11n
-.rt  
 Use the specified \fBsendmail\fR configuration file (\fIfile\fR) to look up the
 \fBTrustedUser\fR option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 11n
-.rt  
 Disable the folding of all upper case letters in the key to lower case.
 Normally, all upper case letters in the key are folded to upper case. This is
 intended to mesh with the \fB-f\fR flag in the \fBK\fR line  in
@@ -81,23 +77,19 @@ intended to mesh with the \fB-f\fR flag in the \fBK\fR line  in
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-N\fR\fR
 .ad
 .RS 11n
-.rt  
  Include the null byte that terminates strings in the map (for alias maps).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
 .RS 11n
-.rt  
 Query the map for the specified key. If found, print value to standard output
 and exit with \fB0\fR. If not found then print an error message to \fBstdout\fR
 and exit with \fBEX_UNAVAILABLE\fR.
@@ -105,24 +97,20 @@ and exit with \fBEX_UNAVAILABLE\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
 .RS 11n
-.rt  
 Update the record for key with value or inserts a new record if one doesn't
 exist. Exits with \fB0\fR on success or \fBEX_IOERR\fR on failure.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
 .RS 11n
-.rt  
  Delete the specific key from the map. Exit with \fB0\fR on success or
 \fBEX_IOERR\fR on failure.
 .RE
@@ -133,12 +121,10 @@ exist. Exits with \fB0\fR on success or \fBEX_IOERR\fR on failure.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIkey\fR\fR
 .ad
 .RS 12n
-.rt  
 The left hand side of a record.
 .sp
 Each record is of the form:
@@ -155,55 +141,45 @@ Each record is of the form:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fImapname\fR \fR
 .ad
 .RS 12n
-.rt  
 File name of the database map being created.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fImaptype\fR \fR
 .ad
 .RS 12n
-.rt  
 Specifies the database format. The following \fImaptype\fR parameters are
 available:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdbm\fR \fR
 .ad
 .RS 10n
-.rt  
 Specifies \fBDBM\fR format maps.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbtree\fR \fR
 .ad
 .RS 10n
-.rt  
 Specifies B-Tree format maps.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhash\fR \fR
 .ad
 .RS 10n
-.rt  
 Specifies hash format maps.
 .RE
 
@@ -211,12 +187,10 @@ Specifies hash format maps.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIvalue\fR\fR
 .ad
 .RS 12n
-.rt  
 The right hand side of a record.
 .sp
 Each record is of the form:
diff --git a/usr/src/man/man1m/edquota.1m b/usr/src/man/man1m/edquota.1m
index cb9d2e57d0..59b801b261 100644
--- a/usr/src/man/man1m/edquota.1m
+++ b/usr/src/man/man1m/edquota.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH edquota 1M "14 Feb 2003" "SunOS 5.11" "System Administration Commands"
+.TH EDQUOTA 1M "Feb 14, 2003"
 .SH NAME
 edquota \- edit user quotas for ufs file system
 .SH SYNOPSIS
@@ -65,12 +65,10 @@ The  \fInumber\fR fields may be modified to reflect desired values.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 6n
-.rt  
 Duplicate the quotas of the \fIproto_user\fR specified for each \fIusername\fR
 specified. This is the normal mechanism used to initialize quotas for groups of
 users.
@@ -78,12 +76,10 @@ users.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
 .RS 6n
-.rt  
 Edit the soft time limits for each file system. If the time limits are zero,
 the default time limits in \fB/usr/include/sys/fs/ufs_quota.h\fR are used. The
 temporary file created will have one or more lines of the form
@@ -109,23 +105,19 @@ when encountering files greater than or equal to 2 Gbyte ( 2^31 bytes).
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fBquotas\fR\fR
 .ad
 .RS 15n
-.rt  
 quota file at the file system root
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mnttab\fR\fR
 .ad
 .RS 15n
-.rt  
 table of mounted file systems
 .RE
 
diff --git a/usr/src/man/man1m/eeprom.1m b/usr/src/man/man1m/eeprom.1m
index e6c773c453..3f9ee04e2a 100644
--- a/usr/src/man/man1m/eeprom.1m
+++ b/usr/src/man/man1m/eeprom.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH eeprom 1M "28 Mar 2007" "SunOS 5.11" "System Administration Commands"
+.TH EEPROM 1M "Mar 28, 2007"
 .SH NAME
 eeprom \- EEPROM display and load utility
 .SH SYNOPSIS
@@ -57,7 +57,6 @@ systems.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIdevice\fR\fR
 .ad
@@ -70,7 +69,6 @@ Use \fIdevice\fR as the \fBEEPROM\fR device.
 .SS "x86 Only"
 .sp
 .ne 2
-.mk
 .na
 \fB\fIacpi-user-options\fR\fR
 .ad
@@ -101,7 +99,6 @@ and then, if you do not obtain satisfactory results, \fB0x02\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIconsole\fR\fR
 .ad
@@ -125,7 +122,6 @@ column of the \fBprintenv\fR command, as entered at the \fBok\fR (OpenBoot)
 prompt, to determine the default for your system.
 .sp
 .ne 2
-.mk
 .na
 \fBauto-boot?\fR
 .ad
@@ -138,7 +134,6 @@ If \fBtrue\fR, boots automatically after power-on or reset. Defaults to
 
 .sp
 .ne 2
-.mk
 .na
 \fBansi-terminal?\fR
 .ad
@@ -152,7 +147,6 @@ escape sequences; instead, echoes them to the output device. Defaults to
 
 .sp
 .ne 2
-.mk
 .na
 \fBboot-args\fR
 .ad
@@ -165,7 +159,6 @@ installation. See \fBboot\fR(1M), \fBkadb\fR(1M) and \fBkernel\fR(1M).
 
 .sp
 .ne 2
-.mk
 .na
 \fBboot-command\fR
 .ad
@@ -176,7 +169,6 @@ Command executed if \fBauto-boot?\fR is \fBtrue\fR. Defaults to \fBboot\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBboot-device\fR
 .ad
@@ -192,7 +184,6 @@ the device to boot from. Defaults to \fBdisk net\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBboot-file\fR
 .ad
@@ -204,7 +195,6 @@ Defaults to empty string.
 
 .sp
 .ne 2
-.mk
 .na
 \fBboot-from\fR
 .ad
@@ -216,7 +206,6 @@ Boot device and file (OpenBoot PROM version 1.\fIx\fR only). Defaults to
 
 .sp
 .ne 2
-.mk
 .na
 \fBboot-from-diag\fR
 .ad
@@ -228,7 +217,6 @@ Defaults to \fBle(\|)unix\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBboot-ncpus\fR
 .ad
@@ -241,7 +229,6 @@ of processors.
 
 .sp
 .ne 2
-.mk
 .na
 \fBcom\fIX\fR-noprobe\fR
 .ad
@@ -253,7 +240,6 @@ port \fIX.\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fBdiag-device\fR
 .ad
@@ -264,7 +250,6 @@ Diagnostic boot source device. Defaults to \fBnet\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBdiag-file\fR
 .ad
@@ -275,7 +260,6 @@ File from which to boot in diagnostic mode. Defaults to empty string.
 
 .sp
 .ne 2
-.mk
 .na
 \fBdiag-level\fR
 .ad
@@ -290,7 +274,6 @@ available as an argument to, and is interpreted by \fBPOST.\fR Defaults to
 
 .sp
 .ne 2
-.mk
 .na
 \fBdiag-switch?\fR
 .ad
@@ -302,7 +285,6 @@ systems, \fBtrue\fR on most servers.
 
 .sp
 .ne 2
-.mk
 .na
 \fBerror-reset-recovery\fR
 .ad
@@ -317,7 +299,6 @@ On platforms supporting this variable, it replaces the \fBwatchdog-reboot?\fR,
 The options are:
 .sp
 .ne 2
-.mk
 .na
 \fBnone\fR
 .ad
@@ -329,7 +310,6 @@ interface, \fBaka\fR \fBOK\fR prompt.
 
 .sp
 .ne 2
-.mk
 .na
 \fBsync\fR
 .ad
@@ -341,7 +321,6 @@ treat this as \fBnone\fR after an externally initiated reset (\fBXIR\fR) trap.
 
 .sp
 .ne 2
-.mk
 .na
 \fBboot\fR
 .ad
@@ -355,7 +334,6 @@ an \fBXIR\fR trap.
 
 .sp
 .ne 2
-.mk
 .na
 \fBfcode-debug?\fR
 .ad
@@ -367,7 +345,6 @@ If \fBtrue\fR, include name parameter for plug-in device FCodes. Defaults to
 
 .sp
 .ne 2
-.mk
 .na
 \fBhardware-revision\fR
 .ad
@@ -378,7 +355,6 @@ System version information.
 
 .sp
 .ne 2
-.mk
 .na
 \fBinput-device\fR
 .ad
@@ -390,7 +366,6 @@ Input device used at power-on (usually \fBkeyboard\fR, \fBttya\fR, or
 
 .sp
 .ne 2
-.mk
 .na
 \fBkeyboard-click?\fR
 .ad
@@ -401,7 +376,6 @@ If \fBtrue\fR, enable keyboard click. Defaults to \fBfalse\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBkeyboard-layout\fR
 .ad
@@ -414,7 +388,6 @@ names. See \fBkbd\fR(1).
 
 .sp
 .ne 2
-.mk
 .na
 \fBkeymap\fR
 .ad
@@ -425,7 +398,6 @@ Keymap for custom keyboard.
 
 .sp
 .ne 2
-.mk
 .na
 \fBlast-hardware-update\fR
 .ad
@@ -436,7 +408,6 @@ System update information.
 
 .sp
 .ne 2
-.mk
 .na
 \fBload-base\fR
 .ad
@@ -447,7 +418,6 @@ Default load address for client programs. Default value is \fB16384\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBlocal-mac-address?\fR
 .ad
@@ -459,7 +429,6 @@ to \fBfalse\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBmfg-mode\fR
 .ad
@@ -472,7 +441,6 @@ or \fBchamber\fR. The value is passed as an argument to \fBPOST.\fR Defaults to
 
 .sp
 .ne 2
-.mk
 .na
 \fBmfg-switch?\fR
 .ad
@@ -484,7 +452,6 @@ If true, repeat system self-tests until interrupted with STOP-A. Defaults to
 
 .sp
 .ne 2
-.mk
 .na
 \fBnvramrc\fR
 .ad
@@ -495,7 +462,6 @@ Contents of NVRAMRC. Defaults to empty.
 
 .sp
 .ne 2
-.mk
 .na
 \fBnetwork-boot-arguments\fR
 .ad
@@ -526,7 +492,6 @@ Configuration parameters, listed below, are specified as \fIkey\fR=\fIvalue\fR
 attribute pairs.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtftp-server\fR\fR
 .ad
@@ -537,7 +502,6 @@ IP address of the TFTP server
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfile\fR\fR
 .ad
@@ -548,7 +512,6 @@ file to download using TFTP or URL for WAN boot
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhost-ip\fR\fR
 .ad
@@ -559,7 +522,6 @@ IP address of the client (in dotted-decimal notation)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrouter-ip\fR\fR
 .ad
@@ -570,7 +532,6 @@ IP address of the default router (in dotted-decimal notation)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsubnet-mask\fR\fR
 .ad
@@ -581,7 +542,6 @@ subnet mask (in dotted-decimal notation)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBclient-id\fR\fR
 .ad
@@ -592,7 +552,6 @@ DHCP client identifier
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhostname\fR\fR
 .ad
@@ -603,7 +562,6 @@ hostname to use in DHCP transactions
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhttp-proxy\fR\fR
 .ad
@@ -614,7 +572,6 @@ HTTP proxy server specification (IPADDR[:PORT])
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtftp-retries\fR\fR
 .ad
@@ -625,7 +582,6 @@ maximum number of TFTP retries
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdhcp-retries\fR\fR
 .ad
@@ -657,7 +613,6 @@ also be specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fBoem-banner\fR
 .ad
@@ -669,7 +624,6 @@ Defaults to empty string.
 
 .sp
 .ne 2
-.mk
 .na
 \fBoem-banner?\fR
 .ad
@@ -680,7 +634,6 @@ If \fBtrue\fR, use custom \fBOEM\fR banner. Defaults to \fBfalse\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBoem-logo\fR
 .ad
@@ -692,7 +645,6 @@ Displayed in hexadecimal.
 
 .sp
 .ne 2
-.mk
 .na
 \fBoem-logo?\fR
 .ad
@@ -704,7 +656,6 @@ If \fBtrue\fR, use custom OEM logo (else, use Sun logo). Defaults to
 
 .sp
 .ne 2
-.mk
 .na
 \fBpci-mem64?\fR
 .ad
@@ -724,7 +675,6 @@ specific platform.
 
 .sp
 .ne 2
-.mk
 .na
 \fBoutput-device\fR
 .ad
@@ -736,7 +686,6 @@ Output device used at power-on (usually \fBscreen\fR, \fBttya\fR, or
 
 .sp
 .ne 2
-.mk
 .na
 \fBredmode-reboot?\fR
 .ad
@@ -748,7 +697,6 @@ Specify \fBtrue\fR to reboot after a redmode reset trap. Defaults to
 
 .sp
 .ne 2
-.mk
 .na
 \fBredmode-sync?\fR
 .ad
@@ -760,7 +708,6 @@ reset trap. Defaults to \fBfalse\fR. (Sun Enterprise 10000 only.)
 
 .sp
 .ne 2
-.mk
 .na
 \fBrootpath\fR
 .ad
@@ -771,7 +718,6 @@ Specifies the root device of the operating system.
 
 .sp
 .ne 2
-.mk
 .na
 \fBsbus-probe-list\fR
 .ad
@@ -783,7 +729,6 @@ Designate which SBus slots are probed and in what order. Defaults to
 
 .sp
 .ne 2
-.mk
 .na
 \fBscreen-#columns\fR
 .ad
@@ -794,7 +739,6 @@ Number of on-screen columns (characters/line). Defaults to \fB80\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBscreen-#rows\fR
 .ad
@@ -805,7 +749,6 @@ Number of on-screen rows (lines). Defaults to \fB34\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBscsi-initiator-id\fR
 .ad
@@ -816,7 +759,6 @@ Number of on-screen rows (lines). Defaults to \fB34\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBsd-targets\fR
 .ad
@@ -829,7 +771,6 @@ target \fB1\fR, and so on.
 
 .sp
 .ne 2
-.mk
 .na
 \fBsecurity-#badlogins\fR
 .ad
@@ -841,7 +782,6 @@ meaning or behavior on x86 based systems.
 
 .sp
 .ne 2
-.mk
 .na
 \fBsecurity-mode\fR
 .ad
@@ -855,7 +795,6 @@ behavior on x86 based systems.
 
 .sp
 .ne 2
-.mk
 .na
 \fBsecurity-password\fR
 .ad
@@ -879,7 +818,6 @@ Retype new password:
 
 .sp
 .ne 2
-.mk
 .na
 \fBselftest-#megs\fR
 .ad
@@ -891,7 +829,6 @@ Defaults to \fB1\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBsir-sync?\fR
 .ad
@@ -904,7 +841,6 @@ Enterprise 10000 only.)
 
 .sp
 .ne 2
-.mk
 .na
 \fBskip-vme-loopback?\fR
 .ad
@@ -915,7 +851,6 @@ If \fBtrue\fR, POST does not do VMEbus loopback tests. Defaults to \fBfalse\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBst-targets\fR
 .ad
@@ -928,7 +863,6 @@ target \fB5\fR, and so on.
 
 .sp
 .ne 2
-.mk
 .na
 \fBsunmon-compat?\fR
 .ad
@@ -940,7 +874,6 @@ If \fBtrue\fR, display Restricted Monitor prompt (\|>). Defaults to
 
 .sp
 .ne 2
-.mk
 .na
 \fBtestarea\fR
 .ad
@@ -951,7 +884,6 @@ One-byte scratch field, available for read/write test. Defaults to \fB0\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBtpe-link-test?\fR
 .ad
@@ -963,7 +895,6 @@ Enable 10baseT link test for built-in twisted pair Ethernet. Defaults to
 
 .sp
 .ne 2
-.mk
 .na
 \fBttya-mode\fR
 .ad
@@ -975,7 +906,6 @@ Enable 10baseT link test for built-in twisted pair Ethernet. Defaults to
 Fields, in left-to-right order, are:
 .sp
 .ne 2
-.mk
 .na
 \fBBaud rate:\fR
 .ad
@@ -986,7 +916,6 @@ Fields, in left-to-right order, are:
 
 .sp
 .ne 2
-.mk
 .na
 \fBData bits:\fR
 .ad
@@ -997,7 +926,6 @@ Fields, in left-to-right order, are:
 
 .sp
 .ne 2
-.mk
 .na
 \fBParity:\fR
 .ad
@@ -1008,7 +936,6 @@ n(none), e(even), o(odd), m(mark), s(space)
 
 .sp
 .ne 2
-.mk
 .na
 \fBStop bits:\fR
 .ad
@@ -1019,7 +946,6 @@ n(none), e(even), o(odd), m(mark), s(space)
 
 .sp
 .ne 2
-.mk
 .na
 \fBHandshake:\fR
 .ad
@@ -1032,7 +958,6 @@ n(none), e(even), o(odd), m(mark), s(space)
 
 .sp
 .ne 2
-.mk
 .na
 \fBttyb-mode\fR
 .ad
@@ -1044,7 +969,6 @@ n(none), e(even), o(odd), m(mark), s(space)
 Fields, in left-to-right order, are:
 .sp
 .ne 2
-.mk
 .na
 \fBBaud rate:\fR
 .ad
@@ -1055,7 +979,6 @@ Fields, in left-to-right order, are:
 
 .sp
 .ne 2
-.mk
 .na
 \fBData bits:\fR
 .ad
@@ -1066,7 +989,6 @@ Fields, in left-to-right order, are:
 
 .sp
 .ne 2
-.mk
 .na
 \fBStop bits:\fR
 .ad
@@ -1077,7 +999,6 @@ Fields, in left-to-right order, are:
 
 .sp
 .ne 2
-.mk
 .na
 \fBParity:\fR
 .ad
@@ -1088,7 +1009,6 @@ n(none), e(even), o(odd), m(mark), s(space)
 
 .sp
 .ne 2
-.mk
 .na
 \fBHandshake:\fR
 .ad
@@ -1101,7 +1021,6 @@ n(none), e(even), o(odd), m(mark), s(space)
 
 .sp
 .ne 2
-.mk
 .na
 \fBttya-ignore-cd\fR
 .ad
@@ -1113,7 +1032,6 @@ If \fBtrue\fR, operating system ignores carrier-detect on TTYA. Defaults to
 
 .sp
 .ne 2
-.mk
 .na
 \fBttyb-ignore-cd\fR
 .ad
@@ -1125,7 +1043,6 @@ If \fBtrue\fR, operating system ignores carrier-detect on TTYB. Defaults to
 
 .sp
 .ne 2
-.mk
 .na
 \fBttya-rts-dtr-off\fR
 .ad
@@ -1137,7 +1054,6 @@ to \fBfalse\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBttyb-rts-dtr-off\fR
 .ad
@@ -1149,7 +1065,6 @@ to \fBfalse\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBuse-nvramrc?\fR
 .ad
@@ -1161,7 +1076,6 @@ Defaults to \fBfalse\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBverbosity\fR
 .ad
@@ -1173,7 +1087,6 @@ Controls the level of verbosity of PROM messages. Can be one of \fBdebug\fR,
 
 .sp
 .ne 2
-.mk
 .na
 \fBversion2?\fR
 .ad
@@ -1185,7 +1098,6 @@ Defaults to \fBtrue\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBwatchdog-reboot?\fR
 .ad
@@ -1196,7 +1108,6 @@ If \fBtrue\fR, reboot after watchdog reset. Defaults to \fBfalse\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBwatchdog-sync?\fR
 .ad
@@ -1208,7 +1119,6 @@ reset trap. Defaults to \fBfalse\fR. ( Sun Enterprise 10000 only.)
 
 .sp
 .ne 2
-.mk
 .na
 \fBxir-sync?\fR
 .ad
@@ -1361,7 +1271,6 @@ you could set console to \fBttyb\fR if the second serial port is present.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/boot/solaris/bootenv.rc\fR\fR
 .ad
@@ -1372,7 +1281,6 @@ File storing \fBeeprom\fR values on x86 machines.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/openprom\fR\fR
 .ad
@@ -1383,7 +1291,6 @@ Device file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/platform/\fR\fIplatform-name\fR\fB/sbin/eeprom\fR\fR
 .ad
diff --git a/usr/src/man/man1m/efdaemon.1m b/usr/src/man/man1m/efdaemon.1m
index 75c3c4635c..cdf6c3aec8 100644
--- a/usr/src/man/man1m/efdaemon.1m
+++ b/usr/src/man/man1m/efdaemon.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH efdaemon 1M "10 Aug 2004" "SunOS 5.11" "System Administration Commands"
+.TH EFDAEMON 1M "Aug 10, 2004"
 .SH NAME
 efdaemon \- embedded FCode interpreter daemon
 .SH SYNOPSIS
@@ -29,12 +29,10 @@ dynamic reconfiguration events.
 The following option is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 6n
-.rt  
 Set debug output. Log debug messages as \fBLOG_DEBUG\fR level messages by using
 \fBsyslog()\fR. See \fBsyslog\fR(3C).
 .RE
@@ -42,7 +40,6 @@ Set debug output. Log debug messages as \fBLOG_DEBUG\fR level messages by using
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/fcode\fR\fR
 .ad
@@ -54,7 +51,6 @@ Set debug output. Log debug messages as \fBLOG_DEBUG\fR level messages by using
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/efcode/efcode\fR\fR
 .ad
@@ -65,7 +61,6 @@ Shell script that invokes the embedded \fBFCode\fR interpreter
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/efcode/interpreter\fR\fR
 .ad
@@ -76,7 +71,6 @@ Embedded \fBFCode\fR interpreter
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/efcode/sparcv9/interpreter\fR\fR
 .ad
diff --git a/usr/src/man/man1m/embedded_su.1m b/usr/src/man/man1m/embedded_su.1m
index 2ab96a902e..43cc654090 100644
--- a/usr/src/man/man1m/embedded_su.1m
+++ b/usr/src/man/man1m/embedded_su.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH embedded_su 1M "10 Feb 2005" "SunOS 5.11" "System Administration Commands"
+.TH EMBEDDED_SU 1M "Feb 10, 2005"
 .SH NAME
 embedded_su \- allow an application to prompt for credentials and execute
 commands as the super user or another user
@@ -65,46 +65,38 @@ A message header line consists of a \fBPAM\fR message style name, as described
 in \fBpam_start\fR(3PAM). The message header values are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPAM_PROMPT_ECHO_OFF\fR\fR
 .ad
 .RS 23n
-.rt  
 The application is to prompt the user for a value, with echoing disabled.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPAM_PROMPT_ECHO_ON\fR\fR
 .ad
 .RS 23n
-.rt  
 The application is to prompt the user for a value, with echoing enabled.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPAM_ERROR_MSG\fR\fR
 .ad
 .RS 23n
-.rt  
 The application is to display the message in a form appropriate for displaying
 an error.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPAM_TEXT_INFO\fR\fR
 .ad
 .RS 23n
-.rt  
 The application is to display the message in a form appropriate for general
 information.
 .RE
@@ -319,13 +311,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/etrn.1m b/usr/src/man/man1m/etrn.1m
index d2cde6abb6..ddb147e465 100644
--- a/usr/src/man/man1m/etrn.1m
+++ b/usr/src/man/man1m/etrn.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH etrn 1M "10 Aug 2004" "SunOS 5.11" "System Administration Commands"
+.TH ETRN 1M "Aug 10, 2004"
 .SH NAME
 etrn \- start mail queue run
 .SH SYNOPSIS
@@ -34,12 +34,10 @@ commands.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR\fR
 .ad
 .RS 6n
-.rt  
 System boot special case. Make sure localhost is accepting SMTP connections
 before initiating the SMTP session with server-host.
 .sp
@@ -51,12 +49,10 @@ deliver queued mail. This check is performed automatically if no
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 The normal mode of operation for \fBetrn\fR is to do all of its work silently.
 The \fB-v\fR option makes it verbose, which causes \fBetrn\fR to display its
 conversations with the remote SMTP server.
@@ -157,23 +153,19 @@ email, with that host name as the argument.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mail/sendmail.cf\fR\fR
 .ad
 .RS 25n
-.rt  
 \fBsendmail\fR configuration file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/sendmail\fR\fR
 .ad
 .RS 25n
-.rt  
 Variables used by \fBsvc:/network/smtp:sendmail\fR
 .RE
 
@@ -185,13 +177,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/fbconf_xorg.1m b/usr/src/man/man1m/fbconf_xorg.1m
index a38b13d799..a30e134568 100644
--- a/usr/src/man/man1m/fbconf_xorg.1m
+++ b/usr/src/man/man1m/fbconf_xorg.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fbconf_xorg 1M "26 Jan 2009" "SunOS 5.11" "System Administration Commands"
+.TH FBCONF_XORG 1M "Jan 26, 2009"
 .SH NAME
 fbconf_xorg \- configure frame buffer devices for Xorg
 .SH SYNOPSIS
@@ -94,7 +94,6 @@ someone with the Primary Administrator role. Consequently, the
 The following options are supported for all frame buffer devices:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-defaults\fR\fR
 .ad
@@ -107,7 +106,6 @@ portions of the \fBDEFAULTS\fR section below.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-dev\fR \fIdevice-file\fR\fR
 .ad
@@ -122,7 +120,6 @@ installed devices can be displayed using the \fB-list\fR option to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-file\fR \fBmachine\fR | \fBsystem\fR | \fIconfig-path\fR\fR
 .ad
@@ -140,7 +137,6 @@ specified. The default is \fBmachine\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-help\fR\fR
 .ad
@@ -154,7 +150,6 @@ option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-prconf\fR\fR
 .ad
@@ -198,7 +193,6 @@ Framelock Configuration:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-predid\fR  [\fBraw\fR] [\fBparsed\fR]\fR
 .ad
@@ -233,7 +227,6 @@ Block 0: EDID Base Block
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-propt\fR\fR
 .ad
@@ -279,7 +272,6 @@ The \fB-propt\fR output might resemble:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-res\fR \fB?\fR\fR
 .ad
@@ -320,7 +312,6 @@ Abbreviations such as "\fB1280x1024x75\fR" might also be used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-res\fR \fIvideo-mode\fR [\fBnocheck\fR | \fBnoconfirm\fR]\fR
 .ad
@@ -368,7 +359,6 @@ The \fB-res\fR option accepts suboption keywords following the video-mode
 specification.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnocheck\fR\fR
 .ad
@@ -385,7 +375,6 @@ connected to the frame buffer device. This suboption also implies
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnoconfirm\fR\fR
 .ad
@@ -406,7 +395,6 @@ devices. Unless specified otherwise, these options do not take effect until the
 user logs out and back in.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-deflinear\fR \fBtrue\fR | \fBfalse\fR\fR
 .ad
@@ -429,7 +417,6 @@ Enabling one causes the others to be disabled.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-defoverlay\fR \fBtrue\fR | \fBfalse\fR\fR
 .ad
@@ -454,7 +441,6 @@ Enabling one causes the others to be disabled.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-deftransparent\fR \fBtrue\fR | \fBfalse\fR\fR
 .ad
@@ -479,7 +465,6 @@ Enabling one causes the others to be disabled.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-doublehigh\fR \fBenable\fR | \fBdisable\fR\fR
 .ad
@@ -493,7 +478,6 @@ to be disabled.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-doublewide\fR \fBenable\fR | \fBdisable\fR\fR
 .ad
@@ -507,7 +491,6 @@ to be disabled.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR \fIgamma-correction-value\fR\fR
 .ad
@@ -522,7 +505,6 @@ displayed by linear visuals.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-gfile\fR \fIgamma-correction-file\fR\fR
 .ad
@@ -563,7 +545,6 @@ The following is an example of a \fIgamma-correction-file\fR file:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-multisample\fR \fBavailable\fR | \fBdisable\fR | \fBforceon\fR\fR
 .ad
@@ -581,7 +562,6 @@ the Sun OpenGL man page collection.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-offset\fR \fIx-val\fR \fIy-val\fR\fR
 .ad
@@ -597,7 +577,6 @@ top stream). The default is \fB[0,0]\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-samples\fR \fB1\fR | \fB2\fR  | \fB4\fR | \fB8\fR | \fB16\fR\fR
 .ad
@@ -613,7 +592,6 @@ utility can return the number of  multisamples after you specify the option
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-slave\fR \fBdisable\fR | \fBmultiview\fR\fR
 .ad
@@ -715,7 +693,6 @@ example% \fBfbconf_xorg -dev kfb0 -res 1280x1024x76\fR
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -726,7 +703,6 @@ Execution completed successfully.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
@@ -737,7 +713,6 @@ Invalid command line usage.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
@@ -749,7 +724,6 @@ An error occurred.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/fb\fR\fR
 .ad
@@ -760,7 +734,6 @@ Symbolic link to the default frame buffer device.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/fbs/kfb\fIn\fR\fR\fR
 .ad
@@ -771,7 +744,6 @@ Device special file for a \fBkfb\fR frame buffer
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/fbconfig/SunModes_xorg.conf\fR\fR
 .ad
@@ -788,13 +760,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/fcinfo.1m b/usr/src/man/man1m/fcinfo.1m
index ac68c49cee..9663635408 100644
--- a/usr/src/man/man1m/fcinfo.1m
+++ b/usr/src/man/man1m/fcinfo.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fcinfo 1M "26 Jul 2009" "SunOS 5.11" "System Administration Commands"
+.TH FCINFO 1M "Jul 26, 2009"
 .SH NAME
 fcinfo, fcadm \- Fibre Channel HBA Port Command Line Interface
 .SH SYNOPSIS
@@ -19,13 +19,13 @@ fcinfo, fcadm \- Fibre Channel HBA Port Command Line Interface
 
 .LP
 .nf
-\fBfcinfo\fR remote-port [\fB-ls\fR] [\fB-p\fR \fIHBA_port_WWN\fR] 
+\fBfcinfo\fR remote-port [\fB-ls\fR] [\fB-p\fR \fIHBA_port_WWN\fR]
      [\fIREMOTE_port_WWN\fR]...
 .fi
 
 .LP
 .nf
-\fBfcadm\fR remote-port [\fB-ls\fR] [\fB-p\fR \fIHBA_port_WWN\fR] 
+\fBfcadm\fR remote-port [\fB-ls\fR] [\fB-p\fR \fIHBA_port_WWN\fR]
      [\fIREMOTE_port_WWN\fR]...
 .fi
 
@@ -41,19 +41,19 @@ fcinfo, fcadm \- Fibre Channel HBA Port Command Line Interface
 
 .LP
 .nf
-\fBfcadm\fR create-npiv-port \fB-p\fR \fIVirtual_Port_WWN\fR [\fB-n\fR \fIVirtual_Node_WWN\fR] 
+\fBfcadm\fR create-npiv-port \fB-p\fR \fIVirtual_Port_WWN\fR [\fB-n\fR \fIVirtual_Node_WWN\fR]
      \fIPhysicalPort_port_WWN\fR
 .fi
 
 .LP
 .nf
-\fBfcadm\fR delete-npiv-port \fB-p\fR \fIVirtual_Port_WWN\fR [\fB-n\fR \fIVirtual_Node_WWN\fR] 
+\fBfcadm\fR delete-npiv-port \fB-p\fR \fIVirtual_Port_WWN\fR [\fB-n\fR \fIVirtual_Node_WWN\fR]
      \fIPhysicalPort_port_WWN\fR
 .fi
 
 .LP
 .nf
-\fBfcadm\fR create-fcoe-port [\fB-tf\fR] \fB-p\fR \fIPort_WWN\fR [\fB-n\fR \fINode_WWN\fR] 
+\fBfcadm\fR create-fcoe-port [\fB-tf\fR] \fB-p\fR \fIPort_WWN\fR [\fB-n\fR \fINode_WWN\fR]
      \fIMAC_Interface\fR
 .fi
 
@@ -111,12 +111,10 @@ not apply for the target mode port.
 The following subcommands are supported by both \fBfcinfo\fR and \fBfcadm\fR:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhba-port\fR\fR
 .ad
 .RS 21n
-.rt  
 Lists information for the \fBHBA\fR port referenced by the specified
 \fIHBA_port_WWN\fR. If \fIHBA_port_WWN\fR is not specified, all initiator mode
 and target mode fibre channel \fBHBA\fR ports on the host will be listed.
@@ -124,12 +122,10 @@ and target mode fibre channel \fBHBA\fR ports on the host will be listed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremote-port\fR\fR
 .ad
 .RS 21n
-.rt  
 Lists the \fIremote-port\fR information for those remote ports that are
 specified. If no \fIREMOTE_port_WWN\fR is specified, all remote ports that are
 visible through \fIHBA_port_WWN\fR are listed.
@@ -137,12 +133,10 @@ visible through \fIHBA_port_WWN\fR are listed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlogical-unit\fR | \fBlu\fR\fR
 .ad
 .RS 21n
-.rt  
 Lists the logical unit referenced by the specified \fIdevice_path\fR. If
 \fIdevice_path\fR is not specified, all fibre channel logical units will be
 listed. This subcommand applies only to the initiator mode.
@@ -154,7 +148,6 @@ The following subcommands, which administer N_Port ID Virtualization (NPIV) HBA
 ports, are supported only by \fBfcadm\fR:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcreate-npiv-port\fR\fR
 .ad
@@ -165,7 +158,6 @@ Create an NPIV virtual port on the specified adapter.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelete-npiv-port\fR\fR
 .ad
@@ -180,7 +172,6 @@ The following subcommands, which administer Fibre Channel over Ethernet (FCoE)
 ports, are supported only by \fBfcadm\fR:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcreate-fcoe-port\fR\fR
 .ad
@@ -197,7 +188,6 @@ enable FCoE.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelete-fcoe-port\fR\fR
 .ad
@@ -208,7 +198,6 @@ Deletes the FCoE port associated with the specified MAC interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist-fcoe-ports\fR\fR
 .ad
@@ -219,7 +208,6 @@ List information of FCoE ports.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBforce-lip\fR\fR
 .ad
@@ -241,7 +229,6 @@ any data loss.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR, \fB--fcoe\fR\fR
 .ad
@@ -252,7 +239,6 @@ Lists the information for all FCoE ports.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR, \fB--fcoe-promiscuous\fR\fR
 .ad
@@ -265,7 +251,6 @@ Promiscuous mode will be enabled for the specified MAC interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR, \fB--linkstat\fR\fR
 .ad
@@ -277,7 +262,6 @@ specified \fIHBA_port_WWN\fR or \fIREMOTE_port_WWN\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fIHBA_node_WWN\fR, \fB--node\fR \fIHBA_node_WWN\fR\fR
 .ad
@@ -294,7 +278,6 @@ the MAC address of the specified MAC interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIHBA_port_WWN\fR, \fB--port\fR \fIHBA_port_WWN\fR\fR
 .ad
@@ -315,7 +298,6 @@ the MAC address of the specified MAC interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR, \fB--scsi-target\fR\fR
 .ad
@@ -332,7 +314,6 @@ mode port.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR [\fIHBA_node_WWN\fR], \fB-target\fR [\fIHBA_node_WWN\fR]\fR
 .ad
@@ -346,7 +327,6 @@ When used with \fBcreate-fcoe-port\fR, create a FCoE target mode port.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR, \fB--verbose\fR\fR
 .ad
@@ -360,7 +340,6 @@ for the local and remote fibre channel ports to which this device is attached.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR, \fB--version\fR\fR
 .ad
@@ -371,7 +350,6 @@ Displays the version information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-?\fR, \fB--help\fR\fR
 .ad
@@ -456,7 +434,7 @@ HBA Port WWN: 210100e08b272ab5
         State: online
         Supported Speeds: 1Gb 2Gb
         Current Speed: 2Gb
-        Node WWN: 200100e08b272ab5    
+        Node WWN: 200100e08b272ab5
 .fi
 .in -2
 .sp
@@ -913,7 +891,7 @@ information:
 .in +2
 .nf
 # \fBfcinfo remote-port  -s -p 210100e08b272ab5\fR
- 
+
 Remote Port WWN: 210100e08b296a60
         Active FC4 Types: SCSI,IP
         SCSI Target: no
@@ -1035,10 +1013,10 @@ The following command lists the logical unit:
 .in +2
 .nf
 # \fBfcinfo logical-unit\fR
- 
+
 /dev/rdsk/c0t600C0FF0000000000036223AE73EB705d0s2
 /dev/rdsk/c0t600C0FF00000000000362272539E5B03d0s2
-/dev/rmt/0n             
+/dev/rmt/0n
 .fi
 .in -2
 .sp
@@ -1054,7 +1032,7 @@ using the \fB-v\fR option for device \fB/dev/rmt/On\fR:
 .in +2
 .nf
 # \fBfcinfo lu -v /dev/rmt/On\fR
- 
+
  OS Device Name: /dev/rmt/0n
         HBA Port WWN: 210000e07c030b91
         	      Remote Port WWN: 21010003b7830a6
@@ -1077,7 +1055,7 @@ using the \fB-v\fR option for device
 .nf
 # \fBfcinfo logical-unit -v \e\fR
      \fB/dev/rdsk/c0t600C0FF0000000000036223AE73EB705d0s2\fR
- 
+
  OS Device Name: /dev/rdsk/c0t600C0FF0000000000036223AE73EB705d0s2
         HBA Port WWN: 210100e08b27a8a1
                 Remote Port WWN: 256000c0ffc03622
@@ -1243,13 +1221,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/fdetach.1m b/usr/src/man/man1m/fdetach.1m
index e3780fe149..319e51f7b0 100644
--- a/usr/src/man/man1m/fdetach.1m
+++ b/usr/src/man/man1m/fdetach.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fdetach 1M "5 Jul 1990" "SunOS 5.11" "System Administration Commands"
+.TH FDETACH 1M "Jul 5, 1990"
 .SH NAME
 fdetach \- detach a name from a STREAMS-based file descriptor
 .SH SYNOPSIS
@@ -32,12 +32,10 @@ and status of the entry are restored to the state they were in before the
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpath\fR\fR
 .ad
 .RS 8n
-.rt  
 Specifies the path name of the object in the file system name space, which was
 previously attached.
 .RE
diff --git a/usr/src/man/man1m/fdisk.1m b/usr/src/man/man1m/fdisk.1m
index a78ce22214..e80673144c 100644
--- a/usr/src/man/man1m/fdisk.1m
+++ b/usr/src/man/man1m/fdisk.1m
@@ -3,18 +3,18 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fdisk 1M "2 Jul 2009" "SunOS 5.11" "System Administration Commands"
+.TH FDISK 1M "Jul 2, 2009"
 .SH NAME
 fdisk \- create or modify fixed disk partition table
 .SH SYNOPSIS
 .LP
 .nf
-\fBfdisk\fR [\fB-o\fR \fIoffset\fR] [\fB-s\fR \fIsize\fR] [\fB-P\fR \fIfill_patt\fR] [\fB-S\fR \fIgeom_file\fR] 
-     [\fB-w\fR | \fB-r\fR | \fB-d\fR | \fB-n\fR | \fB-I\fR | \fB-B\fR | \fB-t\fR | \fB-T\fR | \fB-g\fR | \fB-G\fR | \fB-R\fR | \fB-E\fR] 
-     [-\fB-F\fR \fIfdisk_file\fR] [ [\fB-v\fR] \fB-W\fR {\fIfdisk_file\fR | \(mi}] 
-     [\fB-h\fR] [\fB-b\fR \fImasterboot\fR] 
-     [\fB-A\fR \fIid\fR : \fIact\fR : \fIbhead\fR : \fIbsect\fR : \fIbcyl\fR : \fIehead\fR : \fIesect\fR : 
-         \fIecyl\fR : \fIrsect\fR : \fInumsect\fR] 
+\fBfdisk\fR [\fB-o\fR \fIoffset\fR] [\fB-s\fR \fIsize\fR] [\fB-P\fR \fIfill_patt\fR] [\fB-S\fR \fIgeom_file\fR]
+     [\fB-w\fR | \fB-r\fR | \fB-d\fR | \fB-n\fR | \fB-I\fR | \fB-B\fR | \fB-t\fR | \fB-T\fR | \fB-g\fR | \fB-G\fR | \fB-R\fR | \fB-E\fR]
+     [-\fB-F\fR \fIfdisk_file\fR] [ [\fB-v\fR] \fB-W\fR {\fIfdisk_file\fR | \(mi}]
+     [\fB-h\fR] [\fB-b\fR \fImasterboot\fR]
+     [\fB-A\fR \fIid\fR : \fIact\fR : \fIbhead\fR : \fIbsect\fR : \fIbcyl\fR : \fIehead\fR : \fIesect\fR :
+         \fIecyl\fR : \fIrsect\fR : \fInumsect\fR]
      [\fB-D\fR \fIid\fR : \fIact\fR : \fIbhead:\fR \fIbsect\fR : \fIbcyl\fR : \fIehead:\fR \fIesect\fR :
          \fIecyl\fR : \fIrsect\fR : \fInumsect\fR] \fIrdevice\fR
 .fi
@@ -102,7 +102,6 @@ metadata.
 The menu options for interactive mode given by the \fBfdisk\fR program are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCreate a partition\fR\fR
 .ad
@@ -121,7 +120,6 @@ fit, a message is displayed and the program returns to the original menu.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBChange Active (Boot from) partition\fR\fR
 .ad
@@ -134,7 +132,6 @@ bootstrap will look for the second-stage bootstrap, otherwise known as the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDelete a partition\fR\fR
 .ad
@@ -146,7 +143,6 @@ this will destroy all data in that partition.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBChange between Solaris and Solaris2 Partition IDs\fR\fR
 .ad
@@ -159,7 +155,6 @@ in the disk partition and is provided for compatibility with older software.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEdit/View extended partitions\fR\fR
 .ad
@@ -174,12 +169,10 @@ the list of options that the extended partition submenu supports. Given below
 is the list:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBa\fR\fR
 .ad
 .RS 5n
-.rt  
 Add a logical drive.
 .sp
 Use this submenu option to add a logical drive. There are three pieces of
@@ -191,12 +184,10 @@ list the supported partitions.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBd\fR\fR
 .ad
 .RS 5n
-.rt  
 Delete a logical drive.
 .sp
 Use this submenu option to delete a logical drive. The only input required is
@@ -205,12 +196,10 @@ the number of the logical drive that is to be deleted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBh\fR\fR
 .ad
 .RS 5n
-.rt  
 Display the help menu.
 .sp
 This submenu option displays the supported operations in the extended partition
@@ -219,12 +208,10 @@ submenu.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBi\fR\fR
 .ad
 .RS 5n
-.rt  
 Change the id of the logical drive.
 .sp
 Use this submenu option to change the system ID of the existing logical drives.
@@ -234,12 +221,10 @@ when in this submenu.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBp\fR\fR
 .ad
 .RS 5n
-.rt  
 Display the logical drive layout.
 .sp
 Displays the logical drive information to stdout. This output reflects any
@@ -250,12 +235,10 @@ not committed to the disk until return to the main menu (using the submenu
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBr\fR\fR
 .ad
 .RS 5n
-.rt  
 Return to the main \fBfdisk\fR menu.
 .sp
 Exit the extended partition submenu and return to the main menu.
@@ -269,24 +252,20 @@ Use the following options to include your modifications to the partition table
 at this time or to cancel the session without modifying the table:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBExit\fR\fR
 .ad
 .RS 10n
-.rt  
 This option writes the new version of the table created during this session
 with \fBfdisk\fR out to the fixed disk, and exits the program.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCancel\fR\fR
 .ad
 .RS 10n
-.rt  
 This option exits without modifying the partition table.
 .RE
 
@@ -296,7 +275,6 @@ This option exits without modifying the partition table.
 The following options apply to \fBfdisk\fR:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR \fIid:act:bhead:bsect:bcyl:ehead:esect:ecyl:rsect:numsect\fR\fR
 .ad
@@ -309,7 +287,6 @@ partition if the \fBfdisk\fR table changes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR \fImaster_boot\fR\fR
 .ad
@@ -321,7 +298,6 @@ master boot program is \fB/usr/lib/fs/ufs/mboot\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-B\fR\fR
 .ad
@@ -334,7 +310,6 @@ partition will be limited to 2 TB.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -347,7 +322,6 @@ with \fB-F\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR \fIid:act:bhead:bsect:bcyl:ehead:esect:ecyl:rsect:numsect\fR\fR
 .ad
@@ -361,7 +335,6 @@ Solaris partition if the \fBfdisk\fR table changes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-E\fR\fR
 .ad
@@ -372,7 +345,6 @@ Create an \fBEFI\fR partition that uses the entire disk.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fIfdisk_file\fR\fR
 .ad
@@ -396,24 +368,20 @@ whitespace or colons, and have the following format:
 \&...where the entries have the following values:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIid\fR\fR
 .ad
 .RS 11n
-.rt  
 This is the type of partition and the correct numeric values may be found in
 \fBfdisk.h\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIact\fR\fR
 .ad
 .RS 11n
-.rt  
 This is the active partition flag; \fB0\fR means not active and \fB128\fR means
 active. For logical drives, this flag will always be set to 0 even if specified
 as 128 by the user.
@@ -421,84 +389,70 @@ as 128 by the user.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIbhead\fR\fR
 .ad
 .RS 11n
-.rt  
 This is the head where the partition starts. If this is set to \fB0\fR,
 \fBfdisk\fR will correctly fill this in from other information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIbsect\fR\fR
 .ad
 .RS 11n
-.rt  
 This is the sector where the partition starts. If this is set to \fB0\fR,
 \fBfdisk\fR will correctly fill this in from other information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIbcyl\fR\fR
 .ad
 .RS 11n
-.rt  
 This is the cylinder where the partition starts. If this is set to \fB0\fR,
 \fBfdisk\fR will correctly fill this in from other information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIehead\fR\fR
 .ad
 .RS 11n
-.rt  
 This is the head where the partition ends. If this is set to \fB0\fR,
 \fBfdisk\fR will correctly fill this in from other information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIesect\fR\fR
 .ad
 .RS 11n
-.rt  
 This is the sector where the partition ends. If this is set to \fB0\fR,
 \fBfdisk\fR will correctly fill this in from other information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIecyl\fR\fR
 .ad
 .RS 11n
-.rt  
 This is the cylinder where the partition ends. If this is set to \fB0\fR,
 \fBfdisk\fR will correctly fill this in from other information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIrsect\fR\fR
 .ad
 .RS 11n
-.rt  
 The relative sector from the beginning of the disk where the partition starts.
 This must be specified and can be used by \fBfdisk\fR to fill in other fields.
 For logical drives, you must make sure that there are at least 63 free sectors
@@ -507,12 +461,10 @@ before the \fIrsect\fR specified for a logical drive.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fInumsect\fR\fR
 .ad
 .RS 11n
-.rt  
 The size in sectors of this disk partition. This must be specified and can be
 used by \fBfdisk\fR to fill in other fields.
 .RE
@@ -521,7 +473,6 @@ used by \fBfdisk\fR to fill in other fields.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR\fR
 .ad
@@ -533,7 +484,6 @@ for the format).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-G\fR\fR
 .ad
@@ -545,7 +495,6 @@ option for the format).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -557,7 +506,6 @@ for each.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR\fR
 .ad
@@ -570,7 +518,6 @@ option (see above).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -584,7 +531,6 @@ mode if the \fB-n\fR option is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIoffset\fR\fR
 .ad
@@ -596,7 +542,6 @@ and \fB-w\fR. Zero is assumed when this option is not used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIfill_patt\fR\fR
 .ad
@@ -610,7 +555,6 @@ as long words and fills each block (see \fB-o\fR and \fB-s\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -622,7 +566,6 @@ the starting point and size of the operation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR\fR
 .ad
@@ -633,7 +576,6 @@ Treat disk as read-only. This is for testing purposes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsize\fR\fR
 .ad
@@ -644,7 +586,6 @@ Number of blocks to perform operation on (see \fB-o\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR \fIgeom_file\fR\fR
 .ad
@@ -667,78 +608,64 @@ format:
 where the entries have the following values:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpcyl\fR\fR
 .ad
 .RS 12n
-.rt  
 This is the number of physical cylinders for the drive.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIncyl\fR\fR
 .ad
 .RS 12n
-.rt  
 This is the number of usable cylinders for the drive.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIacyl\fR\fR
 .ad
 .RS 12n
-.rt  
 This is the number of alt cylinders for the drive.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIbcyl\fR\fR
 .ad
 .RS 12n
-.rt  
 This is the number of offset cylinders for the drive (should be zero).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fInheads\fR\fR
 .ad
 .RS 12n
-.rt  
 The number of heads for this drive.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fInsectors\fR\fR
 .ad
 .RS 12n
-.rt  
 The number of sectors per track.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsectsiz\fR\fR
 .ad
 .RS 12n
-.rt  
 The size in bytes of a sector.
 .RE
 
@@ -746,7 +673,6 @@ The size in bytes of a sector.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
@@ -758,7 +684,6 @@ table boundaries.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR\fR
 .ad
@@ -769,7 +694,6 @@ Remove incorrect slice table entries that span partition table boundaries.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -782,7 +706,6 @@ support virtual geometry. (x86 only)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR\fR
 .ad
@@ -794,7 +717,6 @@ starting point and size of the operation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-W\fR \fB\(mi\fR\fR
 .ad
@@ -805,7 +727,6 @@ Output the disk table to \fBstdout\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-W\fR \fIfdisk_file\fR\fR
 .ad
@@ -818,23 +739,19 @@ with the \fB-F\fR option below.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/rdsk/c0t0d0p0\fR\fR
 .ad
 .RS 25n
-.rt  
 Raw device associated with the fixed disk.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/fs/ufs/mboot\fR\fR
 .ad
 .RS 25n
-.rt  
 Default master boot program.
 .RE
 
@@ -846,13 +763,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Architecturex86 and SPARC
+Architecture	x86 and SPARC
 .TE
 
 .SH SEE ALSO
@@ -867,7 +783,6 @@ Most messages will be self-explanatory. The following may appear immediately
 after starting the program:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFdisk\fR: \fBcannot open\fR <\fBdevice\fR>\fR
 .ad
@@ -878,7 +793,6 @@ This indicates that the device name argument is not valid.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFdisk\fR: \fBunable to get device parameters for device\fR
 <\fBdevice\fR>\fR
@@ -891,7 +805,6 @@ in the fixed disk driver.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFdisk\fR: \fBerror reading partition table\fR\fR
 .ad
@@ -904,7 +817,6 @@ the configuration of the fixed disk.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFdisk\fR: \fBerror writing boot record\fR\fR
 .ad
diff --git a/usr/src/man/man1m/ff.1m b/usr/src/man/man1m/ff.1m
index 757955064f..98673c9ad1 100644
--- a/usr/src/man/man1m/ff.1m
+++ b/usr/src/man/man1m/ff.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ff 1M "10 Feb 1997" "SunOS 5.11" "System Administration Commands"
+.TH FF 1M "Feb 10, 1997"
 .SH NAME
 ff \- list file names and statistics for a file system
 .SH SYNOPSIS
@@ -38,12 +38,10 @@ The maximum information the command will provide is:
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fR
 .ad
 .RS 19n
-.rt  
 Specify the  \fIFSType\fR on which to operate. The  \fIFSType\fR should either
 be specified here or be determinable from  \fB/etc/vfstab\fR by matching the
 \fIspecial\fR with an entry in the table, or by consulting
@@ -52,12 +50,10 @@ be specified here or be determinable from  \fB/etc/vfstab\fR by matching the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
 .RS 19n
-.rt  
 Echo the complete command line, but do not execute the command. The command
 line is generated by using the options and arguments provided by the user and
 adding to them information derived from  \fB/etc/vfstab\fR. This option may be
@@ -66,123 +62,101 @@ used to verify and validate the command line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIgeneric_options\fR\fR
 .ad
 .RS 19n
-.rt  
 Options that are supported by most FSType-specific modules of the command.  The
 following options are available:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR\fR
 .ad
 .RS 18n
-.rt  
 Do not print the i-node number after each path name.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 18n
-.rt  
 Generate a supplementary list of all path names for multiply-linked files.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fI prefix\fR\fR
 .ad
 .RS 18n
-.rt  
 The specified \fIprefix\fR will be added to each generated path name. The
 default is `.' (dot).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 18n
-.rt  
 Print the file size, in bytes, after each path name.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
 .RS 18n
-.rt  
 Print the owner's login name after each path name.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fB-\fR\fIn\fR\fR
 .ad
 .RS 18n
-.rt  
 Select if the file has been accessed in \fIn\fR days.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fB-\fR\fIn\fR\fR
 .ad
 .RS 18n
-.rt  
 Select if the file has been written or created in \fIn\fR days.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fB-\fR\fIn\fR\fR
 .ad
 .RS 18n
-.rt  
 Select if file's status has been changed in \fIn\fR days.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fI file\fR\fR
 .ad
 .RS 18n
-.rt  
 Select if the file has been modified more recently than the argument
 \fBfile\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fI i-node-list\fR\fR
 .ad
 .RS 18n
-.rt  
 Generate names for only those i-nodes specified in \fIi-node-list\fR.
 \fIi-node-list\fR is a list of numbers separated by commas (with no intervening
 spaces).
@@ -192,12 +166,10 @@ spaces).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 19n
-.rt  
 Specify  \fIFSType\fR-specific options in a comma separated (without spaces)
 list of suboptions and keyword-attribute pairs for interpretation by the
 \fIFSType\fR-specific module of the command.
@@ -206,12 +178,10 @@ list of suboptions and keyword-attribute pairs for interpretation by the
 .SH OPERANDS
 .sp
 .ne 2
-.mk
 .na
 \fB\fIspecial\fR\fR
 .ad
 .RS 11n
-.rt  
 A special device.
 .RE
 
@@ -223,22 +193,18 @@ encountering files greater than or equal to 2 Gbyte ( 2^31 bytes).
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/fs\fR\fR
 .ad
 .RS 19n
-.rt  
 default local file system type. Default values can be set for the following
 flags in \fB/etc/default/fs\fR. For example: \fBLOCAL=ufs\fR
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLOCAL\fR\fR
 .ad
 .RS 9n
-.rt  
 The default partition for a command if no FSType is specified.
 .RE
 
@@ -246,12 +212,10 @@ The default partition for a command if no FSType is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vfstab\fR\fR
 .ad
 .RS 19n
-.rt  
 list of default parameters for each file system
 .RE
 
diff --git a/usr/src/man/man1m/ff_ufs.1m b/usr/src/man/man1m/ff_ufs.1m
index d1e9da2f9d..e0b9801065 100644
--- a/usr/src/man/man1m/ff_ufs.1m
+++ b/usr/src/man/man1m/ff_ufs.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ff_ufs 1M "10 Feb 1997" "SunOS 5.11" "System Administration Commands"
+.TH FF_UFS 1M "Feb 10, 1997"
 .SH NAME
 ff_ufs \- list file names and statistics for a ufs file system
 .SH SYNOPSIS
@@ -27,45 +27,37 @@ See  \fBff\fR(1M) for information regarding the \fBff\fR command. See
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 6n
-.rt  
 Specify \fBufs\fR file system specific options. The following options available
 are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBa\fR\fR
 .ad
 .RS 5n
-.rt  
 Print the `\fI\&.\fR' and `\fI\&.\|.\fR' directory entries.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBm\fR\fR
 .ad
 .RS 5n
-.rt  
 Print mode information.  This option must be specified in conjunction with the
 \fB\fR\fB-i\fR\fB \fR\fIi-node-list\fR option (see \fBff\fR(1M)).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBs\fR\fR
 .ad
 .RS 5n
-.rt  
 Print only special files and files with set-user-ID mode.
 .RE
 
diff --git a/usr/src/man/man1m/fiocompress.1m b/usr/src/man/man1m/fiocompress.1m
index 4c013cc706..df18c346a2 100644
--- a/usr/src/man/man1m/fiocompress.1m
+++ b/usr/src/man/man1m/fiocompress.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fiocompress 1M "10 Dec 2008" "SunOS 5.11" "System Administration Commands"
+.TH FIOCOMPRESS 1M "Dec 10, 2008"
 .SH NAME
 fiocompress \- file compression utility
 .SH SYNOPSIS
@@ -34,7 +34,6 @@ Note that this utility is not a Committed interface. See \fBattributes\fR(5).
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR \fIblock_size\fR\fR
 .ad
@@ -45,7 +44,6 @@ Specify a block size for compression. The default block size is 8192.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
@@ -56,7 +54,6 @@ Compress the specified file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -67,7 +64,6 @@ Decompress the specified file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
@@ -80,7 +76,6 @@ in conjunction with \fB-c\fR.
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -91,7 +86,6 @@ The command completed successfully.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-1\fR\fR
 .ad
@@ -108,13 +102,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityPrivate
+Interface Stability	Private
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/flowadm.1m b/usr/src/man/man1m/flowadm.1m
index a0d2e936f6..b12ce6af96 100644
--- a/usr/src/man/man1m/flowadm.1m
+++ b/usr/src/man/man1m/flowadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH flowadm 1M "14 Feb 2009" "SunOS 5.11" "System Administration Commands"
+.TH FLOWADM 1M "Feb 14, 2009"
 .SH NAME
 flowadm \- administer bandwidth resource control and priority for protocols,
 services, containers, and virtual machines
@@ -76,7 +76,6 @@ options. Options are described in the context of each subcommand.
 The following subcommands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBflowadm show-flow\fR [\fB-pP\fR] [\fB-s\fR [\fB-i\fR \fIinterval\fR]]
 [\fB-o\fR \fIfield\fR[,...]] [\fB-l\fR \fIlink\fR] [\fIflow\fR]\fR
@@ -87,7 +86,6 @@ Show flow configuration information (the default) or statistics, either for all
 flows, all flows on a link, or for the specified \fIflow\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIfield\fR[,...]\fR
 .ad
@@ -98,7 +96,6 @@ name must be one of the fields listed below, or a special value \fBall\fR, to
 display all fields. For each flow found, the following fields can be displayed:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBflow\fR\fR
 .ad
@@ -109,7 +106,6 @@ The name of the flow.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlink\fR\fR
 .ad
@@ -120,7 +116,6 @@ The name of the link the flow is on.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipaddr\fR\fR
 .ad
@@ -132,7 +127,6 @@ flow was defined.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtransport\fR\fR
 .ad
@@ -143,7 +137,6 @@ The name of the layer for protocol to be used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBport\fR\fR
 .ad
@@ -154,7 +147,6 @@ Local port of service for flow.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdsfield\fR\fR
 .ad
@@ -169,7 +161,6 @@ header.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR, \fB--parseable\fR\fR
 .ad
@@ -180,7 +171,6 @@ Display using a stable machine-parseable format.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR, \fB--persistent\fR\fR
 .ad
@@ -191,7 +181,6 @@ Display persistent flow property information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR, \fB--continuous\fR\fR
 .ad
@@ -203,7 +192,6 @@ that \fBprstat\fR(1M) displays CPU utilization by process.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR, \fB--statistics\fR\fR
 .ad
@@ -214,7 +202,6 @@ Displays flow statistics.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIinterval\fR, \fB--interval\fR=\fIinterval\fR\fR
 .ad
@@ -227,7 +214,6 @@ displayed once.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlink\fR, \fB--link\fR=\fIlink\fR | \fIflow\fR\fR
 .ad
@@ -241,7 +227,6 @@ named flow.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBflowadm add-flow\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] \fB-l\fR
 \fIlink\fR \fB-a\fR \fIattr\fR=\fIvalue\fR[,...] \fB-p\fR
@@ -260,7 +245,6 @@ supported), so that the selected traffic can be separated from others and can
 flow with minimal impact from other traffic.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--temporary\fR\fR
 .ad
@@ -272,7 +256,6 @@ the default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -284,7 +267,6 @@ persistent creation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlink\fR, \fB--link\fR=\fIlink\fR\fR
 .ad
@@ -295,7 +277,6 @@ Specify the link to which the flow will be added.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIattr\fR=\fIvalue\fR[,...], \fB--attr\fR=\fIvalue\fR\fR
 .ad
@@ -306,7 +287,6 @@ A comma-separated list of attributes to be set to the specified values.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIprop\fR=\fIvalue\fR[,...], \fB--prop\fR=\fIvalue\fR[,...]\fR
 .ad
@@ -319,7 +299,6 @@ A comma-separated list of properties to be set to the specified values.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBflowadm remove-flow\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] \fB-l\fR
 {\fIlink\fR | \fIflow\fR}\fR
@@ -329,7 +308,6 @@ A comma-separated list of properties to be set to the specified values.
 Remove an existing flow identified by its link or name.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--temporary\fR\fR
 .ad
@@ -341,7 +319,6 @@ the default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -353,7 +330,6 @@ persistent removal.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlink\fR | \fIflow\fR, \fB--link\fR=\fIlink\fR | \fIflow\fR\fR
 .ad
@@ -367,7 +343,6 @@ specified, remove only that flow.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBflowadm set-flowprop\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] \fB-p\fR
 \fIprop\fR=\fIvalue\fR[,...] \fIflow\fR\fR
@@ -379,7 +354,6 @@ complete list of properties can be retrieved using the \fBshow-flow\fR
 subcommand.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--temporary\fR\fR
 .ad
@@ -391,7 +365,6 @@ the default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -403,7 +376,6 @@ persistent setting of properties.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIprop\fR=\fIvalue\fR[,...], \fB--prop\fR=\fIvalue\fR[,...]\fR
 .ad
@@ -416,7 +388,6 @@ A comma-separated list of properties to be set to the specified values.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBflowadm reset-flowprop\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] \fB-p\fR
 [\fIprop\fR=\fIvalue\fR[,...]] \fIflow\fR\fR
@@ -429,7 +400,6 @@ no properties are specified, all properties are reset. See the
 their default values.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--temporary\fR\fR
 .ad
@@ -441,7 +411,6 @@ reboot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
 .ad
@@ -453,7 +422,6 @@ persistent setting of properties.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIprop\fR=\fIvalue\fR[,...], \fB--prop\fR=\fIvalue\fR[,...]\fR
 .ad
@@ -466,7 +434,6 @@ A comma-separated list of properties to be reset.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBflowadm show-flowprop\fR [\fB-cP\fR] [\fB-l\fR \fIlink\fR] [\fB-p\fR
 \fIprop\fR[,...]] [\fIflow\fR]\fR
@@ -481,7 +448,6 @@ available flow properties are displayed. For each property, the following
 fields are displayed:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFLOW\fR\fR
 .ad
@@ -492,7 +458,6 @@ The name of the flow.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPROPERTY\fR\fR
 .ad
@@ -503,7 +468,6 @@ The name of the property.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBVALUE\fR\fR
 .ad
@@ -517,7 +481,6 @@ unknown. Persistent values that are not set or have been reset will be shown as
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDEFAULT\fR\fR
 .ad
@@ -529,7 +492,6 @@ The default value of the property. If the property has no default value,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPOSSIBLE\fR\fR
 .ad
@@ -544,7 +506,6 @@ shown.
 Flow properties are documented in the "Flow Properties" section, below.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR, \fB--parseable\fR\fR
 .ad
@@ -555,7 +516,6 @@ Display using a stable machine-parseable format.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR, \fB--persistent\fR\fR
 .ad
@@ -566,7 +526,6 @@ Display persistent flow property information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIprop\fR[,...], \fB--prop\fR=\fIprop\fR[,...]\fR
 .ad
@@ -579,7 +538,6 @@ A comma-separated list of properties to show.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBflowadm show-usage\fR [\fB-a\fR] [\fB-d\fR | {\fB-p\fR \fIplotfile\fR
 \fB-F\fR \fIformat\fR}] [\fB-s\fR \fItime\fR] [\fB-e\fR \fItime\fR]
@@ -593,7 +551,6 @@ required. The default output will be the summary of flow usage for the entire
 period of time in which extended accounting was enabled.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -606,7 +563,6 @@ the flows that have already been deleted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -618,7 +574,6 @@ format \fIDD\fR/\fIMM\fR/\fIYYYY\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fIformat\fR\fR
 .ad
@@ -630,7 +585,6 @@ option. As of this release, \fBgnuplot\fR is the only supported format.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIplotfile\fR\fR
 .ad
@@ -642,7 +596,6 @@ a file of the format specified by the \fB-F\fR option, which is required.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fItime\fR, \fB-e\fR \fItime\fR\fR
 .ad
@@ -654,7 +607,6 @@ Start and stop times for data display. Time is in the format
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfilename\fR\fR
 .ad
@@ -665,7 +617,6 @@ Read extended accounting records of network flow usage from \fIfilename\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIflow\fR\fR
 .ad
@@ -684,7 +635,6 @@ The flow operand that identify a flow in a \fBflowadm\fR command is a
 comma-separated list of one or more keyword, value pairs from the list below.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlocal_ip\fR[\fB/\fR\fIprefix_len\fR]\fR
 .ad
@@ -703,7 +653,6 @@ address is \fB/32\fR and for IPv6 is \fB/128\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremote_ip\fR[\fB/\fR\fIprefix_len\fR]\fR
 .ad
@@ -715,7 +664,6 @@ Identifies a network flow by the remote IP address. The syntax is the same as
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtransport\fR={\fBtcp\fR|\fBudp\fR|\fBsctp\fR|\fBicmp\fR|\fBicmpv6\fR}\fR
 .ad
@@ -727,7 +675,6 @@ with local_port to identify the service that needs special attention.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlocal_port\fR\fR
 .ad
@@ -738,7 +685,6 @@ Identifies a service specified by the local port.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdsfield\fR[\fB:\fR\fIdsfield_mask\fR]\fR
 .ad
@@ -837,7 +783,6 @@ The following flow properties are supported. Note that the ability to set a
 given property to a given value depends on the driver and hardware.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmaxbw\fR\fR
 .ad
@@ -851,7 +796,6 @@ Mbps. The default is no bandwidth limit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpriority\fR\fR
 .ad
@@ -1035,7 +979,6 @@ Output the same information as above as a plotfile:
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -1046,7 +989,6 @@ All actions were performed successfully.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
@@ -1063,13 +1005,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/fmadm.1m b/usr/src/man/man1m/fmadm.1m
index 36fa029db3..88a71c3707 100644
--- a/usr/src/man/man1m/fmadm.1m
+++ b/usr/src/man/man1m/fmadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fmadm 1M "22 Oct 2008" "SunOS 5.11" "System Administration Commands"
+.TH FMADM 1M "Oct 22, 2008"
 .SH NAME
 fmadm \- fault management configuration tool
 .SH SYNOPSIS
@@ -67,7 +67,6 @@ user possess all privileges.
 or require additional options and operands:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfmadm acquit\fR \fIfmri\fR \fB|\fR \fIlabel\fR [\fIuuid\fR]\fR
 .ad
@@ -83,7 +82,6 @@ re-enable a previously faulted resource.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfmadm acquit\fR \fIuuid\fR\fR
 .ad
@@ -97,7 +95,6 @@ apply additional commands to re-enable any previously faulted resources.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfmadm config\fR\fR
 .ad
@@ -111,7 +108,6 @@ hardware and software present on the system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfmadm faulty\fR [\fB-afgiprsv\fR] [\fB-n\fR \fImax\fR] [\fB-u\fR
 \fIuid\fR]\fR
@@ -124,12 +120,10 @@ believes to be faulty.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 10n
-.rt  
 Display all faults. By default, the \fBfmadm faulty\fR command only lists
 output for resources that are currently present and faulty. If you specify the
 \fB-a\fR option, all resource information cached by the Fault Manager is
@@ -140,102 +134,84 @@ might no longer be present in the system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 10n
-.rt  
 Display faulty \fBfru's\fR (Field replaceable units).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR\fR
 .ad
 .RS 10n
-.rt  
 Group together faults which have the same fru, class and fault message.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 10n
-.rt  
 Display persistent cache identifier for each resource in the Fault Manager.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fImax\fR\fR
 .ad
 .RS 10n
-.rt  
 If faults or resources are grouped together with the \fB-a\fR or \fB-g\fR
 options, limit the output to \fImax\fR entries.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 10n
-.rt  
 Pipe output through pager with form feed between each fault.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 10n
-.rt  
 Display Fault Management Resource with their Identifier (FMRI) and their fault
 management state.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 10n
-.rt  
 Display 1 line fault summary for each fault event.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIuid\fR\fR
 .ad
 .RS 10n
-.rt  
 Only display fault with given \fBuid\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 10n
-.rt  
 Display full output.
 .RE
 
@@ -252,7 +228,6 @@ The Fault Manager associates the following states with every resource for which
 telemetry information has been received:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBok\fR\fR
 .ad
@@ -264,7 +239,6 @@ Fault Manager is concerned.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunknown\fR\fR
 .ad
@@ -277,7 +251,6 @@ Consult appropriate management tools for more information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfaulted\fR\fR
 .ad
@@ -290,7 +263,6 @@ further damage to the system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdegraded\fR\fR
 .ad
@@ -306,7 +278,6 @@ affected resource.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfmadm flush\fR \fIfmri\fR\fR
 .ad
@@ -322,7 +293,6 @@ additional commands to enable the specified resource.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfmadm load\fR \fIpath\fR\fR
 .ad
@@ -336,7 +306,6 @@ Manager loads modules automatically when Solaris initially boots or as needed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfmadm unload\fR \fImodule\fR\fR
 .ad
@@ -350,7 +319,6 @@ automatically based on the system configuration
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfmadm repaired\fR \fIfmri\fR \fB|\fR \fIlabel\fR\fR
 .ad
@@ -364,7 +332,6 @@ to apply additional commands to re-enable a previously faulted resource.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfmadm replaced\fR \fIfmri\fR \fB|\fR \fIlabel\fR\fR
 .ad
@@ -380,7 +347,6 @@ previously faulted resource.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfmadm reset\fR [\fB-s\fR \fIserd\fR\fB]\fR \fImodule\fR\fR
 .ad
@@ -397,7 +363,6 @@ necessary as the Fault Manager manages its modules automatically.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfmadm rotate\fR \fBerrlog | fltlog\fR\fR
 .ad
@@ -424,12 +389,10 @@ logfile to be rotated, if the current one is not zero in size:
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
 .RS 6n
-.rt  
 Set quiet mode. \fBfmadm\fR does not produce messages indicating the result of
 successful operations to standard output.
 .RE
@@ -440,23 +403,19 @@ successful operations to standard output.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcmd\fR\fR
 .ad
 .RS 8n
-.rt  
 The name of a subcommand listed in \fBSUBCOMMANDS\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIargs\fR\fR
 .ad
 .RS 8n
-.rt  
 One or more options or arguments appropriate for the selected \fIsubcommand\fR,
 as described in \fBSUBCOMMANDS\fR.
 .RE
@@ -467,35 +426,29 @@ as described in \fBSUBCOMMANDS\fR.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 An error occurred. Errors include a failure to communicate with \fBfmd\fR or
 insufficient privileges to perform the requested operation.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Invalid command-line options were specified.
 .RE
 
@@ -507,13 +460,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/fmd.1m b/usr/src/man/man1m/fmd.1m
index e43ce725c8..2406727670 100644
--- a/usr/src/man/man1m/fmd.1m
+++ b/usr/src/man/man1m/fmd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fmd 1M "17 Nov 2004" "SunOS 5.11" "System Administration Commands"
+.TH FMD 1M "Nov 17, 2004"
 .SH NAME
 fmd \- fault manager daemon
 .SH SYNOPSIS
@@ -43,24 +43,20 @@ Solaris.
 The following options are supported
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfile\fR\fR
 .ad
 .RS 16n
-.rt  
 Read the specified configuration \fIfile\fR prior to searching for any of the
 default fault manager configuration files.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIopt\fR\fB=\fR\fIvalue\fR\fR
 .ad
 .RS 16n
-.rt  
 Set the specified fault manager option to the specified value. Fault manager
 options are currently a Private interface; see \fBattributes\fR(5) for
 information about Private interfaces.
@@ -68,24 +64,20 @@ information about Private interfaces.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIdir\fR\fR
 .ad
 .RS 16n
-.rt  
 Use the specified root directory for all pathnames evaluated by the fault
 manager, instead of the default root (\fB/\fR).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
 .RS 16n
-.rt  
 Print the fault manager's version to stdout and exit.
 .RE
 
@@ -95,69 +87,57 @@ Print the fault manager's version to stdout and exit.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR \fR
 .ad
 .RS 6n
-.rt  
 Successful completion
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred which prevented the fault manager from initializing, such as
 failure to open the telemetry transport.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 6n
-.rt  
 Invalid command-line options were specified.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/fm/fmd\fR \fR
 .ad
 .RS 20n
-.rt  
 Fault manager configuration directory
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/fm/fmd\fR \fR
 .ad
 .RS 20n
-.rt  
 Fault manager library directory
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/fm/fmd\fR\fR
 .ad
 .RS 20n
-.rt  
 Fault manager log directory
 .RE
 
@@ -169,13 +149,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/fmdump.1m b/usr/src/man/man1m/fmdump.1m
index f4c6f253af..0cfdd6393f 100644
--- a/usr/src/man/man1m/fmdump.1m
+++ b/usr/src/man/man1m/fmdump.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fmdump 1M "14 Apr 2009" "SunOS 5.11" "System Administration Commands"
+.TH FMDUMP 1M "Apr 14, 2009"
 .SH NAME
 fmdump \- fault management log viewer
 .SH SYNOPSIS
 .LP
 .nf
-\fBfmdump\fR [\fB-efmvV\fR] [\fB-c\fR \fIclass\fR] [\fB-R\fR \fIdir\fR] [\fB-t\fR \fItime\fR] [\fB-T\fR \fItime\fR] 
+\fBfmdump\fR [\fB-efmvV\fR] [\fB-c\fR \fIclass\fR] [\fB-R\fR \fIdir\fR] [\fB-t\fR \fItime\fR] [\fB-T\fR \fItime\fR]
      [\fB-u\fR \fIuid\fR] [\fB-n\fR \fIname\fR[.\fIname\fR]*[=\fIvalue\fR]] [\fIfile\fR]
 .fi
 
@@ -28,24 +28,20 @@ The Fault Manager maintains two sets of log files for use by administrators and
 service personnel:
 .sp
 .ne 2
-.mk
 .na
 \fBerror log\fR
 .ad
 .RS 13n
-.rt  
 A log which records error telemetry, the symptoms of problems detected by the
 system.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBfault log\fR
 .ad
 .RS 13n
-.rt  
 A log which records fault diagnosis information, the problems believed to
 explain these symptoms.
 .RE
@@ -133,7 +129,6 @@ or after 02Dec03).
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIclass\fR\fR
 .ad
@@ -148,7 +143,6 @@ http://www.sun.com/msg/.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
@@ -166,7 +160,6 @@ relied upon for the development of scripts and other tools. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -180,7 +173,6 @@ terminated at any time by sending an interrupt (\fBControl-C\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
@@ -192,7 +184,6 @@ log.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fIname\fR[.\fIname\fR]*[=\fIvalue\fR]\fR
 .ad
@@ -218,7 +209,6 @@ value can be octal, hex, or decimal.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIdir\fR\fR
 .ad
@@ -230,7 +220,6 @@ instead of the default root (\fB/\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fItime\fR\fR
 .ad
@@ -240,7 +229,6 @@ Select events that occurred at or after the specified time. The time can be
 specified using any of the following forms:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fImm\fR/\fIdd\fR/\fIyy hh\fR:\fImm\fR:\fIss\fR\fR\fR
 .ad
@@ -253,7 +241,6 @@ that the shell interprets the two strings as a single argument.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fImm\fR/\fIdd\fR/\fIyy hh\fR:\fImm\fR\fR\fR
 .ad
@@ -266,7 +253,6 @@ interprets the two strings as a single argument.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fImm\fR/\fIdd\fR/\fIyy\fR\fR\fR
 .ad
@@ -277,7 +263,6 @@ interprets the two strings as a single argument.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fIddMonyy hh\fR:\fImm\fR:\fIss\fR\fR\fR
 .ad
@@ -290,7 +275,6 @@ that the shell interprets the two strings as a single argument.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fIddMonyy hh\fR:\fImm\fR\fR\fR
 .ad
@@ -303,7 +287,6 @@ that the shell interprets the two strings as a single argument.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fIMon\fR \fIdd\fR \fIhh\fR:\fImm\fR:\fIss\fR\fR\fR
 .ad
@@ -314,7 +297,6 @@ Month, day, hour in 24-hour format, minute, and second of the current year.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fIyyyy\fR-\fImm\fR-\fIdd\fR [T \fIhh\fR:\fImm\fR[:\fIss\fR]]\fR\fR
 .ad
@@ -326,7 +308,6 @@ second, or hour, minute, and second, can be optionally omitted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIddMonyy\fR\fR
 .ad
@@ -337,7 +318,6 @@ second, or hour, minute, and second, can be optionally omitted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fIhh\fR:\fImm\fR:\fIss\fR\fR\fR
 .ad
@@ -348,7 +328,6 @@ Hour in 24-hour format, minute, and second of the current day.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fIhh\fR:\fImm\fR\fR\fR
 .ad
@@ -359,7 +338,6 @@ Hour in 24-hour format and minute of the current day.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIT\fR\fBns\fR | \fIT\fR\fBnsec\fR\fR
 .ad
@@ -370,7 +348,6 @@ Hour in 24-hour format and minute of the current day.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fIT\fRus |\fIT\fRusec\fR\fR
 .ad
@@ -381,7 +358,6 @@ Hour in 24-hour format and minute of the current day.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIT\fR\fBms\fR | \fIT\fR\fBmsec\fR\fR
 .ad
@@ -392,7 +368,6 @@ T milliseconds ago where T is an integer value specified in base 10.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fIT\fRs | \fIT\fRsec\fR\fR
 .ad
@@ -403,7 +378,6 @@ T seconds ago where \fIT\fR is an integer value specified in base 10.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fIT\fRm |\fIT\fRmin\fR\fR
 .ad
@@ -414,7 +388,6 @@ T seconds ago where \fIT\fR is an integer value specified in base 10.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fIT\fRh |\fIT\fRhour\fR\fR
 .ad
@@ -425,7 +398,6 @@ T seconds ago where \fIT\fR is an integer value specified in base 10.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fIT\fRd |\fIT\fRday\fR\fR
 .ad
@@ -441,7 +413,6 @@ time.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fItime\fR\fR
 .ad
@@ -453,7 +424,6 @@ specified using any of the time formats described for the \fB-t\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIuuid\fR\fR
 .ad
@@ -471,7 +441,6 @@ that are cross-referenced by the specified diagnosis are displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -483,7 +452,6 @@ common members of the selected events.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
@@ -501,12 +469,10 @@ corresponding errors that were associated with the diagnosis.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfile\fR\fR
 .ad
 .RS 8n
-.rt  
 Specifies an alternate log file to display instead of the system fault log. The
 \fBfmdump\fR utility determines the type of the specified log automatically and
 produces appropriate output for the selected log.
@@ -589,46 +555,38 @@ nvlist version: 0
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion. All records in the log file were examined successfully.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 A fatal error occurred. This prevented any log file data from being examined,
 such as failure to open the specified file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Invalid command-line options were specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 5n
-.rt  
 The log file was opened successfully, but one or more log file records were not
 displayed, either due to an I/O error or because the records themselves were
 malformed. \fBfmdump\fR issues a warning message for each record that could not
@@ -638,34 +596,28 @@ be displayed, and then continues on and attempts to display other records.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/fm/fmd\fR\fR
 .ad
 .RS 22n
-.rt  
 Fault management log directory
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/fm/fmd/errlog\fR\fR
 .ad
 .RS 22n
-.rt  
 Fault management error log
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/fm/fmd/fltlog\fR\fR
 .ad
 .RS 22n
-.rt  
 Fault management fault log
 .RE
 
@@ -677,13 +629,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/fmstat.1m b/usr/src/man/man1m/fmstat.1m
index e368e6ee1d..5c7c21f7a4 100644
--- a/usr/src/man/man1m/fmstat.1m
+++ b/usr/src/man/man1m/fmstat.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fmstat 1M "16 Jun 2009" "SunOS 5.11" "System Administration Commands"
+.TH FMSTAT 1M "Jun 16, 2009"
 .SH NAME
 fmstat \- report fault management module statistics
 .SH SYNOPSIS
@@ -38,124 +38,102 @@ If the \fB-m\fR option is not present, \fBfmstat\fR reports the following
 statistics for each of its client modules:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmodule\fR\fR
 .ad
 .RS 11n
-.rt  
 The name of the fault management module, as reported by \fBfmadm config\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBev_recv\fR\fR
 .ad
 .RS 11n
-.rt  
 The number of telemetry events received by the module.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBev_acpt\fR\fR
 .ad
 .RS 11n
-.rt  
 The number of events accepted by the module as relevant to a diagnosis.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwait\fR\fR
 .ad
 .RS 11n
-.rt  
 The average number of telemetry events waiting to be examined by the module.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsvc_t\fR\fR
 .ad
 .RS 11n
-.rt  
 The average service time for telemetry events received by the module, in
 milliseconds.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%w\fR\fR
 .ad
 .RS 11n
-.rt  
 The percentage of time that there were telemetry events waiting to be examined
 by the module.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%b\fR\fR
 .ad
 .RS 11n
-.rt  
 The percentage of time that the module was busy processing telemetry events.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBopen\fR\fR
 .ad
 .RS 11n
-.rt  
 The number of active cases (open problem investigations) owned by the module.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsolve\fR\fR
 .ad
 .RS 11n
-.rt  
 The total number of cases solved by this module since it was loaded.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmemsz\fR\fR
 .ad
 .RS 11n
-.rt  
 The amount of dynamic memory currently allocated by this module.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbufsz\fR\fR
 .ad
 .RS 11n
-.rt  
 The amount of persistent buffer space currently allocated by this module.
 .RE
 
@@ -170,12 +148,10 @@ Solaris privileges.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 13n
-.rt  
 Print all statistics for a module, including those kept on its behalf by
 \fBfmd\fR. If the \fB-a\fR option is not present, only those statistics kept by
 the module are reported. If the \fB-a\fR option is used without the \fB-m\fR
@@ -185,12 +161,10 @@ displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fBu\fR | \fBd\fR\fR
 .ad
 .RS 13n
-.rt  
 Display a time stamp.
 .sp
 Specify \fBu\fR for a printed representation of the internal representation of
@@ -200,12 +174,10 @@ time. See \fBtime\fR(2). Specify \fBd\fR for standard date format. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fImodule\fR\fR
 .ad
 .RS 13n
-.rt  
 Print a report on the statistics associated with the specified fault management
 module, instead of the default statistics report. Modules can publish an
 arbitrary set of statistics to help Sun service the fault management software
@@ -217,12 +189,10 @@ module statistics as they can change without notice.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 13n
-.rt  
 Print a report on Soft Error Rate Discrimination (SERD) engines associated with
 the module instead of the default module statistics report. A SERD engine is a
 construct used by fault management software to determine if a statistical
@@ -232,12 +202,10 @@ The \fB-s\fR option can only be used in combination with the \fB-m\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
 .RS 13n
-.rt  
 Print a report on the statistics associated with each fault management event
 transport. Each fault management module can provide the implementation of one
 or more event transports.
@@ -245,12 +213,10 @@ or more event transports.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR\fR
 .ad
 .RS 13n
-.rt  
 Print a table of the authority information associated with each fault
 management event transport. If the \fB-m\fR option is present, only transports
 associated with the specified module are displayed.
@@ -258,12 +224,10 @@ associated with the specified module are displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-z\fR\fR
 .ad
 .RS 13n
-.rt  
 Omit statistics with a zero value from the report associated with the specified
 fault management module. The \fB-z\fR option can only be used in combination
 with the \fB-m\fR option.
@@ -275,23 +239,19 @@ with the \fB-m\fR option.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcount\fR\fR
 .ad
 .RS 12n
-.rt  
 Print only count reports, and then exit.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIinterval\fR\fR
 .ad
 .RS 12n
-.rt  
 Print a new report every \fIinterval\fR seconds.
 .RE
 
@@ -307,23 +267,19 @@ seconds indefinitely until the command is interrupted.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 A fatal error occurred. A fatal error could be the failure to communicate with
 \fBfmd\fR(1M). It could also be that insufficient privileges were available to
 perform the requested operation.
@@ -331,12 +287,10 @@ perform the requested operation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Invalid command-line options were specified.
 .RE
 
@@ -348,13 +302,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/fmthard.1m b/usr/src/man/man1m/fmthard.1m
index 503d3d378e..ea8e7450dd 100644
--- a/usr/src/man/man1m/fmthard.1m
+++ b/usr/src/man/man1m/fmthard.1m
@@ -3,21 +3,21 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fmthard 1M "25 Sep 2008" "SunOS 5.11" "System Administration Commands"
+.TH FMTHARD 1M "Sep 25, 2008"
 .SH NAME
 fmthard \- populate label on hard disks
 .SH SYNOPSIS
 .SS "SPARC"
 .LP
 .nf
-\fBfmthard\fR \fB-d\fR \fIdata\fR | \fB-n\fR \fIvolume_name\fR | \fB-s\fR \fIdatafile\fR [\fB-i\fR] /dev/rdsk/c? 
+\fBfmthard\fR \fB-d\fR \fIdata\fR | \fB-n\fR \fIvolume_name\fR | \fB-s\fR \fIdatafile\fR [\fB-i\fR] /dev/rdsk/c?
      [t?] d?s2
 .fi
 
 .SS "x86"
 .LP
 .nf
-\fBfmthard\fR \fB-d\fR \fIdata\fR | \fB-n\fR \fIvolume_name\fR | \fB-s\fR \fIdatafile\fR [\fB-i\fR] /dev/rdsk/c? 
+\fBfmthard\fR \fB-d\fR \fIdata\fR | \fB-n\fR \fIvolume_name\fR | \fB-s\fR \fIdatafile\fR [\fB-i\fR] /dev/rdsk/c?
      [t?] d?s2
 .fi
 
@@ -45,7 +45,6 @@ by \fBfdisk\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdata\fR\fR
 .ad
@@ -62,7 +61,6 @@ of the \fIdatafile\fR below for more information on these fields.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
@@ -75,7 +73,6 @@ on the disk.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fIvolume_name\fR\fR
 .ad
@@ -87,7 +84,6 @@ long.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIdatafile\fR\fR
 .ad
@@ -116,7 +112,6 @@ separated by white space and having the following format:
 where the entries have the following values:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpartition\fR\fR
 .ad
@@ -131,7 +126,6 @@ slices \fB0\fR\(mi\fB15\fR. Each Solaris \fBfdisk\fR partition can have up to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fItag\fR\fR
 .ad
@@ -145,7 +139,6 @@ The partition tag: a decimal number. The following are reserved codes: \fB0\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIflag\fR\fR
 .ad
@@ -158,7 +151,6 @@ partitions use \fB0x00\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIstarting_sector\fR\fR
 .ad
@@ -169,7 +161,6 @@ The sector number (decimal) on which the partition starts.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsize_in_sectors\fR\fR
 .ad
diff --git a/usr/src/man/man1m/format.1m b/usr/src/man/man1m/format.1m
index a33e85ac7b..58b71a36e9 100644
--- a/usr/src/man/man1m/format.1m
+++ b/usr/src/man/man1m/format.1m
@@ -4,14 +4,14 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH format 1M "25 Sep 2008" "SunOS 5.11" "System Administration Commands"
+.TH FORMAT 1M "Sep 25, 2008"
 .SH NAME
 format \- disk partitioning and maintenance utility
 .SH SYNOPSIS
 .LP
 .nf
-\fBformat\fR [\fB-f\fR \fIcommand-file\fR] [\fB-l\fR \fIlog-file\fR] [\fB-x\fR \fIdata-file\fR] 
-     [\fB-d\fR \fIdisk-name\fR] [\fB-t\fR \fIdisk-type\fR] [\fB-p\fR \fIpartition-name\fR] 
+\fBformat\fR [\fB-f\fR \fIcommand-file\fR] [\fB-l\fR \fIlog-file\fR] [\fB-x\fR \fIdata-file\fR]
+     [\fB-d\fR \fIdisk-name\fR] [\fB-t\fR \fIdisk-type\fR] [\fB-p\fR \fIpartition-name\fR]
      [\fB-s\fR] [\fB-m\fR] [\fB-M\fR] [\fB-e\fR] [\fIdisk-list\fR]
 .fi
 
@@ -54,12 +54,10 @@ compatibility. Use \fBrmformat\fR(1) for rewritable removable media devices.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdisk-name\fR\fR
 .ad
 .RS 21n
-.rt  
 Specify which disk should be made current upon entry into the program. The disk
 is specified by its logical name (for instance, \fB-d\fR \fBc0t1d0\fR). This
 can also be accomplished by specifying a single disk in the disk list.
@@ -67,24 +65,20 @@ can also be accomplished by specifying a single disk in the disk list.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
 .RS 21n
-.rt  
 Enable \fBSCSI\fR expert menu. Note this option is not recommended for casual
 use.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIcommand-file\fR\fR
 .ad
 .RS 21n
-.rt  
 Take command input from \fIcommand-file\fR rather than the standard input. The
 file must contain commands that appear just as they would if they had been
 entered from the keyboard. With this option, \fBformat\fR does not issue
@@ -98,48 +92,40 @@ is invoked, or specify \fBdisk\fR and the disk selection number in the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlog-file\fR\fR
 .ad
 .RS 21n
-.rt  
 Log a transcript of the \fBformat\fR session to the indicated \fIlog-file\fR,
 including the standard input, the standard output and the standard error.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
 .RS 21n
-.rt  
 Enable extended messages. Provides more detailed information in the event of an
 error.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR\fR
 .ad
 .RS 21n
-.rt  
 Enable extended and diagnostic messages. Provides extensive information on the
 state of a \fBSCSI\fR device's mode pages, during formatting.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIpartition-name\fR\fR
 .ad
 .RS 21n
-.rt  
 Specify the partition table for the disk which is current upon entry into the
 program. The table is specified by its name as defined in the data file. This
 option can be used only if a disk is being made current, and its type is either
@@ -148,24 +134,20 @@ specified or available from the disk label.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 21n
-.rt  
 Silent. Suppress all of the standard output. Error messages are still
 displayed. This is generally used in conjunction with the \fB-f\fR option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fIdisk-type\fR\fR
 .ad
 .RS 21n
-.rt  
 Specify the type of disk which is current upon entry into the program. A disk's
 type is specified by name in the data file. This option can only be used if a
 disk is being made current as described above.
@@ -173,12 +155,10 @@ disk is being made current as described above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fIdata-file\fR\fR
 .ad
 .RS 21n
-.rt  
 Use the list of disks contained in \fIdata-file\fR.
 .RE
 
@@ -203,12 +183,10 @@ After you specify a disk, \fBformat\fR displays its main menu. This menu
 enables you to perform the following tasks:
 .sp
 .ne 2
-.mk
 .na
 \fBanalyze\fR
 .ad
 .RS 13n
-.rt  
 Run read, write, compare tests, and data purge. The data purge function
 implements the National Computer Security Center Guide to Understanding Data
 Remnance (\fBNCSC-TG-025\fR version 2) Overwriting Algorithm. See NOTES.
@@ -216,23 +194,19 @@ Remnance (\fBNCSC-TG-025\fR version 2) Overwriting Algorithm. See NOTES.
 
 .sp
 .ne 2
-.mk
 .na
 \fBbackup\fR
 .ad
 .RS 13n
-.rt  
 Search for backup labels.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBcache\fR
 .ad
 .RS 13n
-.rt  
 Enable, disable, and query the state of the write cache and read cache. This
 menu item only appears when \fBformat\fR is invoked with the \fB-e\fR option,
 and is only supported on \fBSCSI\fR devices..
@@ -240,24 +214,20 @@ and is only supported on \fBSCSI\fR devices..
 
 .sp
 .ne 2
-.mk
 .na
 \fBcurrent\fR
 .ad
 .RS 13n
-.rt  
 Display the device name, the disk geometry, and the pathname to the disk
 device.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBdefect\fR
 .ad
 .RS 13n
-.rt  
 Retrieve and print defect lists. This option is supported only on \fBSCSI\fR
 devices. \fBIDE\fR disks perform automatic defect management. Upon using the
 \fBdefect\fR option on an \fBIDE\fR disk, you receive the message:
@@ -274,43 +244,37 @@ or disk supports automatic defect management.
 
 .sp
 .ne 2
-.mk
 .na
 \fBdisk\fR
 .ad
 .RS 13n
-.rt  
 Choose the disk that will be used in subsequent operations (known as the
 current disk.)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBfdisk\fR
 .ad
 .RS 13n
-.rt  
 Run the \fBfdisk\fR(1M) program to create a \fBfdisk\fR partition for Solaris
 software (x86 based systems only).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBformat\fR
 .ad
 .RS 13n
-.rt  
 Format and verify the current disk. This option is supported only on \fBSCSI\fR
 devices. \fBIDE\fR disks are pre-formatted by the manufacturer. Upon using the
 \fBformat\fR option on an \fBIDE\fR disk, you receive the message:
 .sp
 .in +2
 .nf
-Cannot format this drive. Please use your 
+Cannot format this drive. Please use your
 manufacturer-supplied formatting utility.
 .fi
 .in -2
@@ -320,113 +284,93 @@ manufacturer-supplied formatting utility.
 
 .sp
 .ne 2
-.mk
 .na
 \fBinquiry\fR
 .ad
 .RS 13n
-.rt  
 Display the vendor, product name, and revision level of the current drive.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBlabel\fR
 .ad
 .RS 13n
-.rt  
 Write a new label to the current disk.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBpartition\fR
 .ad
 .RS 13n
-.rt  
 Create and modify slices.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBquit\fR
 .ad
 .RS 13n
-.rt  
 Exit the format menu.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBrepair\fR
 .ad
 .RS 13n
-.rt  
 Repair a specific block on the disk.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBsave\fR
 .ad
 .RS 13n
-.rt  
 Save new disk and slice information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBtype\fR
 .ad
 .RS 13n
-.rt  
 Select (define) a disk type.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBverify\fR
 .ad
 .RS 13n
-.rt  
 Read and display labels. Print information such as the number of cylinders,
 alternate cylinders, heads, sectors, and the partition table.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBvolname\fR
 .ad
 .RS 13n
-.rt  
 Label the disk with a new eight character volume name.
 .RE
 
 .SH ENVIRONMENT VARIABLES
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFORMAT_PATH\fR\fR
 .ad
 .RS 15n
-.rt  
 a colon-separated list of filenames and/or directories of disk and partition
 definitions. If a directory is specified, \fBformat\fR searches for the file
 \fBformat.dat\fR in that directory.
@@ -435,12 +379,10 @@ definitions. If a directory is specified, \fBformat\fR searches for the file
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/format.dat\fR\fR
 .ad
 .RS 19n
-.rt  
 default data file
 .RE
 
diff --git a/usr/src/man/man1m/fpsd.1m b/usr/src/man/man1m/fpsd.1m
index f97b642ea4..cd214345e9 100644
--- a/usr/src/man/man1m/fpsd.1m
+++ b/usr/src/man/man1m/fpsd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fpsd 1M "7 Aug 2008" "SunOS 5.11" "System Administration Commands"
+.TH FPSD 1M "Aug 7, 2008"
 .SH NAME
 fpsd \- Fp-scrubber daemon
 .SH SYNOPSIS
@@ -25,7 +25,6 @@ case an error is detected by the test.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -36,7 +35,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnon-zero\fR\fR
 .ad
@@ -53,13 +51,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/fruadm.1m b/usr/src/man/man1m/fruadm.1m
index 6f2ff56dc0..a4683179c3 100644
--- a/usr/src/man/man1m/fruadm.1m
+++ b/usr/src/man/man1m/fruadm.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fruadm 1M "22 Feb 2002" "SunOS 5.11" "System Administration Commands"
+.TH FRUADM 1M "Feb 22, 2002"
 .SH NAME
 fruadm \- prints and updates customer data associated with FRUs
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/platform/sun4u/sbin/fruadm\fR 
+\fB/usr/platform/sun4u/sbin/fruadm\fR
 .fi
 
 .LP
@@ -45,23 +45,19 @@ the platform-administrator user.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 6n
-.rt  
 List the system's frutree paths.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 6n
-.rt  
 Recursively display or update the data for all containers rooted at the
 argument \fIpath\fR.
 .RE
@@ -72,12 +68,10 @@ argument \fIpath\fR.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpath\fR\fR
 .ad
 .RS 8n
-.rt  
 A full or partial system frutree path for or under which to print or set the
 customer data. The first field of each line of output of \fBfruadm \fR\fB-l\fR
 gives the valid full \fBfrutree\fR paths for the system.
@@ -91,12 +85,10 @@ under \fIpath\fR will be selected.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fItext\fR\fR
 .ad
 .RS 8n
-.rt  
 Up to 80 characters of text set as the customer data. If the text contains
 white space or shell metacharacters, it should be quoted appropriately for the
 user's shell.
@@ -184,23 +176,19 @@ example# fruadm -r /frutree/chassis "Property of XYZ, Inc."
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR \fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -212,13 +200,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUnstable
+Interface Stability	Unstable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/fsck.1m b/usr/src/man/man1m/fsck.1m
index c32e3e7d53..a4e38760f1 100644
--- a/usr/src/man/man1m/fsck.1m
+++ b/usr/src/man/man1m/fsck.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fsck 1M "7 May 2008" "SunOS 5.11" "System Administration Commands"
+.TH FSCK 1M "May 7, 2008"
 .SH NAME
 fsck \- check and repair file systems
 .SH SYNOPSIS
@@ -15,7 +15,7 @@ fsck \- check and repair file systems
 
 .LP
 .nf
-\fBfsck\fR [\fB-F\fR \fIFSType\fR] [\fB-n\fR | N | y | Y] [\fB-V\fR] [\fB-v\fR] 
+\fBfsck\fR [\fB-F\fR \fIFSType\fR] [\fB-n\fR | N | y | Y] [\fB-V\fR] [\fB-v\fR]
      [\fB-o\fR \fIFSType-specific-options\fR] [\fIspecial\fR]...
 .fi
 
@@ -65,7 +65,6 @@ information.
 The following generic options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fIFSType\fR\fR
 .ad
@@ -76,7 +75,6 @@ Specify the file system type on which to operate.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
@@ -97,7 +95,6 @@ ufs fsck: sanity check: /dev/rdsk/c0t3d0s1 okay
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR | \fB-N\fR\fR
 .ad
@@ -109,7 +106,6 @@ the file system for writing.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
@@ -121,7 +117,6 @@ be used to verify and to validate the command line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -133,7 +128,6 @@ Enables verbose output. Might not be supported by all filesystem-specific
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-y\fR | \fBY\fR\fR
 .ad
@@ -144,7 +138,6 @@ Assume a \fByes\fR response to all questions asked by \fBfsck\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIspecific-options\fR\fR
 .ad
@@ -154,7 +147,6 @@ These \fIspecific-options\fR can be any combination of the following separated
 by commas (with no intervening spaces).
 .sp
 .ne 2
-.mk
 .na
 \fB\fBb=\fR\fIn\fR\fR
 .ad
@@ -167,7 +159,6 @@ by running \fBnewfs\fR(1M) with the \fB-Nv\fR options specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBc\fR\fR
 .ad
@@ -190,7 +181,6 @@ future releases.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBf\fR\fR
 .ad
@@ -202,7 +192,6 @@ clean flag.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBp\fR\fR
 .ad
@@ -215,7 +204,6 @@ parallel file system checking.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBw\fR\fR
 .ad
@@ -229,7 +217,6 @@ Check writable file systems only.
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -240,7 +227,6 @@ file system is unmounted and OK
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
@@ -251,7 +237,6 @@ erroneous parameters are specified
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB32\fR\fR
 .ad
@@ -262,7 +247,6 @@ file system is unmounted and needs checking (\fBfsck\fR \fB-m\fR only)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB33\fR\fR
 .ad
@@ -273,7 +257,6 @@ file system is already mounted
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB34\fR\fR
 .ad
@@ -284,7 +267,6 @@ cannot stat device
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB35\fR\fR
 .ad
@@ -295,7 +277,6 @@ a filesystem that is mounted read/write was modified - reboot
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB36\fR\fR
 .ad
@@ -306,7 +287,6 @@ uncorrectable errors detected - terminate normally
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB37\fR\fR
 .ad
@@ -317,7 +297,6 @@ a signal was caught during processing
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB39\fR\fR
 .ad
@@ -328,7 +307,6 @@ uncorrectable errors detected - terminate immediately
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB40\fR\fR
 .ad
@@ -345,7 +323,6 @@ The \fBfsck\fR command is \fBlarge file aware\fR for UFS file systems, per the
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/fs\fR\fR
 .ad
@@ -355,7 +332,6 @@ default local file system type. Default values can be set for the following
 flags in \fB/etc/default/fs\fR. For example: \fBLOCAL=ufs.\fR
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLOCAL\fR\fR
 .ad
@@ -368,7 +344,6 @@ The default partition for a command if no FSType is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vfstab\fR\fR
 .ad
@@ -385,13 +360,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/fsck_cachefs.1m b/usr/src/man/man1m/fsck_cachefs.1m
index 3c0f3cf199..f000383687 100644
--- a/usr/src/man/man1m/fsck_cachefs.1m
+++ b/usr/src/man/man1m/fsck_cachefs.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fsck_cachefs 1M "9 Oct 2002" "SunOS 5.11" "System Administration Commands"
+.TH FSCK_CACHEFS 1M "Oct 9, 2002"
 .SH NAME
 fsck_cachefs \- check integrity of data cached with CacheFS
 .SH SYNOPSIS
@@ -26,23 +26,19 @@ file systems is at boot time from an entry in the \fB/etc/vfstab\fR file. See
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
 .RS 14n
-.rt  
 Check, but do not repair.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fBnoclean\fR\fR
 .ad
 .RS 14n
-.rt  
 Force a check on the cache even if there is no reason to suspect there is a
 problem.
 .RE
diff --git a/usr/src/man/man1m/fsck_pcfs.1m b/usr/src/man/man1m/fsck_pcfs.1m
index 69233cd3f3..55c16de8b2 100644
--- a/usr/src/man/man1m/fsck_pcfs.1m
+++ b/usr/src/man/man1m/fsck_pcfs.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fsck_pcfs 1M "28 Jan 2000" "SunOS 5.11" "System Administration Commands"
+.TH FSCK_PCFS 1M "Jan 28, 2000"
 .SH NAME
 fsck_pcfs \- file system consistency check and interactive repair
 .SH SYNOPSIS
@@ -61,21 +61,17 @@ units remaining in the file system.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fIgeneric_options\fR\fR
 .ad
 .RS 23n
-.rt  
 The following generic options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
 .RS 11n
-.rt  
 Check but do not repair. This option checks that the file system is suitable
 for mounting, returning the appropriate exit status. If the file system is
 ready for mounting, \fBfsck\fR  displays a message such as:
@@ -83,7 +79,7 @@ ready for mounting, \fBfsck\fR  displays a message such as:
 .in +2
 .nf
 pcfs fsck: sanity check:
-\fB/dev/rdiskette\fR okay 
+\fB/dev/rdiskette\fR okay
 .fi
 .in -2
 .sp
@@ -92,36 +88,30 @@ pcfs fsck: sanity check:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR | \fB-N\fR\fR
 .ad
 .RS 11n
-.rt  
  Assume a no response to  all  questions  asked  by \fBfsck\fR; do not open the
 file system for writing.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
 .RS 11n
-.rt  
 Echo the expanded command line, but do not execute  the command. This option
 may be used to verify and  to validate the command line.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-y\fR | \fB-Y\fR\fR
 .ad
 .RS 11n
-.rt  
 Assume a \fByes\fR response to all  questions  asked  by \fBfsck\fR.
 .RE
 
@@ -129,46 +119,38 @@ Assume a \fByes\fR response to all  questions  asked  by \fBfsck\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIspecific_options\fR\fR
 .ad
 .RS 23n
-.rt  
 Specify \fBpcfs\fR file system specific options in a comma-separated list, in
 any combination, with no intervening spaces.
 .sp
 .ne 2
-.mk
 .na
 \fBv\fR
 .ad
 .RS 5n
-.rt  
 Verify all allocation units are accessible prior to correcting inconsistencies
 in the metadata.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBp\fR
 .ad
 .RS 5n
-.rt  
 Check and fix the file system non-interactively (\fBpreen\fR).  Exit
 immediately if there is a problem requiring intervention.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBw\fR
 .ad
 .RS 5n
-.rt  
 Check writable file systems only.
 .RE
 
@@ -177,12 +159,10 @@ Check writable file systems only.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fIspecial\fR\fR
 .ad
 .RS 11n
-.rt  
 The device which contains the pcfs. The device name for a diskette is specified
 as \fB/dev/rdiskette0\fR for the first diskette drive, or \fB/dev/rdiskette1\fR
 for a second diskette drive. A hard disk device or high-capacity removable
@@ -202,13 +182,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/fsck_udfs.1m b/usr/src/man/man1m/fsck_udfs.1m
index f528dcc953..8aa5ed12b4 100644
--- a/usr/src/man/man1m/fsck_udfs.1m
+++ b/usr/src/man/man1m/fsck_udfs.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fsck_udfs 1M "5 September 2000" "SunOS 5.11" "System Administration Commands"
+.TH FSCK_UDFS 1M "Sep 5, 2000"
 .SH NAME
 fsck_udfs \- file system consistency check and interactive repair
 .SH SYNOPSIS
@@ -14,7 +14,7 @@ fsck_udfs \- file system consistency check and interactive repair
 
 .LP
 .nf
-\fBfsck\fR \fB-F\fR udfs [\fIgeneric_options\fR] [\fB-o\fR \fIspecific_options\fR] 
+\fBfsck\fR \fB-F\fR udfs [\fIgeneric_options\fR] [\fB-o\fR \fIspecific_options\fR]
      [\fIspecial \|.\|.\|.\fR]
 .fi
 
@@ -126,21 +126,17 @@ Total free block count incorrect
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIgeneric_options\fR\fR
 .ad
 .RS 23n
-.rt  
 The following \fIgeneric_options\fR are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
 .RS 11n
-.rt  
 Check but do not repair. This option checks to be sure that the file system is
 suitable for mounting, and returns the appropriate exit status. If the file
 system is ready for mounting, \fBfsck \fRdisplays a message such as:
@@ -156,36 +152,30 @@ udfs fsck: sanity check: /dev/rdsk/c0t2d0s0 okay
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR | \fB-N\fR\fR
 .ad
 .RS 11n
-.rt  
 Assume a \fBno\fR response to all questions asked by \fBfsck\fR; do not open
 the file system for writing.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
 .RS 11n
-.rt  
 Echo the expanded command line, but do not execute the command. This option can
 be used to verify and to validate the command line.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-y\fR | \fB-Y\fR\fR
 .ad
 .RS 11n
-.rt  
 Assume a \fByes\fR response to all questions asked by \fBfsck\fR.
 .RE
 
@@ -193,34 +183,28 @@ Assume a \fByes\fR response to all questions asked by \fBfsck\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIspecific_options\fR\fR
 .ad
 .RS 23n
-.rt  
 Specify \fBudfs\fR file system specific options in a comma-separated list with
 no intervening spaces. The following \fIspecific_options\fR are available:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBf\fR\fR
 .ad
 .RS 5n
-.rt  
 Force checking of file systems regardless of the state of their logical volume
 integrity state.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBp\fR\fR
 .ad
 .RS 5n
-.rt  
 Check and fix the file system non-interactively (\fBpreen\fR). Exit immediately
 if there is a problem that requires intervention. This option is required to
 enable parallel file system checking.
@@ -228,12 +212,10 @@ enable parallel file system checking.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBw\fR\fR
 .ad
 .RS 5n
-.rt  
 Check writable file systems only.
 .RE
 
@@ -242,12 +224,10 @@ Check writable file systems only.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vtstab\fR\fR
 .ad
 .RS 15n
-.rt  
 List of default parameters for each file system.
 .RE
 
@@ -275,7 +255,6 @@ to be completed before the next mount operation.
 .SH DIAGNOSTICS
 .sp
 .ne 2
-.mk
 .na
 \fBnot writable\fR
 .ad
@@ -286,7 +265,6 @@ You cannot write to the device.
 
 .sp
 .ne 2
-.mk
 .na
 \fBCurrently Mounted on\fR
 .ad
@@ -297,7 +275,6 @@ The device is already mounted and cannot run \fBfsck\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBFILE SYSTEM WAS MODIFIED\fR
 .ad
@@ -308,7 +285,6 @@ File system has been modified to bring it to a consistent state.
 
 .sp
 .ne 2
-.mk
 .na
 \fBCan't read allocation extent\fR
 .ad
@@ -319,7 +295,6 @@ Cannot read the block containing allocation extent.
 
 .sp
 .ne 2
-.mk
 .na
 \fBBad tag on alloc extent\fR
 .ad
@@ -330,7 +305,6 @@ Invalid tag detected when expecting an allocation extent.
 
 .sp
 .ne 2
-.mk
 .na
 \fBVolume sequence tag error\fR
 .ad
@@ -341,7 +315,6 @@ Invalid tag detected in the volume sequence.
 
 .sp
 .ne 2
-.mk
 .na
 \fBSpace bitmap tag error\fR
 .ad
@@ -352,7 +325,6 @@ Invalid tag detected in the space bitmap.
 
 .sp
 .ne 2
-.mk
 .na
 \fBUNEXPECTED INCONSISTENCY; RUN fsck MANUALLY\fR
 .ad
diff --git a/usr/src/man/man1m/fsck_ufs.1m b/usr/src/man/man1m/fsck_ufs.1m
index b176fc5014..1263d958ba 100644
--- a/usr/src/man/man1m/fsck_ufs.1m
+++ b/usr/src/man/man1m/fsck_ufs.1m
@@ -1,10 +1,10 @@
 '\" te
-.\" Copyright (c) 2003, Sun Microsystems, Inc.  All Rights Reserved 
+.\" Copyright (c) 2003, Sun Microsystems, Inc.  All Rights Reserved
 .\" Copyright 1989 AT&T
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fsck_ufs 1M "2 Aug 2005" "SunOS 5.11" "System Administration Commands"
+.TH FSCK_UFS 1M "Aug 2, 2005"
 .SH NAME
 fsck_ufs \- file system consistency check and interactive repair
 .SH SYNOPSIS
@@ -15,7 +15,7 @@ fsck_ufs \- file system consistency check and interactive repair
 
 .LP
 .nf
-\fBfsck\fR \fB-F\fR ufs [\fIgeneric-options\fR] [\fB-o\fR \fIspecific-options\fR] 
+\fBfsck\fR \fB-F\fR ufs [\fIgeneric-options\fR] [\fB-o\fR \fIspecific-options\fR]
      [\fIspecial\fR]...
 .fi
 
@@ -149,18 +149,15 @@ attempt indicates the presence of at least one large file. See
 The \fIgeneric-options\fR consist of the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
 .RS 12n
-.rt  
 Check but do not repair. This option checks that the file system is suitable
 for mounting, returning the appropriate exit status. If the file system is
 ready for mounting, \fBfsck\fR displays a message such as:
 .sp
 .ne 2
-.mk
 .na
 \fB\fR
 .ad
@@ -173,48 +170,40 @@ ready for mounting, \fBfsck\fR displays a message such as:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\||\|\fBN\fR\fR
 .ad
 .RS 12n
-.rt  
 Assume a \fBno\fR response to all questions asked by \fBfsck\fR; do not open
 the file system for writing.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
 .RS 12n
-.rt  
 Echo the expanded command line, but do not execute the command. This option may
 be used to verify and to validate the command line.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 12n
-.rt  
 Enables verbose output. Might not be supported by all filesystem-specific
 \fBfsck\fR implementations.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-y\fR\||\|\fBY\fR\fR
 .ad
 .RS 12n
-.rt  
 Assume a \fByes\fR response to all questions asked by \fBfsck\fR.
 .RE
 
@@ -223,22 +212,18 @@ Assume a \fByes\fR response to all questions asked by \fBfsck\fR.
 See generic \fBfsck\fR(1M) for the details for specifying \fIspecial\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIspecific-options\fR\fR
 .ad
 .RS 23n
-.rt  
 Specify \fBufs\fR file system specific options. These options can be any
 combination of the following separated by commas (with no intervening spaces).
 .sp
 .ne 2
-.mk
 .na
 \fB\fBb=\fR\fIn\fR\fR
 .ad
 .RS 7n
-.rt  
 Use block \fIn\fR as the super block for the file system. Block 32 is always
 one of the alternate super blocks. Determine the location of other super blocks
 by running \fBnewfs\fR(1M) with the \fB-Nv\fR options specified.
@@ -246,24 +231,20 @@ by running \fBnewfs\fR(1M) with the \fB-Nv\fR options specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBf\fR\fR
 .ad
 .RS 7n
-.rt  
 Force checking of file systems regardless of the state of their super block
 clean flag.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBp\fR\fR
 .ad
 .RS 7n
-.rt  
 Check and fix the file system non-interactively ("preen"). Exit immediately if
 there is a problem requiring intervention. This option is required to enable
 parallel file system checking.
@@ -271,12 +252,10 @@ parallel file system checking.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBw\fR\fR
 .ad
 .RS 7n
-.rt  
 Check writable file systems only.
 .RE
 
@@ -285,12 +264,10 @@ Check writable file systems only.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vfstab\fR\fR
 .ad
 .RS 15n
-.rt  
 list of default parameters for each file system
 .RE
 
@@ -322,12 +299,10 @@ Running \fBfsck\fR on file systems larger than 2 Gb fails if the user chooses
 to use the block interface to the device:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfsck\fR \fB/dev/dsk/c?t?d?s?\fR\fR
 .ad
 .RS 26n
-.rt  
 
 .RE
 
@@ -336,12 +311,10 @@ to use the block interface to the device:
 rather than the raw (character special) device:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfsck\fR \fB/dev/rdsk/c?t?d?s?\fR\fR
 .ad
 .RS 27n
-.rt  
 
 .RE
 
diff --git a/usr/src/man/man1m/fsdb.1m b/usr/src/man/man1m/fsdb.1m
index 2c70f32dc7..4b9cab6eed 100644
--- a/usr/src/man/man1m/fsdb.1m
+++ b/usr/src/man/man1m/fsdb.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fsdb 1M "16 Sep 1996" "SunOS 5.11" "System Administration Commands"
+.TH FSDB 1M "Sep 16, 1996"
 .SH NAME
 fsdb \- file system debugger
 .SH SYNOPSIS
@@ -25,12 +25,10 @@ be consulted for a more detailed description of the debugging capabilities.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fR
 .ad
 .RS 6n
-.rt  
 Specify the  \fIFSType\fR on which to operate.  The  \fIFSType\fR should either
 be specified here or be determinable from  \fB/etc/vfstab\fR by matching the
 \fIspecial\fR with an entry in the table, or by consulting
@@ -39,12 +37,10 @@ be specified here or be determinable from  \fB/etc/vfstab\fR by matching the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
 .RS 6n
-.rt  
 Echo the complete command line, but do not execute the command. The command
 line is generated by using the options and arguments provided by the user and
 adding to them information derived from  \fB/etc/vfstab\fR. This option may be
@@ -53,12 +49,10 @@ used to verify and validate the command line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 6n
-.rt  
 Specify  \fIFSType-\fRspecific options.
 .RE
 
@@ -70,22 +64,18 @@ encountering files greater than or equal to 2 Gbyte ( 2^31 bytes).
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/fs\fR\fR
 .ad
 .RS 19n
-.rt  
 default local file system type. Default values can be set for the following
 flags in \fB/etc/default/fs\fR. For example: \fBLOCAL=ufs\fR
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLOCAL:\fR\fR
 .ad
 .RS 10n
-.rt  
 The default partition for a command if no FSType is specified.
 .RE
 
@@ -93,12 +83,10 @@ The default partition for a command if no FSType is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vfstab\fR\fR
 .ad
 .RS 19n
-.rt  
 list of default parameters for each file system
 .RE
 
diff --git a/usr/src/man/man1m/fsdb_udfs.1m b/usr/src/man/man1m/fsdb_udfs.1m
index 8f586647a9..5542c8aec1 100644
--- a/usr/src/man/man1m/fsdb_udfs.1m
+++ b/usr/src/man/man1m/fsdb_udfs.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fsdb_udfs 1M "11 Jun 1999" "SunOS 5.11" "System Administration Commands"
+.TH FSDB_UDFS 1M "Jun 11, 1999"
 .SH NAME
 fsdb_udfs \- udfs file system debugger
 .SH SYNOPSIS
@@ -44,55 +44,45 @@ Wherever possible, \fBadb\fR-like syntax has been adopted to promote the use of
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIspecific_option\fR\fR
 .ad
 .RS 22n
-.rt  
 Specify \fBudfs\fR file system specific options in a comma-separated list with
 no intervening spaces. The following specific options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fBo\fR
 .ad
 .RS 12n
-.rt  
 Override some error conditions.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBp=\fIstring\fR\fR
 .ad
 .RS 12n
-.rt  
 Set prompt to \fIstring\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBw\fR
 .ad
 .RS 12n
-.rt  
 Open for write.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB?\fR
 .ad
 .RS 12n
-.rt  
 Display usage.
 .RE
 
@@ -155,7 +145,7 @@ example,
 .sp
 .in +2
 .nf
- > 2:inode 
+ > 2:inode
 .fi
 .in -2
 .sp
@@ -173,7 +163,7 @@ So, if
 .sp
 .in +2
 .nf
-> 2000,400/X 
+> 2000,400/X
 .fi
 .in -2
 .sp
@@ -189,7 +179,7 @@ and the use of RETURN would be:
 .sp
 .in +2
 .nf
-> 2:ino; 0:dir?d 
+> 2:ino; 0:dir?d
 .fi
 .in -2
 .sp
@@ -200,7 +190,7 @@ or
 .sp
 .in +2
 .nf
-> 2:ino; 0:db:block?d 
+> 2:ino; 0:db:block?d
 .fi
 .in -2
 .sp
@@ -238,24 +228,20 @@ is again synonymous.
 The following symbols are recognized by \fBfsdb\fR:
 .sp
 .ne 2
-.mk
 .na
 \fBRETURN\fR
 .ad
 .RS 13n
-.rt  
 Update the value of dot by the current value of \fItype\fR and \fIdisplay\fR
 using the current value of \fIcount\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fI#\fR\fR
 .ad
 .RS 13n
-.rt  
 Update the value of dot by specifying a numeric expression. Specify numeric
 expressions using addition, subtraction, mulitiplication, and division
 operators ( \fB+\fR, \fB-\fR, \fB*\fR, and \fB%\fR). Numeric expressions are
@@ -265,12 +251,10 @@ value of dot is updated.
 
 .sp
 .ne 2
-.mk
 .na
 \fB, \fIcount\fR\fR
 .ad
 .RS 13n
-.rt  
 Update the count indicator. The global value of \fIcount\fR is updated to
 \fIcount\fR. The value of \fIcount\fR remains until a new command is run. A
 \fIcount\fR specifier of \fB*\fR attempts to show a blocks's worth of
@@ -279,47 +263,39 @@ information. The default for \fIcount\fR is \fB1\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB? \fI f\fR\fR
 .ad
 .RS 13n
-.rt  
 Display in structured style with format specifier \fBf\fR. See \fBFormatted
 Output\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB/ \fIf\fR\fR
 .ad
 .RS 13n
-.rt  
 Display in unstructured style with format specifier \fBf\fR. See \fBFormatted
 Output\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\&.\fR
 .ad
 .RS 13n
-.rt  
 Display the value of dot.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB+\fIe\fR\fR
 .ad
 .RS 13n
-.rt  
 Increment the value of dot by the expression \fIe\fR. The amount actually
 incremented is dependent on the size of type: \fBdot = dot + \fR\fIe \fR\fB*
 \fR\fBsizeof\fR (\fItype\fR) The default for \fIe\fR is \fB1\fR.
@@ -327,23 +303,19 @@ incremented is dependent on the size of type: \fBdot = dot + \fR\fIe \fR\fB*
 
 .sp
 .ne 2
-.mk
 .na
 \fB\(mi\fIe\fR\fR
 .ad
 .RS 13n
-.rt  
 Decrement the value of dot by the expression \fIe \fR. See \fB+\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB*\fIe\fR\fR
 .ad
 .RS 13n
-.rt  
 Multiply the value of dot by the expression \fIe\fR. Multiplication and
 division don't use \fItype\fR. In the above calculation of dot, consider the
 \fBsizeof\fR (\fItype\fR) to be \fB1\fR.
@@ -351,47 +323,39 @@ division don't use \fItype\fR. In the above calculation of dot, consider the
 
 .sp
 .ne 2
-.mk
 .na
 \fB%\fIe\fR\fR
 .ad
 .RS 13n
-.rt  
 Divide the value of dot by the expression \fIe\fR. See \fB*\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB< \fIname\fR\fR
 .ad
 .RS 13n
-.rt  
 Restore an address saved in register \fIname\fR. \fIname\fR must be a single
 letter or digit.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB> \fIname\fR\fR
 .ad
 .RS 13n
-.rt  
 Save an address in register \fIname\fR. \fIname\fR must be a single letter or
 digit.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB= \fIf\fR\fR
 .ad
 .RS 13n
-.rt  
 Display indicator. If \fIf\fR is a legitimate format specifier (see
 \fBFormatted Output\fR), then the value of dot is displayed using format
 specifier \fIf\fR. Otherwise, assignment is assumed. See \fB= [s] [e]\fR.
@@ -399,12 +363,10 @@ specifier \fIf\fR. Otherwise, assignment is assumed. See \fB= [s] [e]\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB= [\fIs\fR] [\fIe\fR]\fR
 .ad
 .RS 13n
-.rt  
 Change the value of dot using an assignment indicator. The address pointed to
 by dot has its contents changed to the value of the expression \fIe\fR or to
 the \fBASCII\fR representation of the quoted (\fB"\fR) string \fIs\fR. This can
@@ -413,24 +375,20 @@ be useful for changing directory names or \fBASCII\fR file information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB=+ \fIe\fR\fR
 .ad
 .RS 13n
-.rt  
 Change the value of dot using an incremental assignment. The address pointed to
 by dot has its contents incremented by expression \fIe\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB=- e\fR
 .ad
 .RS 13n
-.rt  
 Change the value of dot using a decremental assignment. Decrement the contents
 of the address pointed to by dot by expression \fIe\fR.
 .RE
@@ -454,7 +412,6 @@ also supported.
 The following commands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fBbase[=\fIb\fR]\fR
 .ad
@@ -469,7 +426,6 @@ the base. The default for base is hexadecimal.
 
 .sp
 .ne 2
-.mk
 .na
 \fBblock\fR
 .ad
@@ -480,7 +436,6 @@ Convert the value of dot to a block address.
 
 .sp
 .ne 2
-.mk
 .na
 \fBcd [\fIdir\fR]\fR
 .ad
@@ -493,7 +448,6 @@ directories to inode 2, root (\fB/\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fBdirectory\fR
 .ad
@@ -505,7 +459,6 @@ slot offset in that directory, and dot now points to this entry.
 
 .sp
 .ne 2
-.mk
 .na
 \fBfile\fR
 .ad
@@ -517,7 +470,6 @@ The value of dot is updated to the first byte of  this block.
 
 .sp
 .ne 2
-.mk
 .na
 \fBfind \fIdir\fR [\fB-name\fR \fIn\fR] | [\fB-inum\fR\fI i\fR]\fR
 .ad
@@ -531,7 +483,6 @@ be used at one time. The find \fB-print\fR is not necessary or accepted.
 
 .sp
 .ne 2
-.mk
 .na
 \fBfill=\fIp\fR\fR
 .ad
@@ -543,7 +494,6 @@ and count.
 
 .sp
 .ne 2
-.mk
 .na
 \fBinode\fR
 .ad
@@ -557,7 +507,6 @@ the current inode and that inode is displayed in inode format.
 
 .sp
 .ne 2
-.mk
 .na
 \fBls [ \fB-R\fR ] [\fB-l\fR ] \fIpat1\fR \fIpat2\fR...\fR
 .ad
@@ -572,7 +521,6 @@ and the name; use the inode command with \fB?i\fR to get more information.
 
 .sp
 .ne 2
-.mk
 .na
 \fBoverride\fR
 .ad
@@ -584,7 +532,6 @@ override is toggled to \fBon\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBprompt "\fIp\fR"\fR
 .ad
@@ -595,7 +542,6 @@ Change the \fBfsdb\fR prompt to \fIp\fR. \fIp\fR must be enclosed in quotes.
 
 .sp
 .ne 2
-.mk
 .na
 \fBpwd\fR
 .ad
@@ -606,7 +552,6 @@ Display the current working directory.
 
 .sp
 .ne 2
-.mk
 .na
 \fBquit\fR
 .ad
@@ -617,7 +562,6 @@ Quit \fBfsdb\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBtag\fR
 .ad
@@ -629,7 +573,6 @@ according to the tag.
 
 .sp
 .ne 2
-.mk
 .na
 \fB!\fR
 .ad
@@ -664,111 +607,91 @@ address of the link count field.
 The following inode commands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fBat\fR
 .ad
 .RS 8n
-.rt  
 Access time
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBbs\fR
 .ad
 .RS 8n
-.rt  
 Block size
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBct\fR
 .ad
 .RS 8n
-.rt  
 Creation time
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBgid\fR
 .ad
 .RS 8n
-.rt  
 Group id
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBln\fR
 .ad
 .RS 8n
-.rt  
 Link number
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBmt\fR
 .ad
 .RS 8n
-.rt  
 Modification time
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBmd\fR
 .ad
 .RS 8n
-.rt  
 Mode
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBmaj\fR
 .ad
 .RS 8n
-.rt  
 Major device number
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBmin\fR
 .ad
 .RS 8n
-.rt  
 Minor device number
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnm\fR
 .ad
 .RS 8n
-.rt  
 This command actually operates on the directory name field. Once      poised at
 the desired directory entry (using the \fBdirectory\fR command), this command
 allows you to change or display the directory name. For example,
@@ -788,34 +711,28 @@ string is truncated to fit and a warning message is displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fBsz\fR
 .ad
 .RS 8n
-.rt  
 File size
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBuid\fR
 .ad
 .RS 8n
-.rt  
 User \fBID\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBuniq\fR
 .ad
 .RS 8n
-.rt  
 Unique \fBID\fR
 .RE
 
@@ -835,23 +752,19 @@ Format specifiers are preceded by the slash (\fB/\fR) or question mark
 The following format specifiers are preceded by the \fB?\fR character:
 .sp
 .ne 2
-.mk
 .na
 \fBi\fR
 .ad
 .RS 5n
-.rt  
 Display as inodes in the current base.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBd\fR
 .ad
 .RS 5n
-.rt  
 Display as directories in the current base.
 .RE
 
@@ -860,56 +773,46 @@ Display as directories in the current base.
 The following format specifiers are preceded by the \fB/\fR character:
 .sp
 .ne 2
-.mk
 .na
 \fBb\fR
 .ad
 .RS 9n
-.rt  
 Display as bytes in the current base.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBc\fR
 .ad
 .RS 9n
-.rt  
 Display as characters.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBo | O\fR
 .ad
 .RS 9n
-.rt  
 Display as octal shorts or longs.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBd | D\fR
 .ad
 .RS 9n
-.rt  
 Display as decimal shorts or longs.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBx | X\fR
 .ad
 .RS 9n
-.rt  
 Display as hexadecimal shorts or longs.
 .RE
 
@@ -939,7 +842,7 @@ becomes the current inode.
 .sp
 .in +2
 .nf
-> 386:ino?i 
+> 386:ino?i
 .fi
 .in -2
 .sp
@@ -1072,7 +975,7 @@ The following command changes the \fIname\fR field in the directory slot to
 .sp
 .in +2
 .nf
- > 7:dir:nm="name" 
+ > 7:dir:nm="name"
 .fi
 .in -2
 .sp
@@ -1095,7 +998,7 @@ type.
 .sp
 .in +2
 .nf
-> 2050=0xffff 
+> 2050=0xffff
 .fi
 .in -2
 .sp
diff --git a/usr/src/man/man1m/fsdb_ufs.1m b/usr/src/man/man1m/fsdb_ufs.1m
index 426043f2af..6481f4688a 100644
--- a/usr/src/man/man1m/fsdb_ufs.1m
+++ b/usr/src/man/man1m/fsdb_ufs.1m
@@ -2,7 +2,7 @@
 .\"  Copyright (c) 1988 Regents of the University
 .\" of California.  All rights reserved.  Copyright (c) 2003 Sun Microsystems,
 .\" Inc.  All Rights Reserved.
-.TH fsdb_ufs 1M "14 Apr 2003" "SunOS 5.11" "System Administration Commands"
+.TH FSDB_UFS 1M "Apr 14, 2003"
 .SH NAME
 fsdb_ufs \- ufs file system debugger
 .SH SYNOPSIS
@@ -42,56 +42,46 @@ Wherever possible, \fBadb-\fRlike syntax was adopted to promote the use of
 The following option is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 6n
-.rt  
 Specify \fBUFS\fR file system specific options. These options can be any
 combination of the following separated by commas (with no intervening spaces).
 The options available are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB?\fR\fR
 .ad
 .RS 14n
-.rt  
 Display usage
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBo\fR\fR
 .ad
 .RS 14n
-.rt  
 Override some error conditions
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBp='string'\fR\fR
 .ad
 .RS 14n
-.rt  
 set prompt to string
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBw\fR\fR
 .ad
 .RS 14n
-.rt  
 open for write
 .RE
 
@@ -216,24 +206,20 @@ is again synonymous.
 The symbols recognized by \fBfsdb\fR are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRETURN\fR\fR
 .ad
 .RS 13n
-.rt  
 update the value of \fBdot\fR by the current value of \fBtype\fR and display
 using the current value of \fBcount\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB#\fR\fR
 .ad
 .RS 13n
-.rt  
 numeric expressions may be composed of +, -, *, and % operators (evaluated left
 to right) and may use parentheses. Once evaluated, the value of \fBdot\fR is
 updated.
@@ -241,12 +227,10 @@ updated.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB,\fR\fI count\fR\fR
 .ad
 .RS 13n
-.rt  
 count indicator. The global value of \fBcount\fR will be updated to
 \fBcount\fR. The value of \fBcount\fR will remain until a new command is run. A
 count specifier of '*' will attempt to show a \fIblocks's\fR worth of
@@ -255,47 +239,39 @@ information. The default for \fBcount\fR is 1.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB?\fR\fI f\fR\fR
 .ad
 .RS 13n
-.rt  
 display in structured style with format specifier \fIf\fR. See
 \fBFormatted\fROutput\fB\&.\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/\fR\fI f\fR\fR
 .ad
 .RS 13n
-.rt  
 display in unstructured style with format specifier \fIf\fR See
 \fBFormatted\fROutput\fB\&.\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\&.\fR\fR
 .ad
 .RS 13n
-.rt  
 the value of \fBdot\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB+\fR\fIe\fR\fR
 .ad
 .RS 13n
-.rt  
 increment the value of \fBdot\fR by the expression \fIe.\fR The amount actually
 incremented is dependent on the size of \fBtype\fR:
 .sp
@@ -306,23 +282,19 @@ The default for \fIe\fR is \fB1\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-\fR\fIe\fR\fR
 .ad
 .RS 13n
-.rt  
 decrement the value of \fBdot\fR by the expression \fIe\fR. See  \fB+\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB*\fR\fIe\fR\fR
 .ad
 .RS 13n
-.rt  
 multiply the value of \fBdot\fR by the expression \fIe.\fR Multiplication and
 division don't use \fBtype\fR. In the above calculation of \fBdot\fR, consider
 the \fBsizeof(type)\fR to be \fB1\fR.
@@ -330,47 +302,39 @@ the \fBsizeof(type)\fR to be \fB1\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%\fR\fIe\fR\fR
 .ad
 .RS 13n
-.rt  
 divide the value of \fBdot\fR by the expression \fIe\fR. See  \fB*\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB<\fR\fI name\fR\fR
 .ad
 .RS 13n
-.rt  
 restore an address saved in register \fIname\fR. \fIname\fR must be a single
 letter or digit.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>\fR\fI name\fR\fR
 .ad
 .RS 13n
-.rt  
 save an address in register \fIname\fR. \fIname\fR must be a single letter or
 digit.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB=\fR\fI f\fR\fR
 .ad
 .RS 13n
-.rt  
 display indicator. If \fIf\fR is a legitimate format specifier. then the value
 of \fBdot\fR is displayed using the format specifier \fIf\fR. See
 \fBFormatted\fROutput. Otherwise, assignment is assumed See  \fB=\fR.
@@ -378,12 +342,10 @@ of \fBdot\fR is displayed using the format specifier \fIf\fR. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB= [\fR\fIs\fR\fB] [\fR\fIe\fR\fB]\fR\fR
 .ad
 .RS 13n
-.rt  
 assignment indicator. The address pointed to by \fBdot\fR has its contents
 changed to the value of the expression \fIe\fR or to the \fBASCII\fR
 representation of the quoted (") string \fIs\fR. This may be useful for
@@ -392,24 +354,20 @@ changing directory names or \fBASCII\fR file information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB=+\fR\fI e\fR\fR
 .ad
 .RS 13n
-.rt  
 incremental assignment. The address pointed to by \fBdot\fR has its contents
 incremented by expression \fIe\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB=-\fR\fI e\fR\fR
 .ad
 .RS 13n
-.rt  
 decremental assignment. The address pointed to by \fBdot\fR has its contents
 decremented by expression \fIe\fR.
 .RE
@@ -429,7 +387,6 @@ counterparts. See individual commands for details. The '*', '?', and '[-]' wild
 card characters are available.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbase=b\fR\fR
 .ad
@@ -445,7 +402,6 @@ the '0', '0t', or '0x' prefix when changing the \fBbase\fR. The default for
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBblock\fR\fR
 .ad
@@ -456,7 +412,6 @@ convert the value of \fBdot\fR to a block address.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcd \fR\fIdir\fR\fR
 .ad
@@ -469,7 +424,6 @@ change directories to inode \fB2\fR ("/").
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcg\fR\fR
 .ad
@@ -480,7 +434,6 @@ convert the value of \fBdot\fR to a cylinder group.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdirectory\fR\fR
 .ad
@@ -493,7 +446,6 @@ to this entry.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfile\fR\fR
 .ad
@@ -505,7 +457,6 @@ the file. The value of \fBdot\fR is updated to the first byte of this block.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfind\fR \fIdir\fR [ \fB-name\fR \fIn\fR] [\fB-inum\fR \fIi\fR]\fR
 .ad
@@ -519,7 +470,6 @@ may be used at one time. Also, the -print is not needed or accepted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfill\fR\fI=p\fR\fR
 .ad
@@ -531,7 +481,6 @@ fill an area of disk with pattern \fIp\fR. The area of disk is delimited by
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfragment\fR\fR
 .ad
@@ -544,7 +493,6 @@ that is able to be displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinode\fR\fR
 .ad
@@ -559,7 +507,6 @@ displayed in inode format.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlog_chk\fR\fR
 .ad
@@ -571,7 +518,6 @@ the layout.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlog_delta\fR\fR
 .ad
@@ -584,7 +530,6 @@ head/tail offsets.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlog_head\fR\fR
 .ad
@@ -596,7 +541,6 @@ block allocation for the log and the data structures on the disk.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlog_otodb\fR\fR
 .ad
@@ -608,7 +552,6 @@ the log.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlog_show\fR\fR
 .ad
@@ -620,7 +563,6 @@ log (EOL).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBls\fR\fR
 .ad
@@ -636,7 +578,6 @@ and the name; use the \fBinode\fR command with '?i' to get more information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBoverride\fR\fR
 .ad
@@ -648,7 +589,6 @@ override is toggled on.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprompt\fR\fI p\fR\fR
 .ad
@@ -659,7 +599,6 @@ change the \fBfsdb\fR prompt to \fIp\fR. \fIp\fR must be surrounded by (")s.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpwd\fR\fR
 .ad
@@ -670,7 +609,6 @@ display the current working directory.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBquit\fR\fR
 .ad
@@ -681,7 +619,6 @@ quit \fBfsdb\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsb\fR\fR
 .ad
@@ -695,7 +632,6 @@ superblock and display it in superblock format.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshadow\fR\fR
 .ad
@@ -707,7 +643,6 @@ the beginning of the shadow inode data.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB!\fR\fR
 .ad
@@ -734,45 +669,37 @@ would increment the link count of the current \fBinode\fR and set the value of
 \fIdot\fR to the address of the link count field.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBat\fR\fR
 .ad
 .RS 7n
-.rt  
 access time.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbs\fR\fR
 .ad
 .RS 7n
-.rt  
 block size.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBct\fR\fR
 .ad
 .RS 7n
-.rt  
 creation time.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdb\fR\fR
 .ad
 .RS 7n
-.rt  
 use the current value of \fIdot\fR as a direct block index, where direct blocks
 number from 0 - 11. In order to display the block itself, you need to 'pipe'
 this result into the \fBblock\fR or \fBfragment\fR command. For example,
@@ -791,23 +718,19 @@ block address. 20 longs are then displayed in hexadecimal. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgid\fR\fR
 .ad
 .RS 7n
-.rt  
 group id.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBib\fR\fR
 .ad
 .RS 7n
-.rt  
 use the current value of \fIdot\fR as an indirect block index where indirect
 blocks number from 0 - 2. This will only get the indirect block itself (the
 block containing the pointers to the actual blocks). Use the \fBfile\fR command
@@ -816,67 +739,55 @@ and start at block 12 to get to the actual blocks.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBln\fR\fR
 .ad
 .RS 7n
-.rt  
 link count.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmt\fR\fR
 .ad
 .RS 7n
-.rt  
 modification time.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmd\fR\fR
 .ad
 .RS 7n
-.rt  
 mode.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmaj\fR\fR
 .ad
 .RS 7n
-.rt  
 major device number.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmin\fR\fR
 .ad
 .RS 7n
-.rt  
 minor device number.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnm\fR\fR
 .ad
 .RS 7n
-.rt  
 although listed here, this command actually operates on the directory name
 field. Once poised at the desired directory entry (using the \fIdirectory\fR
 command), this command will allow you to change or display the directory name.
@@ -892,34 +803,28 @@ message to this effect is displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsi\fR\fR
 .ad
 .RS 7n
-.rt  
 shadow inode.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsz\fR\fR
 .ad
 .RS 7n
-.rt  
 file size.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBuid\fR\fR
 .ad
 .RS 7n
-.rt  
 user id.
 .RE
 
@@ -932,64 +837,52 @@ superblocks and the like. Unstructured displays raw data. The following shows
 the different ways of displaying:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB?\fR\fR
 .ad
 .RS 5n
-.rt  
 .sp
 .ne 2
-.mk
 .na
 \fB\fBc\fR\fR
 .ad
 .RS 5n
-.rt  
 display as cylinder groups
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBi\fR\fR
 .ad
 .RS 5n
-.rt  
 display as inodes
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBd\fR\fR
 .ad
 .RS 5n
-.rt  
 display as directories
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBs\fR\fR
 .ad
 .RS 5n
-.rt  
 display as superblocks
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBS\fR\fR
 .ad
 .RS 5n
-.rt  
 display as shadow inode data
 .RE
 
@@ -997,64 +890,52 @@ display as shadow inode data
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/\fR\fR
 .ad
 .RS 5n
-.rt  
 .sp
 .ne 2
-.mk
 .na
 \fB\fBb\fR\fR
 .ad
 .RS 7n
-.rt  
 display as bytes
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBc\fR\fR
 .ad
 .RS 7n
-.rt  
 display as characters
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBo O\fR\fR
 .ad
 .RS 7n
-.rt  
 display as octal shorts or longs
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBd D\fR\fR
 .ad
 .RS 7n
-.rt  
 display as decimal shorts or longs
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBx X\fR\fR
 .ad
 .RS 7n
-.rt  
 display as hexadecimal shorts or longs
 .RE
 
diff --git a/usr/src/man/man1m/fsirand.1m b/usr/src/man/man1m/fsirand.1m
index 77ebd854dd..11ba825ec7 100644
--- a/usr/src/man/man1m/fsirand.1m
+++ b/usr/src/man/man1m/fsirand.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fsirand 1M "16 Sep 1996" "SunOS 5.11" "System Administration Commands"
+.TH FSIRAND 1M "Sep 16, 1996"
 .SH NAME
 fsirand \- install random inode generation numbers
 .SH SYNOPSIS
@@ -28,12 +28,10 @@ afterwards.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 6n
-.rt  
 Print out the generation numbers for all the inodes, but do not change the
 generation numbers.
 .RE
diff --git a/usr/src/man/man1m/fssnap.1m b/usr/src/man/man1m/fssnap.1m
index ad5e7c58a8..fec15a73fe 100644
--- a/usr/src/man/man1m/fssnap.1m
+++ b/usr/src/man/man1m/fssnap.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fssnap 1M "11 Aug 2004" "SunOS 5.11" "System Administration Commands"
+.TH FSSNAP 1M "Aug 11, 2004"
 .SH NAME
 fssnap \- create temporary snapshots of a file system
 .SH SYNOPSIS
@@ -19,7 +19,7 @@ fssnap \- create temporary snapshots of a file system
 
 .LP
 .nf
-\fBfssnap\fR \fB-i\fR [\fB-F\fR \fIFSType\fR] [\fB-V\fR] [\fB-o\fR \fIspecial_options\fR] 
+\fBfssnap\fR \fB-i\fR [\fB-F\fR \fIFSType\fR] [\fB-V\fR] [\fB-o\fR \fIspecial_options\fR]
      [\fI/mount/point\fR | \fIdev\fR]
 .fi
 
@@ -51,23 +51,19 @@ output when a snapshot is created.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 22n
-.rt  
 Deletes the snapshot associated with the given file system.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fIFSType\fR\fR
 .ad
 .RS 22n
-.rt  
 Specifies the file system type to be used. The \fBFSType\fR should either be
 specified here or be determined by matching the block special device with an
 entry in the \fB/etc/vfstab\fR table, or by consulting \fB/etc/default/fs\fR.
@@ -75,12 +71,10 @@ entry in the \fB/etc/vfstab\fR table, or by consulting \fB/etc/default/fs\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 22n
-.rt  
 Displays the state of any given \fBFSType\fR snapshot. If a mount-point or
 device is not given, a list of all snapshots on the system is displayed. When a
 mount-point or device is specified, detailed information is provided for the
@@ -91,23 +85,19 @@ information is file-system dependent. See the \fBFSType\fR-specific
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIspecial_options\fR\fR
 .ad
 .RS 22n
-.rt  
 See the \fBFSType\fR-specific man page for \fBfssnap\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
 .RS 22n
-.rt  
 Echoes the complete command line, but does not execute the command.
 .RE
 
@@ -117,12 +107,10 @@ Echoes the complete command line, but does not execute the command.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fI/mount/point\fR\fR
 .ad
 .RS 16n
-.rt  
 The directory where the file system resides.
 .RE
 
@@ -136,46 +124,38 @@ See \fBFSType\fR-specific man pages for examples.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vfstab\fR\fR
 .ad
 .RS 19n
-.rt  
 Specifies file system type.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/fs\fR\fR
 .ad
 .RS 19n
-.rt  
 Specifies the default local file system type.
 .RE
 
diff --git a/usr/src/man/man1m/fssnap_ufs.1m b/usr/src/man/man1m/fssnap_ufs.1m
index 9f07df4373..51211e2611 100644
--- a/usr/src/man/man1m/fssnap_ufs.1m
+++ b/usr/src/man/man1m/fssnap_ufs.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fssnap_ufs 1M "29 Jan 2007" "SunOS 5.11" "System Administration Commands"
+.TH FSSNAP_UFS 1M "Jan 29, 2007"
 .SH NAME
 fssnap_ufs \- create a temporary snapshot of a UFS file system
 .SH SYNOPSIS
 .LP
 .nf
-\fBfssnap\fR [\fB-F\fR ufs] [\fB-V\fR] \fB-o\fR \fIbacking-store\fR=\fIpath\fR, 
+\fBfssnap\fR [\fB-F\fR ufs] [\fB-V\fR] \fB-o\fR \fIbacking-store\fR=\fIpath\fR,
      [\fIspecific-options\fR] \fI/mount/point\fR
 .fi
 
@@ -50,7 +50,6 @@ an \fBNFS\fR-mounted file system.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -61,7 +60,6 @@ Deletes the snapshot associated with the given file system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
@@ -85,7 +83,6 @@ The following \fB-o\fR options display specific information for a given
 snapshot. See the EXAMPLES section for examples of how to use these options.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsnapnumber\fR\fR
 .ad
@@ -96,7 +93,6 @@ Display the snapshot number.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBblockdevname\fR\fR
 .ad
@@ -107,7 +103,6 @@ Display the block device path.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrawdevname\fR\fR
 .ad
@@ -118,7 +113,6 @@ Display the raw device path.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmountpoint\fR\fR
 .ad
@@ -129,7 +123,6 @@ Display the mount point of the master file system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstate\fR\fR
 .ad
@@ -140,7 +133,6 @@ Display the state of the snapshot device.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbacking-store\fR\fR
 .ad
@@ -153,7 +145,6 @@ the first file, with the suffixes \fB\&.2\fR, \fB\&.3\fR, and so forth.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbacking-store-len\fR\fR
 .ad
@@ -164,7 +155,6 @@ Display the sum of the sizes of the backing-store files.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmaxsize\fR\fR
 .ad
@@ -175,7 +165,6 @@ Display the \fBmaxsize\fR value specified for the backing-store file(s).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcreatetime\fR\fR
 .ad
@@ -186,7 +175,6 @@ Display the time that the snapshot was created.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBchunksize\fR\fR
 .ad
@@ -199,7 +187,6 @@ Display the copy-on-write granularity.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIspecific-options\fR\fR
 .ad
@@ -210,7 +197,6 @@ Specify the following options when creating a snapshot. All of these options
 are discretionary, except for the backing-store file, which is required.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbacking-store=\fR\fIpath\fR\fR
 .ad
@@ -231,7 +217,6 @@ This option can be abbreviated as \fBbf=\fR\fIpath\fR or \fBbs=\fR\fIpath\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunlink\fR\fR
 .ad
@@ -247,7 +232,6 @@ deleted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBchunksize=\fR\fIn\fR [\fBk\fR,\fBm\fR,\fBg\fR]\fR
 .ad
@@ -263,7 +247,6 @@ the block size of the file system (typically \fB32k\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmaxsize=\fR\fIn\fR[\fBk\fR,\fBm\fR,\fBg\fR]\fR
 .ad
@@ -280,7 +263,6 @@ for megabytes, or \fBg\fR for gigabytes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBraw\fR\fR
 .ad
@@ -301,7 +283,6 @@ Both devices are always created. This option affects only the output.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fImount-point\fR\fR
 .ad
@@ -312,7 +293,6 @@ The directory where the file system resides.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIspecial\fR\fR
 .ad
@@ -351,7 +331,7 @@ removed in the second command.
 .sp
 .in +2
 .nf
-# ufsdump 0uf /dev/rmt/0 `fssnap -F ufs 
+# ufsdump 0uf /dev/rmt/0 `fssnap -F ufs
       -o raw,bs=/export/snap /export/home`
 \fI<output from ufsdump>\fR
 # fssnap -F ufs -d /export/home
@@ -371,9 +351,9 @@ system snapshot.
 .in +2
 .nf
 # ufsdump 0uf /dev/rmt/0 `fssnap -F ufs
-      -o maxsize=400m,backing-store=/export/snap,raw 
-      /export/home` 
-# fssnap -F ufs -d /export/home 
+      -o maxsize=400m,backing-store=/export/snap,raw
+      /export/home`
+# fssnap -F ufs -d /export/home
 .fi
 .in -2
 .sp
@@ -391,7 +371,7 @@ flag.
 .sp
 .in +2
 .nf
-# ufsdump lfNu /dev/rmt/0 /dev/rdsk/c0t3d0s2 `fssnap -F ufs 
+# ufsdump lfNu /dev/rmt/0 /dev/rdsk/c0t3d0s2 `fssnap -F ufs
 -o raw,bs=/export/scratch,unlink /var`
 .fi
 .in -2
@@ -407,7 +387,7 @@ The following command displays the currently existing snapshots.
 .in +2
 .nf
 # fssnap -i
-0  /src  
+0  /src
 1  /export/home
 \fI<output continues>\fR
 .fi
@@ -425,9 +405,9 @@ system snapshot, mount it on \fB/tmp/mount\fR for temporary read-only access.
 .in +2
 .nf
 # fssnap -F ufs -o backing-store=/nfs/server/scratch /export/home
-/dev/fssnap/1 
-# mkdir /tmp/mount 
-# mount -F ufs -o ro /dev/fssnap/1 /tmp/mount  
+/dev/fssnap/1
+# mkdir /tmp/mount
+# mount -F ufs -o ro /dev/fssnap/1 /tmp/mount
 .fi
 .in -2
 .sp
@@ -445,18 +425,18 @@ backing-store file, check the state of the snapshot.
 .in +2
 .nf
 # fssnap -o bs=/scratch,unlink /src
-/dev/fssnap/0 
-# fssnap -i /src 
-Snapshot number               : 0 
-Block Device                  : /dev/fssnap/0 
-Raw Device                    : /dev/rfssnap/0 
-Mount point                   : /src 
-Device state                  : active 
-Backing store path            : /scratch/snapshot2 <UNLINKED> 
-Backing store size            : 192 KB 
-Maximum backing store size    : Unlimited 
-Snapshot create time          : Sat May 06 10:55:11 2000 
-Copy-on-write granularity     : 32 KB 
+/dev/fssnap/0
+# fssnap -i /src
+Snapshot number               : 0
+Block Device                  : /dev/fssnap/0
+Raw Device                    : /dev/rfssnap/0
+Mount point                   : /src
+Device state                  : active
+Backing store path            : /scratch/snapshot2 <UNLINKED>
+Backing store size            : 192 KB
+Maximum backing store size    : Unlimited
+Snapshot create time          : Sat May 06 10:55:11 2000
+Copy-on-write granularity     : 32 KB
 .fi
 .in -2
 .sp
@@ -473,9 +453,9 @@ the \fB/test\fR file system.
 .sp
 .in +2
 .nf
-# fssnap -i -o backing-store-len,backing-store,createtime /test 
-196608 
-/snapshot2 
+# fssnap -i -o backing-store-len,backing-store,createtime /test
+196608
+/snapshot2
 Sat May 6 10:55:11 2000
 .fi
 .in -2
@@ -493,7 +473,6 @@ they will have names of the form \fIfile\fR (for the first file), \fIfile\fR.1,
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -504,7 +483,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB>\fB0\fR\fR
 .ad
diff --git a/usr/src/man/man1m/fsstat.1m b/usr/src/man/man1m/fsstat.1m
index cd120fb8a4..fce7a1bf64 100644
--- a/usr/src/man/man1m/fsstat.1m
+++ b/usr/src/man/man1m/fsstat.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fsstat 1M "5 Jan 2007" "SunOS 5.11" "System Administration Commands"
+.TH FSSTAT 1M "Jan 5, 2007"
 .SH NAME
 fsstat \- report file system statistics
 .SH SYNOPSIS
 .LP
 .nf
-\fBfsstat\fR [\fB-a|f|i|n|v\fR] [\fB-T\fR | u|d] {\fB-F\fR | {\fIfstype\fR|\fIpath\fR}...} 
+\fBfsstat\fR [\fB-a|f|i|n|v\fR] [\fB-T\fR | u|d] {\fB-F\fR | {\fIfstype\fR|\fIpath\fR}...}
      [\fIinterval\fR [\fIcount\fR]]
 .fi
 
@@ -45,34 +45,28 @@ the units in a human readable form that fits in a maximum of 5 characters. For
 example:
 .sp
 .ne 2
-.mk
 .na
 \fB100\fR
 .ad
 .RS 11n
-.rt  
 is displayed as 100
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB2048\fR
 .ad
 .RS 11n
-.rt  
 is displayed as 2K
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB3000000\fR
 .ad
 .RS 11n
-.rt  
 is displayed as 2.86M
 .RE
 
@@ -110,123 +104,101 @@ The default report shows general file system activity. This display combines
 similar operations into general categories as follows:
 .sp
 .ne 2
-.mk
 .na
 \fBnew file\fR
 .ad
 .RS 15n
-.rt  
 Number of creation operations for file system objects (for example, files,
 directories, symlinks, etc.)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBname remov\fR
 .ad
 .RS 15n
-.rt  
 Number of name removal operations
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBname chng\fR
 .ad
 .RS 15n
-.rt  
 Number of name change operations
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBattr get\fR
 .ad
 .RS 15n
-.rt  
 Number of object attribute retrieval operations
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBattr set\fR
 .ad
 .RS 15n
-.rt  
 Number of object attribute change operations
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBlookup ops\fR
 .ad
 .RS 15n
-.rt  
 Number of object lookup operations
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBrddir ops\fR
 .ad
 .RS 15n
-.rt  
 Number of read directory operations
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBread ops\fR
 .ad
 .RS 15n
-.rt  
 Number of data read operations
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBread bytes\fR
 .ad
 .RS 15n
-.rt  
 Bytes transferred by data read operations
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBwrite ops\fR
 .ad
 .RS 15n
-.rt  
 Number of data write operations
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBwrite bytes\fR
 .ad
 .RS 15n
-.rt  
 Bytes transferred by data write operations
 .RE
 
@@ -240,55 +212,45 @@ last column.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 10n
-.rt  
 Report the activity for kernel attribute operations. The following statistics
 are reported:
 .sp
 .ne 2
-.mk
 .na
 \fBgetattr\fR
 .ad
 .RS 11n
-.rt  
 Number of file attribute retrieval calls
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBsetattr\fR
 .ad
 .RS 11n
-.rt  
 Number of file attribute modification calls
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBgetsec\fR
 .ad
 .RS 11n
-.rt  
 Number of file security attribute retrieval calls
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBsetsec\fR
 .ad
 .RS 11n
-.rt  
 Number of file security attribute modification calls
 .RE
 
@@ -298,34 +260,28 @@ last column.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 10n
-.rt  
 Report the full activity for all kernel file operations. Each file operation is
 listed in the left column. The following statistics are reported for each
 operation:
 .sp
 .ne 2
-.mk
 .na
 \fB#ops\fR
 .ad
 .RS 9n
-.rt  
 Number of calls for this operation
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBbytes\fR
 .ad
 .RS 9n
-.rt  
 Average transfer size in bytes (only applies to read, write, readdir)
 .RE
 
@@ -335,99 +291,81 @@ first row.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 10n
-.rt  
 Reports the activity for kernel I/O operations. The following statistics are
 reported:
 .sp
 .ne 2
-.mk
 .na
 \fBread ops\fR
 .ad
 .RS 15n
-.rt  
 Number of data read calls
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBread bytes\fR
 .ad
 .RS 15n
-.rt  
 Number of bytes read
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBwrite ops\fR
 .ad
 .RS 15n
-.rt  
 Number of data write calls
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBwrite bytes\fR
 .ad
 .RS 15n
-.rt  
 Number of bytes written
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBrddir ops\fR
 .ad
 .RS 15n
-.rt  
 Number of read directory calls
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBrddir bytes\fR
 .ad
 .RS 15n
-.rt  
 Number of bytes read by reading directories
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBrwlock ops\fR
 .ad
 .RS 15n
-.rt  
 Number of internal file system lock operations
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBrwulock ops\fR
 .ad
 .RS 15n
-.rt  
 Number of internal file system unlock operations
 .RE
 
@@ -437,121 +375,99 @@ last column.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 10n
-.rt  
 Reports the activity for kernel naming operations. The following statistics are
 reported:
 .sp
 .ne 2
-.mk
 .na
 \fBlookup\fR
 .ad
 .RS 11n
-.rt  
 Number of file name retrieval calls
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBcreat\fR
 .ad
 .RS 11n
-.rt  
 Number of file creation calls
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBremov\fR
 .ad
 .RS 11n
-.rt  
 Number of file remove calls
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBlink\fR
 .ad
 .RS 11n
-.rt  
 Number of link calls
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBrenam\fR
 .ad
 .RS 11n
-.rt  
 Number of file renaming calls
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBmkdir\fR
 .ad
 .RS 11n
-.rt  
 Number of directory creation calls
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBrmdir\fR
 .ad
 .RS 11n
-.rt  
 Number of directory removal calls
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBrddir\fR
 .ad
 .RS 11n
-.rt  
 Number of directory read calls
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBsymlink\fR
 .ad
 .RS 11n
-.rt  
 Number of symlink creation calls
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBrdlink\fR
 .ad
 .RS 11n
-.rt  
 Number of symlink read calls
 .RE
 
@@ -561,77 +477,63 @@ last column.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 10n
-.rt  
 Reports the activity for calls to the virtual memory operations. The following
 statistics are reported.
 .sp
 .ne 2
-.mk
 .na
 \fBmap\fR
 .ad
 .RS 10n
-.rt  
 Number of calls mapping a file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBaddmap\fR
 .ad
 .RS 10n
-.rt  
 Number of calls setting additional mapping to a mapped file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBdelmap\fR
 .ad
 .RS 10n
-.rt  
 Number of calls deleting mapping to a file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBgetpag\fR
 .ad
 .RS 10n
-.rt  
 Number of calls retrieving a page of data from a file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBputpag\fR
 .ad
 .RS 10n
-.rt  
 Number of calls writing a page of data to a file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBpagio\fR
 .ad
 .RS 10n
-.rt  
 Number of calls to transfer pages in file system swap files
 .RE
 
@@ -641,23 +543,19 @@ column.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fR
 .ad
 .RS 10n
-.rt  
 Report on all available file system types.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fIu\fR|\fId\fR\fR
 .ad
 .RS 10n
-.rt  
 Display a time stamp.
 .sp
 Specify \fIu\fR for a printed representation of the internal representation of
@@ -671,46 +569,38 @@ time (see \fBtime\fR(2)) Specify \fId\fR for the standard date format. (See
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcount\fR\fR
 .ad
 .RS 12n
-.rt  
 Display only \fIcount\fR reports.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfstype\fR\fR
 .ad
 .RS 12n
-.rt  
 Explicitly specify the file system type(s) to be reported. The file system
 module must be loaded.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIinterval\fR\fR
 .ad
 .RS 12n
-.rt  
 Report once each \fIinterval\fR seconds.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpath\fR\fR
 .ad
 .RS 12n
-.rt  
 Specify the path(s) of the mount point(s) to be reported. If path is not a
 mount point, the mount point containing path will be determined and displayed
 in the output.
@@ -871,35 +761,29 @@ that affect the execution of \fBfsstat\fR: \fBLANG\fR, \fBLC_ALL\fR,
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 A fatal error occurred. A fatal error could be a failed system call or another
 internal error.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Invalid command-line options were specified.
 .RE
 
@@ -911,15 +795,14 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-CSIEnabled
+CSI	Enabled
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/fstyp.1m b/usr/src/man/man1m/fstyp.1m
index d483df2ed8..bd29ad3e56 100644
--- a/usr/src/man/man1m/fstyp.1m
+++ b/usr/src/man/man1m/fstyp.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fstyp 1M "19 Dec 2007" "SunOS 5.11" "System Administration Commands"
+.TH FSTYP 1M "Dec 19, 2007"
 .SH NAME
 fstyp \- determine file system type
 .SH SYNOPSIS
@@ -36,12 +36,10 @@ decisions about subsequent use of a storage device or disk partition.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 Output all available file system attributes. If a file system has been
 successfully identified, and this option is specified, the \fIFSType\fR
 identifier is followed by one or more "name-value" pairs, one per line, in the
@@ -101,12 +99,10 @@ In addition to the \fIFSType\fR-specific attributes, the following generic
 attributes may be present:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIgen_clean\fR\fR
 .ad
 .RS 13n
-.rt  
 Allowable values are "true" or "false". If the value is "false", the file
 system is damaged or was not unmounted cleanly and the \fBfsck\fR(1M) command
 must be run before this file system can be mounted.
@@ -114,34 +110,28 @@ must be run before this file system can be mounted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIgen_guid\fR\fR
 .ad
 .RS 12n
-.rt  
 Globally unique identifier. This string uniquely identifies the file system.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIgen_version\fR\fR
 .ad
 .RS 15n
-.rt  
 A string describing the file system version.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIgen_volume_label\fR\fR
 .ad
 .RS 20n
-.rt  
 Volume label, a human-readable string used to either describe or identify the
 file system.
 .RE
@@ -150,12 +140,10 @@ file system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 Produce verbose output. This is usually information about the file systems
 superblock and varies across different \fIFSTypes\fR. See \fBufs\fR(7FS),
 \fBmkfs_ufs\fR(1M), and \fBtunefs\fR(1M) for details.
diff --git a/usr/src/man/man1m/ftpaddhost.1m b/usr/src/man/man1m/ftpaddhost.1m
index 5db7b97055..00154c490e 100644
--- a/usr/src/man/man1m/ftpaddhost.1m
+++ b/usr/src/man/man1m/ftpaddhost.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ftpaddhost 1M "1 May 2003" "SunOS 5.11" "System Administration Commands"
+.TH FTPADDHOST 1M "May 1, 2003"
 .SH NAME
 ftpaddhost \- set up a virtual FTP host
 .SH SYNOPSIS
@@ -25,24 +25,20 @@ address or the name of a host.
 The \fBftpaddhost\fR script supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR\fR
 .ad
 .RS 14n
-.rt  
 Create a banner for the virtual host. This option is useful to confirm that the
 virtual host is working.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 14n
-.rt  
 Configure complete virtual hosting. This option allows each virtual host to
 have its own version of the \fBftpaccess\fR, \fBftpconversions\fR,
 \fB\fR\fBftpgroups\fR, \fBftphosts\fR, and \fBftpusers\fR files. The master
@@ -55,12 +51,10 @@ file, the master version is used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 14n
-.rt  
 Configure limited virtual hosting. This  option allows a small number of
 parameters to be configured differently for a  virtual host. See the
 \fBvirtual\fR keyword on the \fBftpaccess\fR(4) manual page.
@@ -68,12 +62,10 @@ parameters to be configured differently for a  virtual host. See the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fIxferlog\fR\fR
 .ad
 .RS 14n
-.rt  
 Create a logfile entry such that the transfer logs for the virtual host are
 written to the specified file. An absolute path must be specified for the
 \fIxferlog\fR file.
@@ -85,23 +77,19 @@ written to the specified file. An absolute path must be specified for the
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIhostname\fR\fR
 .ad
 .RS 12n
-.rt  
 The host name or IP address of the virtual server.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIroot_dir\fR\fR
 .ad
 .RS 12n
-.rt  
 The absolute pathname of the directory under which the virtual server is set
 up.
 .RE
@@ -112,41 +100,34 @@ up.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR \fR
 .ad
 .RS 6n
-.rt  
 Successful completion
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 6n
-.rt  
 Improper usage of the command
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 6n
-.rt  
 Command failed
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ftpd/virtual-ftpd/\fIhostname\fR\fR\fR
 .ad
@@ -163,13 +144,12 @@ See \fBattributes\fR(5)  for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ftpconfig.1m b/usr/src/man/man1m/ftpconfig.1m
index 44ac461007..8cec6cee18 100644
--- a/usr/src/man/man1m/ftpconfig.1m
+++ b/usr/src/man/man1m/ftpconfig.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ftpconfig 1M "1 May 2003" "SunOS 5.11" "System Administration Commands"
+.TH FTPCONFIG 1M "May 1, 2003"
 .SH NAME
 ftpconfig \- set up anonymous FTP
 .SH SYNOPSIS
@@ -41,12 +41,10 @@ installed, or the system is upgraded.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fR
 .ad
 .RS 7n
-.rt  
 Create a new or update an existing \fIftpdir\fR without creating or updating
 the \fIftp\fR user account. Use this option when creating guest FTP user
 accounts.
@@ -58,12 +56,10 @@ accounts.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIftpdir\fR\fR
 .ad
 .RS 10n
-.rt  
 The absolute pathname of the directory under which the anonymous FTP area is
 set up.
 .RE
@@ -74,34 +70,28 @@ set up.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR \fR
 .ad
 .RS 6n
-.rt  
 Successful completion
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 6n
-.rt  
 Improper usage of the command
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 6n
-.rt  
 Command failed
 .RE
 
@@ -113,13 +103,12 @@ See \fBattributes\fR(5)  for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ftprestart.1m b/usr/src/man/man1m/ftprestart.1m
index bceffc8822..a21fb6f091 100644
--- a/usr/src/man/man1m/ftprestart.1m
+++ b/usr/src/man/man1m/ftprestart.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ftprestart 1M "1 May 2003" "SunOS 5.11" "System Administration Commands"
+.TH FTPRESTART 1M "May 1, 2003"
 .SH NAME
 ftprestart \- restart previously shutdown FTP Servers
 .SH SYNOPSIS
@@ -27,12 +27,10 @@ area, as well as the system wide shutdown message file.
 The \fBftprestart\fR command supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
 .RS 6n
-.rt  
 Display program copyright and version information, then terminate.
 .RE
 
@@ -60,47 +58,39 @@ ftprestart: /etc/ftpd/shutdown.msg removed.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR \fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ftpd/ftpaccess\fR\fR
 .ad
 .RS 24n
-.rt  
- 
+
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ftpd/ftpservers\fR\fR
 .ad
 .RS 24n
-.rt  
- 
+
 .RE
 
 .SH ATTRIBUTES
@@ -111,13 +101,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityExternal
+Interface Stability	External
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ftpshut.1m b/usr/src/man/man1m/ftpshut.1m
index 34bfd8cd88..da221043fe 100644
--- a/usr/src/man/man1m/ftpshut.1m
+++ b/usr/src/man/man1m/ftpshut.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ftpshut 1M "1 May 2003" "SunOS 5.11" "System Administration Commands"
+.TH FTPSHUT 1M "May 1, 2003"
 .SH NAME
 ftpshut \- close down the FTP Servers at a given time
 .SH SYNOPSIS
 .LP
 .nf
-\fBftpshut\fR [\fB-V\fR] [\fB-v\fR] [\fB-l\fR \fImin\fR] [\fB-d\fR \fImin\fR] \fItime\fR 
+\fBftpshut\fR [\fB-V\fR] [\fB-v\fR] [\fB-l\fR \fImin\fR] [\fB-d\fR \fImin\fR] \fItime\fR
      [\fIwarning-message\fR]...
 .fi
 
@@ -45,133 +45,109 @@ shutdown message file is specified by the \fBshutdown\fR capability in the
 The following magic cookies are available:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%s\fR\fR
 .ad
 .RS 6n
-.rt  
 The time system is going to shut down.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%r\fR\fR
 .ad
 .RS 6n
-.rt  
 The time new connections will be denied.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%d\fR\fR
 .ad
 .RS 6n
-.rt  
 The time current connections will be dropped.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%C\fR\fR
 .ad
 .RS 6n
-.rt  
 The current working directory.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%E\fR\fR
 .ad
 .RS 6n
-.rt  
 The maintainer's email address as defined in the \fBftpaccess\fR file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%F\fR\fR
 .ad
 .RS 6n
-.rt  
 The free space in the partition of \fBCWD\fR, in kilobytes.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%L\fR\fR
 .ad
 .RS 6n
-.rt  
 The local host name.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%M\fR\fR
 .ad
 .RS 6n
-.rt  
 The maximum allowed number of users in this class.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%N\fR\fR
 .ad
 .RS 6n
-.rt  
 The current number of users in this class.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%R\fR\fR
 .ad
 .RS 6n
-.rt  
 The remote host name.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%T\fR\fR
 .ad
 .RS 6n
-.rt  
 The local time (form Thu Nov 15 17:12:42 1990).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%U\fR\fR
 .ad
 .RS 6n
-.rt  
 The username given at login time.
 .RE
 
@@ -181,46 +157,38 @@ The username given at login time.
 The \fBftpshut\fR command supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
 .RS 10n
-.rt  
 Display program copyright and version information, then terminate.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fImin\fR\fR
 .ad
 .RS 10n
-.rt  
 The time ahead of shutdown, in minutes, that existing connections will be
 disconnected upon completion of their current or next (if idle) FTP request.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fImin\fR\fR
 .ad
 .RS 10n
-.rt  
 The time ahead of shutdown, in minutes, that new connections will be refused.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 10n
-.rt  
 Verbose. Output the pathname of the shutdown message files created.
 .RE
 
@@ -230,12 +198,10 @@ Verbose. Output the pathname of the shutdown message files created.
 The \fBftpshut\fR command supports the following operands:
 .sp
 .ne 2
-.mk
 .na
 \fB\fItime\fR\fR
 .ad
 .RS 19n
-.rt  
 The \fItime\fR at which \fBftpshut\fR will bring the FTP Servers down.
 \fItime\fR can have a value of \fBnow\fR, which indicates an immediate
 shutdown. Alternatively, \fItime\fR can specify a future time in one of two
@@ -247,12 +213,10 @@ absolute time format, you can only specify times between now and 23:59.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIwarning-message\fR\fR
 .ad
 .RS 19n
-.rt  
 The message to display that warns of the imminent shutdown. The
 \fIwarning-message\fR will be formatted at 70 characters wide. \fBftpshut\fR
 knows the actual string length of the magic cookies. If no warning-message is
@@ -265,47 +229,39 @@ supplied, the default message "\fBSystem shutdown at %s\fR" is used.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR \fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ftpd/ftpaccess\fR\fR
 .ad
 .RS 24n
-.rt  
- 
+
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ftpd/ftpservers\fR\fR
 .ad
 .RS 24n
-.rt  
- 
+
 .RE
 
 .SH ATTRIBUTES
@@ -316,13 +272,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityExternal
+Interface Stability	External
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/fuser.1m b/usr/src/man/man1m/fuser.1m
index 243e5b323e..66f371e2c8 100644
--- a/usr/src/man/man1m/fuser.1m
+++ b/usr/src/man/man1m/fuser.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fuser 1M "21 Oct 2003" "SunOS 5.11" "System Administration Commands"
+.TH FUSER 1M "Oct 21, 2003"
 .SH NAME
 fuser \- identify users of files and devices
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/fuser\fR [\fB-c\fR | \fB-d\fR | \fB-f\fR] [\fB-nu\fR] [\fB-k\fR | \fB-s\fR \fIsig\fR] \fIfiles\fR 
+\fB/usr/sbin/fuser\fR [\fB-c\fR | \fB-d\fR | \fB-f\fR] [\fB-nu\fR] [\fB-k\fR | \fB-s\fR \fIsig\fR] \fIfiles\fR
      [ [\fB- \fR] [\fB-c\fR | \fB-d\fR | \fB-f\fR] [\fB-nu\fR] [\fB-k\fR | \fB-s\fR \fIsig\fR] \fIfiles\fR] ...
 .fi
 
@@ -24,80 +24,66 @@ Each process \fBID\fR is followed by a letter code. These letter codes are
 interpreted as follows. If the process is using the file as
 .sp
 .ne 2
-.mk
 .na
 \fB\fBc\fR\fR
 .ad
 .RS 5n
-.rt  
 Indicates that the process is using the file as its current directory.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBm\fR\fR
 .ad
 .RS 5n
-.rt  
 Indicates that the process is using a file mapped with \fBmmap\fR(2). See
 \fBmmap\fR(2) for details.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBn\fR\fR
 .ad
 .RS 5n
-.rt  
 Indicates that the process is holding a non-blocking mandatory lock on the
 file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBo\fR\fR
 .ad
 .RS 5n
-.rt  
 Indicates that the process is using the file as an open file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBr\fR\fR
 .ad
 .RS 5n
-.rt  
 Indicates that the process is using the file as its root directory.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBt\fR\fR
 .ad
 .RS 5n
-.rt  
 Indicates that the process is using the file as its text file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBy\fR\fR
 .ad
 .RS 5n
-.rt  
 Indicates that the process is using the file as its controlling terminal.
 .RE
 
@@ -143,24 +129,20 @@ process.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 10n
-.rt  
 Reports on files that are mount points for file systems, and any files within
 that mounted file system.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 10n
-.rt  
 Report device usage information for all minor nodes bound to the same device
 node as the specified minor node. This option does not report file usage for
 files within a mounted file system.
@@ -168,23 +150,19 @@ files within a mounted file system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 10n
-.rt  
 Prints a report for the named file, not for files within a mounted file system.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR\fR
 .ad
 .RS 10n
-.rt  
 Sends the \fBSIGKILL\fR signal to each process. Since this option spawns kills
 for each process, the kill messages may not show up immediately (see
 \fBkill\fR(2)). No signals will be sent to kernel file consumers.
@@ -192,23 +170,19 @@ for each process, the kill messages may not show up immediately (see
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 10n
-.rt  
 Lists only processes with non-blocking mandatory locks on a file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsig\fR\fR
 .ad
 .RS 10n
-.rt  
 Sends a signal to each process. The \fIsig\fR option argument specifies one of
 the symbolic names defined in the \fB<signal.h>\fR header, or a decimal integer
 signal number. If \fIsig\fR is a symbolic name, it is recognized in a
@@ -219,12 +193,10 @@ to kernel file consumers.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
 .RS 10n
-.rt  
 Displays the user login name in parentheses following the process \fBID\fR.
 .RE
 
@@ -290,13 +262,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStandard
+Interface Stability	Standard
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/fwflash.1m b/usr/src/man/man1m/fwflash.1m
index a9354fe045..3eac6f8689 100644
--- a/usr/src/man/man1m/fwflash.1m
+++ b/usr/src/man/man1m/fwflash.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fwflash 1M "4 Nov 2008" "SunOS 5.11" "System Administration Commands"
+.TH FWFLASH 1M "Nov 4, 2008"
 .SH NAME
 fwflash \- firmware query and update utility
 .SH SYNOPSIS
@@ -43,7 +43,6 @@ devices.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIdevice_class\fR\fR
 .ad
@@ -58,7 +57,6 @@ defaults to \fBALL\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdev_path\fR\fR
 .ad
@@ -72,7 +70,6 @@ the command fails. If the \fB-d\fR option is specified, then either \fB-f\fR or
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfile1\fR,\fIfile2\fR,\fIfile3\fR,...\fR
 .ad
@@ -94,7 +91,6 @@ correctly activate the new firmware.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -105,7 +101,6 @@ Display the command line usage message for \fBfwflash\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
@@ -125,7 +120,6 @@ target-port worldwide name is displayed, if available.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIfile\fR\fR
 .ad
@@ -142,7 +136,6 @@ operation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -153,7 +146,6 @@ Display \fBfwflash\fR version information and exit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-y\fR\fR
 .ad
@@ -177,7 +169,7 @@ arguments.
 .in +2
 .nf
 example# \fBfwflash\fR
-Usage: 
+Usage:
 Usage:
       fwflash [-l [-c device_class | ALL]] | [-v] | [-h]
       fwflash [-f file1,file2,file3,... | -r file] [-y] -d device_path
@@ -356,7 +348,6 @@ currently supported, please see the \fBNOTES\fR section below.
 The \fBfwflash\fR command returns the following values:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -367,7 +358,6 @@ Success
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
@@ -384,13 +374,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/fwtmp.1m b/usr/src/man/man1m/fwtmp.1m
index b9fd2669c8..7a11b7fb9a 100644
--- a/usr/src/man/man1m/fwtmp.1m
+++ b/usr/src/man/man1m/fwtmp.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH fwtmp 1M "22 Feb 1999" "SunOS 5.11" "System Administration Commands"
+.TH FWTMP 1M "Feb 22, 1999"
 .SH NAME
 fwtmp, wtmpfix \- manipulate connect accounting records
 .SH SYNOPSIS
@@ -52,12 +52,10 @@ that \fBacctcon\fR will fail when processing connect accounting records.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-ic\fR\fR
 .ad
 .RS 7n
-.rt  
 Denotes that input is in ASCII form, and output is to be written in binary
 form.
 .RE
@@ -65,12 +63,10 @@ form.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/wtmpx\fR\fR
 .ad
 .RS 18n
-.rt  
 history of user access and administration information
 .RE
 
diff --git a/usr/src/man/man1m/getdev.1m b/usr/src/man/man1m/getdev.1m
index 5101682d8b..e26d40885b 100644
--- a/usr/src/man/man1m/getdev.1m
+++ b/usr/src/man/man1m/getdev.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH getdev 1M "5 Jul 1990" "SunOS 5.11" "System Administration Commands"
+.TH GETDEV 1M "Jul 5, 1990"
 .SH NAME
 getdev \- lists devices based on criteria
 .SH SYNOPSIS
@@ -35,24 +35,20 @@ list becomes a set of devices to be \fIexcluded\fR from the list. See
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 Specifies that a device must match all criteria to be included in the list
 generated by this command. The option has no effect if no criteria are defined.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
 .RS 6n
-.rt  
 Specifies that the list of devices which follows on the command line should be
 \fIexcluded\fR from the list generated by this command. Without the \fB-e\fR
 the named devices are \fIincluded\fR in the generated list. The flag has no
@@ -65,12 +61,10 @@ effect if no devices are defined.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcriteria\fR\fR
 .ad
 .RS 12n
-.rt  
 Defines the criteria that a device must match to be included in the generated
 list. \fIcriteria\fR is specified by expressions.
 .sp
@@ -78,47 +72,39 @@ There are four possible expression types which the criteria specified in the
 \fIcriteria\fR argument may follow:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIattribute\fR\fB=\fR\fIvalue\fR\fR
 .ad
 .RS 20n
-.rt  
 Selects all devices whose attribute \fIattribute\fR is defined and is equal to
 \fIvalue\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIattribute\fR\fB!=\fR\fIvalue\fR\fR
 .ad
 .RS 20n
-.rt  
 Selects all devices whose attribute \fIattribute\fR is defined and does not
 equal \fIvalue\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIattribute\fR\fB:*\fR\fR
 .ad
 .RS 20n
-.rt  
 Selects all devices which have the attribute \fIattribute\fR defined.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIattribute\fR\fB!:*\fR\fR
 .ad
 .RS 20n
-.rt  
 Selects all devices which do not have the attribute \fIattribute\fR defined.
 .RE
 
@@ -128,12 +114,10 @@ available attributes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdevice\fR\fR
 .ad
 .RS 12n
-.rt  
 Defines the devices which should be included in the generated list. This can be
 the pathname of the device or the device alias.
 .RE
@@ -144,47 +128,39 @@ the pathname of the device or the device alias.
 The  following  exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Command syntax was incorrect, invalid option was used, or an internal error
 occurred.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Device table could not be opened for reading.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/device.tab\fR\fR
 .ad
 .RS 19n
-.rt  
 
 .RE
 
diff --git a/usr/src/man/man1m/getdevpolicy.1m b/usr/src/man/man1m/getdevpolicy.1m
index afa0ac36e1..d4dd4cb675 100644
--- a/usr/src/man/man1m/getdevpolicy.1m
+++ b/usr/src/man/man1m/getdevpolicy.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH getdevpolicy 1M "9 Apr 2004" "SunOS 5.11" "System Administration Commands"
+.TH GETDEVPOLICY 1M "Apr 9, 2004"
 .SH NAME
 getdevpolicy \- inspect the system's device policy
 .SH SYNOPSIS
@@ -33,23 +33,19 @@ permissions.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR \fR
 .ad
 .RS 12n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnon-zero\fR\fR
 .ad
 .RS 12n
-.rt  
 An error occurred.
 .RE
 
@@ -61,13 +57,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below
+Interface Stability	See below
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/getdgrp.1m b/usr/src/man/man1m/getdgrp.1m
index 2eda9fe8a5..87f7f71a74 100644
--- a/usr/src/man/man1m/getdgrp.1m
+++ b/usr/src/man/man1m/getdgrp.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH getdgrp 1M "5 Jul 1990" "SunOS 5.11" "System Administration Commands"
+.TH GETDGRP 1M "Jul 5, 1990"
 .SH NAME
 getdgrp \- lists device groups which contain devices that match criteria
 .SH SYNOPSIS
@@ -24,24 +24,20 @@ the given criteria. The criteria is given in the form of expressions.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 Specifies that a device must match all criteria to be included in the list
 generated by this command. The option has no effect if no criteria are defined.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
 .RS 6n
-.rt  
 Specifies that the list of device groups on the command line should be
 \fIexcluded\fR from the list generated by this command. Without the  \fB-e\fR
 option the named device groups are  \fIincluded\fR in  the generated list. The
@@ -50,12 +46,10 @@ flag has no effect if no devices are defined.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 6n
-.rt  
 Specifies that all device groups (subject to the  \fB-e\fR option and the
 \fIdgroup\fR list) should be listed even if they contain no valid device
 members. This option has no affect if  \fIcriteria\fR is specified on the
@@ -68,12 +62,10 @@ command line.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcriteria\fR\fR
 .ad
 .RS 12n
-.rt  
 Defines criteria that a device must match before a device group to which it
 belongs can be included in the generated list. Specify \fIcriteria\fR as an
 expression or a list of expressions which a device must meet for its group to
@@ -89,48 +81,40 @@ There are four possible expressions types which the criteria specified in the
 \fIcriteria\fR argument may follow:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIattribute\fR\fB=\fR\fIvalue\fR\fR
 .ad
 .RS 20n
-.rt  
 Selects all device groups with a member whose attribute  \fIattribute\fR is
 defined and is equal to  \fIvalue\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIattribute\fR\fB!=\fR\fIvalue\fR\fR
 .ad
 .RS 20n
-.rt  
 Selects all device groups with a member whose attribute  \fIattribute\fR is
 defined and does not equal  \fIvalue\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIattribute\fR\fB:*\fR\fR
 .ad
 .RS 20n
-.rt  
 Selects all device groups with a member which has the  attribute
 \fIattribute\fR defined.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIattribute\fR\fB!:*\fR\fR
 .ad
 .RS 20n
-.rt  
 Selects all device groups with a member  which does not have the attribute
 \fIattribute\fR defined.
 .RE
@@ -141,12 +125,10 @@ attributes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdgroup\fR\fR
 .ad
 .RS 12n
-.rt  
 Defines a set of device groups which should be included in or excluded from the
 generated list. Device groups that are defined and which contain devices
 matching  the criteria are included.
@@ -163,58 +145,48 @@ which match the criteria and are not in the command line list.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion of the task.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Command syntax was incorrect, invalid option was used, or an internal error
 occurred.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Device table or device group table could not be opened for reading.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/device.tab\fR\fR
 .ad
 .RS 19n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dgroup.tab\fR\fR
 .ad
 .RS 19n
-.rt  
 
 .RE
 
diff --git a/usr/src/man/man1m/getent.1m b/usr/src/man/man1m/getent.1m
index 180c81aa59..a59ea25d8a 100644
--- a/usr/src/man/man1m/getent.1m
+++ b/usr/src/man/man1m/getent.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH getent 1M "26 Mar 2007" "SunOS 5.11" "System Administration Commands"
+.TH GETENT 1M "Mar 26, 2007"
 .SH NAME
 getent \- get entries from administrative database
 .SH SYNOPSIS
@@ -94,157 +94,129 @@ group name and searches the \fBgroup\fR database for a matching group name.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Command syntax was incorrect, an invalid option was used, or an internal error
 occurred.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 At least one of the specified entry names was not found in the database.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 5n
-.rt  
 There is no support for enumeration on this database.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/nsswitch.conf\fR\fR
 .ad
 .RS 22n
-.rt  
 name service switch configuration file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/passwd\fR\fR
 .ad
 .RS 22n
-.rt  
 password file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/group\fR\fR
 .ad
 .RS 22n
-.rt  
 group file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/hosts\fR\fR
 .ad
 .RS 22n
-.rt  
 IPv4 and IPv6 host name database
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/services\fR\fR
 .ad
 .RS 22n
-.rt  
 Internet services and aliases
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/project\fR\fR
 .ad
 .RS 22n
-.rt  
 project file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/protocols\fR\fR
 .ad
 .RS 22n
-.rt  
 protocol name database
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ethers\fR\fR
 .ad
 .RS 22n
-.rt  
 Ethernet address to hostname database or domain
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/networks\fR\fR
 .ad
 .RS 22n
-.rt  
 network name database
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/netmasks\fR\fR
 .ad
 .RS 22n
-.rt  
 network mask database
 .RE
 
diff --git a/usr/src/man/man1m/gettable.1m b/usr/src/man/man1m/gettable.1m
index 7fc0622458..66d09f23e7 100644
--- a/usr/src/man/man1m/gettable.1m
+++ b/usr/src/man/man1m/gettable.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH gettable 1M "14 Sep 1992" "SunOS 5.11" "System Administration Commands"
+.TH GETTABLE 1M "Sep 14, 1992"
 .SH NAME
 gettable \- get DoD Internet format host table from a host
 .SH SYNOPSIS
diff --git a/usr/src/man/man1m/getty.1m b/usr/src/man/man1m/getty.1m
index 3e08b5e8ff..b304d67334 100644
--- a/usr/src/man/man1m/getty.1m
+++ b/usr/src/man/man1m/getty.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH getty 1M "14 Sep 1992" "SunOS 5.11" "System Administration Commands"
+.TH GETTY 1M "Sep 14, 1992"
 .SH NAME
 getty \- set terminal type, modes, speed, and line discipline
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/saf/ttymon\fR [\fB-h\fR] [\fB-t\fR \fItimeout\fR] \fIline\fR 
+\fB/usr/lib/saf/ttymon\fR [\fB-h\fR] [\fB-t\fR \fItimeout\fR] \fIline\fR
      [\fIspeed\fR [\fItype\fR [\fIlinedisc\fR]]]
 .fi
 
@@ -49,36 +49,30 @@ determined by what it finds in \fB/etc/ttydefs \fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 14n
-.rt  
 If the \fB-h\fR flag is not set, a hangup will be forced by setting the speed
 to zero before setting the speed to the default or a specified speed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fI timeout\fR\fR
 .ad
 .RS 14n
-.rt  
 Specifies that \fBgetty\fR should exit if the open on the line succeeds and no
 one types anything in  \fItimeout\fR seconds.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fI file\fR\fR
 .ad
 .RS 14n
-.rt  
 The \fB-c\fR option is no longer supported. Instead use
 \fB/usr/sbin/sttydefs\fR \fB-l\fR to list the contents of the
 \fB/etc/ttydefs\fR file and perform a validity check on the file.
@@ -90,12 +84,10 @@ The \fB-c\fR option is no longer supported. Instead use
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIline\fR\fR
 .ad
 .RS 21n
-.rt  
 The name of a  \fBTTY\fR line in  \fB/dev\fR to which \fBgetty\fR is to attach
 itself. \fBgetty\fR uses this string as the name of a file in the \fB/dev\fR
 directory to open for reading and writing.
@@ -103,12 +95,10 @@ directory to open for reading and writing.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIspeed\fR\fR
 .ad
 .RS 21n
-.rt  
 The  \fIspeed\fR argument is a label to a speed and  \fBTTY\fR definition in
 the file \fB/etc/ttydefs\fR. This definition tells \fBgetty\fR at what speed to
 run initially,  what the initial \fBTTY\fR settings are, and what speed to try
@@ -118,25 +108,21 @@ inappropriate). The default \fIspeed\fR is 300 baud.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fItype\fR and \fIlinedisc\fR\fR
 .ad
 .RS 21n
-.rt  
 These options are obsolete and will be ignored.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ttydefs\fR\fR
 .ad
 .RS 16n
-.rt  
- 
+
 .RE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/getvol.1m b/usr/src/man/man1m/getvol.1m
index 7e1abbf74a..6ff725922d 100644
--- a/usr/src/man/man1m/getvol.1m
+++ b/usr/src/man/man1m/getvol.1m
@@ -1,9 +1,9 @@
 '\" te
-.\"  Copyright 1989 AT&T   Copyright (c) 1997 Sun Microsystems, Inc.   All Rights Reserved.  
+.\"  Copyright 1989 AT&T   Copyright (c) 1997 Sun Microsystems, Inc.   All Rights Reserved.
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH getvol 1M "5 Jul 1990" "SunOS 5.11" "System Administration Commands"
+.TH GETVOL 1M "Jul 5, 1990"
 .SH NAME
 getvol \- verifies device accessibility
 .SH SYNOPSIS
@@ -30,71 +30,59 @@ information.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 12n
-.rt  
 Runs the command in non-interactive mode. The volume is assumed to be inserted
 upon command invocation.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fI label\fR\fR
 .ad
 .RS 12n
-.rt  
 Specifies that the label  \fIlabel\fR must exist on the inserted volume (can be
 overridden by the \fB-o\fR option).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 12n
-.rt  
 Formats the volume after insertion, using the format command defined for this
 device in the device table.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fR
 .ad
 .RS 12n
-.rt  
 Formats the volume after insertion and places a file system on the device. Also
 uses the format command defined for this device in the device table.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 12n
-.rt  
 Allows the administrator to override a label check.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR\fR
 .ad
 .RS 12n
-.rt  
 Allows administrator to write a new label on the device. User is prompted to
 supply the label text. This option is ineffective if the  \fB-n\fR option is
 enabled.
@@ -102,12 +90,10 @@ enabled.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fI label\fR\fR
 .ad
 .RS 12n
-.rt  
 Specifies that the label  \fIlabel\fR must exist on the device. This option
 should be used in place of the  \fB-l\fR option when the label can only be
 verified by visual means. Use of the option causes a message to be displayed
@@ -121,12 +107,10 @@ asking the administrator to visually verify that the label is indeed
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdevice\fR\fR
 .ad
 .RS 10n
-.rt  
 Specifies the device to be verified for accessibility.
 .RE
 
@@ -136,47 +120,39 @@ Specifies the device to be verified for accessibility.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Command syntax was incorrect, invalid option was used, or an internal error
 occurred.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 5n
-.rt  
 Device table could not be opened for reading.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/device.tab\fR\fR
 .ad
 .RS 19n
-.rt  
 
 .RE
 
diff --git a/usr/src/man/man1m/groupadd.1m b/usr/src/man/man1m/groupadd.1m
index e93043356d..ff69ee008a 100644
--- a/usr/src/man/man1m/groupadd.1m
+++ b/usr/src/man/man1m/groupadd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH groupadd 1M "27 Aug 2008" "SunOS 5.11" "System Administration Commands"
+.TH GROUPADD 1M "Aug 27, 2008"
 .SH NAME
 groupadd \- add (create) a new group definition on the system
 .SH SYNOPSIS
@@ -23,12 +23,10 @@ adding the appropriate entry to the \fB/etc/group\fR file.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR \fIgid\fR\fR
 .ad
 .RS 10n
-.rt  
 Assigns the group id \fIgid\fR for the new group. This group id must be a
 non-negative decimal integer below \fBMAXUID\fR as defined in
 \fB/usr/include/sys/param.h\fR. The group \fBID\fR defaults to the next
@@ -40,12 +38,10 @@ groups, the next default group number will be  \fB201\fR. (Group \fBIDs\fR from
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 10n
-.rt  
 Allows the \fIgid\fR to be duplicated (non-unique).
 .RE
 
@@ -55,12 +51,10 @@ Allows the \fIgid\fR to be duplicated (non-unique).
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIgroup\fR\fR
 .ad
 .RS 9n
-.rt  
 A string consisting of characters from the set of lower case alphabetic
 characters and numeric characters. A warning message will be written if the
 string exceeds \fBMAXGLEN,\fR which is usually set at eight characters. The
@@ -75,68 +69,56 @@ numeric characters or a combination of both, and must not contain a colon
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 6n
-.rt  
 Invalid command syntax. A usage message for the \fBgroupadd\fR command is
 displayed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 6n
-.rt  
 An invalid argument was provided to an option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR\fR
 .ad
 .RS 6n
-.rt  
 The \fIgid\fR is not unique (when  \fB-o\fR option is not used).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB9\fR\fR
 .ad
 .RS 6n
-.rt  
 The \fIgroup\fR is not unique.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB10\fR\fR
 .ad
 .RS 6n
-.rt  
 The  \fB/etc/group\fR file cannot be updated.
 .RE
 
diff --git a/usr/src/man/man1m/groupdel.1m b/usr/src/man/man1m/groupdel.1m
index 3cbcc41c43..91dc792761 100644
--- a/usr/src/man/man1m/groupdel.1m
+++ b/usr/src/man/man1m/groupdel.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH groupdel 1M "27 Aug 2008" "SunOS 5.11" "System Administration Commands"
+.TH GROUPDEL 1M "Aug 27, 2008"
 .SH NAME
 groupdel \- delete a group definition from the system
 .SH SYNOPSIS
@@ -20,12 +20,10 @@ deletes the appropriate entry from the \fB/etc/group\fR file.
 .SH OPERANDS
 .sp
 .ne 2
-.mk
 .na
 \fB\fIgroup\fR\fR
 .ad
 .RS 9n
-.rt  
 An existing group name to be deleted.
 .RE
 
@@ -35,58 +33,48 @@ An existing group name to be deleted.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Success.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 6n
-.rt  
 Invalid command syntax. A usage message for the \fBgroupdel\fR command is
 displayed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB6\fR\fR
 .ad
 .RS 6n
-.rt  
 \fIgroup\fR does not exist.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB10\fR\fR
 .ad
 .RS 6n
-.rt  
 Cannot update the \fB/etc/group\fR file.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/group\fR\fR
 .ad
 .RS 14n
-.rt  
 system file containing group definitions
 .RE
 
diff --git a/usr/src/man/man1m/groupmod.1m b/usr/src/man/man1m/groupmod.1m
index 50bb664499..4de0725555 100644
--- a/usr/src/man/man1m/groupmod.1m
+++ b/usr/src/man/man1m/groupmod.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH groupmod 1M "27 Aug 2008" "SunOS 5.11" "System Administration Commands"
+.TH GROUPMOD 1M "Aug 27, 2008"
 .SH NAME
 groupmod \- modify a group definition on the system
 .SH SYNOPSIS
@@ -23,12 +23,10 @@ modifying the appropriate entry in the \fB/etc/group\fR file.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR \fIgid\fR\fR
 .ad
 .RS 11n
-.rt  
 Specify the new group \fBID\fR for the group. This group \fBID\fR must be a
 non-negative decimal integer less than \fBMAXUID\fR, as defined in
 \fB<param.h>\fR\&. The group \fBID\fR defaults to the next available (unique)
@@ -38,12 +36,10 @@ applications.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fIname\fR\fR
 .ad
 .RS 11n
-.rt  
 Specify the new name for the group.  The \fIname\fR argument is a string of no
 more than eight bytes consisting of characters from the set of lower case
 alphabetic characters and numeric characters.  A warning message will be
@@ -55,12 +51,10 @@ argument must contain at least one character and must not include a colon
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 11n
-.rt  
 Allow the \fIgid\fR to be duplicated (non-unique).
 .RE
 
@@ -70,12 +64,10 @@ Allow the \fIgid\fR to be duplicated (non-unique).
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIgroup\fR\fR
 .ad
 .RS 9n
-.rt  
 An existing group name to be modified.
 .RE
 
@@ -85,91 +77,75 @@ An existing group name to be modified.
 The \fBgroupmod\fR utility exits with one of the following values:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Success.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 6n
-.rt  
 Invalid command syntax. A usage message for the \fBgroupmod\fR command is
 displayed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 6n
-.rt  
 An invalid argument was provided to an option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR\fR
 .ad
 .RS 6n
-.rt  
 \fIgid\fR is not unique (when the \fB-o\fR option is not used).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB6\fR\fR
 .ad
 .RS 6n
-.rt  
 \fIgroup\fR does not exist.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB9\fR\fR
 .ad
 .RS 6n
-.rt  
 \fIname\fR already exists as a group name.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB10\fR\fR
 .ad
 .RS 6n
-.rt  
 Cannot update the \fB/etc/group\fR file.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/group\fR\fR
 .ad
 .RS 14n
-.rt  
 group file
 .RE
 
diff --git a/usr/src/man/man1m/growfs.1m b/usr/src/man/man1m/growfs.1m
index dd2eb1384b..249e63c14b 100644
--- a/usr/src/man/man1m/growfs.1m
+++ b/usr/src/man/man1m/growfs.1m
@@ -4,13 +4,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH growfs 1M "20 Apr 2009" "SunOS 5.11" "System Administration Commands"
+.TH GROWFS 1M "Apr 20, 2009"
 .SH NAME
 growfs \- non-destructively expand a UFS file system
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/growfs\fR [\fB-M\fR \fImount-point\fR] [\fInewfs-options\fR] 
+\fB/usr/sbin/growfs\fR [\fB-M\fR \fImount-point\fR] [\fInewfs-options\fR]
      [\fIraw-device\fR]
 .fi
 
@@ -56,35 +56,29 @@ circumstance, you would have to restore the file system from backups.
 Root privileges are required for all of the following options.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR \fImount-point\fR\fR
 .ad
 .RS 18n
-.rt  
 The file system to be expanded is mounted on \fImount-point\fR. File system
 locking (\fBlockfs\fR) will be used.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fInewfs-options\fR\fR
 .ad
 .RS 18n
-.rt  
 The options are documented in the \fBnewfs\fR man page.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIraw-device\fR\fR
 .ad
 .RS 18n
-.rt  
 Specifies the name of a raw metadevice or raw special device, residing in
 \fB/dev/md/rdsk\fR, or \fB/dev/rdsk\fR, respectively, including the disk slice,
 where you want the file system to be grown.
@@ -206,23 +200,19 @@ access times are not kept when the lock is in effect.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
diff --git a/usr/src/man/man1m/gsscred.1m b/usr/src/man/man1m/gsscred.1m
index 1a7991f4e5..c4d8e07035 100644
--- a/usr/src/man/man1m/gsscred.1m
+++ b/usr/src/man/man1m/gsscred.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH gsscred 1M "11 Feb 2004" "SunOS 5.11" "System Administration Commands"
+.TH GSSCRED 1M "Feb 11, 2004"
 .SH NAME
 gsscred \- add, remove, and list gsscred table entries
 .SH SYNOPSIS
@@ -61,89 +61,73 @@ are returned.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 14n
-.rt  
 Add a table entry.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcomment\fR\fR
 .ad
 .RS 14n
-.rt  
 Insert comment about this table entry.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 14n
-.rt  
 Search table for entry.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fImech\fR\fR
 .ad
 .RS 14n
-.rt  
 Specify the mechanism for which this name is to be translated.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fIuser\fR\fR
 .ad
 .RS 14n
-.rt  
 Specify the optional principal name.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIoid\fR\fR
 .ad
 .RS 14n
-.rt  
 Specify the OID indicating the name type of the user.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 14n
-.rt  
 Remove the entry from the table.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIuid\fR\fR
 .ad
 .RS 14n
-.rt  
 Specify the \fIuid\fR for the \fIuser\fR if the \fIuser\fR is not local.
 .RE
 
@@ -218,23 +202,19 @@ example% \fBgsscred -n bsimpson -l\fR
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -246,13 +226,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/gssd.1m b/usr/src/man/man1m/gssd.1m
index 948355f0c1..1be025e661 100644
--- a/usr/src/man/man1m/gssd.1m
+++ b/usr/src/man/man1m/gssd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH gssd 1M "25 Apr 2007" "SunOS 5.11" "System Administration Commands"
+.TH GSSD 1M "Apr 25, 2007"
 .SH NAME
 gssd \- generates and validates GSS-API tokens for kernel RPC
 .SH SYNOPSIS
@@ -29,23 +29,19 @@ services.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -57,13 +53,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
@@ -82,12 +77,10 @@ The following signal has the specified effect when sent to the server process
 using the \fBkill\fR(1) command:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSIGHUP\fR\fR
 .ad
 .RS 10n
-.rt  
 \fBgssd\fR rereads the \fBgsscred.conf\fR(4) options.
 .RE
 
diff --git a/usr/src/man/man1m/hal-device.1m b/usr/src/man/man1m/hal-device.1m
index c9432fd6c1..e88e202fa9 100644
--- a/usr/src/man/man1m/hal-device.1m
+++ b/usr/src/man/man1m/hal-device.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH hal-device 1M "25 Aug 2006" "SunOS 5.11" "System Administration Commands"
+.TH HAL-DEVICE 1M "Aug 25, 2006"
 .SH NAME
 hal-device \- manage HAL devices
 .SH SYNOPSIS
@@ -26,35 +26,29 @@ properties are read from stdin in \fBlshal(1M)\fR syntax.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR, \fB--add\fR \fIudi\fR\fR
 .ad
 .RS 20n
-.rt  
 Add device specified by Universal Device Identifier \fIudi\fR to HAL's global
 device list.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 20n
-.rt  
 Display usage information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR, \fB--remove\fR \fIudi\fR\fR
 .ad
 .RS 20n
-.rt  
 Remove device specified by Universal Device Identifier \fIudi\fR from HAL's
 global device list.
 .RE
@@ -67,13 +61,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityVolatile
+Interface Stability	Volatile
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/hal-fdi-validate.1m b/usr/src/man/man1m/hal-fdi-validate.1m
index d633871c14..fbacc14419 100644
--- a/usr/src/man/man1m/hal-fdi-validate.1m
+++ b/usr/src/man/man1m/hal-fdi-validate.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH hal-fdi-validate 1M "28 Aug 2006" "SunOS 5.11" "System Administration Commands"
+.TH HAL-FDI-VALIDATE 1M "Aug 28, 2006"
 .SH NAME
 hal-fdi-validate \- validate HAL device information files
 .SH SYNOPSIS
@@ -24,12 +24,10 @@ option is used to specify a different file.
 The following option is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIdtd\fR\fR
 .ad
 .RS 10n
-.rt  
 Specify path to a DTD file.
 .RE
 
@@ -39,12 +37,10 @@ Specify path to a DTD file.
 The \fBhal-fdi-validate\fR command accepts the following operand(s):
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfile\fR [\fIfile\fR...]\fR
 .ad
 .RS 18n
-.rt  
 One or more DTD files to be validated.
 .RE
 
@@ -56,13 +52,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityVolatile
+Interface Stability	Volatile
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/hal-find.1m b/usr/src/man/man1m/hal-find.1m
index 98eb5f20ac..fe37b83703 100644
--- a/usr/src/man/man1m/hal-find.1m
+++ b/usr/src/man/man1m/hal-find.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH hal-find 1M "22 Aug 2006" "SunOS 5.11" "System Administration Commands"
+.TH HAL-FIND 1M "Aug 22, 2006"
 .SH NAME
 hal-find, hal-find-by-capability, hal-find-by-property \- search HAL global
 device list
@@ -35,68 +35,56 @@ list by specified criteria and displays results on the standard output.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--capability\fR \fIcapability\fR\fR
 .ad
 .RS 27n
-.rt  
 HAL device capability to search for.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--help\fR\fR
 .ad
 .RS 27n
-.rt  
 Display list of options.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--key\fR \fIkey\fR\fR
 .ad
 .RS 27n
-.rt  
 The \fIkey\fR to the property that is the basis of the search.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--string\fR \fIvalue\fR\fR
 .ad
 .RS 27n
-.rt  
 The string \fIvalue\fR associated with the property that is the basis of the
 search.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--verbose\fR\fR
 .ad
 .RS 27n
-.rt  
 Verbose mode.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--version\fR\fR
 .ad
 .RS 27n
-.rt  
 Display version and exit.
 .RE
 
@@ -108,13 +96,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityVolatile
+Interface Stability	Volatile
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/hal-get-property.1m b/usr/src/man/man1m/hal-get-property.1m
index d74346c4ac..43c8559469 100644
--- a/usr/src/man/man1m/hal-get-property.1m
+++ b/usr/src/man/man1m/hal-get-property.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH hal-get-property 1M "18 Aug 2006" "SunOS 5.11" "System Administration Commands"
+.TH HAL-GET-PROPERTY 1M "Aug 18, 2006"
 .SH NAME
 hal-get-property, hal-set-property \- get and set HAL device properties
 .SH SYNOPSIS
@@ -42,7 +42,6 @@ and set properties of hardware that conforms to HAL specifications.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--udi\fR \fIudi\fR\fR
 .ad
@@ -53,7 +52,6 @@ Unique device ID.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--key\fR \fIkey\fR\fR
 .ad
@@ -64,7 +62,6 @@ Key of the property to set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--int\fR\fR
 .ad
@@ -76,7 +73,6 @@ Set value to an integer. Accepts decimal or hexadecimal value prefixed with
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--uint64\fR\fR
 .ad
@@ -88,7 +84,6 @@ Set value to an integer. Accepts decimal or hexadecimal value prefixed with
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--string\fR \fIvalue\fR\fR
 .ad
@@ -99,7 +94,6 @@ Set value to a string.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--double\fR \fIvalue\fR\fR
 .ad
@@ -110,7 +104,6 @@ Set value to a floating point number.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--boolean\fR \fIvalue\fR\fR
 .ad
@@ -121,7 +114,6 @@ Set value to a boolean, that is, true or false
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--strlist-pre\fR \fIvalue\fR\fR
 .ad
@@ -132,7 +124,6 @@ Prepend a string to a list.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--strlist-post\fR \fIvalue\fR\fR
 .ad
@@ -143,7 +134,6 @@ Append a string to a list.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--strlist-rem\fR \fIvalue\fR\fR
 .ad
@@ -154,7 +144,6 @@ Remove a string from a list.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--remove\fR \fIvalue\fR\fR
 .ad
@@ -165,7 +154,6 @@ Indicates that the property should be removed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--version\fR\fR
 .ad
@@ -176,7 +164,6 @@ Display version and exit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--help\fR\fR
 .ad
@@ -193,13 +180,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityVolatile
+Interface Stability	Volatile
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/hald.1m b/usr/src/man/man1m/hald.1m
index d3bed0efeb..da1d7f0679 100644
--- a/usr/src/man/man1m/hald.1m
+++ b/usr/src/man/man1m/hald.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH hald 1M "2 Jul 2008" "SunOS 5.11" "System Administration Commands"
+.TH HALD 1M "Jul 2, 2008"
 .SH NAME
 hald \- daemon that supports hardware abstraction layer
 .SH SYNOPSIS
@@ -30,57 +30,47 @@ be specified as SMF properties. See EXAMPLES.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--daemon\fR\fR
 .ad
 .RS 16n
-.rt  
 Run as a daemon.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--help\fR\fR
 .ad
 .RS 16n
-.rt  
 Display usage information and exit.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--use-syslog\fR\fR
 .ad
 .RS 16n
-.rt  
 Display debug messages to \fBsyslog\fR instead of \fBstderr\fR. Use this option
 to record debug messages if HAL runs as daemon.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--verbose\fR\fR
 .ad
 .RS 16n
-.rt  
 Display debug information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--version\fR\fR
 .ad
 .RS 16n
-.rt  
 Display version information and exit.
 .RE
 
@@ -108,23 +98,19 @@ svc:/system/hal> \fBexit\fR
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/hal\fR\fR
 .ad
 .RS 16n
-.rt  
 HAL-related files
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/hal/fdi\fR\fR
 .ad
 .RS 16n
-.rt  
 Device information files
 .RE
 
@@ -136,13 +122,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityVolatile
+Interface Stability	Volatile
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/halt.1m b/usr/src/man/man1m/halt.1m
index 2bb9702695..642e00e83e 100644
--- a/usr/src/man/man1m/halt.1m
+++ b/usr/src/man/man1m/halt.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH halt 1M "2 Nov 2004" "SunOS 5.11" "System Administration Commands"
+.TH HALT 1M "Nov 2, 2004"
 .SH NAME
 halt, poweroff \- stop the processor
 .SH SYNOPSIS
@@ -35,70 +35,58 @@ login accounting file \fB/var/adm/wtmpx\fR. These actions are inhibited if the
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 6n
-.rt  
 Force a system crash dump before rebooting. See \fBdumpadm\fR(1M) for
 information on configuring system crash dumps.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 6n
-.rt  
 Suppress sending a message to the system log daemon, \fBsyslogd\fR(1M), about
 who executed \fBhalt\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 6n
-.rt  
 Prevent the \fBsync\fR(1M) before stopping.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
 .RS 6n
-.rt  
 Quick halt. No graceful shutdown is attempted.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-y\fR\fR
 .ad
 .RS 6n
-.rt  
 Halt the system, even from a dialup terminal.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/wtmpx\fR\fR
 .ad
 .RS 18n
-.rt  
 History of user access and administration information.
 .RE
 
diff --git a/usr/src/man/man1m/hextoalabel.1m b/usr/src/man/man1m/hextoalabel.1m
index 4dddb2f9e0..69a5556f96 100644
--- a/usr/src/man/man1m/hextoalabel.1m
+++ b/usr/src/man/man1m/hextoalabel.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH hextoalabel 1M "20 Jul 2007" "SunOS 5.11" "System Administration Commands"
+.TH HEXTOALABEL 1M "Jul 20, 2007"
 .SH NAME
 hextoalabel \- convert an internal text label to its human readable equivalent
 .SH SYNOPSIS
@@ -32,12 +32,10 @@ are stored in internal databases.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 6n
-.rt  
 Identifies the internal text label as a clearance.
 .RE
 
@@ -47,23 +45,19 @@ Identifies the internal text label as a clearance.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 On success.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 On failure, and writes diagnostics to the standard error file.
 .RE
 
@@ -75,13 +69,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
@@ -92,7 +85,6 @@ MAC policy.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/tsol/label_encodings\fR\fR
 .ad
diff --git a/usr/src/man/man1m/hostconfig.1m b/usr/src/man/man1m/hostconfig.1m
index 37a6bdf3d2..ab28428320 100644
--- a/usr/src/man/man1m/hostconfig.1m
+++ b/usr/src/man/man1m/hostconfig.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH hostconfig 1M "6 Nov 2000" "SunOS 5.11" "System Administration Commands"
+.TH HOSTCONFIG 1M "Nov 6, 2000"
 .SH NAME
 hostconfig \- configure a system's host parameters
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/hostconfig\fR \fB-p\fR \fIprotocol\fR [\fB-d\fR] [ \fB-h\fR] [\fB-n\fR] [\fB-v\fR] 
+\fB/usr/sbin/hostconfig\fR \fB-p\fR \fIprotocol\fR [\fB-d\fR] [ \fB-h\fR] [\fB-n\fR] [\fB-v\fR]
      [\fB-i\fR \fIinterface\fR] [\fB-f\fR \fIhostname\fR]
 .fi
 
@@ -29,69 +29,57 @@ Currently, only one protocol (\fBbootparams\fR) is defined.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 16n
-.rt  
 Enable \fBdebug\fR output.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fI hostname\fR\fR
 .ad
 .RS 16n
-.rt  
 Run the protocol as if this machine were named \fBhostname\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 16n
-.rt  
 Echo the received \fBhostname\fR to \fBstdout\fR, rather than setting
 \fBhostname\fR using the system name directly.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fI interface\fR\fR
 .ad
 .RS 16n
-.rt  
 Use only the named network interface to run the protocol.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 16n
-.rt  
 Run the network protocol, but do not set the acquired parameters into the
 system.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIprotocol\fR\fR
 .ad
 .RS 16n
-.rt  
 Run \fBhostconfig\fR using \fIprotocol\fR. Currently, only one protocol
 (\fBbootparams\fR) is available. This option is required.
 .sp
@@ -102,12 +90,10 @@ the RPC \fBbootparams\fR protocol. This sets the system's  \fBhostname\fR,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 16n
-.rt  
 Enable verbose output.
 .RE
 
diff --git a/usr/src/man/man1m/htable.1m b/usr/src/man/man1m/htable.1m
index 7cdea85035..5060d3b01f 100644
--- a/usr/src/man/man1m/htable.1m
+++ b/usr/src/man/man1m/htable.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH htable 1M "14 Sep 1992" "SunOS 5.11" "System Administration Commands"
+.TH HTABLE 1M "Sep 14, 1992"
 .SH NAME
 htable \- convert DoD Internet format host table
 .SH SYNOPSIS
@@ -37,34 +37,28 @@ which retrieves the DoD Internet host table from a host.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlocalhosts\fR\fR
 .ad
 .RS 17n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlocalnetworks\fR\fR
 .ad
 .RS 17n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlocalgateways\fR\fR
 .ad
 .RS 17n
-.rt  
 
 .RE
 
diff --git a/usr/src/man/man1m/ickey.1m b/usr/src/man/man1m/ickey.1m
index c6fd308ada..003dab71d7 100644
--- a/usr/src/man/man1m/ickey.1m
+++ b/usr/src/man/man1m/ickey.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ickey 1M "7 May 2003" "SunOS 5.11" "System Administration Commands"
+.TH ICKEY 1M "May 7, 2003"
 .SH NAME
 ickey \- install a client key for WAN boot
 .SH SYNOPSIS
@@ -50,12 +50,10 @@ the type \fB-o\fR\ \fBtype=\fR\fIkeytype\fR is required.
 The \fBickey\fR command the following option.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 6n
-.rt  
 Delete the key specified by the \fIkeytype\fR argument.
 .RE
 
@@ -67,12 +65,10 @@ message is printed and \fBickey\fR exits with non-zero status.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/openprom\fR\fR
 .ad
 .RS 17n
-.rt  
 WAN boot key storage driver
 .RE
 
@@ -84,13 +80,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUnstable
+Interface Stability	Unstable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/id.1m b/usr/src/man/man1m/id.1m
index 3f8b9aa42e..68d422ef29 100644
--- a/usr/src/man/man1m/id.1m
+++ b/usr/src/man/man1m/id.1m
@@ -1,13 +1,13 @@
 '\" te
 .\"  Copyright (c) 1992, X/Open Company Limited  All Rights Reserved  Portions Copyright (c) 2006, Sun Microsystems, Inc.  All Rights Reserved
-.\" Sun Microsystems, Inc. gratefully acknowledges The Open Group for permission to reproduce portions of its copyrighted documentation. Original documentation from The Open Group can be obtained online at 
+.\" Sun Microsystems, Inc. gratefully acknowledges The Open Group for permission to reproduce portions of its copyrighted documentation. Original documentation from The Open Group can be obtained online at
 .\" http://www.opengroup.org/bookstore/.
 .\" The Institute of Electrical and Electronics Engineers and The Open Group, have given us permission to reprint portions of their documentation. In the following statement, the phrase "this text" refers to portions of the system documentation. Portions of this text are reprinted and reproduced in electronic form in the Sun OS Reference Manual, from IEEE Std 1003.1, 2004 Edition, Standard for Information Technology -- Portable Operating System Interface (POSIX), The Open Group Base Specifications Issue 6, Copyright (C) 2001-2004 by the Institute of Electrical and Electronics Engineers, Inc and The Open Group. In the event of any discrepancy between these versions and the original IEEE and The Open Group Standard, the original IEEE and The Open Group Standard is the referee document. The original Standard can be obtained online at http://www.opengroup.org/unix/online.html.
 .\"  This notice shall appear on any product containing this material.
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH id 1M "28 Nov 2006" "SunOS 5.11" "System Administration Commands"
+.TH ID 1M "Nov 28, 2006"
 .SH NAME
 id \- return user identity
 .SH SYNOPSIS
@@ -208,12 +208,10 @@ The following options are supported by both \fB/usr/bin/id\fR and
 specified with any of the \fB-G\fR, \fB-g\fR, or \fB-u\fR options.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 6n
-.rt  
 Reports additionally the current project membership of the invoking process.
 The project is reported using the            format:
 .sp
@@ -241,23 +239,19 @@ be mapped by the system into a printable project name, the corresponding
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 Reports user name, user  \fBID\fR and all the groups to which the user belongs.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-G\fR\fR
 .ad
 .RS 6n
-.rt  
 Outputs all different group \fBID\fRs (effective, real and supplementary) only,
 using the format \fB"%u\en"\fR. If there is more than one distinct group
 affiliation, output each such affiliation, using the format \fB" %u"\fR, before
@@ -266,46 +260,38 @@ the \fBNEWLINE\fR character is output.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR\fR
 .ad
 .RS 6n
-.rt  
 Outputs only the effective group \fBID\fR, using the format \fB"%u\en"\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 6n
-.rt  
 Outputs the name in the format \fB"%s"\fR instead of the numeric \fBID\fR using
 the format \fB"%u"\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 6n
-.rt  
 Outputs the real \fBID\fR instead of the effective \fBID\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
 .RS 6n
-.rt  
 Outputs only the effective user \fBID\fR, using the format \fB"%u\en"\fR.
 .RE
 
@@ -315,12 +301,10 @@ Outputs only the effective user \fBID\fR, using the format \fB"%u\en"\fR.
 The following operand is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIuser\fR\fR
 .ad
 .RS 8n
-.rt  
 The user (login) name for which information is to be written.
 .RE
 
@@ -336,23 +320,19 @@ that affect the execution of \fBid\fR: \fBLANG\fR, \fBLC_ALL\fR,
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -365,13 +345,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SS "/usr/xpg4/bin/id"
@@ -379,13 +358,12 @@ Interface StabilityStable
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStandard
+Interface Stability	Standard
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/idmap.1m b/usr/src/man/man1m/idmap.1m
index c6c6f5b8ad..7854c02708 100644
--- a/usr/src/man/man1m/idmap.1m
+++ b/usr/src/man/man1m/idmap.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH idmap 1M "3 Aug 2009" "SunOS 5.11" "System Administration Commands"
+.TH IDMAP 1M "Aug 3, 2009"
 .SH NAME
 idmap \- configure and manage the Native Identity Mapping service
 .SH SYNOPSIS
@@ -375,7 +375,6 @@ property group \fBconfig\fR. They can be accessed and modified using
 The service properties for the \fBidmap\fR service are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconfig/ad_unixuser_attr\fR\fR
 .ad
@@ -387,7 +386,6 @@ no default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconfig/ad_unixgroup_attr\fR\fR
 .ad
@@ -399,7 +397,6 @@ is no default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconfig/nldap_winname_attr\fR\fR
 .ad
@@ -411,7 +408,6 @@ user/group name. There is no default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconfig/directory_based_mapping\fR\fR
 .ad
@@ -441,7 +437,6 @@ effect.
 The \fBidmap\fR command uses the following operands:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIformat\fR\fR
 .ad
@@ -536,7 +531,6 @@ idmap add -d "winuser:*@*" "unixuser:*"
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIidentity\fR\fR
 .ad
@@ -546,111 +540,91 @@ Specifies a user name, user ID, group name, or group ID. \fIidentity\fR is
 specified as \fItype\fR\fB:\fR\fIvalue\fR. \fItype\fR is one of the following:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBusid\fR\fR
 .ad
 .RS 13n
-.rt  
 Windows user SID in text format
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgsid\fR\fR
 .ad
 .RS 13n
-.rt  
 Windows group SID in text format
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsid\fR\fR
 .ad
 .RS 13n
-.rt  
 Windows group SID in text format that can belong either to a user or to a group
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBuid\fR\fR
 .ad
 .RS 13n
-.rt  
 Numeric POSIX UID
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgid\fR\fR
 .ad
 .RS 13n
-.rt  
 Numeric POSIX GID
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunixuser\fR\fR
 .ad
 .RS 13n
-.rt  
 UNIX user name
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunixgroup\fR\fR
 .ad
 .RS 13n
-.rt  
 UNIX group name
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwinuser\fR\fR
 .ad
 .RS 13n
-.rt  
 Windows user name
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwingroup\fR\fR
 .ad
 .RS 13n
-.rt  
 Windows group name
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwinname\fR\fR
 .ad
 .RS 13n
-.rt  
 Windows user or group name
 .RE
 
@@ -662,7 +636,6 @@ the UNIX group \fBstaff\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIname\fR\fR
 .ad
@@ -711,7 +684,6 @@ other arguments or types specified on the command line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fItarget-type\fR\fR
 .ad
@@ -732,7 +704,6 @@ subcommands also have options.
 .SS "Command-Line Option"
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIcommand-file\fR\fR
 .ad
@@ -749,7 +720,6 @@ not used by any subcommands.
 The following subcommands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadd\fR [\fB-d\fR] \fIname1\fR \fIname2\fR\fR
 .ad
@@ -772,7 +742,6 @@ This subcommand requires the \fBsolaris.admin.idmap.rules\fR authorization.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdump\fR [\fB-n\fR] [\fB-v\fR]\fR
 .ad
@@ -786,7 +755,6 @@ generated.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBexport\fR [\fB-f\fR \fIfile\fR] \fIformat\fR\fR
 .ad
@@ -799,7 +767,6 @@ output file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBget-namemap\fR \fIname\fR\fR
 .ad
@@ -811,7 +778,6 @@ user or group object represented by the specified name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhelp\fR\fR
 .ad
@@ -822,7 +788,6 @@ Displays the usage message.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBimport\fR [\fB-F\fR] [\fB-f\fR \fIfile\fR] \fIformat\fR\fR
 .ad
@@ -842,7 +807,6 @@ This subcommand requires the \fBsolaris.admin.idmap.rules\fR authorization.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist\fR\fR
 .ad
@@ -854,7 +818,6 @@ form.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremove\fR [\fB-t\fR|\fB-f\fR] \fIname\fR\fR
 .ad
@@ -872,7 +835,6 @@ This subcommand requires the \fBsolaris.admin.idmap.rules\fR authorization.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremove\fR \fB-a\fR\fR
 .ad
@@ -885,7 +847,6 @@ This subcommand requires the \fBsolaris.admin.idmap.rules\fR authorization.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremove\fR [\fB-d\fR] \fIname1\fR \fIname2\fR\fR
 .ad
@@ -903,7 +864,6 @@ This subcommand requires the \fBsolaris.admin.idmap.rules\fR authorization.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBset-namemap\fR [\fB-a\fR \fIauthenticationMethod\fR] [\fB-D\fR
 \fIbindDN\fR] [\fB-j\fR \fIpasswdfile\fR] \fIname1\fR \fIname2\fR\fR
@@ -922,7 +882,6 @@ represented by \fIname1\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIauthenticationMethod\fR\fR
 .ad
@@ -934,7 +893,6 @@ Specify authentication method when modifying native LDAP entry. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR \fIbindDN\fR\fR
 .ad
@@ -945,7 +903,6 @@ Uses the distinguished name \fIbindDN\fR to bind to the directory.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-j\fR \fIpasswdfile\fR\fR
 .ad
@@ -958,7 +915,6 @@ Specify a file containing the password for authentication to the directory.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshow\fR [\fB-c\fR] [\fB-v\fR] \fIname\fR [\fItarget-type\fR]\fR
 .ad
@@ -978,7 +934,6 @@ mapping was just generated or was retrieved from the cache.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunset-namemap\fR [\fB-a\fR \fIauthenticationMethod\fR] [\fB-D\fR
 \fIbindDN\fR] [\fB-j\fR \fIpasswdfile\fR] \fIname\fR [\fItarget-type\fR]\fR
@@ -1296,23 +1251,19 @@ object representing \fBjoe@example.com\fR.
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred. A diagnostic message is written to standard error.
 .RE
 
@@ -1324,13 +1275,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/idmapd.1m b/usr/src/man/man1m/idmapd.1m
index 4827df8205..715470b231 100644
--- a/usr/src/man/man1m/idmapd.1m
+++ b/usr/src/man/man1m/idmapd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH idmapd 1M "5 June 2007" "SunOS 5.11" "System Administration Commands"
+.TH IDMAPD 1M "Jun 5, 2007"
 .SH NAME
 idmapd \- Native Identity Mapping service daemon
 .SH SYNOPSIS
@@ -23,7 +23,6 @@ The \fBidmap\fR(1M) utility provides a front end to the \fBidmapd\fR daemon.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/idmap/idmap.db\fR\fR
 .ad
@@ -36,7 +35,6 @@ directly.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/run/idmap/idmap.db\fR\fR
 .ad
@@ -55,13 +53,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
@@ -69,7 +66,6 @@ Interface StabilitySee below.
 Interface stability for these components is as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsvc:/system/idmap\fR\fR
 .ad
@@ -80,7 +76,6 @@ Committed
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/idmap/idmap.db\fR\fR
 .ad
@@ -91,7 +86,6 @@ Project Private
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/run/idmap/idmap.db\fR\fR
 .ad
diff --git a/usr/src/man/man1m/idsconfig.1m b/usr/src/man/man1m/idsconfig.1m
index 2dcc19e6bd..e4e15290a6 100644
--- a/usr/src/man/man1m/idsconfig.1m
+++ b/usr/src/man/man1m/idsconfig.1m
@@ -3,14 +3,14 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH idsconfig 1M "18 Oct 2001" "SunOS 5.11" "System Administration Commands"
+.TH IDSCONFIG 1M "Oct 18, 2001"
 .SH NAME
 idsconfig \- prepare an iPlanet Directory Server (iDS) to be populated with
 data and serve LDAP clients
 .SH SYNOPSIS
 .LP
 .nf
-\fB /usr/lib/ldap/idsconfig\fR [\fB-v\fR] [\fB-i\fR \fIinput_configfile\fR] 
+\fB /usr/lib/ldap/idsconfig\fR [\fB-v\fR] [\fB-i\fR \fIinput_configfile\fR]
      [\fB-o\fR \fIoutput_configfile\fR]
 .fi
 
@@ -42,12 +42,10 @@ running this command.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIinput_configfile\fR\fR
 .ad
 .RS 24n
-.rt  
 Specify the file name for \fBidsconfig\fR to use as a configuration file.  This
 file will be read by \fBidsconfig\fR, and the values  in the file will be used
 to configure the server.  Do not manually edit \fIinput_configfile\fR. The
@@ -57,23 +55,19 @@ that the file was created by a previous invocation of the command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIoutput_configfile\fR\fR
 .ad
 .RS 24n
-.rt  
 Create a configuration file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 24n
-.rt  
 Verbose output.
 .RE
 
@@ -83,23 +77,19 @@ Verbose output.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIinput_configfile\fR\fR
 .ad
 .RS 21n
-.rt  
 Name of configuration file for \fBidsconfig\fR to use.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIoutput_configfile\fR\fR
 .ad
 .RS 21n
-.rt  
 Configuration file created by \fBidsconfig\fR.
 .RE
 
@@ -155,23 +145,19 @@ example# \fBidsconfig -v -i config.1\fR
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR \fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -183,13 +169,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/if_mpadm.1m b/usr/src/man/man1m/if_mpadm.1m
index bd26d19c0c..d2fcc32ffe 100644
--- a/usr/src/man/man1m/if_mpadm.1m
+++ b/usr/src/man/man1m/if_mpadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH if_mpadm 1M "5 Jan 2009" "SunOS 5.11" "System Administration Commands"
+.TH IF_MPADM 1M "Jan 5, 2009"
 .SH NAME
 if_mpadm \- administer interfaces in an IP multipathing group
 .SH SYNOPSIS
@@ -46,12 +46,10 @@ outbound IP traffic, and more; see \fBipmpstat\fR(1M).
 The \fBif_mpadm\fR utility supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIifname\fR\fR
 .ad
 .RS 13n
-.rt  
 Offline the IP interface specified by \fIifname\fR. If \fIifname\fR is not in
 an IPMP group, or the offline would cause the IPMP group to lose network
 connectivity, the operation will fail.
@@ -59,12 +57,10 @@ connectivity, the operation will fail.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIifname\fR\fR
 .ad
 .RS 13n
-.rt  
 Undo a previous offline of the IP interface specified by \fIifname\fR. If
 \fIifname\fR is not offline, the operation will fail.
 .RE
@@ -108,13 +104,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUnstable
+Interface Stability	Unstable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ifconfig.1m b/usr/src/man/man1m/ifconfig.1m
index 96fc148f62..abe9e75e62 100644
--- a/usr/src/man/man1m/ifconfig.1m
+++ b/usr/src/man/man1m/ifconfig.1m
@@ -2,13 +2,13 @@
 .\" Copyright (C) 2009, Sun Microsystems, Inc. All Rights Reserved
 .\" Copyright 1989 AT&T
 .\" Copyright (c) 1983 Regents of the University of California. All rights reserved. The Berkeley software License Agreement specifies the terms and conditions for redistribution.
-.TH ifconfig 1M "13 Aug 2009" "SunOS 5.11" "System Administration Commands"
+.TH IFCONFIG 1M "Aug 13, 2009"
 .SH NAME
 ifconfig \- configure network interface parameters
 .SH SYNOPSIS
 .LP
 .nf
-\fBifconfig\fR \fIinterface\fR [\fIaddress_family\fR] [\fIaddress\fR [\fI/prefix_length\fR] 
+\fBifconfig\fR \fIinterface\fR [\fIaddress_family\fR] [\fIaddress\fR [\fI/prefix_length\fR]
  [\fIdest_address\fR]] [\fBaddif\fR \fIaddress\fR [\fI/prefix_length\fR]]
  [\fBremoveif\fR \fIaddress\fR [\fI/prefix_length\fR]] [\fBarp\fR | \fB-arp\fR]
  [\fBauth_algs\fR \fIauthentication algorithm\fR] [\fBencr_algs\fR \fIencryption algorithm\fR]
@@ -20,7 +20,7 @@ ifconfig \- configure network interface parameters
  [modinsert \fImod_name@pos\fR] [modremove \fImod_name@pos\fR]
  [\fBmtu\fR \fIn\fR] [\fBnetmask\fR \fImask\fR] [\fBplumb\fR] [\fBunplumb\fR] [\fBprivate\fR
  | \fB-private\fR] [\fBnud\fR | \fB-nud\fR] [\fBset\fR [\fIaddress\fR] [\fI/netmask\fR]]
- [\fBstandby\fR | \fB-standby\fR] [\fBsubnet\fR \fIsubnet_address\fR] [\fBtdst\fR 
+ [\fBstandby\fR | \fB-standby\fR] [\fBsubnet\fR \fIsubnet_address\fR] [\fBtdst\fR
  \fItunnel_dest_address\fR] [\fBtoken\fR \fIaddress\fR/\fIprefix_length\fR]
  [\fBtsrc\fR \fItunnel_src_address\fR] [\fBtrailers\fR | \fB-trailers\fR]
  [\fBup\fR] [\fBdown\fR] [\fBusesrc\fR [\fIname\fR | none]] [\fBxmit\fR | \fB-xmit\fR]
@@ -66,7 +66,6 @@ control.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaddif\fR \fIaddress\fR\fR
 .ad
@@ -77,7 +76,6 @@ Create the next unused logical interface on the specified physical interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBall-zones\fR\fR
 .ad
@@ -94,7 +92,6 @@ which is part of the \fISolaris Trusted Extensions Reference Manual\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBanycast\fR\fR
 .ad
@@ -106,7 +103,6 @@ flag. See "INTERFACE FLAGS," below, for more information on anycast.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-anycast\fR\fR
 .ad
@@ -118,7 +114,6 @@ Marks the logical interface as not an anycast address by clearing the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBarp\fR\fR
 .ad
@@ -131,7 +126,6 @@ currently implemented for mapping between IPv4 addresses and MAC addresses.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-arp\fR\fR
 .ad
@@ -143,7 +137,6 @@ disabled on an IPMP IP interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBauth_algs\fR \fIauthentication algorithm\fR\fR
 .ad
@@ -162,7 +155,6 @@ security properties, this keyword will not affect the tunnel.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBauto-dhcp\fR\fR
 .ad
@@ -175,7 +167,6 @@ For IPv6, the interface specified must be the zeroth logical interface (the
 physical interface name), which has the link-local address.
 .sp
 .ne 2
-.mk
 .na
 \fBprimary\fR
 .ad
@@ -192,7 +183,6 @@ been configured with data read from the previous primary interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fBwait \fIseconds\fR\fR
 .ad
@@ -207,7 +197,6 @@ The symbolic value \fBforever\fR may be used as well, with obvious meaning.
 
 .sp
 .ne 2
-.mk
 .na
 \fBdrop\fR
 .ad
@@ -221,7 +210,6 @@ plumbed by \fBdhcpagent\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBextend\fR
 .ad
@@ -234,7 +222,6 @@ expires.
 
 .sp
 .ne 2
-.mk
 .na
 \fBinform\fR
 .ad
@@ -247,7 +234,6 @@ address is obtained through mechanisms other than \fBDHCP\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBping\fR
 .ad
@@ -260,7 +246,6 @@ exit status of \fB0\fR means success.
 
 .sp
 .ne 2
-.mk
 .na
 \fBrelease\fR
 .ad
@@ -273,7 +258,6 @@ logical interfaces plumbed by \fBdhcpagent\fR are unplumbed.
 
 .sp
 .ne 2
-.mk
 .na
 \fBstart\fR
 .ad
@@ -284,7 +268,6 @@ Start \fBDHCP\fR on the interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fBstatus\fR
 .ad
@@ -297,7 +280,6 @@ Display the \fBDHCP\fR configuration status of the interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBauto-revarp\fR\fR
 .ad
@@ -310,7 +292,6 @@ RARP; for example, IPoIB (IP over InfiniBand), and on IPv6 interfaces.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbroadcast\fR \fIaddress\fR\fR
 .ad
@@ -345,7 +326,6 @@ the interfaces.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdeprecated\fR\fR
 .ad
@@ -361,7 +341,6 @@ by \fBifconfig\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-deprecated\fR\fR
 .ad
@@ -373,7 +352,6 @@ interface could be used as a source address for outbound packets.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpreferred\fR\fR
 .ad
@@ -391,7 +369,6 @@ address by using a routing protocol.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-preferred\fR\fR
 .ad
@@ -402,7 +379,6 @@ Marks the logical interface as not preferred.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdestination\fR \fIdest_address\fR\fR
 .ad
@@ -413,7 +389,6 @@ Set the destination address for a point-to point interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdhcp\fR\fR
 .ad
@@ -424,7 +399,6 @@ This option is an alias for option \fBauto-dhcp\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdown\fR\fR
 .ad
@@ -453,7 +427,6 @@ because the gateway is unreachable.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBencaplimit\fR \fIn\fR\fR
 .ad
@@ -472,7 +445,6 @@ link property.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-encaplimit\fR\fR
 .ad
@@ -489,7 +461,6 @@ link property.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBencr_auth_algs\fR \fIauthentication algorithm\fR\fR
 .ad
@@ -508,7 +479,6 @@ security properties, this keyword will not affect the tunnel.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBencr_algs\fR \fIencryption algorithm\fR\fR
 .ad
@@ -528,7 +498,6 @@ security properties, this keyword will not affect the tunnel.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBether\fR [ \fIaddress\fR ]\fR
 .ad
@@ -553,7 +522,6 @@ addresses; see \fBin.mpathd\fR(1M).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-failover\fR\fR
 .ad
@@ -568,7 +536,6 @@ not permitted on an IPMP IP interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfailover\fR\fR
 .ad
@@ -581,7 +548,6 @@ MULTIPATHING GROUPS\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgroup\fR [ \fIname\fR |\fB""\fR]\fR
 .ad
@@ -603,7 +569,6 @@ subcommand, which the system will also use as the IPMP group name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBindex\fR \fIn\fR\fR
 .ad
@@ -617,7 +582,6 @@ network interface on the system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipmp\fR\fR
 .ad
@@ -631,7 +595,6 @@ IPMP IP interfaces have the \fBIPMP\fR flag set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmetric\fR \fIn\fR\fR
 .ad
@@ -645,7 +608,6 @@ counted as addition hops to the destination network or host.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmodinsert\fR \fImod_name@pos\fR\fR
 .ad
@@ -674,7 +636,7 @@ example% ifconfig eri0 modlist
 0 arp
 1 ip
 2 ipqos
-3 firewall 
+3 firewall
 4 eri
 .fi
 .in -2
@@ -684,7 +646,6 @@ example% ifconfig eri0 modlist
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmodlist\fR\fR
 .ad
@@ -709,7 +670,6 @@ example% ifconfig eri0 modlist
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmodremove\fR \fImod_name@pos\fR\fR
 .ad
@@ -748,7 +708,6 @@ modules, cannot be removed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmtu\fR \fIn\fR\fR
 .ad
@@ -761,7 +720,6 @@ Ethernet. This option sets the \fBFIXEDMTU\fR flag on the affected interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnetmask\fR \fImask\fR\fR
 .ad
@@ -818,7 +776,6 @@ For both \fBinet\fR and \fBinet6\fR, the same information conveyed by
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnud\fR\fR
 .ad
@@ -830,7 +787,6 @@ physical interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-nud\fR\fR
 .ad
@@ -842,7 +798,6 @@ physical interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBplumb\fR\fR
 .ad
@@ -863,7 +818,6 @@ instead created with the \fBipmp\fR subcommand.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprivate\fR\fR
 .ad
@@ -875,7 +829,6 @@ should not be advertised.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-private\fR\fR
 .ad
@@ -886,7 +839,6 @@ Specify unadvertised interfaces.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremoveif\fR \fIaddress\fR\fR
 .ad
@@ -898,7 +850,6 @@ the \fIaddress\fR specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrouter\fR\fR
 .ad
@@ -912,7 +863,6 @@ interfaces in that IPMP group.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-router\fR\fR
 .ad
@@ -925,7 +875,6 @@ disables it on all IP interfaces in that IPMP group.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBset\fR\fR
 .ad
@@ -936,7 +885,6 @@ Set the \fIaddress\fR, \fIprefix_length\fR or both, for a logical interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstandby\fR\fR
 .ad
@@ -952,7 +900,6 @@ permitted on an IPMP IP interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-standby\fR\fR
 .ad
@@ -963,7 +910,6 @@ Clear \fBSTANDBY\fR on the interface. This is the default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsubnet\fR\fR
 .ad
@@ -974,7 +920,6 @@ Set the subnet \fIaddress\fR for an interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtdst\fR \fItunnel_dest_address\fR\fR
 .ad
@@ -990,7 +935,6 @@ and \fBmodify-iptun\fR subcommands.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBthoplimit\fR \fIn\fR\fR
 .ad
@@ -1008,7 +952,6 @@ property.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtoken\fR \fIaddress\fR/\fIprefix_length\fR\fR
 .ad
@@ -1027,7 +970,6 @@ example% \fBifconfig eri0 inet6 token ::1/64\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtrailers\fR\fR
 .ad
@@ -1040,7 +982,6 @@ flag. It is provided for compatibility, but is ignored.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-trailers\fR\fR
 .ad
@@ -1051,7 +992,6 @@ Disable the use of a "trailer" link level encapsulation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtsrc\fR \fItunnel_src_address\fR\fR
 .ad
@@ -1067,7 +1007,6 @@ and \fBmodify-iptun\fR subcommands.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunplumb\fR\fR
 .ad
@@ -1085,7 +1024,6 @@ interface name will no longer appear in the output of \fBifconfig\fR \fB-a\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBup\fR\fR
 .ad
@@ -1101,7 +1039,6 @@ physical interface to send or receive packets
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBusesrc\fR [ \fIname\fR | \fBnone\fR ]\fR
 .ad
@@ -1155,7 +1092,6 @@ specified by means of \fBusesrc\fR, and vice-versa.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBxmit\fR\fR
 .ad
@@ -1167,7 +1103,6 @@ when the logical interface is up.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-xmit\fR\fR
 .ad
@@ -1179,7 +1114,6 @@ receive packets.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzone\fR \fIzonename\fR\fR
 .ad
@@ -1194,7 +1128,6 @@ exclusive-IP zones.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-zone\fR\fR
 .ad
@@ -1210,7 +1143,6 @@ The \fIinterface\fR operand, as well as address parameters that affect it, are
 described below.
 .sp
 .ne 2
-.mk
 .na
 \fB\fIinterface\fR\fR
 .ad
@@ -1243,7 +1175,6 @@ order. If one of these interface names is given, the commands following it are
 applied to all of the interfaces that match.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -1256,7 +1187,6 @@ address family is supplied, either on the command line or by means of
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -1267,7 +1197,6 @@ Apply the commands to all "down" interfaces in the system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
@@ -1279,7 +1208,6 @@ Configuration Protocol) control.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
@@ -1290,7 +1218,6 @@ Apply the commands to all "up" interfaces in the system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Z\fR\fR
 .ad
@@ -1301,7 +1228,6 @@ Apply the commands to all interfaces in the user's zone.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-4\fR\fR
 .ad
@@ -1312,7 +1238,6 @@ Apply the commands to all IPv4 interfaces.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-6\fR\fR
 .ad
@@ -1325,7 +1250,6 @@ Apply the commands to all IPv6 interfaces.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIaddress_family\fR\fR
 .ad
@@ -1345,7 +1269,6 @@ command line, the command line overrides the \fBDEFAULT_IP\fR settings.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIaddress\fR\fR
 .ad
@@ -1366,7 +1289,6 @@ in the Internet standard colon-separated hexadecimal format represented as
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIprefix_length\fR\fR
 .ad
@@ -1381,7 +1303,6 @@ denotes the number of leading set bits in the netmask.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdest_address\fR\fR
 .ad
@@ -1394,7 +1315,6 @@ other end of a point-to-point link.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fItunnel_dest_address\fR\fR
 .ad
@@ -1408,7 +1328,6 @@ being configured.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fItunnel_src_address\fR\fR
 .ad
@@ -1427,7 +1346,6 @@ The \fBifconfig\fR command supports the following interface flags. The term
 \fBeri0\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBADDRCONF\fR\fR
 .ad
@@ -1444,7 +1362,6 @@ addresses. This flag is specific to IPv6.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBANYCAST\fR\fR
 .ad
@@ -1459,7 +1376,6 @@ address instead of being delivered to all members of the group.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBBROADCAST\fR\fR
 .ad
@@ -1471,7 +1387,6 @@ mutually exclusive
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCoS\fR\fR
 .ad
@@ -1489,7 +1404,6 @@ links that have their \fBdladm\fR(1M) \fBtagmode\fR link property set to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDEPRECATED\fR\fR
 .ad
@@ -1505,7 +1419,6 @@ on all \fBNOFAILOVER\fR addresses, though this may change in a future release.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDHCPRUNNING\fR\fR
 .ad
@@ -1516,7 +1429,6 @@ The logical interface is managed by \fBdhcpagent\fR(1M).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDUPLICATE\fR\fR
 .ad
@@ -1535,7 +1447,6 @@ Setting the interface to \fBdown\fR terminates recovery and removes the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFAILED\fR\fR
 .ad
@@ -1551,7 +1462,6 @@ can be sent or received over any interfaces in that group.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFIXEDMTU\fR\fR
 .ad
@@ -1564,7 +1474,6 @@ dynamic MTU changes that can occur when drivers notify IP of link MTU changes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBINACTIVE\fR\fR
 .ad
@@ -1579,7 +1488,6 @@ indicate that the IP interface has repaired but is not being used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBIPMP\fR\fR
 .ad
@@ -1590,7 +1498,6 @@ Indicates that this is an IPMP IP interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLOOPBACK\fR\fR
 .ad
@@ -1601,7 +1508,6 @@ Indicates that this is the loopback interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMULTI_BCAST\fR\fR
 .ad
@@ -1612,7 +1518,6 @@ Indicates that the broadcast address is used for multicast on this interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMULTICAST\fR\fR
 .ad
@@ -1625,7 +1530,6 @@ multicast.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNOARP\fR\fR
 .ad
@@ -1638,7 +1542,6 @@ flag is specific to IPv4.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNOFAILOVER\fR\fR
 .ad
@@ -1651,7 +1554,6 @@ interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNOLOCAL\fR\fR
 .ad
@@ -1662,7 +1564,6 @@ The interface has no address , just an on-link subnet.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNONUD\fR\fR
 .ad
@@ -1676,7 +1577,6 @@ neighbor is detected to be unreachable. This flag is specific to IPv6.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNORTEXCH\fR\fR
 .ad
@@ -1691,7 +1591,6 @@ routers.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNOXMIT\fR\fR
 .ad
@@ -1703,7 +1602,6 @@ advertise this address.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBOFFLINE\fR\fR
 .ad
@@ -1716,7 +1614,6 @@ is only set on IP interfaces in an IPMP group. See \fBif_mpadm\fR(1M) and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPOINTOPOINT\fR\fR
 .ad
@@ -1728,7 +1625,6 @@ Indicates that the address is a point-to-point link. This flag and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPREFERRED\fR\fR
 .ad
@@ -1742,7 +1638,6 @@ another address on the system is of more appropriate scope. The
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPRIVATE\fR\fR
 .ad
@@ -1755,7 +1650,6 @@ included in advertisements to other routers.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPROMISC\fR\fR
 .ad
@@ -1768,7 +1662,6 @@ response to \fBifconfig\fR \fB-a\fR, for example) the \fBPROMISC\fR flag.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBROUTER\fR\fR
 .ad
@@ -1779,7 +1672,6 @@ Indicates that IP packets can be forwarded to and from the interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRUNNING\fR\fR
 .ad
@@ -1792,7 +1684,6 @@ interfaces this also indicates that the link is up. For IPMP IP interfaces,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSTANDBY\fR\fR
 .ad
@@ -1805,7 +1696,6 @@ another interface in the IPMP group becomes unusable. The \fBINACTIVE\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTEMPORARY\fR\fR
 .ad
@@ -1816,7 +1706,6 @@ Indicates that this is a temporary IPv6 address as defined in RFC 3041.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBUNNUMBERED\fR\fR
 .ad
@@ -1828,7 +1717,6 @@ address of some other link in the system
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBUP\fR\fR
 .ad
@@ -1843,7 +1731,6 @@ addresses. Similarly, the IP module will allow packets to be sent with an
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBVIRTUAL\fR\fR
 .ad
@@ -1857,7 +1744,6 @@ multiple interfaces. (See also the \fBusesrc\fR option.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBXRESOLV\fR\fR
 .ad
@@ -2041,7 +1927,7 @@ The following example shows that the link-local address has a prefix of
 .nf
 example% \fBifconfig eri0 inet6\fR
 ce0: flags=2000841<UP,RUNNING,MULTICAST,IPv6>
-           mtu 1500 index 2 \ 
+           mtu 1500 index 2 \
         inet6 fe80::a00:20ff:fe8e:f3ad/10
 .fi
 .in -2
@@ -2139,34 +2025,28 @@ names will implicitly result in the creation of tunnel links without invoking
 \fBdladm create-iptun\fR. These tunnel names are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBip.tun\fR\fIN\fR\fR
 .ad
 .RS 15n
-.rt  
 An IPv4 tunnel
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBip6.tun\fR\fIN\fR\fR
 .ad
 .RS 15n
-.rt  
 An IPv6 tunnel
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBip.6to4tun\fR\fIN\fR\fR
 .ad
 .RS 15n
-.rt  
 A 6to4 tunnel
 .RE
 
@@ -2582,7 +2462,6 @@ example% \fBifconfig hme0 dhcp release\fR
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/netmasks\fR\fR
 .ad
@@ -2593,7 +2472,6 @@ Netmask data.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/inet_type\fR\fR
 .ad
@@ -2610,17 +2488,16 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.73i) |cw(2.77i) 
-lw(2.73i) |lw(2.77i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
 T{
 Interface Stability for command-line options
-T}Committed
+T}	Committed
 _
-Interface Stability for command outputUncommitted
+Interface Stability for command output	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ifparse.1m b/usr/src/man/man1m/ifparse.1m
index 23c24b0e18..c55283522b 100644
--- a/usr/src/man/man1m/ifparse.1m
+++ b/usr/src/man/man1m/ifparse.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ifparse 1M "9 May 2001" "SunOS 5.11" "System Administration Commands"
+.TH IFPARSE 1M "May 9, 2001"
 .SH NAME
 ifparse \- parse \fBifconfig\fR command line
 .SH SYNOPSIS
@@ -25,24 +25,20 @@ series of substrings, one per line.
 The \fBifparse\fR command supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 6n
-.rt  
 Lists only substrings of the \fBifconfig\fR command line that are relevant to
 IP network multipath failover
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 6n
-.rt  
  Lists only substrings of the \fBifconfig\fR command line that are not relevant
 to IP network multipath failover
 .RE
@@ -112,13 +108,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Stability LevelObsolete
+Stability Level	Obsolete
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/iiadm.1m b/usr/src/man/man1m/iiadm.1m
index 7034d76a64..5ef34526bd 100644
--- a/usr/src/man/man1m/iiadm.1m
+++ b/usr/src/man/man1m/iiadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH iiadm 1M "2 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH IIADM 1M "Oct 2, 2007"
 .SH NAME
 iiadm \- command-line interface to control Sun StorageTek Availability Suite
 Point-in-Time Copy operations
@@ -211,23 +211,19 @@ The \fBii_bitmap\fR variable in the \fB/usr/kernel/drv/ii.conf\fR configuration
 file determines the bitmap volume operational semantics as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 13n
-.rt  
 Indicates that the bitmap is maintained in memory only or resume operation.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 13n
-.rt  
 Indicates that the bitmap is maintained in memory and on disk. This is the
 default value.
 .RE
@@ -247,34 +243,28 @@ file determines the amount of information logging that is output to the system
 console \fB/dev/console\fR during Point-in-Time Copy processing.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 13n
-.rt  
 Indicates that no logging is sent to the system console.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 13n
-.rt  
 Indicates that informational logging is sent to the system console.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 13n
-.rt  
 Indicates that developmental logging is sent to the system console.
 .RE
 
@@ -284,7 +274,6 @@ Indicates that developmental logging is sent to the system console.
 The \fBiiadm\fR utility supports the following options.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fB{ind|dep}\fR \fImaster_vol shadow_vol bitmap_vol\fR\fR
 .ad
@@ -324,7 +313,6 @@ known by for all \fBiiadm\fR options requiring specification of a
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIvolume_set\fR\fR
 .ad
@@ -355,7 +343,6 @@ copy to complete:
 
 .sp
 .ne 2
-.mk
 .na
 \fB[\fB-p\fR] \fB-u\fR \fBs\fR \fIvolume_set\fR\fR
 .ad
@@ -386,7 +373,6 @@ prior point-in-time data.
 
 .sp
 .ne 2
-.mk
 .na
 \fB[\fB-p\fR] [\fB-n\fR] \fB-u\fR \fBm\fR \fIvolume_set\fR\fR
 .ad
@@ -419,7 +405,6 @@ prior point-in-time data.
 
 .sp
 .ne 2
-.mk
 .na
 \fB[\fB-p\fR] \fB-c\fR s \fIvolume_set\fR\fR
 .ad
@@ -453,7 +438,6 @@ prior point-in-time data.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fBm\fR \fIvolume_set\fR\fR
 .ad
@@ -491,7 +475,6 @@ prior point-in-time data.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIvolume_set\fR\fR
 .ad
@@ -507,7 +490,6 @@ or copy command option to resynchronize the volumes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB[\fR\fB-p\fR\fB] [\fR\fB-n\fR\fB] \fR\fB-w\fR \fIvolume_set\fR\fR
 .ad
@@ -531,7 +513,6 @@ this option unlocks the data.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIvolume_set\fR\fR
 .ad
@@ -545,7 +526,6 @@ displayed for all Point-in-Time Copy volume sets that are configured.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
@@ -556,7 +536,6 @@ List all currently configured Point-in-Time Copy volumes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-O\fR \fIoverflow_vol\fR\fR
 .ad
@@ -583,7 +562,6 @@ especially when using the \fB-n\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR \fIoverflow_vol\fR \fIvolume_set\fR\fR
 .ad
@@ -614,7 +592,6 @@ especially when using the \fB-n\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR \fIvolume_set\fR\fR
 .ad
@@ -628,7 +605,6 @@ described below on the \fIvolume_set\fR. These operations momentarily clear out
 all overflow writes that are associated with this volume set.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBabort\fR(\fB-a\fR)\fR
 .ad
@@ -639,7 +615,6 @@ Abort copy operation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisable\fR(\fB-d\fR)\fR
 .ad
@@ -650,7 +625,6 @@ Dissolve the volume set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBupdate\fR(\fB-u\fR)\fR
 .ad
@@ -663,7 +637,6 @@ Update the volume set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR\fR
 .ad
@@ -675,7 +648,6 @@ volume sets.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Q\fR \fIoverflow_vol\fR\fR
 .ad
@@ -686,7 +658,6 @@ This option displays the current status of the \fIoverflow_vol\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-E\fR \fIvolume_set\fR\fR
 .ad
@@ -705,7 +676,6 @@ export command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR \fIvolume_set\fR \fIbitmap_vol\fR\fR
 .ad
@@ -735,7 +705,6 @@ operation. For example,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-J\fR \fIvolume_set\fR \fIbitmap_vol\fR\fR
 .ad
@@ -753,7 +722,6 @@ once again imported.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR \fIgroup_name\fR \fB-m\fR \fIvolume_set [volume_set2 ...]\fR\fR
 .ad
@@ -781,7 +749,6 @@ iiadm -g \fIgroup_name\fR [\fIoptions\fR]
 The \fIoptions\fR are as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -792,7 +759,6 @@ Abort copy operation on all sets within \fIgroup_name\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR\fR
 .ad
@@ -803,7 +769,6 @@ Attach \fIoverflow_vol\fR to all sets within \fIgroup_name\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fB{s | m}\fR\fR
 .ad
@@ -814,7 +779,6 @@ Copy shadow/master for all sets within \fIgroup_name\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
@@ -825,7 +789,6 @@ Detach \fIoverflow_vol\fR from all sets within \fIgroup_name\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -836,7 +799,6 @@ Disable all sets within \fIgroup_name\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-E\fR\fR
 .ad
@@ -847,7 +809,6 @@ Export all volume sets within \fIgroup_name\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
@@ -858,7 +819,6 @@ Status of all volume sets within \fIgroup_name\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
@@ -869,7 +829,6 @@ List all volume sets within \fIgroup_name\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR\fR
 .ad
@@ -880,7 +839,6 @@ List all groups.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -891,7 +849,6 @@ Do not ask if an update of the master volume is what the user really intended.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR\fR
 .ad
@@ -902,7 +859,6 @@ Set parameters on all volume sets within \fIgroup_name\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR\fR
 .ad
@@ -913,7 +869,6 @@ Reset all volume sets within \fIgroup_name\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fB{s | m}\fR\fR
 .ad
@@ -924,7 +879,6 @@ Update shadow/master for all sets within \fIgroup_name\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR\fR
 .ad
@@ -937,7 +891,6 @@ Wait for all volume sets within \fIgroup_name\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR \fB-" "\fR \fB-m\fR \fIvolume_set\fR [\fIvolume_set2 ...\fR]\fR
 .ad
@@ -953,7 +906,6 @@ documented \fBiiadm\fR group commands to be performed against the blank (\fB"
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR \fIcluster_tag\fR\fR
 .ad
@@ -981,7 +933,6 @@ package has not been installed or configured.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -992,7 +943,6 @@ Prints the \fBiiadm\fR usage summary.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -1007,7 +957,6 @@ Contact Sun Enterprise Services for assistance in using the remaining commands
 in this section.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIdelay\fR \fIunit\fR \fIvolume_set\fR\fR
 .ad
@@ -1020,7 +969,6 @@ from 2 to 10000 inclusive; unit ranges from 100 to 60000 inclusive.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIvolume\fR\fR
 .ad
@@ -1036,23 +984,19 @@ point-in-time volume updates.
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 13n
-.rt  
 Command completed successfully.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 13n
-.rt  
 An error occurred.
 .RE
 
@@ -1064,13 +1008,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/iicpbmp.1m b/usr/src/man/man1m/iicpbmp.1m
index 9f1ba1a1e2..bd867af67c 100644
--- a/usr/src/man/man1m/iicpbmp.1m
+++ b/usr/src/man/man1m/iicpbmp.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH iicpbmp 1M "2 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH IICPBMP 1M "Oct 2, 2007"
 .SH NAME
 iicpbmp \- copy Availability Suite Point-In-Time bitmap volumes
 .SH SYNOPSIS
@@ -27,12 +27,10 @@ set using the old bitmap is suspended.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 13n
-.rt  
 Do not attempt to update the Availability Suite configuration for the
 Point-in-Time shadow set that uses the bitmap. This option produces a duplicate
 of the bitmap but does not affect the shadow set using the old bitmap volume.
@@ -41,7 +39,6 @@ of the bitmap but does not affect the shadow set using the old bitmap volume.
 .SH OPERANDS
 .sp
 .ne 2
-.mk
 .na
 \fB\fIold_bitmap\fR \fInew_bitmap\fR\fR
 .ad
@@ -66,13 +63,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/iicpshd.1m b/usr/src/man/man1m/iicpshd.1m
index dc560f7f3d..ebf853db1d 100644
--- a/usr/src/man/man1m/iicpshd.1m
+++ b/usr/src/man/man1m/iicpshd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH iicpshd 1M "2 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH IICPSHD 1M "Oct 2, 2007"
 .SH NAME
 iicpshd \- copy Availability Suite Point-in-Time shadow volume
 .SH SYNOPSIS
@@ -29,12 +29,10 @@ using the old shadow volume is suspended.
 The \fBiicpshd\fR command supports the following option:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 13n
-.rt  
 Update the StorageTek configuration information for the Point-in-Time shadow
 set, but do \fBnot\fR copy data from the old shadow volume to the new shadow
 volume.
@@ -46,7 +44,6 @@ volume.
 A \fBiicpshd\fR command line has the following operands:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIold_shadow\fR \fInew_shadow\fR\fR
 .ad
@@ -65,13 +62,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ikeadm.1m b/usr/src/man/man1m/ikeadm.1m
index c681c43915..40a4cfd42a 100644
--- a/usr/src/man/man1m/ikeadm.1m
+++ b/usr/src/man/man1m/ikeadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ikeadm 1M "27 Jan 2009" "SunOS 5.11" "System Administration Commands"
+.TH IKEADM 1M "Jan 27, 2009"
 .SH NAME
 ikeadm \- manipulate Internet Key Exchange (IKE) parameters and state
 .SH SYNOPSIS
@@ -86,7 +86,6 @@ For details on how to use this command securely see .
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -99,7 +98,6 @@ otherwise unreachable.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
@@ -117,7 +115,6 @@ this flag is turned on.
 The following commands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadd\fR\fR
 .ad
@@ -132,7 +129,6 @@ appropriate id-value pairs as described in the \fBID FORMATS\fR section.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdel\fR\fR
 .ad
@@ -146,7 +142,6 @@ and preshared keys. The object to be deleted is specified as described in the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdump\fR\fR
 .ad
@@ -160,7 +155,6 @@ command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBflush\fR\fR
 .ad
@@ -175,7 +169,6 @@ with any new certificates added or removed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBget\fR\fR
 .ad
@@ -190,7 +183,6 @@ the appropriate specification for each object type is described below.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhelp\fR\fR
 .ad
@@ -202,7 +194,6 @@ information about that command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBread\fR\fR
 .ad
@@ -214,7 +205,6 @@ preshared keys from either the default location or from the file specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBset\fR\fR
 .ad
@@ -230,7 +220,6 @@ ikeadm.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwrite\fR\fR
 .ad
@@ -243,7 +232,6 @@ be used to overwrite the existing configuration files.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtoken\fR\fR
 .ad
@@ -270,7 +258,6 @@ and invalidate access to keying material.
 .SS "Object Types"
 .sp
 .ne 2
-.mk
 .na
 \fBdebug\fR
 .ad
@@ -283,23 +270,21 @@ a bitmask, with individual bits enabling different types of information.
 
 .sp
 .TS
-tab();
-cw(1.83i) cw(1.83i) cw(1.83i) 
-lw(1.83i) lw(1.83i) lw(1.83i) 
-.
-DescriptionFlagNickname
+c c c
+l l l .
+Description	Flag	Nickname
 _
-Certificate management0x0001cert
-Key management0x0002key
-Operational0x0004op
-Phase 1 SA creation0x0008phase1
-Phase 2 SA creation0x0010phase2
-PF_KEY interface0x0020pfkey
-Policy management0x0040policy
-Proposal construction0x0080prop
-Door interface0x0100door
-Config file processing0x0200config
-All debug flags0x3ffall
+Certificate management	0x0001	cert
+Key management	0x0002	key
+Operational	0x0004	op
+Phase 1 SA creation	0x0008	phase1
+Phase 2 SA creation	0x0010	phase2
+PF_KEY interface	0x0020	pfkey
+Policy management	0x0040	policy
+Proposal construction	0x0080	prop
+Door interface	0x0100	door
+Config file processing	0x0200	config
+All debug flags	0x3ff	all
 .TE
 
 When specifying the debug level, either a number (decimal or hexadecimal) or a
@@ -314,7 +299,6 @@ types of information; \fBall-op\fR has the effect of turning on all debug
 
 .sp
 .ne 2
-.mk
 .na
 \fBpriv\fR
 .ad
@@ -348,7 +332,6 @@ keying material. This is also the case when viewing Phase 1 \fBSA\fRs.
 
 .sp
 .ne 2
-.mk
 .na
 \fBstats\fR
 .ad
@@ -427,7 +410,6 @@ that is loaded. See .
 
 .sp
 .ne 2
-.mk
 .na
 \fBdefaults\fR
 .ad
@@ -446,7 +428,6 @@ display the default values, not the values used to override the defaults.
 
 .sp
 .ne 2
-.mk
 .na
 \fBp1\fR
 .ad
@@ -458,7 +439,6 @@ address pair or a cookie pair; identification formats are described below.
 
 .sp
 .ne 2
-.mk
 .na
 \fBrule\fR
 .ad
@@ -471,7 +451,6 @@ identified by its label; identification formats are described below.
 
 .sp
 .ne 2
-.mk
 .na
 \fBpreshared\fR
 .ad
@@ -504,7 +483,6 @@ Identity pairs are made up of a local type-value pair, followed by the remote
 type-value pair. Valid types are:
 .sp
 .ne 2
-.mk
 .na
 \fBprefix\fR
 .ad
@@ -515,7 +493,6 @@ An address prefix.
 
 .sp
 .ne 2
-.mk
 .na
 \fBfqdn\fR
 .ad
@@ -526,7 +503,6 @@ A fully-qualified domain name.
 
 .sp
 .ne 2
-.mk
 .na
 \fBdomain\fR
 .ad
@@ -537,7 +513,6 @@ Domain name, synonym for fqdn.
 
 .sp
 .ne 2
-.mk
 .na
 \fBuser_fqdn\fR
 .ad
@@ -548,7 +523,6 @@ User identity of the form \fIuser\fR@fqdn.
 
 .sp
 .ne 2
-.mk
 .na
 \fBmailbox\fR
 .ad
@@ -780,7 +754,7 @@ Attempted:initiator:    21   responder:      27
 Failed:   initiator:     0   responder:       0
 	         initiator fails include 0 time-out(s)
 PKCS#11 library linked in from /opt/SUNWconn/lib/libpkcs11.so
-example# 
+example#
 .fi
 .in -2
 .sp
@@ -823,23 +797,19 @@ ikeadm: PKCS#11 operation successful
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnon-zero\fR\fR
 .ad
 .RS 12n
-.rt  
 An error occurred. Writes an appropriate error message to standard error.
 .RE
 
@@ -851,13 +821,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityNot an Interface
+Interface Stability	Not an Interface
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ikecert.1m b/usr/src/man/man1m/ikecert.1m
index b971ab0098..bba87a4b7a 100644
--- a/usr/src/man/man1m/ikecert.1m
+++ b/usr/src/man/man1m/ikecert.1m
@@ -3,29 +3,29 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ikecert 1M "10 Jun 2009" "SunOS 5.11" "System Administration Commands"
+.TH IKECERT 1M "Jun 10, 2009"
 .SH NAME
 ikecert \- manipulates the machine's on-filesystem public-key certificate
 databases
 .SH SYNOPSIS
 .LP
 .nf
-\fBikecert\fR certlocal 
-     [\fB-a\fR | \fB-e\fR | \fB-h\fR | \fB-k\fR | \fB-l\fR | \fB-r\fR | \fB-U\fR | \fB-C\fR | \fB-L\fR] 
-     [[\fB-p\fR] \fB-T\fR \fIPKCS#11 token identifier\fR] 
+\fBikecert\fR certlocal
+     [\fB-a\fR | \fB-e\fR | \fB-h\fR | \fB-k\fR | \fB-l\fR | \fB-r\fR | \fB-U\fR | \fB-C\fR | \fB-L\fR]
+     [[\fB-p\fR] \fB-T\fR \fIPKCS#11 token identifier\fR]
      [\fIoption_specific_arguments\fR]...
 .fi
 
 .LP
 .nf
-\fBikecert\fR certdb [\fB-a\fR | \fB-e\fR | \fB-h\fR | \fB-l\fR | \fB-r\fR | \fB-U\fR | \fB-C\fR | \fB-L\fR] 
-     [[\fB-p\fR] \fB-T\fR \fIPKCS#11 token identifier\fR] 
+\fBikecert\fR certdb [\fB-a\fR | \fB-e\fR | \fB-h\fR | \fB-l\fR | \fB-r\fR | \fB-U\fR | \fB-C\fR | \fB-L\fR]
+     [[\fB-p\fR] \fB-T\fR \fIPKCS#11 token identifier\fR]
      [\fIoption_specific_arguments\fR]...
 .fi
 
 .LP
 .nf
-\fBikecert\fR certrldb [\fB-a\fR | \fB-e\fR | \fB-h\fR | \fB-l\fR | \fB-r\fR] 
+\fBikecert\fR certrldb [\fB-a\fR | \fB-e\fR | \fB-h\fR | \fB-l\fR | \fB-r\fR]
      [\fIoption_specific_arguments\fR]...
 .fi
 
@@ -86,7 +86,6 @@ specified in \fB/etc/inet/ike/config\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -94,7 +93,6 @@ The following options are supported:
 .RS 4n
 .sp
 .ne 2
-.mk
 .na
 \fBcertlocal\fR
 .ad
@@ -116,7 +114,6 @@ be imported first using the \fBcertdb\fR subcommand.
 
 .sp
 .ne 2
-.mk
 .na
 \fBcertdb\fR
 .ad
@@ -135,7 +132,6 @@ token is explicitly specified using the \fB-T\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fBcertrldb\fR
 .ad
@@ -150,7 +146,6 @@ input.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR [\fB-f\fR pkcs8] \fIslot\fR\fR
 .ad
@@ -158,7 +153,6 @@ input.
 .RS 4n
 .sp
 .ne 2
-.mk
 .na
 \fBcertlocal\fR
 .ad
@@ -181,7 +175,6 @@ extracted in unencrypted PKCS#8 format.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR [\fB-f\fR \fIoutput-format\fR] \fBcertspec\fR\fR
 .ad
@@ -189,7 +182,6 @@ extracted in unencrypted PKCS#8 format.
 .RS 4n
 .sp
 .ne 2
-.mk
 .na
 \fBcertdb\fR
 .ad
@@ -204,7 +196,6 @@ first matching identity. The default output format is \fBPEM\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBcertrldb\fR
 .ad
@@ -221,7 +212,6 @@ matches in the database is extracted. See \fBNOTES\fR, below, for details on
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-kc\fR \fB-m\fR \fIkeysize\fR \fB-t\fR \fIkeytype\fR \fB-D\fR \fIdname\fR
 \fB-A\fR \fIaltname\fR[ ... ]\fR
@@ -238,7 +228,6 @@ matches in the database is extracted. See \fBNOTES\fR, below, for details on
 .RS 4n
 .sp
 .ne 2
-.mk
 .na
 \fBcertlocal\fR
 .ad
@@ -261,7 +250,6 @@ unlock the token with \fBikeadm\fR(1M) once \fBin.iked\fR(1M) is running.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-ks\fR \fB-m\fR \fIkeysize\fR \fB-t\fR \fIkeytype\fR \fB-D\fR \fIdname\fR
 \fB-A\fR \fIaltname\fR[ ... ]\fR
@@ -283,7 +271,6 @@ identifier\fR]\fR
 .RS 4n
 .sp
 .ne 2
-.mk
 .na
 \fBcertlocal\fR
 .ad
@@ -303,7 +290,6 @@ and the self-signed certificate will also be stored in the hardware.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR [\fB-v\fR] [\fIslot\fR]\fR
 .ad
@@ -311,7 +297,6 @@ and the self-signed certificate will also be stored in the hardware.
 .RS 4n
 .sp
 .ne 2
-.mk
 .na
 \fBcertlocal\fR
 .ad
@@ -330,7 +315,6 @@ objects.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR [\fB-v\fR] [certspec]\fR
 .ad
@@ -338,7 +322,6 @@ objects.
 .RS 4n
 .sp
 .ne 2
-.mk
 .na
 \fBcertdb\fR
 .ad
@@ -356,7 +339,6 @@ listed.
 
 .sp
 .ne 2
-.mk
 .na
 \fBcertrldb\fR
 .ad
@@ -374,7 +356,6 @@ patterns.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIslot\fR\fR
 .ad
@@ -382,7 +363,6 @@ patterns.
 .RS 4n
 .sp
 .ne 2
-.mk
 .na
 \fBcertlocal\fR
 .ad
@@ -402,7 +382,6 @@ already deleted by \fBcertdb\fR \fB-r\fR, that is not a problem.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR certspec\fR
 .ad
@@ -410,7 +389,6 @@ already deleted by \fBcertdb\fR \fB-r\fR, that is not a problem.
 .RS 4n
 .sp
 .ne 2
-.mk
 .na
 \fBcertdb\fR
 .ad
@@ -431,7 +409,6 @@ already deleted by \fBcertlocal\fR \fB-r\fR, that is not a problem.
 
 .sp
 .ne 2
-.mk
 .na
 \fBcertrldb\fR
 .ad
@@ -445,7 +422,6 @@ with the given \fBcertspec\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-U\fR slot\fR
 .ad
@@ -453,7 +429,6 @@ with the given \fBcertspec\fR.
 .RS 4n
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcertlocal\fR\fR
 .ad
@@ -468,7 +443,6 @@ database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcertdb\fR\fR
 .ad
@@ -485,7 +459,6 @@ disassociated from the IKE database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR certspec\fR
 .ad
@@ -493,7 +466,6 @@ disassociated from the IKE database.
 .RS 4n
 .sp
 .ne 2
-.mk
 .na
 \fBcertlocal\fR
 .ad
@@ -511,7 +483,6 @@ this manner.
 
 .sp
 .ne 2
-.mk
 .na
 \fBcertdb\fR
 .ad
@@ -532,7 +503,6 @@ token with \fBikeadm\fR(1M) once \fBin.iked\fR(1M) is running.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR pattern\fR
 .ad
@@ -540,7 +510,6 @@ token with \fBikeadm\fR(1M) once \fBin.iked\fR(1M) is running.
 .RS 4n
 .sp
 .ne 2
-.mk
 .na
 \fBcertlocal\fR
 .ad
@@ -555,7 +524,6 @@ created on-token with the Solaris \fBIKE\fR utilities.
 
 .sp
 .ne 2
-.mk
 .na
 \fBcertdb\fR
 .ad
@@ -580,7 +548,6 @@ token with \fBikeadm\fR(1M) once \fBin.iked\fR(1M) is running.
 The following parameters are supported:
 .sp
 .ne 2
-.mk
 .na
 \fBcertspec\fR
 .ad
@@ -605,7 +572,7 @@ ISSUER=<Issuer Names>
 SLOT=<Slot Number in the certificate database>
 
 Example:"ISSUER=C=US, O=SUN" IP=1.2.3.4 !DNS=example.com
-Example:"C=US,   O=CALIFORNIA" IP=5.4.2.1 DNS=example.com 
+Example:"C=US,   O=CALIFORNIA" IP=5.4.2.1 DNS=example.com
 .fi
 .in -2
 .sp
@@ -630,7 +597,6 @@ can also be issued with keyword tags.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR\fR
 .ad
@@ -644,7 +610,6 @@ example below).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
@@ -658,7 +623,6 @@ unit, \fBCN\fR=common name. Valid tags are: \fBC\fR, \fBO\fR, \fBOU\fR, and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -670,7 +634,6 @@ Encoding output format. \fBpem\fR for \fBPEM Base64\fR or \fBber\fR for
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fIvalidity end_time\fR\fR
 .ad
@@ -683,7 +646,6 @@ validity end time is calculated at four years from the validity start time. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
@@ -726,7 +688,6 @@ below), supports only up to 2048-bit keys for RSA and 1024-bit keys for DSA.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR \fIvalidity start_time\fR\fR
 .ad
@@ -739,7 +700,6 @@ below, for an explanation for the validity date and time syntax.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
@@ -750,7 +710,6 @@ Key type. It can be \fBrsa-sha1\fR, \fBrsa-md5\fR, or \fBdsa-sha1\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR\fR
 .ad
@@ -859,7 +818,6 @@ example# \fB# ikecert certlocal -kc -m 1024 -t rsa-md5 -T vca0-keystore \e
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -870,7 +828,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnon-zero\fR\fR
 .ad
@@ -882,7 +839,6 @@ An error occurred. Writes an appropriate error message to standard error.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/secret/ike.privatekeys/*\fR\fR
 .ad
@@ -894,7 +850,6 @@ with the same filename in \fB/etc/inet/ike/publickeys/\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/ike/publickeys/*\fR\fR
 .ad
@@ -906,7 +861,6 @@ private key names.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/ike/crls/*\fR\fR
 .ad
@@ -917,7 +871,6 @@ Public key certificate revocation lists.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/ike/config\fR\fR
 .ad
@@ -934,13 +887,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
@@ -977,7 +929,6 @@ For relative dates, the syntax is as follows:
 where:
 .sp
 .ne 2
-.mk
 .na
 \fBN\fR
 .ad
@@ -988,7 +939,6 @@ represents an integer
 
 .sp
 .ne 2
-.mk
 .na
 \fBs\fR
 .ad
@@ -999,7 +949,6 @@ represents seconds
 
 .sp
 .ne 2
-.mk
 .na
 \fBm\fR
 .ad
@@ -1010,7 +959,6 @@ represents minutes
 
 .sp
 .ne 2
-.mk
 .na
 \fBh\fR
 .ad
@@ -1021,7 +969,6 @@ represents hours
 
 .sp
 .ne 2
-.mk
 .na
 \fBd\fR
 .ad
@@ -1032,7 +979,6 @@ represents days
 
 .sp
 .ne 2
-.mk
 .na
 \fBw\fR
 .ad
@@ -1043,7 +989,6 @@ represents weeks
 
 .sp
 .ne 2
-.mk
 .na
 \fBM\fR
 .ad
@@ -1054,7 +999,6 @@ represents months
 
 .sp
 .ne 2
-.mk
 .na
 \fBy\fR
 .ad
@@ -1090,7 +1034,7 @@ day and 2 hours ago and an end date of Jan 22nd, 2007 at 12:00:00 local time.
 .in +2
 .nf
 # ikecert certlocal -ks -t rsa-sha1 -m 1024 \e
-    -D "CN=mycert, O=Sun, C=US" \e 
+    -D "CN=mycert, O=Sun, C=US" \e
     -S -1d2h -F "01/22/2007 12:00:00"
 .fi
 .in -2
diff --git a/usr/src/man/man1m/in.chargend.1m b/usr/src/man/man1m/in.chargend.1m
index 19bb8b6991..e9673be03c 100644
--- a/usr/src/man/man1m/in.chargend.1m
+++ b/usr/src/man/man1m/in.chargend.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.chargend 1M "23 Aug 2004" "SunOS 5.11" "System Administration Commands"
+.TH IN.CHARGEND 1M "Aug 23, 2004"
 .SH NAME
 in.chargend \- UDP or TCP character generator service daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fBin.chargend\fR 
+\fBin.chargend\fR
 .fi
 
 .LP
@@ -34,12 +34,10 @@ The \fBin.chargend\fR detects which transport is requested by examining the
 socket it is passed by the \fBinetd\fR daemon.
 .sp
 .ne 2
-.mk
 .na
 \fBTCP-based service\fR
 .ad
 .RS 21n
-.rt  
 Once a connection is established, the \fBin.chargend\fR generates a stream of
 data. Any data received is discarded. The server generates data until the
 client program terminates the connection. Note that the data flow is limited by
@@ -48,12 +46,10 @@ TCP flow control mechanisms.
 
 .sp
 .ne 2
-.mk
 .na
 \fBUDP-based service\fR
 .ad
 .RS 21n
-.rt  
 The \fBin.chargend\fR listens for UDP datagrams. When a datagram is received,
 the server generates a UDP datagram in response containing a random number of
 ASCII characters (ranging from 0 to 512 characters). Any received data is
@@ -73,13 +69,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/in.comsat.1m b/usr/src/man/man1m/in.comsat.1m
index 8e775c60f7..76e4091dbd 100644
--- a/usr/src/man/man1m/in.comsat.1m
+++ b/usr/src/man/man1m/in.comsat.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.comsat 1M "27 Jul 2004" "SunOS 5.11" "System Administration Commands"
+.TH IN.COMSAT 1M "Jul 27, 2004"
 .SH NAME
 in.comsat, comsat \- biff server
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/in.comsat\fR 
+\fB/usr/sbin/in.comsat\fR
 .fi
 
 .SH DESCRIPTION
@@ -38,12 +38,10 @@ displaying the message.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/utmpx\fR\fR
 .ad
 .RS 18n
-.rt  
 user access and administration information
 .RE
 
diff --git a/usr/src/man/man1m/in.daytimed.1m b/usr/src/man/man1m/in.daytimed.1m
index b991e3244a..c986ea9d4e 100644
--- a/usr/src/man/man1m/in.daytimed.1m
+++ b/usr/src/man/man1m/in.daytimed.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.daytimed 1M "23 Aug 2004" "SunOS 5.11" "System Administration Commands"
+.TH IN.DAYTIMED 1M "Aug 23, 2004"
 .SH NAME
 in.daytimed \- UDP or TCP daytime protocol service daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fBin.daytimed\fR 
+\fBin.daytimed\fR
 .fi
 
 .LP
@@ -34,12 +34,10 @@ service. The \fBin.daytimed\fR detects which transport is requested by
 examining the socket it is passed by the \fBinetd\fR daemon.
 .sp
 .ne 2
-.mk
 .na
 \fBTCP-based service\fR
 .ad
 .RS 21n
-.rt  
 Once a connection is established, the \fBin.daytimed\fR generates the current
 date and time in \fBctime\fR(3C) format as 7-bit ASCII and sends it through the
 connection. The server then closes the connection. Any data received from the
@@ -48,12 +46,10 @@ client side of the connection is discarded.
 
 .sp
 .ne 2
-.mk
 .na
 \fBUDP-based service\fR
 .ad
 .RS 21n
-.rt  
 The \fBin.daytimed\fR listens for UDP datagrams. When a datagram is received,
 the server generates the current date and time in \fBctime\fR(3C) format as
 7-bit ASCII and inserts it in a UDP datagram sent in response to the client's
@@ -68,13 +64,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/in.dhcpd.1m b/usr/src/man/man1m/in.dhcpd.1m
index a35694896e..09152473f2 100644
--- a/usr/src/man/man1m/in.dhcpd.1m
+++ b/usr/src/man/man1m/in.dhcpd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.dhcpd 1M "10 Aug 2004" "SunOS 5.11" "System Administration Commands"
+.TH IN.DHCPD 1M "Aug 10, 2004"
 .SH NAME
 in.dhcpd \- Dynamic Host Configuration Protocol server
 .SH SYNOPSIS
@@ -91,7 +91,6 @@ contains all the server default settings, and can be modified by using the
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR \fB automatic | manual\fR\fR
 .ad
@@ -108,7 +107,6 @@ manual\fR). This option only affects \fBDHCP\fR server mode.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -122,7 +120,6 @@ DHCP/BOOTP server mode and \fBBOOTP\fR relay agent mode.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fI relay_hops\fR\fR
 .ad
@@ -136,7 +133,6 @@ mode.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fI interface, .\|.\|.\fR\fR
 .ad
@@ -153,7 +149,6 @@ DHCP/BOOTP server and \fBBOOTP\fR relay agent run modes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIsyslog_local_facility\fR\fR
 .ad
@@ -177,7 +172,7 @@ Protocol:
 .nf
   Relay mode:     "BOOTP"
   Server mode:    "BOOTP" or "DHCP" based upon client
-                       type. 
+                       type.
 .fi
 .in -2
 .sp
@@ -190,9 +185,9 @@ Type:
 .sp
 .in +2
 .nf
-Relay mode:     "RELAY-CLNT", "RELAY-SRVR" 
-Server mode:    "ASSIGN", "EXTEND", "RELEASE", 
-                    "DECLINE", "INFORM", "NAK" "ICMP-ECHO." 
+Relay mode:     "RELAY-CLNT", "RELAY-SRVR"
+Server mode:    "ASSIGN", "EXTEND", "RELEASE",
+                    "DECLINE", "INFORM", "NAK" "ICMP-ECHO."
 .fi
 .in -2
 .sp
@@ -210,7 +205,7 @@ Lease time:
 .sp
 .in +2
 .nf
-Relay mode:     Always 0. 
+Relay mode:     Always 0.
 Server mode:    0 for ICMP-ECHO events, absolute time in
                     seconds (unix time)  otherwise
 .fi
@@ -224,7 +219,7 @@ Server mode:    0 for ICMP-ECHO events, absolute time in
 Source IP address: Dotted Internet form
 .LP
 .nf
-Relay mode:     Relay interface IP on RELAY-CLNT,  INADDR_ANY on RELAY-SRVR. Server mode:    Client IP. 
+Relay mode:     Relay interface IP on RELAY-CLNT,  INADDR_ANY on RELAY-SRVR. Server mode:    Client IP.
 .fi
 
 .RE
@@ -244,7 +239,7 @@ Relay mode:     Client IP on RELAY-CLNT, Server IP on RELAY-SRVR. Server mode:
 Client Identifier: Hex representation (0-9, A-F)
 .LP
 .nf
-Relay mode:     MAC address                          Server mode:    BOOTP - MAC address; DHCP - client id 
+Relay mode:     MAC address                          Server mode:    BOOTP - MAC address; DHCP - client id
 .fi
 
 .RE
@@ -255,7 +250,7 @@ Vendor Class identifier (white space converted to
 periods (.)).
 .LP
 .nf
-Relay mode:     Always "N/A" Server mode:    Vendor class ID tokenized by  converting white space characters  to periods (.) 
+Relay mode:     Always "N/A" Server mode:    Vendor class ID tokenized by  converting white space characters  to periods (.)
 .fi
 
 .RE
@@ -284,7 +279,6 @@ by \fBlogadm\fR(1M).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -299,7 +293,6 @@ client, to verify that the address is not in use by another machine.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fI DHCP_offer_time\fR\fR
 .ad
@@ -314,7 +307,6 @@ server mode.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fI IP_address | hostname, .\|.\|.\fR\fR
 .ad
@@ -341,7 +333,6 @@ identify the subnet mask of the foreign BOOTP/DHCP client's network. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fI dhcptab_rescan_interval\fR\fR
 .ad
@@ -356,7 +347,6 @@ off this option to avoid needless reinitialization of the server.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -411,7 +401,6 @@ packets whose hop count exceeds 5:
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/dhcpsvc.conf\fR\fR
 .ad
@@ -422,24 +411,22 @@ packets whose hop count exceeds 5:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/init/hosts\fR\fR
 .ad
 .sp .6
 .RS 4n
- 
+
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/inet/dhcp/nsu/rfc2136.so.1\fR\fR
 .ad
 .sp .6
 .RS 4n
- 
+
 .RE
 
 .SH ATTRIBUTES
@@ -450,13 +437,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/in.discardd.1m b/usr/src/man/man1m/in.discardd.1m
index 6fff027d25..7da93a01a6 100644
--- a/usr/src/man/man1m/in.discardd.1m
+++ b/usr/src/man/man1m/in.discardd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.discardd 1M "23 Aug 2004" "SunOS 5.11" "System Administration Commands"
+.TH IN.DISCARDD 1M "Aug 23, 2004"
 .SH NAME
 in.discardd \- UDP or TCP discard protocol service
 .SH SYNOPSIS
 .LP
 .nf
-\fBin.discardd\fR 
+\fBin.discardd\fR
 .fi
 
 .LP
@@ -37,12 +37,10 @@ examining the socket it is passed by the \fBinetd\fR daemon.
 The discard service simply throws away any data it receives from the client.
 .sp
 .ne 2
-.mk
 .na
 \fBTCP-based service\fR
 .ad
 .RS 21n
-.rt  
 Once a connection is established, the \fBin.discardd\fR discards any data
 received. No response is generated. The connection remains open until the
 client terminates it.
@@ -50,12 +48,10 @@ client terminates it.
 
 .sp
 .ne 2
-.mk
 .na
 \fBUDP-based service\fR
 .ad
 .RS 21n
-.rt  
 The \fBin.discardd\fR listens for UDP datagrams. When a datagram is received,
 the server discards it. No response is sent.
 .RE
@@ -68,13 +64,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/in.echod.1m b/usr/src/man/man1m/in.echod.1m
index 8a8ef20f1b..4229828c2d 100644
--- a/usr/src/man/man1m/in.echod.1m
+++ b/usr/src/man/man1m/in.echod.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.echod 1M "23 Aug 2004" "SunOS 5.11" "System Administration Commands"
+.TH IN.ECHOD 1M "Aug 23, 2004"
 .SH NAME
 in.echod \- UDP or TCP echo protocol service daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fBin.echod\fR 
+\fBin.echod\fR
 .fi
 
 .LP
@@ -34,12 +34,10 @@ service. The \fBin.echod\fR detects which transport is requested by examining
 the socket it is passed by the \fBinetd\fR daemon.
 .sp
 .ne 2
-.mk
 .na
 \fBTCP-based service\fR
 .ad
 .RS 21n
-.rt  
 Once a connection is established, the \fBin.echod\fR echoes any data received
 from the client back to the client. The server echoes data until the client
 program terminates the connection.
@@ -47,12 +45,10 @@ program terminates the connection.
 
 .sp
 .ne 2
-.mk
 .na
 \fBUDP-based service\fR
 .ad
 .RS 21n
-.rt  
 The \fBin.echod\fR listens for UDP datagrams. When a datagram is received, the
 server creates a UDP datagram containing the data it received and sends it to
 the client.
@@ -66,13 +62,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/in.fingerd.1m b/usr/src/man/man1m/in.fingerd.1m
index 52b63947d7..a8dfa6ceac 100644
--- a/usr/src/man/man1m/in.fingerd.1m
+++ b/usr/src/man/man1m/in.fingerd.1m
@@ -1,16 +1,16 @@
 '\" te
-.\"  Copyright 1989 AT&T 
+.\"  Copyright 1989 AT&T
 .\"  Copyright (c) 2004, Sun Microsystems, Inc.  All Rights Reserved
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.fingerd 1M "31 Jul 2004" "SunOS 5.11" "System Administration Commands"
+.TH IN.FINGERD 1M "Jul 31, 2004"
 .SH NAME
 in.fingerd, fingerd \- remote user information server
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/in.fingerd\fR 
+\fB/usr/sbin/in.fingerd\fR
 .fi
 
 .SH DESCRIPTION
@@ -31,56 +31,46 @@ connections as soon as the output is finished.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/utmpx\fR\fR
 .ad
 .RS 20n
-.rt  
 User and accounting information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/passwd\fR\fR
 .ad
 .RS 20n
-.rt  
 System password file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/lastlog\fR\fR
 .ad
 .RS 20n
-.rt  
 Last login times.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB$HOME/.plan \fR\fR
 .ad
 .RS 20n
-.rt  
 User's plans.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB$HOME/.project \fR\fR
 .ad
 .RS 20n
-.rt  
 User's projects.
 .RE
 
diff --git a/usr/src/man/man1m/in.ftpd.1m b/usr/src/man/man1m/in.ftpd.1m
index edb00efd1b..7fc44bbfd6 100644
--- a/usr/src/man/man1m/in.ftpd.1m
+++ b/usr/src/man/man1m/in.ftpd.1m
@@ -4,15 +4,15 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.ftpd 1M "10 Nov 2005" "SunOS 5.11" "System Administration Commands"
+.TH IN.FTPD 1M "Nov 10, 2005"
 .SH NAME
 in.ftpd, ftpd \- File Transfer Protocol Server
 .SH SYNOPSIS
 .LP
 .nf
-\fBin.ftpd\fR [\fB-4\fR] [\fB-A\fR] [\fB-a\fR] [\fB-C\fR] [\fB-d\fR] [\fB-I\fR] [\fB-i\fR] [\fB-K\fR] [\fB-L\fR] [\fB-l\fR] 
-     [\fB-o\fR] [\fB-P\fR \fIdataport\fR] [\fB-p\fR \fIctrlport\fR] [\fB-Q\fR] [\fB-q\fR] 
-     [\fB-r\fR \fIrootdir\fR] [\fB-S\fR] [\fB-s\fR] [\fB-T\fR \fImaxtimeout\fR] [\fB-t\fR \fItimeout\fR] 
+\fBin.ftpd\fR [\fB-4\fR] [\fB-A\fR] [\fB-a\fR] [\fB-C\fR] [\fB-d\fR] [\fB-I\fR] [\fB-i\fR] [\fB-K\fR] [\fB-L\fR] [\fB-l\fR]
+     [\fB-o\fR] [\fB-P\fR \fIdataport\fR] [\fB-p\fR \fIctrlport\fR] [\fB-Q\fR] [\fB-q\fR]
+     [\fB-r\fR \fIrootdir\fR] [\fB-S\fR] [\fB-s\fR] [\fB-T\fR \fImaxtimeout\fR] [\fB-t\fR \fItimeout\fR]
      [\fB-u\fR \fIumask\fR] [\fB-V\fR] [\fB-v\fR] [\fB-W\fR] [\fB-w\fR] [\fB-X\fR]
 .fi
 
@@ -29,47 +29,39 @@ connection to the FTP service is made or run as a standalone server. See
 \fBin.ftpd\fR supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-4\fR\fR
 .ad
 .RS 17n
-.rt  
 When running in standalone mode, listen for connections on an \fBAF_INET\fR
 type socket. The default is to listen on an \fBAF_INET6\fR type socket.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 17n
-.rt  
 Enables use of the \fBftpaccess\fR(4) file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR\fR
 .ad
 .RS 17n
-.rt  
 Disables use of the \fBftpaccess\fR(4) file. Use of \fBftpaccess\fR is disabled
 by default.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR\fR
 .ad
 .RS 17n
-.rt  
 Non-anonymous users need local credentials (for example, to authenticate to
 remote fileservers). So they should be prompted for a password unless they
 forwarded credentials as part of authentication.
@@ -77,23 +69,19 @@ forwarded credentials as part of authentication.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 17n
-.rt  
 Writes debugging information to \fBsyslogd\fR(1M).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 17n
-.rt  
 Logs the names of all files received by the \fBFTP\fR Server to
 \fBxferlog\fR(4). You can override the \fB-i\fR option through use of the
 \fBftpaccess\fR(4) file.
@@ -101,12 +89,10 @@ Logs the names of all files received by the \fBFTP\fR Server to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR\fR
 .ad
 .RS 17n
-.rt  
 Disables the use of \fBAUTH\fR and \fBident\fR to determine the username on the
 client. See \fIRFC 931\fR. The \fBFTP\fR Server is built not to use \fBAUTH\fR
 and \fBident\fR.
@@ -114,12 +100,10 @@ and \fBident\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-K\fR\fR
 .ad
 .RS 17n
-.rt  
 Connections are only allowed for users who can authenticate through the
 \fBftp\fR \fBAUTH\fR mechanism. (Anonymous \fBftp\fR may also be allowed if it
 is configured.) \fBftpd\fR will ask the user for a password if one is required.
@@ -127,23 +111,19 @@ is configured.) \fBftpd\fR will ask the user for a password if one is required.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 17n
-.rt  
 Logs each \fBFTP\fR session to \fBsyslogd\fR(1M).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR\fR
 .ad
 .RS 17n
-.rt  
 Logs all commands sent to \fBin.ftpd\fR to \fBsyslogd\fR(1M). When the \fB-L\fR
 option is used, command logging will be on by default, once the FTP Server is
 invoked. Because the \fBFTP\fR Server includes \fBUSER\fR commands in those
@@ -154,12 +134,10 @@ the \fBftpaccess\fR(4) file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 17n
-.rt  
 Logs the names of all files transmitted by the FTP Server to \fBxferlog\fR(4).
 You can override the \fB-o\fR option through use of the \fBftpaccess\fR(4)
 file.
@@ -167,12 +145,10 @@ file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIdataport\fR\fR
 .ad
 .RS 17n
-.rt  
 The FTP Server determines the port number by looking in the \fBservices\fR(4)
 file for an entry for the \fBftp-data\fR service. If there is no entry, the
 daemon uses the port just prior to the control connection port. Use the
@@ -181,12 +157,10 @@ daemon uses the port just prior to the control connection port. Use the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIctrlport\fR\fR
 .ad
 .RS 17n
-.rt  
 When run in standalone mode, the \fBFTP\fR Server determines the control port
 number by looking in the \fBservices\fR(4) file for an entry for the \fBftp\fR
 service. Use the \fB-p\fR option to specify the control port number.
@@ -194,12 +168,10 @@ service. Use the \fB-p\fR option to specify the control port number.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Q\fR\fR
 .ad
 .RS 17n
-.rt  
 Disables \fBPID\fR files. This disables user limits. Large, busy sites that do
 not want to impose limits on the number of concurrent users can use this option
 to disable \fBPID\fR files.
@@ -207,12 +179,10 @@ to disable \fBPID\fR files.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
 .RS 17n
-.rt  
 Uses \fBPID\fR files. The \fBlimit\fR directive uses \fBPID\fR files to
 determine the number of current users in each access class. By default,
 \fBPID\fR files are used.
@@ -220,12 +190,10 @@ determine the number of current users in each access class. By default,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrootdir\fR\fR
 .ad
 .RS 17n
-.rt  
 \fBchroot\fR(2) to \fIrootdir\fR upon loading. Use this option to improve
 system security. It limits the files that can be damaged should a break in
 occur through the daemon. This option is similar to anonymous \fBFTP\fR.
@@ -234,12 +202,10 @@ Additional files are needed, which vary from system to system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR\fR
 .ad
 .RS 17n
-.rt  
 Places the daemon in standalone operation mode. The daemon runs in the
 background. This is useful for startup scripts that run during system
 initialization. See \fBinit.d\fR(4).
@@ -247,24 +213,20 @@ initialization. See \fBinit.d\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 17n
-.rt  
 Places the daemon in standalone operation mode. The daemon runs in the
 foreground. This is useful when run from \fB/etc/inittab\fR by \fBinit\fR(1M).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fImaxtimeout\fR\fR
 .ad
 .RS 17n
-.rt  
 Sets the maximum allowable timeout period to \fImaxtimeout\fR seconds. The
 default maximum timeout limit is 7200 second (two hours). You can override the
 \fB-T\fR option through use of the \fBftpaccess\fR(4) file.
@@ -272,12 +234,10 @@ default maximum timeout limit is 7200 second (two hours). You can override the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fItimeout\fR\fR
 .ad
 .RS 17n
-.rt  
 Sets the inactivity timeout period to \fItimeout\fR seconds. The default
 timeout period is 900 seconds (15 minutes). You can override the \fB-t\fR
 option through use of the \fBftpaccess\fR(4) file.
@@ -285,68 +245,56 @@ option through use of the \fBftpaccess\fR(4) file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIumask\fR\fR
 .ad
 .RS 17n
-.rt  
 Sets the default \fBumask\fR to \fIumask\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
 .RS 17n
-.rt  
 Displays copyright and version information, then terminate.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 17n
-.rt  
 Writes debugging information to \fBsyslogd\fR(1M).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-W\fR\fR
 .ad
 .RS 17n
-.rt  
 Does not record user \fBlogin\fR and \fBlogout\fR in the \fBwtmpx\fR(4) file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR\fR
 .ad
 .RS 17n
-.rt  
 Records each user \fBlogin\fR and \fBlogout\fR in the \fBwtmpx\fR(4) file. By
 default, logins and logouts are recorded.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-X\fR\fR
 .ad
 .RS 17n
-.rt  
 Writes the output from the \fB-i\fR and \fB-o\fR options to the
 \fBsyslogd\fR(1M) file instead of \fBxferlog\fR(4). This allows the collection
 of output from several hosts on one central loghost. You can override the
@@ -360,321 +308,263 @@ The FTP Server currently supports the following \fBFTP\fR requests. Case is not
 distinguished.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBABOR\fR\fR
 .ad
 .RS 8n
-.rt  
 Abort previous command.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBADAT\fR\fR
 .ad
 .RS 8n
-.rt  
 Send an authentication protocol message.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBALLO\fR\fR
 .ad
 .RS 8n
-.rt  
 Allocate storage (vacuously).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBAUTH\fR\fR
 .ad
 .RS 8n
-.rt  
 Specify an authentication protocol to be performed. Currently only
 "\fBGSSAPI\fR" is supported.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBAPPE\fR\fR
 .ad
 .RS 8n
-.rt  
 Append to a file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCCC\fR\fR
 .ad
 .RS 8n
-.rt  
 Set the command channel protection mode to "\fBClear\fR" (no protection). Not
 allowed if data channel is protected.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCDUP\fR\fR
 .ad
 .RS 8n
-.rt  
 Change to parent of current working directory.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCWD\fR\fR
 .ad
 .RS 8n
-.rt  
 Change working directory.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDELE\fR\fR
 .ad
 .RS 8n
-.rt  
 Delete a file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBENC\fR\fR
 .ad
 .RS 8n
-.rt  
 Send a privacy and integrity protected command (given in argument).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEPRT\fR\fR
 .ad
 .RS 8n
-.rt  
 Specify extended address for the transport connection.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEPSV\fR\fR
 .ad
 .RS 8n
-.rt  
 Extended passive command request.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBHELP\fR\fR
 .ad
 .RS 8n
-.rt  
 Give help information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLIST\fR\fR
 .ad
 .RS 8n
-.rt  
 Give list files in a directory (\fBls\fR \fB-lA\fR).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLPRT\fR\fR
 .ad
 .RS 8n
-.rt  
 Specify long address for the transport connection.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLPSV\fR\fR
 .ad
 .RS 8n
-.rt  
 Long passive command request.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMIC\fR\fR
 .ad
 .RS 8n
-.rt  
 Send an integrity protected command (given in argument).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMKD\fR\fR
 .ad
 .RS 8n
-.rt  
 Make a directory.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMDTM\fR\fR
 .ad
 .RS 8n
-.rt  
 Show last time file modified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMODE\fR\fR
 .ad
 .RS 8n
-.rt  
 Specify data transfer \fImode\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNLST\fR\fR
 .ad
 .RS 8n
-.rt  
 Give name list of files in directory (\fBls\fR).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNOOP\fR\fR
 .ad
 .RS 8n
-.rt  
 Do nothing.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPASS\fR\fR
 .ad
 .RS 8n
-.rt  
 Specify password.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPASV\fR\fR
 .ad
 .RS 8n
-.rt  
 Prepare for server-to-server transfer.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPBSZ\fR\fR
 .ad
 .RS 8n
-.rt  
 Specify a protection buffer size.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPROT\fR\fR
 .ad
 .RS 8n
-.rt  
 Specify a protection level under which to protect data transfers. Allowed
 arguments:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBclear\fR\fR
 .ad
 .RS 11n
-.rt  
 No protection.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsafe\fR\fR
 .ad
 .RS 11n
-.rt  
 Integrity protection
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprivate\fR\fR
 .ad
 .RS 11n
-.rt  
 Integrity and encryption protection
 .RE
 
@@ -682,243 +572,199 @@ Integrity and encryption protection
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPORT\fR\fR
 .ad
 .RS 8n
-.rt  
 Specify data connection port.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPWD\fR\fR
 .ad
 .RS 8n
-.rt  
 Print the current working directory.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBQUIT\fR\fR
 .ad
 .RS 8n
-.rt  
 Terminate session.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBREST\fR\fR
 .ad
 .RS 8n
-.rt  
 Restart incomplete transfer.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRETR\fR\fR
 .ad
 .RS 8n
-.rt  
 Retrieve a file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRMD\fR\fR
 .ad
 .RS 8n
-.rt  
 Remove a directory.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRNFR\fR\fR
 .ad
 .RS 8n
-.rt  
 Specify rename-from file name.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRNTO\fR\fR
 .ad
 .RS 8n
-.rt  
 Specify rename-to file name.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSITE\fR\fR
 .ad
 .RS 8n
-.rt  
 Use nonstandard commands.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSIZE\fR\fR
 .ad
 .RS 8n
-.rt  
 Return size of file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSTAT\fR\fR
 .ad
 .RS 8n
-.rt  
 Return status of server.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSTOR\fR\fR
 .ad
 .RS 8n
-.rt  
 Store a file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSTOU\fR\fR
 .ad
 .RS 8n
-.rt  
 Store a file with a unique name.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSTRU\fR\fR
 .ad
 .RS 8n
-.rt  
 Specify data transfer \fIstructure\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSYST\fR\fR
 .ad
 .RS 8n
-.rt  
 Show operating system type of server system.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTYPE\fR\fR
 .ad
 .RS 8n
-.rt  
 Specify data transfer \fBtype\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBUSER\fR\fR
 .ad
 .RS 8n
-.rt  
 Specify user name.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBXCUP\fR\fR
 .ad
 .RS 8n
-.rt  
 Change to parent of current working directory. This request is deprecated.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBXCWD\fR\fR
 .ad
 .RS 8n
-.rt  
 Change working directory. This request is deprecated.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBXMKD\fR\fR
 .ad
 .RS 8n
-.rt  
 Make a directory. This request is deprecated.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBXPWD\fR\fR
 .ad
 .RS 8n
-.rt  
 Print the current working directory. This request is deprecated.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBXRMD\fR\fR
 .ad
 .RS 8n
-.rt  
 Remove a directory. This request is deprecated.
 .RE
 
@@ -928,133 +774,109 @@ The following nonstandard or UNIX specific commands are supported by the
 \fBSITE\fR request:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBALIAS\fR\fR
 .ad
 .RS 15n
-.rt  
 List aliases.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCDPATH\fR\fR
 .ad
 .RS 15n
-.rt  
 List the search path used when changing directories.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCHECKMETHOD\fR\fR
 .ad
 .RS 15n
-.rt  
 List or set the \fBchecksum\fR method.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCHECKSUM\fR\fR
 .ad
 .RS 15n
-.rt  
 Give the \fBchecksum\fR of a file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCHMOD\fR\fR
 .ad
 .RS 15n
-.rt  
 Change mode of a file. For example, \fBSITE CHMOD 755 \fIfilename\fR\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEXEC\fR\fR
 .ad
 .RS 15n
-.rt  
 Execute a program. For example, \fBSITE EXEC program params\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBGPASS\fR\fR
 .ad
 .RS 15n
-.rt  
 Give special group access password. For example, \fBSITE GPASS bar\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBGROUP\fR\fR
 .ad
 .RS 15n
-.rt  
 Request special group access. For example, \fBSITE GROUP foo\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBGROUPS\fR\fR
 .ad
 .RS 15n
-.rt  
 List supplementary group membership.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBHELP\fR\fR
 .ad
 .RS 15n
-.rt  
 Give help information. For example, \fBSITE HELP\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBIDLE\fR\fR
 .ad
 .RS 15n
-.rt  
 Set idle-timer. For example, \fBSITE IDLE 60\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBUMASK\fR\fR
 .ad
 .RS 15n
-.rt  
 Change \fBumask\fR. For example, \fBSITE UMASK 002\fR.
 .RE
 
@@ -1196,7 +1018,6 @@ The \fBin.ftpd\fR command is IPv6-enabled. See \fBip6\fR(7P).
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ftpd/ftpaccess\fR\fR
 .ad
@@ -1207,7 +1028,6 @@ FTP Server configuration file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ftpd/ftpconversions\fR\fR
 .ad
@@ -1218,7 +1038,6 @@ FTP Server conversions database
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ftpd/ftpgroups\fR\fR
 .ad
@@ -1229,7 +1048,6 @@ FTP Server enhanced group access file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ftpd/ftphosts\fR\fR
 .ad
@@ -1240,7 +1058,6 @@ FTP Server individual user host access file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ftpd/ftpservers\fR\fR
 .ad
@@ -1251,7 +1068,6 @@ FTP Server virtual hosting configuration file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ftpd/ftpusers\fR\fR
 .ad
@@ -1262,7 +1078,6 @@ File listing users for whom FTP login privileges are disallowed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ftpusers\fR\fR
 .ad
@@ -1274,7 +1089,6 @@ this file is deprecated.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/log/xferlog\fR\fR
 .ad
@@ -1285,18 +1099,16 @@ FTP Server transfer log file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/run/ftp.pids-\fIclassname\fR\fR\fR
 .ad
 .sp .6
 .RS 4n
- 
+
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/wtmpx\fR\fR
 .ad
@@ -1314,13 +1126,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityExternal
+Interface Stability	External
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/in.iked.1m b/usr/src/man/man1m/in.iked.1m
index e044993e26..f0bca2a63f 100644
--- a/usr/src/man/man1m/in.iked.1m
+++ b/usr/src/man/man1m/in.iked.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.iked 1M "27 Jan 2009" "SunOS 5.11" "System Administration Commands"
+.TH IN.IKED 1M "Jan 27, 2009"
 .SH NAME
 in.iked \- daemon for the Internet Key Exchange (IKE)
 .SH SYNOPSIS
@@ -149,7 +149,6 @@ example# \fBsvcadm refresh ike\fR
 The following properties are defined for the \fBike\fR service:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconfig/admin_privilege\fR\fR
 .ad
@@ -163,7 +162,6 @@ those for the \fB-p\fR option. See the description of \fB-p\fR in
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconfig/config_file\fR\fR
 .ad
@@ -177,7 +175,6 @@ description of \fB-f\fR in \fBOPTIONS\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconfig/debug_level\fR\fR
 .ad
@@ -194,7 +191,6 @@ in \fBOPTIONS\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconfig/debug_logfile\fR\fR
 .ad
@@ -220,7 +216,6 @@ files should be inspected for errors.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconfig/ignore_errors\fR\fR
 .ad
@@ -312,23 +307,19 @@ the \fBike\fR \fBsmf\fR(5) service should be disabled first. See
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 15n
-.rt  
 Check the syntax of a configuration file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 15n
-.rt  
 Use debug mode. The process stays attached to the controlling terminal and
 produces large amounts of debugging output. This option is deprecated. See
 "Service Management Facility" for more details.
@@ -336,12 +327,10 @@ produces large amounts of debugging output. This option is deprecated. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfilename\fR\fR
 .ad
 .RS 15n
-.rt  
 Use \fIfilename\fR instead of \fB/etc/inet/ike/config\fR. See
 \fBike.config\fR(4) for the format of this file. This option is deprecated. See
 "Service Management Facility" for more details.
@@ -349,12 +338,10 @@ Use \fIfilename\fR instead of \fB/etc/inet/ike/config\fR. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIlevel\fR\fR
 .ad
 .RS 15n
-.rt  
 Specify privilege level (\fIlevel\fR). This option sets how much
 \fBikeadm\fR(1M) invocations can change or observe about the running
 \fBin.iked\fR.
@@ -362,34 +349,28 @@ Specify privilege level (\fIlevel\fR). This option sets how much
 Valid \fIlevels\fR are:
 .sp
 .ne 2
-.mk
 .na
 \fB0\fR
 .ad
 .RS 5n
-.rt  
 Base level
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB1\fR
 .ad
 .RS 5n
-.rt  
 Access to preshared key info
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB2\fR
 .ad
 .RS 5n
-.rt  
 Access to keying material
 .RE
 
@@ -408,7 +389,6 @@ command to limit any corefiles produced by \fBin.iked\fR.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/ike/config\fR\fR
 .ad
@@ -419,7 +399,6 @@ Default configuration file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/secret/ike.privatekeys/*\fR\fR
 .ad
@@ -431,7 +410,6 @@ with the same filename in \fB/etc/inet/ike/publickeys/\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/ike/publickeys/*\fR\fR
 .ad
@@ -443,7 +421,6 @@ private key names.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/ike/crls/*\fR\fR
 .ad
@@ -454,7 +431,6 @@ Public key certificate revocation lists.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/secret/ike.preshared\fR\fR
 .ad
diff --git a/usr/src/man/man1m/in.lpd.1m b/usr/src/man/man1m/in.lpd.1m
index 7c6bb27d8c..2533f55edd 100644
--- a/usr/src/man/man1m/in.lpd.1m
+++ b/usr/src/man/man1m/in.lpd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.lpd 1M "1 Aug 2006" "SunOS 5.11" "System Administration Commands"
+.TH IN.LPD 1M "Aug 1, 2006"
 .SH NAME
 in.lpd \- BSD print protocol adaptor
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/print/in.lpd\fR 
+\fB/usr/lib/print/in.lpd\fR
 .fi
 
 .SH DESCRIPTION
@@ -72,30 +72,25 @@ The following command allows remote access to \fBin.lpd\fR.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-zero\fR
 .ad
 .RS 12n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/printers.conf\fR\fR
 .ad
@@ -106,7 +101,6 @@ System printer configuration database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprinters.conf.byname\fR\fR
 .ad
@@ -117,7 +111,6 @@ System printer configuration database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprinters.org_dir\fR\fR
 .ad
@@ -128,7 +121,6 @@ System printer configuration database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/print/bsd-adaptor/bsd_*.so*\fR\fR
 .ad
diff --git a/usr/src/man/man1m/in.mpathd.1m b/usr/src/man/man1m/in.mpathd.1m
index f7da35120f..aaef8d5542 100644
--- a/usr/src/man/man1m/in.mpathd.1m
+++ b/usr/src/man/man1m/in.mpathd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.mpathd 1M "13 May 2009" "SunOS 5.11" "System Administration Commands"
+.TH IN.MPATHD 1M "May 13, 2009"
 .SH NAME
 in.mpathd \- IP multipathing daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/inet/in.mpathd\fR 
+\fB/usr/lib/inet/in.mpathd\fR
 .fi
 
 .SH DESCRIPTION
@@ -121,12 +121,10 @@ interface in the group fails.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/mpathd\fR\fR
 .ad
 .RS 23n
-.rt  
 Contains default values used by the \fBin.mpathd\fR daemon.
 .RE
 
diff --git a/usr/src/man/man1m/in.ndpd.1m b/usr/src/man/man1m/in.ndpd.1m
index d8fe82bcbf..5693425a89 100644
--- a/usr/src/man/man1m/in.ndpd.1m
+++ b/usr/src/man/man1m/in.ndpd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.ndpd 1M "10 Jan 2007" "SunOS 5.11" "System Administration Commands"
+.TH IN.NDPD 1M "Jan 10, 2007"
 .SH NAME
 in.ndpd \- daemon for IPv6 autoconfiguration
 .SH SYNOPSIS
@@ -165,7 +165,6 @@ service properties are set using a command of the form:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -189,7 +188,6 @@ property to false.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -202,7 +200,6 @@ Use of this option is equivalent to setting the \fBdebug\fR property to true.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \ \fIconfig_file\fR\fR
 .ad
@@ -215,7 +212,6 @@ Use \fIconfig_file\fR for configuration information instead of the default
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
@@ -229,12 +225,10 @@ controlling terminal. As such, this option cannot be run under the SMF.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/ndpd.conf\fR\fR
 .ad
 .RS 23n
-.rt  
 Configuration file. This file is not necessary on a host, but it is required on
 a router to enable \fBin.ndpd\fR to advertise autoconfiguration information to
 the hosts.
diff --git a/usr/src/man/man1m/in.rarpd.1m b/usr/src/man/man1m/in.rarpd.1m
index a2a00ec686..e62a4cc974 100644
--- a/usr/src/man/man1m/in.rarpd.1m
+++ b/usr/src/man/man1m/in.rarpd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.rarpd 1M "20 Aug 2004" "SunOS 5.11" "System Administration Commands"
+.TH IN.RARPD 1M "Aug 20, 2004"
 .SH NAME
 in.rarpd, rarpd \- DARPA Reverse Address Resolution Protocol server
 .SH SYNOPSIS
@@ -43,12 +43,10 @@ message set to communicate directly with the datalink device driver.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 Get the list of available network interfaces from \fBIP\fR using the
 \fBSIOCGIFADDR\fR ioctl and start a \fBRARP\fR daemon process on each interface
 returned.
@@ -56,12 +54,10 @@ returned.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 6n
-.rt  
 Print assorted debugging messages while executing.
 .RE
 
@@ -101,56 +97,46 @@ example# /usr/sbin/in.rarpd le 0
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ethers\fR\fR
 .ad
 .RS 15n
-.rt  
 File or other source, as specified by \fBnsswitch.conf\fR(4).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/hosts\fR\fR
 .ad
 .RS 15n
-.rt  
 File or other source, as specified by \fBnsswitch.conf\fR(4).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/tftpboot\fR\fR
 .ad
 .RS 15n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/ip\fR\fR
 .ad
 .RS 15n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/arp\fR\fR
 .ad
 .RS 15n
-.rt  
 
 .RE
 
diff --git a/usr/src/man/man1m/in.rdisc.1m b/usr/src/man/man1m/in.rdisc.1m
index 3dcf7c3def..780d168805 100644
--- a/usr/src/man/man1m/in.rdisc.1m
+++ b/usr/src/man/man1m/in.rdisc.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.rdisc 1M "9 Nov 2006" "SunOS 5.11" "System Administration Commands"
+.TH IN.RDISC 1M "Nov 9, 2006"
 .SH NAME
 in.rdisc, rdisc \- network router discovery daemon
 .SH SYNOPSIS
@@ -104,12 +104,10 @@ service properties are set using a command of the form:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 17n
-.rt  
 Accept all routers independent of the preference they have in their
 \fIadvertise\fR messages. Normally, \fBin.rdisc\fR only accepts (and enters in
 the kernel routing tables) the router or routers with the highest preference.
@@ -119,12 +117,10 @@ true.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 17n
-.rt  
 Run \fBin.rdisc\fR forever even if no routers are found. Normally,
 \fBin.rdisc\fR gives up if it has not received any \fIadvertise\fR message
 after soliciting three times, in which case it exits with a non-zero exit code.
@@ -134,24 +130,20 @@ For SMF execution, this option is required.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 17n
-.rt  
 Act as a router, rather than a host. Use of this option is equivalent to
 setting the \fBact_as_router\fR property to true.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 17n
-.rt  
 Send three \fIsolicitation\fR messages initially to quickly discover the
 routers when the system is booted. When \fB-s\fR is specified, \fBin.rdisc\fR
 exits with a non-zero exit code if it can not find any routers. This can be
@@ -161,12 +153,10 @@ execution and is not supported for the \fBrdisc\fR service.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIpreference\fR\fR
 .ad
 .RS 17n
-.rt  
 Set the preference transmitted in the \fIsolicitation\fR messages. The default
 is zero. Use of this option is equivalent to setting the \fBpreference\fR
 property.
@@ -174,12 +164,10 @@ property.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fIinterval\fR\fR
 .ad
 .RS 17n
-.rt  
 Set the interval between transmitting the \fIadvertise\fR messages. The default
 time is 600 seconds. Use of this option is equivalent to setting the
 \fBtransmit_interval\fR property.
diff --git a/usr/src/man/man1m/in.rexecd.1m b/usr/src/man/man1m/in.rexecd.1m
index db0210c9f5..aa0031afa7 100644
--- a/usr/src/man/man1m/in.rexecd.1m
+++ b/usr/src/man/man1m/in.rexecd.1m
@@ -4,13 +4,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.rexecd 1M "4 Nov 2004" "SunOS 5.11" "System Administration Commands"
+.TH IN.REXECD 1M "Nov 4, 2004"
 .SH NAME
 in.rexecd, rexecd \- remote execution server
 .SH SYNOPSIS
 .LP
 .nf
-\fBin.rexecd\fR 
+\fBin.rexecd\fR
 .fi
 
 .SH DESCRIPTION
@@ -85,90 +85,74 @@ indicated by a leading byte with a value of 1 (0 is returned in step 7 above
 upon successful completion of all the steps prior to the command execution).
 .sp
 .ne 2
-.mk
 .na
 \fB\fBusername too long\fR\fR
 .ad
 .RS 24n
-.rt  
 The name is longer than 16 characters.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpassword too long\fR\fR
 .ad
 .RS 24n
-.rt  
 The password is longer than 16 characters.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcommand too long\fR\fR
 .ad
 .RS 24n
-.rt  
 The command line passed exceeds the size of the argument list (as configured
 into the system).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLogin incorrect.\fR\fR
 .ad
 .RS 24n
-.rt  
 No password file entry for the user name existed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPassword incorrect.\fR\fR
 .ad
 .RS 24n
-.rt  
 The wrong password was supplied.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNo remote directory.\fR\fR
 .ad
 .RS 24n
-.rt  
 The \fBchdir\fR command to the home directory failed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTry again.\fR\fR
 .ad
 .RS 24n
-.rt  
 A \fBfork\fR by the server failed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/bin/sh: ...\fR\fR
 .ad
 .RS 24n
-.rt  
 The user's login shell could not be started.
 .RE
 
diff --git a/usr/src/man/man1m/in.ripngd.1m b/usr/src/man/man1m/in.ripngd.1m
index c75555cae3..df3a10ace8 100644
--- a/usr/src/man/man1m/in.ripngd.1m
+++ b/usr/src/man/man1m/in.ripngd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.ripngd 1M "26 Jan 2007" "SunOS 5.11" "System Administration Commands"
+.TH IN.RIPNGD 1M "Jan 26, 2007"
 .SH NAME
 in.ripngd \- network routing daemon for IPv6
 .SH SYNOPSIS
@@ -125,12 +125,10 @@ options are the equivalent SMF property values. These are set for the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIn\fR\fR
 .ad
 .RS 8n
-.rt  
 Send and receive the routing packets from other routers using the \fBUDP \fR
 port number \fIn\fR. Use of this option is equivalent to setting the
 \fBudp_port\fR property.
@@ -138,36 +136,30 @@ port number \fIn\fR. Use of this option is equivalent to setting the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR\fR
 .ad
 .RS 8n
-.rt  
 Do not use poison reverse. Use of this option is equivalent to setting the
 \fBpoison_reverse\fR property to false.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
 .RS 8n
-.rt  
 Do not supply routing information. Use of this option is equivalent to setting
 the \fBquiet_mode\fR property to true.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 8n
-.rt  
 Force \fBin.ripngd\fR to supply routing information whether it is acting as an
 internetwork router or not. Use of this option is equivalent to setting the
 \fBsupply_routes\fR property to true.
@@ -175,12 +167,10 @@ internetwork router or not. Use of this option is equivalent to setting the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
 .RS 8n
-.rt  
 Print all packets sent or received to standard output. \fBin.ripngd\fR will not
 divorce itself from the controlling terminal. Accordingly, interrupts from the
 keyboard will kill the process. Not supported by the \fBripng\fR service.
@@ -188,12 +178,10 @@ keyboard will kill the process. Not supported by the \fBripng\fR service.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 8n
-.rt  
 Print all changes made to the routing tables to standard output with a
 timestamp. Use of this option is equivalent to setting the \fBverbose\fR
 property to true.
diff --git a/usr/src/man/man1m/in.rlogind.1m b/usr/src/man/man1m/in.rlogind.1m
index 4b22e35a6a..9d1595393c 100644
--- a/usr/src/man/man1m/in.rlogind.1m
+++ b/usr/src/man/man1m/in.rlogind.1m
@@ -1,16 +1,16 @@
 '\" te
-.\" Copyright 1989 AT&T 
+.\" Copyright 1989 AT&T
 .\" Copyright (C) 2005, Sun Microsystems, Inc. All Rights Reserved
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.rlogind 1M "10 Nov 2005" "SunOS 5.11" "System Administration Commands"
+.TH IN.RLOGIND 1M "Nov 10, 2005"
 .SH NAME
 in.rlogind, rlogind \- remote login server
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/in.rlogind\fR [\fB-k5eExXciPp\fR] [\fB-s\fR \fItos\fR] [\fB-S\fR \fIkeytab\fR] 
+\fB/usr/sbin/in.rlogind\fR [\fB-k5eExXciPp\fR] [\fB-s\fR \fItos\fR] [\fB-S\fR \fIkeytab\fR]
      [\fB-M\fR \fIrealm\fR]
 .fi
 
@@ -109,23 +109,19 @@ variable, \fBTERM\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-5\fR\fR
 .ad
 .RS 13n
-.rt  
 Same as \fB-k\fR, for backwards compatibility.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 13n
-.rt  
 Requires Kerberos V5 clients to present a cryptographic checksum of initial
 connection information like the name of the user that the client is  trying  to
 access in the initial authenticator. This checksum provides additionl security
@@ -135,34 +131,28 @@ This option is mutually exclusive with the \fB-i\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
 .RS 13n
-.rt  
 Creates an encrypted session.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-E\fR\fR
 .ad
 .RS 13n
-.rt  
 Same as \fB-e\fR, for backwards compatibility.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 13n
-.rt  
 Ignores authenticator checksums if provided. This option ignores authenticator
 checksums presented by current Kerberos clients to protect initial connection
 information. Option \fB-i\fR is the opposite of option \fB-c\fR.
@@ -170,12 +160,10 @@ information. Option \fB-i\fR is the opposite of option \fB-c\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR\fR
 .ad
 .RS 13n
-.rt  
 Allows Kerberos V5 authentication with the \fB\&.k5login\fR access control file
 to be trusted. If this authentication system is used by the client and the
 authorization check is passed, then the user is allowed to log in.
@@ -183,80 +171,66 @@ authorization check is passed, then the user is allowed to log in.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR \fIrealm\fR\fR
 .ad
 .RS 13n
-.rt  
 Uses the indicated Kerberos V5 realm. By default, the daemon will determine its
 realm from the settings in the \fBkrb5.conf\fR(4) file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 13n
-.rt  
 Prompts for authentication only if other authentication checks fail.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR\fR
 .ad
 .RS 13n
-.rt  
 Prompts for a password in addition to other authentication methods.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fItos\fR\fR
 .ad
 .RS 13n
-.rt  
 Sets the \fBIP\fR \fBTOS\fR option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR \fIkeytab\fR\fR
 .ad
 .RS 13n
-.rt  
 Sets the \fBKRB5\fR keytab file to use. The\fB/etc/krb5/krb5.keytab\fR file is
 used by default.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
 .RS 13n
-.rt  
 Same as \fB-e\fR, for backwards compatibility.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-X\fR\fR
 .ad
 .RS 13n
-.rt  
 Same as \fB-e\fR, for backwards compatibility.
 .RE
 
@@ -292,20 +266,18 @@ session management, and password management modules.
 
 .sp
 .TS
-tab();
-lw(0i) lw(1.38i) lw(4.13i) 
-lw(0i) lw(1.38i) lw(4.13i) 
-.
-rloginauth sufficientpam_rhosts_auth.so.1
-rloginauth requisitepam_authtok_get.so.1
-rloginauth requiredpam_dhkeys.so.1
-rloginauth requiredpam_unix_auth.so.1
-
-rloginaccount requiredpam_unix_roles.so.1
-rloginaccount requiredpam_unix_projects.so.1
-rloginaccount requiredpam_unix_account.so.1
-
-rloginsession requiredpam_unix_session.so.1
+l l l
+l l l .
+rlogin	auth sufficient	pam_rhosts_auth.so.1
+rlogin	auth requisite	pam_authtok_get.so.1
+rlogin	auth required	pam_dhkeys.so.1
+rlogin	auth required	pam_unix_auth.so.1
+		
+rlogin	account required	pam_unix_roles.so.1
+rlogin	account required	pam_unix_projects.so.1
+rlogin	account required	pam_unix_account.so.1
+		
+rlogin	session required	pam_unix_session.so.1
 .TE
 
 .sp
@@ -353,7 +325,6 @@ All diagnostic messages are returned on the connection associated with the
 indicated by a leading byte with a value of 1.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBHostname for your address unknown.\fR\fR
 .ad
@@ -364,7 +335,6 @@ No entry in the host name database existed for the client's machine.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTry again.\fR\fR
 .ad
@@ -375,7 +345,6 @@ A \fIfork\fR by the server failed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/bin/sh:\fR .\|.\|.\fR
 .ad
diff --git a/usr/src/man/man1m/in.routed.1m b/usr/src/man/man1m/in.routed.1m
index 35b7ca4552..59c8a61856 100644
--- a/usr/src/man/man1m/in.routed.1m
+++ b/usr/src/man/man1m/in.routed.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.routed 1M "24 Jul 2008" "SunOS 5.11" "System Administration Commands"
+.TH IN.ROUTED 1M "Jul 24, 2008"
 .SH NAME
 in.routed, routed \- network routing daemon
 .SH SYNOPSIS
@@ -205,7 +205,6 @@ described, and can be set by means of a command of the form:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR\fR
 .ad
@@ -221,7 +220,6 @@ property value to false.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -233,7 +231,6 @@ not usable under the SMF.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fBnet[/\fImask\fR][,\fImetric\fR]\fR\fR
 .ad
@@ -253,7 +250,6 @@ Use of this option is equivalent to setting the \fBminimize_routes\fR property.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR\fR
 .ad
@@ -274,7 +270,6 @@ the \fBoffer_default_route\fR property to true.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -289,7 +284,6 @@ equivalent to setting the \fBadvertise_host_routes\fR property to false.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
@@ -307,7 +301,6 @@ setting the \fBadvertise_host_routes_primary\fR property to true.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -320,7 +313,6 @@ property to false.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIparams\fR\fR
 .ad
@@ -332,7 +324,6 @@ file. Can also be set by means of the \fBparameters\fR property.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
@@ -346,7 +337,6 @@ option is equivalent to setting the \fBquiet_mode\fR property to true.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
@@ -361,7 +351,6 @@ the \fBsupply_routes\fR property to true.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR\fR
 .ad
@@ -378,7 +367,6 @@ discouraged. Use of this option is equivalent to setting the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
@@ -391,7 +379,6 @@ Solaris and has no SMF equivalent.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fItracefile\fR\fR
 .ad
@@ -405,7 +392,6 @@ is equivalent to setting the \fBlog_file\fR property to \fBtrace file path\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -419,7 +405,6 @@ requires the \fB-T\fR option. Use of this option is equivalent to setting the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
@@ -430,7 +415,6 @@ Displays the version of the daemon.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-z\fR\fR
 .ad
@@ -445,24 +429,20 @@ the \fBrtquery\fR(1M) command.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/defaultrouter\fR\fR
 .ad
 .RS 22n
-.rt  
 If this file is present and contains the address of a default router, the
 system startup script does not run \fBin.routed\fR. See \fBdefaultrouter\fR(4).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/gateways\fR\fR
 .ad
 .RS 22n
-.rt  
 List of distant gateways and general configuration options for \fBin.routed\fR.
 See \fBgateways\fR(4).
 .RE
diff --git a/usr/src/man/man1m/in.rshd.1m b/usr/src/man/man1m/in.rshd.1m
index 74d6bb2135..882784155f 100644
--- a/usr/src/man/man1m/in.rshd.1m
+++ b/usr/src/man/man1m/in.rshd.1m
@@ -4,13 +4,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.rshd 1M "10 Nov 2005" "SunOS 5.11" "System Administration Commands"
+.TH IN.RSHD 1M "Nov 10, 2005"
 .SH NAME
 in.rshd, rshd \- remote shell server
 .SH SYNOPSIS
 .LP
 .nf
-\fBin.rshd\fR [\fB-k5eciU\fR] [\fB-s\fR \fItos\fR] [\fB-S\fR \fIkeytab\fR] [\fB-M\fR \fIrealm\fR] 
+\fBin.rshd\fR [\fB-k5eciU\fR] [\fB-s\fR \fItos\fR] [\fB-S\fR \fIkeytab\fR] [\fB-M\fR \fIrealm\fR]
      [\fB-L\fR \fIenv_var\fR] \fIhost.port\fR
 .fi
 
@@ -140,23 +140,19 @@ passed to the normal login shell of the user. The \fBPATH\fR variable is set to
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-5\fR\fR
 .ad
 .RS 14n
-.rt  
 Same as \fB-k\fR, for backwards compatibility
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 14n
-.rt  
 Requires Kerberos V5 clients to present a cryptographic checksum of initial
 connection information like the name of the user that the client is trying to
 access in the initial authenticator. This checksum provides additionl security
@@ -166,23 +162,19 @@ This option is mutually exclusive with the \fB-i\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
 .RS 14n
-.rt  
 Requires the client to encrypt the connection.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 14n
-.rt  
 Ignores authenticator checksums if provided. This option ignores authenticator
 checksums presented by current Kerberos clients to protect initial connection
 information. Option \fB-i\fR is the opposite of option \fB-c\fR.
@@ -190,12 +182,10 @@ information. Option \fB-i\fR is the opposite of option \fB-c\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR\fR
 .ad
 .RS 14n
-.rt  
 Allows Kerberos V5 authentication with the \fB\&.k5login\fR access control file
 to be trusted. If this authentication system is used by the client and the
 authorization check is passed, then the user is allowed to log in.
@@ -203,58 +193,48 @@ authorization check is passed, then the user is allowed to log in.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR \fIenv_var\fR\fR
 .ad
 .RS 14n
-.rt  
 List of environment variables that need to be saved and passed along.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR \fIrealm\fR\fR
 .ad
 .RS 14n
-.rt  
 Uses the indicated Kerberos V5 realm. By default, the daemon will determine its
 realm from the settings in the \fBkrb5.conf\fR(4) file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fItos\fR\fR
 .ad
 .RS 14n
-.rt  
 Sets the \fBIP\fR \fBTOS\fR option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR \fIkeytab\fR\fR
 .ad
 .RS 14n
-.rt  
 Sets the \fBKRB5\fR keytab file to use. The\fB/etc/krb5/krb5.keytab\fR file is
 used by default.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-U\fR\fR
 .ad
 .RS 14n
-.rt  
 Refuses connections that cannot be mapped to a name through the
 \fBgetnameinfo\fR(3SOCKET) function.
 .RE
@@ -289,17 +269,15 @@ module.
 
 .sp
 .TS
-tab();
-lw(.79i) lw(.79i) lw(.79i) lw(3.14i) 
-lw(.79i) lw(.79i) lw(.79i) lw(3.14i) 
-.
-rshauthrequiredpam_rhosts_auth.so.1
-
-rshaccountrequiredpam_unix_roles.so.1
-rshsessionrequiredpam_unix_projects.so.1
-rshsessionrequiredpam_unix_account.so.1
-
-rshsessionrequiredpam_unix_session.so.1
+l l l l
+l l l l .
+rsh	auth	required	pam_rhosts_auth.so.1
+			
+rsh	account	required	pam_unix_roles.so.1
+rsh	session	required	pam_unix_projects.so.1
+rsh	session	required	pam_unix_account.so.1
+			
+rsh	session	required	pam_unix_session.so.1
 .TE
 
 .sp
@@ -319,23 +297,19 @@ service name is \fBkrsh\fR.
 \fB/etc/hosts.equiv\fR
 .sp
 .ne 2
-.mk
 .na
 \fB\fB$HOME/.k5login\fR\fR
 .ad
 .RS 23n
-.rt  
 File containing Kerberos principals that are allowed access.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/krb5.conf\fR\fR
 .ad
 .RS 23n
-.rt  
 Kerberos configuration file.
 .RE
 
@@ -363,7 +337,6 @@ returned above upon successful completion of all the steps prior to the command
 execution).
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlocuser too long\fR\fR
 .ad
@@ -374,7 +347,6 @@ The name of the user on the client's machine is longer than 16 characters.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremuser too long\fR\fR
 .ad
@@ -385,7 +357,6 @@ The name of the user on the remote machine is longer than 16 characters.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcommand too long\fR\fR
 .ad
@@ -397,7 +368,6 @@ into the system).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBHostname for your address unknown.\fR\fR
 .ad
@@ -408,7 +378,6 @@ No entry in the host name database existed for the client's machine.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLogin incorrect.\fR\fR
 .ad
@@ -419,7 +388,6 @@ No password file entry for the user name existed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPermission denied.\fR\fR
 .ad
@@ -430,7 +398,6 @@ The authentication procedure described above failed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCan't make pipe.\fR\fR
 .ad
@@ -441,7 +408,6 @@ The pipe needed for the \fBstderr\fR was not created.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTry again.\fR\fR
 .ad
diff --git a/usr/src/man/man1m/in.rwhod.1m b/usr/src/man/man1m/in.rwhod.1m
index 9a0a0bdb06..674aa9ed4a 100644
--- a/usr/src/man/man1m/in.rwhod.1m
+++ b/usr/src/man/man1m/in.rwhod.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.rwhod 1M "8 Dec 2001" "SunOS 5.11" "System Administration Commands"
+.TH IN.RWHOD 1M "Dec 8, 2001"
 .SH NAME
 in.rwhod, rwhod \- system status server
 .SH SYNOPSIS
@@ -36,23 +36,23 @@ form:
 .sp
 .in +2
 .nf
-struct  outmp {      
-        char     out_line[8];   /* tty name */      
-        char     out_name[8];   /* user id */      
-        long     out_time;      /* time on */ 
-}; 
-struct  whod {      
-        char     wd_vers;      
-        char     wd_type;      
-        char     wd_fill[2];     
-        int      wd_sendtime;      
-        int      wd_recvtime;      
-        char     wd_hostname[32];      
-        int      wd_loadav[3];      
-        int      wd_boottime;      
-        struct   whoent {           
-                 struct   outmp we_utmp;           
-                 int      we_idle;      
+struct  outmp {
+        char     out_line[8];   /* tty name */
+        char     out_name[8];   /* user id */
+        long     out_time;      /* time on */
+};
+struct  whod {
+        char     wd_vers;
+        char     wd_type;
+        char     wd_fill[2];
+        int      wd_sendtime;
+        int      wd_recvtime;
+        char     wd_hostname[32];
+        int      wd_loadav[3];
+        int      wd_boottime;
+        struct   whoent {
+                 struct   outmp we_utmp;
+                 int      we_idle;
      } wd_we[1024 / sizeof (struct whoent)];
  };
 .fi
@@ -87,12 +87,10 @@ Status messages are generated approximately once every 3 minutes.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-m\fR\fB \fR[\fI ttl \fR]\fR
 .ad
 .RS 14n
-.rt  
 Use the rwho  \fBIP\fR multicast address (224.0.1.3) when transmitting. Receive
 announcements both on this multicast address and on the  \fBIP\fR broadcast
 address. If  \fIttl\fR is not specified  \fBin.rwhod\fR multicasts on all
@@ -105,12 +103,10 @@ the specified  \fIttl\fR.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/spool/rwho/whod.*\fR\fR
 .ad
 .RS 26n
-.rt  
 information about other machines
 .RE
 
diff --git a/usr/src/man/man1m/in.talkd.1m b/usr/src/man/man1m/in.talkd.1m
index 7b568bdd4d..79e4e5d4a2 100644
--- a/usr/src/man/man1m/in.talkd.1m
+++ b/usr/src/man/man1m/in.talkd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.talkd 1M "31 Jul 2004" "SunOS 5.11" "System Administration Commands"
+.TH IN.TALKD 1M "Jul 31, 2004"
 .SH NAME
 in.talkd, talkd \- server for talk program
 .SH SYNOPSIS
 .LP
 .nf
-\fBin.talkd\fR 
+\fBin.talkd\fR
 .fi
 
 .SH DESCRIPTION
diff --git a/usr/src/man/man1m/in.telnetd.1m b/usr/src/man/man1m/in.telnetd.1m
index a175c2d250..2dfa35a1d1 100644
--- a/usr/src/man/man1m/in.telnetd.1m
+++ b/usr/src/man/man1m/in.telnetd.1m
@@ -4,13 +4,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.telnetd 1M "10 Nov 2005" "SunOS 5.11" "System Administration Commands"
+.TH IN.TELNETD 1M "Nov 10, 2005"
 .SH NAME
 in.telnetd, telnetd \- DARPA TELNET protocol server
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/in.telnetd\fR [\fB-a\fR \fIauthmode\fR] [\fB-EXUh\fR] [\fB-s\fR \fItos\fR] 
+\fB/usr/sbin/in.telnetd\fR [\fB-a\fR \fIauthmode\fR] [\fB-EXUh\fR] [\fB-s\fR \fItos\fR]
      [\fB-S\fR \fIkeytab\fR] [\fB-M\fR \fIrealm\fR]
 .fi
 
@@ -99,22 +99,18 @@ BANNER=""
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIauthmode\fR\fR
 .ad
 .RS 15n
-.rt  
 This option may be used for specifying what mode should be used for
 authentication. There are several valid values for \fIauthmode\fR:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvalid\fR\fR
 .ad
 .RS 9n
-.rt  
 Only allows connections when the remote user can provide valid authentication
 information to identify the remote user, and is allowed access to the specified
 account without providing a password.
@@ -122,12 +118,10 @@ account without providing a password.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBuser\fR\fR
 .ad
 .RS 9n
-.rt  
 Only allows connections when the remote user can provide valid authentication
 information to identify the remote user. The \fBlogin\fR(1) command will
 provide any additional user verification needed if the remote user is not
@@ -136,12 +130,10 @@ allowed automatic access to the specified account.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnone\fR\fR
 .ad
 .RS 9n
-.rt  
 This is the default state. Authentication information is not required. If no or
 insufficient authentication information is provided, then the \fBlogin\fR(1)
 program provides the necessary user verification.
@@ -149,12 +141,10 @@ program provides the necessary user verification.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBoff\fR\fR
 .ad
 .RS 9n
-.rt  
 This disables the authentication code. All user verification happens through
 the \fBlogin\fR(1) program.
 .RE
@@ -163,81 +153,67 @@ the \fBlogin\fR(1) program.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-E\fR\fR
 .ad
 .RS 15n
-.rt  
 Disables encryption support negotiation.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 15n
-.rt  
 Disables displaying host specific information before login has been completed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR \fIrealm\fR\fR
 .ad
 .RS 15n
-.rt  
 Uses the indicated Kerberos V5 realm. By default, the daemon will determine its
 realm from the settings in the \fBkrb5.conf\fR(4) file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fItos\fR\fR
 .ad
 .RS 15n
-.rt  
 Sets the \fBIP\fR \fBTOS\fR option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR \fIkeytab\fR\fR
 .ad
 .RS 15n
-.rt  
 Sets the \fBKRB5\fR keytab file to use. The\fB/etc/krb5/krb5.keytab\fR file is
 used by default.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-U\fR\fR
 .ad
 .RS 15n
-.rt  
 Refuses connections that cannot be mapped to a name through the
 \fBgetnameinfo\fR(3SOCKET) function.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-X\fR\fR
 .ad
 .RS 15n
-.rt  
 Disables Kerberos V5 authentication support negotiation.
 .RE
 
@@ -315,13 +291,11 @@ For a Kerberized telnet service, the correct \fBPAM\fR service name is
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/telnetd\fR\fR
 .ad
 .RS 24n
-.rt  
- 
+
 .RE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/in.tftpd.1m b/usr/src/man/man1m/in.tftpd.1m
index 92ef32c23e..dd0cce6db6 100644
--- a/usr/src/man/man1m/in.tftpd.1m
+++ b/usr/src/man/man1m/in.tftpd.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.tftpd 1M "5 Nov 2008" "SunOS 5.11" "System Administration Commands"
+.TH IN.TFTPD 1M "Nov 5, 2008"
 .SH NAME
 in.tftpd, tftpd \- Internet Trivial File Transfer Protocol server
 .SH SYNOPSIS
@@ -39,35 +39,29 @@ group. However, nothing checks this assumption or enforces this restriction.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 15n
-.rt  
 Debug. When specified it sets the \fBSO_DEBUG\fR socket option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 15n
-.rt  
 Secure. When specified, the directory change to \fIhomedir\fR must succeed. The
 daemon also changes its root directory to \fIhomedir\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fIrexmtval\fR\fR
 .ad
 .RS 15n
-.rt  
 Specifies the value of the retransmission timeout in seconds. This also affects
 the maximum session timeout in that the latter is set to five times the
 retransmission timeout value.
diff --git a/usr/src/man/man1m/in.timed.1m b/usr/src/man/man1m/in.timed.1m
index 991fa63197..f80a8c839f 100644
--- a/usr/src/man/man1m/in.timed.1m
+++ b/usr/src/man/man1m/in.timed.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.timed 1M "23 Aug 2004" "SunOS 5.11" "System Administration Commands"
+.TH IN.TIMED 1M "Aug 23, 2004"
 .SH NAME
 in.timed \- UDP or TCP time protocol service daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fBin.timed\fR 
+\fBin.timed\fR
 .fi
 
 .LP
@@ -35,24 +35,20 @@ The in.timed service is an \fBinetd\fR(1M) \fBsmf\fR(5) delegated service. The
 is passed by the \fBinetd\fR daemon.
 .sp
 .ne 2
-.mk
 .na
 \fBTCP-based service\fR
 .ad
 .RS 21n
-.rt  
 Once a connection is established, the \fBin.timed\fR sends the time as a 32-bit
 binary number and closes the connection. Any received data is ignored.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBUDP-based service\fR
 .ad
 .RS 21n
-.rt  
 The \fBin.timed\fR listens for UDP datagrams. When a datagram is received, the
 server generates a UDP datagram containing the time as a 32-bit binary number
 and sends it to the client. Any received data is ignored.
@@ -66,13 +62,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/in.uucpd.1m b/usr/src/man/man1m/in.uucpd.1m
index 652d483f20..f8fac56b7c 100644
--- a/usr/src/man/man1m/in.uucpd.1m
+++ b/usr/src/man/man1m/in.uucpd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH in.uucpd 1M "12 Aug 2004" "SunOS 5.11" "System Administration Commands"
+.TH IN.UUCPD 1M "Aug 12, 2004"
 .SH NAME
 in.uucpd, uucpd \- UUCP server
 .SH SYNOPSIS
@@ -79,34 +79,28 @@ then the peer may be prompted for multiple passwords.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/utmpx\fR\fR
 .ad
 .RS 20n
-.rt  
 accounting
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/wtmpx\fR\fR
 .ad
 .RS 20n
-.rt  
 accounting
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/lastlog\fR\fR
 .ad
 .RS 20n
-.rt  
 time of last login
 .RE
 
@@ -126,34 +120,28 @@ All diagnostic messages are returned on the connection, after which the
 connection is closed.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBuser read\fR\fR
 .ad
 .RS 20n
-.rt  
 An error occurred while reading the username.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpasswd read\fR\fR
 .ad
 .RS 20n
-.rt  
 An error occurred while reading the password.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLogin incorrect.\fR\fR
 .ad
 .RS 20n
-.rt  
 The username is invalid or refers to an account with a login shell other than
 \fB/usr/lib/uucp/uucico\fR, or the password is not the correct password for the
 account.
diff --git a/usr/src/man/man1m/inetadm.1m b/usr/src/man/man1m/inetadm.1m
index 5ee16f118c..0164a4391e 100644
--- a/usr/src/man/man1m/inetadm.1m
+++ b/usr/src/man/man1m/inetadm.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH inetadm 1M "5 Jul 2007" "SunOS 5.11" "System Administration Commands"
+.TH INETADM 1M "Jul 5, 2007"
 .SH NAME
 inetadm \- observe or configure inetd-controlled services
 .SH SYNOPSIS
 .LP
 .nf
-\fBinetadm\fR 
+\fBinetadm\fR
 .fi
 
 .LP
@@ -107,7 +107,6 @@ each of the possible names and the allowed values is found in the
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-?\fR\fR
 .ad
@@ -118,7 +117,6 @@ Display a usage message.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
@@ -131,7 +129,6 @@ is listed as TRUE or FALSE.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR {\fIFMRI\fR | \fIpattern\fR}...\fR
 .ad
@@ -146,7 +143,6 @@ properties do not have a specified service instance default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR {\fIFMRI\fR | \fIpattern\fR}...\fR
 .ad
@@ -157,7 +153,6 @@ Enable the specified service instances.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR {\fIFMRI\fR | \fIpattern\fR}...\fR
 .ad
@@ -168,7 +163,6 @@ Disable the specified service instances.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR {\fIFMRI\fR | \fIpattern\fR}...{\fIname\fR=\fIvalue\fR}...\fR
 .ad
@@ -183,7 +177,6 @@ for example, \fBname=\fR .
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR {\fIname\fR=\fIvalue\fR}...\fR
 .ad
@@ -299,35 +292,29 @@ default  connection_backlog=10
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Operation completed successfully.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 A fatal error occurred. An accompanying error message will provide further
 information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Invalid arguments were supplied, such as an ambiguous service FMRI or pattern.
 .RE
 
@@ -339,13 +326,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/inetconv.1m b/usr/src/man/man1m/inetconv.1m
index 67c4b8f79d..6e7aff1b2f 100644
--- a/usr/src/man/man1m/inetconv.1m
+++ b/usr/src/man/man1m/inetconv.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH inetconv 1M "21 Oct 2004" "SunOS 5.11" "System Administration Commands"
+.TH INETCONV 1M "Oct 21, 2004"
 .SH NAME
 inetconv \- convert \fBinetd.conf\fR entries into smf service manifests, import
 them into smf repository
@@ -67,34 +67,28 @@ The input file is left untouched by the conversion process.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-?\fR\fR
 .ad
 .RS 14n
-.rt  
 Display a usage message.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
 .RS 14n
-.rt  
 Enable \fBsmf\fR services which are listed in the input file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 14n
-.rt  
 If a service manifest of the same name as the one to be generated is found in
 the destination directory, \fBinetconv\fR will overwrite that manifest if this
 option is specified. Otherwise, an error message is generated and the
@@ -103,24 +97,20 @@ conversion of that service is not performed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIsrcfile\fR\fR
 .ad
 .RS 14n
-.rt  
 Permits the specification of an alternate input file \fIsrcfile\fR. If this
 option is not specified, then the \fBinetd.conf\fR(4) file is used as input.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 14n
-.rt  
 Turns off the auto-import of the manifests generated during the conversion
 process. Later, if you want to import a generated manifest into the
 \fBsmf\fR(5) repository, you can do so through the use of the \fBsvccfg\fR(1M)
@@ -132,12 +122,10 @@ If the \fB-e\fR option is specified, the \fB-n\fR option only displays the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 14n
-.rt  
 Permits the specification of an alternate destination directory \fIdestdir\fR
 for the generated manifests. If this option is not specified, then the
 manifests are placed in \fB/var/svc/manifest/network/rpc\fR, if the service is
@@ -186,64 +174,53 @@ telnet -> /var/tmp/telnet-tcp6.xml
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Operation completed successfully (no errors).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Invalid options specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 One or more service lines are malformed, and thus no manifest(s) were generated
 for them.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 5n
-.rt  
 An error occurred importing one or more of the generated manifests.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR\fR
 .ad
 .RS 5n
-.rt  
 A system error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/svc/manifest/network/{rpc}/\fI<svcname>\fR-\fI<proto>\fR\&.xml\fR\fR
 .ad
@@ -260,13 +237,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/inetd.1m b/usr/src/man/man1m/inetd.1m
index 9fb097f67a..c51a4aec29 100644
--- a/usr/src/man/man1m/inetd.1m
+++ b/usr/src/man/man1m/inetd.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH inetd 1M "5 Jul 2007" "SunOS 5.11" "System Administration Commands"
+.TH INETD 1M "Jul 5, 2007"
 .SH NAME
 inetd \- Solaris Management Facility delegated restarter for inet services
 .SH SYNOPSIS
@@ -74,7 +74,6 @@ up of the \fBsmf\fR(5) set of states. The semantics of these states are as
 follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBuninitialized\fR\fR
 .ad
@@ -85,7 +84,6 @@ follows:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBonline\fR\fR
 .ad
@@ -97,7 +95,6 @@ connections active.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdegraded\fR\fR
 .ad
@@ -111,7 +108,6 @@ active.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBoffline\fR\fR
 .ad
@@ -156,7 +152,6 @@ a listen attempt is successful or the retry limit is reached.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisabled\fR\fR
 .ad
@@ -169,7 +164,6 @@ exit this state.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmaintenance\fR\fR
 .ad
@@ -199,7 +193,6 @@ As part of certain state transitions \fBinetd\fR will execute, if supplied, one
 of a set of methods provided by the service. The set of supported methods are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinetd_start\fR\fR
 .ad
@@ -212,7 +205,6 @@ connections, this method is not executed as part of a state transition.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinetd_offline\fR\fR
 .ad
@@ -228,7 +220,6 @@ required to be implemented for a \fBwait\fR-type service.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinetd_online\fR\fR
 .ad
@@ -241,7 +232,6 @@ preparation prior to a service starting to handle requests.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinetd_disable\fR\fR
 .ad
@@ -254,7 +244,6 @@ being terminated.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinetd_refresh\fR\fR
 .ad
@@ -301,7 +290,6 @@ The basic configuration of a service is stored in a property group named
 are as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbind_addr\fR\fR
 .ad
@@ -314,7 +302,6 @@ interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbind_fail_interval\fR\fR
 .ad
@@ -327,7 +314,6 @@ failure is handled the same as exceeding \fBbind_fail_max\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbind_fail_max\fR\fR
 .ad
@@ -343,7 +329,6 @@ otherwise, if not all of the protocols were bound to, the service goes to the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcon_rate_offline\fR\fR
 .ad
@@ -356,7 +341,6 @@ specify that connection rate limiting is disabled.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconnection_backlog\fR\fR
 .ad
@@ -368,7 +352,6 @@ requests that can be queued at the listening endpoints for servers.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBendpoint_type\fR\fR
 .ad
@@ -381,7 +364,6 @@ TLI-based service. Valid socket type values are: \fBstream\fR, \fBdgram\fR,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfailrate_cnt\fR\fR
 .ad
@@ -401,7 +383,6 @@ is equivalent to the \fB-r\fR option of the previous \fBinetd\fR. The values
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfailrate_interval\fR\fR
 .ad
@@ -413,7 +394,6 @@ and \fB-1\fR specify that the failure rate limit feature is disabled.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinherit_env\fR\fR
 .ad
@@ -428,7 +408,6 @@ are described in \fBsmf_method\fR(5).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBisrpc\fR\fR
 .ad
@@ -439,7 +418,6 @@ If true, this is an RPC service.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmax_con_rate\fR\fR
 .ad
@@ -452,7 +430,6 @@ connection rate limiting is disabled.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmax_copies\fR\fR
 .ad
@@ -465,7 +442,6 @@ disabled.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBname\fR\fR
 .ad
@@ -495,7 +471,6 @@ if \fBisrpc\fR is set to \fBtrue\fR, a valid RPC program number.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBproto\fR\fR
 .ad
@@ -515,7 +490,6 @@ mapped ones). See "Configuring Protocols for Sockets-Based Services," below.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrpc_low_version\fR\fR
 .ad
@@ -526,7 +500,6 @@ Lowest supported RPC version. Required when \fBisrpc\fR is set to \fBtrue\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrpc_high_version\fR\fR
 .ad
@@ -537,7 +510,6 @@ Highest supported RPC version. Required when \fBisrpc\fR is set to \fBtrue\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtcp_trace\fR\fR
 .ad
@@ -557,7 +529,6 @@ facility.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtcp_wrappers\fR\fR
 .ad
@@ -584,7 +555,6 @@ of the standard Solaris man pages, available at \fB/usr/man\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwait\fR\fR
 .ad
@@ -724,7 +694,6 @@ IPv4 and IPv6.
 restarter, \fBsvc.startd\fR(1M).
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstart\fR\fR
 .ad
@@ -744,7 +713,6 @@ is logged in \fBsyslog\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstop\fR\fR
 .ad
@@ -758,7 +726,6 @@ methods in the process.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrefresh\fR\fR
 .ad
@@ -809,7 +776,6 @@ No options are supported.
 .SH OPERANDS
 .sp
 .ne 2
-.mk
 .na
 \fB\fIconfiguration-file\fR\fR
 .ad
@@ -821,7 +787,6 @@ Specifies an alternate location for the legacy service file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstart\fR|\fBstop\fR|\fBrefresh\fR\fR
 .ad
@@ -844,9 +809,9 @@ IPv4 and IPv6 and assign \fBproto\fR properties to those services.
 example# \fBsvcs -a | grep mysvc\fR
 online         15:48:29 svc:/network/mysvc:dgram4
 online         15:48:29 svc:/network/mysvc:dgram6
-online         15:51:47 svc:/network/mysvc:stream4  
-online         15:52:10 svc:/network/mysvc:stream6  
- 
+online         15:51:47 svc:/network/mysvc:stream4
+online         15:52:10 svc:/network/mysvc:stream6
+
 # \fBinetadm -M network/rpc/mysvc:dgram4 proto=udp\fR
 # \fBinetadm -M network/rpc/mysvc:dgram6 proto=udp6only\fR
 # \fBinetadm -M network/rpc/mysvc:stream4 proto=tcp\fR
@@ -867,13 +832,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/infocmp.1m b/usr/src/man/man1m/infocmp.1m
index 343d5080c8..2e0b81abc0 100644
--- a/usr/src/man/man1m/infocmp.1m
+++ b/usr/src/man/man1m/infocmp.1m
@@ -4,14 +4,14 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH infocmp 1M "5 Jul 1990" "SunOS 5.11" "System Administration Commands"
+.TH INFOCMP 1M "Jul 5, 1990"
 .SH NAME
 infocmp \- compare or print out terminfo descriptions
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/bin/infocmp\fR [\fB-d\fR] [\fB-c\fR] [\fB-n\fR] [\fB-I\fR] [\fB-L\fR] [\fB-C\fR] [\fB-r\fR] [\fB-u\fR] 
-     [\fB-s\fR | d | i | l | c] [\fB-v\fR] [\fB-V\fR] [\fB-1\fR] [\fB-w\fR \fIwidth\fR] 
+\fB/usr/bin/infocmp\fR [\fB-d\fR] [\fB-c\fR] [\fB-n\fR] [\fB-I\fR] [\fB-L\fR] [\fB-C\fR] [\fB-r\fR] [\fB-u\fR]
+     [\fB-s\fR | d | i | l | c] [\fB-v\fR] [\fB-V\fR] [\fB-1\fR] [\fB-w\fR \fIwidth\fR]
      [\fB-A\fR \fI directory\fR] [\fB-B\fR \fIdirectory\fR] [\fItermname\fR]...
 .fi
 
@@ -38,12 +38,10 @@ the terminals, the value returned will depend on the type of the capability:
 \fINULL\fR for string variables.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 6n
-.rt  
 Produce a list of each capability that is different between two entries. This
 option is useful to show the difference between two entries, created by
 different people, for the same or similar terminals.
@@ -51,12 +49,10 @@ different people, for the same or similar terminals.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 6n
-.rt  
 Produce a list of each capability that is common between two entries.
 Capabilities that are not set are ignored. This option can be used as a quick
 check to see if the \fB-u\fR option is worth using.
@@ -64,12 +60,10 @@ check to see if the \fB-u\fR option is worth using.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 6n
-.rt  
 Produce a list of each capability that is in neither entry. If no
 \fItermname\fR is given, the environment variable \fBTERM\fR will be used for
 both of the \fItermname\fRs. This can be used as a quick check to see if
@@ -82,34 +76,28 @@ The \fB-I\fR \fB,\fR \fB-L\fR \fB,\fR and \fB-C\fR options will produce a
 source listing for each terminal named.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR\fR
 .ad
 .RS 6n
-.rt  
 Use the \fBterminfo\fR names.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR\fR
 .ad
 .RS 6n
-.rt  
 Use the long C variable name listed in < \fBterm.h\fR >.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR\fR
 .ad
 .RS 6n
-.rt  
 Use the \fBtermcap\fR names. The source produced by the \fB-C\fR option may be
 used directly as a \fBtermcap\fR entry, but not all of the parameterized
 strings may be changed to the \fBtermcap\fR format. \fBinfocmp\fR will attempt
@@ -120,12 +108,10 @@ by hand.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 6n
-.rt  
 When using \fB-C\fR \fB,\fR put out all capabilities in \fBtermcap\fR form.
 .RE
 
@@ -174,12 +160,10 @@ equivalents, and some terminal types which commonly have such sequences, are:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
 .RS 6n
-.rt  
 Produce a \fBterminfo\fR source description of the first terminal
 \fItermname\fR which is relative to the sum of the descriptions given by the
 entries for the other terminals' \fItermname\fRs. It does this by analyzing the
@@ -221,54 +205,44 @@ the compilation time, is specifying superfluous  \fBuse=\fR fields.
 \fBinfocmp\fR will flag any superfluous  \fBuse=\fR fields.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 11n
-.rt  
 Sorts the fields within each type according to the argument below:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBd\fR\fR
 .ad
 .RS 5n
-.rt  
 Leave fields in the order that they are stored in the \fBterminfo\fR database.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBi\fR\fR
 .ad
 .RS 5n
-.rt  
 Sort by \fBterminfo\fR name.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBl\fR\fR
 .ad
 .RS 5n
-.rt  
 Sort by the long C variable name.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBc\fR\fR
 .ad
 .RS 5n
-.rt  
 Sort by the \fBtermcap\fR name.
 .RE
 
@@ -280,46 +254,38 @@ name or the long C variable name, respectively.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 11n
-.rt  
 Print out tracing information on standard error as the program runs.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
 .RS 11n
-.rt  
 Print out the version of the program in use on standard error and exit.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\(mi1\fR\fR
 .ad
 .RS 11n
-.rt  
 Print the fields one to a line. Otherwise, the fields are printed several to a
 line to a maximum width of 60 characters.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR\fIwidth\fR\fR
 .ad
 .RS 11n
-.rt  
 Changes the output to \fIwidth\fR characters.
 .RE
 
@@ -332,23 +298,19 @@ defined, or the terminal is not found in that location, the system
 options \fB-A\fR and \fB-B\fR may be used to override this location.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR \fIdirectory\fR\fR
 .ad
 .RS 16n
-.rt  
 Set \fB\fR\fBTERM\fR\fBINFO \fR for the first \fItermname\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-B\fR \fIdirectory\fR\fR
 .ad
 .RS 16n
-.rt  
 Set \fB\fR\fBTERM\fR\fBINFO \fR for the other \fItermname\fRs. With this, it is
 possible to compare descriptions for a terminal with the same name located in
 two different databases. This is useful for comparing descriptions for the same
@@ -358,7 +320,6 @@ terminal created by different people.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/share/lib/terminfo/?/*\fR\fR
 .ad
diff --git a/usr/src/man/man1m/init.1m b/usr/src/man/man1m/init.1m
index d2e1338c2f..4c95a9571c 100644
--- a/usr/src/man/man1m/init.1m
+++ b/usr/src/man/man1m/init.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH init 1M "2 Sep 2009" "SunOS 5.11" "System Administration Commands"
+.TH INIT 1M "Sep 2, 2009"
 .SH NAME
 init, telinit \- process control initialization
 .SH SYNOPSIS
@@ -58,7 +58,6 @@ page.) \fBinit\fR then looks in \fB/etc/inittab\fR for the \fBinitdefault\fR
 entry (see \fBinittab\fR(4)). If the \fBinitdefault\fR entry:
 .sp
 .ne 2
-.mk
 .na
 \fBexists\fR
 .ad
@@ -71,7 +70,6 @@ specified for \fBsvc.startd\fR(1M).
 
 .sp
 .ne 2
-.mk
 .na
 \fBdoes not exist\fR
 .ad
@@ -88,7 +86,6 @@ The \fBinitdefault\fR entry in \fB/etc/inittab\fR corresponds to the following
 run levels:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBS\fR or \fBs\fR\fR
 .ad
@@ -104,7 +101,6 @@ single-user state if \fB/etc/inittab\fR does not exist.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0-6\fR\fR
 .ad
@@ -205,7 +201,6 @@ If there are no entries for the \fBinit\fR service, then the entries for the
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -216,7 +211,6 @@ Go into firmware.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
@@ -233,7 +227,6 @@ milestone to svc:/milestone/single-user:default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
@@ -249,7 +242,6 @@ milestone to svc:/milestone/multi-user:default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
@@ -263,7 +255,6 @@ milestone to svc:/milestone/multi-user-server:default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR\fR
 .ad
@@ -276,7 +267,6 @@ used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB5\fR\fR
 .ad
@@ -288,7 +278,6 @@ remove power, if possible.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB6\fR\fR
 .ad
@@ -304,7 +293,6 @@ default. When the \fBconfig/fastreboot_default\fR property is set to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBa\fR,\fBb\fR,\fBc\fR\fR
 .ad
@@ -317,7 +305,6 @@ certain commands, but which do not cause the current run level to change.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBQ\fR,\fBq\fR\fR
 .ad
@@ -328,7 +315,6 @@ Re-examine \fB/etc/inittab\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBS\fR, \fBs\fR\fR
 .ad
@@ -355,7 +341,6 @@ milestone to svc:/milestone/single-user:default.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/console\fR\fR
 .ad
@@ -366,7 +351,6 @@ System console device.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/init\fR\fR
 .ad
@@ -377,7 +361,6 @@ timezone variable, \fBTZ\fR, you might specify \fBTZ=US/Pacific\fR. The
 variables are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTZ\fR\fR
 .ad
@@ -391,7 +374,6 @@ Refer to the \fBTIMEZONE\fR(4) man page before changing this setting.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCMASK\fR\fR
 .ad
@@ -406,7 +388,6 @@ inherits from the kernel. Note that \fBinit\fR always attempts to apply a
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLC_CTYPE\fR\fR
 .ad
@@ -417,7 +398,6 @@ Character characterization information
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLC_MESSAGES\fR\fR
 .ad
@@ -428,7 +408,6 @@ Message translation
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLC_MONETARY\fR\fR
 .ad
@@ -439,7 +418,6 @@ Monetary formatting information
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLC_NUMERIC\fR\fR
 .ad
@@ -450,7 +428,6 @@ Numeric formatting information
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLC_TIME\fR\fR
 .ad
@@ -461,7 +438,6 @@ Time formatting information
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLC_ALL\fR\fR
 .ad
@@ -472,7 +448,6 @@ If set, all other \fBLC_*\fR environmental variables take-on this value.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLANG\fR\fR
 .ad
@@ -486,7 +461,6 @@ value of \fBLANG\fR is used for that particular environmental variable.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inittab\fR\fR
 .ad
@@ -497,7 +471,6 @@ Controls process dispatching by \fBinit\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ioctl.syscon\fR\fR
 .ad
@@ -509,7 +482,6 @@ entered.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/svc/volatile/init.state\fR\fR
 .ad
@@ -520,7 +492,6 @@ entered.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/utmpx\fR\fR
 .ad
@@ -531,7 +502,6 @@ User access and administration information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/wtmpx\fR\fR
 .ad
@@ -542,7 +512,6 @@ History of user access and administration information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB/var/run/initpipe\fR
 .ad
diff --git a/usr/src/man/man1m/inityp2l.1m b/usr/src/man/man1m/inityp2l.1m
index c30def94ce..5869ceace4 100644
--- a/usr/src/man/man1m/inityp2l.1m
+++ b/usr/src/man/man1m/inityp2l.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH inityp2l 1M "10 Apr 2003" "SunOS 5.11" "System Administration Commands"
+.TH INITYP2L 1M "Apr 10, 2003"
 .SH NAME
 inityp2l \- create NIS (YP) to LDAP configuration files
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/netsvc/yp/inityp2l\fR [\fB-m\fR \fImapping_file_name\fR] 
+\fB/usr/lib/netsvc/yp/inityp2l\fR [\fB-m\fR \fImapping_file_name\fR]
      [\fB-c\fR \fIconfig_file_name\fR]
 .fi
 
@@ -61,24 +61,20 @@ standard text editor.
 \fBinityp2l\fR supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 6n
-.rt  
 Specify the name of the generated \fBypserv\fR file. The default location is
 described in .
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
 .RS 6n
-.rt  
 Specify the name of the generated \fBNISLDAPmapping\fR file. The default is
 described in .
 .RE
@@ -86,35 +82,29 @@ described in .
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/yp\fR \fR
 .ad
 .RS 26n
-.rt  
 The directory to be searched for candidate domains (\fB/var/yp/*\fR) and NIS
 maps (\fB/var/yp/*/*\fR)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/yp/NISLDAPmapping\fR\fR
 .ad
 .RS 26n
-.rt  
 The default location for the generated \fBNISLDAPmapping\fR file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/ypserv\fR\fR
 .ad
 .RS 26n
-.rt  
 The default location for the generated \fBypserv\fR file
 .RE
 
@@ -126,13 +116,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityObsolete
+Interface Stability	Obsolete
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/install.1m b/usr/src/man/man1m/install.1m
index 4e1164ab90..f7494d2ada 100644
--- a/usr/src/man/man1m/install.1m
+++ b/usr/src/man/man1m/install.1m
@@ -3,37 +3,37 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH install 1M "3 Nov 2005" "SunOS 5.11" "System Administration Commands"
+.TH INSTALL 1M "Nov 3, 2005"
 .SH NAME
 install \- install commands
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/install\fR \fB-c\fR \fIdira\fR [\fB-m\fR \fImode\fR] [\fB-u\fR \fIuser\fR] [\fB-g\fR \fIgroup\fR] 
+\fB/usr/sbin/install\fR \fB-c\fR \fIdira\fR [\fB-m\fR \fImode\fR] [\fB-u\fR \fIuser\fR] [\fB-g\fR \fIgroup\fR]
      [\fB-o\fR] [\fB-s\fR] \fIfile\fR
 .fi
 
 .LP
 .nf
-\fB/usr/sbin/install\fR \fB-f\fR \fIdirb\fR [\fB-m\fR \fImode\fR] [\fB-u\fR \fIuser\fR] [\fB-g\fR \fIgroup\fR] 
+\fB/usr/sbin/install\fR \fB-f\fR \fIdirb\fR [\fB-m\fR \fImode\fR] [\fB-u\fR \fIuser\fR] [\fB-g\fR \fIgroup\fR]
      [\fB-o\fR] [\fB-s\fR] \fIfile\fR
 .fi
 
 .LP
 .nf
-\fB/usr/sbin/install\fR \fB-n\fR \fIdirc\fR [\fB-m\fR \fImode\fR] [\fB-u\fR \fIuser\fR] [\fB-g\fR \fIgroup\fR] 
+\fB/usr/sbin/install\fR \fB-n\fR \fIdirc\fR [\fB-m\fR \fImode\fR] [\fB-u\fR \fIuser\fR] [\fB-g\fR \fIgroup\fR]
      [\fB-o\fR] [\fB-s\fR] \fIfile\fR
 .fi
 
 .LP
 .nf
-\fB/usr/sbin/install\fR \fB-d\fR | \fB-i\fR [\fB-m\fR \fImode\fR] [\fB-u\fR \fIuser\fR] [\fB-g\fR \fIgroup\fR] 
+\fB/usr/sbin/install\fR \fB-d\fR | \fB-i\fR [\fB-m\fR \fImode\fR] [\fB-u\fR \fIuser\fR] [\fB-g\fR \fIgroup\fR]
      [\fB-o\fR] [\fB-s\fR] \fIdirx\fR...
 .fi
 
 .LP
 .nf
-\fB/usr/sbin/install\fR [\fB-m\fR \fImode\fR] [\fB-u\fR \fIuser\fR] [\fB-g\fR \fIgroup\fR] [\fB-o\fR] [\fB-s\fR] \fIfile\fR 
+\fB/usr/sbin/install\fR [\fB-m\fR \fImode\fR] [\fB-u\fR \fIuser\fR] [\fB-g\fR \fIgroup\fR] [\fB-o\fR] [\fB-s\fR] \fIfile\fR
      [\fIdirx\fR]...
 .fi
 
@@ -108,12 +108,10 @@ higher degree of compatibility with other Unix versions, use
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIdira\fR\fR
 .ad
 .RS 12n
-.rt  
 Install \fBfile\fR in the directory specified by \fIdira\fR, if \fBfile\fR does
 not yet exist. If it is found, \fBinstall\fR issues a message saying that the
 file already exists, and exits without overwriting it.
@@ -121,12 +119,10 @@ file already exists, and exits without overwriting it.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIdirb\fR\fR
 .ad
 .RS 12n
-.rt  
 Force \fBfile\fR to be installed in given directory, even if the file already
 exists. If the file being installed does not already exist, the mode and owner
 of the new file is set to \fB755\fR and \fBbin\fR \fB,\fR respectively. If the
@@ -135,12 +131,10 @@ file already exists, the mode and owner is that of the already existing file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fIdirc\fR\fR
 .ad
 .RS 12n
-.rt  
 If \fBfile\fR is not found in any of the searched directories, it is put in the
 directory specified in \fIdirc\fR. The mode and owner of the new file is set to
 \fB755\fR and \fBbin\fR, respectively.
@@ -148,12 +142,10 @@ directory specified in \fIdirc\fR. The mode and owner of the new file is set to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 12n
-.rt  
 Create a directory. Missing parent directories are created as required as in
 \fBmkdir \fR\fB-p\fR. If the directory already exists, the owner, group and
 mode is set to the values given on the command line.
@@ -161,59 +153,49 @@ mode is set to the values given on the command line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 12n
-.rt  
 Ignore default directory list, searching only through the given directories
 (\fIdirx\fR .\|.\|.).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fImode\fR\fR
 .ad
 .RS 12n
-.rt  
 The mode of the new file is set to \fImode\fR. Set to \fB0755\fR by default.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIuser\fR\fR
 .ad
 .RS 12n
-.rt  
 The owner of the new file is set to \fIuser\fR. Only available to the
 super-user. Set to \fBbin\fR by default.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR \fIgroup\fR\fR
 .ad
 .RS 12n
-.rt  
 The group id of the new file is set to \fIgroup\fR. Only available to the
 super-user. Set to \fBbin\fR by default.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 12n
-.rt  
 If \fBfile\fR is found, save the ``found'' file by copying it to
 \fBOLD\fR\fBfile\fR in the directory in which it was found. This option is
 useful when installing a frequently used file such as \fB/bin/sh\fR or
@@ -222,12 +204,10 @@ useful when installing a frequently used file such as \fB/bin/sh\fR or
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 12n
-.rt  
 Suppress printing of messages other than error messages.
 .RE
 
diff --git a/usr/src/man/man1m/installf.1m b/usr/src/man/man1m/installf.1m
index ba88cfba54..5adc8fed43 100644
--- a/usr/src/man/man1m/installf.1m
+++ b/usr/src/man/man1m/installf.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH installf 1M "30 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH INSTALLF 1M "Oct 30, 2007"
 .SH NAME
 installf \- add a file to the software installation database
 .SH SYNOPSIS
 .LP
 .nf
-\fBinstallf\fR [\fB-c\fR \fIclass\fR] [ [\fB-M\fR] \fB-R\fR \fIroot_path\fR] [\fB-V\fR \fIfs_file\fR] \fIpkginst\fR \fIpathname\fR 
+\fBinstallf\fR [\fB-c\fR \fIclass\fR] [ [\fB-M\fR] \fB-R\fR \fIroot_path\fR] [\fB-V\fR \fIfs_file\fR] \fIpkginst\fR \fIpathname\fR
      [\fIftype\fR [\fImajor\fR \fIminor\fR] [\fImode\fR \fIowner\fR \fIgroup\fR]]
 .fi
 
@@ -59,36 +59,30 @@ datastream of  up to 4 GB.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIclass\fR\fR
 .ad
 .RS 16n
-.rt  
 Class to which installed objects should be associated. Default class is
 \fBnone\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 16n
-.rt  
 Indicates that installation is complete. This option is used with the final
 invocation of \fBinstallf\fR (for all files of a given class).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR\fR
 .ad
 .RS 16n
-.rt  
 Instruct \fBinstallf\fR not to use the \fB$\fR\fIroot_path\fR\fB/etc/vfstab\fR
 file for determining the client's mount points. This option assumes the mount
 points are correct on the server and it behaves consistently with Solaris 2.5
@@ -97,12 +91,10 @@ and earlier releases.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-R\fR \fIroot_path\fR\fR
 .ad
 .RS 16n
-.rt  
 Define the full path name of a directory to use as the \fIroot_path\fR. All
 files, including package system information files, are relocated to a directory
 tree starting in the specified \fIroot_path\fR. The \fIroot_path\fR can be
@@ -126,12 +118,10 @@ zone's file system. See \fBzones\fR(5).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR \fIfs_file\fR\fR
 .ad
 .RS 16n
-.rt  
 Specify an alternative \fIfs_file\fR to map the client's file systems. For
 example, used in situations where the \fB$\fR\fIroot_path\fR\fB/etc/vfstab\fR
 file is non-existent or unreliable.
@@ -140,143 +130,117 @@ file is non-existent or unreliable.
 .SH OPERANDS
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpkginst\fR\fR
 .ad
 .RS 12n
-.rt  
 Name of package instance with which the pathname should be associated.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpathname\fR\fR
 .ad
 .RS 12n
-.rt  
 Pathname that is being created or modified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIftype\fR\fR
 .ad
 .RS 12n
-.rt  
 A one-character field that indicates the file type. Possible file types
 include:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBb\fR\fR
 .ad
 .RS 5n
-.rt  
 block special device
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBc\fR\fR
 .ad
 .RS 5n
-.rt  
 character special device
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBd\fR\fR
 .ad
 .RS 5n
-.rt  
 directory
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBe\fR\fR
 .ad
 .RS 5n
-.rt  
 a file to be edited upon installation or removal
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBf\fR\fR
 .ad
 .RS 5n
-.rt  
 a standard executable or data file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBl\fR\fR
 .ad
 .RS 5n
-.rt  
 linked file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBp\fR\fR
 .ad
 .RS 5n
-.rt  
 named pipe
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBs\fR\fR
 .ad
 .RS 5n
-.rt  
 symbolic link
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBv\fR\fR
 .ad
 .RS 5n
-.rt  
 volatile file (one whose contents are expected to change)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBx\fR\fR
 .ad
 .RS 5n
-.rt  
 an exclusive directory
 .RE
 
@@ -284,36 +248,30 @@ an exclusive directory
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fImajor\fR\fR
 .ad
 .RS 12n
-.rt  
 The major device number. The field is only specified for block or character
 special devices.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIminor\fR\fR
 .ad
 .RS 12n
-.rt  
 The minor device number. The field is only specified for block or character
 special devices.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fImode\fR\fR
 .ad
 .RS 12n
-.rt  
 The octal mode of the file (for example, 0664). A question mark (\fB?\fR)
 indicates that the mode will be left unchanged, implying that the file already
 exists on the target machine. This field is not used for linked or symbolically
@@ -322,12 +280,10 @@ linked files.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIowner\fR\fR
 .ad
 .RS 12n
-.rt  
 The owner of the file (for example, \fBbin\fR or \fBroot\fR). The field is
 limited to 14 characters in length. A question mark (\fB?\fR) indicates that
 the owner will be left unchanged, implying that the file already exists on the
@@ -336,12 +292,10 @@ target machine. This field is not used for linked or symbolically linked files.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIgroup\fR\fR
 .ad
 .RS 12n
-.rt  
 The group to which the file belongs (for example, \fBbin\fR or \fBsys\fR). The
 field is limited to 14 characters in length. A question mark (\fB?\fR)
 indicates that the group will be left unchanged, implying that the file already
@@ -393,12 +347,10 @@ variable is set when \fBpkgadd\fR(1M) or \fBpkgrm\fR(1M) is invoked with the
 \fB-R\fR option.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPKG_INSTALL_ROOT\fR\fR
 .ad
 .RS 20n
-.rt  
 If present, defines the full path name of a directory to use as the system's
 \fBPKG_INSTALL_ROOT\fR path. All product and package information files are then
 looked for in the directory tree, starting with the specified
@@ -409,23 +361,19 @@ is used.
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful operation.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -448,13 +396,12 @@ defined:
 
 .sp
 .TS
-tab() box;
-lw(2.75i) lw(2.75i) 
-lw(2.75i) lw(2.75i) 
-.
-\fIftype\fRRequired Fields
-\fBp\fR, \fBx\fR, \fBd\fR, \fBf\fR, \fBv\fR, or \fBe\fR\fBmode  owner  group\fR
-\fBc\fR or \fBb\fR\fBmajor  minor mode  owner  group\fR
+box;
+l l
+l l .
+\fIftype\fR	Required Fields
+\fBp\fR, \fBx\fR, \fBd\fR, \fBf\fR, \fBv\fR, or \fBe\fR	\fBmode  owner  group\fR
+\fBc\fR or \fBb\fR	\fBmajor  minor mode  owner  group\fR
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/installgrub.1m b/usr/src/man/man1m/installgrub.1m
index 3a717055b7..57aaab893c 100644
--- a/usr/src/man/man1m/installgrub.1m
+++ b/usr/src/man/man1m/installgrub.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH installgrub 1M "2 Jul 2009" "SunOS 5.11" "System Administration Commands"
+.TH INSTALLGRUB 1M "Jul 2, 2009"
 .SH NAME
 installgrub \- install GRUB in a disk partition or a floppy
 .SH SYNOPSIS
@@ -28,23 +28,19 @@ the stage 1 file on the master boot sector of the disk.
 The \fBinstallgrub\fR command accepts the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 6n
-.rt  
 Suppresses interaction when overwriting the master boot sector.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
 .RS 6n
-.rt  
 Installs GRUB \fIstage1\fR on the master boot sector interactively. You must
 use this option if Solaris is installed on an extended partition.
 .RE
@@ -55,34 +51,28 @@ use this option if Solaris is installed on an extended partition.
 The \fBinstallgrub\fR command accepts the following operands:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIstage1\fR\fR
 .ad
 .RS 14n
-.rt  
 The name of the GRUB stage 1 file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIstage2\fR\fR
 .ad
 .RS 14n
-.rt  
 The name of the GRUB stage 2 file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIraw-device\fR\fR
 .ad
 .RS 14n
-.rt  
 The name of the device onto which GRUB code is to be installed. It must be a
 character device that is readable and writable. For disk devices, specify the
 slice where the GRUB menu file is located. (For Solaris it is the root slice.)
@@ -126,12 +116,10 @@ example# mount -F pcfs /dev/diskette /mnt
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/boot/grub\fR\fR
 .ad
 .RS 14n
-.rt  
 Directory where GRUB files reside.
 .RE
 
@@ -143,13 +131,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/intrd.1m b/usr/src/man/man1m/intrd.1m
index 76b1ee59ca..efeb8d2944 100644
--- a/usr/src/man/man1m/intrd.1m
+++ b/usr/src/man/man1m/intrd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH intrd 1M "21 Jun 2006" "SunOS 5.11" "System Administration Commands"
+.TH INTRD 1M "Jun 21, 2006"
 .SH NAME
 intrd \- interrupt distribution daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/intrd\fR 
+\fB/usr/lib/intrd\fR
 .fi
 
 .SH DESCRIPTION
@@ -35,13 +35,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface Stability Unstable 
+Interface Stability 	Unstable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/intrstat.1m b/usr/src/man/man1m/intrstat.1m
index 860ae88797..35494f2d47 100644
--- a/usr/src/man/man1m/intrstat.1m
+++ b/usr/src/man/man1m/intrstat.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH intrstat 1M "16 Jun 2009" "SunOS 5.11" "System Administration Commands"
+.TH INTRSTAT 1M "Jun 16, 2009"
 .SH NAME
 intrstat \- report interrupt statistics
 .SH SYNOPSIS
@@ -59,7 +59,6 @@ other users to permit them to run \fBintrstat\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcpulist\fR\fR
 .ad
@@ -74,7 +73,6 @@ IDs or processor ID ranges (for example, \fB4,5,6\fR or \fB4,6-8\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR \fIprocessor_set_id\fR\fR
 .ad
@@ -92,7 +90,6 @@ be specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fBu\fR | \fBd\fR\fR
 .ad
@@ -107,7 +104,6 @@ time. See \fBtime\fR(2). Specify \fBd\fR for standard date format. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fIopt\fR[=\fIval\fR]\fR
 .ad
@@ -125,7 +121,6 @@ the option name and value with an equal sign (\fB=\fR)
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcount\fR\fR
 .ad
@@ -136,7 +131,6 @@ Indicates the number of intervals to execute before exiting.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIinterval\fR\fR
 .ad
@@ -195,13 +189,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/iostat.1m b/usr/src/man/man1m/iostat.1m
index ad954aba89..e45ceff5e3 100644
--- a/usr/src/man/man1m/iostat.1m
+++ b/usr/src/man/man1m/iostat.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH iostat 1M "23 Mar 2009" "SunOS 5.11" "System Administration Commands"
+.TH IOSTAT 1M "Mar 23, 2009"
 .SH NAME
 iostat \- report I/O statistics
 .SH SYNOPSIS
@@ -67,45 +67,37 @@ For more general system statistics, use \fBsar\fR(1), \fBsar\fR(1M), or
 The output of the \fBiostat\fR utility includes the following information.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdevice\fR\fR
 .ad
 .RS 10n
-.rt  
 name of the disk
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBr/s\fR\fR
 .ad
 .RS 10n
-.rt  
 reads per second
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBw/s\fR\fR
 .ad
 .RS 10n
-.rt  
 writes per second
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBkr/s\fR\fR
 .ad
 .RS 10n
-.rt  
 kilobytes read per second
 .sp
 The average I/O size during the interval can be computed from \fBkr/s\fR
@@ -114,12 +106,10 @@ divided by \fBr/s\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBkw/s\fR\fR
 .ad
 .RS 10n
-.rt  
 kilobytes written per second
 .sp
 The average I/O size during the interval can be computed from \fBkw/s\fR
@@ -128,12 +118,10 @@ divided by \fBw/s\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwait\fR\fR
 .ad
 .RS 10n
-.rt  
 average number of transactions waiting for service (queue length)
 .sp
 This is the number of I/O operations held in the device driver queue waiting
@@ -142,12 +130,10 @@ for acceptance by the device.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBactv\fR\fR
 .ad
 .RS 10n
-.rt  
 average number of transactions actively being serviced (removed from the queue
 but not yet completed)
 .sp
@@ -157,12 +143,10 @@ device.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsvc_t\fR\fR
 .ad
 .RS 10n
-.rt  
 average response time of transactions, in milliseconds
 .sp
 The \fBsvc_t\fR output reports the overall \fBresponse\fR time, rather than the
@@ -176,56 +160,46 @@ Service time is also shown with the \fB-x\fR option and appears in the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%w\fR\fR
 .ad
 .RS 10n
-.rt  
 percent of time there are transactions waiting for service (queue non-empty)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%b\fR\fR
 .ad
 .RS 10n
-.rt  
 percent of time the disk is busy (transactions in progress)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwsvc_t\fR\fR
 .ad
 .RS 10n
-.rt  
 average service time in wait queue, in milliseconds
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBasvc_t\fR\fR
 .ad
 .RS 10n
-.rt  
 average service time of active transactions, in milliseconds
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwt\fR\fR
 .ad
 .RS 10n
-.rt  
 the I/O wait time is no longer calculated as a percentage of \fBCPU\fR time,
 and this statistic will always return zero.
 .RE
@@ -236,12 +210,10 @@ and this statistic will always return zero.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 12n
-.rt  
 Report the percentage of time the system has spent in user mode, in system
 mode, waiting for \fBI/O,\fR and idling. See the NOTES section for more
 information.
@@ -249,71 +221,59 @@ information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR\fR
 .ad
 .RS 12n
-.rt  
 When the \fB-x\fR option is also selected, report extended disk statistics
 aggregated by \fIcontroller id\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 12n
-.rt  
 For each disk, report the number of kilobytes transferred per second, the
 number of transfers per second, and the average service time in milliseconds.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
 .RS 12n
-.rt  
 For each disk, report the reads per second, writes per second, and percentage
 disk utilization.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
 .RS 12n
-.rt  
 Display device error summary statistics. The total errors, hard errors, soft
 errors, and transport errors are displayed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-E\fR\fR
 .ad
 .RS 12n
-.rt  
 Display all device error statistics.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 12n
-.rt  
 In \fB-E\fR output, display the \fBDevice ID\fR instead of the \fBSerial No\fR.
 The \fBDevice Id\fR is a unique identifier registered by a driver through
 \fBddi_devid_register\fR(9F).
@@ -321,23 +281,19 @@ The \fBDevice Id\fR is a unique identifier registered by a driver through
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR\fR
 .ad
 .RS 12n
-.rt  
 Report the counts in each interval, rather than rates (where applicable).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIn\fR\fR
 .ad
 .RS 12n
-.rt  
 Limit the number of disks included in the report to \fIn\fR; the disk limit
 defaults to 4 for \fB-d\fR and \fB-D\fR, and unlimited for \fB-x\fR. Note:
 disks explicitly requested (see \fIdisk\fR below) are not subject to this disk
@@ -346,12 +302,10 @@ limit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
 .RS 12n
-.rt  
 Report file system mount points. This option is most useful if the \fB-P\fR or
 \fB-p\fR option is also specified or used in conjunction with \fB-Xn\fR or
 \fB-en\fR. The \fB-m\fR option is useful only if the mount point is actually
@@ -361,23 +315,19 @@ listed in the output. This option can only be used in conjunction with the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR\fR
 .ad
 .RS 12n
-.rt  
 Display data throughput in \fBMB\fR/sec instead of KB/sec.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 12n
-.rt  
 Display names in descriptive format. For example, \fBcXtYdZ\fR, \fBrmt/N\fR,
 \fBserver:/export/path\fR.
 .sp
@@ -391,68 +341,56 @@ Name appears in the \fBt\fR field.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 12n
-.rt  
 For each disk, report per-partition statistics in addition to per-device
 statistics.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR\fR
 .ad
 .RS 12n
-.rt  
 For each disk, report per-partition statistics only, no per-device statistics.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 12n
-.rt  
 Display data in a comma-separated format.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 12n
-.rt  
 Suppress messages related to \fBstate changes\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
 .RS 12n
-.rt  
 Report the number of characters read and written to terminals per second.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR u | d\fR
 .ad
 .RS 12n
-.rt  
 Display a time stamp.
 .sp
 Specify \fBu\fR for a printed representation of the internal representation of
@@ -462,24 +400,20 @@ time. See \fBtime\fR(2). Specify \fBd\fR for standard date format. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-X\fR\fR
 .ad
 .RS 12n
-.rt  
 For disks under \fBscsi_vhci\fR(7D) control, in addition to disk \fIlun\fR
 statistics, also report statistics for \fIlun\fR.\fIcontroller\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
 .RS 12n
-.rt  
 Report extended disk statistics. By default, disks are identified by instance
 names such as \fBssd23\fR or \fBmd301\fR. Combining the \fBx\fR option with the
 \fB-n\fR option causes disk names to display in the \fBcXtYdZsN\fR format, more
@@ -493,12 +427,10 @@ is implied.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Y\fR\fR
 .ad
 .RS 12n
-.rt  
 For disks under \fBscsi_vhci\fR(7D) control, in addition to disk \fIlun\fR
 statistics, also report statistics for \fIlun\fR.\fItargetport\fR and
 \fIlun\fR.\fItargetport\fR.\fIcontroller\fR.
@@ -515,12 +447,10 @@ is implied.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-z\fR\fR
 .ad
 .RS 12n
-.rt  
 Do not print lines whose underlying data values are all zeros.
 .RE
 
@@ -534,23 +464,19 @@ determining whether disk I/O problems exist and for identifying problems.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcount\fR\fR
 .ad
 .RS 12n
-.rt  
 Display only \fIcount\fR reports.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdisk\fR\fR
 .ad
 .RS 12n
-.rt  
 Explicitly specify the disks to be reported; in addition to any explicit disks,
 any active disks up to the disk limit (see \fB-l\fR above) will also be
 reported.
@@ -558,12 +484,10 @@ reported.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIinterval\fR\fR
 .ad
 .RS 12n
-.rt  
 Report once each \fIinterval\fR seconds.
 .RE
 
@@ -588,7 +512,7 @@ Mon Nov 24 14:58:36 2003
     cpu
  us sy wt id
  14 31  0 20
-                    extended device statistics                
+                    extended device statistics
   r/s    w/s    kr/s      kw wait  actv wsvc_t asvc_t  %w  %b device
   3.8   29.9   145.8    44.0  0.0   0.2    0.1    6.4   0   5     c0
 666.3  814.8 12577.6 17591.1 91.3  82.3   61.6   55.6   0   2    c12
@@ -598,7 +522,7 @@ Mon Nov 24 14:58:41 2003
     cpu
  us sy wt id
  11 31  0 22
-                    extended device statistics                
+                    extended device statistics
   r/s    w/s    kr/s      kw wait  actv wsvc_t asvc_t  %w  %b device
   0.8   41.0     5.2    20.5 0.0    0.2    0.2    4.4   0   6     c0
 565.3  581.7  8573.2 10458.9 0.0   26.6    0.0   23.2   0   3    c12
@@ -624,18 +548,18 @@ example% \fBiostat\fR \fB-x\fR \fBtc 5 2\fR
                   extended device statistics        tty         cpu
 device r/s  w/s kr/s  kw/s wait actv svc_t %w  %b  tin tout  us sy wt id
 sd0    0.4  0.3 10.4   8.0  0.0  0.0  36.9  0   1    0   10   0  0  0 99
-sd1    0.0  0.0  0.3   0.4  0.0  0.0  35.0  0   0 
-sd6    0.0  0.0  0.0   0.0  0.0  0.0   0.0  0   0 
-nfs1   0.0  0.0  0.0   0.0  0.0  0.0   0.0  0   0 
-nfs2   0.0  0.0  0.0   0.1  0.0  0.0  35.6  0   0 
+sd1    0.0  0.0  0.3   0.4  0.0  0.0  35.0  0   0
+sd6    0.0  0.0  0.0   0.0  0.0  0.0   0.0  0   0
+nfs1   0.0  0.0  0.0   0.0  0.0  0.0   0.0  0   0
+nfs2   0.0  0.0  0.0   0.1  0.0  0.0  35.6  0   0
             extended device statistics              tty         cpu
 device r/s  w/s  kr/s  kw/s wait actv svc_t %w  %b tin tout  us sy wt id
 sd0    0.0  0.0  0.0   0.0  0.0  0.0  0.0   0   0   0  155   0  0  0 100
-sd1    0.0  0.0  0.0   0.0  0.0  0.0  0.0   0   0 
-sd6    0.0  0.0  0.0   0.0  0.0  0.0  0.0   0   0 
-nfs1   0.0  0.0  0.0   0.0  0.0  0.0  0.0   0   0 
-nfs2   0.0  0.0  0.0   0.0  0.0  0.0  0.0   0   0 
-                             
+sd1    0.0  0.0  0.0   0.0  0.0  0.0  0.0   0   0
+sd6    0.0  0.0  0.0   0.0  0.0  0.0  0.0   0   0
+nfs1   0.0  0.0  0.0   0.0  0.0  0.0  0.0   0   0
+nfs2   0.0  0.0  0.0   0.0  0.0  0.0  0.0   0   0
+
 .fi
 .in -2
 .sp
@@ -653,7 +577,7 @@ identified by controller names.
 .nf
 example% \fBiostat -xnp\fR
 
-                extended device statistics              
+                extended device statistics
 r/s  w/s  kr/s kw/s wait actv wsvc_t asvc_t %w %b device
 0.4  0.3  10.4  7.9  0.0  0.0    0.0   36.9  0  1 c0t0d0
 0.3  0.3   9.0  7.3  0.0  0.0    0.0   37.2  0  1 c0t0d0s0
@@ -712,13 +636,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/ipaddrsel.1m b/usr/src/man/man1m/ipaddrsel.1m
index a5883a0ee1..2420789fd3 100644
--- a/usr/src/man/man1m/ipaddrsel.1m
+++ b/usr/src/man/man1m/ipaddrsel.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ipaddrsel 1M "6 Feb 2006" "SunOS 5.11" "System Administration Commands"
+.TH IPADDRSEL 1M "Feb 6, 2006"
 .SH NAME
 ipaddrsel \- configure IPv6 default address selection
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/ipaddrsel\fR 
+\fB/usr/sbin/ipaddrsel\fR
 .fi
 
 .LP
@@ -107,24 +107,20 @@ all possible addresses match a policy.
 The \fBippadrsel\fR utility supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfile\fR\fR
 .ad
 .RS 11n
-.rt  
 Replace the address selection policy table with the policy specified in the
 \fIfile\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 11n
-.rt  
 Revert the kernel's address selection policy table back to the default table.
 Invoking \fBipaddrsel\fR in this way only changes the currently running
 kernel's policy table, and does not alter the configuration file
@@ -256,23 +252,19 @@ all global prefixes are assigned to that physical interface.
 \fBipaddrsel\fR returns the following exit values:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 \fBipaddrsel\fR successfully completed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred. If a failure is encountered, the kernel's current policy
 table is unchanged.
 .RE
@@ -280,12 +272,10 @@ table is unchanged.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/ipaddrsel.conf\fR\fR
 .ad
 .RS 28n
-.rt  
 The file that contains the IPv6 default address selection policy to be
 installed at boot time. This file is loaded before any Internet services are
 started.
@@ -299,13 +289,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ipf.1m b/usr/src/man/man1m/ipf.1m
index 645e3c873b..69cdacf689 100644
--- a/usr/src/man/man1m/ipf.1m
+++ b/usr/src/man/man1m/ipf.1m
@@ -2,14 +2,14 @@
 .\" To view license terms, attribution, and copyright for IP Filter, the default path is /usr/lib/ipf/IPFILTER.LICENCE. If the Solaris operating environment has been installed anywhere other than the default, modify the given path to access the file at the installed
 .\" location.
 .\" Portions Copyright (c) 2009, Sun Microsystems Inc. All Rights Reserved.
-.TH ipf 1M "25 Feb 2009" "SunOS 5.11" "System Administration Commands"
+.TH IPF 1M "Feb 25, 2009"
 .SH NAME
 ipf \- alter packet filtering lists for IP packet input and output
 .SH SYNOPSIS
 .LP
 .nf
-\fBipf\fR [\fB-6AdDEInoPRrsvVyzZ\fR] [\fB-l\fR block | pass | nomatch] 
-     [\fB-T\fR \fIoptionlist\fR] [\fB-F\fR i | o | a | s | S] \fB-f\fR \fIfilename\fR 
+\fBipf\fR [\fB-6AdDEInoPRrsvVyzZ\fR] [\fB-l\fR block | pass | nomatch]
+     [\fB-T\fR \fIoptionlist\fR] [\fB-F\fR i | o | a | s | S] \fB-f\fR \fIfilename\fR
      [\fB-f\fR \fIfilename\fR...]
 .fi
 
@@ -164,7 +164,6 @@ activated.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-6\fR\fR
 .ad
@@ -176,7 +175,6 @@ IPv6 rules is subject to change in the future.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR\fR
 .ad
@@ -187,7 +185,6 @@ Set the list to make changes to the active list (default).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -199,7 +196,6 @@ processes each one.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
@@ -210,7 +206,6 @@ Disable the filter (if enabled). Not effective for loadable kernel versions.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-E\fR\fR
 .ad
@@ -221,7 +216,6 @@ Enable the filter (if disabled). Not effective for loadable kernel versions.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fBi\fR | \fBo\fR | \fBa\fR\fR
 .ad
@@ -236,7 +230,6 @@ determining that used to execute options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fBs\fR | \fBS\fR\fR
 .ad
@@ -252,7 +245,6 @@ indicating the connection is not fully established.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfilename\fR\fR
 .ad
@@ -264,7 +256,6 @@ packet filter rule lists.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR\fR
 .ad
@@ -275,7 +266,6 @@ Set the list to make changes to the inactive list.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fBpass\fR | \fBblock\fR | \fBnomatch\fR\fR
 .ad
@@ -290,7 +280,6 @@ logged.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -302,7 +291,6 @@ alter the currently running kernel.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
@@ -314,7 +302,6 @@ the (default) input list.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR\fR
 .ad
@@ -325,7 +312,6 @@ Add rules as temporary entries in the authentication rule table.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR\fR
 .ad
@@ -337,7 +323,6 @@ resolution.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -348,7 +333,6 @@ Remove matching filter rules rather than add them to the internal lists.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
@@ -359,7 +343,6 @@ Swap the currently active filter list to be an alternative list.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fIoptionlist\fR\fR
 .ad
@@ -371,7 +354,6 @@ not. The \fIoptionlist\fR parameter is a comma-separated list of tuning
 commands. A tuning command is one of the following:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist\fR\fR
 .ad
@@ -383,7 +365,6 @@ current value.
 
 .sp
 .ne 2
-.mk
 .na
 \fBsingle variable name\fR
 .ad
@@ -394,7 +375,6 @@ Retrieve its current value.
 
 .sp
 .ne 2
-.mk
 .na
 \fBvariable name with a following assignment\fR
 .ad
@@ -424,7 +404,6 @@ ipf -T fr_pass,fr_chksrc,fr_chksrc=1
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -435,7 +414,6 @@ Turn verbose mode on. Displays information relating to rule processing.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
@@ -450,7 +428,6 @@ and so forth).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-y\fR\fR
 .ad
@@ -462,7 +439,6 @@ current interface status list.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-z\fR\fR
 .ad
@@ -474,7 +450,6 @@ display the statistics prior to them being zeroed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Z\fR\fR
 .ad
@@ -487,7 +462,6 @@ affect fragment or state statistics.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/ipauth\fR\fR
 .ad
@@ -506,7 +480,6 @@ Links to IP Filter pseudo devices.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ipf/ipf.conf\fR\fR
 .ad
@@ -517,7 +490,6 @@ Location of \fBipf\fR startup configuration file. See \fBipf\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/share/ipfilter/examples/\fR\fR
 .ad
@@ -534,13 +506,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ipfs.1m b/usr/src/man/man1m/ipfs.1m
index 8d6a740fd0..ea2f16c065 100644
--- a/usr/src/man/man1m/ipfs.1m
+++ b/usr/src/man/man1m/ipfs.1m
@@ -2,7 +2,7 @@
 .\" To view license terms, attribution, and copyright for IP Filter, the default path is /usr/lib/ipf/IPFILTER.LICENCE. If the Solaris operating environment has been installed anywhere other than the default, modify the given path to access the file at the installed
 .\" location.
 .\" Portions Copyright (c) 2008, Sun Microsystems Inc. All Rights Reserved.
-.TH ipfs 1M "3 Apr 2008" "SunOS 5.11" "System Administration Commands"
+.TH IPFS 1M "Apr 3, 2008"
 .SH NAME
 ipfs \- saves and restores information for NAT and state tables
 .SH SYNOPSIS
@@ -55,91 +55,75 @@ state-saving is that connections are not interrupted.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 6n
-.rt  
 Change the default directory used with \fB-R\fR and \fB-W\fR options for saving
 state information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 6n
-.rt  
 Do not take any action that would affect information stored in the kernel or on
 disk.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 Provides a verbose description of \fBipfs\fR activities.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-N\fR\fR
 .ad
 .RS 6n
-.rt  
 Operate on NAT information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR\fR
 .ad
 .RS 6n
-.rt  
 Operate on filtering state information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
 .RS 6n
-.rt  
 Unlock state tables in the kernel.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 6n
-.rt  
 Lock state tables in the kernel.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 6n
-.rt  
 Read information in from the specified file and load it into the kernel. This
 requires the state tables to have already been locked and does not change the
 lock once complete.
@@ -147,12 +131,10 @@ lock once complete.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR\fR
 .ad
 .RS 6n
-.rt  
 Write information out to the specified file and from the kernel. This requires
 the state tables to have already been locked and does not change the lock once
 complete.
@@ -160,12 +142,10 @@ complete.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR\fR
 .ad
 .RS 6n
-.rt  
 Restores all saved state information, if any, from two files, \fBipstate.ipf\fR
 and \fBipnat.ipf\fR, stored in the \fB/var/db/ipf\fR directory. This directory
 can be changed with the \fB-d\fR option. The state tables are locked at the
@@ -174,12 +154,10 @@ beginning of this operation and unlocked once complete.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-W\fR\fR
 .ad
 .RS 6n
-.rt  
 Saves in-kernel state information, if any, out to two files, \fBipstate.ipf\fR
 and \fBipnat.ipf\fR, stored in the \fB/var/db/ipf\fR directory. This directory
 can be changed with the \fB-d\fR option. The state tables are locked at the
@@ -225,13 +203,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ipfstat.1m b/usr/src/man/man1m/ipfstat.1m
index ef8f80d957..212de841a9 100644
--- a/usr/src/man/man1m/ipfstat.1m
+++ b/usr/src/man/man1m/ipfstat.1m
@@ -2,7 +2,7 @@
 .\" To view license terms, attribution, and copyright for IP Filter, the default path is /usr/lib/ipf/IPFILTER.LICENCE. If the Solaris operating environment has been installed anywhere other than the default, modify the given path to access the file at the installed
 .\" location.
 .\" Portions Copyright (c) 2008, Sun Microsystems Inc. All Rights Reserved.
-.TH ipfstat 1M "3 Apr 2008" "SunOS 5.11" "System Administration Commands"
+.TH IPFSTAT 1M "Apr 3, 2008"
 .SH NAME
 ipfstat \- reports on packet filter statistics and filter list
 .SH SYNOPSIS
@@ -13,7 +13,7 @@ ipfstat \- reports on packet filter statistics and filter list
 
 .LP
 .nf
-\fBipfstat\fR [\fB-C\fR] [\fB-D\fR \fIaddrport\fR] [\fB-P\fR \fIprotocol\fR] [\fB-S\fR \fIaddrport\fR] 
+\fBipfstat\fR [\fB-C\fR] [\fB-D\fR \fIaddrport\fR] [\fB-P\fR \fIprotocol\fR] [\fB-S\fR \fIaddrport\fR]
      [\fB-T\fR \fIrefreshtime\fR]
 .fi
 
@@ -68,56 +68,46 @@ In state top mode, use the following keys to influence the displayed
 information:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBd\fR\fR
 .ad
 .RS 5n
-.rt  
 Select information to display.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBl\fR\fR
 .ad
 .RS 5n
-.rt  
 Redraw the screen.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBq\fR\fR
 .ad
 .RS 5n
-.rt  
 Quit the program.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBs\fR\fR
 .ad
 .RS 5n
-.rt  
 Switch between different sorting criteria.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBr\fR\fR
 .ad
 .RS 5n
-.rt  
 Reverse the sorting criteria.
 .RE
 
@@ -147,46 +137,38 @@ to see additional entries.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-6\fR\fR
 .ad
 .RS 18n
-.rt  
 Display filter lists and states for IPv6, if available. This option might
 change in the future.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 18n
-.rt  
 Display the accounting filter list and show bytes counted against each rule.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR\fR
 .ad
 .RS 18n
-.rt  
 Display packet authentication statistics.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR\fR
 .ad
 .RS 18n
-.rt  
 Valid only in combination with \fB-t\fR. Display "closed" states as well in the
 top. Normally, a TCP connection is not displayed when it reaches the
 \fBCLOSE_WAIT\fR protocol state. With this option enabled, all state entries
@@ -195,23 +177,19 @@ are displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 18n
-.rt  
 Produce debugging output when displaying data.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR \fIaddrport\fR\fR
 .ad
 .RS 18n
-.rt  
 Valid only in combination with \fB-t\fR. Limit the state top display to show
 only state entries whose destination IP address and port match the
 \fIaddrport\fR argument. The \fIaddrport\fR specification is of the form
@@ -223,103 +201,85 @@ port, in that order). If the \fB-D\fR option is not specified, it defaults to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 18n
-.rt  
 Show fragment state information (statistics) and held state information (in the
 kernel) if any is present.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR\fR
 .ad
 .RS 18n
-.rt  
 Show groups currently configured (both active and inactive).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 18n
-.rt  
 Show per-rule the number of times each one scores a "hit". For use in
 combination with \fB-i\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 18n
-.rt  
 Display the filter list used for the input side of the kernel IP processing.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR\fR
 .ad
 .RS 18n
-.rt  
 Swap between retrieving \fBinactive\fR/\fBactive\fR filter list details. For
 use in combination with \fB-i\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 18n
-.rt  
 When used with \fB-s\fR, show a list of active state entries (no statistics).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 18n
-.rt  
 Show the rule number for each rule as it is printed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 18n
-.rt  
 Display the filter list used for the output side of the kernel IP processing.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIprotocol\fR\fR
 .ad
 .RS 18n
-.rt  
 Valid only in combination with \fB-t\fR. Limit the state top display to show
 only state entries that match a specific protocol. The argument can be a
 protocol name (as defined in \fB/etc/protocols\fR) or a protocol number. If
@@ -328,24 +288,20 @@ this option is not specified, state entries for any protocol are specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR\fR
 .ad
 .RS 18n
-.rt  
 Disable both IP address-to-hostname resolution and port number-to-service name
 resolution.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR \fIaddrport\fR\fR
 .ad
 .RS 18n
-.rt  
 Valid only in combination with \fB-t\fR. Limit the state top display to show
 only state entries whose source IP address and port match the \fIaddrport\fR
 argument. The \fIaddrport\fR specification is of the form
@@ -357,23 +313,19 @@ port, in that order). If the \fB-S\fR option is not specified, it defaults to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 18n
-.rt  
 Show packet/flow state information (statistics only).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fIrefreshtime\fR\fR
 .ad
 .RS 18n
-.rt  
 Valid only in combination with \fB-t\fR. Specifies how often the state
 \fBtop\fR display should be updated. The refresh time is the number of seconds
 between an update. Any positive integer can be used. The default (and minimal
@@ -382,24 +334,20 @@ update time) is 1.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
 .RS 18n
-.rt  
 Show the state table in a way similar to the way the Unix utility, \fBtop\fR,
 shows the process table. States can be sorted in a number of different ways.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 18n
-.rt  
 Turn verbose mode on. Displays additional debugging information.
 .RE
 
@@ -436,13 +384,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ipmon.1m b/usr/src/man/man1m/ipmon.1m
index 3540b8709e..2094979915 100644
--- a/usr/src/man/man1m/ipmon.1m
+++ b/usr/src/man/man1m/ipmon.1m
@@ -2,13 +2,13 @@
 .\" To view license terms, attribution, and copyright for IP Filter, the default path is /usr/lib/ipf/IPFILTER.LICENCE. If the Solaris operating environment has been installed anywhere other than the default, modify the given path to access the file at the installed
 .\" location.
 .\" Portions Copyright (c) 2008, Sun Microsystems Inc. All Rights Reserved.
-.TH ipmon 1M "3 Apr 2008" "SunOS 5.11" "System Administration Commands"
+.TH IPMON 1M "Apr 3, 2008"
 .SH NAME
 ipmon \- monitors /dev/ipl for logged packets
 .SH SYNOPSIS
 .LP
 .nf
-\fBipmon\fR [\fB-abDFhnpstvxX\fR] [\fB-N\fR \fIdevice\fR] [ [o] [NSI]] [\fB-O\fR [NSI]] 
+\fBipmon\fR [\fB-abDFhnpstvxX\fR] [\fB-N\fR \fIdevice\fR] [ [o] [NSI]] [\fB-O\fR [NSI]]
      [\fB-P\fR \fIpidfile\fR] [\fB-S\fR \fIdevice\fR] [\fB-f\fR \fIdevice\fR] [\fIfilename\fR]
 .fi
 
@@ -107,7 +107,6 @@ message.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -119,7 +118,6 @@ displayed to the same output device (stderr or syslog).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR\fR
 .ad
@@ -131,7 +129,6 @@ packet contents after the headers.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
@@ -144,7 +141,6 @@ can run indefinitely.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIdevice\fR\fR
 .ad
@@ -156,7 +152,6 @@ normal IP Filter log records.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fR
 .ad
@@ -168,7 +163,6 @@ even if the result is zero.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -179,7 +173,6 @@ Displays usage information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -191,7 +184,6 @@ hostnames and service names.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-N\fR \fIdevice\fR\fR
 .ad
@@ -203,7 +195,6 @@ Set the logfile to be opened for reading NAT log records from or to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIletter\fR\fR
 .ad
@@ -216,7 +207,6 @@ is equivalent to using \fB-o\fR \fBNSI\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-O\fR \fIletter\fR\fR
 .ad
@@ -229,7 +219,6 @@ same as for \fB-o\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
@@ -241,7 +230,6 @@ never attempt to look it up.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIpidfile\fR\fR
 .ad
@@ -253,7 +241,6 @@ Write the PD of the \fBipmon\fR process to a file. By default this is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
@@ -264,7 +251,6 @@ to a file. The default facility when compiled and installed is \fBlocal0\fR.
 The following levels are used:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLOG_INFO\fR\fR
 .ad
@@ -276,7 +262,6 @@ or \fBblock\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLOG_NOTICE\fR\fR
 .ad
@@ -287,7 +272,6 @@ Packets logged that are also passed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLOG_WARNING\fR\fR
 .ad
@@ -298,7 +282,6 @@ Packets logged that are also blocked.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLOG_ERR\fR\fR
 .ad
@@ -311,7 +294,6 @@ Packets that have been logged and that can be considered "short".
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR \fIdevice\fR\fR
 .ad
@@ -323,7 +305,6 @@ Set the logfile to be opened for reading state log records from or to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
@@ -334,7 +315,6 @@ Read the input file/device in the way performed by \fBtail\fR(1).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -345,7 +325,6 @@ Show TCP \fBwindow\fR, \fBack\fR, and \fBsequence\fR fields
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
@@ -356,7 +335,6 @@ Show the packet data in hex.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-X\fR\fR
 .ad
@@ -392,13 +370,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ipmpstat.1m b/usr/src/man/man1m/ipmpstat.1m
index c1be02f0a2..f08254a89f 100644
--- a/usr/src/man/man1m/ipmpstat.1m
+++ b/usr/src/man/man1m/ipmpstat.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ipmpstat 1M "10 Feb 2009" "SunOS 5.11" "System Administration Commands"
+.TH IPMPSTAT 1M "Feb 10, 2009"
 .SH NAME
 ipmpstat \- display IPMP subsystem status
 .SH SYNOPSIS
@@ -30,7 +30,6 @@ privileges.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -41,7 +40,6 @@ Display IPMP data address information ("address" output mode).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR\fR
 .ad
@@ -52,7 +50,6 @@ Display IPMP group information ("group" output mode).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
@@ -63,7 +60,6 @@ Display IP interface information ("interface" output mode).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -75,7 +71,6 @@ hostnames. This option may be used in any output mode.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIfield\fR[,...]\fR
 .ad
@@ -89,7 +84,6 @@ may be used to display all fields for a given output mode.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
@@ -100,7 +94,6 @@ Display IPMP probe information ("probe" output mode).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
@@ -111,7 +104,6 @@ Display IPMP target information ("target" output mode).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR\fR
 .ad
@@ -129,7 +121,6 @@ The \fBipmpstat\fR utility supports the output modes listed below. Note that
 these modes map to some of the options described above.
 .sp
 .ne 2
-.mk
 .na
 \fBAddress Mode\fR
 .ad
@@ -139,7 +130,6 @@ Address mode displays the state of all IPMP data addresses on the system. The
 following output fields are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBADDRESS\fR\fR
 .ad
@@ -154,7 +144,6 @@ take precedence.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSTATE\fR\fR
 .ad
@@ -166,7 +155,6 @@ The state of the address. Either \fBup\fR if the address is \fBIFF_UP\fR (see
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBGROUP\fR\fR
 .ad
@@ -177,7 +165,6 @@ The IPMP IP interface hosting the address.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBINBOUND\fR\fR
 .ad
@@ -192,7 +179,6 @@ interfaces left in the IPMP group).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBOUTBOUND\fR\fR
 .ad
@@ -210,7 +196,6 @@ If \fB-o\fR is not specified, all output fields are displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fBGroup Mode\fR
 .ad
@@ -220,7 +205,6 @@ Group mode displays the state of all IPMP groups on the system. The following
 output fields are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBGROUP\fR\fR
 .ad
@@ -232,7 +216,6 @@ group (see \fBin.mpathd\fR(1M)), this field will be empty.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBGROUPNAME\fR\fR
 .ad
@@ -243,7 +226,6 @@ The IPMP group name. For the anonymous group, this field will be empty.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSTATE\fR\fR
 .ad
@@ -252,34 +234,28 @@ The IPMP group name. For the anonymous group, this field will be empty.
 The state of the group:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBok\fR\fR
 .ad
 .RS 12n
-.rt  
 All interfaces in the group are usable.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdegraded\fR\fR
 .ad
 .RS 12n
-.rt  
 Some (but not all) interfaces in the group are usable.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfailed\fR\fR
 .ad
 .RS 12n
-.rt  
 No interfaces in the group are usable.
 .RE
 
@@ -287,7 +263,6 @@ No interfaces in the group are usable.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFDT\fR\fR
 .ad
@@ -299,7 +274,6 @@ disabled, this field will be empty.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBINTERFACES\fR\fR
 .ad
@@ -335,7 +309,6 @@ If \fB-o\fR is not specified, all output fields are displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fBInterface Mode\fR
 .ad
@@ -345,7 +318,6 @@ Interface mode displays the state of all IP interfaces that are tracked by
 \fBin.mpathd\fR on the system. The following output fields are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBINTERFACE\fR\fR
 .ad
@@ -356,7 +328,6 @@ The IP interface name associated with the information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBACTIVE\fR\fR
 .ad
@@ -368,7 +339,6 @@ used by the system for IP data traffic.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBGROUP\fR\fR
 .ad
@@ -380,7 +350,6 @@ the anonymous group (see \fBin.mpathd\fR(1M)), this field will be empty.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFLAGS\fR\fR
 .ad
@@ -389,78 +358,64 @@ the anonymous group (see \fBin.mpathd\fR(1M)), this field will be empty.
 Assorted information about the IP interface:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBi\fR\fR
 .ad
 .RS 5n
-.rt  
 Unusable due to being \fBINACTIVE\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBs\fR\fR
 .ad
 .RS 5n
-.rt  
 Marked \fBSTANDBY\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBm\fR\fR
 .ad
 .RS 5n
-.rt  
 Nominated to send/receive IPv4 multicast for its IPMP group.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBb\fR\fR
 .ad
 .RS 5n
-.rt  
 Nominated to send/receive IPv4 broadcast for its IPMP group.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBM\fR\fR
 .ad
 .RS 5n
-.rt  
 Nominated to send/receive IPv6 multicast for its IPMP group.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBd\fR\fR
 .ad
 .RS 5n
-.rt  
 Unusable due to being \fBdown\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBh\fR\fR
 .ad
 .RS 5n
-.rt  
 Unusable due to being brought \fBOFFLINE\fR by \fBin.mpathd\fR because of a
 duplicate hardware address.
 .RE
@@ -469,7 +424,6 @@ duplicate hardware address.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLINK\fR\fR
 .ad
@@ -478,7 +432,6 @@ duplicate hardware address.
 The state of link-based failure detection:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBup\fR\fR
 .ad
@@ -489,7 +442,6 @@ The link is up.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdown\fR\fR
 .ad
@@ -500,7 +452,6 @@ The link is down.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunknown\fR\fR
 .ad
@@ -513,7 +464,6 @@ The network driver does not report link state changes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPROBE\fR\fR
 .ad
@@ -522,7 +472,6 @@ The network driver does not report link state changes.
 The state of probe-based failure detection:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBok\fR\fR
 .ad
@@ -533,7 +482,6 @@ Probes detect no problems.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfailed\fR\fR
 .ad
@@ -544,7 +492,6 @@ Probes detect failure.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunknown\fR\fR
 .ad
@@ -555,7 +502,6 @@ Probes cannot be sent since no suitable probe targets are known.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisabled\fR\fR
 .ad
@@ -569,7 +515,6 @@ configured.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSTATE\fR\fR
 .ad
@@ -578,7 +523,6 @@ configured.
 The overall state of the interface:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBok\fR\fR
 .ad
@@ -590,7 +534,6 @@ failure detection methods.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfailed\fR\fR
 .ad
@@ -602,7 +545,6 @@ The interface is online but has a link state of \fBdown\fR or a probe state of
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBoffline\fR\fR
 .ad
@@ -613,7 +555,6 @@ The interface is offline.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunknown\fR\fR
 .ad
@@ -630,7 +571,6 @@ If \fB-o\fR is not specified, all output fields are displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fBProbe Mode\fR
 .ad
@@ -641,7 +581,6 @@ Unlike other output modes, this mode runs until explicitly terminated using
 \fBCtrl-C\fR. The following output fields are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTIME\fR\fR
 .ad
@@ -653,7 +592,6 @@ the probe was sent prior to starting \fBipmpstat\fR, the time will be negative.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPROBE\fR\fR
 .ad
@@ -667,7 +605,6 @@ this identifier matches the \fBicmp_seq\fR field of the ICMP probe packet.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBINTERFACE\fR\fR
 .ad
@@ -678,7 +615,6 @@ The IP interface the probe was sent on.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTARGET\fR\fR
 .ad
@@ -689,7 +625,6 @@ The hostname (or IP address) of the target the probe was sent to.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNETRTT\fR\fR
 .ad
@@ -703,7 +638,6 @@ empty.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRTT\fR\fR
 .ad
@@ -719,7 +653,6 @@ local system itself is overloaded.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRTTAVG\fR\fR
 .ad
@@ -732,7 +665,6 @@ average, this field will be empty.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRTTDEV\fR\fR
 .ad
@@ -750,7 +682,6 @@ If \fB-o\fR is not specified, all fields except for \fBRTTAVG\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fBTarget Mode\fR
 .ad
@@ -760,7 +691,6 @@ Target mode displays IPMP probe target information. The following output fields
 are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBINTERFACE\fR\fR
 .ad
@@ -771,7 +701,6 @@ The IP interface name associated with the information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMODE\fR\fR
 .ad
@@ -780,34 +709,28 @@ The IP interface name associated with the information.
 The probe target discovery mode:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBroutes\fR\fR
 .ad
 .RS 13n
-.rt  
 Probe targets found by means of the routing table.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmulticast\fR\fR
 .ad
 .RS 13n
-.rt  
 Probe targets found by means of multicast ICMP probes.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisabled\fR\fR
 .ad
 .RS 13n
-.rt  
 Probe-based failure detection is disabled.
 .RE
 
@@ -815,7 +738,6 @@ Probe-based failure detection is disabled.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTESTADDR\fR\fR
 .ad
@@ -830,7 +752,6 @@ address.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTARGETS\fR\fR
 .ad
@@ -919,17 +840,16 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 _
-Machine-Parseable FormatCommitted
+Machine-Parseable Format	Committed
 _
-Human-Friendly FormatNot-an-Interface
+Human-Friendly Format	Not-an-Interface
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/ipnat.1m b/usr/src/man/man1m/ipnat.1m
index 8636e098ee..6e36a50e26 100644
--- a/usr/src/man/man1m/ipnat.1m
+++ b/usr/src/man/man1m/ipnat.1m
@@ -2,7 +2,7 @@
 .\" To view license terms, attribution, and copyright for IP Filter, the default path is /usr/lib/ipf/IPFILTER.LICENCE. If the Solaris operating environment has been installed anywhere other than the default, modify the given path to access the file at the installed
 .\" location.
 .\" Portions Copyright (c) 2008, Sun Microsystems Inc. All Rights Reserved.
-.TH ipnat 1M "3 Apr 2008" "SunOS 5.11" "System Administration Commands"
+.TH IPNAT 1M "Apr 3, 2008"
 .SH NAME
 ipnat \- user interface to the NAT subsystem
 .SH SYNOPSIS
@@ -37,127 +37,105 @@ operations.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR\fR
 .ad
 .RS 15n
-.rt  
 Delete all entries in the current NAT rule listing (NAT rules).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 15n
-.rt  
 Turn debug mode on. Causes a hex dump of filter rules to be generated as it
 processes each one.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fR
 .ad
 .RS 15n
-.rt  
 Delete all active entries in the current NAT translation table (currently
 active NAT mappings).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfilename\fR\fR
 .ad
 .RS 15n
-.rt  
 Parse specified file for rules to be added or removed from the IP NAT.
 \fIfilename\fR can be stdin.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 15n
-.rt  
 Print number of hits for each MAP/Redirect filter.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 15n
-.rt  
 Show the list of current NAT table entry mappings.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 15n
-.rt  
 Prevents \fBipf\fR from doing anything, such as making ioctl calls, which might
 alter the currently running kernel.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR\fR
 .ad
 .RS 15n
-.rt  
 Disable both IP address-to-hostname resolution and port number-to-service name
 resolution.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 15n
-.rt  
 Remove matching NAT rules rather than add them to the internal lists.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 15n
-.rt  
 Retrieve and display NAT statistics.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 15n
-.rt  
 Turn verbose mode on. Displays information relating to rule processing and
 active rules/table entries.
 .RE
@@ -165,7 +143,6 @@ active rules/table entries.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/ipnat\fR\fR
 .ad
@@ -176,7 +153,6 @@ Link to IP Filter pseudo device.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/kmem\fR\fR
 .ad
@@ -187,7 +163,6 @@ Special file that provides access to virtual address space.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ipf/ipnat.conf\fR\fR
 .ad
@@ -198,7 +173,6 @@ Location of \fBipnat\fR startup configuration file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/share/ipfilter/examples/\fR\fR
 .ad
@@ -215,13 +189,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ippool.1m b/usr/src/man/man1m/ippool.1m
index b9031885d0..38e7cc19e6 100644
--- a/usr/src/man/man1m/ippool.1m
+++ b/usr/src/man/man1m/ippool.1m
@@ -2,19 +2,19 @@
 .\" To view license terms, attribution, and copyright for IP Filter, the default path is /usr/lib/ipf/IPFILTER.LICENCE. If the Solaris operating environment has been installed anywhere other than the default, modify the given path to access the file at the installed
 .\" location.
 .\" Portions Copyright (c) 2008, Sun Microsystems Inc. All Rights Reserved.
-.TH ippool 1M "3 Apr 2008" "SunOS 5.11" "System Administration Commands"
+.TH IPPOOL 1M "Apr 3, 2008"
 .SH NAME
 ippool \- user interface to the IP Filter pools
 .SH SYNOPSIS
 .LP
 .nf
-\fBippool\fR \fB-a\fR [\fB-dnv\fR] [\fB-m\fR \fIpoolname\fR] [\fB-o\fR \fIrole\fR] \fB-i\fR \fIipaddr\fR 
+\fBippool\fR \fB-a\fR [\fB-dnv\fR] [\fB-m\fR \fIpoolname\fR] [\fB-o\fR \fIrole\fR] \fB-i\fR \fIipaddr\fR
      [/\fInetmask\fR]
 .fi
 
 .LP
 .nf
-\fBippool\fR \fB-A\fR [\fB-dnv\fR] [\fB-m\fR \fIpoolname\fR] [\fB-o\fR \fIrole\fR] [\fB-S\fR \fIseed\fR] 
+\fBippool\fR \fB-A\fR [\fB-dnv\fR] [\fB-m\fR \fIpoolname\fR] [\fB-o\fR \fIrole\fR] [\fB-S\fR \fIseed\fR]
      [\fB-t\fR \fItype\fR]
 .fi
 
@@ -40,7 +40,7 @@ ippool \- user interface to the IP Filter pools
 
 .LP
 .nf
-\fBippool\fR \fB-r\fR [\fB-dnv\fR] [\fB-m\fR \fIpoolname\fR] [\fB-o\fR \fIrole\fR] \fB-i\fR \fIipaddr\fR 
+\fBippool\fR \fB-r\fR [\fB-dnv\fR] [\fB-m\fR \fIpoolname\fR] [\fB-o\fR \fIrole\fR] \fB-i\fR \fIipaddr\fR
      [/\fInetmask\fR]
 .fi
 
@@ -85,35 +85,29 @@ require \fBippool\fR to be run as root for all operations.
 The following global options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 6n
-.rt  
 Toggle debugging of processing the configuration file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 6n
-.rt  
 Prevents \fBippool\fR from doing anything, such as making ioctl calls, that
 would alter the currently running kernel.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 Turn verbose mode on.
 .RE
 
@@ -123,101 +117,83 @@ Turn verbose mode on.
 The following instance-specific options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 11n
-.rt  
 Add a new data node to an existing pool in the kernel.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR\fR
 .ad
 .RS 11n
-.rt  
 Add a new (empty) pool to the kernel.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfile\fR\fR
 .ad
 .RS 11n
-.rt  
 Read in IP pool configuration information from \fIfile\fR and load it into the
 kernel.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fR
 .ad
 .RS 11n
-.rt  
 Flush loaded pools from the kernel.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 11n
-.rt  
 Display a list of pools of the type: hash loaded in the kernel.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 11n
-.rt  
 Display a list of pools of the type: tree loaded in the kernel.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 11n
-.rt  
 Remove an existing data node from a pool in the kernel.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR\fR
 .ad
 .RS 11n
-.rt  
 Remove an existing pool from within the kernel.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 11n
-.rt  
 Display IP pool statistical information.
 .RE
 
@@ -227,12 +203,10 @@ Display IP pool statistical information.
 The following, additional options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIipaddr\fR[/\fInetmask\fR]\fR
 .ad
 .RS 23n
-.rt  
 Sets the IP address for the operation being undertaken with an all-one's mask
 or, optionally, a specific netmask, given in either dotted-quad notation or as
 a single integer.
@@ -240,83 +214,69 @@ a single integer.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fIpoolname\fR\fR
 .ad
 .RS 23n
-.rt  
 Sets the pool name for the current operation.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR \fIcore\fR\fR
 .ad
 .RS 23n
-.rt  
 Specify an alternative path to \fB/dev/kmem\fR from which to retrieve
 statistical information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-N\fR \fInamelist\fR\fR
 .ad
 .RS 23n
-.rt  
 Specify an alternative path to lookup symbol name information when retrieving
 statistical information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIrole\fR\fR
 .ad
 .RS 23n
-.rt  
 Sets the role with which this pool is to be used. Currently only \fBipf\fR,
 \fBauth\fR, and \fBcount\fR are accepted as arguments to this option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR \fIseed\fR\fR
 .ad
 .RS 23n
-.rt  
 Sets the hashing seed to the number specified. For use with hash-type pools
 only.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fItype\fR\fR
 .ad
 .RS 23n
-.rt  
 Sets the type of pool being defined. Must be one of \fBpool\fR, \fBhash\fR, or
 \fBgroup-map\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
 .RS 23n
-.rt  
 When parsing a configuration file, rather than load new pool data into the
 kernel, unload it.
 .RE
@@ -324,34 +284,28 @@ kernel, unload it.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/ippool\fR\fR
 .ad
 .RS 24n
-.rt  
 Link to IP Filter pseudo device.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/kmem\fR\fR
 .ad
 .RS 24n
-.rt  
 Special file that provides access to virtual address space.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ipf/ippool.conf\fR\fR
 .ad
 .RS 24n
-.rt  
 Location of \fBippool\fR startup configuration file.
 .RE
 
@@ -363,13 +317,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ipqosconf.1m b/usr/src/man/man1m/ipqosconf.1m
index e3b3aa1973..9766afceec 100644
--- a/usr/src/man/man1m/ipqosconf.1m
+++ b/usr/src/man/man1m/ipqosconf.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ipqosconf 1M "18 Dec 2008" "SunOS 5.11" "System Administration Commands"
+.TH IPQOSCONF 1M "Dec 18, 2008"
 .SH NAME
 ipqosconf \- configure the IPQoS facility
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/ipqosconf\fR 
+\fB/usr/sbin/ipqosconf\fR
 .fi
 
 .LP
@@ -58,57 +58,47 @@ then read from the \fBsvc:/network/initial:default\fR service.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIconf_file\fR\fR
 .ad
 .RS 16n
-.rt  
 Apply the configuration in \fIconf_file\fR. If the \fIconf_file\fR is
 \fB\(mi\fR, \fBipqosconf\fR reads from standard input.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 16n
-.rt  
 Populate the boot file with the current configuration.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 16n
-.rt  
 Flush the configuration.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 16n
-.rt  
 List the current applied configuration.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR\fR
 .ad
 .RS 16n
-.rt  
 List the current configuration in verbose mode.
 .sp
 In addition to the information that the \fB-l\fR option provides, the \fB-L\fR
@@ -120,23 +110,19 @@ configuration file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 16n
-.rt  
 Log messages to \fBsyslog\fR during an \fB-a\fR operation.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 16n
-.rt  
 Toggle verbose mode during an \fB-a\fR operation.
 .sp
 The \fB-v\fR option causes all messages to go to the console in addition to
@@ -186,7 +172,7 @@ action {
       cf_clauses
 }
 
-action_name      ::= string 
+action_name      ::= string
 module_name      ::= ipgpc | dlcosmk | dscpmk | flowacct | tswtclmt |
                      tokenmt
 
@@ -197,7 +183,7 @@ params_clause    ::= params {
 
 parameters       ::= prm_name_value parameters | ""
 
-prm_name_value   ::= \fIparam_name\fR \fIparam_value\fR 
+prm_name_value   ::= \fIparam_name\fR \fIparam_value\fR
 .fi
 .in -2
 .sp
@@ -300,7 +286,7 @@ peak_rate               uint32
 <if present this signifies that this will be a two rate meter, not
    a single rate meter>
 peak_burst              uint32
-<this is the 'peak' burst size for a two rate meter, but 
+<this is the 'peak' burst size for a two rate meter, but
    the 'excess' burst size for a single rate meter>
 color_aware             boolean
 color_map               integer_array
@@ -361,7 +347,7 @@ CLASSIFIER module ipgpc configuration syntax:
 user               user
 projid             int32
 if_name            ifname
-direction          enum { 
+direction          enum {
                    LOCAL_IN,
                    LOCAL_OUT,
                    FWD_IN,
@@ -400,12 +386,10 @@ max_limit        uint32
 .SS "Types"
 .sp
 .ne 2
-.mk
 .na
 \fB\fIaction\fR\fR
 .ad
 .RS 17n
-.rt  
 A string of characters with a matching action definition. The character string
 can be up to twenty three characters in length. To allow for spaces the string
 needs to be enclosed in quotes and cannot span lines. Two special actions are
@@ -417,12 +401,10 @@ is passed to it to be dropped.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIaddress\fR\fR
 .ad
 .RS 17n
-.rt  
 A machine name or address recognized by \fBgetipnodebyname\fR(3SOCKET). If a
 machine name is specified, and \fBip_version\fR has been defined, the query is
 done using that address family. If a machine name is not specified and
@@ -436,36 +418,30 @@ names.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIenum\fR\fR
 .ad
 .RS 17n
-.rt  
 Either one of the supported values or comma delimited list of support values,
 enclosed in curly braces.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIifname\fR\fR
 .ad
 .RS 17n
-.rt  
 A non-\fINULL\fR, existing interface name recognized by the \fBSIOGLIFINDEX\fR
 socket ioctl.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIinteger_array\fR\fR
 .ad
 .RS 17n
-.rt  
 A comma delimited set of \fIrange\fR/\fIvalue\fR pairs, enclosed in curly
 braces.
 .sp
@@ -478,12 +454,10 @@ in the set of ranges are left at their previous value.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fImap_index\fR\fR
 .ad
 .RS 17n
-.rt  
 A non-negative integer used as an index into any maps associated with a
 parameter of this type.
 .sp
@@ -493,48 +467,40 @@ associated maps. The index starts at \fB0\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIport\fR\fR
 .ad
 .RS 17n
-.rt  
 Either a service name recognized by \fBgetservbyname\fR(3SOCKET) or an integer
 \fB1\fR-\fB65535\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIprotocol\fR\fR
 .ad
 .RS 17n
-.rt  
 Either a protocol name recognized by \fBgetprotobyname\fR(3SOCKET) or an
 integer \fB1\fR-\fB255\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIstring\fR\fR
 .ad
 .RS 17n
-.rt  
 A character string. Enclose \fIstring\fR in quotes. \fIstring\fR cannot span
 multiple lines.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIuser\fR\fR
 .ad
 .RS 17n
-.rt  
 Either a valid user ID or username for the system that is being configured.
 .RE
 
@@ -544,24 +510,20 @@ Either a valid user ID or username for the system that is being configured.
 The configuration file can contain the following parameters
 .sp
 .ne 2
-.mk
 .na
 \fBcolor_aware\fR
 .ad
 .RS 23n
-.rt  
 A value of \fBTRUE\fR or \fBFALSE\fR, indicating whether or not the configured
 action takes account of the previous packet coloring when classifying.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBcolor_map\fR
 .ad
 .RS 23n
-.rt  
 An integer array that defines which values of the \fBdscp\fR field correspond
 with which colors for when the \fBcolor_aware\fR parameter is set to
 \fBTRUE\fR.
@@ -569,57 +531,47 @@ with which colors for when the \fBcolor_aware\fR parameter is set to
 
 .sp
 .ne 2
-.mk
 .na
 \fBcommitted_burst\fR
 .ad
 .RS 23n
-.rt  
 The committed burst size in bits.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBcommitted_rate\fR
 .ad
 .RS 23n
-.rt  
 The committed rate in bits per second.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBcos\fR
 .ad
 .RS 23n
-.rt  
 The value used to determine the underlying driver level priority applied to the
 packet which is defined in \fB802.1D\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBdaddr\fR
 .ad
 .RS 23n
-.rt  
 The destination address of the datagram.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBdirection\fR
 .ad
 .RS 23n
-.rt  
 The value used to build a filter matching only part of the traffic.
 .sp
 This parameter is of type \fBenum\fR with valid values of \fBLOCAL_IN\fR (local
@@ -630,23 +582,19 @@ exiting the system).
 
 .sp
 .ne 2
-.mk
 .na
 \fBdport\fR
 .ad
 .RS 23n
-.rt  
 The destination port of the datagram.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBdscp_detailed_stats\fR
 .ad
 .RS 23n
-.rt  
 A value of \fBTRUE\fR or \fBFALSE\fR that determines whether detailed
 statistics are switched on for this \fBdscp\fR action.
 .sp
@@ -655,12 +603,10 @@ Specify \fBTRUE\fR to switch on or \fBFALSE\fR to switch off.
 
 .sp
 .ne 2
-.mk
 .na
 \fBdscp_map\fR
 .ad
 .RS 23n
-.rt  
 The \fIinteger_array\fR that supplies the values that IP packets with a given
 \fBdscp\fR value have their dscp re-marked with.
 .sp
@@ -671,12 +617,10 @@ and valid values are also \fB0\fR-\fB63\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBdsfield\fR
 .ad
 .RS 23n
-.rt  
 The \fBDS\fR field of the \fBIP\fR datagram header. This is an 8-bit value,
 with each bit position corresponding with the same one in the header; this
 enables matches to be done on the CU bits. If you specify this parameter, you
@@ -685,12 +629,10 @@ must also specify the \fBdsfield_mask\fR parameter.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdsfield_mask\fR\fR
 .ad
 .RS 23n
-.rt  
 The mask applied to the \fBdsfield\fR parameter to determine the bits against
 which to match. This is an 8-bit value, with each bit position corresponding
 with the same one in the \fBdsfield\fR parameter.
@@ -698,47 +640,39 @@ with the same one in the \fBdsfield\fR parameter.
 
 .sp
 .ne 2
-.mk
 .na
 \fBglobal_stats\fR
 .ad
 .RS 23n
-.rt  
 A value of \fBTRUE\fR or \fBFALSE\fR to enable or disable the statistic
 collection for this action.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBgreen_action_name\fR
 .ad
 .RS 23n
-.rt  
 The action to be executed for packets that are deemed to be green.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBif_name\fR
 .ad
 .RS 23n
-.rt  
 The name of an interface recognized by the \fBSIOGLIFINDEX\fR ioctl. This
 parameter is of type \fBifname\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBip_version\fR
 .ad
 .RS 23n
-.rt  
 This parameter is of type \fBenum\fR and has valid values of \fBV4\fR and
 \fBV6\fR.
 .sp
@@ -752,24 +686,20 @@ for a specified hostname.
 
 .sp
 .ne 2
-.mk
 .na
 \fBmax_limit\fR
 .ad
 .RS 23n
-.rt  
 The maximum number of flow entries present at one time in the \fBflowacct\fR
 actions in the memory resident table.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnext_action\fR
 .ad
 .RS 23n
-.rt  
 The action to be executed when the current action is complete.
 .sp
 This value can be either the name of an action defined in the configuration
@@ -778,35 +708,29 @@ file, or one of the two special action types: \fBdrop\fR and \fBcontinue\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBpeak_burst\fR
 .ad
 .RS 23n
-.rt  
 The peak burst size, for a two rate meter, or excess burst size, for a single
 rate meter, in bits.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBpeak_rate\fR
 .ad
 .RS 23n
-.rt  
 The peak rate in bits per second.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBprecedence\fR
 .ad
 .RS 23n
-.rt  
 An integer that is used to order filters. If there are two matching filters
 that have the same priority value, the one with the lower precedence value is
 the one matched. This parameter should be used because the order of the filters
@@ -815,12 +739,10 @@ in a configuration file has no influence on their relative precedence.
 
 .sp
 .ne 2
-.mk
 .na
 \fBpriority\fR
 .ad
 .RS 23n
-.rt  
 An integer that represents the relative priority of a filter. If there are two
 matching filters, the one with the higher priority value is the one matched.
 Multiple filters can have the same priority.
@@ -828,114 +750,94 @@ Multiple filters can have the same priority.
 
 .sp
 .ne 2
-.mk
 .na
 \fBprojid\fR
 .ad
 .RS 23n
-.rt  
 The project ID of the process sending the data. This value is always \fB-1\fR
 for received traffic.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBprotocol\fR
 .ad
 .RS 23n
-.rt  
 The Upper Layer Protocol against which this entry is matched.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBred_action_name\fR
 .ad
 .RS 23n
-.rt  
 The action to be executed for packets that are determined to be red.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBsaddr\fR
 .ad
 .RS 23n
-.rt  
 The source address of the datagram.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBsport\fR
 .ad
 .RS 23n
-.rt  
 The source port of the datagram.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBtimeout\fR
 .ad
 .RS 23n
-.rt  
 The timeout in milliseconds after which flows are written to the accounting
 file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBtimer\fR
 .ad
 .RS 23n
-.rt  
 The period in milliseconds at which timed-out flows are checked for.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBuser\fR
 .ad
 .RS 23n
-.rt  
 The user ID or username of the process sending the data. This value is always
 \fB-1\fR for received traffic.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBwindow\fR
 .ad
 .RS 23n
-.rt  
 The window size in ms.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fByellow_action_name\fR
 .ad
 .RS 23n
-.rt  
 The action to be executed for packets that are determined to be yellow.
 .RE
 
@@ -1072,7 +974,6 @@ action {
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/ipqosinit.conf\fR\fR
 .ad
@@ -1084,7 +985,6 @@ exists, it is read from the \fBnetwork/initial:default\fR service.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/ipqosconf.1.sample\fR\fR
 .ad
@@ -1095,7 +995,6 @@ Sample configuration file for an application server
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/ipqosconf.2.sample\fR\fR
 .ad
@@ -1106,7 +1005,6 @@ Sample configuration file that meters the traffic for a specified application
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/ipqosconf.3.sample\fR\fR
 .ad
@@ -1124,13 +1022,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ipsecalgs.1m b/usr/src/man/man1m/ipsecalgs.1m
index 1c2e7fdcaa..915596ba9c 100644
--- a/usr/src/man/man1m/ipsecalgs.1m
+++ b/usr/src/man/man1m/ipsecalgs.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ipsecalgs 1M "5 Jul 2007" "SunOS 5.11" "System Administration Commands"
+.TH IPSECALGS 1M "Jul 5, 2007"
 .SH NAME
 ipsecalgs \- configure the IPsec protocols and algorithms table
 .SH SYNOPSIS
 .LP
 .nf
-\fBipsecalgs\fR 
+\fBipsecalgs\fR
 .fi
 
 .LP
@@ -24,14 +24,14 @@ ipsecalgs \- configure the IPsec protocols and algorithms table
 
 .LP
 .nf
-\fBipsecalgs\fR \fB-a\fR [\fB-P\fR \fIprotocol-number\fR | \fB-p\fR \fIprotocol-name\fR] \fB-k\fR \fIkeylen-list\fR 
+\fBipsecalgs\fR \fB-a\fR [\fB-P\fR \fIprotocol-number\fR | \fB-p\fR \fIprotocol-name\fR] \fB-k\fR \fIkeylen-list\fR
      [\fB-i\fR \fIinc\fR] [\fB-K\fR \fIdefault-keylen\fR] \fB-b\fR \fIblocklen-list\fR \fB-n\fR \fIalg-names\fR
      \fB-N\fR \fIalg-number\fR \fB-m\fR \fImech-name\fR [\fB-f\fR] [\fB-s\fR]
 .fi
 
 .LP
 .nf
-\fBipsecalgs\fR \fB-P\fR \fIprotocol-number\fR \fB-p\fR \fIprotocol-name\fR 
+\fBipsecalgs\fR \fB-P\fR \fIprotocol-number\fR \fB-p\fR \fIprotocol-name\fR
      [\fB-e\fR \fIexec-mode\fR] [\fB-f\fR] [\fB-s\fR]
 .fi
 
@@ -109,24 +109,20 @@ algorithms that can be applied to IPsec traffic.
 The following protocols are predefined:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBIPSEC_PROTO_ESP\fR\fR
 .ad
 .RS 19n
-.rt  
 Defines the encryption algorithms (transforms) that can be used by IPsec to
 provide data confidentiality.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBIPSEC_PROTO_AH\fR\fR
 .ad
 .RS 19n
-.rt  
 Defines the authentication algorithms (transforms) that can be used by IPsec to
 provide authentication.
 .RE
@@ -162,12 +158,10 @@ option.
 \fBipsecalgs\fR supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 Adds an algorithm of the protocol specified by the \fB-P\fR option. The
 algorithm name(s) are specified with the \fB-n\fR option. The supported key
 lengths and block sizes are specified with the \fB-k\fR, \fB-i\fR, and \fB-b\fR
@@ -176,35 +170,29 @@ options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR\fR
 .ad
 .RS 6n
-.rt  
 Specifies the block or MAC lengths of an algorithm, in bytes. Set more than one
 block length by separating the values with commas.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
 .RS 6n
-.rt  
 Designates the execution mode of cryptographic requests for the specified
 protocol in the absence of cryptographic hardware provider. See
 \fBcryptoadm\fR(1M). \fIexec-mode\fR can be one of the following values:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsync\fR\fR
 .ad
 .RS 9n
-.rt  
 Cryptographic requests are processed synchronously in the absence of a
 cryptographic hardware provider. This execution mode leads to better latency
 when no cryptographic hardware providers are available
@@ -212,12 +200,10 @@ when no cryptographic hardware providers are available
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBasync\fR\fR
 .ad
 .RS 9n
-.rt  
 Cryptographic requests are always processed asynchronously in the absence of
 cryptographic hardware provider. This execution can improve the resource
 utilization on a multi-CPU system, but can lead to higher latency when no
@@ -231,24 +217,20 @@ mode is used in the absence of a cryptographic hardware provider.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 6n
-.rt  
 Used with the \fB-a\fR option to force the addition of an algorithm or protocol
 if an entry with the same name or number already exists.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 6n
-.rt  
 Specifies the valid key length increments in bits. This option must be used
 when the valid key lengths for an algorithm are specified by a range with the
 \fB-k\fR option.
@@ -256,12 +238,10 @@ when the valid key lengths for an algorithm are specified by a range with the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-K\fR\fR
 .ad
 .RS 6n
-.rt  
 Specifies the default key lengths for an algorithm, in bits. If the \fB-K\fR
 option is not specified, the minimum key length will be determined as follows:
 .RS +4
@@ -282,12 +262,10 @@ length will be the first listed key length.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR\fR
 .ad
 .RS 6n
-.rt  
 Specifies the supported key lengths for an algorithm, in bits. You can
 designate the supported key lengths by enumeration or by range.
 .sp
@@ -321,23 +299,19 @@ dash ('\fB-\fR') character, for example:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 6n
-.rt  
 Displays the kernel algorithm tables.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
 .RS 6n
-.rt  
 Specifies the name of the cryptographic framework mechanism name corresponding
 to the algorithm. Cryptographic framework mechanisms are described in the
 \fBcryptoadm\fR(1M) man page.
@@ -345,24 +319,20 @@ to the algorithm. Cryptographic framework mechanisms are described in the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-N\fR\fR
 .ad
 .RS 6n
-.rt  
 Specifies an algorithm number. The algorithm number for a protocol must be
 unique. IANA manages the algorithm numbers. See \fIRFC 2407\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 6n
-.rt  
 Specifies one or more names for an algorithm. When adding an algorithm with the
 \fB-a\fR option, \fIalg-names\fR contains a string or a comma-separated list of
 strings, for example:
@@ -380,12 +350,10 @@ contains one of the valid algorithm names.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR\fR
 .ad
 .RS 6n
-.rt  
 Adds a protocol of the number specified by \fIprotocol-number\fR with the name
 specified by the \fB-p\fR option. This option is also used to specify an IPsec
 protocol when used with the \fB-a\fR and the \fB-R\fR options. Protocol numbers
@@ -394,23 +362,19 @@ are managed by the IANA. See \fIRFC 2407\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 6n
-.rt  
 Specifies the name of the IPsec protocol.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR\fR
 .ad
 .RS 6n
-.rt  
 Removes and IPsec protocol from the algorithm table. The protocol can be
 specified by number by using the \fB-P\fR option or by name by using the
 \fB-p\fR option. The algorithms associated with the protocol are removed as
@@ -419,12 +383,10 @@ well.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 6n
-.rt  
 Removes the mapping for an algorithm The algorithm can be specified by
 algorithm number using the \fB-N\fR option or by algorithm name using the
 \fB-A\fR option.
@@ -432,12 +394,10 @@ algorithm number using the \fB-N\fR option or by algorithm name using the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 6n
-.rt  
 Synchronizes the kernel with the contents of \fB/etc/inet/ipsecalgs\fR. The
 contents of \fB/etc/inet/ipsecalgs\fR are always updated, but new information
 is not passed on to the kernel unless the \fB-s\fR is used. See \fBNOTES\fR for
@@ -493,7 +453,6 @@ example# \fBsvcadm refresh ipsecalgs\fR
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/ipsecalgs\fR\fR
 .ad
@@ -511,13 +470,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ipsecconf.1m b/usr/src/man/man1m/ipsecconf.1m
index 82e35ef191..5996a27093 100644
--- a/usr/src/man/man1m/ipsecconf.1m
+++ b/usr/src/man/man1m/ipsecconf.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ipsecconf 1M "28 Sep 2009" "SunOS 5.11" "System Administration Commands"
+.TH IPSECCONF 1M "Sep 28, 2009"
 .SH NAME
 ipsecconf \- configure system wide IPsec policy
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/ipsecconf\fR 
+\fB/usr/sbin/ipsecconf\fR
 .fi
 
 .LP
@@ -127,7 +127,6 @@ See \fBNOTES\fR for more information on managing IPsec security policy and
 \fBipsecconf\fR supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIfile\fR\fR
 .ad
@@ -154,7 +153,6 @@ not advisable to depend upon this feature.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIfile\fR\fR
 .ad
@@ -167,7 +165,6 @@ and when \fBsmf\fR(5) reports a configuration error. See \fBSECURITY\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIindex\fR\fR
 .ad
@@ -185,7 +182,6 @@ index.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIname\fR,\fIindex\fR\fR
 .ad
@@ -199,7 +195,6 @@ latching does not apply as it does in the host policy case. Equivalent to:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -211,7 +206,6 @@ option with respect to latching and host versus per-tunnel behavior.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fR
 .ad
@@ -222,7 +216,6 @@ Flush all policies on all tunnels and also flush all host policies.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIname\fR\fR
 .ad
@@ -234,7 +227,6 @@ Specify a tunnel interface name for use with the \fB-d\fR, \fB-f\fR, or
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
@@ -254,7 +246,6 @@ entries are listed separately.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR\fR
 .ad
@@ -269,7 +260,6 @@ interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -281,7 +271,6 @@ only be used with the \fB-l\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
@@ -354,13 +343,13 @@ The complete syntax of a policy entry is:
 .in +2
 .nf
 policy ::= { <pattern1> } <action1> { <properties1> } |
-     { <pattern2> } <action2> { <properties2> } 
+     { <pattern2> } <action2> { <properties2> }
      [ 'or' <action2> { <properties2>} ]*
 
      pattern1 ::=  <pattern_name_value_pair1>*
 
      pattern2 ::=  <pattern_name_value_pair2>*
- 
+
      action1 ::= apply | permit | bypass | pass
      action2 ::=  bypass | pass | drop | ipsec
 
@@ -371,7 +360,7 @@ policy ::= { <pattern1> } <action1> { <properties1> } |
      pattern_name_value_pair1 ::=
         saddr <address>/<prefix> |
         src  <address>/<prefix> |
-        srcaddr <address>/<prefix> |      
+        srcaddr <address>/<prefix> |
         smask <mask> |
         sport <port> |
         daddr <address>/<prefix> |
@@ -432,14 +421,14 @@ policy ::= { <pattern1> } <action1> { <properties1> } |
           sa <sa_val>
 
      auth_alg ::=  <auth_algname> ['(' <keylen> ')']
-     auth_algname ::= any | md5 | hmac-md5 | sha | sha1 | hmac-sha | 
-                      hmac-sha1 | hmac-sha256 | hmac-sha384 | 
+     auth_algname ::= any | md5 | hmac-md5 | sha | sha1 | hmac-sha |
+                      hmac-sha1 | hmac-sha256 | hmac-sha384 |
                       hmac-sha512 |<number>
 
      encr_alg ::= <encr_algname> ['(' <keylen> ')']
-     encr_algname ::= any | aes | aes-cbc | des | des-cbc | 3des | 
+     encr_algname ::= any | aes | aes-cbc | des | des-cbc | 3des |
                       3des-cbc | blowfish | blowfish-cbc | <number>
-     
+
      keylen ::= <number> | <number>'..' | '..'<number> | <number>'..' \e
      <number>
 
@@ -473,7 +462,6 @@ Policy entries may contain the following (name value) pairs in the
 policy entry.
 .sp
 .ne 2
-.mk
 .na
 \fBladdr/plen\fR
 .ad
@@ -496,7 +484,6 @@ be added for each of the addresses with other entries remaining the same.
 
 .sp
 .ne 2
-.mk
 .na
 \fBraddr/plen\fR
 .ad
@@ -519,7 +506,6 @@ will be added for each of the addresses with other entries remaining the same.
 
 .sp
 .ne 2
-.mk
 .na
 \fBsrc/plen\fR
 .ad
@@ -549,7 +535,6 @@ with other entries remaining the same.
 
 .sp
 .ne 2
-.mk
 .na
 \fBdaddr/plen\fR
 .ad
@@ -574,7 +559,6 @@ address-destination address pair will be added to the system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsmask\fR\fR
 .ad
@@ -595,7 +579,6 @@ For both IPv4 and IPv6 addresses, the same information can be specified as a
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdmask\fR\fR
 .ad
@@ -606,7 +589,6 @@ Analogous to \fIsmask.\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIlport\fR\fR
 .ad
@@ -619,7 +601,6 @@ getservbyname(3XNET)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIrport\fR\fR
 .ad
@@ -632,7 +613,6 @@ getservbyname(3XNET)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsport\fR\fR
 .ad
@@ -645,7 +625,6 @@ in \fBgetservbyname\fR(3XNET)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdport\fR\fR
 .ad
@@ -658,7 +637,6 @@ searched with \fBNULL\fR proto argument.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBproto\fR \fIulp\fR\fR
 .ad
@@ -674,7 +652,6 @@ all \fBicmp\fR rules.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtype\fR \fInum\fR or \fInum\fR-\fInum\fR\fR
 .ad
@@ -689,7 +666,6 @@ hyphen separating numbers.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcode\fR \fInum\fR or \fInum\fR-\fInum\fR\fR
 .ad
@@ -703,7 +679,6 @@ be present. A range of codes can be specified with a hyphen separating numbers.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtunnel\fR \fIname\fR\fR
 .ad
@@ -717,7 +692,6 @@ its policy entries disappear.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnegotiate\fR \fItunnel\fR\fR
 .ad
@@ -740,7 +714,6 @@ Policy entries may contain the following (name-value) pairs in the properties
 field. Each (name-value) pair may appear only once in a given policy entry.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBauth_algs\fR\fR
 .ad
@@ -755,7 +728,6 @@ on outbound datagrams and verified to be present on inbound datagrams. See
 This entry can contain either a string or a decimal number.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstring\fR\fR
 .ad
@@ -775,7 +747,6 @@ at this time for manual \fBSA\fRs and the key negotiating daemon for automatic
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnumber\fR\fR
 .ad
@@ -791,7 +762,6 @@ the outbound datagram, and the same will be verified for the inbound datagram.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBencr_algs\fR\fR
 .ad
@@ -807,7 +777,6 @@ This entry can contain either a string or a decimal number. Strings are not
 case-sensitive.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstring\fR\fR
 .ad
@@ -818,16 +787,14 @@ Can be one of the following:
 
 .sp
 .TS
-tab();
-cw(1.83i) cw(1.83i) cw(1.83i) 
-lw(1.83i) lw(1.83i) lw(1.83i) 
-.
-string value:Algorithm Used:See RFC:
+c c c
+l l l .
+string value:	Algorithm Used:	See RFC:
 _
-DES or DES-CBCDES-CBC2405
-3DES or 3DES-CBC3DES-CBC2451
-BLOWFISH or BLOWFISH-CBCBLOWFISH-CBC2451
-AES or AES-CBCAES-CBC2451
+DES or DES-CBC	DES-CBC	2405
+3DES or 3DES-CBC	3DES-CBC	2451
+BLOWFISH or BLOWFISH-CBC	BLOWFISH-CBC	2451
+AES or AES-CBC	AES-CBC	2451
 .TE
 
 You can use the \fBipsecalgs\fR(1M) command to obtain the complete list of
@@ -843,7 +810,6 @@ not case-sensitive.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnumber\fR\fR
 .ad
@@ -857,7 +823,6 @@ dynamically loaded.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBencr_auth_algs\fR\fR
 .ad
@@ -871,7 +836,6 @@ to be present on inbound datagrams. See \fIRFC 2406\fR. This entry can contain
 either a string or a number. Strings are case-insensitive.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstring\fR\fR
 .ad
@@ -882,7 +846,6 @@ Valid values are the same as the ones described for \fBauth_algs\fR above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnumber\fR\fR
 .ad
@@ -916,7 +879,6 @@ and/or maximum key lengths. Minimum or maximum lengths may be omitted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdir\fR\fR
 .ad
@@ -926,7 +888,6 @@ Values following this decides whether this entry is for outbound or inbound
 datagram. Valid values are strings that should be one of the following:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBout\fR\fR
 .ad
@@ -938,7 +899,6 @@ datagrams.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBin\fR\fR
 .ad
@@ -950,7 +910,6 @@ datagrams.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBboth\fR\fR
 .ad
@@ -967,7 +926,6 @@ if it is given while the action is "apply" or "permit", it should be "out" or
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsa\fR\fR
 .ad
@@ -982,7 +940,6 @@ determine whether a new \fBSA\fR will be used/obtained. Valid values are
 strings that could be one of the following:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunique\fR\fR
 .ad
@@ -1004,7 +961,6 @@ value of either IPv4-in-IP or IPv6-in-IP.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshared\fR\fR
 .ad
@@ -1027,7 +983,6 @@ Action follows the pattern and should be given before properties. It should be
 one of the following and this field is mandatory.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipsec\fR\fR
 .ad
@@ -1040,7 +995,6 @@ matched to incoming and outgoing datagrams.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBapply\fR\fR
 .ad
@@ -1053,7 +1007,6 @@ the outbound datagram.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpermit\fR\fR
 .ad
@@ -1067,7 +1020,6 @@ matched only for inbound datagrams.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbypass\fR\fR
 .ad
@@ -1086,7 +1038,6 @@ entry in the system. This has the highest precedence over any other entries.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdrop\fR\fR
 .ad
@@ -1385,10 +1336,10 @@ properties.
 .sp
 .in +2
 .nf
-{ 
-    laddr arachnid 
-    raddr spiderweb 
-    dir in 
+{
+    laddr arachnid
+    raddr spiderweb
+    dir in
 } ipsec {auth_algs any sa unique}
 .fi
 .in -2
@@ -1633,7 +1584,6 @@ C-prefix/24} ipsec {encr_algs aes encr_auth_algs md5}
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/run/ipsecpolicy.conf\fR\fR
 .ad
@@ -1645,7 +1595,6 @@ Cache of IPsec policies currently configured for the system, maintained by
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/ipsecinit.conf\fR\fR
 .ad
@@ -1657,7 +1606,6 @@ File containing IPsec policies to be installed at system restart by the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/ipsecinit.sample\fR\fR
 .ad
@@ -1674,13 +1622,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
@@ -1731,7 +1678,6 @@ IPsec\fR. 2001.
 .SH DIAGNOSTICS
 .sp
 .ne 2
-.mk
 .na
 \fBBad "string" on line \fIN\fR.\fR
 .ad
@@ -1749,7 +1695,6 @@ Address arguments.
 
 .sp
 .ne 2
-.mk
 .na
 \fBInterface name already selected\fR
 .ad
@@ -1760,7 +1705,6 @@ Dual use of \fB-i\fR \fIname\fR and \fIname\fR,\fIindex\fR for an index.
 
 .sp
 .ne 2
-.mk
 .na
 \fBError before or at line \fIN\fR.\fR
 .ad
@@ -1771,7 +1715,6 @@ Indicates parsing error before or at line \fIN\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBNon-existent index\fR
 .ad
@@ -1782,7 +1725,6 @@ Reported when the \fIindex\fR for delete is not a valid one.
 
 .sp
 .ne 2
-.mk
 .na
 \fBspd_msg return: File exists\fR
 .ad
diff --git a/usr/src/man/man1m/ipseckey.1m b/usr/src/man/man1m/ipseckey.1m
index e71db5203b..a76e99d9ab 100644
--- a/usr/src/man/man1m/ipseckey.1m
+++ b/usr/src/man/man1m/ipseckey.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ipseckey 1M "25 Sep 2008" "SunOS 5.11" "System Administration Commands"
+.TH IPSECKEY 1M "Sep 25, 2008"
 .SH NAME
 ipseckey \- manually manipulate an IPsec Security Association Database (SADB)
 .SH SYNOPSIS
@@ -83,7 +83,6 @@ the \fBSecurity\fR section for details on how to use this command securely.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR [\fIfilename\fR]\fR
 .ad
@@ -98,7 +97,6 @@ information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR [\fIfilename\fR]\fR
 .ad
@@ -112,7 +110,6 @@ generate files readable by the \fB-f\fR argument.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -125,7 +122,6 @@ otherwise unreachable.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
@@ -137,7 +133,6 @@ of an actual hexadecimal digit, print an \fBX\fR when this flag is turned on.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR [\fIfilename\fR]\fR
 .ad
@@ -153,7 +148,6 @@ addresses.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -166,7 +160,6 @@ raw seconds values for lifetimes.
 .SH COMMANDS
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadd\fR\fR
 .ad
@@ -181,7 +174,6 @@ extension-value pairs described below.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBupdate\fR\fR
 .ad
@@ -198,7 +190,6 @@ but normally is only used for \fBSA\fR lifetime updates.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBupdate-pair\fR\fR
 .ad
@@ -209,7 +200,6 @@ As update, but apply the update to the SA and its paired SA, if there is one.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelete\fR\fR
 .ad
@@ -224,7 +214,6 @@ updated to indicate that it is now unpaired.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelete-pair\fR\fR
 .ad
@@ -237,7 +226,6 @@ delete that SA too. This command requires the \fBspi\fR extension and the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBget\fR\fR
 .ad
@@ -249,7 +237,6 @@ Lookup and display a security association from a specific \fBSADB\fR. Like
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBflush\fR\fR
 .ad
@@ -260,7 +247,6 @@ Remove all \fBSA\fR for a given \fBSA_TYPE\fR, or all \fBSA\fR for all types.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmonitor\fR\fR
 .ad
@@ -273,7 +259,6 @@ socket would not receive to be received. See \fBpf_key\fR(7P).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpassive_monitor\fR\fR
 .ad
@@ -284,7 +269,6 @@ Like monitor, except that it does not use the \fBSADB_X_PROMISC\fR message.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpmonitor\fR\fR
 .ad
@@ -295,7 +279,6 @@ Synonym for \fBpassive_monitor\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdump\fR\fR
 .ad
@@ -309,7 +292,6 @@ or that this command will even complete.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsave\fR\fR
 .ad
@@ -322,7 +304,6 @@ provide a way to snapshot a particular \fBSA\fR type, for example, \fBesp\fR or
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhelp\fR\fR
 .ad
@@ -334,7 +315,6 @@ Prints a brief summary of commands.
 .SS "\fBSA_TYPE\fR"
 .sp
 .ne 2
-.mk
 .na
 \fB\fBall\fR\fR
 .ad
@@ -347,7 +327,6 @@ these commands.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBah\fR\fR
 .ad
@@ -358,7 +337,6 @@ Specifies the IPsec Authentication Header ("\fBAH\fR") \fBSA\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBesp\fR\fR
 .ad
@@ -381,7 +359,6 @@ hexadecimal number with a bit-length. Extensions are usually paired with
 values; however, some extensions require two values after them.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBspi \fI<number>\fR\fR\fR
 .ad
@@ -393,7 +370,6 @@ required for the \fBadd\fR, \fBdelete\fR, \fBget\fR and \fBupdate\fR commands.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpair-spi \fI<number>\fR\fR\fR
 .ad
@@ -414,7 +390,6 @@ failed, the SA to be added will instead be removed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinbound | outbound\fR\fR
 .ad
@@ -434,7 +409,6 @@ hash table in which the kernel should find the SA.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBreplay\fR \fI<number>\fR\fR
 .ad
@@ -448,7 +422,6 @@ commands.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBreplay_value\fR \fI<number>\fR\fR
 .ad
@@ -460,7 +433,6 @@ and \fBupdate\fR commands.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstate \fI<string>\fR|\fI<number>\fR\fR\fR
 .ad
@@ -474,7 +446,6 @@ specified, the value defaults to \fBmature\fR. This extension is used by the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBauth_alg \fI<string>\fR|\fI<number>\fR\fR\fR
 .ad
@@ -489,7 +460,6 @@ value, or by strings indicating an algorithm name. Current authentication
 algorithms include:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBHMAC-MD5\fR\fR
 .ad
@@ -500,7 +470,6 @@ algorithms include:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBHMAC-SH-1\fR\fR
 .ad
@@ -511,7 +480,6 @@ algorithms include:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBHMAC-SHA-256\fR\fR
 .ad
@@ -522,7 +490,6 @@ algorithms include:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBHMAC-SHA-384\fR\fR
 .ad
@@ -533,7 +500,6 @@ algorithms include:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBHMAC-SHA-512\fR\fR
 .ad
@@ -552,7 +518,6 @@ authentication algorithms.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBencr_alg \fI<string>\fR|\fI<number>\fR\fR\fR
 .ad
@@ -583,7 +548,6 @@ will be downgraded to \fBdying\fR from \fBmature\fR. See \fBpf_key\fR(7P). The
 messages.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBidle_addtime\fR \fI<number>\fR\fR
 .ad
@@ -601,7 +565,6 @@ the \fBadd\fR and \fBupdate\fR commands.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsoft_bytes \fI<number>\fR\fR\fR
 .ad
@@ -619,7 +582,6 @@ the \fBadd\fR and \fBupdate\fR commands.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsoft_addtime \fI<number>\fR\fR\fR
 .ad
@@ -639,7 +601,6 @@ and \fBupdate\fR commands.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsoft_usetime \fI<number>\fR\fR\fR
 .ad
@@ -657,7 +618,6 @@ extension is used by the \fBadd\fR and \fBupdate\fR commands.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsaddr \fIaddress\fR | \fIname\fR\fR\fR
 .ad
@@ -694,7 +654,6 @@ commands.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdaddr \fI<address>\fR|\fI<name>\fR\fR\fR
 .ad
@@ -737,7 +696,6 @@ identified by a name are used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsport\fR \fI<portnum>\fR\fR
 .ad
@@ -750,7 +708,6 @@ be.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdport\fR \fI<portnum>\fR\fR
 .ad
@@ -763,7 +720,6 @@ be.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBencap\fR \fI<protocol>\fR\fR
 .ad
@@ -776,7 +732,6 @@ for \fI<protocol>\fR currently is \fBudp\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBproto\fR \fI<protocol number>\fR\fR
 .ad
@@ -792,7 +747,6 @@ SA.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnat_loc\fR \fI<address>\fR|\fI<name>\fR\fR
 .ad
@@ -806,7 +760,6 @@ specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnat_rem\fR \fI<address>\fR|\fI<name>\fR\fR
 .ad
@@ -820,7 +773,6 @@ This address can match the SA's local address if there is a \fBnat_rport\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnat_lport\fR \fI<portnum>\fR\fR
 .ad
@@ -831,7 +783,6 @@ Identifies the local UDP port on which encapsulation of ESP occurs.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnat_rport\fR \fI<portnum>\fR\fR
 .ad
@@ -842,7 +793,6 @@ Identifies the remote UDP port on which encapsulation of ESP occurs.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBisrc\fR \fI<address>\fR | \fI<name>\fR[/\fI<prefix>\fR]\fR
 .ad
@@ -882,7 +832,6 @@ deprecated, remains.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBidst\fR \fI<address>\fR | \fI<name>\fR[/\fI<prefix>\fR]\fR
 .ad
@@ -911,7 +860,6 @@ IPv6-specific addresses or prefixes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinnersport\fR \fI<portnum>\fR\fR
 .ad
@@ -928,7 +876,6 @@ tunnel-mode SA. It should be used in combination with an upper-layer protocol
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinnerdport\fR \fI<portnum>\fR\fR
 .ad
@@ -945,7 +892,6 @@ a tunnel-mode SA. It should be used in combination with an upper-layer protocol
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBiproto\fR \fI<protocol number>\fR\fBiulp\fR \fI<protocol number>\fR\fR
 .ad
@@ -957,7 +903,6 @@ inner header of a tunnel-mode SA.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBauthkey \fI<hexstring>\fR\fR\fR
 .ad
@@ -974,7 +919,6 @@ commands.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBencrkey \fI<hexstring>\fR\fR\fR
 .ad
@@ -996,7 +940,6 @@ added \fBSA\fRs. Unlike other extensions, \fBsrcidtype\fR takes two values, a
 \fItype\fR, and an actual \fIvalue\fR. The type can be one of the following:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprefix\fR\fR
 .ad
@@ -1007,7 +950,6 @@ An address prefix.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfqdn\fR\fR
 .ad
@@ -1018,7 +960,6 @@ A fully-qualified domain name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdomain\fR\fR
 .ad
@@ -1029,7 +970,6 @@ Domain name, synonym for \fBfqdn\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBuser_fqdn\fR\fR
 .ad
@@ -1040,7 +980,6 @@ User identity of the form \fB\fIuser\fR@\fIfqdn\fR\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmailbox\fR\fR
 .ad
@@ -1055,7 +994,6 @@ The \fIvalue\fR is an arbitrary text string that should identify the
 certificate.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsrcidtype \fI<type, value>\fR\fR\fR
 .ad
@@ -1067,7 +1005,6 @@ used by the \fBadd\fR and \fBupdate\fR commands.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdstidtype \fI<type, value>\fR\fR\fR
 .ad
@@ -1454,7 +1391,7 @@ also needs to add both \fBSA\fRs.
 .sp
 .in +2
 .nf
-example# \fBipseckey\fR 
+example# \fBipseckey\fR
 ipseckey> \fBadd ah spi 0x2112 src you.domain.com dst me.domain.com \e
           authalg md5 authkey bde359723576fdea08e56cbe876e24ad \e
           hard_bytes 16000000\fR
@@ -1488,18 +1425,18 @@ example:
 .sp
 .in +2
 .nf
-# This is a sample file for flushing out the ESP table and 
-# adding a pair of SAs. 
+# This is a sample file for flushing out the ESP table and
+# adding a pair of SAs.
 
-flush esp 
+flush esp
 
-### Watch out!  I have keying material in this file.  See the 
-### SECURITY section in this manual page for why this can be 
+### Watch out!  I have keying material in this file.  See the
+### SECURITY section in this manual page for why this can be
 ### dangerous .
 
 add esp spi 0x2112 src me.domain.com dst you.domain.com \e
     authalg md5 authkey bde359723576fdea08e56cbe876e24ad \e
-    encralg des encrkey be02938e7def2839 hard_usetime 28800 
+    encralg des encrkey be02938e7def2839 hard_usetime 28800
 add esp spi 0x5150 src you.domain.com dst me.domain.com \e
     authalg md5 authkey 930987dbe09743ade09d92b4097d9e93 \e
     encralg des encrkey 8bd4a52e10127deb hard_usetime 28800
@@ -1545,7 +1482,6 @@ pair-spi 0x654321\fR
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/secret/ipseckeys\fR\fR
 .ad
@@ -1563,12 +1499,11 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
-Interface StabilityCommitted
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
@@ -1601,7 +1536,6 @@ If there are any errors in the configuration file, ipseckey reports the number
 of valid COMMANDS and the total number of COMMANDS parsed.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBParse error on line \fIN\fR.\fR\fR
 .ad
@@ -1616,7 +1550,6 @@ pinpoint in the configuration file the exact line that caused the error.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBUnexpected end of command line.\fR\fR
 .ad
@@ -1627,7 +1560,6 @@ An additional argument was expected on the command line.
 
 .sp
 .ne 2
-.mk
 .na
 \fBUnknown\fR
 .ad
@@ -1638,7 +1570,6 @@ A value for a specific extension was unknown.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBAddress type \fIN\fR not supported.\fR\fR
 .ad
@@ -1649,7 +1580,6 @@ A name-to-address lookup returned an unsupported address family.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fIN\fR is not a bit specifier\fR\fR
 .ad
@@ -1668,7 +1598,6 @@ Keying material was not entered appropriately.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCan only specify single\fR\fR
 .ad
@@ -1679,7 +1608,6 @@ A duplicate extension was entered.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDon't use extension for \fI<string>\fR for \fI<command>\fR\&.\fR\fR
 .ad
@@ -1690,7 +1618,6 @@ An extension not used by a command was used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBOne of the entered values is incorrect: Diagnostic code \fINN\fR:
 \fI<msg>\fR\fR\fR
diff --git a/usr/src/man/man1m/iscsiadm.1m b/usr/src/man/man1m/iscsiadm.1m
index e1e61604a7..781ce9f8d0 100644
--- a/usr/src/man/man1m/iscsiadm.1m
+++ b/usr/src/man/man1m/iscsiadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH iscsiadm 1M "16 Jul 2009" "SunOS 5.11" "System Administration Commands"
+.TH ISCSIADM 1M "Jul 16, 2009"
 .SH NAME
 iscsiadm \- enable management of iSCSI initiators
 .SH SYNOPSIS
@@ -37,45 +37,37 @@ The \fBiscsiadm\fR command supports the following subcommands, which are
 described in detail in subsections that follow:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadd\fR\fR
 .ad
 .RS 10n
-.rt  
 Adds element(s) to an object.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist\fR\fR
 .ad
 .RS 10n
-.rt  
 Lists element(s) of an object.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmodify\fR\fR
 .ad
 .RS 10n
-.rt  
 Modifies attributes of an object.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremove\fR\fR
 .ad
 .RS 10n
-.rt  
 Removes an element from an object.
 .RE
 
@@ -95,7 +87,7 @@ The syntax for the \fBadd\fR subcommand is:
 .sp
 .in +2
 .nf
-# iscsiadm add \fIdirect_object\fR [\fIoperands\fR...] 
+# iscsiadm add \fIdirect_object\fR [\fIoperands\fR...]
 .fi
 .in -2
 
@@ -104,7 +96,6 @@ The syntax for the \fBadd\fR subcommand is:
 The \fBadd\fR subcommand adds the following \fIdirect_object\fRs:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdiscovery-address\fR \fIdiscovery-address\fR [...]\fR
 .ad
@@ -131,7 +122,6 @@ If \fIport\fR is not specified, the default of 3260 will be used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBisns-server\fR \fIisns-server\fR [...]\fR
 .ad
@@ -159,7 +149,6 @@ If a port is not specified, the default of 3205 is used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstatic-config\fR \fIstatic_target\fR [...]\fR
 .ad
@@ -196,7 +185,6 @@ The syntax for the \fBlist\fR subcommand is:
 The \fBlist\fR subcommand displays data for the following \fIdirect-object\fRs:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdiscovery\fR\fR
 .ad
@@ -226,7 +214,6 @@ SendTargets
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinitiator-node\fR\fR
 .ad
@@ -241,7 +228,6 @@ parameter values that differ from the parameter values on the initiator node.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstatic-config\fR [\fIstatic_target\fR[, ...]]\fR
 .ad
@@ -253,7 +239,6 @@ targets are specified, all statically discovered targets.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtarget\fR [\fB-S\fR] [\fB-v\fR] [\fItarget\fR[, ...]]\fR
 .ad
@@ -308,7 +293,6 @@ remove target-param\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtarget-param\fR [\fB-v\fR] \fItarget\fR [...]\fR
 .ad
@@ -319,7 +303,6 @@ Lists a target's default and user-defined parameters.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdiscovery-address\fR [\fB-v\fR] [\fIdiscovery-address\fR[, ...]]\fR
 .ad
@@ -336,7 +319,6 @@ tags (TPGT), if applicable.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBisns-server\fR [\fB-v\fR] [\fIisns-server\fR[, ...]]\fR
 .ad
@@ -358,7 +340,7 @@ The syntax for the \fBmodify\fR subcommand is:
 .sp
 .in +2
 .nf
-# iscsiadm modify \fIdirect_object\fR [\fIoptions\fR] 
+# iscsiadm modify \fIdirect_object\fR [\fIoptions\fR]
 .fi
 .in -2
 
@@ -367,7 +349,6 @@ The syntax for the \fBmodify\fR subcommand is:
 The \fBmodify\fR subcommand supports the following \fIdirect_object\fRs:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdiscovery\fR [\fIoptions\fR]\fR
 .ad
@@ -380,7 +361,6 @@ targets that have already been discovered by that method.
 Options for \fBmodify discovery\fR are as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR, \fB-iSNS\fR \fBenable\fR | \fBdisable\fR\fR
 .ad
@@ -391,7 +371,6 @@ Enable or disable iSNS discovery.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR, \fB-\fR\fB-static\fR \fBenable\fR | \fBdisable\fR\fR
 .ad
@@ -402,7 +381,6 @@ Enable or disable static discovery.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB-\fR\fB-sendtargets\fR \fBenable\fR | \fBdisable\fR\fR
 .ad
@@ -415,7 +393,6 @@ Enable or disable SendTargets discovery.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinitiator-node\fR [\fIoptions\fR]\fR
 .ad
@@ -471,7 +448,6 @@ modify only the following initiator-node options:
 Options for \fBmodify initiator-node\fR are as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR, \fB-\fR\fB-node-alias\fR \fI<initiator node alias>\fR\fR
 .ad
@@ -482,7 +458,6 @@ Modifies the initiator node alias. Maximum length of 223 characters.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR, \fB-\fR\fB-authentication\fR \fBchap\fR | \fBnone\fR\fR
 .ad
@@ -493,7 +468,6 @@ Sets the authentication mode.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR, \fB-\fR\fB-CHAP-secret\fR\fR
 .ad
@@ -505,7 +479,6 @@ characters; minimum required length is 12 characters.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR, \fB--configured-sessions\fR \fI<num_sessions>\fR | \fI<IP
 address>\fR[,\fI<IP address>\fR\&...]\fR
@@ -519,7 +492,6 @@ multipathing feature described in \fBscsi_vhci\fR(7D).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR, \fB--datadigest\fR \fBnone\fR | \fBCRC32\fR\fR
 .ad
@@ -530,7 +502,6 @@ Sets whether CRC32 is enabled to check SCSI data transfers.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-H\fR, \fB-\fR\fB-CHAP-name\fR \fICHAP name\fR\fR
 .ad
@@ -544,7 +515,6 @@ CHAP username is displayed with the command \fBiscsiadm list initiator-node\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR, \fB--headerdigest\fR \fBnone\fR | \fBCRC32\fR\fR
 .ad
@@ -555,7 +525,6 @@ Sets whether CRC32 is enabled to check SCSI packet headers.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-N\fR, \fB-\fR\fB-node-name\fR \fI<initiator node name>\fR\fR
 .ad
@@ -574,7 +543,6 @@ iSCSI network.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR, \fB--radius-shared-secret\fR (exclusive)\fR
 .ad
@@ -585,7 +553,6 @@ Sets the RADIUS shared secret.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR, \fB--radius-access\fR \fBenable\fR | \fBdisable\fR\fR
 .ad
@@ -596,7 +563,6 @@ Sets whether a RADIUS server will be used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR, \fB--radius-server\fR \fI<IP address>\fR[:\fI<port>\fR]\fR
 .ad
@@ -607,7 +573,6 @@ Sets the IP address and port of the radius server to be used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR, \fB-\fR\fB-tunable-param\fR
 <<\fItunable-prop\fR>=<\fIvalue\fR>, ...>\fR
@@ -626,7 +591,6 @@ knowledge of the parameter's impact within the iSCSI network.
 Supported tunable-prop options are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrecv-login-rsp-timeout\fR\fR
 .ad
@@ -641,7 +605,6 @@ Valid value is from 0 to 60*60, default to 60 seconds.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconn-login-max\fR\fR
 .ad
@@ -656,7 +619,6 @@ given time window.  Valid value is from 0 to 60*60, default to 180 seconds.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpolling-login-delay\fR\fR
 .ad
@@ -675,7 +637,6 @@ Valid value is from 0 to 60*60, default to 60 seconds.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtarget-param\fR [\fIoptions\fR] \fItarget\fR\fR
 .ad
@@ -694,7 +655,6 @@ target-param\fR command on that target. The options \fB-C\fR and
 Options for \fBmodify target-param\fR are as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-B\fR, \fB-\fR\fB-bi-directional-authentication enable | disable\fR\fR
 .ad
@@ -706,7 +666,6 @@ bidirectional authentication for the specified target.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR, \fB-\fR\fB-CHAP-secret\fR\fR
 .ad
@@ -718,7 +677,6 @@ acceptable length is 16 characters.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR, \fB-\fR\fB-configured-sessions\fR \fI<num_sessions>\fR | \fI<IP
 address>\fR[,\fI<IP address>\fR\&...]\fR
@@ -732,7 +690,6 @@ multipathing feature described in \fBscsi_vhci\fR(7D).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR, \fB-\fR\fB-datadigest\fR \fBnone\fR | \fBCRC32\fR\fR
 .ad
@@ -743,7 +700,6 @@ Sets whether CRC32 is enabled or disabled for the data.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-H\fR, \fB-\fR\fB-CHAP-name\fR \fICHAP name\fR\fR
 .ad
@@ -758,7 +714,6 @@ the command \fBiscsiadm list initiator-node\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR, \fB-\fR\fB-headerdigest\fR \fBnone\fR | \fBCRC32\fR\fR
 .ad
@@ -769,7 +724,6 @@ Sets whether CRC32 is enabled or disabled for the header.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR, \fB-\fR\fB-login-param\fR\fR
 .ad
@@ -787,111 +741,91 @@ The login parameters are derived from iSCSI proposed standard RFC 3720. Valid
 values are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdataseqinorder\fR\fR
 .ad
 .RS 22n
-.rt  
 \fByes\fR or \fBno\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdefaulttime2retain\fR\fR
 .ad
 .RS 22n
-.rt  
 0-3600
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdefaulttime2wait\fR\fR
 .ad
 .RS 22n
-.rt  
 0-3600
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfirstburstlength\fR\fR
 .ad
 .RS 22n
-.rt  
 512 to 2^24-1
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBimmediatedata\fR\fR
 .ad
 .RS 22n
-.rt  
 \fByes\fR or \fBno\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinitialr2t\fR\fR
 .ad
 .RS 22n
-.rt  
 \fByes\fR or \fBno\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmaxburstlength\fR\fR
 .ad
 .RS 22n
-.rt  
 512 to 2^24-1
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdatapduinorder\fR\fR
 .ad
 .RS 22n
-.rt  
 \fByes\fR or \fBno\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmaxoutstandingr2t\fR\fR
 .ad
 .RS 22n
-.rt  
 1 to 65535
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmaxrecvdataseglen\fR\fR
 .ad
 .RS 22n
-.rt  
 512 to 2^24-1
 .RE
 
@@ -899,7 +833,6 @@ values are:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR, \fB-\fR\fB-tunable-param\fR
 <<\fItunable-prop\fR>=<\fIvalue\fR>, ...>\fR
@@ -918,7 +851,6 @@ knowledge of the parameter's impact within the iSCSI network.
 Supported \fItunable-prop\fR options are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrecv-login-rsp-timeout\fR\fR
 .ad
@@ -933,7 +865,6 @@ Valid value is from 0 to 60*60, default to 60 seconds.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconn-login-max\fR\fR
 .ad
@@ -948,7 +879,6 @@ given time window.  Valid value is from 0 to 60*60, default to 180 seconds.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpolling-login-delay\fR\fR
 .ad
@@ -972,7 +902,7 @@ The syntax for the \fBremove\fR subcommand is:
 .sp
 .in +2
 .nf
-# iscsiadm remove \fIdirect_object\fR 
+# iscsiadm remove \fIdirect_object\fR
 .fi
 .in -2
 
@@ -981,7 +911,6 @@ The syntax for the \fBremove\fR subcommand is:
 The \fBremove\fR subcommand supports the following \fIdirect_object\fRs:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdiscovery-address\fR \fIdiscovery-address\fR, ...\fR
 .ad
@@ -1009,7 +938,6 @@ There are no options associated with this direct object.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBisns-server\fR \fIisns-server\fR, ...\fR
 .ad
@@ -1037,7 +965,6 @@ There are no options associated with this direct object.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstatic-config\fR \fIstatic_target\fR, ...\fR
 .ad
@@ -1061,7 +988,6 @@ There are no options associated with this direct object.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtarget-param\fR \fItarget-name\fR\fR
 .ad
@@ -1092,23 +1018,19 @@ performance when communicating with the iSCSI target device.
 The following generic options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR, \fB-\fR\fB-version\fR\fR
 .ad
 .RS 17n
-.rt  
 Displays version information. Stops interpretation of subsequent arguments.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-?\fR, \fB-\fR\fB-help\fR\fR
 .ad
 .RS 17n
-.rt  
 Displays help information. Can be used following an \fBiscsiadm\fR command with
 no arguments, following a subcommand, or following a subcommand-direct object
 combination. Responds with help information appropriate for your entry. For
@@ -1438,13 +1360,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/isns.1m b/usr/src/man/man1m/isns.1m
index afe872a292..159cff834c 100644
--- a/usr/src/man/man1m/isns.1m
+++ b/usr/src/man/man1m/isns.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH isns 1M "8 Nov 2007" "SunOS 5.11" "System Administration Commands"
+.TH ISNS 1M "Nov 8, 2007"
 .SH NAME
 isns \- Internet Storage Name Service
 .SH SYNOPSIS
@@ -50,7 +50,6 @@ The service properties listed below can be managed using \fBsvccfg\fR(1M). The
 default value is assigned per RFC 4171 and implementation choice.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdata_store_location\fR\fR
 .ad
@@ -62,7 +61,6 @@ Configuration data store location. The default location is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBESI_retry_threshold_count\fR\fR
 .ad
@@ -73,7 +71,6 @@ Entity Status Inquiry retry threshold counter. The default count is \fB3\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBManagement_SCNs_Enabled\fR\fR
 .ad
@@ -85,7 +82,6 @@ enabled. The default is \fByes\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBAuthorized_Control_Nodes\fR\fR
 .ad
@@ -150,7 +146,6 @@ you to administer \fBisns\fR activity. These authorizations include the
 following \fBauth_attr\fR(4) privileges:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsolaris.isnsmgr.write\fR\fR
 .ad
@@ -163,7 +158,6 @@ domain or grouping of discovery domains in a discovery domain set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsolaris.smf.manage.isns\fR\fR
 .ad
@@ -174,7 +168,6 @@ Required to manage the \fBisns\fR server through  the \fBsmf\fR(5).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsolaris.smf.value.isns\fR\fR
 .ad
@@ -241,7 +234,6 @@ config/ESI_retry_threshold_count = 6\fR
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/sbin/isns\fR\fR
 .ad
@@ -258,13 +250,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStandard
+Interface Stability	Standard
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/isnsadm.1m b/usr/src/man/man1m/isnsadm.1m
index 70856e1b2f..0aee600d1d 100644
--- a/usr/src/man/man1m/isnsadm.1m
+++ b/usr/src/man/man1m/isnsadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH isnsadm 1M "25 Sep 2008" "SunOS 5.11" "System Administration Commands"
+.TH ISNSADM 1M "Sep 25, 2008"
 .SH NAME
 isnsadm \- administer the internet Storage Name Server (iSNS) server
 .SH SYNOPSIS
@@ -40,7 +40,6 @@ described in the context of each subcommand description.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-?\fR, \fB--help\fR\fR
 .ad
@@ -51,7 +50,6 @@ Displays context help. Stops interpretation of any subsequent arguments.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR, \fB--version\fR\fR
 .ad
@@ -67,7 +65,6 @@ arguments.
 The following operands are used by one or more \fBisnsadm\fR subcommands.
 .sp
 .ne 2
-.mk
 .na
 \fB\fIiscsi-node-name\fR\fR
 .ad
@@ -79,7 +76,6 @@ of 223 characters.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdiscovery-domain-name\fR\fR
 .ad
@@ -91,7 +87,6 @@ characters.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdiscovery-domain-set-name\fR\fR
 .ad
@@ -125,7 +120,6 @@ The \fBadd-dd\fR subcommand has the following syntax:
 \fBadd-dd\fR has the following option:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIdiscovery-domain-set-name\fR\fR
 .ad
@@ -154,7 +148,6 @@ The \fBadd-node\fR subcommand has the following syntax:
 \fBadd-node\fR has the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR,\fB--dd\fR \fIdiscovery-domain-name\fR\fR
 .ad
@@ -297,7 +290,6 @@ The \fBlist-dd\fR subcommand has the following syntax:
 \fBlist-dd\fR supports the following option:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR, \fB--verbose\fR\fR
 .ad
@@ -329,7 +321,6 @@ The \fBlist-dd-set\fR subcommand has the following syntax:
 \fBlist-dd-set\fR supports the following option:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR, \fB--verbose\fR\fR
 .ad
@@ -362,7 +353,6 @@ The \fBlist-node\fR subcommand has the following syntax:
 \fBlist-node\fR supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--target\fR\fR
 .ad
@@ -373,7 +363,6 @@ Filters the list to display only iSCSI target nodes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR, \fB--initiator\fR\fR
 .ad
@@ -384,7 +373,6 @@ Filters the list to display only iSCSI initiator nodes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR, \fB--verbose\fR\fR
 .ad
@@ -415,7 +403,6 @@ The \fBmodify-dd\fR subcommand has the following syntax:
 \fBmodify-dd\fR has the following option:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fIdiscovery-domain-name\fR\fR
 .ad
@@ -445,7 +432,6 @@ The \fBmodify-dd-set\fR subcommand has the following syntax:
 \fBmodify-dd-set\fR has the following option:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fIdiscovery-domain-set-name\fR\fR
 .ad
@@ -476,13 +462,12 @@ The \fBremove-dd\fR subcommand has the following syntax:
 \fBremove-dd\fR has the following option:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIdiscovery-domain-set-name\fR\fR
 .ad
 .sp .6
 .RS 4n
-Specifies the discovery domain set from which the discovery domain will 	be
+Specifies the discovery domain set from which the discovery domain will be
 removed.
 .RE
 
@@ -506,7 +491,6 @@ The \fBremove-node\fR subcommand has the following syntax:
 \fBremove-node\fR has the following option:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdiscovery-domain-name\fR\fR
 .ad
@@ -556,7 +540,7 @@ iSCSI Name: iqn.1986-03.com.sun:01:000e0c9f10da.45173FEA.engr
                 Portal Group: 1
         DD Name: Default
 iSCSI Name: iqn.1986-03.com.sun:01:000e0c9f10da.454F00A2.acct
-        Alias: 
+        Alias:
         Type: Target
         Network Entity: SE5310
         Portal: 172.20.57.95:3260
@@ -756,13 +740,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityVolatile
+Interface Stability	Volatile
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/itadm.1m b/usr/src/man/man1m/itadm.1m
index 81f9df9bd2..12a3e7ea0f 100644
--- a/usr/src/man/man1m/itadm.1m
+++ b/usr/src/man/man1m/itadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH itadm 1M "4 Aug 2009" "SunOS 5.11" "System Administration Commands"
+.TH ITADM 1M "Aug 4, 2009"
 .SH NAME
 itadm \- administer iSCSI targets
 .SH SYNOPSIS
@@ -174,7 +174,6 @@ itadm create-target [-a,--auth-method radius | chap | none | default]
 Create a iSCSI target with the specified options. Options are as follows.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR,\fB--auth-method\fR \fBradius | chap | none | default\fR\fR
 .ad
@@ -193,7 +192,6 @@ global setting of this property.  (See the \fBmodify-defaults\fR subcommand.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR,\fB--chap-secret\fR\fR
 .ad
@@ -206,7 +204,6 @@ for this property. Maximum length is 255 characters; minimum required length is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR,\fB--chap-secret-file\fR \fIpath\fR\fR
 .ad
@@ -218,7 +215,6 @@ Path to a temporary file containing the CHAP secret as described in the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR,\fB--chap-user\fR \fIchap-user-name\fR\fR
 .ad
@@ -233,7 +229,6 @@ If no value is specified then the target node name is used as the username. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR,\fB--node-name\fR \fItarget_node_name\fR\fR
 .ad
@@ -245,7 +240,6 @@ IQN or EUI format (see RFC 3720). This option establishes that name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR,\fB--alias\fR \fIalias\fR\fR
 .ad
@@ -257,7 +251,6 @@ need to be unique.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR,\fB--tpg\fR \fItpg-name\fR[,\fItpg-name\fR,...]\fR
 .ad
@@ -287,7 +280,6 @@ Modify an iSCSI target according to the specified options. Options are as
 follows.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR,\fB--auth-method\fR \fBradius | chap | none | default\fR\fR
 .ad
@@ -298,7 +290,6 @@ As described under the \fBcreate-target\fR subcommand, above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR,\fB--chap-secret\fR\fR
 .ad
@@ -309,7 +300,6 @@ As described under the \fBcreate-target\fR subcommand, above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR,\fB--chap-secret-file\fR \fIpath\fR\fR
 .ad
@@ -320,7 +310,6 @@ As described under the \fBcreate-target\fR subcommand, above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR,\fB--chap-user\fR \fIchap-user-name\fR\fR
 .ad
@@ -332,7 +321,6 @@ explicitly set CHAP username use \fB-u\fR \fBnone\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR,\fB--node-name\fR \fItarget_node_name\fR\fR
 .ad
@@ -344,7 +332,6 @@ Renames the target. See also the description of \fB-n\fR under the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR,\fB--alias\fR \fIalias\fR\fR
 .ad
@@ -356,7 +343,6 @@ explicitly set alias use \fB-l\fR \fBnone\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR,\fB--tpg\fR \fItpg-name\fR[,\fItpg-name\fR,...]\fR
 .ad
@@ -380,7 +366,6 @@ List information about the configured targets. If \fItarget_node_name\fR is
 specified, list only the information for that target. Option is as follows.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR,\fB--verbose\fR\fR
 .ad
@@ -404,7 +389,6 @@ Delete the target specified by \fItarget_node_name\fR. The target must be
 \fBoffline\fR before it can be deleted. Option is as follows.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR,\fB--force\fR\fR
 .ad
@@ -449,7 +433,6 @@ specified then list only the information about the target portal group
 associated with that \fItpg_name\fR. Option is as follows.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR,\fB--verbose\fR\fR
 .ad
@@ -473,7 +456,6 @@ Delete the target portal group associated with \fItpg_name\fR. Option is as
 follows.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR,\fB--force\fR\fR
 .ad
@@ -499,7 +481,6 @@ Configure parameters associated with the remote initiator named
 \fIinitiator_node_name\fR. Options are as follows.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR,\fB--chap-secret\fR\fR
 .ad
@@ -510,7 +491,6 @@ As described under the \fBcreate-target\fR subcommand, above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR,\fB--chap-secret-file\fR \fIpath\fR\fR
 .ad
@@ -521,7 +501,6 @@ As described under the \fBcreate-target\fR subcommand, above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR,\fB--chap-user\fR \fIchap-user-name\fR\fR
 .ad
@@ -547,7 +526,6 @@ Modify parameters associated with the remote initiator named
 \fIinitiator_node_name\fR. Options are as follows.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR,\fB--chap-secret\fR\fR
 .ad
@@ -558,7 +536,6 @@ As described under the \fBcreate-target\fR subcommand, above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR,\fB--chap-secret-file\fR \fIpath\fR\fR
 .ad
@@ -569,7 +546,6 @@ As described under the \fBcreate-target\fR subcommand, above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR,\fB--chap-user\fR \fIchap-user-name\fR\fR
 .ad
@@ -607,7 +583,6 @@ List parameters associated with the initiator named \fIinitiator_node_name\fR.
 Option is as follows.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR,\fB--verbose\fR\fR
 .ad
@@ -633,7 +608,6 @@ itadm modify-defaults [\fB-a\fR,\fB--auth-method\fR radius | chap | none]
 Modify default parameters. Options are as follows.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR,\fB--auth-method\fR \fBradius | chap | none\fR\fR
 .ad
@@ -653,7 +627,6 @@ override this global setting using the \fB-a\fR option of the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR,\fB--radius-secret\fR\fR
 .ad
@@ -664,7 +637,6 @@ RADIUS Shared Secret for centralized CHAP authentication.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR,\fB--radius-secret-file\fR \fIpath\fR\fR
 .ad
@@ -676,7 +648,6 @@ Path to a temporary file containing the CHAP secret as described in the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR,\fB--sns\fR \fBenable | disable\fR\fR
 .ad
@@ -688,7 +659,6 @@ Name Service (iSNS) servers.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR,\fB--isns-server\fR
 \fIIP-address\fR[:\fIport\fR][,\fIIP-address\fR[:\fIport\fR],...]\fR
@@ -703,7 +673,6 @@ eight iSNS servers can be specified. To remove all iSNS servers, use \fB-I\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR,\fB--radius-server\fR \fIIP-address\fR[:\fIport\fR]\fR
 .ad
@@ -960,13 +929,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/itu.1m b/usr/src/man/man1m/itu.1m
index 8399be9bef..6b4d2ea70a 100644
--- a/usr/src/man/man1m/itu.1m
+++ b/usr/src/man/man1m/itu.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH itu 1M "23 Sep 2009" "SunOS 5.11" "System Administration Commands"
+.TH ITU 1M "Sep 23, 2009"
 .SH NAME
 itu \- convert packages to Driver Update format and patch Solaris install media
 for Install Time Update
@@ -38,7 +38,6 @@ patches a Solaris install media with driver packages for Install Time Update
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIoutput_dir\fR\fR
 .ad
@@ -49,7 +48,6 @@ Directory where the Driver Update directory is to be created.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -61,7 +59,6 @@ asking first.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIiso_label\fR\fR
 .ad
@@ -72,7 +69,6 @@ Label/volume name of the ISO image (if \fB-o\fR option is specified).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIiso_file\fR\fR
 .ad
@@ -85,7 +81,6 @@ for subcommand \fBmakeiso\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fImedia_root\fR\fR
 .ad
@@ -97,7 +92,6 @@ must be specified for subcommand \fBupdatemedia\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIsolaris_release\fR\fR
 .ad
@@ -110,7 +104,6 @@ option must be specified for subcommand \fBmakedu\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -204,7 +197,6 @@ be writable. If necessary, first save a copy, prior to running this subcommand.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpackage\fR [\fIpackage\fR...]\fR
 .ad
@@ -215,7 +207,6 @@ One or more driver packages.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpkg\fR [\fIpkg\fR...]\fR
 .ad
@@ -226,7 +217,6 @@ One or more packages.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fImedia_root\fR\fR
 .ad
@@ -313,13 +303,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/k5srvutil.1m b/usr/src/man/man1m/k5srvutil.1m
index 8102ae221d..bc459ef755 100644
--- a/usr/src/man/man1m/k5srvutil.1m
+++ b/usr/src/man/man1m/k5srvutil.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH k5srvutil 1M "29 Aug 2006" "SunOS 5.11" "System Administration Commands"
+.TH K5SRVUTIL 1M "Aug 29, 2006"
 .SH NAME
 k5srvutil \- host key table (keytab) manipulation utility
 .SH SYNOPSIS
@@ -22,23 +22,19 @@ currently in his keytab or to add new keys to the keytab.
 The operand \fIoperation\fR must be one of the following:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist\fR\fR
 .ad
 .RS 10n
-.rt  
 Lists the keys in a keytab, showing version number and principal name.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBchange\fR\fR
 .ad
 .RS 10n
-.rt  
 Changes all the keys in the keytab to new randomly-generated keys, updating the
 keys in the Kerberos server's database to match those by using the \fBkadmin\fR
 protocol. If a key's version number does not match the version number stored in
@@ -50,12 +46,10 @@ the \fB-k\fR option is used, the old and new keys are displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelold\fR\fR
 .ad
 .RS 10n
-.rt  
 Deletes keys that are not the most recent version from the keytab. This
 operation should be used at some point after a change operation to remove old
 keys. If the \fB-i\fR flag is specified, \fBk5srvutil\fR asks the user whether
@@ -64,12 +58,10 @@ the old keys associated with each principal should be removed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelete\fR\fR
 .ad
 .RS 10n
-.rt  
 Deletes particular keys in the keytab, interactively prompting for each key.
 .RE
 
@@ -87,35 +79,29 @@ However, old keys are retained, so they are available in case of failure.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfilename\fR\fR
 .ad
 .RS 15n
-.rt  
 Specify a keytab file other than the default file, \fB/etc/krb5.keytab\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 15n
-.rt  
 Prompts user before changing keys when using the \fBchange\fR or \fBdelold\fR
 operands.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR\fR
 .ad
 .RS 15n
-.rt  
 Displays old and new keys when using the \fBchange\fR operand.
 .RE
 
@@ -127,13 +113,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/kadb.1m b/usr/src/man/man1m/kadb.1m
index 44831122e4..eb60061636 100644
--- a/usr/src/man/man1m/kadb.1m
+++ b/usr/src/man/man1m/kadb.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH kadb 1M "2 Jul 2004" "SunOS 5.11" "System Administration Commands"
+.TH KADB 1M "Jul 2, 2004"
 .SH NAME
 kadb \- a kernel debugger
 .SH SYNOPSIS
@@ -45,7 +45,6 @@ This section briefly lists the major differences between \fBkadb\fR and
 \fBkmdb\fR. It is not intended to be exhaustive.
 .sp
 .ne 2
-.mk
 .na
 \fBDebugger Loading and Unloading\fR
 .ad
@@ -59,7 +58,6 @@ unloaded.
 
 .sp
 .ne 2
-.mk
 .na
 \fBmdb Feature Set\fR
 .ad
@@ -83,7 +81,6 @@ man page. A description as well as examples can be found in the \fISolaris
 Modular Debugger Guide\fR.
 .sp
 .ne 2
-.mk
 .na
 \fBDeferred Breakpoints\fR
 .ad
@@ -95,7 +92,6 @@ Instead, use "::bp module`symbol".
 
 .sp
 .ne 2
-.mk
 .na
 \fBWatchpoints\fR
 .ad
@@ -110,7 +106,6 @@ specified for each watchpoint created.
 
 .sp
 .ne 2
-.mk
 .na
 \fBAccess to I/O Ports (x86 only)\fR
 .ad
diff --git a/usr/src/man/man1m/kadmin.1m b/usr/src/man/man1m/kadmin.1m
index efbc5eb087..bb11298ce8 100644
--- a/usr/src/man/man1m/kadmin.1m
+++ b/usr/src/man/man1m/kadmin.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH kadmin 1M "29 Feb 2008" "SunOS 5.11" "System Administration Commands"
+.TH KADMIN 1M "Feb 29, 2008"
 .SH NAME
 kadmin, kadmin.local \- Kerberos database administration program
 .SH SYNOPSIS
@@ -67,7 +67,6 @@ than prompting for a password. The \fB-m\fR option will bypass the
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcredentials_cache\fR\fR
 .ad
@@ -81,7 +80,6 @@ ticket from the KDC, and stores it in its own temporary credentials cache.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdbname\fR\fR
 .ad
@@ -92,7 +90,6 @@ Specify a non-standard database name. [Local only]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
@@ -103,7 +100,6 @@ Turn on debug mode. [Local only]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fI"enc:salt ..."\fR\fR
 .ad
@@ -114,7 +110,6 @@ Specify a different encryption type and/or key salt. [Local only]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR [\fB-t\fR \fIkeytab\fR]\fR
 .ad
@@ -128,7 +123,6 @@ for keytab maintenance.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
@@ -140,7 +134,6 @@ Accept the database master password from the keyboard rather than using the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIprincipal\fR\fR
 .ad
@@ -154,7 +147,6 @@ the username as obtained with \fBgetpwuid\fR, in that order of preference.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR \fIquery\fR\fR
 .ad
@@ -166,7 +158,6 @@ then exit. This can be useful for writing scripts.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrealm\fR\fR
 .ad
@@ -177,7 +168,6 @@ Use \fIrealm\fR as the default database realm.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIadmin_server\fR[\fI:port\fR]\fR
 .ad
@@ -190,7 +180,6 @@ client.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR \fIpassword\fR\fR
 .ad
@@ -204,7 +193,6 @@ arguments of this command through \fBps\fR(1).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fIdb_args\fR\fR
 .ad
@@ -214,7 +202,6 @@ Pass database-specific arguments to \fBkadmin\fR. Supported arguments are for
 LDAP and the \fBBerkeley-db2\fR plug-in. These arguments are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbinddn\fR=\fIbinddn\fR\fR
 .ad
@@ -226,7 +213,6 @@ LDAP simple bind DN for authorization on the directory server. Overrides the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbindpwd\fR=\fIbindpwd\fR\fR
 .ad
@@ -237,7 +223,6 @@ Bind password.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdbname\fR=\fIname\fR\fR
 .ad
@@ -248,7 +233,6 @@ For the \fBBerkeley-db2\fR plug-in, specifies a name for the Kerberos database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnconns\fR=\fInum\fR\fR
 .ad
@@ -259,7 +243,6 @@ Maximum number of server connections.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBport\fR=\fInum\fR\fR
 .ad
@@ -273,7 +256,6 @@ Directory server connection port.
 .SH COMMANDS
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist_requests\fR\fR
 .ad
@@ -285,7 +267,6 @@ Lists all the commands available for \fBkadmin\fR. Aliased by \fBlr\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBget_privs\fR\fR
 .ad
@@ -298,7 +279,6 @@ that is currently running \fBkadmin\fR. The privileges are based on the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fBadd_principal\fR \fB[\fIoptions\fR]\fR \fB\fInewprinc\fR\fR\fR
 .ad
@@ -314,7 +294,6 @@ can be suppressed with the \fB-clearpolicy\fR option. This command requires the
 \fBadd\fR privilege. Aliased by \fBaddprinc\fR and \fBank\fR. The options are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-expire\fR \fIexpdate\fR\fR
 .ad
@@ -326,7 +305,6 @@ the valid absolute time formats that you can specify for \fIexpdate\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-pwexpire\fR \fIpwexpdate\fR\fR
 .ad
@@ -338,7 +316,6 @@ valid absolute time formats that you can specify for \fIpwexpdate\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-maxlife\fR \fImaxlife\fR\fR
 .ad
@@ -350,7 +327,6 @@ for the valid time duration formats that you can specify for \fImaxlife\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-maxrenewlife\fR \fImaxrenewlife\fR\fR
 .ad
@@ -363,7 +339,6 @@ for \fImaxrenewlife\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-kvno\fR \fIkvno\fR\fR
 .ad
@@ -374,7 +349,6 @@ Explicitly set the key version number.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-policy\fR \fIpolicy\fR\fR
 .ad
@@ -389,7 +363,6 @@ policy or the \fBdefault\fR policy.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-clearpolicy\fR\fR
 .ad
@@ -402,7 +375,6 @@ policy does not exist.
 
 .sp
 .ne 2
-.mk
 .na
 \fB{\fB-\fR|\fB+\fR}\fBallow_postdated\fR\fR
 .ad
@@ -415,7 +387,6 @@ tickets. (Sets the \fBKRB5_KDB_DISALLOW_POSTDATED\fR flag.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB{\fB-\fR|\fB+\fR}\fBallow_forwardable\fR\fR
 .ad
@@ -428,7 +399,6 @@ tickets. (Sets the \fBKRB5_KDB_DISALLOW_FORWARDABLE\fR flag.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB{\fB-\fR|\fB+\fR}\fBallow_renewable\fR\fR
 .ad
@@ -441,7 +411,6 @@ tickets. (Sets the \fBKRB5_KDB_DISALLOW_RENEWABLE\fR flag.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB{\fB-\fR|\fB+\fR}\fBallow_proxiable\fR\fR
 .ad
@@ -454,7 +423,6 @@ tickets. (Sets the \fBKRB5_KDB_DISALLOW_PROXIABLE\fR flag.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB{\fB-\fR|\fB+\fR}\fBallow_dup_skey\fR\fR
 .ad
@@ -468,7 +436,6 @@ flag.
 
 .sp
 .ne 2
-.mk
 .na
 \fB{\fB-\fR|\fB+\fR}\fBrequires_preauth\fR\fR
 .ad
@@ -481,7 +448,6 @@ allowed to \fBkinit\fR. (Sets the \fBKRB5_KDB_REQUIRES_PRE_AUTH\fR flag.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB{\fB-\fR|\fB+\fR}\fBrequires_hwauth\fR\fR
 .ad
@@ -494,7 +460,6 @@ hardware device before being allowed to kinit. (Sets the
 
 .sp
 .ne 2
-.mk
 .na
 \fB{\fB-\fR|\fB+\fR}\fBallow_svr\fR\fR
 .ad
@@ -506,7 +471,6 @@ hardware device before being allowed to kinit. (Sets the
 
 .sp
 .ne 2
-.mk
 .na
 \fB{\fB-\fR|\fB+\fR}\fBallow_tgs_req\fR\fR
 .ad
@@ -521,7 +485,6 @@ most things. \fB+allow_tgs_req\fR clears this flag. The default is
 
 .sp
 .ne 2
-.mk
 .na
 \fB{\fB-\fR|\fB+\fR}\fBallow_tix\fR\fR
 .ad
@@ -535,7 +498,6 @@ in the database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB{\fB-\fR|\fB+\fR}\fBneedchange\fR\fR
 .ad
@@ -549,7 +511,6 @@ principal in the database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB{\fB-\fR|\fB+\fR}\fBpassword_changing_service\fR\fR
 .ad
@@ -565,7 +526,6 @@ on the principal in the database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-randkey\fR\fR
 .ad
@@ -576,7 +536,6 @@ Sets the key of the principal to a random value.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-pw\fR \fB\fIpassword\fR\fR\fR
 .ad
@@ -589,7 +548,6 @@ unauthorized users gain read access to the script.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR "enc:salt ..."\fR
 .ad
@@ -606,7 +564,6 @@ des-cbc-crc:normal.
 
 .sp
 .ne 2
-.mk
 .na
 \fBExample:\fR
 .ad
@@ -616,11 +573,11 @@ des-cbc-crc:normal.
 .in +2
 .nf
 kadmin: \fBaddprinc tlyu/admin\fR
-WARNING: no policy specified for "tlyu/admin@ACME.COM"; 
+WARNING: no policy specified for "tlyu/admin@ACME.COM";
 defaulting to no policy.
 Enter password for principal tlyu/admin@ACME.COM:
 Re-enter password for principal tlyu/admin@ACME.COM:
-Principal "tlyu/admin@ACME.COM" created. 
+Principal "tlyu/admin@ACME.COM" created.
 kadmin:
 .fi
 .in -2
@@ -630,7 +587,6 @@ kadmin:
 
 .sp
 .ne 2
-.mk
 .na
 \fBErrors:\fR
 .ad
@@ -651,7 +607,6 @@ kadmin:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelete_principal\fR [\fB-force\fR] \fIprincipal\fR\fR
 .ad
@@ -662,7 +617,6 @@ deletion, unless the \fB-force\fR option is given. This command requires the
 \fBdelete\fR privilege. Aliased by \fBdelprinc\fR.
 .sp
 .ne 2
-.mk
 .na
 \fBExample:\fR
 .ad
@@ -673,7 +627,7 @@ deletion, unless the \fB-force\fR option is given. This command requires the
 .nf
 kadmin: \fBdelprinc mwm_user\fR
 Are you sure you want to delete the principal
-"mwm_user@ACME.COM"? (yes/no): \fByes\fR 
+"mwm_user@ACME.COM"? (yes/no): \fByes\fR
 Principal "mwm_user@ACME.COM" deleted.
 Make sure that you have removed this principal from
 all kadmind ACLs before reusing.
@@ -686,7 +640,6 @@ kadmin:
 
 .sp
 .ne 2
-.mk
 .na
 \fBErrors:\fR
 .ad
@@ -701,7 +654,6 @@ kadmin:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmodify_principal\fR [\fIoptions\fR] \fIprincipal\fR\fR
 .ad
@@ -714,7 +666,6 @@ clear the current policy of a principal. This command requires the \fBmodify\fR
 privilege. Aliased by \fBmodprinc\fR.
 .sp
 .ne 2
-.mk
 .na
 \fBErrors:\fR
 .ad
@@ -733,7 +684,6 @@ privilege. Aliased by \fBmodprinc\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBchange_password\fR [\fIoptions\fR] \fIprincipal\fR\fR
 .ad
@@ -745,7 +695,6 @@ privilege, or that the principal that is running the program to be the same as
 the one changed. Aliased by \fBcpw\fR. The following options are available:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-randkey\fR\fR
 .ad
@@ -756,7 +705,6 @@ Sets the key of the principal to a random value.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-pw\fR \fIpassword\fR\fR
 .ad
@@ -767,7 +715,6 @@ Sets the password to the specified string. Not recommended.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR "enc:salt ..."\fR
 .ad
@@ -781,7 +728,6 @@ enctype and same salttype in the list will be used to set the new key(s).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-keepold\fR\fR
 .ad
@@ -794,7 +740,6 @@ will allow existing valid TGTs to continue to work.
 
 .sp
 .ne 2
-.mk
 .na
 \fBExample:\fR
 .ad
@@ -816,7 +761,6 @@ kadmin:
 
 .sp
 .ne 2
-.mk
 .na
 \fBErrors:\fR
 .ad
@@ -837,7 +781,6 @@ kadmin:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBget_principal\fR [\fB-terse\fR] \fIprincipal\fR\fR
 .ad
@@ -849,7 +792,6 @@ being listed. With the \fB-terse\fR option, outputs fields as quoted
 tab-separated strings. Aliased by \fBgetprinc\fR.
 .sp
 .ne 2
-.mk
 .na
 \fBExamples:\fR
 .ad
@@ -877,8 +819,8 @@ Key: vno 2, ArcFour with HMAC/md5, no salt
 Key: vno 2, DES cbc mode with RSA-MD5, no salt
 Attributes: REQUIRES_PRE_AUTH
 Policy: [none]
-kadmin: \fBgetprinc -terse tlyu/admin\fR 
-"tlyu/admin@ACME.COM"   0       1199359066      0       2147483647      
+kadmin: \fBgetprinc -terse tlyu/admin\fR
+"tlyu/admin@ACME.COM"   0       1199359066      0       2147483647
 "root/admin@ACME.COM"   1199359066      128     2       0       "[none]"       21474836
 47      0       0       0       5       1       2       18      0       1      2
 17      0       1       2       16      0       1       2       23      0      12
@@ -892,7 +834,6 @@ kadmin:
 
 .sp
 .ne 2
-.mk
 .na
 \fBErrors:\fR
 .ad
@@ -907,7 +848,6 @@ kadmin:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist_principals\fR [\fIexpression\fR]\fR
 .ad
@@ -922,7 +862,6 @@ the expression. Requires the \fBlist\fR privilege. Aliased by \fBlistprincs\fR,
 \fBget_principals\fR, and \fBgetprincs\fR.
 .sp
 .ne 2
-.mk
 .na
 \fBExamples:\fR
 .ad
@@ -947,7 +886,6 @@ kadmin:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadd_policy\fR [\fIoptions\fR] \fIpolicy\fR\fR
 .ad
@@ -957,7 +895,6 @@ Adds the named policy to the policy database. Requires the \fBadd\fR privilege.
 Aliased by \fBaddpol\fR. The following options are available:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-maxlife\fR \fImaxlife\fR\fR
 .ad
@@ -970,7 +907,6 @@ section for the valid time duration formats that you can specify for
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-minlife\fR \fIminlife\fR\fR
 .ad
@@ -983,7 +919,6 @@ section for the valid time duration formats that you can specify for
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-minlength\fR \fIlength\fR\fR
 .ad
@@ -994,7 +929,6 @@ sets the minimum length of a password.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-minclasses\fR \fInumber\fR\fR
 .ad
@@ -1006,7 +940,6 @@ values are:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
@@ -1017,7 +950,6 @@ only letters (himom)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
@@ -1028,7 +960,6 @@ both letters and numbers (hi2mom)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
@@ -1039,7 +970,6 @@ letters, numbers, and punctuation (hi2mom!)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-history\fR \fInumber\fR\fR
 .ad
@@ -1050,7 +980,6 @@ sets the number of past keys kept for a principal.
 
 .sp
 .ne 2
-.mk
 .na
 \fBErrors:\fR
 .ad
@@ -1065,7 +994,6 @@ sets the number of past keys kept for a principal.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelete_policy\fR \fB[-force]\fR \fIpolicy\fR\fR
 .ad
@@ -1077,7 +1005,6 @@ by any principals. Requires the \fBdelete\fR privilege. Aliased by
 \fBdelpol\fR.
 .sp
 .ne 2
-.mk
 .na
 \fBExample:\fR
 .ad
@@ -1086,8 +1013,8 @@ by any principals. Requires the \fBdelete\fR privilege. Aliased by
 .sp
 .in +2
 .nf
-kadmin: \fBdel_policy guests\fR 
-Are you sure you want to delete the 
+kadmin: \fBdel_policy guests\fR
+Are you sure you want to delete the
 policy "guests"? (yes/no): \fByes\fR
 Policy "guests" deleted.
 kadmin:
@@ -1099,7 +1026,6 @@ kadmin:
 
 .sp
 .ne 2
-.mk
 .na
 \fBErrors:\fR
 .ad
@@ -1116,7 +1042,6 @@ kadmin:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fBmodify_policy\fR \fB[\fIoptions\fR]\fR \fB\fIpolicy\fR\fR\fR
 .ad
@@ -1126,7 +1051,6 @@ Modifies the named policy. Options are as above for \fBadd_policy\fR. Requires
 the \fBmodify\fR privilege. Aliased by \fBmodpol\fR.
 .sp
 .ne 2
-.mk
 .na
 \fBErrors:\fR
 .ad
@@ -1141,7 +1065,6 @@ the \fBmodify\fR privilege. Aliased by \fBmodpol\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBget_policy\fR [\fB-terse\fR] \fIpolicy\fR\fR
 .ad
@@ -1152,7 +1075,6 @@ With the \fB-terse\fR flag, outputs the fields as quoted strings separated by
 tabs. Aliased by \fBgetpol\fR.
 .sp
 .ne 2
-.mk
 .na
 \fBExamples:\fR
 .ad
@@ -1180,7 +1102,6 @@ kadmin:
 
 .sp
 .ne 2
-.mk
 .na
 \fBErrors:\fR
 .ad
@@ -1195,7 +1116,6 @@ kadmin:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist_policies\fR [\fIexpression\fR]\fR
 .ad
@@ -1208,7 +1128,6 @@ existing policy names are printed. Requires the \fBlist\fR privilege. Aliased
 by \fBlistpols\fR, \fBget_policies\fR, and \fBgetpols\fR.
 .sp
 .ne 2
-.mk
 .na
 \fBExamples:\fR
 .ad
@@ -1231,7 +1150,6 @@ test-pol test-pol-nopw kadmin:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBktadd\fR [\fB-k\fR \fIkeytab\fR] [\fB-q\fR] [\fB-e\fR
 \fB\fIenctype\fR:salt\fR]\fR
@@ -1267,7 +1185,6 @@ Also, note that if you use \fB-glob\fR to create a keytab, you need to remove
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprinc-exp\fR\fR
 .ad
@@ -1277,7 +1194,6 @@ Also, note that if you use \fB-glob\fR to create a keytab, you need to remove
 command.
 .sp
 .ne 2
-.mk
 .na
 \fBExample:\fR
 .ad
@@ -1301,7 +1217,6 @@ kadmin:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBktremove\fR [\fB-k\fR \fIkeytab\fR] [\fB-q\fR] \fIprincipal\fR
 [\fIkvno\fR | \fBall\fR | \fBold\fR]\fR
@@ -1319,7 +1234,6 @@ argument is not specified, the default keytab file,
 status information is displayed. Aliased by \fBktrem\fR.
 .sp
 .ne 2
-.mk
 .na
 \fBExample:\fR
 .ad
@@ -1330,7 +1244,7 @@ status information is displayed. Aliased by \fBktrem\fR.
 .nf
 kadmin: \fBktremove -k /tmp/new-keytab nfs/chicago\fR
 Entry for principal nfs/chicago with kvno 2
-removed from keytab 
+removed from keytab
 WRFILE:/tmp/new-keytab.
 kadmin:
 .fi
@@ -1343,7 +1257,6 @@ kadmin:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBquit\fR\fR
 .ad
@@ -1361,7 +1274,6 @@ time durations or absolute times. The \fBkadmin\fR option variables
 whereas \fIexpdate\fR and \fIpwexpdate\fR are absolute times.
 .sp
 .ne 2
-.mk
 .na
 \fBExamples:\fR
 .ad
@@ -1396,98 +1308,91 @@ time and date format examples are based on the date and time of July 2, 1999,
 
 .sp
 .TS
-tab() box;
-lw(2.75i) lw(2.75i) 
-lw(2.75i) lw(2.75i) 
-.
-\fBTime Format\fR\fBExamples\fR
-\fIhh\fR[:\fImm\fR][:\fIss\fR][am/pm/a.m./p.m.]1p.m., 1:35, 1:35:30pm
+box;
+l l
+l l .
+\fBTime Format\fR	\fBExamples\fR
+\fIhh\fR[:\fImm\fR][:\fIss\fR][am/pm/a.m./p.m.]	1p.m., 1:35, 1:35:30pm
 .TE
 
 .sp
 
 .sp
 .TS
-tab();
-lw(2.75i) lw(2.75i) 
-lw(2.75i) lw(2.75i) 
-.
-\fBVariable\fR\fBDescription\fR
-\fIhh\fRT{
+l l
+l l .
+\fBVariable\fR	\fBDescription\fR
+\fIhh\fR	T{
 hour (12-hour clock, leading zero permitted but not required)
 T}
-\fImm\fRminutes
-\fIss\fRseconds
+\fImm\fR	minutes
+\fIss\fR	seconds
 .TE
 
 .sp
 
 .sp
 .TS
-tab() box;
-lw(2.75i) lw(2.75i) 
-lw(2.75i) lw(2.75i) 
-.
-\fBDate Format\fR\fBExamples\fR
-\fImm\fR/\fBdd\fR[/\fIyy\fR]07/02, 07/02/99
-\fIyyyy\fR-\fImm\fR-\fBdd\fR1999-07-02
-\fBdd\fR-\fImonth\fR-\fIyyyy\fR02-July-1999
-\fImonth\fR [,\fIyyyy\fR]Jul 02, July 02,1999
-\fBdd\fR \fImonth\fR[ \fIyyyy\fR]02 JULY, 02 july 1999
+box;
+l l
+l l .
+\fBDate Format\fR	\fBExamples\fR
+\fImm\fR/\fBdd\fR[/\fIyy\fR]	07/02, 07/02/99
+\fIyyyy\fR-\fImm\fR-\fBdd\fR	1999-07-02
+\fBdd\fR-\fImonth\fR-\fIyyyy\fR	02-July-1999
+\fImonth\fR [,\fIyyyy\fR]	Jul 02, July 02,1999
+\fBdd\fR \fImonth\fR[ \fIyyyy\fR]	02 JULY, 02 july 1999
 .TE
 
 .sp
 
 .sp
 .TS
-tab();
-lw(2.75i) lw(2.75i) 
-lw(2.75i) lw(2.75i) 
-.
-\fBVariable Description\fR
-\fBdd\fRday
-\fImm\fRmonth
-\fIyy\fRT{
+l l
+l l .
+\fBVariable Description\fR	
+\fBdd\fR	day
+\fImm\fR	month
+\fIyy\fR	T{
 year within century (00-38 is 2000 to 2038; 70-99 is 1970 to 1999)
 T}
-\fIyyyy\fRyear including century
-\fImonth\fRlocale's full or abbreviated month name
+\fIyyyy\fR	year including century
+\fImonth\fR	locale's full or abbreviated month name
 .TE
 
 .sp
 
 .sp
 .TS
-tab() box;
-lw(2.75i) lw(2.75i) 
-lw(2.75i) lw(2.75i) 
-.
-\fBTime Units\fR\fBExamples\fR
-[+|- \fI#\fR] year"-2 year"
-[+|- \fI#\fR] month"2 months"
-[+|- \fI#\fR] fortnight
-[+|- \fI#\fR] week
-[+|- \fI#\fR] day
-[+|- \fI#\fR] hour
-[+|- \fI#\fR] minute
-[+|- \fI#\fR] min
-[+|- \fI#\fR] second
-[+|- \fI#\fR] sec
-tomorrow
-yesterday
-today 
-now 
-this"this year"
-last"last saturday"
-next"next month"
-sunday
-monday
-tuesday
-wednesday
-thursday
-friday
-saturday
-never
+box;
+l l
+l l .
+\fBTime Units\fR	\fBExamples\fR
+[+|- \fI#\fR] year	"-2 year"
+[+|- \fI#\fR] month	"2 months"
+[+|- \fI#\fR] fortnight	
+[+|- \fI#\fR] week	
+[+|- \fI#\fR] day	
+[+|- \fI#\fR] hour	
+[+|- \fI#\fR] minute	
+[+|- \fI#\fR] min	
+[+|- \fI#\fR] second	
+[+|- \fI#\fR] sec	
+tomorrow	
+yesterday	
+today 	
+now 	
+this	"this year"
+last	"last saturday"
+next	"next month"
+sunday	
+monday	
+tuesday	
+wednesday	
+thursday	
+friday	
+saturday	
+never	
 .TE
 
 .sp
@@ -1503,7 +1408,6 @@ See \fBenviron\fR(5) for descriptions of the following environment variables
 that affect the execution of \fBkadmin\fR:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPAGER\fR\fR
 .ad
@@ -1516,7 +1420,6 @@ specify options. The default is \fBmore\fR(1).
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/principal\fR\fR
 .ad
@@ -1527,7 +1430,6 @@ Kerberos principal database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/principal.ulog\fR\fR
 .ad
@@ -1538,7 +1440,6 @@ The update log file for incremental propagation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/principal.kadm5\fR\fR
 .ad
@@ -1549,7 +1450,6 @@ Kerberos administrative database. Contains policy information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/principal.kadm5.lock\fR\fR
 .ad
@@ -1562,7 +1462,6 @@ this file does \fInot\fR exist).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/kadm5.dict\fR\fR
 .ad
@@ -1573,7 +1472,6 @@ Dictionary of strings explicitly disallowed as passwords.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/kadm5.acl\fR\fR
 .ad
@@ -1584,7 +1482,6 @@ List of principals and their \fBkadmin\fR administrative privileges.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/kadm5.keytab\fR\fR
 .ad
@@ -1602,13 +1499,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/kadmind.1m b/usr/src/man/man1m/kadmind.1m
index b7fb869ff8..f28c27a930 100644
--- a/usr/src/man/man1m/kadmind.1m
+++ b/usr/src/man/man1m/kadmind.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH kadmind 1M "29 Feb 2008" "SunOS 5.11" "System Administration Commands"
+.TH KADMIND 1M "Feb 29, 2008"
 .SH NAME
 kadmind \- Kerberos administration daemon
 .SH SYNOPSIS
@@ -30,7 +30,6 @@ automatically when the \fBKDC\fR is rebooted.
 work:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/kdc.conf\fR\fR
 .ad
@@ -48,7 +47,6 @@ which are mandatory and some of which are optional. In particular,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/kadm5.keytab\fR\fR
 .ad
@@ -65,7 +63,6 @@ keytab is determined by the \fBadmin_keytab\fR relation in the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/kadm5.acl\fR\fR
 .ad
@@ -102,7 +99,6 @@ policy updates incrementally instead of receiving full dumps of the database.
 These settings can be changed in the \fBkdc.conf\fR(4) file:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsunw_dbprop_enable = [true | false]\fR\fR
 .ad
@@ -113,7 +109,6 @@ Enable or disable incremental database propagation. Default is \fBfalse\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsunw_dbprop_master_ulogsize = N\fR\fR
 .ad
@@ -160,7 +155,6 @@ k5migrate        account required        pam_unix_account.so.1
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -173,7 +167,6 @@ default behavior, which is to allow the daemon to put itself in the background.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
@@ -188,7 +181,6 @@ explicitly place the daemon in the background.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIport-number\fR\fR
 .ad
@@ -201,7 +193,6 @@ The default is controlled by the \fBkadmind_port\fR relation in the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrealm\fR\fR
 .ad
@@ -215,7 +206,6 @@ which the appropriate principals are in its \fBkeytab\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fIdb_args\fR\fR
 .ad
@@ -225,7 +215,6 @@ Pass database-specific arguments to \fBkadmind\fR. Supported arguments are for
 LDAP and the \fBBerkeley-db2\fR plug-in. These arguments are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbinddn\fR=\fIbinddn\fR\fR
 .ad
@@ -237,7 +226,6 @@ LDAP simple bind DN for authorization on the directory server. Overrides the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbindpwd\fR=\fIbindpwd\fR\fR
 .ad
@@ -248,7 +236,6 @@ Bind password.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdbname\fR=\fIname\fR\fR
 .ad
@@ -259,7 +246,6 @@ For the \fBBerkeley-db2\fR plug-in, specifies a name for the Kerberos database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnconns\fR=\fInum\fR\fR
 .ad
@@ -270,7 +256,6 @@ Maximum number of server connections.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBport\fR=\fInum\fR\fR
 .ad
@@ -284,7 +269,6 @@ Directory server connection port.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/principal\fR\fR
 .ad
@@ -295,7 +279,6 @@ Kerberos principal database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/principal.ulog\fR\fR
 .ad
@@ -306,7 +289,6 @@ The update log file for incremental propagation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/principal.kadm5\fR\fR
 .ad
@@ -317,7 +299,6 @@ Kerberos administrative database containing policy information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/principal.kadm5.lock\fR\fR
 .ad
@@ -330,7 +311,6 @@ not exist).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/kadm5.dict\fR\fR
 .ad
@@ -341,7 +321,6 @@ Dictionary of strings explicitly disallowed as passwords.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/kadm5.acl\fR\fR
 .ad
@@ -352,7 +331,6 @@ List of principals and their \fBkadmin\fR administrative privileges.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/kadm5.keytab\fR\fR
 .ad
@@ -364,7 +342,6 @@ Keytab for \fBkadmin\fR principals: \fBkadmin\fR/\fIfqdn\fR,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/kdc.conf\fR\fR
 .ad
@@ -381,13 +358,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/kclient.1m b/usr/src/man/man1m/kclient.1m
index f191ec17d7..276c0055cf 100644
--- a/usr/src/man/man1m/kclient.1m
+++ b/usr/src/man/man1m/kclient.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH kclient 1M "27 May 2009" "SunOS 5.11" "System Administration Commands"
+.TH KCLIENT 1M "May 27, 2009"
 .SH NAME
 kclient \- set up a machine as a Kerberos client
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/kclient\fR [\fB-n\fR] [\fB-R\fR \fIrealm\fR] [\fB-k\fR \fIkdc\fR] [\fB-a\fR \fIadminuser\fR] 
+\fB/usr/sbin/kclient\fR [\fB-n\fR] [\fB-R\fR \fIrealm\fR] [\fB-k\fR \fIkdc\fR] [\fB-a\fR \fIadminuser\fR]
      [\fB-c\fR \fIfilepath\fR] [\fB-d\fR \fIdnsarg\fR] [\fB-f\fR \fIfqdn_list\fR] [\fB-h\fR \fIlogical_host_name\fR]
      [\fB-k\fR \fIkdc_list\fR] [\fB-m\fR \fImaster_kdc\fR] [\fB-p\fR \fIprofile\fR] [\fB-s\fR \fIpam_service\fR]
      [\fB-T\fR \fIkdc_vendor\fR]
@@ -142,7 +142,6 @@ delivered  in  the  \fBSUNWntpu\fR package (not a SunOS man page).
 The non-interactive mode supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -156,7 +155,6 @@ file if the \fB-K\fR option has not been specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR [ \fIrealm\fR ]\fR
 .ad
@@ -167,7 +165,6 @@ Specifies the Kerberos realm.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR \fIkdc_list\fR\fR
 .ad
@@ -183,7 +180,6 @@ canonicalized by DNS.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR [ \fIadminuser\fR ]\fR
 .ad
@@ -194,7 +190,6 @@ Specifies the Kerberos administrative user.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fIkdc_vendor\fR\fR
 .ad
@@ -204,7 +199,6 @@ Configure the Kerberos client to associate with a third party server. Valid
 \fIkdc_vendor\fR currently supported are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBms_ad\fR\fR
 .ad
@@ -215,7 +209,6 @@ Microsoft Active Directory
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmit\fR\fR
 .ad
@@ -226,7 +219,6 @@ MIT KDC server
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBheimdal\fR\fR
 .ad
@@ -237,7 +229,6 @@ Heimdal KDC server
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshishi\fR\fR
 .ad
@@ -252,7 +243,6 @@ with the server if the \fBms_ad\fR option is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR [ \fIfilepath\fR ]\fR
 .ad
@@ -265,7 +255,6 @@ remote host and brought over to the local host by means of NFS.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR [ \fIdnsarg\fR ]\fR
 .ad
@@ -285,7 +274,6 @@ be used for any kind of mapping lookup.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR \fIdomain_list\fR\fR
 .ad
@@ -301,7 +289,6 @@ is \fBhost1.eng.example.com\fR, then the domain that is mapped to the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-K\fR\fR
 .ad
@@ -335,7 +322,6 @@ time, these keys will be installed on the machine.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR [ \fIfqdn_list\fR ]\fR
 .ad
@@ -354,7 +340,6 @@ kerberized services, but situated in multiple different DNS domains.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIlogical_host_name\fR\fR
 .ad
@@ -368,7 +353,6 @@ be manually copied over to the other members of the cluster.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fImaster_kdc\fR\fR
 .ad
@@ -382,7 +366,6 @@ listed with the \fB-k\fR option is the master KDC.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR [ \fIprofile\fR ]\fR
 .ad
@@ -421,7 +404,6 @@ listed in the profile.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIpam_service\fR\fR
 .ad
@@ -539,7 +521,6 @@ the KDC server \fBkdc1.example.com\fR:
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/kadm5.acl\fR\fR
 .ad
@@ -550,7 +531,6 @@ Kerberos access control list (ACL) file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/krb5.conf\fR\fR
 .ad
@@ -561,7 +541,6 @@ Default location for the local host's configuration file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/krb5.keytab\fR\fR
 .ad
@@ -572,7 +551,6 @@ Default location for the local host's \fBkeytab\fR file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/nfssec.conf\fR\fR
 .ad
@@ -583,7 +561,6 @@ File listing NFS security modes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/resolv.conf\fR\fR
 .ad
@@ -600,13 +577,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/kdb5_ldap_util.1m b/usr/src/man/man1m/kdb5_ldap_util.1m
index b7afd69178..11c6a2d521 100644
--- a/usr/src/man/man1m/kdb5_ldap_util.1m
+++ b/usr/src/man/man1m/kdb5_ldap_util.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH kdb5_ldap_util 1M "28 Aug 2007" "SunOS 5.11" "System Administration Commands"
+.TH KDB5_LDAP_UTIL 1M "Aug 28, 2007"
 .SH NAME
 kdb5_ldap_util \- Kerberos configuration utility
 .SH SYNOPSIS
@@ -35,7 +35,6 @@ multiple commands and are described in their own section, below.
 The following general options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR \fIuser_dn\fR\fR
 .ad
@@ -47,7 +46,6 @@ perform the operation on the LDAP server.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-H\fR \fIldap_uri\fR\fR
 .ad
@@ -58,7 +56,6 @@ Specifies the URI of the LDAP server.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR \fIpasswd\fR\fR
 .ad
@@ -73,7 +70,6 @@ Specifies the password of \fIuser_dn\fR. This option is not recommended.
 The following options apply to a number of \fBkdb5_ldap_util\fR commands.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-subtrees\fR \fIsubtree_dn_list\fR\fR
 .ad
@@ -85,7 +81,6 @@ contains the DNs of the subtree objects separated by a colon.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-sscope\fR \fIsearch_scope\fR\fR
 .ad
@@ -97,7 +92,6 @@ values are 1 or \fBone\fR (one level), 2 or \fBsub\fR (subtrees).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-containerref\fR \fIcontainer_reference_dn\fR\fR
 .ad
@@ -110,7 +104,6 @@ principals will be created in the realm container.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-maxtktlife\fR \fImax_ticket_life\fR\fR
 .ad
@@ -121,7 +114,6 @@ Specifies maximum ticket life for principals in this realm.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-maxrenewlife\fR \fImax_renewable_ticket_life\fR\fR
 .ad
@@ -132,7 +124,6 @@ Specifies maximum renewable life of tickets for principals in this realm.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrealm\fR\fR
 .ad
@@ -157,7 +148,7 @@ following syntax:
 .nf
 create \e
 [-subtrees \fIsubtree_dn_list\fR]
-[-sscope \fIsearch_scope\fR] 
+[-sscope \fIsearch_scope\fR]
 [-containerref \fIcontainer_reference_dn\fR]
 [-k \fImkeytype\fR]
 [-m|-P \fIpassword\fR| -sf \fIstashfilename\fR]
@@ -177,7 +168,6 @@ create \e
 The \fBcreate\fR command has the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-subtree\fR \fIsubtree_dn_list\fR\fR
 .ad
@@ -188,7 +178,6 @@ See "Common Command-specific Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-sscope\fR \fIsearch_scope\fR\fR
 .ad
@@ -199,7 +188,6 @@ See "Common Command-specific Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-containerref\fR \fIcontainer_reference_dn\fR\fR
 .ad
@@ -210,7 +198,6 @@ See "Common Command-specific Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR \fImkeytype\fR\fR
 .ad
@@ -222,7 +209,6 @@ given in \fBkdc.conf\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
@@ -234,7 +220,6 @@ than fetched from a file on the disk.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIpassword\fR\fR
 .ad
@@ -245,7 +230,6 @@ Specifies the master database password. This option is not recommended.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-sf\fR \fIstashfilename\fR\fR
 .ad
@@ -256,7 +240,6 @@ Specifies the stash file of the master database password.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
@@ -267,7 +250,6 @@ Specifies that the stash file is to be created.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-maxtktlife\fR \fImax_ticket_life\fR\fR
 .ad
@@ -278,7 +260,6 @@ See "Common Command-specific Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-maxrenewlife\fR \fImax_renewable_ticket_life\fR\fR
 .ad
@@ -289,7 +270,6 @@ See "Common Command-specific Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrealm\fR\fR
 .ad
@@ -300,7 +280,6 @@ See "Common Command-specific Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIticket_flags\fR\fR
 .ad
@@ -337,7 +316,6 @@ modify \e
 The \fBmodify\fR command has the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-subtree\fR \fIsubtree_dn_list\fR\fR
 .ad
@@ -348,7 +326,6 @@ See "Common Command-specific Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-sscope\fR \fIsearch_scope\fR\fR
 .ad
@@ -359,7 +336,6 @@ See "Common Command-specific Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-containerref\fR \fIcontainer_reference_dn\fR\fR
 .ad
@@ -370,7 +346,6 @@ See "Common Command-specific Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-maxtktlife\fR \fImax_ticket_life\fR\fR
 .ad
@@ -381,7 +356,6 @@ See "Common Command-specific Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-maxrenewlife\fR \fImax_renewable_ticket_life\fR\fR
 .ad
@@ -392,7 +366,6 @@ See "Common Command-specific Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrealm\fR\fR
 .ad
@@ -403,7 +376,6 @@ See "Common Command-specific Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIticket_flags\fR\fR
 .ad
@@ -433,7 +405,6 @@ view [-r \fIrealm\fR]
 The \fBview\fR command has the following option:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrealm\fR\fR
 .ad
@@ -460,7 +431,6 @@ destroy [-f] [-r \fIrealm\fR]
 The \fBdestroy\fR command has the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -471,7 +441,6 @@ If specified, \fBdestroy\fR does not prompt you for confirmation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrealm\fR\fR
 .ad
@@ -515,7 +484,6 @@ stashsrvpw [-f \fIfilename\fR] \fIservicedn\fR
 The \fBstashsrvpw\fR command has the following option and argument:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfilename\fR\fR
 .ad
@@ -534,7 +502,6 @@ Specifies the complete path of the service password file. The default is:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIservicedn\fR\fR
 .ad
@@ -567,7 +534,6 @@ create_policy \e
 The \fBcreate_policy\fR command has the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrealm\fR\fR
 .ad
@@ -578,7 +544,6 @@ See "Common Command-specific Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-maxtktlife\fR \fImax_ticket_life\fR\fR
 .ad
@@ -589,7 +554,6 @@ See "Common Command-specific Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-maxrenewlife\fR \fImax_renewable_ticket_life\fR\fR
 .ad
@@ -600,7 +564,6 @@ See "Common Command-specific Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIticket_flags\fR\fR
 .ad
@@ -614,7 +577,6 @@ these flags.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpolicy_name\fR\fR
 .ad
@@ -663,7 +625,6 @@ view_policy [-r \fIrealm\fR] \fIpolicy_name\fR
 The \fBview_policy\fR command has the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrealm\fR\fR
 .ad
@@ -674,7 +635,6 @@ See "Common Command-specific Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpolicy_name\fR\fR
 .ad
@@ -701,7 +661,6 @@ destroy_policy [-r \fIrealm\fR] [-force] \fIpolicy_name\fR
 The \fBdestroy_policy\fR command has the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrealm\fR\fR
 .ad
@@ -712,7 +671,6 @@ See "Common Command-specific Options," above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-force\fR\fR
 .ad
@@ -725,7 +683,6 @@ confirm the deletion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpolicy_name\fR\fR
 .ad
@@ -752,7 +709,6 @@ list_policy [-r \fIrealm\fR]
 The \fBlist_policy\fR command has the following option:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrealm\fR\fR
 .ad
@@ -768,7 +724,6 @@ A number of \fBkdb5_ldap_util\fR commands have \fBticket_flag\fR options. These
 flags are described as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB{-|+}allow_dup_skey\fR\fR
 .ad
@@ -782,7 +737,6 @@ clears this flag.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB{-|+}allow_forwardable\fR\fR
 .ad
@@ -795,7 +749,6 @@ tickets. This setting sets the \fBKRB5_KDB_DISALLOW_FORWARDABLE\fR flag.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB{-|+}allow_postdated\fR\fR
 .ad
@@ -808,7 +761,6 @@ This setting sets the \fBKRB5_KDB_DISALLOW_POSTDATED\fR flag.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB{-|+}allow_proxiable\fR\fR
 .ad
@@ -821,7 +773,6 @@ This setting sets the \fBKRB5_KDB_DISALLOW_PROXIABLE\fR flag.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB{-|+}allow_renewable\fR\fR
 .ad
@@ -834,7 +785,6 @@ This setting sets the \fBKRB5_KDB_DISALLOW_RENEWABLE\fR flag.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB{-|+}allow_svr\fR\fR
 .ad
@@ -847,7 +797,6 @@ this flag.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB{-|+}allow_tgs_req\fR\fR
 .ad
@@ -862,7 +811,6 @@ most purposes.  \fB+allow_tgs_req\fR clears this flag. The default is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB{-|+}allow_tix\fR\fR
 .ad
@@ -876,7 +824,6 @@ the database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB{-|+}needchange\fR\fR
 .ad
@@ -890,7 +837,6 @@ principals in the database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB{-|+}password_changing_service\fR\fR
 .ad
@@ -906,7 +852,6 @@ sets the \fBKRB5_KDB_PWCHANGE_SERVICE\fR flag on principals in the database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB{-|+}requires_hwauth\fR\fR
 .ad
@@ -919,7 +864,6 @@ device before being allowed to \fBkinit\fR(1).  This setting sets the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB{-|+}requires_preauth\fR\fR
 .ad
@@ -1259,13 +1203,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityVolatile
+Interface Stability	Volatile
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/kdb5_util.1m b/usr/src/man/man1m/kdb5_util.1m
index 8161d0543b..27e6fa0fdd 100644
--- a/usr/src/man/man1m/kdb5_util.1m
+++ b/usr/src/man/man1m/kdb5_util.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH kdb5_util 1M "29 Feb 2008" "SunOS 5.11" "System Administration Commands"
+.TH KDB5_UTIL 1M "Feb 29, 2008"
 .SH NAME
 kdb5_util \- Kerberos Database maintenance utility
 .SH SYNOPSIS
@@ -26,7 +26,6 @@ containing the Kerberos database master key.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdbname\fR\fR
 .ad
@@ -39,7 +38,6 @@ option, the default database name is \fB/var/krb5/principal\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIstashfile_name\fR\fR
 .ad
@@ -50,7 +48,6 @@ Specify the stash file name. You can specify an absolute path.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR \fImkeytype\fR\fR
 .ad
@@ -64,7 +61,6 @@ Specify the master key type. Valid values are \fBdes3-cbc-sha1\fR,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
@@ -75,7 +71,6 @@ Enter the master key manually.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR \fImkeyname\fR\fR
 .ad
@@ -86,7 +81,6 @@ Specify the master key name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIpassword\fR\fR
 .ad
@@ -97,7 +91,6 @@ Use the specified \fIpassword\fR instead of the stash file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrealm\fR\fR
 .ad
@@ -108,7 +101,6 @@ Use \fIrealm\fR as the default database realm.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fIdb_args\fR\fR
 .ad
@@ -118,7 +110,6 @@ Pass database-specific arguments to \fBkadmin\fR. Supported arguments are for
 LDAP and the \fBBerkeley-db2\fR plug-in. These arguments are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbinddn\fR=\fIbinddn\fR\fR
 .ad
@@ -130,7 +121,6 @@ LDAP simple bind DN for authorization on the directory server. Overrides the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbindpwd\fR=\fIbindpwd\fR\fR
 .ad
@@ -141,7 +131,6 @@ Bind password.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdbname\fR=\fIname\fR\fR
 .ad
@@ -152,7 +141,6 @@ For the \fBBerkeley-db2\fR plug-in, specifies a name for the Kerberos database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnconns\fR=\fInum\fR\fR
 .ad
@@ -163,7 +151,6 @@ Maximum number of server connections.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBport\fR=\fInum\fR\fR
 .ad
@@ -180,7 +167,6 @@ Directory server connection port.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcmd\fR\fR
 .ad
@@ -192,7 +178,6 @@ a stash file.
 You can specify the following commands:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcreate\fR \fB-s\fR\fR
 .ad
@@ -208,7 +193,6 @@ same options when modifying or destroying the database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdestroy\fR\fR
 .ad
@@ -219,7 +203,6 @@ Destroys the database specified by the \fB-d\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstash\fR\fR
 .ad
@@ -233,7 +216,6 @@ the password.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdump\fR [\fB-old\fR] [\fB-b6\fR] [\fB-b7\fR] [\fB-ov\fR] [\fB-verbose\fR]
 [\fB-mkey_convert\fR] [\fB-new_mkey_file\fR \fImkey_file\fR] [\fB-rev\fR]
@@ -247,7 +229,6 @@ If \fIfilename\fR is not specified or is the string "-", the dump is sent to
 standard output. Options are as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-old\fR\fR
 .ad
@@ -259,7 +240,6 @@ Causes the dump to be in the Kerberos 5 Beta 5 and earlier dump format
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b6\fR\fR
 .ad
@@ -271,7 +251,6 @@ version 3.0\fR").
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b7\fR\fR
 .ad
@@ -283,7 +262,6 @@ version 4\fR"). This was the dump format produced on releases prior to 1.2.2.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-ov\fR\fR
 .ad
@@ -294,7 +272,6 @@ Causes the dump to be in \fBovsec_adm_export\fR format.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-verbose\fR\fR
 .ad
@@ -305,7 +282,6 @@ Causes the name of each principal and policy to be displayed as it is dumped.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-mkey_convert\fR\fR
 .ad
@@ -317,7 +293,6 @@ the key data in the dumpfile. The key data in the database will not be changed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-new_mkey_file\fR \fImkey_file\fR\fR
 .ad
@@ -330,7 +305,6 @@ be changed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-rev\fR\fR
 .ad
@@ -342,7 +316,6 @@ normally, in cases where database corruption has occured.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-recurse\fR\fR
 .ad
@@ -358,7 +331,6 @@ retrieve more principals than will the \fB-rev\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBload\fR [\fB-old\fR] [\fB-b6\fR] [\fB-b7\fR] [\fB-ov\fR] [\fB-hash\fR]
 [\fB-verbose\fR] [\fB-update\fR] \fIfilename\fR \fIdbname\fR
@@ -375,7 +347,6 @@ The \fB-old\fR option requires the database to be in the Kerberos 5 Beta 5 or
 earlier format ("\fBkdb5_edit load_dump version 2.0\fR").
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b6\fR\fR
 .ad
@@ -387,7 +358,6 @@ load_dump version 3.0\fR").
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b7\fR\fR
 .ad
@@ -399,7 +369,6 @@ load_dump version 4\fR").
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-ov\fR\fR
 .ad
@@ -411,7 +380,6 @@ the \fB-update\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-hash\fR\fR
 .ad
@@ -425,7 +393,6 @@ principals.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-verbose\fR\fR
 .ad
@@ -436,7 +403,6 @@ Causes the name of each principal and policy to be displayed as it is dumped.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-update\fR\fR
 .ad
@@ -449,7 +415,6 @@ and the old one is destroyed upon successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfilename\fR\fR
 .ad
@@ -460,7 +425,6 @@ Required argument that specifies a path to a file containing database dump.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdbname\fR\fR
 .ad
@@ -472,7 +436,6 @@ overrides the default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIadmin_dbname\fR\fR
 .ad
@@ -505,7 +468,6 @@ jdb@ACME.COM pak@ACME.COM
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/principal\fR\fR
 .ad
@@ -516,7 +478,6 @@ Kerberos principal database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/principal.kadm5\fR\fR
 .ad
@@ -527,7 +488,6 @@ Kerberos administrative database. Contains policy information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/principal.kadm5.lock\fR\fR
 .ad
@@ -540,7 +500,6 @@ file does not exist).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/principal.ulog\fR\fR
 .ad
@@ -557,13 +516,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/kdcmgr.1m b/usr/src/man/man1m/kdcmgr.1m
index 72a277a4ef..a724972cfa 100644
--- a/usr/src/man/man1m/kdcmgr.1m
+++ b/usr/src/man/man1m/kdcmgr.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH kdcmgr 1M "19 Sep 2007" "SunOS 5.11" "System Administration Commands"
+.TH KDCMGR 1M "Sep 19, 2007"
 .SH NAME
 kdcmgr \- set up a Kerberos Key Distribution Center (KDC)
 .SH SYNOPSIS
@@ -92,7 +92,6 @@ lowercase letters
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIadmprincipal\fR\fR
 .ad
@@ -110,7 +109,6 @@ the output of \fBlogname\fR(1) appended by \fB/admin\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIenctype\fR\fR
 .ad
@@ -132,7 +130,6 @@ The default encryption type is \fBaes128-cts-hmac-sha1-96\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -143,7 +140,6 @@ Displays usage information for \fBkdcmgr\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIpwfile\fR\fR
 .ad
@@ -159,7 +155,6 @@ system. Once the KDC has been configured, you should remove \fIpwfile\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrealm\fR\fR
 .ad
@@ -180,7 +175,6 @@ default realm name.
 The following subcommands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcreate\fR [ \fImaster\fR ]\fR
 .ad
@@ -194,7 +188,6 @@ Creates a KDC. If no option is specified, an attempt to create a master KDC is
 made.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcreate\fR [ \fImaster\fR ]\fR
 .ad
@@ -206,7 +199,6 @@ Create a master KDC. Upon successful configuration the \fBkrb5kdc\fR(1M) and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcreate\fR [ \fB-m\fR \fImasterkdc\fR ] slave\fR
 .ad
@@ -224,7 +216,6 @@ prompted for a master KDC host name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdestroy\fR\fR
 .ad
@@ -236,7 +227,6 @@ server. A confirmation is required before these files are deleted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstatus\fR\fR
 .ad
@@ -314,7 +304,6 @@ correct password for the master key is also required.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/krb5.conf\fR\fR
 .ad
@@ -325,7 +314,6 @@ Main Kerberos configuration file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/kdc.conf\fR\fR
 .ad
@@ -336,7 +324,6 @@ KDC configuration, used by both master and slave servers.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/krb5.keytab\fR\fR
 .ad
@@ -347,7 +334,6 @@ Default location of the local host's service keys.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/kadm5.acl\fR\fR
 .ad
@@ -358,7 +344,6 @@ Kerberos administrative access control list (ACL).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/kadm5.keytab\fR\fR
 .ad
@@ -369,7 +354,6 @@ Service keys specific to \fBkadmind\fR(1M).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/principal\fR\fR
 .ad
@@ -380,7 +364,6 @@ Kerberos principal database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/principal.kadm5\fR\fR
 .ad
@@ -391,7 +374,6 @@ Kerberos policy database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/kpropd.acl\fR\fR
 .ad
@@ -408,13 +390,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below
+Interface Stability	See below
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/kernel.1m b/usr/src/man/man1m/kernel.1m
index f924b92809..f67bb37af9 100644
--- a/usr/src/man/man1m/kernel.1m
+++ b/usr/src/man/man1m/kernel.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH kernel 1M "27 Nov 2007" "SunOS 5.11" "System Administration Commands"
+.TH KERNEL 1M "Nov 27, 2007"
 .SH NAME
 kernel \- UNIX system executable file containing basic operating system
 services
@@ -73,7 +73,6 @@ The kernel configuration can be controlled using the \fB/etc/system\fR file
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -90,7 +89,6 @@ system configuration file. See \fBsystem\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIaltinit\fR\fR
 .ad
@@ -103,7 +101,6 @@ must be a valid path to an executable. The default primordial process is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fIsmf_options\fR\fR
 .ad
@@ -120,7 +117,6 @@ boot the system.
 Recovery options
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdebug\fR\fR
 .ad
@@ -131,7 +127,6 @@ Prints standard per-service output and all \fBsvc.startd\fR messages to log.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fImilestone=[milestone]\fR\fR
 .ad
@@ -146,7 +141,6 @@ Boot with some SMF services temporarily disabled, as indicated by
 Messages options
 .sp
 .ne 2
-.mk
 .na
 \fB\fIquiet\fR\fR
 .ad
@@ -158,7 +152,6 @@ intervention.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIverbose\fR\fR
 .ad
@@ -171,7 +164,6 @@ Prints standard per-service output with more informational messages.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -184,7 +176,6 @@ configure the logical namespace in \fB/dev\fR. See \fBadd_drv\fR(1M) and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
@@ -195,7 +186,6 @@ Boots only to init level 's'. See \fBinit\fR(1M).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -208,7 +198,6 @@ are still printed, but the output is directed to the system logfile. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
@@ -225,7 +214,6 @@ See \fBboot\fR(1M) for examples and instructions on how to boot.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/kernel\fR\fR
 .ad
@@ -237,7 +225,6 @@ instruction set that are needed for booting the system. of the core image file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/platform/\fIplatform-name\fR/kernel\fR\fR
 .ad
@@ -248,7 +235,6 @@ The platform-specific kernel components.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/platform/\fIhardware-class-name\fR\fR\fB/kernel\fR\fR
 .ad
@@ -259,7 +245,6 @@ The kernel components specific to this hardware class.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/kernel\fR\fR
 .ad
@@ -275,7 +260,6 @@ The directories in this section can potentially contain the following
 subdirectories:
 .sp
 .ne 2
-.mk
 .na
 \fBdrv\fR
 .ad
@@ -286,7 +270,6 @@ Loadable device drivers
 
 .sp
 .ne 2
-.mk
 .na
 \fBexec\fR
 .ad
@@ -297,7 +280,6 @@ The modules that execute programs stored in various file formats.
 
 .sp
 .ne 2
-.mk
 .na
 \fBfs\fR
 .ad
@@ -308,7 +290,6 @@ File system modules
 
 .sp
 .ne 2
-.mk
 .na
 \fBmisc\fR
 .ad
@@ -319,7 +300,6 @@ Miscellaneous system-related modules
 
 .sp
 .ne 2
-.mk
 .na
 \fBsched\fR
 .ad
@@ -330,7 +310,6 @@ Operating system schedulers
 
 .sp
 .ne 2
-.mk
 .na
 \fBstrmod\fR
 .ad
@@ -341,7 +320,6 @@ System V STREAMS loadable modules
 
 .sp
 .ne 2
-.mk
 .na
 \fBsys\fR
 .ad
@@ -353,7 +331,6 @@ Loadable system calls
 .SS "SPARC"
 .sp
 .ne 2
-.mk
 .na
 \fBcpu\fR
 .ad
@@ -364,7 +341,6 @@ Processor specific modules
 
 .sp
 .ne 2
-.mk
 .na
 \fBtod\fR
 .ad
@@ -380,7 +356,6 @@ contained within \fBsparcv9\fR directories in the directories listed above.
 .SS "x86"
 .sp
 .ne 2
-.mk
 .na
 \fBmach\fR
 .ad
diff --git a/usr/src/man/man1m/keyserv.1m b/usr/src/man/man1m/keyserv.1m
index 4f39fc027a..2b1577b009 100644
--- a/usr/src/man/man1m/keyserv.1m
+++ b/usr/src/man/man1m/keyserv.1m
@@ -1,10 +1,10 @@
 '\" te
-.\" Copyright 1989 AT&T 
+.\" Copyright 1989 AT&T
 .\" Copyright (C) 2005, Sun Microsystems, Inc. All Rights Reserved
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH keyserv 1M "4 Jan 2002" "SunOS 5.11" "System Administration Commands"
+.TH KEYSERV 1M "Jan 4, 2002"
 .SH NAME
 keyserv \- server for storing private encryption keys
 .SH SYNOPSIS
@@ -38,12 +38,10 @@ The \fB/etc/default/keyserv\fR file contains the following default parameter
 settings. See .
 .sp
 .ne 2
-.mk
 .na
 \fB\fBENABLE_NOBODY_KEYS\fR\fR
 .ad
 .RS 22n
-.rt  
 Specifies whether default keys for \fBnobody\fR are used.
 \fBENABLE_NOBODY_KEYS=NO\fR is equivalent to the \fB-d\fR command-line option.
 The default value for \fBENABLE_NOBODY_KEYS\fR is \fBYES\fR.
@@ -55,57 +53,47 @@ The default value for \fBENABLE_NOBODY_KEYS\fR is \fBYES\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 15n
-.rt  
 Do not use disk caches. This option overrides any \fB-s\fR option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
 .RS 15n
-.rt  
 Run in debugging mode and log all requests to \fBkeyserv\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 15n
-.rt  
 Disable the use of default keys for \fBnobody\fR. See .
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
 .RS 15n
-.rt  
 Enable the use of default keys for \fBnobody\fR. This is the default behavior.
 See .
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 15n
-.rt  
 Root's secret key is not read from \fB/etc/.rootkey\fR. Instead, \fBkeyserv\fR
 prompts the user for the password to decrypt root's key stored in the
 \fBpublickey\fR database and then stores the decrypted key in
@@ -115,22 +103,18 @@ prompts the user for the password to decrypt root's key stored in the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsizespec\fR\fR
 .ad
 .RS 15n
-.rt  
 Specify the size of the extended Diffie-Hellman common key disk caches. The
 \fIsizespec\fR can be one of the following forms:
 .sp
 .ne 2
-.mk
 .na
 \fB\fImechtype\fR=\fBsize\fR\fR
 .ad
 .RS 17n
-.rt  
 \fBsize\fR is an integer specifying the maximum number of entries in the cache,
 or an integer immediately followed by the letter \fIM\fR, denoting the maximum
 size in MB.
@@ -138,12 +122,10 @@ size in MB.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsize\fR\fR
 .ad
 .RS 17n
-.rt  
 This form of \fIsizespec\fR applies to all caches.
 .RE
 
@@ -154,23 +136,19 @@ mechanism, \fBAUTH_DES\fR, does not use a disk cache.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/.rootkey\fR\fR
 .ad
 .RS 24n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/keyserv\fR\fR
 .ad
 .RS 24n
-.rt  
 Contains default settings. You can use command-line options to override these
 settings.
 .RE
diff --git a/usr/src/man/man1m/killall.1m b/usr/src/man/man1m/killall.1m
index 20a3639b3f..2f41c9da65 100644
--- a/usr/src/man/man1m/killall.1m
+++ b/usr/src/man/man1m/killall.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH killall 1M "14 Sep 1992" "SunOS 5.11" "System Administration Commands"
+.TH KILLALL 1M "Sep 14, 1992"
 .SH NAME
 killall \- kill all active processes
 .SH SYNOPSIS
diff --git a/usr/src/man/man1m/kprop.1m b/usr/src/man/man1m/kprop.1m
index 6b9051b406..8fb5938bb0 100644
--- a/usr/src/man/man1m/kprop.1m
+++ b/usr/src/man/man1m/kprop.1m
@@ -4,13 +4,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH kprop 1M "14 Nov 2005" "SunOS 5.11" "System Administration Commands"
+.TH KPROP 1M "Nov 14, 2005"
 .SH NAME
 kprop \- Kerberos database propagation program
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/krb5/kprop\fR [\fB-d\fR] [\fB-f\fR \fIfile\fR] [\fB-p\fR \fIport-number\fR] 
+\fB/usr/lib/krb5/kprop\fR [\fB-d\fR] [\fB-f\fR \fIfile\fR] [\fB-p\fR \fIport-number\fR]
      [\fB-r\fR \fIrealm\fR] [\fB-s\fR \fIkeytab\fR] [\fIhost\fR]
 .fi
 
@@ -51,57 +51,47 @@ The database to be propagated must be dumped to a file using
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 18n
-.rt  
 Enable debug mode. Default is debug mode disabled.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfile\fR\fR
 .ad
 .RS 18n
-.rt  
 File to be sent to the slave \fBKDC\fR. Default is the
 \fB/var/krb5/slave_datatrans\fR file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIport-number\fR\fR
 .ad
 .RS 18n
-.rt  
 Propagate \fIport-number\fR. Default is port \fB754\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrealm\fR\fR
 .ad
 .RS 18n
-.rt  
 Realm where propagation will occur. Default \fIrealm\fR is the local realm.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIkeytab\fR\fR
 .ad
 .RS 18n
-.rt  
 Location of the keytab. Default location is \fB/etc/krb5/krb5.keytab\fR.
 .RE
 
@@ -111,12 +101,10 @@ Location of the keytab. Default location is \fB/etc/krb5/krb5.keytab\fR.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIhost\fR\fR
 .ad
 .RS 8n
-.rt  
 Name of the slave \fBKDC\fR.
 .RE
 
@@ -141,34 +129,28 @@ file must contain an entry for the all the \fBKDC\fRs.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/kpropd.acl\fR\fR
 .ad
 .RS 29n
-.rt  
 List of principals of all the KDCs; resides on each slave KDC.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/krb5.keytab\fR\fR
 .ad
 .RS 29n
-.rt  
 Keytab for Kerberos clients.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/slave_datatrans\fR\fR
 .ad
 .RS 29n
-.rt  
 Kerberos database propagated to the KDC slaves.
 .RE
 
diff --git a/usr/src/man/man1m/kpropd.1m b/usr/src/man/man1m/kpropd.1m
index ca7e28005a..0279b6d380 100644
--- a/usr/src/man/man1m/kpropd.1m
+++ b/usr/src/man/man1m/kpropd.1m
@@ -4,14 +4,14 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH kpropd 1M "11 Jul 2005" "SunOS 5.11" "System Administration Commands"
+.TH KPROPD 1M "Jul 11, 2005"
 .SH NAME
 kpropd \- Kerberos propagation daemon for slave KDCs
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/krb5/kpropd\fR [\fB-d\fR] [\fB-f\fR \fItemp_dbfile\fR] [\fB-F\fR \fIdbfile\fR] 
-     [\fB-p\fR \fIkdb_util\fR] [\fB-P\fR \fIport_number\fR] [\fB-r\fR \fIrealm\fR] 
+\fB/usr/lib/krb5/kpropd\fR [\fB-d\fR] [\fB-f\fR \fItemp_dbfile\fR] [\fB-F\fR \fIdbfile\fR]
+     [\fB-p\fR \fIkdb_util\fR] [\fB-P\fR \fIport_number\fR] [\fB-r\fR \fIrealm\fR]
      [\fB-s\fR \fIsrv_tabfile\fR] [\fB-S\fR] [\fB-a\fR \fIacl_file\fR]
 .fi
 
@@ -39,7 +39,6 @@ kpropd is not configured for incremental database propagation by default. These
 settings can be changed in the \fBkdc.conf\fR(4) file:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsunw_dbprop_enable = [true | false]\fR\fR
 .ad
@@ -50,7 +49,6 @@ Enables or disables incremental database propagation. Default is \fBfalse\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsunw_dbprop_slave_poll = N[s, m, h]\fR\fR
 .ad
@@ -73,107 +71,89 @@ resides.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 18n
-.rt  
 Enable debug mode. Default is debug mode disabled.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fItemp_dbfile\fR\fR
 .ad
 .RS 18n
-.rt  
 The location of the slave's temporary principal database file. Default is
 \fB/var/krb5/from_master\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fIdbfile\fR\fR
 .ad
 .RS 18n
-.rt  
 The location of the slave's principal database file. Default is
 \fB/var/krb5/principal\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIkdb_util\fR\fR
 .ad
 .RS 18n
-.rt  
 The location of the Kerberos database utility used for loading principal
 databases. Default is \fB/usr/sbin/kdb5_util\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIport_number\fR\fR
 .ad
 .RS 18n
-.rt  
 Specifies the port number on which \fBkpropd\fR will listen. Default is 754
 (service name: \fBkrb5_prop\fR).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrealm\fR\fR
 .ad
 .RS 18n
-.rt  
 Specifies from which Kerberos realm kpropd will receive information. Default is
 specified in \fB/etc/krb5/krb5.conf\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsrv_tabfile\fR\fR
 .ad
 .RS 18n
-.rt  
 The location of the service table file used to authenticate the \fBkpropd\fR
 daemon.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR\fR
 .ad
 .RS 18n
-.rt  
 Run the daemon in standalone mode, instead of having \fBinetd\fR listen for
 requests. Default is non-standalone mode.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIacl_file\fR\fR
 .ad
 .RS 18n
-.rt  
 The location of the \fBkpropd\fR's access control list to verify if this server
 can run the \fBkpropd\fR daemon. The file contains a list of principal name(s)
 that will be receiving updates. Default is \fB/etc/krb5/kpropd.acl\fR.
@@ -182,56 +162,46 @@ that will be receiving updates. Default is \fB/etc/krb5/kpropd.acl\fR.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/principal\fR\fR
 .ad
 .RS 28n
-.rt  
 Kerberos principal database.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/principal.ulog\fR\fR
 .ad
 .RS 28n
-.rt  
 The update log file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/kdc.conf\fR\fR
 .ad
 .RS 28n
-.rt  
 KDC configuration information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/kpropd.acl\fR\fR
 .ad
 .RS 28n
-.rt  
 List of principals of all the KDCs; resides on each slave KDC.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/from_master\fR\fR
 .ad
 .RS 28n
-.rt  
 Temporary file used by kpropd before loading this to the principal database.
 .RE
 
@@ -243,13 +213,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/kproplog.1m b/usr/src/man/man1m/kproplog.1m
index 35711a5caa..1a04a48dc2 100644
--- a/usr/src/man/man1m/kproplog.1m
+++ b/usr/src/man/man1m/kproplog.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH kproplog 1M "29 Mar 2004" "SunOS 5.11" "System Administration Commands"
+.TH KPROPLOG 1M "Mar 29, 2004"
 .SH NAME
 kproplog \- display the contents of the Kerberos principal update log
 .SH SYNOPSIS
@@ -42,12 +42,10 @@ time stamp of the last update.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 11n
-.rt  
 Display a summary of the update log. This information includes the database
 version number, state of the database, the number of updates in the log, the
 time stamp of the first and last update, and the version number of the first
@@ -56,24 +54,20 @@ and last update entry.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\ \fInum\fR\fR
 .ad
 .RS 11n
-.rt  
 Display the last \fInum\fR update entries in the log. This is useful when
 debugging synchronization between KDC servers.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 11n
-.rt  
 Display individual attributes per update. An example of the output generated
 for one entry:
 .sp
@@ -101,12 +95,10 @@ Update Entry
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/principal.ulog\fR\fR
 .ad
 .RS 28n
-.rt  
 The update log file for incremental propagation.
 .RE
 
@@ -118,13 +110,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/krb5kdc.1m b/usr/src/man/man1m/krb5kdc.1m
index d20045d36c..3347c5ccbe 100644
--- a/usr/src/man/man1m/krb5kdc.1m
+++ b/usr/src/man/man1m/krb5kdc.1m
@@ -4,14 +4,14 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH krb5kdc 1M "24 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH KRB5KDC 1M "Oct 24, 2007"
 .SH NAME
 krb5kdc \- KDC daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/krb5/krb5kdc\fR [\fB-d\fR \fIdbpath\fR] [\fB-r\fR \fIrealm\fR]  [\fB-m\fR] 
-     [\fB-k\fR \fImasterenctype\fR] [\fB-M\fR \fImasterkeyname\fR] 
+\fB/usr/lib/krb5/krb5kdc\fR [\fB-d\fR \fIdbpath\fR] [\fB-r\fR \fIrealm\fR]  [\fB-m\fR]
+     [\fB-k\fR \fImasterenctype\fR] [\fB-M\fR \fImasterkeyname\fR]
      [\fB-p\fR \fIport\fR] [\fB-n\fR] [\fB-x\fR \fIdb_args\fR]...
 .fi
 
@@ -30,7 +30,6 @@ Prior to running \fBkrb5kdc\fR, you must initialize the Kerberos database using
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdbpath\fR\fR
 .ad
@@ -41,7 +40,6 @@ Specify the path to the database; default value is \fB/var/krb5\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR \fImasterenctype\fR\fR
 .ad
@@ -55,7 +53,6 @@ Specify the encryption type for encrypting the database. The default value is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
@@ -66,7 +63,6 @@ Specify that the master key for the database is to be entered manually.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR \fImasterkeyname\fR\fR
 .ad
@@ -77,7 +73,6 @@ Specify the principal to retrieve the master Key for the database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -88,7 +83,6 @@ Specify that \fBkrb5kdc\fR should not detach from the terminal.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIport\fR\fR
 .ad
@@ -100,7 +94,6 @@ requests.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrealm\fR\fR
 .ad
@@ -111,7 +104,6 @@ Specify the realm name; default is the local realm name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fIdb_args\fR\fR
 .ad
@@ -121,7 +113,6 @@ Pass database-specific arguments to \fBkadmin\fR. Supported arguments are for
 the LDAP plug-in. These arguments are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbinddn\fR=\fIbinddn\fR\fR
 .ad
@@ -135,7 +126,6 @@ the \fBldap_kdc_dn\fR parameter setting in \fBkrb5.conf\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbindpwd\fR=\fIbindpwd\fR\fR
 .ad
@@ -148,7 +138,6 @@ not to use this option. Instead, the password can be stashed using the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnconns\fR=\fInum\fR\fR
 .ad
@@ -159,7 +148,6 @@ Specifies the number of connections to be maintained per LDAP server.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhost\fR=\fIldapuri\fR\fR
 .ad
@@ -173,7 +161,6 @@ Specifies, by an LDAP URI, the LDAP server to which to connect.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/principal.db\fR\fR
 .ad
@@ -184,7 +171,6 @@ Kerberos principal database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/principal.kadm5\fR\fR
 .ad
@@ -195,7 +181,6 @@ Kerberos administrative database. This file contains policy information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/krb5/principal.kadm5.lock\fR\fR
 .ad
@@ -208,7 +193,6 @@ does \fInot\fR exist).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/kdc.conf\fR\fR
 .ad
@@ -219,7 +203,6 @@ does \fInot\fR exist).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/kpropd.acl\fR\fR
 .ad
@@ -246,7 +229,6 @@ The following signal has the specified effect when sent to the server process
 using the \fBkill\fR(1)command:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSIGHUP\fR\fR
 .ad
diff --git a/usr/src/man/man1m/ksslcfg.1m b/usr/src/man/man1m/ksslcfg.1m
index f36b76eeb8..d70ff33c94 100644
--- a/usr/src/man/man1m/ksslcfg.1m
+++ b/usr/src/man/man1m/ksslcfg.1m
@@ -3,33 +3,33 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ksslcfg 1M "27 May 2008" "SunOS 5.11" "System Administration Commands"
+.TH KSSLCFG 1M "May 27, 2008"
 .SH NAME
 ksslcfg \- enable and configure SMF instance of Kernel SSL
 .SH SYNOPSIS
 .LP
 .nf
-\fBksslcfg\fR create \fB-f\fR pkcs11 \fB-T\fR \fItoken_label\fR \fB-C\fR \fIcertificate_label\fR 
-     [\fB-d\fR \fIsofttoken_directory\fR] 
-     [\fB-p\fR \fIpassword_file\fR [\fB-u\fR \fIusername\fR]] 
-     [\fB-h\fR \fIca_certchain_file\fR] [\fB-c\fR \fIciphersuites\fR] 
-     [\fB-t\fR \fIssl_session_cache_timeout\fR] 
+\fBksslcfg\fR create \fB-f\fR pkcs11 \fB-T\fR \fItoken_label\fR \fB-C\fR \fIcertificate_label\fR
+     [\fB-d\fR \fIsofttoken_directory\fR]
+     [\fB-p\fR \fIpassword_file\fR [\fB-u\fR \fIusername\fR]]
+     [\fB-h\fR \fIca_certchain_file\fR] [\fB-c\fR \fIciphersuites\fR]
+     [\fB-t\fR \fIssl_session_cache_timeout\fR]
      [\fB-z\fR \fIssl_session_cache_size\fR] [\fB-v\fR] \fB-x\fR \fIproxy_port\fR [\fIhost\fR] \fIssl_port\fR
 .fi
 
 .LP
 .nf
-\fBksslcfg\fR create \fB-f\fR pkcs12 \fB-i\fR \fIcert_and_key_pk12file\fR 
-     [\fB-p\fR \fIpassword_file\fR [\fB-u\fR \fIusername\fR]] 
-     [\fB-c\fR \fIciphersuites\fR] [\fB-t\fR \fIssl_session_cache_timeout\fR] 
+\fBksslcfg\fR create \fB-f\fR pkcs12 \fB-i\fR \fIcert_and_key_pk12file\fR
+     [\fB-p\fR \fIpassword_file\fR [\fB-u\fR \fIusername\fR]]
+     [\fB-c\fR \fIciphersuites\fR] [\fB-t\fR \fIssl_session_cache_timeout\fR]
      [\fB-z\fR \fIssl_session_cache_size\fR] [\fB-v\fR] \fB-x\fR \fIproxy_port\fR [\fIhost\fR] \fIssl_port\fR
 .fi
 
 .LP
 .nf
-\fBksslcfg\fR create \fB-f\fR pem \fB-i\fR \fIcert_and_key_pemfile\fR 
-     [\fB-p\fR \fIpassword_file\fR [\fB-u\fR \fIusername\fR]] 
-     [\fB-c\fR \fIciphersuites\fR] [\fB-t\fR \fIssl_session_cache_timeout\fR] 
+\fBksslcfg\fR create \fB-f\fR pem \fB-i\fR \fIcert_and_key_pemfile\fR
+     [\fB-p\fR \fIpassword_file\fR [\fB-u\fR \fIusername\fR]]
+     [\fB-c\fR \fIciphersuites\fR] [\fB-t\fR \fIssl_session_cache_timeout\fR]
      [\fB-z\fR \fIssl_session_cache_size\fR] [\fB-v\fR] \fB-x\fR \fIproxy_port\fR [\fIhost\fR] \fIssl_port\fR
 .fi
 
@@ -90,7 +90,6 @@ dependencies of other services.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIciphersuites\fR\fR
 .ad
@@ -115,7 +114,6 @@ rsa_des_cbc_sha
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIkey_format\fR\fR
 .ad
@@ -127,7 +125,6 @@ options are \fBpkcs11\fR, \fBpkcs12\fR, and \fBpem\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIkey_and_certificate_file\fR\fR
 .ad
@@ -144,7 +141,6 @@ and so on.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR \fIcertificate_label\fR\fR
 .ad
@@ -159,7 +155,6 @@ token specified by \fB-T\fR. This option is to be used only with \fB-f\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIsofttoken_directory\fR\fR
 .ad
@@ -173,7 +168,6 @@ default location of the PKCS#11 softtoken directory (\fB$HOME/.sunw\fR). See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIca_certchain_file\fR\fR
 .ad
@@ -187,7 +181,6 @@ the server certificate (specified with the \fB-C\fR option), from
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIpassword_file\fR\fR
 .ad
@@ -200,7 +193,6 @@ to authenticate the user to the PKCS #11 token.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fIssl_session_cache_timeout\fR\fR
 .ad
@@ -213,7 +205,6 @@ The timeout value, in seconds, for an SSL session. It corresponds to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fItoken_label\fR\fR
 .ad
@@ -226,7 +217,6 @@ tokens available.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIusername\fR\fR
 .ad
@@ -238,7 +228,6 @@ will try to read the password file as root.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -249,7 +238,6 @@ Verbose mode.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
@@ -260,7 +248,6 @@ Displays the version.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fIproxy_port\fR\fR
 .ad
@@ -273,7 +260,6 @@ external HTTP packets are delivered to this port.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-z\fR \fIssl_session_cache_size\fR\fR
 .ad
@@ -286,7 +272,6 @@ is not specified, the default is 5000 entries.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-?\fR \fI\fR\fR
 .ad
@@ -298,12 +283,10 @@ Displays the usage of the command.
 .SH OPERANDS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB[\fIhost\fR] [\fIssl_port\fR]\fR\fR
 .ad
 .RS 21n
-.rt  
 The address and the port of the web server for which the kernel SSL entry is
 created. If \fIhost\fR is omitted, the entry will be used for all requests that
 arrived at the \fIssl_port\fR, regardless of the destination address. Both a
@@ -384,23 +367,19 @@ The following command disables and deletes an instance.
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -412,13 +391,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/kstat.1m b/usr/src/man/man1m/kstat.1m
index 5e58b2dad4..02decab8e0 100644
--- a/usr/src/man/man1m/kstat.1m
+++ b/usr/src/man/man1m/kstat.1m
@@ -3,21 +3,21 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH kstat 1M "23 Mar 2009" "SunOS 5.11" "System Administration Commands"
+.TH KSTAT 1M "Mar 23, 2009"
 .SH NAME
 kstat \- display kernel statistics
 .SH SYNOPSIS
 .LP
 .nf
-\fBkstat\fR [\fB-lpq\fR] [\fB-T\fR u | d ] [\fB-c\fR \fIclass\fR] [\fB-m\fR \fImodule\fR] 
-     [\fB-i\fR \fIinstance\fR] [\fB-n\fR \fIname\fR] [\fB-s\fR \fIstatistic\fR] 
+\fBkstat\fR [\fB-lpq\fR] [\fB-T\fR u | d ] [\fB-c\fR \fIclass\fR] [\fB-m\fR \fImodule\fR]
+     [\fB-i\fR \fIinstance\fR] [\fB-n\fR \fIname\fR] [\fB-s\fR \fIstatistic\fR]
      [interval [count]]
 .fi
 
 .LP
 .nf
-\fBkstat\fR [\fB-lpq\fR] [\fB-T\fR u | d ] [\fB-c\fR \fIclass\fR] 
-     [\fImodule\fR:\fIinstance\fR:\fIname\fR:\fIstatistic\fR]... 
+\fBkstat\fR [\fB-lpq\fR] [\fB-T\fR u | d ] [\fB-c\fR \fIclass\fR]
+     [\fImodule\fR:\fIinstance\fR:\fIname\fR:\fIstatistic\fR]...
      [interval [count]]
 .fi
 
@@ -63,68 +63,56 @@ options may be specified as a shell glob pattern, or a Perl regular expression
 enclosed in '/' characters.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIclass\fR\fR
 .ad
 .RS 16n
-.rt  
 Displays only kstats that match the specified class. \fIclass\fR is a
 kernel-defined string which classifies the "type" of the kstat.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIinstance\fR\fR
 .ad
 .RS 16n
-.rt  
 Displays only kstats that match the specified instance.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 16n
-.rt  
 Lists matching kstat names without displaying values.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fImodule\fR\fR
 .ad
 .RS 16n
-.rt  
 Displays only kstats that match the specified module.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fIname\fR\fR
 .ad
 .RS 16n
-.rt  
 Displays only kstats that match the specified name.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 16n
-.rt  
 Displays output in parseable format. All example output in this document is
 given in this format. If this option is not specified, \fBkstat\fR produces
 output in a human-readable, table format.
@@ -132,35 +120,29 @@ output in a human-readable, table format.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
 .RS 16n
-.rt  
 Displays no output, but return appropriate exit status for matches against
 given criteria.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIstatistic\fR\fR
 .ad
 .RS 16n
-.rt  
 Displays only kstats that match the specified statistic.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR d | u\fR
 .ad
 .RS 16n
-.rt  
 Displays a time stamp before each statistics block, either in \fBdate\fR(1)
 format (\fBd\fR) or as an alphanumeric representation of the value returned by
 \fBtime\fR(2) (\fBu\fR).
@@ -172,7 +154,6 @@ format (\fBd\fR) or as an alphanumeric representation of the value returned by
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fImodule\fR:\fIinstance\fR:\fIname\fR:\fIstatistic\fR\fR
 .ad
@@ -188,7 +169,6 @@ specifier.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIinterval\fR\fR
 .ad
@@ -199,7 +179,6 @@ The number of seconds between reports.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcount\fR\fR
 .ad
@@ -263,7 +242,7 @@ cpu_stat:3:cpu_stat3:intrthread 59626
 .nf
 example$ \fBkstat -p :::state ':::avenrun*'\fR
 example$ \fBkstat -p :::state :::/^avenrun/\fR
- 
+
 cpu_info:0:cpu_info0:state      on-line
 cpu_info:1:cpu_info1:state      on-line
 cpu_info:2:cpu_info2:state      on-line
@@ -284,11 +263,11 @@ example$ \fBkstat -p 'unix:0:system_misc:avenrun*' 1 3\fR
 unix:0:system_misc:avenrun_15min        15
 unix:0:system_misc:avenrun_1min 11
 unix:0:system_misc:avenrun_5min 21
- 
+
 unix:0:system_misc:avenrun_15min        15
 unix:0:system_misc:avenrun_1min 11
 unix:0:system_misc:avenrun_5min 21
- 
+
 unix:0:system_misc:avenrun_15min        15
 unix:0:system_misc:avenrun_1min 11
 unix:0:system_misc:avenrun_5min 21
@@ -306,7 +285,7 @@ Thu Jul 22 19:39:50 1999
 unix:0:system_misc:avenrun_15min        12
 unix:0:system_misc:avenrun_1min 0
 unix:0:system_misc:avenrun_5min 11
- 
+
 Thu Jul 22 19:39:55 1999
 unix:0:system_misc:avenrun_15min        12
 unix:0:system_misc:avenrun_1min 0
@@ -335,57 +314,47 @@ unix:0:system_misc:avenrun_5min 18
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 One or more statistics were matched.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 No statistics were matched.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Invalid command line options were specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 5n
-.rt  
 A fatal error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/kstat\fR\fR
 .ad
 .RS 14n
-.rt  
 kernel statistics driver
 .RE
 
diff --git a/usr/src/man/man1m/ktkt_warnd.1m b/usr/src/man/man1m/ktkt_warnd.1m
index 95febe759f..4605b6570e 100644
--- a/usr/src/man/man1m/ktkt_warnd.1m
+++ b/usr/src/man/man1m/ktkt_warnd.1m
@@ -4,13 +4,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ktkt_warnd 1M "21 Mar 2005" "SunOS 5.11" "System Administration Commands"
+.TH KTKT_WARND 1M "Mar 21, 2005"
 .SH NAME
 ktkt_warnd \- Kerberos warning daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/krb5/ktkt_warnd\fR 
+\fB/usr/lib/krb5/ktkt_warnd\fR
 .fi
 
 .SH DESCRIPTION
@@ -27,12 +27,10 @@ TGT.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/krb5/warn.conf\fR\fR
 .ad
 .RS 23n
-.rt  
 Kerberos warning configuration file
 .RE
 
@@ -44,13 +42,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/labelit.1m b/usr/src/man/man1m/labelit.1m
index e1f203ea8b..914d56fe52 100644
--- a/usr/src/man/man1m/labelit.1m
+++ b/usr/src/man/man1m/labelit.1m
@@ -4,13 +4,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH labelit 1M "31 Oct 2000" "SunOS 5.11" "System Administration Commands"
+.TH LABELIT 1M "Oct 31, 2000"
 .SH NAME
 labelit \- list or provide labels for file systems
 .SH SYNOPSIS
 .LP
 .nf
-\fBlabelit\fR [\fB-F\fR \fIFSType\fR] [\fB-V\fR] [\fB-o\fR \fIFSType-specific-options\fR] \fIspecial\fR 
+\fBlabelit\fR [\fB-F\fR \fIFSType\fR] [\fB-V\fR] [\fB-o\fR \fIFSType-specific-options\fR] \fIspecial\fR
      [\fIoperands\fR]
 .fi
 
@@ -25,12 +25,10 @@ file systems.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fIFSType\fR\fR
 .ad
 .RS 13n
-.rt  
 Specify the \fIFSType\fR on which to operate. The \fIFSType\fR should either be
 specified here or be determinable from \fB/etc/vfstab\fR by matching the
 \fIspecial\fR with an entry in the table. If no matching entry is found, the
@@ -39,12 +37,10 @@ default file system type specified in \fB/etc/default/fs\fR will be used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
 .RS 13n
-.rt  
 Echo complete command line. This option may be used to verify and validate the
 command line. Additional information obtained using a \fB/etc/vfstab\fR lookup
 is included in the output. The command is not executed.
@@ -52,12 +48,10 @@ is included in the output. The command is not executed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 13n
-.rt  
 Specify \fIFSType\fR-specific options. See the manual page for the
 \fBlabelit\fR module specific to the file system type.
 .RE
@@ -69,24 +63,20 @@ The following operands are supported. If no operands are specified,
 \fBlabelit\fR will display the value of the labels.
 .sp
 .ne 2
-.mk
 .na
 \fB\fIspecial\fR\fR
 .ad
 .RS 12n
-.rt  
 The disk partition (for example, \fB/dev/rdsk/c0t3d0s6\fR). The device may not
 be on a remote machine.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIoperands\fR\fR
 .ad
 .RS 12n
-.rt  
 \fIFSType\fR-specific operands. Consult the manual page of the
 \fIFSType\fR-specific \fBlabelit\fR command for detailed descriptions.
 .RE
@@ -102,51 +92,42 @@ when encountering files greater than or equal to 2 Gbyte ( 2^31 bytes).
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Write or display of labels was successful.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-zero\fR
 .ad
 .RS 12n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vfstab\fR\fR
 .ad
 .RS 19n
-.rt  
 List of default parameters for each file system.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/fs\fR\fR
 .ad
 .RS 19n
-.rt  
 Default local file system type. Default values can be set for the following
 flags in \fB/etc/default/fs\fR. For example:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLOCAL=ufs\fR\fR
 .ad
@@ -155,7 +136,6 @@ flags in \fB/etc/default/fs\fR. For example:
 \fB\fBLOCAL\fR\fR
 .ad
 .RS 13n
-.rt  
 The default partition for a command if no \fIFSType\fR is specified.
 .RE
 
diff --git a/usr/src/man/man1m/labelit_hsfs.1m b/usr/src/man/man1m/labelit_hsfs.1m
index 0d087c434b..0ae31154b2 100644
--- a/usr/src/man/man1m/labelit_hsfs.1m
+++ b/usr/src/man/man1m/labelit_hsfs.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH labelit_hsfs 1M "20 Mar 1992" "SunOS 5.11" "System Administration Commands"
+.TH LABELIT_HSFS 1M "Mar 20, 1992"
 .SH NAME
 labelit_hsfs \- provide and print labels for hsfs file systems
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/labelit\fR \fB-F\fR hsfs [\fIgeneric_options\fR] 
+\fB/usr/sbin/labelit\fR \fB-F\fR hsfs [\fIgeneric_options\fR]
      [\fB-o\fR \fIspecific_options\fR] \fIspecial\fR
 .fi
 
@@ -33,12 +33,10 @@ The \fIspecial\fR name should be the physical disk section (for example,
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 6n
-.rt  
 Use one or more of the following  \fIname\fR=\fIvalue\fR pairs separated by
 commas (with no intervening spaces) to specify values for specific label
 fields. According to the ISO 9660 specification, only certain sets of
@@ -48,100 +46,82 @@ refers to the characters `A' through `Z', the digits `0' through `9', and the
 `0' through `9', space, and the following characters: !"%&'()*+,-./:;<=>?_.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBabsfile=\fR\fR
 .ad
 .RS 13n
-.rt  
 Abstract file identifier, d-characters, 37 characters maximum.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBapplid=\fR\fR
 .ad
 .RS 13n
-.rt  
 Application identifier, d-characters, 128 characters maximum.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbibfile=\fR\fR
 .ad
 .RS 13n
-.rt  
 Bibliographic file identifier, d-characters, 37 characters maximum.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcopyfile=\fR\fR
 .ad
 .RS 13n
-.rt  
 Copyright file identifier, d-characters, 128 maximum.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprepid=\fR\fR
 .ad
 .RS 13n
-.rt  
 Data preparer identifier, d-characters, 128 maximum.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpubid=\fR\fR
 .ad
 .RS 13n
-.rt  
 Publisher identifier, d-characters, 128 maximum.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsysid=\fR\fR
 .ad
 .RS 13n
-.rt  
 System identifier, a-characters, 32 maximum.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvolid=\fR\fR
 .ad
 .RS 13n
-.rt  
 Volume identifier, d-characters, 32 maximum.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvolsetid=\fR\fR
 .ad
 .RS 13n
-.rt  
 Volume set identifier, d-characters, 128 maximum.
 .RE
 
diff --git a/usr/src/man/man1m/labelit_udfs.1m b/usr/src/man/man1m/labelit_udfs.1m
index 32590d80e9..41f6449b7a 100644
--- a/usr/src/man/man1m/labelit_udfs.1m
+++ b/usr/src/man/man1m/labelit_udfs.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH labelit_udfs 1M "31 Oct 2000" "SunOS 5.11" "System Administration Commands"
+.TH LABELIT_UDFS 1M "Oct 31, 2000"
 .SH NAME
 labelit_udfs \- provide and print labels for udf file systems
 .SH SYNOPSIS
 .LP
 .nf
-\fBlabelit\fR \fB-F \fR udfs [\fIgeneric_options\fR] [\fB-o\fR \fIspecific_options\fR] \fIspecial\fR 
+\fBlabelit\fR \fB-F \fR udfs [\fIgeneric_options\fR] [\fB-o\fR \fIspecific_options\fR] \fIspecial\fR
      [\fIfsname\fR \fIvolume\fR]
 .fi
 
@@ -25,34 +25,28 @@ volumes.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIgeneric_options\fR\fR
 .ad
 .RS 23n
-.rt  
 Specify \fIgeneric_options\fR supported by the generic \fBlabelit\fR command.
 See \fBlabelit\fR(1M) for descriptions of supported options.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIspecific_options\fR\fR
 .ad
 .RS 23n
-.rt  
 Specify udfs-file-system-specific options in a  comma-separated list with no
 intervening spaces. The following \fIspecific_options\fR are available:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlvinfo1=\fR\fIstring\fR\fR
 .ad
 .RS 18n
-.rt  
 Specify information to be inserted in the \fBLVInfo1\fR field of the
 Implementation Use Volume Descriptor. Information in \fBLVInfo1\fR is generally
 used to identify the person creating the file system. The maximum length of the
@@ -61,12 +55,10 @@ string specified is 35 bytes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlvinfo2=\fR\fIstring\fR\fR
 .ad
 .RS 18n
-.rt  
 Specify information to be inserted into the \fBLVInfo2\fR field of the
 Implementation Use Volume Descriptor. Information in \fBLVInfo2\fR is generally
 used to identify the organization responsible for creating the file system. The
@@ -75,12 +67,10 @@ maximum length of the string specified is 35 bytes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlvinfo3=\fR\fIstring\fR\fR
 .ad
 .RS 18n
-.rt  
 Specify information to be inserted into the \fBLVInfo3\fR field of the
 Implementation Use Volume Descriptor. Information in \fBLVInfo3\fR is generally
 used to identify the contact information for the medium. The maximum length of
@@ -95,36 +85,30 @@ the string specified is 35 bytes.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIspecial\fR\fR
 .ad
 .RS 11n
-.rt  
 Specify \fIspecial\fR as the physical disk slice, for   example,
 \fB/dev/rdsk/c0t0d0s6\fR.   The device can not be on a remote machine.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfsname\fR\fR
 .ad
 .RS 11n
-.rt  
 Specify \fIfsname\fR as the mount point, (for example, \fBroot\fR, \fBu1\fR,
 and so forth), of the file system.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIvolume\fR\fR
 .ad
 .RS 11n
-.rt  
 Specify \fIvolume\fR as the physical volume name.
 .RE
 
@@ -139,23 +123,19 @@ specified, \fBlabelit\fR prints the current values of \fIfsname\fR,
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB0\fR
 .ad
 .RS 12n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-zero\fR
 .ad
 .RS 12n
-.rt  
 An error occurred.
 .RE
 
diff --git a/usr/src/man/man1m/labelit_ufs.1m b/usr/src/man/man1m/labelit_ufs.1m
index c3d6cd45e9..9111096be5 100644
--- a/usr/src/man/man1m/labelit_ufs.1m
+++ b/usr/src/man/man1m/labelit_ufs.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH labelit_ufs 1M "15 Apr 2003" "SunOS 5.11" "System Administration Commands"
+.TH LABELIT_UFS 1M "Apr 15, 2003"
 .SH NAME
 labelit_ufs \- provide and print labels for ufs file systems
 .SH SYNOPSIS
@@ -25,12 +25,10 @@ programs such as \fBvolcopy\fR(1M).
 The following option is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIgeneric_options\fR\fR
 .ad
 .RS 19n
-.rt  
 options supported by the generic  \fBlabelit\fR command. See
 \fBlabelit\fR(1M).
 .RE
@@ -41,36 +39,30 @@ options supported by the generic  \fBlabelit\fR command. See
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIspecial\fR\fR
 .ad
 .RS 11n
-.rt  
 name should be the physical disk section (for example, \fB/dev/dsk/c0d0s6\fR).
 The device may not be on a remote machine.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfsname\fR\fR
 .ad
 .RS 11n
-.rt  
 represents the mount point (for example, \fBroot\fR, \fBu1\fR, and so on) of
 the file system.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIvolume\fR\fR
 .ad
 .RS 11n
-.rt  
 may be used to represent the physical volume name.
 .RE
 
@@ -85,23 +77,19 @@ limited to six or fewer characters.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Write or display of labels was successful.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-zero\fR
 .ad
 .RS 12n
-.rt  
 An error occurred.
 .RE
 
diff --git a/usr/src/man/man1m/latencytop.1m b/usr/src/man/man1m/latencytop.1m
index 37c3cf3901..0cf5625839 100644
--- a/usr/src/man/man1m/latencytop.1m
+++ b/usr/src/man/man1m/latencytop.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH latencytop 1M "29 Sep 2009" "SunOS 5.11" "System Administration Commands"
+.TH LATENCYTOP 1M "Sep 29, 2009"
 .SH NAME
 latencytop \- report latency-related statistics in system and in applications
 .SH SYNOPSIS
@@ -50,7 +50,6 @@ or R key. The interval time is restored to the default or to a specified value
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR, \fB--feature\fR [no]\fIfeature1\fR,[no]\fIfeature2\fR,...\fR
 .ad
@@ -60,7 +59,6 @@ Enables/disables features in LatencyTOP. Features can be only one of the
 following:
 .sp
 .ne 2
-.mk
 .na
 \fB[\fBno\fR]\fBfilter\fR\fR
 .ad
@@ -72,7 +70,6 @@ Filter large interruptible latencies, for example, sleep. The default is
 
 .sp
 .ne 2
-.mk
 .na
 \fB[\fBno\fR]\fBsched\fR\fR
 .ad
@@ -83,7 +80,6 @@ Monitors \fBsched\fR (PID=0). The default is \fBoff\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB[\fBno\fR]\fBsobj\fR\fR
 .ad
@@ -94,7 +90,6 @@ Monitors synchronize objects. The default is \fBon\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB[\fBno\fR]\fBlow\fR\fR
 .ad
@@ -109,7 +104,6 @@ workloads such as a very busy web server. The default is \fBoff\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -120,7 +114,6 @@ Displays the command's usage.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR \fIlog_level\fR\fR
 .ad
@@ -129,34 +122,28 @@ Displays the command's usage.
 Specifies the level of logging in the log file. Valid values are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 \fBnone\fR (default)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 \fBunknown\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 \fBall\fR
 .RE
 
@@ -164,7 +151,6 @@ Specifies the level of logging in the log file. Valid values are:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR [\fIlog_interval\fR]\fR
 .ad
@@ -176,7 +162,6 @@ Writes data to the log file every \fIlog_interval\fR seconds;
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIlog_file\fR\fR
 .ad
@@ -188,7 +173,6 @@ Specifies the log file where output will be written. The default log file is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fIinterval\fR\fR
 .ad
@@ -273,7 +257,6 @@ synchronization objects.
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -284,7 +267,6 @@ Successful operation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
@@ -301,15 +283,14 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Architecturex86, SPARC
+Architecture	x86, SPARC
 _
-Interface StabilityVolatile
+Interface Stability	Volatile
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ldap_cachemgr.1m b/usr/src/man/man1m/ldap_cachemgr.1m
index 10cc607d29..c4089a78f6 100644
--- a/usr/src/man/man1m/ldap_cachemgr.1m
+++ b/usr/src/man/man1m/ldap_cachemgr.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ldap_cachemgr 1M "7 Oct 2008" "SunOS 5.11" "System Administration Commands"
+.TH LDAP_CACHEMGR 1M "Oct 7, 2008"
 .SH NAME
 ldap_cachemgr \- LDAP daemon to manage client configuration for LDAP based
 Network Information Service lookups
@@ -51,7 +51,6 @@ transparently to the running version.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR\fR
 .ad
@@ -63,7 +62,6 @@ option executable without superuser privileges.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlog-file\fR\fR
 .ad
@@ -108,7 +106,6 @@ example# pkill -HUP ldap_cachemgr
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/ldap/cachemgr.log\fR\fR
 .ad
@@ -119,7 +116,6 @@ Default log file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/ldap/ldap_client_file\fR\fR
 .ad
diff --git a/usr/src/man/man1m/ldapaddent.1m b/usr/src/man/man1m/ldapaddent.1m
index 6268d2b179..47210daa8b 100644
--- a/usr/src/man/man1m/ldapaddent.1m
+++ b/usr/src/man/man1m/ldapaddent.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ldapaddent 1M "4 May 2009" "SunOS 5.11" "System Administration Commands"
+.TH LDAPADDENT 1M "May 4, 2009"
 .SH NAME
 ldapaddent \- create LDAP entries from corresponding /etc files
 .SH SYNOPSIS
@@ -165,7 +165,6 @@ LDAP server. The \fBldapaddent\fR command skips any duplicate entries.
 The \fBldapaddent\fR command supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIauthenticationMethod\fR\fR
 .ad
@@ -237,7 +236,6 @@ See \fBnsswitch.conf\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR\ \fIbaseDN\fR\fR
 .ad
@@ -252,7 +250,6 @@ used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
@@ -265,7 +262,6 @@ authentication problem.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\ \fIbindDN\fR\fR
 .ad
@@ -277,7 +273,6 @@ Create an entry which has write permission to the \fIbaseDN\fR. When used with
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -289,7 +284,6 @@ the given database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfilename\fR\fR
 .ad
@@ -300,7 +294,6 @@ Indicates input file to read in an \fB/etc/\fR file format.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fILDAP_server\fR[:\fIserverPort\fR]\fR
 .ad
@@ -315,7 +308,6 @@ default LDAP server port number is \fB636\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-j\fR\ \fIpasswdFile\fR\fR
 .ad
@@ -329,7 +321,6 @@ the \fB-w\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR\ \fIdomainName\fR\fR
 .ad
@@ -341,7 +332,6 @@ default domain name will be used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-N\fR\ \fIprofileName\fR\fR
 .ad
@@ -354,7 +344,6 @@ exist on the server specified by \fB-h\fR option. Otherwise, a default
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR\ \fIcertifPath\fR\fR
 .ad
@@ -368,7 +357,6 @@ which is specified in the \fBauthenticationMethod\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
@@ -381,7 +369,6 @@ valid, as the actual password appears in a \fBshadow\fR file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR\ \fIbindPassword\fR\fR
 .ad
@@ -401,7 +388,6 @@ password.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -416,7 +402,6 @@ Verbose.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdatabase\fR\fR
 .ad
@@ -518,7 +503,6 @@ example# \fBldapaddent -h 10.10.10.10:3890 \e
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -529,7 +513,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB>\fB0\fR\fR
 .ad
@@ -541,7 +524,6 @@ An error occurred.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/ldap/ldap_client_file\fR\fR
 .ad
@@ -564,13 +546,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ldapclient.1m b/usr/src/man/man1m/ldapclient.1m
index b73a9340cc..75fa32e9e3 100644
--- a/usr/src/man/man1m/ldapclient.1m
+++ b/usr/src/man/man1m/ldapclient.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ldapclient 1M "14 Feb 2009" "SunOS 5.11" "System Administration Commands"
+.TH LDAPCLIENT 1M "Feb 14, 2009"
 .SH NAME
 ldapclient \- initialize LDAP client machine or output an LDAP client profile
 in LDIF format
@@ -258,7 +258,6 @@ appropriate certificate databases to use TLS.
 The following commands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinit\fR\fR
 .ad
@@ -269,7 +268,6 @@ Initialize client from a profile on a server.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmanual\fR\fR
 .ad
@@ -280,7 +278,6 @@ Manually initialize client with the specified attribute values.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmod\fR\fR
 .ad
@@ -292,7 +289,6 @@ of the client.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist\fR\fR
 .ad
@@ -304,7 +300,6 @@ readable form.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBuninit\fR\fR
 .ad
@@ -316,7 +311,6 @@ initialize the client.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgenprofile\fR\fR
 .ad
@@ -332,7 +326,6 @@ directory for clients to use, with the \fBinit\fR form of this command.
 The following attributes are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadminDN\fR\fR
 .ad
@@ -346,7 +339,6 @@ default value.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadminPassword\fR\fR
 .ad
@@ -359,7 +351,6 @@ is no default value.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBattributeMap\fR\fR
 .ad
@@ -384,7 +375,6 @@ the LDAP client would use the LDAP attribute \fBemployeeNumber\fR rather than
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBauthenticationMethod\fR\fR
 .ad
@@ -411,7 +401,6 @@ ipnodes: dns files
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbindTimeLimit\fR\fR
 .ad
@@ -423,7 +412,6 @@ operation. Set this to a positive integer. The default value is 30.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcertificatePath\fR\fR
 .ad
@@ -437,7 +425,6 @@ which is specified in the \fBauthenticationMethod\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcredentialLevel\fR\fR
 .ad
@@ -457,7 +444,6 @@ self credential level is specified, the \fBauthenticationMethod\fR must be
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdefaultSearchBase\fR\fR
 .ad
@@ -470,7 +456,6 @@ Specify the default search base DN. There is no default. The
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdefaultSearchScope=one | sub\fR\fR
 .ad
@@ -483,7 +468,6 @@ default can be overridden for a given service by specifying a
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdefaultServerList\fR\fR
 .ad
@@ -532,7 +516,6 @@ resolve the host address.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdomainName\fR\fR
 .ad
@@ -545,7 +528,6 @@ initialization.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBenableShadowUpdate=true | false\fR\fR
 .ad
@@ -558,7 +540,6 @@ Specify whether the client is allowed to update shadow information. If set to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfollowReferrals=true | false\fR\fR
 .ad
@@ -571,7 +552,6 @@ The default is true.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBobjectclassMap\fR\fR
 .ad
@@ -585,7 +565,7 @@ The default value for all services is \fINULL\fR. In the example,
 .sp
 .in +2
 .nf
-objectclassMap=passwd:posixAccount=unixAccount 
+objectclassMap=passwd:posixAccount=unixAccount
 .fi
 .in -2
 .sp
@@ -597,7 +577,6 @@ multivalued attribute.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpreferredServerList\fR\fR
 .ad
@@ -647,7 +626,6 @@ resolve the host address.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprofileName\fR\fR
 .ad
@@ -661,7 +639,6 @@ is the name of the profile to be generated. The default value is \fBdefault\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprofileTTL\fR\fR
 .ad
@@ -677,7 +654,6 @@ The default value is 12 hours.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBproxyDN\fR\fR
 .ad
@@ -690,7 +666,6 @@ authentication methods requires a bind DN. There is no default value.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBproxyPassword\fR\fR
 .ad
@@ -703,7 +678,6 @@ DN. There is no default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsearchTimeLimit\fR\fR
 .ad
@@ -715,7 +689,6 @@ default is 30 seconds. The server may have its own search time limit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBserviceAuthenticationMethod\fR\fR
 .ad
@@ -749,7 +722,6 @@ attribute.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBserviceCredentialLevel\fR\fR
 .ad
@@ -764,7 +736,6 @@ attribute.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBserviceSearchDescriptor\fR\fR
 .ad
@@ -794,7 +765,6 @@ the LDAP client would do a one level search in
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fBattrName=\fR\fIattrValue\fR\fR
 .ad
@@ -806,7 +776,6 @@ possible attribute names and values.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR \fIbindDN\fR\fR
 .ad
@@ -817,7 +786,6 @@ Specifies an entry that has read permission for the requested database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-j\fR \fIpasswdFile\fR\fR
 .ad
@@ -831,7 +799,6 @@ the \fB-w\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
@@ -842,7 +809,6 @@ Quiet mode. No output is generated.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -853,7 +819,6 @@ Verbose output.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR \fIbindPassword\fR\fR
 .ad
@@ -873,7 +838,6 @@ password.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-y\fR \fIpasswdFile\fR\fR
 .ad
@@ -886,7 +850,6 @@ This option is mutually exclusive of the \fB-a\fR \fIproxyPassword\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-z\fR \fIadminrPasswdFile\fR\fR
 .ad
@@ -903,7 +866,6 @@ This option is mutually exclusive of the \fB-a\fR \fIadminPassword\fR option.
 The following operand is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fILDAP_server\fR\fR
 .ad
@@ -1070,34 +1032,28 @@ example# \fBldapclient genprofile -a profileName=eng \e
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB0\fR
 .ad
 .RS 5n
-.rt  
 The command successfully executed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB1\fR
 .ad
 .RS 5n
-.rt  
 An error occurred. An error message is output.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB2\fR
 .ad
 .RS 5n
-.rt  
 \fBproxyDN\fR and \fBproxyPassword\fR attributes are required, but they are not
 provided.
 .RE
@@ -1105,7 +1061,6 @@ provided.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/ldap/ldap_client_cred\fR\fR
 .ad
@@ -1122,7 +1077,6 @@ modified manually. Their content is not guaranteed to be human readable. Use
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/defaultdomain\fR\fR
 .ad
@@ -1134,7 +1088,6 @@ servers. See \fBdefaultdomain\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/nsswitch.conf\fR\fR
 .ad
@@ -1145,7 +1098,6 @@ Configuration file for the name-service switch. See \fBnsswitch.conf\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/nsswitch.ldap\fR\fR
 .ad
@@ -1163,13 +1115,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ldmad.1m b/usr/src/man/man1m/ldmad.1m
index 0dca6f2463..49054921df 100644
--- a/usr/src/man/man1m/ldmad.1m
+++ b/usr/src/man/man1m/ldmad.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ldmad 1M "8 Sep 2009" "SunOS 5.11" "System Administration Commands"
+.TH LDMAD 1M "Sep 8, 2009"
 .SH NAME
 ldmad \- Logical Domains Agents daemon
 .SH SYNOPSIS
@@ -32,13 +32,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUnstable
+Interface Stability	Unstable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/link.1m b/usr/src/man/man1m/link.1m
index ed5a8c0a83..5d49d65f29 100644
--- a/usr/src/man/man1m/link.1m
+++ b/usr/src/man/man1m/link.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH link 1M "9 Oct 2002" "SunOS 5.11" "System Administration Commands"
+.TH LINK 1M "Oct 9, 2002"
 .SH NAME
 link, unlink \- link and unlink files and directories
 .SH SYNOPSIS
@@ -57,34 +57,28 @@ by the symbolic link, not to the symbolic link object itself
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIexisting-file\fR\fR
 .ad
 .RS 17n
-.rt  
 Specifies the name of the existing file to be linked.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfile\fR\fR
 .ad
 .RS 17n
-.rt  
 Specifies the name of the file to be unlinked.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fInew-file\fR\fR
 .ad
 .RS 17n
-.rt  
 Specifies the name of newly created (linked) file.
 .RE
 
@@ -103,13 +97,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStandard
+Interface Stability	Standard
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/listdgrp.1m b/usr/src/man/man1m/listdgrp.1m
index 6c0058d707..19155b1d56 100644
--- a/usr/src/man/man1m/listdgrp.1m
+++ b/usr/src/man/man1m/listdgrp.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH listdgrp 1M "5 Jul 1990" "SunOS 5.11" "System Administration Commands"
+.TH LISTDGRP 1M "Jul 5, 1990"
 .SH NAME
 listdgrp \- lists members of a device group
 .SH SYNOPSIS
@@ -41,58 +41,48 @@ example% listdgrp partitions
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Command was syntax incorrect, an invalid option used, or an internal error
 occurred.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 A device group table could not be opened for reading.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 5n
-.rt  
 A device group \fIdgroup\fR could not be found in the device group table.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dgroup.tab\fR\fR
 .ad
 .RS 19n
-.rt  
 Device group table.
 .RE
 
diff --git a/usr/src/man/man1m/listen.1m b/usr/src/man/man1m/listen.1m
index 494538fce2..3082f614f9 100644
--- a/usr/src/man/man1m/listen.1m
+++ b/usr/src/man/man1m/listen.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH listen 1M "3 Apr 1997" "SunOS 5.11" "System Administration Commands"
+.TH LISTEN 1M "Apr 3, 1997"
 .SH NAME
 listen \- network listener daemon
 .SH SYNOPSIS
@@ -66,12 +66,10 @@ For more details about the listener and its administration, see
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fIdevstem\fR\fR
 .ad
 .RS 13n
-.rt  
 The listener will use \fIdevstem\fR as the prefix for the pathname.
 .RE
 
diff --git a/usr/src/man/man1m/lms.1m b/usr/src/man/man1m/lms.1m
index 0504d61df5..b6f2e2292b 100644
--- a/usr/src/man/man1m/lms.1m
+++ b/usr/src/man/man1m/lms.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH lms 1M "3 Mar 2009" "SunOS 5.11" "System Administration Commands"
+.TH LMS 1M "Mar 3, 2009"
 .SH NAME
 lms \- allow applications to access the Intel Active Management Technology
 .SH SYNOPSIS
@@ -52,15 +52,14 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Architecturex86
+Architecture	x86
 _
-Interface StabilityVolatile
+Interface Stability	Volatile
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/locator.1m b/usr/src/man/man1m/locator.1m
index a3e3bf063f..c87f500e02 100644
--- a/usr/src/man/man1m/locator.1m
+++ b/usr/src/man/man1m/locator.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH locator 1M "4 Sept 2001" "SunOS 5.11" "System Administration Commands"
+.TH LOCATOR 1M "Sep 4, 2001"
 .SH NAME
 locator \- location indicator control
 .SH SYNOPSIS
@@ -30,23 +30,19 @@ only the super user can get or set a locator.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 6n
-.rt  
 Turns the locator off.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 6n
-.rt  
 Turns the locator on.
 .RE
 
@@ -93,34 +89,28 @@ message.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Invalid command line input.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 The requested operation failed.
 .RE
 
diff --git a/usr/src/man/man1m/lockfs.1m b/usr/src/man/man1m/lockfs.1m
index badfdfdc14..3807d0461c 100644
--- a/usr/src/man/man1m/lockfs.1m
+++ b/usr/src/man/man1m/lockfs.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH lockfs 1M "2 Jan 2008" "SunOS 5.11" "System Administration Commands"
+.TH LOCKFS 1M "Jan 2, 2008"
 .SH NAME
 lockfs \- change or report file system locks
 .SH SYNOPSIS
@@ -45,7 +45,6 @@ of \fB-a\fR, \fB-f\fR and \fB-v\fR.
 The following options are supported.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -57,7 +56,6 @@ ignored when \fB-a\fR is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIstring\fR\fR
 .ad
@@ -70,7 +68,6 @@ affect when the lock is being set using the \fB-d\fR, \fB-h\fR, \fB-n\fR,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -82,7 +79,6 @@ access that could remove directory entries.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
@@ -98,7 +94,6 @@ systems can be unmounted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -117,7 +112,6 @@ of the locking options is more likely to be of general use.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -130,7 +124,6 @@ systems can be unmounted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -142,7 +135,6 @@ accesses that could change or remove existing directories entries.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
@@ -154,7 +146,6 @@ accesses.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -165,7 +156,6 @@ Enable verbose output.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR\fR
 .ad
@@ -182,7 +172,6 @@ system is write-locked.
 The following operands are supported.
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfile-system\fR\fR
 .ad
@@ -228,13 +217,11 @@ example#  \fB/usr/sbin/lockfs -a\fR
 
 .sp
 .TS
-tab();
-lw(1.83i) lw(1.83i) lw(1.83i) 
-lw(1.83i) lw(1.83i) lw(1.83i) 
-.
-FilesystemLocktype Comment
-/unlock
-/varunlock
+l l l
+l l l .
+Filesystem	Locktype	 Comment
+/	unlock	
+/var	unlock	
 .TE
 
 .sp
@@ -267,13 +254,11 @@ example#  \fB/usr/sbin/lockfs -a\fR
 
 .sp
 .TS
-tab();
-lw(1.83i) lw(1.83i) lw(1.83i) 
-lw(1.83i) lw(1.83i) lw(1.83i) 
-.
-FilesystemLocktypeComment
-/unlock
-/varwritelockfs: write lock example
+l l l
+l l l .
+Filesystem	Locktype	Comment
+/	unlock	
+/var	write	lockfs: write lock example
 .TE
 
 .sp
@@ -305,12 +290,10 @@ example#  \fB/usr/sbin/lockfs /var\fR
 
 .sp
 .TS
-tab();
-lw(1.83i) lw(1.83i) lw(1.83i) 
-lw(1.83i) lw(1.83i) lw(1.83i) 
-.
-FilesystemLocktypeComment
-/varunlocklockfs: unlock example
+l l l
+l l l .
+Filesystem	Locktype	Comment
+/var	unlock	lockfs: unlock example
 .TE
 
 .sp
@@ -332,7 +315,6 @@ example#
 .SH DIAGNOSTICS
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfile system\fR\fB: Not owner\fR\fR
 .ad
@@ -343,7 +325,6 @@ You must be root to use this command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfile system\fR \fB:Deadlock condition detected/avoided\fR\fR
 .ad
@@ -354,7 +335,6 @@ A file is enabled for accounting or swapping, on \fIfile system\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfile system\fR\fB: Device busy\fR\fR
 .ad
diff --git a/usr/src/man/man1m/lockstat.1m b/usr/src/man/man1m/lockstat.1m
index 495b294056..8c7eb17494 100644
--- a/usr/src/man/man1m/lockstat.1m
+++ b/usr/src/man/man1m/lockstat.1m
@@ -3,16 +3,16 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH lockstat 1M "28 Feb 2008" "SunOS 5.11" "System Administration Commands"
+.TH LOCKSTAT 1M "Feb 28, 2008"
 .SH NAME
 lockstat \- report kernel lock and profiling statistics
 .SH SYNOPSIS
 .LP
 .nf
-\fBlockstat\fR [\fB-ACEHI\fR] [\fB-e\fR \fIevent_list\fR] [\fB-i\fR \fIrate\fR] 
-     [\fB-b\fR | \fB-t\fR | \fB-h\fR | \fB-s\fR \fIdepth\fR] [\fB-n\fR \fInrecords\fR] 
-     [\fB-l\fR \fIlock\fR [, \fIsize\fR]] [\fB-d\fR \fIduration\fR] 
-     [\fB-f\fR \fIfunction\fR [, \fIsize\fR]] [\fB-T\fR] [\fB-ckgwWRpP\fR] [\fB-D\fR \fIcount\fR] 
+\fBlockstat\fR [\fB-ACEHI\fR] [\fB-e\fR \fIevent_list\fR] [\fB-i\fR \fIrate\fR]
+     [\fB-b\fR | \fB-t\fR | \fB-h\fR | \fB-s\fR \fIdepth\fR] [\fB-n\fR \fInrecords\fR]
+     [\fB-l\fR \fIlock\fR [, \fIsize\fR]] [\fB-d\fR \fIduration\fR]
+     [\fB-f\fR \fIfunction\fR [, \fIsize\fR]] [\fB-T\fR] [\fB-ckgwWRpP\fR] [\fB-D\fR \fIcount\fR]
      [\fB-o\fR \fIfilename\fR] [\fB-x\fR \fIopt\fR [=val]] \fIcommand\fR [\fIargs\fR]
 .fi
 
@@ -61,7 +61,6 @@ The following options are supported:
 If no event selection options are specified, the default is \fB-C\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR\fR
 .ad
@@ -72,7 +71,6 @@ Watch all lock events. \fB-A\fR is equivalent to \fB-CH\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR\fR
 .ad
@@ -83,7 +81,6 @@ Watch contention events.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-E\fR\fR
 .ad
@@ -94,7 +91,6 @@ Watch error events.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-e\fR \fIevent_list\fR\fR
 .ad
@@ -107,7 +103,6 @@ arguments to get a brief description of all events.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-H\fR\fR
 .ad
@@ -118,7 +113,6 @@ Watch hold events.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR\fR
 .ad
@@ -129,7 +123,6 @@ Watch profiling interrupt events.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-i\fR \fIrate\fR\fR
 .ad
@@ -143,7 +136,6 @@ Hz).
 .SS "Data Gathering"
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fIarg\fR[=\fIval\fR]\fR
 .ad
@@ -158,7 +150,6 @@ an equals sign (=).
 .SS "Data Gathering (Mutually Exclusive)"
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR\fR
 .ad
@@ -169,7 +160,6 @@ Basic statistics: lock, caller, number of events.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -180,7 +170,6 @@ Histogram: Timing plus time-distribution histograms.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-s\fR \fIdepth\fR\fR
 .ad
@@ -191,7 +180,6 @@ Stack trace: Histogram plus stack traces up to \fIdepth\fR frames deep.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
@@ -203,7 +191,6 @@ Timing: Basic plus timing for all events [default].
 .SS "Data Filtering"
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-d\fR \fIduration\fR\fR
 .ad
@@ -214,7 +201,6 @@ Only watch events longer than \fIduration\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-f\fR \fIfunc[,size]\fR\fR
 .ad
@@ -227,7 +213,6 @@ available, or \fB1\fR if not.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-l\fR \fIlock[,size]\fR\fR
 .ad
@@ -240,7 +225,6 @@ symbol size is not available.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-n\fR \fInrecords\fR\fR
 .ad
@@ -251,7 +235,6 @@ Maximum number of data records.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR\fR
 .ad
@@ -263,7 +246,6 @@ Trace (rather than sample) events [off by default].
 .SS "Data Reporting"
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
@@ -274,7 +256,6 @@ Coalesce lock data for lock arrays (for example, \fBpse_mutex[]\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-D\fR \fIcount\fR\fR
 .ad
@@ -285,7 +266,6 @@ Only display the top \fIcount\fR events of each type.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR\fR
 .ad
@@ -304,7 +284,6 @@ issue (1), the default data gathering mode when using \fB-g\fR is \fB-s\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR\fR
 .ad
@@ -315,7 +294,6 @@ Coalesce PCs within functions.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-o\fR \fIfilename\fR\fR
 .ad
@@ -326,7 +304,6 @@ Direct output to \fIfilename\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR\fR
 .ad
@@ -337,7 +314,6 @@ Sort data by (\fIcount * time\fR) product.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
@@ -348,7 +324,6 @@ Parsable output format.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR\fR
 .ad
@@ -359,7 +334,6 @@ Display rates (events per second) rather than counts.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-W\fR\fR
 .ad
@@ -370,7 +344,6 @@ Whichever: distinguish events only by caller, not by lock.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR\fR
 .ad
@@ -385,7 +358,6 @@ Wherever: distinguish events only by lock, not by caller.
 The following headers appear over various columns of data.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCount\fR or \fBops/s\fR\fR
 .ad
@@ -397,7 +369,6 @@ was specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBindv\fR\fR
 .ad
@@ -408,7 +379,6 @@ Percentage of all events represented by this individual event.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgenr\fR\fR
 .ad
@@ -419,7 +389,6 @@ Percentage of all events generated by this function.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcuml\fR\fR
 .ad
@@ -430,7 +399,6 @@ Cumulative percentage; a running total of the individuals.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrcnt\fR\fR
 .ad
@@ -443,7 +411,6 @@ for shared locks (rwlocks held as reader).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnsec\fR\fR
 .ad
@@ -455,7 +422,6 @@ For the profiling event, duration means interrupt latency.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLock\fR\fR
 .ad
@@ -466,7 +432,6 @@ Address of the lock; displayed symbolically if possible.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCPU+PIL\fR\fR
 .ad
@@ -478,7 +443,6 @@ Address of the lock; displayed symbolically if possible.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCaller\fR\fR
 .ad
@@ -800,7 +764,7 @@ Count indv cuml rcnt     nsec Lock               Caller
 Profiling interrupt: 229 events in 10.042 seconds (23 events/sec)
 
 Count indv cuml rcnt     nsec Hottest CPU+PIL    Caller
- 
+
 -------------------------------------------------------------------------
    89  39%  39% 1.00      426 cpu[0]+6           sync_stream_buf
    64  28%  67% 1.00      398 cpu[0]+6           sbus_intr_wrapper
@@ -855,7 +819,7 @@ Count indv cuml rcnt     nsec CPU+PIL          Caller
 1929   40%  40% 0.00     3215 cpu[0]           usec_delay+0x78
   nsec ------ Time Distribution ------ count   Stack
   4096 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@  1872    ata_wait+0x90
-  8192 |                               27      acersb_get_intr_status+0x34     
+  8192 |                               27      acersb_get_intr_status+0x34
  16384 |                               29      ata_set_feature+0x124
  32768 |                               1       ata_disk_start+0x15c
                                                ata_hba_start+0xbc
diff --git a/usr/src/man/man1m/lofiadm.1m b/usr/src/man/man1m/lofiadm.1m
index 96d6bea316..493223c3b2 100644
--- a/usr/src/man/man1m/lofiadm.1m
+++ b/usr/src/man/man1m/lofiadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH lofiadm 1M "31 Aug 2009" "SunOS 5.11" "System Administration Commands"
+.TH LOFIADM 1M "Aug 31, 2009"
 .SH NAME
 lofiadm \- administer files available as block devices through lofi
 .SH SYNOPSIS
@@ -85,7 +85,6 @@ The \fBlofi\fR driver is not available and will not work inside a zone.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIfile\fR [\fIdevice\fR]\fR
 .ad
@@ -103,7 +102,6 @@ reestablish a particular set of associations.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR {\fIgzip\fR | \fIgzip-N\fR | \fIlzma\fR}\fR
 .ad
@@ -125,7 +123,6 @@ file read/write.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIfile\fR | \fIdevice\fR\fR
 .ad
@@ -137,7 +134,6 @@ block device is not busy, and deallocates the block device.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsegment_size\fR\fR
 .ad
@@ -149,7 +145,6 @@ can be an integer multiple of 512.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-U\fR \fIfile\fR\fR
 .ad
@@ -163,7 +158,6 @@ Uncompress a compressed file.
 The following options are used when the file is encrypted:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcrypto_algorithm\fR\fR
 .ad
@@ -179,7 +173,6 @@ The passphrase is used to derive a symmetric encryption key using PKCS#5 PBKD2.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR \fIraw_key_file\fR | \fIwrapped_key_file\fR\fR
 .ad
@@ -192,7 +185,6 @@ given with the \fB-T\fR option, then the key is wrapped by that object. If
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fItoken_key\fR\fR
 .ad
@@ -207,7 +199,6 @@ must be an RSA private key.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
@@ -222,7 +213,6 @@ Generate an ephemeral symmetric encryption key.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcrypto_algorithm\fR\fR
 .ad
@@ -234,7 +224,6 @@ One of: \fBaes-128-cbc\fR, \fBaes-192-cbc\fR, \fBaes-256-cbc\fR,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdevice\fR\fR
 .ad
@@ -254,7 +243,6 @@ only opened read-only.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfile\fR\fR
 .ad
@@ -265,7 +253,6 @@ Display the block device associated with \fIfile\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIraw_key_file\fR\fR
 .ad
@@ -277,7 +264,6 @@ encryption key.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fItoken_key\fR\fR
 .ad
@@ -306,7 +292,6 @@ token object with only its key label \fBMylofiKey\fR, use:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIwrapped_key_file\fR\fR
 .ad
@@ -393,13 +378,13 @@ Check to ensure that Solaris understands the image:
 .nf
 # \fBdf -k /mnt\fR
 Filesystem            kbytes    used   avail capacity  Mounted on
-/dev/lofi/1           512418  512418       0   100%    /mnt 
+/dev/lofi/1           512418  512418       0   100%    /mnt
 # \fBls /mnt\fR
-\&./            RedHat/       doc/          ls-lR         rr_moved/ 
-\&../           TRANS.TBL     dosutils/     ls-lR.gz      sbin@ 
-\&.buildlog     bin@          etc@          misc/         tmp/ 
-COPYING       boot/         images/       mnt/          usr@ 
-README        boot.cat*     kernels/      modules/ 
+\&./            RedHat/       doc/          ls-lR         rr_moved/
+\&../           TRANS.TBL     dosutils/     ls-lR.gz      sbin@
+\&.buildlog     bin@          etc@          misc/         tmp/
+COPYING       boot/         images/       mnt/          usr@
+README        boot.cat*     kernels/      modules/
 RPM-PGP-KEY   dev@          lib@          proc/
 .fi
 .in -2
@@ -729,7 +714,6 @@ and \fBNLSPATH\fR.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -740,7 +724,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
diff --git a/usr/src/man/man1m/logadm.1m b/usr/src/man/man1m/logadm.1m
index 09da5d44c8..a69172a64f 100644
--- a/usr/src/man/man1m/logadm.1m
+++ b/usr/src/man/man1m/logadm.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH logadm 1M "23 May 2007" "SunOS 5.11" "System Administration Commands"
+.TH LOGADM 1M "May 23, 2007"
 .SH NAME
 logadm \- manage endlessly growing log files
 .SH SYNOPSIS
 .LP
 .nf
-\fBlogadm\fR 
+\fBlogadm\fR
 .fi
 
 .LP
@@ -46,7 +46,6 @@ command searches \fB/etc/logadm.conf\fR for lines of the form \fIlogname\fR
 \fIoptions\fR
 .sp
 .ne 2
-.mk
 .na
 \fB\fIlogname\fR\fR
 .ad
@@ -59,7 +58,6 @@ this field, it must be a fully qualified pathname.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIoptions\fR\fR
 .ad
@@ -121,7 +119,6 @@ default.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIpost_command\fR\fR
 .ad
@@ -140,7 +137,6 @@ executed only once after all the logs are rotated, not once per rotated log.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR \fIage\fR\fR
 .ad
@@ -155,7 +151,6 @@ Specify \fIage\fR as a number followed by an \fBh\fR (hours), \fBd\fR (days),
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR \fIpre_command\fR\fR
 .ad
@@ -174,7 +169,6 @@ executed only once before all the logs are rotated, not once per rotated log.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
@@ -186,7 +180,6 @@ length, rather than renaming the file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR \fIcount\fR\fR
 .ad
@@ -202,7 +195,6 @@ being added automatically, specify \fB\fR\fB-C\fR \fB0\fR .
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fImail_addr\fR\fR
 .ad
@@ -220,7 +212,6 @@ generated.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-E\fR \fIcmd\fR\fR
 .ad
@@ -241,7 +232,6 @@ administrators, or copying old log files to long term storage.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIconf_file\fR\fR
 .ad
@@ -255,7 +245,6 @@ files.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR \fIgroup\fR\fR
 .ad
@@ -273,7 +262,6 @@ This option requires the ability to change file group ownership using the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -284,7 +272,6 @@ Print a help message that describes \fBlogadm\fR's options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
@@ -297,7 +284,6 @@ supplied with the \fB-t\fR option).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fImode\fR\fR
 .ad
@@ -311,7 +297,6 @@ Specify \fImode\fR in any form that is accepted by the \fBchmod\fR(1) command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR \fIcmd\fR\fR
 .ad
@@ -327,7 +312,6 @@ is "\fB/bin/mv\fR \fB$file\fR\fB\fR\fB$nfile\fR".
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fI\fR\fR
 .ad
@@ -349,7 +333,6 @@ it.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-N\fR\fR
 .ad
@@ -364,7 +347,6 @@ empty replacement log file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIowner\fR\fR
 .ad
@@ -378,7 +360,6 @@ Specify \fIowner\fR in any form that is accepted by the \fBchown\fR(1) command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIperiod\fR\fR
 .ad
@@ -395,7 +376,6 @@ forces no log rotation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fItimestamp\fR\fR
 .ad
@@ -413,7 +393,6 @@ timezone.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -425,7 +404,6 @@ Remove any entries corresponding to the specified \fIlogname\fR from the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIcmd\fR\fR
 .ad
@@ -445,7 +423,6 @@ log file (that is, sorting it, removing uninteresting lines, etc.). The
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsize\fR\fR
 .ad
@@ -459,7 +436,6 @@ Specify \fIsize\fR as a number followed by the letter \fBb\fR for bytes,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR \fIsize\fR\fR
 .ad
@@ -474,7 +450,6 @@ Specify \fIsize\fR as a number followed by the letter \fBb\fR for bytes,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fItemplate\fR\fR
 .ad
@@ -487,7 +462,6 @@ contain special keywords which are expanded by \fBlogadm\fR and are in the form
 \fB$\fR\fIword\fR. Allowed sequences are:
 .sp
 .ne 2
-.mk
 .na
 \fB$\fIbasename\fR\fR
 .ad
@@ -498,7 +472,6 @@ The log file name, without the directory name
 
 .sp
 .ne 2
-.mk
 .na
 \fB$\fIdirname\fR\fR
 .ad
@@ -509,7 +482,6 @@ The directory of the file to be rotated
 
 .sp
 .ne 2
-.mk
 .na
 \fB$\fIdomain\fR\fR
 .ad
@@ -520,7 +492,6 @@ Expands to the output of \fBdomainname\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB$\fIfile\fR\fR
 .ad
@@ -531,7 +502,6 @@ The full path name of the file to be rotated
 
 .sp
 .ne 2
-.mk
 .na
 \fB$\fIisa\fR\fR
 .ad
@@ -542,7 +512,6 @@ Expands to the output of \fBuname\fR \fB-p\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB$\fImachine\fR\fR
 .ad
@@ -553,7 +522,6 @@ Expands to the output of \fBuname\fR \fB-m\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB$\fIn\fR\fR
 .ad
@@ -565,7 +533,6 @@ forth
 
 .sp
 .ne 2
-.mk
 .na
 \fB$\fIN\fR\fR
 .ad
@@ -576,7 +543,6 @@ The same as $\fIn\fR, but starts at \fB1\fR instead of zero
 
 .sp
 .ne 2
-.mk
 .na
 \fB$\fInodename\fR\fR
 .ad
@@ -587,7 +553,6 @@ Expands to the output of \fBuname\fR \fB-n\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB$\fIplatform\fR\fR
 .ad
@@ -598,7 +563,6 @@ Expands to the output of \fBuname\fR \fB-i\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB$\fIrelease\fR\fR
 .ad
@@ -609,7 +573,6 @@ Expands to the output of \fBuname\fR \fB-r\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB$\fIsecs\fR\fR
 .ad
@@ -620,7 +583,6 @@ The number of seconds since \fB00:00:00 UTC, January 1,1970\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB$\fIzonename\fR\fR
 .ad
@@ -646,7 +608,6 @@ the expire rules, if any, are applied.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fIpattern\fR\fR
 .ad
@@ -665,7 +626,6 @@ a pathname with special characters such as \fB*\fR and \fB?\fR as supported by
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -676,7 +636,6 @@ Print information about the actions being executed in verbose mode.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
@@ -694,7 +653,6 @@ is true. Otherwise the exit value is false.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR \fIentryname\fR\fR
 .ad
@@ -725,7 +683,6 @@ lines achieve the same thing, keeping two copies of rotated log files:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-z\fR \fIcount\fR\fR
 .ad
@@ -746,7 +703,6 @@ suffix of \fB\&.gz\fR.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIlogname\fR\fR
 .ad
@@ -919,7 +875,6 @@ logadm -w apache /var/apache/logs/*_log
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/logadm.conf\fR\fR
 .ad
@@ -936,13 +891,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/logins.1m b/usr/src/man/man1m/logins.1m
index c54b269b5d..187e7a76ab 100644
--- a/usr/src/man/man1m/logins.1m
+++ b/usr/src/man/man1m/logins.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH logins 1M "6 Sep 2005" "SunOS 5.11" "System Administration Commands"
+.TH LOGINS 1M "Sep 6, 2005"
 .SH NAME
 logins \- list user and system login information
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/bin/logins\fR [\fB-admopstux\fR] [\fB-g\fR \fIgroup...\fR] 
+\fB/usr/bin/logins\fR [\fB-admopstux\fR] [\fB-g\fR \fIgroup...\fR]
      [\fB-l\fR \fIlogin_name...\fR]
 .fi
 
@@ -35,12 +35,10 @@ displayed.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 20n
-.rt  
 Add two password expiration fields to the display. The fields show how many
 days a password can remain unused before it automatically becomes inactive, and
 the date that the password expires.
@@ -48,23 +46,19 @@ the date that the password expires.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 20n
-.rt  
 Selects logins with duplicate uids.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-g\fR \fIgroup\fR\fR
 .ad
 .RS 20n
-.rt  
 Selects all users belonging to \fBgroup\fR, sorted by login. Multiple groups
 can be specified as a comma-separated list. When the \fB-l\fR and \fB-g\fR
 options are combined, a user is only listed once, even if the user belongs to
@@ -73,12 +67,10 @@ more than one of the selected groups.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-l\fR \fIlogin_name...\fR\fR
 .ad
 .RS 20n
-.rt  
 Selects the requested login. Multiple logins can be specified as a
 comma-separated list. Depending on the nameservice lookup types set in
 \fB/etc/nsswitch.conf\fR, the information can come from the \fB/etc/passwd\fR
@@ -89,134 +81,110 @@ belongs to more than one of the selected groups.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
 .RS 20n
-.rt  
 Displays multiple group membership information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 20n
-.rt  
 Formats output into one line of colon-separated fields.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 20n
-.rt  
 Selects logins with no passwords.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 20n
-.rt  
 Selects all system logins.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
 .RS 20n
-.rt  
 Sorts output by login instead of by uid.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
 .RS 20n
-.rt  
 Selects all user logins.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
 .RS 20n
-.rt  
 Prints an extended set of information about each selected user. The extended
 information includes home directory, login shell and password aging
 information, each displayed on a separate line. The password information
 currently consists of password status:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNP\fR\fR
 .ad
 .RS 6n
-.rt  
 Account has no password
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLK\fR\fR
 .ad
 .RS 6n
-.rt  
 Account is locked for \fBUNIX\fR authentication
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNL\fR\fR
 .ad
 .RS 6n
-.rt  
 Account is a no login account
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPS\fR\fR
 .ad
 .RS 6n
-.rt  
 Account probably has a valid password
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBUN\fR\fR
 .ad
 .RS 6n
-.rt  
 Account password status is unknown. That is, it is not a recognizable hashed
 password or any of the above entries. See \fBcrypt\fR(3C) for valid password
 hashes.
diff --git a/usr/src/man/man1m/lpadmin.1m b/usr/src/man/man1m/lpadmin.1m
index cf4072a5e6..1601d9ef0a 100644
--- a/usr/src/man/man1m/lpadmin.1m
+++ b/usr/src/man/man1m/lpadmin.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH lpadmin 1M "24 May 2006" "SunOS 5.11" "System Administration Commands"
+.TH LPADMIN 1M "May 24, 2006"
 .SH NAME
 lpadmin \- configure the LP print service
 .SH SYNOPSIS
@@ -24,7 +24,7 @@ lpadmin \- configure the LP print service
 
 .LP
 .nf
-\fBlpadmin\fR \fB-S\fR \fIprint-wheel\fR \fB-T\fR [\fB-A\fR \fIalert-type\fR] [\fB-W\fR \fIminutes\fR] 
+\fBlpadmin\fR \fB-S\fR \fIprint-wheel\fR \fB-T\fR [\fB-A\fR \fIalert-type\fR] [\fB-W\fR \fIminutes\fR]
      [\fB-Q\fR \fIrequests\fR]
 .fi
 
@@ -105,7 +105,6 @@ characters and must consist entirely of the characters \fBA\fR-\fBZ\fR,
 The following options can appear in any order.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR \fIalert-type\fR [\fB-W\fR \fIminutes\fR]\fR
 .ad
@@ -116,35 +115,29 @@ when a printer fault is detected, and periodically thereafter, until the
 printer fault is cleared by the administrator. The \fIalert-types\fR are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmail\fR\fR
 .ad
 .RS 17n
-.rt  
 Send the alert message using mail (see \fBmail\fR(1)) to the administrator.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwrite\fR\fR
 .ad
 .RS 17n
-.rt  
 Write the message to the terminal on which the administrator is logged in. If
 the administrator is logged in on several terminals, one is chosen arbitrarily.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBquiet\fR\fR
 .ad
 .RS 17n
-.rt  
 Do not send messages for the current condition. An administrator can use this
 option to temporarily stop receiving further messages about a known problem.
 Once the fault has been cleared and printing resumes, messages are sent again
@@ -153,12 +146,10 @@ when another fault occurs with the printer.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshowfault\fR\fR
 .ad
 .RS 17n
-.rt  
 Attempt to execute a fault handler on each system that has a print job in the
 queue. The fault handler is \fB/etc/lp/alerts/printer\fR. It is invoked with
 three parameters: \fIprinter_name\fR, \fBdate\fR, \fIfile_name\fR. The
@@ -167,12 +158,10 @@ three parameters: \fIprinter_name\fR, \fBdate\fR, \fIfile_name\fR. The
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnone\fR\fR
 .ad
 .RS 17n
-.rt  
 Do not send messages; any existing alert definition for the printer is removed.
 No alert is sent when the printer faults until a different alert-type (except
 \fBquiet\fR) is used.
@@ -180,12 +169,10 @@ No alert is sent when the printer faults until a different alert-type (except
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIshell-command\fR\fR
 .ad
 .RS 17n
-.rt  
 Run the \fIshell-command\fR each time the alert needs to be sent. The shell
 command should expect the message in standard input. If there are blank spaces
 embedded in the command, enclose the command in quotes. Notice that the
@@ -199,12 +186,10 @@ used to change the user ID, then the \fIuser-name\fR for the new ID is used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist\fR\fR
 .ad
 .RS 17n
-.rt  
 Display the type of the alert for the printer fault. No change is made to the
 alert.
 .RE
@@ -245,7 +230,6 @@ is sent at intervals specified by \fIminutes\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIclass\fR\fR
 .ad
@@ -258,7 +242,6 @@ it does not already exist. This option requires the \fB-U\fR \fIdial-info\fR or
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR \fIcomment\fR\fR
 .ad
@@ -271,7 +254,6 @@ this comment.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIprinter\fR\fR
 .ad
@@ -284,7 +266,6 @@ with this option.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fBallow\fR:\fIform-list\fR\fR
 .ad
@@ -335,7 +316,6 @@ printer type before the \fB-f\fR option can be used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fIfault-recovery\fR\fR
 .ad
@@ -346,35 +326,29 @@ stopped because of a printer fault, according to the value of
 \fIfault-recovery\fR:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcontinue\fR\fR
 .ad
 .RS 13n
-.rt  
 Continue printing on the top of the page where printing stopped. This requires
 a filter to wait for the fault to clear before automatically continuing.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbeginning\fR\fR
 .ad
 .RS 13n
-.rt  
 Start printing the request again from the beginning.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwait\fR\fR
 .ad
 .RS 13n
-.rt  
 Disable printing on \fIprinter\fR and wait for the administrator or a user to
 enable printing again.
 .sp
@@ -390,7 +364,6 @@ beginning.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -403,7 +376,6 @@ of the mutually exclusive options, \fB-h\fR and \fB-l\fR, is specified,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIinterface\fR\fR
 .ad
@@ -416,7 +388,6 @@ specified with this option.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR \fIcontent-type-list\fR\fR
 .ad
@@ -432,20 +403,18 @@ printable \fBASCII\fR characters and the following control characters:
 
 .sp
 .TS
-tab();
-cw(1.83i) cw(1.83i) cw(1.83i) 
-lw(1.83i) lw(1.83i) lw(1.83i) 
-.
-Control CharOctal ValueMeaning
-BACKSPACE10Move back one char, except
- at beginning of line
-TAB11Move to next tab stop
-LINEFEED12Move to beginning of
- (newline) next line
-FORMFEED14Move to beginning of
- next page
-RETURN15Move to beginning of
- current line
+c c c
+l l l .
+Control Char	Octal Value	Meaning
+BACKSPACE	10	Move back one char, except
+		 at beginning of line
+TAB	11	Move to next tab stop
+LINEFEED	12	Move to beginning of
+ (newline)		 next line
+FORMFEED	14	Move to beginning of
+		 next page
+RETURN	15	Move to beginning of
+		 current line
 .TE
 
 To prevent the print service from considering \fBsimple\fR a valid type for the
@@ -470,7 +439,6 @@ valid content type.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
@@ -484,7 +452,6 @@ option.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fImodel\fR\fR
 .ad
@@ -497,7 +464,6 @@ option.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR \fB-f\fR \fIform-name\fR [\fB-a\fR [\fB-o\fR \fBfilebreak\fR]]
 [\fB-t\fR \fItray-number\fR]]\fR
@@ -543,7 +509,6 @@ Notice the other use of \fB-f\fR without the \fB-M\fR option above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR \fB-S\fR \fIprint-wheel\fR\fR
 .ad
@@ -570,7 +535,6 @@ described below.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fIppdfilename\fR\fR
 .ad
@@ -583,7 +547,6 @@ conjunction with the \fB-p\fR, \fB-d\fR, \fB-x\fR, or \fB-S\fR options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIoption\fR\fR
 .ad
@@ -601,7 +564,6 @@ Used with the \fB-o\fR Option", below.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIpaper-name\fR\fR
 .ad
@@ -612,7 +574,6 @@ Specify a paper type list that the printer supports.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIclass\fR\fR
 .ad
@@ -624,7 +585,6 @@ last member of \fIclass\fR, then \fIclass\fR is removed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR \fIlist\fR\fR
 .ad
@@ -658,7 +618,6 @@ printer type before the \fB-S\fR option can be used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsystem-name\fR\fR
 .ad
@@ -668,7 +627,6 @@ The \fB-s\fR option can be used for both remote or local printers. For remote
 printers:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsystem-name\fR[\fB!\fR\fIprinter-name\fR] (UUCP format)\fR
 .ad
@@ -704,7 +662,6 @@ your system:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIscheme\fR\fB://\fR\fIend-point\fR (URI format)\fR
 .ad
@@ -751,12 +708,10 @@ For example:
 For local printers:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR "\fBlocalhost\fR"\fR
 .ad
 .RS 18n
-.rt  
 Use \fBlocalhost\fR for the \fIsystem-name\fR to be used by the print service.
 In an environment where the nodename is variable, print queues are invalidated
 when the nodename changes. Using \fBlocalhost\fR as the \fIsystem-name\fR
@@ -775,7 +730,6 @@ This option should never be used when creating name service maps.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fIprinter-type-list\fR\fR
 .ad
@@ -800,7 +754,6 @@ If the \fIprinter-type-list\fR contains more than one type, then the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-t\fR\fInumber-of-trays\fR\fR
 .ad
@@ -811,7 +764,6 @@ Specify the number of trays when creating the printer.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fBallow:\fR\fIlogin-ID-list\fR\fR
 .ad
@@ -826,56 +778,46 @@ default all users are allowed on a new printer. The \fIlogin-ID-list\fR
 argument can include any or all of the following constructs:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIlogin-ID\fR\fR
 .ad
 .RS 24n
-.rt  
 a user on any system
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsystem-name\fR\fB!\fR\fIlogin-ID\fR\fR
 .ad
 .RS 24n
-.rt  
 a user on system \fIsystem-name\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsystem-name\fR\fB!all\fR\fR
 .ad
 .RS 24n
-.rt  
 all users on system \fIsystem-name\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBall!\fR\fIlogin-ID\fR\fR
 .ad
 .RS 24n
-.rt  
 a user on all systems
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBall\fR\fR
 .ad
 .RS 24n
-.rt  
 all users on all systems
 .RE
 
@@ -896,7 +838,6 @@ allow:all\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fR
 .ad
@@ -918,7 +859,6 @@ default, \fB\fR\fB-U\fR\fB direct\fR is assumed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-v\fR \fIdevice\fR\fR
 .ad
@@ -931,7 +871,6 @@ associated with more than one printer.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR \fIscheme\fR\fB://\fR\fIend-point\fR\fR
 .ad
@@ -977,7 +916,6 @@ there is no system default destination. No other \fIoptions\fR are allowed with
 .SS "Setting an Alert for a Print Wheel"
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR \fIprint-wheel\fR [\fB-A\fR \fIalert-type\fR] [\fB-W\fR
 \fIminutes\fR] [\fB-Q\fR \fIrequests\fR] \fB-T\fR\fR
@@ -993,23 +931,19 @@ print wheel, no alert is sent for the print wheel. Notice the other use of
 The \fIalert-types\fR are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmail\fR\fR
 .ad
 .RS 17n
-.rt  
 Send the alert message using the \fBmail\fR command to the administrator.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwrite\fR\fR
 .ad
 .RS 17n
-.rt  
 Write the message, using the \fBwrite\fR command, to the terminal on which the
 administrator is logged in. If the administrator is logged in on several
 terminals, one is arbitrarily chosen.
@@ -1017,12 +951,10 @@ terminals, one is arbitrarily chosen.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBquiet\fR\fR
 .ad
 .RS 17n
-.rt  
 Do not send messages for the current condition. An administrator can use this
 option to temporarily stop receiving further messages about a known problem.
 Once the \fIprint-wheel\fR has been mounted and subsequently unmounted,
@@ -1032,24 +964,20 @@ specified by the \fB-Q\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnone\fR\fR
 .ad
 .RS 17n
-.rt  
 Do not send messages until the \fB-A\fR option is given again with a different
 \fIalert-type\fR (other than \fBquiet\fR).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIshell-command\fR\fR
 .ad
 .RS 17n
-.rt  
 Run the \fIshell-command\fR each time the alert needs to be sent. The shell
 command should expect the message in standard input. If there are blanks
 embedded in the command, enclose the command in quotes. Notice that the
@@ -1063,12 +991,10 @@ used to change the user ID, then the \fIuser-name\fR for the new ID is used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist\fR\fR
 .ad
 .RS 17n
-.rt  
 Display the type of the alert for the print wheel on standard output. No change
 is made to the alert.
 .RE
@@ -1190,7 +1116,7 @@ The default for \fBstty\fR is:
 .in +2
 .nf
 stty="'9600 cs8 -cstopb -parenb ixon
-     -ixany opost -olcuc onlcr 
+     -ixany opost -olcuc onlcr
      -ocrnl -onocr
      -onlret -ofill nl0 cr0 tab0 bs0 vt0 ff0'"
 .fi
@@ -1291,7 +1217,6 @@ The \fB-o\fR option supports the use of arbitrary, user-defined options with
 the following format:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIkey\fR\fB=\fR\fIvalue\fR\fR
 .ad
@@ -1315,7 +1240,6 @@ lpadmin -p \fIprintername\fR -o \fIkey\fR=
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlpadmin\fR \fB-p\fR \fIprinter\fR \fB-o\fR \fBfoo | nofoo\fR\fR
 .ad
@@ -1372,68 +1296,56 @@ example# \fBaccept \fIprtr\fR\fR
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-zero\fR
 .ad
 .RS 12n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/spool/lp/*\fR\fR
 .ad
 .RS 26n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/lp\fR\fR
 .ad
 .RS 26n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/lp/alerts/printer\fR\fR
 .ad
 .RS 26n
-.rt  
 Fault handler for \fBlpadmin\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/printers.conf\fR\fR
 .ad
 .RS 26n
-.rt  
 System printer configuration database
 .RE
 
@@ -1445,13 +1357,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityObsolete
+Interface Stability	Obsolete
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/lpfilter.1m b/usr/src/man/man1m/lpfilter.1m
index ee91b13bc5..d4a401c5e9 100644
--- a/usr/src/man/man1m/lpfilter.1m
+++ b/usr/src/man/man1m/lpfilter.1m
@@ -4,13 +4,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH lpfilter 1M "3 Apr 1997" "SunOS 5.11" "System Administration Commands"
+.TH LPFILTER 1M "Apr 3, 1997"
 .SH NAME
 lpfilter \- administer filters used with the LP print service
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/lpfilter\fR \fB-f\fR \fIfilter-name\fR 
+\fB/usr/sbin/lpfilter\fR \fB-f\fR \fIfilter-name\fR
      {\fB-\fR | \fB-i\fR | \fB-l\fR | \fB-x\fR | \fB-F\fR \fIpathname\fR}
 .fi
 
@@ -27,12 +27,10 @@ Arguments consist of the \fB-f\fR\fIfilter-name\fR option and exactly one of
 the arguments appearing within braces (\fB{\fR\|\fB}\fR) in the SYNOPSIS.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\(mi\fR\fR
 .ad
 .RS 18n
-.rt  
 Adds or changes a filter as specified from standard input. The format of the
 input is specified below. If \fB-f\fR \fBall\fR is specified with the
 \fB\(mi\fR option, the specified change is made to all existing filters. This
@@ -41,12 +39,10 @@ is not useful.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfilter-name\fR\fR
 .ad
 .RS 18n
-.rt  
 Specifies the  \fIfilter-name\fR of the filter to be added, changed, reset,
 deleted, or listed. The  filter name \fBall\fR is a special filter name defined
 below. The  \fB-f\fR option is required.
@@ -54,12 +50,10 @@ below. The  \fB-f\fR option is required.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fIpathname\fR\fR
 .ad
 .RS 18n
-.rt  
 Adds or changes a filter as specified by the contents of the file
 \fIpathname\fR. The format of the file's contents is specified below. If
 \fB\fR\fB-f\fR\fB all\fR is specified with the \fB-F\fR option, the specified
@@ -68,12 +62,10 @@ change is made to all existing filters. This is not useful.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 18n
-.rt  
 Resets a filter to its default settings. Using  \fB\fR\fB-f\fR\fB all\fR with
 the  \fB-i\fR option restores  all filters for which predefined settings are
 available to their original settings.
@@ -81,24 +73,20 @@ available to their original settings.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 18n
-.rt  
 Lists a filter description. Using \fB-f\fR \fBall\fR with the \fB-l\fR option
 produces a list of all filters.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
 .RS 18n
-.rt  
 Deletes a filter. Using \fB-f\fR \fBall\fR with the \fB-x\fR option results in
 all filters being deleted.
 .RE
@@ -189,19 +177,17 @@ description.
 \fBPrinters: \fR\fIprinter-list\fR
 \fBFilter type: \fR\fIfilter-type\fR
 \fBCommand: \fR\fIshell-command\fR
-\fBOptions: \fR\fItemplate-list\fR 
+\fBOptions: \fR\fItemplate-list\fR
 .fi
 .in -2
 .sp
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBInput\fR \fBtypes\fR\fR
 .ad
 .RS 17n
-.rt  
 This gives the content types that can be accepted by the filter. The default is
 \fBany\fR. The document content type must  be a member of this list for the
 initial filter in the sequence.
@@ -209,12 +195,10 @@ initial filter in the sequence.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBOutput\fR \fBtypes\fR\fR
 .ad
 .RS 17n
-.rt  
 This gives the content types that the filter can  produce from any of the input
 (content) types.  The default is \fBany\fR. The intersection of the output
 types of this list and the content types acceptable to the printer (from
@@ -226,12 +210,10 @@ non-null.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPrinter\fR \fBtypes\fR\fR
 .ad
 .RS 17n
-.rt  
 This gives the printer types for which this  printer can be used. The \fBLP\fR
 print service will restrict the use of  the filter to these printer types (from
 \fBlpadmin\fR \fB-T\fR). The default is \fBany\fR.
@@ -239,12 +221,10 @@ print service will restrict the use of  the filter to these printer types (from
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPrinters\fR\fR
 .ad
 .RS 17n
-.rt  
 This gives the names of the printers for which the filter can be used. The
 \fBLP\fR print service will restrict the use of the filter to just the printers
 named. The default is \fBany\fR.
@@ -252,12 +232,10 @@ named. The default is \fBany\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFilter\fR \fBtype\fR\fR
 .ad
 .RS 17n
-.rt  
 This marks the filter as a \fBslow\fR filter or a \fBfast\fR filter. Slow
 filters are generally those that take a long time to convert their input (that
 is, minutes or hours). They are run before the job is scheduled for a  printer,
@@ -272,12 +250,10 @@ program to run while connected  to the physical printer.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCommand\fR\fR
 .ad
 .RS 17n
-.rt  
 This specifies which program to run to invoke the filter. The full program
 pathname as well as fixed options must  be included in the \fIshell-command\fR;
 additional options are constructed, based on the characteristics of each print
@@ -289,12 +265,10 @@ be constructed to convert data not handled by a single filter.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBOptions\fR\fR
 .ad
 .RS 17n
-.rt  
 This is a comma-separated list of templates used by  the  \fBLP\fR print
 service to construct options to the filter from the  characteristics of each
 print request listed in the table later. The \fB-y\fR and  \fB- P\fR arguments
@@ -489,23 +463,19 @@ for that  filter, not for the entire pipeline.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fInon-zero\fR\fR
 .ad
 .RS 12n
-.rt  
 An error occurred.
 .RE
 
diff --git a/usr/src/man/man1m/lpforms.1m b/usr/src/man/man1m/lpforms.1m
index 7fa7a8bada..bf3377968d 100644
--- a/usr/src/man/man1m/lpforms.1m
+++ b/usr/src/man/man1m/lpforms.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH lpforms 1M "3 Apr 1997" "SunOS 5.11" "System Administration Commands"
+.TH LPFORMS 1M "Apr 3, 1997"
 .SH NAME
 lpforms \- administer forms used with the LP print service
 .SH SYNOPSIS
@@ -14,7 +14,7 @@ lpforms \- administer forms used with the LP print service
 
 .LP
 .nf
-\fBlpforms\fR \fB-f\fR \fIform-name\fR \fB-A\fR \fIalert-type\fR [\fB-P\fR \fIpaper-name\fR [\fB-d\fR]] 
+\fBlpforms\fR \fB-f\fR \fIform-name\fR \fB-A\fR \fIalert-type\fR [\fB-P\fR \fIpaper-name\fR [\fB-d\fR]]
      [\fB-Q\fR \fIrequests\fR] [\fB-W\fR \fIminutes\fR]
 .fi
 
@@ -36,12 +36,10 @@ is alerted that the form \fIform-name\fR must be mounted on a printer.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIform-name\fR\fR
 .ad
 .RS 16n
-.rt  
 Specify a form.
 .RE
 
@@ -51,47 +49,39 @@ The first form of \fBlpforms\fR  requires that one of the following
 \fIoption\fRs  (\fB\(mi\fR, \fB-l\fR, \fB-F\fR, \fB-x\fR) must be used:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fIpathname\fR\fR
 .ad
 .RS 15n
-.rt  
 To add or change form \fIform-name\fR, as specified by the information in
 \fIpathname\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\(mi\fR\fR
 .ad
 .RS 15n
-.rt  
 To add or change form \fIform-name\fR, as specified by the information from
 standard input.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 15n
-.rt  
 To list the attributes of form \fIform-name\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
 .RS 15n
-.rt  
 To delete form \fIform-name\fR (this option must be used separately; it may not
 be used with any other option).
 .RE
@@ -102,47 +92,39 @@ The second form of the \fBlpforms\fR command requires the  \fB-A\fR
 \fIalert-type\fR option. The other options are optional.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR \fIalert-type\fR\fR
 .ad
 .RS 24n
-.rt  
 Defines an alert to mount the form when there are queued jobs which need it.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIpaper-name\fR [ \fB-d\fR ]\fR
 .ad
 .RS 24n
-.rt  
 Specify the paper name when creating the form. If \fB-d\fR is specified, this
 paper is the default.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Q\fR \fIrequests\fR\fR
 .ad
 .RS 24n
-.rt  
 An alert will be sent when a certain number of print requests that need the
 form are waiting.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-W\fR \fIminutes\fR\fR
 .ad
 .RS 24n
-.rt  
 An alert will be sent at intervals specified by minutes.
 .RE
 
@@ -209,7 +191,6 @@ printers only.
 A description of each form attribute is below:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPage length\fR and \fBPage Width\fR\fR
 .ad
@@ -225,7 +206,6 @@ if possible, to each filter used in a request needing this form.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNumber of pages\fR\fR
 .ad
@@ -238,7 +218,6 @@ filter the page subset of 1-\fIinteger\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLine pitch\fR and \fBCharacter pitch\fR\fR
 .ad
@@ -259,7 +238,6 @@ characters-per-inch), \fBpica\fR (10 characters-per-inch), or \fBcompressed\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCharacter set choice\fR\fR
 .ad
@@ -278,7 +256,6 @@ only.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRibbon color\fR\fR
 .ad
@@ -290,7 +267,6 @@ also mention that the color of the ribbon should be \fIribbon-color\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBComment\fR\fR
 .ad
@@ -302,7 +278,6 @@ about this form  (see \fBlpstat\fR(1)).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBAlignment pattern\fR\fR
 .ad
@@ -363,56 +338,46 @@ The \fIlogin-ID-list\fR argument may include any or all of the following
 constructs:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIlogin-ID\fR\fR
 .ad
 .RS 24n
-.rt  
 A user on any system
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsystem_name\fR\fB!\fR\fIlogin-ID\fR\fR
 .ad
 .RS 24n
-.rt  
 A user on system \fIsystem_name\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsystem_name\fR\fB!all\fR\fR
 .ad
 .RS 24n
-.rt  
 All users on system \fIsystem_name\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBall!\fR\fIlogin-ID\fR\fR
 .ad
 .RS 24n
-.rt  
 A user on all systems
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBall\fR\fR
 .ad
 .RS 24n
-.rt  
 All users on all systems
 .RE
 
@@ -447,23 +412,19 @@ The method by which the alert is sent depends on the value of  the
 \fIalert-types\fR are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmail\fR\fR
 .ad
 .RS 17n
-.rt  
 Send the alert message using the \fBmail\fR command to the administrator.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwrite\fR\fR
 .ad
 .RS 17n
-.rt  
 Write the message, using the \fBwrite\fR command, to the terminal on which the
 administrator is logged in. If the administrator is logged in on several
 terminals, one is arbitrarily chosen.
@@ -471,12 +432,10 @@ terminals, one is arbitrarily chosen.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBquiet\fR\fR
 .ad
 .RS 17n
-.rt  
 Do not send messages for the current condition. An administrator can use this
 option to temporarily stop receiving further messages about a known problem.
 Once the form \fIform-name\fR has been mounted and subsequently unmounted,
@@ -486,12 +445,10 @@ threshold specified by the \fB-Q\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshowfault\fR\fR
 .ad
 .RS 17n
-.rt  
 Attempt to execute a form alert handler on each system that has a print job for
 that form in the queue.  The fault handler is  \fB/etc/lp/alerts/form\fR. It is
 invoked with three parameters:  \fIform_name\fR, \fBdate\fR, \fIfile_name\fR.
@@ -500,24 +457,20 @@ invoked with three parameters:  \fIform_name\fR, \fBdate\fR, \fIfile_name\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnone\fR\fR
 .ad
 .RS 17n
-.rt  
 Do not send messages until the \fB-A\fR option is given again with a different
 \fIalert-type\fR (other than \fBquiet\fR).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIshell-command\fR\fR
 .ad
 .RS 17n
-.rt  
 Run the \fIshell-command\fR each time the alert needs to be sent. The shell
 command should expect the message in standard input. If there are blank spaces
 embedded in the command, enclose the command in quotes. Note that the
@@ -532,12 +485,10 @@ used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist\fR\fR
 .ad
 .RS 17n
-.rt  
 Display the type of the alert for the form on standard output. No change is
 made to the alert.
 .RE
@@ -614,48 +565,40 @@ lines is sent to the standard output, depending on the type of alert for the
 form.
 .sp
 .ne 2
-.mk
 .na
 \fB\(mi\fR
 .ad
 .RS 8n
-.rt  
 \fBWhen\fR \fIrequests\fR \fBrequests are queued:\fR \fBalert
 with\fR\fIshell-command\fR \fBevery\fR \fIminutes\fR \fBminutes\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\(mi\fR
 .ad
 .RS 8n
-.rt  
 \fBWhen\fR  \fIrequests\fR \fBrequests are queued:\fR \fBwrite to\fR
 \fIuser-name\fR \fBevery\fR \fIminutes\fR \fBminutes\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\(mi\fR
 .ad
 .RS 8n
-.rt  
 \fBWhen\fR \fIrequests\fR \fBrequests are queued:\fR \fBmail to\fR
 \fIuser-name\fR \fBevery\fR \fIminutes\fR \fBminutes\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\(mi\fR
 .ad
 .RS 8n
-.rt  
 \fBNo alert\fR
 .RE
 
@@ -689,35 +632,29 @@ when encountering files greater than or equal to 2 Gbyte ( 2^31 bytes).
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-zero\fR
 .ad
 .RS 12n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/lp/alerts/form\fR\fR
 .ad
 .RS 23n
-.rt  
 Fault handler for \fBlpform\fR.
 .RE
 
diff --git a/usr/src/man/man1m/lpget.1m b/usr/src/man/man1m/lpget.1m
index aa9aeb4500..c979812d01 100644
--- a/usr/src/man/man1m/lpget.1m
+++ b/usr/src/man/man1m/lpget.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH lpget 1M "23 May 2003" "SunOS 5.11" "System Administration Commands"
+.TH LPGET 1M "May 23, 2003"
 .SH NAME
 lpget \- get printing configuration
 .SH SYNOPSIS
@@ -33,12 +33,10 @@ configuration report for all configured destinations.
 The following option is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR \fIkey\fR\fR
 .ad
 .RS 10n
-.rt  
 Displays a configuration report for \fIkey\fR. See \fBprinters.conf\fR(4) for
 information about specifying  \fIkey\fR.
 .RE
@@ -49,12 +47,10 @@ information about specifying  \fIkey\fR.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdestination\fR\fR
 .ad
 .RS 15n
-.rt  
 Displays a configuration report for  \fIdestination\fR. Destination can be
 either a printer of a class of printers. See \fBlpadmin\fR(1M). Specify
 \fIdestination\fR using atomic or POSIX-style
@@ -65,12 +61,10 @@ information regarding the naming conventions for atomic names and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist\fR\fR
 .ad
 .RS 15n
-.rt  
 Displays a configuration report for all configured destinations.
 .RE
 
@@ -112,68 +106,56 @@ example% \fBlpget list\fR
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-zero\fR
 .ad
 .RS 12n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/printers.conf\fR\fR
 .ad
 .RS 24n
-.rt  
 System printer configuration database.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB$HOME/.printers\fR \fR
 .ad
 .RS 24n
-.rt  
 User-configurable printer database.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprinters.conf.byname\fR\fR
 .ad
 .RS 24n
-.rt  
 \fBNIS\fR version of \fB/etc/printers.conf\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprinters.org_dir\fR\fR
 .ad
 .RS 24n
-.rt  
 \fBNIS+\fR version of \fB/etc/printers.conf\fR.
 .RE
 
@@ -185,13 +167,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Stability LevelStable
+Stability Level	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/lpmove.1m b/usr/src/man/man1m/lpmove.1m
index a6f6ce708f..ee435a6fd1 100644
--- a/usr/src/man/man1m/lpmove.1m
+++ b/usr/src/man/man1m/lpmove.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH lpmove 1M "6 Jun 2006" "SunOS 5.11" "System Administration Commands"
+.TH LPMOVE 1M "Jun 6, 2006"
 .SH NAME
 lpmove \- move print requests
 .SH SYNOPSIS
@@ -51,12 +51,10 @@ destination.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIrequest-ID\fR\fR
 .ad
 .RS 15n
-.rt  
 The specific print request to be moved. Specify \fIrequest-ID\fR as the
 identifier associated with a print request as reported by \fBlpstat\fR. See
 \fBlpstat\fR(1).
@@ -64,12 +62,10 @@ identifier associated with a print request as reported by \fBlpstat\fR. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdestination\fR\fR
 .ad
 .RS 15n
-.rt  
 The name of the printer or class of printers (see \fBlpadmin\fR(1M)) to which
 \fBlpmove\fR moves a \fIspecified\fR print request. Specify \fIdestination\fR
 using atomic, URI-style (\fIscheme\fR://\fIendpoint\fR), POSIX-style
@@ -78,12 +74,10 @@ using atomic, URI-style (\fIscheme\fR://\fIendpoint\fR), POSIX-style
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsource\fR\fR
 .ad
 .RS 15n
-.rt  
 The name of the destination from which \fBlpmove\fR moves \fIall\fR print
 requests. Specify \fIdestination\fR using atomic, URI-style
 (\fIscheme\fR\fB://\fR\fIendpoint\fR), POSIX-style
@@ -100,79 +94,65 @@ atomic names and \fBstandards\fR(5) for information regarding POSIX.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-zero\fR
 .ad
 .RS 12n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/printers.conf\fR\fR
 .ad
 .RS 24n
-.rt  
 System printer configuration database
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB$HOME/.printers\fR\fR
 .ad
 .RS 24n
-.rt  
 User-configurable printer database
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBou=printers\fR\fR
 .ad
 .RS 24n
-.rt  
 LDAP version of \fB/etc/printers.conf\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprinters.conf.byname\fR\fR
 .ad
 .RS 24n
-.rt  
 \fBNIS\fR version of \fB/etc/printers.conf\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprinters.org_dir\fR\fR
 .ad
 .RS 24n
-.rt  
 \fBNIS+\fR version of \fB/etc/printers.conf\fR
 .RE
 
@@ -184,13 +164,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityObsolete
+Interface Stability	Obsolete
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/lpsched.1m b/usr/src/man/man1m/lpsched.1m
index 7b17990e0b..ad9a1c8072 100644
--- a/usr/src/man/man1m/lpsched.1m
+++ b/usr/src/man/man1m/lpsched.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH lpsched 1M "3 Sep 2004" "SunOS 5.11" "System Administration Commands"
+.TH LPSCHED 1M "Sep 3, 2004"
 .SH NAME
 lpsched \- start the LP print service
 .SH SYNOPSIS
 .LP
 .nf
-\fBlpsched\fR [\fB-f\fR \fInum_filters\fR] [\fB-n\fR \fInum_notifiers\fR] [\fB-p\fR \fIfd_limit\fR] 
+\fBlpsched\fR [\fB-f\fR \fInum_filters\fR] [\fB-n\fR \fInum_notifiers\fR] [\fB-p\fR \fIfd_limit\fR]
      [\fB-r\fR \fIreserved_fds\fR]
 .fi
 
@@ -32,12 +32,10 @@ It is recommended that you start  and stop the LP print service using
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fI num_filters\fR\fR
 .ad
 .RS 20n
-.rt  
 Specifies the number of concurrent slow filters that may be run on a print
 server. A default value of \fB1\fR is used if none is specified. Depending on
 server configuration, a value of  \fB1\fR may cause printers to remain idle
@@ -46,24 +44,20 @@ while there are jobs queued to them.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fI num_notifiers\fR\fR
 .ad
 .RS 20n
-.rt  
 Specifies the number of concurrent notification processes that can run on a
 print server. A default value of  \fB1\fR is used when none is specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fI fd_limit\fR\fR
 .ad
 .RS 20n
-.rt  
 Specifies the file descriptor resource limit for the  \fBlpsched\fR process. A
 default value of  \fB4096\fR is used if none is specified. On extremely large
 and active print servers, it may be necessary to increase this value.
@@ -71,12 +65,10 @@ and active print servers, it may be necessary to increase this value.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fI reserved_fds\fR\fR
 .ad
 .RS 20n
-.rt  
 Specifies the number of file descriptors that the scheduler reserves for
 internal communications under heavy load. A default value of  \fB2\fR is used
 when none is specified. It should not be necessary to modify this value unless
@@ -89,35 +81,29 @@ instructed to do so when troubleshooting problems under high load.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-zero\fR
 .ad
 .RS 12n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/spool/lp/*\fR\fR
 .ad
 .RS 19n
-.rt  
 \fBLP\fR print queue.
 .RE
 
diff --git a/usr/src/man/man1m/lpset.1m b/usr/src/man/man1m/lpset.1m
index a4f014e93a..b0868cbd87 100644
--- a/usr/src/man/man1m/lpset.1m
+++ b/usr/src/man/man1m/lpset.1m
@@ -3,15 +3,15 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH lpset 1M "23 May 2003" "SunOS 5.11" "System Administration Commands"
+.TH LPSET 1M "May 23, 2003"
 .SH NAME
 lpset \- set printing configuration in /etc/printers.conf or other supported
 databases
 .SH SYNOPSIS
 .LP
 .nf
-\fBlpset\fR [\fB-n\fR system | nisplus | fnsldap] [\fB-x\fR] 
-     [ [\fB-D\fR binddn] [\fB-w\fR passwd] [\fB-h\fR ldaphost]] 
+\fBlpset\fR [\fB-n\fR system | nisplus | fnsldap] [\fB-x\fR]
+     [ [\fB-D\fR binddn] [\fB-w\fR passwd] [\fB-h\fR ldaphost]]
      [\fB-a\fR \fIkey=value\fR] [\fB-d\fR \fIkey\fR] \fIdestination\fR
 .fi
 
@@ -31,12 +31,10 @@ Only a superuser or a member of Group 14 may execute \fBlpset\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fBsystem\fR|\fBnisplus\fR|\fBldap\fR\fR
 .ad
 .RS 26n
-.rt  
 Create or update the configuration information  for the \fIdestination\fR entry
 in \fB/etc/printers.conf\fR, \fBprinters.org_dir\fR (NIS+), or LDAP printer
 contexts. \fBsystem\fR specifies that the information is created or updated in
@@ -49,24 +47,20 @@ If  \fB-n\fR is not specified, \fBsystem\fR is the default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
 .RS 26n
-.rt  
 Remove all configuration for  the \fIdestination\fR entry from the database
 specified by the \fB-n\fR option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIkey\fR\fB=\fR\fIvalue\fR\fR
 .ad
 .RS 26n
-.rt  
 Configure the specified \fIkey\fR\fB=\fR\fIvalue\fR pair for the
 \fIdestination\fR. See \fBprinters.conf\fR(4) for information regarding the
 specification of \fIkey\fR\fB=\fR\fIvalue\fR pairs.
@@ -74,12 +68,10 @@ specification of \fIkey\fR\fB=\fR\fIvalue\fR pairs.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIkey\fR\fR
 .ad
 .RS 26n
-.rt  
 Delete the configuration option specified by \fIkey\fR for the
 \fIdestination\fR entry. See \fBprinters.conf\fR(4) for information regarding
 the specification of \fIkey\fR and  \fIkey\fR\fB=\fR\fIvalue\fR pairs.
@@ -87,36 +79,30 @@ the specification of \fIkey\fR and  \fIkey\fR\fB=\fR\fIvalue\fR pairs.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR \fBbinddn\fR\fR
 .ad
 .RS 26n
-.rt  
 Use the distinguished name (DN) \fBbinddn\fR to bind to the LDAP directory
 server.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR \fBpasswd\fR\fR
 .ad
 .RS 26n
-.rt  
 Use \fBpasswd\fR as the password for authentication to the LDAP directory
 server.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fBldaphost\fR\fR
 .ad
 .RS 26n
-.rt  
 Specify an alternate host on which the LDAP server is running. This option is
 only used when \fBldap\fR is specified as the naming service. If this option is
 not specified, the default is the current host system.
@@ -128,12 +114,10 @@ not specified, the default is the current host system.
 The following operand is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdestination\fR\fR
 .ad
 .RS 15n
-.rt  
 Specifies the entry in  \fB/etc/printers.conf\fR, \fBprinters.org_dir\fR, or
 LDAP, in which to create or modify information. \fIdestination\fR names a
 printer of class of printers. See  \fBlpadmin\fR(1M). Each entry in
@@ -192,46 +176,38 @@ example% \fBlpset -n ldap -h ldapl.xyz.com -D "cn=Directory Manager" \e
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-zero\fR
 .ad
 .RS 12n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/printers.conf\fR\fR
 .ad
 .RS 26n
-.rt  
 System configuration database.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprinter.org_dir\fR (NIS+)\fR
 .ad
 .RS 26n
-.rt  
 \fBNIS+\fR version of \fB/etc/printers.conf\fR.
 .RE
 
@@ -243,13 +219,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Stability LevelStable
+Stability Level	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/lpshut.1m b/usr/src/man/man1m/lpshut.1m
index 7a4c2502e0..e72d8103b3 100644
--- a/usr/src/man/man1m/lpshut.1m
+++ b/usr/src/man/man1m/lpshut.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH lpshut 1M "8 Jan 1998" "SunOS 5.11" "System Administration Commands"
+.TH LPSHUT 1M "Jan 8, 1998"
 .SH NAME
 lpshut \- stop the LP print service
 .SH SYNOPSIS
 .LP
 .nf
-\fBlpshut\fR 
+\fBlpshut\fR
 .fi
 
 .SH DESCRIPTION
@@ -26,35 +26,29 @@ restart printers using \fBlpsched\fR(1M).
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-zero\fR
 .ad
 .RS 12n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/spool/lp/*\fR\fR
 .ad
 .RS 19n
-.rt  
 \fBLP\fR print queue.
 .RE
 
diff --git a/usr/src/man/man1m/lpsystem.1m b/usr/src/man/man1m/lpsystem.1m
index da3dfec5b9..827055fd62 100644
--- a/usr/src/man/man1m/lpsystem.1m
+++ b/usr/src/man/man1m/lpsystem.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH lpsystem 1M "19 Feb 1999" "SunOS 5.11" "System Administration Commands"
+.TH LPSYSTEM 1M "Feb 19, 1999"
 .SH NAME
 lpsystem \- register remote systems with the print service
 .SH DESCRIPTION
@@ -21,13 +21,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Stability LevelObsolete*
+Stability Level	Obsolete*
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/lpusers.1m b/usr/src/man/man1m/lpusers.1m
index bc8fa22ea5..9637e3bdd5 100644
--- a/usr/src/man/man1m/lpusers.1m
+++ b/usr/src/man/man1m/lpusers.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH lpusers 1M "19 Aug 1996" "SunOS 5.11" "System Administration Commands"
+.TH LPUSERS 1M "Aug 19, 1996"
 .SH NAME
 lpusers \- set printing queue priorities
 .SH SYNOPSIS
@@ -52,56 +52,46 @@ can request when submitting a print request. The \fIlogin-ID-list\fR argument
 may include  any or all of the following constructs:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIlogin-ID\fR\fR
 .ad
 .RS 24n
-.rt  
 A user on any system
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsystem_name\fR\fB!\fR\fIlogin-ID\fR\fR
 .ad
 .RS 24n
-.rt  
 A user on the system \fIsystem_name\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsystem_name\fR\fB!all\fR\fR
 .ad
 .RS 24n
-.rt  
 All users on system \fIsystem_name\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBall!\fR\fIlogin-ID\fR\fR
 .ad
 .RS 24n
-.rt  
 A user on all systems
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBall\fR\fR
 .ad
 .RS 24n
-.rt  
 All users on all systems
 .RE
 
@@ -131,7 +121,6 @@ and the priority limits assigned to users.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fI priority-level\fR\fR
 .ad
@@ -142,7 +131,6 @@ Set the system-wide priority default to \fIpriority-level\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
@@ -153,7 +141,6 @@ List the default priority level and the priority limits assigned to users.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fI priority-level\fR\fR
 .ad
@@ -164,7 +151,6 @@ Set the default highest priority level for all users not explicitly covered.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fI priority-level\fR \fB-u\fR\fI login-ID-list\fR\fR
 .ad
@@ -176,7 +162,6 @@ Set the default highest \fIpriority-level\fR that the users in
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fI login-ID-list\fR\fR
 .ad
@@ -191,23 +176,19 @@ Remove any explicit priority level for the specified users.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-zero\fR
 .ad
 .RS 12n
-.rt  
 An error occurred.
 .RE
 
diff --git a/usr/src/man/man1m/luxadm.1m b/usr/src/man/man1m/luxadm.1m
index abcebc27ea..524527f222 100644
--- a/usr/src/man/man1m/luxadm.1m
+++ b/usr/src/man/man1m/luxadm.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH luxadm 1M "24 Sep 2003" "SunOS 5.11" "System Administration Commands"
+.TH LUXADM 1M "Sep 24, 2003"
 .SH NAME
 luxadm \- administer Sun Fire 880 storage subsystem and FC_AL devices
 .SH SYNOPSIS
 .LP
 .nf
-\fBluxadm\fR [\fIoptions\fR]... \fIsubcommand\fR [\fIoptions\fR]... \fIenclosure\fR 
+\fBluxadm\fR [\fIoptions\fR]... \fIsubcommand\fR [\fIoptions\fR]... \fIenclosure\fR
      [,\fIdev\fR] | \fIpathname\fR...
 .fi
 
@@ -177,23 +177,19 @@ logical names for disks and subsystems.
 The following options are supported by all subcommands:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
 .RS 6n
-.rt  
 Expert mode. This option is not recommended for the novice user.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 Verbose mode.
 .RE
 
@@ -207,7 +203,6 @@ subcommand in the \fBUSAGE\fR section.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIenclosure\fR\fR
 .ad
@@ -219,7 +214,6 @@ subsystem.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfibre_channel_HBA_port\fR\fR
 .ad
@@ -238,7 +232,6 @@ The path to the host controller port. A typical path is:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpathname\fR\fR
 .ad
@@ -253,7 +246,6 @@ subsystem, or disk device. \fIpathname\fR can also be the \fBWWN\fR of a
 .SS "Subcommands"
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisplay\fR \fIenclosure\fR[,\fIdev\fR]\|.\|.\|.\||
 \fIpathname\fR\|.\|.\|.\fR
@@ -282,12 +274,10 @@ for all subsystem devices, including disks.
 Disk data consists of inquiry, capacity, and configuration information.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 6n
-.rt  
 Displays performance information for the device or subsystem specified by
 \fIpathname\fR. This option only applies to subsystems that accumulate
 performance information.
@@ -295,12 +285,10 @@ performance information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 6n
-.rt  
 Displays error information for the \fBFC_AL\fR device specified by the
 pathname, or, if the path is a \fBSENA,\fR for all devices on the loop. The
 \fB-r\fR option only applies to \fBSENA\fR subsystems and individual
@@ -309,12 +297,10 @@ pathname, or, if the path is a \fBSENA,\fR for all devices on the loop. The
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 Displays in verbose mode, including mode sense data.
 .RE
 
@@ -322,7 +308,6 @@ Displays in verbose mode, including mode sense data.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdownload\fR [ \fB-s\fR ] [ \fB-f\fR \fIfilename_path\fR ]
 \fIenclosure\fR.\|.\|.\fR
@@ -344,12 +329,10 @@ image for the Sun Fire 880 internal storage subsystem is in:
 \fB/usr/platform/SUNW,Sun-Fire-880/lib/images/int_fcbpl_fw\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 6n
-.rt  
 Save. The \fB-s\fR option is used to save the downloaded firmware in the
 FEPROM. If \fB-s\fR is not specified, the downloaded firmware will not be saved
 across power cycles.
@@ -365,7 +348,6 @@ When using the \fB-s\fR option, the \fBdownload\fR subcommand modifies the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBenclosure_name\fR \fInew_name\fR \fIenclosure\fR | \fIpathname\fR\fR
 .ad
@@ -380,7 +362,6 @@ subsystem.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfailover primary\fR | \fBsecondary\fR \fIpathname\fR\fR
 .ad
@@ -395,7 +376,6 @@ logical volume is accessed through the secondary controller specified by
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfcal_s_download\fR [ \fB-f\fR \fIfcode-file\fR ]\fR
 .ad
@@ -411,12 +391,10 @@ activity through that adapter \fIwill\fR cause the adapter to reset. Newly
 updated FCode will not be executed or visible until a system reboot.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfcode-file\fR\fR
 .ad
 .RS 17n
-.rt  
 When invoked without the \fB-f\fR option, the current version of the fcode in
 each \fBFC100/S\fR Sbus card is printed.
 .RE
@@ -425,7 +403,6 @@ each \fBFC100/S\fR Sbus card is printed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfcode_download\fR \fB-p\fR\fR
 .ad
@@ -447,24 +424,20 @@ through that adapter causes the adapter to reset. Newly updated FCode will not
 be executed or visible until a system reboot.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdir-name\fR\fR
 .ad
 .RS 15n
-.rt  
 Download the FCode files contained in the directory \fIdir-name\fR to the
 appropriate adapter cards.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 15n
-.rt  
 Prints the current version of FCode loaded on each card. No download is
 performed.
 .RE
@@ -473,7 +446,6 @@ performed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinquiry\fR \fIenclosure\fR[,\fIdev\fR ]\|.\|.\|.\| |
 \fIpathname\fR\|.\|.\|.\fR
@@ -486,7 +458,6 @@ enclosure or pathname.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinsert_device\fR [ \fIenclosure\fR,\fIdev\fR\|.\|.\|. ]\fR
 .ad
@@ -509,7 +480,6 @@ creates and displays the logical pathnames for the devices.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBled\fR \fIenclosure\fR,\fIdev\fR\|.\|.\|.\|| \fIpathname\fR.\|.\|.\fR
 .ad
@@ -522,7 +492,6 @@ support this functionality.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBled_blink\fR \fIenclosure\fR,\fIdev\fR\|.\|.\|.\||
 \fIpathname\fR\|.\|.\|.\fR
@@ -536,7 +505,6 @@ subsystems that support this functionality.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBled_off\fR \fIenclosure\fR,\fIdev\fR\|.\|.\|.\||
 \fIpathname\fR\|.\|.\|.\fR
@@ -553,7 +521,6 @@ subsystems that support this functionality.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBled_on\fR \fIpathname\fR\|.\|.\|.\fR
 .ad
@@ -566,7 +533,6 @@ support this functionality.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpower_off\fR [ \fB-F\fR ] \fIenclosure\fR[,\fIdev\fR]\|.\|.\|. |
 \fIpathname\fR \|.\|.\|.\fR
@@ -581,12 +547,10 @@ spun down (stopped) and in bypass mode. This command does not apply to the Sun
 Fire 880 internal storage subsystem.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fR
 .ad
 .RS 6n
-.rt  
 The force option only applies to the \fBSENA.\fR Instructs \fBluxadm\fR to
 attempt to power off one or more devices even if those devices are being used
 by this host (and are, therefore, busy).
@@ -601,7 +565,6 @@ sure of the consequences of overriding normal checks.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpower_on\fR \fIenclosure\fR[\fB,\fR\fIdev\fR]\|.\|.\|\fR
 .ad
@@ -615,7 +578,6 @@ apply to the Sun Fire 880 internal storage subsystem.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprobe\fR [ \fB-p\fR ]\fR
 .ad
@@ -628,12 +590,10 @@ subcommand warns the user if it finds different \fBSENAs\fR with the same
 enclosure names.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 6n
-.rt  
 Includes the physical pathname in the display.
 .RE
 
@@ -641,7 +601,6 @@ Includes the physical pathname in the display.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBqlgc_s_download\fR [ \fB-f\fR \fIfcode-file\fR ]\fR
 .ad
@@ -656,12 +615,10 @@ activity through that adapter will cause the adapter to reset. Newly updated
 FCode will not be executed or visible until a system reboot.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfcode-file\fR\fR
 .ad
 .RS 17n
-.rt  
 When invoked without the \fB-f\fR option, the current version of the FCode in
 each \fBFC100/P\fR,\fB FC100/2P PCI\fR card is printed.
 .RE
@@ -670,7 +627,6 @@ each \fBFC100/P\fR,\fB FC100/2P PCI\fR card is printed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrelease\fR \fIpathname\fR\fR
 .ad
@@ -684,7 +640,6 @@ This subcommand is included for historical and diagnostic purposes only.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremove_device\fR [ \fB-F\fR ] \fIenclosure\fR[,\fIdev\fR]\|.\|.\|.\||
 \fIpathname\fR\|.\|.\|.\fR
@@ -732,12 +687,10 @@ Complete the \fBluxadm\fR \fBremove_device\fR command on the additional hosts.
 .RE
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fR
 .ad
 .RS 6n
-.rt  
 Instructs \fBluxadm\fR to attempt to hot plug one or more devices even if those
 devices are being used by this host (and are, therefore, \fBbusy\fR or
 \fBreserved\fR), to \fBforce\fR the hotplugging operation.
@@ -752,7 +705,6 @@ consequences of overriding normal hotplugging checks.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBreserve\fR \fIpathname\fR\fR
 .ad
@@ -766,7 +718,6 @@ This subcommand is included for historical and diagnostic purposes only.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBset_boot_dev\fR [ \fB-y\fR ] \fIpathname\fR\fR
 .ad
@@ -782,7 +733,6 @@ non-interactively, in which case no confirmation is requested or required.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstart\fR \fIpathname\fR\fR
 .ad
@@ -793,7 +743,6 @@ Spin up the specified disk(s) in a SENA.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstop\fR \fIpathname\fR...\fR
 .ad
@@ -815,7 +764,6 @@ If you specify a disk to an expert subcommand that operates on a bus, the
 subcommand operates on the bus to which the specified disk is attached.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fBbypass\fR \fB[\fR\fB-ab\fR\fB]\fR \fIenclosure\fR,\fIdev\fR\fR
 .ad
@@ -831,23 +779,19 @@ Circuit) to the bypassed state for the port and device specified.
 This subcommand supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 Bypass port \fBa\fR of the device specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR\fR
 .ad
 .RS 6n
-.rt  
 Bypass port \fBb\fR of the device specified.
 .RE
 
@@ -855,7 +799,6 @@ Bypass port \fBb\fR of the device specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fBdump_map\fR \fIfibre_channel_HBA_port\fR\fR
 .ad
@@ -868,7 +811,6 @@ returned.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fBenable\fR \fB[\fR\fB-ab\fR\fB]\fR \fIenclosure\fR,\fIdev\fR\fR
 .ad
@@ -884,23 +826,19 @@ Circuit) to the enabled state for the port and device specified.
 This subcommand supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 Enable port \fBa\fR of the device specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR\fR
 .ad
 .RS 6n
-.rt  
 Enable port \fBb\fR of the device specified.
 .RE
 
@@ -908,7 +846,6 @@ Enable port \fBb\fR of the device specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-e\fR \fBforcelip\fR \fIenclosure\fR[\fB,\fR\fIdev\fR] \|.\|.\|. |
 \fIpathname\fR\|.\|.\|.\fR
@@ -926,7 +863,6 @@ all ports on the loop.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-e\fR \fBrdls\fR \fIenclosure\fR[\fB,\fR\fIdev\fR] \|.\|.\|. |
 \fIpathname\fR\|.\|.\|.\fR
@@ -947,100 +883,82 @@ by users that are knowledgeable about the systems they are managing.
 These commands do not apply to the Sun Fire 880 internal storage subsystem.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-e\fR \fBbus_getstate\fR \fIpathname\fR\fR
 .ad
 .RS 29n
-.rt  
 Get and display the state of the specified bus.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-e\fR \fBbus_quiesce\fR \fIpathname\fR\fR
 .ad
 .RS 29n
-.rt  
 Quiesce the specified bus.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-e\fR \fBbus_reset\fR \fIpathname\fR\fR
 .ad
 .RS 29n
-.rt  
 Reset the specified bus only.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-e\fR \fBbus_resetall\fR \fIpathname\fR\fR
 .ad
 .RS 29n
-.rt  
 Reset the specified bus and all devices.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-e\fR \fBbus_unquiesce\fR \fIpathname\fR\fR
 .ad
 .RS 29n
-.rt  
 Unquiesce the specified bus. the specified device.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-e\fR \fBdev_getstate\fR \fIpathname\fR\fR
 .ad
 .RS 29n
-.rt  
 Get and display the state of the specified device.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-e\fR \fBdev_reset\fR \fIpathname\fR\fR
 .ad
 .RS 29n
-.rt  
 Reset the specified device.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-e\fR \fBoffline\fR \fIpathname\fR\fR
 .ad
 .RS 29n
-.rt  
 Take the specified device offline.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-e\fR \fBonline\fR \fIpathname\fR\fR
 .ad
 .RS 29n
-.rt  
 Put the specified device online.
 .RE
 
@@ -1118,7 +1036,7 @@ case, use \fIs\fR to specify the slot:
 .sp
 .in +2
 .nf
-example% \fBluxadm display BOB,s0\fR 
+example% \fBluxadm display BOB,s0\fR
 .fi
 .in -2
 .sp
@@ -1307,30 +1225,25 @@ that affects the execution of \fBluxadm\fR.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 9n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\(mi1\fR\fR
 .ad
 .RS 9n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fBusr/lib/firmware/fc_s/fc_s_fcode\fR\fR
 .ad
@@ -1341,7 +1254,6 @@ An error occurred.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBusr/lib/locale/C/LC_MESSAGES/ibfirmware\fR\fR
 .ad
diff --git a/usr/src/man/man1m/mail.local.1m b/usr/src/man/man1m/mail.local.1m
index 2e43dc569c..8245213326 100644
--- a/usr/src/man/man1m/mail.local.1m
+++ b/usr/src/man/man1m/mail.local.1m
@@ -10,20 +10,20 @@
 .\" Copyright (c) 1998-2006, 2008 Sendmail, Inc. and its suppliers.  All rights reserved.
 .\" The following license terms and conditions apply, unless a different license is obtained from Sendmail, Inc., 6425 Christie Ave, Fourth Floor, Emeryville, CA 94608, USA, or by electronic mail at license@sendmail.com.  License Terms:  Use, Modification and Redistribution
 .\" (including distribution of any modified or derived work) in source and binary forms is permitted only if each of the following conditions is met:  1. Redistributions qualify as "freeware" or "Open Source Software" under    one of the following terms:     (a) Redistributions are made at no charge
-.\" beyond the reasonable cost of        materials and delivery.     (b) Redistributions are accompanied by a copy of the Source Code or by an        irrevocable offer to provide a copy of the Source Code for up to three       years at the cost of materials and delivery.  Such redistributions    
+.\" beyond the reasonable cost of        materials and delivery.     (b) Redistributions are accompanied by a copy of the Source Code or by an        irrevocable offer to provide a copy of the Source Code for up to three       years at the cost of materials and delivery.  Such redistributions
 .\"    must allow further use, modification, and redistribution of the Source       Code under substantially the same terms as this license.  For the        purposes of redistribution "Source Code" means the complete compilable       and linkable source code of sendmail including all modifications.
 .\"  2. Redistributions of source code must retain the copyright notices as they    appear in each source code file, these license terms, and the    disclaimer/limitation of liability set forth as paragraph 6 below.  3. Redistributions in binary form must reproduce the Copyright Notice,    these license
 .\" terms, and the disclaimer/limitation of liability set    forth as paragraph 6 below, in the documentation and/or other materials    provided with the distribution.  For the purposes of binary distribution    the "Copyright Notice" refers to the following language:    "Copyright (c) 1998-2004 Sendmail,
 .\" Inc.  All rights reserved."  4. Neither the name of Sendmail, Inc. nor the University of California nor    the names of their contributors may be used to endorse or promote    products derived from this software without specific prior written    permission.  The name "sendmail" is a trademark
 .\" of Sendmail, Inc.  5. All redistributions must comply with the conditions imposed by the    University of California on certain embedded code, whose copyright    notice and conditions for redistribution are as follows:     (a) Copyright (c) 1988, 1993 The Regents of the University of        California.
 .\"  All rights reserved.     (b) Redistribution and use in source and binary forms, with or without        modification, are permitted provided that the following conditions        are met:        (i)   Redistributions of source code must retain the above copyright             notice, this list of
-.\" conditions and the following disclaimer.        (ii)  Redistributions in binary form must reproduce the above             copyright notice, this list of conditions and the following             disclaimer in the documentation and/or other materials provided             with the distribution. 
+.\" conditions and the following disclaimer.        (ii)  Redistributions in binary form must reproduce the above             copyright notice, this list of conditions and the following             disclaimer in the documentation and/or other materials provided             with the distribution.
 .\"       (iii) Neither the name of the University nor the names of its             contributors may be used to endorse or promote products derived             from this software without specific prior written permission. 6. Disclaimer/Limitation of Liability: THIS SOFTWARE IS PROVIDED BY    SENDMAIL,
 .\" INC. AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED    WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF    MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN    NO EVENT SHALL SENDMAIL, INC., THE REGENTS OF THE UNIVERSITY OF    CALIFORNIA OR CONTRIBUTORS
 .\" BE LIABLE FOR ANY DIRECT, INDIRECT,    INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT    NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF    USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON    ANY THEORY OF LIABILITY, WHETHER
 .\" IN CONTRACT, STRICT LIABILITY, OR TORT    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF    THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
 .\" Portions Copyright (c) 2009, Sun Microsystems, Inc.  All Rights Reserved.
-.TH mail.local 1M "11 Apr 1997" "SunOS 5.11" "System Administration Commands"
+.TH MAIL.LOCAL 1M "Apr 11, 1997"
 .SH NAME
 mail.local \- store mail in a mailbox
 .SH SYNOPSIS
@@ -73,24 +73,20 @@ which will be used by the mailbox reader to mark the message boundary.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIsender\fR\fR
 .ad
 .RS 13n
-.rt  
 Specifies the "envelope from address" of the message. This flag is technically
 optional,  but should be used.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 13n
-.rt  
 Specifies the recipient of the message. This flag is also optional and is
 supported here for backward compatibility. That is, \fBmail.local\fR\fI
 recipient\fR is the same as \fBmail.local\fR \fB-d\fR \fIrecipient\fR.
@@ -98,45 +94,37 @@ recipient\fR is the same as \fBmail.local\fR \fB-d\fR \fIrecipient\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 13n
-.rt  
 Turn on \fBLMTP\fR mode.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIfrom\fR\fR
 .ad
 .RS 13n
-.rt  
 Specify the sender's name (for backward compatibility).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-7\fR\fR
 .ad
 .RS 13n
-.rt  
 Do not advertise 8BITMIME support in \fBLMTP\fR mode.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR\fR
 .ad
 .RS 13n
-.rt  
 Return a permanent error instead of a temporary error if a mailbox exceeds
 quota.
 .RE
@@ -147,24 +135,20 @@ quota.
 The following operand is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIrecipient\fR\fR
 .ad
 .RS 13n
-.rt  
 The recipient of the mail message.
 .RE
 
 .SH ENVIRONMENT VARIABLES
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTZ\fR\fR
 .ad
 .RS 6n
-.rt  
 Used to set the appropriate time zone on the timestamp.
 .RE
 
@@ -174,57 +158,47 @@ Used to set the appropriate time zone on the timestamp.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful operation.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/tmp/local.\fR\fIXXXXXX\fR\fR
 .ad
 .RS 23n
-.rt  
 temporary files
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/tmp/lochd.\fR\fIXXXXXX\fR\fR
 .ad
 .RS 23n
-.rt  
 temporary files
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/mail/\fR\fIuser_name\fR\fR
 .ad
 .RS 23n
-.rt  
 user's mail file
 .RE
 
diff --git a/usr/src/man/man1m/makedbm.1m b/usr/src/man/man1m/makedbm.1m
index 6eeaaaaad7..07d0b4b90d 100644
--- a/usr/src/man/man1m/makedbm.1m
+++ b/usr/src/man/man1m/makedbm.1m
@@ -3,15 +3,15 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH makedbm 1M "17 Aug 1999" "SunOS 5.11" "System Administration Commands"
+.TH MAKEDBM 1M "Aug 17, 1999"
 .SH NAME
 makedbm \- make a dbm file, or get a text file from a dbm file
 .SH SYNOPSIS
 .LP
 .nf
-\fBmakedbm\fR [\fB-b\fR] [\fB-l\fR] [\fB-s\fR] [\fB-E\fR] [\fB-i\fR \fIyp_input_file\fR] 
-     [\fB-o\fR \fIyp_output_name\fR] [\fB-d\fR \fIyp_domain_name\fR] 
-     [\fB-m\fR \fIyp_master_name\fR] [\fB-S\fR \fIdelimiter\fR] 
+\fBmakedbm\fR [\fB-b\fR] [\fB-l\fR] [\fB-s\fR] [\fB-E\fR] [\fB-i\fR \fIyp_input_file\fR]
+     [\fB-o\fR \fIyp_output_name\fR] [\fB-d\fR \fIyp_domain_name\fR]
+     [\fB-m\fR \fIyp_master_name\fR] [\fB-S\fR \fIdelimiter\fR]
      [\fB-D\fR \fInumber_of_delimiters\fR] \fIinfile\fR \fIoutfile\fR
 .fi
 
@@ -44,12 +44,10 @@ if \fIinfile\fR is `\(mi').  The entries that have keys with the prefix
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR\fR
 .ad
 .RS 27n
-.rt  
 Insert the  \fBYP_INTERDOMAIN\fR into the output.  This key causes
 \fBypserv\fR(1M) to use  \fBDNS\fR for host name and address lookups for hosts
 not found in the maps.
@@ -57,56 +55,46 @@ not found in the maps.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fI yp_domain_name\fR\fR
 .ad
 .RS 27n
-.rt  
 Create a special entry with the key \fIyp_domain_name\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR \fInumber_of delimiters\fR\fR
 .ad
 .RS 27n
-.rt  
 Specify \fInumber_of_delimiters\fR to skip before forming the key.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-E\fR\fR
 .ad
 .RS 27n
-.rt  
 Delimiters are escaped.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fI yp_input_file\fR\fR
 .ad
 .RS 27n
-.rt  
 Create a special entry with the key \fIyp_input_file\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 27n
-.rt  
 Lower case. Convert the keys of the given map to lower case, so that, for
 example, host name matches succeed independent of upper or lower case
 distinctions.
@@ -114,58 +102,48 @@ distinctions.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fI yp_master_name\fR\fR
 .ad
 .RS 27n
-.rt  
 Create a special entry with the key \fIyp_master_name\fR. If no master host
 name is specified, \fIyp_master_name\fR is set to the local host name.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fI yp_output_name\fR\fR
 .ad
 .RS 27n
-.rt  
 Create a special entry with the key \fIyp_output_name\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 27n
-.rt  
 Secure map. Accept connections from secure  \fBNIS\fR networks only.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR \fIdelimiter\fR\fR
 .ad
 .RS 27n
-.rt  
 Specify the \fIdelimiter\fR to use instead of the default delimiter for forming
 the key.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fI dbmfilename\fR\fR
 .ad
 .RS 27n
-.rt  
 Undo a \fBdbm\fR file.  Prints out the file in text format, one entry per line,
 with a single space separating keys from values.
 .RE
@@ -176,24 +154,20 @@ with a single space separating keys from values.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIinfile\fR\fR
 .ad
 .RS 11n
-.rt  
 Input file for \fBmakedbm\fR. If \fIinfile\fR is `\fB\(mi\fR\&' (dash), the
 standard input is read.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIoutfile\fR\fR
 .ad
 .RS 11n
-.rt  
 One of two output files in \fBndbm\fR format: \fIoutfile\fR\fB\&.pag\fR and
 \fIoutfile\fR\fB\&.dir.\fR
 .RE
diff --git a/usr/src/man/man1m/makemap.1m b/usr/src/man/man1m/makemap.1m
index 139a03c1ac..ae93968fdd 100644
--- a/usr/src/man/man1m/makemap.1m
+++ b/usr/src/man/man1m/makemap.1m
@@ -10,27 +10,27 @@
 .\" Copyright (c) 1998-2006, 2008 Sendmail, Inc. and its suppliers.  All rights reserved.
 .\" The following license terms and conditions apply, unless a different license is obtained from Sendmail, Inc., 6425 Christie Ave, Fourth Floor, Emeryville, CA 94608, USA, or by electronic mail at license@sendmail.com.  License Terms:  Use, Modification and Redistribution
 .\" (including distribution of any modified or derived work) in source and binary forms is permitted only if each of the following conditions is met:  1. Redistributions qualify as "freeware" or "Open Source Software" under    one of the following terms:     (a) Redistributions are made at no charge
-.\" beyond the reasonable cost of        materials and delivery.     (b) Redistributions are accompanied by a copy of the Source Code or by an        irrevocable offer to provide a copy of the Source Code for up to three       years at the cost of materials and delivery.  Such redistributions    
+.\" beyond the reasonable cost of        materials and delivery.     (b) Redistributions are accompanied by a copy of the Source Code or by an        irrevocable offer to provide a copy of the Source Code for up to three       years at the cost of materials and delivery.  Such redistributions
 .\"    must allow further use, modification, and redistribution of the Source       Code under substantially the same terms as this license.  For the        purposes of redistribution "Source Code" means the complete compilable       and linkable source code of sendmail including all modifications.
 .\"  2. Redistributions of source code must retain the copyright notices as they    appear in each source code file, these license terms, and the    disclaimer/limitation of liability set forth as paragraph 6 below.  3. Redistributions in binary form must reproduce the Copyright Notice,    these license
 .\" terms, and the disclaimer/limitation of liability set    forth as paragraph 6 below, in the documentation and/or other materials    provided with the distribution.  For the purposes of binary distribution    the "Copyright Notice" refers to the following language:    "Copyright (c) 1998-2004 Sendmail,
 .\" Inc.  All rights reserved."  4. Neither the name of Sendmail, Inc. nor the University of California nor    the names of their contributors may be used to endorse or promote    products derived from this software without specific prior written    permission.  The name "sendmail" is a trademark
 .\" of Sendmail, Inc.  5. All redistributions must comply with the conditions imposed by the    University of California on certain embedded code, whose copyright    notice and conditions for redistribution are as follows:     (a) Copyright (c) 1988, 1993 The Regents of the University of        California.
 .\"  All rights reserved.     (b) Redistribution and use in source and binary forms, with or without        modification, are permitted provided that the following conditions        are met:        (i)   Redistributions of source code must retain the above copyright             notice, this list of
-.\" conditions and the following disclaimer.        (ii)  Redistributions in binary form must reproduce the above             copyright notice, this list of conditions and the following             disclaimer in the documentation and/or other materials provided             with the distribution. 
+.\" conditions and the following disclaimer.        (ii)  Redistributions in binary form must reproduce the above             copyright notice, this list of conditions and the following             disclaimer in the documentation and/or other materials provided             with the distribution.
 .\"       (iii) Neither the name of the University nor the names of its             contributors may be used to endorse or promote products derived             from this software without specific prior written permission. 6. Disclaimer/Limitation of Liability: THIS SOFTWARE IS PROVIDED BY    SENDMAIL,
 .\" INC. AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED    WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF    MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN    NO EVENT SHALL SENDMAIL, INC., THE REGENTS OF THE UNIVERSITY OF    CALIFORNIA OR CONTRIBUTORS
 .\" BE LIABLE FOR ANY DIRECT, INDIRECT,    INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT    NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF    USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON    ANY THEORY OF LIABILITY, WHETHER
 .\" IN CONTRACT, STRICT LIABILITY, OR TORT    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF    THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
 .\"  Copyright (c) 2009, Sun Microsystems, Inc.  All Rights Reserved.
-.TH makemap 1M "22 Apr 2008" "SunOS 5.11" "System Administration Commands"
+.TH MAKEMAP 1M "Apr 22, 2008"
 .SH NAME
 makemap \- create database maps for sendmail
 .SH SYNOPSIS
 .LP
 .nf
-\fBmakemap\fR [\fB-N\fR] [\fB-d\fR] [\fB-f\fR] [\fB-o\fR] [\fB-r\fR] [\fB-s\fR] [\fB-v\fR] [\fB-C\fR \fIfile\fR] 
-     [\fB-c\fR \fIcachesize\fR] [\fB-D\fR \fIcommentchar\fR] [\fB-e\fR] [\fB-l\fR] [\fB-t\fR \fIdelim\fR] 
+\fBmakemap\fR [\fB-N\fR] [\fB-d\fR] [\fB-f\fR] [\fB-o\fR] [\fB-r\fR] [\fB-s\fR] [\fB-v\fR] [\fB-C\fR \fIfile\fR]
+     [\fB-c\fR \fIcachesize\fR] [\fB-D\fR \fIcommentchar\fR] [\fB-e\fR] [\fB-l\fR] [\fB-t\fR \fIdelim\fR]
      [\fB-u\fR] \fImantype\fR \fImapname\fR
 .fi
 
@@ -57,70 +57,58 @@ selected using the \fImaptype\fR parameter. See \fBOPERANDS\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcachesize\fR\fR
 .ad
 .RS 18n
-.rt  
 Use the specified hash and B-Tree cache size (\fIcachesize\fR).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR \fIfile\fR\fR
 .ad
 .RS 18n
-.rt  
 Use the specified sendmail configuration file (\fIfile\fR) for looking up the
 TrustedUser option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 18n
-.rt  
 Allow duplicate keys in the map. This is only allowed on B-Tree format maps. If
 two identical keys are read, both be inserted into the map.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR \fIcommentchar\fR\fR
 .ad
 .RS 18n
-.rt  
 Use the specified character to indicate a comment (which is ignored) instead of
 the default of '\fB#\fR'.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
 .RS 18n
-.rt  
 Allow empty value (right hand side).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 18n
-.rt  
 Normally, all upper case letters in the key are folded to lower case. This flag
 disables that behavior. This is intended to mesh with the \fB-f\fR flag in the
 \fBK\fR line in \fBsendmail.cf\fR. The value is never case folded.
@@ -128,81 +116,67 @@ disables that behavior. This is intended to mesh with the \fB-f\fR flag in the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 18n
-.rt  
 List supported map types.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-N\fR\fR
 .ad
 .RS 18n
-.rt  
 Include the null byte that terminates strings in the map. This must match the
 \fB-N\fR flag in the \fBK\fR line in \fBsendmail.cf\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 18n
-.rt  
 Append to an old file. This allows you to augment an existing file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 18n
-.rt  
 Allow replacement of existing keys. Normally \fBmakemap\fR complains if you
 repeat a key, and does not do the insert.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 18n
-.rt  
 Ignore safety checks on maps being created. This includes checking for hard or
 symbolic links in world writable directories.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fIdelim\fR\fR
 .ad
 .RS 18n
-.rt  
 Use the specified delimiter (\fIdelim\fR) instead of whitespace.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
 .RS 18n
-.rt  
 Dump (unmap) the content of the database to standard output. Note that, if the
 \fB-t\fR option is also provided, the specified delimiter is used when the
 content is dumped instead of whitespace.
@@ -210,12 +184,10 @@ content is dumped instead of whitespace.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 18n
-.rt  
 Verbosely print what it is doing.
 .RE
 
@@ -225,55 +197,45 @@ Verbosely print what it is doing.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fImapname\fR\fR
 .ad
 .RS 11n
-.rt  
 File name of the database map being created.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fImaptype\fR\fR
 .ad
 .RS 11n
-.rt  
 Specifies the database format. The following \fImaptype\fR parameters are
 available:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdbm\fR\fR
 .ad
 .RS 9n
-.rt  
 Specifies \fBDBM\fR format maps.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbtree\fR\fR
 .ad
 .RS 9n
-.rt  
 Specifies B-Tree format maps.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhash\fR\fR
 .ad
 .RS 9n
-.rt  
 Specifies hash format maps.
 .RE
 
diff --git a/usr/src/man/man1m/mdmonitord.1m b/usr/src/man/man1m/mdmonitord.1m
index 5ecda27e6c..7367804b05 100644
--- a/usr/src/man/man1m/mdmonitord.1m
+++ b/usr/src/man/man1m/mdmonitord.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mdmonitord 1M "25 Jul 2004" "SunOS 5.11" "System Administration Commands"
+.TH MDMONITORD 1M "Jul 25, 2004"
 .SH NAME
 mdmonitord \- daemon to monitor metadevices
 .SH SYNOPSIS
@@ -39,12 +39,10 @@ error event which triggers a check of these metadevices.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
 .RS 6n
-.rt  
 Time interval in seconds.  The default value is 0, which causes probes to occur
 only upon an error. If you want to run \fBmdmonitord\fR at a regular interval,
 a value of 1800 (seconds, every half hour) is recommended as a starting point.
@@ -56,23 +54,19 @@ a value of 1800 (seconds, every half hour) is recommended as a starting point.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>0\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
diff --git a/usr/src/man/man1m/medstat.1m b/usr/src/man/man1m/medstat.1m
index 25b06daf96..07c9c55999 100644
--- a/usr/src/man/man1m/medstat.1m
+++ b/usr/src/man/man1m/medstat.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH medstat 1M "18 Jan 2001" "SunOS 5.11" "System Administration Commands"
+.TH MEDSTAT 1M "Jan 18, 2001"
 .SH NAME
 medstat \- check the status of mediator hosts for a given diskset
 .SH SYNOPSIS
@@ -21,12 +21,10 @@ results of the communication.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR \fR
 .ad
 .RS 15n
-.rt  
 This optional argument disables the printing of informative text. When used
 with \fB-q\fR, \fBmedstat\fR still prints error messages and returns a result
 code.
@@ -34,12 +32,10 @@ code.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fB\fIsetname\fR\fR \fR
 .ad
 .RS 15n
-.rt  
 Specifies the name of a diskset on which \fBmedstat\fR will work.
 .RE
 
@@ -73,12 +69,10 @@ indicates any other error condition, and Ok indicates no error conditions.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/lvm/meddb\fR\fR
 .ad
 .RS 18n
-.rt  
 Contains the mediator data for a host that has been selected as a mediator
 host.
 .RE
@@ -89,23 +83,19 @@ host.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>0\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -117,12 +107,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-lw(2.75i) lw(2.75i) 
-lw(2.75i) lw(2.75i) 
-.
-\fBATTRIBUTE TYPE\fR\fBATTRIBUTE VALUE\fR
-Interface StabilityEvolving
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
+_
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/metaclear.1m b/usr/src/man/man1m/metaclear.1m
index f2d8ef6009..2ba234f235 100644
--- a/usr/src/man/man1m/metaclear.1m
+++ b/usr/src/man/man1m/metaclear.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH metaclear 1M "26 Mar 2006" "SunOS 5.11" "System Administration Commands"
+.TH METACLEAR 1M "Mar 26, 2006"
 .SH NAME
 metaclear \- delete active metadevices and hot spare pools
 .SH SYNOPSIS
@@ -58,70 +58,58 @@ Any metadevice currently in use (open) cannot be deleted.
 Root privileges are required for all of the following options except \fB-h\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 14n
-.rt  
 Deletes all metadevices and configured hot spare pools in the set named by
 \fB-s\fR, or the local set by default.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 14n
-.rt  
 Deletes (forcibly) a metadevice that contains a subcomponent in an error state.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 14n
-.rt  
 Displays usage message.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 14n
-.rt  
 Deletes (purges) all soft partitions from the specified metadevice or
 component.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 14n
-.rt  
 Recursively deletes specified metadevices and hot spare pools, but does not
 delete metadevices on which others depend.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fB\fIsetname\fR\fR\fR
 .ad
 .RS 14n
-.rt  
 Specifies the name of the diskset on which \fBmetaclear\fR will work. Using the
 \fB-s\fR option causes the command to perform its administrative function
 within the specified diskset. Without this option, the command performs its
@@ -131,35 +119,29 @@ function on local metadevices and/or hot spare pools.
 .SH OPERANDS
 .sp
 .ne 2
-.mk
 .na
 \fB\fImetadevice\fR \fI\&...\fR\fR
 .ad
 .RS 24n
-.rt  
 Specifies the name(s) of the metadevice(s) to be deleted.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcomponent\fR\fR
 .ad
 .RS 24n
-.rt  
 Specifies the \fBc*d*t*s*\fR name(s) of the components containing soft
 partitions to be deleted.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIhot_spare_pool\fR \fI\&...\fR\fR
 .ad
 .RS 24n
-.rt  
 Specifies the name(s) of the hot spare pools to be deleted. Names for hot spare
 pools can be any legal file name that is composed of alphanumeric characters, a
 dash ("-"), an underscore ("_"), or a period ("."). Names must begin with a
@@ -265,23 +247,19 @@ d5: Soft Partition is cleared
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -293,13 +271,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/metadb.1m b/usr/src/man/man1m/metadb.1m
index 02aa68af81..c5f96e517f 100644
--- a/usr/src/man/man1m/metadb.1m
+++ b/usr/src/man/man1m/metadb.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH metadb 1M "26 Mar 2006" "SunOS 5.11" "System Administration Commands"
+.TH METADB 1M "Mar 26, 2006"
 .SH NAME
 metadb \- create and delete replicas of the metadevice state database
 .SH SYNOPSIS
@@ -24,7 +24,7 @@ metadb \- create and delete replicas of the metadevice state database
 
 .LP
 .nf
-\fB/sbin/metadb\fR [\fB-s\fR \fIsetname\fR] \fB-a\fR [\fB-f\fR] [\fB-k\fR \fIsystem-file\fR] 
+\fB/sbin/metadb\fR [\fB-s\fR \fIsetname\fR] \fB-a\fR [\fB-f\fR] [\fB-k\fR \fIsystem-file\fR]
      [\fB-c\fR \fInumber\fR] [\fB-l\fR \fIlength\fR] \fIslice...\fR
 .fi
 
@@ -45,7 +45,7 @@ metadb \- create and delete replicas of the metadevice state database
 
 .LP
 .nf
-\fB/sbin/metadb\fR [\fB-s\fR \fIsetname\fR] \fB-p\fR [\fB-k\fR \fIsystem-file\fR] 
+\fB/sbin/metadb\fR [\fB-s\fR \fIsetname\fR] \fB-p\fR [\fB-k\fR \fIsystem-file\fR]
      [\fImddb.cf-file\fR]
 .fi
 
@@ -156,12 +156,10 @@ options are compatible on the same command line. Refer to the \fBSYNOPSIS\fR to
 see the supported use of the options.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 18n
-.rt  
 Attach a new database device. The \fB/kernel/drv/md.conf\fR file is
 automatically updated with the new information and the \fB/etc/lvm/mddb.cf\fR
 file is updated as well. An alternate way to create replicas is by defining
@@ -173,24 +171,20 @@ for instructions on setting up replicas in that file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fInumber\fR\fR
 .ad
 .RS 18n
-.rt  
 Specifies the number of replicas to be placed on each device. The default
 number of replicas is 1.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 18n
-.rt  
 Deletes all replicas that are located on the specified \fIslice\fR. The
 \fB/kernel/drv/md.conf\fR file is automatically updated with the new
 information and the \fB/etc/lvm/mddb.cf\fR file is updated as well.
@@ -198,12 +192,10 @@ information and the \fB/etc/lvm/mddb.cf\fR file is updated as well.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 18n
-.rt  
 The \fB-f\fR option is used to create the initial state database. It is also
 used to force the deletion of replicas below the minimum of one. (The \fB-a\fR
 and \fB-f\fR options should be used together only when no state databases
@@ -212,211 +204,173 @@ exist.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 18n
-.rt  
 Displays a usage message.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 18n
-.rt  
 Inquire about the status of the replicas. The output of the \fB-i\fR option
 includes characters in front of the device name that represent the status of
 the state database. Explanations of the characters are displayed following the
 replica status and are as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBd\fR\fR
 .ad
 .RS 5n
-.rt  
 replica does not have an associated device ID.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBo\fR\fR
 .ad
 .RS 5n
-.rt  
 replica active prior to last \fBmddb\fR configuration change
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBu\fR\fR
 .ad
 .RS 5n
-.rt  
 replica is up to date
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBl\fR\fR
 .ad
 .RS 5n
-.rt  
 locator for this replica was read successfully
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBc\fR\fR
 .ad
 .RS 5n
-.rt  
 replica's location was in \fB/etc/lvm/mddb.cf\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBp\fR\fR
 .ad
 .RS 5n
-.rt  
 replica's location was patched in kernel
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBm\fR\fR
 .ad
 .RS 5n
-.rt  
 replica is master, this is replica selected as input
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBr\fR\fR
 .ad
 .RS 5n
-.rt  
 replica does not have device relocation information
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBt\fR\fR
 .ad
 .RS 5n
-.rt  
 tagged data is associated with the replica
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBW\fR\fR
 .ad
 .RS 5n
-.rt  
 replica has device write errors
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBa\fR\fR
 .ad
 .RS 5n
-.rt  
 replica is active, commits are occurring to this
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBM\fR\fR
 .ad
 .RS 5n
-.rt  
 replica had problem with master blocks
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBD\fR\fR
 .ad
 .RS 5n
-.rt  
 replica had problem with data blocks
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBF\fR\fR
 .ad
 .RS 5n
-.rt  
 replica had format problems
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBS\fR\fR
 .ad
 .RS 5n
-.rt  
 replica is too small to hold current database
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBR\fR\fR
 .ad
 .RS 5n
-.rt  
 replica had device read errors
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBB\fR\fR
 .ad
 .RS 5n
-.rt  
 tagged data associated with the replica is not valid
 .RE
 
@@ -424,12 +378,10 @@ tagged data associated with the replica is not valid
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR \fIsystem-file\fR\fR
 .ad
 .RS 18n
-.rt  
 Specifies the name of the kernel file where the replica information should be
 written. The default \fIsystem-file\fR is \fB/kernel/drv/md.conf\fR. This
 option is for use with the local diskset only.
@@ -437,12 +389,10 @@ option is for use with the local diskset only.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlength\fR\fR
 .ad
 .RS 18n
-.rt  
 Specifies the size of each replica. The default \fIlength\fR is 8192 blocks,
 which should be appropriate for most configurations. "Replica" sizes of less
 than 128 blocks are not recommended.
@@ -450,12 +400,10 @@ than 128 blocks are not recommended.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 18n
-.rt  
 Specifies updating the system file (\fB/kernel/drv/md.conf\fR) with entries
 from the \fB/etc/lvm/mddb.cf\fR file. This option is normally used to update a
 newly built system before it is booted for the first time. If the system has
@@ -467,12 +415,10 @@ use with the local diskset only.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsetname\fR\fR
 .ad
 .RS 18n
-.rt  
 Specifies the name of the diskset on which the \fBmetadb\fR command will work.
 Using the \fB-s\fR option will cause the command to perform its administrative
 function within the specified diskset. Without this option, the command will
@@ -481,12 +427,10 @@ perform its function on local database replicas.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIslice\fR\fR
 .ad
 .RS 18n
-.rt  
 Specifies the logical name of the physical slice (partition), such as
 \fB/dev/dsk/c0t0d0s3\fR.
 .RE
@@ -553,34 +497,28 @@ inoperable.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/lvm/mddb.cf\fR\fR
 .ad
 .RS 23n
-.rt  
 Contains the location of each copy of the metadevice state database.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/lvm/md.tab\fR\fR
 .ad
 .RS 23n
-.rt  
 Workspace file for metadevice database configuration.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/kernel/drv/md.conf\fR\fR
 .ad
 .RS 23n
-.rt  
 Contains database replica information for all metadevices on a system. Also
 contains Solaris Volume Manager configuration information.
 .RE
@@ -591,23 +529,19 @@ contains Solaris Volume Manager configuration information.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 successful completion
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 an error occurred
 .RE
 
@@ -619,13 +553,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/metadevadm.1m b/usr/src/man/man1m/metadevadm.1m
index a4901f73e0..fbadf2a877 100644
--- a/usr/src/man/man1m/metadevadm.1m
+++ b/usr/src/man/man1m/metadevadm.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH metadevadm 1M "26 Mar 2006" "SunOS 5.11" "System Administration Commands"
+.TH METADEVADM 1M "Mar 26, 2006"
 .SH NAME
 metadevadm \- update metadevice information
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/metadevadm\fR [\fB-h\fR] [\fB-n\fR] [ [\fB-l\fR]\fB-r\fR] [\fB-s\fR \fIsetname\fR] 
+\fB/usr/sbin/metadevadm\fR [\fB-h\fR] [\fB-n\fR] [ [\fB-l\fR]\fB-r\fR] [\fB-s\fR \fIsetname\fR]
      [\fB-u\fR \fIdisk_specifier\fR] [\fB-v\fR]
 .fi
 
@@ -29,23 +29,19 @@ This command requires root privileges.
 The following options are supported.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 21n
-.rt  
 Provide a help display.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 21n
-.rt  
 Specify that \fBmetadevadm\fR log to \fBsyslog\fR(3C). \fBmetadevadm\fR logs to
 the \fBDAEMON\fR facility at the \fBERR\fR level by default. See
 \fBsyslog.conf\fR(4) for additional information on changing logging levels.
@@ -56,23 +52,19 @@ interactively.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 21n
-.rt  
 Emulate the effect of a command, without making any changes to the system.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 21n
-.rt  
 Recompute the pathname and disk specifier (including slice) associated with all
 devices in the metadevice state database if the device supports device IDs. If
 a device does not support device IDs or the device is not available, then no
@@ -86,12 +78,10 @@ update the state database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsetname\fR\fR
 .ad
 .RS 21n
-.rt  
 Specify the name of the disk set on which \fBmetadevadm\fR works. This option
 causes the command to perform its administrative function within the specified
 disk set. Without this option, the command performs its function on devices in
@@ -100,12 +90,10 @@ the local disk set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fB\fIdisk_specifier\fR\fR\fR
 .ad
 .RS 21n
-.rt  
 Obtain the device ID associated with the \fIdisk_specifier\fR (for example,
 \fBc1t2d0\fR) of a device and update the metadevice state database. If the
 device ID has not changed this option does nothing. Use this option when a disk
@@ -115,12 +103,10 @@ changing the controller of a storage subsystem.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 21n
-.rt  
 Execute in verbose mode. This option has no effect when used with \fB-u\fR.
 Verbose is the default.
 .RE
@@ -225,34 +211,28 @@ c3t0d0
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Command was successful.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 \fBmetadevadm\fR encountered an error condition.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 An invalid device ID was detected when using the \fB-r\fR option. This is for
 use in the \fBrc2.d\fR script. See \fBinit.d\fR(4).
 .RE
@@ -265,13 +245,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/metahs.1m b/usr/src/man/man1m/metahs.1m
index e0af517266..8dc1a9009d 100644
--- a/usr/src/man/man1m/metahs.1m
+++ b/usr/src/man/man1m/metahs.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH metahs 1M "26 Mar 2006" "SunOS 5.11" "System Administration Commands"
+.TH METAHS 1M "Mar 26, 2006"
 .SH NAME
 metahs \- manage hot spares and hot spare pools
 .SH SYNOPSIS
@@ -88,7 +88,6 @@ Root privileges are required for any of the following options except \fB-i\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fBall\fR \fIcomponent\fR\fR
 .ad
@@ -99,7 +98,6 @@ Add \fIcomponent\fR to all hot spare pools. \fBall\fR is not case sensitive.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIhot_spare_pool\fR \fB[\fR\fIcomponent\fR\fB]\fR\fR
 .ad
@@ -111,7 +109,6 @@ Add the \fIcomponent\fR to the specified \fIhot_spare_pool\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fBall\fR \fIcomponent\fR\fR
 .ad
@@ -123,7 +120,6 @@ be deleted if it is in the in-use state.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIhot_spare_pool\fR \fB[\fR\fIcomponent\fR\fB]\fR\fR
 .ad
@@ -136,7 +132,6 @@ the \fIhot_spare_pool\fR. Hot spares in the in-use state cannot be deleted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIcomponent\fR\fR
 .ad
@@ -149,7 +144,6 @@ repaired.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fB[\fR\fIhot_spare_pool\fR\fB\|.\|.\|.]\fR\fR
 .ad
@@ -161,7 +155,6 @@ pools if one is not specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fBall\fR \fIcomponent-old component-new\fR\fR
 .ad
@@ -174,7 +167,6 @@ spare pool if the old hot spare is in the in-use state.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIhot_spare_pool component-old component-new\fR\fR
 .ad
@@ -187,7 +179,6 @@ the old hot spare is in the in-use state.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fB\fIsetname\fR\fR\fR
 .ad
@@ -205,24 +196,20 @@ local hot spare pools.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcomponent\fR\fR
 .ad
 .RS 18n
-.rt  
 The logical name for the physical slice (partition) on a disk drive, such as
 \fB/dev/dsk/c0t0d0s2\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIhot_spare_pool\fR\fR
 .ad
 .RS 18n
-.rt  
 Names for hot spare pools can be any legal file name that is composed of
 alphanumeric characters, a dash ("-"), an underscore ("_"), or a period (".").
 Names must begin with a letter. The words "all" and "none" are reserved and
@@ -318,23 +305,19 @@ In this example, the hot spare \fB/dev/dsk/c0t1d0s0\fR is replaced by
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -346,13 +329,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/metaimport.1m b/usr/src/man/man1m/metaimport.1m
index b7e964bf8d..1c28d9841a 100644
--- a/usr/src/man/man1m/metaimport.1m
+++ b/usr/src/man/man1m/metaimport.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH metaimport 1M "28 Oct 2005" "SunOS 5.11" "System Administration Commands"
+.TH METAIMPORT 1M "Oct 28, 2005"
 .SH NAME
 metaimport \- imports disk sets into existing Solaris Volume Manager
 configurations
@@ -58,12 +58,10 @@ before it runs.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 14n
-.rt  
 Force the import, even if a quorum of replicas from the imported disk set is
 not available. This option could result in corrupt configurations and should
 only be used when \fBmetaimport\fR fails with the "Insufficient quorum
@@ -74,24 +72,20 @@ or unavailable when importing a partial set or a set lacking a replica quorum.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 14n
-.rt  
 Does not actually perform the operation, but shows the output or errors that
 would have resulted from the operation, had it been run.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 14n
-.rt  
 Report on the non-configured disk sets found on the system. If no disk device
 or LUN is specified, \fBmetaimport\fR reports on all non-configured disk sets
 attached to the system. When the name of one disk is specified,
@@ -108,12 +102,10 @@ output on each disk set reported.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsetname\fR\fR
 .ad
 .RS 14n
-.rt  
 Specify the disk set name to use when importing. The imported disk set will be
 called \fIsetname\fR, without regard to the name it may have had on a different
 system.
@@ -121,12 +113,10 @@ system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 14n
-.rt  
 Verbose. Provides detailed information about the \fBmetadb\fR replica location
 and status. It also provides detailed information about the disk set
 configuration and status similar to the "\fBmetastat -c\fR" output.
@@ -134,23 +124,19 @@ configuration and status similar to the "\fBmetastat -c\fR" output.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
 .RS 14n
-.rt  
 Version information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-?\fR\fR
 .ad
 .RS 14n
-.rt  
 Display a help message.
 .RE
 
@@ -198,23 +184,19 @@ generate results more quickly.
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -226,13 +208,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/metainit.1m b/usr/src/man/man1m/metainit.1m
index cf0f7a2446..10e989957b 100644
--- a/usr/src/man/man1m/metainit.1m
+++ b/usr/src/man/man1m/metainit.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH metainit 1M "27 Mar 2006" "SunOS 5.11" "System Administration Commands"
+.TH METAINIT 1M "Mar 27, 2006"
 .SH NAME
 metainit \- configure metadevices
 .SH SYNOPSIS
@@ -20,27 +20,27 @@ metainit \- configure metadevices
 
 .LP
 .nf
-\fB/sbin/metainit\fR [\fIwidth\fR \fIcomponent...\fR [\fB-i\fR \fIinterlace\fR]] 
+\fB/sbin/metainit\fR [\fIwidth\fR \fIcomponent...\fR [\fB-i\fR \fIinterlace\fR]]
      [\fB-h\fR \fIhot_spare_pool\fR]
 .fi
 
 .LP
 .nf
-\fB/sbin/metainit\fR [\fIgeneric options\fR] \fImirror\fR \fB-m\fR \fIsubmirror\fR 
-     [\fIread_options\fR] [\fIwrite_options\fR] 
+\fB/sbin/metainit\fR [\fIgeneric options\fR] \fImirror\fR \fB-m\fR \fIsubmirror\fR
+     [\fIread_options\fR] [\fIwrite_options\fR]
      [\fIpass_num\fR]
 .fi
 
 .LP
 .nf
-\fB/sbin/metainit\fR [\fIgeneric options\fR] \fIRAID\fR \fB-r\fR \fIcomponent...\fR 
-     [\fB-i\fR \fIinterlace\fR] 
+\fB/sbin/metainit\fR [\fIgeneric options\fR] \fIRAID\fR \fB-r\fR \fIcomponent...\fR
+     [\fB-i\fR \fIinterlace\fR]
      [\fB-h\fR \fIhot_spare_pool\fR] [\fB-k\fR] [\fB-o\fR \fIoriginal_column_count\fR]
 .fi
 
 .LP
 .nf
-\fB/sbin/metainit\fR [\fIgeneric options\fR] \fIhot_spare_pool\fR 
+\fB/sbin/metainit\fR [\fIgeneric options\fR] \fIhot_spare_pool\fR
      [\fIhotspare...\fR]
 .fi
 
@@ -56,7 +56,7 @@ metainit \- configure metadevices
 
 .LP
 .nf
-\fB/sbin/metainit\fR [\fIgeneric options\fR] \fIsoftpart\fR \fB-p\fR [\fB-e\fR] \fIcomponent\fR 
+\fB/sbin/metainit\fR [\fIgeneric options\fR] \fIsoftpart\fR \fB-p\fR [\fB-e\fR] \fIcomponent\fR
      [\fB-A\fR \fIalignment\fR] \fIsize\fR
 .fi
 
@@ -127,7 +127,6 @@ Root privileges are required for all of the following options except \fB-h\fR.
 The following generic options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -142,7 +141,6 @@ option is required when configuring mirrors on root (\fB/\fR), \fBswap\fR, and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -153,7 +151,6 @@ Displays usage message.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -166,7 +163,6 @@ not initialized.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -180,7 +176,6 @@ previously configured metadevices is stored in the metadevice state database
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fB\fIsetname\fR\fR\fR
 .ad
@@ -197,7 +192,6 @@ and/or hotspares.
 The following concat/stripe options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIconcat/stripe\fR\fR
 .ad
@@ -209,7 +203,6 @@ stripes being defined.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fInumstripes\fR\fR
 .ad
@@ -223,7 +216,6 @@ varies according to the number of stripes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIwidth\fR\fR
 .ad
@@ -235,7 +227,6 @@ greater than 1, the slices are striped.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcomponent\fR\fR
 .ad
@@ -248,7 +239,6 @@ slices is necessary to enable striping of the parity information across slices.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fB\fIinterlace\fR\fR\fR
 .ad
@@ -265,7 +255,6 @@ cannot be less than 16 blocks, or greater than 100 megabytes. If
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fB\fIhot_spare_pool\fR\fR\fR
 .ad
@@ -289,7 +278,6 @@ cannot be used.
 The following mirror options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fImirror\fR \fB-m\fR \fI\fR\fIsubmirror\fR\fI\fR\fR
 .ad
@@ -307,7 +295,6 @@ any subsequent submirrors are first created using the \fBmetainit\fR command.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIread_options\fR\fR
 .ad
@@ -316,7 +303,6 @@ any subsequent submirrors are first created using the \fBmetainit\fR command.)
 The following read options for mirrors are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR\fR
 .ad
@@ -328,7 +314,6 @@ sequential reads.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -346,7 +331,6 @@ balancing across the submirrors.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIwrite_options\fR\fR
 .ad
@@ -355,7 +339,6 @@ balancing across the submirrors.
 The following write options for mirrors are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR\fR
 .ad
@@ -371,7 +354,6 @@ dispatched to all mirrors simultaneously.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpass_num\fR\fR
 .ad
@@ -390,7 +372,6 @@ for mirrors mounted as read-only, or as \fBswap\fR.
 The following RAID level 5 options are available:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIRAID\fR \fB-r\fR\fR
 .ad
@@ -402,7 +383,6 @@ the configuration is RAID level 5.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR\fR
 .ad
@@ -421,7 +401,6 @@ data from tape.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fB\fIoriginal_column_count\fR\fR\fR
 .ad
@@ -445,7 +424,6 @@ data from tape.
 The following soft partition options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsoftpart\fR \fB-p\fR [\fB-e\fR] \fIcomponent\fR [\fB-A\fR
 \fIalignment\fR] \fIsize\fR\fR
@@ -493,7 +471,6 @@ partition should occupy all available space on the device.
 The following hot spare pool options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIhot_spare_pool\fR \fI\fR\fB[\fR\fI\fR \fI\fR\fIhotspare...\fR\fI\fR
 \fI\fR\fB]\fR\fI\fR\fR
@@ -515,7 +492,6 @@ used.
 The following \fBmd.tab\fR file options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fImetadevice-name\fR\fR
 .ad
@@ -539,7 +515,6 @@ based on the configuration information found in the \fBmd.tab\fR file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -604,7 +579,7 @@ concatenation of four slices.
 .sp
 .in +2
 .nf
-# metainit d7 4 1 c0t1d0s0 1 c0t2d0s0 1 c0t3d0s0 1 /dev/dsk/c0t4d0s0 
+# metainit d7 4 1 c0t1d0s0 1 c0t2d0s0 1 c0t3d0s0 1 /dev/dsk/c0t4d0s0
 .fi
 .in -2
 .sp
@@ -864,7 +839,6 @@ with an alignment of \fB1m\fR to define the soft partition extent alignment.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/lvm/md.tab\fR\fR
 .ad
@@ -920,7 +894,7 @@ is displayed:
 .in +2
 .nf
 WARNING: This form of metainit is not recommended.
-The stripe is truncating the size of the underlying device. 
+The stripe is truncating the size of the underlying device.
 Please see ERRORS in metainit(1M) for additional information.
 .fi
 .in -2
@@ -966,7 +940,6 @@ Setting this flag degrades performance.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -977,7 +950,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
@@ -994,13 +966,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/metaoffline.1m b/usr/src/man/man1m/metaoffline.1m
index 446ac6903c..87af1fd3ff 100644
--- a/usr/src/man/man1m/metaoffline.1m
+++ b/usr/src/man/man1m/metaoffline.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH metaoffline 1M "26 Mar 2006" "SunOS 5.11" "System Administration Commands"
+.TH METAOFFLINE 1M "Mar 26, 2006"
 .SH NAME
 metaoffline, metaonline \- place submirrors offline and online
 .SH SYNOPSIS
@@ -67,34 +67,28 @@ only be mounted as read-only.
 Root privileges are required for all of the following options except \fB-h\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 14n
-.rt  
 Forces offlining of submirrors that have slices requiring maintenance.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 14n
-.rt  
 Displays usage message.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fB\fIsetname\fR\fR\fR
 .ad
 .RS 14n
-.rt  
 Specifies the name of the diskset on which \fBmetaoffline\fR and
 \fBmetaonline\fR will work. Using the \fB-s\fR option will cause the command to
 perform its administrative function within the specified diskset. Without this
@@ -103,24 +97,20 @@ option, the command will perform its function on local metadevices.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fImirror\fR\fR
 .ad
 .RS 14n
-.rt  
 Specifies the metadevice name of the mirror from which the submirror will be
 either taken offline or put online.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsubmirror\fR\fR
 .ad
 .RS 14n
-.rt  
 Specifies the metadevice name of the submirror to be either taken offline or
 put online.
 .RE
@@ -147,23 +137,19 @@ This example takes one submirror, \fBmymirror_sub1\fR, offline from mirror
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -175,13 +161,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/metaparam.1m b/usr/src/man/man1m/metaparam.1m
index 134338d5bf..3cfb8a7537 100644
--- a/usr/src/man/man1m/metaparam.1m
+++ b/usr/src/man/man1m/metaparam.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH metaparam 1M "26 Mar 2006" "SunOS 5.11" "System Administration Commands"
+.TH METAPARAM 1M "Mar 26, 2006"
 .SH NAME
 metaparam \- modify parameters of metadevices
 .SH SYNOPSIS
@@ -14,7 +14,7 @@ metaparam \- modify parameters of metadevices
 
 .LP
 .nf
-\fB/usr/sbin/metaparam\fR [\fB-s\fR \fIsetname\fR] 
+\fB/usr/sbin/metaparam\fR [\fB-s\fR \fIsetname\fR]
      [\fIconcat/stripe\fR \fIor\fR \fIRAID5\fR \fIoptions\fR] \fIconcat/stripe\fR \fIRAID\fR
 .fi
 
@@ -47,7 +47,6 @@ Root privileges are required for all of the options.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -58,7 +57,6 @@ Displays usage message.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fB\fIsetname\fR\fR\fR
 .ad
@@ -73,7 +71,6 @@ function on local metadevices.
 .SH CONCAT/STRIPE OR RAID5 OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fIhot_spare_pool\fR \fB| none\fR\fR
 .ad
@@ -87,7 +84,6 @@ cannot replace the hot spare pool.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIconcat/stripe\fR \fB|\fR\fIRAID\fR\fR
 .ad
@@ -100,7 +96,6 @@ stripes, or of the RAID5 metadevice.
 .SH MIRROR OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r roundrobin | geometric | first\fR\fR
 .ad
@@ -116,7 +111,6 @@ the first submirror.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w parallel | serial\fR\fR
 .ad
@@ -130,7 +124,6 @@ the \fBmetainit\fR command, specifies that all writes are parallel.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIpass_number\fR\fR
 .ad
@@ -144,7 +137,6 @@ pass numbers are run concurrently. If 0 is used, the mirror resync is skipped.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fImirror\fR\fR
 .ad
@@ -190,7 +182,6 @@ roundrobin to geometric.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -201,7 +192,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
@@ -218,13 +208,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/metarecover.1m b/usr/src/man/man1m/metarecover.1m
index b9fbf8fcd2..9d0355ec5b 100644
--- a/usr/src/man/man1m/metarecover.1m
+++ b/usr/src/man/man1m/metarecover.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH metarecover 1M "26 Mar 2006" "SunOS 5.11" "System Administration Commands"
+.TH METARECOVER 1M "Mar 26, 2006"
 .SH NAME
 metarecover \- recover soft partition information
 .SH SYNOPSIS
@@ -33,24 +33,20 @@ partition configuration information and to regenerate the configuration.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 14n
-.rt  
 Recover soft partitions in the metadevice state database from the extent
 headers on the device. Options \fB-d\fR and \fB-m\fR are mutually exclusive.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
 .RS 14n
-.rt  
 Regenerate the extent headers and reapplies them to the underlying device based
 on the soft partitions listed in the metadevice state database. Options
 \fB-d\fR and \fB-m\fR are mutually exclusive.
@@ -58,24 +54,20 @@ on the soft partitions listed in the metadevice state database. Options
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 14n
-.rt  
 Do not actually perform the operation. Show the output or errors that would
 have resulted from the operation, had it been run.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 14n
-.rt  
 Regenerate soft partitions based on the metadevice state database or extent
 headers on the underlying device. If neither \fB-d\fR nor \fB-m\fR are
 specified, this option compares the soft partition information in the
@@ -84,12 +76,10 @@ metadevice state database to the extent headers.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsetname\fR\fR
 .ad
 .RS 14n
-.rt  
 Specify the name of the diskset on which \fBmetarecover\fR works. Using the
 \fBs\fR option causes the command to perform its function within the specified
 diskset. Without the \fB-s\fR option, the \fBmetarecover\fR command operates on
@@ -102,12 +92,10 @@ which the \fBsps\fR were created. The set numbers, however, seem irrelevant.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 14n
-.rt  
 Verbose mode, displaying the changes being made.
 .RE
 
@@ -117,12 +105,10 @@ Verbose mode, displaying the changes being made.
 The following operand is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcomponent\fR\fR
 .ad
 .RS 13n
-.rt  
 Specifies the \fBc*t*d*s*\fR number of the disk or slice containing the
 partitions, or the device name (for example, \fBd10\fR) of the metadevice
 containing the partitions.
@@ -216,23 +202,19 @@ with only the \fB-p\fR flag.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -244,13 +226,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/metarename.1m b/usr/src/man/man1m/metarename.1m
index 96405511c3..f425ca00f4 100644
--- a/usr/src/man/man1m/metarename.1m
+++ b/usr/src/man/man1m/metarename.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH metarename 1M "26 Mar 2006" "SunOS 5.11" "System Administration Commands"
+.TH METARENAME 1M "Mar 26, 2006"
 .SH NAME
 metarename \- rename metadevice or switch layered metadevice names
 .SH SYNOPSIS
@@ -77,34 +77,28 @@ Only metadevices can be switched, not slices.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 15n
-.rt  
 Force the switching of trans metadevice members.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 15n
-.rt  
 Display a help message.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fB\fIsetname\fR\fR\fR
 .ad
 .RS 15n
-.rt  
 Specifies the name of the diskset on which \fBmetarename\fR will work. Using
 the \fB-s\fR option will cause the command to perform its administrative
 function within the specified diskset. Without this option, the command will
@@ -113,34 +107,28 @@ perform its function on the local metadevices.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
 .RS 15n
-.rt  
 Exchange the metadevice names \fImetadevice1\fR and \fImetadevice2\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fImetadevice1\fR\fR
 .ad
 .RS 15n
-.rt  
 Specifies the metadevice to be renamed or switched.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fImetadevice2\fR\fR
 .ad
 .RS 15n
-.rt  
 Specifies the target metadevice name for the rename or switch operation.
 .RE
 
@@ -250,23 +238,19 @@ trans metadevice \fBd2\fR and the logging device \fBd5\fR. \fBd10\fR must be
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -278,13 +262,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/metareplace.1m b/usr/src/man/man1m/metareplace.1m
index 6c73167edb..fbdf90c8bc 100644
--- a/usr/src/man/man1m/metareplace.1m
+++ b/usr/src/man/man1m/metareplace.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH metareplace 1M "26 Mar 2006" "SunOS 5.11" "System Administration Commands"
+.TH METAREPLACE 1M "Mar 26, 2006"
 .SH NAME
 metareplace \- enable or replace components of submirrors or RAID5 metadevices
 .SH SYNOPSIS
@@ -62,12 +62,10 @@ data loss, it is always best to back up all data before replacing \fBLast\fR
 Root privileges are required for all of the following options except \fB-h\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
 .RS 17n
-.rt  
 Transitions the state of \fIcomponent\fR to the available state and resyncs the
 failed component. If the failed component has been hot spare replaced, the hot
 spare is placed in the available state and made available for other hot spare
@@ -80,12 +78,10 @@ partitioned to match the disk being replaced before running the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 17n
-.rt  
 Forces the replacement of an errored component of a metadevice in which
 multiple components are in error. The component determined by the
 \fBmetastat\fR display to be in the ``Maintenance'' state must be replaced
@@ -95,23 +91,19 @@ are in error.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 17n
-.rt  
 Display help message.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fB\fIsetname\fR\fR\fR
 .ad
 .RS 17n
-.rt  
 Specifies the name of the diskset on which \fBmetareplace\fR will work. Using
 the \fB-s\fR option will cause the command to perform its administrative
 function within the specified diskset. Without this option, the command will
@@ -120,57 +112,47 @@ perform its function on local metadevices.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fImirror\fR\fR
 .ad
 .RS 17n
-.rt  
 The metadevice name of the mirror.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcomponent\fR\fR
 .ad
 .RS 17n
-.rt  
 The logical name for the physical slice (partition) on a disk drive, such as
 \fB/dev/dsk/c0t0d0s2\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcomponent-old\fR\fR
 .ad
 .RS 17n
-.rt  
 The physical slice that is being replaced.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcomponent-new\fR\fR
 .ad
 .RS 17n
-.rt  
 The physical slice that is replacing \fIcomponent-old\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIRAID\fR\fR
 .ad
 .RS 17n
-.rt  
 The metadevice name of the RAID5 device.
 .RE
 
@@ -222,23 +204,19 @@ replacing before running the \fBmetareplace\fR command.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -250,13 +228,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/metaroot.1m b/usr/src/man/man1m/metaroot.1m
index a5f96b9bde..f443ef884a 100644
--- a/usr/src/man/man1m/metaroot.1m
+++ b/usr/src/man/man1m/metaroot.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH metaroot 1M "26 Mar 2006" "SunOS 5.11" "System Administration Commands"
+.TH METAROOT 1M "Mar 26, 2006"
 .SH NAME
 metaroot \- setup system files for root (/) metadevice
 .SH SYNOPSIS
@@ -14,7 +14,7 @@ metaroot \- setup system files for root (/) metadevice
 
 .LP
 .nf
-\fB/usr/sbin/metaroot\fR [\fB-n\fR] [\fB-k\fR \fIsystem-name\fR] [\fB-v\fR \fIvfstab-name\fR] 
+\fB/usr/sbin/metaroot\fR [\fB-n\fR] [\fB-k\fR \fIsystem-name\fR] [\fB-v\fR \fIvfstab-name\fR]
      [\fB-c\fR \fImddb.cf-name\fR] [\fB-m\fR \fImd.conf-name\fR] [\fB-R\fR \fIroot-path\fR] \fIdevice\fR
 .fi
 
@@ -40,70 +40,58 @@ Root privileges are required for all of the following options except \fB-h\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fImddb.cf-name\fR\fR
 .ad
 .RS 19n
-.rt  
 Use \fImddb.cf-name\fR instead of the default \fB/etc/lvm/mddb.cf\fR file as a
 source of metadevice database locations.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 19n
-.rt  
 Display a usage message.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR \fIsystem-name\fR\fR
 .ad
 .RS 19n
-.rt  
 Edit a user-supplied \fIsystem-name\fR instead of the default \fB/etc/system\fR
 system configuration information file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fImd.conf-name\fR\fR
 .ad
 .RS 19n
-.rt  
 Edit the configuration file specified by \fImd.conf-name\fR rather than the
 default, \fB/kernel/drv/md.conf\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 19n
-.rt  
 Print what would be done without actually doing it.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-path\fR\fR
 .ad
 .RS 19n
-.rt  
 When metaroot modifies system files, it accesses them in their relative
 location under \fIroot-path\fR.
 .sp
@@ -122,12 +110,10 @@ zone's file system. See \fBzones\fR(5).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR \fIvfstab-name\fR\fR
 .ad
 .RS 19n
-.rt  
 Edit \fIvfstab-name\fR instead of the default \fB/etc/vfstab\fR table of file
 system defaults.
 .RE
@@ -138,12 +124,10 @@ system defaults.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdevice\fR\fR
 .ad
 .RS 10n
-.rt  
 Specifies either the metadevice or the conventional disk device (slice) used
 for the root file system (\fB/\fR).
 .RE
@@ -196,45 +180,37 @@ that the root file system is now on the SCSI disk device
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/system\fR\fR
 .ad
 .RS 23n
-.rt  
 System configuration information file. See \fBsystem\fR(4).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vfstab\fR\fR
 .ad
 .RS 23n
-.rt  
 File system defaults.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/lvm/mddb.cf\fR\fR
 .ad
 .RS 23n
-.rt  
 Metadevice state database locations.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/kernel/drv/md.conf\fR\fR
 .ad
 .RS 23n
-.rt  
 Configuration file for the metadevice driver, \fBmd\fR.
 .RE
 
@@ -244,23 +220,19 @@ Configuration file for the metadevice driver, \fBmd\fR.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -272,13 +244,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/metaset.1m b/usr/src/man/man1m/metaset.1m
index f8cf1414e7..c9d1b81d16 100644
--- a/usr/src/man/man1m/metaset.1m
+++ b/usr/src/man/man1m/metaset.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH metaset 1M "4 Mar 2009" "SunOS 5.11" "System Administration Commands"
+.TH METASET 1M "Mar 4, 2009"
 .SH NAME
 metaset \- configure disk sets
 .SH SYNOPSIS
@@ -89,7 +89,7 @@ metaset \- configure disk sets
 
 .LP
 .nf
-\fB/usr/sbin/metaset\fR [\fB-s\fR \fIsetname\fR] \fB-a\fR | \fB-d\fR 
+\fB/usr/sbin/metaset\fR [\fB-s\fR \fIsetname\fR] \fB-a\fR | \fB-d\fR
      [ [m] \fImediator_host_list\fR]
 .fi
 
@@ -259,7 +259,6 @@ Use the \fB-m\fR option to add or delete a mediator host. See \fBOPTIONS\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIdrivename\fR\fR
 .ad
@@ -292,7 +291,6 @@ pathname for each drive. Such a name has the form:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR | \fB-d\fR | \fB-m\fR \fImediator_host_list\fR\fR
 .ad
@@ -311,7 +309,6 @@ hosts. See \fBEXAMPLES\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR \fB{enable | disable}\fR\fR
 .ad
@@ -330,7 +327,6 @@ unavailable for mounting through \fB/etc/vfstab\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR\fR
 .ad
@@ -345,7 +341,6 @@ that the distribution of replicas matches the replica layout algorithm.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR \fB{take | release | purge}\fR\fR
 .ad
@@ -357,7 +352,6 @@ Repository. These options should only be used to fix a broken disk set
 configuration.
 .sp
 .ne 2
-.mk
 .na
 \fBtake\fR
 .ad
@@ -369,7 +363,6 @@ disk set is available. This option is not for use with a multi-owner disk set.
 
 .sp
 .ne 2
-.mk
 .na
 \fBrelease\fR
 .ad
@@ -383,7 +376,6 @@ multi-owner disk set.
 
 .sp
 .ne 2
-.mk
 .na
 \fBpurge\fR
 .ad
@@ -398,7 +390,6 @@ accessible and requires rebuilding.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdrivename\fR\fR
 .ad
@@ -427,7 +418,6 @@ master node while other nodes are in the set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -458,7 +448,6 @@ list of hosts to clean up after one-host administration has been performed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fB\fIhostname...\fR\fR\fR
 .ad
@@ -473,7 +462,6 @@ host. The host name is the same name found in \fB/etc/nodename\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-j\fR\fR
 .ad
@@ -521,7 +509,6 @@ disk set starts any necessary resynchronizations.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR\fR
 .ad
@@ -533,7 +520,6 @@ standard Solaris Volume Manager algorithm. See \fBDESCRIPTION\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlength\fR\fR
 .ad
@@ -548,7 +534,6 @@ not recommended.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR\fR
 .ad
@@ -564,7 +549,6 @@ Existing disk sets cannot be converted to multi-owner sets.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
@@ -576,7 +560,6 @@ the \fB-h\fR option is the owner of the disk set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR\fR
 .ad
@@ -592,7 +575,6 @@ If you need to delete a disk set but cannot take ownership of the set, use the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
@@ -606,7 +588,6 @@ This option is not for use with a multi-owner disk set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -620,7 +601,6 @@ This option is not for use with a multi-owner disk set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fB\fIsetname\fR\fR\fR
 .ad
@@ -632,7 +612,6 @@ Specify the name of a disk set on which \fBmetaset\fR works. If no
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
@@ -654,7 +633,6 @@ This option is not for use with a multi-owner disk set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fItagnumber\fR\fR
 .ad
@@ -666,7 +644,6 @@ can be executed to select the data associated with the given \fItagnumber\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBw\fR
 .ad
@@ -701,7 +678,6 @@ host from the ownership list.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-y\fR\fR
 .ad
@@ -853,7 +829,6 @@ drives within the set have been deleted.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/lvm/md.tab\fR\fR
 .ad
@@ -868,7 +843,6 @@ Contains list of metadevice configurations.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -879,7 +853,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
@@ -896,13 +869,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/metassist.1m b/usr/src/man/man1m/metassist.1m
index 18d76726a0..fa12abdc90 100644
--- a/usr/src/man/man1m/metassist.1m
+++ b/usr/src/man/man1m/metassist.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH metassist 1M "22 Feb 2005" "SunOS 5.11" "System Administration Commands"
+.TH METASSIST 1M "Feb 22, 2005"
 .SH NAME
 metassist \- automated volume creation utility to support Solaris Volume
 Manager
@@ -30,9 +30,9 @@ Manager
 
 .LP
 .nf
-\fBmetassist\fR create [\fB-v\fR \fIn\fR] [\fB-c\fR | \fB-d\fR] [\fB-f\fR] [\fB-n\fR \fIname\fR] 
-     [\fB-p\fR \fIdatapaths\fR] [\fB-r\fR \fIredundancy\fR] 
-     [\fB-a\fR \fIavailable\fR [,\fIavailable\fR,\&.\|.\|.]] 
+\fBmetassist\fR create [\fB-v\fR \fIn\fR] [\fB-c\fR | \fB-d\fR] [\fB-f\fR] [\fB-n\fR \fIname\fR]
+     [\fB-p\fR \fIdatapaths\fR] [\fB-r\fR \fIredundancy\fR]
+     [\fB-a\fR \fIavailable\fR [,\fIavailable\fR,\&.\|.\|.]]
      [\fB-u\fR \fIunavailable\fR [,\fIunavailable\fR,\&.\|.\|.]] \fB-s\fR \fIsetname\fR \fB-S\fR \fIsize\fR
 .fi
 
@@ -52,12 +52,10 @@ common Solaris Volume Manager tasks.
 The following subcommands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcreate\fR\fR
 .ad
 .RS 10n
-.rt  
 The \fBcreate\fR subcommand creates one or more Solaris Volume Manager volumes.
 You can specify this request on the command line or in a file specified on the
 command line.
@@ -109,7 +107,6 @@ The following option is mandatory if you specify a volume request or volume
 configuration in a file:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fIconfig_file\fR | \fIrequest_file\fR\fR
 .ad
@@ -129,12 +126,10 @@ The following options are mandatory if you specify a volume request on the
 command line:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIset\fR\fR
 .ad
 .RS 11n
-.rt  
 Specify the disk set to use when creating volumes. All the volumes and hot
 spare pools are created in this disk set. If necessary, disks are moved into
 the diskset for use in the volumes and hot spare pools. If the diskset doesn't
@@ -145,12 +140,10 @@ allowed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR \fIsize\fR\fR
 .ad
 .RS 11n
-.rt  
 Specify the size of the volume to be created. The size argument consists of a
 numeric value (a decimal can be specified) followed by KB, MB, GB, or TB,
 indicating kilobytes, megabytes, gigabytes, or terabytes, respectively. Case is
@@ -162,12 +155,10 @@ ignored when interpreting this option. This option is required.
 The following options are optional command line parameters:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIdevice1\fR\fB,\fR\fIdevice2\fR\fB,...\fR\fR
 .ad
 .RS 26n
-.rt  
 Explicitly specify the devices that can be used in the creation of this volume.
 Named devices may be controllers or disks. Only used when specifying a volume
 on the command line.
@@ -175,12 +166,10 @@ on the command line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 26n
-.rt  
 Output the command script that would implement the specified or generated
 volume configuration. The command script is not run, and processing stops at
 this stage.
@@ -188,12 +177,10 @@ this stage.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 26n
-.rt  
 Output the volume configuration that satisfies the specified or generated
 volume request. No command script is generated or executed, and processing
 stops at this stage.
@@ -201,12 +188,10 @@ stops at this stage.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 26n
-.rt  
 Specify whether the volume should support automatic component replacement after
 a fault. If this option is specified, a mirror is created and its submirrors
 are associated with a hot spare.
@@ -214,24 +199,20 @@ are associated with a hot spare.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fIname\fR\fR
 .ad
 .RS 26n
-.rt  
 Specify the name of the new volume. See \fBmetainit\fR(1M) for naming
 guidelines.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIn\fR\fR
 .ad
 .RS 26n
-.rt  
 Specify the number of required paths to the storage volume. The value of
 \fIn\fR cannot be greater than the number of different physical paths and
 logical paths to attached storage. Only used when specifying a volume on the
@@ -240,12 +221,10 @@ command line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIn\fR\fR
 .ad
 .RS 26n
-.rt  
 Specify the redundancy level (\fB0\fR-\fB4\fR) of the data. The default is
 \fB0\fR. Only used when specifying a volume on the command line. If redundancy
 is \fB0\fR, a stripe is created. If redundancy is \fB1\fR or greater, a mirror
@@ -258,12 +237,10 @@ failures.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIdevice1\fR\fB,\fR\fIdevice2\fR\fB,...\fR\fR
 .ad
 .RS 26n
-.rt  
 Explicitly specify devices to exclude in the creation of this volume. Named
 devices can be controllers or disks. You can use this option alone, or to
 exclude some of the devices listed as available with the \fB-a\fR option, Only
@@ -272,12 +249,10 @@ used when specifying a volume on the command line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR \fIvalue\fR\fR
 .ad
 .RS 26n
-.rt  
 Specify the level of verbosity. Values from \fB0\fR to \fB2\fR are available,
 with higher numbers specifying more verbose output when the command is run.
 \fB-v\fR \fB0\fR indicates silent output, except for errors or other critical
@@ -286,23 +261,19 @@ messages. The default level is \fB1\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
 .RS 26n
-.rt  
 Display program version information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-?\fR\fR
 .ad
 .RS 26n
-.rt  
 Display help information. This option can follow a subcommand for
 subcommand-specific help.
 .RE
@@ -438,58 +409,51 @@ you can run later:
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/share/lib/xml/dtd/volume-request.dtd\fR\fR
 .ad
 .sp .6
 .RS 4n
- 
+
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/share/lib/xml/dtd/volume-defaults.dtd\fR\fR
 .ad
 .sp .6
 .RS 4n
- 
+
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/share/lib/xml/dtd/volume-config.dtd\fR\fR
 .ad
 .sp .6
 .RS 4n
- 
+
 .RE
 
 .SH ATTRIBUTES
@@ -500,13 +464,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Inteface StabilityStable
+Inteface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/metastat.1m b/usr/src/man/man1m/metastat.1m
index e5938c4bd6..73eb0ca843 100644
--- a/usr/src/man/man1m/metastat.1m
+++ b/usr/src/man/man1m/metastat.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH metastat 1M "26 Mar 2006" "SunOS 5.11" "System Administration Commands"
+.TH METASTAT 1M "Mar 26, 2006"
 .SH NAME
 metastat \- display status for metadevice or hot spare pool
 .SH SYNOPSIS
@@ -14,13 +14,13 @@ metastat \- display status for metadevice or hot spare pool
 
 .LP
 .nf
-\fB/usr/sbin/metastat\fR [\fB-a\fR] [\fB-B\fR] [\fB-D\fR] [\fB-c\fR] [\fB-i\fR] [\fB-p\fR] [\fB-q\fR] 
+\fB/usr/sbin/metastat\fR [\fB-a\fR] [\fB-B\fR] [\fB-D\fR] [\fB-c\fR] [\fB-i\fR] [\fB-p\fR] [\fB-q\fR]
      [\fB-s\fR \fIsetname\fR] [\fB-t\fR] [\fImetadevice...\fR] [\fIhot_spare_pool\fR...]
 .fi
 
 .LP
 .nf
-\fB/usr/sbin/metastat\fR [\fB-a\fR] [\fB-B\fR] [\fB-D\fR] [\fB-c\fR] [\fB-i\fR] [\fB-p\fR] [\fB-q\fR] 
+\fB/usr/sbin/metastat\fR [\fB-a\fR] [\fB-B\fR] [\fB-D\fR] [\fB-c\fR] [\fB-i\fR] [\fB-p\fR] [\fB-q\fR]
      [\fB-s\fR \fIsetname\fR] \fIcomponent\fR...
 .fi
 
@@ -41,23 +41,19 @@ command to view the status of the metadevice.
 on the system. The possible states include:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBOkay\fR\fR
 .ad
 .RS 21n
-.rt  
 The device reports no errors.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNeeds maintenance\fR\fR
 .ad
 .RS 21n
-.rt  
 A problem has been detected. This requires that the system administrator
 replace the failed physical device. Volumes displaying \fBNeeds maintenance\fR
 have incurred no data loss, although additional failures could risk data loss.
@@ -66,12 +62,10 @@ Take action as quickly as possible.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLast erred\fR\fR
 .ad
 .RS 21n
-.rt  
 A problem has been detected. Data loss is a possibility. This might occur if a
 component of a submirror fails and is not replaced by a hot spare, therefore
 going into \fBNeeds maintenance\fR state. If the corresponding component also
@@ -81,12 +75,10 @@ valid data source, data loss could be a possibility.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBUnavailable\fR\fR
 .ad
 .RS 21n
-.rt  
 A device cannot be accessed, but has not incurred errors. This might occur if a
 physical device has been removed with Solaris Dynamic Reconfiguration (DR)
 features, thus leaving the Solaris Volume Manager volume unavailable. It could
@@ -108,35 +100,29 @@ Needs maintenance or Last erred states.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 14n
-.rt  
 Display all disk sets. Only metadevices in disk sets that are owned by the
 current host are displayed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-B\fR\fR
 .ad
 .RS 14n
-.rt  
 Display the current status of all of the 64-bit metadevices and hot spares.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 14n
-.rt  
 Display concise output.
 .sp
 There is one line of output for each metadevice. The output shows the basic
@@ -149,35 +135,29 @@ human-readable output.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
 .RS 14n
-.rt  
 Display the current status of all of the descriptive name metadevices and
 hotspares.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 14n
-.rt  
 Display usage message.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 14n
-.rt  
 Check the status of RAID-1 (mirror) volumes, RAID-5 volumes, and hot spares.
 The inquiry checks each metadevice for accessibility, starting at the top level
 metadevice. When problems are discovered, the metadevice state databases are
@@ -186,12 +166,10 @@ updated as if an error had occurred.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 14n
-.rt  
 Display the list of active metadevices and hot spare pools in the same format
 as \fBmd.tab\fR. See \fBmd.tab\fR(4).
 .sp
@@ -201,23 +179,19 @@ recovery or setup.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
 .RS 14n
-.rt  
 Display the status for metadevices without the device relocation information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fB\fIsetname\fR\fR\fR
 .ad
 .RS 14n
-.rt  
 Specify the name of the disk set on which \fBmetastat\fR works. Using the
 \fB-s\fR option causes the command to perform its administrative function
 within the specified disk set. Without this option, the command performs its
@@ -226,12 +200,10 @@ function on metadevices and hot spare pools in the local disk set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
 .RS 14n
-.rt  
 Display the current status and timestamp for the specified metadevices and hot
 spare pools. The timestamp provides the date and time of the last state change.
 .RE
@@ -242,35 +214,29 @@ spare pools. The timestamp provides the date and time of the last state change.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcomponent\fR\fR
 .ad
 .RS 18n
-.rt  
 Display the status of the component hosting a soft partition, including
 extents, starting blocks, and block count.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIhot_spare_pool\fR\fR
 .ad
 .RS 18n
-.rt  
 Display the status of the specified hot spare pool(s).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fImetadevice\fR\fR
 .ad
 .RS 18n
-.rt  
 Display the status of the specified metadevice(s). If a trans metadevice is
 specified, the status of the master and log devices is also displayed. Trans
 metadevices have been replaced by UFS logging. See \fBNOTES\fR.
@@ -289,7 +255,7 @@ after creating a mirror, \fBopt_mirror\fR, consisting of two submirrors,
 .in +2
 .nf
 # metastat opt_mirror
-opt_mirror: Mirror 
+opt_mirror: Mirror
     Submirror 0: opt_sub1
       State: Okay
     Submirror 1: opt_sub2
@@ -395,7 +361,7 @@ oban/d100: Mirror
     Pass: 1
     Read option: roundrobin (default)
     Write option: parallel (default)
-    Resync option: application based 
+    Resync option: application based
     Owner: None
     Size: 1027216 blocks (501 MB)
 
@@ -410,7 +376,7 @@ oban/d11: Submirror of oban/d100
     State: Okay
     Size: 1027216 blocks (501 MB)
     Stripe 0:
-        Device     Start Block  Dbase     State Reloc Hot Spare 
+        Device     Start Block  Dbase     State Reloc Hot Spare
         c1t4d0s0          0     No         Okay
 .fi
 .in -2
@@ -448,23 +414,19 @@ A slice may go into an error state after \fBmetastat\fR \fB-p\fR is issued.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -476,13 +438,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/metasync.1m b/usr/src/man/man1m/metasync.1m
index bb61ddf3b0..6d24929689 100644
--- a/usr/src/man/man1m/metasync.1m
+++ b/usr/src/man/man1m/metasync.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH metasync 1M "27 Mar 2006" "SunOS 5.11" "System Administration Commands"
+.TH METASYNC 1M "Mar 27, 2006"
 .SH NAME
 metasync \- handle metadevice resync during reboot
 .SH SYNOPSIS
@@ -53,12 +53,10 @@ Use the \fB-r\fR option in boot scripts to resync all possible submirrors.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fImetadevice\fR\fR
 .ad
 .RS 17n
-.rt  
 Cancels the resync that is in progress on the specified metadevice. The resync
 will be stopped at its current point and can be resumed by running the
 "\fBmetasync metadevice\fR" command. This option only applies to RAID1 volumes.
@@ -66,34 +64,28 @@ will be stopped at its current point and can be resumed by running the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 17n
-.rt  
 Displays usage message.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fImetadevice\fR\fR
 .ad
 .RS 17n
-.rt  
 Regenerates parity information for RAID5 metadevices.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fB\fIsetname\fR\fR\fR
 .ad
 .RS 17n
-.rt  
 Specifies the name of the diskset on which \fBmetasync\fR will work. Using the
 \fB-s\fR option will cause the command to perform its administrative function
 within the specified diskset. Without this option, the command will perform its
@@ -102,12 +94,10 @@ function on local metadevices.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 17n
-.rt  
 Specifies that the \fBmetasync\fR command handle special resync requirements
 during a system reboot. \fBmetasync\fR \fB-r\fR should only be invoked from the
 \fBsvc:/system/mdmonitor\fR service. The \fBmetasync\fR command only resyncs
@@ -130,12 +120,10 @@ so that resyncs occur as quickly as possible.
 .SH OPERANDS
 .sp
 .ne 2
-.mk
 .na
 \fB\fIbuffer_size\fR\fR
 .ad
 .RS 15n
-.rt  
 Specifies the size (number of 512-byte disk blocks) of the internal copy buffer
 for the mirror resync. The size defaults to 1024 512-byte disk blocks. It can
 be no more than 2048 blocks. For best performance (quickest completion of the
@@ -148,23 +136,19 @@ resync), 2048 blocks is the recommended size.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
diff --git a/usr/src/man/man1m/metattach.1m b/usr/src/man/man1m/metattach.1m
index 529b1c37f1..4e6246af70 100644
--- a/usr/src/man/man1m/metattach.1m
+++ b/usr/src/man/man1m/metattach.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH metattach 1M "20 Jun 2006" "SunOS 5.11" "System Administration Commands"
+.TH METATTACH 1M "Jun 20, 2006"
 .SH NAME
 metattach, metadetach \- attach or detach a metadevice
 .SH SYNOPSIS
@@ -105,12 +105,10 @@ Root privileges are required for all of the following options except \fB-h\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR \fIalignment\fR\fR
 .ad
 .RS 16n
-.rt  
 Set the value of the soft partition extent alignment. Use this option when it
 is important specify a starting offset for the soft partition. It preserves the
 data alignment between the metadevice address space and the address space of
@@ -126,12 +124,10 @@ and affecting performance.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 16n
-.rt  
 Force the detaching of metadevices that have components that need maintenance
 or are busy. You can use this option only when a mirror is in a maintenance
 state that can be fixed with \fBmetareplace\fR(1M). If the mirror is in a
@@ -142,23 +138,19 @@ because the mirrors must be resynchronized before one of them can be detached.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 16n
-.rt  
 Display a usage message.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIinterlace\fR\fR
 .ad
 .RS 16n
-.rt  
 Specify the interlace value for stripes, where \fBsize\fR is a specified value
 followed by either \fBk\fR for kilobytes, \fBm\fR for megabytes, or \fBb\fR for
 blocks. The units can be either uppercase or lowercase. If \fIsize\fR is not
@@ -169,12 +161,10 @@ forward on all stripes that follow.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsetname\fR\fR
 .ad
 .RS 16n
-.rt  
 Specify the name of the diskset on which the \fBmetattach\fR command or the
 \fBmetadetach\fR command works.. Using the \fB-s\fR option causes the command
 to perform its administrative function within the specified diskset. Without
@@ -187,12 +177,10 @@ this option, the command performs its function on local metadevices.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcomponent\fR\fR
 .ad
 .RS 17n
-.rt  
 The logical name for the physical slice (partition) on a disk drive, such as
 \fB/dev/dsk/c0t0d0s2\fR, being added to the concatenation, stripe,
 concatenation of stripes, or RAID5 metadevice.
@@ -200,69 +188,57 @@ concatenation of stripes, or RAID5 metadevice.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIconcat/stripe\fR\fR
 .ad
 .RS 17n
-.rt  
 The metadevice name of the concatenation, stripe, or concatenation of stripes.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIlog\fR\fR
 .ad
 .RS 17n
-.rt  
 The metadevice name of the logging device to be attached to the trans
 metadevice.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fImetadevice\fR\fR
 .ad
 .RS 17n
-.rt  
 The metadevice name to be attached to the mirror as a submirror. This
 metadevice must have been previously created by the \fBmetainit\fR command.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fImirror\fR\fR
 .ad
 .RS 17n
-.rt  
 The name of the mirror.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIRAID\fR\fR
 .ad
 .RS 17n
-.rt  
 The metadevice name of the RAID5 metadevice.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsize\fR | \fIall\fR\fR
 .ad
 .RS 17n
-.rt  
 The amount of space to add to the soft partition in \fBK\fR or \fBk\fR for
 kilobytes, \fBM\fR or \fBm\fR for megabytes, \fBG\fR or \fBg\fR for gigabytes,
 \fBT\fR or \fBt\fR for terabytes, and \fBB\fR or \fBb\fR for blocks (sectors).
@@ -274,34 +250,28 @@ underlying volume.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsoftpart\fR\fR
 .ad
 .RS 17n
-.rt  
 The metadevice name of the existing soft partition.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsubmirror\fR\fR
 .ad
 .RS 17n
-.rt  
 The metadevice name of the submirror to be detached from the mirror.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fItrans\fR\fR
 .ad
 .RS 17n
-.rt  
 The metadevice name of the trans metadevice (not the master or logging device).
 .RE
 
@@ -473,23 +443,19 @@ the soft partition is expanded.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -501,13 +467,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/mkbootmedia.1m b/usr/src/man/man1m/mkbootmedia.1m
index bde48cc5c8..fb78f74a4c 100644
--- a/usr/src/man/man1m/mkbootmedia.1m
+++ b/usr/src/man/man1m/mkbootmedia.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mkbootmedia 1M "23 Sep 2009" "SunOS 5.11" "System Administration Commands"
+.TH MKBOOTMEDIA 1M "Sep 23, 2009"
 .SH NAME
 mkbootmedia \- create bootable Solaris ISO image
 .SH SYNOPSIS
@@ -35,7 +35,6 @@ writable. If necessary, first save a copy prior to running this utility.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlabel\fR\fR
 .ad
@@ -46,7 +45,6 @@ Sets \fIlabel\fR as the label/volume name of the ISO image.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -61,7 +59,6 @@ Verbose. Multiple \fB-v\fR options increase verbosity.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fImedia-root\fR\fR
 .ad
@@ -72,7 +69,6 @@ Top-level directory of an on-disk Solaris install media.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIiso\fR\fR
 .ad
@@ -106,13 +102,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/mkdevalloc.1m b/usr/src/man/man1m/mkdevalloc.1m
index 4140fdf0e2..7739ddd0a7 100644
--- a/usr/src/man/man1m/mkdevalloc.1m
+++ b/usr/src/man/man1m/mkdevalloc.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mkdevalloc 1M "8 Oct 2003" "SunOS 5.11" "System Administration Commands"
+.TH MKDEVALLOC 1M "Oct 8, 2003"
 .SH NAME
 mkdevalloc \- Make device_allocate entries
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/mkdevalloc\fR 
+\fB/usr/sbin/mkdevalloc\fR
 .fi
 
 .SH DESCRIPTION
@@ -67,13 +67,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityObsolete
+Interface Stability	Obsolete
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/mkdevmaps.1m b/usr/src/man/man1m/mkdevmaps.1m
index 1024d7a0c1..de8687919a 100644
--- a/usr/src/man/man1m/mkdevmaps.1m
+++ b/usr/src/man/man1m/mkdevmaps.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mkdevmaps 1M "8 Oct 2003" "SunOS 5.11" "System Administration Commands"
+.TH MKDEVMAPS 1M "Oct 8, 2003"
 .SH NAME
 mkdevmaps \- make device_maps entries
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/mkdevmaps\fR 
+\fB/usr/sbin/mkdevmaps\fR
 .fi
 
 .SH DESCRIPTION
@@ -46,13 +46,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityObsolete
+Interface Stability	Obsolete
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/mkfifo.1m b/usr/src/man/man1m/mkfifo.1m
index 725d687ffe..93d47e6705 100644
--- a/usr/src/man/man1m/mkfifo.1m
+++ b/usr/src/man/man1m/mkfifo.1m
@@ -10,7 +10,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mkfifo 1M "11 Aug 2009" "SunOS 5.11" "System Administration Commands"
+.TH MKFIFO 1M "Aug 11, 2009"
 .SH NAME
 mkfifo \- make FIFO special file
 .SH SYNOPSIS
@@ -56,12 +56,10 @@ of the created FIFO is \fBa=rw\fR minus the bits set in \fBumask\fR(1).
 The following option is supported for \fB/usr/bin/mkfifo\fR:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fImode\fR\fR
 .ad
 .RS 11n
-.rt  
 Set the file permission bits of the newly-created \fBFIFO\fR to the specified
 \fImode\fR value. The \fImode\fR option-argument will be the same as the
 \fImode\fR operand defined for the \fBchmod\fR(1) command. In
@@ -75,7 +73,6 @@ will be interpreted relative to an assumed initial mode of \fBa=rw\fR.
 The following option is supported for \fBksh93\fR:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fImode\fR\fR
 .ad
@@ -84,7 +81,6 @@ The following option is supported for \fBksh93\fR:
 \fB\fB--mode=\fR\fImode\fR\fR
 .ad
 .RS 15n
-.rt  
 Set the mode of the created FIFO to \fImode\fR. The \fImode\fR option-argument
 is a symbolic or octal mode as in \fBchmod\fR(1). Relative modes assume an
 initial mode of \fBa=rw\fR.
@@ -96,12 +92,10 @@ initial mode of \fBa=rw\fR.
 The following operand is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfile\fR\fR
 .ad
 .RS 8n
-.rt  
 A path name of the \fBFIFO\fR special file to be created.
 .RE
 
@@ -122,23 +116,19 @@ that affect the execution of \fBmkfifo\fR: \fBLANG\fR, \fBLC_ALL\fR,
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 All the specified \fBFIFO\fR special files were created successfully.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -150,13 +140,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStandard
+Interface Stability	Standard
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/mkfile.1m b/usr/src/man/man1m/mkfile.1m
index ab5ede8d97..227c3db2a5 100644
--- a/usr/src/man/man1m/mkfile.1m
+++ b/usr/src/man/man1m/mkfile.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mkfile 1M "20 Feb 2008" "SunOS 5.11" "System Administration Commands"
+.TH MKFILE 1M "Feb 20, 2008"
 .SH NAME
 mkfile \- create a file
 .SH SYNOPSIS
@@ -25,12 +25,10 @@ it can be flagged as gigabytes, kilobytes, blocks, or megabytes, with the
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 6n
-.rt  
 Create an empty \fIfilename\fR. The size is noted, but disk blocks are not
 allocated until data is written to them. Files created with this option cannot
 be swapped over local UFS mounts.
@@ -38,12 +36,10 @@ be swapped over local UFS mounts.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 Verbose.  Report the names and sizes of created files.
 .RE
 
@@ -53,23 +49,19 @@ Verbose.  Report the names and sizes of created files.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Success.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -86,13 +78,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/mkfs.1m b/usr/src/man/man1m/mkfs.1m
index a5de81ea1f..586378219e 100644
--- a/usr/src/man/man1m/mkfs.1m
+++ b/usr/src/man/man1m/mkfs.1m
@@ -3,14 +3,14 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mkfs 1M "17 Nov 2000" "SunOS 5.11" "System Administration Commands"
+.TH MKFS 1M "Nov 17, 2000"
 .SH NAME
 mkfs \- construct a file system
 .SH SYNOPSIS
 .LP
 .nf
-\fBmkfs\fR [\fB-F\fR \fIFSType\fR] [\fIgeneric_options\fR] 
-     [\fB-o\fR \fIFSType-specific_options\fR] \fIraw_device_file\fR 
+\fBmkfs\fR [\fB-F\fR \fIFSType\fR] [\fIgeneric_options\fR]
+     [\fB-o\fR \fIFSType-specific_options\fR] \fIraw_device_file\fR
      [\fIoperands\fR]
 .fi
 
@@ -40,12 +40,10 @@ following the  \fIspecific_options\fR (if any). \fIoperands\fR are
 The following are the generic options for \fBmkfs\fR:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fR
 .ad
 .RS 6n
-.rt  
 Specify the  \fIFSType\fR to be constructed. If  \fB-F\fR is not specified, the
 \fIFSType\fR is determined from  \fB/etc/vfstab\fR by matching the
 \fIraw_device_file\fR with a  \fBvfstab\fR entry, or by consulting the
@@ -54,12 +52,10 @@ Specify the  \fIFSType\fR to be constructed. If  \fB-F\fR is not specified, the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
 .RS 6n
-.rt  
 Echo the complete command line, but do not execute the command. The command
 line is generated by using the options and arguments provided and adding to
 them information derived from  \fB/etc/vfstab\fR or  \fB/etc/default/fs\fR.
@@ -68,12 +64,10 @@ This option may be used to verify and validate the command line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
 .RS 6n
-.rt  
 Return the command line which was used to create the file system. The file
 system must already exist. This option provides a means of determining the
 command used in constructing the file system.
@@ -81,12 +75,10 @@ command used in constructing the file system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 6n
-.rt  
 Specify  \fIFSType\fR-specific options. See the manual page for the  \fBmkfs\fR
 module specific to the file system type.
 .RE
@@ -99,22 +91,18 @@ encountering files greater than or equal to 2 Gbyte ( 2^31 bytes).
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/fs\fR\fR
 .ad
 .RS 19n
-.rt  
 Default file system type. Default values can be set for the following flags in
 \fB/etc/default/fs\fR. For example: \fBLOCAL=ufs\fR
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLOCAL\fR\fR
 .ad
 .RS 9n
-.rt  
 The default partition for a command if no \fIFSType\fR is specified.
 .RE
 
@@ -122,12 +110,10 @@ The default partition for a command if no \fIFSType\fR is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vfstab\fR\fR
 .ad
 .RS 19n
-.rt  
 List of default parameters for each file system
 .RE
 
diff --git a/usr/src/man/man1m/mkfs_pcfs.1m b/usr/src/man/man1m/mkfs_pcfs.1m
index d65fc5349a..7a82df10c7 100644
--- a/usr/src/man/man1m/mkfs_pcfs.1m
+++ b/usr/src/man/man1m/mkfs_pcfs.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mkfs_pcfs 1M "1 Dec 2003" "SunOS 5.11" "System Administration Commands"
+.TH MKFS_PCFS 1M "Dec 1, 2003"
 .SH NAME
 mkfs_pcfs \- construct a FAT file system
 .SH SYNOPSIS
@@ -54,35 +54,29 @@ See \fBmkfs\fR(1M) for the list of supported generic options.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIFSType_specific_options\fR\fR
 .ad
 .RS 30n
-.rt  
 Specify \fBpcfs\fR file system-specific options in a comma-separated list with
 no intervening spaces. If invalid options are specified, a warning message is
 printed and the invalid options are ignored.
 .sp
 .ne 2
-.mk
 .na
 \fBb=\fIlabel\fR\fR
 .ad
 .RS 14n
-.rt  
 Label the media with volume label. The volume label is restricted to 11
 uppercase characters.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBB=\fIfilename\fR\fR
 .ad
 .RS 14n
-.rt  
 Install \fIfilename\fR as the boot loader in the file system's boot sector. If
 you don't specify a boot loader, an \fBMS-DOS\fR boot loader is installed. The
 \fBMS-DOS\fR boot loader requires specific \fBMS-DOS\fR system files to make
@@ -91,36 +85,30 @@ the diskette bootable. See \fBNOTES\fR for more information.
 
 .sp
 .ne 2
-.mk
 .na
 \fBfat=\fIn\fR\fR
 .ad
 .RS 14n
-.rt  
 The size of a \fBFAT\fR entry. Currently, 12, 16, and 32 are valid values. The
 default is 12 for diskettes, 16 for larger media.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBh\fR
 .ad
 .RS 14n
-.rt  
 Mark the first file installed as a hidden file. The \fB-i\fR option must also
 be specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBhidden=\fIn\fR\fR
 .ad
 .RS 14n
-.rt  
 Set the number of hidden sectors to \fIn\fR. This is the number of sectors on
 the physical disk preceding the start of the volume (which is the boot sector
 itself). This defaults to 0 for diskettes or a computed valued (based on the
@@ -130,12 +118,10 @@ fdisk table) for disks. This option may be used only in conjunction with the
 
 .sp
 .ne 2
-.mk
 .na
 \fBi=\fIfilename\fR\fR
 .ad
 .RS 14n
-.rt  
 Install \fIfilename\fR as the initial file in the new file system. The initial
 file's contents are guaranteed to occupy consecutive clusters at the start of
 the files area. When creating bootable media, a boot program should be
@@ -144,12 +130,10 @@ specified as the initial file.
 
 .sp
 .ne 2
-.mk
 .na
 \fBnofdisk\fR
 .ad
 .RS 14n
-.rt  
 Do not attempt to find an \fBfdisk\fR table on the medium. Instead rely on the
 \fBsize\fR option for determining the partition size. By default, the created
 \fBFAT\fR is 16 bits and begins at the first sector of the device. This
@@ -158,12 +142,10 @@ origination sector can be modified with the hidden option (\fB-h\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fBnsect=\fIn\fR\fR
 .ad
 .RS 14n
-.rt  
 The number of sectors per track on the disk. If not specified, the value is
 determined by using a \fBdkio\fR(7I) ioctl to get the disk geometry, or (for
 diskette) from the results of an \fBFDIOGCHAR\fR ioctl.
@@ -171,12 +153,10 @@ diskette) from the results of an \fBFDIOGCHAR\fR ioctl.
 
 .sp
 .ne 2
-.mk
 .na
 \fBntrack=\fIn\fR\fR
 .ad
 .RS 14n
-.rt  
 The number of tracks per cylinder on the disk. If not specified, the value is
 determined by using a \fBdkio\fR(7I) ioctl to get the disk geometry, or (for
 diskette) from the results of an \fBFDIOGCHAR\fR ioctl.
@@ -184,12 +164,10 @@ diskette) from the results of an \fBFDIOGCHAR\fR ioctl.
 
 .sp
 .ne 2
-.mk
 .na
 \fBN\fR
 .ad
 .RS 14n
-.rt  
 No execution mode. Print normal output, but do not actually write the file
 system to the medium. This is most useful when used in conjunction with the
 verbose option.
@@ -197,24 +175,20 @@ verbose option.
 
 .sp
 .ne 2
-.mk
 .na
 \fBr\fR
 .ad
 .RS 14n
-.rt  
 Mark the first file installed as read-only. The \fB-i\fR option must also be
 specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBreserve=\fIn\fR\fR
 .ad
 .RS 14n
-.rt  
 Set the number of reserved sectors to \fIn\fR. This is the number of sectors in
 the volume, preceding the start of the first \fBFAT\fR, including the boot
 sector. The value should always be at least 1, and the default value is exactly
@@ -223,24 +197,20 @@ sector. The value should always be at least 1, and the default value is exactly
 
 .sp
 .ne 2
-.mk
 .na
 \fBs\fR
 .ad
 .RS 14n
-.rt  
 Mark the first file installed as a system file. The \fB-i\fR option must also
 be specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBsize=\fIn\fR\fR
 .ad
 .RS 14n
-.rt  
 The number of sectors in the file system. If not specified, the value is
 determined from the size of the partition given in the fdisk table or (for
 diskette) by way of computation using the \fBFDIOGCHAR\fR ioctl.
@@ -248,12 +218,10 @@ diskette) by way of computation using the \fBFDIOGCHAR\fR ioctl.
 
 .sp
 .ne 2
-.mk
 .na
 \fBspc=\fIn\fR\fR
 .ad
 .RS 14n
-.rt  
 The size of the allocation unit for space within the file system, expressed as
 a number of sectors. The default value depends on the \fBFAT\fR entry size and
 the size of the file system.
@@ -261,12 +229,10 @@ the size of the file system.
 
 .sp
 .ne 2
-.mk
 .na
 \fBv\fR
 .ad
 .RS 14n
-.rt  
 Verbose output. Describe, in detail, operations being performed.
 .RE
 
@@ -275,12 +241,10 @@ Verbose output. Describe, in detail, operations being performed.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fIraw_device_file\fR\fR
 .ad
 .RS 19n
-.rt  
 The device on which to build the \fBFAT\fR. The device name for a diskette must
 be specified as \fB/dev/rdiskette0\fR for the first diskette drive, or
 \fB/dev/rdiskette1\fR for a second diskette drive. For non-diskette media, a
@@ -366,13 +330,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/mkfs_udfs.1m b/usr/src/man/man1m/mkfs_udfs.1m
index 5eacf257c2..26184440c1 100644
--- a/usr/src/man/man1m/mkfs_udfs.1m
+++ b/usr/src/man/man1m/mkfs_udfs.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mkfs_udfs 1M "17 Nov 2000" "SunOS 5.11" "System Administration Commands"
+.TH MKFS_UDFS 1M "Nov 17, 2000"
 .SH NAME
 mkfs_udfs \- construct a udfs file system
 .SH SYNOPSIS
 .LP
 .nf
-\fBmkfs\fR \fB-F udfs\fR [\fIgeneric_options\fR] [\fB-o\fR \fIspecific_options\fR] \fIraw_device_file\fR 
+\fBmkfs\fR \fB-F udfs\fR [\fIgeneric_options\fR] [\fB-o\fR \fIspecific_options\fR] \fIraw_device_file\fR
      [\fIsize\fR]
 .fi
 
@@ -28,12 +28,10 @@ See \fBmkfs\fR(1M) for the list of supported \fIgeneric_options\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIspecific_options\fR\fR
 .ad
 .RS 23n
-.rt  
 Specify a \fBudfs\fR-specific option. Specify \fBudfs\fR file system specific
 options in a comma-separated list with no intervening spaces. If invalid
 options are specified, a warning message is printed and the invalid options are
@@ -42,23 +40,19 @@ ignored.
 The following \fIspecific_options\fR are available:
 .sp
 .ne 2
-.mk
 .na
 \fBN\fR
 .ad
 .RS 16n
-.rt  
 Print the file system parameters without actually creating the file system.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBlabel=\fIstring\fR\fR
 .ad
 .RS 16n
-.rt  
 Specify the label to be written into the volume header structures. Specify
 \fIstring\fR as the name of the label. If \fIstring\fR is not specified, a
 default \fIstring\fR is generated in the form of \fB*NoLabel*\fR.
@@ -72,23 +66,19 @@ default \fIstring\fR is generated in the form of \fB*NoLabel*\fR.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIraw_device_file\fR\fR
 .ad
 .RS 19n
-.rt  
  Specify the disk partition on which to write.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsize\fR\fR
 .ad
 .RS 19n
-.rt  
 Specify the number of 512-byte blocks in the file system.
 .RE
 
@@ -157,7 +147,7 @@ Sector size given is not in the valid range.
 .in +2
 .nf
 Volume integrity sequence descriptors too long
-File set descriptor too long. 
+File set descriptor too long.
 .fi
 .in -2
 .sp
diff --git a/usr/src/man/man1m/mkfs_ufs.1m b/usr/src/man/man1m/mkfs_ufs.1m
index f2d77a3778..9c10e6bcb5 100644
--- a/usr/src/man/man1m/mkfs_ufs.1m
+++ b/usr/src/man/man1m/mkfs_ufs.1m
@@ -4,13 +4,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mkfs_ufs 1M "8 Mar 2006" "SunOS 5.11" "System Administration Commands"
+.TH MKFS_UFS 1M "Mar 8, 2006"
 .SH NAME
 mkfs_ufs \- construct a UFS file system
 .SH SYNOPSIS
 .LP
 .nf
-\fBmkfs\fR \fB-F\fR ufs [\fIgeneric_options\fR] [\fB-o\fR \fIFSType_specific_options\fR] \fIraw_device_file\fR 
+\fBmkfs\fR \fB-F\fR ufs [\fIgeneric_options\fR] [\fB-o\fR \fIFSType_specific_options\fR] \fIraw_device_file\fR
      [\fIsize\fR]
 .fi
 
@@ -42,23 +42,19 @@ and is required (even with \fB\fR\fB-o\fR\fB N\fR), unless the \fB-V\fR or
 The following generic options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
 .RS 6n
-.rt  
 Print the command line that was used to create the existing file system.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
 .RS 6n
-.rt  
 Print the current \fBmkfs\fR command line.
 .RE
 
@@ -68,22 +64,18 @@ Print the current \fBmkfs\fR command line.
 The following UFS-specific options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 6n
-.rt  
 Use one or more of the following values separated by commas (with no
 intervening spaces) to specify UFS-specific options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBapc=\fR\fIn\fR\fR
 .ad
 .RS 15n
-.rt  
 The number of alternate sectors per cylinder to reserve for bad block
 replacement for SCSI devices only. The default is \fB0\fR.
 .sp
@@ -92,12 +84,10 @@ This option is not applicable for disks with EFI labels and is ignored.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbsize=\fR\fIn\fR\fR
 .ad
 .RS 15n
-.rt  
 The logical block size of the file system in bytes, either \fB4096\fR or
 \fB8192\fR. The default is \fB8192\fR. The sun4u architecture does not support
 the \fB4096\fR block size.
@@ -105,12 +95,10 @@ the \fB4096\fR block size.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcalcbinsb\fR\fR
 .ad
 .RS 15n
-.rt  
 Sends to stdout a binary (machine-readable) version of the superblock that
 would be used to create a file system with the specified configuration
 parameters.
@@ -118,24 +106,20 @@ parameters.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcalcsb\fR\fR
 .ad
 .RS 15n
-.rt  
 Sends to stdout a human-readable version of the superblock that would be used
 to create a file system with the specified configuration parameters.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcgsize=\fR\fIn\fR\fR
 .ad
 .RS 15n
-.rt  
 The number of cylinders per cylinder group, ranging from \fB16\fR to \fB256\fR.
 The default is calculated by dividing the number of sectors in the file system
 by the number of sectors in a gigabyte. Then, the result is multiplied by
@@ -148,12 +132,10 @@ requested, it is changed by the minimum amount necessary.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfragsize=\fR\fIn\fR\fR
 .ad
 .RS 15n
-.rt  
 The smallest amount of disk space in bytes that can be allocated to a file.
 \fBfragsize\fR must be a power of 2 divisor of \fBbsize\fR, where:
 .sp
@@ -170,12 +152,10 @@ For file systems greater than 1 terabyte or for file systems created with the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfree=\fR\fIn\fR\fR
 .ad
 .RS 15n
-.rt  
 The minimum percentage of free space to maintain in the file system between 0%
 and 99%, inclusively. This space is off-limits to users. Once the file system
 is filled to this threshold, only the superuser can continue writing to the
@@ -189,24 +169,20 @@ This parameter can be subsequently changed using the \fBtunefs\fR(1M) command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgap=\fR\fIn\fR\fR
 .ad
 .RS 15n
-.rt  
 Rotational delay. This option is obsolete in the Solaris 10 release. The value
 is always set to \fB0\fR, regardless of the input value.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmaxcontig=\fR\fIn\fR\fR
 .ad
 .RS 15n
-.rt  
 The maximum number of logical blocks, belonging to one file, that are allocated
 contiguously. The default is calculated as follows:
 .sp
@@ -234,12 +210,10 @@ You can subsequently change this parameter by using \fBtunefs\fR(1M).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmtb=y\fR\fR
 .ad
 .RS 15n
-.rt  
 Set the parameters of the file system to allow eventual growth to over a
 terabyte in total file system size. This option sets \fIfragsize\fR to be the
 same as \fIbsize\fR, and sets \fInbpi\fR to 1 Mbyte, unless the \fB-i\fR option
@@ -250,24 +224,20 @@ user-supplied value of \fIfragsize\fR or \fInbpi\fR is ignored.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBN\fR\fR
 .ad
 .RS 15n
-.rt  
 Print out the file system parameters that would be used to create the file
 system without actually creating the file system.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnbpi=\fR\fIn\fR\fR
 .ad
 .RS 15n
-.rt  
 The number of bytes per inode, which specifies the density of inodes in the
 file system. The number is divided into the total size of the file system to
 determine the number of inodes to create.
@@ -282,12 +252,10 @@ The number of inodes can increase if the file system is expanded with the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnrpos=\fR\fIn\fR\fR
 .ad
 .RS 15n
-.rt  
 The number of different rotational positions in which to divide a cylinder
 group. The default is \fB8\fR.
 .sp
@@ -296,23 +264,19 @@ This option is not applicable for disks with EFI labels and is ignored.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnsect=\fR\fIn\fR\fR
 .ad
 .RS 15n
-.rt  
 The number of sectors per track on the disk. The default is \fB32\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBntrack=\fR\fIn\fR\fR
 .ad
 .RS 15n
-.rt  
 The number of tracks per cylinder on the disk. The default is \fB16\fR.
 .sp
 This option is not applicable for disks with EFI labels and is ignored.
@@ -320,12 +284,10 @@ This option is not applicable for disks with EFI labels and is ignored.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBopt=\fR\fIs\fR\||\|\fIt\fR\fR
 .ad
 .RS 15n
-.rt  
 The file system can either be instructed to try to minimize the \fBtime\fR
 spent allocating blocks, or to try to minimize the \fBspace\fR fragmentation on
 the disk. The default is \fItime\fR.
@@ -335,12 +297,10 @@ This parameter can be subsequently changed with the \fBtunefs\fR(1M) command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrps=\fR\fIn\fR\fR
 .ad
 .RS 15n
-.rt  
 The rotational speed of the disk, in revolutions per second. The default is
 \fB60\fR.
 .sp
@@ -361,12 +321,10 @@ option is omitted and the list follows the size operand. This is the way
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIraw_device_file\fR\fR
 .ad
 .RS 19n
-.rt  
 The disk partition on which to write.
 .RE
 
@@ -386,8 +344,8 @@ warning that performance might be impaired can be safely ignored.
 .sp
 .in +2
 .nf
-Warning: insufficient space in super block for 
-rotational layout tables with nsect \fIsblock.fs_nsect\fR 
+Warning: insufficient space in super block for
+rotational layout tables with nsect \fIsblock.fs_nsect\fR
 and ntrak \fIsblock.fs_ntrak\fR. (File system performance may be impaired.)
 .fi
 .in -2
diff --git a/usr/src/man/man1m/mknod.1m b/usr/src/man/man1m/mknod.1m
index f415600186..79111ed71e 100644
--- a/usr/src/man/man1m/mknod.1m
+++ b/usr/src/man/man1m/mknod.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mknod 1M "16 Sep 1996" "SunOS 5.11" "System Administration Commands"
+.TH MKNOD 1M "Sep 16, 1996"
 .SH NAME
 mknod \- make a special file
 .SH SYNOPSIS
@@ -32,34 +32,28 @@ mknod \- make a special file
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBb\fR\fR
 .ad
 .RS 5n
-.rt  
 Create a block-type special file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBc\fR\fR
 .ad
 .RS 5n
-.rt  
 Create a character-type special file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBp\fR\fR
 .ad
 .RS 5n
-.rt  
 Create a FIFO (named pipe).
 .RE
 
@@ -69,23 +63,19 @@ Create a FIFO (named pipe).
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fImajor\fR\fR
 .ad
 .RS 9n
-.rt  
 The \fImajor\fR device number.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIminor\fR\fR
 .ad
 .RS 9n
-.rt  
 The \fIminor\fR device number; can be either decimal or octal. The assignment
 of major device numbers is specific to each system. You must be the super-user
 to use this form of the command.
@@ -93,12 +83,10 @@ to use this form of the command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIname\fR\fR
 .ad
 .RS 9n
-.rt  
 A special file to be created.
 .RE
 
diff --git a/usr/src/man/man1m/mkntfs.1m b/usr/src/man/man1m/mkntfs.1m
index f1f1088a98..98921794ca 100644
--- a/usr/src/man/man1m/mkntfs.1m
+++ b/usr/src/man/man1m/mkntfs.1m
@@ -7,7 +7,7 @@
 .\" This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation ; either version 2 of the License, or (at your option) any later version.  This program is distributed
 .\" in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.  You should have received a copy of the GNU General Public License along with this program
 .\" (in the main directory of the Linux-NTFS distribution in the file COPYING);  if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 11-1307 USA
-.TH mkntfs 1M "27 May 2009" "SunOS 5.11" "System Administration Commands"
+.TH MKNTFS 1M "May 27, 2009"
 .SH NAME
 mkntfs \- create an NTFS file system
 .SH SYNOPSIS
@@ -46,7 +46,6 @@ below.
 .SS "Basic Options"
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR, \fB--enable-compression\fR\fR
 .ad
@@ -57,7 +56,6 @@ Enable compression on the volume.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR, \fB--fast\fR or \fB-q\fR, \fB--quick\fR\fR
 .ad
@@ -69,7 +67,6 @@ bad sector checking.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR, \fB--label\fR \fIstring\fR\fR
 .ad
@@ -80,7 +77,6 @@ Set the volume label for the filesystem to \fIstring\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR, \fB--no-action\fR\fR
 .ad
@@ -94,7 +90,6 @@ out except the actual writing to the device.
 .SS "Advanced Options"
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR, \fB--cluster-size\fR \fIbytes\fR\fR
 .ad
@@ -113,7 +108,6 @@ Windows.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR, \fB--force\fR\fR
 .ad
@@ -125,7 +119,6 @@ device, or appears to be mounted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-H\fR, \fB--heads\fR \fInum\fR\fR
 .ad
@@ -139,7 +132,6 @@ Windows to be able to boot from the created volume.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR, \fB--no-indexing\fR\fR
 .ad
@@ -152,7 +144,6 @@ implement content indexing.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR, \fB--partition-start\fR \fIsector\fR\fR
 .ad
@@ -166,7 +157,6 @@ for Windows to be able to boot from the created volume.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR, \fB--sectors-per-track\fR \fInum\fR\fR
 .ad
@@ -181,7 +171,6 @@ volume.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR, \fB--sector-size\fR \fIbytes\fR\fR
 .ad
@@ -195,7 +184,6 @@ used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR, \fB--zero-time\fR\fR
 .ad
@@ -207,7 +195,6 @@ time. This can be useful for debugging purposes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-z\fR, \fB--mft-zone-multiplier\fR \fInum\fR\fR
 .ad
@@ -240,7 +227,6 @@ multiplier      (% of volume size)
 .SS "Output Options"
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--debug\fR\fR
 .ad
@@ -252,7 +238,6 @@ output useful for debugging \fBmkntfs\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR, \fB--quiet\fR\fR
 .ad
@@ -264,7 +249,6 @@ all. Useful if \fBmkntfs\fR is run in a script.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR, \fB--verbose\fR\fR
 .ad
@@ -276,7 +260,6 @@ Verbose execution.
 .SS "Help Options"
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR, \fB--help\fR\fR
 .ad
@@ -287,7 +270,6 @@ Show a list of options with a brief description of each one.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR, \fB--license\fR\fR
 .ad
@@ -298,7 +280,6 @@ Display the \fBmkntfs\fR licensing information and exit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR, \fB--version\fR\fR
 .ad
@@ -315,13 +296,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/mkpwdict.1m b/usr/src/man/man1m/mkpwdict.1m
index d070a98647..8b896093b5 100644
--- a/usr/src/man/man1m/mkpwdict.1m
+++ b/usr/src/man/man1m/mkpwdict.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mkpwdict 1M "1 Jun 2004" "SunOS 5.11" "System Administration Commands"
+.TH MKPWDICT 1M "Jun 1, 2004"
 .SH NAME
 mkpwdict \- maintain password-strength checking database
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/mkpwdict\fR [\fB-s\fR \fIdict1\fR,... ,\fIdictN\fR] 
+\fB/usr/sbin/mkpwdict\fR [\fB-s\fR \fIdict1\fR,... ,\fIdictN\fR]
      [\fB-d\fR \fIdestination-path\fR]
 .fi
 
@@ -39,47 +39,39 @@ location is \fB/var/passwd\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 6n
-.rt  
 Specifies a comma-separated list of files containing words to be added to the
 dictionary-lookup database.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 6n
-.rt  
 Specifies the target location of the dictionary-database.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/passwd\fR\fR
 .ad
 .RS 23n
-.rt  
 See \fBpasswd\fR(1).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/passwd\fR\fR
 .ad
 .RS 23n
-.rt  
 default destination directory
 .RE
 
@@ -91,13 +83,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/modinfo.1m b/usr/src/man/man1m/modinfo.1m
index f683c603c2..c4c31d8ef0 100644
--- a/usr/src/man/man1m/modinfo.1m
+++ b/usr/src/man/man1m/modinfo.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH modinfo 1M "1 Oct 2002" "SunOS 5.11" "System Administration Commands"
+.TH MODINFO 1M "Oct 1, 2002"
 .SH NAME
 modinfo \- display information about loaded kernel modules
 .SH SYNOPSIS
@@ -42,35 +42,29 @@ module types.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 16n
-.rt  
 Display the number of instances of the module loaded and the module's current
 state.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fI module-id\fR\fR
 .ad
 .RS 16n
-.rt  
 Display information about this module only.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR\fR
 .ad
 .RS 16n
-.rt  
 Do not truncate module information at \fB80\fR characters.
 .RE
 
@@ -111,7 +105,7 @@ Id Loadaddr   Size Info Rev Module Name
  9  ff080978   c640   -   1  rpcmod (rpc interface str mod)
 10  ff08cfb8  2031c   -   1  ip (IP Streams module)
 10  ff08cfb8  2031c   2   1  ip (IP Streams device)
- 
+
 .fi
 .in -2
 .sp
@@ -151,13 +145,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/modload.1m b/usr/src/man/man1m/modload.1m
index 68855b62c4..c54e0b4550 100644
--- a/usr/src/man/man1m/modload.1m
+++ b/usr/src/man/man1m/modload.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH modload 1M "1 Dec 1993" "SunOS 5.11" "System Administration Commands"
+.TH MODLOAD 1M "Dec 1, 1993"
 .SH NAME
 modload \- load a kernel module
 .SH SYNOPSIS
@@ -59,12 +59,10 @@ example# \fBmodload -p drv/foo\fR
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fI exec_file\fR\fR
 .ad
 .RS 16n
-.rt  
 Specify the name of a shell script or  executable image file that is executed
 after the module is successfully loaded.  The first argument passed is the
 module ID (in decimal). The other argument is module specific. The module
@@ -75,12 +73,10 @@ into the appropriate kernel table. See  \fBmodinfo\fR(1M)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 16n
-.rt  
 Use the kernel's internal modpath variable as the search path for the module.
 .RE
 
diff --git a/usr/src/man/man1m/modunload.1m b/usr/src/man/man1m/modunload.1m
index 0700a369b8..be46776171 100644
--- a/usr/src/man/man1m/modunload.1m
+++ b/usr/src/man/man1m/modunload.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH modunload 1M "19 Nov 2001" "SunOS 5.11" "System Administration Commands"
+.TH MODUNLOAD 1M "Nov 19, 2001"
 .SH NAME
 modunload \- unload a module
 .SH SYNOPSIS
@@ -25,12 +25,10 @@ unloaded. Modules loaded by \fBmodload\fR(1M) are not affected.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIexec_file\fR\fR
 .ad
 .RS 16n
-.rt  
 Specify the name of a shell script or executable image file to be executed
 before the module is unloaded. The first argument passed is the module id (in
 decimal). There are two additional arguments that are module specific. For
@@ -46,12 +44,10 @@ apply.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fImodule_id\fR\fR
 .ad
 .RS 16n
-.rt  
 Specify the module to be unloaded.
 .RE
 
diff --git a/usr/src/man/man1m/monitor.1m b/usr/src/man/man1m/monitor.1m
index 748f7952f4..d5c58aa8c1 100644
--- a/usr/src/man/man1m/monitor.1m
+++ b/usr/src/man/man1m/monitor.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH monitor 1M "24 Jul 2003" "SunOS 5.11" "System Administration Commands"
+.TH MONITOR 1M "Jul 24, 2003"
 .SH NAME
 monitor \- SPARC system PROM monitor
 .SH SYNOPSIS
@@ -96,47 +96,39 @@ The following commands can be used at the OpenBoot monitor to access the
 \fBNVRAM\fR parameters.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprintenv\fR\fR
 .ad
 .RS 18n
-.rt  
 Used to list the \fBNVRAM\fR parameters, along with their default values and
 current values.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsetenv\fR\fI pn pv\fR\fR
 .ad
 .RS 18n
-.rt  
 Used to set or modify a parameter.  The \fIpn\fR represents the parameter name,
 and \fIpv\fR represents the parameter value.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBset-default\fR \fIpn\fR\fR
 .ad
 .RS 18n
-.rt  
 Used to set an individual parameter back to its default value.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBset-defaults\fR\fR
 .ad
 .RS 18n
-.rt  
 Used to reset all parameters to their default values.  (Note that
 \fB\&'set-defaults'\fR only affects parameters that have assigned default
 values.)
@@ -149,7 +141,6 @@ Newer OpenBoot monitors contain user interfaces that support the storage and
 listing of keys for later use by client programs.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist-security-keys\fR\fR
 .ad
@@ -160,7 +151,6 @@ Lists the names of keys currently stored on a machine.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBset-security-key\fR \fIkeyname\fR [ \fIkeydata\fR ]\fR
 .ad
@@ -183,34 +173,28 @@ run, if present, sending its results messages to the system's serial port A.
 Not all of the commands shown are available on all workstations.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtest-all\fR\fR
 .ad
 .RS 17n
-.rt  
 Run the diagnostic tests on each device which has provided a self-test.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtest\fR \fBfloppy\fR\fR
 .ad
 .RS 17n
-.rt  
 Run diagnostics on the system's floppy device.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtest\fR \fB/memory\fR\fR
 .ad
 .RS 17n
-.rt  
 Run the main memory tests.  If the \fBNVRAM\fR parameter \fB\&'diag-switch?'\fR
 is set to true, then all of main memory is tested.  If the parameter is false
 then only the amount of memory specified in the \fB\&'selftest-#megs'\fR
@@ -219,46 +203,38 @@ then only the amount of memory specified in the \fB\&'selftest-#megs'\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtest\fR \fBnet\fR\fR
 .ad
 .RS 17n
-.rt  
 Test the network connection for the on-board network controller.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwatch-net\fR\fR
 .ad
 .RS 17n
-.rt  
 Monitor the network attached to the on-board net controller.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwatch-net-all\fR\fR
 .ad
 .RS 17n
-.rt  
 Monitor the network attached to the on-board net controller, as well as the
 network controllers installed in SBus slots.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwatch-clock\fR\fR
 .ad
 .RS 17n
-.rt  
 Test the system's clock function.
 .RE
 
@@ -269,156 +245,128 @@ The following commands are available for displaying information about the
 system.  Not all commands are available on all workstations.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbanner\fR\fR
 .ad
 .RS 18n
-.rt  
 Display the power-on banner.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\&.enet-addr\fR\fR
 .ad
 .RS 18n
-.rt  
 Display the system's Ethernet address.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\&.idprom\fR\fR
 .ad
 .RS 18n
-.rt  
 Display the formatted contents of the \fBIDPROM.\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmodule-info\fR\fR
 .ad
 .RS 18n
-.rt  
 Display information about the system's processor(s).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprobe-scsi\fR\fR
 .ad
 .RS 18n
-.rt  
 Identify the devices attached to the on-board \fBSCSI\fR controller.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprobe-scsi-all\fR\fR
 .ad
 .RS 18n
-.rt  
 Identify the devices attached to the on-board \fBSCSI\fR controller as well as
 those devices which are attached to SBus \fBSCSI\fR controllers.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshow-disks\fR\fR
 .ad
 .RS 18n
-.rt  
 Display a list of the device paths for installed \fBSCSI\fR disk controllers.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshow-displays\fR\fR
 .ad
 .RS 18n
-.rt  
 Display a list of the device paths for installed display devices.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshow-nets\fR\fR
 .ad
 .RS 18n
-.rt  
 Display a list of the device paths for installed Ethernet controllers.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshow-sbus\fR\fR
 .ad
 .RS 18n
-.rt  
 Display list of installed SBus devices.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshow-tapes\fR\fR
 .ad
 .RS 18n
-.rt  
 Display a list of the device paths for installed \fBSCSI\fR tape controllers.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshow-ttys\fR\fR
 .ad
 .RS 18n
-.rt  
 Display a list of the device paths for tty devices.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\&.traps\fR\fR
 .ad
 .RS 18n
-.rt  
 Display a list of the SPARC trap types.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\&.version\fR\fR
 .ad
 .RS 18n
-.rt  
 Display the version and date of the OpenBoot PROM.
 .RE
 
@@ -437,35 +385,29 @@ allowed when one of the security modes has been set.  Not all commands are
 available on all workstations.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBStop (L1)\fR\fR
 .ad
 .RS 17n
-.rt  
 Bypass the Power-On Self Test (POST).  This is only effective if the system has
 been placed into the diagnostic mode.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBStop-A (L1-A)\fR\fR
 .ad
 .RS 17n
-.rt  
 Abort the current operation and return to the monitor's default prompt.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBStop-D (L1-D)\fR\fR
 .ad
 .RS 17n
-.rt  
 Set the system's \fB\&'diag-switch?'\fR \fBNVRAM\fR parameter to
 \fB\&'true'\fR, which places the system in diagnostic mode.  POST diagnostics,
 if present, are run, and the messages are displayed by way of the system's
@@ -474,12 +416,10 @@ serial port A.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBStop-F (L1-F)\fR\fR
 .ad
 .RS 17n
-.rt  
 Enter the OpenBoot monitor before the monitor has probed the system for
 devices.  Issue the \fB\&'fexit'\fR command to continue with system
 initialization.
@@ -487,12 +427,10 @@ initialization.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBStop-N (L1-N)\fR\fR
 .ad
 .RS 17n
-.rt  
 Causes the \fBNVRAM\fR parameters to be reset to their default values.  Note
 that not all parameters have default values.
 .RE
@@ -504,200 +442,164 @@ The following commands can be used while the monitor is displaying the \fBok\fR
 prompt.  Not all of these editing commands are available on all workstations.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCTRL-A\fR\fR
 .ad
 .RS 10n
-.rt  
 Place the cursor at the start of line.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCTRL-B\fR\fR
 .ad
 .RS 10n
-.rt  
 Move the cursor backward one character.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBESC-B\fR\fR
 .ad
 .RS 10n
-.rt  
 Move the cursor backward one word.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCTRL-D\fR\fR
 .ad
 .RS 10n
-.rt  
 Erase the character that the cursor is currently highlighting.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBESC-D\fR\fR
 .ad
 .RS 10n
-.rt  
 Erase the portion of word from the cursor's present position to the end of the
 word.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCTRL-E\fR\fR
 .ad
 .RS 10n
-.rt  
 Place the cursor at the end of line.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCTRL-F\fR\fR
 .ad
 .RS 10n
-.rt  
 Move the cursor forward one character.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBESC-F\fR\fR
 .ad
 .RS 10n
-.rt  
 Move the cursor forward one word.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCTRL-H\fR\fR
 .ad
 .RS 10n
-.rt  
 Erase the character preceding the cursor (also use Delete or Back Space)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBESC-H\fR\fR
 .ad
 .RS 10n
-.rt  
 Erase the portion of the word which precedes the cursor (use also \fBCTRL-W)\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCTRL-K\fR\fR
 .ad
 .RS 10n
-.rt  
 Erase from the cursor's present position to the end of the line.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCTRL-L\fR\fR
 .ad
 .RS 10n
-.rt  
 Show the command history list.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCTRL-N\fR\fR
 .ad
 .RS 10n
-.rt  
 Recall the next command from the command history list
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCTRL-P\fR\fR
 .ad
 .RS 10n
-.rt  
 Recall a previous command from the command history list.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCTRL-Q\fR\fR
 .ad
 .RS 10n
-.rt  
 Quote the next character (used to type a control character).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCTRL-R\fR\fR
 .ad
 .RS 10n
-.rt  
 Retype the current line.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCTRL-U\fR\fR
 .ad
 .RS 10n
-.rt  
 Erase from the cursor's present position to the beginning of the line.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCTRL-Y\fR\fR
 .ad
 .RS 10n
-.rt  
 Insert the contents of the memory buffer into the line, in front (to the left)
 of the cursor.
 .RE
@@ -731,7 +633,6 @@ The following commands are available systems with older  \fBSunMON\fR-based
 PROM:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB+\fR|\fB\(mi\fR\fR
 .ad
@@ -743,7 +644,6 @@ location.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB^C\fR\fI source destination n\fR\fR
 .ad
@@ -755,7 +655,6 @@ address to the \fIdestination\fR address.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB^I \fR\fIprogram\fR\fR
 .ad
@@ -766,7 +665,6 @@ address to the \fIdestination\fR address.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB^T \fR\fIvirtual_address\fR\fR
 .ad
@@ -778,7 +676,6 @@ mapped.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBb\fR [ \fB!\fR ] [ \fIdevice\fR [
 \fB(\fR\fIc\fR\fB,\fR\fIu\fR\fB,\fR\fIp\|\fR\fB)\fR\fI\fR ] ] [ \fIpathname\fR
@@ -791,7 +688,6 @@ mapped.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBb\fR[\fB?\fR]\fR
 .ad
@@ -805,120 +701,98 @@ disk, or from an Ethernet controller. `\fBb?\fR' displays all boot devices and
 their \fIdevice\fRs.
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdevice\fR\fR
 .ad
 .RS 18n
-.rt  
 one of
 .sp
 .ne 2
-.mk
 .na
 \fB\fBle\fR\fR
 .ad
 .RS 6n
-.rt  
 Lance Ethernet
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBie\fR\fR
 .ad
 .RS 6n
-.rt  
 Intel Ethernet
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsd\fR\fR
 .ad
 .RS 6n
-.rt  
 \fBSCSI\fR disk, CDROM
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBst\fR\fR
 .ad
 .RS 6n
-.rt  
 \fBSCSI\fR 1/4" or 1/2" tape
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfd\fR\fR
 .ad
 .RS 6n
-.rt  
 Diskette
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBid\fR\fR
 .ad
 .RS 6n
-.rt  
 IPI disk
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmt\fR\fR
 .ad
 .RS 6n
-.rt  
 Tape Master 9-track 1/2" tape
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBxd\fR\fR
 .ad
 .RS 6n
-.rt  
 Xylogics 7053 disk
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBxt\fR\fR
 .ad
 .RS 6n
-.rt  
 Xylogics 1/2" tape
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBxy\fR\fR
 .ad
 .RS 6n
-.rt  
 Xylogics 440/450 disk
 .RE
 
@@ -926,56 +800,46 @@ Xylogics 440/450 disk
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIc\fR\fR
 .ad
 .RS 18n
-.rt  
 A controller number (\fB0\fR if only one controller),
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIu\fR\fR
 .ad
 .RS 18n
-.rt  
 A unit number (\fB0\fR if only one driver), and
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIp\fR\fR
 .ad
 .RS 18n
-.rt  
 A partition.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpathname\fR\fR
 .ad
 .RS 18n
-.rt  
 A pathname for a program such as \fB/stand/diag\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIarguments_list\fR\fR
 .ad
 .RS 18n
-.rt  
 A list of up to seven arguments to pass to the program being booted.
 .RE
 
@@ -983,7 +847,6 @@ A list of up to seven arguments to pass to the program being booted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBc [\fR\fIvirtual_address\fR\fB]\fR\fR
 .ad
@@ -996,7 +859,6 @@ restored to the values shown by the \fBd\fR, and \fBr\fR commands.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBd [\fR\fIwindow_number\fR\fB]\fR\fR
 .ad
@@ -1045,12 +907,10 @@ status register along with 32 floating-point registers are also shown.
 .RE
 .sp
 .ne 2
-.mk
 .na
 \fB\fIwindow_number\fR\fR
 .ad
 .RS 17n
-.rt  
 Display the indicated \fIwindow_number\fR, which can be any value between
 \fB0\fR and \fB6\fR, inclusive.  If no window is specified and the \fBPSR's\fR
 current window pointer contains a valid window number, registers from the
@@ -1062,7 +922,6 @@ Otherwise, registers from window 0 are displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBe\fR [\fIvirtual_address\fR]\|[\fIaction\fR] .\|.\|.\fR
 .ad
@@ -1075,7 +934,6 @@ interpreted in the address space defined by the \fBs\fR command. See the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBf\fR\fI virtual_address1 virtual_address2 pattern \fR [\fIsize\|\fR]\fR
 .ad
@@ -1086,34 +944,28 @@ Fill the bytes, words, or long words from \fIvirtual_address1\fR (lower) to
 \fBsize\fR argument can take one of the following values:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBb\fR\fR
 .ad
 .RS 5n
-.rt  
 byte format (the default)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBw\fR\fR
 .ad
 .RS 5n
-.rt  
 word format
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBl\fR\fR
 .ad
 .RS 5n
-.rt  
 long word format
 .RE
 
@@ -1125,7 +977,6 @@ For example, the following command fills the address block from \fB0x1000\fR to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBg\fR [\fIvector\|\fR] [\fIargument\|\fR]\fR
 .ad
@@ -1151,23 +1002,19 @@ The default routine, defined by the monitor, prints the user-supplied
 can be one of:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%x\fR\fR
 .ad
 .RS 6n
-.rt  
 hexadecimal
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%d\fR\fR
 .ad
 .RS 6n
-.rt  
 decimal
 .RE
 
@@ -1175,7 +1022,6 @@ decimal
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBg0\fR\fR
 .ad
@@ -1187,7 +1033,6 @@ of the system being interrupted,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBg4\fR\fR
 .ad
@@ -1199,7 +1044,6 @@ a result of the system being interrupted,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBh\fR\fR
 .ad
@@ -1212,7 +1056,6 @@ pressing \fBRETURN.\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBi \fR[\fIcache_data_offset\fR\|] [\fIaction\fR\|]\|.\|.\|.\fR
 .ad
@@ -1225,7 +1068,6 @@ cache data addresses.  See the \fBa\fR command for a description of
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBj\fR [\fIcache_tag_offset\fR\|] [\fIaction\|\fR]\|.\|.\|.\fR
 .ad
@@ -1238,7 +1080,6 @@ of \fIaction\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBk [\fR\fIreset_level\fR\fB]\fR\fR
 .ad
@@ -1247,35 +1088,29 @@ of \fIaction\fR.
 Reset the system, where \fIreset_level\fR is:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Reset \fBVMEbus,\fR interrupt registers, video monitor (Sun-4 systems). This is
 the default.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Software reset.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Power-on reset. Resets and clears the memory. Runs the \fBEPROM-based\fR
 diagnostic self test, which can take several minutes, depending upon how much
 memory is being tested.
@@ -1285,7 +1120,6 @@ memory is being tested.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBkb\fR\fR
 .ad
@@ -1296,7 +1130,6 @@ Display the system banner.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBl\|\fR [\fIvirtual_address\fR\|]\|[\fIaction\fR]\|.\|.\|.\fR
 .ad
@@ -1309,7 +1142,6 @@ command (below).  See the \fBa\fR command for a description of \fIaction\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBm\|\fR [\fIvirtual_address\fR\|]\|[\fIaction\fR\|]\|.\|.\|.\fR
 .ad
@@ -1322,18 +1154,16 @@ the \fBa\fR command for a description of \fIaction\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBne\fR\fR
 .ad
 .sp .6
 .RS 4n
- 
+
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBni\fR\fR
 .ad
@@ -1344,7 +1174,6 @@ Disable, enable, or invalidate the cache, respectively.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBo\|\fR [\fIvirtual_address\fR\|]\|[action\fI]\|.\|.\|.\fR\fR
 .ad
@@ -1357,7 +1186,6 @@ the \fBa\fR command for a description of \fIaction\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBp\|\fR [\fIvirtual_address\fR\|]\|[\fIaction\fR].\|.\|.\fR
 .ad
@@ -1370,7 +1198,6 @@ description of \fIaction\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBq\|\fR [\fIeeprom_offset\fR\|]\|[\fIaction\fR\|].\|.\|.\fR
 .ad
@@ -1388,7 +1215,6 @@ the \fBa\fR command for a description of \fIaction\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBr\|\fR [\fIregister_number\|\fR]\fR
 .ad
@@ -1406,111 +1232,91 @@ Display and/or modify one or more of the \fBIU\fR or \fBFPU\fR registers. A
 hexadecimal \fIregister_number\fR can be one of:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0x00\fR\(mi\fB0x0f\fR\fR
 .ad
 .RS 16n
-.rt  
 window(0,i0)\(miwindow(0,i7), window(0,i0)\(emwindow(0,i7)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0x16\fR\(mi\fB0x1f\fR\fR
 .ad
 .RS 16n
-.rt  
 window(1,i0)\(miwindow(1,i7), window(1,i0)\(emwindow(1,i7)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0x20\fR\(mi\fB0x2f\fR\fR
 .ad
 .RS 16n
-.rt  
 window(2,i0)\(miwindow(2,i7), window(2,i0)\(emwindow(2,i7)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0x30\fR\(mi\fB0x3f\fR\fR
 .ad
 .RS 16n
-.rt  
 window(3,i0)\(miwindow(3,i7), window(3,i0)\(emwindow(3,i7)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0x40\fR\(mi\fB0x4f\fR\fR
 .ad
 .RS 16n
-.rt  
 window(4,i0)\(miwindow(4,i7), window(4,i0)\(emwindow(4,i7)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0x50\fR\(mi\fB0x5f\fR\fR
 .ad
 .RS 16n
-.rt  
 window(5,i0)\(miwindow(5,i7), window(5,i0)\(emwindow(5,i7)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0x60\fR\(mi\fB0x6f\fR\fR
 .ad
 .RS 16n
-.rt  
 window(6,i0)\(miwindow(6,i7), window(6,i0)\(emwindow(6,i7)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0x70\fR\(mi\fB0x77\fR\fR
 .ad
 .RS 16n
-.rt  
 \fBg0, g1, g2, g3, g4, g5, g6, g7\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0x78\fR\(mi\fB0x7d\fR\fR
 .ad
 .RS 16n
-.rt  
 \fBPSR,\fR \fBPC,\fR \fBnPC,\fR \fBWIM,\fR \fBTBR,\fR \fBY.\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0x7e\fR\(mi\fB0x9e\fR\fR
 .ad
 .RS 16n
-.rt  
 \fBFSR,\fR f0\(mif31
 .RE
 
@@ -1522,34 +1328,28 @@ If a \fIregister_type\fR is given, the first register of the indicated type is
 displayed. \fIregister_type\fR can be one of:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBf\fR\fR
 .ad
 .RS 5n
-.rt  
 floating-point
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBg\fR\fR
 .ad
 .RS 5n
-.rt  
 global
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBs\fR\fR
 .ad
 .RS 5n
-.rt  
 special
 .RE
 
@@ -1562,7 +1362,6 @@ invalid, window 0 is used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBs [\fR\fIasi\fR\fB])\fR\fR
 .ad
@@ -1573,122 +1372,100 @@ displays the current Address Space Identifier.  The \fIasi\fR value can be one
 of:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0x2\fR\fR
 .ad
 .RS 7n
-.rt  
 control space
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0x3\fR\fR
 .ad
 .RS 7n
-.rt  
 segment table
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0x4\fR\fR
 .ad
 .RS 7n
-.rt  
 Page table
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0x8\fR\fR
 .ad
 .RS 7n
-.rt  
 user instruction
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0x9\fR\fR
 .ad
 .RS 7n
-.rt  
 supervisor instruction
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0xa\fR\fR
 .ad
 .RS 7n
-.rt  
 user data
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0xb\fR\fR
 .ad
 .RS 7n
-.rt  
 supervisor data
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0xc\fR\fR
 .ad
 .RS 7n
-.rt  
 flush segment
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0xd\fR\fR
 .ad
 .RS 7n
-.rt  
 flush page
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0xe\fR\fR
 .ad
 .RS 7n
-.rt  
 flush context
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0xf\fR\fR
 .ad
 .RS 7n
-.rt  
 cache data
 .RE
 
@@ -1696,7 +1473,6 @@ cache data
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBu\fR [ \fBecho\fR ]\fR
 .ad
@@ -1707,7 +1483,6 @@ cache data
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBu\fR [ \fIport\fR ] [ \fIoptions\fR ] [ \fIbaud_rate\fR ]\fR
 .ad
@@ -1718,7 +1493,6 @@ cache data
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBu\fR [ \fBu\fR ] [ \fIvirtual_address\fR ]\fR
 .ad
@@ -1732,67 +1506,55 @@ With the \fBu\fR argument (\fBuu\fR.\|.\|.), set the I/O device to be the
 \fIvirtual_address\fR of a \fBUART\fR device currently mapped.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBecho\fR\fR
 .ad
 .RS 13n
-.rt  
  Can be either \fBe\fR to enable input to be echoed to the output device, or
 \fBne\fR, to indicate that input is not echoed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIport\fR\fR
 .ad
 .RS 13n
-.rt  
 Assign the indicated \fIport\fR to be the current I/O device. \fIport\fR can be
 one of:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBa\fR\fR
 .ad
 .RS 5n
-.rt  
 serial port A
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBb\fR\fR
 .ad
 .RS 5n
-.rt  
 serial port B
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBk\fR\fR
 .ad
 .RS 5n
-.rt  
 the workstation keyboard
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBs\fR\fR
 .ad
 .RS 5n
-.rt  
 the workstation screen
 .RE
 
@@ -1800,87 +1562,71 @@ the workstation screen
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIbaud_rate\fR\fR
 .ad
 .RS 13n
-.rt  
 Any legal baud rate.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIoptions\fR\fR
 .ad
 .RS 11n
-.rt  
 can be any combination of:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBi\fR\fR
 .ad
 .RS 6n
-.rt  
 input
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBo\fR\fR
 .ad
 .RS 6n
-.rt  
 output
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBu\fR\fR
 .ad
 .RS 6n
-.rt  
 \fBUART\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBe\fR\fR
 .ad
 .RS 6n
-.rt  
 echo input to output
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBne\fR\fR
 .ad
 .RS 6n
-.rt  
 do not echo input
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBr\fR\fR
 .ad
 .RS 6n
-.rt  
 reset indicated serial port (\fBa\fR and \fBb\fR ports only)
 .RE
 
@@ -1894,7 +1640,6 @@ options, it is assigned for output only.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBv\fR\fI virtual_address1 virtual_address2 \fR [\fBsize\fR]\fR
 .ad
@@ -1904,34 +1649,28 @@ Display the contents of \fIvirtual_address1\fR (lower) \fIvirtual_address2\fR
 (higher) in the format specified by \fBsize\fR:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBb\fR\fR
 .ad
 .RS 5n
-.rt  
 byte format (the default)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBw\fR\fR
 .ad
 .RS 5n
-.rt  
 word format
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBl\fR\fR
 .ad
 .RS 5n
-.rt  
 long word format
 .RE
 
@@ -1946,7 +1685,6 @@ space from address  \fB0x1000\fR to  \fB0x2000\fR in word format:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBw\|\fR [\fIvirtual_address\|\fR]\|[\fIargument\|\fR]\fR
 .ad
@@ -1966,23 +1704,19 @@ The default routine, defined by the monitor, prints the user-supplied
 can be one of:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%x\fR\fR
 .ad
 .RS 6n
-.rt  
 hexadecimal
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB%d\fR\fR
 .ad
 .RS 6n
-.rt  
 decimal
 .RE
 
@@ -1990,7 +1724,6 @@ decimal
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBx\fR\fR
 .ad
@@ -2003,7 +1736,6 @@ keyboard, and boot device paths.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBy\|c\fR\fI context_number\fR\fR
 .ad
@@ -2014,7 +1746,6 @@ keyboard, and boot device paths.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBy\|p|s\|\fR\fI context_number virtual_address\fR\fR
 .ad
@@ -2023,35 +1754,29 @@ keyboard, and boot device paths.
 Flush the indicated context, context page, or context segment.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBc\fR\fR
 .ad
 .RS 5n
-.rt  
 flush context \fIcontext_number\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBp\fR\fR
 .ad
 .RS 5n
-.rt  
 flush the page beginning at \fIvirtual_address\fR within context
 \fIcontext_number\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBs\fR\fR
 .ad
 .RS 5n
-.rt  
 flush the segment beginning at \fIvirtual_address\fR within context
 \fIcontext_number\fR
 .RE
@@ -2066,13 +1791,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-ArchitectureSPARC
+Architecture	SPARC
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/mount.1m b/usr/src/man/man1m/mount.1m
index 9482442e18..ff6e079bae 100644
--- a/usr/src/man/man1m/mount.1m
+++ b/usr/src/man/man1m/mount.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mount 1M "29 May 2008" "SunOS 5.11" "System Administration Commands"
+.TH MOUNT 1M "May 29, 2008"
 .SH NAME
 mount, umount \- mount or unmount file systems and remote resources
 .SH SYNOPSIS
@@ -14,19 +14,19 @@ mount, umount \- mount or unmount file systems and remote resources
 
 .LP
 .nf
-\fBmount\fR [\fB-F\fR \fIFSType\fR] [\fIgeneric_options\fR] [\fB-o\fR \fIspecific_options\fR] 
+\fBmount\fR [\fB-F\fR \fIFSType\fR] [\fIgeneric_options\fR] [\fB-o\fR \fIspecific_options\fR]
      [\fB-O\fR] \fIspecial\fR | \fImount_point\fR
 .fi
 
 .LP
 .nf
-\fBmount\fR [\fB-F\fR \fIFSType\fR] [\fIgeneric_options\fR] [\fB-o\fR \fIspecific_options\fR] 
+\fBmount\fR [\fB-F\fR \fIFSType\fR] [\fIgeneric_options\fR] [\fB-o\fR \fIspecific_options\fR]
      [\fB-O\fR] \fIspecial\fR \fImount_point\fR
 .fi
 
 .LP
 .nf
-\fBmount\fR \fB-a\fR [\fB-F\fR \fIFSType\fR] [\fB-V\fR] [\fIcurrent_options\fR] 
+\fBmount\fR \fB-a\fR [\fB-F\fR \fIFSType\fR] [\fB-V\fR] [\fIcurrent_options\fR]
      [\fB-o\fR \fIspecific_options\fR] [\fImount_point\fR]...
 .fi
 
@@ -91,7 +91,6 @@ can use \fBmount\fR to list mounted file systems and resources.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fIFSType\fR\fR
 .ad
@@ -104,7 +103,6 @@ specified or must be determinable from \fB/etc/vfstab\fR, or by consulting
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR [ \fImount_points\fR. . . ]\fR
 .ad
@@ -125,7 +123,6 @@ required file systems: \fB/\fR, \fB/usr\fR, \fB/var\fR, \fB/var/adm\fR,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -141,7 +138,6 @@ unmounted will get an error (\fBEIO\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
@@ -153,7 +149,6 @@ the only option specified. See \fBBUGS\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -165,7 +160,6 @@ option specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
@@ -179,7 +173,6 @@ should be used to verify and validate the command line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIgeneric_options\fR\fR
 .ad
@@ -189,7 +182,6 @@ Options that are commonly supported by most \fIFSType\fR-specific command
 modules. The following options are available:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
@@ -200,7 +192,6 @@ Mount the file system without making an entry in \fB/etc/mnttab\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR\fR
 .ad
@@ -213,7 +204,6 @@ effect.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
@@ -229,7 +219,6 @@ ignored.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdevices | nodevices\fR\fR
 .ad
@@ -244,7 +233,6 @@ equivalent to that of \fBnosuid\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBexec | noexec\fR\fR
 .ad
@@ -257,7 +245,6 @@ default is \fBexec\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBloop\fR\fR
 .ad
@@ -268,7 +255,6 @@ Ignored for compatibility.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnbmand | nonbmand\fR\fR
 .ad
@@ -309,7 +295,6 @@ option. See \fB-g\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBro | rw\fR\fR
 .ad
@@ -320,7 +305,6 @@ Specify read-only or read-write. The default is \fBrw\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsetuid | nosetuid\fR\fR
 .ad
@@ -343,7 +327,6 @@ programs to the server or create devices that could open security holes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsuid | nosuid\fR\fR
 .ad
@@ -367,7 +350,6 @@ holes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-O\fR\fR
 .ad
@@ -381,7 +363,6 @@ producing the error "device busy".
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -417,7 +398,6 @@ bytes).
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mnttab\fR\fR
 .ad
@@ -428,7 +408,6 @@ Table of mounted file systems.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/fs\fR\fR
 .ad
@@ -438,7 +417,6 @@ Default local file system type. Default values can be set for the following
 flags in \fB/etc/default/fs\fR. For example: \fBLOCAL=ufs\fR
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLOCAL:\fR\fR
 .ad
@@ -451,7 +429,6 @@ The default partition for a command if no \fIFSType\fR is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vfstab\fR\fR
 .ad
diff --git a/usr/src/man/man1m/mount_cachefs.1m b/usr/src/man/man1m/mount_cachefs.1m
index 78c8178b56..3890de0c8e 100644
--- a/usr/src/man/man1m/mount_cachefs.1m
+++ b/usr/src/man/man1m/mount_cachefs.1m
@@ -3,14 +3,14 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mount_cachefs 1M "18 Mar 2004" "SunOS 5.11" "System Administration Commands"
+.TH MOUNT_CACHEFS 1M "Mar 18, 2004"
 .SH NAME
 mount_cachefs \- mount CacheFS file systems
 .SH SYNOPSIS
 .LP
 .nf
-\fBmount\fR \fB-F\fR cachefs [\fIgeneric_options\fR] \fB-o\fR backfstype=\fIfile_system_type\fR 
-     [\fIspecific_options\fR] 
+\fBmount\fR \fB-F\fR cachefs [\fIgeneric_options\fR] \fB-o\fR backfstype=\fIfile_system_type\fR
+     [\fIspecific_options\fR]
      [\fB-O\fR] \fIspecial\fR \fImount_point\fR
 .fi
 
@@ -36,17 +36,14 @@ To mount a CacheFS file system, use the generic \fBmount\fR command with the
 See \fBmount\fR(1M) for a list of supported \fIgeneric_options\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-o\fR\fB \fR\fIspecific_options\fR\fR
 .ad
 .RS 23n
-.rt  
 Specify CacheFS file system specific options in a comma-separated list with no
 intervening spaces.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBacdirmax=\fR\fIn\fR\fR
 .ad
@@ -59,7 +56,6 @@ purged from the cache. The default value is \fB30\fR seconds.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBacdirmin=\fR\fIn\fR\fR
 .ad
@@ -74,7 +70,6 @@ retrieved from the back file system. The default value is \fB30\fR seconds.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBacregmax=\fR\fIn\fR\fR
 .ad
@@ -87,7 +82,6 @@ from the cache. The default value is \fB30\fR seconds.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBacregmin=\fR\fIn\fR\fR
 .ad
@@ -102,7 +96,6 @@ from the back file system. The default value is \fB30\fR seconds.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBactimeo=\fR\fIn\fR\fR
 .ad
@@ -114,7 +107,6 @@ Sets \fBacregmin\fR, \fBacregmax\fR, \fBacdirmin\fR, and \fBacdirmax\fR to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbackfstype=\fR\fIfile_system_type\fR\fR
 .ad
@@ -125,7 +117,6 @@ The file system type of the back file system (can be \fBnfs\fR or \fBhsfs\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbackpath=\fR\fIpath\fR\fR
 .ad
@@ -138,7 +129,6 @@ back file system must be read-only.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcachedir=\fR\fIdirectory\fR\fR
 .ad
@@ -149,7 +139,6 @@ The name of the cache directory.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcacheid=\fR\fIID\fR\fR
 .ad
@@ -161,7 +150,6 @@ specify a cache ID, CacheFS will construct one.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdemandconst\fR\fR
 .ad
@@ -176,7 +164,6 @@ useful for back file systems that change infrequently, for example,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlocal-access\fR\fR
 .ad
@@ -189,7 +176,6 @@ not use this argument with secure \fBNFS\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnoconst\fR\fR
 .ad
@@ -204,7 +190,6 @@ will not be modified. Trying to perform cache consistency check using
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwrite-around\fR | \fBnon-shared\fR\fR
 .ad
@@ -222,12 +207,10 @@ back file system, and the file remains in the cache.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-O\fR\fR
 .ad
 .RS 23n
-.rt  
 Overlay mount. Allows the filesystem to be mounted over an existing mount
 point, making the underlying filesystem inaccessible. If a mount is attempted
 on a pre-existing mount point without setting this flag, mount will fail with
@@ -259,7 +242,7 @@ the \fBmount\fR command is executed:
 .sp
 .in +2
 .nf
-server1:/user2   /usr/abc        nfs 
+server1:/user2   /usr/abc        nfs
 /usr/abc         /cache1/xyz    cachefs     backfstype=nfs
 .fi
 .in -2
diff --git a/usr/src/man/man1m/mount_hsfs.1m b/usr/src/man/man1m/mount_hsfs.1m
index fddccefd5c..7e88c90f1f 100644
--- a/usr/src/man/man1m/mount_hsfs.1m
+++ b/usr/src/man/man1m/mount_hsfs.1m
@@ -3,19 +3,19 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mount_hsfs 1M "29 May 2008" "SunOS 5.11" "System Administration Commands"
+.TH MOUNT_HSFS 1M "May 29, 2008"
 .SH NAME
 mount_hsfs \- mount hsfs file systems
 .SH SYNOPSIS
 .LP
 .nf
-\fBmount\fR \fB-F\fR hsfs [\fIgeneric_options\fR] 
+\fBmount\fR \fB-F\fR hsfs [\fIgeneric_options\fR]
      [\fB-o\fR \fIFSType-specific_options\fR] [\fB-O\fR ] \fIspecial\fR | \fImount_point\fR
 .fi
 
 .LP
 .nf
-\fBmount\fR \fB-F\fR hsfs [\fIgeneric_options\fR] 
+\fBmount\fR \fB-F\fR hsfs [\fIgeneric_options\fR]
      [\fB-o\fR \fIFSType-specific_options\fR] [\fB-O\fR] \fIspecial\fR \fImount_point\fR
 .fi
 
@@ -46,7 +46,6 @@ overcome limitations of the original ISO 9660:1988 (version 1) standard. The
 following types of extensions are supported by \fBhsfs\fR:
 .sp
 .ne 2
-.mk
 .na
 \fBRock Ridge extensions\fR
 .ad
@@ -64,7 +63,6 @@ of Rock Ridge or to use a different extension.
 
 .sp
 .ne 2
-.mk
 .na
 \fBISO9660:1999 (version 2) extensions\fR
 .ad
@@ -82,7 +80,6 @@ the media.
 
 .sp
 .ne 2
-.mk
 .na
 \fBJoliet extensions\fR
 .ad
@@ -103,7 +100,6 @@ truncated.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fIgeneric_options\fR\fR
 .ad
@@ -114,7 +110,6 @@ See \fBmount\fR(1M) for the list of supported options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
@@ -125,7 +120,6 @@ specified, a warning message is printed and the invalid options are ignored.
 The following options are available:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBglobal\fR |  \fBnoglobal\fR\fR
 .ad
@@ -139,7 +133,6 @@ globally visible. The default behavior is \fBnoglobal\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBro\fR\fR
 .ad
@@ -150,7 +143,6 @@ Mount the file system read-only.  This option is required.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrr\fR | \fBnrr\fR\fR
 .ad
@@ -164,7 +156,6 @@ available extensions or fall back to plain ISO9660.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvers2\fR | \fBnovers2\fR\fR
 .ad
@@ -180,7 +171,6 @@ are available.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBjoliet\fR | \fBnojoliet\fR\fR
 .ad
@@ -194,7 +184,6 @@ If \fBnojoliet\fR is specified, it will fall back to using plain ISO9660.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnotraildot\fR\fR
 .ad
@@ -216,7 +205,6 @@ active, \fBhsfs\fR quietly ignores this option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnomaplcase\fR\fR
 .ad
@@ -233,7 +221,6 @@ off this mapping. The exceptions for  \fBnotraildot\fR discussed above apply to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-O\fR\fR
 .ad
@@ -264,7 +251,6 @@ The following commands mount and unmount a DVD image.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mnttab\fR\fR
 .ad
@@ -275,7 +261,6 @@ table of mounted file systems
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vfstab\fR\fR
 .ad
diff --git a/usr/src/man/man1m/mount_nfs.1m b/usr/src/man/man1m/mount_nfs.1m
index 83cd0783c1..3246d42656 100644
--- a/usr/src/man/man1m/mount_nfs.1m
+++ b/usr/src/man/man1m/mount_nfs.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mount_nfs 1M "26 Jul 2009" "SunOS 5.11" "System Administration Commands"
+.TH MOUNT_NFS 1M "Jul 26, 2009"
 .SH NAME
 mount_nfs \- mount remote NFS resources
 .SH SYNOPSIS
@@ -54,7 +54,6 @@ interpreted as the separator between the host name and path, for example,
 \fB[1080::8:800:200C:417A]:tmp/file\fR. See \fBinet\fR(7P) and \fBinet6\fR(7P).
 .sp
 .ne 2
-.mk
 .na
 \fB\fIhost\fR:\fIpathname\fR\fR
 .ad
@@ -68,7 +67,6 @@ necessarily slash-separated, though on most servers, this is the case.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fInfs\fR://\fIhost\fR[:\fIport\fR]/\fIpathname\fR\fR
 .ad
@@ -82,7 +80,6 @@ for a more detailed discussion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIhost\fR:\fIpathname\fR
 \fInfs\fR://\fIhost\fR[:\fIport\fR]/\fIpathname\fR\fR
@@ -102,7 +99,6 @@ SYSTEMS\fR for a more detailed discussion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIhostlist\fR \fIpathname\fR\fR
 .ad
@@ -129,7 +125,6 @@ See \fBmount\fR(1M) for the list of supported \fIgeneric_options\fR. See
 \fBshare_nfs\fR(1M) for a description of server options.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIspecific_options\fR\fR
 .ad
@@ -139,7 +134,6 @@ Set file system specific options according to a comma-separated list with no
 intervening spaces.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBacdirmax=\fR\fIn\fR\fR
 .ad
@@ -151,7 +145,6 @@ The default value is \fB60\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBacdirmin=\fR\fIn\fR\fR
 .ad
@@ -163,7 +156,6 @@ default value is \fB30\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBacregmax=\fR\fIn\fR\fR
 .ad
@@ -175,7 +167,6 @@ modification. The default value is \fB60\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBacregmin=\fR\fIn\fR\fR
 .ad
@@ -187,7 +178,6 @@ The default value is \fB3\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBactimeo=\fR\fIn\fR\fR
 .ad
@@ -204,7 +194,6 @@ description of how \fBacdirmax\fR, \fBacdirmin\fR, \fBacregmax\fR,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbg\fR | \fBfg\fR\fR
 .ad
@@ -216,7 +205,6 @@ default is \fBfg\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBforcedirectio\fR | \fBnoforcedirectio\fR\fR
 .ad
@@ -233,7 +221,6 @@ The default behavior is \fBnoforcedirectio\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgrpid\fR\fR
 .ad
@@ -252,7 +239,6 @@ is unconditionally inherited from that of the parent directory.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhard\fR | \fBsoft\fR\fR
 .ad
@@ -265,7 +251,6 @@ NFSv4 clients do not support soft mounts.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBintr\fR | \fBnointr\fR\fR
 .ad
@@ -279,7 +264,6 @@ can be waiting for a remote mount.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnoac\fR\fR
 .ad
@@ -292,7 +276,6 @@ is immediately written to the server.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnocto\fR\fR
 .ad
@@ -314,7 +297,6 @@ condition, the effect of \fB-nocto\fR can be a slight performance gain.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBport=\fR\fIn\fR\fR
 .ad
@@ -328,7 +310,6 @@ then the \fBport\fR number in the option and in the \fBURL\fR must be the same.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBposix\fR\fR
 .ad
@@ -341,7 +322,6 @@ regarding POSIX.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBproto=\fR\fInetid\fR | \fBrdma\fR\fR
 .ad
@@ -365,7 +345,6 @@ protocol with the \fBproto\fR option, NFS version 4 is not used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpublic\fR\fR
 .ad
@@ -379,7 +358,6 @@ under \fBNFS FILE SYSTEMS\fR for a more detailed discussion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBquota\fR | \fBnoquota\fR\fR
 .ad
@@ -392,7 +370,6 @@ are still checked for operations on this file system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremount\fR\fR
 .ad
@@ -405,7 +382,6 @@ only on currently mounted read-only file systems.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBretrans=\fR\fIn\fR\fR
 .ad
@@ -418,7 +394,6 @@ it is assumed that the transport performs retransmissions on behalf of NFS.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBretry=\fR\fIn\fR\fR
 .ad
@@ -435,7 +410,6 @@ errors.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrsize=\fR\fIn\fR\fR
 .ad
@@ -452,7 +426,6 @@ transports.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsec=\fR\fImode\fR\fR
 .ad
@@ -480,7 +453,6 @@ for the available \fImode\fR options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsecure\fR\fR
 .ad
@@ -491,7 +463,6 @@ This option has been deprecated in favor of the \fBsec=\fR\fIdh\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtimeo=\fR\fIn\fR\fR
 .ad
@@ -506,7 +477,6 @@ which are outside the control of NFS.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvers=\fR\fINFS version number\fR\fR
 .ad
@@ -522,7 +492,6 @@ maximum, the next lowest version attempted until a matching version is found.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwsize=\fR\fIn\fR\fR
 .ad
@@ -539,7 +508,6 @@ transports.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBxattr\fR | \fBnoxattr\fR\fR
 .ad
@@ -554,7 +522,6 @@ attributes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-O\fR\fR
 .ad
@@ -569,7 +536,6 @@ producing the error "device busy."
 .SH NFS FILE SYSTEMS
 .sp
 .ne 2
-.mk
 .na
 \fBBackground versus Foreground\fR
 .ad
@@ -591,7 +557,6 @@ specified in the \fBretrans=\fR\fIn\fR option, a file system mounted with the
 
 .sp
 .ne 2
-.mk
 .na
 \fBHard versus Soft\fR
 .ad
@@ -606,7 +571,6 @@ recommended.
 
 .sp
 .ne 2
-.mk
 .na
 \fBAuthenticated requests\fR
 .ad
@@ -618,7 +582,6 @@ The server can require authenticated \fBNFS\fR requests from the client.
 
 .sp
 .ne 2
-.mk
 .na
 \fBURLs and the public option\fR
 .ad
@@ -652,7 +615,7 @@ public option      Force public file          Force public file
 default            Use MOUNT protocol.        Try public file handle
                                                with Canonical paths.
                                                Fall back to MOUNT
-                                               protocol if not 
+                                               protocol if not
                                                supported.
 .fi
 .in -2
@@ -666,7 +629,6 @@ paths.
 
 .sp
 .ne 2
-.mk
 .na
 \fBReplicated file systems and failover\fR
 .ad
@@ -727,7 +689,7 @@ following command:
 .sp
 .in +2
 .nf
-example# mount -o acdirmax=10,actimeo=1000 server:/path /localpath 
+example# mount -o acdirmax=10,actimeo=1000 server:/path /localpath
 .fi
 .in -2
 
@@ -873,7 +835,6 @@ example# mount serv\(mix:/usr/man,serv\(miy:/var/man,nfs://serv-z/man /usr/man
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mnttab\fR\fR
 .ad
@@ -884,7 +845,6 @@ table of mounted file systems
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dfs/fstypes\fR\fR
 .ad
@@ -895,7 +855,6 @@ default distributed file system type
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vfstab\fR\fR
 .ad
diff --git a/usr/src/man/man1m/mount_pcfs.1m b/usr/src/man/man1m/mount_pcfs.1m
index 61b5f0f55d..10d1d6c982 100644
--- a/usr/src/man/man1m/mount_pcfs.1m
+++ b/usr/src/man/man1m/mount_pcfs.1m
@@ -3,19 +3,19 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mount_pcfs 1M "12 May 2008" "SunOS 5.11" "System Administration Commands"
+.TH MOUNT_PCFS 1M "May 12, 2008"
 .SH NAME
 mount_pcfs \- mount pcfs file systems
 .SH SYNOPSIS
 .LP
 .nf
-\fBmount\fR \fB-F\fR pcfs [\fIgeneric_options\fR] 
+\fBmount\fR \fB-F\fR pcfs [\fIgeneric_options\fR]
      [\fB-o\fR \fIFSType-specific_options\fR] \fIspecial\fR | \fImount_point\fR
 .fi
 
 .LP
 .nf
-\fBmount\fR \fB-F\fR pcfs [\fIgeneric_options\fR] 
+\fBmount\fR \fB-F\fR pcfs [\fIgeneric_options\fR]
      [\fB-o\fR \fIFSType-specific_options\fR] \fIspecial\fR \fImount_point\fR
 .fi
 
@@ -63,7 +63,6 @@ system with either a 12-bit, 16-bit, or 32-bit File Allocation Table.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fIgeneric_options\fR\fR
 .ad
@@ -74,7 +73,6 @@ See \fBmount\fR(1M) for the list of supported options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
@@ -84,7 +82,6 @@ Specify \fBpcfs\fR file system-specific options. The following options are
 supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBclamptime\fR | \fBnoclamptime\fR\fR
 .ad
@@ -107,7 +104,6 @@ encounter \fBEOVERFLOW\fR errors.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfoldcase\fR | \fBnofoldcase\fR\fR
 .ad
@@ -120,7 +116,6 @@ The default is \fBnofoldcase\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhidden\fR | \fBnohidden\fR\fR
 .ad
@@ -134,7 +129,6 @@ of the Solaris operating system used the \fBnohidden\fR option as the default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBatime\fR | \fBnoatime\fR\fR
 .ad
@@ -148,7 +142,6 @@ be minimized, to prolong lifetime.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtimezone=\fItimezone\fR\fR\fR
 .ad
@@ -170,7 +163,6 @@ variable.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mnttab\fR\fR
 .ad
@@ -181,7 +173,6 @@ table of mounted file systems
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vfstab\fR\fR
 .ad
diff --git a/usr/src/man/man1m/mount_smbfs.1m b/usr/src/man/man1m/mount_smbfs.1m
index 142ed50520..7ac4852284 100644
--- a/usr/src/man/man1m/mount_smbfs.1m
+++ b/usr/src/man/man1m/mount_smbfs.1m
@@ -6,7 +6,7 @@
 .\" BY THE AUTHOR AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 .\" SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
 .\" OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-.TH mount_smbfs 1M "31 Mar 2009" "SunOS 5.11" "System Administration Commands"
+.TH MOUNT_SMBFS 1M "Mar 31, 2009"
 .SH NAME
 mount_smbfs, umount_smbfs \- mount and unmount a shared resource from a CIFS
 file server
@@ -23,7 +23,7 @@ file server
 
 .LP
 .nf
-\fB/sbin/mount\fR [\fB-F smbfs\fR] [\fIgeneric-options\fR] [\fB-o\fR \fIname\fR\fB=\fR\fIvalue\fR] 
+\fB/sbin/mount\fR [\fB-F smbfs\fR] [\fIgeneric-options\fR] [\fB-o\fR \fIname\fR\fB=\fR\fIvalue\fR]
      [\fB-O\fR] \fIresource\fR \fImount-point\fR
 .fi
 
@@ -82,7 +82,6 @@ To enable the service, enter the following \fBsvcadm\fR(1M) command:
 The \fBmount\fR command supports the following operands:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIresource\fR
 //[\fIworkgroup\fR;][\fIuser\fR[:\fIpassword\fR]@]\fIserver\fR/\fIshare\fR\fR
@@ -137,7 +136,6 @@ quotes: \fBmount -F smbfs "//SALES;george@RSERVER" /mnt\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fImount-point\fR\fR
 .ad
@@ -155,7 +153,6 @@ See the \fBmount\fR(1M) man page for the list of supported
 \fIgeneric-options\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIname\fR\fB=\fR\fIvalue\fR or\fR
 .ad
@@ -170,7 +167,6 @@ name-value pair as a list of comma-separated pairs. No spaces are permitted in
 the list. The properties are as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdirperms=\fR\fIoctaltriplet\fR\fR
 .ad
@@ -187,7 +183,6 @@ server.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfileperms=\fR\fIoctaltriplet\fR\fR
 .ad
@@ -202,7 +197,6 @@ server.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgid=\fR\fIgroupid\fR\fR
 .ad
@@ -214,7 +208,6 @@ the directory where the volume is mounted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBintr\fR|\fBnointr\fR\fR
 .ad
@@ -228,7 +221,6 @@ cancellation is normally allowed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnoprompt\fR\fR
 .ad
@@ -244,7 +236,6 @@ property is set, and no password is stored by the \fBsmbutil login\fR command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBretry_count=\fR\fInumber\fR\fR
 .ad
@@ -259,7 +250,6 @@ the global value set in SMF or the value set in your \fB\&.nsmbrc\fR file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtimeout=\fR\fIseconds\fR\fR
 .ad
@@ -273,7 +263,6 @@ global value set in SMF or the value set in your \fB\&.nsmbrc\fR file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBuid=\fR\fIuserid\fR\fR
 .ad
@@ -285,7 +274,6 @@ directory where the volume is mounted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBxattr\fR|\fBnoxattr\fR\fR
 .ad
@@ -302,7 +290,6 @@ use Solaris Extended attributes fail with EINVAL.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-O\fR\fR
 .ad
@@ -433,7 +420,6 @@ point. The following command line unmounts the share from the mount point.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mnttab\fR\fR
 .ad
@@ -444,7 +430,6 @@ Table of mounted file systems.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dfs/fstypes\fR\fR
 .ad
@@ -455,7 +440,6 @@ Default distributed file system type.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vfstab\fR\fR
 .ad
@@ -466,7 +450,6 @@ Table of automatically mounted resources.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB$HOME/.nsmbrc\fR\fR
 .ad
@@ -485,13 +468,12 @@ attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/mount_tmpfs.1m b/usr/src/man/man1m/mount_tmpfs.1m
index 7e8c9b6b2b..a4f38d3b1f 100644
--- a/usr/src/man/man1m/mount_tmpfs.1m
+++ b/usr/src/man/man1m/mount_tmpfs.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mount_tmpfs 1M "24 Nov 2003" "SunOS 5.11" "System Administration Commands"
+.TH MOUNT_TMPFS 1M "Nov 24, 2003"
 .SH NAME
 mount_tmpfs \- mount tmpfs file systems
 .SH SYNOPSIS
@@ -34,24 +34,20 @@ disregarded and assumed to be the virtual memory resources within the system.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIspecific_options\fR\fR
 .ad
 .RS 23n
-.rt  
 Specify \fBtmpfs\fR file system specific options in a comma-separated list with
 no intervening spaces. If invalid options are specified, a warning  message is
 printed and the invalid options are ignored. The following options are
 available:
 .sp
 .ne 2
-.mk
 .na
 \fBsize=\fIsz\fR\fR
 .ad
 .RS 19n
-.rt  
 The \fIsz\fR argument controls the size of this particular \fBtmpfs\fR file
 system. If the argument is has a `k' suffix, the number will be interpreted as
 a number of kilobytes. An `m' suffix will be interpreted as a number of
@@ -62,12 +58,10 @@ pagesize of the system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBxattr\fR | \fBnoxattr\fR\fR
 .ad
 .RS 19n
-.rt  
 Allow or disallow the creation and manipulation of extended attributes. The
 default is \fBxattr\fR. See \fBfsattr\fR(5) for a description of extended
 attributes.
@@ -77,12 +71,10 @@ attributes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-O\fR\fR
 .ad
 .RS 23n
-.rt  
 Overlay  mount. Allow the file system to be mounted over an existing mount
 point, making the underlying file system inaccessible. If a mount is attempted
 on a pre-existing mount point without setting this flag, the mount will fail,
@@ -92,12 +84,10 @@ producing the error\f(CWdevice busy\fR.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mnttab\fR\fR
 .ad
 .RS 15n
-.rt  
 Table of mounted file systems
 .RE
 
diff --git a/usr/src/man/man1m/mount_udfs.1m b/usr/src/man/man1m/mount_udfs.1m
index 8c3556e84c..564098ef90 100644
--- a/usr/src/man/man1m/mount_udfs.1m
+++ b/usr/src/man/man1m/mount_udfs.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mount_udfs 1M "12 May 2008" "SunOS 5.11" "System Administration Commands"
+.TH MOUNT_UDFS 1M "May 12, 2008"
 .SH NAME
 mount_udfs \- mount a udfs file system
 .SH SYNOPSIS
 .LP
 .nf
-\fBmount\fR \fB-F\fR udfs [\fIgeneric_options\fR] [\fB-o\fR \fIspecific_options\fR] 
+\fBmount\fR \fB-F\fR udfs [\fIgeneric_options\fR] [\fB-o\fR \fIspecific_options\fR]
      [\fB-O\fR] \fIspecial\fR \fImount_point\fR
 .fi
 
@@ -54,7 +54,6 @@ See \fBmount\fR(1M) for the list of supported \fIgeneric_options\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIspecific_options\fR\fR
 .ad
@@ -64,7 +63,6 @@ Specify \fBudfs\fR file system specific options in a comma-separated list with
 no intervening spaces. The following \fIspecific_options\fR are available:
 .sp
 .ne 2
-.mk
 .na
 \fBm\fR
 .ad
@@ -75,7 +73,6 @@ Mount the file system without making an entry in \fB/etc/mnttab\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBremount\fR
 .ad
@@ -92,7 +89,6 @@ fails if the file system is not currently mounted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-O\fR\fR
 .ad
@@ -107,7 +103,6 @@ producing the error \f(CWdevice busy\fR.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mnttab\fR\fR
 .ad
@@ -118,7 +113,6 @@ Table of mounted file systems
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vfstab\fR\fR
 .ad
@@ -136,7 +130,6 @@ List of default parameters for each file system
 .SH DIAGNOSTICS
 .sp
 .ne 2
-.mk
 .na
 \fBnot super user\fR
 .ad
@@ -147,7 +140,6 @@ The command is run by a non-root user. Run as root.
 
 .sp
 .ne 2
-.mk
 .na
 \fBno such device\fR
 .ad
@@ -158,7 +150,6 @@ The device name specified does not exist.
 
 .sp
 .ne 2
-.mk
 .na
 \fBnot a directory\fR
 .ad
@@ -169,7 +160,6 @@ The specified mount point is not a directory.
 
 .sp
 .ne 2
-.mk
 .na
 \fBis not an udfs file system\fR
 .ad
@@ -181,7 +171,6 @@ system module is not available.
 
 .sp
 .ne 2
-.mk
 .na
 \fBis already mounted\fR
 .ad
@@ -192,7 +181,6 @@ The specified device is already in use.
 
 .sp
 .ne 2
-.mk
 .na
 \fBnot a block device\fR
 .ad
@@ -203,7 +191,6 @@ The device specified is not a block device. Use block device to mount.
 
 .sp
 .ne 2
-.mk
 .na
 \fBwrite-protected\fR
 .ad
@@ -214,7 +201,6 @@ The device is read-only.
 
 .sp
 .ne 2
-.mk
 .na
 \fBis corrupted. needs checking\fR
 .ad
diff --git a/usr/src/man/man1m/mount_ufs.1m b/usr/src/man/man1m/mount_ufs.1m
index 5c8083694f..e910b7f87f 100644
--- a/usr/src/man/man1m/mount_ufs.1m
+++ b/usr/src/man/man1m/mount_ufs.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mount_ufs 1M "22 Jun 2009" "SunOS 5.11" "System Administration Commands"
+.TH MOUNT_UFS 1M "Jun 22, 2009"
 .SH NAME
 mount_ufs \- mount ufs file systems
 .SH SYNOPSIS
@@ -54,7 +54,6 @@ See \fBmount\fR(1M) for the list of supported \fIgeneric_options\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIspecific_options\fR\fR
 .ad
@@ -66,7 +65,6 @@ printed and the invalid options are ignored. The following options are
 available:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdfratime\fR | \fBnodfratime\fR\fR
 .ad
@@ -84,7 +82,6 @@ the disk is accessed - even if the file is not modified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBforcedirectio\fR | \fBnoforcedirectio\fR\fR
 .ad
@@ -102,7 +99,6 @@ The default behavior is \fBnoforcedirectio\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBglobal\fR | \fBnoglobal\fR\fR
 .ad
@@ -116,7 +112,6 @@ globally visible. The default behavior is \fBnoglobal\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBintr\fR | \fBnointr\fR\fR
 .ad
@@ -128,7 +123,6 @@ an operation on a locked file system. The default is \fBintr\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlargefiles\fR | \fBnolargefiles\fR\fR
 .ad
@@ -156,7 +150,6 @@ unsuccessful mount attempt indicates the presence of at least one large file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlogging\fR | \fBnologging\fR\fR
 .ad
@@ -210,7 +203,6 @@ log is totally flushed when the file system is unmounted or as a result of the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBm\fR\fR
 .ad
@@ -221,7 +213,6 @@ Mount the file system without making an entry in \fB/etc/mnttab\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnoatime\fR\fR
 .ad
@@ -243,7 +234,6 @@ The POSIX standard requires that access times be marked on files.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnosec\fR\fR
 .ad
@@ -257,7 +247,6 @@ on ACLs.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBonerror\fR = \fIaction\fR\fR
 .ad
@@ -272,7 +261,6 @@ forcibly unmounted, respectively. The default is \fBpanic\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBquota\fR\fR
 .ad
@@ -283,7 +271,6 @@ Quotas are turned on for the file system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremount\fR\fR
 .ad
@@ -295,7 +282,6 @@ set with \fBremount\fR revert to their default values.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrq\fR\fR
 .ad
@@ -308,7 +294,6 @@ Read-write with quotas turned on. Equivalent to \fBrw, quota\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBxattr\fR | \fBnoxattr\fR\fR
 .ad
@@ -321,7 +306,6 @@ attributes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-O\fR\fR
 .ad
@@ -357,7 +341,6 @@ In the preceding commands, the \fB-F\fR \fBufs\fR option is not necessary.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mnttab\fR\fR
 .ad
@@ -368,7 +351,6 @@ table of mounted file systems
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vfstab\fR\fR
 .ad
diff --git a/usr/src/man/man1m/mountall.1m b/usr/src/man/man1m/mountall.1m
index e83380769a..a581ba32eb 100644
--- a/usr/src/man/man1m/mountall.1m
+++ b/usr/src/man/man1m/mountall.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mountall 1M "17 Dec 2008" "SunOS 5.11" "System Administration Commands"
+.TH MOUNTALL 1M "Dec 17, 2008"
 .SH NAME
 mountall, umountall \- mount, unmount multiple file systems
 .SH SYNOPSIS
@@ -60,35 +60,29 @@ specified, \fBmountall\fR and \fBumountall\fR limit their actions to the
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fR
 .ad
 .RS 11n
-.rt  
 Specify the \fIFSType\fR of the file system to be mounted or unmounted.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIhost\fR\fR
 .ad
 .RS 11n
-.rt  
 Unmount all file systems listed in \fB/etc/mnttab\fR that are remote-mounted
 from host.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR\fR
 .ad
 .RS 11n
-.rt  
 Use the \fBfuser\fR \fB-k\fR \fImount-point\fR command. See the \fBfuser\fR(1M)
 for details. The \fB-k\fR option sends the \fBSIGKILL\fR signal to each process
 using the file. As this option spawns kills for each process, the kill messages
@@ -98,23 +92,19 @@ unmounts \fIbusy\fR file systems, even if the \fB-k\fR option is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 11n
-.rt  
 Limit the action to local file systems.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 11n
-.rt  
 List the actions that would be performed for the specified options, but do not
 actually execute these actions. Repeating the command without the \fB-n\fR
 option executes the listed actions, assuming that the \fB/etc/mnttab\fR file
@@ -123,34 +113,28 @@ has not changed in the interval prior to repeating the command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 11n
-.rt  
 Limit the action to remote file system types.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 11n
-.rt  
 Do not perform the \fBumount\fR operation in parallel.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Z\fR\fR
 .ad
 .RS 11n
-.rt  
 Apply the action(s) only to the file systems  mounted in non-global zones. By
 default, \fBumountall\fR unmounts only file systems mounted in the current
 zone. Option \fB-Z\fR is ignored if used in a non-global zone.
@@ -159,7 +143,6 @@ zone. Option \fB-Z\fR is ignored if used in a non-global zone.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mnttab\fR\fR
 .ad
@@ -170,7 +153,6 @@ Mounted file system table
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vfstab\fR\fR
 .ad
@@ -181,7 +163,6 @@ Table of file system defaults
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/fs/\fIFSType\fR/fsckall\fR\fR
 .ad
@@ -199,15 +180,14 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 _
-Output StabilityUncommitted
+Output Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/mountd.1m b/usr/src/man/man1m/mountd.1m
index 772b292d8c..167ab98a27 100644
--- a/usr/src/man/man1m/mountd.1m
+++ b/usr/src/man/man1m/mountd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mountd 1M "27 Apr 2005" "SunOS 5.11" "System Administration Commands"
+.TH MOUNTD 1M "Apr 27, 2005"
 .SH NAME
 mountd \- server for NFS mount requests and NFS access checks
 .SH SYNOPSIS
@@ -42,24 +42,20 @@ The options shown below are supported for NVSv2/v3 clients. They are not
 supported for Solaris NFSv4 clients.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 6n
-.rt  
 Reject mount requests from clients. Clients that have file systems mounted will
 not be affected.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 Run the command in verbose mode. Each time \fBmountd\fR determines what access
 a client should get, it will log the result to the console, as well as how it
 got that result.
@@ -68,12 +64,10 @@ got that result.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dfs/sharetab\fR\fR
 .ad
 .RS 21n
-.rt  
 shared file system table
 .RE
 
diff --git a/usr/src/man/man1m/mpathadm.1m b/usr/src/man/man1m/mpathadm.1m
index 40c8bcd356..aa1b0a88c5 100644
--- a/usr/src/man/man1m/mpathadm.1m
+++ b/usr/src/man/man1m/mpathadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mpathadm 1M "4 May 2009" "SunOS 5.11" "System Administration Commands"
+.TH MPATHADM 1M "May 4, 2009"
 .SH NAME
 mpathadm \- multipath discovery and administration
 .SH SYNOPSIS
@@ -29,78 +29,64 @@ The \fBmpathadm\fR command supports the following subcommands, which are
 described in detail in subsections that follow.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist\fR\fR
 .ad
 .RS 12n
-.rt  
 Display a list of discovered instances for a given object.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshow\fR\fR
 .ad
 .RS 12n
-.rt  
 Display information about a given object instance.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmodify\fR\fR
 .ad
 .RS 12n
-.rt  
 Modify properties of an object.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBenable\fR\fR
 .ad
 .RS 12n
-.rt  
 Enable an object.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisable\fR\fR
 .ad
 .RS 12n
-.rt  
 Disable an object.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfailover\fR\fR
 .ad
 .RS 12n
-.rt  
 Cause target port group failover for a logical-unit.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBoverride\fR\fR
 .ad
 .RS 12n
-.rt  
 Set a path to be used over other paths on a logical-unit.
 .RE
 
@@ -124,7 +110,6 @@ The syntax for the \fBlist\fR subcommand is:
 The \fBlist\fR subcommand displays data for following direct-objects:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmpath-support\fR [\fImpath-support-name\fR, ...]\fR
 .ad
@@ -138,7 +123,6 @@ registered multipathing support libraries will be displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinitiator-port\fR [\fIinitiator-port-name\fR, ...]\fR
 .ad
@@ -151,7 +135,6 @@ displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB{\fBlogical-unit\fR | \fBlu\fR} [\fIoptions\fR]
 [\fIlogical-unit-name\fR, ...]\fR
@@ -164,7 +147,6 @@ is specified, all discovered logical-units will be displayed.
 Options for \fBlist logical-unit\fR are as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR, \fB-\fR\fB-name\fR \fIname\fR\fR
 .ad
@@ -177,7 +159,6 @@ command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB-\fR\fB-target-port\fR \fItarget-port-name\fR\fR
 .ad
@@ -206,7 +187,6 @@ The \fBshow\fR subcommand displays detailed information for following the
 direct-objects:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmpath-support\fR [\fImpath-support-name\fR, ...]\fR
 .ad
@@ -220,7 +200,6 @@ output.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinitiator-port\fR
 \fIinitiator-port-name\fR[,\fIinitiator-port-name\fR, ...]\fR
@@ -232,7 +211,6 @@ Show the detailed information for the given \fIinitiator-port-name\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB{\fBlogical-unit\fR | \fBlu\fR} [\fIlogical-unit-name\fR, ...]\fR
 .ad
@@ -263,7 +241,6 @@ The \fBmodify\fR subcommand modifies characteristics of the following
 direct-objects:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmpath-support\fR [\fIoptions\fR] \fImpath-support-name\fR, ...\fR
 .ad
@@ -273,7 +250,6 @@ Configuration management of an \fImpath-support\fR. Options to modify
 mpath-support are as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR, \fB-\fR\fB-autofailback\fR on | off\fR
 .ad
@@ -285,7 +261,6 @@ failback support.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR, \fB-\fR\fB-autoprobe\fR on | off\fR
 .ad
@@ -297,7 +272,6 @@ support.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR, \fB-\fR\fB-loadbalance\fR loadbalance-type\fR
 .ad
@@ -311,7 +285,6 @@ supported types listed in the \fBshow mpath-support\fR output.
 
 .sp
 .ne 2
-.mk
 .na
 \fB{\fBlogical-unit\fR | \fBlu\fR} [\fIoptions\fR]
 \fIlogical-unit-name\fR, ...\fR
@@ -322,7 +295,6 @@ Configuration management of a logical unit. Options to modify
 \fBlogical-unit\fR are as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR, \fB-\fR\fB-autofailback\fR on | off\fR
 .ad
@@ -334,7 +306,6 @@ failback support
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR, \fB-\fR\fB-autoprobe\fR on | off\fR
 .ad
@@ -346,7 +317,6 @@ probing support.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR, \fB-\fR\fB-loadbalance\fR loadbalance-type\fR
 .ad
@@ -375,7 +345,6 @@ The \fBenable\fR subcommand supports the following direct-objects to be
 enabled:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpath\fR \fB-i\fR \fIinitiator-port-name\fR \fB-t\fR
 \fItarget-port-name\fR\fR
@@ -407,7 +376,6 @@ The \fBdisable\fR subcommand supports the following direct-objects to be
 disabled:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpath\fR \fB-i\fR \fIinitiator-port-name\fR \fB-t\fR
 \fItarget-port-name\fR\fR
@@ -439,7 +407,6 @@ The \fBfailover\fR subcommand supports failover for the following
 direct-objects:
 .sp
 .ne 2
-.mk
 .na
 \fB{\fBlogical-unit\fR | \fBlu\fR} \fIlogical-unit-name\fR\fR
 .ad
@@ -468,7 +435,6 @@ The \fBoverride\fR subcommand controls whether or not the following
 direct-objects override another:
 .sp
 .ne 2
-.mk
 .na
 \fBpath {\fB-i\fR \fIinitiator-port-name\fR \fB-t\fR \fItarget-port-name\fR |
 \fB-c\fR}\fR
@@ -489,7 +455,6 @@ disabled.
 Options for override path are as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR, \fB-\fR\fB-initiator-port\fR \fIinitiator-port-name\fR\fR
 .ad
@@ -501,7 +466,6 @@ must also be included.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB-\fR\fB-target-port\fR \fItarget-port-name\fR\fR
 .ad
@@ -513,7 +477,6 @@ also be included.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR, \fB-\fR\fB-logical-unit\fR \fIlogical-unit\fR\fR
 .ad
@@ -525,7 +488,6 @@ must also be included.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR, \fB-\fR\fB-cancel\fR\fR
 .ad
@@ -543,23 +505,19 @@ also be included.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR, \fB-\fR\fB-version\fR\fR
 .ad
 .RS 17n
-.rt  
 Display the version information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-?\fR, \fB-\fR\fB-help\fR\fR
 .ad
 .RS 17n
-.rt  
 Display context help. Can be used following an \fBmpathadm\fR command with no
 arguments, following a subcommand, or following a subcommand direct-object
 combination. Responds with help information appropriate for your entry. For
@@ -762,13 +720,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/mpstat.1m b/usr/src/man/man1m/mpstat.1m
index a06bbf4602..c279136865 100644
--- a/usr/src/man/man1m/mpstat.1m
+++ b/usr/src/man/man1m/mpstat.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mpstat 1M "23 Mar 2009" "SunOS 5.11" "System Administration Commands"
+.TH MPSTAT 1M "Mar 23, 2009"
 .SH NAME
 mpstat \- report per-processor or per-processor-set statistics
 .SH SYNOPSIS
@@ -42,12 +42,10 @@ output, in one of the following forms:
 The \fBmpstat\fR command reports the following information:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCPU\fR or \fBSET\fR\fR
 .ad
 .RS 14n
-.rt  
 Without the \fB-a\fR option, \fBmpstat\fR reports \fBCPU\fR statistics for a
 processor ID. With the \fB-a\fR option, \fBmpstat\fR reports \fBSET\fR
 statistics for a processor set ID.
@@ -55,189 +53,155 @@ statistics for a processor set ID.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBminf\fR\fR
 .ad
 .RS 14n
-.rt  
 minor faults
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmjf\fR\fR
 .ad
 .RS 14n
-.rt  
 major faults
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBxcal\fR\fR
 .ad
 .RS 14n
-.rt  
 inter-processor cross-calls
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBintr\fR\fR
 .ad
 .RS 14n
-.rt  
 interrupts
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBithr\fR\fR
 .ad
 .RS 14n
-.rt  
 interrupts as threads (not counting clock interrupt)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcsw\fR\fR
 .ad
 .RS 14n
-.rt  
 context switches
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBicsw\fR\fR
 .ad
 .RS 14n
-.rt  
 involuntary context switches
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmigr\fR\fR
 .ad
 .RS 14n
-.rt  
 thread migrations (to another processor)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsmtx\fR\fR
 .ad
 .RS 14n
-.rt  
 spins on mutexes (lock not acquired on first try)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsrw\fR\fR
 .ad
 .RS 14n
-.rt  
 spins on readers/writer locks (lock not acquired on first try)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsyscl\fR\fR
 .ad
 .RS 14n
-.rt  
 system calls
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBusr\fR\fR
 .ad
 .RS 14n
-.rt  
 percent user time
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsys\fR\fR
 .ad
 .RS 14n
-.rt  
 percent system time
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwt\fR\fR
 .ad
 .RS 14n
-.rt  
 the I/O wait time is no longer calculated as a percentage of \fBCPU\fR time,
 and this statistic will always return zero.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBidl\fR\fR
 .ad
 .RS 14n
-.rt  
 percent idle time
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsze\fR\fR
 .ad
 .RS 14n
-.rt  
 number of processors in the requested processor set
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBset\fR\fR
 .ad
 .RS 14n
-.rt  
 processor set membership of each \fBCPU\fR
 .RE
 
@@ -247,58 +211,48 @@ processor set membership of each \fBCPU\fR
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 13n
-.rt  
 Aggregate output by processor set. Sort the output by set. The default output
 is sorted by \fBCPU\fR number.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 13n
-.rt  
 Report processor set membership of each \fBCPU\fR. Sort the output by set. The
 default output is sorted by \fBCPU\fR number.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIset\fR\fR
 .ad
 .RS 13n
-.rt  
 Display only those processors in the specified \fIset\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
 .RS 13n
-.rt  
 Suppress messages related to state changes.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fBu\fR |  \fBd\fR\fR
 .ad
 .RS 13n
-.rt  
 Specify \fBu\fR for a printed representation of the internal representation of
 time. See \fBtime\fR(2). Specify \fBd\fR for standard date format. See
 \fBdate\fR(1).
@@ -306,23 +260,19 @@ time. See \fBtime\fR(2). Specify \fBd\fR for standard date format. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIinterval\fR\fR
 .ad
 .RS 13n
-.rt  
 Report once each \fIinterval\fR seconds.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcount\fR\fR
 .ad
 .RS 13n
-.rt  
 Only print \fIcount\fR reports.
 .RE
 
@@ -365,13 +315,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/msgid.1m b/usr/src/man/man1m/msgid.1m
index 6d47f25120..df300bd680 100644
--- a/usr/src/man/man1m/msgid.1m
+++ b/usr/src/man/man1m/msgid.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH msgid 1M "9 Oct 1998" "SunOS 5.11" "System Administration Commands"
+.TH MSGID 1M "Oct 9, 1998"
 .SH NAME
 msgid \- generate message IDs
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/msgid\fR 
+\fB/usr/sbin/msgid\fR
 .fi
 
 .SH DESCRIPTION
@@ -58,7 +58,7 @@ messages in the binary \fBufs\fR, to generate a message catalog.
 .nf
 example# \fBstrings /kernel/fs/ufs | msgid\fR
 
-137713 free: 
+137713 free:
     freeing free frag, dev:0x%lx, blk:%ld, cg:%d, ino:%lu, fs:%s
 567420 ialloccg: block not in mapfs = %s
 845546 alloc: %s: file system full
diff --git a/usr/src/man/man1m/mvdir.1m b/usr/src/man/man1m/mvdir.1m
index f7367fe91f..b786b2c3f5 100644
--- a/usr/src/man/man1m/mvdir.1m
+++ b/usr/src/man/man1m/mvdir.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH mvdir 1M "14 Mar 1997" "SunOS 5.11" "System Administration Commands"
+.TH MVDIR 1M "Mar 14, 1997"
 .SH NAME
 mvdir \- move a directory
 .SH SYNOPSIS
@@ -35,24 +35,20 @@ is not.
 .SH OPERANDS
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdirname\fR\fR
 .ad
 .RS 11n
-.rt  
 The name of the directory that is to be moved to another directory in the
 filesystem.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIname\fR\fR
 .ad
 .RS 11n
-.rt  
 The name of the directory into which \fBdirname\fR is to be moved. If
 \fIname\fR does not exist, it will be created. It may not be on the same path
 as \fBdirname\fR.
@@ -66,23 +62,19 @@ encountering files greater than or equal to 2 Gbyte ( 2^31 bytes).
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful operation.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 Operation failed.
 .RE
 
diff --git a/usr/src/man/man1m/ncaconfd.1m b/usr/src/man/man1m/ncaconfd.1m
index 20489dbba8..40a87cb0ff 100644
--- a/usr/src/man/man1m/ncaconfd.1m
+++ b/usr/src/man/man1m/ncaconfd.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ncaconfd 1M "12 Oct 2004" "SunOS 5.11" "System Administration Commands"
+.TH NCACONFD 1M "Oct 12, 2004"
 .SH NAME
 ncaconfd \- Solaris Network Cache and Accelerator (NCA) configuration daemon
 .SH SYNOPSIS
@@ -32,36 +32,30 @@ interface NCA should use to make active outgoing TCP connnections.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 Enable active connections.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 6n
-.rt  
 Enable logging.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/nca/ncakmod.conf\fR\fR
 .ad
 .RS 25n
-.rt  
- 
+
 .RE
 
 .SH ATTRIBUTES
@@ -72,13 +66,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ncheck.1m b/usr/src/man/man1m/ncheck.1m
index d7a0b2d11a..2e873216a1 100644
--- a/usr/src/man/man1m/ncheck.1m
+++ b/usr/src/man/man1m/ncheck.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ncheck 1M "30 May 2001" "SunOS 5.11" "System Administration Commands"
+.TH NCHECK 1M "May 30, 2001"
 .SH NAME
 ncheck \- generate a list of path names versus i-numbers
 .SH SYNOPSIS
 .LP
 .nf
-\fBncheck\fR [\fB-F\fR \fIFSType\fR] [\fB-V\fR] [\fIgeneric_options\fR] 
+\fBncheck\fR [\fB-F\fR \fIFSType\fR] [\fB-V\fR] [\fIgeneric_options\fR]
      [\fB-o\fR \fIFSType-specific_options\fR] [\fIspecial\fR]...
 .fi
 
@@ -24,12 +24,10 @@ system exists.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fR
 .ad
 .RS 19n
-.rt  
 Specify the  \fIFSType\fR on which to operate. The  \fIFSType\fR should either
 be specified here  or be determinable from \fB/etc/vfstab\fR by finding an
 entry in the table that has a numeric  \fBfsckpass\fR field and an
@@ -38,12 +36,10 @@ entry in the table that has a numeric  \fBfsckpass\fR field and an
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
 .RS 19n
-.rt  
 Echo the complete command line, but do not execute the command. The command
 line is generated by using the options and arguments provided by the user and
 adding to them information derived from  \fB/etc/vfstab\fR. This option may be
@@ -52,45 +48,37 @@ used to verify and validate the command line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIgeneric_options\fR\fR
 .ad
 .RS 19n
-.rt  
 Options that are commonly supported by most FSType-specific command modules.
 The following options are available:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fI i-list\fR\fR
 .ad
 .RS 13n
-.rt  
 Limit the report to the files on the  \fIi-list\fR that follows. The
 \fIi-list\fR must be separated by commas with no intervening spaces.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 13n
-.rt  
 Print the names "." and ".\|." which are ordinarily suppressed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 13n
-.rt  
 Report only special files and files with set-user-ID mode. This option may be
 used to detect violations of security policy.
 .RE
@@ -99,12 +87,10 @@ used to detect violations of security policy.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 19n
-.rt  
 Specify  \fIFSType-specific_options\fR in a comma separated (without spaces)
 list of suboptions and keyword-attribute pairs for interpretation by the
 FSType-specific module of the command.
@@ -118,12 +104,10 @@ encountering files greater than or equal to 2 Gbyte ( 2^31 bytes).
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vfstab\fR\fR
 .ad
 .RS 15n
-.rt  
 list of default parameters for each file system
 .RE
 
diff --git a/usr/src/man/man1m/ncheck_ufs.1m b/usr/src/man/man1m/ncheck_ufs.1m
index e32529b0f0..ab5047305e 100644
--- a/usr/src/man/man1m/ncheck_ufs.1m
+++ b/usr/src/man/man1m/ncheck_ufs.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ncheck_ufs 1M "18 Dec 1991" "SunOS 5.11" "System Administration Commands"
+.TH NCHECK_UFS 1M "Dec 18, 1991"
 .SH NAME
 ncheck_ufs \- generate pathnames versus i-numbers for ufs file systems
 .SH SYNOPSIS
@@ -24,21 +24,17 @@ directory files are followed by `\fB/.\fR'.
 See \fBncheck\fR(1M) for the list of \fIgeneric_options\fR supported.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 6n
-.rt  
 Specify \fBufs\fR file system specific options. The available option is:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBm\fR\fR
 .ad
 .RS 5n
-.rt  
 Print mode information.
 .RE
 
diff --git a/usr/src/man/man1m/ndd.1m b/usr/src/man/man1m/ndd.1m
index e9ce087d3d..ffa5b604e6 100644
--- a/usr/src/man/man1m/ndd.1m
+++ b/usr/src/man/man1m/ndd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ndd 1M "13 Mar 2009" "SunOS 5.11" "System Administration Commands"
+.TH NDD 1M "Mar 13, 2009"
 .SH NAME
 ndd \- get and set driver configuration parameters
 .SH SYNOPSIS
diff --git a/usr/src/man/man1m/ndmpadm.1m b/usr/src/man/man1m/ndmpadm.1m
index c61eee3bdc..0e0d2df540 100644
--- a/usr/src/man/man1m/ndmpadm.1m
+++ b/usr/src/man/man1m/ndmpadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ndmpadm 1M "24 Jun 2009" "SunOS 5.11" "System Administration Commands"
+.TH NDMPADM 1M "Jun 24, 2009"
 .SH NAME
 ndmpadm \- administer Network Data Management Protocol activities
 .SH SYNOPSIS
@@ -27,7 +27,6 @@ along with the subcommand.
 The \fBndmpadm\fR command supports the following subcommands:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisable\fR\fR
 .ad
@@ -38,7 +37,6 @@ Disable the specified authentication password handling.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBenable\fR\fR
 .ad
@@ -49,7 +47,6 @@ Enable the specified authentication password handling.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBget\fR\fR
 .ad
@@ -60,7 +57,6 @@ Get the value of an NDMP configuration property.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBkill-sessions\fR\fR
 .ad
@@ -71,7 +67,6 @@ Terminate an active session.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBset\fR\fR
 .ad
@@ -82,7 +77,6 @@ Set the value of an NDMP configuration property.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshow-devices\fR\fR
 .ad
@@ -93,7 +87,6 @@ Get a list of tape devices connected to the server.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshow-sessions\fR\fR
 .ad
@@ -108,12 +101,10 @@ Display the details of active NDMP sessions.
 The following option is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-?\fR\fR
 .ad
 .RS 6n
-.rt  
 Display a list of all subcommands and options.
 .RE
 
@@ -239,7 +230,6 @@ for the \fBshow-sessions\fR subcommand is:
 The \fBshow-sessions\fR subcommand supports the following arguments:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fBtape\fR,\fBscsi\fR,\fBdata\fR,\fBmover\fR\fR
 .ad
@@ -252,7 +242,6 @@ interfaces.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIID\fR\fR
 .ad
@@ -396,35 +385,29 @@ The following command disables clear text password authentication.
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 An error occurred, such as the \fBndmpd\fR daemon is not running, that
 prevented \fBndmpadm\fR from contacting the demon.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Invalid command-line options were specified.
 .RE
 
@@ -436,13 +419,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ndmpd.1m b/usr/src/man/man1m/ndmpd.1m
index ce490f2088..ae587f1d9c 100644
--- a/usr/src/man/man1m/ndmpd.1m
+++ b/usr/src/man/man1m/ndmpd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ndmpd 1M "27 Apr 2009" "SunOS 5.11" "System Administration Commands"
+.TH NDMPD 1M "Apr 27, 2009"
 .SH NAME
 ndmpd \- Network Data Management Protocol daemon
 .SH SYNOPSIS
@@ -30,7 +30,6 @@ By default, \fBndmpd\fR is disabled.
 The following option is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -42,42 +41,35 @@ Debugging mode; log file will be created.
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 An error occurred that prevented the \fBndmpd\fR daemon from initializing, such
 as failure to fork a process, mutex initialization.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Invalid command-line options were specified.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/ndmp/ndmpd\fR\fR
 .ad
@@ -88,7 +80,6 @@ Network data management protocol server binary.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/ndmp/ndmp.log\fR\fR
 .ad
@@ -100,7 +91,6 @@ reboot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/ndmp/dumpdates\fR\fR
 .ad
@@ -118,13 +108,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ndmpstat.1m b/usr/src/man/man1m/ndmpstat.1m
index 7b7c56eb5d..6f47540195 100644
--- a/usr/src/man/man1m/ndmpstat.1m
+++ b/usr/src/man/man1m/ndmpstat.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ndmpstat 1M "21 Jun 2007" "SunOS 5.11" "System Administration Commands"
+.TH NDMPSTAT 1M "Jun 21, 2007"
 .SH NAME
 ndmpstat \- show NDMP backup progress statistics
 .SH SYNOPSIS
@@ -33,7 +33,6 @@ NDMP daemon activity since the NDMP service was invoked.
 The fields in \fBndmpstat\fR output are described as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwthr\fR\fR
 .ad
@@ -42,7 +41,6 @@ The fields in \fBndmpstat\fR output are described as follows:
 Report the number of worker threads in each  of  the four following states:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBr\fR\fR
 .ad
@@ -53,7 +51,6 @@ the number of worker threads running
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBw\fR\fR
 .ad
@@ -65,7 +62,6 @@ and paging
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBb\fR\fR
 .ad
@@ -76,7 +72,6 @@ the number of backup operations currently running
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBr\fR\fR
 .ad
@@ -89,7 +84,6 @@ the number of restore operations currently running
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfile\fR\fR
 .ad
@@ -98,7 +92,6 @@ the number of restore operations currently running
 Report on usage of filesystem.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrd\fR\fR
 .ad
@@ -109,7 +102,6 @@ the number of files being read
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwr\fR\fR
 .ad
@@ -122,7 +114,6 @@ the number of files being written
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisk\fR\fR
 .ad
@@ -131,7 +122,6 @@ the number of files being written
 Report the number of disk operations per interval.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrd\fR\fR
 .ad
@@ -142,7 +132,6 @@ the number of disk blocks being read
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwr\fR\fR
 .ad
@@ -155,7 +144,6 @@ the number of disk blocks being written
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtape\fR\fR
 .ad
@@ -166,7 +154,6 @@ four tapes, labeled with a single number. The number indicates the name of the
 device under \fB/dev/rmt\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrd\fR\fR
 .ad
@@ -177,7 +164,6 @@ the number of tape blocks being read
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwr\fR\fR
 .ad
@@ -190,7 +176,6 @@ the number of tape blocks being written
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbytes\fR\fR
 .ad
@@ -200,7 +185,6 @@ Report the number of bytes transferred. This is the aggregate value of both
 tape and disk devices. The number is in kilobytes.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrd\fR\fR
 .ad
@@ -211,7 +195,6 @@ the number of kilobytes being read
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwr\fR\fR
 .ad
@@ -224,7 +207,6 @@ the number of kilobytes being written
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBperf\fR\fR
 .ad
@@ -234,7 +216,6 @@ Displays a rough estimate of performance of the backup/restore operation in
 megabytes per second.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbk\fR\fR
 .ad
@@ -245,7 +226,6 @@ backup performance
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrs\fR\fR
 .ad
@@ -258,7 +238,6 @@ restore performance
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprcnt\fR\fR
 .ad
@@ -267,7 +246,6 @@ restore performance
 Display the comparative usage of resources, in percent.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdsk\fR\fR
 .ad
@@ -278,7 +256,6 @@ disk I/O time
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtpe\fR\fR
 .ad
@@ -289,7 +266,6 @@ tape I/O time
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBotr\fR\fR
 .ad
@@ -309,23 +285,19 @@ See \fBEXAMPLES\fR.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcount\fR\fR
 .ad
 .RS 12n
-.rt  
 Specifies the number of times that the statistics display is repeated.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fItape\fR\fR
 .ad
 .RS 12n
-.rt  
 Specifies which tapes are to be given priority in the output. A command line is
 limited to a maximum of four tape devices. A common tape name is
 \fB/dev/rmt/\fR\fIn\fR, where \fIn\fR is an integer.
@@ -333,12 +305,10 @@ limited to a maximum of four tape devices. A common tape name is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIinterval\fR\fR
 .ad
 .RS 12n
-.rt  
 Specifies the number of seconds over which \fBndmpstat\fR summarizes activity.
 The specified interval remains in effect till the command is terminated.
 .RE
@@ -377,13 +347,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below
+Interface Stability	See below
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/netstat.1m b/usr/src/man/man1m/netstat.1m
index 5859adea18..0ade14bb79 100644
--- a/usr/src/man/man1m/netstat.1m
+++ b/usr/src/man/man1m/netstat.1m
@@ -2,7 +2,7 @@
 .\" Copyright (C) 2002, Sun Microsystems, Inc. All Rights Reserved
 .\" Copyright 1989 AT&T
 .\" Copyright (c) 1983 Regents of the University of California. All rights reserved. The Berkeley software License Agreement specifies the terms and conditions for redistribution.
-.TH netstat 1M "16 Jun 2009" "SunOS 5.11" "System Administration Commands"
+.TH NETSTAT 1M "Jun 16, 2009"
 .SH NAME
 netstat \- show network status
 .SH SYNOPSIS
@@ -23,7 +23,7 @@ netstat \- show network status
 
 .LP
 .nf
-\fBnetstat\fR \fB-s\fR [\fB-f\fR \fIaddress_family\fR] [\fB-P\fR \fIprotocol\fR] 
+\fBnetstat\fR \fB-s\fR [\fB-f\fR \fIaddress_family\fR] [\fB-P\fR \fIprotocol\fR]
      [\fB-T\fR u | d ] [\fIinterval\fR [\fIcount\fR]]
 .fi
 
@@ -34,7 +34,7 @@ netstat \- show network status
 
 .LP
 .nf
-\fBnetstat\fR \fB-i\fR [\fB-I\fR \fIinterface\fR] [\fB-an\fR] [\fB-f\fR \fIaddress_family\fR] 
+\fBnetstat\fR \fB-i\fR [\fB-I\fR \fIinterface\fR] [\fB-an\fR] [\fB-f\fR \fIaddress_family\fR]
      [\fB-T\fR u | d ] [\fIinterval\fR [\fIcount\fR]]
 .fi
 
@@ -118,7 +118,6 @@ by the \fB-f\fR option.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -132,7 +131,6 @@ default routes are shown and only the status of physical interfaces is shown.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIaddress_family\fR\fR
 .ad
@@ -142,34 +140,28 @@ Limit all displays to those of the specified \fIaddress_family\fR. The value of
 \fIaddress_family\fR can be one of the following:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinet\fR\fR
 .ad
 .RS 9n
-.rt  
 For the \fBAF_INET\fR address family showing IPv4 information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinet6\fR\fR
 .ad
 .RS 9n
-.rt  
 For the \fBAF_INET6\fR address family showing IPv6 information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunix\fR\fR
 .ad
 .RS 9n
-.rt  
 For the \fBAF_UNIX\fR address family.
 .RE
 
@@ -177,7 +169,6 @@ For the \fBAF_UNIX\fR address family.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfilter\fR\fR
 .ad
@@ -188,7 +179,6 @@ filter. A filter rule consists of a \fIkeyword\fR:\fIvalue\fR pair. The known
 keywords and the value syntax are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaf:\fR{\fBinet\fR|\fBinet6\fR|\fBunix\fR|\fInumber\fR}\fR
 .ad
@@ -200,7 +190,6 @@ and both syntaxes are supported.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBoutif\fR:{\fIname\fR|\fIifIndex\fR|\fBany\fR|\fBnone\fR}\fR
 .ad
@@ -216,7 +205,6 @@ interface with the \fB-a\fR option of \fBifconfig\fR(1M).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdst\fR:{\fIip-address\fR[/\fImask\fR]|\fBany\fR|\fBnone\fR}\fR
 .ad
@@ -230,7 +218,6 @@ address 0 is selected.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBflags:\fR[\fB+ -\fR]?[\fBABDGHLMSU\fR]\fB+\fR\fR
 .ad
@@ -259,7 +246,6 @@ length 8 or greater, and an output interface of either \fBhme0\fR or
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR\fR
 .ad
@@ -272,7 +258,6 @@ DISPLAYS, below.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
@@ -286,7 +271,6 @@ See \fBifconfig\fR(1M).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
@@ -297,7 +281,6 @@ Show the STREAMS memory statistics.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -309,7 +292,6 @@ symbols. This option may be used with any of the display formats.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
@@ -320,7 +302,6 @@ Show the net to media tables. See DISPLAYS, below.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -335,7 +316,6 @@ although the kernel will derive such an entry if needed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
@@ -349,7 +329,6 @@ statistics global to the system. See DISPLAYS, below.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fBu\fR | \fBd\fR\fR
 .ad
@@ -364,7 +343,6 @@ time. See \fBtime\fR(2). Specify \fBd\fR for standard date format. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -376,7 +354,6 @@ statistics, routing table, and multicast group memberships.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR \fIinterface\fR\fR
 .ad
@@ -390,7 +367,6 @@ for physical interfaces are displayed. When this option is combined with the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR\fR
 .ad
@@ -402,7 +378,6 @@ multicast routing statistics instead.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIprotocol\fR\fR
 .ad
@@ -417,7 +392,6 @@ accepts protocol options only as all lowercase.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
@@ -428,7 +402,6 @@ Show the status of \fBDHCP\fR configured interfaces.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR\fR
 .ad
@@ -459,23 +432,19 @@ The following flags can be appended to the socket's "State" output:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBP\fR\fR
 .ad
 .RS 5n
-.rt  
 The socket is a MLP on zone-private IP addresses.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBS\fR\fR
 .ad
 .RS 5n
-.rt  
 The socket is a MLP on IP addresses shared between zones.
 .RE
 
@@ -487,12 +456,10 @@ The socket is a MLP on IP addresses shared between zones.
 .SH OPERANDS
 .sp
 .ne 2
-.mk
 .na
 \fB\fIinterval\fR\fR
 .ad
 .RS 12n
-.rt  
 Display statistics accumulated since last display every \fIinterval\fR seconds,
 repeating forever, unless \fIcount\fR is specified. When invoked with
 \fIinterval\fR, the first row of netstat output shows statistics accumulated
@@ -505,12 +472,10 @@ each interval.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcount\fR\fR
 .ad
 .RS 12n
-.rt  
 Display interface statistics the number of times specified by \fIcount\fR, at
 the interval specified by \fIinterval\fR.
 .RE
@@ -570,144 +535,118 @@ addresses.
 The possible state values for \fBTCP\fR sockets are as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBBOUND\fR\fR
 .ad
 .RS 16n
-.rt  
 Bound, ready to connect or listen.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCLOSED\fR\fR
 .ad
 .RS 16n
-.rt  
 Closed. The socket is not being used.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCLOSING\fR\fR
 .ad
 .RS 16n
-.rt  
 Closed, then remote shutdown; awaiting acknowledgment.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCLOSE_WAIT\fR\fR
 .ad
 .RS 16n
-.rt  
 Remote shutdown; waiting for the socket to close.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBESTABLISHED\fR\fR
 .ad
 .RS 16n
-.rt  
 Connection has been established.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFIN_WAIT_1\fR\fR
 .ad
 .RS 16n
-.rt  
 Socket closed; shutting down connection.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFIN_WAIT_2\fR\fR
 .ad
 .RS 16n
-.rt  
 Socket closed; waiting for shutdown from remote.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBIDLE\fR\fR
 .ad
 .RS 16n
-.rt  
 Idle, opened but not bound.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLAST_ACK\fR\fR
 .ad
 .RS 16n
-.rt  
 Remote shutdown, then closed; awaiting acknowledgment.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLISTEN\fR\fR
 .ad
 .RS 16n
-.rt  
 Listening for incoming connections.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSYN_RECEIVED\fR\fR
 .ad
 .RS 16n
-.rt  
 Initial synchronization of the connection under way.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSYN_SENT\fR\fR
 .ad
 .RS 16n
-.rt  
 Actively trying to establish connection.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTIME_WAIT\fR\fR
 .ad
 .RS 16n
-.rt  
 Wait after close for remote shutdown retransmission.
 .RE
 
@@ -717,104 +656,86 @@ Wait after close for remote shutdown retransmission.
 The possible state values for SCTP sockets are as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCLOSED\fR\fR
 .ad
 .RS 21n
-.rt  
 Closed. The socket is not being used.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLISTEN\fR\fR
 .ad
 .RS 21n
-.rt  
 Listening for incoming associations.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBESTABLISHED\fR\fR
 .ad
 .RS 21n
-.rt  
 Association has been established.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCOOKIE_WAIT\fR\fR
 .ad
 .RS 21n
-.rt  
 \fBINIT\fR has been sent to the peer, awaiting acknowledgment.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCOOKIE_ECHOED\fR\fR
 .ad
 .RS 21n
-.rt  
 State cookie from the INIT-ACK has been sent to the peer, awaiting
 acknowledgement.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSHUTDOWN_PENDING\fR\fR
 .ad
 .RS 21n
-.rt  
 \fBSHUTDOWN\fR has been received from the upper layer, awaiting acknowledgement
 of all outstanding \fBDATA\fR from the peer.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSHUTDOWN_SENT\fR\fR
 .ad
 .RS 21n
-.rt  
 All outstanding data has been acknowledged in the \fBSHUTDOWN_SENT\fR state.
 \fBSHUTDOWN\fR has been sent to the peer, awaiting acknowledgement.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSHUTDOWN_RECEIVED\fR\fR
 .ad
 .RS 21n
-.rt  
 \fBSHUTDOWN\fR has been received from the peer, awaiting acknowledgement of all
 outstanding \fBDATA\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSHUTDOWN_ACK_SENT\fR\fR
 .ad
 .RS 21n
-.rt  
 All outstanding data has been acknowledged in the \fBSHUTDOWN_RECEIVED\fR
 state. \fBSHUTDOWN_ACK\fR has been sent to the peer.
 .RE
@@ -826,46 +747,38 @@ The form of the display depends upon which of the \fB-g\fR, \fB-m\fR, \fB-p\fR,
 or \fB-s\fR options you select.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR\fR
 .ad
 .RS 6n
-.rt  
 Displays the list of multicast group membership.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
 .RS 6n
-.rt  
 Displays the memory usage, for example, STREAMS mblks.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 6n
-.rt  
 Displays the net to media mapping table. For IPv4, the address resolution table
 is displayed. See \fBarp\fR(1M). For IPv6, the neighbor cache is displayed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 6n
-.rt  
 Displays the statistics for the various protocol layers.
 .RE
 
@@ -875,23 +788,19 @@ The statistics use the MIB specified variables. The defined values for
 \fBipForwarding\fR are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBforwarding(1)\fR\fR
 .ad
 .RS 21n
-.rt  
 Acting as a gateway.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnot-forwarding(2)\fR\fR
 .ad
 .RS 21n
-.rt  
 Not acting as a gateway.
 .RE
 
@@ -949,8 +858,8 @@ format:
 input    eri0          output        input          (Total)   output
 packets  errs  packets errs  colls   packets  errs  packets  errs   colls
 227681   0     659471  1     502     261331   0     99597    1      502
-10       0     0       0     0       10       0     0        0      0 
-8        0     0       0     0       8        0     0        0      0 
+10       0     0       0     0       10       0     0        0      0
+8        0     0       0     0       8        0     0        0      0
 10       0     2       0     0       10       0     2        0      0
 .fi
 .in -2
@@ -969,67 +878,55 @@ forwarding packets. The \fIflags\fR column shows the status of the route. These
 flags are as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBU\fR\fR
 .ad
 .RS 5n
-.rt  
 Indicates route is \fBup\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBG\fR\fR
 .ad
 .RS 5n
-.rt  
 Route is to a gateway.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBH\fR\fR
 .ad
 .RS 5n
-.rt  
 Route is to a host and not a network.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBM\fR\fR
 .ad
 .RS 5n
-.rt  
 Redundant route established with the \fB-multirt\fR option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBS\fR\fR
 .ad
 .RS 5n
-.rt  
 Route was established using the \fB-setsrc\fR option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBD\fR\fR
 .ad
 .RS 5n
-.rt  
 Route was created dynamically by a redirect.
 .RE
 
@@ -1039,34 +936,28 @@ If the \fB-a\fR option is specified, there will be routing entries with the
 following flags:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBA\fR\fR
 .ad
 .RS 5n
-.rt  
 Combined routing and address resolution entries.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBB\fR\fR
 .ad
 .RS 5n
-.rt  
 Broadcast addresses.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBL\fR\fR
 .ad
 .RS 5n
-.rt  
 Local addresses for the host.
 .RE
 
@@ -1124,46 +1015,38 @@ when the lease will expire.
 The flags currently defined include:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBBOOTP\fR\fR
 .ad
 .RS 11n
-.rt  
 The interface has a lease obtained through \fBBOOTP\fR (IPv4 only).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBBUSY\fR\fR
 .ad
 .RS 11n
-.rt  
 The interface is busy with a \fBDHCP\fR transaction.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPRIMARY\fR\fR
 .ad
 .RS 11n
-.rt  
 The interface is the primary interface. See \fBdhcpinfo\fR(1) and
 \fBifconfig\fR(1M).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFAILED\fR\fR
 .ad
 .RS 11n
-.rt  
 The interface is in failure state and must be manually restarted.
 .RE
 
@@ -1180,12 +1063,10 @@ future lease.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/inet_type\fR\fR
 .ad
 .RS 26n
-.rt  
 \fBDEFAULT_IP\fR setting
 .RE
 
diff --git a/usr/src/man/man1m/netstrategy.1m b/usr/src/man/man1m/netstrategy.1m
index c7020a5ebc..5c3dbe8ceb 100644
--- a/usr/src/man/man1m/netstrategy.1m
+++ b/usr/src/man/man1m/netstrategy.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH netstrategy 1M "5 May 2007" "SunOS 5.11" "System Administration Commands"
+.TH NETSTRATEGY 1M "May 5, 2007"
 .SH NAME
 netstrategy \- return network configuration information
 .SH SYNOPSIS
@@ -31,7 +31,6 @@ a script. The command returns three tokens:
 These tokens are described as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fI<root filesystem type>\fR\fR
 .ad
@@ -43,7 +42,6 @@ the \fIfstype\fR column of the \fBmnttab\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fI<primary interface>\fR\fR
 .ad
@@ -55,7 +53,6 @@ interface used to load the kernel.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fI<network config strategy>\fR\fR
 .ad
@@ -75,23 +72,19 @@ The \fBnetstrategy\fR command has no options.
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 7n
-.rt  
 Success.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB!=0\fR\fR
 .ad
 .RS 7n
-.rt  
 An error occurred.
 .RE
 
@@ -103,13 +96,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/newaliases.1m b/usr/src/man/man1m/newaliases.1m
index e07465c946..dc0838ac7b 100644
--- a/usr/src/man/man1m/newaliases.1m
+++ b/usr/src/man/man1m/newaliases.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH newaliases 1M "14 Sep 2001" "SunOS 5.11" "System Administration Commands"
+.TH NEWALIASES 1M "Sep 14, 2001"
 .SH NAME
 newaliases \- rebuild the data base for the mail aliases file
 .SH SYNOPSIS
 .LP
 .nf
-\fBnewaliases\fR 
+\fBnewaliases\fR
 .fi
 
 .SH DESCRIPTION
@@ -25,7 +25,6 @@ three of the \fBProcessing\fR \fBOptions\fR that can be set from a
 configuration file with the \fB-o\fR option:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR\fI /path/to/alt/config/file\fR\fR
 .ad
@@ -36,7 +35,6 @@ Use alternate configuration file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-oA\fR\fIfile\fR\fR
 .ad
@@ -47,7 +45,6 @@ Specify possible alias files.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-oL\fR\fIn\fR\fR
 .ad
@@ -58,7 +55,6 @@ Set the default log level to \fIn\fR. Defaults to \fB9\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-on\fR\fR
 .ad
@@ -94,134 +90,110 @@ The following command runs \fBnewaliases\fR on an alias file different from the
 defined in \fB/usr/include/sysexits.h\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEX_OK\fR\fR
 .ad
 .RS 18n
-.rt  
 Successful completion on all addresses.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEX_NOUSER\fR\fR
 .ad
 .RS 18n
-.rt  
 User name not recognized.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEX_UNAVAILABLE\fR\fR
 .ad
 .RS 18n
-.rt  
 Catchall. Necessary resources were not available.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEX_SYNTAX\fR\fR
 .ad
 .RS 18n
-.rt  
 Syntax error in address.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEX_SOFTWARE\fR\fR
 .ad
 .RS 18n
-.rt  
 Internal software error, including bad arguments.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEX_OSERR\fR\fR
 .ad
 .RS 18n
-.rt  
 Temporary operating system error, such as "cannot fork".
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEX_NOHOST\fR\fR
 .ad
 .RS 18n
-.rt  
 Host name not recognized.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEX_TEMPFAIL\fR\fR
 .ad
 .RS 18n
-.rt  
 Message could not be sent immediately, but was queued.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/aliases\fR\fR
 .ad
 .RS 25n
-.rt  
 Symbolic link to \fB/etc/mail/aliases\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mail/aliases.pag\fR\fR
 .ad
 .RS 25n
-.rt  
- 
+
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mail/aliases.dir\fR\fR
 .ad
 .RS 25n
-.rt  
 \fBndbm\fR files maintained by \fBnewaliases\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mail/aliases.db\fR\fR
 .ad
 .RS 25n
-.rt  
 Berkeley DataBase file maintained by newaliases
 .RE
 
diff --git a/usr/src/man/man1m/newfs.1m b/usr/src/man/man1m/newfs.1m
index b274b6a47d..a3d4cf4c24 100644
--- a/usr/src/man/man1m/newfs.1m
+++ b/usr/src/man/man1m/newfs.1m
@@ -1,6 +1,6 @@
 '\" te
 .\"  Copyright (c) 1983 Regents of the University of California. All rights reserved. The Berkeley software License Agreement specifies the terms and conditions for redistribution. Copyright (c) 2003, Sun Microsystems, Inc. All Rights Reserved
-.TH newfs 1M "1 Mar 2007" "SunOS 5.11" "System Administration Commands"
+.TH NEWFS 1M "Mar 1, 2007"
 .SH NAME
 newfs \- construct a UFS file system
 .SH SYNOPSIS
@@ -52,7 +52,6 @@ set \fInbpi\fR lower than 1 Mbyte on a multiterabyte UFS file system.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-N\fR\fR
 .ad
@@ -65,7 +64,6 @@ called here.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR\fR
 .ad
@@ -77,7 +75,6 @@ to create a filesystem with the specified configuration parameters.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-B\fR\fR
 .ad
@@ -90,7 +87,6 @@ parameters.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR\fR
 .ad
@@ -106,7 +102,6 @@ the user-supplied value of \fIfragsize\fR or \fInbpi\fR is ignored.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -118,7 +113,6 @@ Verbose. \fBnewfs\fR prints out its actions, including the parameters passed to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fImkfs-options\fR\fR
 .ad
@@ -127,7 +121,6 @@ Verbose. \fBnewfs\fR prints out its actions, including the parameters passed to
 Options that override the default parameters are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIapc\fR\fR
 .ad
@@ -141,7 +134,6 @@ This option is not applicable for disks with EFI labels and is ignored.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR \fIbsize\fR\fR
 .ad
@@ -154,7 +146,6 @@ block size.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcgsize\fR\fR
 .ad
@@ -172,7 +163,6 @@ This option is not applicable for disks with EFI labels and is ignored.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR \fImaxcontig\fR\fR
 .ad
@@ -205,7 +195,6 @@ You can subsequently change this parameter by using \fBtunefs\fR(1M).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIgap\fR\fR
 .ad
@@ -217,7 +206,6 @@ is always set to \fB0\fR, regardless of the input value.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfragsize\fR\fR
 .ad
@@ -239,7 +227,6 @@ For file systems greater than 1 terabyte or for file systems created with the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fInbpi\fR\fR
 .ad
@@ -262,8 +249,8 @@ Less than 1GB             2048
 Less than 2GB             4096
 Less than 3GB             6144
 3GB to 1 Tbyte            8192
-Greater than 1 Tbyte  
-   or created with -T     1048576 
+Greater than 1 Tbyte
+   or created with -T     1048576
 .fi
 .in -2
 .sp
@@ -274,7 +261,6 @@ The number of inodes can increase if the file system is expanded with the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fIfree\fR\fR
 .ad
@@ -293,7 +279,6 @@ This parameter can be subsequently changed using the \fBtunefs\fR(1M) command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fInrpos\fR\fR
 .ad
@@ -307,7 +292,6 @@ This option is not applicable for disks with EFI labels and is ignored.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIspace\fR\||\|\fItime\fR\fR
 .ad
@@ -322,7 +306,6 @@ This parameter can subsequently be changed with the \fBtunefs\fR(1M) command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrpm\fR\fR
 .ad
@@ -338,7 +321,6 @@ This option is not applicable for disks with EFI labels and is ignored.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsize\fR\fR
 .ad
@@ -350,7 +332,6 @@ partition.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fIntrack\fR\fR
 .ad
@@ -370,7 +351,6 @@ This option is not applicable for disks with EFI labels and is ignored.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIraw-device\fR\fR
 .ad
@@ -445,7 +425,7 @@ This command creates a 800-Gbyte file system on the volume,
 .nf
 # newfs -T /dev/md/rdsk/d99
 newfs: construct a new file system /dev/md/rdsk/d99: (y/n)? y
-   /dev/md/rdsk/d99: 1677754368 sectors in 45512 cylinders of 
+   /dev/md/rdsk/d99: 1677754368 sectors in 45512 cylinders of
    144 tracks, 256 sectors
    819216.0MB in 1821 cyl groups (25 c/g, 450.00MB/g, 448 i/g) .\|.\|.
 .fi
@@ -475,7 +455,6 @@ terabytes in this example:
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -486,7 +465,6 @@ The operation was successful.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR, \fB10\fR\fR
 .ad
@@ -509,7 +487,6 @@ Other exit values may be returned by \fBmkfs\fR(1M), which is called by
 .SH DIAGNOSTICS
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnewfs: No such file or directory\fR\fR
 .ad
@@ -520,7 +497,6 @@ The device specified does not exist, or a disk partition was not specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIspecial\fR\fB: cannot open\fR\fR
 .ad
diff --git a/usr/src/man/man1m/newkey.1m b/usr/src/man/man1m/newkey.1m
index fbf49ac06a..c7433ddf35 100644
--- a/usr/src/man/man1m/newkey.1m
+++ b/usr/src/man/man1m/newkey.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH newkey 1M "13 Nov 2003" "SunOS 5.11" "System Administration Commands"
+.TH NEWKEY 1M "Nov 13, 2003"
 .SH NAME
 newkey \- create a new Diffie-Hellman key pair in the publickey database
 .SH SYNOPSIS
@@ -58,31 +58,26 @@ password to perform an LDAP update for the host.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIhostname\fR\fR
 .ad
 .RS 15n
-.rt  
 Create a new public/secret key pair for the privileged user at the given
 \fBhostname\fR. Prompts for a password for the given \fBhostname\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIusername\fR\fR
 .ad
 .RS 15n
-.rt  
 Create a new public/secret key pair for the given \fIusername\fR. Prompts for a
 password for the given \fIusername\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fBnisplus\fR\fR
 .ad
@@ -99,7 +94,6 @@ password for the given \fIusername\fR.
 \fB\fB-s\fR \fBldap\fR\fR
 .ad
 .RS 15n
-.rt  
 Update the database in the specified source: \fBnisplus\fR (for NIS+),
 \fBnis\fR (for NIS), \fBfiles\fR, or \fBldap\fR (LDAP). Other sources may be
 available in the future.
diff --git a/usr/src/man/man1m/nfs4cbd.1m b/usr/src/man/man1m/nfs4cbd.1m
index 3771200111..4f1716405b 100644
--- a/usr/src/man/man1m/nfs4cbd.1m
+++ b/usr/src/man/man1m/nfs4cbd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH nfs4cbd 1M "11 Apr 2005" "SunOS 5.11" "System Administration Commands"
+.TH NFS4CBD 1M "Apr 11, 2005"
 .SH NAME
 nfs4cbd \- NFS Version 4 callback daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/nfs/nfs4cbd\fR 
+\fB/usr/lib/nfs/nfs4cbd\fR
 .fi
 
 .SH DESCRIPTION
diff --git a/usr/src/man/man1m/nfsd.1m b/usr/src/man/man1m/nfsd.1m
index c5d1f202cd..eccb848658 100644
--- a/usr/src/man/man1m/nfsd.1m
+++ b/usr/src/man/man1m/nfsd.1m
@@ -4,13 +4,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH nfsd 1M "22 Jul 2008" "SunOS 5.11" "System Administration Commands"
+.TH NFSD 1M "Jul 22, 2008"
 .SH NAME
 nfsd \- NFS daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/nfs/nfsd\fR [\fB-a\fR] [\fB-c\fR \fI#_conn\fR] [\fB-l\fR \fIlisten_backlog\fR] 
+\fB/usr/lib/nfs/nfsd\fR [\fB-a\fR] [\fB-c\fR \fI#_conn\fR] [\fB-l\fR \fIlisten_backlog\fR]
      [\fB-p\fR \fIprotocol\fR] [\fB-t\fR \fIdevice\fR] [\fInservers\fR]
 .fi
 
@@ -43,12 +43,10 @@ To change startup parameters for \fBnfsd\fR, use the \fBsharectl\fR(1M) and
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 15n
-.rt  
 Start a \fBNFS\fR daemon over all available connectionless and
 connection-oriented transports, including UDP and TCP. Equivalent of setting
 the \fBNFSD_PROTOCOL\fR parameter to \fBALL\fR in the \fBnfs\fR file.
@@ -56,12 +54,10 @@ the \fBNFSD_PROTOCOL\fR parameter to \fBALL\fR in the \fBnfs\fR file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fI#_conn\fR\fR
 .ad
 .RS 15n
-.rt  
 This sets the maximum number of connections allowed to the \fBNFS\fR server
 over connection-oriented transports. By default, the number of connections is
 unlimited. Equivalent of the \fBNFSD_MAX_CONNECTIONS\fR parameter in the
@@ -70,12 +66,10 @@ unlimited. Equivalent of the \fBNFSD_MAX_CONNECTIONS\fR parameter in the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 15n
-.rt  
 Set connection queue length for the \fBNFS TCP\fR over a connection-oriented
 transport. The default value is 32 entries. Equivalent of the
 \fBNFSD_LISTEN_BACKLOG\fR parameter in the \fBnfs\fR file.
@@ -83,24 +77,20 @@ transport. The default value is 32 entries. Equivalent of the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIprotocol\fR\fR
 .ad
 .RS 15n
-.rt  
 Start a \fBNFS\fR daemon over the specified protocol. Equivalent of the
 \fBNFSD_PROTOCOL\fR parameter in the \fBnfs\fR file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fIdevice\fR\fR
 .ad
 .RS 15n
-.rt  
 Start a \fBNFS\fR daemon for the transport specified by the given device.
 Equivalent of the \fBNFSD_DEVICE\fR parameter in the \fBnfs\fR file.
 .RE
@@ -111,12 +101,10 @@ Equivalent of the \fBNFSD_DEVICE\fR parameter in the \fBnfs\fR file.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fInservers\fR\fR
 .ad
 .RS 12n
-.rt  
 This sets the maximum number of concurrent \fBNFS\fR requests that the server
 can handle. This concurrency is achieved by up to \fInservers\fR threads
 created as needed in the kernel. \fInservers\fR should be based on the load
@@ -140,63 +128,52 @@ variable, edit the \fB/etc/system\fR file and add this entry:
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Daemon started successfully.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Daemon failed to start.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\&.nfs\fIXXX\fR\fR\fR
 .ad
 .RS 24n
-.rt  
 Client machine pointer to an open-but-unlinked file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/nfs\fR\fR
 .ad
 .RS 24n
-.rt  
 Contains startup parameters for \fBnfsd\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/system\fR\fR
 .ad
 .RS 24n
-.rt  
 System configuration information file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/nfs/v4_state\fR\fR
 .ad
@@ -205,7 +182,6 @@ System configuration information file.
 \fB\fB/var/nfs/v4_oldstate\fR\fR
 .ad
 .RS 24n
-.rt  
 Directories used by the server to manage client state information. These
 directories should not be removed.
 .RE
diff --git a/usr/src/man/man1m/nfslogd.1m b/usr/src/man/man1m/nfslogd.1m
index c44a53096d..6667c4b525 100644
--- a/usr/src/man/man1m/nfslogd.1m
+++ b/usr/src/man/man1m/nfslogd.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH nfslogd 1M "2 Dec 2004" "SunOS 5.11" "System Administration Commands"
+.TH NFSLOGD 1M "Dec 2, 2004"
 .SH NAME
 nfslogd \- nfs logging daemon
 .SH SYNOPSIS
@@ -94,24 +94,20 @@ There are various configurable parameters that affect the behavior of the
 and are described below:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBUMASK\fR\fR
 .ad
 .RS 27n
-.rt  
 Sets the file mode for the log files, work buffer files and file handle mapping
 database.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMIN_PROCESSING_SIZE\fR\fR
 .ad
 .RS 27n
-.rt  
 Specifies the minimum size, in bytes, that the buffer  file must reach before
 processing the work information and  writing to the log file. The value of
 \fBMIN_PROCESSING_SIZE\fR must be between 1 and \fBulimit\fR.
@@ -119,12 +115,10 @@ processing the work information and  writing to the log file. The value of
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBIDLE_TIME\fR\fR
 .ad
 .RS 27n
-.rt  
 Specifies the amount of time, in seconds, the daemon should sleep while waiting
 for more information to be placed in the buffer file. \fBIDLE_TIME\fR also
 determines how often the configuration file will be reread. The value of
@@ -133,12 +127,10 @@ determines how often the configuration file will be reread. The value of
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMAX_LOGS_PRESERVE\fR\fR
 .ad
 .RS 27n
-.rt  
 The \fBnfslogd\fR periodically cycles its logs. \fBMAX_LOGS_PRESERVE\fR
 specifies the maximum number of log files to save. When \fBMAX_LOGS_PRESERVE\fR
 is reached, the oldest files will be overwritten as new log files are created.
@@ -150,12 +142,10 @@ to the value configured for \fBMAX_LOGS_PRESERVE\fR. The value of
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCYCLE_FREQUENCY\fR\fR
 .ad
 .RS 27n
-.rt  
 Specifies how often, in hours, the log files are cycled. \fBCYCLE_FREQUENCY\fR
 is used to insure that the log files  do not get too large. The  value of
 \fBCYCLE_FREQUENCY\fR must be between 1  and \fBINT_MAX\fR.
@@ -163,12 +153,10 @@ is used to insure that the log files  do not get too large. The  value of
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMAPPING_UPDATE_INTERVAL\fR\fR
 .ad
 .RS 27n
-.rt  
 Specifies the time interval, in seconds, between updates of the records in the
 file handle to path mapping tables. Instead of updating the \fBatime\fR of a
 record each time that record is accessed, it is only updated if it has aged
@@ -179,12 +167,10 @@ of this parameter must be between 1 and \fBINT_MAX\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPRUNE_TIMEOUT\fR\fR
 .ad
 .RS 27n
-.rt  
 Specifies when a database record times out, in hours. If the time that elapsed
 since the record was last accessed is greater than \fBPRUNE_TIMEOUT\fR then the
 record can be pruned from the database. The default value for
@@ -198,57 +184,47 @@ must  be between 1 and \fBINT_MAX\fR.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Daemon started successfully.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Daemon failed to start.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/nfs/nfslogtab\fR \fR
 .ad
 .RS 24n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/nfs/nfslog.conf\fR\fR
 .ad
 .RS 24n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/nfslogd\fR\fR
 .ad
 .RS 24n
-.rt  
 
 .RE
 
diff --git a/usr/src/man/man1m/nfsmapid.1m b/usr/src/man/man1m/nfsmapid.1m
index e003609960..407c8cffd0 100644
--- a/usr/src/man/man1m/nfsmapid.1m
+++ b/usr/src/man/man1m/nfsmapid.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH nfsmapid 1M "30 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH NFSMAPID 1M "Oct 30, 2007"
 .SH NAME
 nfsmapid \- NFS user and group id mapping daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/nfs/nfsmapid\fR 
+\fB/usr/lib/nfs/nfsmapid\fR
 .fi
 
 .SH DESCRIPTION
diff --git a/usr/src/man/man1m/nfsstat.1m b/usr/src/man/man1m/nfsstat.1m
index 467a397a1f..62ce9cb32d 100644
--- a/usr/src/man/man1m/nfsstat.1m
+++ b/usr/src/man/man1m/nfsstat.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH nfsstat 1M "16 Jun 2009" "SunOS 5.11" "System Administration Commands"
+.TH NFSSTAT 1M "Jun 16, 2009"
 .SH NAME
 nfsstat \- NFS statistics
 .SH SYNOPSIS
@@ -33,7 +33,6 @@ The default displays everything, but reinitializes nothing.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -44,7 +43,6 @@ Display \fBNFS_ACL\fR information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
@@ -58,7 +56,6 @@ Display client information. Only the client side \fBNFS\fR, \fBRPC\fR, and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR [\fIpathname...\fR]\fR
 .ad
@@ -84,7 +81,6 @@ alerting that the \fB-m\fR flag cannot be combined with other options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -97,7 +93,6 @@ to print client or server \fBNFS\fR information only.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -108,7 +103,6 @@ Display \fBRPC\fR information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
@@ -119,7 +113,6 @@ Display server information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fBu\fR | \fBd\fR\fR
 .ad
@@ -134,7 +127,6 @@ time. See \fBtime\fR(2). Specify \fBd\fR for standard date format. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR \fIversion\fR\fR
 .ad
@@ -147,7 +139,6 @@ statistics for that version. By default, prints statistics for all versions.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-z\fR\fR
 .ad
@@ -164,7 +155,6 @@ statistics after printing them.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcount\fR\fR
 .ad
@@ -175,7 +165,6 @@ Display only count reports
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIinterval\fR\fR
 .ad
@@ -186,7 +175,6 @@ Report once each interval seconds.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpathname\fR\fR
 .ad
@@ -202,7 +190,6 @@ statistics are to be displayed.
 The server \fBRPC\fR display includes the following fields:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbadcalls\fR\fR
 .ad
@@ -214,7 +201,6 @@ The total number of calls rejected by the \fBRPC\fR layer (the sum of
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbadlen\fR\fR
 .ad
@@ -226,7 +212,6 @@ The number of \fBRPC\fR calls with a length shorter than a minimum-sized
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcalls\fR\fR
 .ad
@@ -237,7 +222,6 @@ The total number of \fBRPC\fR calls received.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdupchecks\fR\fR
 .ad
@@ -248,7 +232,6 @@ The number of \fBRPC\fR calls that looked up in the duplicate request cache.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdupreqs\fR\fR
 .ad
@@ -259,7 +242,6 @@ The number of \fBRPC\fR calls that were found to be duplicates.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnullrecv\fR\fR
 .ad
@@ -271,7 +253,6 @@ be received.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBxdrcall\fR\fR
 .ad
@@ -294,7 +275,6 @@ various calls that were made.
 The client \fBRPC\fR display includes the following fields:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcalls\fR\fR
 .ad
@@ -305,7 +285,6 @@ The total number of \fBRPC\fR calls made.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbadcalls\fR\fR
 .ad
@@ -316,7 +295,6 @@ The total number of calls rejected by the \fBRPC\fR layer.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbadverfs\fR\fR
 .ad
@@ -327,7 +305,6 @@ The number of times the call failed due to a bad verifier in the response.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbadxids\fR\fR
 .ad
@@ -339,7 +316,6 @@ to any outstanding call.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcantconn\fR\fR
 .ad
@@ -351,7 +327,6 @@ the server.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcantsend\fR\fR
 .ad
@@ -363,7 +338,6 @@ connectionless transport when it tried to do so.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinterrupts\fR\fR
 .ad
@@ -374,7 +348,6 @@ The number of times the call was interrupted by a signal before completing.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnewcreds\fR\fR
 .ad
@@ -385,7 +358,6 @@ The number of times authentication information had to be refreshed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnomem\fR\fR
 .ad
@@ -396,7 +368,6 @@ The number of times the call failed due to a failure to allocate memory.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBretrans\fR\fR
 .ad
@@ -409,7 +380,6 @@ connection-less transports.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtimeouts\fR\fR
 .ad
@@ -420,7 +390,6 @@ The number of times a call timed out while waiting for a reply from the server.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtimers\fR\fR
 .ad
@@ -451,7 +420,6 @@ options, mount flags internal to the system, and other mount information. See
 The following mount flags are set by mount options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgrpid\fR\fR
 .ad
@@ -462,7 +430,6 @@ System V group id inheritance.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhard\fR\fR
 .ad
@@ -473,7 +440,6 @@ Hard mount.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBintr\fR\fR
 .ad
@@ -484,7 +450,6 @@ Interrupts allowed on hard mount.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBllock\fR\fR
 .ad
@@ -495,7 +460,6 @@ Local locking being used (no lock manager).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnoac\fR\fR
 .ad
@@ -506,7 +470,6 @@ Client is not caching attributes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnointr\fR\fR
 .ad
@@ -517,7 +480,6 @@ No interrupts allowed on hard mount.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnocto\fR\fR
 .ad
@@ -528,7 +490,6 @@ No close-to-open consistency.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBretrans\fR\fR
 .ad
@@ -539,7 +500,6 @@ No close-to-open consistency.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrpctimesync\fR\fR
 .ad
@@ -550,7 +510,6 @@ No close-to-open consistency.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrsize\fR\fR
 .ad
@@ -561,7 +520,6 @@ Read buffer size in bytes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsec\fR\fR
 .ad
@@ -570,7 +528,6 @@ Read buffer size in bytes.
 \fBsec\fR has one of the following values:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdh\fR\fR
 .ad
@@ -581,7 +538,6 @@ Read buffer size in bytes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBkrb5\fR\fR
 .ad
@@ -592,7 +548,6 @@ Read buffer size in bytes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBkrb5i\fR\fR
 .ad
@@ -603,7 +558,6 @@ Read buffer size in bytes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBkrb5p\fR\fR
 .ad
@@ -614,7 +568,6 @@ Read buffer size in bytes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnone\fR\fR
 .ad
@@ -625,7 +578,6 @@ No authentication.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshort\fR\fR
 .ad
@@ -636,7 +588,6 @@ Short hand UNIX-style authentication.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsys\fR\fR
 .ad
@@ -649,7 +600,6 @@ UNIX-style authentication (UID, GID).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsoft\fR\fR
 .ad
@@ -660,7 +610,6 @@ Soft mount.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtimeo\fR\fR
 .ad
@@ -671,7 +620,6 @@ Initial \fBNFS\fR timeout, in tenths of a second.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwsize\fR\fR
 .ad
@@ -685,7 +633,6 @@ Write buffer size in bytes.
 The following mount flags are internal to the system:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBacl\fR\fR
 .ad
@@ -696,7 +643,6 @@ Server supports \fBNFS_ACL\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdown\fR\fR
 .ad
@@ -707,7 +653,6 @@ Server is down.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdynamic\fR\fR
 .ad
@@ -718,7 +663,6 @@ Dynamic transfer size adjustment.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlink\fR\fR
 .ad
@@ -729,7 +673,6 @@ Server supports links.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmirrormount\fR\fR
 .ad
@@ -740,7 +683,6 @@ Mounted automatically by means of the \fBmirrormount\fR mechanism.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprinted\fR\fR
 .ad
@@ -751,7 +693,6 @@ Mounted automatically by means of the \fBmirrormount\fR mechanism.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBreaddir\fR\fR
 .ad
@@ -762,7 +703,6 @@ Use \fBreaddir\fR instead of \fBreaddirplus\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsymlink\fR\fR
 .ad
@@ -776,7 +716,6 @@ Server supports symbolic links.
 The following flags relate to additional mount information:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBproto\fR\fR
 .ad
@@ -787,7 +726,6 @@ Protocol.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvers\fR\fR
 .ad
@@ -802,7 +740,6 @@ The \fB-m\fR option also provides attribute cache timeout values. The following
 fields in \fB-m\fR ouput provide timeout values for attribute cache:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBacdirmax\fR\fR
 .ad
@@ -813,7 +750,6 @@ Maximum seconds to hold cached directory attributes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBacdirmin\fR\fR
 .ad
@@ -824,7 +760,6 @@ Minimum seconds to hold cached directory attributes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBacregmax\fR\fR
 .ad
@@ -835,7 +770,6 @@ Maximum seconds to hold cached file attributes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBacregmin\fR\fR
 .ad
@@ -849,7 +783,6 @@ Minimum seconds to hold cached file attributes.
 The following fields in \fB-m\fR output provide failover information:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcurrserver\fR\fR
 .ad
@@ -861,7 +794,6 @@ additional details.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfailover\fR\fR
 .ad
@@ -872,7 +804,6 @@ How many times a new server has been selected.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnoresponse\fR\fR
 .ad
@@ -883,7 +814,6 @@ How many times servers have failed to respond.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremap\fR\fR
 .ad
@@ -899,7 +829,6 @@ retransmissions. These items are displayed only where dynamic retransmission is
 in use.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcur\fR\fR
 .ad
@@ -910,7 +839,6 @@ Current backed-off retransmission value, in milliseconds.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdev\fR\fR
 .ad
@@ -921,7 +849,6 @@ Estimated deviation, in milliseconds.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsrtt\fR\fR
 .ad
@@ -936,7 +863,6 @@ The value for the smoothed round-trip time, in milliseconds.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -947,7 +873,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
diff --git a/usr/src/man/man1m/nlsadmin.1m b/usr/src/man/man1m/nlsadmin.1m
index 33d3feea72..99d500d88e 100644
--- a/usr/src/man/man1m/nlsadmin.1m
+++ b/usr/src/man/man1m/nlsadmin.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH nlsadmin 1M "3 Apr 1997" "SunOS 5.11" "System Administration Commands"
+.TH NLSADMIN 1M "Apr 3, 1997"
 .SH NAME
 nlsadmin \- network listener service administration
 .SH SYNOPSIS
@@ -29,7 +29,7 @@ nlsadmin \- network listener service administration
 
 .LP
 .nf
-\fB/usr/sbin/nlsadmin\fR \fB-c\fR \fIcmd\fR | \fB-o\fR \fIstreamname\fR [\fB-p\fR \fImodules\fR] 
+\fB/usr/sbin/nlsadmin\fR \fB-c\fR \fIcmd\fR | \fB-o\fR \fIstreamname\fR [\fB-p\fR \fImodules\fR]
      [\fB-A\fR \fIaddress\fR | \fB-D\fR] [\fB-R\fR \fIprognum\fR : \fIversnum\fR]
 .fi
 
@@ -72,7 +72,6 @@ those services are put into effect immediately.
 arguments:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
@@ -83,7 +82,6 @@ Report the status of all of the listener processes installed on this machine.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fInet_spec\fR\fR
 .ad
@@ -94,7 +92,6 @@ Print the status of the listener process for \fInet_spec\fR \fI\&.\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR \fInet_spec\fR\fR
 .ad
@@ -109,7 +106,6 @@ active, the exit code will be \fB1\fR; the exit code will be greater than
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR \fInet_spec\fR\fR
 .ad
@@ -123,7 +119,6 @@ before the server is started.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-z\fR \fIservice_code net_spec\fR\fR
 .ad
@@ -135,7 +130,6 @@ code \fIservice_code,\fR giving the same information as in the \fB-v\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-q\fR\fB \fR\fB-z\fR \fIservice_code net_spec\fR\fR
 .ad
@@ -148,7 +142,6 @@ Query the status of the service with service code \fIservice_code\fR on network
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-l\fR \fIaddress net_spec\fR\fR
 .ad
@@ -166,7 +159,6 @@ A change of address takes effect immediately.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fIaddress net_spec\fR\fR
 .ad
@@ -181,7 +173,6 @@ configured as service code 1 (see the \fB-a\fR option, below).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fInet_spec\fR\fR
 .ad
@@ -196,7 +187,6 @@ listener must be initialized before assigning addresses or services.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIservice_code\fR\fR
 .ad
@@ -242,7 +232,6 @@ services for a new network.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-r\fR \fIservice_code net_spec\fR\fR
 .ad
@@ -255,7 +244,6 @@ a service from a machine.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-e\fR \fIservice_code net_spec\fR\fR
 .ad
@@ -275,7 +263,6 @@ unaffected.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-s\fR \fInet_spec\fR\fR
 .ad
@@ -313,7 +300,6 @@ primary, or default, listener for a particular \fInet_spec\fR.
 commands. In that capacity, the following combinations of options can be used:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
@@ -326,7 +312,6 @@ standard output. It is used as part of the \fBsacadm\fR command line when
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcmd\fR | \fB-o\fR \fIstreamname\fR [ \fB-p\fR \fImodules\fR ] [
 \fB-A\fR \fIaddress\fR | \fB-D\fR ] [ \fB-R\fR \fIprognum\fR : \fIversnum\fR
diff --git a/usr/src/man/man1m/nscadm.1m b/usr/src/man/man1m/nscadm.1m
index eb8e87547f..ab7b28f59a 100644
--- a/usr/src/man/man1m/nscadm.1m
+++ b/usr/src/man/man1m/nscadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH nscadm 1M "2 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH NSCADM 1M "Oct 2, 2007"
 .SH NAME
 nscadm \- network storage control utility
 .SH SYNOPSIS
@@ -46,12 +46,10 @@ specified device.
 The \fBnscadm\fR command supports the following option.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 13n
-.rt  
 Display the usage menu.
 .RE
 
@@ -61,7 +59,6 @@ Display the usage menu.
 The \fBnscadm\fR command line supports the following operand.
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdevice\fR\fR
 .ad
@@ -77,23 +74,19 @@ For the \fBfreeze\fR and \fBunfreeze\fR, subcommands \fBnscadm\fR returns the
 following exit values:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 13n
-.rt  
 Success
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB255\fR\fR
 .ad
 .RS 13n
-.rt  
 Error
 .RE
 
@@ -103,34 +96,28 @@ For the \fBisfrozen\fR subcommand, \fBnscadm\fR returns the following exit
 values:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 13n
-.rt  
 Device is currently frozen.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 13n
-.rt  
 Device is not currently frozen.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB255\fR\fR
 .ad
 .RS 13n
-.rt  
 Error
 .RE
 
@@ -142,13 +129,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/nscd.1m b/usr/src/man/man1m/nscd.1m
index 2ffc86f73f..2069ed387d 100644
--- a/usr/src/man/man1m/nscd.1m
+++ b/usr/src/man/man1m/nscd.1m
@@ -1,9 +1,9 @@
 '\" te
-.\" Copyright (c) 2006 Sun Microsystems, Inc. All Rights Reserved 
+.\" Copyright (c) 2006 Sun Microsystems, Inc. All Rights Reserved
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH nscd 1M "14 Sep 2006" "SunOS 5.11" "System Administration Commands"
+.TH NSCD 1M "Sep 14, 2006"
 .SH NAME
 nscd \- name service cache daemon
 .SH SYNOPSIS
@@ -82,7 +82,6 @@ Supported values for \fIcachename\fR are: \fBpasswd\fR, \fBgroup\fR,
 \fBprinters\fR, and \fBproject\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIconfiguration-file\fR\fR
 .ad
@@ -93,7 +92,6 @@ Causes \fBnscd\fR to read its configuration data from the specified file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR\fR
 .ad
@@ -105,7 +103,6 @@ only option executable by non-root users.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIcachename\fR\fB, yes\fR|\fBno\fR\fR
 .ad
@@ -116,7 +113,6 @@ Enables or disables the specified cache.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIcachename\fR\fR
 .ad
@@ -141,12 +137,10 @@ example# svcadm enable system/name-service-cache
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/nscd.conf\fR\fR
 .ad
 .RS 18n
-.rt  
 Determines athe behavior of the cache daemon
 .RE
 
diff --git a/usr/src/man/man1m/ntfscat.1m b/usr/src/man/man1m/ntfscat.1m
index 48feae4908..4166857579 100644
--- a/usr/src/man/man1m/ntfscat.1m
+++ b/usr/src/man/man1m/ntfscat.1m
@@ -7,7 +7,7 @@
 .\" This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation ; either version 2 of the License, or (at your option) any later version.  This program is distributed
 .\" in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.  You should have received a copy of the GNU General Public License along with this program
 .\" (in the main directory of the Linux-NTFS distribution in the file COPYING);  if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 11-1307 USA
-.TH ntfscat 1M "28 May 2009" "SunOS 5.11" "System Administration Commands"
+.TH NTFSCAT 1M "May 28, 2009"
 .SH NAME
 ntfscat \- display NTFS files and streams on the standard output
 .SH SYNOPSIS
@@ -33,7 +33,6 @@ can be combined. For example, \fB-fv\fR is the equivalent of \fB-f\fR \fB-v\fR.
 A full-name option can be abbreviated to a unique prefix of its name.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR, \fB--attribute\fR \fItype\fR\fR
 .ad
@@ -73,7 +72,6 @@ shell from interpreting the name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR, \fB--force\fR\fR
 .ad
@@ -85,7 +83,6 @@ option with caution.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR, \fB--help\fR\fR
 .ad
@@ -96,7 +93,6 @@ Show a list of options with a brief description of each.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR, \fB--inode\fR \fInum\fR\fR
 .ad
@@ -107,7 +103,6 @@ Specify a file by its inode number instead of its name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR, \fB--attribute-name\fR \fIname\fR\fR
 .ad
@@ -118,7 +113,6 @@ Display the attribute identified by \fIname\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR, \fB--quiet\fR\fR
 .ad
@@ -129,7 +123,6 @@ Suppress some debug, warning, and error messages.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR, \fB--version\fR\fR
 .ad
@@ -140,7 +133,6 @@ Show the version number, copyright, and license information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR, \fB--verbose\fR\fR
 .ad
@@ -203,13 +195,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ntfsclone.1m b/usr/src/man/man1m/ntfsclone.1m
index b72803fa7c..a288e018fe 100644
--- a/usr/src/man/man1m/ntfsclone.1m
+++ b/usr/src/man/man1m/ntfsclone.1m
@@ -7,7 +7,7 @@
 .\" This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation ; either version 2 of the License, or (at your option) any later version.  This program is distributed
 .\" in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.  You should have received a copy of the GNU General Public License along with this program
 .\" (in the main directory of the Linux-NTFS distribution in the file COPYING);  if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 11-1307 USA
-.TH ntfsclone 1M "14 May 2009" "SunOS 5.11" "System Administration Commands"
+.TH NTFSCLONE 1M "May 14, 2009"
 .SH NAME
 ntfsclone \- clone, image, restore, or rescue an NTFS
 .SH SYNOPSIS
@@ -157,7 +157,6 @@ can be combined. For example, \fB-fv\fR is the equivalent of \fB-f\fR \fB-v\fR.
 A full-name option can be abbreviated to a unique prefix of its name.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR, \fB--force\fR\fR
 .ad
@@ -169,7 +168,6 @@ following a consistency check.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR, \fB--help\fR\fR
 .ad
@@ -180,7 +178,6 @@ Show a list of options with a brief description of each one.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR, \fB--ignore-fs-check\fR\fR
 .ad
@@ -193,7 +190,6 @@ inconsistency are saved.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR, \fB--metadata\fR\fR
 .ad
@@ -204,7 +200,6 @@ Clone only metadata. With this option, you must clone only to a file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR, \fB--output\fR \fIfile\fR\fR
 .ad
@@ -216,7 +211,6 @@ clone to the standard output.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-O\fR, \fB--overwrite\fR \fIfile\fR\fR
 .ad
@@ -227,7 +221,6 @@ Clone NTFS to \fIfile\fR, overwriting \fIfile\fR if it already exists.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--rescue\fR\fR
 .ad
@@ -243,7 +236,6 @@ string: \fBBadSector\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR, \fB--restore-image\fR \fIsource\fR\fR
 .ad
@@ -255,7 +247,6 @@ Restore from the special image format specified by \fIsource\fR. If
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR, \fB--save-image\fR\fR
 .ad
@@ -446,13 +437,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ntfscluster.1m b/usr/src/man/man1m/ntfscluster.1m
index 65efac3005..62494b22db 100644
--- a/usr/src/man/man1m/ntfscluster.1m
+++ b/usr/src/man/man1m/ntfscluster.1m
@@ -7,7 +7,7 @@
 .\" This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation ; either version 2 of the License, or (at your option) any later version.  This program is distributed
 .\" in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.  You should have received a copy of the GNU General Public License along with this program
 .\" (in the main directory of the Linux-NTFS distribution in the file COPYING);  if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 11-1307 USA
-.TH ntfscluster 1M "28 May 2009" "SunOS 5.11" "System Administration Commands"
+.TH NTFSCLUSTER 1M "May 28, 2009"
 .SH NAME
 ntfscluster \- identify files in a specified region of an NTFS volume
 .SH SYNOPSIS
@@ -23,7 +23,6 @@ The \fBntfscluster\fR utility has three modes of operation: \fBinfo\fR,
 \fBsector\fR, and \fBcluster\fR, described as follows.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBInfo\fR\fR
 .ad
@@ -35,7 +34,6 @@ general information about the NTFS volume when it is working.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSector\fR\fR
 .ad
@@ -47,7 +45,6 @@ range of sectors. This mode is put in effect by the \fB--sector\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCluster\fR\fR
 .ad
@@ -68,7 +65,6 @@ can be combined. For example, \fB-fv\fR is the equivalent of \fB-f\fR \fB-v\fR.
 A full-name option can be abbreviated to a unique prefix of its name.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR, \fB--cluster\fR \fIrange\fR\fR
 .ad
@@ -79,7 +75,6 @@ Any files whose data is in this range of clusters will be displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR, \fB--filename\fR \fIfilename\fR\fR
 .ad
@@ -90,7 +85,6 @@ Display information about \fIfilename\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR, \fB--force\fR\fR
 .ad
@@ -102,7 +96,6 @@ Use this option with caution.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR, \fB--help\fR\fR
 .ad
@@ -113,7 +106,6 @@ Show a list of options with a brief description of each.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR, \fB--inode\fR \fInum\fR\fR
 .ad
@@ -124,7 +116,6 @@ Show information about this inode.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR, \fB--info\fR\fR
 .ad
@@ -135,7 +126,6 @@ This option is not yet implemented.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR, \fB--quiet\fR\fR
 .ad
@@ -146,7 +136,6 @@ Suppress some debug, warning, and error messages.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR, \fB--sector\fR \fIrange\fR\fR
 .ad
@@ -157,7 +146,6 @@ Any files whose data is in this range of sectors will be displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR, \fB--version\fR\fR
 .ad
@@ -168,7 +156,6 @@ Show the version number, copyright, and license information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR, \fB--verbose\fR\fR
 .ad
@@ -216,13 +203,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ntfscmp.1m b/usr/src/man/man1m/ntfscmp.1m
index 3eab27e5a0..921ea78a0f 100644
--- a/usr/src/man/man1m/ntfscmp.1m
+++ b/usr/src/man/man1m/ntfscmp.1m
@@ -7,7 +7,7 @@
 .\" This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation ; either version 2 of the License, or (at your option) any later version.  This program is distributed
 .\" in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.  You should have received a copy of the GNU General Public License along with this program
 .\" (in the main directory of the Linux-NTFS distribution in the file COPYING);  if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 11-1307 USA
-.TH ntfscmp 1M "28 May 2009" "SunOS 5.11" "System Administration Commands"
+.TH NTFSCMP 1M "May 28, 2009"
 .SH NAME
 ntfscmp \- compare two NTFS file systems and report the differences
 .SH SYNOPSIS
@@ -42,7 +42,6 @@ Supported options are listed below. Options have both single-letter and
 full-name forms.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR, \fB--help\fR\fR
 .ad
@@ -53,7 +52,6 @@ Display help and exit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR, \fB--no-progress-bar\fR\fR
 .ad
@@ -64,7 +62,6 @@ Do not show progress bars.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR, \fB--verbose\fR\fR
 .ad
@@ -85,13 +82,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ntfscp.1m b/usr/src/man/man1m/ntfscp.1m
index db923c4a4e..e18047fa8e 100644
--- a/usr/src/man/man1m/ntfscp.1m
+++ b/usr/src/man/man1m/ntfscp.1m
@@ -7,7 +7,7 @@
 .\" This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation ; either version 2 of the License, or (at your option) any later version.  This program is distributed
 .\" in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.  You should have received a copy of the GNU General Public License along with this program
 .\" (in the main directory of the Linux-NTFS distribution in the file COPYING);  if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 11-1307 USA
-.TH ntfscp 1M "28 May 2009" "SunOS 5.11" "System Administration Commands"
+.TH NTFSCP 1M "May 28, 2009"
 .SH NAME
 ntfscp \- copy file to an NTFS volume
 .SH SYNOPSIS
@@ -47,7 +47,6 @@ can be combined. For example, \fB-fv\fR is the equivalent of \fB-f\fR \fB-v\fR.
 A full-name option can be abbreviated to a unique prefix of its name.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR, \fB--attribute\fR \fInum\fR\fR
 .ad
@@ -58,7 +57,6 @@ Write to attribute designated by \fInum\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR, \fB--force\fR\fR
 .ad
@@ -70,7 +68,6 @@ Use this option with caution.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR, \fB--help\fR\fR
 .ad
@@ -81,7 +78,6 @@ Show a list of options with a brief description of each one.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR, \fB--inode\fR\fR
 .ad
@@ -92,7 +88,6 @@ Treat \fIdestination\fR (see Synopsis) as inode number.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-N\fR, \fB--attr-name\fR \fIname\fR\fR
 .ad
@@ -103,7 +98,6 @@ Write to attribute with this name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR, \fB--no-action\fR\fR
 .ad
@@ -115,7 +109,6 @@ Volume will be opened read-only and no write will be done.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR, \fB--quiet\fR\fR
 .ad
@@ -126,7 +119,6 @@ Suppress some debug, warning, and error messages.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR, \fB--version\fR\fR
 .ad
@@ -137,7 +129,6 @@ Show the version number, copyright, and license information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR, \fB--verbose\fR\fR
 .ad
@@ -185,13 +176,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ntfsfix.1m b/usr/src/man/man1m/ntfsfix.1m
index 9624dfb8a7..c2e2ae13c2 100644
--- a/usr/src/man/man1m/ntfsfix.1m
+++ b/usr/src/man/man1m/ntfsfix.1m
@@ -7,7 +7,7 @@
 .\" This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation ; either version 2 of the License, or (at your option) any later version.  This program is distributed
 .\" in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.  You should have received a copy of the GNU General Public License along with this program
 .\" (in the main directory of the Linux-NTFS distribution in the file COPYING);  if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 11-1307 USA
-.TH ntfsfix 1M "28 May 2009" "SunOS 5.11" "System Administration Commands"
+.TH NTFSFIX 1M "May 28, 2009"
 .SH NAME
 ntfsfix \- fix common errors and force operating system to check NTFS
 .SH SYNOPSIS
@@ -33,7 +33,6 @@ operating system or in some other way and it cannot be mounted.
 Supported options are listed below.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR, \fB--help\fR\fR
 .ad
@@ -44,7 +43,6 @@ Show a list of options with a brief description of each.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR, \fB--version\fR\fR
 .ad
@@ -61,13 +59,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ntfsinfo.1m b/usr/src/man/man1m/ntfsinfo.1m
index fd8be13ae5..147d130a69 100644
--- a/usr/src/man/man1m/ntfsinfo.1m
+++ b/usr/src/man/man1m/ntfsinfo.1m
@@ -7,7 +7,7 @@
 .\" This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation ; either version 2 of the License, or (at your option) any later version.  This program is distributed
 .\" in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.  You should have received a copy of the GNU General Public License along with this program
 .\" (in the main directory of the Linux-NTFS distribution in the file COPYING);  if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 11-1307 USA
-.TH ntfsinfo 1M "28 May 2009" "SunOS 5.11" "System Administration Commands"
+.TH NTFSINFO 1M "May 28, 2009"
 .SH NAME
 ntfsinfo \- dump a file's attributes
 .SH SYNOPSIS
@@ -31,7 +31,6 @@ can be combined. For example, \fB-fv\fR is the equivalent of \fB-f\fR \fB-v\fR.
 A full-name option can be abbreviated to a unique prefix of its name.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR, \fB--file\fR \fIfile\fR\fR
 .ad
@@ -42,7 +41,6 @@ Show information about \fIfile\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR, \fB--force\fR\fR
 .ad
@@ -54,7 +52,6 @@ this option with caution.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR, \fB--help\fR\fR
 .ad
@@ -65,7 +62,6 @@ Show a list of options with a brief description of each.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR, \fB--inode\fR \fInum\fR\fR
 .ad
@@ -76,7 +72,6 @@ Show information about inode identified by \fInum\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR, \fB--mft\fR\fR
 .ad
@@ -87,7 +82,6 @@ Show information about the volume.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR, \fB--quiet\fR\fR
 .ad
@@ -98,7 +92,6 @@ Suppress some debug, warning, and error messages.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--notime\fR\fR
 .ad
@@ -109,7 +102,6 @@ Do not display timestamps in the output.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR, \fB--version\fR\fR
 .ad
@@ -120,7 +112,6 @@ Show the version number, copyright, and license information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR, \fB--verbose\fR\fR
 .ad
@@ -137,13 +128,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ntfslabel.1m b/usr/src/man/man1m/ntfslabel.1m
index 5a878bb673..f8ec796def 100644
--- a/usr/src/man/man1m/ntfslabel.1m
+++ b/usr/src/man/man1m/ntfslabel.1m
@@ -7,7 +7,7 @@
 .\" This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation ; either version 2 of the License, or (at your option) any later version.  This program is distributed
 .\" in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.  You should have received a copy of the GNU General Public License along with this program
 .\" (in the main directory of the Linux-NTFS distribution in the file COPYING);  if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 11-1307 USA
-.TH ntfslabel 1M "28 May 2009" "SunOS 5.11" "System Administration Commands"
+.TH NTFSLABEL 1M "May 28, 2009"
 .SH NAME
 ntfslabel \- display or change the label on an NTFS file system
 .SH SYNOPSIS
@@ -44,7 +44,6 @@ can be combined. For example, \fB-fv\fR is the equivalent of \fB-f\fR \fB-v\fR.
 A full-name option can be abbreviated to a unique prefix of its name.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR, \fB--force\fR\fR
 .ad
@@ -56,7 +55,6 @@ Use this option with caution.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR, \fB--help\fR\fR
 .ad
@@ -67,7 +65,6 @@ Show a list of options with a brief description of each.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR, \fB--no-action\fR\fR
 .ad
@@ -78,7 +75,6 @@ Do not actually write a new label to disk.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR, \fB--quiet\fR\fR
 .ad
@@ -89,7 +85,6 @@ Suppress some debug, warning, and error messages.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR, \fB--version\fR\fR
 .ad
@@ -100,7 +95,6 @@ Show the version number, copyright, and license information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR, \fB--verbose\fR\fR
 .ad
@@ -117,13 +111,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ntfsls.1m b/usr/src/man/man1m/ntfsls.1m
index 9d4d865109..8202a955e5 100644
--- a/usr/src/man/man1m/ntfsls.1m
+++ b/usr/src/man/man1m/ntfsls.1m
@@ -7,7 +7,7 @@
 .\" This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation ; either version 2 of the License, or (at your option) any later version.  This program is distributed
 .\" in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.  You should have received a copy of the GNU General Public License along with this program
 .\" (in the main directory of the Linux-NTFS distribution in the file COPYING);  if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 11-1307 USA
-.TH ntfsls 1M "28 May 2009" "SunOS 5.11" "System Administration Commands"
+.TH NTFSLS 1M "May 28, 2009"
 .SH NAME
 ntfsls \- list directory contents on an NTFS file system
 .SH SYNOPSIS
@@ -32,7 +32,6 @@ can be combined. For example, \fB-fv\fR is the equivalent of \fB-f\fR \fB-v\fR.
 A full-name option can be abbreviated to a unique prefix of its name.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR, \fB--all\fR\fR
 .ad
@@ -44,7 +43,6 @@ namespace are not displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR, \fB--classify\fR\fR
 .ad
@@ -63,7 +61,6 @@ Append one of the indicators shown below to entries.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR, \fB--force\fR\fR
 .ad
@@ -75,7 +72,6 @@ partition stored in a normal file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR, \fB--help\fR\fR
 .ad
@@ -86,7 +82,6 @@ Display usage information and exit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR, \fB--inode\fR\fR
 .ad
@@ -98,7 +93,6 @@ NTFS terminology.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR, \fB--long\fR\fR
 .ad
@@ -109,7 +103,6 @@ Use a long listing format.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR, \fB--path\fR \fIpath\fR\fR
 .ad
@@ -121,7 +114,6 @@ which to display information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR, \fB--quiet\fR\fR
 .ad
@@ -132,7 +124,6 @@ Suppress some debug, warning, and error messages.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR, \fB--recursive\fR\fR
 .ad
@@ -143,7 +134,6 @@ Show the contents of all directories beneath the specified directory.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR, \fB--system\fR\fR
 .ad
@@ -155,7 +145,6 @@ character will not be listed, as these files are usually system files.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR, \fB--verbose\fR\fR
 .ad
@@ -166,7 +155,6 @@ Display more debug, warning, and error messages.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR, \fB--version\fR\fR
 .ad
@@ -177,7 +165,6 @@ Display the \fBntfsls\fR version number and exit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR, \fB--dos\fR\fR
 .ad
@@ -195,13 +182,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ntfsprogs.1m b/usr/src/man/man1m/ntfsprogs.1m
index 063d4b328d..8be9e8f989 100644
--- a/usr/src/man/man1m/ntfsprogs.1m
+++ b/usr/src/man/man1m/ntfsprogs.1m
@@ -7,7 +7,7 @@
 .\" This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation ; either version 2 of the License, or (at your option) any later version.  This program is distributed
 .\" in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.  You should have received a copy of the GNU General Public License along with this program
 .\" (in the main directory of the Linux-NTFS distribution in the file COPYING);  if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 11-1307 USA
-.TH ntfsprogs 1M "28 May 2009" "SunOS 5.11" "System Administration Commands"
+.TH NTFSPROGS 1M "May 28, 2009"
 .SH NAME
 ntfsprogs \- list of NTFS tools
 .SH SYNOPSIS
@@ -24,7 +24,6 @@ library. The tools are available for free and come with full source code. The
 tools are listed below.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmkntfs\fR(1M)\fR
 .ad
@@ -35,7 +34,6 @@ Create an NTFS filesystem.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBntfscat\fR(1M)\fR
 .ad
@@ -46,7 +44,6 @@ Dump a file's content to the standard output.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBntfsclone\fR(1M)\fR
 .ad
@@ -57,7 +54,6 @@ Efficiently clone, backup, restore, or rescue NTFS.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBntfscluster\fR(1M)\fR
 .ad
@@ -68,7 +64,6 @@ Locate the files that use the specified  sectors or clusters.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBntfscmp\fR(1M)\fR
 .ad
@@ -79,7 +74,6 @@ Compare two NTFS file systems and report the differences.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBntfscp\fR(1M)\fR
 .ad
@@ -90,7 +84,6 @@ Copy a file to an NTFS volume.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBntfsfix\fR(1M)\fR
 .ad
@@ -102,7 +95,6 @@ system perform a thorough check next time it boots.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBntfsinfo\fR(1M)\fR
 .ad
@@ -113,7 +105,6 @@ Show information about NTFS or one of the files or directories within it.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBntfslabel\fR(1M)\fR
 .ad
@@ -124,7 +115,6 @@ Show, or set, an NTFS filesystem's volume label.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBntfsls\fR(1M)\fR
 .ad
@@ -135,7 +125,6 @@ List information about files in a directory residing on an NTFS.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBntfsmount(1M)\fR (not a SunOS man page)\fR
 .ad
@@ -146,7 +135,6 @@ Read-write NTFS user space driver.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBntfsresize\fR(1M)\fR
 .ad
@@ -157,7 +145,6 @@ Resize NTFS without losing data.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBntfsundelete\fR(1M)\fR
 .ad
@@ -174,13 +161,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ntfsresize.1m b/usr/src/man/man1m/ntfsresize.1m
index 7fe15b70cb..34a72a9b09 100644
--- a/usr/src/man/man1m/ntfsresize.1m
+++ b/usr/src/man/man1m/ntfsresize.1m
@@ -7,7 +7,7 @@
 .\" This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation ; either version 2 of the License, or (at your option) any later version.  This program is distributed
 .\" in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.  You should have received a copy of the GNU General Public License along with this program
 .\" (in the main directory of the Linux-NTFS distribution in the file COPYING);  if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 11-1307 USA
-.TH ntfsresize 1M "21 May 2009" "SunOS 5.11" "System Administration Commands"
+.TH NTFSRESIZE 1M "May 21, 2009"
 .SH NAME
 ntfsresize \- resize an NTFS file system without data loss
 .SH SYNOPSIS
@@ -109,7 +109,6 @@ can be combined. For example, \fB-fv\fR is the equivalent of \fB-f\fR \fB-v\fR.
 A full-name option can be abbreviated to a unique prefix of its name.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR, \fB--bad-sectors\fR\fR
 .ad
@@ -130,7 +129,6 @@ This option has no effect if a disk has no bad sectors.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR, \fB--force\fR\fR
 .ad
@@ -145,7 +143,6 @@ times without booting into Windows between each resizing step.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR, \fB--help\fR\fR
 .ad
@@ -156,7 +153,6 @@ Display usage information and exit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR, \fB--info\fR\fR
 .ad
@@ -181,7 +177,6 @@ opened read-only.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR, \fB--no-action\fR\fR
 .ad
@@ -195,7 +190,6 @@ test run passed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR, \fB--no-progress-bar\fR\fR
 .ad
@@ -206,7 +200,6 @@ Do not display progress bars during \fBntfsresize\fR operation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR, \fB--size\fR \fIsize\fR[k|M|G]]\fR
 .ad
@@ -223,7 +216,6 @@ Before performing an actual resizing, run \fBntfsresize\fR with the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR, \fB--verbose\fR\fR
 .ad
@@ -234,7 +226,6 @@ Display copious output.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR, \fB--version\fR\fR
 .ad
@@ -255,13 +246,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ntfsundelete.1m b/usr/src/man/man1m/ntfsundelete.1m
index b3e158fd57..62ed3ad473 100644
--- a/usr/src/man/man1m/ntfsundelete.1m
+++ b/usr/src/man/man1m/ntfsundelete.1m
@@ -7,7 +7,7 @@
 .\" This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation ; either version 2 of the License, or (at your option) any later version.  This program is distributed
 .\" in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.  You should have received a copy of the GNU General Public License along with this program
 .\" (in the main directory of the Linux-NTFS distribution in the file COPYING);  if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 11-1307 USA
-.TH ntfsundelete 1M "22 May 2009" "SunOS 5.11" "System Administration Commands"
+.TH NTFSUNDELETE 1M "May 22, 2009"
 .SH NAME
 ntfsundelete \- recover a deleted file from an NTFS volume
 .SH SYNOPSIS
@@ -23,7 +23,6 @@ The \fBntfsundelete\fR utility can, under the right circumstances, recover a
 deleted file from an NTFS volume. The command has three modes of operation:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBScan\fR\fR
 .ad
@@ -36,7 +35,6 @@ and size of each deleted file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBUndelete\fR\fR
 .ad
@@ -49,7 +47,6 @@ much of the data as possible. It saves the result to another location.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCopy\fR\fR
 .ad
@@ -111,7 +108,6 @@ can be combined. For example, \fB-fv\fR is the equivalent of \fB-f\fR \fB-v\fR.
 A full-name option can be abbreviated to a unique prefix of its name.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR, \fB--byte\fR \fInum\fR\fR
 .ad
@@ -123,7 +119,6 @@ Fill in the parts of unrecoverable file clusters with byte represented by
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR, \fB--case\fR\fR
 .ad
@@ -135,7 +130,6 @@ case-sensitive. The default filename search is case-insensitive.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR, \fB--copy\fR \fIrange\fR\fR
 .ad
@@ -148,7 +142,6 @@ combined with the \fB--output\fR and \fB--destination\fR options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR, \fB--destination\fR \fIdir\fR\fR
 .ad
@@ -160,7 +153,6 @@ Specify the location of the output file for the \fB--copy\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR, \fB--force\fR\fR
 .ad
@@ -172,7 +164,6 @@ this option with caution.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR, \fB--help\fR\fR
 .ad
@@ -183,7 +174,6 @@ Show a list of options with a brief description of each one.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR, \fB--inodes\fR \fIrange\fR\fR
 .ad
@@ -196,7 +186,6 @@ separated by a dash (\fB-\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR, \fB--match\fR \fIpattern\fR\fR
 .ad
@@ -211,7 +200,6 @@ option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-O\fR, \fB--optimistic\fR\fR
 .ad
@@ -222,7 +210,6 @@ Recover parts of the file even if they are currently marked as in use.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR, \fB--output\fR \fIfile\fR\fR
 .ad
@@ -234,7 +221,6 @@ options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR, \fB--parent\fR\fR
 .ad
@@ -245,7 +231,6 @@ Display the parent directory of a deleted file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR, \fB--percentage\fR \fInum\fR\fR
 .ad
@@ -257,7 +242,6 @@ Filter the output of the \fB--scan\fR option by matching only files with
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR, \fB--quiet\fR\fR
 .ad
@@ -269,7 +253,6 @@ Reduce the amount of output to a minimum. This option is not useful with the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR, \fB--scan\fR\fR
 .ad
@@ -287,7 +270,6 @@ much of a file can potentially be recovered.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR, \fB--size\fR \fIrange\fR\fR
 .ad
@@ -302,7 +284,6 @@ terabytes respectively.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--time\fR \fIsince\fR\fR
 .ad
@@ -316,7 +297,6 @@ months, or years.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR, \fB--truncate\fR\fR
 .ad
@@ -330,7 +310,6 @@ the file to exactly that size.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR, \fB--undelete\fR\fR
 .ad
@@ -346,7 +325,6 @@ When the file is recovered it will be given its original name, unless the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR, \fB--verbose\fR \fI\fR\fR
 .ad
@@ -357,7 +335,6 @@ Increase the amount of output that \fBntfsundelete\fR displays.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR, \fB--version\fR \fI\fR\fR
 .ad
@@ -476,13 +453,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/nwamd.1m b/usr/src/man/man1m/nwamd.1m
index 3e14938b42..f27b262132 100644
--- a/usr/src/man/man1m/nwamd.1m
+++ b/usr/src/man/man1m/nwamd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH nwamd 1M "24 Nov 2008" "SunOS 5.11" "System Administration Commands"
+.TH NWAMD 1M "Nov 24, 2008"
 .SH NAME
 nwamd \- network auto-magic daemon
 .SH SYNOPSIS
@@ -211,13 +211,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityVolatile
+Interface Stability	Volatile
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/obpsym.1m b/usr/src/man/man1m/obpsym.1m
index 001dedd1e1..f9b35d386e 100644
--- a/usr/src/man/man1m/obpsym.1m
+++ b/usr/src/man/man1m/obpsym.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH obpsym 1M "13 Dec 2001" "SunOS 5.11" "System Administration Commands"
+.TH OBPSYM 1M "Dec 13, 2001"
 .SH NAME
 obpsym \- Kernel Symbolic Debugging for OpenBoot Firmware
 .SH SYNOPSIS
@@ -71,7 +71,6 @@ and executing a matching word in its vocabulary.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/system\fR\fR
 .ad
@@ -82,7 +81,6 @@ system configuration information file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/platform/\fR\fIplatform-name\fR\fB/kernel/misc/obpsym\fR\fR
 .ad
diff --git a/usr/src/man/man1m/oplhpd.1m b/usr/src/man/man1m/oplhpd.1m
index 45732921bb..c7f5f62d29 100644
--- a/usr/src/man/man1m/oplhpd.1m
+++ b/usr/src/man/man1m/oplhpd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH oplhpd 1M "23 May 2006" "SunOS 5.11" "System Administration Commands"
+.TH OPLHPD 1M "May 23, 2006"
 .SH NAME
 oplhpd \- Hot plug daemon for SPARC Enterprise Server line
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/platform/SUNW,SPARC-Enterprise/lib/sparcv9/lib/oplhpd\fR 
+\fB/usr/platform/SUNW,SPARC-Enterprise/lib/sparcv9/lib/oplhpd\fR
 .fi
 
 .SH DESCRIPTION
@@ -53,13 +53,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/parted.1m b/usr/src/man/man1m/parted.1m
index dd9e236726..31cb0f4286 100644
--- a/usr/src/man/man1m/parted.1m
+++ b/usr/src/man/man1m/parted.1m
@@ -4,7 +4,7 @@
 .\" This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version.  This program is distributed
 .\" in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.  You should have received a copy of the GNU General Public License along with this program.
 .\" If not, see: http://www.gnu.org/copyleft/gpl.html
-.TH parted 1M "27 May 2009" "SunOS 5.11" "System Administration Commands"
+.TH PARTED 1M "May 27, 2009"
 .SH NAME
 parted \- partition manipulation program
 .SH SYNOPSIS
@@ -34,12 +34,10 @@ subcommands, most of which have their own options and operands. These
 subcommands are described below. \fBparted\fR has an optional operand:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdevice\fR\fR
 .ad
 .RS 10n
-.rt  
 The block device to be used. When none is given, \fBparted\fR uses the first
 block device it finds.
 .RE
@@ -50,7 +48,6 @@ block device it finds.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR, \fB--help\fR\fR
 .ad
@@ -61,7 +58,6 @@ Displays a help message.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR, \fB--interactive\fR\fR
 .ad
@@ -72,7 +68,6 @@ Prompts for user intervention.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR, \fB--list\fR\fR
 .ad
@@ -83,7 +78,6 @@ Lists partition layout on all block devices.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR, \fB--machine\fR\fR
 .ad
@@ -94,7 +88,6 @@ Displays machine-parseable output.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR, \fB--script\fR\fR
 .ad
@@ -105,7 +98,6 @@ Never prompts for user intervention.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR, \fB--version\fR\fR
 .ad
@@ -121,7 +113,6 @@ If you omit a subcommand in a \fBparted\fR command line, the utility issues a
 command prompt.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcheck\fR \fIpartition\fR\fR
 .ad
@@ -132,7 +123,6 @@ Do a simple check on \fIpartition\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcp\fR [\fIsource-device\fR] \fIsource\fR \fIdest\fR\fR
 .ad
@@ -145,7 +135,6 @@ current device.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhelp\fR \fIcommand\fR\fR
 .ad
@@ -156,7 +145,6 @@ Display general help, or help on a command, if specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmkfs\fR \fIpartition\fR \fIfs-type\fR\fR
 .ad
@@ -168,7 +156,6 @@ Make a filesystem \fIfs-type\fR on partition. \fIfs-type\fR can be one of
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmklabel\fR \fIlabel-type\fR\fR
 .ad
@@ -181,7 +168,6 @@ should be one of \fBbsd\fR, \fBdvh\fR, \fBgpt\fR, \fBloop\fR, \fBmac\fR,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmkpart\fR \fIpart-type\fR [\fIfs-type\fR] \fIstart\fR \fIend\fR\fR
 .ad
@@ -196,7 +182,6 @@ should be one of \fBprimary\fR, \fBlogical\fR, or \fBextended\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmkpartfs\fR \fIpart-type\fR \fIfs-type\fR \fIstart\fR \fIend\fR\fR
 .ad
@@ -208,7 +193,6 @@ Make a \fIpart-type\fR partition with file system \fIfs-type\fR, beginning at
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmove\fR \fIpartition\fR \fIstart\fR \fIend\fR\fR
 .ad
@@ -220,7 +204,6 @@ that \fBmove\fR never changes the minor number.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBname\fR \fIpartition\fR \fIname\fR\fR
 .ad
@@ -232,7 +215,6 @@ and GPT disk labels. The name can be placed in quotes, if necessary.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprint\fR\fR
 .ad
@@ -243,7 +225,6 @@ Display the partition table.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBquit\fR\fR
 .ad
@@ -254,7 +235,6 @@ Exit from \fBparted\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrescue\fR \fIstart\fR \fIend\fR\fR
 .ad
@@ -267,7 +247,6 @@ an entry for it in the partition table.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBresize\fR \fIpartition\fR \fIstart\fR \fIend\fR\fR
 .ad
@@ -279,7 +258,6 @@ ends at \fIend\fR (by default, in megabytes).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrm\fR \fIpartition\fR\fR
 .ad
@@ -290,7 +268,6 @@ Delete \fIpartition\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBselect\fR \fIdevice\fR\fR
 .ad
@@ -303,7 +280,6 @@ raid device, or an SVM or LVM logical volume if necessary.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBset\fR \fIpartition\fR \fIflag\fR \fIstate\fR\fR
 .ad
@@ -317,7 +293,6 @@ flags are: \fBboot\fR, \fBroot\fR, \fBswap\fR, \fBhidden\fR, \fBraid\fR,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunit\fR \fIunit\fR\fR
 .ad
@@ -333,7 +308,6 @@ for input, and a human-friendly form for output).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBversion\fR\fR
 .ad
@@ -350,13 +324,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/passmgmt.1m b/usr/src/man/man1m/passmgmt.1m
index e1a3397863..f654f4d015 100644
--- a/usr/src/man/man1m/passmgmt.1m
+++ b/usr/src/man/man1m/passmgmt.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH passmgmt 1M "27 Aug 2007" "SunOS 5.11" "System Administration Commands"
+.TH PASSMGMT 1M "Aug 27, 2007"
 .SH NAME
 passmgmt \- password files management
 .SH SYNOPSIS
@@ -50,24 +50,20 @@ be removed manually.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-c\fR \fIcomment\fR\fR
 .ad
 .RS 16n
-.rt  
 A short description of the login, enclosed in quotes. It is limited to a
 maximum of 128 characters and defaults to an empty field.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIexpire\fR\fR
 .ad
 .RS 16n
-.rt  
 Specify the expiration date for a login. After this date, no user will be able
 to access this login. The expire option argument is a date entered using one of
 the date formats included in the template file \fB/etc/datemsk\fR. See
@@ -76,12 +72,10 @@ the date formats included in the template file \fB/etc/datemsk\fR. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIinactive\fR\fR
 .ad
 .RS 16n
-.rt  
 The maximum number of days allowed between uses of a login ID before that
 \fBID\fR is declared invalid. Normal values are positive integers. A value of
 \fB0\fR defeats the status.
@@ -91,36 +85,30 @@ Changing the password reactivates an account for the inactivity period.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-g\fR \fIgid\fR\fR
 .ad
 .RS 16n
-.rt  
 \fBGID\fR of \fIname\fR. This number must range from 0 to the maximum
 non-negative value for the system. The default is 1.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-h\fR \fIhomedir\fR\fR
 .ad
 .RS 16n
-.rt  
 Home directory of \fIname\fR. It is limited to a maximum of 256 characters and
 defaults to \fB/usr/\fR\fIname\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-K\fR \fIkey=value\fR\fR
 .ad
 .RS 16n
-.rt  
 Set a \fIkey=value\fR pair. See \fBuser_attr\fR(4), \fBauth_attr\fR(4), and
 \fBprof_attr\fR(4). The valid \fIkey=value\fR pairs are defined in
 \fBuser_attr\fR(4), but the "type" key is subject to the \fBusermod\fR(1M) and
@@ -130,12 +118,10 @@ with multiple \fB-K\fR options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR \fIskel_dir\fR\fR
 .ad
 .RS 16n
-.rt  
 A directory that contains skeleton information (such as \fB\&.profile\fR) that
 can be copied into a new user's home directory. This directory must already
 exist. The system provides the \fB/etc/skel\fR directory that can be used for
@@ -144,12 +130,10 @@ this purpose.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlogname\fR\fR
 .ad
 .RS 16n
-.rt  
 This option changes the \fIname\fR to \fIlogname\fR. It is used only with the
 \fB-m\fR option. The total size of each login entry is limited to a maximum of
 511 bytes in each of the password files.
@@ -157,24 +141,20 @@ This option changes the \fIname\fR to \fIlogname\fR. It is used only with the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 16n
-.rt  
 This option allows a \fBUID\fR to be non-unique. It is used only with the
 \fB-u\fR option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-s\fR \fIshell\fR\fR
 .ad
 .RS 16n
-.rt  
 Login shell for \fIname\fR. It should be the full pathname of the program that
 will be executed when the user logs in. The maximum size of \fIshell\fR is 256
 characters. The default is for this field to be empty and to be interpreted as
@@ -183,12 +163,10 @@ characters. The default is for this field to be empty and to be interpreted as
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-u\fR \fIuid\fR\fR
 .ad
 .RS 16n
-.rt  
 \fBUID\fR of the \fIname\fR. This number must range from 0 to the maximum
 non-negative value for the system. It defaults to the next available \fBUID\fR
 greater than 99. Without the \fB-o\fR option, it enforces the uniqueness of a
@@ -215,13 +193,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
@@ -236,113 +213,93 @@ Interface StabilityEvolving
 The \fBpassmgmt\fR command exits with one of the following values:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Success.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Permission denied.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Invalid command syntax. Usage message of the \fBpassmgmt\fR command is
 displayed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 5n
-.rt  
 Invalid argument provided to option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR\fR
 .ad
 .RS 5n
-.rt  
 UID in use.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB5\fR\fR
 .ad
 .RS 5n
-.rt  
 Inconsistent password files (for example, \fIname\fR is in the
 \fB/etc/passwd\fR file and not in the \fB/etc/shadow\fR file, or vice versa).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB6\fR\fR
 .ad
 .RS 5n
-.rt  
 Unexpected failure. Password files unchanged.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB7\fR\fR
 .ad
 .RS 5n
-.rt  
 Unexpected failure. Password file(s) missing.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB8\fR\fR
 .ad
 .RS 5n
-.rt  
 Password file(s) busy. Try again later.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB9\fR\fR
 .ad
 .RS 5n
-.rt  
 \fIname\fR does not exist (if \fB-m\fR or \fB-d\fR is specified), already
 exists (if \fB-a\fR is specified), or \fBlogname\fR already exists (if
 \fB\fR\fB-m\fR \fB-l\fR is specified).
diff --git a/usr/src/man/man1m/pbind.1m b/usr/src/man/man1m/pbind.1m
index 9d19c0e644..bcedec12f4 100644
--- a/usr/src/man/man1m/pbind.1m
+++ b/usr/src/man/man1m/pbind.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH pbind 1M "25 Feb 2008" "SunOS 5.11" "System Administration Commands"
+.TH PBIND 1M "Feb 25, 2008"
 .SH NAME
 pbind \- control and query bindings of processes or LWPs
 .SH SYNOPSIS
@@ -61,7 +61,6 @@ any process that has the same effective user ID as the user.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR \fIprocessor_id\fR\fR
 .ad
@@ -76,7 +75,6 @@ on-line. Use the \fBpsrinfo\fR command to determine whether or not
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
@@ -92,7 +90,6 @@ be displayed. The bindings of a subset of LWPs can be displayed by appending
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Q\fR\fR
 .ad
@@ -105,7 +102,6 @@ individual LWPs will be displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
@@ -117,7 +113,6 @@ allowing them to be executed on any on-line processor.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-U\fR\fR
 .ad
@@ -133,7 +128,6 @@ to any processor if no argument is specified.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpid\fR\fR
 .ad
@@ -144,7 +138,6 @@ The process \fBID\fR of the process to be controlled or queried.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIlwpid\fR\fR
 .ad
@@ -165,7 +158,6 @@ syntax for selecting \fBLWP\fR \fBID\fRs is as follows:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIprocessor_id\fR\fR
 .ad
@@ -263,7 +255,6 @@ lwp id 149/5: 2
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -274,7 +265,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
@@ -291,7 +281,6 @@ An error occurred.
 .SH DIAGNOSTICS
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpbind: cannot query pid 31: No such process\fR\fR
 .ad
@@ -302,7 +291,6 @@ The process specified did not exist or has exited.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpbind: cannot bind pid 31: Not owner\fR\fR
 .ad
@@ -313,7 +301,6 @@ The user does not have permission to bind the process.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpbind: cannot bind pid 31: Invalid argument\fR\fR
 .ad
diff --git a/usr/src/man/man1m/picld.1m b/usr/src/man/man1m/picld.1m
index c224675055..debb8bf9af 100644
--- a/usr/src/man/man1m/picld.1m
+++ b/usr/src/man/man1m/picld.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH picld 1M "10 Aug 2004" "SunOS 5.11" "System Administration Commands"
+.TH PICLD 1M "Aug 10, 2004"
 .SH NAME
 picld \- PICL daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/picl/picld\fR 
+\fB/usr/lib/picl/picld\fR
 .fi
 
 .SH DESCRIPTION
@@ -98,23 +98,19 @@ for accessing the \fBPICL\fR tree.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/run/picld_door\fR\fR
 .ad
 .RS 23n
-.rt  
 \fBPICL\fR daemon door
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/picl/picld\fR\fR
 .ad
 .RS 23n
-.rt  
 \fBPICL\fR daemon
 .RE
 
diff --git a/usr/src/man/man1m/ping.1m b/usr/src/man/man1m/ping.1m
index e23c15ea62..6aa5ecc604 100644
--- a/usr/src/man/man1m/ping.1m
+++ b/usr/src/man/man1m/ping.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ping 1M "7 Sep 2006" "SunOS 5.11" "System Administration Commands"
+.TH PING 1M "Sep 7, 2006"
 .SH NAME
 ping \- send ICMP (ICMP6) ECHO_REQUEST packets to network hosts
 .SH SYNOPSIS
@@ -15,10 +15,10 @@ ping \- send ICMP (ICMP6) ECHO_REQUEST packets to network hosts
 
 .LP
 .nf
-\fB/usr/sbin/ping\fR \fB-s\fR [\fB-l\fR | \fB-U\fR] [\fB-abdlLnrRv\fR] [\fB-A\fR \fIaddr_family\fR] 
-     [\fB-c\fR \fItraffic_class\fR] [\fB-g\fR \fIgateway\fR [\fB-g\fR \fIgateway\fR...]] 
-     [\fB-N\fR \fInext_hop_router\fR] [\fB-F\fR \fIflow_label\fR] [\fB-I\fR \fIinterval\fR] 
-     [\fB-i\fR \fIinterface\fR] [\fB-P\fR \fItos\fR] [\fB-p\fR \fIport\fR] [\fB-t\fR \fIttl\fR] \fIhost\fR 
+\fB/usr/sbin/ping\fR \fB-s\fR [\fB-l\fR | \fB-U\fR] [\fB-abdlLnrRv\fR] [\fB-A\fR \fIaddr_family\fR]
+     [\fB-c\fR \fItraffic_class\fR] [\fB-g\fR \fIgateway\fR [\fB-g\fR \fIgateway\fR...]]
+     [\fB-N\fR \fInext_hop_router\fR] [\fB-F\fR \fIflow_label\fR] [\fB-I\fR \fIinterval\fR]
+     [\fB-i\fR \fIinterface\fR] [\fB-P\fR \fItos\fR] [\fB-p\fR \fIport\fR] [\fB-t\fR \fIttl\fR] \fIhost\fR
      [\fIdata_size\fR] [\fInpackets\fR]
 .fi
 
@@ -73,12 +73,10 @@ verify that the local network interface is running.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR\ \fIaddr_family\fR\fR
 .ad
 .RS 24n
-.rt  
 Specify the address family of the target host. \fIaddr_family\fR can be either
 \fBinet\fR or \fBinet6\fR. Address family determines which protocol to use. For
 an argument of \fBinet\fR, IPv4 is used. For \fBinet6\fR, IPv6 is used.
@@ -101,24 +99,20 @@ host is unknown and exits.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\ \fIflow_label\fR\fR
 .ad
 .RS 24n
-.rt  
 Specify the flow label of probe packets. The value must be an integer in the
 range from 0 to 1048575. This option is valid only on IPv6.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR \fIinterval\fR\fR
 .ad
 .RS 24n
-.rt  
 Turn on the statistics mode and specify the interval between successive
 transmissions. The default is one second. See the discussion of the \fB-s\fR
 option.
@@ -126,12 +120,10 @@ option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR\fR
 .ad
 .RS 24n
-.rt  
 Turn off loopback of multicast packets. Normally, members are in the host group
 on the outgoing interface, a copy of the multicast packets will be delivered to
 the local machine.
@@ -139,12 +131,10 @@ the local machine.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-N\fR \fInext_hop_router\fR\fR
 .ad
 .RS 24n
-.rt  
 Specify a next-hop router so that the probe packet goes through the specified
 router along its path to the target host. This option essentially bypasses the
 system routing table and leaves the probe packet header unmodified. Only one
@@ -153,12 +143,10 @@ next-hop router can be specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR\ \fItos\fR\fR
 .ad
 .RS 24n
-.rt  
 Set the type of service (\fItos\fR) in probe packets to the specified value.
 The default is zero. The value must be an integer in the range from 0 to 255.
 Gateways also in the path can route the probe packet differently, depending
@@ -168,12 +156,10 @@ valid only on IPv4.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR\fR
 .ad
 .RS 24n
-.rt  
 Record route. Sets the IPv4 record route option, which stores the route of the
 packet inside the IPv4 header. The contents of the record route are only
 printed if the \fB-v\fR and \fB-s\fR options are given. They are only set on
@@ -183,12 +169,10 @@ echos, or the \fB-l\fR option is given. This option is valid only on IPv4.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-U\fR\fR
 .ad
 .RS 24n
-.rt  
 Send \fBUDP\fR packets instead of \fBICMP\fR (\fBICMP6\fR) packets. \fBping\fR
 sends \fBUDP\fR packets to consecutive ports expecting to receive back
 \fBICMP\fR (\fBICMP6\fR) \fBPORT_UNREACHABLE\fR from the target host.
@@ -196,12 +180,10 @@ sends \fBUDP\fR packets to consecutive ports expecting to receive back
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 24n
-.rt  
 \fBping\fR all addresses, both IPv4 and IPv6, of the multihomed destination.
 The output appears as if \fBping\fR has been run once for each \fBIP\fR address
 of the destination. If this option is used together with \fB-A\fR, \fBping\fR
@@ -214,12 +196,10 @@ to each \fBIP\fR address of the destination and then exits.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR\fR
 .ad
 .RS 24n
-.rt  
 Bypass the global IPsec policy and send and receive packets in the clear for
 this connection only. This option can be used to troubleshoot network
 connectivity independent of IPsec. Because this option bypasses system-wide
@@ -229,12 +209,10 @@ the sys_net_config privilege.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\ \fItraffic_class\fR\fR
 .ad
 .RS 24n
-.rt  
 Specify the traffic class of probe packets. The value must be an integer in the
 range from 0 to 255. Gateways along the path can route the probe packet
 differently, depending upon the value of \fItraffic_class\fR set in the probe
@@ -243,23 +221,19 @@ packet. This option is valid only on IPv6.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 24n
-.rt  
 Set the \fBSO_DEBUG\fR socket option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR\ \fIgateway\fR\fR
 .ad
 .RS 24n
-.rt  
 Specify a loose source route gateway so that the probe packet goes through the
 specified host along the path to the target host. The maximum number of
 gateways is 8 for IPv4 and 127 for IPv6. Note that some factors such as the
@@ -268,12 +242,10 @@ link \fBMTU\fR can further limit the number of gateways for IPv6.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIinterface_address\fR\fR
 .ad
 .RS 24n
-.rt  
 Specify the outgoing interface address to use for multicast packets for IPv4
 and both multicast and unicast packets for IPv6. The default interface address
 for multicast packets is determined from the (unicast) routing tables.
@@ -284,12 +256,10 @@ interface index, for example \fB2\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 24n
-.rt  
 Use to send the probe packet to the given host and back again using loose
 source routing. Usually specified with the \fB-R\fR option. If any gateways are
 specified using \fB-g\fR, they are visited twice, both to and from the
@@ -298,12 +268,10 @@ destination. This option is ignored if the \fB-U\fR option is used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 24n
-.rt  
 Show network addresses as numbers. \fBping\fR normally does a reverse name
 lookup on the IP addresses it extracts from the packets received. The \fB-n\fR
 option blocks the reverse lookup, so \fBping\fR prints IP addresses instead of
@@ -312,12 +280,10 @@ host names.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\ \fIport\fR\fR
 .ad
 .RS 24n
-.rt  
 Set the base \fBUDP\fR \fIport\fR number used in probes. This option is used
 with the \fB-U\fR option. The default base \fIport\fR number is 33434. The
 \fBping\fR utility starts setting the destination port number of \fBUDP\fR
@@ -326,12 +292,10 @@ packets to this base and increments it by one at each probe.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 24n
-.rt  
 Bypass the normal routing tables and send directly to a host on an attached
 network. If the host is not on a directly attached network, an error is
 returned. This option can be used to \fBping\fR a local host through an
@@ -340,23 +304,19 @@ interface that has been dropped by the router daemon. See \fBin.routed\fR(1M).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 24n
-.rt  
 Send one datagram per second and collect statistics.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\ \fIttl\fR\fR
 .ad
 .RS 24n
-.rt  
 Specify the IPv4 time to live, or IPv6 hop limit, for unicast and multicast
 packets. The default time to live (hop limit) for unicast packets can be set
 with the \fBndd\fR module, \fB/dev/icmp\fR, using the \fBicmp_ipv4_ttl\fR
@@ -367,12 +327,10 @@ For further information, see\fBndd\fR(1M).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 24n
-.rt  
 Verbose output. List any \fBICMP\fR (\fBICMP6\fR) packets, other than replies
 from the target host.
 .RE
@@ -380,12 +338,10 @@ from the target host.
 .SH OPERANDS
 .sp
 .ne 2
-.mk
 .na
 \fB\fIhost\fR\fR
 .ad
 .RS 8n
-.rt  
 The network host
 .RE
 
@@ -409,9 +365,9 @@ PING xyz: 56 data bytes
 64 bytes from xyz (fec0::114:a00:20ff:ab3d:83ed): icmp_seq=3. time=4.943 ms
 64 bytes from xyz (4::114:a00:20ff:ab3d:83ed): icmp_seq=4. time=0.485 ms
 64 bytes from xyz (fec0::114:a00:20ff:ab3d:83ed): icmp_seq=5. time=2.201 ms
-^C     
-----xyz PING Statistics----     
-6 packets transmitted, 6 packets received, 0% packet loss     
+^C
+----xyz PING Statistics----
+6 packets transmitted, 6 packets received, 0% packet loss
 round-trip (ms)  min/avg/stddev = 0.479/1.583/4.943/1.823
 .fi
 .in -2
@@ -438,23 +394,19 @@ This example shows the \fBndd\fR module, \fB/dev/icmp\fR, used to set the
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Successful operation; the machine is alive.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-zero\fR
 .ad
 .RS 12n
-.rt  
 An error has occurred. Either a malformed argument has been specified, or the
 machine was not alive.
 .RE
diff --git a/usr/src/man/man1m/pkg2du.1m b/usr/src/man/man1m/pkg2du.1m
index 5f9c561c4c..23f9dc1cb6 100644
--- a/usr/src/man/man1m/pkg2du.1m
+++ b/usr/src/man/man1m/pkg2du.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH pkg2du 1M "23 Sep 2009" "SunOS 5.11" "System Administration Commands"
+.TH PKG2DU 1M "Sep 23, 2009"
 .SH NAME
 pkg2du \- convert driver packages to Driver Update format
 .SH SYNOPSIS
@@ -33,7 +33,6 @@ are specified, then both an ISO image and a directory tree are generated.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdir\fR\fR
 .ad
@@ -44,7 +43,6 @@ Directory where the DU directory should be created.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIiso\fR\fR
 .ad
@@ -55,7 +53,6 @@ Create a Solaris ISO image of the DU directory.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -66,7 +63,6 @@ If \fB\fIdir\fR/DU\fR or \fIiso\fR exists, remove it without asking first.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlabel\fR\fR
 .ad
@@ -77,7 +73,6 @@ Label/volume name of the ISO image (if \fB-o\fR option is specified).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrelease\fR\fR
 .ad
@@ -90,7 +85,6 @@ of the currently running Solaris is used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -105,7 +99,6 @@ Verbose. Multiple \fB-v\fR options increase verbosity.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpkg\fR [\fIpkg\fR...]\fR
 .ad
@@ -139,13 +132,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/pkgadd.1m b/usr/src/man/man1m/pkgadd.1m
index 4669fe5256..2bae037332 100644
--- a/usr/src/man/man1m/pkgadd.1m
+++ b/usr/src/man/man1m/pkgadd.1m
@@ -4,22 +4,22 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH pkgadd 1M "30 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH PKGADD 1M "Oct 30, 2007"
 .SH NAME
 pkgadd \- transfer software packages to the system
 .SH SYNOPSIS
 .LP
 .nf
-\fBpkgadd\fR [\fB-nv\fR] [\fB-a\fR \fIadmin\fR] [\fB-G\fR] [\fB-x\fR \fIproxy\fR] 
-     [ [\fB-M\fR] \fB-R\fR \fIroot_path\fR] [\fB-r\fR \fIresponse\fR] [\fB-k\fR \fIkeystore\fR] 
-     [\fB-P\fR \fIpasswd\fR] [\fB-V\fR \fIfs_file\fR] 
-     [\fB-d\fR \fIdevice\fR | \fB-d\fR \fIdatastream\fR \fIpkginst\fR | all] 
+\fBpkgadd\fR [\fB-nv\fR] [\fB-a\fR \fIadmin\fR] [\fB-G\fR] [\fB-x\fR \fIproxy\fR]
+     [ [\fB-M\fR] \fB-R\fR \fIroot_path\fR] [\fB-r\fR \fIresponse\fR] [\fB-k\fR \fIkeystore\fR]
+     [\fB-P\fR \fIpasswd\fR] [\fB-V\fR \fIfs_file\fR]
+     [\fB-d\fR \fIdevice\fR | \fB-d\fR \fIdatastream\fR \fIpkginst\fR | all]
      [\fIpkginst\fR | \fB-Y\fR \fIcategory\fR [\fI, category\fR]...]
 .fi
 
 .LP
 .nf
-\fBpkgadd\fR \fB-s\fR [\fB-d\fR \fIdevice\fR | \fB-d\fR \fIdatastream\fR \fIpkginst\fR | all] 
+\fBpkgadd\fR \fB-s\fR [\fB-d\fR \fIdevice\fR | \fB-d\fR \fIdatastream\fR \fIpkginst\fR | all]
      [\fIpkginst\fR | \fB-Y\fR \fIcategory\fR [\fI, category\fR]...]
 .fi
 
@@ -89,7 +89,6 @@ The supported options are described as follows. The \fB-d\fR \fIdevice\fR
 source specifier is described under OPERANDS, below.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-a\fR \fIadmin\fR\fR
 .ad
@@ -106,7 +105,6 @@ current working directory, \fBpkgadd\fR looks in the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-G\fR\fR
 .ad
@@ -123,7 +121,6 @@ for a package, \fBSUNW_PKG_ALLZONES\fR is set to true. See \fBpkginfo\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR \fIkeystore\fR\fR
 .ad
@@ -137,7 +134,6 @@ valid trusted certificates. See \fBKEYSTORE LOCATIONS\fR for more information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR\fR
 .ad
@@ -151,7 +147,6 @@ and earlier releases.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -163,7 +158,6 @@ installed files. The default mode is interactive.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIpasswd\fR\fR
 .ad
@@ -176,7 +170,6 @@ option's argument.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-r\fR \fIresponse\fR\fR
 .ad
@@ -190,7 +183,6 @@ full pathname.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot_path\fR\fR
 .ad
@@ -214,7 +206,6 @@ zone's file system. See \fBzones\fR(5).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-s\fR \fIspool\fR\fR
 .ad
@@ -225,7 +216,6 @@ Write the package into the directory \fIspool\fR instead of installing it.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -238,7 +228,6 @@ procedural and non-procedural scripts.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR \fIfs_file\fR\fR
 .ad
@@ -251,7 +240,6 @@ file is non-existent or unreliable.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fIproxy\fR\fR
 .ad
@@ -280,7 +268,6 @@ for instances of a package to install or spool. Optionally, the source for the
 package instances to be installed or spooled can be specified using:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdevice\fR\fR
 .ad
@@ -333,7 +320,6 @@ the source are to be installed. As an alternative, the package instances to be
 installed can be specified using:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpkginst\fR\fR
 .ad
@@ -350,7 +336,6 @@ quotes (\fB\&'\fR) or preceded by a backslash (\fB\e\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Y\fR \fIcategory\fR[,\fIcategory\fR...]\fR
 .ad
@@ -449,7 +434,6 @@ then the user is prompted to enter one: this will typically be read from the
 current terminal with echoing turned off.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpass:\fIpassword\fR\fR\fR
 .ad
@@ -462,7 +446,6 @@ important.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBenv:\fIvar\fR\fR\fR
 .ad
@@ -475,7 +458,6 @@ should be used with caution.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfile:\fIpathname\fR\fR\fR
 .ad
@@ -489,7 +471,6 @@ named pipe. For example, to read the password from standard input, use
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconsole\fR\fR
 .ad
@@ -525,7 +506,7 @@ datastream must have been created with the \fBpkgtrans\fR(1) command.
 .sp
 .in +2
 .nf
-example# \fBpkgadd -d /var/tmp/datastream all\fR 
+example# \fBpkgadd -d /var/tmp/datastream all\fR
 .fi
 .in -2
 .sp
@@ -538,7 +519,6 @@ designated datastream will be installed.
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -549,7 +529,6 @@ Successful completion
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
@@ -560,7 +539,6 @@ Fatal error.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
@@ -571,7 +549,6 @@ Warning.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
@@ -582,7 +559,6 @@ Interruption.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR\fR
 .ad
@@ -593,7 +569,6 @@ Administration.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB5\fR\fR
 .ad
@@ -604,7 +579,6 @@ Administration. Interaction is required. Do not use \fBpkgadd\fR \fB-n\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB10\fR\fR
 .ad
@@ -615,7 +589,6 @@ Reboot after installation of all packages.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB20\fR\fR
 .ad
@@ -627,7 +600,6 @@ Reboot after installation of this package.
 .SH ENVIRONMENT VARIABLES
 .sp
 .ne 2
-.mk
 .na
 \fB\fBHTTPPROXY\fR\fR
 .ad
@@ -639,7 +611,6 @@ Specifies an HTTP proxy host. Overrides administration file setting, and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBHTTPPROXYPORT\fR\fR
 .ad
@@ -651,7 +622,6 @@ Specifies the port to use when contacting the host specified by
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhttp_proxy\fR\fR
 .ad
@@ -664,7 +634,6 @@ setting.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/sadm/install/logs/\fR\fR
 .ad
@@ -681,13 +650,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/pkgadm.1m b/usr/src/man/man1m/pkgadm.1m
index cd948ba311..9f7a3d020d 100644
--- a/usr/src/man/man1m/pkgadm.1m
+++ b/usr/src/man/man1m/pkgadm.1m
@@ -3,26 +3,26 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH pkgadm 1M "20 Mar 2009" "SunOS 5.11" "System Administration Commands"
+.TH PKGADM 1M "Mar 20, 2009"
 .SH NAME
 pkgadm \- manage packaging and patching system
 .SH SYNOPSIS
 .LP
 .nf
-\fBpkgadm addcert\fR [\fB-ty\fR] [\fB-a\fR \fIapp\fR] [\fB-k\fR \fIkeystore\fR] [\fB-e\fR \fIkeyfile\fR] 
-     [\fB-f\fR \fIformat\fR] [\fB-n\fR \fIname\fR] [\fB-P\fR \fIpassarg\fR] 
+\fBpkgadm addcert\fR [\fB-ty\fR] [\fB-a\fR \fIapp\fR] [\fB-k\fR \fIkeystore\fR] [\fB-e\fR \fIkeyfile\fR]
+     [\fB-f\fR \fIformat\fR] [\fB-n\fR \fIname\fR] [\fB-P\fR \fIpassarg\fR]
      [\fB-p\fR \fIimport_passarg\fR] [\fB-R\fR \fIrootpath\fR] certfile
 .fi
 
 .LP
 .nf
-\fBpkgadm removecert\fR [\fB-a\fR \fIapp\fR] [\fB-k\fR \fIkeystore\fR] \fB-n\fR \fIname\fR 
+\fBpkgadm removecert\fR [\fB-a\fR \fIapp\fR] [\fB-k\fR \fIkeystore\fR] \fB-n\fR \fIname\fR
      [\fB-P\fR \fIpassarg\fR] [\fB-R\fR \fIrootpath\fR]
 .fi
 
 .LP
 .nf
-\fBpkgadm listcert\fR [\fB-a\fR \fIapp\fR] [\fB-f\fR \fIformat\fR] [\fB-k\fR \fIkeystore\fR] \fB-n\fR \fIname\fR 
+\fBpkgadm listcert\fR [\fB-a\fR \fIapp\fR] [\fB-f\fR \fIformat\fR] [\fB-k\fR \fIkeystore\fR] \fB-n\fR \fIname\fR
      [\fB-P\fR \fIpassarg\fR] [\fB-o\fR \fIoutfile\fR] [\fB-R\fR \fIrootpath\fR]
 .fi
 
@@ -62,7 +62,6 @@ certificates and keys used.
 keystore database:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaddcert\fR\fR
 .ad
@@ -77,7 +76,6 @@ certificate chains during certificate verification.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremovecert\fR\fR
 .ad
@@ -90,7 +88,6 @@ used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlistcert\fR\fR
 .ad
@@ -101,7 +98,6 @@ Print details of one or more certificates in the keystore.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsync\fR\fR
 .ad
@@ -130,7 +126,6 @@ implementations.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIapp\fR\fR
 .ad
@@ -142,7 +137,6 @@ with a particular application. Otherwise, the global keystore is affected.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIkeyfile\fR\fR
 .ad
@@ -155,7 +149,6 @@ the private key must be in the same file as the certificate being added.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIformat\fR\fR
 .ad
@@ -165,7 +158,6 @@ When adding certificates, this specifies the format to expect certificates and
 private keys in. Possible values when adding are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpem\fR\fR
 .ad
@@ -176,7 +168,6 @@ Certificate and any private key uses PEM encoding.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBder\fR\fR
 .ad
@@ -189,7 +180,6 @@ When printing certificates, this specifies the output format used when
 printing. Acceptable values for format are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpem\fR\fR
 .ad
@@ -200,7 +190,6 @@ Output each certificate using PEM encoding.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBder\fR\fR
 .ad
@@ -211,7 +200,6 @@ Output each certificate using DER encoding.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtext\fR\fR
 .ad
@@ -224,7 +212,6 @@ Output each certificate in human-readable format.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR \fIkeystore\fR\fR
 .ad
@@ -235,7 +222,6 @@ Overrides the default location used when accessing the keystore.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fIname\fR\fR
 .ad
@@ -250,7 +236,6 @@ supplied, then all keystore entities are printed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIoutfile\fR\fR
 .ad
@@ -262,7 +247,6 @@ Output the result of the command to \fIoutfile\fR. Only used when examining
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIpassarg\fR\fR
 .ad
@@ -276,7 +260,6 @@ default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIimport_passarg\fR\fR
 .ad
@@ -289,7 +272,6 @@ password used to decrypt the certificate and/or private key being added.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
@@ -300,7 +282,6 @@ password used to decrypt the certificate and/or private key being added.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIrootpath\fR\fR
 .ad
@@ -326,7 +307,6 @@ zone's file system. See \fBzones\fR(5).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
@@ -343,7 +323,6 @@ verifying future untrusted certificates.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
@@ -354,7 +333,6 @@ Print version associated with packaging tools.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-y\fR\fR
 .ad
@@ -368,7 +346,6 @@ additional verification step is skipped.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-?\fR\fR
 .ad
@@ -383,7 +360,6 @@ Print help message.
 The following operand is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcertfile\fR\fR
 .ad
@@ -461,7 +437,6 @@ example% pkgadm listcert
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -472,7 +447,6 @@ successful completion
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnon-zero\fR\fR
 .ad
@@ -489,13 +463,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/pkgask.1m b/usr/src/man/man1m/pkgask.1m
index 650feec2a8..3a4c3b86a7 100644
--- a/usr/src/man/man1m/pkgask.1m
+++ b/usr/src/man/man1m/pkgask.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH pkgask 1M "6 Apr 2005" "SunOS 5.11" "System Administration Commands"
+.TH PKGASK 1M "Apr 6, 2005"
 .SH NAME
 pkgask \- stores answers to a request script
 .SH SYNOPSIS
@@ -27,12 +27,10 @@ already contains all of the information the package needs.
 The following options are supported
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fI device\fR\fR
 .ad
 .RS 16n
-.rt  
 Run the request script for a package on \fIdevice\fR. \fIdevice\fR can be a
 directory pathname or the identifiers for tape, floppy disk or removable disk
 (for example, \fB/var/tmp\fR, \fB/dev/diskette\fR, and \fB/dev/dsk/c1d0s0\fR).
@@ -41,12 +39,10 @@ The default device is the installation spool directory.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR\fI root_path\fR\fR
 .ad
 .RS 16n
-.rt  
 Define the full path name of a directory to use as the \fIroot_path\fR. All
 files, including package system information files, are relocated to a directory
 tree starting in the specified \fIroot_path\fR.
@@ -63,12 +59,10 @@ zone's file system. See \fBzones\fR(5).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fI response\fR\fR
 .ad
 .RS 16n
-.rt  
 Identify a file or directory which should be created to contain the responses
 to interaction with the package. The name must be a full pathname. The file, or
 directory of files, can later be used as input to the \fBpkgadd\fR(1M) command.
@@ -80,12 +74,10 @@ directory of files, can later be used as input to the \fBpkgadd\fR(1M) command.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpkginst\fR\fR
 .ad
 .RS 11n
-.rt  
 Specify the package instance, or list of instances for which \fBrequest\fR
 scripts will be created. The token \fBall\fR may be used to refer to all
 packages available on the source medium.
@@ -94,23 +86,19 @@ packages available on the source medium.
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
diff --git a/usr/src/man/man1m/pkgchk.1m b/usr/src/man/man1m/pkgchk.1m
index 7d8c62730f..eb0600dc28 100644
--- a/usr/src/man/man1m/pkgchk.1m
+++ b/usr/src/man/man1m/pkgchk.1m
@@ -3,21 +3,21 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH pkgchk 1M "30 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH PKGCHK 1M "Oct 30, 2007"
 .SH NAME
 pkgchk \- check package installation accuracy
 .SH SYNOPSIS
 .LP
 .nf
-\fBpkgchk\fR [\fB-l\fR | \fB-acfnqvx\fR] [\fB-i\fR \fIfile\fR | -] 
-     [\fB-p\fR \fIpath\fR... | \fB-P\fR \fIpartial-path\fR...] [\fB-R\fR \fIroot_path\fR] 
+\fBpkgchk\fR [\fB-l\fR | \fB-acfnqvx\fR] [\fB-i\fR \fIfile\fR | -]
+     [\fB-p\fR \fIpath\fR... | \fB-P\fR \fIpartial-path\fR...] [\fB-R\fR \fIroot_path\fR]
      [ [\fB-m\fR \fIpkgmap\fR [\fB-e\fR \fIenvfile\fR]] | pkginst... | \fB-Y\fR \fIcategory\fR,\fIcategory\fR\&.\|.\|.]
 .fi
 
 .LP
 .nf
-\fBpkgchk\fR \fB-d\fR \fIdevice\fR [\fB-l\fR | \fB-fv\fR] [\fB-i\fR \fIfile\fR | -] [\fB-M\fR] [\fB-p\fR \fIpath\fR]... 
-     [\fB-V\fR \fIfs_file\fR] 
+\fBpkgchk\fR \fB-d\fR \fIdevice\fR [\fB-l\fR | \fB-fv\fR] [\fB-i\fR \fIfile\fR | -] [\fB-M\fR] [\fB-p\fR \fIpath\fR]...
+     [\fB-V\fR \fIfs_file\fR]
      [pkginst... | \fB-Y\fR \fIcategory\fR[,\fIcategory\fR\&.\|.\|.]]
 .fi
 
@@ -45,7 +45,6 @@ attributes cannot be checked for spooled packages.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -57,7 +56,6 @@ check both.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
@@ -69,7 +67,6 @@ check both.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-d\fR \fIdevice\fR\fR
 .ad
@@ -82,7 +79,6 @@ directory path name or the identifiers for tape, floppy disk, or removable disk
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-e\fR \fIenvfile\fR\fR
 .ad
@@ -94,7 +90,6 @@ resolve parameters noted in the specified \fBpkgmap\fR file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -112,7 +107,6 @@ set in the mode.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-i\fR \fIfile\fR | \fB-\fR\fR
 .ad
@@ -126,7 +120,6 @@ not checked.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
@@ -139,7 +132,6 @@ options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fBpkgmap\fR\fR
 .ad
@@ -150,7 +142,6 @@ Check the package against the package map file, \fBpkgmap\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR\fR
 .ad
@@ -164,7 +155,6 @@ and earlier releases.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -176,7 +166,6 @@ post-installation checking.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-p\fR \fIpath\fR\fR
 .ad
@@ -192,7 +181,6 @@ option, described above. See EXAMPLES.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-P\fR \fIpartial-path\fR\fR
 .ad
@@ -208,7 +196,6 @@ about paths that contain commas in the description of \fB-p\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
@@ -219,7 +206,6 @@ Quiet mode. Do not give messages about missing files.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot_path\fR\fR
 .ad
@@ -243,7 +229,6 @@ zone's file system. See \fBzones\fR(5).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -254,7 +239,6 @@ Verbose mode. Files are listed as processed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR \fIfs_file\fR\fR
 .ad
@@ -267,7 +251,6 @@ file is non-existent or unreliable.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
@@ -279,7 +262,6 @@ installation software database or the indicated \fBpkgmap\fR file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Y\fR \fIcategory\fR\fR
 .ad
@@ -292,7 +274,6 @@ installed or spooled package's \fBpkginfo\fR(4) file.
 .SH OPERANDS
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpkginst\fR\fR
 .ad
@@ -309,7 +290,6 @@ quotes (\fB\&'\fR) or preceded by a backslash (\e);
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpartial-path\fR\fR
 .ad
@@ -390,7 +370,7 @@ Expected mode: 0755
 Expected owner: root
 Expected group: bin
 Referenced by the following packages:
-        SUNWcar        
+        SUNWcar
 Current status: installed
 .fi
 .in -2
@@ -399,7 +379,6 @@ Current status: installed
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -410,7 +389,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
diff --git a/usr/src/man/man1m/pkgrm.1m b/usr/src/man/man1m/pkgrm.1m
index f2075f8efb..ae73ea98bf 100644
--- a/usr/src/man/man1m/pkgrm.1m
+++ b/usr/src/man/man1m/pkgrm.1m
@@ -3,20 +3,20 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH pkgrm 1M "30 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH PKGRM 1M "Oct 30, 2007"
 .SH NAME
 pkgrm \- remove a package from the system
 .SH SYNOPSIS
 .LP
 .nf
-\fBpkgrm\fR [\fB-nv\fR] [\fB-a\fR \fIadmin\fR] [ [\fB-A\fR | \fB-M\fR] \fB-R\fR \fIroot_path\fR] 
-     [\fB-V\fR \fIfs_file\fR] 
+\fBpkgrm\fR [\fB-nv\fR] [\fB-a\fR \fIadmin\fR] [ [\fB-A\fR | \fB-M\fR] \fB-R\fR \fIroot_path\fR]
+     [\fB-V\fR \fIfs_file\fR]
      [pkginst... | \fB-Y\fR \fIcategory\fR[,\fIcategory\fR\&.\|.\|.]]
 .fi
 
 .LP
 .nf
-\fBpkgrm\fR \fB-s\fR \fIspool\fR 
+\fBpkgrm\fR \fB-s\fR \fIspool\fR
      [pkginst... | \fB-Y\fR \fIcategory\fR[,\fIcategory\fR\&.\|.\|.]]
 .fi
 
@@ -54,7 +54,6 @@ variable is set.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIadmin\fR\fR
 .ad
@@ -69,7 +68,6 @@ current working directory, \fBpkgrm\fR looks in the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR\fR
 .ad
@@ -82,7 +80,6 @@ from the client's file system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR\fR
 .ad
@@ -96,7 +93,6 @@ and earlier releases.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -113,7 +109,6 @@ used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot_path\fR\fR
 .ad
@@ -135,7 +130,6 @@ zone's file system. See \fBzones\fR(5).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIspool\fR\fR
 .ad
@@ -147,7 +141,6 @@ directory for spooled packages is \fB/var/sadm/pkg\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -160,7 +153,6 @@ procedural and non-procedural scripts.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR \fIfs_file\fR\fR
 .ad
@@ -173,7 +165,6 @@ non-existent or unreliable.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Y\fR \fIcategory\fR\fR
 .ad
@@ -191,7 +182,6 @@ option.
 The following operand is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpkginst\fR\fR
 .ad
@@ -232,7 +222,6 @@ option, above.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -243,7 +232,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
@@ -254,7 +242,6 @@ Fatal error.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
@@ -265,7 +252,6 @@ Warning.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
@@ -276,7 +262,6 @@ Interruption.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR\fR
 .ad
@@ -287,7 +272,6 @@ Administration.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB10\fR\fR
 .ad
@@ -298,7 +282,6 @@ Reboot after removal of all packages.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB20\fR\fR
 .ad
diff --git a/usr/src/man/man1m/plockstat.1m b/usr/src/man/man1m/plockstat.1m
index 18a9d2ec6f..b24f36d67d 100644
--- a/usr/src/man/man1m/plockstat.1m
+++ b/usr/src/man/man1m/plockstat.1m
@@ -3,19 +3,19 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH plockstat 1M "26 Jan 2009" "SunOS 5.11" "System Administration Commands"
+.TH PLOCKSTAT 1M "Jan 26, 2009"
 .SH NAME
 plockstat \- report user-level lock statistics
 .SH SYNOPSIS
 .LP
 .nf
-\fBplockstat\fR [\fB-vACHV\fR] [\fB-n\fR \fIcount\fR] [\fB-s\fR \fIdepth\fR] [\fB-e\fR \fIsecs\fR] 
+\fBplockstat\fR [\fB-vACHV\fR] [\fB-n\fR \fIcount\fR] [\fB-s\fR \fIdepth\fR] [\fB-e\fR \fIsecs\fR]
      [\fB-x\fR \fIarg\fR [=val]] \fIcommand\fR [\fIarg\fR]...
 .fi
 
 .LP
 .nf
-\fBplockstat\fR [\fB-vACHV\fR] [\fB-n\fR \fIcount\fR] [\fB-s\fR \fIdepth\fR] [\fB-e\fR \fIsecs\fR] 
+\fBplockstat\fR [\fB-vACHV\fR] [\fB-n\fR \fIcount\fR] [\fB-s\fR \fIdepth\fR] [\fB-e\fR \fIsecs\fR]
      [\fB-x\fR \fIarg\fR [=val]] \fB-p\fR \fIpid\fR
 .fi
 
@@ -44,100 +44,82 @@ security features.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR\fR
 .ad
 .RS 16n
-.rt  
 Watch all lock events. This option is equivalent to \fB-CH\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR\fR
 .ad
 .RS 16n
-.rt  
 Watch contention events.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-H\fR\fR
 .ad
 .RS 16n
-.rt  
 Watch hold events.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIsecs\fR\fR
 .ad
 .RS 16n
-.rt  
 Exit after the number of seconds specified have elapsed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fIcount\fR\fR
 .ad
 .RS 16n
-.rt  
 Display only the specified number of entries for each output category.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIdepth\fR\fR
 .ad
 .RS 16n
-.rt  
 Record a stack trace rather than just the calling function.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIpid\fR\fR
 .ad
 .RS 16n
-.rt  
 Specify a process ID from which \fBplockstat\fR is to gather data.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 16n
-.rt  
 Print out a message to indicate that tracing has started.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fIarg\fR[=\fIval\fR]\fR
 .ad
 .RS 16n
-.rt  
 Enable or modify a DTrace runtime option or D compiler option. The list of
 options is found in the \fISolaris Dynamic Tracing Guide\fR. Boolean options
 are enabled by specifying their name. Options with values are set by separating
@@ -146,12 +128,10 @@ the option name and value with an equals sign (\fB=\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
 .RS 16n
-.rt  
 Print the Dtrace commands used to gather the data. The output can then be used
 directly with the \fBdtrace\fR(1M) command.
 .RE
@@ -162,56 +142,46 @@ directly with the \fBdtrace\fR(1M) command.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIarg\fR\fR
 .ad
 .RS 11n
-.rt  
 A string to be passed as an argument to \fIcommand\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcommand\fR\fR
 .ad
 .RS 11n
-.rt  
 The name of a utility to be invoked.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcount\fR\fR
 .ad
 .RS 11n
-.rt  
 A positive integer value.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpid\fR\fR
 .ad
 .RS 11n
-.rt  
 A process identifier for a process to be monitored.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsecs\fR\fR
 .ad
 .RS 11n
-.rt  
 Duration specified as a positive integer number of seconds.
 .RE
 
@@ -221,23 +191,19 @@ Duration specified as a positive integer number of seconds.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -249,13 +215,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/pmadm.1m b/usr/src/man/man1m/pmadm.1m
index fea19e8bb0..a961c3050a 100644
--- a/usr/src/man/man1m/pmadm.1m
+++ b/usr/src/man/man1m/pmadm.1m
@@ -3,14 +3,14 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH pmadm 1M "10 Nov 1998" "SunOS 5.11" "System Administration Commands"
+.TH PMADM 1M "Nov 10, 1998"
 .SH NAME
 pmadm \- port monitor administration
 .SH SYNOPSIS
 .LP
 .nf
-\fBpmadm\fR \fB-a\fR [\fB-p\fR \fIpmtag\fR | \fB-t\fR \fItype\fR] \fB-s\fR \fIsvctag\fR \fB-i\fR \fIid\fR \fB-m\fR \fIpmspecific\fR \fB-v\fR \fIver\fR 
-     [\fB-f\fR xu] 
+\fBpmadm\fR \fB-a\fR [\fB-p\fR \fIpmtag\fR | \fB-t\fR \fItype\fR] \fB-s\fR \fIsvctag\fR \fB-i\fR \fIid\fR \fB-m\fR \fIpmspecific\fR \fB-v\fR \fIver\fR
+     [\fB-f\fR xu]
      [\fB-y\fR \fIcomment\fR] [\fB-z\fR \fI script\fR]
 .fi
 
@@ -98,12 +98,10 @@ only by a privileged user.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 17n
-.rt  
 Add a service. \fBpmadm\fR adds an entry for the new service to the port
 monitor's administrative file. Because of the complexity of the options and
 arguments that follow the \fB-a\fR option, it may be convenient to use a
@@ -112,12 +110,10 @@ command script or the menu system to add services.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 17n
-.rt  
 Disable a service. Add \fBx\fR to the flag field in the entry for the service
 \fIsvctag\fR in the port monitor's administrative file. This is the entry used
 by port monitor \fIpmtag\fR. See the \fB-f\fR option, below, for a description
@@ -126,12 +122,10 @@ of the flags available.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
 .RS 17n
-.rt  
 Enable a service. Remove \fBx\fR from the flag field in the entry for the
 service \fIsvctag\fR in the port monitor administrative file. This is the entry
 used by port monitor \fIpmtag\fR. See the \fB-f\fR option, below, for a
@@ -140,12 +134,10 @@ description of the flags available.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fBxu\fR\fR
 .ad
 .RS 17n
-.rt  
 The \fB-f\fR option specifies one or both of the following two flags which are
 then included in the flag field of the entry for the new service in the port
 monitor's administrative file. If the \fB-f\fR option is not included, no flags
@@ -154,24 +146,20 @@ enabled and no \fButmpx\fR entry is created for it. An \fB-f\fR option without
 a following argument is illegal.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBx\fR\fR
 .ad
 .RS 5n
-.rt  
 Do not enable the service \fIsvctag\fR available through port monitor
 \fIpmtag\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBu\fR\fR
 .ad
 .RS 5n
-.rt  
 Create a \fButmpx\fR entry for service \fIsvctag\fR available through port
 monitor \fIpmtag\fR.
 .RE
@@ -180,12 +168,10 @@ monitor \fIpmtag\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR\fR
 .ad
 .RS 17n
-.rt  
 Print, install, or replace a per-service configuration script. The \fB-g\fR
 option with a \fB-p\fR option and a \fB-s\fR option prints the per-service
 configuration script for service \fIsvctag\fR available through port monitor
@@ -201,90 +187,74 @@ combinations of options with \fB-g\fR are invalid.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fI id\fR\fR
 .ad
 .RS 17n
-.rt  
 \fBid\fR is the identity that is to be assigned to service \fIsvctag\fR when it
 is started. \fBid\fR must be an entry in \fB/etc/passwd\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 17n
-.rt  
 The \fB-l\fR option requests service information. Used by itself and with the
 options described below, it provides a filter for extracting information in
 several different groupings.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 23n
-.rt  
 By itself, the \fB-l\fR option lists all services on the system.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-l\fR\fB \fR\fB-p\fR\fB \fR\fIpmtag\fR\fR
 .ad
 .RS 23n
-.rt  
 Lists all services available through port monitor \fIpmtag\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-l\fR\fB \fR\fB-s\fR\fB \fR\fIsvctag\fR\fR
 .ad
 .RS 23n
-.rt  
 Lists all services with tag \fIsvctag\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-l\fR\fB \fR\fB-p\fR\fB \fR\fIpmtag\fR\fB-s\fR\fIsvctag\fR\fR
 .ad
 .RS 23n
-.rt  
 Lists service \fIsvctag\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-l\fR\fB \fR\fB-t\fR\fB \fR\fItype\fR\fR
 .ad
 .RS 23n
-.rt  
 Lists all services available through port monitors of type \fBtype\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-l\fR\fB \fR\fB-t\fR\fB \fR\fItype\fR\fB-s\fR\fIsvctag\fR\fR
 .ad
 .RS 23n
-.rt  
 Lists all services with tag \fIsvctag\fR available through a port monitor of
 type \fBtype\fR.
 .RE
@@ -294,60 +264,50 @@ Other combinations of options with \fB-l\fR are invalid.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR\fR
 .ad
 .RS 17n
-.rt  
 The \fB-L\fR option is identical to the \fB-l\fR option except that output is
 printed in a condensed format.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fI pmspecific\fR\fR
 .ad
 .RS 17n
-.rt  
 \fIpmspecific\fR is the port monitor-specific portion of the port monitor
 administrative file entry for the service.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fI pmtag\fR\fR
 .ad
 .RS 17n
-.rt  
 Specifies the tag associated with the port monitor through which a service
 (specified as \fB\fR\fB-s\fR\fB \fR\fIsvctag\fR) is available.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 17n
-.rt  
 Remove a service. When \fBpmadm\fR removes a service, the entry for the service
 is removed from the port monitor's administrative file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fI svctag\fR\fR
 .ad
 .RS 17n
-.rt  
 Specifies the service tag associated with a given service. The service tag is
 assigned by the system administrator and is part of the entry for the service
 in the port monitor's administrative file.
@@ -355,23 +315,19 @@ in the port monitor's administrative file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fI type\fR\fR
 .ad
 .RS 17n
-.rt  
 Specifies the port monitor type.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fI ver\fR\fR
 .ad
 .RS 17n
-.rt  
 Specifies the version number of the port monitor administrative file. The
 version number may be given as
 .sp
@@ -391,24 +347,20 @@ option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-y\fR\fI comment\fR\fR
 .ad
 .RS 17n
-.rt  
 Associate \fIcomment\fR with the service entry in the port monitor
 administrative file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-z\fR\fI script\fR\fR
 .ad
 .RS 17n
-.rt  
 Used with the \fB-g\fR option to specify the name of the file that contains the
 per-service configuration script. Modifying a configuration script is a
 three-step procedure. First a copy of the existing script is made (\fB-g\fR
@@ -584,57 +536,47 @@ pmadm -g -p pmtag -s svctag
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful operation.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 Operation failed.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/saf/\fR\fIpmtag\fR\fB/_config\fR\fR
 .ad
 .RS 26n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/saf/\fR\fIpmtag\fR\fB/\fR\fIsvctag\fR\fR
 .ad
 .RS 26n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/saf/\fR\fIpmtag\fR\fB/*\fR\fR
 .ad
 .RS 26n
-.rt  
 
 .RE
 
diff --git a/usr/src/man/man1m/pmconfig.1m b/usr/src/man/man1m/pmconfig.1m
index 352e395339..2bf343db50 100644
--- a/usr/src/man/man1m/pmconfig.1m
+++ b/usr/src/man/man1m/pmconfig.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH pmconfig 1M "12 Aug 2004" "SunOS 5.11" "System Administration Commands"
+.TH PMCONFIG 1M "Aug 12, 2004"
 .SH NAME
 pmconfig \- Configure the Power Management system
 .SH SYNOPSIS
@@ -44,12 +44,10 @@ configuration is \fBdtpower\fR(1M).
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 6n
-.rt  
  Reset  Power Management and suspend-resume  state to default and exit. User
 must have both  Power Management and suspend-resume  configuration permission
 for this option.
@@ -61,46 +59,38 @@ for this option.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Upon successful completion
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/power.conf\fR\fR
 .ad
 .RS 22n
-.rt  
 System  Power Management configuration file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/power\fR\fR
 .ad
 .RS 22n
-.rt  
 File that controls permissions for system's  Power Management and
 suspend-resume  features. The \fBPMCHANGEPERM\fR keyboard controls the Power
 Management configuration permissions, while the \fBCPRCHANGEPERM \fRkeyword
@@ -112,34 +102,28 @@ controls the  suspend-resume  configuration permissions.
 Allowed values are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBall\fR\fR
 .ad
 .RS 22n
-.rt  
 Any user can change the configuration.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-\fR\fR
 .ad
 .RS 22n
-.rt  
 No one except super-user can change the configuration.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB<user1, user2,...>\fR\fR
 .ad
 .RS 22n
-.rt  
 A  user in this user list or a super-user can change the configuration. The
 user list is a space and/or comma (,) separated list. You must enclose the list
 in < and > characters.
@@ -147,12 +131,10 @@ in < and > characters.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconsole-owner\fR\fR
 .ad
 .RS 22n
-.rt  
 A  user who owns the system console device node or a super-user can change the
 configuration.
 .RE
@@ -169,13 +151,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface stability Unstable 
+Interface stability 	Unstable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/pntadm.1m b/usr/src/man/man1m/pntadm.1m
index 1cc390661e..f50b753dd8 100644
--- a/usr/src/man/man1m/pntadm.1m
+++ b/usr/src/man/man1m/pntadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH pntadm 1M "9 Jan 2004" "SunOS 5.11" "System Administration Commands"
+.TH PNTADM 1M "Jan 9, 2004"
 .SH NAME
 pntadm \- DHCP network table management utility
 .SH SYNOPSIS
@@ -14,30 +14,30 @@ pntadm \- DHCP network table management utility
 
 .LP
 .nf
-\fBpntadm\fR \fB-A\fR \fIname_IP_address\fR [\fB-c\fR \fIcomment\fR] [\fB-e\fR \fImm/dd/yyyy\fR] 
-     [\fB-f\fR \fInum\fR | \fIkeywords\fR] [\fB-h\fR \fIclient_hostname\fR] 
-     [\fB-i\fR [\fB-a\fR] \fIclient_ID\fR] [\fB-m\fR [\fB-y\fR] \fImacro\fR] [\fB-s\fR \fIserver\fR] 
+\fBpntadm\fR \fB-A\fR \fIname_IP_address\fR [\fB-c\fR \fIcomment\fR] [\fB-e\fR \fImm/dd/yyyy\fR]
+     [\fB-f\fR \fInum\fR | \fIkeywords\fR] [\fB-h\fR \fIclient_hostname\fR]
+     [\fB-i\fR [\fB-a\fR] \fIclient_ID\fR] [\fB-m\fR [\fB-y\fR] \fImacro\fR] [\fB-s\fR \fIserver\fR]
      [\fB-r\fR \fIresource\fR] [\fB-p\fR \fIpath\fR] [\fB-u\fR \fIuninterpreted\fR] \fInetwork\fR
 .fi
 
 .LP
 .nf
-\fBpntadm\fR \fB-M\fR \fIname_IP_address\fR [\fB-c\fR \fIcomment\fR] [\fB-e\fR \fImm/dd/yyyy\fR] 
-     [\fB-f\fR \fInum\fR | \fIkeywords\fR] [\fB-h\fR \fIclient_hostname\fR] 
-     [\fB-i\fR [\fB-a\fR] \fIclient\fR \fI ID\fR] [\fB-m\fR [\fB-y\fR] \fImacro\fR] 
-     [\fB-n\fR \fInew_client_IP_address\fR] [\fB-s\fR \fIserver\fR] [\fB-r\fR \fIresource\fR] 
+\fBpntadm\fR \fB-M\fR \fIname_IP_address\fR [\fB-c\fR \fIcomment\fR] [\fB-e\fR \fImm/dd/yyyy\fR]
+     [\fB-f\fR \fInum\fR | \fIkeywords\fR] [\fB-h\fR \fIclient_hostname\fR]
+     [\fB-i\fR [\fB-a\fR] \fIclient\fR \fI ID\fR] [\fB-m\fR [\fB-y\fR] \fImacro\fR]
+     [\fB-n\fR \fInew_client_IP_address\fR] [\fB-s\fR \fIserver\fR] [\fB-r\fR \fIresource\fR]
      [\fB-p\fR \fIpath\fR] [\fB-u\fR uninterpreted] \fInetwork\fR
 .fi
 
 .LP
 .nf
-\fBpntadm\fR \fB-D\fR \fIname_IP_address\fR [\fB-y\fR] [\fB-r\fR \fIresource\fR] [\fB-p\fR \fIpath\fR] 
+\fBpntadm\fR \fB-D\fR \fIname_IP_address\fR [\fB-y\fR] [\fB-r\fR \fIresource\fR] [\fB-p\fR \fIpath\fR]
      [\fB-u\fR uninterpreted] \fInetwork\fR
 .fi
 
 .LP
 .nf
-\fBpntadm\fR \fB-P\fR [\fB-v\fR] [\fB-x\fR] [\fB-r\fR \fIresource\fR] [\fB-p\fR \fIpath\fR] 
+\fBpntadm\fR \fB-P\fR [\fB-v\fR] [\fB-x\fR] [\fB-r\fR \fIresource\fR] [\fB-p\fR \fIpath\fR]
      [\fB-u\fR uninterpreted] \fInetwork\fR
 .fi
 
@@ -83,46 +83,38 @@ One of the following options (function flags) must be specified with the
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR\fI name_IP_address\fR\fR
 .ad
 .RS 26n
-.rt  
 Add a client entry with hostname or client IP address, \fIname_IP_address\fR,
 to the named \fBDHCP\fR network table.
 .sp
 The following sub-options are optional:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcomment\fR\fR
 .ad
 .RS 22n
-.rt  
 Comment text. The default is \fINULL\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fImm/dd/yyyy\fR\fR
 .ad
 .RS 22n
-.rt  
 Absolute lease. The default is \fB0\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fInum\fR | \fIkeywords\fR\fR
 .ad
 .RS 22n
-.rt  
 Flag value. The default is \fB00\fR.
 .sp
 The flag (\fB-f\fR) option can be specified either as a single number denoting
@@ -130,56 +122,46 @@ the intended flag value, or as a series of the following keywords, combined
 using the plus (\fB+\fR) symbol:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDYNAMIC\fR or \fB00\fR\fR
 .ad
 .RS 19n
-.rt  
 Server manager's assignment.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPERMANENT\fR or \fB01\fR\fR
 .ad
 .RS 19n
-.rt  
 Lease on entry is permanent.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMANUAL\fR or \fB02\fR\fR
 .ad
 .RS 19n
-.rt  
 Administrator managed assignment.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBUNUSABLE\fR or \fB04\fR\fR
 .ad
 .RS 19n
-.rt  
 Entry is not valid.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBBOOTP\fR or \fB08\fR\fR
 .ad
 .RS 19n
-.rt  
 Entry reserved for \fBBOOTP\fR clients.
 .RE
 
@@ -188,12 +170,10 @@ For a more detailed description of the flag values, see \fBdhcp_network\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIclient_hostname\fR\fR
 .ad
 .RS 22n
-.rt  
 Client hostname. The default is NULL.
 .sp
 When the \fB-h\fR option is used in this mode, the \fIclient_hostname\fR is
@@ -204,12 +184,10 @@ already present in the hosts table.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIclient_ID\fR [\fB-a\fR]\fR
 .ad
 .RS 22n
-.rt  
 Client identifier [\fB-a\fR]. The default is \fB00\fR.
 .sp
 The \fB-i\fR option modified with \fB-a\fR specifies that the client identifier
@@ -219,12 +197,10 @@ before insertion into the table.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fImacro\fR [\fB-y\fR]\fR
 .ad
 .RS 22n
-.rt  
 Macro name. Default is UNKNOWN.
 .sp
 The \fB-m\fR option modified with \fB-y\fR verifies the existence of the named
@@ -233,12 +209,10 @@ macro in the \fBdhcptab\fR table before adding the entry.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIserver\fR\fR
 .ad
 .RS 22n
-.rt  
 Server IP or name. Default is system name (\fBuname\fR \fB-n\fR).
 .RE
 
@@ -246,12 +220,10 @@ Server IP or name. Default is system name (\fBuname\fR \fB-n\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-B\fR\fR
 .ad
 .RS 26n
-.rt  
 Activate batch mode. \fBpntadm\fR will read from the specified file or from
 standard input a series of \fBpntadm\fR commands and execute them within the
 same process. Processing many \fBpntadm\fR commands using this method is much
@@ -261,12 +233,10 @@ for using \fBpntadm\fR in scripts.
 The following sub-option is optional:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 Display commands to standard output as they are processed.
 .RE
 
@@ -274,24 +244,20 @@ Display commands to standard output as they are processed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR\fR
 .ad
 .RS 26n
-.rt  
 Create the \fBDHCP\fR network table for the network specified by \fInetwork\fR.
 See . For details, see \fBdhcp_network\fR(4) and \fBnetworks\fR(4).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR \fI name_IP_address\fR\fR
 .ad
 .RS 26n
-.rt  
 Delete the specified client entry with hostname or client IP address,
 \fIname_IP_address\fR, in the named \fBDHCP\fR network table. (See
 \fBdhcp_network\fR(4).)
@@ -299,12 +265,10 @@ Delete the specified client entry with hostname or client IP address,
 The following sub-option is optional:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-y\fR\fR
 .ad
 .RS 6n
-.rt  
 Remove associated host table entry. The \fB-y\fR option requests that all
 hostnames associated with the \fBIP\fR address in the hosts table in the
 resource be removed.
@@ -314,12 +278,10 @@ resource be removed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR\fR
 .ad
 .RS 26n
-.rt  
 List the \fBDHCP\fR network tables presently configured, one per line, on
 standard output. If none are found, no output is printed and an exit status of
 \fB0\fR is returned.
@@ -327,12 +289,10 @@ standard output. If none are found, no output is printed and an exit status of
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR \fI name_IP_address\fR\fR
 .ad
 .RS 26n
-.rt  
 Modify the specified client entry with hostname or client IP address,
 \fIname_IP_address\fR, in the named \fBDHCP\fR network table. See
 \fBdhcp_network\fR(4). The default for the sub-options is what they currently
@@ -341,47 +301,39 @@ are set to.
 The following sub-options are optional.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcomment\fR\fR
 .ad
 .RS 29n
-.rt  
 New comment text.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fImm/dd/yy\fR\fR
 .ad
 .RS 29n
-.rt  
 New absolute lease expiration date. Time defaults to 12:00 AM of the day
 specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fInum\fR | \fIkeyboard\fR\fR
 .ad
 .RS 29n
-.rt  
 New flag value, see explanation following the description of the \fB-A\fR
 option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIhost_name\fR\fR
 .ad
 .RS 29n
-.rt  
 New client hostname.
 .sp
 The \fB-h\fR option allows you to change the current \fIhostname\fR associated
@@ -391,45 +343,37 @@ an entry associated with this \fBIP\fR address does not exist.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIclient_ID\fR\fR
 .ad
 .RS 29n
-.rt  
 New client identifier [\fB-a\fR].
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fImacro\fR [\fB-y\fR]\fR
 .ad
 .RS 29n
-.rt  
 Macro name defined in \fBdhcptab\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n \fR \fInew_client_IP_address\fR\fR
 .ad
 .RS 29n
-.rt  
 New \fBIP\fR address.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIserver\fR\fR
 .ad
 .RS 29n
-.rt  
 New server \fBIP\fR or name.
 .RE
 
@@ -439,35 +383,29 @@ New server \fBIP\fR or name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR\fR
 .ad
 .RS 26n
-.rt  
 Display the named \fBDHCP\fR network table.
 .sp
 The following sub-options are optional:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 Display lease time in full verbose format and resolve IP addresses for the
 clients and server to hostnames.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
 .RS 6n
-.rt  
 Display lease time in raw format.
 .RE
 
@@ -476,16 +414,14 @@ These flag codes are used with the \fB-P\fR sub-options:
 
 .sp
 .TS
-tab();
-lw(1.83i) lw(1.83i) lw(1.83i) 
-lw(1.83i) lw(1.83i) lw(1.83i) 
-.
-\fB-v\fR\fB-x\fRDescription
-D00DYNAMIC
-P01PERMANENT
-M02MANUAL
-U04UNUSABLE
-B08BOOTP
+l l l
+l l l .
+\fB-v\fR	\fB-x\fR	Description
+D	00	DYNAMIC
+P	01	PERMANENT
+M	02	MANUAL
+U	04	UNUSABLE
+B	08	BOOTP
 .TE
 
 See \fBdhcp_network\fR(4) for information on these sub-options and associated
@@ -494,35 +430,29 @@ flag codes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fI path\fR\fR
 .ad
 .RS 26n
-.rt  
 Override the \fBdhcpsvc.conf\fR(4) configuration value for data store resource
 path, \fIpath\fR See \fBdhcpsvc.conf\fR(4)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR\fR
 .ad
 .RS 26n
-.rt  
 Remove the named DHCP network table. See \fBdhcp_network\fR(4).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIdata_store_resource\fR\fR
 .ad
 .RS 26n
-.rt  
 Override the \fB/etc/inet/dhcpsvc.conf\fR configuration value for
 \fBRESOURCE=\fR with the \fIdata_store_resource\fR specified. See the
 \fBdhcpsvc.conf\fR(4) man page for more details on resource type, and the
@@ -531,12 +461,10 @@ Override the \fB/etc/inet/dhcpsvc.conf\fR configuration value for
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR uninterpreted\fR
 .ad
 .RS 26n
-.rt  
 Data which will be ignored by \fBpntadm\fR, but passed to the currently
 configured public module to be interpreted by the data store. This might be
 used for a database account name or other authentication or authorization
@@ -549,12 +477,10 @@ parameters required by a particular data store.
 The following operand is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fInetwork\fR\fR
 .ad
 .RS 11n
-.rt  
 The network address or network name which corresponds to the \fBdhcp network\fR
 table. See \fBdhcp_network\fR(4).
 .RE
@@ -702,80 +628,66 @@ example# \fBpntadm -B addclients\fR
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Object already exists.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Object does not exist.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 5n
-.rt  
 Non-critical error.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR\fR
 .ad
 .RS 5n
-.rt  
 Critical error.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/dhcpsvc.conf\fR\fR
 .ad
 .RS 26n
-.rt  
- 
+
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/hosts\fR\fR
 .ad
 .RS 26n
-.rt  
- 
+
 .RE
 
 .SH ATTRIBUTES
@@ -786,13 +698,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/polkit-is-privileged.1m b/usr/src/man/man1m/polkit-is-privileged.1m
index f35cf62e85..f521bdf9d8 100644
--- a/usr/src/man/man1m/polkit-is-privileged.1m
+++ b/usr/src/man/man1m/polkit-is-privileged.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH polkit-is-privileged 1M "22 Aug 2006" "SunOS 5.11" "System Administration Commands"
+.TH POLKIT-IS-PRIVILEGED 1M "Aug 22, 2006"
 .SH NAME
 polkit-is-privileged \- check PolicyKit privileges
 .SH SYNOPSIS
@@ -28,7 +28,6 @@ Currently, the only consumer of PolicyKit is \fBhald\fR(1M).
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR, \fB--help\fR\fR
 .ad
@@ -39,7 +38,6 @@ Display list of options and exit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIprivilege\fR, \fB--privilege\fR \fIprivilege\fR\fR
 .ad
@@ -50,7 +48,6 @@ Name of privilege associated with user. Command tests for this privilege.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIresource\fR, \fB--resource\fR \fIresource\fR\fR
 .ad
@@ -62,7 +59,6 @@ resource.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIuser\fR, \fB--user\fR \fIuser\fR\fR
 .ad
@@ -73,7 +69,6 @@ User name or user id that is tested for.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR, \fB--verbose\fR\fR
 .ad
@@ -84,7 +79,6 @@ Verbose mode.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR, \fB--version\fR\fR
 .ad
@@ -101,13 +95,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityVolatile
+Interface Stability	Volatile
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/pooladm.1m b/usr/src/man/man1m/pooladm.1m
index 57e30d985c..56b0745329 100644
--- a/usr/src/man/man1m/pooladm.1m
+++ b/usr/src/man/man1m/pooladm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH pooladm 1M "1 Dec 2005" "SunOS 5.11" "System Administration Commands"
+.TH POOLADM 1M "Dec 1, 2005"
 .SH NAME
 pooladm \- activate and deactivate the resource pools facility
 .SH SYNOPSIS
@@ -37,46 +37,38 @@ configuration.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 6n
-.rt  
 Instantiate the configuration at the given location. If a filename is not
 specified, it defaults to \fB/etc/pooladm.conf\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 6n
-.rt  
 Disable the pools facility so that pools can no longer be manipulated.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
 .RS 6n
-.rt  
 Enable the pools facility so that pools can be manipulated.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 6n
-.rt  
 Validate the configuration without actually updating the current active
 configuration. Checks that there are no syntactic errors and that the
 configuration can be instantiated on the current system. No validation of
@@ -85,12 +77,10 @@ application specific properties is performed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 6n
-.rt  
 Update the specified location with the details of the current dynamic
 configuration.
 .sp
@@ -101,12 +91,10 @@ configuration is updated before the static location.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
 .RS 6n
-.rt  
 Remove the currently active pool configuration. Destroy all defined resources,
 and return all formerly partitioned components to their default resources.
 .RE
@@ -117,12 +105,10 @@ and return all formerly partitioned components to their default resources.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfilename\fR\fR
 .ad
 .RS 12n
-.rt  
 Use the configuration contained within this file.
 .RE
 
@@ -219,12 +205,10 @@ example# \fB/usr/sbin/pooladm -s /tmp/state.backup\fR
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/pooladm.conf\fR\fR
 .ad
 .RS 21n
-.rt  
 Configuration file for \fBpooladm\fR.
 .RE
 
@@ -236,13 +220,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/poolbind.1m b/usr/src/man/man1m/poolbind.1m
index bc5d227f56..806f65c131 100644
--- a/usr/src/man/man1m/poolbind.1m
+++ b/usr/src/man/man1m/poolbind.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH poolbind 1M "9 Feb 2005" "SunOS 5.11" "System Administration Commands"
+.TH POOLBIND 1M "Feb 9, 2005"
 .SH NAME
 poolbind \- bind processes, tasks, or projects or query binding of processes to
 resource pools
@@ -42,59 +42,49 @@ process is bound to.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIcommand\fR [\fIarguments\fR...]\fR
 .ad
 .RS 29n
-.rt  
 Executes \fIcommand\fR, bound to the pool you specify with \fB-p\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIidtype\fR\fR
 .ad
 .RS 29n
-.rt  
 This option, together with the \fIidlist\fR arguments, specifies one or more
 processes to which the poolbind command is to apply. The interpretation of
 \fIidlist\fR depends on the value of \fIidtype\fR. The valid \fIidtype\fR
 arguments and corresponding interpretations of \fIidlist\fR are as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpid\fR\fR
 .ad
 .RS 10n
-.rt  
 \fIidlist\fR is a list of process \fBID\fRs. Binds the specified processes to
 the specified pool. This is the default behavior if no idtype is specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fItaskid\fR\fR
 .ad
 .RS 10n
-.rt  
 \fIidlist\fR is a list of task IDs. Bind all processes within the list of task
 IDs to the specified pool.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIprojid\fR\fR
 .ad
 .RS 10n
-.rt  
 \fIidlist\fR is a list of project \fBID\fRs. Bind all processes within the list
 of projects to the specified pool. Each project \fBID\fR can be specified as
 either a project name or a numerical project \fBID\fR. See \fBproject\fR(4).
@@ -102,12 +92,10 @@ either a project name or a numerical project \fBID\fR. See \fBproject\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIzoneid\fR\fR
 .ad
 .RS 10n
-.rt  
 \fIidlist\fR is a list of zone \fBID\fRs. Bind all processes within the list of
 zones to the specified pool. Each zone \fBID\fR can be specified as either a
 zone name or a numerical zone \fBID\fR. See \fBzones\fR(5).
@@ -117,24 +105,20 @@ zone name or a numerical zone \fBID\fR. See \fBzones\fR(5).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIpoolname\fR\fR
 .ad
 .RS 29n
-.rt  
 Specifies the name of a pool to which the specified zone, project, tasks, or
 processes are to be bound.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR \fIpid\fR ...\fR
 .ad
 .RS 29n
-.rt  
 Queries the pool bindings for a given list of process \fBID\fRs. If the
 collection of resources associated with the process does not correspond to any
 currently existing pool, or if there are multiple pools with the set of
@@ -144,12 +128,10 @@ process \fBID\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Q\fR \fIpid\fR ...\fR
 .ad
 .RS 29n
-.rt  
  Queries the resource bindings for a given list of process IDs. The resource
 bindings are each reported on a separate line.
 .RE
@@ -220,34 +202,28 @@ example# /usr/sbin/poolbind \fB-Q\fR $$
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Requested operation could not be completed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Invalid command line options were specified.
 .RE
 
@@ -259,13 +235,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface Stability See below.
+Interface Stability	 See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/poolcfg.1m b/usr/src/man/man1m/poolcfg.1m
index 840d3999da..3b6973d0a2 100644
--- a/usr/src/man/man1m/poolcfg.1m
+++ b/usr/src/man/man1m/poolcfg.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH poolcfg 1M "29 Nov 2007" "SunOS 5.11" "System Administration Commands"
+.TH POOLCFG 1M "Nov 29, 2007"
 .SH NAME
 poolcfg \- create and modify resource pool configuration files
 .SH SYNOPSIS
@@ -49,46 +49,38 @@ The configurations which are created by this utility can be used by
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcommand\fR\fR
 .ad
 .RS 19n
-.rt  
 Specify \fIcommand\fR as an editing command. See \fBUSAGE\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 19n
-.rt  
 Operate directly on the kernel state. No \fIfilename\fR is allowed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIcommand_file\fR\fR
 .ad
 .RS 19n
-.rt  
 Take the commands from \fIcommand_file\fR. \fIcommand_file\fR consists of
 editing commands, one per line.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 19n
-.rt  
 Display extended information about the syntax of editing commands.
 .RE
 
@@ -99,7 +91,6 @@ Display extended information about the syntax of editing commands.
 A script consists of editing commands, one per line, of the following:
 .sp
 .ne 2
-.mk
 .na
 \fBinfo [\fIentity-name\fR]\fR
 .ad
@@ -113,7 +104,6 @@ output. If no entity is specified, system information is displayed. Therefore,
 
 .sp
 .ne 2
-.mk
 .na
 \fBcreate \fIentity-name\fR [\fIproperty-list\fR]\fR
 .ad
@@ -124,7 +114,6 @@ Make an entity of the specified type and name.
 
 .sp
 .ne 2
-.mk
 .na
 \fBdestroy \fIentity-name\fR\fR
 .ad
@@ -135,7 +124,6 @@ Remove the specified entity.
 
 .sp
 .ne 2
-.mk
 .na
 \fBmodify \fIentity-name\fR [\fIproperty-list\fR]\fR
 .ad
@@ -146,7 +134,6 @@ Change the listed properties on the named entity.
 
 .sp
 .ne 2
-.mk
 .na
 \fBassociate \fIpool-name\fR [\fIresource-list\fR]\fR
 .ad
@@ -158,7 +145,6 @@ connections.
 
 .sp
 .ne 2
-.mk
 .na
 \fBtransfer to [\fIresourcetype\fR] \fIname\fR[\fIcomponent-list\fR]\fR
 .ad
@@ -169,7 +155,6 @@ Transfer one or more discrete components to a resource .
 
 .sp
 .ne 2
-.mk
 .na
 \fBtransfer [\fIquantity\fR] from [\fIresourcetype\fR] [\fIsrc\fR] to
 [\fItgt\fR]\fR
@@ -181,7 +166,6 @@ Transfer a resource quantity from \fIsrc\fR to \fItgt\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBtransfer [\fIquantity\fR] to [\fIresourcetype\fR] [\fItgt\fR] from
 [\fIsrc\fR]\fR
@@ -193,7 +177,6 @@ Transfer a resource quantity to \fItgt\fR from \fIsrc\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBdiscover\fR
 .ad
@@ -214,7 +197,6 @@ with the \fB-s\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fBrename \fIentity-name\fR to \fInew-name\fR\fR
 .ad
@@ -271,92 +253,76 @@ holds. There is no deletion syntax for component lists.
 .SS "Recognized Entities"
 .sp
 .ne 2
-.mk
 .na
 \fBsystem\fR
 .ad
 .RS 10n
-.rt  
 Machine level entity
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBpool\fR
 .ad
 .RS 10n
-.rt  
 Named collection of resource associations
 .RE
 
 .SS "Resource Types"
 .sp
 .ne 2
-.mk
 .na
 \fBpset\fR
 .ad
 .RS 8n
-.rt  
 Processor set resource
 .RE
 
 .SS "Property Types"
 .sp
 .ne 2
-.mk
 .na
 \fBboolean\fR
 .ad
 .RS 11n
-.rt  
 Takes one of two values true or false.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBint\fR
 .ad
 .RS 11n
-.rt  
 A 64-bit signed integer value.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBuint\fR
 .ad
 .RS 11n
-.rt  
 A 64-bit unsigned integer value.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBstring\fR
 .ad
 .RS 11n
-.rt  
 Strings are delimited by quotes (\fB"\fR), and support the character escape
 sequences defined in \fBformats\fR(5).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBfloat\fR
 .ad
 .RS 11n
-.rt  
 Scientific notation is not supported.
 .RE
 
@@ -492,13 +458,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/poold.1m b/usr/src/man/man1m/poold.1m
index 0ed76b720d..0fdee07ddd 100644
--- a/usr/src/man/man1m/poold.1m
+++ b/usr/src/man/man1m/poold.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH poold 1M "1 Dec 2005" "SunOS 5.11" "System Administration Commands"
+.TH POOLD 1M "Dec 1, 2005"
 .SH NAME
 poold \- automated resource pools partitioning daemon
 .SH SYNOPSIS
@@ -67,12 +67,10 @@ objectives.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlevel\fR\fR
 .ad
 .RS 12n
-.rt  
 Specify the vebosity level for logging information.
 .sp
 Specify \fIlevel\fR as \fBALERT\fR, \fBCRIT\fR, \fBERR\fR, \fBWARNING\fR,
@@ -80,80 +78,66 @@ Specify \fIlevel\fR as \fBALERT\fR, \fBCRIT\fR, \fBERR\fR, \fBWARNING\fR,
 the default logging level is \fBINFO\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBALERT\fR\fR
 .ad
 .RS 11n
-.rt  
  A condition that should be corrected immediately, such as a corrupted system
 database.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCRIT\fR\fR
 .ad
 .RS 11n
-.rt  
 Critical conditions, such as hard device errors.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBERR\fR\fR
 .ad
 .RS 11n
-.rt  
 Errors.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBWARNING\fR\fR
 .ad
 .RS 11n
-.rt  
 Warning messages.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNOTICE\fR\fR
 .ad
 .RS 11n
-.rt  
  Conditions that are not error conditions, but that may require special
 handling.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBINFO\fR\fR
 .ad
 .RS 11n
-.rt  
 Informational messages.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDEBUG\fR\fR
 .ad
 .RS 11n
-.rt  
 Messages that contain information normally of use only when debugging a
 program.
 .RE
@@ -201,13 +185,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/poolstat.1m b/usr/src/man/man1m/poolstat.1m
index 2e01954a15..95cad74a03 100644
--- a/usr/src/man/man1m/poolstat.1m
+++ b/usr/src/man/man1m/poolstat.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH poolstat 1M "16 Jun 2009" "SunOS 5.11" "System Administration Commands"
+.TH POOLSTAT 1M "Jun 16, 2009"
 .SH NAME
 poolstat \- report active pool statistics
 .SH SYNOPSIS
@@ -14,7 +14,7 @@ poolstat \- report active pool statistics
 
 .LP
 .nf
-\fBpoolstat\fR [\fB-p\fR \fIpool-list\fR] [\fB-o\fR \fIformat\fR \fB-r\fR \fIrset-list\fR] 
+\fBpoolstat\fR [\fB-p\fR \fIpool-list\fR] [\fB-o\fR \fIformat\fR \fB-r\fR \fIrset-list\fR]
      [\fB-T\fR u | d ] [\fIinterval\fR [\fIcount\fR]]
 .fi
 
@@ -40,100 +40,82 @@ of statistical data for the processor set attached to the pool.
 The columns are defined as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBid\fR\fR
 .ad
 .RS 8n
-.rt  
 Pool ID.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpool\fR\fR
 .ad
 .RS 8n
-.rt  
 Pool name.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrid\fR\fR
 .ad
 .RS 8n
-.rt  
 Resource set id.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrset\fR\fR
 .ad
 .RS 8n
-.rt  
 Resource set name.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtype\fR\fR
 .ad
 .RS 8n
-.rt  
 Resource set type.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmin\fR\fR
 .ad
 .RS 8n
-.rt  
 Minimum resource set size.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmax\fR\fR
 .ad
 .RS 8n
-.rt  
 Maximum resource set size.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsize\fR\fR
 .ad
 .RS 8n
-.rt  
 Current resource set size.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBused\fR\fR
 .ad
 .RS 8n
-.rt  
 The measure of how much of the resource set is currently is use. This is
 calculated as the percentage utilization of the resource set multiplied by its
 size. If resource set has been reconfigured during last sampling interval, this
@@ -142,12 +124,10 @@ value might be not reported (\fB-\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBload\fR\fR
 .ad
 .RS 8n
-.rt  
 The absolute representation of the load that is put on the resource set. For
 the definition of this property see \fBlibpool\fR(3LIB).
 .RE
@@ -158,12 +138,10 @@ the definition of this property see \fBlibpool\fR(3LIB).
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIformat\fR\fR
 .ad
 .RS 16n
-.rt  
 Report statistics according to the format specification given in format. See
 \fBDISPLAY FORMATS\fR.
 .sp
@@ -179,12 +157,10 @@ The \fB-o\fR option must be used in conjunction with the \fB-r\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIpool-list\fR\fR
 .ad
 .RS 16n
-.rt  
 Report only pools whose names are in the given list. If the -r option is also
 used, this option selects only resource sets which belong to pools in the given
 list. Statistics for pools or resource sets are reported in the same order in
@@ -197,12 +173,10 @@ only be separated by spaces.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrset-list\fR\fR
 .ad
 .RS 16n
-.rt  
 Report resource set statistics. If the \fIrset-list\fR argument is "\fBall\fR",
 then all possible resource set types are selected.
 .sp
@@ -212,23 +186,19 @@ separated by commas or enclosed in quotes and separated by commas or spaces.
 The following resource set types are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBall\fR\fR
 .ad
 .RS 8n
-.rt  
 All resource set types
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpset\fR\fR
 .ad
 .RS 8n
-.rt  
 Processor set
 .RE
 
@@ -236,12 +206,10 @@ Processor set
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fBu\fR | \fBd\fR\fR
 .ad
 .RS 16n
-.rt  
 Display a time stamp.
 .sp
 Specify \fBu\fR for a printed representation of the internal representation of
@@ -255,12 +223,10 @@ time. See \fBtime\fR(2). Specify \fBd\fR for standard date format. See
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcount\fR\fR
 .ad
 .RS 12n
-.rt  
 The number of times that the statistics are repeated. By default, poolstat
 reports statistics only once.
 .sp
@@ -270,12 +236,10 @@ interval is specified and count is not, statistics are reported indefinitely.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIinterval\fR\fR
 .ad
 .RS 12n
-.rt  
 The sampling interval in seconds.
 .sp
 If neither interval nor count are specified, statistics are reported once. If
@@ -310,7 +274,7 @@ The following example reports resource set statistics.
 .sp
 .in +2
 .nf
- 
+
 % poolstat -r pset
   id pool           type rid rset          min  max size used load
   0 pool_default    pset  -1 pset_default    1  65K    2  1.2  8.3
@@ -376,34 +340,28 @@ The following example customizes output:
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 An error occurred.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Invalid command line options were specified.
 .RE
 
@@ -415,13 +373,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-StabilityEvolving
+Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ports.1m b/usr/src/man/man1m/ports.1m
index 044254b1b8..377b00cf13 100644
--- a/usr/src/man/man1m/ports.1m
+++ b/usr/src/man/man1m/ports.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ports 1M "8 Nov 2002" "SunOS 5.11" "System Administration Commands"
+.TH PORTS 1M "Nov 8, 2002"
 .SH NAME
 ports \- creates /dev entries and inittab entries for serial lines
 .SH SYNOPSIS
@@ -116,12 +116,10 @@ the above node types when calling \fBddi_create_minor_node\fR(9F).
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fI rootdir\fR\fR
 .ad
 .RS 14n
-.rt  
 Causes \fBports\fR to presume that the \fB/dev/term\fR, \fB/dev/cua\fR, and
 \fB/devices\fR directories are found under \fIrootdir\fR, not directly under
 \fB/\fR. If this argument is specified, \fBsacadm\fR(1M) is not invoked, since
@@ -143,8 +141,8 @@ the \fBxkserial\fR driver's \fBattach\fR(9E) function:
 /*
 * Create the minor number by combining the instance number
 * with the port number.
-*/ #define XKNUMPORTS           8 
-#define XKMINORNUM(i, p)     ((i) << 4 | (p)) 
+*/ #define XKNUMPORTS           8
+#define XKMINORNUM(i, p)     ((i) << 4 | (p))
 #define XKMINORNUM_DO(i, p)  ((i) << 4 | (p) | 0x80)
 int
 xkserialattach(dev_info_t *dip, ddi_attach_cmd_t cmd)
@@ -251,46 +249,38 @@ and \fB/dev/cua\fR contain symbolic links to the dialout port device nodes in
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/term/\fR\fIn\fR\fR
 .ad
 .RS 16n
-.rt  
 Logical serial port devices
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/cua/\fR\fIn\fR\fR
 .ad
 .RS 16n
-.rt  
 Logical dialout port devices
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inittab\fR\fR
 .ad
 .RS 16n
-.rt  
- 
+
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/saf/*\fR\fR
 .ad
 .RS 16n
-.rt  
- 
+
 .RE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/powerd.1m b/usr/src/man/man1m/powerd.1m
index 9c3ebb65e8..6b95512ddd 100644
--- a/usr/src/man/man1m/powerd.1m
+++ b/usr/src/man/man1m/powerd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH powerd 1M "15 Oct 1999" "SunOS 5.11" "System Administration Commands"
+.TH POWERD 1M "Oct 15, 1999"
 .SH NAME
 powerd \- power manager daemon
 .SH SYNOPSIS
@@ -31,12 +31,10 @@ the shutdown, which broadcasts a notification.
 The following option is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 6n
-.rt  
 No broadcast mode. The daemon silently shuts down the system without notifying
 \fBsyslogd\fR(1M).
 .RE
@@ -44,12 +42,10 @@ No broadcast mode. The daemon silently shuts down the system without notifying
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/power.conf\fR\fR
 .ad
 .RS 19n
-.rt  
 Power Management configuration information file
 .RE
 
@@ -61,13 +57,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface Stability Unstable 
+Interface Stability 	Unstable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/powertop.1m b/usr/src/man/man1m/powertop.1m
index 274b84288f..cedab13ae2 100644
--- a/usr/src/man/man1m/powertop.1m
+++ b/usr/src/man/man1m/powertop.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH powertop 1M "19 May 2009" "SunOS 5.11" "System Administration Commands"
+.TH POWERTOP 1M "May 19, 2009"
 .SH NAME
 powertop \- report and analyze events that affect power management
 .SH SYNOPSIS
@@ -68,7 +68,6 @@ regarding the current virtualized environment.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR [\fIprocessor_id\fR]\fR
 .ad
@@ -79,7 +78,6 @@ Specifies which CPU the tool should observe.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR [\fIcount\fR]\fR
 .ad
@@ -90,7 +88,6 @@ Dumps the results of \fIcount\fR analysis of system activity to the screen.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -101,7 +98,6 @@ Displays the command's usage.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR [\fIinterval\fR]\fR
 .ad
@@ -113,7 +109,6 @@ possible values are between 1 and 100; the default is 5 seconds.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -184,7 +179,6 @@ The following command runs PowerTOP and only displays data for CPU 3:
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -195,7 +189,6 @@ Successful operation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
@@ -206,7 +199,6 @@ An error occurred.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
@@ -223,15 +215,14 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Architecturex86, SPARC
+Architecture	x86, SPARC
 _
-Interface StabilityVolatile
+Interface Stability	Volatile
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ppdmgr.1m b/usr/src/man/man1m/ppdmgr.1m
index d0d416b32d..be63ba9bc5 100644
--- a/usr/src/man/man1m/ppdmgr.1m
+++ b/usr/src/man/man1m/ppdmgr.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ppdmgr 1M "9 Mar 2007" "SunOS 5.11" "System Administration Commands"
+.TH PPDMGR 1M "Mar 9, 2007"
 .SH NAME
 ppdmgr \- utility for managing PPD files
 .SH SYNOPSIS
@@ -56,7 +56,6 @@ name may not contain a semi-colon (:).
 The following subcommand are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIppd_file_path\fR\fR
 .ad
@@ -70,7 +69,6 @@ name to the PPD file. The utility accepts a valid PPD file with either a
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR \fIlabel\fR\fR
 .ad
@@ -82,57 +80,47 @@ option, the default label is "\fBuser\fR". When specified with the \fB-r\fR or
 labels:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcaches\fR\fR
 .ad
 .RS 16n
-.rt  
 may never be specified
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBppdcache\fR\fR
 .ad
 .RS 16n
-.rt  
 may never be specified
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmanufaliases\fR\fR
 .ad
 .RS 16n
-.rt  
 may never be specified
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBall\fR\fR
 .ad
 .RS 16n
-.rt  
 applies the specified action to all labels in a repository, and may only be
 specified with the \fB-r\fR or \fB-u\fR option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSUNW*\fR\fR
 .ad
 .RS 16n
-.rt  
 anything starting with \fBSUNW\fR is reserved and should not be specified with
 the \fB-a\fR option.
 .RE
@@ -141,7 +129,6 @@ the \fB-a\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIrepository_name\fR\fR
 .ad
@@ -158,7 +145,6 @@ The default repository name is "\fBuser\fR". Only the "\fBuser\fR" or
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -170,7 +156,6 @@ repository.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
@@ -182,7 +167,6 @@ repository.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR\fR
 .ad
@@ -295,23 +279,19 @@ label in the "\fBuser\fR" repository:
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -323,13 +303,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/pppd.1m b/usr/src/man/man1m/pppd.1m
index 9bd263390d..0e7cc95459 100644
--- a/usr/src/man/man1m/pppd.1m
+++ b/usr/src/man/man1m/pppd.1m
@@ -3,7 +3,7 @@
 .\" Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by Carnegie Mellon University.  The name of the University may not be used to endorse or promote products derived from this software without specific prior written permission.  THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
 .\" WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 .\" Portions Copyright (c) 2008, Sun Microsystems, Inc. All Right Reserved.
-.TH pppd 1M "21 Nov 2001" "SunOS 5.11" "System Administration Commands"
+.TH PPPD 1M "Nov 21, 2001"
 .SH NAME
 pppd \- point to point protocol daemon
 .SH SYNOPSIS
@@ -53,12 +53,10 @@ file.
 .SS "Frequently Used Options"
 .sp
 .ne 2
-.mk
 .na
 \fB\fB<tty_name>\fR \fR
 .ad
 .RS 23n
-.rt  
 Communicate over the named device. The string \fB/dev/\fR is prepended if
 necessary. If no device name is given, or if the name of the terminal connected
 to the standard input is given, \fBpppd\fR uses that terminal and does not fork
@@ -68,24 +66,20 @@ source cannot be overridden by a non-privileged user.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB<speed>\fR \fR
 .ad
 .RS 23n
-.rt  
 Set the baud rate to <\fBspeed\fR> (a decimal number). The default is to leave
 the baud rate unchanged. This option is normally needed for dial-out only.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBasyncmap\fR \fB\fI<map>\fR\fR \fR
 .ad
 .RS 23n
-.rt  
 Set the \fBasync\fR character map to \fI<map>\fR\&. The map describes which
 control characters cannot be successfully received over the serial line.
 \fBpppd\fR asks the peer to send these characters as a 2-byte escape sequence.
@@ -101,12 +95,10 @@ characters.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBauth\fR \fR
 .ad
 .RS 23n
-.rt  
 Require the peer to authenticate itself before allowing network packets to be
 sent or received. This option is the default if the system has a default route.
 If the \fBauth\fR or the \fBnoauth\fR option is not specified, \fBpppd\fR
@@ -116,12 +108,10 @@ already have a route.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcall\fR \fB\fIname\fR\fR \fR
 .ad
 .RS 23n
-.rt  
 Read options from the file \fB/etc/ppp/peers/\fR\fIname\fR. This file may
 contain privileged options, including \fBnoauth\fR, even if \fBpppd\fR is not
 being run by root. The \fIname\fR string may not begin with a slash ("/") or
@@ -130,23 +120,19 @@ include consecutive periods \fB("..")\fR as a pathname component.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcallback\fR \fB\fInumber\fR\fR \fR
 .ad
 .RS 23n
-.rt  
 Request a callback to the given telephone number using Microsoft CBCP.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconnect\fR \fB\fIscript\fR\fR \fR
 .ad
 .RS 23n
-.rt  
 Use the executable or shell command specified by \fIscript\fR to set up the
 serial line. This script would typically use the \fBchat\fR(1M) program to dial
 the modem and start the remote \fBPPP\fR session. A value for this option
@@ -156,12 +142,10 @@ user.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcrtscts\fR \fR
 .ad
 .RS 23n
-.rt  
 Use hardware flow control, that is, RTS/CTS, to control the flow of data on the
 serial port. If the \fBcrtscts\fR, \fBnocrtscts\fR, \fBcdtrcts\fR or
 \fBnocdtrcts\fR option is not provided, the hardware flow control setting for
@@ -174,12 +158,10 @@ DTR as a modem control line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdefaultroute\fR \fR
 .ad
 .RS 23n
-.rt  
 Add a default route to the system routing tables when IPCP negotiation
 successfully completes, using the peer as the gateway. This entry is removed
 when the \fBPPP\fR connection is broken. This option is privileged if the
@@ -188,12 +170,10 @@ when the \fBPPP\fR connection is broken. This option is privileged if the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisconnect\fR \fB \fIscript\fR\fR \fR
 .ad
 .RS 23n
-.rt  
 Run the executable or shell command specified by \fIscript\fR after \fBpppd\fR
 terminates the link. Typically, this script is used to command the modem to
 hang up if hardware modem control signals are not available. \fBdisconnect\fR
@@ -204,12 +184,10 @@ user.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBescape\fR \fB\fIxx,yy,...\fR\fR \fR
 .ad
 .RS 23n
-.rt  
 Specifies that certain characters be escaped on transmission regardless of
 whether the peer requests them to be escaped with its \fBasync\fR control
 character map. The characters to be escaped are specified as a list of hex
@@ -221,12 +199,10 @@ containing hex values 0x20 through 0x3f and 0x5e.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfile\fR \fB\fIname\fR\fR \fR
 .ad
 .RS 23n
-.rt  
 Read options from file \fIname\fR. If this option is used on the command line
 or in \fB$HOME/.ppprc\fR, the file must be readable by the user invoking
 \fBpppd\fR. See  for a list of files that \fBpppd\fR always reads, regardless
@@ -235,12 +211,10 @@ of the use of this option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinit\fR \fB \fIscript\fR \fR \fR
 .ad
 .RS 23n
-.rt  
 Run the executable or shell command specified by \fIscript\fR to initialize the
 serial line. This script would typically use the \fBchat\fR(1M) program to
 configure the modem to enable auto-answer. A value for this option from a
@@ -249,24 +223,20 @@ privileged source cannot be overridden by a non-privileged user.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlock\fR \fR
 .ad
 .RS 23n
-.rt  
 Directs \fBpppd\fR to create a UUCP-style lock file for the serial device to
 ensure exclusive access to the device.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmru\fR \fB\fIn\fR\fR \fR
 .ad
 .RS 23n
-.rt  
 Set the Maximum Receive Unit (MRU) value to \fIn\fR. \fBpppd\fR asks the peer
 to send packets of no more than \fIn\fR bytes. Minimum MRU value is 128.
 Default MRU value is 1500. A value of 296 is recommended for slow links (40
@@ -276,12 +246,10 @@ bytes for TCP/IP header + 256 bytes of data). For IPv6, MRU must be at least
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmtu\fR \fB\fIn\fR\fR \fR
 .ad
 .RS 23n
-.rt  
 Set the Maximum Transmit Unit (MTU) value to \fIn\fR. Unless the peer requests
 a smaller value via MRU negotiation, \fBpppd\fR requests the kernel networking
 code to send data packets of no more than \fIn\fR bytes through the PPP network
@@ -290,12 +258,10 @@ interface. For IPv6, MTU must be at least 1280.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpassive\fR \fR
 .ad
 .RS 23n
-.rt  
 Enables the "passive" option in the LCP. With this option, \fBpppd\fR attempts
 to initiate a connection; if no reply is received from the peer, \fBpppd\fR
 waits passively for a valid LCP packet instead of exiting, as it would without
@@ -305,7 +271,6 @@ this option.
 .SS "Options"
 .sp
 .ne 2
-.mk
 .na
 \fB\fB<local_IP_address>:<remote_IP_address>\fR \fR
 .ad
@@ -325,7 +290,6 @@ respectively.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBallow-fcs\fR \fB\fIfcs-type\fR\fR \fR
 .ad
@@ -339,7 +303,6 @@ type not listed, a LCP Configure-Nak is sent to request only the listed types.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBallow-ip\fR \fB\fIaddress(es)\fR\fR \fR
 .ad
@@ -353,7 +316,6 @@ more more details.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbsdcomp\fR \fB\fInr,nt\fR\fR \fR
 .ad
@@ -374,7 +336,6 @@ from the privileged source.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcdtrcts\fR \fR
 .ad
@@ -391,7 +352,6 @@ control line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBchap-interval\fR \fB\fIn\fR\fR\fR
 .ad
@@ -403,7 +363,6 @@ seconds.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBchap-max-challenge\fR \fB\fIn\fR\fR \fR
 .ad
@@ -414,7 +373,6 @@ Set the maximum number of CHAP challenge transmissions to \fIn\fR (default 10).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBchap-restart\fR \fB\fIn\fR\fR \fR
 .ad
@@ -426,7 +384,6 @@ Set the CHAP restart interval (retransmission timeout for challenges) to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconnect-delay\fR \fB\fIn\fR\fR \fR
 .ad
@@ -441,7 +398,6 @@ applies only if the \fBconnect\fR or \fBpty\fR option is used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdatarate\fR \fB\fIn\fR\fR \fR
 .ad
@@ -453,7 +409,6 @@ Set maximum data rate to \fIn\fR (in bytes per second) when using the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdebug\fR \fR
 .ad
@@ -468,7 +423,6 @@ The packets are logged through syslog with facility \fBdaemon\fR and level
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdefault-asyncmap\fR \fR
 .ad
@@ -480,7 +434,6 @@ escaped for both the transmit and the receive direction.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdefault-fcs\fR \fR
 .ad
@@ -493,7 +446,6 @@ specified by the peer, then LCP Configure-Reject is sent.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdefault-mru\fR \fR
 .ad
@@ -506,7 +458,6 @@ directions.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdeflate\fR \fB\fInr,nt,e\fR\fR \fR
 .ad
@@ -530,7 +481,6 @@ code size larger than the value from the privileged source.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdemand\fR \fR
 .ad
@@ -550,7 +500,6 @@ in conjunction with the \fBdemand\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdomain\fR \fB\fId\fR\fR \fR
 .ad
@@ -566,7 +515,6 @@ the default name when authenticating to the peer. This option is privileged.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBendpoint\fR \fB\fIendpoint-value\fR\fR \fR
 .ad
@@ -586,7 +534,6 @@ implementation does not support multilink.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfcs\fR \fB\fIfcs-type\fR\fR \fR
 .ad
@@ -603,7 +550,6 @@ to the default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhide-password\fR \fR
 .ad
@@ -615,7 +561,6 @@ exclude the password string from the log. This is the default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBholdoff\fR \fB\fIn\fR\fR \fR
 .ad
@@ -629,7 +574,6 @@ because it was idle.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBident\fR \fB\fIstring\fR\fR \fR
 .ad
@@ -641,7 +585,6 @@ similar to that displayed by the \fB--version\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBidle\fR \fB\fIn\fR\fR \fR
 .ad
@@ -655,7 +598,6 @@ the \fBdemand\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipcp-accept-local\fR \fR
 .ad
@@ -667,7 +609,6 @@ even if the local IP address is specified in an option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipcp-accept-remote\fR \fR
 .ad
@@ -679,7 +620,6 @@ even if the remote IP address is specified in an option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipcp-max-configure\fR \fB\fIn\fR\fR \fR
 .ad
@@ -691,7 +631,6 @@ Set the maximum number of IPCP Configure-Request transmissions to \fIn\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipcp-max-failure\fR \fB\fIn\fR\fR \fR
 .ad
@@ -703,7 +642,6 @@ Configure-Rejects instead to \fIn\fR (default 10).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipcp-max-terminate\fR \fB\fIn\fR\fR \fR
 .ad
@@ -715,7 +653,6 @@ Set the maximum number of IPCP terminate-request transmissions to \fIn\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipcp-restart\fR \fB\fIn\fR\fR \fR
 .ad
@@ -727,7 +664,6 @@ Set the IPCP restart interval (retransmission timeout) to \fIn\fR seconds
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipparam\fR \fB\fIstring\fR\fR \fR
 .ad
@@ -740,7 +676,6 @@ scripts. See the  section.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipv6\fR
 \fB\fI<local_interface_identifier>\fR,\fI<remote_interface_identifier>\fR\fR
@@ -758,7 +693,6 @@ can be used instead of the \fBipv6 <local>,<remote>\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipv6cp-accept-local\fR \fR
 .ad
@@ -769,7 +703,6 @@ Accept peer's interface identifier for the local link identifier.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipv6cp-max-configure\fR \fB\fIn\fR\fR \fR
 .ad
@@ -781,7 +714,6 @@ Set the maximum number of IPv6CP Configure-Request transmissions to \fIn\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipv6cp-max-failure\fR \fB\fIn\fR\fR \fR
 .ad
@@ -793,7 +725,6 @@ Configure-Rejects instead to \fIn\fR (default 10).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipv6cp-max-terminate\fR \fB\fIn\fR\fR \fR
 .ad
@@ -805,7 +736,6 @@ Set the maximum number of IPv6CP terminate-request transmissions to \fIn\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipv6cp-restart\fR \fB\fIn\fR\fR \fR
 .ad
@@ -817,7 +747,6 @@ Set the IPv6CP restart interval (retransmission timeout) to \fIn\fR seconds
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipv6cp-use-ipaddr\fR \fR
 .ad
@@ -832,7 +761,6 @@ with \fBipcp-accept-remote\fR if the remote IPv6 identifier is unspecified.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipv6cp-use-persistent\fR \fR
 .ad
@@ -843,7 +771,6 @@ Use uniquely-available persistent value for link local address.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBkdebug\fR \fB\fIn\fR\fR \fR
 .ad
@@ -860,7 +787,6 @@ Use the \fBdebug\fR option instead.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlcp-echo-failure\fR \fB\fIn\fR\fR \fR
 .ad
@@ -876,7 +802,6 @@ has hung up) in situations where no hardware modem control lines are available.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlcp-echo-interval\fR \fB\fIn\fR\fR \fR
 .ad
@@ -890,7 +815,6 @@ option to detect that the peer is no longer connected.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlcp-max-configure\fR \fB\fIn\fR\fR \fR
 .ad
@@ -902,7 +826,6 @@ Set the maximum number of LCP Configure-Request transmissions to \fIn\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlcp-max-failure\fR \fB\fIn\fR\fR \fR
 .ad
@@ -914,7 +837,6 @@ Configure-Rejects instead to \fIn\fR (default 10).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlcp-max-terminate\fR \fB\fIn\fR\fR \fR
 .ad
@@ -926,7 +848,6 @@ Set the maximum number of LCP Terminate-Request transmissions to \fIn\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlcp-restart\fR \fB\fIn\fR\fR \fR
 .ad
@@ -938,7 +859,6 @@ Set the LCP restart interval (retransmission timeout) to \fIn\fR seconds
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlinkname\fR \fB\fIname\fR\fR \fR
 .ad
@@ -952,7 +872,6 @@ for the link to a given peer system. This is a privileged option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlocal\fR \fR
 .ad
@@ -965,7 +884,6 @@ of the DTR (Data Terminal Ready) signal.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlogfd\fR \fB\fIn\fR\fR \fR
 .ad
@@ -980,7 +898,6 @@ unless the serial port is open on stdout.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlogfile\fR \fB\fIfilename\fR\fR \fR
 .ad
@@ -993,7 +910,6 @@ invoked \fBpppd\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlogin\fR \fR
 .ad
@@ -1007,7 +923,6 @@ to be allowed access.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmaxconnect\fR \fB\fIn\fR\fR \fR
 .ad
@@ -1021,7 +936,6 @@ starts, and again when 5, 2, and 0.5 minutes are remaining.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmaxfail\fR \fB\fIn\fR\fR \fR
 .ad
@@ -1033,7 +947,6 @@ means no limit. The default value is 10.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmodem\fR \fR
 .ad
@@ -1048,7 +961,6 @@ terminated and before executing the connect script.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBms-dns\fR \fB\fI<addr>\fR\fR \fR
 .ad
@@ -1065,7 +977,6 @@ versions of \fBpppd\fR under the name \fBdns-addr\fR.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBms-lanman\fR \fR
 .ad
@@ -1078,7 +989,6 @@ Microsoft NT.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBms-wins\fR \fB\fI<addr>\fR\fR \fR
 .ad
@@ -1095,7 +1005,6 @@ and secondary.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBname\fR \fB\fIname\fR\fR \fR
 .ad
@@ -1112,7 +1021,6 @@ domain name to \fIname\fR.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBno-accm-test\fR \fR
 .ad
@@ -1127,7 +1035,6 @@ operation with random failures. This option disables that feature.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnoaccomp\fR \fR
 .ad
@@ -1138,7 +1045,6 @@ Disable HDLC Address/Control compression in both directions (send and receive).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnoauth\fR \fR
 .ad
@@ -1149,7 +1055,6 @@ Do not require the peer to authenticate itself. This option is privileged.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnobsdcomp\fR \fR
 .ad
@@ -1162,7 +1067,6 @@ compress packets using the BSD-Compress scheme. This option is not necessary if
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnoccp\fR \fR
 .ad
@@ -1176,7 +1080,6 @@ compression do not need to be separately disabled.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnocrtscts\fR \fR
 .ad
@@ -1190,7 +1093,6 @@ unchanged.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnocdtrcts\fR \fR
 .ad
@@ -1202,7 +1104,6 @@ forms of hardware flow control.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnodefaultroute\fR \fR
 .ad
@@ -1215,7 +1116,6 @@ creating default routes with \fBpppd\fR by placing this option in the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnodeflate\fR \fR
 .ad
@@ -1228,7 +1128,6 @@ is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnodeflatedraft\fR \fR
 .ad
@@ -1240,7 +1139,6 @@ compression. This option is not necessary if \fBnoccp\fR is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnodetach\fR \fR
 .ad
@@ -1253,7 +1151,6 @@ on the standard input is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnoendpoint\fR \fR
 .ad
@@ -1264,7 +1161,6 @@ Do not send or accept the Multilink Endpoint Discriminator option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnoident\fR \fR
 .ad
@@ -1278,7 +1174,6 @@ Code-Reject in response to received LCP Identification messages.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnoip\fR \fR
 .ad
@@ -1290,7 +1185,6 @@ has bugs or becomes confused by requests from \fBpppd\fR for IPCP negotiation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnoipv6\fR \fR
 .ad
@@ -1302,7 +1196,6 @@ default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnoipdefault\fR \fR
 .ad
@@ -1316,7 +1209,6 @@ option, the peer must supply the local IP address during IPCP negotiation
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnolog\fR \fR
 .ad
@@ -1329,7 +1221,6 @@ option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnomagic\fR \fR
 .ad
@@ -1342,7 +1233,6 @@ option to work around the "Serial line is looped back" error message.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnopam\fR \fR
 .ad
@@ -1355,7 +1245,6 @@ mechanisms. The default is not to use PAM.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnopcomp\fR \fR
 .ad
@@ -1367,7 +1256,6 @@ direction.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnopersist\fR \fR
 .ad
@@ -1379,7 +1267,6 @@ the \fBpersist\fR or \fBdemand\fR option is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnoplink\fR \fR
 .ad
@@ -1394,7 +1281,6 @@ modinsert, modremove or unplumb support is needed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnopredictor1\fR \fR
 .ad
@@ -1406,7 +1292,6 @@ compatibility. The implementation does not support Predictor-1 compression.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnoproxyarp\fR \fR
 .ad
@@ -1419,7 +1304,6 @@ proxy ARP entries with \fBpppd\fR, place this option in the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnotty\fR \fR
 .ad
@@ -1439,7 +1323,6 @@ given if this option is used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnovj\fR \fR
 .ad
@@ -1451,7 +1334,6 @@ the receive direction.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnovjccomp\fR \fR
 .ad
@@ -1465,7 +1347,6 @@ the peer to do so. This option is unnecessary if \fBnovj\fR is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpam\fR \fR
 .ad
@@ -1479,7 +1360,6 @@ is not to use PAM.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpapcrypt\fR \fR
 .ad
@@ -1493,7 +1373,6 @@ file. Use this option if the secrets in the \fBpap-secrets\fR file are in
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpap-max-authreq\fR \fB\fIn\fR\fR \fR
 .ad
@@ -1505,7 +1384,6 @@ Set the maximum number of PAP authenticate-request transmissions to \fIn\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpap-restart\fR \fB\fIn\fR\fR \fR
 .ad
@@ -1517,7 +1395,6 @@ Set the PAP restart interval (retransmission timeout) to \fIn\fR seconds
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpap-timeout\fR \fB\fIn\fR\fR \fR
 .ad
@@ -1529,7 +1406,6 @@ with PAP to \fIn\fR seconds (0= no limit). The default is 30 seconds.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpassword\fR \fB\fIstring\fR\fR \fR
 .ad
@@ -1540,7 +1416,6 @@ Password string for authentication to the peer.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpersist\fR \fR
 .ad
@@ -1552,7 +1427,6 @@ connection.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBplink\fR \fR
 .ad
@@ -1568,7 +1442,6 @@ option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBplugin\fR \fB\fIfilename\fR\fR \fR
 .ad
@@ -1582,7 +1455,6 @@ object to load in that order.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBplumbed\fR \fR
 .ad
@@ -1598,7 +1470,6 @@ may be helpful when \fBpppd\fR is used with external applications that use
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpppmux\fR \fB\fItimer\fR\fR \fR
 .ad
@@ -1610,7 +1481,6 @@ timeout to \fItimer\fR microseconds.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprivgroup\fR \fB\fIgroup-name\fR\fR \fR
 .ad
@@ -1625,7 +1495,6 @@ careful using this option. Consider it equivalent to putting the members of
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBproxyarp\fR \fR
 .ad
@@ -1640,7 +1509,6 @@ Ethernet interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpty\fR \fB \fIscript\fR\fR \fR
 .ad
@@ -1657,7 +1525,6 @@ process will have pipes on its standard input and output.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBreceive-all\fR \fR
 .ad
@@ -1672,7 +1539,6 @@ dial-back implementations.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrecord\fR \fB\fIfilename\fR\fR \fR
 .ad
@@ -1692,7 +1558,6 @@ the \fBdebug\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremotename\fR \fB\fIname\fR\fR \fR
 .ad
@@ -1705,7 +1570,6 @@ Challenge messages, and this option is often used to work around this problem.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrefuse-chap\fR \fR
 .ad
@@ -1718,7 +1582,6 @@ not affected.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrefuse-mschap\fR \fR
 .ad
@@ -1731,7 +1594,6 @@ with LCP Configure-Nak. That option does not disable any other form of CHAP.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrefuse-mschapv2\fR \fR
 .ad
@@ -1744,7 +1606,6 @@ Configure-Nak. That option does not disable any other form of CHAP.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrefuse-pap\fR \fR
 .ad
@@ -1756,7 +1617,6 @@ using Password Authentication Protocol (PAP).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrequire-chap\fR \fR
 .ad
@@ -1768,7 +1628,6 @@ MS-CHAP is not affected.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrequire-mschap\fR \fR
 .ad
@@ -1779,7 +1638,6 @@ Require the peer to authenticate itself using MS-CHAPv1 authentication.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrequire-mschapv2\fR \fR
 .ad
@@ -1790,7 +1648,6 @@ Require the peer to authenticate itself using MS-CHAPv2 authentication.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrequire-pap\fR \fR
 .ad
@@ -1801,7 +1658,6 @@ Require the peer to authenticate itself using PAP authentication.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshow-password\fR \fR
 .ad
@@ -1813,7 +1669,6 @@ password string in the log message.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsilent\fR \fR
 .ad
@@ -1827,7 +1682,6 @@ compatibility, but the current \fBpassive\fR option is preferred.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsmall-accm-test\fR \fR
 .ad
@@ -1841,7 +1695,6 @@ tested. This option is useful on very slow links.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsocket\fR \fB\fIhost\fR:\fIport\fR\fR \fR
 .ad
@@ -1852,7 +1705,6 @@ Connect to given host and port using TCP and run PPP over this connection.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsync\fR \fR
 .ad
@@ -1865,7 +1717,6 @@ by \fBpppd\fR with this option must have sync support. Currently supports
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunit\fR \fB\fIn\fR\fR \fR
 .ad
@@ -1876,7 +1727,6 @@ Set PPP interface unit number to \fIn\fR, if possible.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBupdetach\fR \fR
 .ad
@@ -1890,7 +1740,6 @@ messages from the debug option are directed to \fBpppd\fR's standard output.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBusehostname\fR \fR
 .ad
@@ -1904,7 +1753,6 @@ normally not needed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBusepeerdns\fR \fR
 .ad
@@ -1919,7 +1767,6 @@ address(es) supplied by the peer.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBuser\fR \fB\fIname\fR\fR \fR
 .ad
@@ -1931,7 +1778,6 @@ Sets the name used for authenticating the local system to the peer to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvj-max-slots\fR \fB\fIn\fR\fR \fR
 .ad
@@ -1944,7 +1790,6 @@ and 16 (inclusive).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwelcome\fR \fB\fIscript\fR\fR \fR
 .ad
@@ -1958,7 +1803,6 @@ user.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBxonxoff\fR \fR
 .ad
@@ -1974,12 +1818,10 @@ the serial port.
 The following options are obsolete:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB+ua\fR \fB\fIname\fR\fR\fR
 .ad
 .RS 14n
-.rt  
 Read a PAP user name and password from the file \fIname\fR. This file must have
 two lines for name and password. Name and password are sent to the peer when
 the peer requests PAP authentication.
@@ -1987,34 +1829,28 @@ the peer requests PAP authentication.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB+ipv6\fR \fR
 .ad
 .RS 14n
-.rt  
 Enable IPv6 and IPv6CP without specifying interface identifiers.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--version\fR \fR
 .ad
 .RS 14n
-.rt  
 Show version number and exit.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--help\fR \fR
 .ad
 .RS 14n
-.rt  
 Show brief help message and exit.
 .RE
 
@@ -2063,7 +1899,7 @@ that is, \fB/etc/ppp/options\fR or an options file read using the \fBcall\fR
 option, \fBpppd\fR uses full root privileges when opening the device. Thus, by
 creating an appropriate file under \fB/etc/ppp/peers\fR, the system
 administrator can allow users to establish a PPP connection via a device that
-they 	would not normally have access to. Otherwise \fBpppd\fR uses the invoking
+they would not normally have access to. Otherwise \fBpppd\fR uses the invoking
 user's real UID when opening the device.
 .SS "Authentication"
 .sp
@@ -2152,7 +1988,7 @@ that name will be used as the peer's name. If that fails, \fBpppd\fR uses the
 null string as the peer's name.
 .sp
 .LP
-When authenticating the peer with PAP, the supplied password	is compared with
+When authenticating the peer with PAP, the supplied password is compared with
 data in the secrets file. If the password and secret do not match, the password
 is encrypted using \fBcrypt()\fR and checked against the secret again. If the
 \fBpapcrypt\fR option is given, the first unencrypted comparison is omitted for
@@ -2176,7 +2012,7 @@ address for the remote host, IPCP is closed. IP packets are sent or received
 only when IPCP is open.
 .sp
 .LP
-To allow hosts that cannot authenticate themselves to connect 	and use one of a
+To allow hosts that cannot authenticate themselves to connect and use one of a
 restricted set of IP addresses, add a line to the \fBpap-secrets\fR file
 specifying the empty string for the client name and secret.
 .sp
@@ -2238,90 +2074,74 @@ except for some environment variables that give information about the link. The
 \fBpppd\fR environment variables are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDEVICE\fR \fR
 .ad
 .RS 15n
-.rt  
 Name of the serial tty device.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBIFNAME\fR \fR
 .ad
 .RS 15n
-.rt  
 Name of the network interface.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBIPLOCAL\fR \fR
 .ad
 .RS 15n
-.rt  
 IP address for the link's local end. This is set only when IPCP has started.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBIPREMOTE\fR \fR
 .ad
 .RS 15n
-.rt  
 IP address for the link's remote end. This is set only when IPCP has started.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPEERNAME\fR \fR
 .ad
 .RS 15n
-.rt  
 Authenticated name of the peer. This is set only if the peer authenticates
 itself.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSPEED\fR \fR
 .ad
 .RS 15n
-.rt  
 Baud rate of the tty device.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBORIG_UID\fR \fR
 .ad
 .RS 15n
-.rt  
 Real user-id of user who invoked \fBpppd\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPPPLOGNAME\fR \fR
 .ad
 .RS 15n
-.rt  
 Username of the real user-id who invoked \fBpppd\fR. This is always set.
 .RE
 
@@ -2331,46 +2151,38 @@ Username of the real user-id who invoked \fBpppd\fR. This is always set.
 scripts:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCONNECT_TIME\fR \fR
 .ad
 .RS 17n
-.rt  
 Number of seconds between the start of PPP negotiation and connection
 termination.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBBYTES_SENT\fR \fR
 .ad
 .RS 17n
-.rt  
 Number of bytes sent at the level of the serial port during the connection.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBBYTES_RCVD\fR \fR
 .ad
 .RS 17n
-.rt  
 Number of bytes received at the level of the serial port during the connection.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLINKNAME\fR \fR
 .ad
 .RS 17n
-.rt  
 Logical name of the link, set with the \fBlinkname\fR option.
 .RE
 
@@ -2380,12 +2192,10 @@ If they exist, \fBpppd\fR invokes the following scripts. It is not an error if
 they do not exist.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ppp/auth-up\fR \fR
 .ad
 .RS 23n
-.rt  
 Program or script executed after the remote system successfully authenticates
 itself. It is executed with five command-line arguments: \fBinterface-name
 peer-name user-name tty-device speed\fR. Note that this script is not executed
@@ -2395,12 +2205,10 @@ option is used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ppp/auth-down\fR \fR
 .ad
 .RS 23n
-.rt  
 Program or script executed when the link goes down if \fB/etc/ppp/auth-up\fR
 was previously executed. It is executed in the same manner with the same
 parameters as \fB/etc/ppp/auth-up\fR.
@@ -2408,12 +2216,10 @@ parameters as \fB/etc/ppp/auth-up\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ppp/ip-up\fR \fR
 .ad
 .RS 21n
-.rt  
 A program or script that is executed when the link is available for sending and
 receiving IP packets (that is, IPCP has come up). It is executed with six
 command-line arguments: \fBinterface-name tty-device speed local-IP-address
@@ -2422,12 +2228,10 @@ remote-IP-address ipparam\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ppp/ip-down\fR \fR
 .ad
 .RS 21n
-.rt  
 A program or script which is executed when the link is no longer available for
 sending and receiving IP packets. This script can be used for undoing the
 effects of the \fB/etc/ppp/ip-up\fR script. It is invoked in the same manner
@@ -2436,12 +2240,10 @@ and with the same parameters as the \fBip-up\fR script.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ppp/ipv6-up\fR \fR
 .ad
 .RS 21n
-.rt  
 Similar to \fB/etc/ppp/ip-up\fR, except that it is executed when the link is
 available for sending and receiving IPv6 packets. Executed with six
 command-line arguments: \fBinterface-name tty-device speed
@@ -2450,12 +2252,10 @@ local-link-local-address remote-link-local-address ipparam\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ppp/ipv6-down\fR \fR
 .ad
 .RS 23n
-.rt  
 Similar to \fB/etc/ppp/ip-down\fR, but executed when IPv6 packets can no longer
 be transmitted on the link. Executed with the same parameters as the ipv6-up
 script.
@@ -2491,18 +2291,18 @@ any login sequence required. The \fB/etc/ppp/chat-isp\fR file is used by
 .sp
 .in +2
 .nf
-ABORT "NO CARRIER" 
-ABORT "NO DIALTONE" 
-ABORT "ERROR" 
-ABORT "NO ANSWER" 
-ABORT "BUSY" 
-ABORT "Username/Password Incorrect" 
-"" "at" 
-OK "at&f&d2&c1" 
-OK "atdt2468135" 
-"name:" "^Umyuserid" 
-"word:" "\qmypassword" 
-"ispts" "\q^Uppp" 
+ABORT "NO CARRIER"
+ABORT "NO DIALTONE"
+ABORT "ERROR"
+ABORT "NO ANSWER"
+ABORT "BUSY"
+ABORT "Username/Password Incorrect"
+"" "at"
+OK "at&f&d2&c1"
+OK "atdt2468135"
+"name:" "^Umyuserid"
+"word:" "\qmypassword"
+"ispts" "\q^Uppp"
 "~-^Uppp-~"
 .fi
 .in -2
@@ -2542,7 +2342,7 @@ entry to the \fB/etc/ppp/pap-secrets\fR or \fB/etc/ppp/chap-secrets\fR files:
 .sp
 .in +2
 .nf
-\fBjoespc	server	"joe's secret"	joespc.my.net\fR 
+\fBjoespc	server	"joe's secret"	joespc.my.net\fR
 .fi
 .in -2
 .sp
@@ -2569,36 +2369,30 @@ The \fBpppd\fR exit status indicates errors or specifies why a link was
 terminated. Exit status values are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR \fR
 .ad
 .RS 7n
-.rt  
 \fBpppd\fR has detached or the connection was successfully established and
 terminated at the peer's request.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR \fR
 .ad
 .RS 7n
-.rt  
 An immediately fatal error occurred. For example, an essential system call
 failed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR \fR
 .ad
 .RS 7n
-.rt  
 An error was detected in the options given. For example, two mutually exclusive
 options were used, or \fB/etc/ppp/options\fR is missing and the user is not
 root.
@@ -2606,225 +2400,185 @@ root.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR \fR
 .ad
 .RS 7n
-.rt  
 \fBpppd\fR is not \fBsetuid-root\fR and the invoking user is not root.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR \fR
 .ad
 .RS 7n
-.rt  
 The kernel does not support PPP. For example, the PPP kernel driver is not
 included or cannot be loaded.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB5\fR \fR
 .ad
 .RS 7n
-.rt  
 \fBpppd\fR terminated because it was sent a SIGINT, SIGTERM or SIGHUP signal.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB6\fR \fR
 .ad
 .RS 7n
-.rt  
 The serial port could not be locked.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB7\fR \fR
 .ad
 .RS 7n
-.rt  
 The serial port could not be opened.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB8\fR \fR
 .ad
 .RS 7n
-.rt  
 The connect script failed and returned a non-zero exit status.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB9\fR \fR
 .ad
 .RS 7n
-.rt  
 The command specified as the argument to the \fBpty\fR option could not be run.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB10\fR \fR
 .ad
 .RS 7n
-.rt  
 The PPP negotiation failed because no network protocols were able to run.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB11\fR \fR
 .ad
 .RS 7n
-.rt  
 The peer system failed or refused to authenticate itself.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB12\fR \fR
 .ad
 .RS 7n
-.rt  
 The link was established successfully, but terminated because it was idle.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB13\fR \fR
 .ad
 .RS 7n
-.rt  
 The link was established successfully, but terminated because the connect time
 limit was reached.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB14\fR \fR
 .ad
 .RS 7n
-.rt  
 Callback was negotiated and an incoming call should arrive shortly.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB15\fR \fR
 .ad
 .RS 7n
-.rt  
 The link was terminated because the peer is not responding to echo requests.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB16\fR \fR
 .ad
 .RS 7n
-.rt  
 The link was terminated by the modem hanging up.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB17\fR \fR
 .ad
 .RS 7n
-.rt  
 The PPP negotiation failed because serial loopback was detected.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB18\fR \fR
 .ad
 .RS 7n
-.rt  
 The init script failed because a non-zero exit status was returned.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB19\fR \fR
 .ad
 .RS 7n
-.rt  
 Authentication to the peer failed.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/run/sppp\fIn\fR\fR\fB\&.pid\fR \fR
 .ad
 .RS 29n
-.rt  
 Process-ID for \fBpppd\fR process on PPP interface unit \fIn\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/run/ppp-\fIname\fR\fR\fB\&.pid\fR \fR
 .ad
 .RS 29n
-.rt  
 Process-ID for \fBpppd\fR process for logical link name (see the \fBlinkname\fR
 option).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ppp/pap-secrets\fR \fR
 .ad
 .RS 29n
-.rt  
 Usernames, passwords and IP addresses for PAP authentication. This file should
 be owned by root and not readable or writable by any other user, otherwise
 \fBpppd\fR will log a warning.
@@ -2832,12 +2586,10 @@ be owned by root and not readable or writable by any other user, otherwise
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ppp/chap-secrets\fR \fR
 .ad
 .RS 29n
-.rt  
 Names, secrets and IP addresses for all forms of CHAP authentication. The
 \fB/etc/ppp/pap-secrets\fR file should be owned by \fBroot\fR should not
 readable or writable by any other user, otherwise, \fBpppd\fR will log a
@@ -2846,35 +2598,29 @@ warning.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ppp/options\fR \fR
 .ad
 .RS 29n
-.rt  
 System default options for \fBpppd\fR, read before user default options or
 command-line options.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB$HOME/.ppprc\fR \fR
 .ad
 .RS 29n
-.rt  
 User default options, read before \fB/etc/ppp/options.\fIttyname\fR\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ppp/options.\fIttyname\fR\fR \fR
 .ad
 .RS 29n
-.rt  
 System default options for the serial port in use; read after
 \fB$HOME/.ppprc\fR. The \fIttyname\fR component of this filename is formed when
 the initial \fB/dev/\fR is stripped from the port name (if present), and
@@ -2883,12 +2629,10 @@ slashes (if any) are converted to dots.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ppp/peers\fR \fR
 .ad
 .RS 29n
-.rt  
 Directory with options files that may contain privileged options, even if
 \fBpppd\fR was invoked by a user other than \fBroot\fR. The system
 administrator can create options files in this directory to permit
@@ -2904,13 +2648,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
@@ -2952,23 +2695,19 @@ Simpson, W. \fIRFC 1662, HDLC-like Framing \fR. Network Working Group. July
 These signals affect \fBpppd\fR behavior:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSIGINT, SIGTERM\fR \fR
 .ad
 .RS 20n
-.rt  
 Terminate the link, restore the serial device settings and exit.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSIGHUP\fR \fR
 .ad
 .RS 20n
-.rt  
 Terminate the link, restore the serial device settings and close the serial
 device. If the \fBpersist\fR or \fBdemand\fR option is specified, \fBpppd\fR
 attempts to reopen the serial device and start another connection after the
@@ -2978,24 +2717,20 @@ period, \fBSIGHUP\fR causes \fBpppd\fR to end the holdoff period immediately.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSIGUSR1\fR \fR
 .ad
 .RS 20n
-.rt  
 Toggles the state of the \fBdebug\fR option and prints link status information
 to the log.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSIGUSR2\fR \fR
 .ad
 .RS 20n
-.rt  
 Causes \fBpppd\fR to renegotiate compression. This is useful to re-enable
 compression after it has been disabled as a result of a fatal decompression
 error. (Fatal decompression errors generally indicate a bug in an
diff --git a/usr/src/man/man1m/pppdump.1m b/usr/src/man/man1m/pppdump.1m
index 73234001de..9362560558 100644
--- a/usr/src/man/man1m/pppdump.1m
+++ b/usr/src/man/man1m/pppdump.1m
@@ -2,8 +2,7 @@
 .\" manual page for pppdump
 .\" Copyright (c) 2000 by Sun Microsystems, Inc.
 .\" All rights reserved.
-.\"	@(#) $Id: pppdump.8,v 1.1 1999/04/01 11:44:55 paulus Exp $
-.TH PPPDUMP 1M "1 April 1999"
+.TH PPPDUMP 1M "Apr 1, 1999"
 .SH NAME
 pppdump \- convert PPP record file to readable format
 .SH SYNOPSIS
@@ -21,7 +20,6 @@ pppdump \- convert PPP record file to readable format
 ] [
 .I file \fR...
 ]
-.ti 12
 .SH DESCRIPTION
 The
 .B pppdump
diff --git a/usr/src/man/man1m/pppoec.1m b/usr/src/man/man1m/pppoec.1m
index f2331122d9..3e42b17ee1 100644
--- a/usr/src/man/man1m/pppoec.1m
+++ b/usr/src/man/man1m/pppoec.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH pppoec 1M "9 Jan 2002" "SunOS 5.11" "System Administration Commands"
+.TH PPPOEC 1M "Jan 9, 2002"
 .SH NAME
 pppoec \- PPPoE chat utility
 .SH SYNOPSIS
 .LP
 .nf
-\fBpppoec\fR [\fB-o\fImillisecs\fR\fR] [\fB-s\fR\fImillisecs\fR] [\fB-v\fR] \fIdevice\fR 
+\fBpppoec\fR [\fB-o\fImillisecs\fR\fR] [\fB-s\fR\fImillisecs\fR] [\fB-v\fR] \fIdevice\fR
      [\fIservice\fR [ [except]\fIserver\fR... [only]]]
 .fi
 
@@ -56,23 +56,19 @@ is used instead. To exclude non-matching servers entirely, append the keyword
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 6n
-.rt  
 Sends out broadcast query over interface specified by \fIdevice\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 6n
-.rt  
 Sets the initial wait time in milliseconds for PADO from the server before PADI
 is retried. The default is 500 milliseconds for normal operation, or 3000
 milliseconds (3 seconds) for inquiry (\fB-i\fR) mode.
@@ -80,24 +76,20 @@ milliseconds (3 seconds) for inquiry (\fB-i\fR) mode.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 6n
-.rt  
 Sets the initial wait time in milliseconds for PADS from the server before PADR
 is retried. The default is 2000 milliseconds (2 seconds).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 Displays verbose progress messages, including all PPPoE messages sent, and all
 state machine transitions.
 .RE
@@ -112,34 +104,28 @@ You normally do not need to adjust the parameters set with \fB-o\fR and
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdevice\fR\fR
 .ad
 .RS 11n
-.rt  
 plumbed Ethernet interface
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIserver\fR\fR
 .ad
 .RS 11n
-.rt  
 preferred server or, if you specify \fBonly\fR, the specified server
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIservice\fR\fR
 .ad
 .RS 11n
-.rt  
 desired service; other available services are ignored
 .RE
 
@@ -220,57 +206,47 @@ because the filters are first-match.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR \fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/inet/pppoec\fR \fR
 .ad
 .RS 27n
-.rt  
 executable command
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/sppptun\fR\fR
 .ad
 .RS 27n
-.rt  
 Solaris PPP tunneling device driver.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ppp/connect-errors\fR\fR
 .ad
 .RS 27n
-.rt  
 usual location of error output (see DIAGNOSTICS, below)
 .RE
 
diff --git a/usr/src/man/man1m/pppoed.1m b/usr/src/man/man1m/pppoed.1m
index be828dcc09..36a8b83d7a 100644
--- a/usr/src/man/man1m/pppoed.1m
+++ b/usr/src/man/man1m/pppoed.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH pppoed 1M "6 Jan 2003" "SunOS 5.11" "System Administration Commands"
+.TH PPPOED 1M "Jan 6, 2003"
 .SH NAME
 pppoed \- PPPoE server daemon
 .SH SYNOPSIS
@@ -60,7 +60,6 @@ files has no effect on this.
 The \fBpppoed\fR daemon supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBclient\fR [\fBexcept\fR] \fIclient-list\fR\fR
 .ad
@@ -94,7 +93,6 @@ manufacturer assigned block \fB40:0:1a\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdebug\fR\fR
 .ad
@@ -111,7 +109,6 @@ When specified on the command line or in the global context of the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdevice\fR \fIdevice-list\fR\fR
 .ad
@@ -125,7 +122,6 @@ per-device \fB/etc/ppp/pppoe.\fIdevice\fR\fR files.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBextra\fR \fIstring\fR\fR
 .ad
@@ -137,7 +133,6 @@ directtty\fR" and usually does not need to be overridden.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfile\fR \fIpath\fR\fR
 .ad
@@ -159,7 +154,6 @@ by specifying \fBfile /dev/null\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgroup\fR \fIname\fR\fR
 .ad
@@ -171,7 +165,6 @@ executed. If \fBpppoed\fR is not run as root, this option is ignored.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlog\fR \fIpath\fR\fR
 .ad
@@ -186,7 +179,6 @@ daemon's default (non-service-related) log file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnodebug\fR\fR
 .ad
@@ -199,7 +191,6 @@ also sets the daemon's default (non-service-related) detail level.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnowildcard\fR\fR
 .ad
@@ -214,7 +205,6 @@ wildcard service requests.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpath\fR \fIpath\fR\fR
 .ad
@@ -226,7 +216,6 @@ Specifies the path to the \fBpppd\fR executable. Defaults to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpppd\fR \fIstring\fR\fR
 .ad
@@ -239,7 +228,6 @@ string.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBserver\fR \fIstring\fR\fR
 .ad
@@ -251,7 +239,6 @@ defaults to "Solaris PPPoE".
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBservice\fR \fIname\fR\fR
 .ad
@@ -265,7 +252,6 @@ during parsing overrides all previous definitions.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBuser\fR \fIname\fR\fR
 .ad
@@ -277,7 +263,6 @@ If \fBpppoed\fR is not run as root, this option is ignored.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwildcard\fR\fR
 .ad
@@ -334,24 +319,20 @@ interface \fBeri0\fR, and offering only service "debugging" on interface
 The \fBpppoed\fR daemon responds to the following signals:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSIGHUP\fR\fR
 .ad
 .RS 10n
-.rt  
 Causes \fBpppoed\fR to reparse the original command line and all configuration
 files, and close and reopen any log files.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSIGINT\fR\fR
 .ad
 .RS 10n
-.rt  
 Causes a snapshot of the state of the \fBpppoed\fR daemon to be written to
 \fB/tmp/pppoed.\fIpid\fR\fR (where \fIpid\fR is the decimal process ID of the
 daemon).
@@ -360,78 +341,64 @@ daemon).
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/inet/pppoed\fR \fR
 .ad
 .RS 25n
-.rt  
 executable command
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/sppptun\fR\fR
 .ad
 .RS 25n
-.rt  
 Solaris PPP tunneling device driver
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ppp/pppoe\fR\fR
 .ad
 .RS 25n
-.rt  
 main configuration option file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ppp/pppoe.\fIdevice\fR\fR\fR
 .ad
 .RS 25n
-.rt  
 per-device configuration option file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ppp/pppoe-errors\fR\fR
 .ad
 .RS 25n
-.rt  
 location of output from \fBpppd\fR's stderr
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ppp/pppoe.if\fR\fR
 .ad
 .RS 25n
-.rt  
 list of Ethernet interfaces to be plumbed at boot time
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/tmp/pppoed.\fIpid\fR\fR\fR
 .ad
 .RS 25n
-.rt  
 ASCII text file containing dumped \fBpppoed\fR state information
 .RE
 
diff --git a/usr/src/man/man1m/pppstats.1m b/usr/src/man/man1m/pppstats.1m
index 38e3f7b549..649d22e7c9 100644
--- a/usr/src/man/man1m/pppstats.1m
+++ b/usr/src/man/man1m/pppstats.1m
@@ -3,13 +3,13 @@
 .\" Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by the University of California, Berkeley.  The name of the University may not be used to endorse or promote products derived from this software without specific prior written permission.  THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
 .\" WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 .\" Portions Copyright (c) 2008, Sun Microsystems, Inc. All Rights Reserved.
-.TH pppstats 1M "4 May 2001" "SunOS 5.11" "System Administration Commands"
+.TH PPPSTATS 1M "May 4, 2001"
 .SH NAME
 pppstats \- print PPP statistics
 .SH SYNOPSIS
 .LP
 .nf
-\fBpppstats\fR [\fB-a\fR] [\fB-v\fR] [\fB-r\fR] [\fB-z\fR] [\fB-c\fR \fI<count>\fR] [\fB-w\fR \fI<secs>\fR] 
+\fBpppstats\fR [\fB-a\fR] [\fB-v\fR] [\fB-r\fR] [\fB-z\fR] [\fB-c\fR \fI<count>\fR] [\fB-w\fR \fI<secs>\fR]
      [\fIinterface\fR]
 .fi
 
@@ -27,12 +27,10 @@ properties and volume of packets received and transmitted by the interface.
 The \fBpppstats\fR options are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fR
 .ad
 .RS 13n
-.rt  
 Display absolute values rather than deltas. With this option, all reports show
 statistics for the time elapsed since the link was initiated. Without this
 option, the second and subsequent reports show statistics for the time since
@@ -41,12 +39,10 @@ the last report.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fB\fIcount\fR\fR \fR
 .ad
 .RS 13n
-.rt  
 Repeat the display \fIcount\fR times. If this option is not specified, the
 default repeat count is 1 if the \fB-w\fR option is not specified, otherwise
 infinity.
@@ -54,48 +50,40 @@ infinity.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fR
 .ad
 .RS 13n
-.rt  
 Display additional statistics summarizing the compression ratio achieved by the
 packet compression algorithm in use.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR \fR
 .ad
 .RS 13n
-.rt  
 Display additional statistics relating to the performance of the Van Jacobson
 TCP header compression algorithm.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR \fB\fIwait\fR\fR \fR
 .ad
 .RS 13n
-.rt  
 Pause  \fIwait\fR seconds between each display. If this option is not
 specified, the default interval is five seconds.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-z\fR \fR
 .ad
 .RS 13n
-.rt  
 Instead of the standard display, show statistics indicating the performance of
 the packet compression algorithm in use.
 .RE
@@ -107,69 +95,57 @@ The following fields are printed on the input side when the \fB-z\fR option is
 not used:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBIN\fR \fR
 .ad
 .RS 11n
-.rt  
 Total number of bytes received by this interface.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPACK\fR \fR
 .ad
 .RS 11n
-.rt  
 Total number of packets received by this interface.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBVJCOMP\fR \fR
 .ad
 .RS 11n
-.rt  
 Number of header-compressed TCP packets received by this interface.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBVJUNC\fR \fR
 .ad
 .RS 11n
-.rt  
 Number of header-uncompressed TCP packets received by this interface. Not
 reported when the \fB-r\fR option is specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBVJERR\fR \fR
 .ad
 .RS 11n
-.rt  
 Number of corrupted or bogus header-compressed TCP packets received by this
 interface. Not reported when the \fB-r\fR option is specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBVJTOSS\fR \fR
 .ad
 .RS 11n
-.rt  
 Number of VJ header-compressed TCP packets dropped on reception by this
 interface because of preceding errors. Only reported when the \fB-v\fR option
 is specified.
@@ -177,24 +153,20 @@ is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNON-VJ\fR \fR
 .ad
 .RS 11n
-.rt  
 Total number of non-TCP packets received by this interface. Only reported when
 the \fB-v\fR option is specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRATIO\fR \fR
 .ad
 .RS 11n
-.rt  
 Compression ratio achieved for received packets by the packet compression
 scheme in use, defined as the uncompressed size divided by the compressed size.
 Only reported when the \fB-r\fR option is specified.
@@ -202,12 +174,10 @@ Only reported when the \fB-r\fR option is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBUBYTE\fR \fR
 .ad
 .RS 11n
-.rt  
 Total number of bytes received, after decompression of compressed packets. Only
 reported when the \fB-r\fR option is specified.
 .RE
@@ -217,94 +187,78 @@ reported when the \fB-r\fR option is specified.
 The following fields are printed on the output side:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBOUT\fR\fR
 .ad
 .RS 10n
-.rt  
 Total number of bytes transmitted from this interface.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPACK\fR\fR
 .ad
 .RS 10n
-.rt  
 Total number of packets transmitted from this interface.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBVJCOMP\fR\fR
 .ad
 .RS 10n
-.rt  
 Number of TCP packets transmitted from this interface with VJ-compressed TCP
 headers.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBVJUNC\fR\fR
 .ad
 .RS 10n
-.rt  
 Number of TCP packets transmitted from this interface with VJ-uncompressed TCP
 headers. Not reported when the \fB-r\fR option is specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNON-VJ\fR\fR
 .ad
 .RS 10n
-.rt  
 Total number of non-TCP packets transmitted from this interface. Not reported
 when the \fB-r\fR option is specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBVJSRCH\fR\fR
 .ad
 .RS 10n
-.rt  
 Number of searches for the cached header entry for a VJ header compressed TCP
 packet. Only reported when the \fB-v\fR option is specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBVJMISS\fR\fR
 .ad
 .RS 10n
-.rt  
 Number of failed searches for the cached header entry for a VJ header
 compressed TCP packet. Only reported when the \fB-v\fR option is specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRATIO\fR\fR
 .ad
 .RS 10n
-.rt  
 Compression ratio achieved for transmitted packets by the packet compression
 scheme in use, defined as the size before compression divided by the compressed
 size. Only reported when the \fB-r\fR option is specified.
@@ -312,12 +266,10 @@ size. Only reported when the \fB-r\fR option is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBUBYTE\fR\fR
 .ad
 .RS 10n
-.rt  
 Total number of bytes to be transmitted before packet compression is applied.
 Only reported when the \fB-r\fR option is specified.
 .RE
@@ -330,57 +282,47 @@ compression is not in use, these fields display zeroes. The fields displayed on
 the input side are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCOMPRESSED BYTE\fR\fR
 .ad
 .RS 23n
-.rt  
 Number of bytes of compressed packets received.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCOMPRESSED PACK\fR\fR
 .ad
 .RS 23n
-.rt  
 Number of compressed packets received.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBINCOMPRESSIBLE BYTE\fR\fR
 .ad
 .RS 23n
-.rt  
 Number of bytes of incompressible packets (that is, those which were
 transmitted in uncompressed form) received.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBINCOMPRESSIBLE PACK\fR\fR
 .ad
 .RS 23n
-.rt  
 Number of incompressible packets received.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCOMP RATIO\fR\fR
 .ad
 .RS 23n
-.rt  
 Recent compression ratio for incoming packets, defined as the uncompressed size
 divided by the compressed size (including both compressible and incompressible
 packets).
@@ -391,57 +333,47 @@ packets).
 The fields displayed on the output side are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCOMPRESSED BYTE\fR\fR
 .ad
 .RS 23n
-.rt  
 Number of bytes of compressed packets transmitted.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCOMPRESSED PACK\fR\fR
 .ad
 .RS 23n
-.rt  
 Number of compressed packets transmitted.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBINCOMPRESSIBLE BYTE\fR\fR
 .ad
 .RS 23n
-.rt  
 Number of bytes of incompressible packets received; that is, those that were
 transmitted by the peer in uncompressed form.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBINCOMPRESSIBLE PACK\fR\fR
 .ad
 .RS 23n
-.rt  
 Number of incompressible packets transmitted.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCOMP RATIO\fR\fR
 .ad
 .RS 23n
-.rt  
 Recent compression ratio for outgoing packets.
 .RE
 
@@ -453,13 +385,12 @@ See \fBattributes\fR(5)  for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/praudit.1m b/usr/src/man/man1m/praudit.1m
index fd2e598bda..84070e673c 100644
--- a/usr/src/man/man1m/praudit.1m
+++ b/usr/src/man/man1m/praudit.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH praudit 1M "26 Jul 2009" "SunOS 5.11" "System Administration Commands"
+.TH PRAUDIT 1M "Jul 26, 2009"
 .SH NAME
 praudit \- print contents of an audit trail file
 .SH SYNOPSIS
@@ -28,7 +28,6 @@ line.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fIdel\fR\fR
 .ad
@@ -42,7 +41,6 @@ meaningful and is not used when the \fB-x\fR option is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
@@ -53,7 +51,6 @@ Print one line per record.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -67,7 +64,6 @@ exclusive. If both are used, a format usage error message is output.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
@@ -83,7 +79,6 @@ If both are used, a format usage error message is output.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
@@ -97,7 +92,6 @@ identification of the DTD which can be used to parse the XML.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/audit_event\fR\fR
 .ad
@@ -108,7 +102,6 @@ Audit event definition and class mappings.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/audit_class\fR\fR
 .ad
@@ -119,7 +112,6 @@ Audit class definitions.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/share/lib/xml/dtd\fR\fR
 .ad
@@ -131,7 +123,6 @@ example, \fBadt_record.dtd.1\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/share/lib/xml/style\fR\fR
 .ad
@@ -149,13 +140,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below
+Interface Stability	See below
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/print-service.1m b/usr/src/man/man1m/print-service.1m
index 9c098b6d42..681a611101 100644
--- a/usr/src/man/man1m/print-service.1m
+++ b/usr/src/man/man1m/print-service.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH print-service 1M "18 Mar 2008" "SunOS 5.11" "System Administration Commands"
+.TH PRINT-SERVICE 1M "Mar 18, 2008"
 .SH NAME
 print-service \- select, report, import, export active print service on a
 system
@@ -28,7 +28,6 @@ the active print service or import print queue configuration.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIservice\fR\fR
 .ad
@@ -40,7 +39,6 @@ Select the active print service for on a host. \fIservice\fR can be one of
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
@@ -51,7 +49,6 @@ Migrate print queue configuration during print service selection.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
@@ -62,7 +59,6 @@ Report the active print service on a host.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIfile\fR\fR
 .ad
@@ -73,7 +69,6 @@ Export basic print queue configuration to a file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIfile\fR\fR
 .ad
@@ -145,7 +140,6 @@ service.
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -156,7 +150,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnon-zero\fR\fR
 .ad
@@ -173,13 +166,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityObsolete
+Interface Stability	Obsolete
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/printmgr.1m b/usr/src/man/man1m/printmgr.1m
index 9494c7fbb0..3eafb7cc89 100644
--- a/usr/src/man/man1m/printmgr.1m
+++ b/usr/src/man/man1m/printmgr.1m
@@ -3,14 +3,14 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH printmgr 1M "23 May 2003" "SunOS 5.11" "System Administration Commands"
+.TH PRINTMGR 1M "May 23, 2003"
 .SH NAME
 printmgr \- Solaris Print Manager is a graphical user interface for managing
 printers in a network
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sadm/admin/bin/printmgr\fR 
+\fB/usr/sadm/admin/bin/printmgr\fR
 .fi
 
 .SH DESCRIPTION
@@ -51,70 +51,58 @@ Help is available by clicking the Help button.
 Solaris Print Manager enables you to do the following tasks:
 .sp
 .ne 2
-.mk
 .na
 \fBSelect a Name Service\fR
 .ad
 .RS 29n
-.rt  
 Select a name service for retrieving or changing printer information.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBAdd Access to a Printer\fR
 .ad
 .RS 29n
-.rt  
 Add printer access on a printer client using Solaris Print Manager.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBAdd an Attached Printer\fR
 .ad
 .RS 29n
-.rt  
 After physically attaching the printer to a system, use Solaris Print Manager
 to install a local printer and make it available for printing.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBAdd a Network Printer\fR
 .ad
 .RS 29n
-.rt  
 After physically attaching the printer to a system, use Solaris Print Manager
 to install a local printer and make it available for printing.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBModify Printer Properties\fR
 .ad
 .RS 29n
-.rt  
 After adding access to a printer or adding an attached or network printer, you
 can modify certain printer attributes.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBDelete a Printer\fR
 .ad
 .RS 29n
-.rt  
 Delete access to a printer from the print client or delete a printer from the
 print server or from the name service environment.
 .RE
diff --git a/usr/src/man/man1m/projadd.1m b/usr/src/man/man1m/projadd.1m
index ca83f456fe..7a92c237d4 100644
--- a/usr/src/man/man1m/projadd.1m
+++ b/usr/src/man/man1m/projadd.1m
@@ -3,14 +3,14 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH projadd 1M "30 Sep 2004" "SunOS 5.11" "System Administration Commands"
+.TH PROJADD 1M "Sep 30, 2004"
 .SH NAME
 projadd \- administer a new project on the system
 .SH SYNOPSIS
 .LP
 .nf
-\fBprojadd\fR [\fB-n\fR] [\fB-f\fR \fIfilename\fR] [\fB-p\fR \fIprojid\fR [\fB-o\fR]] [\fB-c\fR \fIcomment\fR] 
-     [\fB-U\fR \fIuser\fR [,\fIuser\fR]... ] [\fB-G\fR \fIgroup\fR [,\fIgroup\fR]... ] 
+\fBprojadd\fR [\fB-n\fR] [\fB-f\fR \fIfilename\fR] [\fB-p\fR \fIprojid\fR [\fB-o\fR]] [\fB-c\fR \fIcomment\fR]
+     [\fB-U\fR \fIuser\fR [,\fIuser\fR]... ] [\fB-G\fR \fIgroup\fR [,\fIgroup\fR]... ]
      [ [\fB-K\fR \fIname\fR [=\fIvalue\fR [,\fIvalue\fR]...]...]] \fIproject\fR
 .fi
 
@@ -26,12 +26,10 @@ available for use immediately upon the completion of the \fBprojadd\fR command.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcomment\fR\fR
 .ad
 .RS 29n
-.rt  
 Add a project comment. Comments are stored in the project's entry in the
 \fB/etc/project\fR file. Generally, comments contain a short description of the
 project and are used as the field for the project's full name.
@@ -42,35 +40,29 @@ Specify \fIcomment\fR as a text string. \fIcomment\fR cannot contain a colon
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfilename\fR\fR
 .ad
 .RS 29n
-.rt  
 Specify the project file to modify. If no \fIfilename\fR is specified, the
 system project file, \fB/etc/project\fR, is modified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-G\fR \fIgroup\fR[,group...]\fR
 .ad
 .RS 29n
-.rt  
 Specify a group list for the project.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-K\fR \fIname\fR[=\fIvalue\fR[,\fIvalue\fR...]\fR
 .ad
 .RS 29n
-.rt  
 Specify an attribute list for the project. Multiple \fB-K\fR options can be
 specified to set values on multiple keys, such as:
 .sp
@@ -89,12 +81,10 @@ for a description of the resource controls you can specify for a project.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 29n
-.rt  
 Syntax check. Check the format of the existing system project file and
 modifications only. The contents of the existing project file, such as user
 names, group names, and resources that are specified in the project attributes
@@ -103,24 +93,20 @@ are not checked.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 29n
-.rt  
 This option allows the project ID specified by the \fB-p\fR option to be
 non-unique within the project file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIprojid\fR\fR
 .ad
 .RS 29n
-.rt  
 Set the project \fBID\fR of the new project.
 .sp
 Specify \fIprojid\fR as a non-negative decimal integer below \fBUID_MAX\fR as
@@ -133,12 +119,10 @@ reserved by SunOS.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-U\fR \fIuser\fR[,user...]\fR
 .ad
 .RS 29n
-.rt  
 Specify a user list for the project.
 .RE
 
@@ -148,12 +132,10 @@ Specify a user list for the project.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIproject\fR\fR
 .ad
 .RS 11n
-.rt  
 The name of the project to create. The \fIproject\fR operand is a string
 consisting of characters from the set of alphabetic characters, numeric
 characters, underline (_), and hyphen (-). The period ('.') is reserved for
@@ -211,101 +193,83 @@ MB, and scaling factors are specified in \fBresource_controls\fR(5).
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 6n
-.rt  
 The command syntax was invalid. A usage message for \fBprojadd\fR is displayed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 6n
-.rt  
 An invalid argument was provided to an option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR\fR
 .ad
 .RS 6n
-.rt  
 The \fIprojid\fR given with the \fB-p\fR option is already in use.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB5\fR\fR
 .ad
 .RS 6n
-.rt  
 The project files contain an error. See \fBproject\fR(4).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB6\fR\fR
 .ad
 .RS 6n
-.rt  
 The project to be added, group, user, or resource does not exist.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB9\fR\fR
 .ad
 .RS 6n
-.rt  
 The project is already in use.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB10\fR\fR
 .ad
 .RS 6n
-.rt  
 Cannot update the \fB/etc/project\fR file.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/project\fR\fR
 .ad
 .RS 16n
-.rt  
 System project file
 .RE
 
@@ -317,13 +281,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(5.5i) |cw(0i) 
-lw(5.5i) |lw(0i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/projdel.1m b/usr/src/man/man1m/projdel.1m
index a3d1071e12..ba7674ea9b 100644
--- a/usr/src/man/man1m/projdel.1m
+++ b/usr/src/man/man1m/projdel.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH projdel 1M "4 May 2004" "SunOS 5.11" "System Administration Commands"
+.TH PROJDEL 1M "May 4, 2004"
 .SH NAME
 projdel \- delete a project from the system
 .SH SYNOPSIS
@@ -24,12 +24,10 @@ appropriate changes to the system file.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfilename\fR\fR
 .ad
 .RS 15n
-.rt  
 Specify the project file to modify. If no \fIfilename\fR is specified, the
 system project file, \fB/etc/project\fR, is modified.
 .RE
@@ -40,12 +38,10 @@ system project file, \fB/etc/project\fR, is modified.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIproject\fR\fR
 .ad
 .RS 11n
-.rt  
 The name of the project to be deleted.
 .RE
 
@@ -55,112 +51,92 @@ The name of the project to be deleted.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 6n
-.rt  
 The command syntax was invalid. A usage message for \fBprojdel\fR is displayed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 6n
-.rt  
 An invalid argument was provided to an option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR\fR
 .ad
 .RS 6n
-.rt  
 The \fIprojid\fR given with the \fB-p\fR option is already in use.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB5\fR\fR
 .ad
 .RS 6n
-.rt  
 The project files contain an error. See \fBproject\fR(4).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB6\fR\fR
 .ad
 .RS 6n
-.rt  
 The project to be modified, group, user, or resource does not exist.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB9\fR\fR
 .ad
 .RS 6n
-.rt  
 The project is already in use.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB10\fR\fR
 .ad
 .RS 6n
-.rt  
 Cannot update the \fB/etc/project\fR file.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/project\fR\fR
 .ad
 .RS 16n
-.rt  
 System project file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fR
 .ad
 .RS 16n
-.rt  
 
 .RE
 
@@ -172,13 +148,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface stabilty		See below.
+Interface stabilty	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/projmod.1m b/usr/src/man/man1m/projmod.1m
index 17d0e007a1..81a6e13a15 100644
--- a/usr/src/man/man1m/projmod.1m
+++ b/usr/src/man/man1m/projmod.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH projmod 1M "22 Feb 2007" "SunOS 5.11" "System Administration Commands"
+.TH PROJMOD 1M "Feb 22, 2007"
 .SH NAME
 projmod \- modify a project's information on the system
 .SH SYNOPSIS
@@ -14,10 +14,10 @@ projmod \- modify a project's information on the system
 
 .LP
 .nf
-\fBprojmod\fR [\fB-n\fR] [\fB-A\fR|\fB-f\fR \fIfilename\fR | -] [\fB-p\fR \fIprojid\fR [\fB-o\fR]] 
-     [\fB-c\fR \fIcomment\fR] [\fB-a\fR|\fB-s\fR|\fB-r\fR] [\fB-U\fR \fIuser\fR [,\fIuser\fR]... ] 
-     [\fB-G\fR \fIgroup\fR [,\fIgroup\fR]... ] 
-     [ [\fB-K\fR \fIname\fR [=\fIvalue\fR [,\fIvalue\fR]...]...]] 
+\fBprojmod\fR [\fB-n\fR] [\fB-A\fR|\fB-f\fR \fIfilename\fR | -] [\fB-p\fR \fIprojid\fR [\fB-o\fR]]
+     [\fB-c\fR \fIcomment\fR] [\fB-a\fR|\fB-s\fR|\fB-r\fR] [\fB-U\fR \fIuser\fR [,\fIuser\fR]... ]
+     [\fB-G\fR \fIgroup\fR [,\fIgroup\fR]... ]
+     [ [\fB-K\fR \fIname\fR [=\fIvalue\fR [,\fIvalue\fR]...]...]]
      [\fB-l\fR \fInew_projectname\fR] \fIproject\fR
 .fi
 
@@ -33,24 +33,20 @@ appropriate project-related system file and file system changes.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR\fR
 .ad
 .RS 29n
-.rt  
 Apply the project's resource controls, as defined in the system's project
 database, to the project if it is active.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 29n
-.rt  
 Specify that the users, groups, attributes, or attribute values specified by
 the \fB-U\fR, \fB-G\fR or \fB-K\fR options should be added to the project,
 rather than replacing the existing member or attribute list.
@@ -58,12 +54,10 @@ rather than replacing the existing member or attribute list.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcomment\fR\fR
 .ad
 .RS 29n
-.rt  
 Specify \fIcomment\fR as a text string. Generally, \fIcomment\fR contains a
 short description of the project. This information is stored in the project's
 \fB/etc/project\fR entry.
@@ -71,12 +65,10 @@ short description of the project. This information is stored in the project's
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfilename\fR | -\fR
 .ad
 .RS 29n
-.rt  
 Specify the project file to modify or validate or specify input from stdin for
 validation. As noted under OPERANDS, if you do not specify a project in a
 \fBprojmod\fR command line, \fBprojmod\fR validates the argument to \fB-f\fR.
@@ -86,12 +78,10 @@ modified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-G\fR \fIgroup\fR [,\fIgroup\fR...]\fR
 .ad
 .RS 29n
-.rt  
 Specify a replacement list of member groups of the project. When used in
 conjunction with the \fB-a\fR or \fB-r\fR options, this option specifies a list
 of groups to be added or removed from the project.
@@ -99,12 +89,10 @@ of groups to be added or removed from the project.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-K\fR \fIname\fR[=\fIvalue\fR[,\fIvalue\fR...]\fR
 .ad
 .RS 29n
-.rt  
 Specify a replacement list of project attributes for the project. When used in
 conjunction with the \fB-a\fR, \fB-r\fR, or \fB-s\fR options, this option
 specifies a list of attribute values to be added, removed, or replaced in the
@@ -127,12 +115,10 @@ for a description of the resource controls you can specify for a project.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fInew_projectname\fR\fR
 .ad
 .RS 29n
-.rt  
 Specify the new project name for the project. The \fInew_projectname\fR
 argument is a string consisting of characters from the set of alphabetic
 characters, numeric characters, period (\fB\&.\fR), underline (\fB_\fR), and
@@ -143,12 +129,10 @@ within the project file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 29n
-.rt  
 Syntax check. Check the format of the existing system project file and
 modifications only. The contents of the existing project file, such as user
 names, group names, and resources that are specified in the project attributes
@@ -157,24 +141,20 @@ are not checked.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 29n
-.rt  
 This option allows the project ID specified by the \fB-p\fR option to be
 non-unique within the project file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIprojid\fR\fR
 .ad
 .RS 29n
-.rt  
 Specify a new project \fBID\fR for the project. It must be a non-negative
 decimal integer less than \fBMAXUID\fR as defined in \fBparam.h\fR. This value
 must be unique within the project file if the \fB-o\fR option is not specified.
@@ -182,12 +162,10 @@ must be unique within the project file if the \fB-o\fR option is not specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 29n
-.rt  
 Specify that the users, groups, attributes, or attribute values specified by
 the \fB-U\fR, \fB-G\fR or \fB-K\fR options should be removed from the project,
 rather than replacing the existing member or attribute list.
@@ -195,12 +173,10 @@ rather than replacing the existing member or attribute list.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 29n
-.rt  
 Specify that the list of attributes specified by the \fB-K\fR option should
 have their values replaced. If the attributes do not exist, they are added as
 if the a option was used. This option has no effect the \fB-U\fR or \fB-G\fR
@@ -209,12 +185,10 @@ options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-U\fR \fIuser\fR [,\fIuser\fR...]\fR
 .ad
 .RS 29n
-.rt  
 Specify a replacement list of member users of the project. When used in
 conjunction with the \fB-a\fR or \fB-r\fR options, this option specifies a list
 of users to be added or removed from the project.
@@ -226,23 +200,19 @@ of users to be added or removed from the project.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIproject\fR\fR
 .ad
 .RS 11n
-.rt  
 An existing project name to be modified or displayed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fI(none)\fR\fR
 .ad
 .RS 11n
-.rt  
 If no operand is given, the project file is validated without modifying any
 project.
 .RE
@@ -289,7 +259,7 @@ entry:
 .sp
 .in +2
 .nf
-# projmod -a -K "task.max-lwps=(priv,100,deny)" salesaudit 
+# projmod -a -K "task.max-lwps=(priv,100,deny)" salesaudit
 .fi
 .in -2
 
@@ -327,7 +297,7 @@ the command for the action clauses in the preceding entry:
 .sp
 .in +2
 .nf
-# projmod -s -K "task.max-lwps=(priv,500,signal=SIGSTOP)" salesaudit 
+# projmod -s -K "task.max-lwps=(priv,500,signal=SIGSTOP)" salesaudit
 .fi
 .in -2
 
@@ -364,7 +334,7 @@ preceding entry:
 .sp
 .in +2
 .nf
-# projmod -r -K "task.max-lwps=(priv,100,deny)" salesaudit 
+# projmod -r -K "task.max-lwps=(priv,100,deny)" salesaudit
 .fi
 .in -2
 
@@ -403,7 +373,7 @@ The following \fBprojmod\fR command adds these resource controls for
 .in +2
 .nf
 # projmod -a -K "task.max-lwps=(priv,100,deny)" \e
--K "process.max-file-size=(priv,50MB,deny)" salesaudit 
+-K "process.max-file-size=(priv,50MB,deny)" salesaudit
 .fi
 .in -2
 
@@ -486,134 +456,110 @@ of the following values:
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 6n
-.rt  
 The command syntax was invalid. A usage message for \fBprojmod\fR is displayed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 6n
-.rt  
 An invalid argument was provided to an option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR\fR
 .ad
 .RS 6n
-.rt  
 The \fIprojid\fR given with the \fB-p\fR option is already in use.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB5\fR\fR
 .ad
 .RS 6n
-.rt  
 The project files contain an error. See \fBproject\fR(4).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB6\fR\fR
 .ad
 .RS 6n
-.rt  
 The project to be modified, group, user, or resource does not exist.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB9\fR\fR
 .ad
 .RS 6n
-.rt  
 The project is already in use.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB10\fR\fR
 .ad
 .RS 6n
-.rt  
 Cannot update the \fB/etc/project\fR file.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/group\fR\fR
 .ad
 .RS 16n
-.rt  
 System file containing group definitions
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/project\fR\fR
 .ad
 .RS 16n
-.rt  
 System project file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/passwd\fR\fR
 .ad
 .RS 16n
-.rt  
 System password file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/shadow\fR\fR
 .ad
 .RS 16n
-.rt  
 System file containing users' encrypted passwords and related information
 .RE
 
@@ -625,13 +571,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(5.5i) |cw(0i) 
-lw(5.5i) |lw(0i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/prstat.1m b/usr/src/man/man1m/prstat.1m
index f32488ce2a..b70124b9b8 100644
--- a/usr/src/man/man1m/prstat.1m
+++ b/usr/src/man/man1m/prstat.1m
@@ -3,16 +3,16 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH prstat 1M "25 Jun 2009" "SunOS 5.11" "System Administration Commands"
+.TH PRSTAT 1M "Jun 25, 2009"
 .SH NAME
 prstat \- report active process statistics
 .SH SYNOPSIS
 .LP
 .nf
-\fBprstat\fR [\fB-acHJLmRrtTv\fR] [\fB-d\fR u | d] [\fB-C\fR \fIpsrsetlist\fR] [\fB-h\fR \fIlgrplist\fR] 
-     [\fB-j\fR \fIprojlist\fR] [\fB-k\fR \fItasklist\fR] [\fB-n\fR \fIntop\fR[,\fInbottom\fR]] 
-     [\fB-p\fR \fIpidlist\fR] [\fB-P\fR \fIcpulist\fR] [\fB-s\fR \fIkey\fR | \fB-S\fR \fIkey\fR ] 
-     [\fB-u\fR \fIeuidlist\fR] [\fB-U\fR \fIuidlist\fR] [\fB-z\fR \fIzoneidlist\fR] [\fB-Z\fR] 
+\fBprstat\fR [\fB-acHJLmRrtTv\fR] [\fB-d\fR u | d] [\fB-C\fR \fIpsrsetlist\fR] [\fB-h\fR \fIlgrplist\fR]
+     [\fB-j\fR \fIprojlist\fR] [\fB-k\fR \fItasklist\fR] [\fB-n\fR \fIntop\fR[,\fInbottom\fR]]
+     [\fB-p\fR \fIpidlist\fR] [\fB-P\fR \fIcpulist\fR] [\fB-s\fR \fIkey\fR | \fB-S\fR \fIkey\fR ]
+     [\fB-u\fR \fIeuidlist\fR] [\fB-U\fR \fIuidlist\fR] [\fB-z\fR \fIzoneidlist\fR] [\fB-Z\fR]
      [\fIinterval\fR [\fIcount\fR]]
 .fi
 
@@ -39,7 +39,6 @@ reports statistics sorted by \fBCPU\fR usage.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -51,7 +50,6 @@ displays separate reports about processes and users at the same time.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
@@ -62,7 +60,6 @@ Print new reports below previous reports instead of overprinting them.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR \fIpsrsetlist\fR\fR
 .ad
@@ -78,7 +75,6 @@ when the \fB-L\fR option is not used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fBu | d\fR\fR
 .ad
@@ -91,7 +87,6 @@ time. See \fBtime\fR(2). Specify \fBd\fR for standard date format. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIlgrplist\fR\fR
 .ad
@@ -103,7 +98,6 @@ Report only processes or lwps whose home \fIlgroup\fR is in the given list of
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-H\fR\fR
 .ad
@@ -115,7 +109,6 @@ extra column showing process or lwps home \fIlgroup\fR with the header LGRP.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-j\fR \fIprojlist\fR\fR
 .ad
@@ -128,7 +121,6 @@ project \fBID\fR. See \fBproject\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-J\fR\fR
 .ad
@@ -140,7 +132,6 @@ displays separate reports about processes and projects at the same time.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR \fItasklist\fR\fR
 .ad
@@ -151,7 +142,6 @@ Report only processes or lwps whose task \fBID\fR is in \fItasklist\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR\fR
 .ad
@@ -163,7 +153,6 @@ Report statistics for each light-weight process (\fBLWP\fR). By default,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
@@ -177,7 +166,6 @@ waiting for user locks and waiting for \fBCPU\fR (latency time).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fIntop\fR[\fI,nbottom\fR]\fR
 .ad
@@ -195,7 +183,6 @@ output to a file, the default values for \fBntop\fR and \fBnbottom\fR are
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIpidlist\fR\fR
 .ad
@@ -206,7 +193,6 @@ Report only processes whose process \fBID\fR is in the given list.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIcpulist\fR\fR
 .ad
@@ -219,7 +205,6 @@ reported by \fBpsrinfo\fR(1M).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR\fR
 .ad
@@ -232,7 +217,6 @@ This option is available only for superuser.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -244,7 +228,6 @@ apply to lookups for the \fB-j\fR, \fB-u\fR, or \fB-U\fR options.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIkey\fR\fR
 .ad
@@ -256,7 +239,6 @@ descending order. Only one \fIkey\fR can be used as an argument.
 There are five possible key values:
 .sp
 .ne 2
-.mk
 .na
 \fBcpu\fR
 .ad
@@ -267,7 +249,6 @@ Sort by process \fBCPU\fR usage. This is the default.
 
 .sp
 .ne 2
-.mk
 .na
 \fBpri\fR
 .ad
@@ -278,7 +259,6 @@ Sort by process priority.
 
 .sp
 .ne 2
-.mk
 .na
 \fBrss\fR
 .ad
@@ -289,7 +269,6 @@ Sort by resident set size.
 
 .sp
 .ne 2
-.mk
 .na
 \fBsize\fR
 .ad
@@ -300,7 +279,6 @@ Sort by size of process image.
 
 .sp
 .ne 2
-.mk
 .na
 \fBtime\fR
 .ad
@@ -313,7 +291,6 @@ Sort by process execution time.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR \fIkey\fR\fR
 .ad
@@ -325,7 +302,6 @@ are the same as for the \fB-s\fR option. See \fB-s\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
@@ -339,7 +315,6 @@ system memory.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR\fR
 .ad
@@ -351,7 +326,6 @@ displays separate reports about processes and tasks at the same time.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIeuidlist\fR\fR
 .ad
@@ -364,7 +338,6 @@ user \fBID\fR may be specified as either a login name or a numerical user
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-U\fR \fIuidlis\fRt\fR
 .ad
@@ -376,7 +349,6 @@ Report only processes whose real user \fBID\fR is in the given list. Each user
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -391,7 +363,6 @@ with the \fB-\fR sign.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-z\fR \fIzoneidlist\fR\fR
 .ad
@@ -404,7 +375,6 @@ can be specified as either a zone name or a numerical zone ID. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Z\fR\fR
 .ad
@@ -421,7 +391,6 @@ The following list defines the column headings and the meanings of a
 \fBprstat\fR report:
 .sp
 .ne 2
-.mk
 .na
 \fBPID\fR
 .ad
@@ -432,7 +401,6 @@ The process \fBID\fR of the process.
 
 .sp
 .ne 2
-.mk
 .na
 \fBUSERNAME\fR
 .ad
@@ -443,7 +411,6 @@ The real user (login) name or real user \fBID\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBSWAP\fR
 .ad
@@ -455,7 +422,6 @@ devices, in kilobytes (\fBK\fR), megabytes (\fBM\fR), or gigabytes (\fBG\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fBRSS\fR
 .ad
@@ -470,7 +436,6 @@ planning should use the \fB-x\fR option to \fBpmap\fR(1) instead.
 
 .sp
 .ne 2
-.mk
 .na
 \fBSTATE\fR
 .ad
@@ -479,7 +444,6 @@ planning should use the \fB-x\fR option to \fBpmap\fR(1) instead.
 The state of the process:
 .sp
 .ne 2
-.mk
 .na
 \fBcpu\fIN\fR\fR
 .ad
@@ -490,7 +454,6 @@ Process is running on \fBCPU\fR \fIN\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBsleep\fR
 .ad
@@ -501,7 +464,6 @@ Sleeping: process is waiting for an event to complete.
 
 .sp
 .ne 2
-.mk
 .na
 \fBwait\fR
 .ad
@@ -513,7 +475,6 @@ limits. See the description of \fBCPU-caps\fR in \fBresource_controls\fR(5).
 
 .sp
 .ne 2
-.mk
 .na
 \fBrun\fR
 .ad
@@ -524,7 +485,6 @@ Runnable: process in on run queue.
 
 .sp
 .ne 2
-.mk
 .na
 \fBzombie\fR
 .ad
@@ -535,7 +495,6 @@ Zombie state: process terminated and parent not waiting.
 
 .sp
 .ne 2
-.mk
 .na
 \fBstop\fR
 .ad
@@ -548,7 +507,6 @@ Process is stopped.
 
 .sp
 .ne 2
-.mk
 .na
 \fBPRI\fR
 .ad
@@ -559,7 +517,6 @@ The priority of the process. Larger numbers mean higher priority.
 
 .sp
 .ne 2
-.mk
 .na
 \fBNICE\fR
 .ad
@@ -571,7 +528,6 @@ classes have a nice value.
 
 .sp
 .ne 2
-.mk
 .na
 \fBTIME\fR
 .ad
@@ -582,7 +538,6 @@ The cumulative execution time for the process.
 
 .sp
 .ne 2
-.mk
 .na
 \fBCPU\fR
 .ad
@@ -596,7 +551,6 @@ that of the processors in the processor set in use by the pool to which the
 
 .sp
 .ne 2
-.mk
 .na
 \fBPROCESS\fR
 .ad
@@ -607,7 +561,6 @@ The name of the process (name of executed file).
 
 .sp
 .ne 2
-.mk
 .na
 \fBLWPID\fR
 .ad
@@ -618,7 +571,6 @@ The \fBlwp\fR \fBID\fR of the \fBlwp\fR being reported.
 
 .sp
 .ne 2
-.mk
 .na
 \fBNLWP\fR
 .ad
@@ -633,7 +585,6 @@ With the some options, in addition to a number of the column headings shown
 above, there are:
 .sp
 .ne 2
-.mk
 .na
 \fBNPROC\fR
 .ad
@@ -644,7 +595,6 @@ Number of processes in a specified collection.
 
 .sp
 .ne 2
-.mk
 .na
 \fBMEMORY\fR
 .ad
@@ -659,7 +609,6 @@ The following columns are displayed when the \fB-v\fR or \fB-m\fR option is
 specified
 .sp
 .ne 2
-.mk
 .na
 \fBUSR\fR
 .ad
@@ -670,7 +619,6 @@ The percentage of time the process has spent in user mode.
 
 .sp
 .ne 2
-.mk
 .na
 \fBSYS\fR
 .ad
@@ -681,7 +629,6 @@ The percentage of time the process has spent in system mode.
 
 .sp
 .ne 2
-.mk
 .na
 \fBTRP\fR
 .ad
@@ -692,7 +639,6 @@ The percentage of time the process has spent in processing system traps.
 
 .sp
 .ne 2
-.mk
 .na
 \fBTFL\fR
 .ad
@@ -703,7 +649,6 @@ The percentage of time the process has spent processing text page faults.
 
 .sp
 .ne 2
-.mk
 .na
 \fBDFL\fR
 .ad
@@ -714,7 +659,6 @@ The percentage of time the process has spent processing data page faults.
 
 .sp
 .ne 2
-.mk
 .na
 \fBLCK\fR
 .ad
@@ -725,7 +669,6 @@ The percentage of time the process has spent waiting for user locks.
 
 .sp
 .ne 2
-.mk
 .na
 \fBSLP\fR
 .ad
@@ -736,7 +679,6 @@ The percentage of time the process has spent sleeping.
 
 .sp
 .ne 2
-.mk
 .na
 \fBLAT\fR
 .ad
@@ -747,7 +689,6 @@ The percentage of time the process has spent waiting for CPU.
 
 .sp
 .ne 2
-.mk
 .na
 \fBVCX\fR
 .ad
@@ -758,7 +699,6 @@ The number of voluntary context switches.
 
 .sp
 .ne 2
-.mk
 .na
 \fBICX\fR
 .ad
@@ -769,7 +709,6 @@ The number of involuntary context switches.
 
 .sp
 .ne 2
-.mk
 .na
 \fBSCL\fR
 .ad
@@ -780,7 +719,6 @@ The number of system calls.
 
 .sp
 .ne 2
-.mk
 .na
 \fBSIG\fR
 .ad
@@ -799,7 +737,6 @@ process.
 The following column is displayed when the \fB-H\fR option is specified:
 .sp
 .ne 2
-.mk
 .na
 \fBLGRP\fR
 .ad
@@ -814,7 +751,6 @@ The home \fIlgroup\fR of the process or lwp.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcount\fR\fR
 .ad
@@ -826,7 +762,6 @@ Specifies the number of times that the statistics are repeated. By default,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIinterval\fR\fR
 .ad
@@ -880,7 +815,7 @@ example% prstat -S rss -n 5 -vc -u root,john
 1185 john    0.0 0.0  -   -   -   -  100  -    0   0   0   0 csh/1
  240 root     0.0 0.0  -   -   -   -  100  -    0   0   0   0 powerd/4
  TOTAL:       71, load averages:  0.02, 0.04, 0.08
- 
+
 .fi
 .in -2
 .sp
@@ -891,7 +826,6 @@ example% prstat -S rss -n 5 -vc -u root,john
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -902,7 +836,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
diff --git a/usr/src/man/man1m/prtconf.1m b/usr/src/man/man1m/prtconf.1m
index 5ee5a2146a..bd93c39ec6 100644
--- a/usr/src/man/man1m/prtconf.1m
+++ b/usr/src/man/man1m/prtconf.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH prtconf 1M "13 Mar 2009" "SunOS 5.11" "System Administration Commands"
+.TH PRTCONF 1M "Mar 13, 2009"
 .SH NAME
 prtconf \- print system configuration
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/prtconf\fR [\fB-V\fR] | [\fB-F\fR] | [\fB-x\fR] | [\fB-bpv\fR] | [\fB-acdDPv\fR] 
+\fB/usr/sbin/prtconf\fR [\fB-V\fR] | [\fB-F\fR] | [\fB-x\fR] | [\fB-bpv\fR] | [\fB-acdDPv\fR]
      [\fIdev_path\fR]
 .fi
 
@@ -30,24 +30,20 @@ that device node.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 Display all the ancestors device nodes, up to the root node of the device tree,
 for the device specified on the command line.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR\fR
 .ad
 .RS 6n
-.rt  
 Display the firmware device tree root properties for the purpose of platform
 identification. These properties are "name", "compatible", "banner-name" and
 "model".
@@ -55,12 +51,10 @@ identification. These properties are "name", "compatible", "banner-name" and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 6n
-.rt  
 Display the device subtree rooted at the device node specified on the command
 line, that is, display all the children of the device node specified on the
 command line.
@@ -68,36 +62,30 @@ command line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 6n
-.rt  
 Display vendor ID and device ID for PCI and PCI Express devices, in addition to
 the nodename.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
 .RS 6n
-.rt  
 For each system peripheral in the device tree, displays the name of the device
 driver used to manage the peripheral.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fR
 .ad
 .RS 6n
-.rt  
 A SPARC-only option. Returns the device path name of the console frame buffer,
 if one exists. If there is no frame buffer, \fBprtconf\fR returns a non-zero
 exit code. This flag must be used by itself. It returns only the name of the
@@ -109,12 +97,10 @@ console frame buffer on a SUNW,Ultra-30 is \fBffb\fR, the command returns:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 6n
-.rt  
 Displays information derived from the device tree provided by the firmware
 (PROM) on SPARC platforms or the booting system on x86 platforms.The device
 tree information displayed using this option is a snapshot of the initial
@@ -124,35 +110,29 @@ later.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR\fR
 .ad
 .RS 6n
-.rt  
 Includes information about pseudo devices. By default, information regarding
 pseudo devices is omitted.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 Specifies verbose mode.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
 .RS 6n
-.rt  
 Displays platform-dependent \fBPROM\fR (on SPARC platforms) or booting system
 (on x86 platforms) version information. This flag must be used by itself. The
 output is a string. The format of the string is arbitrary and
@@ -161,12 +141,10 @@ platform-dependent.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
 .RS 6n
-.rt  
 Reports if the firmware on this system is 64-bit ready. Some existing platforms
 may need a firmware upgrade in order to run the 64-bit kernel. If the operation
 is not applicable to this platform or the firmware is already 64-bit ready, it
@@ -185,12 +163,10 @@ This flag overrides all other flags and must be used by itself.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdev_path\fR\fR
 .ad
 .RS 12n
-.rt  
 The path to a target device minor node, device nexus node, or device link for
 which device node configuration information is displayed
 .RE
@@ -201,23 +177,19 @@ which device node configuration information is displayed
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 No error occurred.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnon-zero\fR\fR
 .ad
 .RS 12n
-.rt  
 With the \fB-F\fR option (SPARC only), a non-zero return value means that the
 output device is not a frame buffer. With the \fB-x\fR option, a non-zero
 return value means that the firmware is not 64-bit ready. In all other cases, a
@@ -232,12 +204,11 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
-Interface StabilityUnstable
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
+Interface Stability	Unstable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/prtdiag.1m b/usr/src/man/man1m/prtdiag.1m
index e13990e3db..8552845f43 100644
--- a/usr/src/man/man1m/prtdiag.1m
+++ b/usr/src/man/man1m/prtdiag.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH prtdiag 1M "2 Sep 2008" "SunOS 5.11" "System Administration Commands"
+.TH PRTDIAG 1M "Sep 2, 2008"
 .SH NAME
 prtdiag \- display system diagnostic information
 .SH SYNOPSIS
@@ -37,24 +37,20 @@ processor (SSP) to obtain such information for this server.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 6n
-.rt  
 Log output. If failures or errors exist in the system, output this information
 to \fBsyslogd\fR(1M) only.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 Verbose mode. Displays the time of the most recent \fBAC\fR Power failure, and
 the most recent hardware fatal error information, and (if applicable)
 environmental status. The hardware fatal error information is useful to repair
@@ -67,34 +63,28 @@ and manufacturing for detailed diagnostics of \fBFRU\fRs.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 No failures or errors are detected in the system.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Failures or errors are detected in the system.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 An internal \fBprtdiag\fR error occurred, for example, out of memory.
 .RE
 
@@ -106,13 +96,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUnstable*
+Interface Stability	Unstable*
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/prtdscp.1m b/usr/src/man/man1m/prtdscp.1m
index 3c98e228ee..10b7304eb2 100644
--- a/usr/src/man/man1m/prtdscp.1m
+++ b/usr/src/man/man1m/prtdscp.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH prtdscp 1M "25 Apr 2006" "SunOS 5.11" "System Administration Commands"
+.TH PRTDSCP 1M "Apr 25, 2006"
 .SH NAME
 prtdscp \- display \fBDSCP\fR \fBIP\fR addresses
 .SH SYNOPSIS
@@ -42,47 +42,39 @@ options, respectively.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 Verbose mode. Print additional details about the program's internal progress to
 \fBstderr\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 6n
-.rt  
 Help. Print a brief synopsis of the program's usage and exit. All other command
 line arguments are ignored.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 6n
-.rt  
 Display only the local domain's \fBIP\fR address.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 6n
-.rt  
 Display only the remote Service Processor's \fBIP\fR address.
 .RE
 
@@ -142,13 +134,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/prtfru.1m b/usr/src/man/man1m/prtfru.1m
index 12c0e6da79..e51133385d 100644
--- a/usr/src/man/man1m/prtfru.1m
+++ b/usr/src/man/man1m/prtfru.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH prtfru 1M "30 May 2002" "SunOS 5.11" "System Administration Commands"
+.TH PRTFRU 1M "May 30, 2002"
 .SH NAME
 prtfru \- print FRUID-specific information about the FRUs on a system or domain
 .SH SYNOPSIS
@@ -31,47 +31,39 @@ redirected to a file.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fR
 .ad
 .RS 7n
-.rt  
 Prints \fIonly\fR the containers and their data. This option does not print the
 \fBFRU\fR tree hierarchy.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fR
 .ad
 .RS 7n
-.rt  
 Prints a \fBDTD\fR for the current registry to stdout.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fR
 .ad
 .RS 7n
-.rt  
 Prints \fIonly\fR the \fBFRU\fR tree hierarchy. This option does not print the
 container data.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fR
 .ad
 .RS 7n
-.rt  
 Prints in \fBXML\fR format with a system identifier (SYSTEM) of
 \fBprtfrureg.dtd\fR.
 .RE
@@ -86,12 +78,10 @@ containers.
 The folowing operand is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcontainer\fR\fR
 .ad
 .RS 13n
-.rt  
 The name of a particular container in the \fBFRU\fR hierarchy, that is, either
 the name or path/name of a container as displayed in the \fB-l\fR option.
 .RE
@@ -102,23 +92,19 @@ the name or path/name of a container as displayed in the \fB-l\fR option.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 All information was found and printed successfully.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error has occurred.
 .RE
 
diff --git a/usr/src/man/man1m/prtpicl.1m b/usr/src/man/man1m/prtpicl.1m
index 37a51fbfa2..4996941ea3 100644
--- a/usr/src/man/man1m/prtpicl.1m
+++ b/usr/src/man/man1m/prtpicl.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH prtpicl 1M "2 Jun 2003" "SunOS 5.11" "System Administration Commands"
+.TH PRTPICL 1M "Jun 2, 2003"
 .SH NAME
 prtpicl \- print PICL tree
 .SH SYNOPSIS
@@ -24,23 +24,19 @@ class of the nodes.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIpicl_class\fR\fR
 .ad
 .RS 17n
-.rt  
 Print only the nodes of the named \fBPICL\fR class.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 17n
-.rt  
 Print in verbose mode. In verbose mode, \fBprtpicl\fR prints a list of
 properties and values for each node. Verbose mode is disabled by default.
 .RE
@@ -51,23 +47,19 @@ properties and values for each node. Verbose mode is disabled by default.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR \fR
 .ad
 .RS 12n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnon-zero\fR\fR
 .ad
 .RS 12n
-.rt  
 An error occurred.
 .RE
 
diff --git a/usr/src/man/man1m/prtvtoc.1m b/usr/src/man/man1m/prtvtoc.1m
index 8d0b326fb6..4f883420c1 100644
--- a/usr/src/man/man1m/prtvtoc.1m
+++ b/usr/src/man/man1m/prtvtoc.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH prtvtoc 1M "25 Jul 2002" "SunOS 5.11" "System Administration Commands"
+.TH PRTVTOC 1M "Jul 25, 2002"
 .SH NAME
 prtvtoc \- report information about a disk geometry and partitioning
 .SH SYNOPSIS
@@ -28,58 +28,48 @@ of \fB/dev/dsk/c?t?d?s2\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 13n
-.rt  
 Report on the disk free space, including the starting block address of the free
 space, number of blocks, and unused partitions.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 13n
-.rt  
 Omit the headers from the normal output.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fI mnttab\fR\fR
 .ad
 .RS 13n
-.rt  
 Use \fImnttab\fR as the list of mounted filesystems, in place of
 \fB/etc/mnttab\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 13n
-.rt  
 Omit all headers but the column header from the normal output.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fI vfstab\fR\fR
 .ad
 .RS 13n
-.rt  
 Use \fIvfstab\fR as the list of filesystem defaults, in place of
 \fB/etc/vfstab\fR.
 .RE
@@ -131,23 +121,21 @@ follows:
 
 .sp
 .TS
-tab();
-cw(2.5i) cw(3i) 
-lw(2.5i) lw(3i) 
-.
-\fIName\fR\fINumber\fR
-UNASSIGNED0x00
-BOOT0x01
-ROOT0x02
-SWAP0x03
-USR0x04
-BACKUP0x05
-STAND0x06
-VAR0x07
-HOME0x08
-ALTSCTR 0x09
-CACHE0x0a
-RESERVED0x0b
+c c
+l l .
+\fIName\fR	\fINumber\fR
+UNASSIGNED	0x00
+BOOT	0x01
+ROOT	0x02
+SWAP	0x03
+USR	0x04
+BACKUP	0x05
+STAND	0x06
+VAR	0x07
+HOME	0x08
+ALTSCTR	 0x09
+CACHE	0x0a
+RESERVED	0x0b
 .TE
 
 .sp
@@ -159,14 +147,12 @@ mounted, as follows:
 
 .sp
 .TS
-tab();
-lw(2.5i) lw(3i) 
-lw(2.5i) lw(3i) 
-.
-\fIName\fR\fINumber\fR
-MOUNTABLE, READ AND WRITE0x00
-NOT MOUNTABLE0x01
-MOUNTABLE, READ ONLY0x10
+l l
+l l .
+\fIName\fR	\fINumber\fR
+MOUNTABLE, READ AND WRITE	0x00
+NOT MOUNTABLE	0x01
+MOUNTABLE, READ ONLY	0x10
 .TE
 
 .LP
diff --git a/usr/src/man/man1m/psradm.1m b/usr/src/man/man1m/psradm.1m
index d151fc74e2..917e715b27 100644
--- a/usr/src/man/man1m/psradm.1m
+++ b/usr/src/man/man1m/psradm.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH psradm 1M "25 Feb 2008" "SunOS 5.11" "System Administration Commands"
+.TH PSRADM 1M "Feb 25, 2008"
 .SH NAME
 psradm \- change processor operational status
 .SH SYNOPSIS
@@ -80,34 +80,28 @@ Only users with the \fBPRIV_SYS_RES_CONFIG\fR privilege can use the
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 Perform the action on all processors, or as many as possible.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 6n
-.rt  
 Take the specified processors \fBoff-line\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fR
 .ad
 .RS 6n
-.rt  
 Force the transition to the additional specified state. Required if one or more
 of the specified processors was in the faulted state. Set the specified
 processors to faulted, if no other transition option was specified. Forced
@@ -119,45 +113,37 @@ processor state transition.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 6n
-.rt  
 Set the specified processors \fBno-intr\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 6n
-.rt  
 Bring the specified processors \fBon-line\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 6n
-.rt  
 Make the specified processors spare.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 Output a message giving the results of each attempted operation.
 .RE
 
@@ -167,12 +153,10 @@ Output a message giving the results of each attempted operation.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIprocessor_id\fR\fR
 .ad
 .RS 16n
-.rt  
 The processor \fBID\fR of the processor to be set \fBon-line\fR or
 \fBoff-line\fR, \fBspare\fR, or \fBno-intr\fR.
 .sp
@@ -258,35 +242,29 @@ processor bindings from the processes bound to them:
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/wtmpx\fR\fR
 .ad
 .RS 14n
-.rt  
 Records logging processor status changes
 .RE
 
@@ -298,7 +276,6 @@ Records logging processor status changes
 .SH DIAGNOSTICS
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpsradm: processor 4: Invalid argument\fR\fR
 .ad
@@ -309,7 +286,6 @@ The specified processor does not exist in the configuration.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpsradm: processor 3: Device busy\fR\fR
 .ad
@@ -322,7 +298,6 @@ needed by the system because it provides some essential service.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpsradm: processor 3: Device busy\fR\fR
 .ad
@@ -335,7 +310,6 @@ system that can service interrupts needed by the system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpsradm: processor 3: Device busy\fR\fR
 .ad
@@ -347,7 +321,6 @@ some platform-specific resource is unavailable.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpsradm: processor 0: Not owner\fR\fR
 .ad
@@ -358,7 +331,6 @@ The user does not have permission to change processor status.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpsradm: processor 2: Operation not supported\fR\fR
 .ad
diff --git a/usr/src/man/man1m/psrinfo.1m b/usr/src/man/man1m/psrinfo.1m
index be0fde639c..9e107275e8 100644
--- a/usr/src/man/man1m/psrinfo.1m
+++ b/usr/src/man/man1m/psrinfo.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH psrinfo 1M "21 Feb 2004" "SunOS 5.11" "System Administration Commands"
+.TH PSRINFO 1M "Feb 21, 2004"
 .SH NAME
 psrinfo \- displays information about processors
 .SH SYNOPSIS
@@ -36,12 +36,10 @@ a specific processor. See \fBOPERANDS\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fI processor_id\fR\fR
 .ad
 .RS 19n
-.rt  
 Silent mode. Displays \fB1\fR if the specified processor is fully on-line.
 Displays \fB0\fR if the specified processor is non-interruptible, spare,
 off-line, faulted or powered off.
@@ -51,12 +49,10 @@ Use silent mode when using \fBpsrinfo\fR in shell scripts.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 19n
-.rt  
 Display the number of physical processors in a system.
 .sp
 When combined with the \fB-v\fR option, reports additional information about
@@ -65,12 +61,10 @@ each physical processor.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 19n
-.rt  
 Verbose mode. Displays additional information about the specified processors,
 including: processor type, floating point unit type and clock speed. If any of
 this information cannot be determined, \fBpsrinfo\fR displays \fBunknown\fR.
@@ -85,12 +79,10 @@ each physical processor.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIprocessor_id\fR\fR
 .ad
 .RS 16n
-.rt  
 The processor \fBID\fR of the processor about which information is to be
 displayed.
 .sp
@@ -113,7 +105,7 @@ verbose mode.
 .sp
 .in +2
 .nf
-\fBpsrinfo \fR\fB-v\fR 
+\fBpsrinfo \fR\fB-v\fR
 .fi
 .in -2
 .sp
@@ -160,10 +152,10 @@ the number of physical processors in the system:
 .sp
 .in +2
 .nf
-> psrinfo -p 0 512   # IDs 0 and 512 exist on the 
+> psrinfo -p 0 512   # IDs 0 and 512 exist on the
 1                    # same physical processor
 
-> psrinfo -p 0 1     # IDs 0 and 1 exist on different 
+> psrinfo -p 0 1     # IDs 0 and 1 exist on different
 2                    # physical processors
 .fi
 .in -2
@@ -181,23 +173,19 @@ specific to this example and is and not a general rule.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -209,7 +197,6 @@ An error occurred.
 .SH DIAGNOSTICS
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpsrinfo:\fR \fBprocessor\fR \fB9:\fR \fBInvalid\fR \fBargument\fR\fR
 .ad
diff --git a/usr/src/man/man1m/psrset.1m b/usr/src/man/man1m/psrset.1m
index f971398bfe..0212e6fa07 100644
--- a/usr/src/man/man1m/psrset.1m
+++ b/usr/src/man/man1m/psrset.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH psrset 1M "25 Feb 2008" "SunOS 5.11" "System Administration Commands"
+.TH PSRSET 1M "Feb 25, 2008"
 .SH NAME
 psrset \- creation and management of processor sets
 .SH SYNOPSIS
@@ -95,12 +95,10 @@ configuration through the resource pools facility.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 Assign the specified processors to the specified processor set. With the
 additional \fB-F\fR option, all LWPs bound to the specified processors will be
 unbound prior to changing processor sets.
@@ -111,12 +109,10 @@ privilege.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR\fR
 .ad
 .RS 6n
-.rt  
 Bind all or a subset of the \fBLWP\fRs of the specified processes to the
 specified processor set.
 .sp
@@ -134,12 +130,10 @@ privilege.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 6n
-.rt  
 Create a new processor set and displays the new processor set \fBID\fR. With
 the additional \fB-F\fR option, all LWPs bound to the specified processors will
 be unbound prior to assigning them to the processor set being created.
@@ -170,12 +164,10 @@ replaced with more appropriate strings corresponding to the locale.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 6n
-.rt  
 Remove the specified processor set, releasing all processors and processes
 associated with it.
 .sp
@@ -185,12 +177,10 @@ privilege.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
 .RS 6n
-.rt  
 Execute a command (with optional arguments) in the specified processor set.
 .sp
 The command process and any child processes are executed only by processors in
@@ -202,12 +192,10 @@ privilege.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 6n
-.rt  
 Disables interrupts for all processors within the specified processor set. See
 \fBpsradm\fR(1M).
 .sp
@@ -221,12 +209,10 @@ privilege.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fR
 .ad
 .RS 6n
-.rt  
 Forces the specified processor set operation by unbinding all threads bound to
 the specified processor. Only the \fB-a\fR or the \fB-r\fR option can be used
 in combination with this option. Administrators are encouraged to use the
@@ -236,12 +222,10 @@ by such operation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 6n
-.rt  
 Display a list of processors assigned to each named processor set. If no
 argument is given, a list of all processor sets and the processors assigned to
 them is displayed. This is also the default operation if the \fBpsrset\fR
@@ -250,12 +234,10 @@ command is not given an option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 6n
-.rt  
 Enable interrupts for all processors within the specified processor set. See
 \fBpsradm\fR(1M).
 .sp
@@ -265,12 +247,10 @@ privilege.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 6n
-.rt  
 Display the processor set assignments for the specified list of processors. If
 no argument is given, the processor set assignments for all processors in the
 system is given.
@@ -278,12 +258,10 @@ system is given.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
 .RS 6n
-.rt  
 Display the processor set bindings of the specified processes or of all
 processes. If a process is composed of multiple \fBLWP\fRs which have different
 bindings and the LWPs are not explicitly specified, the bindings of only one of
@@ -294,24 +272,20 @@ selected using "-" and "," delimiters. See EXAMPLES.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Q\fR\fR
 .ad
 .RS 6n
-.rt  
 Display the LWPs bound to the specified list of processor sets, or all LWPs
 with processor set bindings.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 6n
-.rt  
 Remove a list of processors from their current processor sets. Processors that
 are removed return to the general pool of processors.
 .sp
@@ -324,12 +298,10 @@ privilege.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
 .RS 6n
-.rt  
 Remove the processor set bindings of a subset or all the \fBLWP\fRs of the
 specified processes, allowing them to be executed on any on-line processor if
 they are not bound to individual processors through \fBpbind\fR.
@@ -344,12 +316,10 @@ the target processes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-U\fR\fR
 .ad
 .RS 6n
-.rt  
 Removes the bindings of all LWPs bound to the specified list of processor sets,
 or to any processor set if no argument is specified.
 .RE
@@ -360,23 +330,19 @@ or to any processor set if no argument is specified.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpid\fR\fR
 .ad
 .RS 20n
-.rt  
 Specify \fIpid\fR as a process \fBID\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIlwpid\fR\fR
 .ad
 .RS 20n
-.rt  
 The set of LWP\fBID\fRs of the specified process to be controlled or queried.
 The syntax for selecting LWP \fBID\fRs is as follows:
 .sp
@@ -392,12 +358,10 @@ The syntax for selecting LWP \fBID\fRs is as follows:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIprocessor_id\fR\fR
 .ad
 .RS 20n
-.rt  
 Specify \fIprocessor_id\fR as an individual processor number (for example,
 \fB3\fR), multiple processor numbers separated by spaces (for example, \fB1 2
 3\fR), or a range of processor numbers (for example, \fB1-4\fR). It is also
@@ -407,12 +371,10 @@ possible to combine ranges and (individual or multiple) \fIprocessor_id\fRs
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIprocessor_set_id\fR\fR
 .ad
 .RS 20n
-.rt  
 Specify \fIprocessor_set_id\fR as a processor set \fBID\fR.
 .RE
 
@@ -422,23 +384,19 @@ Specify \fIprocessor_set_id\fR as a processor set \fBID\fR.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 9n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-0\fR
 .ad
 .RS 9n
-.rt  
 An error occurred.
 .RE
 
@@ -450,13 +408,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Stability LevelStable
+Stability Level	Stable
 .TE
 
 .SH SEE ALSO
@@ -575,7 +532,7 @@ The following output indicates that the pools facility is active.
 .nf
 psrset: cannot assign processor 7: Operation not supported
 psrset: cannot bind pid 31: Operation not supported
-psrset: cannot bind pid 31: Operation not supported 
+psrset: cannot bind pid 31: Operation not supported
 psrset: could not create processor set: Operation not supported
 psrset: could not remove processor set 1: Operation not supported
 psrset: cannot exec in processor set 1: Operation not supported
diff --git a/usr/src/man/man1m/putdev.1m b/usr/src/man/man1m/putdev.1m
index 612a121313..4452c11b56 100644
--- a/usr/src/man/man1m/putdev.1m
+++ b/usr/src/man/man1m/putdev.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH putdev 1M "3 Apr 1997" "SunOS 5.11" "System Administration Commands"
+.TH PUTDEV 1M "Apr 3, 1997"
 .SH NAME
 putdev \- edits device table
 .SH SYNOPSIS
@@ -39,24 +39,20 @@ used, to delete an attribute assignment for a device.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 Add a device to the device table using the specified attributes. The device
 must be referenced by its \fBalias\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 6n
-.rt  
 Remove a device from the device table, when executed without the
 \fIattributes\fR argument. Used with the \fIattribute\fR argument, it deletes
 the given attribute specification for \fIdevice\fR from the table.
@@ -64,12 +60,10 @@ the given attribute specification for \fIdevice\fR from the table.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
 .RS 6n
-.rt  
 Modify a device entry in the device table. If an entry already exists, it adds
 any specified attributes that are not defined. It also modifies any attributes
 which already have a value  with the value specified by this command.
@@ -81,23 +75,19 @@ which already have a value  with the value specified by this command.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIalias\fR\fR
 .ad
 .RS 13n
-.rt  
 Designates the alias of the device to be added.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIattribute\fR\fR
 .ad
 .RS 13n
-.rt  
 Designates a device attribute to be added, modified, or deleted. Can be any of
 the device attributes described under \fBDEVICE\fR \fBATTRIBUTES\fR except
 \fBalias\fR. This prevents an accidental modification or deletion of a device's
@@ -106,24 +96,20 @@ alias from the table.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdevice\fR\fR
 .ad
 .RS 13n
-.rt  
 Designates the pathname or alias of the device  whose attribute is to be added,
 modified, or removed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIvalue\fR\fR
 .ad
 .RS 13n
-.rt  
 Designates the value to be assigned to a device's attribute.
 .RE
 
@@ -136,12 +122,10 @@ device. You are not limited to this list, you can define any attribute you
 like.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBalias\fR\fR
 .ad
 .RS 13n
-.rt  
 The unique name by which a device is known. No two devices in the database may
 share the same alias name. The name is limited in length to 14 characters and
 should contain only alphanumeric characters and the following special
@@ -151,12 +135,10 @@ characters if they are escaped with a backslash:  underscore ( _ ), dollar sign
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbdevice\fR\fR
 .ad
 .RS 13n
-.rt  
 The pathname to the block special device node associated with the device, if
 any. The associated major/minor combination should be unique within the
 database and should match that associated with the \fBcdevice\fR field, if any.
@@ -166,23 +148,19 @@ database and should match that associated with the \fBcdevice\fR field, if any.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcapacity\fR\fR
 .ad
 .RS 13n
-.rt  
 The capacity of the device or of the typical volume, if removable.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcdevice\fR\fR
 .ad
 .RS 13n
-.rt  
 The pathname to the character special device node associated with the device,
 if any. The associated major/minor combination should be unique within the
 database and should match that associated with the \fBbdevice\fR field, if any.
@@ -192,35 +170,29 @@ database and should match that associated with the \fBbdevice\fR field, if any.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcyl\fR\fR
 .ad
 .RS 13n
-.rt  
 Used by the command specified in the \fBmkfscmd\fR attribute.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdesc\fR\fR
 .ad
 .RS 13n
-.rt  
 A description of any instance of a volume associated with this device (such as
 floppy diskette).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdpartlist\fR\fR
 .ad
 .RS 13n
-.rt  
 The list of disk partitions associated with this device. Used only if
 \fBtype=disk\fR. The list should contain device aliases, each of which must
 have \fBtype=dpart\fR.
@@ -228,12 +200,10 @@ have \fBtype=dpart\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdparttype\fR\fR
 .ad
 .RS 13n
-.rt  
 The type of disk partition represented by this device. Used only if
 \fBtype=dpart\fR. It should be either \fBfs\fR (for file system) or \fBdp\fR
 (for data partition).
@@ -241,34 +211,28 @@ The type of disk partition represented by this device. Used only if
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBerasecmd\fR\fR
 .ad
 .RS 13n
-.rt  
 The command string that, when executed, erases the device.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfmtcmd\fR\fR
 .ad
 .RS 13n
-.rt  
 The command string that, when executed, formats the device.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfsname\fR\fR
 .ad
 .RS 13n
-.rt  
 The file system name on the file system administered on this partition, as
 supplied to the \fB/usr/sbin/labelit\fR command. This attribute is specified
 only if \fBtype=dpart\fR and \fBdparttype=fs\fR.
@@ -276,35 +240,29 @@ only if \fBtype=dpart\fR and \fBdparttype=fs\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgap\fR\fR
 .ad
 .RS 13n
-.rt  
 Used by the command specified in the \fBmkfscmd\fR attribute.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmkfscmd\fR\fR
 .ad
 .RS 13n
-.rt  
 The command string that, when executed, places a file system on a previously
 formatted device.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmountpt\fR\fR
 .ad
 .RS 13n
-.rt  
 The default mount point to use for the device. Used only if the device is
 mountable. For disk partitions where \fBtype=dpart\fR and \fBdparttype=fs\fR,
 this attribute should specify the location where the partition is normally
@@ -313,72 +271,60 @@ mounted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnblocks\fR\fR
 .ad
 .RS 13n
-.rt  
 The number of blocks in the file system administered on this partition. Used
 only if \fBtype=dpart\fR and \fBdparttype=fs\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBninodes\fR\fR
 .ad
 .RS 13n
-.rt  
 The number of inodes in the file system administered on this partition. Used
 only if \fBtype=dpart\fR and \fBdparttype=fs\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnorewind\fR\fR
 .ad
 .RS 13n
-.rt  
 The name of the character special device node that allows access to the serial
 device without rewinding when the device is closed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpathname\fR\fR
 .ad
 .RS 13n
-.rt  
 Defines the pathname to an i-node describing the device (used for non-block or
 character device pathnames, such as directories).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtype\fR\fR
 .ad
 .RS 13n
-.rt  
 A token that represents inherent qualities of the device. Standard types
 include: 9-track, ctape, disk, directory, diskette, dpart, and qtape.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvolname\fR\fR
 .ad
 .RS 13n
-.rt  
 The volume name on the file system administered on this partition, as supplied
 to the \fB/usr/sbin/labelit\fR command. Used only if \fBtype=dpart\fR and
 \fBdparttype=fs\fR.
@@ -386,12 +332,10 @@ to the \fB/usr/sbin/labelit\fR command. Used only if \fBtype=dpart\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvolume\fR\fR
 .ad
 .RS 13n
-.rt  
 A text string used to describe any instance of a volume associated with this
 device. This attribute should not be defined for devices which are not
 removable.
@@ -403,47 +347,39 @@ removable.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Command syntax was incorrect, an invalid option was used, or an internal error
 occurred.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 The device table could not be opened for reading, or a new device table could
 not be created.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 5n
-.rt  
 If executed with the \fB-a\fR option, indicates that an entry in the device
 table with the alias \fBalias\fR already exits. If executed with the \fB-m\fR
 or \fB-d\fR options, indicates that no entry exists for device \fIdevice\fR.
@@ -451,12 +387,10 @@ or \fB-d\fR options, indicates that no entry exists for device \fIdevice\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR\fR
 .ad
 .RS 5n
-.rt  
 Indicates that  \fB-d\fR was requested and one or more of the specified
 attributes were not defined for the device.
 .RE
@@ -464,12 +398,10 @@ attributes were not defined for the device.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/device.tab\fR\fR
 .ad
 .RS 19n
-.rt  
 
 .RE
 
diff --git a/usr/src/man/man1m/putdgrp.1m b/usr/src/man/man1m/putdgrp.1m
index 84ad611f40..25e688f6ce 100644
--- a/usr/src/man/man1m/putdgrp.1m
+++ b/usr/src/man/man1m/putdgrp.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH putdgrp 1M "5 Jul 1990" "SunOS 5.11" "System Administration Commands"
+.TH PUTDGRP 1M "Jul 5, 1990"
 .SH NAME
 putdgrp \- edits device group table
 .SH SYNOPSIS
@@ -42,12 +42,10 @@ adds the specified devices to that new group.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 6n
-.rt  
 Delete the group or, if used with \fIdevice\fR, delete the device  from a group
 definition.
 .RE
@@ -58,23 +56,19 @@ definition.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdgroup\fR\fR
 .ad
 .RS 10n
-.rt  
 Specify a device group name.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdevice\fR\fR
 .ad
 .RS 10n
-.rt  
 Specify the pathname or alias of the device that is to be added to, or deleted
 from, the device group.
 .RE
@@ -85,47 +79,39 @@ from, the device group.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Command syntax was incorrect, an invalid option was used,  or an internal error
 occurred.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Device group table could not be opened for reading or a new device group table
 could not be created.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 5n
-.rt  
 If executed with the  \fB-d\fR option, indicates that an entry in the device
 group table for the device group  \fIdgroup\fR does not exist and so cannot be
 deleted. Otherwise, indicates that the  device group \fIdgroup\fR already
@@ -134,12 +120,10 @@ exists and cannot be added.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR\fR
 .ad
 .RS 5n
-.rt  
 If executed with the  \fB-d\fR option, indicates that the device group
 \fIdgroup\fR does not have as members one or more of the specified devices.
 Otherwise, indicates that the device group  \fIdgroup\fR already has one or
@@ -206,12 +190,10 @@ example#  \fBputdgrp \fR\fB-d\fR\fB floppies diskette2\fR
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dgroup.tab\fR\fR
 .ad
 .RS 19n
-.rt  
 
 .RE
 
diff --git a/usr/src/man/man1m/pwck.1m b/usr/src/man/man1m/pwck.1m
index cce4645b50..3506fbc7fe 100644
--- a/usr/src/man/man1m/pwck.1m
+++ b/usr/src/man/man1m/pwck.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH pwck 1M "27 Aug 2008" "SunOS 5.11" "System Administration Commands"
+.TH PWCK 1M "Aug 27, 2008"
 .SH NAME
 pwck, grpck \- password/group file checkers
 .SH SYNOPSIS
@@ -64,7 +64,6 @@ stream.
 Group entries in \fB/etc/group\fR with no login names are flagged.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBGroup file '\fR\fIfilename\fR\fB\&' is empty\fR\fR
 .ad
@@ -75,7 +74,6 @@ The \fB/etc/passwd\fR or \fB/etc/group\fR file is an empty file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcannot open file\fR \fIfilename\fR\fB: No such file or directory\fR\fR
 .ad
diff --git a/usr/src/man/man1m/pwconv.1m b/usr/src/man/man1m/pwconv.1m
index b0fd7c16e2..8b7658f55b 100644
--- a/usr/src/man/man1m/pwconv.1m
+++ b/usr/src/man/man1m/pwconv.1m
@@ -4,13 +4,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH pwconv 1M "9 Mar 1993" "SunOS 5.11" "System Administration Commands"
+.TH PWCONV 1M "Mar 9, 1993"
 .SH NAME
 pwconv \- installs and updates /etc/shadow with information from /etc/passwd
 .SH SYNOPSIS
 .LP
 .nf
-\fBpwconv\fR 
+\fBpwconv\fR
 .fi
 
 .SH DESCRIPTION
@@ -37,7 +37,6 @@ If the  \fB/etc/shadow\fR file does exist, the following tasks will be
 performed:
 .sp
 .ne 2
-.mk
 .na
 \fB\fR
 .ad
@@ -49,7 +48,6 @@ Entries that are in the  \fB/etc/passwd\fR file and not in the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fR
 .ad
@@ -61,7 +59,6 @@ Entries that are in the  \fB/etc/shadow\fR file and not in the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fR
 .ad
@@ -78,45 +75,37 @@ The \fBpwconv\fR command can only be used by the super-user.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/opasswd\fR\fR
 .ad
 .RS 16n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/oshadow\fR\fR
 .ad
 .RS 16n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/passwd\fR\fR
 .ad
 .RS 16n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/shadow\fR\fR
 .ad
 .RS 16n
-.rt  
 
 .RE
 
@@ -131,78 +120,64 @@ The \fBpwconv\fR command can only be used by the super-user.
 \fBpwconv\fR exits with one of the following values:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 \fBSUCCESS.\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Permission denied.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Invalid command syntax.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 5n
-.rt  
 Unexpected failure.  Conversion not done.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR\fR
 .ad
 .RS 5n
-.rt  
 Unexpected failure.  Password file(s) missing.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB5\fR\fR
 .ad
 .RS 5n
-.rt  
 Password file(s) busy.  Try again later.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB6\fR\fR
 .ad
 .RS 5n
-.rt  
 Bad entry in \fB/etc/shadow\fR file.
 .RE
 
diff --git a/usr/src/man/man1m/quot.1m b/usr/src/man/man1m/quot.1m
index ceda1a0307..2286eaed75 100644
--- a/usr/src/man/man1m/quot.1m
+++ b/usr/src/man/man1m/quot.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH quot 1M "30 May 2001" "SunOS 5.11" "System Administration Commands"
+.TH QUOT 1M "May 30, 2001"
 .SH NAME
 quot \- summarize file system ownership
 .SH SYNOPSIS
@@ -31,23 +31,19 @@ but the total block count will be correct.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 Generate a report for all mounted file systems.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 6n
-.rt  
 Display three columns giving a file size in blocks, the number of files of that
 size, and a cumulative total of blocks containing files of that size or a
 smaller size.
@@ -55,12 +51,10 @@ smaller size.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 6n
-.rt  
 Display three columns giving, for each user, the number of blocks owned, the
 count of number of files, and the user name. This option is incompatible with
 the \fB-c\fR and \fB-v\fR options.
@@ -68,24 +62,20 @@ the \fB-c\fR and \fB-v\fR options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 6n
-.rt  
 Estimate the number of blocks in the file. This does not account for files with
 holes in them.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 6n
-.rt  
 Attach names to the list of files read from standard input. \fBquot\fR \fB-n\fR
 cannot be used alone, because it expects data from standard input. For example,
 the pipeline
@@ -98,12 +88,10 @@ with all other options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 In addition to the default output, display three columns containing the number
 of blocks not accessed in the last 30, 60, and 90 days.
 .RE
@@ -111,12 +99,10 @@ of blocks not accessed in the last 30, 60, and 90 days.
 .SH OPERANDS
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfilesystem\fR\fR
 .ad
 .RS 14n
-.rt  
 mount-point of the filesystem(s) being checked
 .RE
 
@@ -128,46 +114,38 @@ encountering files greater than or equal to 2 Gbyte ( 2^31 bytes).
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful operation.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB32\fR\fR
 .ad
 .RS 6n
-.rt  
 Error condition (bad or missing argument, bad path, or other error).
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mnttab\fR\fR
 .ad
 .RS 15n
-.rt  
 Lists mounted file systems.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/passwd\fR\fR
 .ad
 .RS 15n
-.rt  
 Used to obtain user names
 .RE
 
diff --git a/usr/src/man/man1m/quota.1m b/usr/src/man/man1m/quota.1m
index 05fcb83321..bdf95c2430 100644
--- a/usr/src/man/man1m/quota.1m
+++ b/usr/src/man/man1m/quota.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH quota 1M "30 Apr 2009" "SunOS 5.11" "System Administration Commands"
+.TH QUOTA 1M "Apr 30, 2009"
 .SH NAME
 quota \- display a user's ufs or zfs file system disk quota and usage
 .SH SYNOPSIS
@@ -29,12 +29,10 @@ quotas turned on are ignored.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 Display user's quota on all mounted file systems where quotas exist.
 .RE
 
@@ -46,12 +44,10 @@ encountering files greater than or equal to 2 Gbyte ( 2^31 bytes).
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mnttab\fR\fR
 .ad
 .RS 15n
-.rt  
 list of currently mounted filesystems
 .RE
 
@@ -81,6 +77,6 @@ multiple mount points. For example,
 
 .sp
 .LP
-might display identical quota information for \fBuser1\fR at the mount 	points
+might display identical quota information for \fBuser1\fR at the mount points
 \fB/home/user1\fR, \fB/home/user2\fR, and \fB/home/user\fR, if all three mount
 points are mounted from the same file system with quotas turned on.
diff --git a/usr/src/man/man1m/quotacheck.1m b/usr/src/man/man1m/quotacheck.1m
index 8792e3f376..6faf44ab5a 100644
--- a/usr/src/man/man1m/quotacheck.1m
+++ b/usr/src/man/man1m/quotacheck.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH quotacheck 1M "31 Jul 1998" "SunOS 5.11" "System Administration Commands"
+.TH QUOTACHECK 1M "Jul 31, 1998"
 .SH NAME
 quotacheck \- ufs file system quota consistency checker
 .SH SYNOPSIS
@@ -44,12 +44,10 @@ be quiescent while \fBquotacheck\fR is running.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 Check the file systems which \fB/etc/mnttab\fR indicates are ufs file systems.
 These file systems must be read-write mounted  with disk quotas enabled, and
 have an \fBrq\fR entry in the \fBmntopts\fR field in \fB/etc/vfstab\fR.
@@ -57,36 +55,30 @@ have an \fBrq\fR entry in the \fBmntopts\fR field in \fB/etc/vfstab\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 6n
-.rt  
 Force check on file systems with logging enabled. Use in combination with the
 \fB-p\fR option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 6n
-.rt  
 Check quotas of file systems in parallel. For file systems with logging
 enabled, no check is performed unless the \fB-f\fR option is also specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 Indicate the calculated disk quotas for each user on a particular file system.
 \fBquotacheck\fR normally reports only those quotas modified.
 .RE
@@ -99,23 +91,19 @@ when encountering files greater than or equal to 2 Gbyte ( 2^31 bytes).
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mnttab\fR\fR
 .ad
 .RS 15n
-.rt  
 Mounted file systems
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vfstab\fR\fR
 .ad
 .RS 15n
-.rt  
 List of default parameters for each file system
 .RE
 
diff --git a/usr/src/man/man1m/quotaon.1m b/usr/src/man/man1m/quotaon.1m
index 838e55c466..984083839d 100644
--- a/usr/src/man/man1m/quotaon.1m
+++ b/usr/src/man/man1m/quotaon.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH quotaon 1M "16 Sep 1996" "SunOS 5.11" "System Administration Commands"
+.TH QUOTAON 1M "Sep 16, 1996"
 .SH NAME
 quotaon, quotaoff \- turn ufs file system quotas on and off
 .SH SYNOPSIS
@@ -57,12 +57,10 @@ device on which the file system resides.
 .SS "quotaon"
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 This option is normally used at boot time to enable quotas. It applies only to
 those file systems in \fB/etc/vfstab\fR which have ``rq'' in the \fBmntopts\fR
 field, are currently mounted ``rw'', and have a \fBquotas\fR file in the root
@@ -71,35 +69,29 @@ directory.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 Display a message for each file system after quotas are turned on.
 .RE
 
 .SS "quotaoff"
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 Force all file systems in \fB/etc/mnttab\fR to have their quotas disabled.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 Display a message for each file system affected.
 .RE
 
@@ -112,23 +104,19 @@ bytes).
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mnttab\fR\fR
 .ad
 .RS 15n
-.rt  
 mounted file systems
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vfstab\fR\fR
 .ad
 .RS 15n
-.rt  
 list of default parameters for each file system
 .RE
 
diff --git a/usr/src/man/man1m/raidctl.1m b/usr/src/man/man1m/raidctl.1m
index dec35fbcde..88c39038a9 100644
--- a/usr/src/man/man1m/raidctl.1m
+++ b/usr/src/man/man1m/raidctl.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH raidctl 1M "5 Feb 2009" "SunOS 5.11" "System Administration Commands"
+.TH RAIDCTL 1M "Feb 5, 2009"
 .SH NAME
 raidctl \- RAID hardware utility
 .SH SYNOPSIS
@@ -30,7 +30,7 @@ raidctl \- RAID hardware utility
 
 .LP
 .nf
-\fBraidctl\fR \fB-p\fR \fI"param=value"\fR [\fB-f\fR] \fIvolume\fR 
+\fBraidctl\fR \fB-p\fR \fI"param=value"\fR [\fB-f\fR] \fIvolume\fR
 .fi
 
 .LP
@@ -155,7 +155,6 @@ SPARC platforms.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR \fI"disks"\fR [\fB-r\fR \fIraid_level\fR] [\fB-z\fR \fIcapacity\fR]
 [\fB-s\fR \fIstripe_size\fR] [\fB-f\fR] controller\fR
@@ -176,7 +175,6 @@ unit number 2). The argument must match the RAID level specified by the
 \fB-r\fR option, even if it's omitted. This means the argument can only be:
 .sp
 .ne 2
-.mk
 .na
 \fBfor RAID 0\fR
 .ad
@@ -187,7 +185,6 @@ At least 2 disks
 
 .sp
 .ne 2
-.mk
 .na
 \fBfor RAID 1\fR
 .ad
@@ -198,7 +195,6 @@ Only 2 disks
 
 .sp
 .ne 2
-.mk
 .na
 \fBfor RAID 1E\fR
 .ad
@@ -209,7 +205,6 @@ At least 3 disks
 
 .sp
 .ne 2
-.mk
 .na
 \fBfor RAID 5\fR
 .ad
@@ -220,7 +215,6 @@ At least 3 disks
 
 .sp
 .ne 2
-.mk
 .na
 \fBfor RAID 10\fR
 .ad
@@ -231,7 +225,6 @@ At least 2 sub-volumes, each sub-volume must be formed by 2 disks
 
 .sp
 .ne 2
-.mk
 .na
 \fBfor RAID 50\fR
 .ad
@@ -275,7 +268,6 @@ number.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR [\fB-f\fR] \fIvolume\fR\fR
 .ad
@@ -297,7 +289,6 @@ image of the data.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fIfilename\fR [\fB-f\fR] \fIcontroller\fR\&.\|.\|.\fR
 .ad
@@ -310,7 +301,6 @@ option is provided.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR {\fBset\fR | \fBunset\fR} \fB-g\fR \fIdisk\fR {\fBvolume\fR |
 \fBcontroller\fR}\fR
@@ -325,7 +315,6 @@ the disk as a global hot-spare disk.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fI"param=value"\fR [\fB-f\fR] \fIvolume\fR\fR
 .ad
@@ -345,7 +334,6 @@ applying the change, unless the \fB-f\fR option is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR [\fB-f\fR] [\fB-r\fR \fIraid_level\fR] \fIdisk1\fR \fIdisk2\fR
 [\fIdisk3\fR...]\fR
@@ -377,7 +365,6 @@ force the volume creation without prompting the user for confirmation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR -g \fIdisk controller\fR\fR
 .ad
@@ -387,7 +374,6 @@ Display information about the specified disk of the given controller. The
 output includes the following information:
 .sp
 .ne 2
-.mk
 .na
 \fBDisk\fR
 .ad
@@ -398,7 +384,6 @@ Displays the disk in \fBC.ID.L\fR expression disk.
 
 .sp
 .ne 2
-.mk
 .na
 \fBVendor\fR
 .ad
@@ -409,7 +394,6 @@ Displays the vendor ID string.
 
 .sp
 .ne 2
-.mk
 .na
 \fBProduct\fR
 .ad
@@ -420,7 +404,6 @@ Displays the product ID string.
 
 .sp
 .ne 2
-.mk
 .na
 \fBCapacity\fR
 .ad
@@ -431,7 +414,6 @@ Displays the total capacity of the disk.
 
 .sp
 .ne 2
-.mk
 .na
 \fBStatus\fR
 .ad
@@ -444,7 +426,6 @@ not present).
 
 .sp
 .ne 2
-.mk
 .na
 \fBHSP\fR
 .ad
@@ -457,7 +438,6 @@ disk is assigned to are displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fBGUID\fR
 .ad
@@ -471,7 +451,6 @@ unavailable in some cases.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIvolume\fR\fR
 .ad
@@ -481,7 +460,6 @@ Display information about the specified volume. The output includes the
 following information:
 .sp
 .ne 2
-.mk
 .na
 \fBVolume\fR
 .ad
@@ -492,7 +470,6 @@ Displays volume in canonical format.
 
 .sp
 .ne 2
-.mk
 .na
 \fBSub\fR
 .ad
@@ -503,7 +480,6 @@ Displays sub-volumes, if the specified volume is of RAID 10 or RAID 50 volume.
 
 .sp
 .ne 2
-.mk
 .na
 \fBDisk\fR
 .ad
@@ -514,7 +490,6 @@ Displays all disks that form the specified volume.
 
 .sp
 .ne 2
-.mk
 .na
 \fBStripe Size\fR
 .ad
@@ -525,7 +500,6 @@ Displays the stripe size of the volume.
 
 .sp
 .ne 2
-.mk
 .na
 \fBStatus\fR
 .ad
@@ -541,7 +515,6 @@ can be \fBGOOD\fR, \fBFAILED\fR, or \fBMISSING\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBCache\fR
 .ad
@@ -553,7 +526,6 @@ can be either "\fBON\fR" or "\fBOFF\fR".
 
 .sp
 .ne 2
-.mk
 .na
 \fBRAID level\fR
 .ad
@@ -566,7 +538,6 @@ Displays the RAID level. The RAID level can be either 0, 1, 1E, 5, 10, or 50.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIcontroller ...\fR\fR
 .ad
@@ -576,7 +547,6 @@ Display information about the specified controller(s). The output includes the
 following information:
 .sp
 .ne 2
-.mk
 .na
 \fBController\fR
 .ad
@@ -587,7 +557,6 @@ Displays the RAID controller's ID number.
 
 .sp
 .ne 2
-.mk
 .na
 \fBType\fR
 .ad
@@ -598,7 +567,6 @@ Displays the RAID controller's product type.
 
 .sp
 .ne 2
-.mk
 .na
 \fBfw_version\fR
 .ad
@@ -611,7 +579,6 @@ Displays the controller's firmware version.
 
 .sp
 .ne 2
-.mk
 .na
 \fB[\fB-l\fR]\fR
 .ad
@@ -624,7 +591,6 @@ including all available RAID controllers, RAID volumes, and physical disks. The
 The output includes the following information:
 .sp
 .ne 2
-.mk
 .na
 \fBController\fR
 .ad
@@ -635,7 +601,6 @@ Displays the RAID controller's ID number.
 
 .sp
 .ne 2
-.mk
 .na
 \fBVolume\fR
 .ad
@@ -646,7 +611,6 @@ Displays the logical RAID volume name.
 
 .sp
 .ne 2
-.mk
 .na
 \fBDisk\fR
 .ad
@@ -659,7 +623,6 @@ Displays the RAID disk in \fBC.ID.L\fR expression.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR [\fBvolume\fR | \fBcontroller\fR]\fR
 .ad
@@ -675,7 +638,6 @@ controller.
 The output lists the following information:
 .sp
 .ne 2
-.mk
 .na
 \fBController\fR
 .ad
@@ -687,7 +649,6 @@ double-quotation marks.
 
 .sp
 .ne 2
-.mk
 .na
 \fBVolume\fR
 .ad
@@ -700,7 +661,6 @@ can be either \fBOPTIMAL\fR, \fBDEGRADED\fR, \fBFAILED\fR, or \fBSYNCING\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBDisk\fR
 .ad
@@ -717,7 +677,6 @@ information for the specified volume or controller.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR -g \fIdisk controller\fR\fR
 .ad
@@ -728,7 +687,6 @@ Takes a snapshot of the information for the specified disk.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -1050,7 +1008,6 @@ The following command takes a snapshot about disk 0.1.0 on controller 1:
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -1061,7 +1018,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
@@ -1072,7 +1028,6 @@ Invalid command line input or permission denied.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
@@ -1089,13 +1044,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface Stability Committed
+Interface Stability 	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ramdiskadm.1m b/usr/src/man/man1m/ramdiskadm.1m
index 17c9f9f1e7..0079dbf6e3 100644
--- a/usr/src/man/man1m/ramdiskadm.1m
+++ b/usr/src/man/man1m/ramdiskadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ramdiskadm 1M "25 Mar 2003" "SunOS 5.11" "System Administration Commands"
+.TH RAMDISKADM 1M "Mar 25, 2003"
 .SH NAME
 ramdiskadm \- administer ramdisk pseudo device
 .SH SYNOPSIS
@@ -19,7 +19,7 @@ ramdiskadm \- administer ramdisk pseudo device
 
 .LP
 .nf
-\fB/usr/sbin/ramdiskadm\fR 
+\fB/usr/sbin/ramdiskadm\fR
 .fi
 
 .SH DESCRIPTION
@@ -37,12 +37,10 @@ Ramdisks created using \fBramdiskadm\fR are not persistent across reboots.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIname\fR \fIsize\fR\fR
 .ad
 .RS 16n
-.rt  
 Create a ramdisk named \fIname\fR of size \fIsize\fR and its corresponding
 block and character device nodes.
 .sp
@@ -62,12 +60,10 @@ on standard out.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIname\fR\fR
 .ad
 .RS 16n
-.rt  
 Delete an existing ramdisk of the name \fIname\fR. This command succeeds only
 when the named ramdisk is not open. The associated memory is freed and the
 device nodes are removed.
@@ -113,23 +109,19 @@ Block Device                   Size  Removable
 \fBramdiskadm\fR returns the following exit values:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -141,13 +133,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/rcapadm.1m b/usr/src/man/man1m/rcapadm.1m
index be34913ef8..f52141574c 100644
--- a/usr/src/man/man1m/rcapadm.1m
+++ b/usr/src/man/man1m/rcapadm.1m
@@ -3,18 +3,18 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rcapadm 1M "18 Dec 2006" "SunOS 5.11" "System Administration Commands"
+.TH RCAPADM 1M "Dec 18, 2006"
 .SH NAME
 rcapadm \- configure resource capping daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fBrcapadm\fR 
+\fBrcapadm\fR
 .fi
 
 .LP
 .nf
-\fBrcapadm\fR [ [\fB-n\fR] \fB-E\fR | \fB-D\fR] 
+\fBrcapadm\fR [ [\fB-n\fR] \fB-E\fR | \fB-D\fR]
      [\fB-i\fR \fIinterval=value\fR,...,\fIinterval=value\fR] [\fB-c\fR \fIpercent\fR]
      [\fB-z\fR \fIzonename\fR \fB-m\fR \fImaxvalue\fR]
 .fi
@@ -35,7 +35,6 @@ includes the Process Management profile.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIpercent\fR\fR
 .ad
@@ -49,7 +48,6 @@ default) value is \fB0\fR, which means that memory caps are always enforced.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
@@ -62,7 +60,6 @@ option is not specified and it is currently running.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-E\fR\fR
 .ad
@@ -75,7 +72,6 @@ option is not specified and it is not currently running.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIinterval=value\fR,...,\fIinterval=value\fR\fR
 .ad
@@ -85,36 +81,30 @@ Set intervals for various periodic operations performed by \fBrcapd\fR. All
 intervals are specified in seconds. You can set the following intervals:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBscan\fR\fR
 .ad
 .RS 10n
-.rt  
 The interval at which \fBrcapd\fR scans for new processes. The default scan
 interval is every 15 seconds. The minimum value is 1 second.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsample\fR\fR
 .ad
 .RS 10n
-.rt  
 The interval of process resident set size sampling. The default sample interval
 is every 5 seconds. The minimum value is 1 second.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBreport\fR\fR
 .ad
 .RS 10n
-.rt  
 The interval at which various paging statistics are updated by \fBrcapd\fR, in
 seconds. These statistics can be viewed by using \fBrcapstat\fR(1SRM). The
 default reporting interval is every 5 seconds. When the interval is set to
@@ -130,12 +120,10 @@ from physical memory. \fBrcapd\fR pages out the most infrequently used pages.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconfig\fR\fR
 .ad
 .RS 10n
-.rt  
 The reconfiguration interval, in seconds. At each reconfiguration event,
 \fBrcapd\fR checks its configuration file for updates, and scans the project
 databases for new project caps. The default reconfiguration interval is every
@@ -148,7 +136,6 @@ still be reconfigured by sending it \fBSIGHUP\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fImaxvalue\fR\fR
 .ad
@@ -164,7 +151,6 @@ megabyte; \fBG\fR, gigabyte; and \fBT\fR, terabyte. For example, \fB100M\fR is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -176,7 +162,6 @@ disabling it.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-z\fR \fIzonename\fR\fR
 .ad
@@ -223,36 +208,30 @@ reboot. To set a persistent cap, use \fBzonecfg\fR(1M).
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion. The modifications to the current configuration were
 valid and made successfully.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 An error occurred. A fatal error occurred either in obtaining or modifying the
 resource capping configuration.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Invalid command-line options were specified.
 .RE
 
@@ -264,13 +243,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/rcapd.1m b/usr/src/man/man1m/rcapd.1m
index fb236506f5..dd255abd79 100644
--- a/usr/src/man/man1m/rcapd.1m
+++ b/usr/src/man/man1m/rcapd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rcapd 1M "19 Dec 2006" "SunOS 5.11" "System Administration Commands"
+.TH RCAPD 1M "Dec 19, 2006"
 .SH NAME
 rcapd \- resource cap enforcement daemon
 .SH SYNOPSIS
@@ -34,12 +34,10 @@ In the \fBproject\fR file, caps are defined for projects that have positive
 values for the following project attribute:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrcap.max-rss\fR\fR
 .ad
 .RS 16n
-.rt  
 The total amount of physical memory, in bytes, that is available to the
 project's member processes
 .RE
@@ -64,12 +62,10 @@ to the configuration interval (see \fBrcapadm\fR(1M)).
 The following option is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 6n
-.rt  
 Enable debug mode. Messages are displayed on the invoking user's terminal.
 .RE
 
@@ -94,46 +90,38 @@ foo:100::foo,root::rcap.max-rss=10737418240
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB0\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB1\fR
 .ad
 .RS 5n
-.rt  
 An error occurred.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB2\fR
 .ad
 .RS 5n
-.rt  
 Invalid command-line options were specified.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/project\fR\fR
 .ad
 .RS 16n
-.rt  
 Project database.
 .RE
 
@@ -145,13 +133,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/rctladm.1m b/usr/src/man/man1m/rctladm.1m
index 1f67c60a42..c1b615c5be 100644
--- a/usr/src/man/man1m/rctladm.1m
+++ b/usr/src/man/man1m/rctladm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rctladm 1M "2 Jul 2007" "SunOS 5.11" "System Administration Commands"
+.TH RCTLADM 1M "Jul 2, 2007"
 .SH NAME
 rctladm \- display or modify global state of system resource controls
 .SH SYNOPSIS
@@ -32,7 +32,6 @@ with the \fB-l\fR option. See the description of \fB-l\fR below.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIaction\fR\fR
 .ad
@@ -57,7 +56,6 @@ all \fBrctl\fRs support the \fBsyslog\fR action. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
@@ -70,7 +68,6 @@ specified, only those \fBrctl\fRs matching the names are displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
@@ -86,7 +83,6 @@ Any name operands are ignored.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIname\fR\fR
 .ad
@@ -138,7 +134,6 @@ $
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -149,7 +144,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
@@ -162,7 +156,6 @@ for any other resource controls specified as operands.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
@@ -174,7 +167,6 @@ Invalid command line options were specified.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/rctladm.conf\fR\fR
 .ad
diff --git a/usr/src/man/man1m/rdate.1m b/usr/src/man/man1m/rdate.1m
index ed154cd063..510b5ba1d6 100644
--- a/usr/src/man/man1m/rdate.1m
+++ b/usr/src/man/man1m/rdate.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rdate 1M "16 Mar 2006" "SunOS 5.11" "System Administration Commands"
+.TH RDATE 1M "Mar 16, 2006"
 .SH NAME
 rdate \- set system date from a remote host
 .SH SYNOPSIS
diff --git a/usr/src/man/man1m/reboot.1m b/usr/src/man/man1m/reboot.1m
index 50a4014d0f..1ff92b6f33 100644
--- a/usr/src/man/man1m/reboot.1m
+++ b/usr/src/man/man1m/reboot.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH reboot 1M "24 Aug 2009" "SunOS 5.11" "System Administration Commands"
+.TH REBOOT 1M "Aug 24, 2009"
 .SH NAME
 reboot \- restart the operating system
 .SH SYNOPSIS
@@ -54,7 +54,6 @@ Normally, the system reboots itself at power-up or after crashes.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -66,7 +65,6 @@ information on configuring system crash dumps.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
@@ -77,7 +75,6 @@ If \fB-f\fR is present, reboot to the specified boot environment.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -102,7 +99,6 @@ See \fBEXAMPLES\fR for details.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
@@ -114,7 +110,6 @@ who executed \fBreboot\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -128,7 +123,6 @@ reboot, except if the \fB-d\fR option is also present. If \fB-d\fR is used with
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
@@ -145,7 +139,6 @@ This option is currently available only on x86 systems. The \fB-p\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
@@ -161,7 +154,6 @@ first.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIboot_arguments\fR\fR
 .ad
@@ -360,7 +352,6 @@ example# \fBreboot 2\fR
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/wtmpx\fR\fR
 .ad
diff --git a/usr/src/man/man1m/rem_drv.1m b/usr/src/man/man1m/rem_drv.1m
index a7539a6d2f..2028948a6b 100644
--- a/usr/src/man/man1m/rem_drv.1m
+++ b/usr/src/man/man1m/rem_drv.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rem_drv 1M "13 Aug 2007" "SunOS 5.11" "System Administration Commands"
+.TH REM_DRV 1M "Aug 13, 2007"
 .SH NAME
 rem_drv \- remove a device driver from the system
 .SH SYNOPSIS
@@ -29,7 +29,6 @@ automatically performs a reconfiguration boot (see \fBkernel\fR(1M)).
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR \fIbasedir\fR\fR
 .ad
@@ -51,7 +50,6 @@ zone's file system. See \fBzones\fR(5).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR\fR
 .ad
diff --git a/usr/src/man/man1m/remove_allocatable.1m b/usr/src/man/man1m/remove_allocatable.1m
index 6393bdce56..eb0e5960f5 100644
--- a/usr/src/man/man1m/remove_allocatable.1m
+++ b/usr/src/man/man1m/remove_allocatable.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH remove_allocatable 1M "20 Jul 2007" "SunOS 5.11" "System Administration Commands"
+.TH REMOVE_ALLOCATABLE 1M "Jul 20, 2007"
 .SH NAME
 remove_allocatable \- remove entries from allocation databases
 .SH SYNOPSIS
@@ -30,24 +30,20 @@ the mechanism.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 15n
-.rt  
 Removes  system-supplied  default attributes of the device type that is
 specified with \fB-t\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 15n
-.rt  
 Force the removal of an entry. \fBremove_allocatable\fR exits with an error if
 this option is not specified when an entry with the specified device name no
 longer exists.
@@ -55,23 +51,19 @@ longer exists.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fIname\fR\fR
 .ad
 .RS 15n
-.rt  
 Removes the entry for the device \fIname\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fIdev-type\fR\fR
 .ad
 .RS 15n
-.rt  
 Removes devices of type \fIdev-type\fR.
 .RE
 
@@ -83,46 +75,38 @@ When successful, \fBremove_allocatable\fR returns an exit status of \fB0\fR
 an error. The exit codes are as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Invocation syntax error
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Unknown system error
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 5n
-.rt  
 Device \fIname\fR or \fIdev-type\fR not found. This error occurs only when the
 \fB-f\fR option is not specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR\fR
 .ad
 .RS 5n
-.rt  
 Permission denied. User does not have DAC or MAC access to database.
 .RE
 
@@ -134,13 +118,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.82i) |cw(2.68i) 
-lw(2.82i) |lw(2.68i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/removef.1m b/usr/src/man/man1m/removef.1m
index 2bcc6989df..038e9066af 100644
--- a/usr/src/man/man1m/removef.1m
+++ b/usr/src/man/man1m/removef.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH removef 1M "30 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH REMOVEF 1M "Oct 30, 2007"
 .SH NAME
 removef \- remove a file from software database
 .SH SYNOPSIS
@@ -29,7 +29,6 @@ be safely removed (no other packages have a dependency on them).
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -41,7 +40,6 @@ After all files have been processed, \fBremovef\fR should be invoked with the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR\fR
 .ad
@@ -55,7 +53,6 @@ and earlier releases.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-R\fR \fIroot_path\fR\fR
 .ad
@@ -84,7 +81,6 @@ zone's file system. See \fBzones\fR(5).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR \fIfs_file\fR\fR
 .ad
@@ -101,7 +97,6 @@ file is non-existent or unreliable.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpath\fR\fR
 .ad
@@ -112,7 +107,6 @@ The pathname to be removed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpkginst\fR\fR
 .ad
@@ -153,7 +147,6 @@ variable is set when \fBpkgadd\fR(1M) or \fBpkgrm\fR(1M) is invoked with the
 \fB-R\fR option.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPKG_INSTALL_ROOT\fR\fR
 .ad
@@ -169,7 +162,6 @@ is used.
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -180,7 +172,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
diff --git a/usr/src/man/man1m/repquota.1m b/usr/src/man/man1m/repquota.1m
index cbe494067b..9630b81a8b 100644
--- a/usr/src/man/man1m/repquota.1m
+++ b/usr/src/man/man1m/repquota.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH repquota 1M "16 Sep 1996" "SunOS 5.11" "System Administration Commands"
+.TH REPQUOTA 1M "Sep 16, 1996"
 .SH NAME
 repquota \- summarize quotas for a ufs file system
 .SH SYNOPSIS
@@ -36,24 +36,20 @@ Only the super-user may view quotas which are not their own.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 Report on all mounted ufs file systems that have \fBrq\fR in the  \fBmntopts\fR
 field of the \fB/etc/vfstab\fR file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 Report quotas for all users, even those who do not consume resources.
 .RE
 
diff --git a/usr/src/man/man1m/rmmount.1m b/usr/src/man/man1m/rmmount.1m
index 49eb322328..177262f2eb 100644
--- a/usr/src/man/man1m/rmmount.1m
+++ b/usr/src/man/man1m/rmmount.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rmmount 1M "1 Mar 2007" "SunOS 5.11" "System Administration Commands"
+.TH RMMOUNT 1M "Mar 1, 2007"
 .SH NAME
 rmmount \- removable media mounter for CD-ROM, floppy, Jaz drive, and others
 .SH SYNOPSIS
@@ -30,34 +30,28 @@ one of the locations listed below.
 For a diskette (floppy):
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/floppy/floppy0\fR\fR
 .ad
 .RS 26n
-.rt  
 symbolic link to mounted floppy in local floppy drive
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/floppy/floppy_name\fR\fR
 .ad
 .RS 26n
-.rt  
 mounted named floppy
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/floppy/unnamed_floppy\fR\fR
 .ad
 .RS 26n
-.rt  
 mounted unnamed floppy
 .RE
 
@@ -66,7 +60,6 @@ mounted unnamed floppy
 For a CD-ROM or a DVD-ROM:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/cdrom/cdrom0\fR\fR
 .ad
@@ -77,7 +70,6 @@ symbolic link to mounted \fBCD-ROM\fR in local \fBCD-ROM\fR drive
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/cdrom/CD-ROM_name\fR\fR
 .ad
@@ -88,7 +80,6 @@ mounted named \fBCD-ROM\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/cdrom/CD-ROM_name/partition\fR\fR
 .ad
@@ -99,7 +90,6 @@ mounted named \fBCD-ROM\fR with partitioned file system
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/cdrom/unnamed_cdrom\fR\fR
 .ad
@@ -113,45 +103,37 @@ mounted unnamed \fBCD-ROM\fR
 For a Zip drive:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/rmdisk/zip0\fR\fR
 .ad
 .RS 30n
-.rt  
 symbolic link to mounted Zip medium in local Zip drive
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/rmdisk/\fIZip_name\fR\fR\fR
 .ad
 .RS 30n
-.rt  
 mounted named Zip medium
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/rmdisk/\fIZip_name\fR/partition\fR\fR
 .ad
 .RS 30n
-.rt  
 mounted named Zip medium with partitioned file system
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/rmdisk/unnamed_zip\fR\fR
 .ad
 .RS 30n
-.rt  
 mounted unnamed Zip medium
 .RE
 
@@ -160,45 +142,37 @@ mounted unnamed Zip medium
 For a Jaz drive:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/rmdisk/jaz0\fR\fR
 .ad
 .RS 30n
-.rt  
 symbolic link to mounted Jaz medium in local Jaz drive
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/rmdisk/\fIJaz_name\fR\fR\fR
 .ad
 .RS 30n
-.rt  
 mounted named Jaz medium
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/rmdisk/\fIJaz_name\fR/partition\fR\fR
 .ad
 .RS 30n
-.rt  
 mounted named Jaz medium with partitioned file system
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/rmdisk/unnamed_Jaz\fR\fR
 .ad
 .RS 30n
-.rt  
 mounted unnamed Jaz medium
 .RE
 
@@ -207,7 +181,6 @@ mounted unnamed Jaz medium
 For a generic "rmdisk" drive:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/rmdisk/rmdisk0\fR\fR
 .ad
@@ -218,7 +191,6 @@ symbolic link to mounted removable medium in local removable medium drive
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/rmdisk/\fIrmdisk_name\fR\fR\fR
 .ad
@@ -229,7 +201,6 @@ mounted named removable medium
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/rmdisk/\fIrmdisk_name\fR/partition\fR\fR
 .ad
@@ -240,7 +211,6 @@ mounted named removable medium with partitioned file system
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/rmdisk/unnamed_rmdisk\fR\fR
 .ad
@@ -291,24 +261,20 @@ process), the ejection will fail.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
 .RS 6n
-.rt  
 Turn on the debugging output from the \fBrmmount\fR \fBdprintf\fR calls.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/rmmount/*.so.1\fR\fR
 .ad
 .RS 27n
-.rt  
 shared objects used by \fBrmmount\fR.
 .RE
 
diff --git a/usr/src/man/man1m/rmt.1m b/usr/src/man/man1m/rmt.1m
index 9737b33ddf..82f8614b77 100644
--- a/usr/src/man/man1m/rmt.1m
+++ b/usr/src/man/man1m/rmt.1m
@@ -3,14 +3,14 @@
 .\" of California.  All rights reserved.  The Berkeley software License Agreement
 .\"  specifies the terms and conditions for redistribution.  Copyright (c) 1995
 .\" Sun Microsystems, Inc.  All Rights Reserved.
-.\" from UCB 4.3 
-.TH rmt 1M "6 Nov 2000" "SunOS 5.11" "System Administration Commands"
+.\" from UCB 4.3
+.TH RMT 1M "Nov 6, 2000"
 .SH NAME
 rmt \- remote magtape protocol module
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/rmt\fR 
+\fB/usr/sbin/rmt\fR
 .fi
 
 .SH DESCRIPTION
@@ -36,12 +36,10 @@ have responses of:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBA\fR\fInumber\fR\fB\en\fR\fR
 .ad
 .RS 14n
-.rt  
 where \fInumber\fR is an \fBASCII\fR representation of a decimal number.
 .RE
 
@@ -50,7 +48,6 @@ where \fInumber\fR is an \fBASCII\fR representation of a decimal number.
 Unsuccessful commands are responded to with:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBE\fR\fIerror-number\fR\fB\en\fR\fIerror-message\fR\fB\en\fR\fR
 .ad
@@ -66,12 +63,10 @@ printed from a call to \fBperror\fR(3C).
  The protocol consists of the following commands:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBS\en\fR\fR
 .ad
 .RS 25n
-.rt  
 Return the status of the open device, as obtained with a \fBMTIOCGET\fR
 \fBioctl\fR call.  If the operation was successful, an "ack" is sent with the
 size of the status buffer, then the status buffer is sent (in binary).
@@ -79,23 +74,19 @@ size of the status buffer, then the status buffer is sent (in binary).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBC\fR\fIdevice\fR\fB\en\fR\fR
 .ad
 .RS 25n
-.rt  
 Close the currently open device. The \fIdevice\fR specified is ignored.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBI\fR\fIoperation\fR\fB\en\fR\fIcount\fR\fB\en\fR\fR
 .ad
 .RS 25n
-.rt  
 Perform a \fBMTIOCOP\fR \fBioctl\fR(2) command using the specified parameters.
 The parameters are interpreted as the \fBASCII\fR representations of the
 decimal values to place in the \fImt_op\fR and \fImt_count\fR fields of the
@@ -105,24 +96,20 @@ return value is the \fIcount\fR parameter.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBL\fR\fIoffset\fR\fB\en\fR\fBwhence\fR\fB\en\fR\fR
 .ad
 .RS 25n
-.rt  
 Perform an \fBlseek\fR(2) operation using the specified parameters. The
 response value is returned from the \fBlseek\fR call.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBO\fR\fIdevice\fR\fB\en\fR\fImode\fR\fB\en\fR\fR
 .ad
 .RS 25n
-.rt  
 Open the specified \fIdevice\fR using the indicated \fImode\fR. \fIdevice\fR is
 a full pathname, and \fImode\fR is an \fBASCII\fR representation of a decimal
 number suitable for passing to \fBopen\fR(9E). If a device is already open, it
@@ -131,12 +118,10 @@ is closed before a new open is performed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBR\fR\fIcount\fR\fB\en\fR\fR
 .ad
 .RS 25n
-.rt  
 Read \fIcount\fR bytes of data from the open device. \fBrmt\fR performs the
 requested \fBread\fR(9E) and responds with \fBA\fR\fIcount-read\en\fR if the
 read was successful; otherwise an error in  standard format is returned. If the
@@ -145,12 +130,10 @@ read was successful, the data read is sent.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBW\fR\fIcount\fR\fB\en\fR\fR
 .ad
 .RS 25n
-.rt  
 Write data onto the open device. \fBrmt\fR reads \fIcount\fR bytes from the
 connection, aborting if a premature \fBEOF\fR is encountered. The response
 value is returned from the \fBwrite\fR(9E) call.
diff --git a/usr/src/man/man1m/rmvolmgr.1m b/usr/src/man/man1m/rmvolmgr.1m
index e98a4b2e2c..9eba83e692 100644
--- a/usr/src/man/man1m/rmvolmgr.1m
+++ b/usr/src/man/man1m/rmvolmgr.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rmvolmgr 1M "28 Nov 2006" "SunOS 5.11" "System Administration Commands"
+.TH RMVOLMGR 1M "Nov 28, 2006"
 .SH NAME
 rmvolmgr \- HAL-aware removable volume manager
 .SH SYNOPSIS
@@ -64,45 +64,37 @@ The \fB-c\fR and \fB-n\fR options can also be specified as SMF properties. See
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 6n
-.rt  
 Disable CDE compatibility.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 6n
-.rt  
 Display help information and exit.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 6n
-.rt  
 Do not create legacy mountpoint symbolic links.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 6n
-.rt  
 Invoke in system instance mode.
 .RE
 
@@ -139,13 +131,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityVolatile
+Interface Stability	Volatile
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/roleadd.1m b/usr/src/man/man1m/roleadd.1m
index aa2c7efc4c..6777f9576e 100644
--- a/usr/src/man/man1m/roleadd.1m
+++ b/usr/src/man/man1m/roleadd.1m
@@ -3,22 +3,22 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH roleadd 1M "21 Feb 2006" "SunOS 5.11" "System Administration Commands"
+.TH ROLEADD 1M "Feb 21, 2006"
 .SH NAME
 roleadd \- administer a new role account on the system
 .SH SYNOPSIS
 .LP
 .nf
-\fBroleadd\fR [\fB-c\fR \fIcomment\fR] [\fB-d\fR \fIdir\fR] [\fB-e\fR \fIexpire\fR] [\fB-f\fR \fIinactive\fR] 
-     [\fB-g\fR \fIgroup\fR] [\fB-G\fR \fIgroup\fR [, \fIgroup\fR...]] [\fB-m\fR [\fB-k\fR \fIskel_dir\fR]] 
-     [\fB-u\fR \fIuid\fR [\fB-o\fR]] [\fB-s\fR \fIshell\fR] 
+\fBroleadd\fR [\fB-c\fR \fIcomment\fR] [\fB-d\fR \fIdir\fR] [\fB-e\fR \fIexpire\fR] [\fB-f\fR \fIinactive\fR]
+     [\fB-g\fR \fIgroup\fR] [\fB-G\fR \fIgroup\fR [, \fIgroup\fR...]] [\fB-m\fR [\fB-k\fR \fIskel_dir\fR]]
+     [\fB-u\fR \fIuid\fR [\fB-o\fR]] [\fB-s\fR \fIshell\fR]
      [\fB-A\fR \fIauthorization\fR [,\fIauthorization...\fR]] [\fB-K\fR \fIkey=value\fR] \fIrole\fR
 .fi
 
 .LP
 .nf
-\fBroleadd\fR \fB-D\fR [\fB-b\fR \fIbase_dir\fR] [\fB-e\fR \fIexpire\fR] [\fB-f\fR \fIinactive\fR] 
-     [\fB-g\fR \fIgroup\fR] [\fB-A\fR \fIauthorization\fR [,\fIauthorization...\fR]] 
+\fBroleadd\fR \fB-D\fR [\fB-b\fR \fIbase_dir\fR] [\fB-e\fR \fIexpire\fR] [\fB-f\fR \fIinactive\fR]
+     [\fB-g\fR \fIgroup\fR] [\fB-A\fR \fIauthorization\fR [,\fIauthorization...\fR]]
      [\fB-P\fR \fIprofile\fR [,\fIprofile...\fR] [\fB-K\fR \fIkey=value\fR]]
 .fi
 
@@ -67,12 +67,10 @@ colon (\fB:\fR) or a newline (\fB\en\fR).
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR \fIauthorization\fR\fR
 .ad
 .RS 20n
-.rt  
 One or more comma separated authorizations defined in \fBauth_attr\fR(4). Only
 a user or role who has grant rights to the authorization can assign it to an
 account
@@ -80,12 +78,10 @@ account
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR \fIbase_dir\fR\fR
 .ad
 .RS 20n
-.rt  
 The default base directory for the system if \fB-d\fR\fI dir\fR is not
 specified. \fIbase_dir\fR is concatenated with the account name to define the
 home directory. If the \fB-m\fR option is not used, \fIbase_dir\fR must exist.
@@ -93,24 +89,20 @@ home directory. If the \fB-m\fR option is not used, \fIbase_dir\fR must exist.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcomment\fR\fR
 .ad
 .RS 20n
-.rt  
 Any text string. It is generally a short description of the role. This
 information is stored in the role's \fB/etc/passwd\fR entry.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdir\fR\fR
 .ad
 .RS 20n
-.rt  
 The home directory of the new role. It defaults to
 \fIbase_dir\fR/\fIaccount_name\fR, where \fIbase_dir\fR is the base directory
 for new login home directories and \fIaccount_name\fR is the new role name.
@@ -118,12 +110,10 @@ for new login home directories and \fIaccount_name\fR is the new role name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
 .RS 20n
-.rt  
 Display the default values for \fIgroup\fR, \fIbase_dir\fR, \fIskel_dir\fR,
 \fIshell\fR, \fIinactive\fR, \fIexpire\fR and \fIkey=value\fR pairs. When used
 with the \fB-g\fR, \fB-b\fR, \fB-f\fR, or \fB-K\fR, options, the \fB-D\fR
@@ -131,7 +121,6 @@ option sets the default values for the specified fields. The default values
 are:
 .sp
 .ne 2
-.mk
 .na
 \fBgroup\fR
 .ad
@@ -142,7 +131,6 @@ are:
 
 .sp
 .ne 2
-.mk
 .na
 \fBbase_dir\fR
 .ad
@@ -153,7 +141,6 @@ are:
 
 .sp
 .ne 2
-.mk
 .na
 \fBskel_dir\fR
 .ad
@@ -164,7 +151,6 @@ are:
 
 .sp
 .ne 2
-.mk
 .na
 \fBshell\fR
 .ad
@@ -175,7 +161,6 @@ are:
 
 .sp
 .ne 2
-.mk
 .na
 \fBinactive\fR
 .ad
@@ -186,7 +171,6 @@ are:
 
 .sp
 .ne 2
-.mk
 .na
 \fBexpire\fR
 .ad
@@ -197,7 +181,6 @@ Null
 
 .sp
 .ne 2
-.mk
 .na
 \fBauths\fR
 .ad
@@ -208,7 +191,6 @@ Null
 
 .sp
 .ne 2
-.mk
 .na
 \fBprofiles\fR
 .ad
@@ -219,7 +201,6 @@ Null
 
 .sp
 .ne 2
-.mk
 .na
 \fBkey=value (pairs defined in \fBuser_attr\fR(4)\fR
 .ad
@@ -232,12 +213,10 @@ not present
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIexpire\fR\fR
 .ad
 .RS 20n
-.rt  
 Specify the expiration date for a role. After this date, no user is able to
 access this role. The expire option argument is a date entered using one of the
 date formats included in the template file \fB/etc/datemsk\fR. See
@@ -251,12 +230,10 @@ creating temporary roles.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIinactive\fR\fR
 .ad
 .RS 20n
-.rt  
 The maximum number of days allowed between uses of a role ID before that ID is
 declared invalid. Normal values are positive integers. A value of \fB 0\fR
 defeats the status.
@@ -264,12 +241,10 @@ defeats the status.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR \fIgroup\fR\fR
 .ad
 .RS 20n
-.rt  
 An existing group's integer ID or character-string name. Without the \fB-D\fR
 option, it defines the new role's primary group membership and defaults to the
 default group. You can reset this default value by invoking \fBroleadd
@@ -278,12 +253,10 @@ default group. You can reset this default value by invoking \fBroleadd
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-G\fR \fIgroup\fR\fR
 .ad
 .RS 20n
-.rt  
 An existing group's integer \fBID\fR or character-string name. It defines the
 new role's supplementary group membership. Duplicates between \fIgroup\fR with
 the \fB-g\fR and \fB-G\fR options are ignored. No more than \fBNGROUPS_MAX\fR
@@ -292,12 +265,10 @@ groups can be specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR \fIskel_dir\fR\fR
 .ad
 .RS 20n
-.rt  
 A directory that contains skeleton information (such as \fB\&.profile\fR) that
 can be copied into a new role's home directory. This directory must already
 exist. The system provides the \fB/etc/skel\fR directory that can be used for
@@ -306,12 +277,10 @@ this purpose.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-K\fR \fIkey=value\fR\fR
 .ad
 .RS 20n
-.rt  
 A \fIkey=value\fR pair to add to the role's attributes. Multiple \fB-K\fR
 options can be used to add multiple \fIkey=value\fR pairs. The generic \fB-K\fR
 option with the appropriate key can be used instead of the specific implied key
@@ -322,12 +291,10 @@ can not be repeated.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
 .RS 20n
-.rt  
 Create the new role's home directory if it does not already exist. If the
 directory already exists, it must have read, write, and execute permissions by
 \fIgroup\fR, where \fIgroup\fR is the role's primary group.
@@ -335,34 +302,28 @@ directory already exists, it must have read, write, and execute permissions by
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 20n
-.rt  
 This option allows a \fBUID\fR to be duplicated (non-unique).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIprofile\fR\fR
 .ad
 .RS 20n
-.rt  
 One or more comma-separated execution profiles defined in \fBprof_attr\fR(4).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIshell\fR\fR
 .ad
 .RS 20n
-.rt  
 Full pathname of the program used as the user's shell on login. It defaults to
 an empty field causing the system to use \fB/bin/pfsh\fR as the default. The
 value of \fIshell\fR must be a valid executable file.
@@ -370,12 +331,10 @@ value of \fIshell\fR must be a valid executable file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIuid\fR\fR
 .ad
 .RS 20n
-.rt  
 The \fBUID\fR of the new role. This \fBUID\fR must be a non-negative decimal
 integer below \fBMAXUID\fR as defined in \fB<sys/param.h>\fR\&. The \fBUID\fR
 defaults to the next available (unique) number above the highest number
@@ -414,13 +373,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
@@ -454,7 +412,7 @@ is not unique:
 .sp
 .in +2
 .nf
-UX: roleadd: ERROR: uid \fIuid\fR is already in use. Choose another. 
+UX: roleadd: ERROR: uid \fIuid\fR is already in use. Choose another.
 .fi
 .in -2
 .sp
@@ -466,7 +424,7 @@ is already in use:
 .sp
 .in +2
 .nf
-UX: roleadd: ERROR: group \fIgroup\fR does not exist. Choose another. 
+UX: roleadd: ERROR: group \fIgroup\fR does not exist. Choose another.
 .fi
 .in -2
 .sp
diff --git a/usr/src/man/man1m/roledel.1m b/usr/src/man/man1m/roledel.1m
index 82e6cd0096..197b149830 100644
--- a/usr/src/man/man1m/roledel.1m
+++ b/usr/src/man/man1m/roledel.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH roledel 1M "8 Sep 1999" "SunOS 5.11" "System Administration Commands"
+.TH ROLEDEL 1M "Sep 8, 1999"
 .SH NAME
 roledel \- delete a role's login from the system
 .SH SYNOPSIS
@@ -24,12 +24,10 @@ appropriate account-related changes to the system file and file system.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 6n
-.rt  
 Remove the role's home directory from the system. This directory must exist.
 The files and directories under the home directory will no longer be accessible
 following successful execution of the command.
@@ -41,12 +39,10 @@ following successful execution of the command.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIrole\fR\fR
 .ad
 .RS 8n
-.rt  
 An existing role name to be deleted.
 .RE
 
@@ -56,114 +52,94 @@ An existing role name to be deleted.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 6n
-.rt  
 Invalid command syntax. A usage message for the \fBroledel\fR command is
 displayed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB6\fR\fR
 .ad
 .RS 6n
-.rt  
 The account to be removed does not exist.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB8\fR\fR
 .ad
 .RS 6n
-.rt  
 The account to be removed is in use.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB10\fR\fR
 .ad
 .RS 6n
-.rt  
 Cannot update the \fB/etc/group\fR or \fB/etc/user_attr\fR file but the login
 is removed from the \fB/etc/passwd\fR file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB12\fR\fR
 .ad
 .RS 6n
-.rt  
 Cannot remove or otherwise modify the home directory.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/passwd\fR\fR
 .ad
 .RS 18n
-.rt  
 system password file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/shadow\fR\fR
 .ad
 .RS 18n
-.rt  
 system file containing roles' encrypted passwords and related information
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/group\fR\fR
 .ad
 .RS 18n
-.rt  
 system file containing group definitions
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/user_attr\fR\fR
 .ad
 .RS 18n
-.rt  
 system file containing additional role attributes
 .RE
 
diff --git a/usr/src/man/man1m/rolemod.1m b/usr/src/man/man1m/rolemod.1m
index f4e2712ab6..9e557af646 100644
--- a/usr/src/man/man1m/rolemod.1m
+++ b/usr/src/man/man1m/rolemod.1m
@@ -3,16 +3,16 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rolemod 1M "10 Dec 2008" "SunOS 5.11" "System Administration Commands"
+.TH ROLEMOD 1M "Dec 10, 2008"
 .SH NAME
 rolemod \- modify a role's login information on the system
 .SH SYNOPSIS
 .LP
 .nf
-\fBrolemod\fR [\fB-u\fR \fIuid\fR [\fB-o\fR]] [\fB-g\fR \fIgroup\fR] [\fB-G\fR \fIgroup\fR [, \fIgroup\fR...]] 
-     [\fB-d\fR \fIdir\fR [\fB-m\fR]] [\fB-s\fR \fIshell\fR] [\fB-c\fR \fIcomment\fR] [\fB-l\fR \fInew_name\fR] 
-     [\fB-f\fR \fIinactive\fR] [\fB-e\fR \fIexpire\fR] 
-     [\fB-A\fR \fIauthorization\fR [, \fIauthorization\fR]] 
+\fBrolemod\fR [\fB-u\fR \fIuid\fR [\fB-o\fR]] [\fB-g\fR \fIgroup\fR] [\fB-G\fR \fIgroup\fR [, \fIgroup\fR...]]
+     [\fB-d\fR \fIdir\fR [\fB-m\fR]] [\fB-s\fR \fIshell\fR] [\fB-c\fR \fIcomment\fR] [\fB-l\fR \fInew_name\fR]
+     [\fB-f\fR \fIinactive\fR] [\fB-e\fR \fIexpire\fR]
+     [\fB-A\fR \fIauthorization\fR [, \fIauthorization\fR]]
      [\fB-P\fR \fIprofile\fR [, \fIprofile\fR]] [\fB-K\fR \fIkey=value\fR] \fIrole\fR
 .fi
 
@@ -33,7 +33,6 @@ this limit.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR \fIauthorization\fR\fR
 .ad
@@ -47,7 +46,6 @@ authorization list is specified, the existing setting is removed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcomment\fR\fR
 .ad
@@ -61,7 +59,6 @@ entry.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdir\fR\fR
 .ad
@@ -74,7 +71,6 @@ home directories, and \fBlogin\fR is the new login.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIexpire\fR\fR
 .ad
@@ -91,7 +87,6 @@ For example, you may enter \fB10/6/90\fR or \fBOctober 6, 1990\fR. A value of
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIinactive\fR\fR
 .ad
@@ -104,7 +99,6 @@ integers. A value of \fB0\fR defeats the status.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR \fIgroup\fR\fR
 .ad
@@ -116,7 +110,6 @@ redefines the role's primary group membership.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-G\fR \fIgroup\fR\fR
 .ad
@@ -130,7 +123,6 @@ groups may be specified as defined in \fB<param.h>\fR\&.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-K\fR \fIkey=value\fR\fR
 .ad
@@ -151,7 +143,6 @@ user.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fInew_logname\fR\fR
 .ad
@@ -170,7 +161,6 @@ character and must not contain a colon (\fB:\fR) or \fBNEWLINE\fR (\fB\en\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
@@ -184,7 +174,6 @@ group.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
@@ -195,7 +184,6 @@ This option allows the specified \fBUID\fR to be duplicated (non-unique).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIprofile\fR\fR
 .ad
@@ -208,7 +196,6 @@ the existing setting is removed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIshell\fR\fR
 .ad
@@ -220,7 +207,6 @@ login. The value of \fIshell\fR must be a valid executable file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIuid\fR\fR
 .ad
@@ -239,7 +225,6 @@ manually reassigned using \fBchown\fR(1).
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlogin\fR\fR
 .ad
@@ -255,7 +240,6 @@ In case of an error, \fBrolemod\fR prints an error message and exits with one
 of the following values:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
@@ -267,7 +251,6 @@ is displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
@@ -278,7 +261,6 @@ An invalid argument was provided to an option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR\fR
 .ad
@@ -289,7 +271,6 @@ The \fIuid\fR given with the \fB-u\fR option is already in use.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB5\fR\fR
 .ad
@@ -301,7 +282,6 @@ possible errors. See \fBpasswd\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB6\fR\fR
 .ad
@@ -313,7 +293,6 @@ login shell does not exist.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB8\fR\fR
 .ad
@@ -324,7 +303,6 @@ The login to be modified is in use.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB9\fR\fR
 .ad
@@ -335,7 +313,6 @@ The \fInew_logname\fR is already in use.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB10\fR\fR
 .ad
@@ -347,7 +324,6 @@ requests will be implemented.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB11\fR\fR
 .ad
@@ -359,7 +335,6 @@ requests will be implemented.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB12\fR\fR
 .ad
@@ -371,7 +346,6 @@ Unable to complete the move of the home directory to the new home directory.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/group\fR\fR
 .ad
@@ -382,7 +356,6 @@ system file containing group definitions
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/datemsk\fR\fR
 .ad
@@ -393,7 +366,6 @@ system file of date formats
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/passwd\fR\fR
 .ad
@@ -404,7 +376,6 @@ system password file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/shadow\fR\fR
 .ad
@@ -416,7 +387,6 @@ information
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/user_attr\fR\fR
 .ad
@@ -433,13 +403,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/root_archive.1m b/usr/src/man/man1m/root_archive.1m
index 7339e33827..ec30a07b35 100644
--- a/usr/src/man/man1m/root_archive.1m
+++ b/usr/src/man/man1m/root_archive.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH root_archive 1M "9 Sep 2009" "SunOS 5.11" "System Administration Commands"
+.TH ROOT_ARCHIVE 1M "Sep 9, 2009"
 .SH NAME
 root_archive \- manage bootable miniroot archives
 .SH SYNOPSIS
@@ -52,18 +52,15 @@ system running the same release for which the miniroot is intended to install.
 The \fBroot_archive\fR command has the following subcommands:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpack\fR \fIarchive\fR \fIroot\fR\fR
 .ad
 .RS 21n
-.rt  
 Pack the contents of the root directory into the boot archive \fIarchive\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunpack\fR \fIarchive\fR \fIroot\fR\fR
 .ad
@@ -75,7 +72,6 @@ named \fIroot\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpackmedia\fR \fIsolaris_image\fR \fIroot\fR\fR
 .ad
@@ -87,7 +83,6 @@ directory named \fIroot\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunpackmedia\fR \fIsolaris_image\fR \fIroot\fR\fR
 .ad
@@ -149,23 +144,19 @@ the contents of the directory \fB/export/release/latest/root\fR.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 The command completed successfully.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 The command exited due to an error.
 .RE
 
@@ -177,13 +168,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/route.1m b/usr/src/man/man1m/route.1m
index 2bff52cd89..711eea3637 100644
--- a/usr/src/man/man1m/route.1m
+++ b/usr/src/man/man1m/route.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH route 1M "3 Feb 2009" "SunOS 5.11" "System Administration Commands"
+.TH ROUTE 1M "Feb 3, 2009"
 .SH NAME
 route \- manually manipulate the routing tables
 .SH SYNOPSIS
@@ -14,13 +14,13 @@ route \- manually manipulate the routing tables
 
 .LP
 .nf
-\fBroute\fR [\fB-fnvq\fR] [\fB-p\fR [\fB-R\fR \fIroot-dir\fR]] add | delete [\fImodifiers\fR] \fIdestination\fR \fIgateway\fR 
+\fBroute\fR [\fB-fnvq\fR] [\fB-p\fR [\fB-R\fR \fIroot-dir\fR]] add | delete [\fImodifiers\fR] \fIdestination\fR \fIgateway\fR
      [\fIargs\fR]
 .fi
 
 .LP
 .nf
-\fBroute\fR [\fB-fnvq\fR] change | get [\fImodifiers\fR] \fIdestination\fR 
+\fBroute\fR [\fB-fnvq\fR] change | get [\fImodifiers\fR] \fIdestination\fR
      [\fIgateway\fR [\fIargs\fR]]
 .fi
 
@@ -59,12 +59,10 @@ non-privileged users.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 15n
-.rt  
 Flush the routing tables of all gateway entries. If you use the \fB-f\fR option
 in conjunction with any of the \fBroute\fR sub-commands, \fBroute\fR flushes
 the gateways before performing the sub-command. Specify the table to flush by
@@ -74,24 +72,20 @@ option. If unspecified, flushing IPv4 (\fBinet\fR) routes is the default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 15n
-.rt  
 Prevent attempts to print host and network names symbolically when reporting
 actions. This option is useful when name servers are unavailable.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 15n
-.rt  
 Make changes to the network route tables persistent across system restarts. The
 operation is applied to the network routing tables first and, if successful, is
 then applied to the list of saved routes used at system startup. In determining
@@ -104,23 +98,19 @@ routes are added at startup.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
 .RS 15n
-.rt  
 Suppress all output.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR\fR
 .ad
 .RS 15n
-.rt  
 Specify an alternate root directory where \fBroute\fR applies changes. This
 option is ignored unless used in conjunction with the \fB-p\fR option. When
 \fB-R\fR is specified, route changes are applied only to the list of saved
@@ -133,12 +123,10 @@ than \fB/\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 15n
-.rt  
 Print additional details in verbose mode.
 .RE
 
@@ -148,79 +136,65 @@ Print additional details in verbose mode.
 The following subcommands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadd\fR\fR
 .ad
 .RS 11n
-.rt  
 Add a route.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBchange\fR\fR
 .ad
 .RS 11n
-.rt  
 Change aspects of a route (such as its gateway).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelete\fR\fR
 .ad
 .RS 11n
-.rt  
 Delete a specific route.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBflush\fR\fR
 .ad
 .RS 11n
-.rt  
 Remove all gateway entries from the routing table.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBget\fR\fR
 .ad
 .RS 11n
-.rt  
 Look up and display the route for a destination.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmonitor\fR\fR
 .ad
 .RS 11n
-.rt  
 Continuously report any changes to the routing information base, routing lookup
 misses, or suspected network partitionings.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshow\fR\fR
 .ad
 .RS 11n
-.rt  
 Display the list of routes to be applied at system startup. Can be used only in
 conjunction with the \fB-p\fR option.
 .RE
@@ -291,24 +265,20 @@ how the \fBroute\fR sub-command interprets it.
 The following modifiers are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-inet\fR\fR
 .ad
 .RS 10n
-.rt  
 Force the address to be interpreted as an IPv4 address, that is, under the
 \fBAF_INET\fR address family.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-inet6\fR\fR
 .ad
 .RS 10n
-.rt  
 Force the address to be interpreted as an IPv6 address, that is, under the
 \fBAF_INET6\fR address family.
 .RE
@@ -326,23 +296,19 @@ a network; otherwise, it is presumed to be a route to a host.
 You can force this selection by using one of the following modifiers:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-host\fR\fR
 .ad
 .RS 9n
-.rt  
 Force the destination to be interpreted as a host.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-net\fR\fR
 .ad
 .RS 9n
-.rt  
 Force the destination to be interpreted as a network.
 .RE
 
@@ -353,16 +319,14 @@ For example:
 
 .sp
 .TS
-tab();
-cw(2.75i) cw(2.75i) 
-lw(2.75i) lw(2.75i) 
-.
-DestinationDestination Equivalent
+c c
+l l .
+Destination	Destination Equivalent
 _
-\fB128.32\fR\fB-host\fR \fB128.0.0.32\fR
-\fB128.32.130\fR\fB-host\fR \fB128.32.0.130\fR
-\fB-net\fR \fB128.32\fR\fB128.32.0.0\fR
-\fB-net\fR \fB128.32.130\fR\fB\fR\fB128.32.130.0\fR
+\fB128.32\fR	\fB-host\fR \fB128.0.0.32\fR
+\fB128.32.130\fR	\fB-host\fR \fB128.32.0.130\fR
+\fB-net\fR \fB128.32\fR	\fB128.32.0.0\fR
+\fB-net\fR \fB128.32.130\fR	\fB\fR\fB128.32.130.0\fR
 .TE
 
 .sp
@@ -405,7 +369,7 @@ also be specified by placing a \fB0\fR after the gateway address:
 .sp
 .in +2
 .nf
-example# route add default \fIhostname\fR 0 
+example# route add default \fIhostname\fR 0
 .fi
 .in -2
 .sp
@@ -494,25 +458,23 @@ on the command line:
 
 .sp
 .TS
-tab();
-cw(1.32i) cw(1.24i) cw(2.94i) 
-lw(1.32i) lw(1.24i) lw(2.94i) 
-.
-ModifierFlagDescription
+c c c
+l l l .
+Modifier	Flag	Description
 _
-\fB-interface\fR\fB~RTF_GATEWAY\fRDestination is directly reachable 
-\fB-iface\fR\fB~RTF_GATEWAY\fRAlias for interface modifier
-\fB-static\fR\fBRTF_STATIC\fRManually added route
-\fB-nostatic\fR\fB~RTF_STATIC\fRT{
+\fB-interface\fR	\fB~RTF_GATEWAY\fR	Destination is directly reachable
+\fB-iface\fR	\fB~RTF_GATEWAY\fR	Alias for interface modifier
+\fB-static\fR	\fBRTF_STATIC\fR	Manually added route
+\fB-nostatic\fR	\fB~RTF_STATIC\fR	T{
 Pretend route was added by kernel or routing daemon
 T}
-\fB-reject\fR\fBRTF_REJECT\fREmit an ICMP unreachable when matched
-\fB-blackhole\fR\fBRTF_BLACKHOLE\fRSilently discard packets duing updates
-\fB-proto1\fR\fBRTF_PROTO1\fRSet protocol specific routing flag #1
-\fB-proto2\fR\fBRTF_PROTO2\fRSet protocol specific routing flag #2
-\fB-private\fR\fBRTF_PRIVATE\fRDo not advertise this route
-\fB-multirt\fR\fBRTF_MULTIRT\fRCreates the specified redundant route
-\fB-setsrc\fR\fBRTF_SETSRC\fRAssigns the default source address
+\fB-reject\fR	\fBRTF_REJECT\fR	Emit an ICMP unreachable when matched
+\fB-blackhole\fR	\fBRTF_BLACKHOLE\fR	Silently discard packets duing updates
+\fB-proto1\fR	\fBRTF_PROTO1\fR	Set protocol specific routing flag #1
+\fB-proto2\fR	\fBRTF_PROTO2\fR	Set protocol specific routing flag #2
+\fB-private\fR	\fBRTF_PRIVATE\fR	Do not advertise this route
+\fB-multirt\fR	\fBRTF_MULTIRT\fR	Creates the specified redundant route
+\fB-setsrc\fR	\fBRTF_SETSRC\fR	Assigns the default source address
 .TE
 
 .sp
@@ -530,100 +492,82 @@ Some transport layer protocols can support only some of these metrics. The
 following optional modifiers are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-expire\fR\fR
 .ad
 .RS 13n
-.rt  
 Lifetime for the entry. This optional modifier is not currently supported.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-hopcount\fR\fR
 .ad
 .RS 13n
-.rt  
 Maximum hop count. This optional modifier is not currently supported.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-mtu\fR\fR
 .ad
 .RS 13n
-.rt  
 Maximum MTU in bytes.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-recvpipe\fR\fR
 .ad
 .RS 13n
-.rt  
 Receive pipe size in bytes.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-rtt\fR\fR
 .ad
 .RS 13n
-.rt  
 Round trip time in microseconds.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-rttvar\fR\fR
 .ad
 .RS 13n
-.rt  
 Round trip time variance in microseconds.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-sendpipe\fR\fR
 .ad
 .RS 13n
-.rt  
 Send pipe size in bytes.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-ssthresh\fR\fR
 .ad
 .RS 13n
-.rt  
 Send pipe size threshold in bytes.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-secattr\fR\fR
 .ad
 .RS 13n
-.rt  
 Security attributes of the route. This modifier is available only if the system
 is configured with the Solaris Trusted Extensions feature.
 .sp
@@ -673,14 +617,12 @@ but have no effect.
 
 .sp
 .TS
-tab();
-cw(2.84i) cw(2.66i) 
-lw(2.84i) lw(2.66i) 
-.
-ModifierFlag
+c c
+l l .
+Modifier	Flag
 _
-\fB-cloning\fRRTF_CLONING
-\fB-xresolve\fRRTF_XRESOLVE
+\fB-cloning\fR	RTF_CLONING
+\fB-xresolve\fR	RTF_XRESOLVE
 .TE
 
 .sp
@@ -690,34 +632,28 @@ effect.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/defaultrouter\fR\fR
 .ad
 .RS 22n
-.rt  
 List of default routers
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/hosts\fR\fR
 .ad
 .RS 22n
-.rt  
 List of host names and net addresses
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/networks\fR\fR
 .ad
 .RS 22n
-.rt  
 List of network names and addresses
 .RE
 
@@ -732,7 +668,6 @@ List of network names and addresses
 .SH DIAGNOSTICS
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadd\fR [ \fBhost\fR\||\ \fBnetwork\|]\fR \fIdestination\fR:\fIgateway\fR
 \fIflags\fR\fR
@@ -748,7 +683,6 @@ as well as symbolically.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelete\fR [ \fBhost\fR\||\ \fBnetwork\fR\|]
 \fIdestination\fR:\fIgateway\fR \fIflags\fR\fR
@@ -765,7 +699,6 @@ As \fBadd\fR, but when deleting or changing an entry.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdestination\fR \fBdone\fR\fR
 .ad
@@ -777,7 +710,6 @@ each routing table entry deleted is indicated with a message of this form.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNetwork is unreachable\fR\fR
 .ad
@@ -789,7 +721,6 @@ directly-connected network. Give the next-hop gateway instead.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnot in table\fR\fR
 .ad
@@ -800,7 +731,6 @@ A \fBdelete\fR operation was attempted for an entry that is not in the table.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBentry exists\fR\fR
 .ad
@@ -812,7 +742,6 @@ kernel.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrouting table overflow\fR\fR
 .ad
@@ -824,7 +753,6 @@ create the new entry.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinsufficient privileges\fR\fR
 .ad
diff --git a/usr/src/man/man1m/routeadm.1m b/usr/src/man/man1m/routeadm.1m
index 06a6591f5e..04bdc4eefe 100644
--- a/usr/src/man/man1m/routeadm.1m
+++ b/usr/src/man/man1m/routeadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH routeadm 1M "18 Jul 2007" "SunOS 5.11" "System Administration Commands"
+.TH ROUTEADM 1M "Jul 18, 2007"
 .SH NAME
 routeadm \- IP forwarding and routing configuration
 .SH SYNOPSIS
@@ -85,7 +85,6 @@ The first usage, in the SYNOPSIS above, reports the current configuration.
 The following command-line options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR [\fIoption\fR]\fR
 .ad
@@ -97,7 +96,6 @@ the configuration for the specified option or variable is displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot-dir\fR\fR
 .ad
@@ -119,7 +117,6 @@ zone's file system. See \fBzones\fR(5).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIoption\fR...\fR
 .ad
@@ -134,7 +131,6 @@ when \fBrouteadm\fR \fB-u\fR is run.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIoption\fR...\fR
 .ad
@@ -149,7 +145,6 @@ or when \fBrouteadm\fR \fB-u\fR is run.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIfmri\fR\fR
 .ad
@@ -161,7 +156,6 @@ routing daemon service.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fIfmri\fR\ \fIkey\fR=\fIvalue\fR\fR
 .ad
@@ -175,7 +169,6 @@ operation, and each associated value will be added.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIoption...\fR\fR
 .ad
@@ -187,7 +180,6 @@ specified in the description of each \fIoption\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
@@ -205,7 +197,6 @@ enabling of the appropriate service.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIkey\fR=\fIvalue\fR\fR
 .ad
@@ -216,7 +207,6 @@ intervening spaces. If invalid options are specified, a warning message is
 displayed and the program exits. The following variables can be specified:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrouting-svcs=\fR\fIfmrilist\fR\fR
 .ad
@@ -231,7 +221,6 @@ Default: \fBroute:default ripng:default\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipv4-routing-daemon=\fI<full_path_to_routing_daemon>\fR\fR\fR
 .ad
@@ -246,7 +235,6 @@ service at enable time. Default: \fB""\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipv4-routing-daemon-args=\fI<args>\fR\fR\fR
 .ad
@@ -258,7 +246,6 @@ when \fBipv4-routing\fR is enabled. Default: no arguments
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipv4-routing-stop-cmd=\fI<command>\fR\fR\fR
 .ad
@@ -272,7 +259,6 @@ shell-script, or a string that can be parsed by \fBsystem\fR(3C). Default:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipv6-routing-daemon=\fI<full_path_to_routing_daemon>\fR\fR\fR
 .ad
@@ -287,7 +273,6 @@ service at enable time. Default: \fB""\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipv6-routing-daemon-args=\fI<args>\fR\fR\fR
 .ad
@@ -299,7 +284,6 @@ when \fBipv6-routing\fR is enabled. Default: \fB""\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipv6-routing-stop-cmd=\fI<command>\fR\fR\fR
 .ad
@@ -325,7 +309,6 @@ Use the following options as arguments to the \fB-e\fR, \fB-d\fR, and \fB-r\fR
 options (shown above as \fIoption...\fR).
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipv4-forwarding\fR\fR
 .ad
@@ -344,7 +327,6 @@ should specify a dependency on this service.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipv4-routing\fR\fR
 .ad
@@ -365,7 +347,6 @@ default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipv6-forwarding\fR\fR
 .ad
@@ -384,7 +365,6 @@ service.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBipv6-routing\fR\fR
 .ad
@@ -526,35 +506,29 @@ daemon behavior.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 7n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB!=0\fR\fR
 .ad
 .RS 7n
-.rt  
 An error occurred while obtaining or modifying the system configuration.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/routing.conf\fR\fR
 .ad
 .RS 26n
-.rt  
 Parameters for IP forwarding and routing. (Not to be edited.)
 .RE
 
@@ -566,13 +540,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/rpc.bootparamd.1m b/usr/src/man/man1m/rpc.bootparamd.1m
index 0be6c4bfba..11db1461e2 100644
--- a/usr/src/man/man1m/rpc.bootparamd.1m
+++ b/usr/src/man/man1m/rpc.bootparamd.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rpc.bootparamd 1M "1 Aug 2004" "SunOS 5.11" "System Administration Commands"
+.TH RPC.BOOTPARAMD 1M "Aug 1, 2004"
 .SH NAME
 rpc.bootparamd, bootparamd \- boot parameter server
 .SH SYNOPSIS
@@ -30,35 +30,29 @@ process).
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 6n
-.rt  
 Display debugging information.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/bootparams\fR\fR
 .ad
 .RS 22n
-.rt  
 boot parameter data base
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/nsswitch.conf\fR\fR
 .ad
 .RS 22n
-.rt  
 configuration file for the name-service switch
 .RE
 
diff --git a/usr/src/man/man1m/rpc.mdcommd.1m b/usr/src/man/man1m/rpc.mdcommd.1m
index 0b502f4bd6..32a1cb5d72 100644
--- a/usr/src/man/man1m/rpc.mdcommd.1m
+++ b/usr/src/man/man1m/rpc.mdcommd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rpc.mdcommd 1M "29 Oct 2004" "SunOS 5.11" "System Administration Commands"
+.TH RPC.MDCOMMD 1M "Oct 29, 2004"
 .SH NAME
 rpc.mdcommd \- multi-node disk set services
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/rpc.mdcommd\fR 
+\fB/usr/sbin/rpc.mdcommd\fR
 .fi
 
 .SH DESCRIPTION
@@ -27,23 +27,19 @@ multi-node disk set configuration.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR \fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -55,13 +51,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-StabilityEvolving
+Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/rpc.metad.1m b/usr/src/man/man1m/rpc.metad.1m
index f76b732ccf..352c34d728 100644
--- a/usr/src/man/man1m/rpc.metad.1m
+++ b/usr/src/man/man1m/rpc.metad.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rpc.metad 1M "4 Nov 2004" "SunOS 5.11" "System Administration Commands"
+.TH RPC.METAD 1M "Nov 4, 2004"
 .SH NAME
 rpc.metad \- remote metaset services
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/rpc.metad\fR 
+\fB/usr/sbin/rpc.metad\fR
 .fi
 
 .SH DESCRIPTION
@@ -24,23 +24,19 @@ that is used to manage local copies of metadevice diskset information. The
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
diff --git a/usr/src/man/man1m/rpc.metamedd.1m b/usr/src/man/man1m/rpc.metamedd.1m
index 2f2bd26298..e6f91b596d 100644
--- a/usr/src/man/man1m/rpc.metamedd.1m
+++ b/usr/src/man/man1m/rpc.metamedd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rpc.metamedd 1M "4 Nov 2004" "SunOS 5.11" "System Administration Commands"
+.TH RPC.METAMEDD 1M "Nov 4, 2004"
 .SH NAME
 rpc.metamedd \- remote mediator services
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/rpc.metamedd\fR 
+\fB/usr/sbin/rpc.metamedd\fR
 .fi
 
 .SH DESCRIPTION
@@ -24,23 +24,19 @@ daemon is controlled by \fBinetadm\fR(1M).
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -52,12 +48,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-lw(2.75i) lw(2.75i) 
-lw(2.75i) lw(2.75i) 
-.
-\fBATTRIBUTE TYPE\fR\fBATTRIBUTE VALUE\fR
-Interface StabilityEvolving
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
+_
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/rpc.metamhd.1m b/usr/src/man/man1m/rpc.metamhd.1m
index 438cc127d6..e89788270c 100644
--- a/usr/src/man/man1m/rpc.metamhd.1m
+++ b/usr/src/man/man1m/rpc.metamhd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rpc.metamhd 1M "4 Nov 2004" "SunOS 5.11" "System Administration Commands"
+.TH RPC.METAMHD 1M "Nov 4, 2004"
 .SH NAME
 rpc.metamhd \- remote multihost disk services
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/rpc.metamhd\fR 
+\fB/usr/sbin/rpc.metamhd\fR
 .fi
 
 .SH DESCRIPTION
@@ -24,23 +24,19 @@ controlled by \fBinetadm\fR(1M).
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
diff --git a/usr/src/man/man1m/rpc.rexd.1m b/usr/src/man/man1m/rpc.rexd.1m
index 9d902ae191..e4178e9bad 100644
--- a/usr/src/man/man1m/rpc.rexd.1m
+++ b/usr/src/man/man1m/rpc.rexd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rpc.rexd 1M "5 Nov 2004" "SunOS 5.11" "System Administration Commands"
+.TH RPC.REXD 1M "Nov 5, 2004"
 .SH NAME
 rpc.rexd, rexd \- RPC-based remote execution server
 .SH SYNOPSIS
@@ -35,12 +35,10 @@ the sending to the receiving system.
 The following option is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 6n
-.rt  
 Secure. When specified, requests must have valid \fBDES\fR credentials. If the
 request does not have a \fBDES\fR credential it is rejected. The default
 publickey credential is rejected. Only newer \fBon\fR(1) commands send
@@ -80,34 +78,28 @@ determine whether the given user is a legal user.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/pts\fIn\fR\fR\fR
 .ad
 .RS 23n
-.rt  
 Pseudo-terminals used for interactive mode
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/passwd\fR\fR
 .ad
 .RS 23n
-.rt  
 Authorized users
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/tmp_rex/rexd??????\fR\fR
 .ad
 .RS 23n
-.rt  
 Temporary mount points for remote file systems
 .RE
 
diff --git a/usr/src/man/man1m/rpc.rstatd.1m b/usr/src/man/man1m/rpc.rstatd.1m
index 4d6d6888e1..8ed114845b 100644
--- a/usr/src/man/man1m/rpc.rstatd.1m
+++ b/usr/src/man/man1m/rpc.rstatd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rpc.rstatd 1M "4 Nov 2004" "SunOS 5.11" "System Administration Commands"
+.TH RPC.RSTATD 1M "Nov 4, 2004"
 .SH NAME
 rpc.rstatd, rstatd \- kernel statistics server
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/netsvc/rstat/rpc.rstatd\fR 
+\fB/usr/lib/netsvc/rstat/rpc.rstatd\fR
 .fi
 
 .SH DESCRIPTION
diff --git a/usr/src/man/man1m/rpc.rusersd.1m b/usr/src/man/man1m/rpc.rusersd.1m
index e49047c9f8..a0aca58b32 100644
--- a/usr/src/man/man1m/rpc.rusersd.1m
+++ b/usr/src/man/man1m/rpc.rusersd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rpc.rusersd 1M "4 Nov 2004" "SunOS 5.11" "System Administration Commands"
+.TH RPC.RUSERSD 1M "Nov 4, 2004"
 .SH NAME
 rpc.rusersd, rusersd \- network username server
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/netsvc/rusers/rpc.rusersd\fR 
+\fB/usr/lib/netsvc/rusers/rpc.rusersd\fR
 .fi
 
 .SH DESCRIPTION
diff --git a/usr/src/man/man1m/rpc.rwalld.1m b/usr/src/man/man1m/rpc.rwalld.1m
index 15df5e5802..7724cb8ced 100644
--- a/usr/src/man/man1m/rpc.rwalld.1m
+++ b/usr/src/man/man1m/rpc.rwalld.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rpc.rwalld 1M "4 Nov 2004" "SunOS 5.11" "System Administration Commands"
+.TH RPC.RWALLD 1M "Nov 4, 2004"
 .SH NAME
 rpc.rwalld, rwalld \- network rwall server
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/netsvc/rwall/rpc.rwalld\fR 
+\fB/usr/lib/netsvc/rwall/rpc.rwalld\fR
 .fi
 
 .SH DESCRIPTION
diff --git a/usr/src/man/man1m/rpc.smserverd.1m b/usr/src/man/man1m/rpc.smserverd.1m
index bdd201d876..0aa17afb1b 100644
--- a/usr/src/man/man1m/rpc.smserverd.1m
+++ b/usr/src/man/man1m/rpc.smserverd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rpc.smserverd 1M "1 Mar 2007" "SunOS 5.11" "System Administration Commands"
+.TH RPC.SMSERVERD 1M "Mar 1, 2007"
 .SH NAME
 rpc.smserverd \- removable media device server
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/smedia/rpc.smserverd\fR 
+\fB/usr/lib/smedia/rpc.smserverd\fR
 .fi
 
 .SH DESCRIPTION
diff --git a/usr/src/man/man1m/rpc.sprayd.1m b/usr/src/man/man1m/rpc.sprayd.1m
index b4addedf78..2cff5c7c23 100644
--- a/usr/src/man/man1m/rpc.sprayd.1m
+++ b/usr/src/man/man1m/rpc.sprayd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rpc.sprayd 1M "4 Nov 2004" "SunOS 5.11" "System Administration Commands"
+.TH RPC.SPRAYD 1M "Nov 4, 2004"
 .SH NAME
 rpc.sprayd, sprayd \- spray server
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/netsvc/spray/rpc.sprayd\fR 
+\fB/usr/lib/netsvc/spray/rpc.sprayd\fR
 .fi
 
 .SH DESCRIPTION
diff --git a/usr/src/man/man1m/rpc.yppasswdd.1m b/usr/src/man/man1m/rpc.yppasswdd.1m
index ef07b71fee..97cba40c50 100644
--- a/usr/src/man/man1m/rpc.yppasswdd.1m
+++ b/usr/src/man/man1m/rpc.yppasswdd.1m
@@ -3,22 +3,22 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rpc.yppasswdd 1M "24 Aug 2004" "SunOS 5.11" "System Administration Commands"
+.TH RPC.YPPASSWDD 1M "Aug 24, 2004"
 .SH NAME
 rpc.yppasswdd, yppasswdd \- server for modifying NIS password file
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/netsvc/yp/rpc.yppasswdd\fR [\fB-D\fR \fIdirectory\fR] 
-     [\fB-nogecos\fR] [\fB-noshell\fR] [\fB-nopw\fR] 
+\fB/usr/lib/netsvc/yp/rpc.yppasswdd\fR [\fB-D\fR \fIdirectory\fR]
+     [\fB-nogecos\fR] [\fB-noshell\fR] [\fB-nopw\fR]
      [\fB-m\fR \fIargument1\fR \fIargument2\fR...]
 .fi
 
 .LP
 .nf
-\fB/usr/lib/netsvc/yp/rpc.yppasswdd\fR 
-     [\fIpasswordfile\fR [\fIadjunctfile\fR]] 
-     [\fB-nogecos\fR] [\fB-noshell\fR] [\fB-nopw\fR] 
+\fB/usr/lib/netsvc/yp/rpc.yppasswdd\fR
+     [\fIpasswordfile\fR [\fIadjunctfile\fR]]
+     [\fB-nogecos\fR] [\fB-noshell\fR] [\fB-nopw\fR]
      [\fB-m\fR \fIargument1\fR \fIargument2\fR...]
 .fi
 
diff --git a/usr/src/man/man1m/rpc.ypupdated.1m b/usr/src/man/man1m/rpc.ypupdated.1m
index 0d218e95ae..6f3232cf0f 100644
--- a/usr/src/man/man1m/rpc.ypupdated.1m
+++ b/usr/src/man/man1m/rpc.ypupdated.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rpc.ypupdated 1M "20 Mar 2003" "SunOS 5.11" "System Administration Commands"
+.TH RPC.YPUPDATED 1M "Mar 20, 2003"
 .SH NAME
 rpc.ypupdated, ypupdated \- server for changing NIS information
 .SH SYNOPSIS
@@ -32,24 +32,20 @@ is not supported in N2L mode.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 6n
-.rt  
 Accept \fBRPC\fR calls with the insecure  \fBAUTH_UNIX\fR credentials. This
 allows programmatic updating of the \fBNIS\fR maps in all networks.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 6n
-.rt  
 Accept only calls authenticated using the secure  \fBRPC\fR mechanism
 (\fBAUTH_DES\fR authentication). This disables programmatic updating of the
 \fBNIS\fR maps unless the network supports these calls.
@@ -58,23 +54,19 @@ Accept only calls authenticated using the secure  \fBRPC\fR mechanism
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/yp/updaters\fR\fR
 .ad
 .RS 26n
-.rt  
 Configuration file for \fBrpc.updated\fR command.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/yp/NISLDAPmapping\fR\fR
 .ad
 .RS 26n
-.rt  
 Configuration file for N2L
 .RE
 
@@ -86,13 +78,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/rpcbind.1m b/usr/src/man/man1m/rpcbind.1m
index befd4eb0bf..c2d97b246d 100644
--- a/usr/src/man/man1m/rpcbind.1m
+++ b/usr/src/man/man1m/rpcbind.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rpcbind 1M "1 Aug 2006" "SunOS 5.11" "System Administration Commands"
+.TH RPCBIND 1M "Aug 1, 2006"
 .SH NAME
 rpcbind \- universal addresses to RPC program number mapper
 .SH SYNOPSIS
@@ -83,12 +83,10 @@ The FMRI \fBsvc:network/rpc/bind\fR property group \fBconfig\fR contains the
 following property settings:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBenable_tcpwrappers\fR\fR
 .ad
 .RS 22n
-.rt  
 Specifies that the TCP wrappers facility is used to control access to TCP
 services. The value \fBtrue\fR enables checking. The default value for
 \fBenable_tcpwrappers\fR is \fBfalse\fR. If the \fBenable_tcpwrappers\fR
@@ -105,12 +103,10 @@ by Sun, intrarelease incompatibilities are not uncommon. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBverbose_logging\fR\fR
 .ad
 .RS 22n
-.rt  
 Specifies whether the TCP wrappers facility logs all calls orjust the denied
 calls. The default is \fBfalse\fR. This option has no effect if TCP wrappers
 are not enabled.
@@ -118,12 +114,10 @@ are not enabled.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBallow_indirect\fR\fR
 .ad
 .RS 22n
-.rt  
 Specifies whether \fBrpcbind\fR allows indirect calls at all. By default,
 \fBrpcbind\fR allows most indirect calls, except to a number of standard
 services(\fBkeyserv\fR, \fBautomount\fR, \fBmount\fR, \fBnfs\fR, \fBrquota\fR,
@@ -138,12 +132,10 @@ NIS broadcast clients rely on this functionality on NIS servers.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 6n
-.rt  
 Run in debug mode. In this mode, \fBrpcbind\fR does not fork when it starts. It
 prints additional information during operation, and aborts on certain errors.
 With this option, the name-to-address translation consistency checks are shown
@@ -152,12 +144,10 @@ in detail.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR\fR
 .ad
 .RS 6n
-.rt  
 Do a warm start. If \fBrpcbind\fR aborts or terminates on \fBSIGINT\fR or
 \fB\fR\fBSIGTERM\fR, it writes the current list of registered services to
 \fB/var/run/portmap.file\fR and \fB/var/run/rpcbind.file\fR. Starting
@@ -185,24 +175,20 @@ The following sequence of commands allows remote access to \fBrpcbind\fR.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/run/portmap.file\fR\fR
 .ad
 .RS 25n
-.rt  
 Stores the information for \fBRPC\fR services registered over IP based
 transports for warm start purposes.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/run/rpcbind.file\fR\fR
 .ad
 .RS 25n
-.rt  
 Stores the information for all registered \fBRPC\fR services for warm start
 purposes.
 .RE
@@ -215,13 +201,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/rpcinfo.1m b/usr/src/man/man1m/rpcinfo.1m
index 4f62c70058..24df1c4527 100644
--- a/usr/src/man/man1m/rpcinfo.1m
+++ b/usr/src/man/man1m/rpcinfo.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rpcinfo 1M "13 Jul 2001" "SunOS 5.11" "System Administration Commands"
+.TH RPCINFO 1M "Jul 13, 2001"
 .SH NAME
 rpcinfo \- report RPC information
 .SH SYNOPSIS
@@ -97,12 +97,10 @@ The \fBEXAMPLES\fR section describe other ways of using \fBrpcinfo\fR.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR\fI transport\fR\fR
 .ad
 .RS 19n
-.rt  
 Specify the transport on which the service is required. If this option is not
 specified, \fBrpcinfo\fR uses the transport specified in the \fBNETPATH\fR
 environment variable, or if that is unset or \fINULL,\fR the transport in the
@@ -112,12 +110,10 @@ in conjunction with other options as shown in the \fBSYNOPSIS\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIserv_address\fR\fR
 .ad
 .RS 19n
-.rt  
 Use \fIserv_address\fR as the (universal) address for the service on
 \fItransport\fR to \fBping\fR procedure 0 of the specified \fIprognum\fR and
 report whether a response was received. The \fB-T\fR option is required with
@@ -130,12 +126,10 @@ transport.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR\fR
 .ad
 .RS 19n
-.rt  
 Make an \fBRPC\fR broadcast to procedure 0 of the specified \fIprognum\fR and
 \fIversnum\fR and report all hosts that respond. If \fItransport\fR is
 specified, it broadcasts its request only on the specified transport. If
@@ -146,12 +140,10 @@ effect on other systems.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 19n
-.rt  
 Delete registration for the \fBRPC\fR service of the specified \fIprognum\fR
 and \fIversnum\fR. If \fItransport\fR is specified, unregister the service on
 only that transport, otherwise unregister the service on all the transports on
@@ -161,12 +153,10 @@ except the superuser, who can delete any service.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 19n
-.rt  
 Display a list of entries with a given \fIprognum\fR and \fIversnum\fR on the
 specified \fIhost\fR. Entries are returned for all transports in the same
 protocol family as that used to contact the remote \fBrpcbind\fR.
@@ -174,12 +164,10 @@ protocol family as that used to contact the remote \fBrpcbind\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
 .RS 19n
-.rt  
 Display a table of statistics of \fBrpcbind\fR operations on the given
 \fIhost\fR. The table shows statistics for each version of \fBrpcbind\fR
 (versions 2, 3 and 4), giving the number of times each procedure was requested
@@ -190,12 +178,10 @@ This is useful for monitoring \fBRPC\fR activities on \fIhost\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fI portnum\fR\fR
 .ad
 .RS 19n
-.rt  
 Use \fIportnum\fR as the port number for the \fB-t\fR and \fB-u\fR options
 instead of the port number given by \fBrpcbind\fR. Use of this option avoids a
 call to the remote \fBrpcbind\fR to find out the address of the service. This
@@ -204,12 +190,10 @@ option is made obsolete by the \fB-a\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 19n
-.rt  
 Probe \fBrpcbind\fR on \fIhost\fR using version 2 of the \fBrpcbind\fR
 protocol, and display a list of all registered \fBRPC\fR programs. If
 \fIhost\fR is not specified, it defaults to the local host. This option is not
@@ -219,24 +203,20 @@ useful for IPv6; use \fB-s\fR (see below) instead. Note that version 2 of the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 19n
-.rt  
 Display a concise list of all registered \fBRPC\fR programs on \fIhost\fR. If
 \fIhost\fR is not specified, it defaults to the local host.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
 .RS 19n
-.rt  
 Make an \fBRPC\fR call to procedure 0 of \fIprognum\fR on the specified
 \fIhost\fR using \fBTCP,\fR and report whether a response was received. This
 option is made obsolete by the \fB-T\fR option as shown in the third synopsis.
@@ -244,12 +224,10 @@ option is made obsolete by the \fB-T\fR option as shown in the third synopsis.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
 .RS 19n
-.rt  
 Make an \fBRPC\fR call to procedure 0 of \fIprognum\fR on the specified
 \fIhost\fR using \fBUDP,\fR and report whether a response was received. This
 option is made obsolete by the \fB-T\fR option as shown in the third synopsis.
@@ -300,22 +278,20 @@ The information displayed by the above commands can be quite lengthy. Use the
 
 .sp
 .TS
-tab();
-lw(.7i) lw(.47i) lw(2.82i) lw(.7i) lw(.81i) 
-lw(.7i) lw(.47i) lw(2.82i) lw(.7i) lw(.81i) 
-.
-\fBprogram\fR\fBvrsn\fR\fBnetid(s)\fR\fBservice\fR\fBowner\fR
-\fB100000\fR\fB2,3,4\fR\fBtcp,udp,ticlts,ticots,ticotsord\fR\fBrpcbind\fR\fBsuperuser\fR
-\fB100008\fR\fB1\fR\fBticotsord,ticots,ticlts,udp,tcp\fR\fBwalld\fR\fBsuperuser\fR
-\fB100002\fR\fB2,1\fR\fBticotsord,ticots,ticlts,udp,tcp\fR\fBrusersd\fR\fBsuperuser\fR
-\fB100001\fR\fB2,3,4\fR\fBticotsord,ticots,tcp,ticlts,udp\fR\fBrstatd\fR\fBsuperuser\fR
-\fB100012\fR\fB1\fR\fBticotsord,ticots,ticlts,udp,tcp\fR\fBsprayd\fR\fBsuperuser\fR
-\fB100007\fR\fB3\fR\fBticotsord,ticots,ticlts,udp,tcp\fR\fBypbind\fR\fBsuperuser\fR
-\fB100029\fR\fB1\fR\fBticotsord,ticots,ticlts\fR\fBkeyserv\fR\fBsuperuser\fR
-\fB100078\fR\fB4\fR\fBticotsord,ticots,ticlts\fR\fB-\fRsuperuser
-\fB100024\fR\fB1\fR\fBticotsord,ticots,ticlts,udp,tcp\fR\fBstatus\fR\fBsuperuser\fR
-\fB100021\fR\fB2,1\fR\fBticotsord,ticots,ticlts,udp,tcp\fR\fBnlockmgr\fR\fBsuperuser\fR
-\fB100020\fR\fB1\fR\fBticotsord,ticots,ticlts,udp,tcp\fR\fBllockmgr\fR\fBsuperuser\fR
+l l l l l
+l l l l l .
+\fBprogram\fR	\fBvrsn\fR	\fBnetid(s)\fR	\fBservice\fR	\fBowner\fR
+\fB100000\fR	\fB2,3,4\fR	\fBtcp,udp,ticlts,ticots,ticotsord\fR	\fBrpcbind\fR	\fBsuperuser\fR
+\fB100008\fR	\fB1\fR	\fBticotsord,ticots,ticlts,udp,tcp\fR	\fBwalld\fR	\fBsuperuser\fR
+\fB100002\fR	\fB2,1\fR	\fBticotsord,ticots,ticlts,udp,tcp\fR	\fBrusersd\fR	\fBsuperuser\fR
+\fB100001\fR	\fB2,3,4\fR	\fBticotsord,ticots,tcp,ticlts,udp\fR	\fBrstatd\fR	\fBsuperuser\fR
+\fB100012\fR	\fB1\fR	\fBticotsord,ticots,ticlts,udp,tcp\fR	\fBsprayd\fR	\fBsuperuser\fR
+\fB100007\fR	\fB3\fR	\fBticotsord,ticots,ticlts,udp,tcp\fR	\fBypbind\fR	\fBsuperuser\fR
+\fB100029\fR	\fB1\fR	\fBticotsord,ticots,ticlts\fR	\fBkeyserv\fR	\fBsuperuser\fR
+\fB100078\fR	\fB4\fR	\fBticotsord,ticots,ticlts\fR	\fB-\fR	superuser
+\fB100024\fR	\fB1\fR	\fBticotsord,ticots,ticlts,udp,tcp\fR	\fBstatus\fR	\fBsuperuser\fR
+\fB100021\fR	\fB2,1\fR	\fBticotsord,ticots,ticlts,udp,tcp\fR	\fBnlockmgr\fR	\fBsuperuser\fR
+\fB100020\fR	\fB1\fR	\fBticotsord,ticots,ticlts,udp,tcp\fR	\fBllockmgr\fR	\fBsuperuser\fR
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/rquotad.1m b/usr/src/man/man1m/rquotad.1m
index 71a42f3258..feca16055f 100644
--- a/usr/src/man/man1m/rquotad.1m
+++ b/usr/src/man/man1m/rquotad.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rquotad 1M "30 Apr 2009" "SunOS 5.11" "System Administration Commands"
+.TH RQUOTAD 1M "Apr 30, 2009"
 .SH NAME
 rquotad \- remote quota server
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/nfs/rquotad\fR 
+\fB/usr/lib/nfs/rquotad\fR
 .fi
 
 .SH DESCRIPTION
@@ -27,12 +27,10 @@ when encountering files greater than or equal to 2 Gbyte (2^31 bytes).
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fBquotas\fR\fR
 .ad
 .RS 10n
-.rt  
 quota file at a UFS file system root
 .RE
 
diff --git a/usr/src/man/man1m/rsh.1m b/usr/src/man/man1m/rsh.1m
index d70ff6d032..025f371aec 100644
--- a/usr/src/man/man1m/rsh.1m
+++ b/usr/src/man/man1m/rsh.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rsh 1M "1 Nov 1993" "SunOS 5.11" "System Administration Commands"
+.TH RSH 1M "Nov 1, 1993"
 .SH NAME
 rsh, restricted_shell \- restricted shell command interpreter
 .SH SYNOPSIS
diff --git a/usr/src/man/man1m/rtc.1m b/usr/src/man/man1m/rtc.1m
index 2301483ff4..fd258fde45 100644
--- a/usr/src/man/man1m/rtc.1m
+++ b/usr/src/man/man1m/rtc.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rtc 1M "3 Oct 2003" "SunOS 5.11" "System Administration Commands"
+.TH RTC 1M "Oct 3, 2003"
 .SH NAME
 rtc \- provide all real-time clock and GMT-lag management
 .SH SYNOPSIS
@@ -32,12 +32,10 @@ to ensure that daylight savings time (\fBDST\fR) is corrected for properly.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 16n
-.rt  
 This option checks for \fBDST\fR and makes corrections if necessary. It is
 normally run once a day by a \fBcron\fR job.
 .sp
@@ -47,12 +45,10 @@ will do nothing.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-z\fR\fB \fR\fIzone-name\fR\fR
 .ad
 .RS 16n
-.rt  
 This option, which is normally run by the system at software installation time,
 is used to specify the time zone in which the \fBRTC\fR is to be maintained. It
 updates the configuration file \fB/etc/rtc_config\fR with the name of the
@@ -64,12 +60,10 @@ command will create it.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/rtc_config\fR\fR
 .ad
 .RS 19n
-.rt  
 The data file used to record the time zone and \fBGMT\fR lag. This file is
 completely managed by \fB/usr/sbin/rtc\fR, and it is read by the kernel.
 .RE
@@ -82,13 +76,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Architecturex86
+Architecture	x86
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/rtquery.1m b/usr/src/man/man1m/rtquery.1m
index cea5e5c377..c388551109 100644
--- a/usr/src/man/man1m/rtquery.1m
+++ b/usr/src/man/man1m/rtquery.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rtquery 1M "24 Apr 2002" "SunOS 5.11" "System Administration Commands"
+.TH RTQUERY 1M "Apr 24, 2002"
 .SH NAME
 rtquery \- query routing daemons for their routing tables
 .SH SYNOPSIS
@@ -45,7 +45,6 @@ The \fBrtquery\fR command is also used to turn tracing on or off in
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fBpasswd=\fR\fIXXX\fR\fR
 .ad
@@ -54,65 +53,54 @@ The following options are supported:
 \fB\fB-a\fR \fBmd5_passwd=\fR\fIXXX\fR|\fIKeyID\fR\fR
 .ad
 .RS 27n
-.rt  
 Causes the query to be sent with the indicated cleartext or MD5 password.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 27n
-.rt  
 Displays only the numeric network and host addresses instead of both numeric
 and symbolic names.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 27n
-.rt  
 Uses the poll command to request full routing information from \fBGateD\fR.
 This is an undocumented extension RIP protocol supported only by \fBGateD\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIaddr\fR\fR
 .ad
 .RS 27n
-.rt  
 Asks about the route to destination \fIaddr\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fIoperation\fR\fR
 .ad
 .RS 27n
-.rt  
 Changes tracing, where \fIoperation\fR is one of the actions listed below.
 Requests from processes not running with UID 0 or on distant networks are
 generally ignored by the daemon except for a message in the system log.
 \fBGateD\fR is likely to ignore these debugging requests.
 .sp
 .ne 2
-.mk
 .na
 \fBon=\fItracefile\fR\fR
 .ad
 .RS 16n
-.rt  
 Turns tracing on, directing tracing into the specified file. That file must
 have been specified when the daemon was started or have the name,
 \fB/var/log/in.routed.trace\fR.
@@ -120,34 +108,28 @@ have been specified when the daemon was started or have the name,
 
 .sp
 .ne 2
-.mk
 .na
 \fBmore\fR
 .ad
 .RS 16n
-.rt  
 Increases the debugging level.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBoff\fR
 .ad
 .RS 16n
-.rt  
 Turns off tracing.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBdump\fR
 .ad
 .RS 16n
-.rt  
 Dumps the daemon's routing table to the current trace file.
 .RE
 
@@ -155,24 +137,20 @@ Dumps the daemon's routing table to the current trace file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR \fItimeout\fR\fR
 .ad
 .RS 27n
-.rt  
 Changes the delay for an answer from each host. By default, each host is given
 15 seconds to respond.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-1\fR\fR
 .ad
 .RS 27n
-.rt  
 Queries using RIP version 1 instead of RIP version 2.
 .RE
 
@@ -182,23 +160,19 @@ Queries using RIP version 1 instead of RIP version 2.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
diff --git a/usr/src/man/man1m/runacct.1m b/usr/src/man/man1m/runacct.1m
index 97d09af060..0c6bbc212a 100644
--- a/usr/src/man/man1m/runacct.1m
+++ b/usr/src/man/man1m/runacct.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH runacct 1M "11 May 1999" "SunOS 5.11" "System Administration Commands"
+.TH RUNACCT 1M "May 11, 1999"
 .SH NAME
 runacct \- run daily accounting
 .SH SYNOPSIS
@@ -39,125 +39,103 @@ determine what to process next. \fIstates\fR are executed in the following
 order:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSETUP\fR\fR
 .ad
 .RS 14n
-.rt  
 Move active accounting files into working files.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBWTMPFIX\fR\fR
 .ad
 .RS 14n
-.rt  
 Verify integrity of \fBwtmpx\fR file, correcting date changes if necessary.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCONNECT\fR\fR
 .ad
 .RS 14n
-.rt  
 Produce connect session records in \fBtacct.h\fR format.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPROCESS\fR\fR
 .ad
 .RS 14n
-.rt  
 Convert process accounting records into \fBtacct.h\fR format.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMERGE\fR\fR
 .ad
 .RS 14n
-.rt  
 Merge the connect and process accounting records.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFEES\fR\fR
 .ad
 .RS 14n
-.rt  
 Convert output of \fBchargefee\fR into \fBtacct.h\fR format, merge with
 connect, and process accounting records.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDISK\fR\fR
 .ad
 .RS 14n
-.rt  
 Merge disk accounting records with connect, process, and fee accounting
 records.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMERGETACCT\fR\fR
 .ad
 .RS 14n
-.rt  
 Merge the daily total accounting records in \fBdaytacct\fR with the summary
 total accounting records in \fB/var/adm/acct/sum/tacct\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCMS\fR\fR
 .ad
 .RS 14n
-.rt  
 Produce command summaries.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBUSEREXIT\fR\fR
 .ad
 .RS 14n
-.rt  
 Any installation dependent accounting programs can be included here.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCLEANUP\fR\fR
 .ad
 .RS 14n
-.rt  
 Clean up temporary files and exit. To restart \fBrunacct\fR after a failure,
 first check the \fBactive\fR file for diagnostics, then fix any corrupted data
 files, such as \fBpacct\fR or \fBwtmpx\fR. The \fBlock\fR, \fBlock1\fR, and
@@ -215,7 +193,6 @@ example% nohup runacct 0601 MERGE 2>> /var/adm/acct/nite/fd2log &
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/wtmpx\fR\fR
 .ad
@@ -226,79 +203,72 @@ History of user access and administration information
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/pacct\fR\fIincr\fR\fR
 .ad
 .sp .6
 .RS 4n
- 
+
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/acct/nite/active\fR\fR
 .ad
 .sp .6
 .RS 4n
- 
+
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/acct/nite/daytacct\fR\fR
 .ad
 .sp .6
 .RS 4n
- 
+
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/acct/nite/lock\fR\fR
 .ad
 .sp .6
 .RS 4n
- 
+
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/acct/nite/lock1\fR\fR
 .ad
 .sp .6
 .RS 4n
- 
+
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/acct/nite/lastdate\fR\fR
 .ad
 .sp .6
 .RS 4n
- 
+
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/acct/nite/statefile\fR\fR
 .ad
 .sp .6
 .RS 4n
- 
+
 .RE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/rwall.1m b/usr/src/man/man1m/rwall.1m
index f957957d45..d66b962b75 100644
--- a/usr/src/man/man1m/rwall.1m
+++ b/usr/src/man/man1m/rwall.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH rwall 1M "6 Nov 2000" "SunOS 5.11" "System Administration Commands"
+.TH RWALL 1M "Nov 6, 2000"
 .SH NAME
 rwall \- write to all users over a network
 .SH SYNOPSIS
@@ -29,7 +29,6 @@ rwall \- write to all users over a network
 message, preceded by the line:
 .sp
 .ne 2
-.mk
 .na
 \fB\fR
 .ad
@@ -45,23 +44,19 @@ option, it sends to the specified network groups.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fI netgroup\fR\fR
 .ad
 .RS 15n
-.rt  
 Send the broadcast message to the specified network groups.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fI hostname\fR\fR
 .ad
 .RS 15n
-.rt  
 Specify the \fBhostname\fR, the name of the host machine.
 .RE
 
diff --git a/usr/src/man/man1m/sac.1m b/usr/src/man/man1m/sac.1m
index 722ea4848c..1e0a31879c 100644
--- a/usr/src/man/man1m/sac.1m
+++ b/usr/src/man/man1m/sac.1m
@@ -1,10 +1,10 @@
 '\" te
-.\" Copyright 1989 AT&T 
+.\" Copyright 1989 AT&T
 .\" Copyright (C) 2002, Sun Microsystems, Inc. All Rights Reserved
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH sac 1M "21 Apr 2009" "SunOS 5.11" "System Administration Commands"
+.TH SAC 1M "Apr 21, 2009"
 .SH NAME
 sac \- service access controller
 .SH SYNOPSIS
@@ -15,7 +15,7 @@ sac \- service access controller
 
 .LP
 .nf
-\fB/usr/lib/saf/sac\fR 
+\fB/usr/lib/saf/sac\fR
 .fi
 
 .SH DESCRIPTION
@@ -66,59 +66,49 @@ Access Controller returns the status  of the port monitors specified, which
 states:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBENABLED\fR\fR
 .ad
 .RS 14n
-.rt  
 The port monitor is currently running and is accepting connections. See
 \fBsacadm\fR(1M) with the \fB-e\fR option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDISABLED\fR\fR
 .ad
 .RS 14n
-.rt  
 The port monitor is currently running and is not accepting connections. See
 \fBsacadm\fR with the \fB-d\fR option, and see \fBNOTRUNNING\fR, below.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSTARTING\fR\fR
 .ad
 .RS 14n
-.rt  
 The port monitor is in the process of starting up. \fBSTARTING\fR is an
 intermediate state  on the way to \fBENABLED\fR or \fBDISABLED\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFAILED\fR\fR
 .ad
 .RS 14n
-.rt  
 The port monitor was unable to start and remain running.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSTOPPING\fR\fR
 .ad
 .RS 14n
-.rt  
 The port monitor has been manually terminated but has not completed its
 shutdown procedure. \fBSTOPPING\fR is an intermediate state on the way to
 \fBNOTRUNNING\fR.
@@ -126,12 +116,10 @@ shutdown procedure. \fBSTOPPING\fR is an intermediate state on the way to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNOTRUNNING\fR\fR
 .ad
 .RS 14n
-.rt  
 The port monitor is not currently running. (See \fBsacadm\fR with \fB-k\fR.)
 This is the normal "not running" state. When a port monitor is killed, all
 ports it was monitoring are inaccessible.  It is not possible for an external
@@ -191,12 +179,10 @@ If there are no entries for the \fBsac\fR service, then the entries for the
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fIsanity_interval\fR\fR
 .ad
 .RS 22n
-.rt  
 Sets the frequency (\fIsanity_interval\fR) with which \fBsac\fR polls the port
 monitors on the system.
 .RE
diff --git a/usr/src/man/man1m/sacadm.1m b/usr/src/man/man1m/sacadm.1m
index 362b153889..adcb22fef0 100644
--- a/usr/src/man/man1m/sacadm.1m
+++ b/usr/src/man/man1m/sacadm.1m
@@ -4,13 +4,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH sacadm 1M "14 Sep 1992" "SunOS 5.11" "System Administration Commands"
+.TH SACADM 1M "Sep 14, 1992"
 .SH NAME
 sacadm \- service access controller administration
 .SH SYNOPSIS
 .LP
 .nf
-\fBsacadm\fR \fB-a\fR \fB-p\fR \fIpmtag\fR \fB-t\fR \fItype\fR \fB-c\fR \fIcmd\fR \fB-v\fR \fIver\fR [\fB-f\fR dx] [\fB-n\fR \fIcount\fR] 
+\fBsacadm\fR \fB-a\fR \fB-p\fR \fIpmtag\fR \fB-t\fR \fItype\fR \fB-c\fR \fIcmd\fR \fB-v\fR \fIver\fR [\fB-f\fR dx] [\fB-n\fR \fIcount\fR]
      [\fB-y\fR \fIcomment\fR] [\fB-z\fR \fIscript\fR]
 .fi
 
@@ -115,12 +115,10 @@ system. Other \fBsacadm\fR commands may be executed only by the super-user.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 14n
-.rt  
 Add a port monitor. When adding a port monitor, \fBsacadm\fR creates the
 supporting directory structure in \fB/etc/saf\fR and \fB/var/saf\fR and adds an
 entry for the new port monitor to \fB/etc/saf/_sactab\fR. The file
@@ -135,46 +133,38 @@ the menu system to add port monitors.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcmd\fR\fR
 .ad
 .RS 14n
-.rt  
 Execute the command string \fIcmd\fR to start a port monitor. The \fB-c\fR
 option may be used only with a \fB-a\fR. A \fB-a\fR option requires a \fB-c\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 14n
-.rt  
 Disable the port monitor \fIpmtag\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
 .RS 14n
-.rt  
 Enable the port monitor \fIpmtag\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fBdx\fR\fR
 .ad
 .RS 14n
-.rt  
 The \fB-f\fR option  specifies one or both of the following two flags which are
 then included in the flags field of the \fB_sactab\fR entry for the new port
 monitor. If the \fB-f\fR option is not included on the command line, no flags
@@ -182,23 +172,19 @@ are set and the default conditions prevail. By default, a port monitor is
 started. A \fB-f\fR option with no following argument is illegal.
 .sp
 .ne 2
-.mk
 .na
 \fBd\fR
 .ad
 .RS 5n
-.rt  
 Do not enable the new port monitor.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBx\fR
 .ad
 .RS 5n
-.rt  
 Do not start the new port monitor.
 .RE
 
@@ -206,12 +192,10 @@ Do not start the new port monitor.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR\fR
 .ad
 .RS 14n
-.rt  
 The \fB-g\fR option is used to request output or to install or replace the
 per-port monitor configuration script \fB/etc/saf/\fR\fIpmtag\fR\fB/_config\fR.
 \fB-g\fR requires a \fB-p\fR option. The \fB-g\fR option with only a \fB-p\fR
@@ -224,12 +208,10 @@ invalid.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-G\fR\fR
 .ad
 .RS 14n
-.rt  
 The \fB-G\fR option is used to request output or to install or replace the
 per-system configuration script \fB/etc/saf/_sysconfig\fR. The \fB-G\fR option
 by itself prints the per-system configuration script. The \fB-G\fR option in
@@ -240,23 +222,19 @@ option are invalid.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR\fR
 .ad
 .RS 14n
-.rt  
 Stop port monitor \fIpmtag\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 14n
-.rt  
 The \fB-l\fR option is used to request port monitor information. The \fB-l\fR
 by itself lists all port monitors on the system. The \fB-l\fR option in
 combination with the \fB-p\fR option lists only the port monitor specified by
@@ -267,24 +245,20 @@ option is invalid.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR\fR
 .ad
 .RS 14n
-.rt  
 The \fB-L\fR option is identical to the \fB-l\fR option except that the output
 appears in a condensed format.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fIcount\fR\fR
 .ad
 .RS 14n
-.rt  
 Set the restart count to \fIcount\fR. If a restart count is not specified,
 count is set to \fB0\fR. A count of \fB0\fR indicates that the port monitor is
 not to be restarted if it fails.
@@ -292,23 +266,19 @@ not to be restarted if it fails.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIpmtag\fR\fR
 .ad
 .RS 14n
-.rt  
 Specifies the tag associated with a port monitor.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 14n
-.rt  
 Remove port monitor \fIpmtag\fR. \fBsacadm\fR removes the port monitor entry
 from \fB/etc/saf/_sactab\fR. If the removed port monitor is not running, then
 no further action is taken. If the removed port monitor is running, the Service
@@ -318,34 +288,28 @@ down. Note that the port monitor's directory structure remains intact.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 14n
-.rt  
 Start a port monitor. The SAC starts the port monitor \fIpmtag\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fBtype\fR\fR
 .ad
 .RS 14n
-.rt  
 Specifies the port monitor type.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR \fBver\fR\fR
 .ad
 .RS 14n
-.rt  
 Specifies the version number of the port monitor. This version number may be
 given as
 .sp
@@ -365,12 +329,10 @@ option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
 .RS 14n
-.rt  
 The \fB-x\fR option by itself  tells the SAC to read its database file
 (\fB_sactab\fR). The \fB-x\fR option with the \fB-p\fR option tells port
 monitor \fIpmtag\fR to read its administrative file.
@@ -378,23 +340,19 @@ monitor \fIpmtag\fR to read its administrative file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-y\fR \fIcomment\fR\fR
 .ad
 .RS 14n
-.rt  
 Include \fIcomment\fR in the \fB_sactab\fR entry for port monitor \fIpmtag\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-z\fR \fBscript\fR\fR
 .ad
 .RS 14n
-.rt  
 Used with the \fB-g\fR and \fB-G\fR options to specify the name of a file that
 contains a configuration script. With the \fB-g\fR option, \fBscript\fR is a
 per-port monitor configuration script; with \fB-G\fR it is a per-system
@@ -560,34 +518,28 @@ monitor whose tag is \fBpmtag\fR with the contents of the file
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/saf/_sactab\fR\fR
 .ad
 .RS 26n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/saf/_sysconfig\fR\fR
 .ad
 .RS 26n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/saf/\fIpmtag\fR\fR\fB/_config\fR\fR
 .ad
 .RS 26n
-.rt  
 
 .RE
 
diff --git a/usr/src/man/man1m/saf.1m b/usr/src/man/man1m/saf.1m
index 7ada8977ab..a113e43576 100644
--- a/usr/src/man/man1m/saf.1m
+++ b/usr/src/man/man1m/saf.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH saf 1M "30 Jul1998" "SunOS 5.11" "System Administration Commands"
+.TH SAF 1M "Jul 30, 1998"
 .SH NAME
 saf \- Service Access Facility
 .SH DESCRIPTION
@@ -51,12 +51,10 @@ design of the port monitor itself. Port monitors have two main functions:
 managing ports and monitoring ports for indications of activity.
 .sp
 .ne 2
-.mk
 .na
 \fBPort Management\fR
 .ad
 .RS 23n
-.rt  
 The first function of a port monitor is to manage a port. The actual details of
 how a port is managed are defined by the person who defines the port monitor. A
 port monitor is not restricted to handling a single port; it may handle
@@ -69,12 +67,10 @@ when the service terminates, outputting a prompt, etc.
 
 .sp
 .ne 2
-.mk
 .na
 \fBActivity Monitoring\fR
 .ad
 .RS 23n
-.rt  
 The second function of a port monitor is to monitor the port or ports for which
 it is responsible for indications of activity. Two types of activity may be
 detected.
@@ -98,7 +94,6 @@ more than one port.
 This section briefly describes other port monitor functions.
 .sp
 .ne 2
-.mk
 .na
 \fBRestricting Access to the System\fR
 .ad
@@ -122,7 +117,6 @@ invocations of the port monitor.
 
 .sp
 .ne 2
-.mk
 .na
 \fBCreating \fButmpx\fR Entries\fR
 .ad
@@ -138,7 +132,6 @@ DEAD_PROCESS.
 
 .sp
 .ne 2
-.mk
 .na
 \fBPort Monitor Process IDs and Lock Files\fR
 .ad
@@ -150,7 +143,6 @@ When a port monitor starts, it writes its process id into a file named
 
 .sp
 .ne 2
-.mk
 .na
 \fBChanging the Service Environment: Running\fR
 .ad
@@ -168,7 +160,6 @@ monitor.
 
 .sp
 .ne 2
-.mk
 .na
 \fBTerminating a Port Monitor\fR
 .ad
@@ -209,7 +200,6 @@ invocation of the port monitor may be started.
 This section briefly covers the files used by the \fBSAF.\fR
 .sp
 .ne 2
-.mk
 .na
 \fBThe Port Monitor Administrative File\fR
 .ad
@@ -228,7 +218,6 @@ functions.
 
 .sp
 .ne 2
-.mk
 .na
 \fBPer-Service Configuration Files\fR
 .ad
@@ -241,7 +230,6 @@ correspond to the service tags in the \fB_pmtab\fR file.
 
 .sp
 .ne 2
-.mk
 .na
 \fBPrivate Port Monitor Files\fR
 .ad
@@ -280,12 +268,10 @@ port monitor (\fBsac\fR messages), and from a port monitor to the \fBSAC\fR
 form of C structures.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsac\fR Messages\fR
 .ad
 .RS 16n
-.rt  
 The format of messages from the \fBSAC\fR is defined by the structure
 \fBsacmsg\fR:
 .sp
@@ -309,45 +295,37 @@ message is indicated by setting the \fBsc_type\fR field of the \fBsacmsg\fR
 structure to one of the following:
 .sp
 .ne 2
-.mk
 .na
 \fBSC_STATUS\|\fR
 .ad
 .RS 15n
-.rt  
 status request
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBSC_ENABLE\|\fR
 .ad
 .RS 15n
-.rt  
 enable message
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBSC_DISABLE\fR
 .ad
 .RS 15n
-.rt  
 disable message
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBSC_READDB\|\fR
 .ad
 .RS 15n
-.rt  
 message indicating that the port monitor's _pmtab file should be read
 .RE
 
@@ -382,23 +360,19 @@ message is indicated by setting the \fBpm_type\fR field of the \fBpmmsg\fR
 structure to one of the following:
 .sp
 .ne 2
-.mk
 .na
 \fBPM_STATUS\fR
 .ad
 .RS 14n
-.rt  
 state information
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBPM_UNKNOWN\fR
 .ad
 .RS 14n
-.rt  
 negative acknowledgment
 .RE
 
@@ -409,45 +383,37 @@ tag and the \fBpm_state\fR field is set to the port monitor's current state.
 Valid states are:
 .sp
 .ne 2
-.mk
 .na
 \fBPM_STARTING\fR
 .ad
 .RS 15n
-.rt  
 starting
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBPM_ENABLED\fR
 .ad
 .RS 15n
-.rt  
 enabled
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBPM_DISABLED\fR
 .ad
 .RS 15n
-.rt  
 disabled
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBPM_STOPPING\fR
 .ad
 .RS 15n
-.rt  
 stopping
 .RE
 
@@ -512,12 +478,10 @@ entries should be made using the administrative command \fBsacadm\fR(1M) with a
 file contains the following information.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPMTAG\fR\fR
 .ad
 .RS 11n
-.rt  
 A unique tag that identifies a particular port monitor. The system
 administrator is responsible for naming a port monitor. This tag is then used
 by the \fBSAC\fR to identify the port  monitor for all administrative purposes.
@@ -526,12 +490,10 @@ by the \fBSAC\fR to identify the port  monitor for all administrative purposes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPMTYPE\fR\fR
 .ad
 .RS 11n
-.rt  
 The type of the port monitor. In addition to its unique tag, each port monitor
 has a type designator. The type designator identifies a group of port monitors
 that are different invocations of the same entity. ttymon and listen are
@@ -544,32 +506,26 @@ up to 14 alphanumeric characters.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFLGS\fR\fR
 .ad
 .RS 11n
-.rt  
 The flags that are currently defined are:
 .sp
 .ne 2
-.mk
 .na
 \fBd\fR
 .ad
 .RS 5n
-.rt  
 When started, do not enable the port monitor.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBx\fR
 .ad
 .RS 5n
-.rt  
 Do not start the port monitor.
 .RE
 
@@ -579,12 +535,10 @@ is started and enabled.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRCNT\fR\fR
 .ad
 .RS 11n
-.rt  
 The number of times a port monitor may fail before being placed in a failed
 state. Once a port monitor enters the failed state, the \fBSAC\fR will not try
 to restart it. If a count is not specified when the entry is created, this
@@ -594,12 +548,10 @@ to be restarted when it fails.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCOMMAND\fR\fR
 .ad
 .RS 11n
-.rt  
 A string representing the command that will start the port monitor. The first
 component of the string, the command itself, must be a full path name.
 .RE
@@ -652,58 +604,48 @@ requires both a port monitor tag and a service tag to identify it uniquely.
 entries are defined as:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFLGS\fR\fR
 .ad
 .RS 14n
-.rt  
 Flags with the following meanings may currently be included in this field:
 .sp
 .ne 2
-.mk
 .na
 \fBx\fR
 .ad
 .RS 5n
-.rt  
 Do not enable this port. By default the port is enabled.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBu\fR
 .ad
 .RS 5n
-.rt  
-Create a utmpx entry for this service. By 	default no utmpx entry is created
-for the 	service.
+Create a utmpx entry for this service. By default no utmpx entry is created
+for the service.
 .RE
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBID\fR\fR
 .ad
 .RS 14n
-.rt  
 The identity under which the service is to be started. The identity has the
 form of a login name as it appears in \fB/etc/passwd\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPMSPECIFIC\fR\fR
 .ad
 .RS 14n
-.rt  
 Examples of port monitor information are addresses, the name of a process to
 execute, or the name of a STREAMS-based pipe to pass a connection through. This
 information will vary to meet the needs of each different type of port monitor.
@@ -711,12 +653,10 @@ information will vary to meet the needs of each different type of port monitor.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCOMMENT\fR\fR
 .ad
 .RS 14n
-.rt  
 A comment associated with the service entry. Port monitors may ignore the
 \fIu\fR flag if creating a utmpx entry for the service is not appropriate to
 the manner in which the service is to be invoked. Some services may not start
@@ -759,7 +699,6 @@ The interface between a port monitor and a service is determined solely by the
 service. Two mechanisms for invoking a service are presented here as examples.
 .sp
 .ne 2
-.mk
 .na
 \fBNew Service Invocations\fR
 .ad
@@ -776,7 +715,6 @@ is done by calling the library routine \fBdoconfig\fR(3NSL).
 
 .sp
 .ne 2
-.mk
 .na
 \fBStanding Service Invocations\fR
 .ad
@@ -795,12 +733,10 @@ section summarizes these requirements. In addition to the port monitor itself,
 an administrative command must be supplied.
 .sp
 .ne 2
-.mk
 .na
 \fBInitial Environment\fR
 .ad
 .RS 23n
-.rt  
 When a port monitor is started, it expects an initial execution environment in
 which:
 .RS +4
@@ -858,22 +794,18 @@ The port monitor is running with user id 0 (root)
 
 .sp
 .ne 2
-.mk
 .na
 \fBImportant Files\fR
 .ad
 .RS 23n
-.rt  
 Relative to its current directory, the following key files exist for a port
 monitor.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB_config\fR\fR
 .ad
 .RS 17n
-.rt  
 The port monitor's configuration script. The port monitor configuration script
 is run by the SAC. The \fBSAC\fR is started by \fBinit\fR(1M) as a result of an
 entry in \fB/etc/inittab\fR that calls \fBsac\fR(1M).
@@ -881,58 +813,48 @@ entry in \fB/etc/inittab\fR that calls \fBsac\fR(1M).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB_pid\fR\fR
 .ad
 .RS 17n
-.rt  
 The file into which the port monitor writes its process id.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB_pmtab\fR\fR
 .ad
 .RS 17n
-.rt  
 The port monitor's administrative file. This file contains information about
 the ports and services for which the port monitor is responsible.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB_pmpipe\fR\fR
 .ad
 .RS 17n
-.rt  
 The\fB FIFO\fR through which the port monitor will receive messages from the
 \fBSAC.\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsvctag\fR\fR
 .ad
 .RS 17n
-.rt  
 The per-service configuration script for the service with the tag \fIsvctag\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\&../_sacpipe\fR\fR
 .ad
 .RS 17n
-.rt  
 The \fBFIFO\fR through which the port monitor will send messages to
 \fBsac\fR(1M).
 .RE
@@ -1037,7 +959,6 @@ per-service configuration script.
 
 .sp
 .ne 2
-.mk
 .na
 \fBThe Per-System Configuration File\fR
 .ad
@@ -1054,7 +975,6 @@ mode.
 
 .sp
 .ne 2
-.mk
 .na
 \fBPer-Port Monitor Configuration Files\fR
 .ad
@@ -1075,7 +995,6 @@ configuration script.
 
 .sp
 .ne 2
-.mk
 .na
 \fBPer-Service Configuration Files\fR
 .ad
@@ -1101,7 +1020,6 @@ keywords are defined: \fBassign\fR, \fBpush\fR, \fBpop\fR, \fBrunwait\fR, and
 in a command script may exceed 1024 characters.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBassign\fR \fIvariable\fR=\fIvalue\fR\fR
 .ad
@@ -1118,7 +1036,6 @@ invalid.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpush\fR \fImodule1\fR[,\fImodule2, module3\fR, . . .]\fR
 .ad
@@ -1134,7 +1051,6 @@ have already been pushed will be popped.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpop\fR [\fImodule\fR]\fR
 .ad
@@ -1151,7 +1067,6 @@ above the topmost driver are affected.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrunwait\fR \fBcommand\fR\fR
 .ad
@@ -1167,7 +1082,6 @@ status.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrun\fR \fBcommand\fR\fR
 .ad
@@ -1470,116 +1384,96 @@ struct sacmsg {
 This section gives a description of the \fBSAF\fR files and directories.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/saf/_sysconfig\fR\fR
 .ad
 .RS 28n
-.rt  
 The per-system configuration script.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/saf/_sactab\fR\fR
 .ad
 .RS 28n
-.rt  
 The \fBSAC's\fR administrative file. Contains information about the port
 monitors for which the SAC is responsible.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/saf/\fR\fIpmtag\fR\fR
 .ad
 .RS 28n
-.rt  
 The home directory for port monitor \fIpmtag\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/saf/\fR\fIpmtag\fR\fB/_config\fR\fR
 .ad
 .RS 28n
-.rt  
 The per-port monitor configuration script for port monitor pmtag.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/saf/\fR\fIpmtag\fR\fB/_pmtab\fR\fR
 .ad
 .RS 28n
-.rt  
 Port monitor pmtag's administrative file. Contains information about the
 services for which \fIpmtag\fR is responsible.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/saf/\fR\fIpmtag\fR\fB/\fR\fIsvctag\fR\fR
 .ad
 .RS 28n
-.rt  
 The file in which the per-service configuration script for service \fIsvctag\fR
 (available through port monitor  \fBpmtag\fR) is placed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/saf/\fR\fIpmtag\fR\fB/_pid\fR\fR
 .ad
 .RS 28n
-.rt  
 The file in which a port monitor writes its process id in the current directory
 and places an advisory lock on the file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/saf/\fR \fBpmtag\fR \fB/_pmpipe\fR\fR
 .ad
 .RS 28n
-.rt  
 The file in which the port monitor receives messages from the \fBSAC\fR and
 \fB\&../_sacpipe\fR and sends return messages to the \fBSAC.\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/saf/_log\fR\fR
 .ad
 .RS 28n
-.rt  
 The \fBSAC's\fR log file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/saf/\fR\fIpmtag\fR\fR
 .ad
 .RS 28n
-.rt  
 The directory for files created by port monitor \fIpmtag,\fR for example its
 log file.
 .RE
@@ -1590,23 +1484,19 @@ log file.
 The following administrative commands relate to \fBSAF.\fR
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsacadm\fR(1M)\fR
 .ad
 .RS 14n
-.rt  
 port monitor administrative command
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpmadm\fR(1M)\fR
 .ad
 .RS 14n
-.rt  
 service administration command
 .RE
 
diff --git a/usr/src/man/man1m/sar.1m b/usr/src/man/man1m/sar.1m
index 2131804c56..8641182475 100644
--- a/usr/src/man/man1m/sar.1m
+++ b/usr/src/man/man1m/sar.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH sar 1M "20 Aug 2004" "SunOS 5.11" "System Administration Commands"
+.TH SAR 1M "Aug 20, 2004"
 .SH NAME
 sar, sa1, sa2, sadc \- system activity report package
 .SH SYNOPSIS
@@ -19,7 +19,7 @@ sar, sa1, sa2, sadc \- system activity report package
 
 .LP
 .nf
-\fB/usr/lib/sa/sa2\fR [\fB-aAbcdgkmpqruvwy\fR] [\fB-e\fR \fItime\fR] [\fB-f\fR \fIfilename\fR] 
+\fB/usr/lib/sa/sa2\fR [\fB-aAbcdgkmpqruvwy\fR] [\fB-e\fR \fItime\fR] [\fB-f\fR \fIfilename\fR]
      [\fB-i\fR \fIsec\fR] [\fB-s\fR \fItime\fR]
 .fi
 
@@ -95,7 +95,6 @@ during the working day:
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/tmp/sa.adrfl\fR\fR
 .ad
@@ -106,7 +105,6 @@ address file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/sa/sa\fR\fBdd\fR\fR
 .ad
@@ -117,7 +115,6 @@ Daily data file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/sa/sar\fR\fBdd\fR\fR
 .ad
@@ -128,13 +125,12 @@ Daily report file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/spool/cron/crontabs/sys\fR\fR
 .ad
 .sp .6
 .RS 4n
- 
+
 .RE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/sasinfo.1m b/usr/src/man/man1m/sasinfo.1m
index 8ec61f6c69..739d98ee84 100644
--- a/usr/src/man/man1m/sasinfo.1m
+++ b/usr/src/man/man1m/sasinfo.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH sasinfo 1M "10 Jul 2009" "SunOS 5.11" "System Administration Commands"
+.TH SASINFO 1M "Jul 10, 2009"
 .SH NAME
 sasinfo \- Serial Attached SCSI HBA port command line interface
 .SH SYNOPSIS
@@ -59,7 +59,6 @@ that might be connected to those HBA ports.
 The following subcommands are supported by \fBsasinfo\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhba\fR\fR
 .ad
@@ -71,7 +70,6 @@ Lists information for the HBA referenced by the specified \fIHBA_name\fR.  If
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhba-port\fR\fR
 .ad
@@ -87,7 +85,6 @@ device, no HBA port is configured.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBexpander\fR\fR
 .ad
@@ -100,7 +97,6 @@ visible across all HBA ports on the host will be listed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtarget-port\fR\fR
 .ad
@@ -113,7 +109,6 @@ ports that are visible on the host will be listed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlogical-unit\fR | \fBlu\fR\fR
 .ad
@@ -130,7 +125,6 @@ including the SAS Management Protocol (SMP) target port.
 The following options are supported.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-?\fR, \fB--help\fR\fR
 .ad
@@ -141,7 +135,6 @@ Displays usage information
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR, \fB--hba\fR \fIHBA_Name\fR\fR
 .ad
@@ -153,7 +146,6 @@ The \fB-a\fR option can only be used with the \fBhba-port\fR subcommand.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR, \fB--phy-linkstat\fR\fR
 .ad
@@ -166,7 +158,6 @@ is specified. This option is used only with the \fBhba-port\fR subcommand.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIHBA_port_SAS_Addr\fR, \fB--port\fR \fIHBA_port_SAS_Addr\fR\fR
 .ad
@@ -179,7 +170,6 @@ HBA port on the host. The \fB-p\fR option can be used only with the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR, \fB--scsi\fR\fR
 .ad
@@ -191,7 +181,6 @@ option is only used for the \fBtarget-port\fR subcommand.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR, \fB--verbose\fR\fR
 .ad
@@ -203,7 +192,6 @@ and so forth, based on which subcommand is invoked.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR, \fB--version\fR\fR
 .ad
@@ -214,7 +202,6 @@ Displays the version information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-y\fR, \fB--phy\fR\fR
 .ad
@@ -737,13 +724,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/savecore.1m b/usr/src/man/man1m/savecore.1m
index 02d9b71a6a..a7e22c6e41 100644
--- a/usr/src/man/man1m/savecore.1m
+++ b/usr/src/man/man1m/savecore.1m
@@ -1,7 +1,7 @@
 '\" te
 .\" Copyright (c) 2004, Sun Microsystems, Inc. All Rights Reserved.
 .\" Copyright (c) 1983 Regents of the University of California. All rights reserved. The Berkeley software License Agreement specifies the terms and conditions for redistribution.
-.TH savecore 1M "25 Sep 2004" "SunOS 5.11" "System Administration Commands"
+.TH SAVECORE 1M "Sep 25, 2004"
 .SH NAME
 savecore \- save a crash dump of the operating system
 .SH SYNOPSIS
@@ -43,12 +43,10 @@ panic, \fBsavecore\fR logs the panic string too.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 15n
-.rt  
 Disregard dump header valid flag. Force \fBsavecore\fR to attempt to save a
 crash dump even if the header information stored on the dump device indicates
 the dump has already been saved.
@@ -56,12 +54,10 @@ the dump has already been saved.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIdumpfile\fR\fR
 .ad
 .RS 15n
-.rt  
 Attempt to save a crash dump from the specified file instead of from the
 system's current dump device. This option may be useful if the information
 stored on the dump device has been copied to an on-disk file by means of the
@@ -70,12 +66,10 @@ stored on the dump device has been copied to an on-disk file by means of the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR\fR
 .ad
 .RS 15n
-.rt  
 Save a crash dump of the live running Solaris system, without actually
 rebooting or altering the system in any way. This option forces \fBsavecore\fR
 to save a live snapshot of the system to the dump device, and then immediately
@@ -91,12 +85,10 @@ are not fully self-consistent.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 15n
-.rt  
 Verbose. Enables verbose error messages from \fBsavecore\fR.
 .RE
 
@@ -106,12 +98,10 @@ Verbose. Enables verbose error messages from \fBsavecore\fR.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdirectory\fR\fR
 .ad
 .RS 13n
-.rt  
 Save the crash dump files to the specified directory. If \fIdirectory\fR is not
 specified, \fBsavecore\fR saves the crash dump files to the default
 \fBsavecore\fR \fIdirectory\fR, configured by \fBdumpadm\fR(1M).
@@ -120,56 +110,46 @@ specified, \fBsavecore\fR saves the crash dump files to the default
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdirectory\fR\fB/vmcore.\fR\fIn\fR\fR
 .ad
 .RS 29n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdirectory\fR\fB/unix.\fR\fIn\fR\fR
 .ad
 .RS 29n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdirectory\fR\fB/bounds\fR\fR
 .ad
 .RS 29n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdirectory\fR\fB/minfree\fR\fR
 .ad
 .RS 29n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/crash/\&'uname \fR\fB-n\fR\fB\&'\fR\fR
 .ad
 .RS 29n
-.rt  
 default crash dump directory
 .RE
 
diff --git a/usr/src/man/man1m/sbdadm.1m b/usr/src/man/man1m/sbdadm.1m
index 76902300db..10468d5f97 100644
--- a/usr/src/man/man1m/sbdadm.1m
+++ b/usr/src/man/man1m/sbdadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH sbdadm 1M "20 Aug 2009" "SunOS 5.11" "System Administration Commands"
+.TH SBDADM 1M "Aug 20, 2009"
 .SH NAME
 sbdadm \- SCSI Block Disk command line interface
 .SH SYNOPSIS
@@ -45,7 +45,6 @@ you enter a question mark as an argument to the command (\fBsbdadm ?\fR),
 \fBsbdadm\fR responds with a help display.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcreate-lu\fR [\fB-s\fR, \fB--size\fR \fIsize\fR] \fIfilename\fR\fR
 .ad
@@ -56,67 +55,55 @@ option, \fIsize\fR is an integer followed by one of the following letters, to
 indicate a unit of size:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBk\fR\fR
 .ad
 .RS 5n
-.rt  
 kilobyte
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBm\fR\fR
 .ad
 .RS 5n
-.rt  
 megabyte
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBg\fR\fR
 .ad
 .RS 5n
-.rt  
 gigabyte
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBt\fR\fR
 .ad
 .RS 5n
-.rt  
 terabyte
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBp\fR\fR
 .ad
 .RS 5n
-.rt  
 petabyte
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBe\fR\fR
 .ad
 .RS 5n
-.rt  
 exabyte
 .RE
 
@@ -128,7 +115,6 @@ The size specified can exceed the size of the file or device.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelete-lu\fR \fIlu_name\fR\fR
 .ad
@@ -141,7 +127,6 @@ data on the logical unit remains intact.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBimport-lu\fR \fIlu_name\fR\fR
 .ad
@@ -156,7 +141,6 @@ command for this logical unit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist-lu\fR\fR
 .ad
@@ -168,7 +152,6 @@ command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmodify-lu\fR [\fB-s\fR, \fB--size\fR \fIsize\fR] \fIlu_name\fR |
 \fIfilename\fR\fR
@@ -191,7 +174,6 @@ The size specified can exceed the size of the file or device represented by
 \fBsbdadm\fR use the following operands:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfilename\fR\fR
 .ad
@@ -202,7 +184,6 @@ Name of an existing file or a fully qualified path to a raw block device.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIlu_name\fR\fR
 .ad
@@ -238,10 +219,10 @@ The following command lists all logical units.
 .in +2
 .nf
 # \fBsbdadm list-lu\fR
-Found 2 LU(s) 
+Found 2 LU(s)
 
-              	GUID           	   DATA SIZE    SOURCE 
---------------------------------  -----------  ------ 
+              	GUID           	   DATA SIZE    SOURCE
+--------------------------------  -----------  ------
 6000ae4000144f21d92c47b0dd650002  10737352704  /export/lun/0
 6000ae4000144f21d92c47b0de300032  134283264    /dev/rdsk/c1t1d0s0
 .fi
@@ -251,7 +232,6 @@ Found 2 LU(s)
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -262,7 +242,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnon-zero\fR\fR
 .ad
@@ -279,13 +258,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityObsolete Committed
+Interface Stability	Obsolete Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/scadm.1m b/usr/src/man/man1m/scadm.1m
index 02b0acdc6a..12f130839a 100644
--- a/usr/src/man/man1m/scadm.1m
+++ b/usr/src/man/man1m/scadm.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH scadm 1M "20 Dec 2005" "SunOS 5.11" "System Administration Commands"
+.TH SCADM 1M "Dec 20, 2005"
 .SH NAME
 scadm \- administer System Controller (SC)
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/platform/\fIplatform-name\fR/sbin/scadm\fR \fIsubcommand\fR [\fIoption\fR] 
+\fB/usr/platform/\fIplatform-name\fR/sbin/scadm\fR \fIsubcommand\fR [\fIoption\fR]
      [\fIargument\fR]...
 .fi
 
@@ -45,7 +45,6 @@ are separated from the command by a SPACE.
 The following subcommands are supported
 .sp
 .ne 2
-.mk
 .na
 \fBconsolehistory\fR
 .ad
@@ -91,7 +90,6 @@ and exit with non-zero status.
 
 .sp
 .ne 2
-.mk
 .na
 \fBdate\fR
 .ad
@@ -112,7 +110,6 @@ scadm date
 
 .sp
 .ne 2
-.mk
 .na
 \fBdownload\fR
 .ad
@@ -138,7 +135,6 @@ scadm download [boot] \fIfile\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fBfruhistory\fR
 .ad
@@ -184,7 +180,6 @@ and exit with non-zero status.
 
 .sp
 .ne 2
-.mk
 .na
 \fBhelp\fR
 .ad
@@ -205,7 +200,6 @@ scadm help
 
 .sp
 .ne 2
-.mk
 .na
 \fBloghistory\fR
 .ad
@@ -236,7 +230,6 @@ scadm loghistory [-a]
 
 .sp
 .ne 2
-.mk
 .na
 \fBresetrsc\fR
 .ad
@@ -259,7 +252,6 @@ scadm resetrsc [\fB-s\fR]
 
 .sp
 .ne 2
-.mk
 .na
 \fBsend_event\fR
 .ad
@@ -284,7 +276,6 @@ scadm send_event [\fB-c\fR] "\fImessage\fR"
 
 .sp
 .ne 2
-.mk
 .na
 \fBset\fR
 .ad
@@ -310,7 +301,6 @@ scadm set \fIvariable value\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fBshow\fR
 .ad
@@ -332,7 +322,6 @@ scadm show [\fIvariable\fR]
 
 .sp
 .ne 2
-.mk
 .na
 \fBshownetwork\fR
 .ad
@@ -344,7 +333,7 @@ The format for the \fBshownetwork\fR subcommand is:
 .sp
 .in +2
 .nf
-scadm shownetwork 
+scadm shownetwork
 .fi
 .in -2
 .sp
@@ -353,7 +342,6 @@ scadm shownetwork
 
 .sp
 .ne 2
-.mk
 .na
 \fBuseradd\fR
 .ad
@@ -375,7 +363,6 @@ scadm useradd \fIusername\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fBuserdel\fR
 .ad
@@ -396,7 +383,6 @@ scadm userdel \fIusername\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fBuserpassword\fR
 .ad
@@ -419,7 +405,6 @@ scadm userpassword \fIusername\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fBuserperm\fR
 .ad
@@ -440,7 +425,6 @@ scadm userperm \fIusername\fR [aucr]
 
 .sp
 .ne 2
-.mk
 .na
 \fBusershow\fR
 .ad
@@ -462,7 +446,6 @@ scadm usershow \fIusername\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fBversion\fR
 .ad
@@ -492,7 +475,6 @@ separated from the subcommand by a SPACE.
 The \fBresetrsc\fR subcommand supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
@@ -508,7 +490,6 @@ reset, for a soft reset.
 The \fBsend_event\fR subcommand supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
@@ -522,7 +503,6 @@ Send a critical event. Without the \fB-c\fR, \fB-send_event\fR sends a warning.
 The \fBversion\fR subcommand supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -537,7 +517,6 @@ The \fBconsolehistory\fR, \fBfruhistory\fR, and \fBloghistory\fR subcommands
 support the following option:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -565,7 +544,6 @@ they are separated from each other by a SPACE.
 The \fBdownload\fR subcommand supports the following arguments:
 .sp
 .ne 2
-.mk
 .na
 \fBboot\fR
 .ad
@@ -577,7 +555,6 @@ programmed without any arguments
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfile\fR\fR
 .ad
@@ -611,7 +588,6 @@ or
 The \fBsend_event\fR subcommand supports the following arguments:
 .sp
 .ne 2
-.mk
 .na
 \fB"\fImessage\fR"\fR
 .ad
@@ -626,7 +602,6 @@ in quotation marks.
 The \fBset\fR subcommand supports the following arguments:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIvariable\fR\fR
 .ad
@@ -637,7 +612,6 @@ Set SC configuration \fIvariable\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIvalue\fR\fR
 .ad
@@ -651,7 +625,6 @@ Set SC configuration variable to \fIvalue\fR.
 The \fBshow\fR subcommand supports the following arguments:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIvariable\fR\fR
 .ad
@@ -665,7 +638,6 @@ Display the value of that particular variable.
 The \fBuseradd\fR subcommand supports the following arguments:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIusername\fR\fR
 .ad
@@ -679,7 +651,6 @@ Add new SC account \fIusername\fR.
 The \fBuserdel\fR subcommand supports the following arguments:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIusername\fR\fR
 .ad
@@ -693,7 +664,6 @@ Remove SC account \fIusername\fR.
 The \fBuserperm\fR subcommand supports the following arguments:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-aucr\fR\fR
 .ad
@@ -705,7 +675,6 @@ permissions are disabled and read only access is assigned.
 The following are the definitions for permissions:
 .sp
 .ne 2
-.mk
 .na
 \fBa\fR
 .ad
@@ -716,7 +685,6 @@ Allow user to administer or change the SC configuration variables
 
 .sp
 .ne 2
-.mk
 .na
 \fBu\fR
 .ad
@@ -727,7 +695,6 @@ Allow user to use the user commands to modify SC accounts
 
 .sp
 .ne 2
-.mk
 .na
 \fBc\fR
 .ad
@@ -738,7 +705,6 @@ Allow user to connect to console.
 
 .sp
 .ne 2
-.mk
 .na
 \fBr\fR
 .ad
@@ -751,7 +717,6 @@ Allow user to reset SC and to power on and off the host.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIusername\fR\fR
 .ad
@@ -765,7 +730,6 @@ Change permissions on SC account \fIusername\fR.
 The \fB-usershow\fR subcommand supports the following arguments:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIusername\fR\fR
 .ad
@@ -780,7 +744,6 @@ specified, all accounts are displayed.
 The \fBuserpassword\fR subcommand supports the following arguments:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIusername\fR\fR
 .ad
@@ -794,7 +757,6 @@ Set SC password for \fIusername\fR.
 The \fBuserperm\fR subcommand supports the following arguments:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIusername\fR\fR
 .ad
@@ -1072,7 +1034,6 @@ scadm version \fB-v\fR
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -1083,7 +1044,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnon-zero\fR\fR
 .ad
@@ -1100,13 +1060,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/sckmd.1m b/usr/src/man/man1m/sckmd.1m
index 5eed9afdfa..2cf70a5a04 100644
--- a/usr/src/man/man1m/sckmd.1m
+++ b/usr/src/man/man1m/sckmd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH sckmd 1M "25 Apr 2006" "SunOS 5.11" "System Administration Commands"
+.TH SCKMD 1M "Apr 25, 2006"
 .SH NAME
 sckmd \- Sun cryptographic key management daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/platform/sun4u/lib/sckmd\fR 
+\fB/usr/platform/sun4u/lib/sckmd\fR
 .fi
 
 .SH DESCRIPTION
@@ -49,13 +49,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/scmadm.1m b/usr/src/man/man1m/scmadm.1m
index 221bb1b456..82e49af38b 100644
--- a/usr/src/man/man1m/scmadm.1m
+++ b/usr/src/man/man1m/scmadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH scmadm 1M "3 August 2006" "SunOS 5.11" "System Administration Commands"
+.TH SCMADM 1M "Aug 3, 2006"
 .SH NAME
 scmadm \- storage cache manager administration utility
 .SH SYNOPSIS
@@ -60,7 +60,6 @@ descriptors with disknames, options, and global options. The \fBscmadm\fR
 command supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -71,7 +70,6 @@ Displays usage information for the \fBscmadm\fR command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
@@ -83,7 +81,6 @@ parameters. See \fBdscfg\fR(1M).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -94,7 +91,6 @@ Shuts down the storage device cache.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -105,7 +101,6 @@ Displays the cache version number.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR [\fIparameter\fR[=[\fIvalue\fR]] ...]\fR
 .ad
@@ -125,7 +120,6 @@ parameter takes effect only when the cache is next restarted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR { \fBsystem\fR | \fBcd\fR | \fIdiskname\fR } [\fIoption\fR]\fR
 .ad
@@ -142,7 +136,6 @@ specified, current options are displayed. The \fBrdcache\fR option is set as
 the default. The \fIoption\fRs are defined as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrdcache\fR\fR
 .ad
@@ -153,7 +146,6 @@ Data blocks are likely to be referenced again and should remain in cache.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnordcache\fR\fR
 .ad
@@ -167,7 +159,6 @@ recently used, so that other blocks can remain in the cache longer.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR { \fBcd\fR | \fIdiskname\fR | \fBall\fR }\fR
 .ad
@@ -194,13 +185,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/sconadm.1m b/usr/src/man/man1m/sconadm.1m
index 75ba1db835..98cf1b064f 100644
--- a/usr/src/man/man1m/sconadm.1m
+++ b/usr/src/man/man1m/sconadm.1m
@@ -3,24 +3,24 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH sconadm 1M "27 Feb 2006" "SunOS 5.11" "System Administration Commands"
+.TH SCONADM 1M "Feb 27, 2006"
 .SH NAME
 sconadm \- register system information
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/sconadm\fR register \fB-a\fR 
-     [\fB-e\fR softwareUpdate | \fB-E\fR softwareUpdate] 
-     [\fB-h\fR \fIhostname\fR] [\fB-l\fR \fIlogfile\fR] [\fB-N\fR] 
-     [\fB-p\fR \fIproxy_host\fR[:\fIproxy_port\fR]] 
-     [\fB-r\fR \fIregistration_profile\fR] [\fB-u\fR \fIusername\fR] 
+\fB/usr/sbin/sconadm\fR register \fB-a\fR
+     [\fB-e\fR softwareUpdate | \fB-E\fR softwareUpdate]
+     [\fB-h\fR \fIhostname\fR] [\fB-l\fR \fIlogfile\fR] [\fB-N\fR]
+     [\fB-p\fR \fIproxy_host\fR[:\fIproxy_port\fR]]
+     [\fB-r\fR \fIregistration_profile\fR] [\fB-u\fR \fIusername\fR]
      [\fB-x\fR \fIproxy_username\fR]
 .fi
 
 .LP
 .nf
-\fB/usr/sbin/sconadm\fR proxy [\fB-l\fR \fIlogfile\fR] 
-     [\fB-p\fR \fIproxy_host\fR[:\fIproxy_port\fR]] 
+\fB/usr/sbin/sconadm\fR proxy [\fB-l\fR \fIlogfile\fR]
+     [\fB-p\fR \fIproxy_host\fR[:\fIproxy_port\fR]]
      [\fB-r\fR \fIregistration_profile\fR] [\fB-x\fR \fIproxy_username\fR]
 .fi
 
@@ -51,113 +51,93 @@ part of a listing of processes on a system.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 30n
-.rt  
 Accept "Terms of Use and Binary Code License". Absence of this option means
 that you do not accept the license.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR softwareUpdate\fR
 .ad
 .RS 30n
-.rt  
 Enable client to be managed at the Sun-hosted Update Connection Service.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-E\fR softwareUpdate\fR
 .ad
 .RS 30n
-.rt  
 Disable client's ability to be managed at the Sun-hosted Update Connection
 Service.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIhostname\fR\fR
 .ad
 .RS 30n
-.rt  
 Hostname of the machine you want to register.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlogfile\fR\fR
 .ad
 .RS 30n
-.rt  
 Pathname of log file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-N\fR\fR
 .ad
 .RS 30n
-.rt  
 Never register.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIproxy_host\fR[:\fIproxy_port\fR]\fR
 .ad
 .RS 30n
-.rt  
 Proxy host name and optional proxy port number.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIregistration_profile\fR\fR
 .ad
 .RS 30n
-.rt  
 Pathname to a registration profile.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIusername\fR\fR
 .ad
 .RS 30n
-.rt  
 User name (a Sun Online Account).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fIproxy_username\fR\fR
 .ad
 .RS 30n
-.rt  
 User name on the proxy host.
 .RE
 
@@ -441,30 +421,25 @@ Run the command:
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Success.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/breg/data/RegistrationProfile.properties\fR\fR
 .ad
@@ -481,13 +456,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/sdpadm.1m b/usr/src/man/man1m/sdpadm.1m
index 727c8de526..54b808eab4 100644
--- a/usr/src/man/man1m/sdpadm.1m
+++ b/usr/src/man/man1m/sdpadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH sdpadm 1M "22 Dec 2008" "SunOS 5.11" "System Administration Commands"
+.TH SDPADM 1M "Dec 22, 2008"
 .SH NAME
 sdpadm \- SDP system configuration administration
 .SH SYNOPSIS
@@ -28,34 +28,28 @@ using \fBsdpadm\fR \fBenable\fR.
 The following subcommands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstatus\fR\fR
 .ad
 .RS 11n
-.rt  
 Displays the system status of the SDP protocol
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBenable\fR\fR
 .ad
 .RS 11n
-.rt  
 Enables the SDP protocol
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisable\fR\fR
 .ad
 .RS 11n
-.rt  
 Disables the SDP protocol
 .RE
 
@@ -74,13 +68,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/sendmail.1m b/usr/src/man/man1m/sendmail.1m
index 52ecb08dc9..8fbf6c870b 100644
--- a/usr/src/man/man1m/sendmail.1m
+++ b/usr/src/man/man1m/sendmail.1m
@@ -6,19 +6,19 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH sendmail 1M "25 Feb 2009" "SunOS 5.11" "System Administration Commands"
+.TH SENDMAIL 1M "Feb 25, 2009"
 .SH NAME
 sendmail \- send mail over the internet
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/sendmail\fR [\fB-Ac\fR] [\fB-Am\fR] [\fB-ba\fR] [\fB-bD\fR] [\fB-bd\fR] [\fB-bi\fR] [\fB-bl\fR] 
+\fB/usr/lib/sendmail\fR [\fB-Ac\fR] [\fB-Am\fR] [\fB-ba\fR] [\fB-bD\fR] [\fB-bd\fR] [\fB-bi\fR] [\fB-bl\fR]
      [\fB-bm\fR] [\fB-bp\fR] [\fB-bP\fR] [\fB-bs\fR] [\fB-bt\fR] [\fB-bv\fR] [\fB-B\fR \fItype\fR] [\fB-C\fR \fIfile\fR]
-     [\fB-D\fR \fIlogfile\fR] [\fB-d\fR \fIX\fR] [\fB-F\fR \fIfullname\fR] [\fB-f\fR \fIname\fR] [\fB-G\fR] 
-     [\fB-h\fR \fIN\fR] [\fB-L \fItag\fR\fR] [\fB-M\fR x\fIvalue\fR] [\fB-N\fR \fInotifications\fR] [\fB-n\fR] 
-     [\fB-O\fR\fIoption\fR =\fIvalue\fR] [\fB-o\fR x\fIvalue\fR] [\fB-p\fR \fIprotocol\fR] 
-     [\fB-Q\fR [\fIreason\fR]] [\fB-q\fR [\fItime\fR]] [\fB-q\fR \fIXstring\fR] [\fB-R\fR \fIret\fR] 
-     [\fB-r\fR \fIname\fR] [\fB-t\fR] [\fB-V\fR \fIenvid\fR] [\fB-v\fR] [\fB-X\fR \fIlogfile\fR] 
+     [\fB-D\fR \fIlogfile\fR] [\fB-d\fR \fIX\fR] [\fB-F\fR \fIfullname\fR] [\fB-f\fR \fIname\fR] [\fB-G\fR]
+     [\fB-h\fR \fIN\fR] [\fB-L \fItag\fR\fR] [\fB-M\fR x\fIvalue\fR] [\fB-N\fR \fInotifications\fR] [\fB-n\fR]
+     [\fB-O\fR\fIoption\fR =\fIvalue\fR] [\fB-o\fR x\fIvalue\fR] [\fB-p\fR \fIprotocol\fR]
+     [\fB-Q\fR [\fIreason\fR]] [\fB-q\fR [\fItime\fR]] [\fB-q\fR \fIXstring\fR] [\fB-R\fR \fIret\fR]
+     [\fB-r\fR \fIname\fR] [\fB-t\fR] [\fB-V\fR \fIenvid\fR] [\fB-v\fR] [\fB-X\fR \fIlogfile\fR]
      [\fIaddress\fR]...
 .fi
 
@@ -69,7 +69,7 @@ The \fBsendmail\fR service is managed by the service management facility,
 .nf
 svc:/network/smtp:sendmail
 svc:/network/sendmail-client:default
- 
+
 .fi
 .in -2
 .sp
@@ -179,7 +179,6 @@ You can use the following variables in the \fB/etc/default/sendmail\fR startup
 file:
 .sp
 .ne 2
-.mk
 .na
 \fBCLIENTOPTIONS=\fIstring\fR\fR
 .ad
@@ -193,7 +192,6 @@ this variable.
 
 .sp
 .ne 2
-.mk
 .na
 \fBCLIENTQUEUEINTERVAL=\fI#\fR\fR
 .ad
@@ -211,7 +209,6 @@ client-only queue, then acts as a client queue processor.
 
 .sp
 .ne 2
-.mk
 .na
 \fBETRN_HOSTS=\fIstring\fR\fR
 .ad
@@ -225,7 +222,6 @@ information, refer to the \fBetrn\fR(1M) man page.
 
 .sp
 .ne 2
-.mk
 .na
 \fBMODE=-bd\fR
 .ad
@@ -237,7 +233,6 @@ leave it undefined.
 
 .sp
 .ne 2
-.mk
 .na
 \fBOPTIONS=\fIstring\fR\fR
 .ad
@@ -249,7 +244,6 @@ checking is done, so be careful when making changes to this variable.
 
 .sp
 .ne 2
-.mk
 .na
 \fBQUEUEINTERVAL=\fI#\fR\fR
 .ad
@@ -265,7 +259,6 @@ the entry does not end with an appropriate letter, the interval is ignored and
 
 .sp
 .ne 2
-.mk
 .na
 \fBQUEUEOPTIONS=p\fR
 .ad
@@ -288,7 +281,6 @@ information, see \fB/usr/include/libmilter/README\fR and http://www.milter.org
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Ac\fR\fR
 .ad
@@ -300,7 +292,6 @@ mail submission.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Am\fR\fR
 .ad
@@ -312,7 +303,6 @@ submission.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-ba\fR\fR
 .ad
@@ -325,7 +315,6 @@ and all messages are generated with a RETURN-LINEFEED at the end. Also, the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-bd\fR\fR
 .ad
@@ -336,7 +325,6 @@ Runs as a daemon in the background, waiting for incoming SMTP connections.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-bD\fR\fR
 .ad
@@ -347,7 +335,6 @@ Runs as a daemon in the foreground, waiting for incoming SMTP connections.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-bi\fR\fR
 .ad
@@ -360,7 +347,6 @@ use of this option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-bl\fR\fR
 .ad
@@ -371,7 +357,6 @@ Runs as a daemon (like \fB-bd\fR) but accepts only loopback SMTP connections.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-bm\fR\fR
 .ad
@@ -382,7 +367,6 @@ Delivers mail in the usual way (default).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-bp\fR\fR
 .ad
@@ -393,7 +377,6 @@ Prints a summary of the mail queues.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-bP\fR\fR
 .ad
@@ -405,7 +388,6 @@ shared memory support.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-bs\fR\fR
 .ad
@@ -417,7 +399,6 @@ operations of the \fB-ba\fR flag that are compatible with \fBSMTP\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-bt\fR\fR
 .ad
@@ -429,7 +410,6 @@ parsing; it is used for debugging configuration tables.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-bv\fR\fR
 .ad
@@ -441,7 +421,6 @@ is normally used for validating users or mailing lists.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-B\fR \fItype\fR\fR
 .ad
@@ -452,7 +431,6 @@ Indicates body \fItype\fR (\fB7BIT\fR or \fB8BITMIME\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR \fIfile\fR\fR
 .ad
@@ -463,7 +441,6 @@ Uses alternate configuration file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR \fIlogfile\fR\fR
 .ad
@@ -474,7 +451,6 @@ Send debugging output to the indicated log file instead of \fBstdout\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIX\fR\fR
 .ad
@@ -485,7 +461,6 @@ Sets debugging value to \fIX\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIname\fR\fR
 .ad
@@ -496,7 +471,6 @@ Sets the name of the "from" person (that is, the sender of the mail).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fIfullname\fR\fR
 .ad
@@ -507,7 +481,6 @@ Sets the full name of the sender.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-G\fR\fR
 .ad
@@ -522,7 +495,6 @@ in this mode.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIN\fR\fR
 .ad
@@ -535,7 +507,6 @@ message, the victim of an aliasing loop.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR \fItag\fR\fR
 .ad
@@ -546,7 +517,6 @@ Sets the identifier used in \fBsyslog\fR messages to the supplied \fItag\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-M\fR\fIxvalue\fR\fR
 .ad
@@ -557,7 +527,6 @@ Sets macro \fIx\fR to the specified \fIvalue\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -568,7 +537,6 @@ Does not do aliasing.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-N\fR \fInotifications\fR\fR
 .ad
@@ -582,7 +550,6 @@ stuck in a queue somwhere. The default is "FAILURE,DELAY".
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fIxvalue\fR\fR
 .ad
@@ -594,7 +561,6 @@ Sets option \fIx\fR to the specified \fIvalue\fR. \fBProcessing\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-O\fR\fIoption=value\fR\fR
 .ad
@@ -606,7 +572,6 @@ Sets \fIoption\fR to the specified \fIvalue\fR (for long from names).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIprotocol\fR\fR
 .ad
@@ -622,7 +587,6 @@ to \fBUUCP\fR and the sending host to \fBuunet\fR. Some existing programs use
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR[\fItime\fR]\fR
 .ad
@@ -640,7 +604,6 @@ with \fB-bd\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-qp[\fR\fItime\fR\fB-]\fR\fR
 .ad
@@ -656,7 +619,6 @@ the previous queue run.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-qf\fR\fR
 .ad
@@ -668,7 +630,6 @@ in the foreground.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-qG\fR \fIname\fR\fR
 .ad
@@ -679,7 +640,6 @@ Processes jobs in queue group called \fIname\fR only.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q[!]I\fR \fIsubstr\fR\fR
 .ad
@@ -691,7 +651,6 @@ queue \fBID\fR or not when \fB!\fR is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q[!]Q\fR \fIsubstr\fR\fR
 .ad
@@ -703,7 +662,6 @@ substring of the quarantine \fIreason\fR or not when \fB!\fR is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q[!]R\fR \fIsubstr\fR\fR
 .ad
@@ -715,7 +673,6 @@ the recipients or not when \fB!\fR is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q[!]S\fR \fIsubstr\fR\fR
 .ad
@@ -727,7 +684,6 @@ sender or not when \fB!\fR is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Q\fR[\fIreason\fR]\fR
 .ad
@@ -740,7 +696,6 @@ some sort of item matching as described above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIname\fR\fR
 .ad
@@ -751,7 +706,6 @@ An alternate and obsolete form of the \fB-f\fR flag.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIret\fR\fR
 .ad
@@ -763,7 +717,6 @@ can be \fBHDRS\fR for headers only or \fBFULL\fR for headers plus body.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
@@ -778,7 +731,6 @@ when no legal recipients are included in the message.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -789,7 +741,6 @@ Goes into verbose mode. Alias expansions are announced, and so forth.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR \fIenvid\fR\fR
 .ad
@@ -801,7 +752,6 @@ returned if the message bounces.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-X\fR \fIlogfile\fR\fR
 .ad
@@ -854,7 +804,6 @@ the list below, the multiple character name is presented first followed by the
 single character syntax enclosed in parentheses.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBAliasFile (A\fR\fIfile\fR\fB)\fR\fR
 .ad
@@ -865,7 +814,6 @@ Specifies possible alias files.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBAliasWait (a\fR \fIN\fR\fB)\fR\fR
 .ad
@@ -878,7 +826,6 @@ minutes, issues a warning. Defaults to 10 minutes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBAllowBogusHELO\fR\fR
 .ad
@@ -890,7 +837,6 @@ this option is disabled.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBBadRcptThrottle=\fR\fIN\fR\fR
 .ad
@@ -902,7 +848,6 @@ envelope are rejected, sleeps for one second after each rejected RCPT command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBBlankSub (B\fR\fIc\fR\fB)\fR\fR
 .ad
@@ -914,7 +859,6 @@ are replaced by this character. Defaults to SPACE (that is, no change is made).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCACertFile\fR\fR
 .ad
@@ -925,7 +869,6 @@ File containing one CA cert.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCACertPath\fR\fR
 .ad
@@ -936,7 +879,6 @@ Path to directory with certs of CAs.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCheckAliases (n)\fR\fR
 .ad
@@ -947,7 +889,6 @@ Validates the RHS of aliases when rebuilding the \fBaliases\fR(4) database.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCheckpointInterval (C\fR\fIN\fR\fB)\fR\fR
 .ad
@@ -960,7 +901,6 @@ any but the last \fIN\fR recipients.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBClassFactor (z\fR\fIfact\fR\fB)\fR\fR
 .ad
@@ -974,7 +914,6 @@ higher \fBPriority:\fR are favored. Defaults to \fB1800\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBClientCertFile\fR\fR
 .ad
@@ -986,7 +925,6 @@ File containing the cert of the client, that is, this cert is used when
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBClientKeyFile\fR\fR
 .ad
@@ -997,7 +935,6 @@ File containing the private key belonging to the client cert.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBClientPortOptions\fR\fR
 .ad
@@ -1007,7 +944,6 @@ Sets client \fBSMTP\fR options. The options are key=value pairs. Known keys
 are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBAddr\fR \fIAddress Mask\fR\fR
 .ad
@@ -1019,7 +955,6 @@ numeric address in dot notation or a network name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFamily\fR\fR
 .ad
@@ -1030,7 +965,6 @@ Address family (defaults to INET).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBListen\fR\fR
 .ad
@@ -1041,7 +975,6 @@ Size of listen queue (defaults to 10).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPort\fR\fR
 .ad
@@ -1052,7 +985,6 @@ Name/number of listening port (defaults to \fBsmtp\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRcvBufSize\fR\fR
 .ad
@@ -1063,7 +995,6 @@ The size of the TCP/IP receive buffer.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSndBufSize\fR\fR
 .ad
@@ -1074,7 +1005,6 @@ The size of the TCP/IP send buffer.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBModifier\fR\fR
 .ad
@@ -1083,7 +1013,6 @@ The size of the TCP/IP send buffer.
 Options (flags) for the daemon. Can be:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBh\fR\fR
 .ad
@@ -1101,7 +1030,6 @@ used for the \fBHELO\fR/\fBEHLO\fR command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBColonOkInAddr\fR\fR
 .ad
@@ -1114,7 +1042,6 @@ is on for version 5 and lower configuration files.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBConnectionCacheSize (k\fR\fIN\fR\fB)\fR\fR
 .ad
@@ -1129,7 +1056,6 @@ connections are closed immediately.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBConnectionCacheTimeout (K\fR\fItimeout\fR\fB)\fR\fR
 .ad
@@ -1147,7 +1073,6 @@ excessive resources on the other end. The default is five minutes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBConnectionRateThrottle\fR\fR
 .ad
@@ -1160,7 +1085,6 @@ there is no limit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBConnectionRateWindowSize\fR\fR
 .ad
@@ -1172,7 +1096,6 @@ is maintained. The default is 60 seconds.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBControlSocketName\fR\fR
 .ad
@@ -1191,7 +1114,6 @@ for the socket name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCRLFile\fR\fR
 .ad
@@ -1203,7 +1125,6 @@ authentication.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDaemonPortOptions (O\fR\fIoptions\fR\fB)\fR\fR
 .ad
@@ -1213,7 +1134,6 @@ Sets server SMTP options. The options are \fIkey=value\fR pairs. Known keys
 are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBName\fR\fR
 .ad
@@ -1225,7 +1145,6 @@ error messages and logging.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBAddr\fR\fR
 .ad
@@ -1238,7 +1157,6 @@ The address mask may be a numeric address in dot notation or a network name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFamily\fR\fR
 .ad
@@ -1249,7 +1167,6 @@ Address family (defaults to \fBINET).\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBInputMailFilters\fR\fR
 .ad
@@ -1260,7 +1177,6 @@ List of input mail filters for the daemon.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBListen\fR\fR
 .ad
@@ -1271,7 +1187,6 @@ Size of listen queue (defaults to \fB10\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBModifier\fR\fR
 .ad
@@ -1280,7 +1195,6 @@ Size of listen queue (defaults to \fB10\fR).
 Options (flags) for the daemon; can be a sequence (without any delimiters) of:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBa\fR\fR
 .ad
@@ -1291,7 +1205,6 @@ Requires authentication.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBb\fR\fR
 .ad
@@ -1302,7 +1215,6 @@ Binds to interface through which mail has been received.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBc\fR\fR
 .ad
@@ -1313,7 +1225,6 @@ Performs hostname canonification (\fB\&.cf\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBf\fR\fR
 .ad
@@ -1324,7 +1235,6 @@ Requires fully qualified hostname (\fB\&.cf\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBh\fR\fR
 .ad
@@ -1335,7 +1245,6 @@ Uses name of interface for \fBHELO\fR command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBu\fR\fR
 .ad
@@ -1346,7 +1255,6 @@ Allows unqualified addresses (\fB\&.cf\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBC\fR\fR
 .ad
@@ -1357,7 +1265,6 @@ Does not perform hostname canonification.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBE\fR\fR
 .ad
@@ -1370,7 +1277,6 @@ Disallows \fBETRN\fR (see \fBRFC\fR 2476).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBName\fR\fR
 .ad
@@ -1382,7 +1288,6 @@ messages and logging.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPort\fR\fR
 .ad
@@ -1393,7 +1298,6 @@ Name/number of listening port (defaults to \fBsmtp\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBReceiveSize\fR\fR
 .ad
@@ -1404,7 +1308,6 @@ The size of the TCP/IP receive buffer.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSendSize\fR\fR
 .ad
@@ -1415,7 +1318,6 @@ The size of the TCP/IP send buffer.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBchildren\fR\fR
 .ad
@@ -1426,7 +1328,6 @@ Maximum number of children per daemon. See \fBMaxDaemonChildren\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDeliveryMode\fR\fR
 .ad
@@ -1437,7 +1338,6 @@ Delivery mode per daemon. See \fBDeliveryMode\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrefuseLA\fR\fR
 .ad
@@ -1448,7 +1348,6 @@ Delivery mode per daemon. See \fBDeliveryMode\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelayLA\fR\fR
 .ad
@@ -1459,7 +1358,6 @@ Delivery mode per daemon. See \fBDeliveryMode\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBqueueLA\fR\fR
 .ad
@@ -1474,7 +1372,6 @@ Delivery mode per daemon. See \fBDeliveryMode\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDataFileBufferSize\fR\fR
 .ad
@@ -1486,7 +1383,6 @@ disk-based. The default is 4096 bytes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDeadLetterDrop\fR\fR
 .ad
@@ -1502,7 +1398,6 @@ could not be opened.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDefaultCharSet\fR\fR
 .ad
@@ -1514,7 +1409,6 @@ MIME.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDefaultUser (g\fR\fIgid\fR\fB) or (u\fR\fIuid\fR\fB)\fR\fR
 .ad
@@ -1527,7 +1421,6 @@ given as a symbolic group or user name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDelayLA=\fR\fILA\fR\fR
 .ad
@@ -1539,7 +1432,6 @@ second on most SMTP commands and before accepting connections.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDeliverByMin=\fR\fItime\fR\fR
 .ad
@@ -1553,7 +1445,6 @@ keyword \fBDELIVERBY\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDeliveryMode (d\fR\fIx\fR\fB)\fR\fR
 .ad
@@ -1562,7 +1453,6 @@ keyword \fBDELIVERBY\fR.
 Delivers in mode \fIx\fR. Legal modes are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBi\fR\fR
 .ad
@@ -1573,7 +1463,6 @@ Delivers interactively (synchronously).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBb\fR\fR
 .ad
@@ -1584,7 +1473,6 @@ Delivers in background (asynchronously).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBd\fR\fR
 .ad
@@ -1595,7 +1483,6 @@ Deferred mode. Database lookups are deferred until the actual queue run.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBq\fR\fR
 .ad
@@ -1610,7 +1497,6 @@ given no argument (that is, \fBOd\fR is equivalent to \fBOdi\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDHParameters\fR\fR
 .ad
@@ -1621,7 +1507,6 @@ File containing the DH parameters.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDialDelay\fR\fR
 .ad
@@ -1633,7 +1518,6 @@ not retry".
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDontBlameSendmail\fR\fR
 .ad
@@ -1646,7 +1530,6 @@ more information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDontExpandCnames\fR\fR
 .ad
@@ -1658,7 +1541,6 @@ records.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDontInitGroups\fR\fR
 .ad
@@ -1671,7 +1553,6 @@ permissions.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDontProbeInterfaces\fR\fR
 .ad
@@ -1685,7 +1566,6 @@ configuration error.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDontPruneRoutes (R)\fR\fR
 .ad
@@ -1696,7 +1576,6 @@ If set, does not prune route-addr syntax addresses to the minimum possible.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDoubleBounceAddress\fR\fR
 .ad
@@ -1708,7 +1587,6 @@ error message to this address.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEightBitMode (8)\fR\fR
 .ad
@@ -1719,7 +1597,6 @@ key can selected by using just the first character, but using the full word is
 better for clarity.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmimify\fR\fR
 .ad
@@ -1730,7 +1607,6 @@ Does any necessary conversion of \fB8BITMIME\fR to 7-bit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpass\fR\fR
 .ad
@@ -1741,7 +1617,6 @@ Passes unlabeled 8-bit input through as is.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstrict\fR\fR
 .ad
@@ -1754,7 +1629,6 @@ Rejects unlabeled 8-bit input.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBErrorHeader (E\fR\fIfile/message\fR\fB)\fR\fR
 .ad
@@ -1771,7 +1645,6 @@ is printed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBErrorMode (e\fR\fIx\fR\fB)\fR\fR
 .ad
@@ -1780,7 +1653,6 @@ is printed.
 Disposes of errors using mode \fIx\fR. The values for \fIx\fR are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBe\fR\fR
 .ad
@@ -1791,7 +1663,6 @@ Mails back errors and gives \fB0\fR exit status always.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBm\fR\fR
 .ad
@@ -1802,7 +1673,6 @@ Mails back errors.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBp\fR\fR
 .ad
@@ -1813,7 +1683,6 @@ Prints error messages (default).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBq\fR\fR
 .ad
@@ -1824,7 +1693,6 @@ No messages, just gives exit status.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBw\fR\fR
 .ad
@@ -1837,7 +1705,6 @@ Writes back errors (mail if user not logged in).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFallbackMXhost (V\fR\fIfallbackhost\fR\fB)\fR\fR
 .ad
@@ -1849,7 +1716,6 @@ host. This is intended to be used by sites with poor network connectivity.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFallBackSmartHost\fR\fR
 .ad
@@ -1863,7 +1729,6 @@ domain but not outside.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFastSplit\fR\fR
 .ad
@@ -1884,7 +1749,6 @@ the number of processes to deliver the envelopes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBForkEachJob (Y)\fR\fR
 .ad
@@ -1897,7 +1761,6 @@ considerable amounts of memory while the queue is being processed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBForwardPath (J\fR\fIpath\fR\fB)\fR\fR
 .ad
@@ -1916,7 +1779,6 @@ exist). Refer to the NOTES section for more information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBHeloName=\fIname\fR\fR\fR
 .ad
@@ -1927,7 +1789,6 @@ Sets the name to be used for \fBHELO\fR/\fBEHLO\fR (instead of \fB$j\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBHelpFile (H\fR\fIfile\fR\fB)\fR\fR
 .ad
@@ -1938,7 +1799,6 @@ Specifies the help file for SMTP.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBHoldExpensive (c)\fR\fR
 .ad
@@ -1950,7 +1810,6 @@ immediately.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBHostsFile\fR\fR
 .ad
@@ -1961,7 +1820,6 @@ Sets the file to use when doing "file" type access of host names.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBHostStatusDirectory\fR\fR
 .ad
@@ -1974,7 +1832,6 @@ relative to the queue directory.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBIgnoreDots (i)\fR\fR
 .ad
@@ -1986,7 +1843,6 @@ always accepted) when reading \fBSMTP\fR mail.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLogLevel (L\fR\fIn\fR\fB)\fR\fR
 .ad
@@ -1997,7 +1853,6 @@ Sets the default log level to \fIn\fR. Defaults to \fB9\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB(M\fR\fIx\|value\fR\fB)\fR\fR
 .ad
@@ -2009,7 +1864,6 @@ command line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMailboxDatabase\fR\fR
 .ad
@@ -2022,7 +1876,6 @@ the source code, see \fBlibsm/mbdb.c\fR for details.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMatchGECOS (G)\fR\fR
 .ad
@@ -2035,7 +1888,6 @@ well as the login name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMaxDaemonChildren\fR\fR
 .ad
@@ -2047,7 +1899,6 @@ connections are rejected. If not set or <=0, there is no limit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMaxHopCount (h\fR\fIN\fR\fB)\fR\fR
 .ad
@@ -2059,7 +1910,6 @@ times are assumed to be in a loop and are rejected. Defaults to \fB25\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMaxMessageSize\fR\fR
 .ad
@@ -2070,7 +1920,6 @@ The maximum size of messages that are accepted (in bytes).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMaxMimeHeaderLength=\fR\fIM\fR\fB[/\fR\fIN\fR\fB]\fR\fR
 .ad
@@ -2085,7 +1934,6 @@ meaning no checks are done.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMaxNOOPCommands=\fR\fIN\fR\fR
 .ad
@@ -2096,7 +1944,6 @@ Overrides the default of 20 for the number of useless commands.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMaxQueueChildren=\fR\fIN\fR\fR
 .ad
@@ -2114,7 +1961,6 @@ run later (in round robin order). See \fBMaxRunnersPerQueue\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMaxQueueRunSize\fR\fR
 .ad
@@ -2127,7 +1973,6 @@ reached; job priority is not used. If not set, there is no limit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMaxRunnersPerQueue=\fR\fIN\fR\fR
 .ad
@@ -2144,7 +1989,6 @@ default is \fB1\fR when not set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMeToo (M)\fR\fR
 .ad
@@ -2155,7 +1999,6 @@ Sends to me too, even if I am in an alias expansion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMaxRecipientsPerMessage\fR\fR
 .ad
@@ -2168,7 +2011,6 @@ next delivery attempt.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMinFreeBlocks (b\fR\fIN/M\fR\fB)\fR\fR
 .ad
@@ -2184,7 +2026,6 @@ otherwise unused.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMinQueueAge\fR\fR
 .ad
@@ -2197,7 +2038,6 @@ without trying all jobs in each run. The default value is 0.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMustQuoteChars\fR\fR
 .ad
@@ -2209,7 +2049,6 @@ are quoted automatically.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNiceQueueRun\fR\fR
 .ad
@@ -2220,7 +2059,6 @@ Specifies the priority of queue runners. See \fBnice\fR(1).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNoRecipientAction\fR\fR
 .ad
@@ -2230,7 +2068,6 @@ Sets action if there are no legal recipient files in the message. The legal
 values are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadd-apparently-to\fR\fR
 .ad
@@ -2242,7 +2079,6 @@ expose blind recipients).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadd-bcc\fR\fR
 .ad
@@ -2253,7 +2089,6 @@ Adds an empty \fBBcc:\fR header.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadd-to\fR\fR
 .ad
@@ -2265,7 +2100,6 @@ recipients).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadd-to-undisclosed\fR\fR
 .ad
@@ -2276,7 +2110,6 @@ Adds a \fBTo: undisclosed-recipients:\fR header.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnone\fR\fR
 .ad
@@ -2289,7 +2122,6 @@ Does nothing, that is, leaves the message as it is.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBOldStyleHeaders (o)\fR\fR
 .ad
@@ -2304,7 +2136,6 @@ output with commas between the names.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBOperatorChars or $o\fR\fR
 .ad
@@ -2316,7 +2147,6 @@ an address into tokens.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPidFile\fR\fR
 .ad
@@ -2329,7 +2159,6 @@ opened, and unlinked when \fBsendmail\fR exits.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPostmasterCopy (P\fR\fIpostmaster\fR\fB)\fR\fR
 .ad
@@ -2344,7 +2173,6 @@ systems vendors.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPrivacyOptions (p\fR\fIopt,opt,...\fR\fB)\fR\fR
 .ad
@@ -2370,7 +2198,6 @@ system, such as using an non-standard queue directory.
 The options can be selected from:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBauthwarnings\fR\fR
 .ad
@@ -2381,7 +2208,6 @@ Puts \fBX-Authentication-Warning:\fR headers in messages.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgoaway\fR\fR
 .ad
@@ -2392,7 +2218,6 @@ Disallows essentially all SMTP status queries.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBneedexpnhelo\fR\fR
 .ad
@@ -2403,7 +2228,6 @@ Insists on \fBHELO\fR or \fBEHLO\fR command before \fBEXPN\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBneedmailhelo\fR\fR
 .ad
@@ -2414,7 +2238,6 @@ Insists on \fBHELO\fR or \fBEHLO\fR command before \fBMAIL\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBneedvrfyhelo\fR\fR
 .ad
@@ -2425,7 +2248,6 @@ Insists on \fBHELO\fR or \fBEHLO\fR command before \fBVRFY\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnoactualrecipient\fR\fR
 .ad
@@ -2437,7 +2259,6 @@ to which an address is mapped.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnoetrn\fR\fR
 .ad
@@ -2448,7 +2269,6 @@ Disallows \fBETRN\fR entirely.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnoexpn\fR\fR
 .ad
@@ -2459,7 +2279,6 @@ Disallows \fBEXPN\fR entirely.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnoreceipts\fR\fR
 .ad
@@ -2470,7 +2289,6 @@ Prevents return receipts.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnobodyreturn\fR\fR
 .ad
@@ -2481,7 +2299,6 @@ Does not return the body of a message with DSNs.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnovrfy\fR\fR
 .ad
@@ -2492,7 +2309,6 @@ Disallows \fBVRFY\fR entirely.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpublic\fR\fR
 .ad
@@ -2503,7 +2319,6 @@ Allows open access.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBre\fR\fB\fR\fBstrictexpand\fR\fR
 .ad
@@ -2514,7 +2329,6 @@ Restricts \fB-bv\fR and \fB-v\fR command line flags.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrestrictmailq\fR\fR
 .ad
@@ -2525,7 +2339,6 @@ Restricts \fBmailq\fR command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrestrictqrun\fR\fR
 .ad
@@ -2538,7 +2351,6 @@ Restricts \fB-q\fR command line flag.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBProcessTitlePrefix \fIstring\fR\fR\fR
 .ad
@@ -2550,7 +2362,6 @@ Prefixes the process title shown on "\fB/usr/ucb/ps auxww\fR" listings with
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBQueueDirectory (Q\fR\fIdir\fR\fB)\fR\fR
 .ad
@@ -2561,7 +2372,6 @@ Uses the named \fIdir\fR as the queue directory.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBQueueFactor (q\fR\fIfactor\fR\fB)\fR\fR
 .ad
@@ -2575,7 +2385,6 @@ determine the maximum message priority to be sent. Defaults to \fB600000\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBQueueFileMode=\fR\fImode\fR\fR
 .ad
@@ -2588,7 +2397,6 @@ it uses \fB0644\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBQueueLA (x\fR\fILA\fR\fB)\fR\fR
 .ad
@@ -2601,7 +2409,6 @@ online when \fBsendmail\fR starts.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBQueueSortOrder=\fR\fIalgorithm\fR\fR
 .ad
@@ -2628,7 +2435,6 @@ parts of the queue at the same time. Priority ordering is the default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBQueueTimeout (T\fR\fIrtime\fR\fB/\fR\fIwtime\fR\fB)\fR\fR
 .ad
@@ -2642,7 +2448,6 @@ is sent. If it is missing or \fB0\fR, then no warning messages are sent.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRandFile\fR\fR
 .ad
@@ -2655,7 +2460,6 @@ socket if EGD is used (use prefix \fBegd:\fR). Note that Solaris supports
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRecipientFactor (y\fR\fIfact\fR\fB)\fR\fR
 .ad
@@ -2668,7 +2472,6 @@ with large numbers of recipients. Defaults to \fB30000\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRefuseLA (X\fR\fILA\fR\fB)\fR\fR
 .ad
@@ -2681,7 +2484,6 @@ connections. Defaults to 12 times the number of processors online when
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRejectLogInterval\fR\fR
 .ad
@@ -2692,7 +2494,6 @@ Log interval when refusing connections for this long (default: 3h).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBResolverOptions (I)\fR\fR
 .ad
@@ -2703,7 +2504,6 @@ Tunes DNS lookups.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRetryFactor (Z\fR\fIfact\fR\fB)\fR\fR
 .ad
@@ -2717,7 +2517,6 @@ are down are all too often down for a long time. Defaults to \fB90000\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRrtImpliesDsn\fR\fR
 .ad
@@ -2730,7 +2529,6 @@ to the address given in the header.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRunAsUser\fR\fR
 .ad
@@ -2742,7 +2540,6 @@ firewalls where users do not have accounts.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSafeFileEnvironment\fR\fR
 .ad
@@ -2754,7 +2551,6 @@ files.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSaveFromLine (f)\fR\fR
 .ad
@@ -2766,7 +2562,6 @@ assumed redundant and discarded.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSendMimeErrors (j)\fR\fR
 .ad
@@ -2780,7 +2575,6 @@ processing as described in RFC 1891.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBServerCertFile\fR\fR
 .ad
@@ -2792,7 +2586,6 @@ File containing the cert of the server, that is, this cert is used when
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBServerKeyFile\fR\fR
 .ad
@@ -2803,7 +2596,6 @@ File containing the private key belonging to the server cert.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBServiceSwitchFile\fR\fR
 .ad
@@ -2815,7 +2607,6 @@ defined in the Solaris operating environment this option is ignored.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSevenBitInput (7)\fR\fR
 .ad
@@ -2827,7 +2618,6 @@ be necessary.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSharedMemoryKey\fR\fR
 .ad
@@ -2843,7 +2633,6 @@ instead of each individual process gathering the data each time it is required.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSharedMemoryKeyFile=\fR\fIfile\fR\fR
 .ad
@@ -2855,7 +2644,6 @@ shared memory key will be stored in the specified file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSingleLineFromHeader\fR\fR
 .ad
@@ -2867,7 +2655,6 @@ line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSingleThreadDelivery\fR\fR
 .ad
@@ -2879,7 +2666,6 @@ single thread deliveries to other hosts.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSmtpGreetingMessage or $e\fR\fR
 .ad
@@ -2890,7 +2676,6 @@ Specifies the initial SMTP greeting message.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSoftBounce\fR\fR
 .ad
@@ -2903,7 +2688,6 @@ erroneous bouncing of mail.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBStatusFile (S\fR\fIfile\fR\fB)\fR\fR
 .ad
@@ -2916,7 +2700,6 @@ enable \fBmailstats\fR(1).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSuperSafe (s)\fR\fR
 .ad
@@ -2938,7 +2721,6 @@ SMTP server; in all other situations it acts the same as True.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTempFileMode (F\fR\fImode\fR\fB)\fR\fR
 .ad
@@ -2949,7 +2731,6 @@ Specifies the file mode for queue files.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTimeout (r\fR\fItimeouts\fR\fB)\fR\fR
 .ad
@@ -2962,7 +2743,6 @@ the longer values. The recognized timeouts and their default values, and their
 minimum values specified in RFC 1123 section 5.3.2 are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaconnect\fR\fR
 .ad
@@ -2973,7 +2753,6 @@ all connections for a single delivery attempt [0, unspecified]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcommand\fR\fR
 .ad
@@ -2984,7 +2763,6 @@ command read [1h, 5m]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconnect\fR\fR
 .ad
@@ -2995,7 +2773,6 @@ initial connect [0, unspecified]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcontrol\fR\fR
 .ad
@@ -3006,7 +2783,6 @@ complete control socket transaction [2m, none]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdatablock\fR\fR
 .ad
@@ -3017,7 +2793,6 @@ data block read [1h, 3m]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdatafinal\fR\fR
 .ad
@@ -3028,7 +2803,6 @@ reply to final \fB\&.\fR in data [1h, 10m]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdatainit\fR\fR
 .ad
@@ -3039,7 +2813,6 @@ reply to \fBDATA\fR command [5m, 2m]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfileopen\fR\fR
 .ad
@@ -3050,7 +2823,6 @@ file open [60sec, none]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhelo\fR\fR
 .ad
@@ -3061,7 +2833,6 @@ reply to \fBHELO\fR or \fBEHLO\fR command [5m, none]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhoststatus\fR\fR
 .ad
@@ -3072,7 +2843,6 @@ host retry [30m, unspecified]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBiconnect\fR\fR
 .ad
@@ -3083,7 +2853,6 @@ first attempt to connect to a host [0, unspecified]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBident\fR\fR
 .ad
@@ -3094,7 +2863,6 @@ first attempt to connect to a host [0, unspecified]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinitial\fR\fR
 .ad
@@ -3105,7 +2873,6 @@ wait for initial greeting message [5m, 5m]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlhlo\fR\fR
 .ad
@@ -3116,7 +2883,6 @@ wait for reply to an LMTP LHLO command [2m, unspecified]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmail\fR\fR
 .ad
@@ -3127,7 +2893,6 @@ reply to \fBMAIL\fR command [10m, 5m]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmisc\fR\fR
 .ad
@@ -3138,7 +2903,6 @@ reply to \fBNOOP\fR and \fBVERB\fR commands [2m, none]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBqueuereturn\fR\fR
 .ad
@@ -3149,7 +2913,6 @@ undeliverable message returned [5d]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBqueuewarn\fR\fR
 .ad
@@ -3160,7 +2923,6 @@ deferred warning [4h]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBquit\fR\fR
 .ad
@@ -3171,7 +2933,6 @@ reply to \fBQUIT\fR command [2m, none]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrcpt\fR\fR
 .ad
@@ -3182,7 +2943,6 @@ reply to \fBRCPT\fR command [1h, 5m]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBresolver.retrans\fR\fR
 .ad
@@ -3194,7 +2954,6 @@ Resolver's retransmission time interval (in seconds) [varies]. Sets both
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBresolver.retrans.first\fR\fR
 .ad
@@ -3206,7 +2965,6 @@ deliver a message [varies].
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBresolver.retrans.normal\fR\fR
 .ad
@@ -3218,7 +2976,6 @@ the first delivery attempt [varies].
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBresolver.retry\fR\fR
 .ad
@@ -3230,7 +2987,6 @@ Number of times to retransmit a resolver query [varies]. Sets both
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBresolver.retry.first\fR\fR
 .ad
@@ -3242,7 +2998,6 @@ a message [varies].
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBresolver.retry.normal\fR\fR
 .ad
@@ -3254,7 +3009,6 @@ first delivery attempt [varies].
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrset\fR\fR
 .ad
@@ -3265,7 +3019,6 @@ reply to \fBRSET\fR command [5m, none]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstarttls\fR\fR
 .ad
@@ -3278,7 +3031,6 @@ response to an \fBSMTP STARTTLS\fR command [1h]
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTimeZoneSpec (t\fR\fItzinfo\fR\fB)\fR\fR
 .ad
@@ -3292,7 +3044,6 @@ used, and if set and non-null, the \fBTZ\fR variable is set to this value.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTLSSrvOptions\fR\fR
 .ad
@@ -3304,7 +3055,6 @@ the server does not ask for a certificate.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTrustedUser\fR\fR
 .ad
@@ -3318,7 +3068,6 @@ automatically owned by this user.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTryNullMXList (w)\fR\fR
 .ad
@@ -3337,7 +3086,6 @@ deprecated.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBUnixFromLine or $l\fR\fR
 .ad
@@ -3348,7 +3096,6 @@ The "From " line used when sending to files or programs.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBUnsafeGroupWrites\fR\fR
 .ad
@@ -3360,7 +3107,6 @@ that is, programs and files cannot be directly referenced from such files.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBUseErrorsTo (l)\fR\fR
 .ad
@@ -3374,7 +3120,6 @@ and deprecated.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBUseMSP\fR\fR
 .ad
@@ -3386,7 +3131,6 @@ the group is the same as that of a set-group-id \fBsendmail\fR binary.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBUserDatabaseSpec (U)\fR\fR
 .ad
@@ -3397,7 +3141,6 @@ Defines the name and location of the file containing User Database information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBVerbose (v)\fR\fR
 .ad
@@ -3412,7 +3155,6 @@ configuration file; it is intended for command line use only.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBXscriptFileBufferSize\fR\fR
 .ad
@@ -3437,7 +3179,6 @@ the contents of the mail queue.
 .SH OPERANDS
 .sp
 .ne 2
-.mk
 .na
 \fB\fIaddress\fR\fR
 .ad
@@ -3458,7 +3199,6 @@ when encountering files greater than or equal to 2 Gbyte ( 2^31 bytes).
 defined in \fB/usr/include/sysexits.h\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEX_OK\fR\fR
 .ad
@@ -3469,7 +3209,6 @@ Successful completion on all addresses.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEX_NOUSER\fR\fR
 .ad
@@ -3480,7 +3219,6 @@ User name not recognized.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEX_UNAVAILABLE\fR\fR
 .ad
@@ -3491,7 +3229,6 @@ Catchall. Necessary resources were not available.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEX_SYNTAX\fR\fR
 .ad
@@ -3502,7 +3239,6 @@ Syntax error in address.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEX_SOFTWARE\fR\fR
 .ad
@@ -3513,7 +3249,6 @@ Internal software error, including bad arguments.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEX_OSERR\fR\fR
 .ad
@@ -3524,7 +3259,6 @@ Temporary operating system error, such as "cannot fork".
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEX_NOHOST\fR\fR
 .ad
@@ -3535,7 +3269,6 @@ Host name not recognized.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEX_TEMPFAIL\fR\fR
 .ad
@@ -3579,7 +3312,6 @@ on the host \fIserver\fR.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdead.letter\fR\fR
 .ad
@@ -3590,7 +3322,6 @@ Unmailable text
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/sendmail\fR\fR
 .ad
@@ -3602,7 +3333,6 @@ line options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mail/aliases\fR\fR
 .ad
@@ -3613,7 +3343,6 @@ Mail aliases file (ASCII)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mail/aliases.db\fR\fR
 .ad
@@ -3624,7 +3353,6 @@ Database of mail aliases (binary)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mail/aliases.dir\fR\fR
 .ad
@@ -3635,7 +3363,6 @@ Database of mail aliases (binary)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mail/aliases.pag\fR\fR
 .ad
@@ -3646,7 +3373,6 @@ Database of mail aliases (binary)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mail/sendmail.cf\fR\fR
 .ad
@@ -3657,7 +3383,6 @@ Defines environment for \fBsendmail\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mail/submit.cf\fR\fR
 .ad
@@ -3668,7 +3393,6 @@ Defines environment for MSP
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/mail/trusted-users\fR\fR
 .ad
@@ -3684,7 +3408,6 @@ is commented out. See \fBsendmail\fR(4) for instructions on making changes to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/spool/clientmqueue/*\fR\fR
 .ad
@@ -3695,7 +3418,6 @@ Temporary files and queued mail
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/spool/mqueue/*\fR\fR
 .ad
@@ -3706,7 +3428,6 @@ Temporary files and queued mail
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB~/.forward\fR\fR
 .ad
@@ -3717,7 +3438,6 @@ List of recipients for forwarding messages
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/include/libmilter/README\fR\fR
 .ad
diff --git a/usr/src/man/man1m/setuname.1m b/usr/src/man/man1m/setuname.1m
index 8d574496f8..18d8a6a180 100644
--- a/usr/src/man/man1m/setuname.1m
+++ b/usr/src/man/man1m/setuname.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH setuname 1M "9 Jul 2003" "SunOS 5.11" "System Administration Commands"
+.TH SETUNAME 1M "Jul 9, 2003"
 .SH NAME
 setuname \- change machine information
 .SH SYNOPSIS
@@ -33,12 +33,10 @@ message if the name entered is incompatible with the system requirements.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fI node\fR\fR
 .ad
 .RS 11n
-.rt  
 Changes the node name. \fInode\fR specifies the new network node name and can
 consist of alphanumeric characters and the special characters dash, underbar,
 and dollar sign.
@@ -46,12 +44,10 @@ and dollar sign.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fI name\fR\fR
 .ad
 .RS 11n
-.rt  
 Changes the system name. \fIname\fR specifies new system name and can consist
 of alphanumeric characters and the special characters dash, underbar, and
 dollar sign.
@@ -59,12 +55,10 @@ dollar sign.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
 .RS 11n
-.rt  
 Temporary change. No attempt will be made to create a permanent change.
 .RE
 
diff --git a/usr/src/man/man1m/sf880drd.1m b/usr/src/man/man1m/sf880drd.1m
index e5de79131c..f37256e46f 100644
--- a/usr/src/man/man1m/sf880drd.1m
+++ b/usr/src/man/man1m/sf880drd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH sf880drd 1M "13 Aug 2004" "SunOS 5.11" "System Administration Commands"
+.TH SF880DRD 1M "Aug 13, 2004"
 .SH NAME
 sf880drd \- Sun Fire 880 Dynamic Reconfiguration daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fBsf880drd\fR 
+\fBsf880drd\fR
 .fi
 
 .SH DESCRIPTION
@@ -26,7 +26,6 @@ manages various aspects of \fBCPU\fR/memory hotplug.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/platform/SUNW,Sun-Fire-880/lib/sf880drd\fR \fR
 .ad
diff --git a/usr/src/man/man1m/sftp-server.1m b/usr/src/man/man1m/sftp-server.1m
index c0ba05b265..48c4b62c44 100644
--- a/usr/src/man/man1m/sftp-server.1m
+++ b/usr/src/man/man1m/sftp-server.1m
@@ -2,7 +2,7 @@
 .\" To view license terms, attribution, and copyright for OpenSSH, the default path is /var/sadm/pkg/SUNWsshdr/install/copyright. If the Solaris operating environment has been installed anywhere other than the default, modify the given path to access the file at the
 .\" installed location.
 .\" Portions Copyright (c) 2007, Sun Microsystems, Inc. All Rights Reserved.
-.TH sftp-server 1M "24 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH SFTP-SERVER 1M "Oct 24, 2007"
 .SH NAME
 sftp-server \- SFTP server subsystem
 .SH SYNOPSIS
@@ -48,7 +48,6 @@ Valid options are listed below. As stated above, these are to be specified in
 the Subsystem declation of \fBsshd_config\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIlog_facility\fR\fR
 .ad
@@ -63,7 +62,6 @@ Specifies the facility code that is used when logging messages from
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlog_level\fR\fR
 .ad
@@ -84,35 +82,29 @@ client. \fBDEBUG\fR and \fBDEBUG1\fR are equivalent. \fBDEBUG2\fR and
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/ssh/sftp-server\fR\fR
 .ad
 .RS 28n
-.rt  
 Server-side binary.
 .RE
 
@@ -124,13 +116,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/share.1m b/usr/src/man/man1m/share.1m
index 91dc4c0be6..0c3810bc92 100644
--- a/usr/src/man/man1m/share.1m
+++ b/usr/src/man/man1m/share.1m
@@ -4,13 +4,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH share 1M "23 Jan 2007" "SunOS 5.11" "System Administration Commands"
+.TH SHARE 1M "Jan 23, 2007"
 .SH NAME
 share \- make local resource available for mounting by remote systems
 .SH SYNOPSIS
 .LP
 .nf
-\fBshare\fR [\fB-p\fR] [\fB-F\fR \fIFSType\fR] [\fB-o\fR \fIspecific_options\fR] [\fB-d\fR \fIdescription\fR] 
+\fBshare\fR [\fB-p\fR] [\fB-F\fR \fIFSType\fR] [\fB-o\fR \fIspecific_options\fR] [\fB-d\fR \fIdescription\fR]
      [\fIpathname\fR]
 .fi
 
@@ -27,7 +27,6 @@ all shared file systems.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdescription\fR\fR
 .ad
@@ -39,7 +38,6 @@ shared.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fIFSType\fR\fR
 .ad
@@ -50,7 +48,6 @@ Specify the filesystem type.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIspecific_options\fR\fR
 .ad
@@ -61,7 +58,6 @@ The \fIspecific_options\fR are used to control access of the shared resource.
 following:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrw\fR\fR
 .ad
@@ -73,7 +69,6 @@ behavior.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrw=\fR\fIclient\fR[\fI:client\fR]...\fR
 .ad
@@ -85,7 +80,6 @@ systems can access \fIpathname\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBro\fR\fR
 .ad
@@ -96,7 +90,6 @@ systems can access \fIpathname\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBro=\fR\fIclient\fR[\fI:client\fR]...\fR
 .ad
@@ -112,7 +105,6 @@ with colons. See EXAMPLES.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
@@ -155,7 +147,6 @@ share \fB-F\fR nfs \fB-o\fR ro=\fInetgroup_name\fR,rw=\fIhost1\fR:\fIhost2\fR:\f
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dfs/dfstab\fR\fR
 .ad
@@ -168,7 +159,6 @@ above, as an alternative to editing this file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dfs/fstypes\fR\fR
 .ad
@@ -179,7 +169,6 @@ List of file system types; NFS is the default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dfs/sharetab\fR\fR
 .ad
diff --git a/usr/src/man/man1m/share_nfs.1m b/usr/src/man/man1m/share_nfs.1m
index e0df9e068e..88e4f3c840 100644
--- a/usr/src/man/man1m/share_nfs.1m
+++ b/usr/src/man/man1m/share_nfs.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH share_nfs 1M "6 May 2009" "SunOS 5.11" "System Administration Commands"
+.TH SHARE_NFS 1M "May 6, 2009"
 .SH NAME
 share_nfs \- make local NFS file systems available for mounting by remote
 systems
@@ -30,7 +30,6 @@ through other distributed file system packages.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdescription\fR\fR
 .ad
@@ -41,7 +40,6 @@ Provide a comment that describes the file system to be shared.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-F\fR \fBnfs\fR\fR
 .ad
@@ -52,7 +50,6 @@ Share \fBNFS\fR file system type.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIspecific_options\fR\fR
 .ad
@@ -65,7 +62,6 @@ read-write to all clients. \fIspecific_options\fR can be any combination of the
 following:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaclok\fR\fR
 .ad
@@ -80,7 +76,6 @@ minimal access is given to all clients.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBanon=\fR\fIuid\fR\fR
 .ad
@@ -93,7 +88,6 @@ unknown users are given the effective user \fBID\fR \fBUID_NOBODY\fR. If
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcharset\fR=\fIaccess_list\fR\fR
 .ad
@@ -111,7 +105,6 @@ converted to UTF-8 for the server.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBindex=\fR\fBfile\fR\fR
 .ad
@@ -123,7 +116,6 @@ when the directory is referenced by an \fBNFS URL\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlog=tag\fR\fR
 .ad
@@ -139,7 +131,6 @@ Version 3 requests.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnone=\fR\fIaccess_list\fR\fR
 .ad
@@ -152,7 +143,6 @@ is when the access list is an asterisk (\fB*\fR), in which case \fBro\fR or
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnosub\fR\fR
 .ad
@@ -175,7 +165,6 @@ only applies to NFS Version 2 and Version 3 requests.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnosuid\fR\fR
 .ad
@@ -189,7 +178,6 @@ bits.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpublic\fR\fR
 .ad
@@ -205,7 +193,6 @@ option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBro\fR\fR
 .ad
@@ -216,7 +203,6 @@ Sharing is read-only to all clients.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBro=\fR\fIaccess_list\fR\fR
 .ad
@@ -228,7 +214,6 @@ Sharing is read-only to the clients listed in \fIaccess_list\fR; overrides the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBroot=\fR\fIaccess_list\fR\fR
 .ad
@@ -243,7 +228,6 @@ authentication ( \fBAUTH_SYS\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBroot_mapping=\fIuid\fR\fR\fR
 .ad
@@ -255,7 +239,6 @@ user id.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrw\fR\fR
 .ad
@@ -266,7 +249,6 @@ Sharing is read-write to all clients.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrw=\fR\fIaccess_list\fR\fR
 .ad
@@ -278,7 +260,6 @@ Sharing is read-write to the clients listed in \fIaccess_list\fR; overrides the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsec=\fR\fImode\fR[\fB:\fR\fImode\fR].\|.\|.\fR
 .ad
@@ -300,7 +281,6 @@ so that more \fBwindow=,\fR \fBrw,\fR \fBro,\fR \fBrw=,\fR \fBro=\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsec=\fR\fInone\fR\fR
 .ad
@@ -315,7 +295,6 @@ description of how unauthenticated requests are handled.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsecure\fR\fR
 .ad
@@ -326,7 +305,6 @@ This option has been deprecated in favor of the \fBsec=\fR\fIdh\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwindow=\fR\fIvalue\fR\fR
 .ad
@@ -348,7 +326,6 @@ The \fIaccess_list\fR argument is a colon-separated list whose components may
 be any number of the following:
 .sp
 .ne 2
-.mk
 .na
 \fBhostname\fR
 .ad
@@ -361,7 +338,6 @@ fully qualified \fBDNS\fR or \fBLDAP\fR name.
 
 .sp
 .ne 2
-.mk
 .na
 \fBnetgroup\fR
 .ad
@@ -375,7 +351,6 @@ hostname in a netgroup must be represented as a fully qualified \fBDNS\fR or
 
 .sp
 .ne 2
-.mk
 .na
 \fBdomain name suffix\fR
 .ad
@@ -400,7 +375,7 @@ and
 .sp
 .in +2
 .nf
-DNS or LDAP   172.16.45.9 --> 
+DNS or LDAP   172.16.45.9 -->
      "myhost.mydomain.mycompany.com"
 .fi
 .in -2
@@ -422,7 +397,6 @@ and \fBLDAP\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBnetwork\fR
 .ad
@@ -504,7 +478,6 @@ grants access to \fBterra\fR.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpathname\fR\fR
 .ad
@@ -545,7 +518,6 @@ line does not start the \fBnfslogd\fR(1M).
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -556,7 +528,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
@@ -568,7 +539,6 @@ An error occurred.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dfs/fstypes\fR\fR
 .ad
@@ -579,7 +549,6 @@ list of system types, \fBNFS\fR by default
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dfs/sharetab\fR\fR
 .ad
@@ -590,7 +559,6 @@ system record of shared file systems
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/nfs/nfslogtab\fR\fR
 .ad
@@ -601,7 +569,6 @@ system record of logged file systems
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/nfs/nfslog.conf\fR\fR
 .ad
diff --git a/usr/src/man/man1m/shareall.1m b/usr/src/man/man1m/shareall.1m
index 91996befe3..afffca8647 100644
--- a/usr/src/man/man1m/shareall.1m
+++ b/usr/src/man/man1m/shareall.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH shareall 1M "6 Nov 2000" "SunOS 5.11" "System Administration Commands"
+.TH SHAREALL 1M "Nov 6, 2000"
 .SH NAME
 shareall, unshareall \- share, unshare multiple resources
 .SH SYNOPSIS
@@ -36,12 +36,10 @@ flag, it unshares resources for all distributed file system types.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fI FSType\fR\fR
 .ad
 .RS 13n
-.rt  
 Specify file system type. Defaults to the first entry in
 \fB/etc/dfs/fstypes\fR.
 .RE
@@ -49,12 +47,10 @@ Specify file system type. Defaults to the first entry in
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dfs/dfstab\fR\fR
 .ad
 .RS 19n
-.rt  
 
 .RE
 
diff --git a/usr/src/man/man1m/sharectl.1m b/usr/src/man/man1m/sharectl.1m
index aa060ca959..34dc693a5e 100644
--- a/usr/src/man/man1m/sharectl.1m
+++ b/usr/src/man/man1m/sharectl.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH sharectl 1M "16 Mar 2009" "SunOS 5.11" "System Administration Commands"
+.TH SHARECTL 1M "Mar 16, 2009"
 .SH NAME
 sharectl \- configure and manage file sharing service
 .SH SYNOPSIS
@@ -48,7 +48,6 @@ management facility. See \fBsmb\fR(4).
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -59,7 +58,6 @@ Displays usage message.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIproperty\fR[=\fIvalue\fR]\fR
 .ad
@@ -83,7 +81,6 @@ Specifies a property. See "Subcommands," below.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBget\fR [\fB-p\fR\ \fIproperty\fR] \fIprotocol\fR\fR
 .ad
@@ -97,7 +94,6 @@ properties correspond to entries in the \fB/etc/default/nfs\fR file. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBset\fR [\fB-p\fR\ \fIproperty\fR=\fIvalue\fR]... \fIprotocol\fR\fR
 .ad
@@ -108,7 +104,6 @@ Set properties for the specified file sharing protocol.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstatus\fR [\fIprotocol\fR]\fR
 .ad
@@ -244,35 +239,29 @@ timeout=25
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fInon-zero\fR\fR
 .ad
 .RS 12n
-.rt  
 Command failed.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/include/libshare.h\fR\fR
 .ad
 .RS 27n
-.rt  
 Error codes used for exit status.
 .RE
 
@@ -284,13 +273,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/sharemgr.1m b/usr/src/man/man1m/sharemgr.1m
index 6dde83860d..5b736de81c 100644
--- a/usr/src/man/man1m/sharemgr.1m
+++ b/usr/src/man/man1m/sharemgr.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH sharemgr 1M "21 Sep 2009" "SunOS 5.11" "System Administration Commands"
+.TH SHAREMGR 1M "Sep 21, 2009"
 .SH NAME
 sharemgr \- configure and manage file sharing
 .SH SYNOPSIS
@@ -141,7 +141,6 @@ take the form:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcreate\fR \fB[-nvh] [-P \fIproto\fR [-p \fIproperty\fR=\fIvalue\fR]]
 \fIgroup\fR\fR\fR
@@ -176,7 +175,6 @@ protocols will be enabled on the group.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelete\fR \fB[-nvh] [-P \fIproto\fR] [-f] \fIgroup\fR\fR\fR
 .ad
@@ -215,7 +213,6 @@ Note the use of the force (\fB-f\fR) option, above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist\fR \fB[-vh] [-P \fIproto\fR]\fR\fR
 .ad
@@ -242,7 +239,6 @@ rdonlygrp  disabled   nfs
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshow\fR \fB[-pvxh] [-P \fIproto\fR] [\fIgroup\fR...]\fR\fR
 .ad
@@ -309,7 +305,6 @@ zfs        nfs=()
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBset\fR \fB[-nvh] -P \fIproto\fR [-S \fIoptionset\fR] [-p
 \fIproperty\fR=\fIvalue\fR]* [-s \fIshare path\fR] \fIgroup\fR\fR\fR
@@ -358,7 +353,6 @@ reshared with the new property value(s).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunset\fR \fB[-nvh] -P proto [-S \fIoptionset\fR] [-p \fIproperty\fR]* [-s
 \fIsharepath\fR ] \fIgroup\fR\fR\fR
@@ -390,7 +384,6 @@ reshared with the new property value(s).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadd-share\fR \fB[-nth] [-r \fIresource-name\fR] [-d "\fIdescription
 text\fR"] -s \fIsharepath\fR \fIgroup\fR\fR\fR
@@ -444,7 +437,6 @@ a resource name are included.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmove-share\fR \fB[-nvh] -s \fIsharepath\fR \fIdestination-group\fR\fR\fR
 .ad
@@ -471,7 +463,6 @@ and then reshares the directory with the properties associated with
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremove-share\fR \fB[-fnvh] -s \fIsharepath\fR \fIgroup\fR\fR\fR
 .ad
@@ -488,7 +479,6 @@ along with the parent shares.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBset-share\fR \fB[-nvh] [-r \fIresource\fR] [-d "\fIdescription text\fR"]
 -s \fIsharepath\fR \fIgroup\fR\fR\fR
@@ -510,7 +500,6 @@ subcommand is:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBenable\fR \fB[-nvh] [\fIgroup\fR... | -a]\fR\fR
 .ad
@@ -526,7 +515,6 @@ currently online.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisable\fR \fB[-nvh] [\fIgroup\fR... | -a]\fR\fR
 .ad
@@ -542,7 +530,6 @@ shares to be started at boot time.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstart\fR \fB[-vh] [-P \fIproto\fR] [\fIgroup\fR... | -a]\fR\fR
 .ad
@@ -581,7 +568,6 @@ The command:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstop\fR \fB[-vh] [-P \fIproto\fR] [\fIgroup\fR... | -a]\fR\fR
 .ad
@@ -617,7 +603,6 @@ enabled. The command:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshare\fR \fB[-F \fIfstype\fR] [-p] [-o \fIoptionlist\fR] [-d
 \fIdescription\fR] [\fIpathname\fR [\fIresourcename\fR]]\fR\fR
@@ -632,7 +617,6 @@ to be persistent.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunshare\fR \fB[-F \fIfstype\fR] [-p] [-o \fIoptionlist\fR]
 \fIsharepath\fR\fR\fR
@@ -680,7 +664,6 @@ descriptions of the NFS properties.
 The general properties supported for NFS are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBabe=\fR\fIboolean\fR\fR
 .ad
@@ -693,7 +676,6 @@ returned to the client. When set to \fBfalse\fR or not defined, ABE filtering
 will not be performed on  this share. This property is not defined by default.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisabled\fR\fR
 .ad
@@ -704,7 +686,6 @@ Disable ABE for this share.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBenabled\fR\fR
 .ad
@@ -717,7 +698,6 @@ Enable ABE for this share.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaclok=\fIboolean\fR\fR\fR
 .ad
@@ -732,7 +712,6 @@ given to all clients.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBad-container\fR\fR
 .ad
@@ -787,7 +766,6 @@ includes the following object classes:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBanon=\fIuid\fR\fR\fR
 .ad
@@ -800,7 +778,6 @@ users are given the effective user ID \fBUID_NOBODY\fR. If uid is set to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcatia=\fIboolean\fR\fR\fR
 .ad
@@ -817,7 +794,7 @@ substitution is applied to file names.
 .sp
 .in +2
 .nf
-CATIA    CATIA 
+CATIA    CATIA
 V4 UNIX  V5 Windows
   "      \e250   0x00a8  Dieresis
   *      \e244   0x00a4  Currency Sign
@@ -836,7 +813,6 @@ V4 UNIX  V5 Windows
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcksum=\fIcksumlist\fR\fR\fR
 .ad
@@ -848,7 +824,6 @@ specifies the checksum algorithms that should be used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcsc=\fR\fIvalue\fR\fR
 .ad
@@ -892,7 +867,6 @@ clients are permitted to work from their local cache even while offline.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBguestok=\fR\fIboolean\fR\fR
 .ad
@@ -921,7 +895,6 @@ Example name-based rule:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBindex=\fIfile\fR\fR\fR
 .ad
@@ -933,7 +906,6 @@ when the directory is referenced by an NFS URL.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlog=\fItag\fR\fR\fR
 .ad
@@ -948,7 +920,6 @@ NFS server logging is available only for NFS Version 2 and Version 3 requests.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnosub=\fIboolean\fR\fR\fR
 .ad
@@ -971,7 +942,6 @@ only to NFS Version 2 and Version 3 requests.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnosuid=\fIboolean\fR\fR\fR
 .ad
@@ -985,7 +955,6 @@ the server file system to silently ignore any attempt to enable the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpublic=\fIboolean\fR\fR\fR
 .ad
@@ -1005,7 +974,6 @@ security modes are documented in \fBnfssec\fR(5). The properties supported for
 these optionsets are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcharset\fR=\fIaccess-list\fR\fR
 .ad
@@ -1023,7 +991,6 @@ converted to UTF-8 for the server.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBro=\fIaccess-list\fR\fR\fR
 .ad
@@ -1036,7 +1003,6 @@ Sharing is read-only to the clients listed in \fIaccess-list\fR; overrides the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrw=\fIaccess-list\fR\fR\fR
 .ad
@@ -1049,7 +1015,6 @@ Sharing is read-write to the clients listed in \fIaccess-list\fR; overrides the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnone=\fIaccess-list\fR\fR\fR
 .ad
@@ -1062,7 +1027,6 @@ is when the access list is an asterisk (\fB*\fR), in which case \fBro\fR or
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBroot=\fIaccess-list\fR\fR\fR
 .ad
@@ -1077,7 +1041,6 @@ authentication (\fBAUTH_SYS\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBroot_mapping=\fIuid\fR\fR\fR
 .ad
@@ -1089,7 +1052,6 @@ user id.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwindow=\fIvalue\fR\fR\fR
 .ad
@@ -1108,7 +1070,6 @@ seconds (8.3 hours). This property is ignored for security modes other than
 The general properties supported for SMB are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBro=\fIaccess-list\fR\fR\fR
 .ad
@@ -1121,7 +1082,6 @@ Sharing is read-only to the clients listed in \fIaccess-list\fR; overrides the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrw=\fIaccess-list\fR\fR\fR
 .ad
@@ -1134,7 +1094,6 @@ Sharing is read-write to the clients listed in \fIaccess-list\fR; overrides the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnone=\fIaccess-list\fR\fR\fR
 .ad
@@ -1153,7 +1112,6 @@ hosts or a colon-separated list whose components can be any number of the
 following:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIhostname\fR\fR
 .ad
@@ -1166,7 +1124,6 @@ fully qualified DNS or LDAP name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fInetgroup\fR\fR
 .ad
@@ -1180,7 +1137,6 @@ name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdomainname\fR.\fIsuffix\fR\fR
 .ad
@@ -1196,7 +1152,6 @@ an IP address to a hostname, they do not return domain information. For
 example, for the IP address 172.16.45.9:
 .sp
 .ne 2
-.mk
 .na
 \fBNIS or NIS+\fR
 .ad
@@ -1207,7 +1162,6 @@ Returns: \fBmyhost\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fBDNS or LDAP\fR
 .ad
@@ -1241,7 +1195,6 @@ LDAP.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fInetwork\fR\fR
 .ad
@@ -1310,46 +1263,38 @@ rw=engineering:-terra
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 18n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB98\fR\fR
 .ad
 .RS 18n
-.rt  
 Service is offline and cannot be enabled (start only).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIother non-zero\fR\fR
 .ad
 .RS 18n
-.rt  
 Command failed.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/include/libshare.h\fR\fR
 .ad
 .RS 27n
-.rt  
 Error codes used for exit status.
 .RE
 
@@ -1361,13 +1306,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/showmount.1m b/usr/src/man/man1m/showmount.1m
index 00bdfe165e..4b7ba125f4 100644
--- a/usr/src/man/man1m/showmount.1m
+++ b/usr/src/man/man1m/showmount.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH showmount 1M "26 Oct 2004" "SunOS 5.11" "System Administration Commands"
+.TH SHOWMOUNT 1M "Oct 26, 2004"
 .SH NAME
 showmount \- show remote mounts
 .SH SYNOPSIS
@@ -26,12 +26,10 @@ clients.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 Print all remote mounts in the format:
 .sp
 \fBhostname\fR\fB : directory\fR
@@ -42,35 +40,29 @@ of the file system that has been mounted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 6n
-.rt  
 List directories that have been remotely mounted by clients.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
 .RS 6n
-.rt  
 Print the list of shared file systems.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/rmtab\fR\fR
 .ad
 .RS 14n
-.rt  
 
 .RE
 
diff --git a/usr/src/man/man1m/shutdown.1m b/usr/src/man/man1m/shutdown.1m
index eeba070dfa..d44ab4aa84 100644
--- a/usr/src/man/man1m/shutdown.1m
+++ b/usr/src/man/man1m/shutdown.1m
@@ -4,13 +4,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH shutdown 1M "9 May 2001" "SunOS 5.11" "System Administration Commands"
+.TH SHUTDOWN 1M "May 9, 2001"
 .SH NAME
 shutdown \- shut down system, change system state
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/shutdown\fR [\fB-y\fR] [\fB-g\fR \fIgrace-period\fR] [\fB-i\fR \fIinit-state\fR] 
+\fB/usr/sbin/shutdown\fR [\fB-y\fR] [\fB-g\fR \fIgrace-period\fR] [\fB-i\fR \fIinit-state\fR]
      [\fImessage\fR]
 .fi
 
@@ -42,23 +42,19 @@ are 7200, 3600, 1800, 1200, 600, 300, 120, 60, and 30 seconds remaining before
 System state definitions are:
 .sp
 .ne 2
-.mk
 .na
 \fBstate 0\fR
 .ad
 .RS 14n
-.rt  
 Stop the operating system.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBstate 1\fR
 .ad
 .RS 14n
-.rt  
 State 1 is referred to as the administrative state. In state 1 file systems
 required for multi-user operations are mounted, and logins requiring access to
 multi-user file systems can be used. When the system comes up from firmware
@@ -69,12 +65,10 @@ transitioning from multi-user state to state 1.
 
 .sp
 .ne 2
-.mk
 .na
 \fBstate s, S\fR
 .ad
 .RS 14n
-.rt  
 State s (or S) is referred to as the single-user state. All user processes are
 stopped on transitions to this state. In the single-user state, file systems
 required for multi-user logins are unmounted and the system can only be
@@ -84,12 +78,10 @@ systems cannot be used.
 
 .sp
 .ne 2
-.mk
 .na
 \fBstate 5\fR
 .ad
 .RS 14n
-.rt  
 Shut the machine down so that it is safe to remove the power. Have the machine
 remove power, if possible. The \fBrc0\fR procedure is called to perform this
 task.
@@ -97,12 +89,10 @@ task.
 
 .sp
 .ne 2
-.mk
 .na
 \fBstate 6\fR
 .ad
 .RS 14n
-.rt  
 Stop the operating system and reboot to the state defined by the
 \fBinitdefault\fR entry in \fB/etc/inittab\fR. The \fBrc6\fR procedure is
 called to perform this task.
@@ -111,36 +101,30 @@ called to perform this task.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-y\fR\fR
 .ad
 .RS 19n
-.rt  
 Pre-answer the confirmation question so the command can be run without user
 intervention.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR\fI grace-period\fR\fR
 .ad
 .RS 19n
-.rt  
 Allow the super user to change the number of seconds from the 60-second
 default.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fI init-state\fR\fR
 .ad
 .RS 19n
-.rt  
 If there are warnings, \fIinit-state\fR specifies the state \fBinit\fR is to be
 in. By default, system state `\fBs\fR' is used.
 .RE
@@ -177,12 +161,10 @@ Do you want to continue? (y or n):
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inittab\fR\fR
 .ad
 .RS 16n
-.rt  
 controls process dispatching by \fBinit\fR
 .RE
 
diff --git a/usr/src/man/man1m/slpd.1m b/usr/src/man/man1m/slpd.1m
index 3c6bd66f9f..a17acdd96d 100644
--- a/usr/src/man/man1m/slpd.1m
+++ b/usr/src/man/man1m/slpd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH slpd 1M "23 Aug 2004" "SunOS 5.11" "System Administration Commands"
+.TH SLPD 1M "Aug 23, 2004"
 .SH NAME
 slpd \- Service Location Protocol Daemon
 .SH SYNOPSIS
@@ -24,7 +24,6 @@ the discovery and selection of network services.
 \fBslpd\fR provides the following framework services:
 .sp
 .ne 2
-.mk
 .na
 \fBDirectory Agent\fR
 .ad
@@ -39,7 +38,6 @@ be maintained.
 
 .sp
 .ne 2
-.mk
 .na
 \fBService Agent Server\fR
 .ad
@@ -52,7 +50,6 @@ to directory agents. By default, \fBslpd\fR is a service agent server.
 
 .sp
 .ne 2
-.mk
 .na
 \fBPassive Directory Agent Discovery \fR
 .ad
@@ -66,7 +63,6 @@ by means of multicast. By default, \fBslpd\fR performs this service.
 
 .sp
 .ne 2
-.mk
 .na
 \fBProxy Registration\fR
 .ad
@@ -98,12 +94,10 @@ to \fB/etc/inet/slp.conf\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIconfiguration-file\fR\fR
 .ad
 .RS 25n
-.rt  
 Specify an alternate configuration file
 .RE
 
@@ -139,23 +133,19 @@ example# svcadm restart network/slp
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/slp.conf\fR\fR
 .ad
 .RS 22n
-.rt  
 The default configuration file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBslpd.reg\fR\fR
 .ad
 .RS 22n
-.rt  
 The proxy registration file
 .RE
 
@@ -167,15 +157,14 @@ See \fBattributes\fR(5)  for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-CSIEnabled
+CSI	Enabled
 _
-Interface Stability		Evolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/smbadm.1m b/usr/src/man/man1m/smbadm.1m
index 7c8ca0c8f5..bd7ec4f262 100644
--- a/usr/src/man/man1m/smbadm.1m
+++ b/usr/src/man/man1m/smbadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH smbadm 1M "8 Jan 2009" "SunOS 5.11" "System Administration Commands"
+.TH SMBADM 1M "Jan 8, 2009"
 .SH NAME
 smbadm \- configure and manage CIFS local groups and users, and manage domain
 membership
@@ -108,7 +108,6 @@ When the \fBCIFS\fR server is started, the following built-in groups are
 available:
 .sp
 .ne 2
-.mk
 .na
 \fBAdministrators\fR
 .ad
@@ -119,7 +118,6 @@ Group members can administer the system.
 
 .sp
 .ne 2
-.mk
 .na
 \fBBackup Operators\fR
 .ad
@@ -130,7 +128,6 @@ Group members can bypass file access controls to back up and restore files.
 
 .sp
 .ne 2
-.mk
 .na
 \fBPower Users\fR
 .ad
@@ -173,7 +170,6 @@ special characters, see the man page for your shell.
 The \fBsmbadm\fR command uses the following operands:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdomain\fR\fR
 .ad
@@ -184,7 +180,6 @@ Specifies the name of an existing Windows domain to join.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIgroup\fR\fR
 .ad
@@ -195,7 +190,6 @@ Specifies the name of the \fBCIFS\fR local group.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIusername\fR\fR
 .ad
@@ -210,7 +204,6 @@ Specifies the name of a Solaris local user.
 The \fBsmbadm\fR command includes these subcommands:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadd-member\fR -m \fImember\fR [[-m \fImember\fR] \&.\|.\|.]
 \fIgroup\fR\fR
@@ -238,7 +231,6 @@ is the name of a user in the \fBsales\fR domain.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcreate\fR [\fB-d\fR \fIdescription\fR] \fIgroup\fR\fR
 .ad
@@ -250,7 +242,6 @@ specify a description of the group by using the \fB-d\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelete\fR \fIgroup\fR\fR
 .ad
@@ -262,7 +253,6 @@ deleted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisable\fR \fIusername\fR\fR
 .ad
@@ -276,7 +266,6 @@ command to modify the user's SMB password until the user account is reenabled.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBenable\fR \fIusername\fR\fR
 .ad
@@ -294,7 +283,6 @@ configuration.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBget\fR [[\fB-p\fR \fIproperty\fR=\fIvalue\fR] \&.\|.\|.] \fIgroup\fR\fR
 .ad
@@ -306,7 +294,6 @@ all property values are shown.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBjoin\fR \fB-u\fR \fIusername\fR \fIdomain\fR\fR
 .ad
@@ -346,7 +333,6 @@ domain.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBjoin\fR \fB-w\fR \fIworkgroup\fR\fR
 .ad
@@ -360,7 +346,6 @@ when using the \fBjoin\fR subcommand.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist\fR\fR
 .ad
@@ -374,45 +359,37 @@ domain names.
 Each entry in the ouput is identified by one of the following tags:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB- [*] -\fR\fR
 .ad
 .RS 11n
-.rt  
 Primary domain
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB- [.] -\fR\fR
 .ad
 .RS 11n
-.rt  
 Local domain
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB- [-] -\fR\fR
 .ad
 .RS 11n
-.rt  
 Other domains
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB- [+] -\fR\fR
 .ad
 .RS 11n
-.rt  
 Selected domain controller
 .RE
 
@@ -420,7 +397,6 @@ Selected domain controller
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremove-member\fR -m \fImember\fR [[-m \fImember\fR] \&.\|.\|.]
 \fIgroup\fR\fR
@@ -449,7 +425,6 @@ is the name of a user in the \fBsales\fR domain.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrename\fR \fIgroup\fR \fInew-group\fR\fR
 .ad
@@ -461,7 +436,6 @@ built-in groups cannot be renamed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBset\fR \fB-p\fR \fIproperty\fR=\fIvalue\fR [[\fB-p\fR
 \fIproperty\fR=\fIvalue\fR] \&.\|.\|.] \fIgroup\fR\fR
@@ -477,7 +451,6 @@ properties to be set on the specified group.
 The group-related properties are as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbackup=[on|off]\fR\fR
 .ad
@@ -489,7 +462,6 @@ controls to back up file system objects.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdescription=\fR\fIdescription-text\fR\fR
 .ad
@@ -500,7 +472,6 @@ Specifies a text description for the \fBCIFS\fR local group.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrestore=[on|off]\fR\fR
 .ad
@@ -512,7 +483,6 @@ controls to restore file system objects.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtake-ownership=[on|off]\fR\fR
 .ad
@@ -526,7 +496,6 @@ file system objects.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshow\fR [\fB-m\fR] [\fB-p\fR] [\fIgroup\fR]\fR
 .ad
@@ -544,23 +513,19 @@ specified, the group privileges are also shown.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB0\fR
 .ad
 .RS 13n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>0\fR
 .ad
 .RS 13n
-.rt  
 An error occurred.
 .RE
 
@@ -573,17 +538,16 @@ attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Utility Name and OptionsUncommitted
+Utility Name and Options	Uncommitted
 _
-Utility Output FormatNot-An-Interface
+Utility Output Format	Not-An-Interface
 _
-\fBsmbadm join\fRObsolete
+\fBsmbadm join\fR	Obsolete
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/smbd.1m b/usr/src/man/man1m/smbd.1m
index b5f5f4b22a..b0d37c4436 100644
--- a/usr/src/man/man1m/smbd.1m
+++ b/usr/src/man/man1m/smbd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH smbd 1M "5 Feb 2008" "SunOS 5.11" "System Administration Commands"
+.TH SMBD 1M "Feb 5, 2008"
 .SH NAME
 smbd \- CIFS server daemon
 .SH SYNOPSIS
@@ -58,34 +58,28 @@ Only one instance of \fBsmbd\fR may be running at a time.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB0\fR
 .ad
 .RS 13n
-.rt  
 Daemon exited cleanly.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB95\fR
 .ad
 .RS 13n
-.rt  
 Daemon exited with a fatal error.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB96\fR
 .ad
 .RS 13n
-.rt  
 Daemon exited with a configuration error.
 .RE
 
@@ -98,13 +92,12 @@ attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/smbiod.1m b/usr/src/man/man1m/smbiod.1m
index acdb13a99e..783dd0adf6 100644
--- a/usr/src/man/man1m/smbiod.1m
+++ b/usr/src/man/man1m/smbiod.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH smbiod 1M "7 Jul 2009" "SunOS 5.11" "System Administration Commands"
+.TH SMBIOD 1M "Jul 7, 2009"
 .SH NAME
 smbiod \- SMB client I/O daemon
 .SH SYNOPSIS
@@ -48,57 +48,47 @@ The \fBsmbiod\fR daemon has no external, customer-accessible interfaces.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB0\fR
 .ad
 .RS 13n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>0\fR
 .ad
 .RS 13n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/smbfs/smbiod\fR\fR
 .ad
 .RS 25n
-.rt  
 SMB I/O daemon.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/tmp/.smbiod-\fIUID\fR\fR\fR
 .ad
 .RS 25n
-.rt  
 File on which to instantiate a door service for user \fIUID\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/run/smbiod-0\fR\fR
 .ad
 .RS 25n
-.rt  
 File on which to instantiate a door service for superuser.
 .RE
 
@@ -111,13 +101,12 @@ attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/smbios.1m b/usr/src/man/man1m/smbios.1m
index 2052503154..8c71627966 100644
--- a/usr/src/man/man1m/smbios.1m
+++ b/usr/src/man/man1m/smbios.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH smbios 1M "31 Aug 2005" "SunOS 5.11" "System Administration Commands"
+.TH SMBIOS 1M "Aug 31, 2005"
 .SH NAME
 smbios \- display the contents of a System Management BIOS image
 .SH SYNOPSIS
@@ -42,12 +42,10 @@ content, the raw hexadecimal data for the structure is displayed.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-B\fR\fR
 .ad
 .RS 11n
-.rt  
 Disable header validation for broken BIOSes.
 .sp
 By default, \fBsmbios\fR attempts to validate the SMBIOS header by verifying
@@ -57,35 +55,29 @@ necessary when a BIOS has a non-compliant header.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
 .RS 11n
-.rt  
  Display the contents of the SMBIOS entry point rather than the contents of the
 SMBIOS structure table.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIid\fR\fR
 .ad
 .RS 11n
-.rt  
 Display only the specified structure, named by its integer id.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-O\fR\fR
 .ad
 .RS 11n
-.rt  
  Display obsolete structure types.
 .sp
 By default, \fBsmbios\fR elides output for structures whose type is marked as
@@ -94,36 +86,30 @@ obsolete in the DMTF SMBIOS specification.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 11n
-.rt  
 Display only a summary listing of the structure identifiers and types, instead
 of the content of each selected structure.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fItype\fR\fR
 .ad
 .RS 11n
-.rt  
 Display only those structures whose type matches the specified integer type, as
 defined the DMTF SMBIOS specification.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR \fIfile\fR\fR
 .ad
 .RS 11n
-.rt  
 Write a copy of the SMBIOS image to the specified file and exit.
 .sp
 The SMBIOS entry point is written to the start of the file with its structure
@@ -133,12 +119,10 @@ point checksum is computed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
 .RS 11n
-.rt  
 Display raw hexadecimal data for the selected structures in addition to
 human-readable output.
 .sp
@@ -152,12 +136,10 @@ human-readable output for the selected structures.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfile\fR\fR
 .ad
 .RS 8n
-.rt  
 Specifies an alternate SMBIOS image to display instead of the current system's
 SMBIOS image.
 .RE
@@ -168,48 +150,40 @@ SMBIOS image.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR \fR
 .ad
 .RS 6n
-.rt  
 Successful completion. All structures in the SMBIOS image were examined
 successfully.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 6n
-.rt  
 A fatal error occurred, such as failure to open the specified file or device,
 or corruption in the image.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 6n
-.rt  
 Invalid command-line options were specified.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/smbios\fR \fR
 .ad
 .RS 16n
-.rt  
 Kernel SMBIOS image device. This device special file is used to export a
 snapshot of the current system SMBIOS image.
 .RE
@@ -222,13 +196,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below. 
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/smbstat.1m b/usr/src/man/man1m/smbstat.1m
index 68df9e1289..7b9635d625 100644
--- a/usr/src/man/man1m/smbstat.1m
+++ b/usr/src/man/man1m/smbstat.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH smbstat 1M "4 Aug 2008" "SunOS 5.11" "System Administration Commands"
+.TH SMBSTAT 1M "Aug 4, 2008"
 .SH NAME
 smbstat \- show Solaris CIFS file server statistics
 .SH SYNOPSIS
@@ -29,7 +29,6 @@ By default, the \fBsmbstat\fR command shows all statistics.
 The \fBsmbstat\fR command includes the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -41,7 +40,6 @@ option shows count statistics based on request activity.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
@@ -50,7 +48,6 @@ option shows count statistics based on request activity.
 Shows the following information for the \fBCIFS\fR server:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconnections\fR\fR
 .ad
@@ -61,7 +58,6 @@ Number of \fBCIFS\fR connections.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBopen_files\fR\fR
 .ad
@@ -72,7 +68,6 @@ Number of files open on the \fBCIFS\fR server.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsessions\fR\fR
 .ad
@@ -89,23 +84,19 @@ Number of active \fBCIFS\fR sessions.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB0\fR
 .ad
 .RS 13n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>0\fR
 .ad
 .RS 13n
-.rt  
 An error occurred.
 .RE
 
@@ -118,15 +109,14 @@ attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 _
-Utility Output FormatNot-an-Interface
+Utility Output Format	Not-an-Interface
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/smrsh.1m b/usr/src/man/man1m/smrsh.1m
index 5eafa402b3..e245fc3567 100644
--- a/usr/src/man/man1m/smrsh.1m
+++ b/usr/src/man/man1m/smrsh.1m
@@ -10,20 +10,20 @@
 .\" Copyright (c) 1998-2006, 2008 Sendmail, Inc. and its suppliers.  All rights reserved.
 .\" The following license terms and conditions apply, unless a different license is obtained from Sendmail, Inc., 6425 Christie Ave, Fourth Floor, Emeryville, CA 94608, USA, or by electronic mail at license@sendmail.com.  License Terms:  Use, Modification and Redistribution
 .\" (including distribution of any modified or derived work) in source and binary forms is permitted only if each of the following conditions is met:  1. Redistributions qualify as "freeware" or "Open Source Software" under    one of the following terms:     (a) Redistributions are made at no charge
-.\" beyond the reasonable cost of        materials and delivery.     (b) Redistributions are accompanied by a copy of the Source Code or by an        irrevocable offer to provide a copy of the Source Code for up to three       years at the cost of materials and delivery.  Such redistributions    
+.\" beyond the reasonable cost of        materials and delivery.     (b) Redistributions are accompanied by a copy of the Source Code or by an        irrevocable offer to provide a copy of the Source Code for up to three       years at the cost of materials and delivery.  Such redistributions
 .\"    must allow further use, modification, and redistribution of the Source       Code under substantially the same terms as this license.  For the        purposes of redistribution "Source Code" means the complete compilable       and linkable source code of sendmail including all modifications.
 .\"  2. Redistributions of source code must retain the copyright notices as they    appear in each source code file, these license terms, and the    disclaimer/limitation of liability set forth as paragraph 6 below.  3. Redistributions in binary form must reproduce the Copyright Notice,    these license
 .\" terms, and the disclaimer/limitation of liability set    forth as paragraph 6 below, in the documentation and/or other materials    provided with the distribution.  For the purposes of binary distribution    the "Copyright Notice" refers to the following language:    "Copyright (c) 1998-2004 Sendmail,
 .\" Inc.  All rights reserved."  4. Neither the name of Sendmail, Inc. nor the University of California nor    the names of their contributors may be used to endorse or promote    products derived from this software without specific prior written    permission.  The name "sendmail" is a trademark
 .\" of Sendmail, Inc.  5. All redistributions must comply with the conditions imposed by the    University of California on certain embedded code, whose copyright    notice and conditions for redistribution are as follows:     (a) Copyright (c) 1988, 1993 The Regents of the University of        California.
 .\"  All rights reserved.     (b) Redistribution and use in source and binary forms, with or without        modification, are permitted provided that the following conditions        are met:        (i)   Redistributions of source code must retain the above copyright             notice, this list of
-.\" conditions and the following disclaimer.        (ii)  Redistributions in binary form must reproduce the above             copyright notice, this list of conditions and the following             disclaimer in the documentation and/or other materials provided             with the distribution. 
+.\" conditions and the following disclaimer.        (ii)  Redistributions in binary form must reproduce the above             copyright notice, this list of conditions and the following             disclaimer in the documentation and/or other materials provided             with the distribution.
 .\"       (iii) Neither the name of the University nor the names of its             contributors may be used to endorse or promote products derived             from this software without specific prior written permission. 6. Disclaimer/Limitation of Liability: THIS SOFTWARE IS PROVIDED BY    SENDMAIL,
 .\" INC. AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED    WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF    MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN    NO EVENT SHALL SENDMAIL, INC., THE REGENTS OF THE UNIVERSITY OF    CALIFORNIA OR CONTRIBUTORS
 .\" BE LIABLE FOR ANY DIRECT, INDIRECT,    INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT    NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF    USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON    ANY THEORY OF LIABILITY, WHETHER
 .\" IN CONTRACT, STRICT LIABILITY, OR TORT    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF    THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
 .\" Copyright (c) 2009, Sun Microsystems, Inc.  All Rights Reserved.
-.TH smrsh 1M "6 Nov 1998" "SunOS 5.11" "System Administration Commands"
+.TH SMRSH 1M "Nov 6, 1998"
 .SH NAME
 smrsh \- restricted shell for sendmail
 .SH SYNOPSIS
@@ -70,24 +70,20 @@ arbitrary programs.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcommand\fR\fR
 .ad
 .RS 14n
-.rt  
 Where \fIcommand\fR is a valid command, executes \fIcommand\fR.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/sm.bin\fR\fR
 .ad
 .RS 19n
-.rt  
 directory for restricted programs
 .RE
 
diff --git a/usr/src/man/man1m/smtnrhdb.1m b/usr/src/man/man1m/smtnrhdb.1m
index 3ed146d3e3..8b8486213e 100644
--- a/usr/src/man/man1m/smtnrhdb.1m
+++ b/usr/src/man/man1m/smtnrhdb.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH smtnrhdb 1M "19 Dec 2008" "SunOS 5.11" "System Administration Commands"
+.TH SMTNRHDB 1M "Dec 19, 2008"
 .SH NAME
 smtnrhdb \- manage entries in the tnrhdb database
 .SH SYNOPSIS
@@ -62,7 +62,6 @@ for the format of valid addresses.
 \fBsmtnrhdb\fR \fIsubcommand\fRs are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadd\fR\fR
 .ad
@@ -75,7 +74,6 @@ administrator must have the \fBsolaris.network.host.write\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelete\fR\fR
 .ad
@@ -88,7 +86,6 @@ administrator must have the \fBsolaris.network.host.write\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist\fR\fR
 .ad
@@ -101,7 +98,6 @@ administrator must have the \fBsolaris.network.host.read\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmodify\fR\fR
 .ad
@@ -133,7 +129,6 @@ options can also be specified by their equivalent option words preceded by a
 double dash. For example, you can use either \fB-D\fR or \fB--domain\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR | \fB--domain\fR \fIdomain\fR\fR
 .ad
@@ -152,7 +147,6 @@ tool-by-tool basis; this option specifies the domain for all other tools.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-H\fR | \fB--hostname\fR \fIhost_name:port\fR\fR
 .ad
@@ -166,7 +160,6 @@ Console connects to the local host on port \fB898\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR | \fB--rolepassword\fR \fIrole_password\fR\fR
 .ad
@@ -181,7 +174,6 @@ insecure.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR | \fB--password\fR \fIpassword\fR\fR
 .ad
@@ -195,7 +187,6 @@ insecure.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR | \fB--rolename\fR \fIrole_name\fR\fR
 .ad
@@ -207,7 +198,6 @@ role is assumed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR | \fB--username\fR \fIuser_name\fR\fR
 .ad
@@ -219,7 +209,6 @@ the user identity running the console process is assumed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--\fR\fR
 .ad
@@ -236,7 +225,6 @@ not enter the preceding options, you must still enter the \fB--\fR option.
 be enclosed in double quotes.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -247,7 +235,6 @@ Displays the command's usage statement.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-H\fR \fIhostname\fR\fR
 .ad
@@ -260,7 +247,6 @@ specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIipaddress\fR\fR
 .ad
@@ -273,7 +259,6 @@ hostname subcommand argument is specified. This option is not valid with the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fItemplatename\fR\fR
 .ad
@@ -284,7 +269,6 @@ Specifies the name of an existing template.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIprefixlen\fR\fR
 .ad
@@ -301,7 +285,6 @@ the 192.168.0.0 network.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR \fIipaddress-wildcard\fR\fR
 .ad
@@ -460,7 +443,7 @@ a wildcard.
  -- -w 192.168.0.0 -p 24 -n cipso\fR
 
 Login to machine1.ExampleCo.COM as user root was successful.
-Download of com.exampleco.admin.hostmgr.cli.smtnrhdb.HostMgrTnrhdbCli 
+Download of com.exampleco.admin.hostmgr.cli.smtnrhdb.HostMgrTnrhdbCli
 from machine1.ExampleCo.COM was successful.
 .fi
 .in -2
@@ -472,7 +455,6 @@ from machine1.ExampleCo.COM was successful.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -483,7 +465,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
@@ -494,7 +475,6 @@ Invalid command syntax. A usage message displays.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
@@ -509,7 +489,6 @@ An error occurred while executing the command. An error message displays.
 The following files are used by the \fBsmtnrhdb\fR command:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/tsol/tnrhdb\fR\fR
 .ad
@@ -526,13 +505,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/smtnrhtp.1m b/usr/src/man/man1m/smtnrhtp.1m
index 69ec1db823..aa020f24f5 100644
--- a/usr/src/man/man1m/smtnrhtp.1m
+++ b/usr/src/man/man1m/smtnrhtp.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH smtnrhtp 1M "31 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH SMTNRHTP 1M "Oct 31, 2007"
 .SH NAME
 smtnrhtp \- manage entries in the trusted network template database
 .SH SYNOPSIS
@@ -22,12 +22,10 @@ The \fBsmtnrhtp\fR command adds, modifies, deletes, and lists entries in the
 \fBsmtnrhtp\fR \fIsubcommand\fRs are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadd\fR\fR
 .ad
 .RS 10n
-.rt  
 Adds a new entry to the \fBtnrhtp\fR database. To add an entry, the
 administrator must have the \fBsolaris.network.security.read\fR and
 \fBsolaris.network.security.write\fR authorizations.
@@ -35,12 +33,10 @@ administrator must have the \fBsolaris.network.security.read\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmodify\fR\fR
 .ad
 .RS 10n
-.rt  
 Modifies an entry in the \fBtnrhtp\fR database. To modify an entry, the
 administrator must have the \fBsolaris.network.security.read\fR and
 \fBsolaris.network.security.write\fR authorizations.
@@ -48,12 +44,10 @@ administrator must have the \fBsolaris.network.security.read\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelete\fR\fR
 .ad
 .RS 10n
-.rt  
 Deletes an entry from \fBtnrhtp\fR database. To delete an entry, the
 administrator must have the \fBsolaris.network.security.read\fR and
 \fBsolaris.network.security.write\fR authorizations.
@@ -61,12 +55,10 @@ administrator must have the \fBsolaris.network.security.read\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist\fR\fR
 .ad
 .RS 10n
-.rt  
 Lists entries in the \fBtnrhtp\fR database. To list an entry, the administrator
 must have the \fBsolaris.network.security.read\fR authorizations.
 .RE
@@ -95,7 +87,6 @@ options can also be specified by their equivalent option words preceded by a
 double dash. For example, you can use either \fB-D\fR or \fB--domain\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR | \fB--domain\fR \fIdomain\fR\fR
 .ad
@@ -114,7 +105,6 @@ tool-by-tool basis; this option specifies the domain for all other tools.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-H\fR | \fB--hostname\fR \fIhost_name:port\fR\fR
 .ad
@@ -128,7 +118,6 @@ Console connects to the local host on port \fB898\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR | \fB--rolepassword\fR \fIrole_password\fR\fR
 .ad
@@ -143,7 +132,6 @@ insecure.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR | \fB--password\fR \fIpassword\fR\fR
 .ad
@@ -157,7 +145,6 @@ insecure.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR | \fB--rolename\fR \fIrole_name\fR\fR
 .ad
@@ -169,7 +156,6 @@ role is assumed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR | \fB--username\fR \fIuser_name\fR\fR
 .ad
@@ -181,7 +167,6 @@ the user identity running the console process is assumed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--\fR\fR
 .ad
@@ -198,34 +183,28 @@ Descriptions and other argument options that contain white spaces must be
 enclosed in double quotes.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 26n
-.rt  
 Displays the command's usage statement.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fItemplatename\fR\fR
 .ad
 .RS 26n
-.rt  
 Specifies the name of the template.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fIhosttype\fR\fR
 .ad
 .RS 26n
-.rt  
 Specifies the host type of the new host. Valid values are \fBunlabeled\fR and
 \fBcipso\fR. The \fBcipso\fR host type is for hosts that use CIPSO (Common IP
 Security Options - Tag Type 1 only) to label packets.
@@ -233,12 +212,10 @@ Security Options - Tag Type 1 only) to label packets.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fBdoi\fR=\fIdoi-value\fR\fR
 .ad
 .RS 26n
-.rt  
 Specifies the \fBDOI\fR value (the domain of interpretation). In the case of
 the \fBunlabeled\fR host type, this is the domain of interpretation for the
 \fBdef_label\fR.
@@ -254,12 +231,10 @@ templates that have that same \fBdoi\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fBmax\fR=\fImaximum-label\fR\fR
 .ad
 .RS 26n
-.rt  
 Specifies the maximum label. Together with \fBmin\fR, this value specifies the
 label accreditation range for the remote hosts that use this template. Values
 can be a hex value or string (such as \fBadmin_high\fR).
@@ -267,12 +242,10 @@ can be a hex value or string (such as \fBadmin_high\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fBmin\fR=\fIminimum-label\fR\fR
 .ad
 .RS 26n
-.rt  
 Specifies the minimum label. Together with \fBmax\fR, this value specifies the
 label accreditation range for the remote hosts that use this template. For
 gateway systems, \fBmin\fR and \fBmax\fR define the default range for
@@ -285,12 +258,10 @@ the security template is used. Values can be a hex value or string (such as
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fBlabel\fR=\fIdefault-label\fR\fR
 .ad
 .RS 26n
-.rt  
 Specifies the default label  to be applied to incoming data from remote hosts
 that do not support these attributes. This option does not apply if
 \fIhosttype\fR is \fBcipso\fR. Values can be a hex value or string (such as
@@ -299,12 +270,10 @@ that do not support these attributes. This option does not apply if
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fBslset\fR=\fIl1\fR,\fIl2\fR,\fIl3\fR,\fIl4\fR\fR
 .ad
 .RS 26n
-.rt  
 Specifies a set of sensitivity labels. For gateway systems, the labels in
 \fBslset\fR are used for forwarding labeled packets. \fBslset\fR is optional.
 You can specify up to four label values, separated by commas. Values can be a
@@ -465,34 +434,28 @@ add -D ldap:\fIdirectoryname\fR -H \fIservername\fR:898 -- \e
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Invalid command syntax. A usage message displays.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 An error occurred while executing the command. An error message displays.
 .RE
 
@@ -502,12 +465,10 @@ An error occurred while executing the command. An error message displays.
 The following files are used by the \fBsmtnrhtp\fR command:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/tsol/tnrhtp\fR\fR
 .ad
 .RS 29n
-.rt  
 Trusted network remote-host templates.
 .RE
 
@@ -519,13 +480,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/smtnzonecfg.1m b/usr/src/man/man1m/smtnzonecfg.1m
index bc80645eaa..022c8f3cef 100644
--- a/usr/src/man/man1m/smtnzonecfg.1m
+++ b/usr/src/man/man1m/smtnzonecfg.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH smtnzonecfg 1M "31 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH SMTNZONECFG 1M "Oct 31, 2007"
 .SH NAME
 smtnzonecfg \- manage entries in the zone configuration database for Trusted
 Extensions networking
@@ -23,12 +23,10 @@ The \fBsmtnzonecfg\fR command adds, modifies, deletes, and lists entries in the
 \fBsmtnzonecfg\fR \fIsubcommand\fRs are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadd\fR\fR
 .ad
 .RS 10n
-.rt  
 Adds a new entry to the \fBtnzonecfg\fR database. To add an entry, the
 administrator must have the \fBsolaris.network.host.write\fR and
 \fBsolaris.network.security.write\fR authorizations.
@@ -36,12 +34,10 @@ administrator must have the \fBsolaris.network.host.write\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmodify\fR\fR
 .ad
 .RS 10n
-.rt  
 Modifies an entry in the \fBtnzonecfg\fR database. To modify an entry, the
 administrator must have the \fBsolaris.network.host.write\fR and
 \fBsolaris.network.security.write\fR authorizations.
@@ -49,12 +45,10 @@ administrator must have the \fBsolaris.network.host.write\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelete\fR\fR
 .ad
 .RS 10n
-.rt  
 Deletes an entry from the \fBtnzonecfg\fR database. To delete an entry, the
 administrator must have the \fBsolaris.network.host.write\fR and
 \fBsolaris.network.security.write\fR authorizations.
@@ -62,12 +56,10 @@ administrator must have the \fBsolaris.network.host.write\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist\fR\fR
 .ad
 .RS 10n
-.rt  
 Lists entries in the \fBtnzonecfg\fR database. To list an entry, the
 administrator must have the \fBsolaris.network.host.read\fR and
 \fBsolaris.network.security.read\fR authorizations.
@@ -97,7 +89,6 @@ options can also be specified by their equivalent option words preceded by a
 double dash. For example, you can use either \fB-D\fR or \fB--domain\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR | \fB--domain\fR \fIdomain\fR\fR
 .ad
@@ -116,7 +107,6 @@ tool-by-tool basis. This option specifies the domain for all other tools.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-H\fR | \fB--hostname\fR \fIhost_name:port\fR\fR
 .ad
@@ -130,7 +120,6 @@ Console connects to the local host on port \fB898\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR | \fB--rolepassword\fR \fIrole_password\fR\fR
 .ad
@@ -145,7 +134,6 @@ insecure.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR | \fB--password\fR \fIpassword\fR\fR
 .ad
@@ -159,7 +147,6 @@ insecure.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR | \fB--rolename\fR \fIrole_name\fR\fR
 .ad
@@ -171,7 +158,6 @@ role is assumed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR | \fB--username\fR \fIuser_name\fR\fR
 .ad
@@ -183,7 +169,6 @@ the user identity running the console process is assumed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--\fR\fR
 .ad
@@ -200,7 +185,6 @@ Descriptions and other argument options that contain white spaces must be
 enclosed in double quotes.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -211,7 +195,6 @@ Displays the command's usage statement.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fIzonename\fR\fR
 .ad
@@ -234,7 +217,6 @@ configured zones:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlabel\fR\fR
 .ad
@@ -246,7 +228,6 @@ zone is booted. Each zone must have a unique label.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x policymatch\fR=\fB0\fR|\fB1\fR\fR
 .ad
@@ -268,7 +249,6 @@ value of 0.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x mlpzone\fR=""|\fIport/protocol\fR\fR
 .ad
@@ -295,7 +275,6 @@ the \fBpublic\fR zone has a label range from \fBPUBLIC\fR to \fBINTERNAL\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x mlpshared\fR=""|\fIport/protocol\fR\fR
 .ad
@@ -324,7 +303,7 @@ One of the following sets of arguments must be specified for subcommand
 .nf
 \fB-n\fR \fIzonename\fR \fB-l\fR \fIlabel\fR [\fB-x\fR policymatch=\fIpolicy-match-level\fR \e
 \fB-x\fR mlpzone=\fIport/protocol\fR;.... | \e
-\fB-x\fR mlpshared=\fIport/protocol\fR;.... ] 
+\fB-x\fR mlpshared=\fIport/protocol\fR;.... ]
 \fB-h\fR
 .fi
 .in -2
@@ -342,7 +321,7 @@ One of the following sets of arguments must be specified for subcommand
 .nf
 \fB-n\fR \fIzonename\fR [\fB-l\fR \fIlabel\fR] [\fB-x\fR policymatch=\fIpolicy-match-level\fR \e
 \fB-x\fR mlpzone=\fIport/protocol\fR;.... |\e
-\fB-x\fR mlpshared=\fIport/protocol\fR;.... ] 
+\fB-x\fR mlpshared=\fIport/protocol\fR;.... ]
 \fB-h\fR
 .fi
 .in -2
@@ -433,34 +412,28 @@ $ \fB/usr/sadm/bin/smtnzonecfg list --\fR
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Invalid command syntax. A usage message displays.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 An error occurred while executing the command. An error message displays.
 .RE
 
@@ -470,7 +443,6 @@ An error occurred while executing the command. An error message displays.
 The following files are used by the \fBsmtnzonecfg\fR command:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/tsol/tnzonecfg\fR\fR
 .ad
@@ -487,13 +459,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/sndradm.1m b/usr/src/man/man1m/sndradm.1m
index f7cbc8e8e6..eddd56c052 100644
--- a/usr/src/man/man1m/sndradm.1m
+++ b/usr/src/man/man1m/sndradm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH sndradm 1M "2 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH SNDRADM 1M "Oct 2, 2007"
 .SH NAME
 sndradm \- control Sun StorageTek Availability Suite Remote Mirror operations
 .SH SYNOPSIS
@@ -207,7 +207,6 @@ print (\fB-p\fR, \fB-P\fR and \fB-i\fR), help (\fB-h\fR), and version
 The \fBsndradm\fR utility supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIvolset-file\fR\fR
 .ad
@@ -220,7 +219,6 @@ Remote Mirror sets in the same format as the fully specified command line
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR \fIio_groupname\fR\fR
 .ad
@@ -235,7 +233,6 @@ primary and the secondary hosts.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR \fItag\fR\fR
 .ad
@@ -248,7 +245,6 @@ belonging to the cluster resource group or disk group name specified by
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -263,7 +259,6 @@ prompts: \fB"Overwrite secondary with primary? (Y/N) [N]"\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsndr_set\fR\fR
 .ad
@@ -283,7 +278,6 @@ fully specified Remote Mirror set in the same format as a configuration file:
 These parameters are described as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIphost\fR\fR
 .ad
@@ -294,7 +288,6 @@ Specifies the server on which the primary volume resides.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpdev\fR\fR
 .ad
@@ -306,7 +299,6 @@ only (for example, \fB/dev/rdsk/c0t1d0s2\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpbitmap\fR\fR
 .ad
@@ -319,7 +311,6 @@ primary partition is stored. Specify full pathnames only (for example,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIshost\fR\fR
 .ad
@@ -330,7 +321,6 @@ Specifies the server on which the secondary volume resides.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsdev\fR\fR
 .ad
@@ -342,7 +332,6 @@ example, \fB/dev/rdsk/c0t1d0s4\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsbitmap\fR\fR
 .ad
@@ -355,7 +344,6 @@ secondary partition is stored. Specify full path names only (for example,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBip\fR\fR
 .ad
@@ -366,7 +354,6 @@ Specifies the network transfer protocol.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsync | async\fR\fR
 .ad
@@ -381,7 +368,6 @@ volume.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIio_groupname\fR\fR
 .ad
@@ -400,7 +386,6 @@ primary and the secondary hosts.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fItag\fR\fR
 .ad
@@ -425,7 +410,6 @@ system that is not clustered.
 A valid \fBsndradm\fR command must specify one of the parameters listed below.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR \fBa\fR \fImaster\fR \fIshadow\fR \fIbitmap\fR\fR
 .ad
@@ -441,7 +425,6 @@ See \fBiiadm\fR(1M)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR \fBd\fR \fImaster\fR \fB\fIshadow\fR\fR \fB\fIbitmap\fR\fR\fR
 .ad
@@ -454,7 +437,6 @@ list \fBndr_ii\fR configuration entries.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIvalue\fR\fR
 .ad
@@ -473,7 +455,6 @@ set, look for the"\fBauto=on;\fR" tag for the set in the output of \fBdscfg\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR \fIvalue\fR\fR
 .ad
@@ -486,7 +467,6 @@ is \fB2\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-W\fR \fIvalue\fR\fR
 .ad
@@ -503,7 +483,6 @@ async I/O queues. This value is ignored when disk based I/O queues are used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR \fB{block\fR \fB|\fR \fBnoblock}\fR\fR
 .ad
@@ -522,7 +501,6 @@ secondary site.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fIvalue\fR\fR
 .ad
@@ -537,7 +515,6 @@ async I/O queues. This value isignored when disk-based I/O queues are used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -548,7 +525,6 @@ Prints the \fBsndradm\fR usage summary.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -559,7 +535,6 @@ Prints the Remote Mirror version number.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
@@ -574,7 +549,6 @@ local volume and the bitmap volume are enabled for the Storage Volume driver
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-E\fR\fR
 .ad
@@ -589,7 +563,6 @@ volume are enabled for the Storage Volume driver (see \fBsv\fR(7D)).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -602,7 +575,6 @@ track temporary differences between primary and secondary volumes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
@@ -626,7 +598,6 @@ synchronizing.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR\fR
 .ad
@@ -638,7 +609,6 @@ if invoked on the secondary system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-H\fR\fR
 .ad
@@ -654,7 +624,6 @@ indicate a problem with the link.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
@@ -665,7 +634,6 @@ Displays a list of configured Remote Mirror volumes or sets.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR\fR
 .ad
@@ -677,7 +645,6 @@ Displays a list of configured Remote Mirror volumes or sets with extra details.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR \fBa\fR \fIvolume\fR\fR
 .ad
@@ -689,7 +656,6 @@ group is in logging mode.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR \fBd\fR\fR
 .ad
@@ -701,7 +667,6 @@ or group is in logging mode.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR \fBr\fR \fIvolume\fR\fR
 .ad
@@ -715,7 +680,6 @@ logging mode.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
@@ -727,7 +691,6 @@ as the \fIvolset-file\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR\fR
 .ad
@@ -738,7 +701,6 @@ Attempt to reset a Remote Mirror set's error condition such as failed bitmaps.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fBb\fR \fBp\fR \fIbitmap\fR\fR
 .ad
@@ -751,7 +713,6 @@ reconfigure the primary bitmap for one set at a time.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fBb\fR \fBs\fR \fIbitmap\fR\fR
 .ad
@@ -764,7 +725,6 @@ reconfigure the secondary bitmap for one set at a time.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fBC\fR \fItag\fR\fR
 .ad
@@ -778,7 +738,6 @@ is not clustered.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fBm\fR \fB{sync\fR \fB|\fR \fBasync}\fR\fR
 .ad
@@ -791,7 +750,6 @@ not possible to mix modes within a group.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fBg\fR \fIgroup\fR\fR
 .ad
@@ -809,7 +767,6 @@ reconfiguring the consistency group.
 The following parameters can be issued only from the primary server:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
@@ -824,7 +781,6 @@ incrementally resynchronize the volumes. See EXIT STATUS.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -850,7 +806,6 @@ volumes match before replication of new updates resumes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
@@ -870,7 +825,6 @@ the primary volume.
 The following are the states that can be returned from \fBsndradm\fR \fB-P\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvolume\fR \fBfailed\fR\fR
 .ad
@@ -881,7 +835,6 @@ An I/O operation to the local data volume has failed
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbitmap\fR \fBfailed\fR\fR
 .ad
@@ -892,7 +845,6 @@ An I/O operation to the local bitmap volume has failed
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisk\fR \fBqueue\fR \fBfailed\fR\fR
 .ad
@@ -903,7 +855,6 @@ An I/O operation to disk queue volume has failed
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBneed\fR \fBsync\fR\fR
 .ad
@@ -916,7 +867,6 @@ changed until one or the other is done.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBneed\fR \fBreverse\fR \fBsync\fR\fR
 .ad
@@ -929,7 +879,6 @@ be changed until one or the other is done.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlogging\fR\fR
 .ad
@@ -944,7 +893,6 @@ queues the request for later replication by the async flushers.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBreverse\fR \fBsyncing\fR\fR
 .ad
@@ -955,7 +903,6 @@ A secondary to primary copy is in progress.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsyncing\fR\fR
 .ad
@@ -966,7 +913,6 @@ A primary to secondary copy is in progress.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBqueuing\fR\fR
 .ad
@@ -1053,23 +999,19 @@ example% \fBsndradm -d example-remote:/dev/rdsk/c2t3d0s5\fR
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 13n
-.rt  
 Command completed successfully.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 13n
-.rt  
 An error occurred.
 .RE
 
@@ -1086,13 +1028,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/sndrd.1m b/usr/src/man/man1m/sndrd.1m
index bfde91b922..59602dc677 100644
--- a/usr/src/man/man1m/sndrd.1m
+++ b/usr/src/man/man1m/sndrd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH sndrd 1M "2 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH SNDRD 1M "Oct 2, 2007"
 .SH NAME
 sndrd \- Remote Mirror daemon
 .SH SYNOPSIS
@@ -30,7 +30,6 @@ than editing the \fB/lib/svc/method/svc-rdcsyncd\fR file. See \fBsndr\fR(4).
 The \fBsndrd\fR daemon supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fImax_connections\fR\fR
 .ad
@@ -42,7 +41,6 @@ connection-oriented transports. By default, the number of connections is 16.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlisten_backlog\fR\fR
 .ad
@@ -55,23 +53,19 @@ transport. The default value is 10 entries.
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 13n
-.rt  
 Daemon started successfully.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 13n
-.rt  
 Daemon failed to start.
 .RE
 
@@ -81,7 +75,6 @@ Error information is reported to \fBsyslog\fR at level \fBLOG_ERR\fR.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/lib/svc/method/svc-rdcsyncd\fR\fR
 .ad
@@ -92,7 +85,6 @@ Shell script for starting \fBsndrd\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/lib/svc/method/svc-rdc\fR\fR
 .ad
@@ -109,13 +101,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/sndrsyncd.1m b/usr/src/man/man1m/sndrsyncd.1m
index 4d7f0579ca..695a06b300 100644
--- a/usr/src/man/man1m/sndrsyncd.1m
+++ b/usr/src/man/man1m/sndrsyncd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH sndrsyncd 1M "2 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH SNDRSYNCD 1M "Oct 2, 2007"
 .SH NAME
 sndrsyncd \- Availability Suite Remote Mirror update resynchronization daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/sndrsyncd\fR 
+\fB/usr/lib/sndrsyncd\fR
 .fi
 
 .SH DESCRIPTION
@@ -36,30 +36,25 @@ currently mounted.
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 13n
-.rt  
 Daemon started successfully.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 13n
-.rt  
 Daemon failed to start.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/lib/svc/method/svc-rdcsyncd\fR\fR
 .ad
@@ -70,7 +65,6 @@ Shell script for starting \fBsndrsyncd\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/lib/svc/method/svc-rdc\fR\fR
 .ad
@@ -87,13 +81,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/snoop.1m b/usr/src/man/man1m/snoop.1m
index 079e4c0865..ca969e22b4 100644
--- a/usr/src/man/man1m/snoop.1m
+++ b/usr/src/man/man1m/snoop.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH snoop 1M "18 Feb 2009" "SunOS 5.11" "System Administration Commands"
+.TH SNOOP 1M "Feb 18, 2009"
 .SH NAME
 snoop \- capture and inspect network packets
 .SH SYNOPSIS
@@ -46,7 +46,6 @@ host names as numeric IP addresses.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR\fR
 .ad
@@ -58,7 +57,6 @@ filter, or \fBsnoop\fR's own filter.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
@@ -69,7 +67,6 @@ Display number of packets dropped during capture on the summary line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-N\fR\fR
 .ad
@@ -86,7 +83,6 @@ are not displayed when this flag is used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR \fIinterface\fR\fR
 .ad
@@ -100,7 +96,6 @@ mutually exclusive.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR\fR
 .ad
@@ -112,7 +107,6 @@ addressed to the host machine will be seen.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR\fR
 .ad
@@ -123,7 +117,6 @@ Display size of the entire link layer frame in bytes on the summary line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
@@ -142,7 +135,6 @@ grep RPC\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -153,7 +145,6 @@ Listen to packets on \fB/dev/audio\fR (warning: can be noisy).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fImaxcount\fR\fR
 .ad
@@ -165,7 +156,6 @@ there is no disk space left or until interrupted with Control-C.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdatalink\fR\fR
 .ad
@@ -179,7 +169,6 @@ by \fIdatalink\fR, for example, \fBbge0\fR or \fBnet0\fR. The \fBdladm\fR(1M)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIfilename\fR\fR
 .ad
@@ -193,7 +182,6 @@ the \fBsnoop\fR \fBIP\fR address-to-name mapping table (See \fB-N\fR flag).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fIfilename\fR\fR
 .ad
@@ -206,7 +194,6 @@ hostname).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIfilename\fR\fR
 .ad
@@ -221,7 +208,6 @@ without saving to a file, name the file \fB/dev/null\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIfirst\fR [ , \fBlast\fR ]\fR
 .ad
@@ -233,7 +219,6 @@ packet in the file is packet number 1.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
@@ -245,7 +230,6 @@ This can improve packet capturing performance.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -259,7 +243,6 @@ the mapping file, its corresponding name will be used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsnaplen\fR\fR
 .ad
@@ -278,7 +261,6 @@ and for \fBTCP\fR use 54. You can capture \fBRPC\fR headers with a
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR [ \fBr\fR | \fBa\fR | \fBd\fR ]\fR
 .ad
@@ -294,7 +276,6 @@ to any selected packet.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -306,7 +287,6 @@ many lines per packet and should be used only on selected packets.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-x\fR\fIoffset\fR [ , \fIlength\fR]\fR
 .ad
@@ -321,7 +301,6 @@ provided, the rest of the packet is displayed.
 .SH OPERANDS
 .sp
 .ne 2
-.mk
 .na
 \fB\fIexpression\fR\fR
 .ad
@@ -358,7 +337,6 @@ information about setting up more efficient filters.
 The primitives are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhost\fR \fIhostname\fR\fR
 .ad
@@ -380,7 +358,6 @@ words, snoop tries to filter on all IP addresses associated with hostname.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIinet\fR or \fIinet6\fR\fR
 .ad
@@ -394,7 +371,6 @@ IPv6 addresses returned from a name lookup.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIipaddr\fR, \fIatalkaddr\fR, or \fIetheraddr\fR\fR
 .ad
@@ -436,7 +412,6 @@ zero to make it \fB0aa:0:45:23:52:44\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfrom\fR or \fBsrc\fR\fR
 .ad
@@ -449,7 +424,6 @@ just the source address, port, or \fBRPC\fR reply.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBto\fR or \fBdst\fR\fR
 .ad
@@ -462,7 +436,6 @@ just the destination address, port, or \fBRPC\fR call.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBether\fR\fR
 .ad
@@ -475,7 +448,6 @@ option is not supported on media such as IPoIB (IP over InfiniBand).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBethertype\fR \fInumber\fR\fR
 .ad
@@ -488,7 +460,6 @@ encapsulated Ethernet type.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBip\fR, \fBip6\fR, \fBarp\fR, \fBrarp\fR, \fBpppoed\fR, \fBpppoes\fR\fR
 .ad
@@ -499,7 +470,6 @@ True if the packet is of the appropriate ethertype.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvlan\fR\fR
 .ad
@@ -510,7 +480,6 @@ True if the packet has \fBethertype\fR VLAN and the VLAN ID is not zero.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvlan-id\fR \fIid\fR\fR
 .ad
@@ -521,7 +490,6 @@ True for packets of ethertype VLAN with the id \fIid\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpppoe\fR\fR
 .ad
@@ -532,7 +500,6 @@ True if the ethertype of the packet is either \fBpppoed\fR or \fBpppoes\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbroadcast\fR\fR
 .ad
@@ -545,7 +512,6 @@ True if the packet is a broadcast packet. Equivalent to \fBether[2:4] =
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmulticast\fR\fR
 .ad
@@ -558,7 +524,6 @@ InfiniBand).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbootp\fR, \fBdhcp\fR\fR
 .ad
@@ -571,7 +536,6 @@ port of \fBBOOTPC (68)\fR and a destination of \fBBOOTPS (67)\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdhcp6\fR\fR
 .ad
@@ -585,7 +549,6 @@ of \fBDHCPV6-SERVER\fR (547) and a destination port of \fBDHCPV6-CLIENT\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBapple\fR\fR
 .ad
@@ -597,7 +560,6 @@ True if the packet is an Apple Ethertalk packet. Equivalent to "\fBethertype
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdecnet\fR\fR
 .ad
@@ -608,7 +570,6 @@ True if the packet is a \fBDECNET\fR packet.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgreater\fR \fIlength\fR\fR
 .ad
@@ -619,7 +580,6 @@ True if the packet is longer than \fIlength\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBless\fR \fIlength\fR\fR
 .ad
@@ -630,7 +590,6 @@ True if the packet is shorter than \fIlength\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBudp\fR, \fBtcp\fR, \fBicmp\fR, \fBicmp6\fR, \fBah\fR, \fBesp\fR\fR
 .ad
@@ -641,7 +600,6 @@ True if the \fBIP\fR or IPv6 protocol is of the appropriate type.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnet\fR \fInet\fR\fR
 .ad
@@ -655,7 +613,6 @@ address.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBport\fR \fIport\fR\fR
 .ad
@@ -670,7 +627,6 @@ the \fIport\fR occurs only as the source or destination.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrpc\fR \fIprog\fR [ , \fIvers\fR [ , \fBproc\fR ] ]\fR
 .ad
@@ -687,7 +643,6 @@ select either call or reply packets only.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzone\fR \fIzoneid\fR\fR
 .ad
@@ -699,7 +654,6 @@ packet received on an \fBipnet\fR device.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBldap\fR\fR
 .ad
@@ -710,7 +664,6 @@ True if the packet is an \fBLDAP\fR packet on port 389.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgateway\fR \fIhost\fR\fR
 .ad
@@ -723,7 +676,6 @@ Equivalent to "\fBether host\fR \fIhost\fR and not host \fIhost\fR".
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnofrag\fR\fR
 .ad
@@ -735,7 +687,6 @@ fragments. Equivalent to \fBip[6:2] & 0x1fff = 0\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIexpr\fR \fIrelop\fR \fIexpr\fR\fR
 .ad
@@ -818,7 +769,6 @@ instance "\fBlength > 60\fR" is equivalent to "\fBgreater 60\fR", and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBand\fR\fR
 .ad
@@ -831,7 +781,6 @@ example "\fBdinky pinky\fR" is the same as "\fBdinky AND pinky\fR".
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBor\fR or \fB,\fR\fR
 .ad
@@ -844,7 +793,6 @@ pinky\fR".
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnot\fR or \fB!\fR\fR
 .ad
@@ -856,7 +804,6 @@ operator is evaluated before \fBAND\fR or OR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBslp\fR\fR
 .ad
@@ -867,7 +814,6 @@ True if the packet is an \fBSLP\fR packet.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsctp\fR\fR
 .ad
@@ -878,7 +824,6 @@ True if the packet is an \fBSCTP\fR packet.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBospf\fR\fR
 .ad
@@ -1019,7 +964,7 @@ NFS:  File name = MTra00192
 NFS:  File handle = 000016430000000100080000305A1C47
 NFS:                597A0000000800002046314AFC450000
 NFS:  File name = .nfs08
-NFS:  
+NFS:
 .fi
 .in -2
 .sp
@@ -1033,7 +978,7 @@ To view just the \fBNFS\fR packets between \fBsunroof\fR and \fBboutique\fR:
 .nf
 example# \fBsnoop -i pkts rpc nfs and sunroof and boutique\fR
 1   0.0000   boutique -> sunroof    NFS C GETATTR FH=8E6C
-2   0.0046    sunroof -> boutique   NFS R GETATTR OK  
+2   0.0046    sunroof -> boutique   NFS R GETATTR OK
 3   0.0080   boutique -> sunroof   NFS C RENAME FH=8E6C MTra00192 to .nfs08
 .fi
 .in -2
@@ -1123,79 +1068,65 @@ example# \fBsnoop funky and pinky and (tcp or udp) and port 80\fR
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/audio\fR\fR
 .ad
 .RS 17n
-.rt  
 Symbolic link to the system's primary audio device.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/null\fR\fR
 .ad
 .RS 17n
-.rt  
 The null file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/hosts\fR\fR
 .ad
 .RS 17n
-.rt  
 Host name database.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/rpc\fR\fR
 .ad
 .RS 17n
-.rt  
 RPC program number data base.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/services\fR\fR
 .ad
 .RS 17n
-.rt  
 Internet services and aliases.
 .RE
 
diff --git a/usr/src/man/man1m/soconfig.1m b/usr/src/man/man1m/soconfig.1m
index 16da22850d..41743d4e1d 100644
--- a/usr/src/man/man1m/soconfig.1m
+++ b/usr/src/man/man1m/soconfig.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH soconfig 1M "29 Oct 2008" "SunOS 5.11" "System Administration Commands"
+.TH SOCONFIG 1M "Oct 29, 2008"
 .SH NAME
 soconfig \- configure transport providers for use by sockets
 .SH SYNOPSIS
@@ -35,12 +35,10 @@ during the booting sequence.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfile\fR\fR
 .ad
 .RS 11n
-.rt  
 Set up the \fBsoconfig\fR configuration for each driver according to the
 information stored in \fBfile\fR. A \fBsoconfig\fR file consists of lines of at
 least the first three fields listed below, separated by spaces:
@@ -58,36 +56,30 @@ An example of \fBfile\fR can be found in the \fBEXAMPLES\fR section below.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfamily\fR\fR
 .ad
 .RS 17n
-.rt  
 The protocol family as listed in the \fB/usr/include/sys/socket.h\fR file,
 expressed as an integer.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fItype\fR\fR
 .ad
 .RS 17n
-.rt  
 The socket type as listed in the \fB/usr/include/sys/socket.h\fR file,
 expressed as an integer.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIprotocol\fR\fR
 .ad
 .RS 17n
-.rt  
 The protocol number as specified in the family-specific \fBinclude\fR file,
 expressed as an integer. For example, for \fBAF_INET\fR this number is
 specified in \fB/usr/include/netinet/in.h\fR. An unspecified protocol number is
@@ -96,12 +88,10 @@ denoted with the value zero.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fImodule\fR | \fIpath\fR\fR
 .ad
 .RS 17n
-.rt  
 The module name or path name of a device that corresponds to the transport
 provider, such as \fBtcp\fR or \fB/dev/tcp\fR. Modules must reside in
 \fBkernel/socketmod\fR. A device name must begin with \fB/dev\fR. If this
@@ -165,12 +155,10 @@ begin with a hash mark (\fB#\fR):
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/sock2path\fR\fR
 .ad
 .RS 18n
-.rt  
 File containing mappings from sockets to transport providers.
 .RE
 
diff --git a/usr/src/man/man1m/sppptun.1m b/usr/src/man/man1m/sppptun.1m
index e669afdf94..5f9bef0088 100644
--- a/usr/src/man/man1m/sppptun.1m
+++ b/usr/src/man/man1m/sppptun.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH sppptun 1M "27 May 2009" "SunOS 5.11" "System Administration Commands"
+.TH SPPPTUN 1M "May 27, 2009"
 .SH NAME
 sppptun \- PPP tunneling driver utility
 .SH SYNOPSIS
 .LP
 .nf
-\fBsppptun plumb\fR 
+\fBsppptun plumb\fR
 .fi
 
 .LP
@@ -24,7 +24,7 @@ sppptun \- PPP tunneling driver utility
 
 .LP
 .nf
-\fBsppptun query\fR 
+\fBsppptun query\fR
 .fi
 
 .SH DESCRIPTION
@@ -64,7 +64,6 @@ not need to set these values. See the examples for one possible use.
 .SH USAGE
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsppptun plumb\fR\fR
 .ad
@@ -77,7 +76,6 @@ used as the \fIprotocol\fR argument below.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsppptun plumb [\fB-s\fR \fIsap\fR] \fIprotocol\fR \fIdevice\fR\fR\fR
 .ad
@@ -99,7 +97,6 @@ in RFC 2516. The defaults are 8864 for \fBpppoe\fR and 8863 for \fBpppoed\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsppptun unplumb \fIinterface\fR\fR\fR
 .ad
@@ -112,7 +109,6 @@ name of the interface as reported when the interface was plumbed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsppptun query\fR\fR
 .ad
@@ -186,57 +182,47 @@ nge0        phys     1500   up       --
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 One or more errors occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ppp/pppoe.if\fR\fR
 .ad
 .RS 21n
-.rt  
 list of Ethernet interfaces to be plumbed at boot time
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/sbin/sppptun\fR\fR
 .ad
 .RS 21n
-.rt  
 executable command
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/sppptun\fR\fR
 .ad
 .RS 21n
-.rt  
 Solaris PPP tunneling device driver
 .RE
 
diff --git a/usr/src/man/man1m/spray.1m b/usr/src/man/man1m/spray.1m
index e081a8a8c2..2b0c228a9f 100644
--- a/usr/src/man/man1m/spray.1m
+++ b/usr/src/man/man1m/spray.1m
@@ -1,17 +1,17 @@
 '\" te
 .\" Copyright (c) 1998, Sun Microsystems,
 .\" Inc.  All Rights Reserved
-.\"  Copyright 1989 AT&T  Copyright (c) 
+.\"  Copyright 1989 AT&T  Copyright (c)
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH spray 1M "6 Nov 2000" "SunOS 5.11" "System Administration Commands"
+.TH SPRAY 1M "Nov 6, 2000"
 .SH NAME
 spray \- spray packets
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/spray\fR [\fB-c\fR \fIcount\fR] [\fB-d\fR \fIdelay\fR] [\fB-l\fR \fIlength\fR] 
+\fB/usr/sbin/spray\fR [\fB-c\fR \fIcount\fR] [\fB-d\fR \fIdelay\fR] [\fB-l\fR \fIlength\fR]
      [\fB-t\fR \fInettype\fR] \fIhost\fR
 .fi
 
@@ -31,36 +31,30 @@ get to the network medium.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcount\fR\fR
 .ad
 .RS 14n
-.rt  
 Specify how many packets to send. The default value of \fIcount\fR is the
 number of packets required to make the total stream size 100000 bytes.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdelay\fR\fR
 .ad
 .RS 14n
-.rt  
 Specify how many microseconds to pause between sending each packet. The default
 is \fB0\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlength\fR\fR
 .ad
 .RS 14n
-.rt  
 The \fIlength\fR parameter is the numbers of bytes in the Ethernet packet that
 holds the RPC call message. Since the data is encoded using XDR, and XDR only
 deals with 32 bit quantities, not all values of \fIlength\fR are possible, and
@@ -73,12 +67,10 @@ correspondence to Ethernet packet size. The default value of \fIlength\fR is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fInettype\fR\fR
 .ad
 .RS 14n
-.rt  
 Specify class of transports. Defaults to  \fBnetpath\fR. See \fBrpc\fR(3NSL)
 for a description of supported classes.
 .RE
diff --git a/usr/src/man/man1m/ssh-keysign.1m b/usr/src/man/man1m/ssh-keysign.1m
index ec458d64a7..1ab228a28a 100644
--- a/usr/src/man/man1m/ssh-keysign.1m
+++ b/usr/src/man/man1m/ssh-keysign.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ssh-keysign 1M "9 Jun 2004" "SunOS 5.11" "System Administration Commands"
+.TH SSH-KEYSIGN 1M "Jun 9, 2004"
 .SH NAME
 ssh-keysign \- ssh helper program for host-based authentication
 .SH SYNOPSIS
 .LP
 .nf
-\fBssh-keysign\fR 
+\fBssh-keysign\fR
 .fi
 
 .SH DESCRIPTION
@@ -32,18 +32,15 @@ host-based authentication.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ssh/ssh_config\fR\fR
 .ad
 .RS 29n
-.rt  
 Controls whether \fBssh-keysign\fR is enabled.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ssh/ssh_host_dsa_key\fR\fR
 .ad
@@ -52,7 +49,6 @@ Controls whether \fBssh-keysign\fR is enabled.
 \fB\fB/etc/ssh/ssh_host_rsa_key\fR\fR
 .ad
 .RS 29n
-.rt  
 These files contain the private parts of the host keys used to generate the
 digital signature. They should be owned by root, readable only by root, and not
 accessible to others. Because they are readable only by root, \fBssh-keysign\fR
@@ -94,13 +90,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/sshd.1m b/usr/src/man/man1m/sshd.1m
index 305376649d..8383f2d9bc 100644
--- a/usr/src/man/man1m/sshd.1m
+++ b/usr/src/man/man1m/sshd.1m
@@ -2,14 +2,14 @@
 .\" To view license terms, attribution, and copyright for OpenSSH, the default path is /var/sadm/pkg/SUNWsshdr/install/copyright. If the Solaris operating environment has been installed anywhere other than the default, modify the given path to access the file at the
 .\" installed location.
 .\" Portions Copyright (c) 2008, Sun Microsystems, Inc. All Rights Reserved.
-.TH sshd 1M "17 Mar 2009" "SunOS 5.11" "System Administration Commands"
+.TH SSHD 1M "Mar 17, 2009"
 .SH NAME
 sshd \- secure shell daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fBsshd\fR [\fB-deiqtD46\fR] [\fB-b\fR \fIbits\fR] [\fB-f\fR \fIconfig_file\fR] 
-     [\fB-g\fR \fIlogin_grace_time\fR] [\fB-h\fR \fIhost_key_file\fR] 
+\fBsshd\fR [\fB-deiqtD46\fR] [\fB-b\fR \fIbits\fR] [\fB-f\fR \fIconfig_file\fR]
+     [\fB-g\fR \fIlogin_grace_time\fR] [\fB-h\fR \fIhost_key_file\fR]
      [\fB-k\fR \fIkey_gen_time\fR] [\fB-p\fR \fIport\fR] [\fB-V\fR \fIclient_protocol_id\fR]
 .fi
 
@@ -127,7 +127,6 @@ package for \fBSUNWsshdu\fR, the package containing \fBsshd\fR.
 The options for \fBsshd\fR are as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR \fIbits\fR\fR
 .ad
@@ -138,7 +137,6 @@ Specifies the number of bits in the server key (the default is 768).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -152,7 +150,6 @@ server. Multiple \fB-d\fR options increase the debugging level. Maximum is 3.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
@@ -164,7 +161,6 @@ error instead of to the system log.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIconfiguration_file\fR\fR
 .ad
@@ -177,7 +173,6 @@ configuration file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR \fIlogin_grace_time\fR\fR
 .ad
@@ -190,7 +185,6 @@ seconds, the server disconnects and exits. A value of zero indicates no limit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIhost_key_file\fR\fR
 .ad
@@ -207,7 +201,6 @@ algorithms.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
@@ -223,7 +216,6 @@ reasonable.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR \fIkey_gen_time\fR\fR
 .ad
@@ -239,7 +231,6 @@ indicates that the key will never be regenerated.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIoption\fR\fR
 .ad
@@ -252,7 +243,6 @@ command-line flags.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIport\fR\fR
 .ad
@@ -264,7 +254,6 @@ Specifies the port on which the server listens for connections (the default is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
@@ -276,7 +265,6 @@ authentication, and termination of each connection is logged.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
@@ -289,7 +277,6 @@ might change.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
@@ -301,7 +288,6 @@ daemon. This allows easy monitoring of \fBsshd\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-4\fR\fR
 .ad
@@ -312,7 +298,6 @@ Forces \fBsshd\fR to use IPv4 addresses only.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-6\fR\fR
 .ad
@@ -384,7 +369,6 @@ spaces are permitted, except within double quotes. The following option
 specifications are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfrom="\fIpattern-list\fR"\fR\fR
 .ad
@@ -406,7 +390,6 @@ servers and routers would have to be compromised, in addition to just the key.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcommand="\fIcommand\fR"\fR\fR
 .ad
@@ -427,7 +410,6 @@ execution.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBenvironment="\fINAME\fR=\fIvalue\fR"\fR\fR
 .ad
@@ -442,7 +424,6 @@ the \fBPermitUserEnvironment\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBno-port-forwarding\fR\fR
 .ad
@@ -455,7 +436,6 @@ example, in connection with the \fBcommand\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBno-X11-forwarding\fR\fR
 .ad
@@ -467,7 +447,6 @@ forward requests by the client will return an error.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBno-agent-forwarding\fR\fR
 .ad
@@ -479,7 +458,6 @@ authentication.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBno-pty\fR\fR
 .ad
@@ -490,7 +468,6 @@ Prevents \fBtty\fR allocation (a request to allocate a \fBpty\fR will fail).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpermitopen="\fIhost\fR:\fIport\fR"\fR\fR
 .ad
@@ -585,7 +562,6 @@ the front.
 \fBssh\fR users:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDISPLAY\fR\fR
 .ad
@@ -603,7 +579,6 @@ cookies.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBHOME\fR\fR
 .ad
@@ -614,7 +589,6 @@ Set to the path of the user's home directory.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLANG\fR, \fBLC_ALL\fR, \fBLC_COLLATE\fR, \fBLC_CTYPE\fR,
 \fBLC_MESSAGES\fR, \fBLC_MONETARY\fR, \fBLC_NUMERIC\fR, \fBLC_TIME\fR\fR
@@ -655,7 +629,6 @@ used for setting the user environment.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLOGNAME\fR\fR
 .ad
@@ -667,7 +640,6 @@ variable.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMAIL\fR\fR
 .ad
@@ -678,7 +650,6 @@ Set to point to the user's mailbox.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSSH_AUTH_SOCK\fR\fR
 .ad
@@ -690,7 +661,6 @@ agent.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSSH_CONNECTION\fR\fR
 .ad
@@ -703,7 +673,6 @@ address and server port number.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSSH_CLIENT\fR\fR
 .ad
@@ -716,7 +685,6 @@ number.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSSH_TTY\fR\fR
 .ad
@@ -729,7 +697,6 @@ variable is not set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTZ\fR\fR
 .ad
@@ -741,7 +708,6 @@ Indicates the present timezone, if \fBTIMEZONE\fR is set in
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBHZ\fR\fR
 .ad
@@ -752,7 +718,6 @@ If set in \fB/etc/default/login\fR, the daemon sets it to the same value.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSHELL\fR\fR
 .ad
@@ -763,7 +728,6 @@ The user's shell, if \fBALTSHELL=YES\fR in \fB/etc/default/login\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPATH\fR\fR
 .ad
@@ -775,7 +739,6 @@ Set to the value of \fBPATH\fR or \fBSUPATH\fR (see \fBlogin\fR(1)) in
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBUSER\fR\fR
 .ad
@@ -864,30 +827,25 @@ closenet,closenet.hut.fi,...,130.233.208.41 ssh-rsa AA..8= closenet.hut.fi
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 13n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>\fB0\fR\fR
 .ad
 .RS 13n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/login\fR\fR
 .ad
@@ -984,7 +942,6 @@ login attempts per-connection using interactive user authentication methods
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ssh/sshd_config\fR\fR
 .ad
@@ -997,7 +954,6 @@ world-readable.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ssh/ssh_host_key\fR\fR
 .ad
@@ -1018,7 +974,6 @@ start if this file is group/world-accessible.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ssh/ssh_host_key.pub\fR\fR
 .ad
@@ -1041,7 +996,6 @@ created using \fBssh-keygen\fR(1).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/run/sshd.pid\fR\fR
 .ad
@@ -1056,7 +1010,6 @@ to specify a file other than \fB/var/run/sshd.pid\fR. See \fBsshd_config\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ssh/ssh_known_hosts\fR and \fB$HOME/.ssh/known_hosts\fR\fR
 .ad
@@ -1073,7 +1026,6 @@ world-readable.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/nologin\fR\fR
 .ad
@@ -1086,7 +1038,6 @@ connections are refused. The file should be world-readable.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB$HOME/.ssh/authorized_keys\fR\fR
 .ad
@@ -1103,7 +1054,6 @@ file, as described in \fBssh-keygen\fR(1).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB$HOME/.rhosts\fR\fR
 .ad
@@ -1120,7 +1070,6 @@ all users in the group.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB$HOME/.shosts\fR\fR
 .ad
@@ -1133,7 +1082,6 @@ access using SSH only.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/hosts.equiv\fR\fR
 .ad
@@ -1163,7 +1111,6 @@ negative entries. This warning also applies to \fBrsh\fR/\fBrlogin\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ssh/moduli\fR\fR
 .ad
@@ -1174,7 +1121,6 @@ A private file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ssh/shosts.equiv\fR\fR
 .ad
@@ -1187,7 +1133,6 @@ and \fBssh\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB$HOME/.ssh/environment\fR\fR
 .ad
@@ -1203,7 +1148,6 @@ disabled by default and is controlled by means of the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB$HOME/.ssh/rc\fR\fR
 .ad
@@ -1252,7 +1196,6 @@ writable only by the user, and need not be readable by anyone else.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ssh/sshrc\fR\fR
 .ad
@@ -1326,25 +1269,24 @@ Each SSHv2 \fBuserauth\fR type has its own PAM service name:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-SSHv2 UserauthPAM Service Name
+box;
+c | c
+l | l .
+SSHv2 Userauth	PAM Service Name
 _
-nonesshd-none
+none	sshd-none
 _
-passwordsshd-password
+password	sshd-password
 _
-keyboard-interactivesshd-kbdint
+keyboard-interactive	sshd-kbdint
 _
-pubkeysshd-pubkey
+pubkey	sshd-pubkey
 _
-hostbasedsshd-hostbased
+hostbased	sshd-hostbased
 _
-gssapi-with-micsshd-gssapi
+gssapi-with-mic	sshd-gssapi
 _
-gssapi-keyexsshd-gssapi
+gssapi-keyex	sshd-gssapi
 .TE
 
 .sp
@@ -1460,13 +1402,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/statd.1m b/usr/src/man/man1m/statd.1m
index 327675ed93..910001b00f 100644
--- a/usr/src/man/man1m/statd.1m
+++ b/usr/src/man/man1m/statd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH statd 1M "18 Nov 2004" "SunOS 5.11" "System Administration Commands"
+.TH STATD 1M "Nov 18, 2004"
 .SH NAME
 statd \- network status monitor
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/nfs/statd\fR 
+\fB/usr/lib/nfs/statd\fR
 .fi
 
 .SH DESCRIPTION
@@ -37,7 +37,6 @@ files.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/statmon/sm\fR\fR
 .ad
@@ -48,7 +47,6 @@ lists hosts and network addresses to be contacted after a reboot
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/statmon/sm.bak\fR\fR
 .ad
@@ -59,7 +57,6 @@ lists hosts and network addresses that could not be contacted after last reboot
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/statmon/state\fR\fR
 .ad
@@ -70,7 +67,6 @@ includes a number which changes during a reboot
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/include/rpcsvc/sm_inter.x\fR\fR
 .ad
diff --git a/usr/src/man/man1m/stmfadm.1m b/usr/src/man/man1m/stmfadm.1m
index 7cee21b7ab..3fe7cd31ed 100644
--- a/usr/src/man/man1m/stmfadm.1m
+++ b/usr/src/man/man1m/stmfadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH stmfadm 1M "30 Jul 2009" "SunOS 5.11" "System Administration Commands"
+.TH STMFADM 1M "Jul 30, 2009"
 .SH NAME
 stmfadm \- SCSI target mode framework command line interface
 .SH SYNOPSIS
@@ -138,7 +138,6 @@ Framework (STMF) framework. The framework and this man page use the following
 terminology:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinitiator\fR\fR
 .ad
@@ -150,7 +149,6 @@ unit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtarget\fR\fR
 .ad
@@ -161,7 +159,6 @@ A device responsible for receiving SCSI I/O commands for a logical unit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlogical unit\fR\fR
 .ad
@@ -172,7 +169,6 @@ A device within a target responsible for executing SCSI I/O commands.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlogical unit number\fR\fR
 .ad
@@ -183,7 +179,6 @@ The identifier of a logical unit within a target.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinitiator group\fR\fR
 .ad
@@ -196,7 +191,6 @@ member of more than one initiator group.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtarget group\fR\fR
 .ad
@@ -216,7 +210,6 @@ that will be used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBview\fR\fR
 .ad
@@ -262,7 +255,6 @@ to logical unit number 32 for the initiator group \fBHostA\fR.
 The \fBstmfadm\fR command supports the subcommands listed below.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadd-view\fR [\fB-n\fR, \fB--lun\fR \fIlogical-unit-number\fR \fB-t\fR,
 \fB--target-group\fR \fIgroup-name\fR \fB-h\fR, \fB--host-group\fR
@@ -283,7 +275,6 @@ name, which can be used to reference the entry in the \fBremove-view\fR and
 \fBadd-view\fR supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR, \fB--lun\fR \fIlogical-unit-number\fR\fR
 .ad
@@ -296,7 +287,6 @@ logical unit number will be assigned by the STMF framework.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR, \fB--target-group\fR \fIgroup-name\fR\fR
 .ad
@@ -309,7 +299,6 @@ unit will be available through all targets.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR, \fB-host-group\fR \fIgroup-name\fR\fR
 .ad
@@ -324,7 +313,6 @@ will be available to all initiators that log in to the STMF framework.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadd-hg-member\fR \fB-g\fR \fIgroup-name\fR \fIgroup member\fR...\fR
 .ad
@@ -382,7 +370,6 @@ A host group member cannot be a member of more than one host group.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadd-tg-member\fR \fB-g\fR \fIgroup-name\fR \fIgroup member\fR...\fR
 .ad
@@ -440,7 +427,6 @@ A target group member cannot be a member of more than one target group.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcreate-hg\fR \fIgroup-name\fR\fR
 .ad
@@ -453,7 +439,6 @@ be unique within the STMF system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcreate-lu\fR [\fB-p\fR, \fB--lu-prop\fR
 \fIlogical-unit-property\fR=\fIval\fR \fB--s\fR, \fB--size\fR \fIsize\fR]
@@ -465,7 +450,6 @@ Create a logical unit that can be registered with STMF. For the \fB-p\fR
 option, \fIlogical-unit-property\fR can be one of the following properties:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBalias\fR\fR
 .ad
@@ -477,7 +461,6 @@ default is the name of the backing store.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBblk\fR\fR
 .ad
@@ -488,7 +471,6 @@ Specifies the block size for the device. The default is 512.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBguid\fR\fR
 .ad
@@ -500,7 +482,6 @@ Extended Identifier. The default is set by the STMF to a generated value.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmeta\fR\fR
 .ad
@@ -512,7 +493,6 @@ the logical unit. There is no default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmgmt-url\fR\fR
 .ad
@@ -525,7 +505,6 @@ enclosed inside a single pair of quotation marks (\fB"\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBoui\fR\fR
 .ad
@@ -538,7 +517,6 @@ identifier (GUID). The default is \fB00144F\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpid\fR\fR
 .ad
@@ -551,7 +529,6 @@ default is \fBCOMSTAR\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBserial\fR\fR
 .ad
@@ -564,7 +541,6 @@ default value.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvid\fR\fR
 .ad
@@ -577,7 +553,6 @@ default is \fBSUN\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwcd\fR\fR
 .ad
@@ -590,7 +565,6 @@ of the backing store device specified by the \fIlu-file\fR argument.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwp\fR\fR
 .ad
@@ -604,67 +578,55 @@ For the \fB-s\fR option, \fIsize\fR is an integer followed by one of the
 following letters, to indicate a unit of size:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBk\fR\fR
 .ad
 .RS 5n
-.rt  
 kilobyte
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBm\fR\fR
 .ad
 .RS 5n
-.rt  
 megabyte
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBg\fR\fR
 .ad
 .RS 5n
-.rt  
 gigabyte
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBt\fR\fR
 .ad
 .RS 5n
-.rt  
 terabyte
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBp\fR\fR
 .ad
 .RS 5n
-.rt  
 petabyte
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBe\fR\fR
 .ad
 .RS 5n
-.rt  
 exabyte
 .RE
 
@@ -683,7 +645,6 @@ logical unit metadata, preferably 64k.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcreate-tg\fR \fIgroup-name\fR\fR
 .ad
@@ -696,7 +657,6 @@ be unique within the STMF system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelete-hg\fR \fIgroup-name\fR\fR
 .ad
@@ -707,7 +667,6 @@ Delete the host group that identified by \fIgroup-name\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelete-lu\fR \fIlu-name\fR\fR
 .ad
@@ -720,7 +679,6 @@ framework. Any existing data on the logical unit remains intact.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelete-tg\fR \fIgroup-name\fR\fR
 .ad
@@ -731,7 +689,6 @@ Delete the target group that identified by \fIgroup-name\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBimport-lu\fR \fIlu-file\fR\fR
 .ad
@@ -748,7 +705,6 @@ command must be used here.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist-hg\fR [\fB-v\fR,\fB--verbose\fR] [\fIhost-group-name\fR...]\fR
 .ad
@@ -762,7 +718,6 @@ is specified, all members within a host group are displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist-lu\fR [\fB-v\fR,\fB--verbose\fR] [\fIlu-name\fR...]\fR
 .ad
@@ -776,7 +731,6 @@ additional information about the logical unit will be displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist-target\fR [\fB-v\fR,\fB--verbose\fR] [\fItarget-name\fR...]\fR
 .ad
@@ -791,7 +745,6 @@ logged-in initiators is displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist-tg\fR [\fB-v\fR,\fB--verbose\fR] [\fItarget-group-name\fR...]\fR
 .ad
@@ -805,7 +758,6 @@ option is specified, all members within a target group are displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist-view\fR \fB--l\fR, \fB--lu-name\fR \fIlu-name\fR
 [\fIentry-name\fR...]\fR
@@ -819,7 +771,6 @@ unit will be listed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmodify-lu\fR [\fB-p\fR, \fB--lu-prop\fR
 \fIlogical-unit-property\fR=\fIval\fR \fB--s\fR, \fB--size\fR \fIsize\fR,
@@ -832,7 +783,6 @@ command. For the \fB-p\fR option, \fIlogical-unit-property\fR can be one of the
 following properties:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBalias\fR\fR
 .ad
@@ -844,7 +794,6 @@ default is the name of the backing store.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmgmt-url\fR\fR
 .ad
@@ -857,7 +806,6 @@ enclosed inside a single pair of quotation marks (\fB"\fR).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwcd\fR\fR
 .ad
@@ -870,7 +818,6 @@ of the backing store device specified by the \fIlu-file\fR argument.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwp\fR\fR
 .ad
@@ -884,67 +831,55 @@ For the \fB-s\fR option, \fIsize\fR is an integer followed by one of the
 following letters, to indicate a unit of size:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBk\fR\fR
 .ad
 .RS 5n
-.rt  
 kilobyte
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBm\fR\fR
 .ad
 .RS 5n
-.rt  
 megabyte
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBg\fR\fR
 .ad
 .RS 5n
-.rt  
 gigabyte
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBt\fR\fR
 .ad
 .RS 5n
-.rt  
 terabyte
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBp\fR\fR
 .ad
 .RS 5n
-.rt  
 petabyte
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBe\fR\fR
 .ad
 .RS 5n
-.rt  
 exabyte
 .RE
 
@@ -956,7 +891,6 @@ into the STMF.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBonline-lu\fR \fIlu-name\fR\fR
 .ad
@@ -967,7 +901,6 @@ Online a logical unit currently registered with the STMF.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBonline-target\fR \fItarget-name\fR\fR
 .ad
@@ -978,7 +911,6 @@ Online the specified target.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBoffline-lu\fR \fIlu-name\fR\fR
 .ad
@@ -989,7 +921,6 @@ Offline a logical unit currently registered with the STMF.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBoffline-target\fR \fItarget-name\fR\fR
 .ad
@@ -1000,7 +931,6 @@ Online the specified target.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist-state\fR\fR
 .ad
@@ -1011,7 +941,6 @@ Lists the operational and configuration state of the STMF.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremove-hg-member\fR \fB-g\fR \fIgroup-name\fR \fIgroup member\fR\fR
 .ad
@@ -1068,7 +997,6 @@ identifiers, the commands would be:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremove-tg-member\fR \fB-g\fR \fIgroup-name\fR \fIgroup member\fR\fR
 .ad
@@ -1125,7 +1053,6 @@ identifiers, the commands would be:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremove-view\fR \fB--l\fR, \fB--lu-name\fR \fIlu-name\fR
 \fIentry-name\fR\fR
@@ -1179,10 +1106,10 @@ entries for the specified logical unit.
 .in +2
 .nf
 # \fBstmfadm list-view -l 6000AE40C5000000000046FC4FEA001C\fR
-View Entry: 0 
+View Entry: 0
     			Host group      : host-group-a
-    			Target group   : All 
-    			LUN               : 0 
+    			Target group   : All
+    			LUN               : 0
 .fi
 .in -2
 .sp
@@ -1195,13 +1122,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/stmsboot.1m b/usr/src/man/man1m/stmsboot.1m
index 37bd733923..53c1d44dca 100644
--- a/usr/src/man/man1m/stmsboot.1m
+++ b/usr/src/man/man1m/stmsboot.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH stmsboot 1M "15 Dec 2008" "SunOS 5.11" "System Administration Commands"
+.TH STMSBOOT 1M "Dec 15, 2008"
 .SH NAME
 stmsboot \- administration program for the Solaris I/O multipathing feature
 .SH SYNOPSIS
@@ -42,7 +42,6 @@ effect.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR [ \fB-D\fR \fBfp | mpt\fR ]\fR
 .ad
@@ -59,7 +58,6 @@ ports attached using the specified driver.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR [ \fB-D\fR \fBfp | mpt\fR ]\fR
 .ad
@@ -76,7 +74,6 @@ to ports attached using the specified driver.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
@@ -91,7 +88,6 @@ updated to reflect the device name changes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR\fR
 .ad
@@ -105,7 +101,6 @@ displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIcontroller_number\fR\fR
 .ad
@@ -247,13 +242,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityObsolete
+Interface Stability	Obsolete
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/strace.1m b/usr/src/man/man1m/strace.1m
index 768a8cb21c..1ce9c65f83 100644
--- a/usr/src/man/man1m/strace.1m
+++ b/usr/src/man/man1m/strace.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH strace 1M "4 Oct 1994" "SunOS 5.11" "System Administration Commands"
+.TH STRACE 1M "Oct 4, 1994"
 .SH NAME
 strace \- print STREAMS trace messages
 .SH SYNOPSIS
@@ -34,90 +34,74 @@ The format of each trace message output is:
 <\fIsid\fR> <\fItext\fR>
 .sp
 .ne 2
-.mk
 .na
 \fB<\fIseq\fR>\fR
 .ad
 .RS 11n
-.rt  
 trace sequence number
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB<\fBtime\fR>\fR
 .ad
 .RS 11n
-.rt  
 time of message in \fIhh:mm:ss\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB<\fIticks\fR>\fR
 .ad
 .RS 11n
-.rt  
 time of message in machine ticks since boot
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB<\fIlevel\fR>\fR
 .ad
 .RS 11n
-.rt  
 tracing priority level
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB<\fIflags\fR>\fR
 .ad
 .RS 11n
-.rt  
 E : message is also in the error log F : indicates a fatal error N : mail was
 sent to the system administrator (hardcoded as root)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB<\fImid\fR>\fR
 .ad
 .RS 11n
-.rt  
 module  \fBID\fR number of source
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB<\fIsid\fR>\fR
 .ad
 .RS 11n
-.rt  
 sub-ID number of source
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB<\fItext\fR>\fR
 .ad
 .RS 11n
-.rt  
 formatted text of the trace message
 .RE
 
diff --git a/usr/src/man/man1m/strclean.1m b/usr/src/man/man1m/strclean.1m
index 3f5aca4c95..56fba8ed46 100644
--- a/usr/src/man/man1m/strclean.1m
+++ b/usr/src/man/man1m/strclean.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH strclean 1M "14 Sep 1992" "SunOS 5.11" "System Administration Commands"
+.TH STRCLEAN 1M "Sep 14, 1992"
 .SH NAME
 strclean \- STREAMS error logger cleanup program
 .SH SYNOPSIS
@@ -25,24 +25,20 @@ modified in the last three days are removed.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIage\fR\fR
 .ad
 .RS 13n
-.rt  
 The maximum age in days for a log file can be changed using the \fB-a\fR
 option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIlogdir\fR\fR
 .ad
 .RS 13n
-.rt  
 A directory other than \fB/var/adm/streams\fR can be specified using the
 \fB-d\fR option.
 .RE
diff --git a/usr/src/man/man1m/strerr.1m b/usr/src/man/man1m/strerr.1m
index 478bc3d820..da8e7fc323 100644
--- a/usr/src/man/man1m/strerr.1m
+++ b/usr/src/man/man1m/strerr.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH strerr 1M "4 Oct 1994" "SunOS 5.11" "System Administration Commands"
+.TH STRERR 1M "Oct 4, 1994"
 .SH NAME
 strerr \- STREAMS error logger daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fBstrerr\fR 
+\fBstrerr\fR
 .fi
 
 .SH DESCRIPTION
@@ -29,79 +29,65 @@ The format of an error log message is:
 <\fItext\fR>
 .sp
 .ne 2
-.mk
 .na
 \fB<\fIseq\fR>\fR
 .ad
 .RS 11n
-.rt  
 error sequence number
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB<\fBtime\fR>\fR
 .ad
 .RS 11n
-.rt  
 time of message in hh:mm:ss
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB<\fIticks\fR>\fR
 .ad
 .RS 11n
-.rt  
 time of message in machine ticks since boot priority level
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB<\fIflags\fR>\fR
 .ad
 .RS 11n
-.rt  
 \fBT\fR : the message was also sent to a tracing process \fBF\fR : indicates a
 fatal error \fBN\fR : send mail to the system administrator (hardcoded as root)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB<\fImid\fR>\fR
 .ad
 .RS 11n
-.rt  
 module  \fBID\fR number of source
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB<\fIsid\fR>\fR
 .ad
 .RS 11n
-.rt  
 sub-ID number of source
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB<\fItext\fR>\fR
 .ad
 .RS 11n
-.rt  
 formatted text of the error message
 .RE
 
@@ -122,7 +108,6 @@ It is commonly executed asynchronously.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/streams/error.\fR\fImm\fR\fB-\fR\fBdd\fR\fR
 .ad
diff --git a/usr/src/man/man1m/sttydefs.1m b/usr/src/man/man1m/sttydefs.1m
index fbd98f86c7..2c01031971 100644
--- a/usr/src/man/man1m/sttydefs.1m
+++ b/usr/src/man/man1m/sttydefs.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH sttydefs 1M "14 Sep 1992" "SunOS 5.11" "System Administration Commands"
+.TH STTYDEFS 1M "Sep 14, 1992"
 .SH NAME
 sttydefs \- maintain line settings and hunt sequences for TTY ports
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/sttydefs\fR \fB-a\fR \fIttylabel\fR [\fB-b\fR] [\fB-f\fR \fIfinal-flags\fR] 
+\fB/usr/sbin/sttydefs\fR \fB-a\fR \fIttylabel\fR [\fB-b\fR] [\fB-f\fR \fIfinal-flags\fR]
      [\fB-i\fR \fIinitial-flags\fR] [\fB-n\fR \fInextlabel\fR]
 .fi
 
@@ -40,12 +40,10 @@ system.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIttylabel\fR\fR
 .ad
 .RS 20n
-.rt  
 Add a record to the \fBttydefs\fR file, using \fIttylabel\fR as its label. The
 following describes the effect of the \fB-b\fR, \fB-n\fR, \fB-i\fR, or \fB-f\fR
 options when used in conjunction with the \fB-a\fR option:
@@ -53,12 +51,10 @@ options when used in conjunction with the \fB-a\fR option:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR\fR
 .ad
 .RS 20n
-.rt  
 Enable autobaud. Autobaud allows the system to set the line speed of a given
 TTY port to the line speed of the device connected to the port without the
 user's intervention.
@@ -66,12 +62,10 @@ user's intervention.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfinal-flags\fR\fR
 .ad
 .RS 20n
-.rt  
 Specify the value to be used in the \fIfinal-flags\fR field in
 \fB/etc/ttydefs\fR. \fIfinal-flags\fR must be in a format recognized by the
 \fBstty\fR command. \fIfinal-flags\fR are the \fBtermio\fR(7I) settings used by
@@ -83,12 +77,10 @@ before invoking the service on the port. If this option is not specified,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIinitial-flags\fR\fR
 .ad
 .RS 20n
-.rt  
 Specify the value to be used in the \fIinitial-flags\fR field in
 \fB/etc/ttydefs\fR. \fIinitial-flags\fR must be in a format recognized by the
 \fBstty\fR command. These flags are used by \fBttymon\fR when searching for the
@@ -99,12 +91,10 @@ not specified, \fBsttydefs\fR will set \fIinitial-flags\fR equal to the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fInextlabel\fR\fR
 .ad
 .RS 20n
-.rt  
 Specify the value to be used in the \fInextlabel\fR field in
 \fB/etc/ttydefs\fR. If this option is not specified, \fBsttydefs\fR will set
 \fInextlabel\fR equal to \fIttylabel\fR.
@@ -112,12 +102,10 @@ Specify the value to be used in the \fInextlabel\fR field in
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR[\fIttylabel\fR]\fR
 .ad
 .RS 20n
-.rt  
 If a \fIttylabel\fR is specified, \fBsttydefs\fR displays the record from
 \fB/etc/ttydefs\fR whose TTY label matches the specified \fIttylabel\fR. If no
 \fIttylabel\fR is specified, \fBsttydefs\fR displays the entire contents of
@@ -127,12 +115,10 @@ correct and that the entry's \fInextlabel\fR field references an existing
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIttylabel\fR\fR
 .ad
 .RS 20n
-.rt  
 Remove any record in the \fBttydefs\fR file  that has \fIttylabel\fR as its
 label.
 .RE
diff --git a/usr/src/man/man1m/su.1m b/usr/src/man/man1m/su.1m
index f9f97cd931..460feede17 100644
--- a/usr/src/man/man1m/su.1m
+++ b/usr/src/man/man1m/su.1m
@@ -1,11 +1,11 @@
 '\" te
-.\" Copyright 1989 AT&T 
+.\" Copyright 1989 AT&T
 .\" Copyright (C) 2004, Sun Microsystems, Inc.
 .\" All Rights Reserved.
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH su 1M "26 Feb 2004" "SunOS 5.11" "System Administration Commands"
+.TH SU 1M "Feb 26, 2004"
 .SH NAME
 su \- become superuser or another user
 .SH SYNOPSIS
@@ -148,12 +148,10 @@ none of the above variables are set in the environment, the "C" (U.S. style)
 locale determines how \fBsu\fR behaves.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLC_CTYPE\fR\fR
 .ad
 .RS 15n
-.rt  
 Determines how \fBsu\fR handles characters. When \fBLC_CTYPE\fR is set to a
 valid value, \fBsu\fR can display and handle text and filenames containing
 valid characters for that locale. \fBsu\fR can display and handle Extended Unix
@@ -165,12 +163,10 @@ from ISO 8859-1 are valid.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLC_MESSAGES\fR\fR
 .ad
 .RS 15n
-.rt  
 Determines how diagnostic and informative messages are presented. This includes
 the language and style of the messages, and the correct form of affirmative and
 negative responses. In the "C" locale, the messages are presented in the
@@ -180,111 +176,91 @@ default form found in the program itself (in most cases, U.S. English).
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB$\fR\fBHOME\fR\fB/.profile\fR\fR
 .ad
 .RS 22n
-.rt  
 user's login commands for \fBsh\fR and \fBksh\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/passwd\fR\fR
 .ad
 .RS 22n
-.rt  
 system's password file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/profile\fR\fR
 .ad
 .RS 22n
-.rt  
 system-wide \fBsh\fR and \fBksh\fR login commands
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/sulog\fR\fR
 .ad
 .RS 22n
-.rt  
 log file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/su\fR\fR
 .ad
 .RS 22n
-.rt  
 the default parameters in this file are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSULOG\fR\fR
 .ad
 .RS 11n
-.rt  
 If defined, all attempts to \fBsu\fR to another user are logged in the
 indicated file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBCONSOLE\fR\fR
 .ad
 .RS 11n
-.rt  
 If defined, all attempts to \fBsu\fR to \fBroot\fR are logged on the console.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBPATH\fR\fR
 .ad
 .RS 11n
-.rt  
 Default path. (\fB/usr/bin:\fR)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSU\fR\fBPATH\fR\fR
 .ad
 .RS 11n
-.rt  
 Default path for a user invoking \fBsu\fR to \fBroot\fR.
 (\fB/usr/sbin:/usr/bin\fR)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSYSLOG\fR\fR
 .ad
 .RS 11n
-.rt  
 Determines whether the \fBsyslog\fR(3C) \fBLOG_AUTH\fR facility should be used
 to log all \fBsu\fR attempts. \fBLOG_NOTICE\fR messages are generated for
 \fBsu\fR's to root, \fBLOG_INFO\fR messages are generated for \fBsu\fR's to
@@ -296,21 +272,17 @@ attempts.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/login\fR\fR
 .ad
 .RS 22n
-.rt  
 the default parameters in this file are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTIMEZONE\fR\fR
 .ad
 .RS 12n
-.rt  
 Sets the TZ environment variable of the shell.
 .RE
 
diff --git a/usr/src/man/man1m/sulogin.1m b/usr/src/man/man1m/sulogin.1m
index 2e307efb15..d42f09a264 100644
--- a/usr/src/man/man1m/sulogin.1m
+++ b/usr/src/man/man1m/sulogin.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH sulogin 1M "21 Aug 2008" "SunOS 5.11" "System Administration Commands"
+.TH SULOGIN 1M "Aug 21, 2008"
 .SH NAME
 sulogin \- access single-user mode
 .SH SYNOPSIS
 .LP
 .nf
-\fBsulogin\fR 
+\fBsulogin\fR
 .fi
 
 .SH DESCRIPTION
@@ -30,7 +30,6 @@ how to configure a serial device to display the single-user login prompt.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/sulogin\fR\fR
 .ad
@@ -39,7 +38,6 @@ how to configure a serial device to display the single-user login prompt.
 Default value can be set for the following flag:
 .sp
 .ne 2
-.mk
 .na
 \fBPASSREQ\fR
 .ad
@@ -52,7 +50,6 @@ Determines if login requires a password. Default is \fBPASSREQ=YES\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/login\fR\fR
 .ad
@@ -61,7 +58,6 @@ Determines if login requires a password. Default is \fBPASSREQ=YES\fR.
 Default value can be set for the following flag:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSLEEPTIME\fR\fR
 .ad
diff --git a/usr/src/man/man1m/svadm.1m b/usr/src/man/man1m/svadm.1m
index 4beef2017f..1f923fc99d 100644
--- a/usr/src/man/man1m/svadm.1m
+++ b/usr/src/man/man1m/svadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH svadm 1M "2 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH SVADM 1M "Oct 2, 2007"
 .SH NAME
 svadm \- command line interface to control Availability Suite Storage Volume
 operations
@@ -57,7 +57,6 @@ list of volumes currently under SV control. \fBsvadm\fR supports the following
 options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR \fItag\fR\fR
 .ad
@@ -72,7 +71,6 @@ to other nodes in the cluster.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -85,7 +83,6 @@ in this cluster disk group.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
@@ -99,7 +96,6 @@ should be in this cluster disk group.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIconfig_file\fR\fR
 .ad
@@ -113,7 +109,6 @@ lines and lines starting with the comment character (#) are ignored.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -124,7 +119,6 @@ Displays the \fBsvadm\fR usage summary.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
@@ -135,7 +129,6 @@ Displays extended status for the volumes currently under SV control.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -151,7 +144,6 @@ to reconfigure the cluster tag associated with the volume. The \fB-e\fR or
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -180,13 +172,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/svc.configd.1m b/usr/src/man/man1m/svc.configd.1m
index 88264eeba1..0539abe7dd 100644
--- a/usr/src/man/man1m/svc.configd.1m
+++ b/usr/src/man/man1m/svc.configd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH svc.configd 1M "27 Oct 2004" "SunOS 5.11" "System Administration Commands"
+.TH SVC.CONFIGD 1M "Oct 27, 2004"
 .SH NAME
 svc.configd \- Service Management Facility repository daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fB/lib/svc/bin/svc.configd\fR 
+\fB/lib/svc/bin/svc.configd\fR
 .fi
 
 .SH DESCRIPTION
diff --git a/usr/src/man/man1m/svc.ipfd.1m b/usr/src/man/man1m/svc.ipfd.1m
index df2cb194ac..58b8ffb151 100644
--- a/usr/src/man/man1m/svc.ipfd.1m
+++ b/usr/src/man/man1m/svc.ipfd.1m
@@ -2,7 +2,7 @@
 .\" To view license terms, attribution, and copyright for IP Filter, the default path is /usr/lib/ipf/IPFILTER.LICENCE. If the Solaris operating environment has been installed anywhere other than the default, modify the given path to access the file at the installed
 .\" location.
 .\" Copyright (c) 2009, Sun Microsystems, Inc. All Rights Reserved
-.TH svc.ipfd 1M "13 Jan 2009" "SunOS 5.11" "System Administration Commands"
+.TH SVC.IPFD 1M "Jan 13, 2009"
 .SH NAME
 svc.ipfd \- IP Filter firewall monitoring daemon
 .SH SYNOPSIS
@@ -46,7 +46,6 @@ similar to the \fBinetd\fR property group in \fBinetd\fR managed services. This
 property group supports:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfirewall_context/name\fR\fR
 .ad
@@ -58,7 +57,6 @@ For non-\fBinetd\fR services. The IANA name or RPC name, equivalent to the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfirewall_context/isrpc\fR\fR
 .ad
@@ -77,7 +75,6 @@ their own IPF rules. An optional property \fBipf_method\fR, provides a
 mechanism to allow such custom rule generation:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfirewall_context/ipf_method\fR\fR
 .ad
@@ -119,7 +116,6 @@ store the respective system-wide policies.
 Below are the properties, their possible values, and corresponding semantics:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpolicy\fR\fR
 .ad
@@ -128,7 +124,6 @@ Below are the properties, their possible values, and corresponding semantics:
 The \fBpolicy\fR has the following modes:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnone\fR policy mode\fR
 .ad
@@ -141,7 +136,6 @@ service.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdeny\fR policy mode\fR
 .ad
@@ -153,7 +147,6 @@ sources except those specified in the \fBapply_to\fR property.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBallow\fR policy mode\fR
 .ad
@@ -167,7 +160,6 @@ except those specified in the \fBapply_to\fR property.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBapply_to\fR\fR
 .ad
@@ -192,7 +184,6 @@ interface:      if:\fIinterface_name\fR       "if:e1000g0"
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBexceptions\fR\fR
 .ad
@@ -210,7 +201,6 @@ in the \fBexceptions\fR property. This property has the same value syntax as
 For individual network services only:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfirewall_config/policy\fR\fR
 .ad
@@ -225,7 +215,6 @@ A service's policy can also be set to \fBuse_global\fR. Services with
 For the Global Default only:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfirewall_config_default/policy\fR\fR
 .ad
@@ -244,7 +233,6 @@ firewall policies.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfirewall_config_default/custom_policy_file\fR\fR
 .ad
@@ -301,7 +289,6 @@ Refresh configuration:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfirewall_config_default/open_ports\fR\fR
 .ad
@@ -380,7 +367,6 @@ groups and properties and their appropriate default values.
 Firewall policy configuration:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfirewall_config\fR\fR
 .ad
@@ -407,7 +393,6 @@ See "Firewall Policy Configuration," above, for more information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfirewall_config/policy\fR\fR
 .ad
@@ -419,7 +404,6 @@ default, inherit the Global Default firewall policy.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfirewall_config/apply_to\fR\fR
 .ad
@@ -430,7 +414,6 @@ An empty property, this property has no initial value.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfirewall_config/exceptions\fR\fR
 .ad
@@ -444,7 +427,6 @@ An empty property, this property has no initial value.
 Firewall static definition:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfirewall_context\fR\fR
 .ad
@@ -459,7 +441,6 @@ See "Firewall Static Configuration," above, for more information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfirewall_context/name\fR\fR
 .ad
@@ -472,7 +453,6 @@ property. For RPC services, the RPC program number is stored in this property.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfirewall_context/isrpc\fR\fR
 .ad
@@ -484,7 +464,6 @@ For RPC services, this property should be created with its value set to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfirewall_context/ipf_method\fR\fR
 .ad
@@ -518,13 +497,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/svc.startd.1m b/usr/src/man/man1m/svc.startd.1m
index 1f8a7c3936..726e556de1 100644
--- a/usr/src/man/man1m/svc.startd.1m
+++ b/usr/src/man/man1m/svc.startd.1m
@@ -1,21 +1,21 @@
 '\" te
 .\" Copyright (c) 2008, Sun Microsystems, Inc. All Rights Reserved.
-.\" Copyright 2011, Joyent Inc 
+.\" Copyright 2011, Joyent Inc
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH svc.startd 1M "18 Mar 2011" "SunOS 5.11" "System Administration Commands"
+.TH SVC.STARTD 1M "Mar 18, 2011"
 .SH NAME
 svc.startd \- Service Management Facility master restarter
 .SH SYNOPSIS
 .LP
 .nf
-\fB/lib/svc/bin/svc.startd\fR 
+\fB/lib/svc/bin/svc.startd\fR
 .fi
 
 .LP
 .nf
-\fBsvc:/system/svc/restarter:default\fR 
+\fBsvc:/system/svc/restarter:default\fR
 .fi
 
 .SH DESCRIPTION
@@ -70,7 +70,6 @@ The following configuration variables in the \fBoptions\fR property group are
 available to developers and administrators:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBboot_messages\fR\fR
 .ad
@@ -88,7 +87,6 @@ service started to indicate success or failure. You can use the \fBboot\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlogging\fR\fR
 .ad
@@ -114,7 +112,6 @@ global logfile, and a single message per service started to the console.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmilestone\fR\fR
 .ad
@@ -143,7 +140,6 @@ property is specified, it overrides any \fBinitdefault\fR setting in
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsystem/reconfigure\fR\fR
 .ad
@@ -180,7 +176,6 @@ to take action based on service instance health. The \fBsvcs\fR(1) command can
 be used to easily display these properties.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrestarter/state\fR\fR
 .ad
@@ -195,7 +190,6 @@ The current and next (if currently in transition) state for an instance.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrestarter/auxiliary_state\fR\fR
 .ad
@@ -205,12 +199,10 @@ A caption detailing additional information about the current instance state.
 The auxiliary state available for services managed by \fBsvc.startd\fR is:
 .sp
 .ne 2
-.mk
 .na
 \fBmaintenance\fR
 .ad
 .RS 15n
-.rt  
 .sp
 .in +2
 .nf
@@ -227,7 +219,6 @@ administrative_request
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrestarter/state_timestamp\fR\fR
 .ad
@@ -238,7 +229,6 @@ The time when the current state was reached.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrestarter/contract\fR\fR
 .ad
@@ -274,12 +264,10 @@ The general form of methods for the fork/exec model provided by
 are supported as required or optional by services managed by \fBsvc.startd\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrefresh\fR\fR
 .ad
 .RS 11n
-.rt  
 Reload any appropriate configuration parameters from the repository or
 \fBconfig\fR file, without interrupting service. This is often implemented
 using \fBSIGHUP\fR for system daemons. If the service is unable to recognize
@@ -290,12 +278,10 @@ This method is optional.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstart\fR\fR
 .ad
 .RS 11n
-.rt  
 Start the service. Return success only after the application is available to
 consumers. Fail if a conflicting instance is already running, or if the service
 is unable to start.
@@ -305,12 +291,10 @@ This method is required.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstop\fR\fR
 .ad
 .RS 11n
-.rt  
 Stop the service. In some cases, the stop method can be invoked when some or
 all of the service has already been stopped. Only return an error if the
 service is not entirely stopped on method return.
@@ -337,7 +321,6 @@ specific way in which these general properties interacts with \fBsvc.startd\fR
 follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgeneral/enabled\fR\fR
 .ad
@@ -350,7 +333,6 @@ disabled state, not running.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgeneral/restarter\fR\fR
 .ad
@@ -364,7 +346,6 @@ available) for managing the service.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgeneral/single_instance\fR\fR
 .ad
@@ -380,9 +361,8 @@ Additionally, \fBsvc.startd\fR managed services can define the optional
 properties listed below in the \fBstartd\fR property group.
 .sp
 .ne 2
-.mk
 .na
-\fB\fBstartd/critical_failure_count\fR 
+\fB\fBstartd/critical_failure_count\fR
 .ad
 .br
 .na
@@ -400,7 +380,6 @@ service to maintenance.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstartd/duration\fR\fR
 .ad
@@ -413,7 +392,6 @@ The \fBduration\fR property defines the service's model. It can be set to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstartd/ignore_error\fR\fR
 .ad
@@ -426,7 +404,6 @@ ignored events. Legitimate string values in that list are \fBcore\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstartd/need_session\fR\fR
 .ad
@@ -438,7 +415,6 @@ should be launched in its own session. The default is not to do so.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstartd/utmpx_prefix\fR\fR
 .ad
@@ -527,7 +503,6 @@ numbers.
 The milestone to run-level mapping is:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmilestone/single-user\fR\fR
 .ad
@@ -538,7 +513,6 @@ Single-user (\fBS\fR)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmilestone/multi-user\fR\fR
 .ad
@@ -549,7 +523,6 @@ Multi-user (\fB2\fR)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmilestone/multi-user-server\fR\fR
 .ad
@@ -569,23 +542,19 @@ captured as a convenience for the administrator.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/svc/log\fR\fR
 .ad
 .RS 21n
-.rt  
 Directory where \fBsvc.startd\fR stores log files.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/svc/volatile\fR\fR
 .ad
 .RS 21n
-.rt  
 Directory where \fBsvc.startd\fR stores log files in early stages of boot,
 before \fB/var\fR is mounted read-write.
 .RE
diff --git a/usr/src/man/man1m/svcadm.1m b/usr/src/man/man1m/svcadm.1m
index fa0fd8c5d5..ca66d739a4 100644
--- a/usr/src/man/man1m/svcadm.1m
+++ b/usr/src/man/man1m/svcadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH svcadm 1M "9 May 2008" "SunOS 5.11" "System Administration Commands"
+.TH SVCADM 1M "May 9, 2008"
 .SH NAME
 svcadm \- manipulate service instances
 .SH SYNOPSIS
@@ -34,13 +34,13 @@ svcadm \- manipulate service instances
 
 .LP
 .nf
-\fB/usr/sbin/svcadm\fR [\fB-v\fR] [\fB-z\fR \fIzone\fR] mark [\fB-It\fR] \fIinstance_state\fR 
+\fB/usr/sbin/svcadm\fR [\fB-v\fR] [\fB-z\fR \fIzone\fR] mark [\fB-It\fR] \fIinstance_state\fR
      {\fIFMRI\fR | \fIpattern\fR}...
 .fi
 
 .LP
 .nf
-\fB/usr/sbin/svcadm\fR [\fB-v\fR] milestone [\fB-d\fR] \fImilestone_FMRI\fR 
+\fB/usr/sbin/svcadm\fR [\fB-v\fR] milestone [\fB-d\fR] \fImilestone_FMRI\fR
 .fi
 
 .SH DESCRIPTION
@@ -56,23 +56,19 @@ restarter is \fBsvc.startd\fR (see \fBsvc.startd\fR(1M)).
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 20n
-.rt  
 Print actions verbosely to standard output.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB-z\fR \fIzone\fR
 .ad
 .RS 20n
-.rt
 Administer services in the specified zone.  This option is only applicable
 from the global zone, see \fBzones\fR(5).
 .RE
@@ -96,7 +92,6 @@ In the case that the service has more than one instance, \fBsvcadm\fR return a
 non-zero exit status.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBenable\fR \fB[\fR\fB-rst\fR\fB]\fR {\fIFMRI\fR | \fIpattern\fR}. . .\fR
 .ad
@@ -124,7 +119,6 @@ persistent across reboot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisable\fR [\fB-st\fR] {\fIFMRI\fR | \fIpattern\fR}. . .\fR
 .ad
@@ -149,7 +143,6 @@ persistent across reboot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrestart\fR {\fIFMRI\fR | \fIpattern\fR}. . .\fR
 .ad
@@ -165,7 +158,6 @@ degraded states, as those states are defined in \fBsmf\fR(5).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrefresh\fR {\fIFMRI\fR | \fIpattern\fR}. . .\fR
 .ad
@@ -188,7 +180,6 @@ group of the service instance (see \fBsmf_security\fR(5)).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBclear\fR {\fIFMRI\fR | \fIpattern\fR}. . .\fR
 .ad
@@ -209,7 +200,6 @@ The following subcommands are used for service development and temporary
 administrative manipulation.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmark [\fR\fB-It\fR\fB]\fR \fIinstance_state\fR {\fIFMRI\fR |
 \fIpattern\fR}. . .\fR
@@ -235,7 +225,6 @@ until the next reboot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmilestone\fR [\fB-d\fR] \fImilestone_FMRI\fR\fR
 .ad
@@ -287,12 +276,10 @@ group of the \fBsvc:/system/svc/restarter:default\fR service instance (see
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIFMRI\fR\fR
 .ad
 .RS 11n
-.rt  
 An \fIFMRI\fR that specifies one or more instances. \fIFMRI\fRs can be
 abbreviated by specifying the instance name, or the trailing portion of the
 service name. For example, given the \fIFMRI\fR:
@@ -308,10 +295,10 @@ All the following are valid abbreviations:
 .sp
 .in +2
 .nf
-sendmail 
-:sendmail 
-smtp 
-smtp:sendmail 
+sendmail
+:sendmail
+smtp
+smtp:sendmail
 network/smtp
 .fi
 .in -2
@@ -335,12 +322,10 @@ should not be used in scripts or other permanent tools.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpattern\fR\fR
 .ad
 .RS 11n
-.rt  
 A pattern that is matched against the \fIFMRIs\fR of service instances
 according to the "globbing" rules described by \fBfnmatch\fR(5). If the pattern
 does not begin with "svc:", then "svc:/" is prepended.
@@ -448,46 +433,38 @@ The following command restores the running services:
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 A fatal error occurred. One or more error messages are displayed on standard
 error.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Invalid command line options were specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 5n
-.rt  
 \fBsvcadm\fR determined that a service instance that it was waiting for could
 not reach the desired state without administrator intervention due to a problem
 with the service instance itself.
@@ -495,12 +472,10 @@ with the service instance itself.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR\fR
 .ad
 .RS 5n
-.rt  
 \fBsvcadm\fR determined that a service instance that it was waiting for could
 not reach the desired state without administrator intervention due to a problem
 with the service's dependencies.
@@ -514,13 +489,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/svccfg.1m b/usr/src/man/man1m/svccfg.1m
index 99447a7965..972967267b 100644
--- a/usr/src/man/man1m/svccfg.1m
+++ b/usr/src/man/man1m/svccfg.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH svccfg 1M "29 Jun 2009" "SunOS 5.11" "System Administration Commands"
+.TH SVCCFG 1M "Jun 29, 2009"
 .SH NAME
 svccfg \- import, export, and modify service configurations
 .SH SYNOPSIS
@@ -41,7 +41,6 @@ details.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIcommand-file\fR\fR
 .ad
@@ -52,7 +51,6 @@ Reads and executes \fBsvccfg\fR subcommands from \fIcommand-file\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIFMRI\fR\fR
 .ad
@@ -64,7 +62,6 @@ identifier) before executing any subcommands. See \fBsmf\fR(5).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -98,10 +95,10 @@ All the following are valid abbreviations:
 .sp
 .in +2
 .nf
-sendmail 
-:sendmail 
-smtp 
-smtp:sendmail 
+sendmail
+:sendmail
+smtp
+smtp:sendmail
 network/smtp
 .fi
 .in -2
@@ -128,7 +125,6 @@ or service, an error message is printed and no action is taken.
 .SS "General Subcommands"
 .sp
 .ne 2
-.mk
 .na
 \fB\fBend\fR\fR
 .ad
@@ -147,7 +143,6 @@ Exits immediately.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrepository\fR \fIrepfile\fR\fR
 .ad
@@ -163,7 +158,6 @@ system repository, \fB/etc/svc/repository.db\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBset\fR [\fB-v\fR|\fB-V\fR]\fR
 .ad
@@ -173,7 +167,6 @@ Sets optional behavior. If no options are specified, set displays the options
 currently in effect.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -184,7 +177,6 @@ Turns on verbose mode.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
@@ -198,7 +190,6 @@ Turns off verbose mode.
 .SS "Service Profile Subcommands"
 .sp
 .ne 2
-.mk
 .na
 \fB\fBapply\fR [\fB-n\fR] \fIfile\fR\fR
 .ad
@@ -222,7 +213,6 @@ fails.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBextract\fR [\fI> file\fR]\fR
 .ad
@@ -236,7 +226,6 @@ a file.
 .SS "Service Manifest Subcommands"
 .sp
 .ne 2
-.mk
 .na
 \fB\fBarchive\fR [\fB-a\fR]\fR
 .ad
@@ -256,7 +245,6 @@ there are insufficient privileges to read these values.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBexport\fR [\fB-a\fR] \fIservice_FMRI\fR [\fI>file\fR]\fR
 .ad
@@ -280,7 +268,6 @@ specifies an instance), the command fails.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBimport\fR [\fB-V\fR] \fIfile\fR\fR
 .ad
@@ -309,7 +296,6 @@ they represent administrator preference.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinventory\fR \fIfile\fR\fR
 .ad
@@ -323,7 +309,6 @@ of the service.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrestore\fR\fR
 .ad
@@ -345,7 +330,6 @@ the archive was made.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvalidate\fR [\fIfile\fR | \fIfmri\fR]\fR
 .ad
@@ -378,7 +362,6 @@ See \fBsmf_template\fR(5) for a description of templates.
 An "entity" refers to a scope, service, or service instance.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadd\fR \fIname\fR\fR
 .ad
@@ -391,7 +374,6 @@ entities.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelete\fR [\fB-f\fR] \fB{\fIname\fR | \fIfmri\fR}\fR\fR
 .ad
@@ -410,7 +392,6 @@ to delete service configurations.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist\fR [\fIpattern\fR]\fR
 .ad
@@ -423,7 +404,6 @@ listed for property-bearing entities, namely services and service instances.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBselect\fR {\fIname\fR | \fIfmri\fR}\fR
 .ad
@@ -436,7 +416,6 @@ entity that the argument specifies becomes the current selection.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunselect\fR\fR
 .ad
@@ -448,7 +427,6 @@ The parent of the current selection becomes the current selection.
 .SS "Property Inspection and Modification Subcommands"
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaddpg\fR \fIname\fR \fItype\fR [\fIflags\fR]\fR
 .ad
@@ -463,7 +441,6 @@ with which to create the property group. 'P' represents
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaddpropvalue\fR \fIpg\fR\fI/name\fR [\fItype:\fR] \fIvalue\fR\fR
 .ad
@@ -483,7 +460,6 @@ values associated with the property.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelpg\fR \fIname\fR\fR
 .ad
@@ -495,7 +471,6 @@ Deletes the property group \fIname\fR of the current selection. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelprop\fR \fIpg\fR[\fI/name\fR]\fR
 .ad
@@ -507,7 +482,6 @@ Deletes the named property group or property of the current selection. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelpropvalue\fR \fIpg/name\fR \fIglobpattern\fR\fR
 .ad
@@ -520,7 +494,6 @@ required to modify properties.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdescribe\fR [\fB-v\fR] [\fB-t\fR] [\fIpropertygroup\fR/\fIproperty\fR]\fR
 .ad
@@ -544,7 +517,6 @@ groups and properties.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBeditprop\fR\fR
 .ad
@@ -560,7 +532,6 @@ delete properties.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlistpg\fR [\fIpattern\fR]\fR
 .ad
@@ -575,7 +546,6 @@ In interactive mode, a basic description of the property groups is also given.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlistprop\fR [\fIpattern\fR]\fR
 .ad
@@ -591,7 +561,6 @@ properties with names which match the argument are listed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsetenv\fR [\fB-i\fR | \fB-s\fR] [\fB-m\fR \fImethod_name\fR] \fIenvvar
 value\fR\fR
@@ -599,7 +568,7 @@ value\fR\fR
 .sp .6
 .RS 4n
 Sets a method environment variable for a service or instance by changing the
-"environment" property in the \fImethod_name\fR property 	group, if that
+"environment" property in the \fImethod_name\fR property group, if that
 property group has type "method". If \fImethod_name\fR is not specified and the
 \fB-i\fR option is used, the "method_context" property group is used, if an
 instance is currently selected. If the \fB-s\fR option is used and a service is
@@ -618,7 +587,6 @@ by a "=" are removed, and the value "\fIenvvar\fR=\fIvalue\fR" is added. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsetprop\fR \fIpg/name\fR = [\fItype:\fR] \fIvalue\fR\fR
 .ad
@@ -643,7 +611,6 @@ order in which they are specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunsetenv\fR [\fB-i\fR | \fB-s\fR] [\fB-m\fR \fImethod_name\fR] \fIenvvar
 value\fR\fR
@@ -651,7 +618,7 @@ value\fR\fR
 .sp .6
 .RS 4n
 Removes a method environment variable for a service or instance by changing the
-"environment" property in the \fImethod_name\fR property 	group, if that
+"environment" property in the \fImethod_name\fR property group, if that
 property group has type "method". If \fImethod_name\fR is not specified and the
 \fB-i\fR option is used, the "method_context" property group is used, if an
 instance is currently selected. If the \fB-s\fR option is used and a service is
@@ -671,7 +638,6 @@ modify properties.
 .SS "Snapshot Navigation and Selection Subcommands"
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlistsnap\fR\fR
 .ad
@@ -682,7 +648,6 @@ Displays snapshots available for the currently selected instance.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrevert\fR [\fIsnapshot\fR]\fR
 .ad
@@ -697,7 +662,6 @@ See \fBsmf_security\fR(5) for the privileges required to change properties.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBselectsnap\fR [\fIname\fR]\fR
 .ad
@@ -711,7 +675,6 @@ read-only.
 .SS "Instance Subcommands"
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrefresh\fR\fR
 .ad
@@ -833,7 +796,6 @@ ttymon/label                astring  console
 .SH ENVIRONMENTAL VARIABLES
 .sp
 .ne 2
-.mk
 .na
 \fBEDITOR\fR
 .ad
@@ -849,7 +811,6 @@ editor is \fBvi\fR(1).
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -860,7 +821,6 @@ Successful execution.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
@@ -872,7 +832,6 @@ standard error stream.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
@@ -889,13 +848,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/swap.1m b/usr/src/man/man1m/swap.1m
index 865f513540..b0fb586f59 100644
--- a/usr/src/man/man1m/swap.1m
+++ b/usr/src/man/man1m/swap.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH swap 1M "11 Apr 2008" "SunOS 5.11" "System Administration Commands"
+.TH SWAP 1M "Apr 11, 2008"
 .SH NAME
 swap \- swap administrative interface
 .SH SYNOPSIS
@@ -39,7 +39,6 @@ the system swap areas used by the memory manager.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fIswapname\fR [\fIswaplow\fR] [\fIswaplen\fR]\fR
 .ad
@@ -141,7 +140,6 @@ The client can then run \fBswap\fR \fB-a\fR to add the swap space:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIswapname\fR\fR
 .ad
@@ -159,7 +157,6 @@ swap areas.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -171,7 +168,6 @@ repetitively dividing by 1024.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR\fR
 .ad
@@ -182,7 +178,6 @@ Write the files sizes in units of 1024 bytes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
@@ -191,7 +186,6 @@ Write the files sizes in units of 1024 bytes.
 List the status of all the swap areas. The output has five columns:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpath\fR\fR
 .ad
@@ -202,7 +196,6 @@ The path name for the swap area.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdev\fR\fR
 .ad
@@ -214,7 +207,6 @@ zeroes otherwise.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBswaplo\fR\fR
 .ad
@@ -225,7 +217,6 @@ The \fIswaplow\fR value for the area in 512-byte blocks.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBblocks\fR\fR
 .ad
@@ -236,7 +227,6 @@ The \fIswaplen\fR value for the area in 512-byte blocks.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfree\fR\fR
 .ad
@@ -255,7 +245,6 @@ column of the swap stats.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
@@ -264,7 +253,6 @@ column of the swap stats.
 Print summary information about total swap space usage and availability:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBallocated\fR\fR
 .ad
@@ -276,7 +264,6 @@ store.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBreserved\fR\fR
 .ad
@@ -288,7 +275,6 @@ memory mappings for possible future use.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBused\fR\fR
 .ad
@@ -299,7 +285,6 @@ The total amount of swap space in bytes that is either allocated or reserved.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBavailable\fR\fR
 .ad
diff --git a/usr/src/man/man1m/sync.1m b/usr/src/man/man1m/sync.1m
index a4845034a8..30ad49ac6b 100644
--- a/usr/src/man/man1m/sync.1m
+++ b/usr/src/man/man1m/sync.1m
@@ -1,16 +1,16 @@
 '\" te
 .\"  Copyright 1989 AT&T
-.\" Copyright (c) 1998, Sun Microsystems, Inc. , All Rights Reserved 
+.\" Copyright (c) 1998, Sun Microsystems, Inc. , All Rights Reserved
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH sync 1M "1 Dec 1998" "SunOS 5.11" "System Administration Commands"
+.TH SYNC 1M "Dec 1, 1998"
 .SH NAME
 sync \- update the super block
 .SH SYNOPSIS
 .LP
 .nf
-\fBsync\fR 
+\fBsync\fR
 .fi
 
 .SH DESCRIPTION
diff --git a/usr/src/man/man1m/syncinit.1m b/usr/src/man/man1m/syncinit.1m
index 9fcd354c58..b9275fde3a 100644
--- a/usr/src/man/man1m/syncinit.1m
+++ b/usr/src/man/man1m/syncinit.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH syncinit 1M "9 Mar 1993" "SunOS 5.11" "System Administration Commands"
+.TH SYNCINIT 1M "Mar 9, 1993"
 .SH NAME
 syncinit \- set serial line interface operating parameters
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/syncinit\fR \fIdevice\fR 
+\fB/usr/sbin/syncinit\fR \fIdevice\fR
      [ [\fIbaud_rate\fR] | [\fIkeyword\fR=\fIvalue\fR,]... | [\fIsingle-word\fR \fIoption\fR]]
 .fi
 
@@ -40,52 +40,50 @@ The following options are supported:
 
 .sp
 .TS
-tab();
-lw(.87i) lw(.87i) lw(3.76i) 
-lw(.87i) lw(.87i) lw(3.76i) 
-.
-\fBKeyword\fR\fBValue\fR\fBEffect\fR
-\fBloop\fRyesT{
+l l l
+l l l .
+\fBKeyword\fR	\fBValue\fR	\fBEffect\fR
+\fBloop\fR	yes	T{
 Set the port to operate in \fBinternal loopback\fR mode. The receiver is electrically disconnected from the DCE receive data input and tied to the outgoing transmit data line. Transmit data is available to the DCE. The Digital Phase-Locked Loop (DPLL) may not be used as a clock source in this mode. If no other clocking options have been specified, perform the equivalent of \fBtxc=baud\fR and \fBrxc=baud\fR.
 T}
-noT{
+	no	T{
 Disable internal loopback mode.  If no other clocking options have been specified, perform the equivalent of \fBtxc=txc\fR and \fBrxc=rxc\fR.
 T}
-\fBecho\fRyesT{
+\fBecho\fR	yes	T{
 Set the port to operate in \fBauto-echo\fR mode.  The transmit data output is electrically disconnected from the transmitter and tied to the receive data input. Incoming receive data is still visible.  Use of this mode in combination with local loopback mode has no value, and should be rejected by the device driver. The \fBauto-echo\fR mode is useful to make a system become the endpoint of a remote loopback test.
 T}
-noDisable \fBauto-echo\fR mode.
-\fBnrzi\fRyesT{
-Set the port to operate with \fBNRZI\fR data encoding.  
+	no	Disable \fBauto-echo\fR mode.
+\fBnrzi\fR	yes	T{
+Set the port to operate with \fBNRZI\fR data encoding.
 T}
-noT{
-Set the port to operate with \fBNRZ\fR data encoding.  
+	no	T{
+Set the port to operate with \fBNRZ\fR data encoding.
 T}
-\fBtxc\fR\fBtxc\fRT{
+\fBtxc\fR	\fBtxc\fR	T{
 Transmit clock source will be the \fBTxC\fR signal (pin 15).
 T}
-\fBrxc\fRT{
+	\fBrxc\fR	T{
 Transmit clock source will be the \fBRxC\fR signal (pin 17).
 T}
-\fBbaud \fRT{
+	\fBbaud \fR	T{
 Transmit clock source will be the internal \fBbaud rate generator\fR.
 T}
-\fBpll\fRT{
+	\fBpll\fR	T{
 Transmit clock source will be the output of the \fBDPLL\fR circuit.
 T}
-\fBrxc\fR\fBrxc\fRT{
+\fBrxc\fR	\fBrxc\fR	T{
 Receive clock source will be the \fBRxC\fR signal (pin 17).
 T}
-\fBtxc\fRT{
+	\fBtxc\fR	T{
 Receive clock source will be the \fBTxC\fR signal (pin 15).
 T}
-\fBbaud\fRT{
+	\fBbaud\fR	T{
 Receive clock source will be the internal \fBbaud rate generator\fR.
 T}
-\fBpll\fRT{
+	\fBpll\fR	T{
 Receive clock source will be the output of the \fBDPLL\fR circuit.
 T}
-\fBspeed\fR\fIinteger\fRT{
+\fBspeed\fR	\fIinteger\fR	T{
 Set the baud rate to \fIinteger\fR bits per second.
 T}
 .TE
@@ -98,15 +96,13 @@ time:
 
 .sp
 .TS
-tab();
-lw(2.75i) lw(2.75i) 
-lw(2.75i) lw(2.75i) 
-.
-\fBKeyword\fR\fBEquivalent to Options:\fR
-\fBexternal\fR\fBtxc=txc rxc=rxc loop=no\fR
-\fBsender\fR\fBtxc=baud rxc=rxc loop=no\fR
-\fBinternal\fR\fBtxc=pll rxc=pll loop=no\fR
-\fBstop\fR\fBspeed=0\fR
+l l
+l l .
+\fBKeyword\fR	\fBEquivalent to Options:\fR
+\fBexternal\fR	\fBtxc=txc rxc=rxc loop=no\fR
+\fBsender\fR	\fBtxc=baud rxc=rxc loop=no\fR
+\fBinternal\fR	\fBtxc=pll rxc=pll loop=no\fR
+\fBstop\fR	\fBspeed=0\fR
 .TE
 
 .SH EXAMPLES
@@ -150,7 +146,6 @@ speed=0, loopback=no, echo=no, nrzi=no, txc=txc, rxc=rxc
 .SH DIAGNOSTICS
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdevice\fR\fB missing minor device number\fR\fR
 .ad
@@ -162,7 +157,6 @@ minor device number.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbad speed: \fR\fIarg\fR\fR
 .ad
@@ -174,7 +168,6 @@ interpreted as a decimal integer.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBBad arg: \fR\fIarg\fR\fR
 .ad
@@ -185,7 +178,6 @@ The string  \fIarg\fR did not make sense as an option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBioctl failure code = \fR\fIerrno\fR\fR
 .ad
diff --git a/usr/src/man/man1m/syncloop.1m b/usr/src/man/man1m/syncloop.1m
index 3e041083cd..0c9a462db3 100644
--- a/usr/src/man/man1m/syncloop.1m
+++ b/usr/src/man/man1m/syncloop.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH syncloop 1M "9 Mar 1993" "SunOS 5.11" "System Administration Commands"
+.TH SYNCLOOP 1M "Mar 9, 1993"
 .SH NAME
 syncloop \- synchronous serial loopback test program
 .SH SYNOPSIS
@@ -80,25 +80,23 @@ The options for \fBsyncloop\fR are described in the following table:
 
 .sp
 .TS
-tab();
-cw(.74i) cw(1.11i) cw(.78i) cw(2.87i) 
-lw(.74i) lw(1.11i) lw(.78i) lw(2.87i) 
-.
-\fBOption\fR\fBParameter\fR\fBDefault\fR\fBDescription\fR
-\fB-c\fR\fIpacket_count\fR100T{
+c c c c
+l l l l .
+\fBOption\fR	\fBParameter\fR	\fBDefault\fR	\fBDescription\fR
+\fB-c\fR	\fIpacket_count\fR	100	T{
 Specifies the number of packets to be sent in the multiple-packet phase.
 T}
-\fB-d\fR\fIhex_data_byte\fR\fIrandom\fRT{
+\fB-d\fR	\fIhex_data_byte\fR	\fIrandom\fR	T{
 Specifies that each packet will be filled with bytes with the value of \fIhex_data_byte\fR.
 T}
-\fB-l\fR\fIpacket_length\fR100T{
-Specifies the length of each packet in bytes.  
+\fB-l\fR	\fIpacket_length\fR	100	T{
+Specifies the length of each packet in bytes.
 T}
-\fB-s\fR\fIline_speed\fR9600Bit rate in bits per second.
-\fB-v\fRT{
+\fB-s\fR	\fIline_speed\fR	9600	Bit rate in bits per second.
+\fB-v\fR			T{
 Sets verbose mode.  If data errors occur, the expected and received data is displayed.
 T}
-\fB-t\fR\fItest_type\fR\fInone\fRT{
+\fB-t\fR	\fItest_type\fR	\fInone\fR	T{
 A number, from 1 to 4, that specifies which test to perform.  The values for \fItest_type\fR are as follows: \fB1\fR: Internal loopback test.  Port loopback is on.  Transmit and receive clock sources are internal (baud rate generator). \fB2\fR: External loopback test.  Port loopback is off.  Transmit and receive clock sources are internal.  Requires a loopback plug suitable to the port under test. \fB3\fR: External loopback test.  Port loopback is off.  Transmit and receive clock sources are external (modem).  Requires that one of the local modem, the remote modem, or the remote system be set in a loopback configuration. \fB4\fR: Test using predefined parameters.  User defines hardware configuration and may select port parameters using the \fBsyncinit\fR(1M) command.
 T}
 .TE
@@ -149,7 +147,6 @@ using 5000 packets and a bit rate of 56Kbps:
 .SH DIAGNOSTICS
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdevice\fR\fB missing minor device number\fR\fR
 .ad
@@ -161,7 +158,6 @@ minor device number.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinvalid packet length: \fR\fInnn\fR\fR
 .ad
@@ -172,7 +168,6 @@ The packet length was specified to be less than zero or greater than 4096.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpoll: nothing to read\fR\fR
 .ad
@@ -183,7 +178,6 @@ The packet length was specified to be less than zero or greater than 4096.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpoll: nothing to read or write.\fR\fR
 .ad
@@ -195,7 +189,6 @@ that output would be blocked if attempted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlen \fR\fIxxx\fR\fB should be \fR\fIyyy\fR\fR
 .ad
@@ -207,7 +200,6 @@ length of \fIxxx\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fInnn\fR\fB packets lost in outbound queueing\fR\fR
 .ad
@@ -218,7 +210,6 @@ length of \fIxxx\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fInnn\fR\fB packets lost in inbound queueing\fR\fR
 .ad
diff --git a/usr/src/man/man1m/syncstat.1m b/usr/src/man/man1m/syncstat.1m
index 2ad0c1320a..bc9ce30ea0 100644
--- a/usr/src/man/man1m/syncstat.1m
+++ b/usr/src/man/man1m/syncstat.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH syncstat 1M "9 Mar 1993" "SunOS 5.11" "System Administration Commands"
+.TH SYNCSTAT 1M "Mar 9, 1993"
 .SH NAME
 syncstat \- report driver statistics from a synchronous serial link
 .SH SYNOPSIS
@@ -39,27 +39,25 @@ The following is a breakdown of  \fBsyncstat\fR output:
 
 .sp
 .TS
-tab();
-lw(1.1i) lw(4.4i) 
-lw(1.1i) lw(4.4i) 
-.
-\fBspeed\fRT{
+l l
+l l .
+\fBspeed\fR	T{
 The line speed the device has been set to operate at. It is the user's responsibility to make this value correspond to the modem clocking speed when clocking is provided by the modem.
 T}
-\fBipkts\fRThe total number of input packets.
-\fBopkts\fRThe total number of output packets.
-\fBundrun\fRT{
+\fBipkts\fR	The total number of input packets.
+\fBopkts\fR	The total number of output packets.
+\fBundrun\fR	T{
 The number of transmitter underrun errors.
 T}
-\fBovrrun\fRThe number of receiver overrun errors.
-\fBabort\fRThe number of aborted received frames.
-\fBcrc\fRT{
+\fBovrrun\fR	The number of receiver overrun errors.
+\fBabort\fR	The number of aborted received frames.
+\fBcrc\fR	T{
 The number of received frames with CRC errors.
 T}
-\fBisize\fRT{
+\fBisize\fR	T{
 The average size (in bytes) of input packets.
 T}
-\fBosize\fRT{
+\fBosize\fR	T{
 The average size (in bytes) of output packets.
 T}
 .TE
@@ -67,12 +65,10 @@ T}
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 12n
-.rt  
 Clear the accumulated statistics for the device specified. This may be useful
 when it is not desirable to unload a particular driver, or when the driver is
 not capable of being unloaded.
@@ -80,12 +76,10 @@ not capable of being unloaded.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIinterval\fR\fR
 .ad
 .RS 12n
-.rt  
 \fBsyncstat\fR samples the statistics every  \fIinterval\fR seconds and reports
 incremental changes. The output reports line utilization for input and output
 in place of average packet sizes. These are the relationships between bytes
@@ -102,7 +96,7 @@ indefinitely, with a column heading printed every twenty lines for convenience.
 example# \fBsyncstat zsh0\fR
 
 
-speed ipkts opkts undrun ovrrun abort crc isize osize 
+speed ipkts opkts undrun ovrrun abort crc isize osize
 9600  15716 17121   0      0      1    3   98    89
 .fi
 .in -2
@@ -144,7 +138,6 @@ ipkts opkts undrun ovrrun abort crc iutil outil
 .SH DIAGNOSTICS
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbad interval: \fR\fIarg\fR\fR
 .ad
@@ -156,7 +149,6 @@ understood.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdevice\fR\fB missing minor device number\fR\fR
 .ad
@@ -168,7 +160,6 @@ minor device number.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbaud rate not set\fR\fR
 .ad
diff --git a/usr/src/man/man1m/sysdef.1m b/usr/src/man/man1m/sysdef.1m
index c15df7d5c3..146a07636c 100644
--- a/usr/src/man/man1m/sysdef.1m
+++ b/usr/src/man/man1m/sysdef.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH sysdef 1M "25 Feb 2009" "SunOS 5.11" "System Administration Commands"
+.TH SYSDEF 1M "Feb 25, 2009"
 .SH NAME
 sysdef \- output system definition
 .SH SYNOPSIS
@@ -34,12 +34,10 @@ The default system \fInamelist\fR is \fB/dev/kmem\fR.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 15n
-.rt  
 Prints the configuration information from \fB/dev/kmem\fR. This is the default
 and only needs to be specified if the configuration information from both
 \fB/dev/kmem\fR and the system file specified with the "\fB-n\fR
@@ -48,24 +46,20 @@ and only needs to be specified if the configuration information from both
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fInamelist\fR\fR
 .ad
 .RS 15n
-.rt  
 Specifies a \fInamelist\fR other than the default (\fB/dev/kmem\fR). The
 \fInamelist\fR specified must be a valid bootable operating system.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 15n
-.rt  
 Prints the identifier of the current host in hexadecimal. If \fBsysdef\fR
 \fB-h\fR is executed  within a non-global zone and the zone emulates a host
 identifier, then the zone's host identifier is printed. This numeric value is
@@ -74,24 +68,20 @@ not guaranteed to be unique.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 15n
-.rt  
 The output includes the configuration of system peripherals formatted as a
 device tree.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
 .RS 15n
-.rt  
 For each system peripheral in the device tree, display the name of the device
 driver used to manage the peripheral.
 .RE
@@ -156,12 +146,10 @@ Node 'SUNW,Ultra-5_10', unit #-1
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/kmem\fR\fR
 .ad
 .RS 13n
-.rt  
 default operating system image
 .RE
 
diff --git a/usr/src/man/man1m/syseventadm.1m b/usr/src/man/man1m/syseventadm.1m
index 238e1123f8..8bd8d5786c 100644
--- a/usr/src/man/man1m/syseventadm.1m
+++ b/usr/src/man/man1m/syseventadm.1m
@@ -3,25 +3,25 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH syseventadm 1M "28 Sep 2005" "SunOS 5.11" "System Administration Commands"
+.TH SYSEVENTADM 1M "Sep 28, 2005"
 .SH NAME
 syseventadm \- sysevent event specification administration
 .SH SYNOPSIS
 .LP
 .nf
-\fBsyseventadm\fR add [\fB-R\fR \fIrootdir\fR] [\fB-v\fR \fIvendor\fR] [\fB-p\fR \fIpublisher\fR] 
+\fBsyseventadm\fR add [\fB-R\fR \fIrootdir\fR] [\fB-v\fR \fIvendor\fR] [\fB-p\fR \fIpublisher\fR]
      [\fB-c\fR \fIclass\fR] [\fB-s\fR \fIsubclass\fR] [\fB-u\fR \fIusername\fR] \fIpath\fR [\fIargs\fR]
 .fi
 
 .LP
 .nf
-\fBsyseventadm\fR remove [\fB-R\fR \fIrootdir\fR] [\fB-v\fR \fIvendor\fR] [\fB-p\fR \fIpublisher\fR] 
+\fBsyseventadm\fR remove [\fB-R\fR \fIrootdir\fR] [\fB-v\fR \fIvendor\fR] [\fB-p\fR \fIpublisher\fR]
      [\fB-c\fR \fIclass\fR] [\fB-s\fR \fIsubclass\fR] [\fB-u\fR \fIusername\fR] [\fIpath\fR [\fIargs\fR]]
 .fi
 
 .LP
 .nf
-\fBsyseventadm\fR list [\fB-R\fR \fIrootdir\fR] [\fB-v\fR \fIvendor\fR] [\fB-p\fR \fIpublisher\fR] 
+\fBsyseventadm\fR list [\fB-R\fR \fIrootdir\fR] [\fB-v\fR \fIvendor\fR] [\fB-p\fR \fIpublisher\fR]
      [\fB-c\fR \fIclass\fR] [\fB-s\fR \fIsubclass\fR] [\fB-u\fR \fIusername\fR] [\fIpath\fR [\fIargs\fR]]
 .fi
 
@@ -94,67 +94,55 @@ embedded in text, it may be delineated by \fB${\fR and \fB}\fR. A \fB\e\fR
 before the \fB$\fR causes macro expansion not to occur.
 .sp
 .ne 2
-.mk
 .na
 \fB$\fIclass\fR\fR
 .ad
 .RS 14n
-.rt  
 The class string defining the event
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB$\fIpublisher\fR\fR
 .ad
 .RS 14n
-.rt  
 The publisher string defining the event
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB$\fIsequence\fR\fR
 .ad
 .RS 14n
-.rt  
 The sequence number of the event.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB$\fIsubclass\fR\fR
 .ad
 .RS 14n
-.rt  
 The subclass string defining the event
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB$\fItimestamp\fR\fR
 .ad
 .RS 14n
-.rt  
 The timestamp of the event.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB$\fIvendor\fR\fR
 .ad
 .RS 14n
-.rt  
 The vendor string defining the event
 .RE
 
@@ -196,34 +184,28 @@ The \fBadd\fR, \fBlist\fR and \fBremove\fR subcommands support the following
 options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIclass\fR\fR
 .ad
 .RS 16n
-.rt  
 Specify the event class, \fIclass\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIpublisher\fR\fR
 .ad
 .RS 16n
-.rt  
 Specify the event publisher, \fIpublisher\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIrootdir\fR\fR
 .ad
 .RS 16n
-.rt  
 Specify an alternate root path, \fIrootdir\fR.
 .LP
 Note -
@@ -238,34 +220,28 @@ zone's file system. See \fBzones\fR(5).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsubclass\fR\fR
 .ad
 .RS 16n
-.rt  
 Specify the event subclass, \fIsubclass\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIusername\fR\fR
 .ad
 .RS 16n
-.rt  
 Specify the username (\fIusername\fR) to invoke the command.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR \fIvendor\fR\fR
 .ad
 .RS 16n
-.rt  
 Specify the vendor (\fIvendor\fR) that defines the event. Events defined by
 third-party software should specify the company's stock symbol as \fIvendor\fR.
 Sun-defined events use \fBSUNW\fR.
@@ -278,23 +254,19 @@ The \fBadd\fR, \fBlist\fR and \fBremove\fR subcommands support the following
 options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIargs\fR\fR
 .ad
 .RS 8n
-.rt  
 Command arguments
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpath\fR\fR
 .ad
 .RS 8n
-.rt  
 Full path of command to be run in response to event
 .RE
 
@@ -429,67 +401,55 @@ The following example removes all event handlers specified to run the command
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 No matching event specification found (remove or list commands only).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Incorrect command usage.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 5n
-.rt  
 Permission denied.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR\fR
 .ad
 .RS 5n
-.rt  
 Command failed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB5\fR\fR
 .ad
 .RS 5n
-.rt  
 Out of memory.
 .RE
 
diff --git a/usr/src/man/man1m/syseventconfd.1m b/usr/src/man/man1m/syseventconfd.1m
index 69e4080884..ac559248fe 100644
--- a/usr/src/man/man1m/syseventconfd.1m
+++ b/usr/src/man/man1m/syseventconfd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH syseventconfd 1M "6 Aug 2004" "SunOS 5.11" "System Administration Commands"
+.TH SYSEVENTCONFD 1M "Aug 6, 2004"
 .SH NAME
 syseventconfd \- kernel system event command invocation daemon
 .SH SYNOPSIS
@@ -23,12 +23,10 @@ in response to kernel system events received from \fBsyseventd\fR(1M).
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrootdir\fR\fR
 .ad
 .RS 14n
-.rt  
 Cause \fBsyseventconfd\fR to use an alternate root path when creating its door.
 The root path must match the root path used to invoke \fBsyseventd\fR.
 .RE
@@ -36,7 +34,6 @@ The root path must match the root path used to invoke \fBsyseventd\fR.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/sysevent/syseventconfd_event_service\fR\fR
 .ad
@@ -47,7 +44,6 @@ The root path must match the root path used to invoke \fBsyseventd\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/sysevent/modules/sysevent_conf_mod.so\fR\fR
 .ad
diff --git a/usr/src/man/man1m/syseventd.1m b/usr/src/man/man1m/syseventd.1m
index 07d7253384..c202b9cbec 100644
--- a/usr/src/man/man1m/syseventd.1m
+++ b/usr/src/man/man1m/syseventd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH syseventd 1M "6 Aug 2004" "SunOS 5.11" "System Administration Commands"
+.TH SYSEVENTD 1M "Aug 6, 2004"
 .SH NAME
 syseventd \- kernel system event notification daemon
 .SH SYNOPSIS
@@ -36,23 +36,19 @@ queue.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdebug_level\fR\fR
 .ad
 .RS 18n
-.rt  
 Enable debug mode. Messages are printed to the invoking user's terminal.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrootdir\fR\fR
 .ad
 .RS 18n
-.rt  
 Cause \fBsyseventd\fR to use an alternate root path when creating its door and
 lock files. Modules continue to be loaded from the standard module directories.
 .RE
@@ -63,30 +59,25 @@ lock files. Modules continue to be loaded from the standard module directories.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR \fR
 .ad
 .RS 12n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnon-zero\fR\fR
 .ad
 .RS 12n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/sysevent/syseventd_daemon.lock\fR\fR
 .ad
@@ -97,7 +88,6 @@ daemon lock file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/sysevent/sysevent_door\fR \fR
 .ad
@@ -108,7 +98,6 @@ kernel to \fBsyseventd\fR door file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/sysevent/modules\fR \fR
 .ad
@@ -119,7 +108,6 @@ kernel to \fBsyseventd\fR door file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/platform/\fR\fB`\fR\fBuname
 \(emi\fR\fB`\fR\fB/lib/sysevent/modules\fR\fR
@@ -131,7 +119,6 @@ kernel to \fBsyseventd\fR door file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/platform/\fR\fB`\fR\fBuname
 \(emm\fR\fB`\fR\fB/lib/sysevent/modules\fR\fR
diff --git a/usr/src/man/man1m/syslogd.1m b/usr/src/man/man1m/syslogd.1m
index 3df5a1a328..ad6c828457 100644
--- a/usr/src/man/man1m/syslogd.1m
+++ b/usr/src/man/man1m/syslogd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH syslogd 1M "31 Oct 2008" "SunOS 5.11" "System Administration Commands"
+.TH SYSLOGD 1M "Oct 31, 2008"
 .SH NAME
 syslogd \- log system messages
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/syslogd\fR [\fB-d\fR] [\fB-f\fR \fIconfigfile\fR] [\fB-m\fR \fImarkinterval\fR] 
+\fB/usr/sbin/syslogd\fR [\fB-d\fR] [\fB-f\fR \fIconfigfile\fR] [\fB-m\fR \fImarkinterval\fR]
      [\fB-p\fR \fIpath\fR] [\fB-t\fR | \fB-T\fR]
 .fi
 
@@ -87,7 +87,6 @@ and \fBfalse\fR is equivalent to the \fB-T\fR command-line option. The default
 value for \fB-log_from_remote\fR is \fBfalse\fR. See NOTES, below.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLOG_FROM_REMOTE\fR\fR
 .ad
@@ -104,7 +103,6 @@ equivalent to the \fB-t\fR command-line option. The default value for
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -118,7 +116,6 @@ where \fBsyslogd\fR is started.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIconfigfile\fR\fR
 .ad
@@ -129,7 +126,6 @@ Specify an alternate configuration file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fImarkinterval\fR\fR
 .ad
@@ -140,7 +136,6 @@ Specify an interval, in minutes, between mark messages.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIpath\fR\fR
 .ad
@@ -151,7 +146,6 @@ Specify an alternative log device name. The default is \fB/dev/log\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR\fR
 .ad
@@ -163,7 +157,6 @@ This is the default behavior. See .
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
@@ -200,7 +193,7 @@ log file\fB/var/adm/messages\fR.
 .sp
 .in +2
 .nf
-Sep 29 21:41:18 cathy ufs: [ID 845546 kern.notice] 
+Sep 29 21:41:18 cathy ufs: [ID 845546 kern.notice]
                                     alloc /: file system full
 .fi
 .in -2
@@ -241,7 +234,6 @@ systems.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/syslog.conf\fR\fR
 .ad
@@ -252,7 +244,6 @@ Configuration file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/run/syslog.pid\fR\fR
 .ad
@@ -263,7 +254,6 @@ Process \fBID\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/syslogd\fR\fR
 .ad
@@ -275,7 +265,6 @@ command-line options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/log\fR\fR
 .ad
@@ -286,7 +275,6 @@ command-line options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/netconfig\fR\fR
 .ad
@@ -297,7 +285,6 @@ Transport providers available on the system
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/net/transport/hosts\fR\fR
 .ad
@@ -308,7 +295,6 @@ Network hosts for each transport
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/net/transport/services\fR\fR
 .ad
diff --git a/usr/src/man/man1m/tapes.1m b/usr/src/man/man1m/tapes.1m
index cbd8dfb441..034066996c 100644
--- a/usr/src/man/man1m/tapes.1m
+++ b/usr/src/man/man1m/tapes.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH tapes 1M "8 Nov 2002" "SunOS 5.11" "System Administration Commands"
+.TH TAPES 1M "Nov 8, 2002"
 .SH NAME
 tapes \- creates /dev entries for tape drives attached to the system
 .SH SYNOPSIS
@@ -102,12 +102,10 @@ node type string \fBDDI_NT_TAPE\fR when calling\fBddi_create_minor_node\fR(9F).
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIroot_dir\fR\fR
 .ad
 .RS 15n
-.rt  
 Causes \fBtapes\fR to presume that the \fB/dev/rmt\fR directory tree is found
 under \fIroot_dir\fR, not directly under \fB/\fR.
 .RE
@@ -137,10 +135,10 @@ This example demonstrates creating tape device nodes from within the
 struct tape_minor_info {
     char *minor_name;
     int   minor_mode;
-}; 
-/*  
+};
+/*
  * create all combinations of logical tapes
-*/ 
+*/
 static struct tape_minor_info example_tape[] = {
    {"",    0},                     /* default tape */
    {"l",   MT_DENSITY1},
@@ -155,10 +153,10 @@ static struct tape_minor_info example_tape[] = {
    {"c",   MT_DENSITY4},
    {"cb",  MT_DENSITY4 | MT_BSD},
    {"cbn", MT_DENSITY4| MT_BSD | MT_NOREWIND},
-   {NULL,  0}, 
-};   
+   {NULL,  0},
+};
 
-int 
+int
 xktapeattach(dev_info_t *dip, ddi_attach_cmd_t cmd)
 {
    int instance;
@@ -169,7 +167,7 @@ xktapeattach(dev_info_t *dip, ddi_attach_cmd_t cmd)
    for (mdp = example_tape; mdp->minor_name != NULL; mdp++) {
             ddi_create_minor_node(dip, mdp->minor_name, S_IFCHR,
                  (MTMINOR(instance) | mdp->minor_mode), DDI_NT_TAPE, 0);
- } 
+ }
 .fi
 .in -2
 
@@ -242,23 +240,19 @@ devices in \fB/devices\fR).
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/rmt/*\fR\fR
 .ad
 .RS 14n
-.rt  
 logical tape devices
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/devices/*\fR\fR
 .ad
 .RS 14n
-.rt  
 tape device nodes
 .RE
 
diff --git a/usr/src/man/man1m/tcpd.1m b/usr/src/man/man1m/tcpd.1m
index 5bf56a4889..7ebd63d845 100644
--- a/usr/src/man/man1m/tcpd.1m
+++ b/usr/src/man/man1m/tcpd.1m
@@ -2,8 +2,8 @@
 .\"
 .\" Modified for Solaris to to add the Solaris stability classification,
 .\" and to add a note about source availability.
-.\" 
-.TH TCPD 1M
+.\"
+.TH TCPD 1M "Sep 15, 2011"
 .SH NAME
 tcpd \- access control facility for internet services
 .SH DESCRIPTION
@@ -106,10 +106,10 @@ for descriptions of the following attributes:
 .sp
 .TS
 box;
-cbp-1 | cbp-1
+c | c
 l | l .
 ATTRIBUTE TYPE	ATTRIBUTE VALUE
 =
 Interface Stability	Committed
-.TE 
+.TE
 .\" End Sun update
diff --git a/usr/src/man/man1m/tcpdchk.1m b/usr/src/man/man1m/tcpdchk.1m
index ff6940ce1c..364bd96d8e 100644
--- a/usr/src/man/man1m/tcpdchk.1m
+++ b/usr/src/man/man1m/tcpdchk.1m
@@ -2,8 +2,8 @@
 .\"
 .\" Modified for Solaris to to add the Solaris stability classification,
 .\" and to add a note about source availability.
-.\" 
-.TH TCPDCHK 1M
+.\"
+.TH TCPDCHK 1M "Sep 15, 2011"
 .SH NAME
 tcpdchk \- tcp wrapper configuration checker
 .SH SYNOPSYS
@@ -14,7 +14,7 @@ tcpdchk [-a] [-d] [-i inet_conf] [-v]
 potential and real problems it can find. The program examines the
 \fItcpd\fR access control files (by default, these are
 \fI/etc/hosts.allow\fR and \fI/etc/hosts.deny\fR), and compares the
-entries in these files against entries in the \fIinetd\fR 
+entries in these files against entries in the \fIinetd\fR
 network configuration files.
 .PP
 \fItcpdchk\fR reports problems such as non-existent pathnames; services
@@ -64,11 +64,10 @@ inetadm(1M), managing inetd services in the Service Management Framework.
 
 .SH AUTHORS
 .na
-.nf
 Wietse Venema (wietse@wzv.win.tue.nl),
 Department of Mathematics and Computing Science,
 Eindhoven University of Technology
-Den Dolech 2, P.O. Box 513, 
+Den Dolech 2, P.O. Box 513,
 5600 MB Eindhoven, The Netherlands
 \" @(#) tcpdchk.8 1.3 95/01/08 17:00:30
 .\" Begin Sun update
@@ -79,10 +78,10 @@ for descriptions of the following attributes:
 .sp
 .TS
 box;
-cbp-1 | cbp-1
+c | c
 l | l .
 ATTRIBUTE TYPE	ATTRIBUTE VALUE
 =
 Interface Stability	Committed
-.TE 
+.TE
 .\" End Sun update
diff --git a/usr/src/man/man1m/tcpdmatch.1m b/usr/src/man/man1m/tcpdmatch.1m
index 2599717b2c..96929f238f 100644
--- a/usr/src/man/man1m/tcpdmatch.1m
+++ b/usr/src/man/man1m/tcpdmatch.1m
@@ -2,8 +2,8 @@
 .\"
 .\" Modified for Solaris to to add the Solaris stability classification,
 .\" and to add a note about source availability.
-.\" 
-.TH TCPDMATCH 1M
+.\"
+.TH TCPDMATCH 1M "Sep 15, 2011"
 .SH NAME
 tcpdmatch \- tcp wrapper oracle
 .SH SYNOPSYS
@@ -61,18 +61,15 @@ you suspect that the program uses the wrong one.
 To predict how \fItcpd\fR would handle a telnet request from the local
 system:
 .sp
-.ti +5
 tcpdmatch in.telnetd localhost
 .PP
 The same request, pretending that hostname lookup failed:
 .sp
-.ti +5
 tcpdmatch in.telnetd 127.0.0.1
 .PP
 To predict what tcpd would do when the client name does not match the
 client address:
 .sp
-.ti +5
 tcpdmatch in.telnetd paranoid
 .PP
 On some systems, daemon names have no `in.' prefix, or \fItcpdmatch\fR
@@ -96,11 +93,10 @@ inetadm(1M), managing inetd services in the Service Management Framework.
 
 .SH AUTHORS
 .na
-.nf
 Wietse Venema (wietse@wzv.win.tue.nl),
 Department of Mathematics and Computing Science,
 Eindhoven University of Technology
-Den Dolech 2, P.O. Box 513, 
+Den Dolech 2, P.O. Box 513,
 5600 MB Eindhoven, The Netherlands
 \" @(#) tcpdmatch.8 1.5 96/02/11 17:01:35
 .\" Begin Sun update
@@ -111,10 +107,10 @@ for descriptions of the following attributes:
 .sp
 .TS
 box;
-cbp-1 | cbp-1
+c | c
 l | l .
 ATTRIBUTE TYPE	ATTRIBUTE VALUE
 =
 Interface Stability	Committed
-.TE 
+.TE
 .\" End Sun update
diff --git a/usr/src/man/man1m/th_define.1m b/usr/src/man/man1m/th_define.1m
index 3efe1d8e24..0428555376 100644
--- a/usr/src/man/man1m/th_define.1m
+++ b/usr/src/man/man1m/th_define.1m
@@ -3,35 +3,35 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH th_define 1M "11 Apr 2001" "SunOS 5.11" "System Administration Commands"
+.TH TH_DEFINE 1M "Apr 11, 2001"
 .SH NAME
 th_define \- create fault injection test harness error specifications
 .SH SYNOPSIS
 .LP
 .nf
-\fBth_define\fR [\fB-n\fR \fIname\fR \fB-i\fR \fIinstance\fR| \fB-P\fR \fIpath\fR] [\fB-a\fR \fIacc_types\fR] 
-     [\fB-r\fR \fIreg_number\fR] [\fB-l\fR \fIoffset\fR [\fIlength\fR]] 
-     [\fB-c\fR \fIcount\fR [\fIfailcount\fR]] [\fB-o\fR \fIoperator\fR [\fIoperand\fR]] 
+\fBth_define\fR [\fB-n\fR \fIname\fR \fB-i\fR \fIinstance\fR| \fB-P\fR \fIpath\fR] [\fB-a\fR \fIacc_types\fR]
+     [\fB-r\fR \fIreg_number\fR] [\fB-l\fR \fIoffset\fR [\fIlength\fR]]
+     [\fB-c\fR \fIcount\fR [\fIfailcount\fR]] [\fB-o\fR \fIoperator\fR [\fIoperand\fR]]
      [\fB-f\fR \fIacc_chk\fR] [\fB-w\fR \fImax_wait_period\fR [\fIreport_interval\fR]]
 .fi
 
 .LP
 .nf
-\fBor\fR 
+\fBor\fR
 .fi
 
 .LP
 .nf
-\fBth_define\fR [\fB-n\fR \fIname\fR \fB-i\fR \fIinstance\fR| \fB-P\fR \fIpath\fR] 
-     [\fB-a\fR log [\fIacc_types\fR] [\fB-r\fR \fIreg_number\fR] [\fB-l\fR \fIoffset\fR [\fIlength\fR]]] 
-     [\fB-c\fR \fIcount\fR [\fIfailcount\fR]] [\fB-s\fR \fIcollect_time\fR] [\fB-p\fR \fIpolicy\fR] 
-     [\fB-x\fR \fIflags\fR] [\fB-C\fR \fIcomment_string\fR] 
+\fBth_define\fR [\fB-n\fR \fIname\fR \fB-i\fR \fIinstance\fR| \fB-P\fR \fIpath\fR]
+     [\fB-a\fR log [\fIacc_types\fR] [\fB-r\fR \fIreg_number\fR] [\fB-l\fR \fIoffset\fR [\fIlength\fR]]]
+     [\fB-c\fR \fIcount\fR [\fIfailcount\fR]] [\fB-s\fR \fIcollect_time\fR] [\fB-p\fR \fIpolicy\fR]
+     [\fB-x\fR \fIflags\fR] [\fB-C\fR \fIcomment_string\fR]
      [\fB-e\fR \fIfixup_script\fR [\fIargs\fR]]
 .fi
 
 .LP
 .nf
-\fBor\fR 
+\fBor\fR
 .fi
 
 .LP
@@ -100,7 +100,6 @@ error coverage as described below.
 The following options are available:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR \fIname\fR \fR
 .ad
@@ -111,7 +110,6 @@ Specify the name of the driver to test. (String)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fI instance\fR \fR
 .ad
@@ -123,7 +121,6 @@ Test only the specified driver instance (-1 matches all instances of driver).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR\fI path\fR \fR
 .ad
@@ -134,7 +131,6 @@ Specify the full device path of the driver to test. (String)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIreg_number\fR \fR
 .ad
@@ -146,7 +142,6 @@ and DMA handles). (Numeric)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fI acc_types\fR \fR
 .ad
@@ -170,7 +165,6 @@ writing.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIoffset \fR\fB[\fR\fIlength\fR\fB]\fR\fR
 .ad
@@ -189,7 +183,6 @@ is maximal.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcount\fR\fB[\fR\fIfailcount\fR\fB]\fR \fR
 .ad
@@ -219,7 +212,6 @@ further \fIfailcount\fR - 1.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fI operator \fR\fB[\fR\fIoperand\fR\fB]\fR \fR
 .ad
@@ -229,57 +221,47 @@ For qualifying PIO read and write accesses, the value read from or written to
 the hardware is corrupted according to the value of \fIoperator\fR:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEQ\fR\fR
 .ad
 .RS 7n
-.rt  
 \fIoperand\fR is returned to the driver.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBOR\fR\fR
 .ad
 .RS 7n
-.rt  
 \fIoperand\fR is bitwise ORed with the real value.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBAND\fR\fR
 .ad
 .RS 7n
-.rt  
 \fIoperand\fR is bitwise ANDed with the real value.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBXOR\fR\fR
 .ad
 .RS 7n
-.rt  
 \fIoperand\fR is bitwise XORed with the real value.
 .RE
 
 For PIO write accesses, the following operator is allowed:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNO\fR\fR
 .ad
 .RS 6n
-.rt  
 Simply ignore the driver's attempt to write to the hardware.
 .RE
 
@@ -296,12 +278,10 @@ interrupts has been requested then the operator may take any of the following
 values:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDELAY\fR\fR
 .ad
 .RS 9n
-.rt  
 After \fIcount\fR accesses (see the \fB-c\fR option), delay delivery of the
 next \fIfailcount\fR number of interrupts for \fIoperand\fR number of
 microseconds.
@@ -309,24 +289,20 @@ microseconds.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLOSE\fR\fR
 .ad
 .RS 9n
-.rt  
 After \fIcount\fR number of interrupts, fail to deliver the next
 \fIfailcount\fR number of real interrupts to the driver.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBEXTRA\fR\fR
 .ad
 .RS 9n
-.rt  
 After \fIcount\fR number of interrupts, start delivering \fIoperand\fR number
 of extra interrupts for the next \fIfailcount\fR number of real interrupts.
 .RE
@@ -337,7 +313,6 @@ access by flipping each bit (XOR with -1).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIacc_chk\fR\fR
 .ad
@@ -352,7 +327,6 @@ access count goes to 1. If the \fIacc_chk\fR parameter is set to 2 or
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR \fImax_wait_period\fR\fB [\fR\fIreport_interval\fR\fB]\fR \fR
 .ad
@@ -372,90 +346,74 @@ fields are integers):
 which are defined as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIft\fR\fR
 .ad
 .RS 13n
-.rt  
 The UTC time when the fault was injected.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fImt\fR\fR
 .ad
 .RS 13n
-.rt  
 The UTC time when the driver reported the fault.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIac\fR\fR
 .ad
 .RS 13n
-.rt  
 The number of remaining non-faulting accesses.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfc\fR\fR
 .ad
 .RS 13n
-.rt  
 The number of remaining faulting accesses.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIchk\fR\fR
 .ad
 .RS 13n
-.rt  
 The value of the \fIacc_chk\fR field of the errdef.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIec\fR\fR
 .ad
 .RS 13n
-.rt  
 The number of fault reports issued by the driver against this errdef (\fImt\fR
 holds the time of the initial report).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIs\fR\fR
 .ad
 .RS 13n
-.rt  
 The severity level reported by the driver.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fI"message"\fR\fR
 .ad
 .RS 13n
-.rt  
 Textual reason why the driver has reported a fault.
 .RE
 
@@ -463,7 +421,6 @@ Textual reason why the driver has reported a fault.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
@@ -474,7 +431,6 @@ Display the command usage string.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIcollect_time\fR \fR
 .ad
@@ -495,7 +451,6 @@ semantics of \fBSIGALRM\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIpolicy\fR\fR
 .ad
@@ -563,7 +518,6 @@ section for further information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fIflags\fR\fR
 .ad
@@ -574,34 +528,28 @@ parameter modifies the way in which the \fBbofi\fR driver logs accesses. It is
 specified as a string containing any combination of the following letters:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBw\fR\fR
 .ad
 .RS 5n
-.rt  
 Continuous logging (that is, the log will wrap when full).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBt\fR\fR
 .ad
 .RS 5n
-.rt  
 Timestamp each log entry (access times are in seconds).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBr\fR\fR
 .ad
 .RS 5n
-.rt  
 Log repeated I/O as individual accesses (for example, a \fBddi_rep_get16\fR(9F)
 call which has a repcount of \fIN\fR is logged \fIN\fR times with each
 transaction logged as size 2 bytes. Without this option, the default logging
@@ -613,7 +561,6 @@ behavior is to log this access once only, with a transaction size of twice the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR \fIcomment_string\fR\fR
 .ad
@@ -626,7 +573,6 @@ enclosed in double quotes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIfixup_script\fR \fB[\fR\fIargs\fR\fB]\fR \fR
 .ad
@@ -643,45 +589,37 @@ offline and again after the instance has been brought online. The following
 variables are passed into the environment of the called executable:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDRIVER_PATH\fR\fR
 .ad
 .RS 22n
-.rt  
 Identifies the device path of the instance.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDRIVER_INSTANCE\fR\fR
 .ad
 .RS 22n
-.rt  
 Identifies the instance number of the device.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDRIVER_UNCONFIGURE\fR\fR
 .ad
 .RS 22n
-.rt  
 Has the value 1 when the instance is about to be taken offline.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDRIVER_CONFIGURE\fR\fR
 .ad
 .RS 22n
-.rt  
 Has the value 1 when the instance has just been brought online.
 .RE
 
@@ -883,56 +821,46 @@ policies is selected, all transfer sizes are treated equally. Otherwise, only
 those specified transfer sizes will be selected.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBonebyte\fR\fR
 .ad
 .RS 13n
-.rt  
 Create errdefs for one byte accesses (\fBddi_get8()\fR)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtwobyte\fR\fR
 .ad
 .RS 13n
-.rt  
 Create errdefs for two byte accesses (\fBddi_get16()\fR)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfourbyte\fR\fR
 .ad
 .RS 13n
-.rt  
 Create errdefs for four byte accesses (\fBddi_get32()\fR)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBeightbyte\fR\fR
 .ad
 .RS 13n
-.rt  
 Create errdefs for eight byte accesses (\fBddi_get64()\fR)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmultibyte\fR\fR
 .ad
 .RS 13n
-.rt  
 Create errdefs for repeated byte accesses (\fBddi_rep_get*()\fR)
 .RE
 
@@ -963,34 +891,28 @@ A location whose access patterns lies within these cutoffs is regarded as a
 location that is accessed with median frequency.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrare\fR\fR
 .ad
 .RS 10n
-.rt  
 Create errdefs for locations that are rarely accessed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcommon\fR\fR
 .ad
 .RS 10n
-.rt  
 Create errdefs for locations that are commonly accessed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmedian\fR\fR
 .ad
 .RS 10n
-.rt  
 Create errdefs for locations that are accessed a median frequency.
 .RE
 
@@ -1001,34 +923,28 @@ If a transaction is duplicated, either a single or multiple errdefs will be
 written to the test scripts, depending upon the following two policies:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmaximal\fR\fR
 .ad
 .RS 13n
-.rt  
 Create multiple errdefs for locations that are repeatedly accessed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBunbiased\fR\fR
 .ad
 .RS 13n
-.rt  
 Create a single errdef for locations that are repeatedly accessed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBoperators\fR\fR
 .ad
 .RS 13n
-.rt  
 For each location, a default operator and operand is typically applied. For
 maximal test coverage, this default may be modified using the \fBoperators\fR
 policy so that a separate errdef is created for each of the possible corruption
diff --git a/usr/src/man/man1m/th_manage.1m b/usr/src/man/man1m/th_manage.1m
index f5e5afbd63..011a8f3365 100644
--- a/usr/src/man/man1m/th_manage.1m
+++ b/usr/src/man/man1m/th_manage.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH th_manage 1M "4 Jan 2001" "SunOS 5.11" "System Administration Commands"
+.TH TH_MANAGE 1M "Jan 4, 2001"
 .SH NAME
 th_manage \- manage the fault injection test harness
 .SH SYNOPSIS
@@ -30,12 +30,10 @@ fault injection specifications (errdefs) defined by \fBth_define\fR(1M).
 specified by \fIname\fR and \fIinstance\fR (or \fIpath\fR). The commands are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbroadcast\fR \fR
 .ad
 .RS 18n
-.rt  
 Awaken all \fBth_define\fR processes, causing them to display their current
 status and exit if the errdef is now defunct (that is, if \fIcount\fR,
 \fIfailcount \fR, and \fIacc_chk \fR are all zero).
@@ -43,12 +41,10 @@ status and exit if the errdef is now defunct (that is, if \fIcount\fR,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBclear_acc_chk\fR \fR
 .ad
 .RS 18n
-.rt  
 Awaken all \fBth_define\fR processes. If \fIcount\fR and \fIfailcount\fR are
 already zero, then set \fIacc_chk\fR to zero, so that \fBth_define\fR exits
 once it has displayed its status.
@@ -56,12 +52,10 @@ once it has displayed its status.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBclear_errdefs\fR \fR
 .ad
 .RS 18n
-.rt  
 Awaken all \fBth_define\fR \fBprocesses\fR. \fIcount\fR, \fIfailcount\fR and
 \fIacc_chk\fR are all set to zero so that all \fBth_define\fR commands exit
 once they have displayed their status.
@@ -69,12 +63,10 @@ once they have displayed their status.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBclear_errors\fR \fR
 .ad
 .RS 18n
-.rt  
 Awaken all \fBth_define\fR processes. If \fIcount\fR is already zero, set
 \fIfailcount\fR and \fIacc_chk\fR to zero, so that \fBth_define\fR exits once
 it has displayed its status.
@@ -82,34 +74,28 @@ it has displayed its status.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBget_handles\fR \fR
 .ad
 .RS 18n
-.rt  
 List all the access handles.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstart\fR \fR
 .ad
 .RS 18n
-.rt  
 Begin or resume execution of all errdefs.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstop\fR \fR
 .ad
 .RS 18n
-.rt  
 Suspend all errdefs for this \fIname\fR and \fIinstance\fR (or \fIpath).\fR
 .RE
 
diff --git a/usr/src/man/man1m/tic.1m b/usr/src/man/man1m/tic.1m
index cd3af131c4..7a5960e2ab 100644
--- a/usr/src/man/man1m/tic.1m
+++ b/usr/src/man/man1m/tic.1m
@@ -5,7 +5,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH tic 1M "Jun 25, 2011" "SunOS 5.11" "System Administration Commands"
+.TH TIC 1M "Jun 25, 2011"
 .SH NAME
 tic \- terminfo compiler
 .SH SYNOPSIS
@@ -35,24 +35,20 @@ Total compiled entries cannot exceed 4096 bytes. The name field cannot exceed
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 9n
-.rt  
 Specifies to check only \fBfile\fR for errors. Errors in \fBuse=\fR links are
 not detected.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR[\fIn\fR]\fR
 .ad
 .RS 9n
-.rt  
 Specify that (verbose) output be written to standard error trace information
 showing \fBtic\fR's progress. The optional integer \fIn\fR is a number from 1
 to 10, indicating the desired level of detail of information. If \fIn\fR is
@@ -63,12 +59,10 @@ the level of detail is increased.
 .SH OPERANDS
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfile\fR\fR
 .ad
 .RS 8n
-.rt  
 Contains one or more \fBterminfo\fR terminal descriptions in source format [see
 \fBterminfo\fR(4)]. Each description in the file describes the capabilities of
 a particular terminal. When a \fBuse\fR\fI=entry-name\fR field is discovered in
@@ -84,7 +78,6 @@ capabilities that are explicitly defined in the current entry.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/share/lib/terminfo/?/*\fR\fR
 .ad
@@ -101,11 +94,10 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/tnchkdb.1m b/usr/src/man/man1m/tnchkdb.1m
index 3231040ea5..65402216ab 100644
--- a/usr/src/man/man1m/tnchkdb.1m
+++ b/usr/src/man/man1m/tnchkdb.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH tnchkdb 1M "20 Jul 2007" "SunOS 5.11" "System Administration Commands"
+.TH TNCHKDB 1M "Jul 20, 2007"
 .SH NAME
 tnchkdb \- check file syntax of trusted network databases
 .SH SYNOPSIS
@@ -61,36 +61,30 @@ names in \fBtnrhdb\fR are not validated.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR [ \fIpath\fR ]\fR
 .ad
 .RS 15n
-.rt  
 Check \fIpath\fR for proper \fBtnrhdb\fR syntax. If \fIpath\fR is not
 specified, then check \fB/etc/security/tsol/tnrhdb\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR [ \fIpath\fR ]\fR
 .ad
 .RS 15n
-.rt  
 Check \fIpath\fR for proper \fBtnrhtp\fR syntax. If \fIpath\fR is not
 specified, then check \fB/etc/security/tsol/tnrhtp\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-z\fR [ \fIpath\fR ]\fR
 .ad
 .RS 15n
-.rt  
 Check \fIpath\fR for proper \fBtnzonecfg\fR syntax. If \fIpath\fR is not
 specified, then check \fB/etc/security/tsol/tnzonecfg\fR.
 .RE
@@ -122,7 +116,6 @@ checking /etc/security/tsol/tnzonecfg ...
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/tsol/tnrhdb\fR\fR
 .ad
@@ -133,7 +126,6 @@ Trusted network remote-host database
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/tsol/tnrhtp\fR\fR
 .ad
@@ -144,7 +136,6 @@ Trusted network remote-host templates
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/tsol/tnzonecfg\fR\fR
 .ad
@@ -161,13 +152,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/tnctl.1m b/usr/src/man/man1m/tnctl.1m
index 87a5f0c370..351f399d67 100644
--- a/usr/src/man/man1m/tnctl.1m
+++ b/usr/src/man/man1m/tnctl.1m
@@ -3,14 +3,14 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH tnctl 1M "6 Mar 2008" "SunOS 5.11" "System Administration Commands"
+.TH TNCTL 1M "Mar 6, 2008"
 .SH NAME
 tnctl \- configure Trusted Extensions network parameters
 .SH SYNOPSIS
 .LP
 .nf
 \fB/usr/sbin/tnctl\fR [\fB-dfv\fR] [\fB-h\fR \fIhost\fR [/\fIprefix\fR] [:\fItemplate\fR]]
-     [\fB-m\fR \fIzone\fR:\fImlp\fR:\fIshared-mlp\fR][\fB-t\fR \fItemplate\fR [:\fIkey=val\fR [;\fIkey=val\fR]]] 
+     [\fB-m\fR \fIzone\fR:\fImlp\fR:\fIshared-mlp\fR][\fB-t\fR \fItemplate\fR [:\fIkey=val\fR [;\fIkey=val\fR]]]
      [\fB-HTz\fR] \fIfile\fR]
 .fi
 
@@ -43,7 +43,6 @@ information on a running system.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -68,7 +67,6 @@ any known protocol (see \fBprotocols\fR(4)).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -81,7 +79,6 @@ successfully.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -92,7 +89,6 @@ Turn on verbose mode.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIhost\fR[/\fIprefix\fR][:\fItemplate\fR]\fR
 .ad
@@ -108,7 +104,6 @@ specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fIzone\fR:\fImlp\fR:\fIshared-mlp\fR\fR
 .ad
@@ -122,7 +117,6 @@ addresses. The \fIshared-mlp\fR field is effective in the global zone only.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fItemplate\fR[\fIkey=val\fR[;\fIkey=val\fR]]\fR
 .ad
@@ -135,7 +129,6 @@ entry. If \fB-d\fR is specified, then \fIkey=val\fR pairs cannot be specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fIfile\fR\fR
 .ad
@@ -146,7 +139,6 @@ Load all template entries in \fIfile\fR into the kernel cache.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-H\fR \fIfile\fR\fR
 .ad
@@ -157,7 +149,6 @@ Load all remote host entries in \fIfile\fR into the kernel cache.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-z\fR \fIfile\fR\fR
 .ad
@@ -183,19 +174,17 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/tsol/tnrhdb\fR\fR
 .ad
@@ -206,7 +195,6 @@ Trusted network remote-host database
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/tsol/tnrhtp\fR\fR
 .ad
@@ -217,7 +205,6 @@ Trusted network remote-host templates
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/tsol/tnzonecfg\fR\fR
 .ad
@@ -228,7 +215,6 @@ Trusted zone configuration database
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/nsswitch.conf\fR\fR
 .ad
diff --git a/usr/src/man/man1m/tnd.1m b/usr/src/man/man1m/tnd.1m
index 39fa35f55b..2d33b27eb1 100644
--- a/usr/src/man/man1m/tnd.1m
+++ b/usr/src/man/man1m/tnd.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH tnd 1M "15 May 2008" "SunOS 5.11" "System Administration Commands"
+.TH TND 1M "May 15, 2008"
 .SH NAME
 tnd \- trusted network daemon
 .SH SYNOPSIS
@@ -40,12 +40,10 @@ refresh svc:/network/tnd\fR to initiate an immediate database scan by
 the global zone. The following signals cause specific \fBsvcadm\fR actions:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSIGHUP\fR\fR
 .ad
 .RS 11n
-.rt  
 Causes \fBsvcadm refresh svc:/network/tnd\fR to be run.
 .sp
 Initiates a rescan of the local and LDAP \fBtnrhdb\fR and \fBtnrhtp\fR
@@ -54,12 +52,10 @@ databases. \fBtnd\fR updates the kernel database with any changes found.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSIGTERM\fR\fR
 .ad
 .RS 11n
-.rt  
 Causes \fBsvcadm disable svc:/network/tnd\fR to be run.
 .sp
 Terminates the \fBtnd\fR daemon. No changes are made to the kernel database.
@@ -84,12 +80,10 @@ to the \fB/var/tsol/tndlog\fR log file.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIpoll-interval\fR\fR
 .ad
 .RS 20n
-.rt  
 Set poll interval to \fIpoll-interval\fR seconds. The default
 \fIpoll-interval\fR is 1800 seconds (30 minutes).
 .RE
@@ -128,7 +122,6 @@ repository. At the next boot, the \fBtnd\fR poll interval remains the default,
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/tsol/tnrhdb\fR\fR
 .ad
@@ -139,7 +132,6 @@ Trusted network remote-host database
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/tsol/tnrhtp\fR\fR
 .ad
@@ -150,7 +142,6 @@ Trusted network remote-host templates
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/tsol/tnzonecfg\fR\fR
 .ad
@@ -161,7 +152,6 @@ Trusted zone configuration database
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/nsswitch.conf\fR\fR
 .ad
@@ -178,13 +168,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/tninfo.1m b/usr/src/man/man1m/tninfo.1m
index 262b69f2dc..23e0a10a4a 100644
--- a/usr/src/man/man1m/tninfo.1m
+++ b/usr/src/man/man1m/tninfo.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH tninfo 1M "20 Jul 2007" "SunOS 5.11" "System Administration Commands"
+.TH TNINFO 1M "Jul 20, 2007"
 .SH NAME
 tninfo \- print kernel-level network information and statistics
 .SH SYNOPSIS
@@ -20,36 +20,30 @@ information and statistics.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIhostname\fR\fR
 .ad
 .RS 16n
-.rt  
 Display the security structure for the specified host in the remote-host cache.
 The output should reflect what is specified in the \fBtnrhdb\fR database.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fIzone-name\fR\fR
 .ad
 .RS 16n
-.rt  
 Display the MLP configuration associated with the specified zone. The output
 should reflect what is specified in the \fBtnzonecfg\fR database.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fItemplate\fR\fR
 .ad
 .RS 16n
-.rt  
 Display the structure associated with the specified \fItemplate\fR. The output
 should reflect what is specified in the \fBtnrhtp\fR database.
 .RE
@@ -119,7 +113,6 @@ output reflects the definition in the \fBtnrhtp\fR database.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/tsol/tnrhdb\fR\fR
 .ad
@@ -130,7 +123,6 @@ Trusted network remote-host database
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/tsol/tnrhtp\fR\fR
 .ad
@@ -141,7 +133,6 @@ Trusted network remote-host templates
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/security/tsol/tnzonecfg\fR\fR
 .ad
@@ -158,13 +149,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/tpmadm.1m b/usr/src/man/man1m/tpmadm.1m
index f14dcca9cd..77cdde7826 100644
--- a/usr/src/man/man1m/tpmadm.1m
+++ b/usr/src/man/man1m/tpmadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH tpmadm 1M "7 Jul 2009" "SunOS 5.11" "System Administration Commands"
+.TH TPMADM 1M "Jul 7, 2009"
 .SH NAME
 tpmadm \- administer Trusted Platform Module
 .SH SYNOPSIS
@@ -83,7 +83,6 @@ The following subcommands are used in the form:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBstatus\fR\fR
 .ad
@@ -96,7 +95,6 @@ and the usage of TPM resources such as communication sessions and loaded keys.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinit\fR\fR
 .ad
@@ -111,7 +109,6 @@ it can be re-initialized.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBauth\fR\fR
 .ad
@@ -122,7 +119,6 @@ Change the owner authorization password for the TPM.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBclear\fR \fBlock\fR\fR
 .ad
@@ -137,7 +133,6 @@ count of failed attempts.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBclear\fR \fBowner\fR\fR
 .ad
@@ -152,7 +147,6 @@ TPM must be re-initialized using the \fBtpmadm init\fR command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBkeyinfo\fR [\fIuuid\fR]\fR
 .ad
@@ -166,7 +160,6 @@ displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdeletekey\fR \fIuuid\fR\fR
 .ad
@@ -183,7 +176,6 @@ After completing the requested operation, \fBtpmadm\fR exits with one of the
 following status values.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -194,7 +186,6 @@ Successful termination.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
@@ -205,7 +196,6 @@ Failure. The requested operation could not be completed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
@@ -222,13 +212,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/traceroute.1m b/usr/src/man/man1m/traceroute.1m
index 859f3aaaa0..1f2dcc1fcf 100644
--- a/usr/src/man/man1m/traceroute.1m
+++ b/usr/src/man/man1m/traceroute.1m
@@ -3,17 +3,17 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH traceroute 1M "18 Sep 2008" "SunOS 5.11" "System Administration Commands"
+.TH TRACEROUTE 1M "Sep 18, 2008"
 .SH NAME
 traceroute \- print the route packets take to network host
 .SH SYNOPSIS
 .LP
 .nf
-\fBtraceroute\fR [\fB-adFIlnSvx\fR] [\fB-A\fR \fIaddr_family\fR] [\fB-c\fR \fItraffic_class\fR] 
-     [\fB-f\fR \fIfirst_hop\fR] [\fB-g\fR \fIgateway\fR [\fB-g\fR \fIgateway\fR...] | \fB-r\fR] 
-     [\fB-i\fR \fIiface\fR] [\fB-L\fR \fIflow_label\fR] [\fB-m\fR \fImax_hop\fR] 
-     [\fB-P\fR \fIpause_sec\fR] [\fB-p\fR \fIport\fR] [\fB-Q\fR \fImax_timeout\fR] 
-     [\fB-q\fR \fInqueries\fR] [\fB-s\fR \fIsrc_addr\fR] [\fB-t\fR \fItos\fR] [\fB-w\fR \fIwait_time\fR] host 
+\fBtraceroute\fR [\fB-adFIlnSvx\fR] [\fB-A\fR \fIaddr_family\fR] [\fB-c\fR \fItraffic_class\fR]
+     [\fB-f\fR \fIfirst_hop\fR] [\fB-g\fR \fIgateway\fR [\fB-g\fR \fIgateway\fR...] | \fB-r\fR]
+     [\fB-i\fR \fIiface\fR] [\fB-L\fR \fIflow_label\fR] [\fB-m\fR \fImax_hop\fR]
+     [\fB-P\fR \fIpause_sec\fR] [\fB-p\fR \fIport\fR] [\fB-Q\fR \fImax_timeout\fR]
+     [\fB-q\fR \fInqueries\fR] [\fB-s\fR \fIsrc_addr\fR] [\fB-t\fR \fItos\fR] [\fB-w\fR \fIwait_time\fR] host
      [\fIpacketlen\fR]
 .fi
 
@@ -49,7 +49,6 @@ second timeout interval, an asterisk (\fB*\fR) is displayed for that probe. The
 annotations that may appear after the time are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB!\fR\fR
 .ad
@@ -60,7 +59,6 @@ the \fIttl\fR (\fIhop limit\fR) value in the received packet is \fB<= 1\fR\&.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB!H\fR\fR
 .ad
@@ -71,7 +69,6 @@ host unreachable.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB!X\fR\fR
 .ad
@@ -82,7 +79,6 @@ communication administratively prohibited.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB<!N>\fR\fR
 .ad
@@ -96,7 +92,6 @@ communication administratively prohibited.
 The following annotations appear only for IPv4:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB!F\fR\fR
 .ad
@@ -108,7 +103,6 @@ gateway is broken.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB!N\fR\fR
 .ad
@@ -119,7 +113,6 @@ network unreachable.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB!P\fR\fR
 .ad
@@ -130,7 +123,6 @@ protocol unreachable.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB!S\fR\fR
 .ad
@@ -142,7 +134,6 @@ routing.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB!T\fR\fR
 .ad
@@ -153,7 +144,6 @@ unreachable for the specified tos (type-of-service).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB!U\fR\fR
 .ad
@@ -167,7 +157,6 @@ source host isolated or precedence problem.
 The following annotations appear only for IPv6:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB!A\fR\fR
 .ad
@@ -178,7 +167,6 @@ host unreachable for a reason other than lack of an entry in the routing table.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB!B\fR\fR
 .ad
@@ -189,7 +177,6 @@ packet too big.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB!E\fR\fR
 .ad
@@ -200,7 +187,6 @@ destination is not a neighbor.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB!R\fR\fR
 .ad
@@ -233,7 +219,6 @@ hexadecimal notation. For example, \fIpacketlen\fR can be specified either as
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR\ \fIaddr_family\fR\fR
 .ad
@@ -261,7 +246,6 @@ will state that the host is unknown and exit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -278,7 +262,6 @@ address by sending a \fBSIGINT\fR, or exit \fBtraceroute\fR by sending a
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\ \fItraffic_class\fR\fR
 .ad
@@ -292,7 +275,6 @@ packet. This option is valid only on IPv6.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -303,7 +285,6 @@ Set the \fBSO_DEBUG\fR socket option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fR
 .ad
@@ -316,7 +297,6 @@ bit is always set in this case.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIfirst_hop\fR\fR
 .ad
@@ -329,7 +309,6 @@ intermediate gateways which are less than \fIfirst_hop\fR hops away.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR \fIgateway\fR\fR
 .ad
@@ -347,7 +326,6 @@ source route with this option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR\fR
 .ad
@@ -358,7 +336,6 @@ Use \fBICMP\fR (\fBICMP6\fR) \fBECHO\fR instead of \fBUDP\fR datagrams.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIiface\fR\fR
 .ad
@@ -374,7 +351,6 @@ for example, \fBeri0\fR, \fBhme0\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-L\fR\ \fIflow_label\fR\fR
 .ad
@@ -386,7 +362,6 @@ range from 0 to 1048575. This option is valid only on IPv6.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
@@ -398,7 +373,6 @@ received.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fImax_hop\fR\fR
 .ad
@@ -410,7 +384,6 @@ default is 30 hops, which is the same default used for \fBTCP \fR connections.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -422,7 +395,6 @@ saves a nameserver address-to-name lookup for each gateway found on the path.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIpause_sec\fR\fR
 .ad
@@ -436,7 +408,6 @@ received a reply. Note that \fIpause_sec\fR is a real number.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIport\fR\fR
 .ad
@@ -454,7 +425,6 @@ between the source and the destination.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Q\fR \fImax_timeout\fR\fR
 .ad
@@ -467,7 +437,6 @@ option if you have specified a large \fInqueries\fR probe count.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR \fInqueries\fR\fR
 .ad
@@ -478,7 +447,6 @@ Set the desired number of probe queries. The default is 3.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -493,7 +461,6 @@ You cannot use this option if the \fB-g\fR option is used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR\fR
 .ad
@@ -504,7 +471,6 @@ Display a summary of how many probes were not answered for each hop.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsrc_addr\fR\fR
 .ad
@@ -524,7 +490,6 @@ address do not have to match.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fItos\fR\fR
 .ad
@@ -538,7 +503,6 @@ the \fItos\fR value set in the probe packet. This option is valid only on IPv4.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -551,7 +515,6 @@ packets is displayed. Also \fBICMP\fR (\fBICMP6\fR) packets received other than
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-w\fR \fIwaittime\fR\fR
 .ad
@@ -563,7 +526,6 @@ seconds.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
@@ -574,7 +536,7 @@ required for the last hop when using \fBICMP\fR \fBECHO\fR probes. This option
 is valid only on IPv4. See the \fB-I\fR option.
 .sp
 When specified from within a shared-IP zone, this option has no effect as the
-checksum is always calculated by the operating 	system in this case.
+checksum is always calculated by the operating system in this case.
 .RE
 
 .SH OPERANDS
@@ -583,7 +545,6 @@ checksum is always calculated by the operating 	system in this case.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIhost\fR\fR
 .ad
@@ -636,15 +597,15 @@ sanfrancisco.
 .sp
 .in +2
 .nf
-istanbul% \fBtraceroute sanfrancisco\fR      
+istanbul% \fBtraceroute sanfrancisco\fR
 traceroute: Warning: Multiple interfaces found; using 172.31.86.247 @eri0
 traceroute to sanfrancisco (172.29.64.39), 30 hops max, 40 byte packets
-1  frbldg7c-86 (172.31.86.1)  1.516 ms  1.283 ms  1.362 ms      
-2  bldg1a-001 (172.31.1.211)  2.277 ms  1.773 ms  2.186 ms      
-3  bldg4-bldg1 (172.30.4.42)  1.978 ms  1.986 ms  13.996 ms      
-4  bldg6-bldg4 (172.30.4.49)  2.655 ms  3.042 ms  2.344 ms      
-5  ferbldg11a-001 (172.29.1.236)  2.636 ms  3.432 ms  3.830 ms      
-6  frbldg12b-153 (172.29.153.72)  3.452 ms  3.146 ms  2.962 ms      
+1  frbldg7c-86 (172.31.86.1)  1.516 ms  1.283 ms  1.362 ms
+2  bldg1a-001 (172.31.1.211)  2.277 ms  1.773 ms  2.186 ms
+3  bldg4-bldg1 (172.30.4.42)  1.978 ms  1.986 ms  13.996 ms
+4  bldg6-bldg4 (172.30.4.49)  2.655 ms  3.042 ms  2.344 ms
+5  ferbldg11a-001 (172.29.1.236)  2.636 ms  3.432 ms  3.830 ms
+6  frbldg12b-153 (172.29.153.72)  3.452 ms  3.146 ms  2.962 ms
 7  sanfrancisco (172.29.64.39)  3.430 ms  3.312 ms  3.451 ms
 .fi
 .in -2
@@ -678,7 +639,7 @@ traceroute to sanfrancisco (172.29.64.39), 30 hops max, 56 byte packets
 11  frbldg12b-153 (172.29.153.72)  9.634 ms
 12  sanfrancisco (172.29.64.39)  14.631 ms
 
- 
+
 .fi
 .in -2
 .sp
@@ -689,7 +650,6 @@ traceroute to sanfrancisco (172.29.64.39), 30 hops max, 56 byte packets
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -700,7 +660,6 @@ Successful operation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB>\fB0\fR\fR
 .ad
diff --git a/usr/src/man/man1m/trapstat.1m b/usr/src/man/man1m/trapstat.1m
index 1d6cc5831e..1c2b8f2263 100644
--- a/usr/src/man/man1m/trapstat.1m
+++ b/usr/src/man/man1m/trapstat.1m
@@ -3,14 +3,14 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH trapstat 1M "11 May 2004" "SunOS 5.11" "System Administration Commands"
+.TH TRAPSTAT 1M "May 11, 2004"
 .SH NAME
 trapstat \- report trap statistics
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/trapstat\fR [\fB-t\fR | \fB-T\fR | \fB-e\fR \fIentry\fR] 
-     [\fB-C\fR \fIprocessor_set_id\fR | \fB-c\fR \fIcpulist\fR] [\fB-P\fR] [\fB-a\fR] 
+\fB/usr/sbin/trapstat\fR [\fB-t\fR | \fB-T\fR | \fB-e\fR \fIentry\fR]
+     [\fB-C\fR \fIprocessor_set_id\fR | \fB-c\fR \fIcpulist\fR] [\fB-P\fR] [\fB-a\fR]
      [\fB-r\fR \fIrate\fR] [ [\fIinterval\fR [\fIcount\fR]] | \fIcommand\fR | [\fIargs\fR]]
 .fi
 
@@ -81,24 +81,20 @@ be specified.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 24n
-.rt  
 Displays the number of traps as accumulating, monotonically increasing values
 instead of per-second or per-interval rates.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcpulist\fR \fR
 .ad
 .RS 24n
-.rt  
 Enables \fBtrapstat\fR only on the \fBCPU\fRs specified by \fIcpulist\fR.
 .sp
 \fIcpulist\fR can be a single processor \fBID\fR (for example, \fB4\fR), a
@@ -109,12 +105,10 @@ list of processor\fB ID\fRs or processor \fBID\fR ranges (for example,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR \fIprocessor_set_id\fR \fR
 .ad
 .RS 24n
-.rt  
 Enables \fBtrapstat\fR only on the \fBCPU\fRs in the processor set specified by
 \fIprocessor_set_id\fR.
 .sp
@@ -127,12 +121,10 @@ most one processor set can be specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIentrylist\fR \fR
 .ad
 .RS 24n
-.rt  
 Enables \fBtrapstat\fR only for the trap table entry or entries specified by
 \fIentrylist\fR. A trap table entry can be specified by trap number or by trap
 name (for example, the level-10 trap can be specified as \fB74\fR, \fB0x4A\fR,
@@ -149,16 +141,14 @@ Manual.\fR If the parsable option (\fB-P\fR) is specified in addition to the
 
 .sp
 .TS
-tab();
-cw(2.75i) cw(2.75i) 
-lw(2.75i) lw(2.75i) 
-.
-FieldContents
-1Timestamp (nanoseconds since start)
-2CPU ID
-3Trap number (in hexadecimal)
-4Trap name
-5Trap rate per interval
+c c
+l l .
+Field	Contents
+1	Timestamp (nanoseconds since start)
+2	CPU ID
+3	Trap number (in hexadecimal)
+4	Trap name
+5	Trap rate per interval
 .TE
 
 Each field is separated with whitespace. If the format is modified, it will be
@@ -168,12 +158,10 @@ will remain unchanged.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fR
 .ad
 .RS 24n
-.rt  
 Lists trap table entries. By default, a table is displayed containing all valid
 trap numbers, their names and a brief description. The trap name is used in
 both the default output and in the \fIentrylist\fR parameter for the \fB-e\fR
@@ -183,27 +171,23 @@ argument. If the parsable option (\fB-P\fR) is specified in addition to the
 
 .sp
 .TS
-tab();
-cw(2.75i) cw(2.75i) 
-lw(2.75i) lw(2.75i) 
-.
-FieldContents
-1Trap number in hexadecimal
-2Trap number in decimal
-3Trap name 
-RemainingTrap description
+c c
+l l .
+Field	Contents
+1	Trap number in hexadecimal
+2	Trap number in decimal
+3	Trap name
+Remaining	Trap description
 .TE
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fR
 .ad
 .RS 24n
-.rt  
 Generates parsable output. When run without other data gathering modifying
 options (that is, \fB-e\fR, \fB-t\fR or \fB-T\fR), \fBtrapstat\fR's the
 parsable output has the following format:
@@ -211,16 +195,14 @@ parsable output has the following format:
 
 .sp
 .TS
-tab();
-cw(2.75i) cw(2.75i) 
-lw(2.75i) lw(2.75i) 
-.
-FieldContents
-1Timestamp (nanoseconds since start)
-2CPU ID
-3Trap number (in hexadecimal)
-4Trap name
-5Trap rate per interval
+c c
+l l .
+Field	Contents
+1	Timestamp (nanoseconds since start)
+2	CPU ID
+3	Trap number (in hexadecimal)
+4	Trap name
+5	Trap rate per interval
 .TE
 
 Each field is separated with whitespace. If the format is modified, it will be
@@ -230,12 +212,10 @@ will remain unchanged.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR \fIrate\fR \fR
 .ad
 .RS 24n
-.rt  
 Explicitly sets the sampling rate to be \fIrate\fR samples per second. If this
 option is specified, \fBtrapstat\fR's output changes from a traps-per-second to
 traps-per-sampling-interval.
@@ -243,12 +223,10 @@ traps-per-sampling-interval.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
 .RS 24n
-.rt  
 Enables TLB statistics.
 .sp
 A table is displayed with four principal columns of data: \fIitlb-miss\fR,
@@ -266,22 +244,20 @@ format of the data is as follows:
 
 .sp
 .TS
-tab();
-cw(0i) cw(5.5i) 
-lw(0i) lw(5.5i) 
-.
-FieldContents
-1Timestamp (nanoseconds since start)
-2CPU ID
-3Mode (\fBk\fR denotes kernel, \fBu\fR denotes user)
-4I-TLB misses
-5Percentage of time in I-TLB miss handler
-6I-TSB misses
-7Percentage of time in I-TSB miss handler
-8D-TLB misses
-9Percentage of time in D-TLB miss handler
-10D-TSB misses
-11Percentage of time in D-TSB miss handler
+c c
+l l .
+Field	Contents
+1	Timestamp (nanoseconds since start)
+2	CPU ID
+3	Mode (\fBk\fR denotes kernel, \fBu\fR denotes user)
+4	I-TLB misses
+5	Percentage of time in I-TLB miss handler
+6	I-TSB misses
+7	Percentage of time in I-TSB miss handler
+8	D-TLB misses
+9	Percentage of time in D-TLB miss handler
+10	D-TSB misses
+11	Percentage of time in D-TSB miss handler
 .TE
 
 Each field is separated with whitespace. If the format is modified, it will be
@@ -291,12 +267,10 @@ fields will remain unchanged.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fR
 .ad
 .RS 24n
-.rt  
 Enables \fBTLB\fR statistics, with page size information. As with the \fB-t\fR
 option, a table is displayed with four principal columns of data:
 \fIitlb-miss\fR, \fIitsb-miss\fR, \fIdtlb-miss\fR, and \fIdtsb-miss\fR. The
@@ -315,23 +289,21 @@ addition to the \fB-T\fR option, the format of the data is as follows:
 
 .sp
 .TS
-tab();
-cw(0i) cw(5.5i) 
-lw(0i) lw(5.5i) 
-.
-FieldContents
-1Timestamp (nanoseconds since start)
-2CPU ID
-3Mode \fBk\fR denotes kernel, \fBu\fR denotes user)
-4Page size, in decimal
-5I-TLB misses
-6Percentage of time in I-TLB miss handler
-7I-TSB misses
-8Percentage of time in I-TSB miss handler
-9D-TLB misses
-10Percentage of time in D-TLB miss handler
-11D-TSB misses
-12Percentage of time in D-TSB miss handler
+c c
+l l .
+Field	Contents
+1	Timestamp (nanoseconds since start)
+2	CPU ID
+3	Mode \fBk\fR denotes kernel, \fBu\fR denotes user)
+4	Page size, in decimal
+5	I-TLB misses
+6	Percentage of time in I-TLB miss handler
+7	I-TSB misses
+8	Percentage of time in I-TSB miss handler
+9	D-TLB misses
+10	Percentage of time in D-TLB miss handler
+11	D-TSB misses
+12	Percentage of time in D-TSB miss handler
 .TE
 
 Each field is separated with whitespace. If the format is modified, it will be
@@ -611,14 +583,13 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) cw(2.75i) 
-lw(2.75i) lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
-Interface Stability
-    Human Readable OutputUnstable
-    Parsable OutputEvolving
+box;
+c c
+l l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
+Interface Stability	
+    Human Readable Output	Unstable
+    Parsable Output	Evolving
 .TE
 
 .SH SEE ALSO
@@ -642,14 +613,12 @@ specifics of the hardware, the following table can be used as a rough guide:
 
 .sp
 .TS
-tab();
-cw(0i) cw(5.5i) 
-lw(0i) lw(5.5i) 
-.
-OptionApproximate probe effect
-default3-5% per trap
-\fB-e\fR3-5% per specified trap
-\fB-t\fR, \fB-T\fR T{
+c c
+l l .
+Option	Approximate probe effect
+default	3-5% per trap
+\fB-e\fR	3-5% per specified trap
+\fB-t\fR, \fB-T\fR 	T{
 40-45% per TLB miss trap hitting in the TSB, 25-30% per TLB miss trap missing in the TSB
 T}
 .TE
diff --git a/usr/src/man/man1m/ttyadm.1m b/usr/src/man/man1m/ttyadm.1m
index 7abc5b8c4e..15772190f7 100644
--- a/usr/src/man/man1m/ttyadm.1m
+++ b/usr/src/man/man1m/ttyadm.1m
@@ -4,14 +4,14 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ttyadm 1M "14 Sep 1992" "SunOS 5.11" "System Administration Commands"
+.TH TTYADM 1M "Sep 14, 1992"
 .SH NAME
 ttyadm \- format and output port monitor-specific information
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/ttyadm\fR [\fB-b\fR] [\fB-c\fR] [\fB-h\fR] [\fB-I\fR] [\fB-r\fR \fIcount\fR] [\fB-i\fR \fImsg\fR] 
-     [\fB-m\fR \fImodules\fR] [\fB-p\fR \fIprompt\fR] [\fB-t\fR \fItimeout\fR] [\fB-S\fR y | n] 
+\fB/usr/sbin/ttyadm\fR [\fB-b\fR] [\fB-c\fR] [\fB-h\fR] [\fB-I\fR] [\fB-r\fR \fIcount\fR] [\fB-i\fR \fImsg\fR]
+     [\fB-m\fR \fImodules\fR] [\fB-p\fR \fIprompt\fR] [\fB-t\fR \fItimeout\fR] [\fB-S\fR y | n]
      [\fB-T\fR \fItermtype\fR] \fB-d\fR \fIdevice\fR \fB-l\fR \fIttylabel\fR \fB-s\fR \fIservice\fR
 .fi
 
@@ -36,12 +36,10 @@ monitor-specific (\fBttymon\fR-specific) data to these commands.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR\fR
 .ad
 .RS 15n
-.rt  
 Set the ``bi-directional port'' flag. When this flag is set, the line can be
 used in both directions. \fBttymon\fR will allow users to connect to the
 service associated with the port, but if the port is free, \fBuucico\fR(1M),
@@ -50,12 +48,10 @@ service associated with the port, but if the port is free, \fBuucico\fR(1M),
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 15n
-.rt  
 Set the connect-on-carrier flag for the port. If the \fB-c\fR flag is set,
 \fBttymon\fR will invoke the port's associated service immediately when a
 connect indication is received (that is, no prompt is printed and no baud-rate
@@ -64,23 +60,19 @@ searching is done).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fI device\fR\fR
 .ad
 .RS 15n
-.rt  
 \fIdevice\fR is the full pathname of the device file for the TTY port.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 15n
-.rt  
 Set the hangup flag for the port. If the \fB-h\fR flag is not set, \fBttymon\fR
 will force a hangup on the line by setting the speed to \fB0\fR before setting
 the speed to the default or specified value.
@@ -88,12 +80,10 @@ the speed to the default or specified value.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fI message\fR\fR
 .ad
 .RS 15n
-.rt  
 Specify the inactive (disabled) response message. This message will be sent to
 the TTY port if the port is disabled or the \fBttymon\fR monitoring the port is
 disabled.
@@ -101,12 +91,10 @@ disabled.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR\fR
 .ad
 .RS 15n
-.rt  
 Initialize only.  If the \fB-I\fR option is used, \fBttymon\fR will invoke the
 service only once.  This can be used to configure a particular device without
 actually monitoring it, as with software carrier.
@@ -114,24 +102,20 @@ actually monitoring it, as with software carrier.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fI ttylabel\fR\fR
 .ad
 .RS 15n
-.rt  
 Specify which \fIttylabel\fR in the \fB/etc/ttydefs\fR file to use as the
 starting point when searching for the proper baud rate.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fI modules\fR\fR
 .ad
 .RS 15n
-.rt  
 Specify a list of pushable STREAMS modules. The modules will be pushed in the
 order in which they are specified before the service is invoked. \fImodules\fR
 must be a comma-separated list of modules, with no white space included. Any
@@ -141,23 +125,19 @@ pushed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fI prompt\fR\fR
 .ad
 .RS 15n
-.rt  
 Specify the prompt message, for example, ``\fBlogin:\fR''.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fI count\fR\fR
 .ad
 .RS 15n
-.rt  
 When the \fB-r\fR option is invoked, \fBttymon\fR will wait until it receives
 data from the port before it displays a prompt. If \fIcount\fR is \fB0\fR,
 \fBttymon\fR will wait until it receives any character. If \fIcount\fR is
@@ -167,12 +147,10 @@ been received.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fI service\fR\fR
 .ad
 .RS 15n
-.rt  
 \fIservice\fR is the full pathname of the service to be invoked when a
 connection request is received. If arguments are required, the command and its
 arguments must be enclosed in double quotes (" ").
@@ -180,48 +158,40 @@ arguments must be enclosed in double quotes (" ").
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR \fBy|n\fR\fR
 .ad
 .RS 15n
-.rt  
 Set the software carrier value.  \fBy\fR will turn software carrier on. \fBn\fR
 will turn software carrier off.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fI timeout\fR\fR
 .ad
 .RS 15n
-.rt  
 Specify that \fBttymon\fR should close a port if the open on the port succeeds,
 and no input data is received in \fItimeout\fR seconds.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR\fI termtype\fR\fR
 .ad
 .RS 15n
-.rt  
 Set the terminal type.  The \fBTERM\fR environment variable will be set to
 \fItermtype\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
 .RS 15n
-.rt  
 Display the version number of the current \fB/usr/lib/saf/ttymon\fR command.
 .RE
 
@@ -236,13 +206,11 @@ error and \fBttymon\fR will exit with a non-zero status.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/ttydefs\fR\fR
 .ad
 .RS 16n
-.rt  
- 
+
 .RE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ttymon.1m b/usr/src/man/man1m/ttymon.1m
index 33d0dc1565..bf36448ff9 100644
--- a/usr/src/man/man1m/ttymon.1m
+++ b/usr/src/man/man1m/ttymon.1m
@@ -1,22 +1,22 @@
 '\" te
-.\" Copyright 1989 AT&T  
+.\" Copyright 1989 AT&T
 .\" Copyright (C) 2004, Sun Microsystems, Inc.
 .\" All Rights Reserved
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ttymon 1M "22 Feb 2005" "SunOS 5.11" "System Administration Commands"
+.TH TTYMON 1M "Feb 22, 2005"
 .SH NAME
 ttymon \- port monitor for terminal ports
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/saf/ttymon\fR 
+\fB/usr/lib/saf/ttymon\fR
 .fi
 
 .LP
 .nf
-\fB/usr/lib/saf/ttymon\fR \fB-g\fR [\fB-d\fR \fIdevice\fR] [\fB-h\fR] [\fB-t\fR \fItimeout\fR] 
+\fB/usr/lib/saf/ttymon\fR \fB-g\fR [\fB-d\fR \fIdevice\fR] [\fB-h\fR] [\fB-t\fR \fItimeout\fR]
      [\fB-l\fR \fIttylabel\fR] [\fB-p\fR \fIprompt\fR] [\fB-m\fR \fImodules\fR] [\fB-T\fR \fItermtype\fR]
 .fi
 
@@ -157,12 +157,10 @@ If there are no entries for the \fBttymon\fR service, then the entries for the
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR\fR
 .ad
 .RS 14n
-.rt  
 A special invocation of \fBttymon\fR is provided with the \fB-g\fR option. This
 form of the command should only be called by applications that need to set the
 correct baud rate and terminal settings on a port and then connect to
@@ -172,12 +170,10 @@ following combinations of options can be used with \fB-g\fR:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fIdevice\fR\fR
 .ad
 .RS 14n
-.rt  
 \fIdevice\fR is the full path name of the port to which \fBttymon\fR is to
 attach. If this option is not specified, file descriptor \fB0\fR must be set up
 by the invoking process to a TTY port.
@@ -185,12 +181,10 @@ by the invoking process to a TTY port.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 14n
-.rt  
 If the -h flag is not set, \fBttymon\fR will force a hangup on the line by
 setting the speed to zero before setting the speed to the default or specified
 speed.
@@ -198,12 +192,10 @@ speed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fIttylabel\fR\fR
 .ad
 .RS 14n
-.rt  
 \fIttylabel\fR is a link to a speed and TTY definition in the \fBttydefs\fR
 file. This definition tells \fBttymon\fR at what speed to run initially, what
 the initial TTY settings are, and what speed to try next if the user indicates
@@ -213,12 +205,10 @@ that the speed is inappropriate by pressing the BREAK key. The default speed is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fImodules\fR\fR
 .ad
 .RS 14n
-.rt  
 When initializing the port, \fBttymon\fR will pop all modules on the port, and
 then push \fImodules\fR in the order specified. \fImodules\fR is a
 comma-separated list of pushable modules. Default modules on the ports are
@@ -227,35 +217,29 @@ usually set up by the Autopush Facility.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fIprompt\fR\fR
 .ad
 .RS 14n
-.rt  
 Allows the user to specify a prompt string. The default prompt is \fBLogin:\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fItimeout\fR\fR
 .ad
 .RS 14n
-.rt  
 Specifies that \fBttymon\fR should exit if no one types anything in
 \fItimeout\fR seconds after the prompt is sent.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR\fItermtype\fR\fR
 .ad
 .RS 14n
-.rt  
 Sets the \fBTERM\fR environment variable to \fItermtype\fR.
 .RE
 
@@ -290,12 +274,10 @@ none of the above variables is set in the environment, the "C" (U.S. style)
 locale determines how \fBttymon\fR behaves.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLC_CTYPE\fR\fR
 .ad
 .RS 12n
-.rt  
 Determines how \fBttymon\fR handles characters. When \fBLC_CTYPE\fR is set to a
 valid value, \fBttymon\fR can display and handle text and filenames containing
 valid characters for that locale. \fBttymon\fR can display and handle Extended
@@ -307,13 +289,11 @@ widths. In the "C" locale, only characters from ISO 8859-1 are valid.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/logindevperm\fR\fR
 .ad
 .RS 21n
-.rt  
- 
+
 .RE
 
 .sp
diff --git a/usr/src/man/man1m/tunefs.1m b/usr/src/man/man1m/tunefs.1m
index 5bb31d4752..7f522f43fa 100644
--- a/usr/src/man/man1m/tunefs.1m
+++ b/usr/src/man/man1m/tunefs.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH tunefs 1M "5 Dec 2003" "SunOS 5.11" "System Administration Commands"
+.TH TUNEFS 1M "Dec 5, 2003"
 .SH NAME
 tunefs \- tune an existing UFS file system
 .SH SYNOPSIS
 .LP
 .nf
-\fBtunefs\fR [\fB-a\fR \fImaxcontig\fR] [\fB-d\fR \fIrotdelay\fR] [\fB-e\fR \fImaxbpg\fR] 
+\fBtunefs\fR [\fB-a\fR \fImaxcontig\fR] [\fB-d\fR \fIrotdelay\fR] [\fB-e\fR \fImaxbpg\fR]
      [\fB-m\fR \fIminfree\fR] [\fB-o\fR space | time] \fIspecial\fR | \fIfilesystem\fR
 .fi
 
@@ -26,12 +26,10 @@ changed are indicated by the options given below.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR \fImaxcontig\fR\fR
 .ad
 .RS 21n
-.rt  
 The maximum number of logical blocks, belonging to one file, that is allocated
 contiguously. The default is calculated as follows:
 .sp
@@ -57,24 +55,20 @@ hardware supports.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIrotdelay\fR\fR
 .ad
 .RS 21n
-.rt  
 This parameter is obsolete as of the Solaris 10 release. The value is always
 set to \fB0\fR, regardless of the input value.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fImaxbpg\fR\fR
 .ad
 .RS 21n
-.rt  
 Indicates the maximum number of contiguous logical blocks any single file can
 allocate from a cylinder group before it is forced to begin allocating blocks
 from another cylinder group. Typically this value is set to approximately one
@@ -91,12 +85,10 @@ parameter should be set higher.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fIminfree\fR\fR
 .ad
 .RS 21n
-.rt  
 Specifies the minimum free space threshold, or the percentage of space held
 back from normal users. This value can be set to \fB0\fR. However, up to a
 factor of three in throughput will be lost over the performance obtained at a
@@ -107,12 +99,10 @@ deleted to get under the higher threshold.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fI space\fR\||\|\fItime\fR\fR
 .ad
 .RS 21n
-.rt  
 The file system can either be instructed to try to minimize the \fBtime\fR
 spent allocating blocks, or to try to minimize the \fBspace\fR fragmentation on
 the disk. The default is \fItime\fR.
diff --git a/usr/src/man/man1m/txzonemgr.1m b/usr/src/man/man1m/txzonemgr.1m
index 1b597f43ee..e3d6a0c9ab 100644
--- a/usr/src/man/man1m/txzonemgr.1m
+++ b/usr/src/man/man1m/txzonemgr.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH txzonemgr 1M "17 Dec 2007" "SunOS 5.11" "System Administration Commands"
+.TH TXZONEMGR 1M "Dec 17, 2007"
 .SH NAME
 txzonemgr \- Trusted Extensions Zone Manager Configuration Utility
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/txzonemgr\fR 
+\fB/usr/sbin/txzonemgr\fR
 .fi
 
 .SH DESCRIPTION
@@ -33,15 +33,14 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Command Interface Stability Committed 
+Command Interface Stability 	Committed
 _
-Interactive DialogueNot an Interface
+Interactive Dialogue	Not an Interface
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/tzselect.1m b/usr/src/man/man1m/tzselect.1m
index fd6428f71e..13e91a6e12 100644
--- a/usr/src/man/man1m/tzselect.1m
+++ b/usr/src/man/man1m/tzselect.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH tzselect 1M "6 Sep 2001" "SunOS 5.11" "System Administration Commands"
+.TH TZSELECT 1M "Sep 6, 2001"
 .SH NAME
 tzselect \- select a time zone
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/bin/tzselect\fR 
+\fB/usr/bin/tzselect\fR
 .fi
 
 .SH DESCRIPTION
@@ -31,35 +31,29 @@ The \fBtzselect\fR command has no options.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR \fR
 .ad
 .RS 6n
-.rt  
 Timezone information was successfully obtained.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/share/lib/zoneinfo\fR \fR
 .ad
 .RS 28n
-.rt  
 directory containing timezone data files
 .RE
 
@@ -71,13 +65,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-StabilityEvolving
+Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/uadmin.1m b/usr/src/man/man1m/uadmin.1m
index 3909069ed8..a8fd33e910 100644
--- a/usr/src/man/man1m/uadmin.1m
+++ b/usr/src/man/man1m/uadmin.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH uadmin 1M "25 Mar 2009" "SunOS 5.11" "System Administration Commands"
+.TH UADMIN 1M "Mar 25, 2009"
 .SH NAME
 uadmin \- administrative control
 .SH SYNOPSIS
diff --git a/usr/src/man/man1m/ucodeadm.1m b/usr/src/man/man1m/ucodeadm.1m
index d57a4c7858..997a7dd9e3 100644
--- a/usr/src/man/man1m/ucodeadm.1m
+++ b/usr/src/man/man1m/ucodeadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ucodeadm 1M "10 Jul 2007" "SunOS 5.11" "System Administration Commands"
+.TH UCODEADM 1M "Jul 10, 2007"
 .SH NAME
 ucodeadm \- update processor microcode
 .SH SYNOPSIS
@@ -34,36 +34,30 @@ The \fImicrocode-text-file\fR can be obtained from processor vendors.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 26n
-.rt  
 Report microcode revision.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fImicrocode-text-file\fR\fR
 .ad
 .RS 26n
-.rt  
 Update microcode on all cross-call interrupt ready processors.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fImicrocode-text-file\fR\fR
 .ad
 .RS 26n
-.rt  
-Install microcode files on target system to be used during the next 	boot
-cycle. The text file name must have the vendor name prefix, 	such as
+Install microcode files on target system to be used during the next boot
+cycle. The text file name must have the vendor name prefix, such as
 "\fBintel\fR" or "\fBamd\fR".
 .sp
 By default the microcode files will be installed at:
@@ -80,12 +74,10 @@ where \fBVENDORSTR\fR is either "\fBGenuineIntel\fR" or "\fBAuthenticAMD\fR".
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIalternate path\fR\fR
 .ad
 .RS 26n
-.rt  
 Install \fImicrocode\fR path in the \fIalternate path\fR.
 .RE
 
@@ -145,23 +137,19 @@ system, the installed microcode file is not used on the next boot cycle.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB0\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB>0\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -173,13 +161,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ufsdump.1m b/usr/src/man/man1m/ufsdump.1m
index 887a67d310..85edc0e155 100644
--- a/usr/src/man/man1m/ufsdump.1m
+++ b/usr/src/man/man1m/ufsdump.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ufsdump 1M "17 Mar 2008" "SunOS 5.11" "System Administration Commands"
+.TH UFSDUMP 1M "Mar 17, 2008"
 .SH NAME
 ufsdump \- incremental file system dump
 .SH SYNOPSIS
@@ -57,7 +57,6 @@ older version of the \fBrestore\fR command.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\(mi9\fR\fR
 .ad
@@ -74,7 +73,6 @@ files modified or added since the "level \fB2\fR" (Monday) backup. A "level
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBa\fR \fIarchive_file\fR\fR
 .ad
@@ -87,7 +85,6 @@ file is in the dump file that is being restored.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBb\fR \fIfactor\fR\fR
 .ad
@@ -104,7 +101,6 @@ with \fBtar\fR(1).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBc\fR\fR
 .ad
@@ -121,7 +117,6 @@ with this option, their values will override the defaults set by this option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBd\fR \fIbpi\fR\fR
 .ad
@@ -134,7 +129,6 @@ cartridge tape, in which case it is assumed to be 1000BPI per track. Typical
 values for tape devices are:
 .sp
 .ne 2
-.mk
 .na
 \fB1/2 inch tape\fR
 .ad
@@ -145,7 +139,6 @@ values for tape devices are:
 
 .sp
 .ne 2
-.mk
 .na
 \fB1/4 inch cartridge\fR
 .ad
@@ -159,7 +152,6 @@ values for tape devices are:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBD\fR\fR
 .ad
@@ -170,7 +162,6 @@ Diskette. Dump to diskette.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBf\fR \fIdump_file\fR\fR
 .ad
@@ -193,7 +184,6 @@ remote machine.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBl\fR\fR
 .ad
@@ -208,7 +198,6 @@ another tape and wait.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBL\fR \fIstring\fR\fR
 .ad
@@ -223,7 +212,6 @@ is specific to the \fBufsdump\fR tape format, and bears no resemblance to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBn\fR\fR
 .ad
@@ -238,7 +226,6 @@ logged in.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBN\fR \fIdevice_name\fR\fR
 .ad
@@ -252,7 +239,6 @@ contain no white space as defined in \fBscanf\fR(3C) and is case-sensitive.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBo\fR\fR
 .ad
@@ -267,7 +253,6 @@ overwriting the media.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBs\fR \fIsize\fR\fR
 .ad
@@ -283,7 +268,6 @@ cartridge). Typical values for tape devices depend on the \fBc\fR option, for
 cartridge devices, and the \fBD\fR option for diskettes:
 .sp
 .ne 2
-.mk
 .na
 \fB1/2 inch tape\fR
 .ad
@@ -294,7 +278,6 @@ cartridge devices, and the \fBD\fR option for diskettes:
 
 .sp
 .ne 2
-.mk
 .na
 \fB60-Mbyte 1/4 inch cartridge\fR
 .ad
@@ -305,7 +288,6 @@ cartridge devices, and the \fBD\fR option for diskettes:
 
 .sp
 .ne 2
-.mk
 .na
 \fB150-Mbyte 1/4 inch cartridge\fR
 .ad
@@ -316,7 +298,6 @@ cartridge devices, and the \fBD\fR option for diskettes:
 
 .sp
 .ne 2
-.mk
 .na
 \fBdiskette\fR
 .ad
@@ -330,7 +311,6 @@ for bad block information.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBS\fR\fR
 .ad
@@ -344,7 +324,6 @@ media will be needed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBt\fR \fItracks\fR\fR
 .ad
@@ -356,7 +335,6 @@ option is not compatible with the \fBD\fR option. Values for Sun-supported tape
 devices are:
 .sp
 .ne 2
-.mk
 .na
 \fB60-Mbyte 1/4 inch cartridge\fR
 .ad
@@ -367,7 +345,6 @@ devices are:
 
 .sp
 .ne 2
-.mk
 .na
 \fB150-Mbyte 1/4 inch cartridge\fR
 .ad
@@ -380,7 +357,6 @@ devices are:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBT\fR \fItime_wait\fR\fB[hms]\fR\fR
 .ad
@@ -395,7 +371,6 @@ default unit is minutes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBu\fR\fR
 .ad
@@ -408,7 +383,6 @@ file system successfully dumped that includes the file system name (or
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBv\fR\fR
 .ad
@@ -423,7 +397,6 @@ standard output.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBw\fR\fR
 .ad
@@ -437,7 +410,6 @@ ignored. After reporting, \fBufsdump\fR exits immediately.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBW\fR\fR
 .ad
@@ -455,7 +427,6 @@ that have not been backed up within a day are highlighted.
 The following operand is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfiles_to_dump\fR\fR
 .ad
@@ -523,7 +494,6 @@ While running, \fBufsdump\fR emits many verbose messages. \fBufsdump\fR returns
 the following exit values:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -534,7 +504,6 @@ Normal exit.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
@@ -545,7 +514,6 @@ Startup errors encountered.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
@@ -557,7 +525,6 @@ Abort \(mi no checkpoint attempted.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/rmt/0\fR\fR
 .ad
@@ -568,7 +535,6 @@ default unit to dump to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dumpdates\fR\fR
 .ad
@@ -579,7 +545,6 @@ dump date record
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/group\fR\fR
 .ad
@@ -590,7 +555,6 @@ to find group \fBsys\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/hosts\fR\fR
 .ad
@@ -601,7 +565,6 @@ to gain access to remote system with drive
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vfstab\fR\fR
 .ad
diff --git a/usr/src/man/man1m/ufsrestore.1m b/usr/src/man/man1m/ufsrestore.1m
index 4edbef1531..22a74d6ecd 100644
--- a/usr/src/man/man1m/ufsrestore.1m
+++ b/usr/src/man/man1m/ufsrestore.1m
@@ -4,14 +4,14 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ufsrestore 1M "24 Sep 2002" "SunOS 5.11" "System Administration Commands"
+.TH UFSRESTORE 1M "Sep 24, 2002"
 .SH NAME
 ufsrestore \- incremental file system restore
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/ufsrestore\fR i | r | R | t | x [abcdfhlmostvyLT] 
-     [\fIarchive_file\fR] [\fIfactor\fR] [\fIdumpfile\fR] [\fIn\fR] [\fIlabel\fR] 
+\fB/usr/sbin/ufsrestore\fR i | r | R | t | x [abcdfhlmostvyLT]
+     [\fIarchive_file\fR] [\fIfactor\fR] [\fIdumpfile\fR] [\fIn\fR] [\fIlabel\fR]
      [\fItimeout\fR] [\fIfilename\fR]...
 .fi
 
@@ -49,12 +49,10 @@ directory. The \fBR\fR function is intended for restoring into a populated
 directory.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBi\fR\fR
 .ad
 .RS 5n
-.rt  
 Interactive. After reading in the directory information from the media,
 \fBufsrestore\fR invokes a shell-like interface that allows you to browse
 through the dump file's directory hierarchy and select individual files to be
@@ -64,12 +62,10 @@ extracted. Restoration has the same semantics as \fBx\fR (see below). See
 
 .sp
 .ne 2
-.mk
 .na
 \fBr\fR
 .ad
 .RS 5n
-.rt  
 Recursive. Starting with an empty directory and a level 0 dump, the \fBr\fR
 function recreates the filesystem relative to the current working directory,
 exactly as it appeared when the dump was made. Information used to restore
@@ -86,12 +82,10 @@ they are preserved.
 
 .sp
 .ne 2
-.mk
 .na
 \fBR\fR
 .ad
 .RS 5n
-.rt  
 Resume restoring. If an \fBr\fR-mode \fBufsrestore\fR was interrupted, this
 function prompts for the volume from which to resume restoring and continues
 the restoration from where it was left off.  Otherwise identical to \fBr\fR.
@@ -99,12 +93,10 @@ the restoration from where it was left off.  Otherwise identical to \fBr\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBt\fR
 .ad
 .RS 5n
-.rt  
 Table of contents. List each \fIfilename\fR that appears on the media. If no
 \fIfilename\fR argument is given, the root directory is listed. This results in
 a list of all files on the media, unless the \fBh\fR function modifier is in
@@ -115,12 +107,10 @@ modifier is mutually exclusive with the \fBx\fR and \fBr\fR function letters.
 
 .sp
 .ne 2
-.mk
 .na
 \fBx\fR
 .ad
 .RS 5n
-.rt  
 Extract the named files from the media. Files are restored to the same relative
 locations that they had in the original file system.
 .sp
@@ -144,12 +134,10 @@ definition) not entire file systems.
 .SS "Function Modifiers"
 .sp
 .ne 2
-.mk
 .na
 \fBa \fIarchive_file\fR\fR
 .ad
 .RS 19n
-.rt  
 Read the table of contents from \fIarchive_file\fR instead of the media. This
 function modifier can be used in combination with the \fBt\fR, \fBi\fR, or
 \fBx\fR function letters, making it possible to check whether files are on the
@@ -160,12 +148,10 @@ the file(s) before extracting them.
 
 .sp
 .ne 2
-.mk
 .na
 \fBb \fIfactor\fR\fR
 .ad
 .RS 19n
-.rt  
 Blocking factor. Specify the blocking factor for tape reads. For variable
 length \fBSCSI\fR tape devices, unless the data was written with the default
 blocking factor, a blocking factor at least as great as that used to write the
@@ -176,35 +162,29 @@ maximum blocking factor.
 
 .sp
 .ne 2
-.mk
 .na
 \fBc\fR
 .ad
 .RS 19n
-.rt  
 Convert the contents of the media in 4.1BSD format to the new \fBufs\fR file
 system format.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBd\fR
 .ad
 .RS 19n
-.rt  
 Debug. Turn on debugging output.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBf \fIdump_file\fR\fR
 .ad
 .RS 19n
-.rt  
 Use \fIdump_file\fR instead of \fB/dev/rmt/0\fR as the file to restore from.
 Typically \fIdump_file\fR specifies a tape or diskette drive. If
 \fIdump_file\fR is specified as `\fB\(mi\fR\&', \fBufsrestore\fR reads from the
@@ -232,24 +212,20 @@ access the remote machine.
 
 .sp
 .ne 2
-.mk
 .na
 \fBh\fR
 .ad
 .RS 19n
-.rt  
 Extract or list the actual directory, rather than the files that it references.
 This prevents hierarchical restoration of complete subtrees from the tape.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBl\fR
 .ad
 .RS 19n
-.rt  
 Autoload. When the end-of-tape is reached before the restore is complete, take
 the drive off-line and wait up to two minutes (the default, see the \fBT\fR
 function modifier) for the tape drive to be ready again. This gives autoloading
@@ -259,12 +235,10 @@ within two minutes, continue. If it is not, prompt for another tape and wait.
 
 .sp
 .ne 2
-.mk
 .na
 \fBL \fIlabel\fR\fR
 .ad
 .RS 19n
-.rt  
 The label that should appear in the header of the dump file. If the labels do
 not match, \fBufsrestore\fR issues a diagnostic and exits. The tape label is
 specific to the \fBufsdump\fR tape format, and bears no resemblance to
@@ -273,12 +247,10 @@ specific to the \fBufsdump\fR tape format, and bears no resemblance to
 
 .sp
 .ne 2
-.mk
 .na
 \fBm\fR
 .ad
 .RS 19n
-.rt  
 Extract by inode numbers rather than by filename to avoid regenerating complete
 pathnames. Regardless of where the files are located in the dump hierarchy,
 they are restored into the current directory and renamed with their inode
@@ -287,12 +259,10 @@ number. This is useful if only a few files are being extracted.
 
 .sp
 .ne 2
-.mk
 .na
 \fBo\fR
 .ad
 .RS 19n
-.rt  
 Offline. Take the drive off-line when the restore is complete or the
 end-of-media is reached and rewind the tape, or eject the diskette. In the case
 of some autoloading 8mm drives, the tape is removed from the drive
@@ -301,12 +271,10 @@ automatically.
 
 .sp
 .ne 2
-.mk
 .na
 \fBs \fIn\fR\fR
 .ad
 .RS 19n
-.rt  
 Skip to the \fIn\fRth file when there are multiple dump files on the same tape.
 For example, the command:
 .sp
@@ -331,12 +299,10 @@ because on some devices absolute positioning is very time consuming.
 
 .sp
 .ne 2
-.mk
 .na
 \fBT timeout [hms]\fR
 .ad
 .RS 19n
-.rt  
 Sets the amount of time to wait for an autoload command to complete. This
 function modifier is ignored unless the \fBl\fR function modifier has also been
 specified. The default timeout period is two minutes. The time units may be
@@ -346,24 +312,20 @@ specified as a trailing \fBh\fR (hours), \fBm\fR (minutes), or \fBs\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fBv\fR
 .ad
 .RS 19n
-.rt  
 Verbose. \fBufsrestore\fR displays the name and inode number of each file it
 restores, preceded by its file type.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBy\fR
 .ad
 .RS 19n
-.rt  
 Do not ask whether to abort the restore in the event of tape errors.
 \fBufsrestore\fR tries to skip over the bad tape block(s) and continue as best
 it can.
@@ -378,12 +340,10 @@ that accept an argument, the default is the current directory. The interactive
 options are:
 .sp
 .ne 2
-.mk
 .na
 \fBadd [\fIfilename\fR]\fR
 .ad
 .RS 22n
-.rt  
 Add the named file or directory to the list of files to extract. If a directory
 is specified, add that directory and its files (recursively) to the extraction
 list (unless the \fBh\fR modifier is in effect).
@@ -391,23 +351,19 @@ list (unless the \fBh\fR modifier is in effect).
 
 .sp
 .ne 2
-.mk
 .na
 \fBcd \fIdirectory\fR\fR
 .ad
 .RS 22n
-.rt  
 Change to \fIdirectory\fR (within the dump file).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBdelete [\fIfilename\fR]\fR
 .ad
 .RS 22n
-.rt  
 Delete the current directory, or the named file or directory from the list of
 files to extract. If a directory is specified, delete that directory and all
 its descendents from the extraction list (unless the \fBh\fR modifier is in
@@ -418,12 +374,10 @@ to omit.
 
 .sp
 .ne 2
-.mk
 .na
 \fBextract\fR
 .ad
 .RS 22n
-.rt  
 Extract all files on the extraction list from the dump media. \fBufsrestore\fR
 asks which volume the user wishes to mount. The fastest way to extract a small
 number of files is to start with the last volume and work toward the first. If
@@ -433,23 +387,19 @@ positioned to file \fIn\fR when it is read.
 
 .sp
 .ne 2
-.mk
 .na
 \fBhelp\fR
 .ad
 .RS 22n
-.rt  
 Display a summary of the available commands.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBls [\fIdirectory\fR]\fR
 .ad
 .RS 22n
-.rt  
 List files in \fIdirectory\fR or the current directory, represented by a
 `\fB\&.\fR' (period). Directories are appended with a `\fB/\fR' (slash).
 Entries marked for extraction are prefixed with a `\fB*\fR' (asterisk). If the
@@ -458,23 +408,19 @@ verbose option is in effect, inode numbers are also listed.
 
 .sp
 .ne 2
-.mk
 .na
 \fBmarked [\fIdirectory\fR]\fR
 .ad
 .RS 22n
-.rt  
 Like \fBls\fR, except only files marked for extraction are listed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBpager\fR
 .ad
 .RS 22n
-.rt  
 Toggle the pagination of the output from the \fBls\fR and \fBmarked\fR
 commands. The pager used is that defined by the \fBPAGER\fR environment
 variable, or more(1) if that envar is not defined. The \fBPAGER\fR envar may
@@ -483,34 +429,28 @@ include white-space-separated arguments for the pagination program.
 
 .sp
 .ne 2
-.mk
 .na
 \fBpwd\fR
 .ad
 .RS 22n
-.rt  
 Print the full pathname of the current working directory.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBquit\fR
 .ad
 .RS 22n
-.rt  
 \fBufsrestore\fR exits immediately, even if the extraction list is not empty.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBsetmodes\fR
 .ad
 .RS 22n
-.rt  
 Prompts: \fBset owner/mode for\fR `\fB\&.\fR' (period). Type \fBy\fR for yes to
 set the mode (permissions, owner, times) of the current directory `\fB\&.\fR'
 (period) into which files are being restored equal to the mode of the root
@@ -524,12 +464,10 @@ the files were dumped.
 
 .sp
 .ne 2
-.mk
 .na
 \fBsetpager \fIcommand\fR\fR
 .ad
 .RS 22n
-.rt  
 Sets the command to use for paginating output instead of the default or that
 inherited from the environment. The \fIcommand\fR string may include arguments
 in addition to the command itself.
@@ -537,12 +475,10 @@ in addition to the command itself.
 
 .sp
 .ne 2
-.mk
 .na
 \fBverbose\fR
 .ad
 .RS 22n
-.rt  
 Toggle the status of the \fBv\fR modifier. While \fBv\fR is in effect, the
 \fBls\fR command lists the inode numbers of all entries, and \fBufsrestore\fR
 displays information about each file as it is extracted.
@@ -550,12 +486,10 @@ displays information about each file as it is extracted.
 
 .sp
 .ne 2
-.mk
 .na
 \fBwhat\fR
 .ad
 .RS 22n
-.rt  
 Display the dump header on the media.
 .RE
 
@@ -565,12 +499,10 @@ Display the dump header on the media.
 The following operands are supported.
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfilename\fR\fR
 .ad
 .RS 12n
-.rt  
 Specifies the pathname of files (or directories) to be restored to disk. Unless
 the \fBh\fR function modifier is also used, a directory name refers to the
 files it contains, and (recursively) its subdirectories and the files they
@@ -589,47 +521,39 @@ when encountering files greater than or equal to 2 Gbyte ( 2^31 bytes).
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 An error occurred. Verbose messages are displayed.
 .RE
 
 .SH ENVIRONMENT VARIABLES
 .sp
 .ne 2
-.mk
 .na
 \fBPAGER\fR
 .ad
 .RS 10n
-.rt  
 The command to use as a filter for paginating output. This can also be used to
 specify the options to be used. Default is \fBmore\fR(1).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBTMPDIR\fR
 .ad
 .RS 10n
-.rt  
 Selects the directory for temporary files. Defaults to \fB/tmp\fR if not
 defined in the environment.
 .RE
@@ -637,45 +561,37 @@ defined in the environment.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/dev/rmt/0\fR\fR
 .ad
 .RS 23n
-.rt  
 the default tape drive
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB$TMPDIR/rstdir*\fR\fR
 .ad
 .RS 23n
-.rt  
 file containing directories on the tape
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB$TMPDIR/rstmode*\fR\fR
 .ad
 .RS 23n
-.rt  
 owner, mode, and timestamps for directories
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\&./restoresymtable\fR\fR
 .ad
 .RS 23n
-.rt  
 information passed between incremental restores
 .RE
 
@@ -706,7 +622,6 @@ Most checks are self-explanatory or can "never happen". Common errors are given
 below.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBConverting to new file system format\fR\fR
 .ad
@@ -718,7 +633,6 @@ automatically converted to the new file system format.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfilename\fR\fB: not found on tape\fR\fR
 .ad
@@ -732,7 +646,6 @@ the \fBr\fR function.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBexpected next file\fR \fIinumber\fR\fB, got\fR \fIinumber\fR\fR
 .ad
@@ -744,7 +657,6 @@ using a dump tape created on an active file system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBIncremental tape too low\fR\fR
 .ad
@@ -756,7 +668,6 @@ incremental tape, or that has too low an incremental level has been loaded.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBIncremental tape too high\fR\fR
 .ad
@@ -769,7 +680,6 @@ level has been loaded.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmedia\fR \fBread\fR \fBerror:\fR \fBinvalid\fR \fBargument\fR\fR
 .ad
@@ -781,7 +691,6 @@ write data.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTape read error while restoring\fR\fR
 .ad
@@ -806,7 +715,6 @@ extracted files have been corrupted, though files may not be found on the tape.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBresync ufsrestore, skipped\fR \fInum\fR\fR
 .ad
@@ -818,7 +726,6 @@ This message lists the number of blocks that were skipped over.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBIncorrect tape label. Expected `foo', got `bar'.\fR\fR
 .ad
diff --git a/usr/src/man/man1m/unshare.1m b/usr/src/man/man1m/unshare.1m
index e94cef40b4..8a1d8f9806 100644
--- a/usr/src/man/man1m/unshare.1m
+++ b/usr/src/man/man1m/unshare.1m
@@ -4,13 +4,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH unshare 1M "23 Jan 2007" "SunOS 5.11" "System Administration Commands"
+.TH UNSHARE 1M "Jan 23, 2007"
 .SH NAME
 unshare \- make local resource unavailable for mounting by remote systems
 .SH SYNOPSIS
 .LP
 .nf
-\fBunshare\fR [\fB-p\fR] [\fB-F\fR \fIFSType\fR] [\fB-o\fR \fIspecific_options\fR] 
+\fBunshare\fR [\fB-p\fR] [\fB-F\fR \fIFSType\fR] [\fB-o\fR \fIspecific_options\fR]
      [\fIpathname\fR | \fIresourcename\fR]
 .fi
 
@@ -25,7 +25,6 @@ as the default. \fISpecific_options\fR, as well as the semantics of
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fIFSType\fR\fR
 .ad
@@ -36,7 +35,6 @@ Specify the file system type.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIspecific_options\fR\fR
 .ad
@@ -47,7 +45,6 @@ Specify options specific to the file system provided by the \fB-F\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
@@ -59,7 +56,6 @@ Remove resource from shared status in a way that persists across reboots.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dfs/fstypes\fR\fR
 .ad
@@ -70,7 +66,6 @@ Lists distributed file system utilities packages installed on the system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dfs/sharetab\fR\fR
 .ad
diff --git a/usr/src/man/man1m/unshare_nfs.1m b/usr/src/man/man1m/unshare_nfs.1m
index 1ecf8b3f7d..beb8c529c4 100644
--- a/usr/src/man/man1m/unshare_nfs.1m
+++ b/usr/src/man/man1m/unshare_nfs.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH unshare_nfs 1M "6 May 2003" "SunOS 5.11" "System Administration Commands"
+.TH UNSHARE_NFS 1M "May 6, 2003"
 .SH NAME
 unshare_nfs \- make local NFS file systems unavailable for mounting by remote
 systems
@@ -26,12 +26,10 @@ the \fIFSType\fR in the file \fB/etc/dfs/sharetab\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fR
 .ad
 .RS 6n
-.rt  
 This option may be omitted if NFS is the first file system type listed in the
 file \fB/etc/dfs/fstypes\fR.
 .RE
@@ -39,23 +37,19 @@ file \fB/etc/dfs/fstypes\fR.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dfs/fstypes\fR\fR
 .ad
 .RS 22n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/dfs/sharetab \fR\fR
 .ad
 .RS 22n
-.rt  
 
 .RE
 
diff --git a/usr/src/man/man1m/update_drv.1m b/usr/src/man/man1m/update_drv.1m
index 519feaae8b..e4070bbde1 100644
--- a/usr/src/man/man1m/update_drv.1m
+++ b/usr/src/man/man1m/update_drv.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH update_drv 1M "10 Feb 2009" "SunOS 5.11" "System Administration Commands"
+.TH UPDATE_DRV 1M "Feb 10, 2009"
 .SH NAME
 update_drv \- modify device driver attributes
 .SH SYNOPSIS
@@ -14,13 +14,13 @@ update_drv \- modify device driver attributes
 
 .LP
 .nf
-\fBupdate_drv\fR [\fB-b\fR \fIbasedir\fR] [\fB-f\fR | \fB-v\fR] [\fB-n\fR] \fB-a\fR [\fB-m\fR '\fIpermission\fR'] 
+\fBupdate_drv\fR [\fB-b\fR \fIbasedir\fR] [\fB-f\fR | \fB-v\fR] [\fB-n\fR] \fB-a\fR [\fB-m\fR '\fIpermission\fR']
      [\fB-i\fR '\fIidentify-name\fR'] [\fB-P\fR '\fIprivilege\fR'] [\fB-p\fR '\fIpolicy\fR'] \fIdriver_module\fR
 .fi
 
 .LP
 .nf
-\fBupdate_drv\fR [\fB-b\fR \fIbasedir\fR] [\fB-f\fR | \fB-v\fR] [\fB-n\fR] \fB-d\fR [\fB-m\fR '\fIpermission\fR'] 
+\fBupdate_drv\fR [\fB-b\fR \fIbasedir\fR] [\fB-f\fR | \fB-v\fR] [\fB-n\fR] \fB-d\fR [\fB-m\fR '\fIpermission\fR']
      [\fB-i\fR '\fIidentify-name\fR'] [\fB-P\fR '\fIprivilege\fR'] [\fB-p\fR '\fIpolicy\fR'] \fIdriver_module\fR
 .fi
 
@@ -49,7 +49,6 @@ do not get modified.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -70,7 +69,6 @@ The \fB-a\fR and \fB-d\fR options are mutually exclusive.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR \fIbasedir\fR\fR
 .ad
@@ -91,7 +89,6 @@ zone's file system. See \fBzones\fR(5).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -111,7 +108,6 @@ If the entry doesn't exist \fBupdate_drv\fR returns an error.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -129,7 +125,6 @@ such devices remain.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR '\fIidentify-name\fR'\fR
 .ad
@@ -143,7 +138,6 @@ recommended.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR '\fIpermission\fR'\fR
 .ad
@@ -156,7 +150,6 @@ then, this option is ignored. The permission string is mandatory.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -168,7 +161,6 @@ configuration files for that driver.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR '\fIpolicy\fR'\fR
 .ad
@@ -183,7 +175,6 @@ is., no wildcard matching is performed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR '\fIprivilege\fR'\fR
 .ad
@@ -197,7 +188,6 @@ file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -302,7 +292,6 @@ example#   update_drv -a -i '"/pci@8,600000/SUNW,qlc@4"' qlt
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -313,7 +302,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB>\fB0\fR\fR
 .ad
diff --git a/usr/src/man/man1m/updatehome.1m b/usr/src/man/man1m/updatehome.1m
index 497cc4058d..2d97934d39 100644
--- a/usr/src/man/man1m/updatehome.1m
+++ b/usr/src/man/man1m/updatehome.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH updatehome 1M "20 Jul 2007" "SunOS 5.11" "System Administration Commands"
+.TH UPDATEHOME 1M "Jul 20, 2007"
 .SH NAME
 updatehome \- update the home directory copy and link files for the current
 label
@@ -33,35 +33,29 @@ to those to be symbolically linked (\fB\&.link_files\fR).
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 6n
-.rt  
 Replace existing home-directory copies at the current label. The default is to
 skip over existing copies.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 6n
-.rt  
 Ignore errors encountered. The default aborts on error.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 6n
-.rt  
 Replace existing home-directory copies or symbolic links at the current label.
 This option implies options \fB-c\fR and \fB-s\fR. The default is to skip over
 existing copies or symbolic links.
@@ -69,12 +63,10 @@ existing copies or symbolic links.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 6n
-.rt  
 Replace existing home-directory symbolic links at the current label. The
 default is to skip over existing symbolic links.
 .RE
@@ -95,8 +87,8 @@ user's label.
 .sp
 .in +2
 .nf
-\&.cshrc 
-\&.mailrc 
+\&.cshrc
+\&.mailrc
 \&.mozilla/bookmarks.html
 .fi
 .in -2
@@ -140,23 +132,19 @@ No privileges are required to run the command.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB$HOME/.copy_files\fR\fR
 .ad
 .RS 21n
-.rt  
 List of files to be copied
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB$HOME/.link_files\fR\fR
 .ad
 .RS 21n
-.rt  
 List of files to be symbolically linked
 .RE
 
@@ -168,13 +156,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/updatemedia.1m b/usr/src/man/man1m/updatemedia.1m
index 0c6118eb54..db782ece2b 100644
--- a/usr/src/man/man1m/updatemedia.1m
+++ b/usr/src/man/man1m/updatemedia.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH updatemedia 1M "23 Sep 2009" "SunOS 5.11" "System Administration Commands"
+.TH UPDATEMEDIA 1M "Sep 23, 2009"
 .SH NAME
 updatemedia \- modify Solaris media with patches and packages
 .SH SYNOPSIS
@@ -46,7 +46,6 @@ be burned onto a CD/DVD with utilities such as \fBcdrw\fR(1) or
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fImedia-root\fR\fR
 .ad
@@ -58,7 +57,6 @@ option must be specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIiso\fR\fR
 .ad
@@ -69,7 +67,6 @@ Create a Solaris ISO image of \fImedia-root\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlabel\fR\fR
 .ad
@@ -82,7 +79,6 @@ Label/volume name of the ISO image (if \fB-o\fR option is specified). If
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -97,7 +93,6 @@ Verbose. Multiple \fB-v\fR options increase verbosity.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpkg_or_patch\fR [\fIpkg_or_patch\fR ...]\fR
 .ad
@@ -132,13 +127,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/useradd.1m b/usr/src/man/man1m/useradd.1m
index b8462ad5da..6829f782b4 100644
--- a/usr/src/man/man1m/useradd.1m
+++ b/usr/src/man/man1m/useradd.1m
@@ -4,25 +4,25 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH useradd 1M "19 Feb 2008" "SunOS 5.11" "System Administration Commands"
+.TH USERADD 1M "Feb 19, 2008"
 .SH NAME
 useradd \- administer a new user login on the system
 .SH SYNOPSIS
 .LP
 .nf
-\fBuseradd\fR [\fB-A\fR \fIauthorization\fR [,\fIauthorization...\fR]] 
-     [\fB-b\fR \fIbase_dir\fR] [\fB-c\fR \fIcomment\fR] [\fB-d\fR \fIdir\fR] [\fB-e\fR \fIexpire\fR] 
-     [\fB-f\fR \fIinactive\fR] [\fB-g\fR \fIgroup\fR] [\fB-G\fR \fIgroup\fR [,\fIgroup\fR]...] 
-     [\fB-K\fR \fIkey=value\fR] [\fB-m\fR [\fB-k\fR \fIskel_dir\fR]] [\fB-p\fR \fIprojname\fR] 
-     [\fB-P\fR \fIprofile\fR [,\fIprofile...\fR]] [\fB-R\fR \fIrole\fR [,\fIrole...\fR]] 
+\fBuseradd\fR [\fB-A\fR \fIauthorization\fR [,\fIauthorization...\fR]]
+     [\fB-b\fR \fIbase_dir\fR] [\fB-c\fR \fIcomment\fR] [\fB-d\fR \fIdir\fR] [\fB-e\fR \fIexpire\fR]
+     [\fB-f\fR \fIinactive\fR] [\fB-g\fR \fIgroup\fR] [\fB-G\fR \fIgroup\fR [,\fIgroup\fR]...]
+     [\fB-K\fR \fIkey=value\fR] [\fB-m\fR [\fB-k\fR \fIskel_dir\fR]] [\fB-p\fR \fIprojname\fR]
+     [\fB-P\fR \fIprofile\fR [,\fIprofile...\fR]] [\fB-R\fR \fIrole\fR [,\fIrole...\fR]]
      [\fB-s\fR \fIshell\fR] [\fB-u\fR \fIuid\fR [\fB-o\fR]] \fIlogin\fR
 .fi
 
 .LP
 .nf
-\fBuseradd\fR \fB-D\fR [\fB-A\fR \fIauthorization\fR [,\fIauthorization...\fR]] 
-     [\fB-b\fR \fIbase_dir\fR] [\fB-s\fR \fIshell\fR [\fB-k\fR \fIskel_dir\fR]] [\fB-e\fR \fIexpire\fR] 
-     [\fB-f\fR \fIinactive\fR] [\fB-g\fR \fIgroup\fR] [\fB-K\fR \fIkey=value\fR] [\fB-p\fR \fIprojname\fR] 
+\fBuseradd\fR \fB-D\fR [\fB-A\fR \fIauthorization\fR [,\fIauthorization...\fR]]
+     [\fB-b\fR \fIbase_dir\fR] [\fB-s\fR \fIshell\fR [\fB-k\fR \fIskel_dir\fR]] [\fB-e\fR \fIexpire\fR]
+     [\fB-f\fR \fIinactive\fR] [\fB-g\fR \fIgroup\fR] [\fB-K\fR \fIkey=value\fR] [\fB-p\fR \fIprojname\fR]
      [\fB-P\fR \fIprofile\fR [,\fIprofile...\fR]] [\fB-R\fR \fIrole\fR [,\fIrole...\fR]]
 .fi
 
@@ -65,7 +65,6 @@ met. See \fBpasswd\fR(4) for the requirements for usernames.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR \fIauthorization\fR\fR
 .ad
@@ -78,7 +77,6 @@ an account.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR \fIbase_dir\fR\fR
 .ad
@@ -91,7 +89,6 @@ exist unless the \fB-m\fR option or the \fB-d\fR option is also specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcomment\fR\fR
 .ad
@@ -104,7 +101,6 @@ stored in the user's \fB/etc/passwd\fR entry.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdir\fR\fR
 .ad
@@ -117,7 +113,6 @@ for new login home directories and \fIaccount_name\fR is the new login name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
@@ -131,7 +126,6 @@ Display the default values for \fBgroup\fR, \fBbase_dir\fR, \fBskel_dir\fR,
 values are:
 .sp
 .ne 2
-.mk
 .na
 \fBgroup\fR
 .ad
@@ -142,7 +136,6 @@ values are:
 
 .sp
 .ne 2
-.mk
 .na
 \fBbase_dir\fR
 .ad
@@ -153,7 +146,6 @@ values are:
 
 .sp
 .ne 2
-.mk
 .na
 \fBskel_dir\fR
 .ad
@@ -164,7 +156,6 @@ values are:
 
 .sp
 .ne 2
-.mk
 .na
 \fBshell\fR
 .ad
@@ -175,7 +166,6 @@ values are:
 
 .sp
 .ne 2
-.mk
 .na
 \fBinactive\fR
 .ad
@@ -186,7 +176,6 @@ values are:
 
 .sp
 .ne 2
-.mk
 .na
 \fBexpire\fR
 .ad
@@ -197,7 +186,6 @@ null
 
 .sp
 .ne 2
-.mk
 .na
 \fBauths\fR
 .ad
@@ -208,7 +196,6 @@ null
 
 .sp
 .ne 2
-.mk
 .na
 \fBprofiles\fR
 .ad
@@ -219,7 +206,6 @@ null
 
 .sp
 .ne 2
-.mk
 .na
 \fBproj\fR
 .ad
@@ -230,7 +216,6 @@ null
 
 .sp
 .ne 2
-.mk
 .na
 \fBprojname\fR
 .ad
@@ -241,7 +226,6 @@ null
 
 .sp
 .ne 2
-.mk
 .na
 \fBkey=value (pairs defined in \fBuser_attr\fR(4)\fR
 .ad
@@ -252,7 +236,6 @@ not present
 
 .sp
 .ne 2
-.mk
 .na
 \fBroles\fR
 .ad
@@ -265,7 +248,6 @@ null
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIexpire\fR\fR
 .ad
@@ -284,7 +266,6 @@ creating temporary logins.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIinactive\fR\fR
 .ad
@@ -297,7 +278,6 @@ The maximum number of days allowed between uses of a login ID before that
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR \fIgroup\fR\fR
 .ad
@@ -312,7 +292,6 @@ allocation by the Solaris Operating System.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-G\fR \fIgroup\fR\fR
 .ad
@@ -327,7 +306,6 @@ Operating System.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-K\fR \fIkey=value\fR\fR
 .ad
@@ -343,7 +321,6 @@ option. Keys may not be repeated.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR \fIskel_dir\fR\fR
 .ad
@@ -357,7 +334,6 @@ this purpose.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
@@ -370,7 +346,6 @@ directory already exists, it must have read, write, and execute permissions by
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
@@ -381,7 +356,6 @@ This option allows a \fBUID\fR to be duplicated (non-unique).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIprofile\fR\fR
 .ad
@@ -392,7 +366,6 @@ One or more comma-separated execution profiles defined in \fBprof_attr\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIprojname\fR\fR
 .ad
@@ -404,7 +377,6 @@ Name of the project with which the added user is associated. See the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIrole\fR\fR
 .ad
@@ -416,7 +388,6 @@ Roles cannot be assigned to other roles.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIshell\fR\fR
 .ad
@@ -429,7 +400,6 @@ value of \fIshell\fR must be a valid executable file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIuid\fR\fR
 .ad
@@ -473,13 +443,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
@@ -513,7 +482,7 @@ is not unique:
 .sp
 .in +2
 .nf
-UX: useradd: ERROR: uid \fIuid\fR is already in use. Choose another. 
+UX: useradd: ERROR: uid \fIuid\fR is already in use. Choose another.
 .fi
 .in -2
 .sp
@@ -525,7 +494,7 @@ is already in use:
 .sp
 .in +2
 .nf
-UX: useradd: ERROR: group \fIgroup\fR does not exist. Choose another. 
+UX: useradd: ERROR: group \fIgroup\fR does not exist. Choose another.
 .fi
 .in -2
 .sp
diff --git a/usr/src/man/man1m/userdel.1m b/usr/src/man/man1m/userdel.1m
index 080fdad62a..9d40e6cf73 100644
--- a/usr/src/man/man1m/userdel.1m
+++ b/usr/src/man/man1m/userdel.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH userdel 1M "8 Sep 1999" "SunOS 5.11" "System Administration Commands"
+.TH USERDEL 1M "Sep 8, 1999"
 .SH NAME
 userdel \- delete a user's login from the system
 .SH SYNOPSIS
@@ -24,12 +24,10 @@ appropriate account-related changes to the system file and file system.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 6n
-.rt  
 Remove the user's home directory from the system. This directory must exist.
 The files and directories under the home directory will no longer be accessible
 following successful execution of the command.
@@ -41,12 +39,10 @@ following successful execution of the command.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fIlogin\fR\fR\fR
 .ad
 .RS 9n
-.rt  
 An existing login name to be deleted.
 .RE
 
@@ -56,114 +52,94 @@ An existing login name to be deleted.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 6n
-.rt  
 Invalid command syntax. A usage message for the \fBuserdel\fR command is
 displayed.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB6\fR\fR
 .ad
 .RS 6n
-.rt  
 The account to be removed does not exist.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB8\fR\fR
 .ad
 .RS 6n
-.rt  
 The account to be removed is in use.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB10\fR\fR
 .ad
 .RS 6n
-.rt  
 Cannot update the \fB/etc/group\fR or \fB/etc/user_attr\fR file but the login
 is removed from the \fB/etc/passwd\fR file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB12\fR\fR
 .ad
 .RS 6n
-.rt  
 Cannot remove or otherwise modify the home directory.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/passwd\fR\fR
 .ad
 .RS 18n
-.rt  
 system password file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/shadow\fR\fR
 .ad
 .RS 18n
-.rt  
 system file contain users' encrypted passwords and related information
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/group\fR\fR
 .ad
 .RS 18n
-.rt  
 system file containing group definitions
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/user_attr\fR\fR
 .ad
 .RS 18n
-.rt  
 system file containing additional user attributes
 .RE
 
diff --git a/usr/src/man/man1m/usermod.1m b/usr/src/man/man1m/usermod.1m
index 4d9dfb1326..46f4f9992b 100644
--- a/usr/src/man/man1m/usermod.1m
+++ b/usr/src/man/man1m/usermod.1m
@@ -3,17 +3,17 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH usermod 1M "22 Feb 2008" "SunOS 5.11" "System Administration Commands"
+.TH USERMOD 1M "Feb 22, 2008"
 .SH NAME
 usermod \- modify a user's login information on the system
 .SH SYNOPSIS
 .LP
 .nf
-\fBusermod\fR [\fB-u\fR \fIuid\fR [\fB-o\fR]] [\fB-g\fR \fIgroup\fR] [\fB-G\fR \fIgroup\fR [, \fIgroup\fR...]] 
-     [\fB-d\fR \fIdir\fR [\fB-m\fR]] [\fB-s\fR \fIshell\fR] [\fB-c\fR \fIcomment\fR] [\fB-l\fR \fInew_name\fR] 
-     [\fB-f\fR \fIinactive\fR] [\fB-e\fR \fIexpire\fR] 
-     [\fB-A\fR \fIauthorization\fR [, \fIauthorization\fR]] 
-     [\fB-P\fR \fIprofile\fR [, \fIprofile\fR]] [\fB-R\fR \fIrole\fR [, \fIrole\fR]] 
+\fBusermod\fR [\fB-u\fR \fIuid\fR [\fB-o\fR]] [\fB-g\fR \fIgroup\fR] [\fB-G\fR \fIgroup\fR [, \fIgroup\fR...]]
+     [\fB-d\fR \fIdir\fR [\fB-m\fR]] [\fB-s\fR \fIshell\fR] [\fB-c\fR \fIcomment\fR] [\fB-l\fR \fInew_name\fR]
+     [\fB-f\fR \fIinactive\fR] [\fB-e\fR \fIexpire\fR]
+     [\fB-A\fR \fIauthorization\fR [, \fIauthorization\fR]]
+     [\fB-P\fR \fIprofile\fR [, \fIprofile\fR]] [\fB-R\fR \fIrole\fR [, \fIrole\fR]]
      [\fB-K\fR \fIkey=value\fR] \fIlogin\fR
 .fi
 
@@ -34,7 +34,6 @@ this limit.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-A\fR \fIauthorization\fR\fR
 .ad
@@ -48,7 +47,6 @@ no authorization list is specified, the existing setting is removed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcomment\fR\fR
 .ad
@@ -62,7 +60,6 @@ entry.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdir\fR\fR
 .ad
@@ -75,7 +72,6 @@ home directories, and \fBlogin\fR is the new login.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR \fIexpire\fR\fR
 .ad
@@ -92,7 +88,6 @@ For example, you may enter \fB10/6/90\fR or \fBOctober 6, 1990\fR. A value of
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIinactive\fR\fR
 .ad
@@ -105,7 +100,6 @@ integers. A value of \fB0\fR defeats the status.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-g\fR \fIgroup\fR\fR
 .ad
@@ -117,7 +111,6 @@ redefines the user's primary group membership.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-G\fR \fIgroup\fR\fR
 .ad
@@ -131,7 +124,6 @@ redefines the user's supplementary group membership. Duplicates between
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-K\fR \fIkey=value\fR\fR
 .ad
@@ -159,7 +151,6 @@ present.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fInew_logname\fR\fR
 .ad
@@ -171,7 +162,6 @@ requirements for usernames.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
@@ -185,7 +175,6 @@ group.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
@@ -196,7 +185,6 @@ This option allows the specified \fBUID\fR to be duplicated (non-unique).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-P\fR \fIprofile\fR\fR
 .ad
@@ -209,7 +197,6 @@ profile list is specified, the existing setting is removed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIrole\fR\fR
 .ad
@@ -222,7 +209,6 @@ removed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIshell\fR\fR
 .ad
@@ -234,7 +220,6 @@ login. The value of \fIshell\fR must be a valid executable file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIuid\fR\fR
 .ad
@@ -253,7 +238,6 @@ manually reassigned using \fBchown\fR(1).
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlogin\fR\fR
 .ad
@@ -391,7 +375,6 @@ In case of an error, \fBusermod\fR prints an error message and exits with one
 of the following values:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
@@ -403,7 +386,6 @@ is displayed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
@@ -414,7 +396,6 @@ An invalid argument was provided to an option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB4\fR\fR
 .ad
@@ -425,7 +406,6 @@ The \fIuid\fR given with the \fB-u\fR option is already in use.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB5\fR\fR
 .ad
@@ -437,7 +417,6 @@ possible errors. See \fBpasswd\fR(4).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB6\fR\fR
 .ad
@@ -449,7 +428,6 @@ login shell does not exist.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB8\fR\fR
 .ad
@@ -460,7 +438,6 @@ The login to be modified is in use.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB9\fR\fR
 .ad
@@ -471,7 +448,6 @@ The \fInew_logname\fR is already in use.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB10\fR\fR
 .ad
@@ -483,7 +459,6 @@ requests will be implemented.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB11\fR\fR
 .ad
@@ -495,7 +470,6 @@ requests will be implemented.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB12\fR\fR
 .ad
@@ -507,7 +481,6 @@ Unable to complete the move of the home directory to the new home directory.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/group\fR\fR
 .ad
@@ -518,7 +491,6 @@ system file containing group definitions
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/datemsk\fR\fR
 .ad
@@ -529,7 +501,6 @@ system file of date formats
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/passwd\fR\fR
 .ad
@@ -540,7 +511,6 @@ system password file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/shadow\fR\fR
 .ad
@@ -551,7 +521,6 @@ system file containing users' encrypted passwords and related information
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/user_attr\fR\fR
 .ad
@@ -568,13 +537,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/utmpd.1m b/usr/src/man/man1m/utmpd.1m
index 7e69d8db20..ded08a039e 100644
--- a/usr/src/man/man1m/utmpd.1m
+++ b/usr/src/man/man1m/utmpd.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH utmpd 1M "4 Jun 2008" "SunOS 5.11" "System Administration Commands"
+.TH UTMPD 1M "Jun 4, 2008"
 .SH NAME
 utmpd \- utmpx monitoring daemon
 .SH SYNOPSIS
@@ -31,7 +31,6 @@ its table.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-debug\fR\fR
 .ad
@@ -47,7 +46,6 @@ Write debugging information to standard output.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -58,7 +56,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
@@ -70,7 +67,6 @@ An error occurred.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/utmpd\fR\fR
 .ad
@@ -80,7 +76,6 @@ You can set default values for the flags listed below. For example:
 \fBSCAN_PERIOD=600\fR
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSCAN_PERIOD\fR\fR
 .ad
@@ -92,7 +87,6 @@ see if monitored processes are still alive. The default is 300.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBMAX_FDS\fR\fR
 .ad
@@ -104,7 +98,6 @@ default value is 4096.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBWTMPX_UPDATE_FREQ\fR\fR
 .ad
@@ -120,7 +113,6 @@ unavailable. The default is 60.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/utmpx\fR\fR
 .ad
@@ -132,7 +124,6 @@ File containing user and accounting information for commands such as
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/proc\fR\fR
 .ad
diff --git a/usr/src/man/man1m/uucheck.1m b/usr/src/man/man1m/uucheck.1m
index d2f9ff9ef0..655fb535b6 100644
--- a/usr/src/man/man1m/uucheck.1m
+++ b/usr/src/man/man1m/uucheck.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH uucheck 1M "18 May 1993" "SunOS 5.11" "System Administration Commands"
+.TH UUCHECK 1M "May 18, 1993"
 .SH NAME
 uucheck \- check the uucp directories and permissions file
 .SH SYNOPSIS
@@ -28,24 +28,20 @@ be used by the super-user or \fBuucp\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 18n
-.rt  
 Give a detailed (verbose) explanation of how the  \fBuucp\fR programs will
 interpret the \fBPermissions\fR file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fI debug-level\fR\fR
 .ad
 .RS 18n
-.rt  
 Produce debugging output on the standard output. \fIdebug-level\fR is a number
 from \fB0\fR to \fB9\fR.  Higher numbers give more detailed debugging
 information.
@@ -54,78 +50,64 @@ information.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/uucp/Devices\fR\fR
 .ad
 .RS 27n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/uucp/Limits\fR\fR
 .ad
 .RS 27n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/uucp/Permissions\fR\fR
 .ad
 .RS 27n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/uucp/Systems\fR\fR
 .ad
 .RS 27n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/spool/locks/*\fR\fR
 .ad
 .RS 27n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/spool/uucp/*\fR\fR
 .ad
 .RS 27n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/spool/uucppublic/*\fR\fR
 .ad
 .RS 27n
-.rt  
 
 .RE
 
diff --git a/usr/src/man/man1m/uucico.1m b/usr/src/man/man1m/uucico.1m
index fffadc6965..6eaf2120a0 100644
--- a/usr/src/man/man1m/uucico.1m
+++ b/usr/src/man/man1m/uucico.1m
@@ -3,14 +3,14 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH uucico 1M "19 May 1993" "SunOS 5.11" "System Administration Commands"
+.TH UUCICO 1M "May 19, 1993"
 .SH NAME
 uucico \- file transport program for the uucp system
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/uucp/uucico\fR [\fB-f\fR] [\fB-c\fR \fItype\fR] [\fB-d\fR \fIspool-directory\fR] 
-     [\fB-i\fR \fIinterface\fR] [\fB-r\fR \fIrole-number\fR] [\fB-s\fR \fIsystem-name\fR] 
+\fB/usr/lib/uucp/uucico\fR [\fB-f\fR] [\fB-c\fR \fItype\fR] [\fB-d\fR \fIspool-directory\fR]
+     [\fB-i\fR \fIinterface\fR] [\fB-r\fR \fIrole-number\fR] [\fB-s\fR \fIsystem-name\fR]
      [\fB-x\fR \fIdebug-level\fR]
 .fi
 
@@ -24,24 +24,20 @@ uucico \- file transport program for the uucp system
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 22n
-.rt  
 This option is used to "force execution" of \fBuucico\fR by ignoring the limit
 on the maximum number of uucicos defined in the \fB/etc/uucp/Limits\fR file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fI type\fR\fR
 .ad
 .RS 22n
-.rt  
 The first field in the \fBDevices\fR file is the "Type" field.  The \fB-c\fR
 option forces \fBuucico\fR to only use entries in the "Type" field that match
 the user specified \fBtype\fR. The specified \fBtype\fR is usually the name of
@@ -50,12 +46,10 @@ a local area network.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fI spool-directory\fR\fR
 .ad
 .RS 22n
-.rt  
 This option specifies the directory \fIspool-directory\fR that contains the
 \fBuucp\fR work files to be transferred.  The default spool directory is
 \fB/var/spool/uucp\fR.
@@ -63,12 +57,10 @@ This option specifies the directory \fIspool-directory\fR that contains the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fI interface\fR\fR
 .ad
 .RS 22n
-.rt  
 This option defines the \fIinterface\fR used with \fBuucico\fR. The interface
 only affects slave mode.  Known interfaces are UNIX (default), TLI (basic
 Transport Layer Interface), and TLIS (Transport Layer Interface with Streams
@@ -77,12 +69,10 @@ modules, read/write).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fI role-number\fR\fR
 .ad
 .RS 22n
-.rt  
 The \fIrole-number\fR \fB1\fR is used for master mode. \fIrole-number\fR
 \fB0\fR is used for slave mode (default).  When \fBuucico\fR is started by a
 program or \fBcron\fR, \fIrole-number\fR \fB1\fR should be used for master
@@ -91,12 +81,10 @@ mode.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fI system-name\fR\fR
 .ad
 .RS 22n
-.rt  
 The \fB-s\fR option defines the remote system (\fIsystem-name\fR) that
 \fBuucico\fR will try to contact.  It is required when the role is master;
 \fIsystem-name\fR must be defined in the \fBSystems\fR file.
@@ -104,12 +92,10 @@ The \fB-s\fR option defines the remote system (\fIsystem-name\fR) that
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fI debug-level\fR\fR
 .ad
 .RS 22n
-.rt  
 Both \fBuux\fR and \fBuucp\fR queue jobs that will be transferred by
 \fBuucico\fR. These jobs are normally started by the \fBuusched\fR scheduler,
 for debugging purposes, and can be started manually. For example, the shell
@@ -121,100 +107,82 @@ debugging information.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/uucp/Devconfig\fR\fR
 .ad
 .RS 27n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/uucp/Devices\fR\fR
 .ad
 .RS 27n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/uucp/Limits\fR\fR
 .ad
 .RS 27n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/uucp/Permissions\fR\fR
 .ad
 .RS 27n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/uucp/Sysfiles\fR\fR
 .ad
 .RS 27n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/uucp/Systems\fR\fR
 .ad
 .RS 27n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/spool/locks/*\fR\fR
 .ad
 .RS 27n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/spool/uucp/*\fR\fR
 .ad
 .RS 27n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/spool/uucppublic/*\fR\fR
 .ad
 .RS 27n
-.rt  
 
 .RE
 
diff --git a/usr/src/man/man1m/uucleanup.1m b/usr/src/man/man1m/uucleanup.1m
index af1522b42e..21b559cdfa 100644
--- a/usr/src/man/man1m/uucleanup.1m
+++ b/usr/src/man/man1m/uucleanup.1m
@@ -4,13 +4,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH uucleanup 1M "19 May 1993" "SunOS 5.11" "System Administration Commands"
+.TH UUCLEANUP 1M "May 19, 1993"
 .SH NAME
 uucleanup \- uucp spool directory clean-up
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/uucp/uucleanup\fR [\fB-C\fR\fItime\fR] [\fB-D\fR\fItime\fR] [\fB-m\fR\fIstring\fR] 
+\fB/usr/lib/uucp/uucleanup\fR [\fB-C\fR\fItime\fR] [\fB-D\fR\fItime\fR] [\fB-m\fR\fIstring\fR]
      [\fB-o\fR\fItime\fR] [\fB-s\fR\fIsystem\fR] [\fB-W\fR\fItime\fR] [\fB-x\fR\fIdebug-level\fR] [\fB-X\fR\fItime\fR]
 .fi
 
@@ -57,24 +57,20 @@ should be started by \fBcron\fR(1M).
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR\fBtime\fR\fR
 .ad
 .RS 17n
-.rt  
 Remove any \fBC.\fR files greater or equal to \fBtime\fR days old and send
 appropriate information to the requester (default 7 days).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fBtime\fR\fR
 .ad
 .RS 17n
-.rt  
 Remove any \fBD.\fR files greater or equal to \fBtime\fR days old, make an
 attempt to deliver mail messages, and execute  \fBrnews\fR when appropriate
 (default 7 days).
@@ -82,46 +78,38 @@ attempt to deliver mail messages, and execute  \fBrnews\fR when appropriate
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fIstring\fR\fR
 .ad
 .RS 17n
-.rt  
 Include \fIstring\fR in the warning message generated by the \fB-W\fR option.
 The default line is "See your local administrator to locate the problem".
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fBtime\fR\fR
 .ad
 .RS 17n
-.rt  
 Delete other files whose age is more than \fBtime\fR days (default 2 days).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fIsystem\fR\fR
 .ad
 .RS 17n
-.rt  
 Execute for \fIsystem\fR spool directory only.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-W\fR\fBtime\fR\fR
 .ad
 .RS 17n
-.rt  
 Any \fBC.\fR files equal to \fBtime\fR days old will cause a mail message to be
 sent to the requester warning about the delay in contacting the remote. The
 message includes the \fIJOBID\fR, and in the case of mail, the mail message.
@@ -131,12 +119,10 @@ problem (\fB-m\fR option) (default 1 day).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fIdebug-level\fR\fR
 .ad
 .RS 17n
-.rt  
 Produce debugging output on standard ouput. \fIdebug-level\fR is a single digit
 between 0 and 9; higher numbers give more detailed debugging information. (This
 option may not be available on all systems.)
@@ -144,12 +130,10 @@ option may not be available on all systems.)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-X\fR\fBtime\fR\fR
 .ad
 .RS 17n
-.rt  
 Any \fBX.\fR files greater or equal to \fBtime\fR days old will be removed. The
 \fBD.\fR files are probably not present (if they were, the \fBX.\fR could get
 executed). But if there are \fBD.\fR files, they will be taken care of by D.
@@ -159,23 +143,19 @@ processing (default 2 days).
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/uucp\fR\fR
 .ad
 .RS 19n
-.rt  
 directory with commands used by \fBuucleanup\fR internally
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/spool/uucp\fR\fR
 .ad
 .RS 19n
-.rt  
 spool directory
 .RE
 
diff --git a/usr/src/man/man1m/uusched.1m b/usr/src/man/man1m/uusched.1m
index 45526a89d5..46e1919674 100644
--- a/usr/src/man/man1m/uusched.1m
+++ b/usr/src/man/man1m/uusched.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH uusched 1M "19 May 1993" "SunOS 5.11" "System Administration Commands"
+.TH UUSCHED 1M "May 19, 1993"
 .SH NAME
 uusched \- uucp file transport program scheduler
 .SH SYNOPSIS
@@ -32,91 +32,75 @@ information:
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fI debug-level\fR\fR
 .ad
 .RS 18n
-.rt  
 Passes the \fB-u\fR\fI debug-level\fR option  \fBuucico\fR(1M) as \fB-x\fR\fI
 debug-level.\fR
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fI debug-level\fR\fR
 .ad
 .RS 18n
-.rt  
 Outputs debugging messages from  \fBuusched\fR.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/uucp/Devices\fR\fR
 .ad
 .RS 27n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/uucp/Permissions\fR\fR
 .ad
 .RS 27n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/uucp/Systems\fR\fR
 .ad
 .RS 27n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/spool/locks/*\fR\fR
 .ad
 .RS 27n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/spool/uucp/*\fR\fR
 .ad
 .RS 27n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/spool/uucppublic/*\fR\fR
 .ad
 .RS 27n
-.rt  
 
 .RE
 
diff --git a/usr/src/man/man1m/uuxqt.1m b/usr/src/man/man1m/uuxqt.1m
index a54eab99c8..0c08405fbd 100644
--- a/usr/src/man/man1m/uuxqt.1m
+++ b/usr/src/man/man1m/uuxqt.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH uuxqt 1M "19 May 1993" "SunOS 5.11" "System Administration Commands"
+.TH UUXQT 1M "May 19, 1993"
 .SH NAME
 uuxqt \- execute remote command requests
 .SH SYNOPSIS
@@ -48,23 +48,19 @@ provide information, auditing, or restrictions.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fI system\fR\fR
 .ad
 .RS 18n
-.rt  
 Specifies the remote \fIsystem\fR name.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fI debug-level\fR\fR
 .ad
 .RS 18n
-.rt  
 \fIdebug-level\fR is a number from \fB0\fR to \fB9\fR. Higher numbers give more
 detailed debugging information.
 .RE
@@ -72,45 +68,37 @@ detailed debugging information.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/uucp/Limits\fR\fR
 .ad
 .RS 25n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/uucp/Permissions\fR\fR
 .ad
 .RS 25n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/spool/locks/*\fR\fR
 .ad
 .RS 25n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/spool/uucp/*\fR\fR
 .ad
 .RS 25n
-.rt  
 
 .RE
 
diff --git a/usr/src/man/man1m/vmstat.1m b/usr/src/man/man1m/vmstat.1m
index 14a6d6d3de..0eae8f787d 100644
--- a/usr/src/man/man1m/vmstat.1m
+++ b/usr/src/man/man1m/vmstat.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH vmstat 1M "23 Mar 2009" "SunOS 5.11" "System Administration Commands"
+.TH VMSTAT 1M "Mar 23, 2009"
 .SH NAME
 vmstat \- report virtual memory statistics
 .SH SYNOPSIS
@@ -54,134 +54,110 @@ See \fI\fR for device naming conventions for disks.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 13n
-.rt  
 Report cache flushing statistics. This option is obsolete, and no longer
 meaningful. This option might be removed in a future version of Solaris.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 13n
-.rt  
 Report the number of interrupts per device. \fIcount\fR and \fIinterval\fR does
 not apply to the \fB-i\fR option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
 .RS 13n
-.rt  
 Report paging activity in details. This option will display the following,
 respectively:
 .sp
 .ne 2
-.mk
 .na
 \fBepi\fR
 .ad
 .RS 7n
-.rt  
 Executable page-ins.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBepo\fR
 .ad
 .RS 7n
-.rt  
 Executable page-outs.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBepf\fR
 .ad
 .RS 7n
-.rt  
 Executable page-frees.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBapi\fR
 .ad
 .RS 7n
-.rt  
 Anonymous page-ins.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBapo\fR
 .ad
 .RS 7n
-.rt  
 Anonymous page-outs.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBapf\fR
 .ad
 .RS 7n
-.rt  
 Anonymous page-frees.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBfpi\fR
 .ad
 .RS 7n
-.rt  
 File system page-ins.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBfpo\fR
 .ad
 .RS 7n
-.rt  
 File system page-outs.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBfpf\fR
 .ad
 .RS 7n
-.rt  
 File system page-frees.
 .RE
 
@@ -192,35 +168,29 @@ above only report actitivity on the processors in the processor set of the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-q\fR\fR
 .ad
 .RS 13n
-.rt  
 Suppress messages related to state changes.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 13n
-.rt  
 Display the total number of various system events since boot. \fIcount\fR and
 \fIinterval\fR does not apply to the \fB-s\fR option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR\fR
 .ad
 .RS 13n
-.rt  
 Report on swapping rather than paging activity. This option will change two
 fields in \fBvmstat\fR's ``paging'' display: rather than the ``re'' and ``mf''
 fields, \fBvmstat\fR will report ``si'' (swap-ins) and ``so'' (swap-outs).
@@ -228,12 +198,10 @@ fields, \fBvmstat\fR will report ``si'' (swap-ins) and ``so'' (swap-outs).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fBu\fR |  \fBd\fR\fR
 .ad
 .RS 13n
-.rt  
 Specify \fBu\fR for a printed representation of the internal representation of
 time. See \fBtime\fR(2). Specify \fBd\fR for standard date format. See
 \fBdate\fR(1).
@@ -245,24 +213,20 @@ time. See \fBtime\fR(2). Specify \fBd\fR for standard date format. See
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcount\fR\fR
 .ad
 .RS 12n
-.rt  
 Specifies the number of times that the statistics are repeated. \fIcount\fR
 does not apply to the \fB-i\fR and \fB-s\fR options.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdisks\fR\fR
 .ad
 .RS 12n
-.rt  
 Specifies which disks are to be given priority in the output (only four disks
 fit on a line). Common disk names are \fBid\fR, \fBsd\fR, \fBxd\fR, or
 \fBxy,\fR followed by a number (for example, \fBsd2\fR, \fBxd0\fR, and so
@@ -271,12 +235,10 @@ forth).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIinterval\fR\fR
 .ad
 .RS 12n
-.rt  
 Specifies the last number of seconds over which \fBvmstat\fR summarizes
 activity. This number of seconds repeats forever. \fIinterval\fR does not apply
 to the \fB-i\fR and \fB-s\fR options.
@@ -319,44 +281,36 @@ The fields of \fBvmstat\fR's display are
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBkthr\fR\fR
 .ad
 .RS 10n
-.rt  
 Report the number of kernel threads in each of the three following states:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBr\fR\fR
 .ad
 .RS 5n
-.rt  
 the number of kernel threads in run queue
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBb\fR\fR
 .ad
 .RS 5n
-.rt  
 the number of blocked kernel threads that are waiting for resources \fBI/O,\fR
 paging, and so forth
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBw\fR\fR
 .ad
 .RS 5n
-.rt  
 the number of swapped out lightweight processes (LWPs) that are waiting for
 processing resources to finish.
 .RE
@@ -365,32 +319,26 @@ processing resources to finish.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmemory\fR\fR
 .ad
 .RS 10n
-.rt  
 Report on usage of virtual and real memory.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBswap\fR\fR
 .ad
 .RS 8n
-.rt  
 available swap space (Kbytes)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfree\fR\fR
 .ad
 .RS 8n
-.rt  
 size of the free list (Kbytes)
 .RE
 
@@ -398,88 +346,72 @@ size of the free list (Kbytes)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpage\fR\fR
 .ad
 .RS 10n
-.rt  
 Report information about page faults and paging activity. The information on
 each of the following activities is given in units per second.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBre\fR\fR
 .ad
 .RS 6n
-.rt  
 page reclaims \(em but see the \fB-S\fR option for how this field is modified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmf\fR\fR
 .ad
 .RS 6n
-.rt  
 minor faults \(em but see the \fB-S\fR option for how this field is modified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpi\fR\fR
 .ad
 .RS 6n
-.rt  
 kilobytes paged in
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpo\fR\fR
 .ad
 .RS 6n
-.rt  
 kilobytes paged out
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfr\fR\fR
 .ad
 .RS 6n
-.rt  
 kilobytes freed
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBde\fR\fR
 .ad
 .RS 6n
-.rt  
 anticipated short-term memory shortfall (Kbytes)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsr\fR\fR
 .ad
 .RS 6n
-.rt  
 pages scanned by clock algorithm
 .RE
 
@@ -490,12 +422,10 @@ set of the \fBzone\fR's pool.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisk\fR\fR
 .ad
 .RS 10n
-.rt  
 Report the number of disk operations per second. There are slots for up to four
 disks, labeled with a single letter and number. The letter indicates the type
 of disk (s = \fBSCSI\fR, i = \fBIPI\fR, and so forth); the number is the
@@ -504,43 +434,35 @@ logical unit number.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfaults\fR\fR
 .ad
 .RS 10n
-.rt  
 Report the trap/interrupt rates (per second).
 .sp
 .ne 2
-.mk
 .na
 \fB\fBin\fR\fR
 .ad
 .RS 6n
-.rt  
 interrupts
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsy\fR\fR
 .ad
 .RS 6n
-.rt  
 system calls
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcs\fR\fR
 .ad
 .RS 6n
-.rt  
 \fBCPU\fR context switches
 .RE
 
@@ -551,44 +473,36 @@ above only report actitivity on the processors in the processor set of the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcpu\fR\fR
 .ad
 .RS 10n
-.rt  
 Give a breakdown of percentage usage of \fBCPU\fR time. On \fBMP\fR systems,
 this is an average across all processors.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBus\fR\fR
 .ad
 .RS 6n
-.rt  
 user time
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsy\fR\fR
 .ad
 .RS 6n
-.rt  
 system time
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBid\fR\fR
 .ad
 .RS 6n
-.rt  
 idle time
 .RE
 
@@ -605,13 +519,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilitySee below.
+Interface Stability	See below.
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/vntsd.1m b/usr/src/man/man1m/vntsd.1m
index 2d47716b79..d08d283376 100644
--- a/usr/src/man/man1m/vntsd.1m
+++ b/usr/src/man/man1m/vntsd.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH vntsd 1M "31 Mar 2009" "SunOS 5.11" "System Administration Commands"
+.TH VNTSD 1M "Mar 31, 2009"
 .SH NAME
 vntsd \- virtual network terminal server daemon for Logical Domains
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/ldoms/vntsd\fR 
+\fB/usr/lib/ldoms/vntsd\fR
 .fi
 
 .SH DESCRIPTION
@@ -98,7 +98,6 @@ myhost-vnts-salesgroup: h
 The \fBh\fR option invokes help, as described below.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBh\fR\fR
 .ad
@@ -119,7 +118,6 @@ c{id}, n{name} -- connect to console of domain {id} or domain name
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBl\fR\fR
 .ad
@@ -139,7 +137,6 @@ DOMAIN ID       DOMAIN NAME     DOMAIN STATE
 The two domain states and their meanings are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBonline\fR\fR
 .ad
@@ -150,7 +147,6 @@ No one is connected to the console.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconnected\fR\fR
 .ad
@@ -163,7 +159,6 @@ At least one user is already connected to the console.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBq\fR\fR
 .ad
@@ -174,7 +169,6 @@ Disconnect from \fBvntsd\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBc\fI{id}\fR, n\fI{name}\fR\fR\fR
 .ad
@@ -201,7 +195,6 @@ tilde-tilde (\fB~~\fR) sequence outputs a tilde. In conjunction with the
 initial tilde, \fBvntsd\fR accepts the following special console commands:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB~.\fR\fR
 .ad
@@ -212,7 +205,6 @@ Disconnect from the console or console group.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB~w\fR\fR
 .ad
@@ -223,7 +215,6 @@ Force write access to the console.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB~p\fR\fR
 .ad
@@ -235,7 +226,6 @@ console in the list of consoles.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB~n\fR\fR
 .ad
@@ -247,7 +237,6 @@ console in the list of consoles.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB~#\fR\fR
 .ad
@@ -258,7 +247,6 @@ Send break.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB~^B\fR\fR
 .ad
@@ -269,7 +257,6 @@ Send alternate break.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB~?\fR\fR
 .ad
@@ -294,7 +281,6 @@ Display \fBvntsd\fR help, as follows:
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/ldoms/vntsd\fR\fR
 .ad
@@ -305,7 +291,6 @@ Binary executable \fBvntsd\fR file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/ldoms/vntsd.xml\fR\fR
 .ad
@@ -322,13 +307,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
@@ -353,7 +337,6 @@ svc:/ldoms/vntsd
 You can change the following properties using the \fBsvccfg\fR(1M) command:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvntsd/vcc_device\fR\fR
 .ad
@@ -365,7 +348,6 @@ Set an instance of the virtual console concentrator (\fBvcc\fR) driver to which
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvntsd/listen_addr\fR\fR
 .ad
@@ -394,7 +376,6 @@ connect to a console and for this reason it is disabled by default.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvntsd/timeout_minutes\fR\fR
 .ad
@@ -407,7 +388,6 @@ default value is 0, which disables timeout.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvntsd/authorization\fR\fR
 .ad
diff --git a/usr/src/man/man1m/volcopy.1m b/usr/src/man/man1m/volcopy.1m
index 43ed2f55d8..05b2f12739 100644
--- a/usr/src/man/man1m/volcopy.1m
+++ b/usr/src/man/man1m/volcopy.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH volcopy 1M "20 Mar 1995" "SunOS 5.11" "System Administration Commands"
+.TH VOLCOPY 1M "Mar 20, 1995"
 .SH NAME
 volcopy \- make an image copy of file system
 .SH SYNOPSIS
 .LP
 .nf
-\fBvolcopy\fR [\fB-F\fR \fIFSType\fR] [\fB-V\fR] [\fIgeneric_options\fR] 
+\fBvolcopy\fR [\fB-F\fR \fIFSType\fR] [\fB-V\fR] [\fIgeneric_options\fR]
      [\fB-o\fR \fIFSType-specific_options\fR] \fIoperands\fR
 .fi
 
@@ -24,12 +24,10 @@ supported for all \fIFSTypes\fR.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR \fIFSType\fR\fR
 .ad
 .RS 30n
-.rt  
 Specify the \fIFSType\fR on which to operate. The \fIFSType\fR should either be
 specified here or be determinable from \fB/etc/vfstab\fR by matching the
 \fIoperands\fR with an entry in the table. Otherwise, the default file system
@@ -38,12 +36,10 @@ type specified in \fB/etc/default/fs\fR will be used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR\fR
 .ad
 .RS 30n
-.rt  
 Echo the complete command line, but do not execute the command. The command
 line is generated by using the options and arguments provided by the user and
 adding to them information derived from \fB/etc/vfstab\fR. This option should
@@ -52,34 +48,28 @@ be used to verify and validate the command line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIgeneric_options\fR\fR
 .ad
 .RS 30n
-.rt  
 Options that are commonly supported by most \fIFSType\fR-specific command
 modules.  The following options are available:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 6n
-.rt  
 Require the operator to respond "yes" or "no" instead of simply waiting ten
 seconds before the copy is made.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 6n
-.rt  
 (Default) Invoke the DEL if wrong verification sequence.
 .RE
 
@@ -87,12 +77,10 @@ seconds before the copy is made.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIFSType-specific_options\fR\fR
 .ad
 .RS 30n
-.rt  
 Specify \fIFSType\fR-specific options in a comma separated (without spaces)
 list of suboptions and keyword-attribute pairs for interpretation by the
 \fIFSType\fR-specific module of the command.
@@ -104,12 +92,10 @@ list of suboptions and keyword-attribute pairs for interpretation by the
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIoperands\fR\fR
 .ad
 .RS 12n
-.rt  
 generally include the device and volume names and are file system specific. A
 detailed description of the \fIoperands\fR can be found on the
 \fIFSType\fR-specific man pages of \fBvolcopy\fR.
@@ -121,56 +107,46 @@ detailed description of the \fIoperands\fR can be found on the
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful file system copy
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 An error has occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/vfstab\fR\fR
 .ad
 .RS 19n
-.rt  
 list of default parameters for each file system
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/default/fs\fR\fR
 .ad
 .RS 19n
-.rt  
 default local file system type. Default values can be set for the following
 flags in \fB/etc/default/fs\fR. For example: \fBLOCAL=ufs.\fR
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLOCAL:\fR\fR
 .ad
 .RS 10n
-.rt  
 The default partition for a command if no \fIFSType\fR is specified.
 .RE
 
diff --git a/usr/src/man/man1m/volcopy_ufs.1m b/usr/src/man/man1m/volcopy_ufs.1m
index b2ab930599..85b74a02b4 100644
--- a/usr/src/man/man1m/volcopy_ufs.1m
+++ b/usr/src/man/man1m/volcopy_ufs.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH volcopy_ufs 1M "15 Apr 2003" "SunOS 5.11" "System Administration Commands"
+.TH VOLCOPY_UFS 1M "Apr 15, 2003"
 .SH NAME
 volcopy_ufs \- make an image copy of a ufs file system
 .SH SYNOPSIS
@@ -23,12 +23,10 @@ blocksize matched to the device.
 The following option is supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIgeneric_options\fR\fR
 .ad
 .RS 19n
-.rt  
 options supported by the generic  \fBvolcopy\fR command. See
 \fBvolcopy\fR(1M).
 .RE
@@ -39,48 +37,40 @@ options supported by the generic  \fBvolcopy\fR command. See
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfsname\fR\fR
 .ad
 .RS 27n
-.rt  
 represents the mount point (for example, \fBroot\fR, \fBu1\fR, etc.) of the
 file system being copied.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsrcdevice\fR or \fIdestdevice\fR\fR
 .ad
 .RS 27n
-.rt  
 the disk partition specified using the raw device (for example,
 \fB/dev/rdsk/cld0s8\fR, \fB/dev/rdsk/cld1s8\fR, etc.).
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsrcdevice\fR and \fIvolname1\fR\fR
 .ad
 .RS 27n
-.rt  
 the device and physical volume from which the copy of the file system is being
 extracted.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdestdevice\fR and \fIvolname2\fR\fR
 .ad
 .RS 27n
-.rt  
 the target device and physical volume.
 .RE
 
@@ -95,35 +85,29 @@ existing volume name.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Successful file system copy.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-zero\fR
 .ad
 .RS 12n
-.rt  
 An error has occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/filesave.log\fR\fR
 .ad
 .RS 25n
-.rt  
 a record of file systems/volumes copied
 .RE
 
diff --git a/usr/src/man/man1m/vscanadm.1m b/usr/src/man/man1m/vscanadm.1m
index 594059f463..3970383ce4 100644
--- a/usr/src/man/man1m/vscanadm.1m
+++ b/usr/src/man/man1m/vscanadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH vscanadm 1M "7 Jul 2009" "SunOS 5.11" "System Administration Commands"
+.TH VSCANADM 1M "Jul 7, 2009"
 .SH NAME
 vscanadm \- vscan service configuration utility
 .SH SYNOPSIS
@@ -92,7 +92,6 @@ properties, which apply to the service and are not scan engine-specific.
 \fBvscanadm\fR recognizes the following subcommands:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvscanadm set\fR \fB-p\fR \fIproperty\fR=\fIvalue\fR [\fB-p\fR
 \fIproperty\fR=\fIvalue\fR]...\fR
@@ -102,12 +101,10 @@ properties, which apply to the service and are not scan engine-specific.
 Sets the values of \fBvscan\fR service general properties.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIproperty\fR=\fIvalue\fR\fR
 .ad
 .RS 21n
-.rt  
 Specifies a property value
 .RE
 
@@ -115,7 +112,6 @@ Specifies a property value
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvscanadm get\fR [\fB-p\fR \fIproperty\fR]...\fR
 .ad
@@ -125,12 +121,10 @@ Displays the values of \fBvscan\fR service general properties. If no properties
 are specified, all \fBvscan\fR service general properties are displayed.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIproperty\fR\fR
 .ad
 .RS 15n
-.rt  
 Specifies a property value
 .RE
 
@@ -142,12 +136,10 @@ The following properties are available for the \fBvscanadm set\fR and
 \fBvscanadm get\fR subcommands:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmax-size\fR\fR
 .ad
 .RS 19n
-.rt  
 The maximum size of files that should be virus scanned. Files exceeding
 \fImax-size\fR are not scanned. The \fImax-size-action\fR property determines
 whether access should be allowed or denied to files that exceed \fImax-size\fR.
@@ -172,35 +164,29 @@ equal to the maximum file size for the scan engine(s).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmax-size-action\fR\fR
 .ad
 .RS 19n
-.rt  
 Specifies whether access will be allowed or denied to files larger than
 \fImax-size\fR. Files larger than \fImax-size\fR are not virus scanned. Valid
 values are:
 .sp
 .ne 2
-.mk
 .na
 \fBallow\fR
 .ad
 .RS 9n
-.rt  
 allow access to files larger than \fImax-size\fR (no virus scan). This is the
 default value.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBdeny\fR
 .ad
 .RS 9n
-.rt  
 deny access to files larger than \fImax-size\fR (no virus scan)
 .RE
 
@@ -208,7 +194,6 @@ deny access to files larger than \fImax-size\fR (no virus scan)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvscanadm import\fR \fB-p\fR \fIproperty\fR \fIfilename\fR\fR
 .ad
@@ -220,7 +205,6 @@ single line specifying the value of a single property.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvscanadm export\fR \fB-p\fR \fIproperty\fR \fIfilename\fR\fR
 .ad
@@ -232,7 +216,6 @@ single line specifying the value of a single property.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvscanadm validate\fR \fB-p\fR \fIproperty\fR \fIfilename\fR\fR
 .ad
@@ -248,12 +231,10 @@ The following properties are available for the \fBvscanadm import\fR,
 \fBvscanadm export\fR, and \fBvscanadm validate\fR subcommands:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtypes\fR\fR
 .ad
 .RS 9n
-.rt  
 A comma-separated list of file type extension matching rules. This list defines
 which types of files are scanned and which should be excluded during virus
 scanning. Each rule comprises the rule indicator [+|-], followed by a file type
@@ -283,7 +264,6 @@ the types list is "+*".
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvscanadm add-engine\fR [\fB-p\fR \fIproperty\fR=\fIvalue\fR]...
 \fIengine_id\fR\fR
@@ -295,12 +275,10 @@ used for any scan engine properties that are not specified. The hostname
 defaults to the \fIengine_id\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIproperty\fR=\fIvalue\fR\fR
 .ad
 .RS 21n
-.rt  
 Specifies a property value
 .RE
 
@@ -308,7 +286,6 @@ Specifies a property value
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvscanadm remove-engine\fR \fIengine_id\fR\fR
 .ad
@@ -320,7 +297,6 @@ configuration property values.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvscanadm set-engine\fR \fB-p\fR\fIproperty\fR=\fIvalue\fR [\fB-p\fR
 \fIproperty\fR=\fIvalue\fR]... \fIengine_id\fR\fR
@@ -331,12 +307,10 @@ Creates or updates the configuration property values for the scan engine
 identified by \fIengine_id\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIproperty\fR=\fIvalue\fR\fR
 .ad
 .RS 21n
-.rt  
 Specifies a property value
 .RE
 
@@ -344,7 +318,6 @@ Specifies a property value
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvscanadm get-engine\fR [\fB-p\fR \fIproperty\fR=\fIvalue\fR]...
 [\fIengine_id\fR]\fR
@@ -358,12 +331,10 @@ configured scan engines. If no properties are specified, this subcommand
 displays all \fBvscan\fR service scan engine properties.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIproperty\fR=\fIvalue\fR\fR
 .ad
 .RS 21n
-.rt  
 Specifies a property value
 .RE
 
@@ -376,12 +347,10 @@ The following properties are available for the \fBvscanadm add-engine\fR,
 get-engine\fR subcommands:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBenable\fR\fR
 .ad
 .RS 18n
-.rt  
 Specifies whether the scan engine is enabled or disabled. Valid values are "on"
 (enabled) and "off" (disabled). The default is "on" (enabled). A scan engine
 cannot be enabled if its host property is invalid.
@@ -389,35 +358,29 @@ cannot be enabled if its host property is invalid.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhost\fR\fR
 .ad
 .RS 18n
-.rt  
 Hostname or \fBIPv4\fR format \fBIP\fR address of the scan engine.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBport\fR\fR
 .ad
 .RS 18n
-.rt  
 \fBICAP\fR port number of the scan engine. The numeric value ranges from 0 to
 65535. The default \fBICAP\fR port is 1344.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmax-connection\fR\fR
 .ad
 .RS 18n
-.rt  
 The maximum number of concurrent connections that may be established with a
 scan engine. The numeric value ranges from 1 to 512. This property defaults to
 8.
@@ -425,24 +388,20 @@ scan engine. The numeric value ranges from 1 to 512. This property defaults to
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvscanadm show\fR\fR
 .ad
 .RS 23n
-.rt  
 Displays the values of all \fBvscan\fR service general properties and scan
 engine properties.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvscanadm stats\fR [\fB-z\fR]\fR
 .ad
 .RS 23n
-.rt  
 Displays or resets the following \fBvscan\fR service statistics:
 .RS +4
 .TP
@@ -470,12 +429,10 @@ scan errors (including a per scan engine error count)
 .RE
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-z\fR\fR
 .ad
 .RS 6n
-.rt  
 Resets \fBvscan\fR service statistics counters to zero
 .RE
 
@@ -629,23 +586,19 @@ enter
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnon-zero\fR\fR
 .ad
 .RS 12n
-.rt  
 An error occurred.
 .RE
 
@@ -657,15 +610,14 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 _
-Utility output formatNot-An-Interface
+Utility output format	Not-An-Interface
 .TE
 
 .SH SEE ALSO
@@ -680,7 +632,6 @@ and statistics. To set property values or reset statistics, the following
 authorizations are required:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsolaris.smf.value.vscan\fR\fR
 .ad
@@ -691,7 +642,6 @@ change the property values or reset statistics
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsolaris.manage.vscan\fR\fR
 .ad
@@ -706,7 +656,6 @@ To add or remove properties (\fBadd-engine\fR, \fBremove-engine\fR) the
 following authorizations are required:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsolaris.smf.modify.application\fR\fR
 .ad
@@ -717,7 +666,6 @@ add or remove property group
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsolaris.manage.vscan\fR\fR
 .ad
diff --git a/usr/src/man/man1m/vscand.1m b/usr/src/man/man1m/vscand.1m
index 94513039c2..e1b6ed9ab6 100644
--- a/usr/src/man/man1m/vscand.1m
+++ b/usr/src/man/man1m/vscand.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH vscand 1M "6 Nov 2007" "SunOS 5.11" "System Administration Commands"
+.TH VSCAND 1M "Nov 6, 2007"
 .SH NAME
 vscand \- vscan service daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/vscan/vscand\fR 
+\fB/usr/lib/vscan/vscand\fR
 .fi
 
 .SH DESCRIPTION
@@ -58,23 +58,19 @@ The \fBvscan\fR service is disabled by default, and can be enabled using
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Daemon started successfully.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnon-zero\fR\fR
 .ad
 .RS 12n
-.rt  
 Daemon failed to start.
 .RE
 
@@ -86,13 +82,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/wall.1m b/usr/src/man/man1m/wall.1m
index e947df22cf..3b6206d0b8 100644
--- a/usr/src/man/man1m/wall.1m
+++ b/usr/src/man/man1m/wall.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH wall 1M "13 Jul 1994" "SunOS 5.11" "System Administration Commands"
+.TH WALL 1M "Jul 13, 1994"
 .SH NAME
 wall \- write to all users
 .SH SYNOPSIS
@@ -56,23 +56,19 @@ will appear in "meta" notation.  For example, `\fB\e003\fR\&' is displayed as
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 14n
-.rt  
 Broadcast message to the console and pseudo-terminals.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-\fR\fBg\fR \fIgrpname\fR\fR
 .ad
 .RS 14n
-.rt  
 Broadcast to the users in a specified group only, per the group database (see
 \fBgroup\fR(4)).
 .RE
diff --git a/usr/src/man/man1m/wanboot_keygen.1m b/usr/src/man/man1m/wanboot_keygen.1m
index 87dce1c292..5edfbf04a2 100644
--- a/usr/src/man/man1m/wanboot_keygen.1m
+++ b/usr/src/man/man1m/wanboot_keygen.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH wanboot_keygen 1M "18 Apr 2003" "SunOS 5.11" "System Administration Commands"
+.TH WANBOOT_KEYGEN 1M "Apr 18, 2003"
 .SH NAME
 wanboot_keygen \- create and display client and server keys for WAN booting
 .SH SYNOPSIS
@@ -78,12 +78,10 @@ by the user.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 6n
-.rt  
 Generate and store per-client 3DES/AES encryption keys, avoiding any DES weak
 keys. Also generates and stores per-client HMAC SHA-1 keys. Used in conjunction
 with \fB-o\fR.
@@ -91,12 +89,10 @@ with \fB-o\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 6n
-.rt  
 Display a key of type specified by \fIkeytype\fR, which must be one of
 \fB3des\fR, \fBaes\fR, or \fBsha1\fR. Use \fB-d\fR with \fB-m\fR or with
 \fB-c\fR and \fB-o\fR.
@@ -104,23 +100,19 @@ Display a key of type specified by \fIkeytype\fR, which must be one of
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
 .RS 6n
-.rt  
 Generate and store a "master" HMAC SHA-1 key for WAN install.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR\fR
 .ad
 .RS 6n
-.rt  
 Specifies the WANboot client and/or keytype.
 .RE
 
@@ -161,23 +153,19 @@ Key
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful operation.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -189,13 +177,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityObsolete
+Interface Stability	Obsolete
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/wanboot_keymgmt.1m b/usr/src/man/man1m/wanboot_keymgmt.1m
index 63b266662c..bda9ca6221 100644
--- a/usr/src/man/man1m/wanboot_keymgmt.1m
+++ b/usr/src/man/man1m/wanboot_keymgmt.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH wanboot_keymgmt 1M "18 Apr 2003" "SunOS 5.11" "System Administration Commands"
+.TH WANBOOT_KEYMGMT 1M "Apr 18, 2003"
 .SH NAME
 wanboot_keymgmt \- insert and extract keys
 .SH SYNOPSIS
@@ -48,70 +48,58 @@ type is used.
 The following arguments are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 19n
-.rt  
 Used in conjunction with \fB-k\fR to insert a raw key in \fIkeystore\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIoutfile\fR\fR
 .ad
 .RS 19n
-.rt  
 Used to specify a file to receive an extracted key.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR \fIkey_file\fR\fR
 .ad
 .RS 19n
-.rt  
 Used in conjunction with \fB-i\fR to specify the file in which a raw key is
 stored. This key will be inserted in \fIkeystore\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR type=\fIkeytype\fR\fR
 .ad
 .RS 19n
-.rt  
 Specifies the type of key being inserted or extracted. Must be one of
 \fB3des\fR, \fBaes\fR, \fBrsa\fR, or \fBsha1\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIkeystore\fR\fR
 .ad
 .RS 19n
-.rt  
 Specifies a repository in which a key will be inserted or from which a key will
 be extracted.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
 .RS 19n
-.rt  
 Used in conjunction with \fB-f\fR to extract a key of a specified type and
 deposit it in \fIoutfile\fR.
 .RE
@@ -119,23 +107,19 @@ deposit it in \fIoutfile\fR.
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful operation.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -147,13 +131,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityObsolete
+Interface Stability	Obsolete
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/wanboot_p12split.1m b/usr/src/man/man1m/wanboot_p12split.1m
index 43612f4b29..ede930eeb9 100644
--- a/usr/src/man/man1m/wanboot_p12split.1m
+++ b/usr/src/man/man1m/wanboot_p12split.1m
@@ -3,14 +3,14 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH wanboot_p12split 1M "18 Apr 2003" "SunOS 5.11" "System Administration Commands"
+.TH WANBOOT_P12SPLIT 1M "Apr 18, 2003"
 .SH NAME
 wanboot_p12split \- split a PKCS #12 file into separate certificate and key
 files
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/inet/wanboot/p12split\fR \fB-i\fR \fIp12file\fR \fB-c\fR \fIout_cert\fR \fB-k\fR \fIout_key\fR 
+\fB/usr/lib/inet/wanboot/p12split\fR \fB-i\fR \fIp12file\fR \fB-c\fR \fIout_cert\fR \fB-k\fR \fIout_key\fR
      [\fB-t\fR \fIout_trust\fR \fB-l\fR \fIid\fR \fB-v\fR]
 .fi
 
@@ -31,91 +31,75 @@ standard output.
 The following arguments and options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIout_cert\fR\fR
 .ad
 .RS 16n
-.rt  
 Specifies a repository that receives a extracted certificate.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIp12file\fR\fR
 .ad
 .RS 16n
-.rt  
 Specifies a repository from which a certificate and private key is extracted.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR \fIout_key\fR\fR
 .ad
 .RS 16n
-.rt  
 Specifies a repository that receives a extracted private key.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIid\fR\fR
 .ad
 .RS 16n
-.rt  
 Specifies the value for the \fBLocalKeyId\fR that will be used in the new
 certificate and key files.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fIout_trust\fR\fR
 .ad
 .RS 16n
-.rt  
 Specifies a file for receiving an extracted trust certificate.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 16n
-.rt  
 Displays a verbose description of the split to stdout.
 .RE
 
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 6n
-.rt  
 Successful operation.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB>0\fR\fR
 .ad
 .RS 6n
-.rt  
 An error occurred.
 .RE
 
@@ -127,13 +111,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUnstable
+Interface Stability	Unstable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/wanbootutil.1m b/usr/src/man/man1m/wanbootutil.1m
index efa5d5eee5..aed2a6b85d 100644
--- a/usr/src/man/man1m/wanbootutil.1m
+++ b/usr/src/man/man1m/wanbootutil.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH wanbootutil 1M "18 Apr 2003" "SunOS 5.11" "System Administration Commands"
+.TH WANBOOTUTIL 1M "Apr 18, 2003"
 .SH NAME
 wanbootutil \- manage keys and certificates for WAN booting
 .SH SYNOPSIS
@@ -32,34 +32,28 @@ hashing keys and manipulates PKCS #12 files for use by WAN boot.
 \fBwanbootutil\fR has three subcommands, each covered in a separate man page:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwanboot_keygen\fR(1M)\fR
 .ad
 .RS 24n
-.rt  
 Generates encryption and hashing keys.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwanboot_keymgmt\fR(1M)\fR
 .ad
 .RS 24n
-.rt  
 Inserts and extracts keys from WAN boot key repositories.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwanboot_p12split\fR(1M)\fR
 .ad
 .RS 24n
-.rt  
 Splits a PKCS #12 file into separate certificate and key files for use by WAN
 boot.
 .RE
@@ -105,23 +99,19 @@ wanbootutil keymgmt -i -k keyfile \e
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Successful operation.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnon-zero\fR\fR
 .ad
 .RS 12n
-.rt  
 An error occurred. Writes an appropriate error message to standard error.
 .RE
 
@@ -133,13 +123,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityObsolete
+Interface Stability	Obsolete
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/whodo.1m b/usr/src/man/man1m/whodo.1m
index 5acbc1ae5d..d2df2977d2 100644
--- a/usr/src/man/man1m/whodo.1m
+++ b/usr/src/man/man1m/whodo.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH whodo 1M "18 Jun 2003" "SunOS 5.11" "System Administration Commands"
+.TH WHODO 1M "Jun 18, 2003"
 .SH NAME
 whodo \- who is doing what
 .SH SYNOPSIS
@@ -34,23 +34,19 @@ that user.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fR
 .ad
 .RS 6n
-.rt  
 Suppress the heading.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 6n
-.rt  
 Produce a long form of output. The fields displayed are: the user's login name,
 the name of the tty the user is on, the time of day the user logged in (in
 \fIhours\fR\fB:\fR\fIminutes\fR), the idle time \(em that is, the time since
@@ -117,12 +113,10 @@ variables is set in the environment, the "C" (U.S. style) locale determines how
 \fBwhodo\fR behaves.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLC_CTYPE\fR\fR
 .ad
 .RS 15n
-.rt  
 Determines how \fBwhodo\fR handles characters. When \fBLC_CTYPE\fR is set to a
 valid value, \fBwhodo\fR can display and handle text and filenames containing
 valid characters for that locale. The \fBwhodo\fR command can display and
@@ -134,12 +128,10 @@ valid.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLC_MESSAGES\fR\fR
 .ad
 .RS 15n
-.rt  
 Determines how diagnostic and informative messages are presented. This includes
 the language and style of the messages, and the correct form of affirmative and
 negative responses. In the "C" locale, the messages are presented in the
@@ -148,12 +140,10 @@ default form found in the program itself (in most cases, U.S. English).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLC_TIME\fR\fR
 .ad
 .RS 15n
-.rt  
 Determines how \fBwhodo\fR handles date and time formats. In the "C" locale,
 date and time handling follow the U.S. rules.
 .RE
@@ -164,57 +154,47 @@ date and time handling follow the U.S. rules.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 12n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fBnon-zero\fR
 .ad
 .RS 12n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/passwd\fR\fR
 .ad
 .RS 18n
-.rt  
 System password file
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/utmpx\fR\fR
 .ad
 .RS 18n
-.rt  
 User access and administration information
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/proc/pid\fR\fR
 .ad
 .RS 18n
-.rt  
 Contains PID
 .RE
 
diff --git a/usr/src/man/man1m/wificonfig.1m b/usr/src/man/man1m/wificonfig.1m
index 3cd1da6caa..1772ec890f 100644
--- a/usr/src/man/man1m/wificonfig.1m
+++ b/usr/src/man/man1m/wificonfig.1m
@@ -3,25 +3,25 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH wificonfig 1M "31 Oct 2007" "SunOS 5.11" "System Administration Commands"
+.TH WIFICONFIG 1M "Oct 31, 2007"
 .SH NAME
 wificonfig \- WLAN configuration
 .SH SYNOPSIS
 .LP
 .nf
-\fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] [\fB-i\fR \fIinterface\fR] autoconf 
+\fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] [\fB-i\fR \fIinterface\fR] autoconf
      [\fIwait\fR={\fIn\fR|\fIforever\fR}]
 .fi
 
 .LP
 .nf
-\fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] [\fB-i\fR \fIinterface\fR] connect profile 
+\fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] [\fB-i\fR \fIinterface\fR] connect profile
      [\fIwait\fR={\fIn\fR|\fIforever\fR}]
 .fi
 
 .LP
 .nf
-\fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] [\fB-i\fR \fIinterface\fR] connect essid 
+\fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] [\fB-i\fR \fIinterface\fR] connect essid
      [\fIwait\fR={\fIn\fR|\fIforever\fR}]
 .fi
 
@@ -32,13 +32,13 @@ wificonfig \- WLAN configuration
 
 .LP
 .nf
-\fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] [\fB-i\fR \fIinterface\fR] getparam 
+\fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] [\fB-i\fR \fIinterface\fR] getparam
      [\fIparameter\fR []...]
 .fi
 
 .LP
 .nf
-\fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] [\fB-i\fR \fIinterface\fR] setparam 
+\fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] [\fB-i\fR \fIinterface\fR] setparam
      [\fIparameter\fR=\fIvalue\fR []...]
 .fi
 
@@ -64,13 +64,13 @@ wificonfig \- WLAN configuration
 
 .LP
 .nf
-\fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] createprofile profile 
+\fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] createprofile profile
      [\fIparameter\fR=\fIvalue\fR []...]
 .fi
 
 .LP
 .nf
-\fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] deleteprofile \fIprofile1\fR 
+\fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] deleteprofile \fIprofile1\fR
      [\fIprofile2\fR []...]
 .fi
 
@@ -86,13 +86,13 @@ wificonfig \- WLAN configuration
 
 .LP
 .nf
-\fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] getprofileparam \fIprofile\fR 
+\fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] getprofileparam \fIprofile\fR
      [\fIparameter\fR []...]
 .fi
 
 .LP
 .nf
-\fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] setprofileparam 
+\fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] setprofileparam
      [\fIparameter\fR=\fIvalue\fR []...]
 .fi
 
@@ -172,23 +172,19 @@ heuristics). A few subcommands (\fBlistprefer\fR, \fBsetprefer\fR,
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIinterface\fR\fR
 .ad
 .RS 16n
-.rt  
 Specifies a wireless network interface to do the configuration.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot_path\fR\fR
 .ad
 .RS 16n
-.rt  
 Defines the full path name of a directory to use as the \fIroot_path\fR. This
 affects the location of the private files where \fBwificonfig\fR stores the
 Configuration Profiles and \fBWEP\fR keys.
@@ -200,12 +196,10 @@ Configuration Profiles and \fBWEP\fR keys.
 The following operand is supported:
 .sp
 .ne 2
-.mk
 .na
 \fBprofile\fR
 .ad
 .RS 11n
-.rt  
 The name of a \fBWiFi\fR profile. It can be a string between 1 and 32
 characters. However, "all", "{preference}", "{history}", "{active_profile}",
 and any strings contained in brackets, such as "[foo]", are not allowed as a
@@ -218,7 +212,6 @@ profile name.
 The following subcommands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBautoconf\fR [wait={\fIn\fR|\fIforever\fR}]\fR
 .ad
@@ -252,7 +245,6 @@ before the \fBwificonfig autoconf\fR subcommand is given.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconnect\fR \fIprofile\fR[wait={\fIn\fR|\fIforever\fR}]\fR
 .ad
@@ -279,7 +271,7 @@ tries until the \fBNIC\fR is successfully connected to the profile or essid
 that was specified.
 .sp
 The \fBconnect\fR subcommand prints one of the following lines depending on
-whether or not a Configuration Profile was 	 found for the specified name:
+whether or not a Configuration Profile was found for the specified name:
 .sp
 .in +2
 .nf
@@ -300,7 +292,6 @@ before the \fBwificonfig autoconf\fR subcommand is given.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisconnect\fR\fR
 .ad
@@ -315,7 +306,6 @@ subcommand.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgetparam\fR [parameter [...]]\fR
 .ad
@@ -353,7 +343,6 @@ $ wificonfig getparam <parameter1> [parameter2 [...]]
 case insensitive).
 .sp
 .ne 2
-.mk
 .na
 \fB\fIbssid\fR\fR
 .ad
@@ -369,7 +358,6 @@ value is "none". This parameter is read-only.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIessid\fR\fR
 .ad
@@ -382,7 +370,6 @@ the built-in heuristics. The default value is an empty string.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIbsstype\fR\fR
 .ad
@@ -398,7 +385,6 @@ of "auto" automatically switches between the two types. The default value is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIcreateibss\fR\fR
 .ad
@@ -415,7 +401,6 @@ to join a \fBWLAN\fR first. If this is successful, the setting of
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIchannel\fR\fR
 .ad
@@ -432,7 +417,6 @@ the card.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIrates\fR\fR
 .ad
@@ -449,7 +433,6 @@ chip.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIpowermode\fR\fR
 .ad
@@ -462,7 +445,6 @@ combination of speed and power saving. The default value is "off".
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIauthmode\fR\fR
 .ad
@@ -475,7 +457,6 @@ authentication mode. The default value is "opensystem".
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIencryption\fR\fR
 .ad
@@ -488,7 +469,6 @@ value is "none".
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIwepkey1\fR|\fIwepkey2\fR|\fIwepkey3\fR|\fIwepkey4\fR\fR
 .ad
@@ -510,7 +490,6 @@ allow \fBps\fR(1) to read the keys.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIwepkeyindex\fR\fR
 .ad
@@ -523,7 +502,6 @@ subcommand is only valid when \fBWEP\fR is on.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsignal\fR\fR
 .ad
@@ -537,7 +515,6 @@ parameter is read-only and indicates the radio signal strength received by the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIradio\fR\fR
 .ad
@@ -551,7 +528,6 @@ turn on the radio and "off" to turn off the radio. The default value is "on".
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrestoredef\fR\fR
 .ad
@@ -567,7 +543,6 @@ subcommand.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBscan\fR\fR
 .ad
@@ -578,7 +553,6 @@ Scans and lists the currently available \fBWLAN\fRs.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshowstatus\fR\fR
 .ad
@@ -592,13 +566,12 @@ encrypted or not, and the signal strength.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsetwepkey\fR 1|2|3|4\fR
 .ad
 .sp .6
 .RS 4n
-Sets one of the 4 \fBWEP\fR encryption keys. 	\fBWEP\fR keys are used to
+Sets one of the 4 \fBWEP\fR encryption keys. \fBWEP\fR keys are used to
 encrypt the content of the network packets which are transmitted on air. There
 are 4 \fBWEP\fR keys in the \fBNIC\fR according to the 802.11 standards. The
 \fBsetwepkey\fR subcommand is used to update one of the 4 keys by prompting the
@@ -634,7 +607,6 @@ The "solaris.network.wifi.wep" authorization is required for this subcommand.
 The following profile subcommands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcreateprofile\fR \fIprofile\fR [parameter=value] [...]\fR
 .ad
@@ -650,7 +622,6 @@ subcommand.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdeleteprofile\fR \fIprofile1\fR [\fIprofile2\fR [...]]\fR
 .ad
@@ -666,7 +637,6 @@ subcommand.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshowprofile\fR [\fIprofile\fR]\fR
 .ad
@@ -680,7 +650,6 @@ the profiles are shown.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsetprofilewepkey\fR 1|2|3|4\fR
 .ad
@@ -712,7 +681,6 @@ The "solaris.network.wifi.wep" authorization is required for this subcommand.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgetprofileparam\fR \fIprofile\fR [parameter]\  [...]]\fR
 .ad
@@ -723,10 +691,10 @@ The "solaris.network.wifi.wep" authorization is required for this subcommand.
 .sp .6
 .RS 4n
 Gets or sets parameters in the specified Configuration Profile "\fIprofile\fR".
-Like 	 the other profile subcommands, these subcommands do not affect the
-configuration of a network interface, even if a \fBWiFi\fR 	 interface is
-currently running with the specified profile. 	 In order for the modified
-profile to be applied to the 	 network interface, the \fBconnect\fR or
+Like the other profile subcommands, these subcommands do not affect the
+configuration of a network interface, even if a \fBWiFi\fR interface is
+currently running with the specified profile. In order for the modified
+profile to be applied to the network interface, the \fBconnect\fR or
 \fBautoconf\fR subcommands have to be used after the profile has been updated.
 .sp
 A \fBgetprofileparam\fR without any parameters will display all the parameters
@@ -756,7 +724,6 @@ for the \fBsetparam\fR subcommand.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhistory\fR\fR
 .ad
@@ -770,7 +737,6 @@ time. These records can be listed by using this subcommand.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlistprefer\fR\fR
 .ad
@@ -781,7 +747,6 @@ Lists the content of the Preference List.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremoveprefer\fR \fIprofile\fR\fR
 .ad
@@ -796,7 +761,6 @@ subcommand.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsetprefer\fR \fIprofile\fR [\fIn\fR]\fR
 .ad
@@ -827,7 +791,7 @@ modes of the parameters:
 .sp
 .in +2
 .nf
-% wificonfig -i ath0 setparam 
+% wificonfig -i ath0 setparam
           parameter     property
               bssid     read only
               essid     read/write
@@ -837,7 +801,7 @@ modes of the parameters:
          encryption     read/write
         wepkeyindex     read/write
              signal     read only
-  
+
 .fi
 .in -2
 .sp
@@ -852,7 +816,7 @@ To get the current rates and signal strength from the driver:
 .in +2
 .nf
 % wificonfig -i ath0 getparam rates signal
-      ath0: 
+      ath0:
          rates = 1,2,5.5,11
          signal = 10
 .fi
@@ -900,7 +864,7 @@ removes \fImy_neighbor\fR from the Preference List
 .nf
 % wificonfig setprefer myXXX 1
 % ifconfig ath0 plumb
-% wificonfig -i ath0 autoconf 
+% wificonfig -i ath0 autoconf
 % wificonfig removeprefer my_neighbor
 .fi
 .in -2
@@ -1049,46 +1013,38 @@ roomlinx        00:40:96:a0:ab:39 access point  none            8
 .SH EXIT STATUS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful operation
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 Fatal Error; the operation failed. For example, a connect failed to associate
 with an Access Point.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Improper Use; help information will be printed
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 5n
-.rt  
 Minor error
 .RE
 
@@ -1100,13 +1056,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUnstable
+Interface Stability	Unstable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/wpad.1m b/usr/src/man/man1m/wpad.1m
index 5d35617303..c1e61dc449 100644
--- a/usr/src/man/man1m/wpad.1m
+++ b/usr/src/man/man1m/wpad.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH wpad 1M "11 Mar 2008" "SunOS 5.11" "System Administration Commands"
+.TH WPAD 1M "Mar 11, 2008"
 .SH NAME
 wpad \- WPA and WPA2 protocol daemon
 .SH SYNOPSIS
@@ -67,7 +67,6 @@ Stop and start the \fBwpad\fR daemon using \fBdladm\fR(1M). Use:
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIinterface\fR\fR
 .ad
@@ -78,7 +77,6 @@ Specify a WiFi Link interface to start the \fBwpad\fR daemon.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-k\fR \fIpre_shared_key_name\fR\fR
 .ad
@@ -137,13 +135,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/wracct.1m b/usr/src/man/man1m/wracct.1m
index 039890e42d..c3e99d3770 100644
--- a/usr/src/man/man1m/wracct.1m
+++ b/usr/src/man/man1m/wracct.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH wracct 1M "13 July 2005" "SunOS 5.11" "System Administration Commands"
+.TH WRACCT 1M "Jul 13, 2005"
 .SH NAME
 wracct \- write extended accounting records for active processes and tasks
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/sbin/wracct\fR \fB-i\fR \fIid_list\fR [\fB-t\fR \fIrecord_type\fR] 
+\fB/usr/sbin/wracct\fR \fB-i\fR \fIid_list\fR [\fB-t\fR \fIrecord_type\fR]
      {process | task}
 .fi
 
@@ -40,12 +40,10 @@ a partial record, which reflects usage since task creation.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIid_list\fR\fR
 .ad
 .RS 18n
-.rt  
 Select the \fBID\fRs of the tasks or processes to write records for. Specify
 \fIid_list\fR as a comma- or space-separated list of IDs, presented as a single
 argument. For some shells, this requires appropriate quoting of the argument.
@@ -53,12 +51,10 @@ argument. For some shells, this requires appropriate quoting of the argument.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fIrecord_type\fR\fR
 .ad
 .RS 18n
-.rt  
 Select type of record to write for the selected task or process. For tasks,
 \fIrecord_type\fR can be \fBpartial\fR or \fBinterval\fR. \fBpartial\fR is the
 default type, and the only type available for process records.
@@ -70,24 +66,20 @@ default type, and the only type available for process records.
 The following operands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprocess\fR\fR
 .ad
 .RS 11n
-.rt  
 Treat the given \fBID\fR as a process \fBID\fR for the purposes of constructing
 and writing an extended accounting record.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtask\fR\fR
 .ad
 .RS 11n
-.rt  
 Treat the given \fBID\fR as a task \fBID\fR for the purposes of constructing
 and writing an extended accounting record.
 .RE
@@ -127,68 +119,56 @@ Write an interval record for the task with \fBID 182\fR.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 An error occurred.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Invalid command line options were specified.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB3\fR\fR
 .ad
 .RS 5n
-.rt  
 Pertinent components of extended accounting facility are not active.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/exacct/task\fR\fR
 .ad
 .RS 24n
-.rt  
 
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/adm/exacct/proc\fR\fR
 .ad
 .RS 24n
-.rt  
 Extended accounting data files.
 .RE
 
diff --git a/usr/src/man/man1m/wusbadm.1m b/usr/src/man/man1m/wusbadm.1m
index 7f99660de6..b209317acc 100644
--- a/usr/src/man/man1m/wusbadm.1m
+++ b/usr/src/man/man1m/wusbadm.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH wusbadm 1M "22 Apr 2009" "SunOS 5.11" "System Administration Commands"
+.TH WUSBADM 1M "Apr 22, 2009"
 .SH NAME
 wusbadm \- administer wireless USB hosts and devices
 .SH SYNOPSIS
@@ -65,7 +65,6 @@ its multiple records of association depends on the manufacturer.
 Each \fBwusbadm\fR subcommand operates on one of the following objects:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIhost-id\fR\fR
 .ad
@@ -80,7 +79,6 @@ subcommand.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIdev-id\fR\fR
 .ad
@@ -106,7 +104,6 @@ each subcommand displays subcommand-specific usage information if you run it
 without any options or operands.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist\fR [\fB-h\fR | \fB-d\fR] [\fB-o\fR \fIfield\fR[,...]]\fR
 .ad
@@ -118,7 +115,6 @@ devices and all fields. Each host and its devices will be displayed as a group.
 This subcommand supports the following options.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIfield\fR[,...], \fB--output\fR=\fIfield\fR[,...]\fR
 .ad
@@ -130,7 +126,6 @@ display all fields. By default (without \fB-o\fR), \fBlist\fR displays all
 fields.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBID\fR\fR
 .ad
@@ -141,7 +136,6 @@ The \fIhost-id\fR or \fIdev-id\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTYPE\fR\fR
 .ad
@@ -159,7 +153,6 @@ forth.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSTATE\fR\fR
 .ad
@@ -168,7 +161,6 @@ forth.
 There are the following states for the host:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBenabled\fR\fR
 .ad
@@ -180,7 +172,6 @@ association, connecting devices, performing data communication, and so forth.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisabled\fR\fR
 .ad
@@ -194,7 +185,6 @@ driver detach.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisconnected\fR\fR
 .ad
@@ -207,7 +197,6 @@ after it is unplugged from the USB port on the system.
 There are the folllowing states for the device:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBconnected\fR\fR
 .ad
@@ -220,7 +209,6 @@ the association is complete and its radio is turned on.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisconnected\fR\fR
 .ad
@@ -237,7 +225,6 @@ hardware problems, and so forth.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR, \fB--host\fR\fR
 .ad
@@ -248,7 +235,6 @@ List the wireless USB hosts only.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR, \fB--device\fR\fR
 .ad
@@ -261,7 +247,6 @@ List the wireless USB devices only.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBassociate\fR [\fB-h\fR \fIhost-id\fR] [[\fB-c\fR [\fB-f\fR]] | \fB-n\fR]
 [\fB-o\fR]\fR
@@ -274,7 +259,6 @@ step before a wireless USB device can be connected with a wireless USB host.
 There are two association models:
 .sp
 .ne 2
-.mk
 .na
 \fBCable association\fR
 .ad
@@ -288,7 +272,6 @@ the subsequent connections between the same host and the device.
 
 .sp
 .ne 2
-.mk
 .na
 \fBNumeric association\fR
 .ad
@@ -310,7 +293,6 @@ list all of them, enabling a user to choose among them. This subcommand has the
 following options.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIhost-id\fR, \fB--host\fR \fIhost-id\fR\fR
 .ad
@@ -322,7 +304,6 @@ specified, this subcommand lists all enabled hosts for users to choose.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR, \fB--cable\fR\fR
 .ad
@@ -334,7 +315,6 @@ the host and runs the associate subcommand with this option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR, \fB--numeric\fR\fR
 .ad
@@ -349,7 +329,6 @@ If neither of the preceding two association model  options (\fB-n\fR or
 following association model options.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR, \fB--force\fR\fR
 .ad
@@ -361,7 +340,6 @@ the host and runs the associate subcommand with this option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR, \fB--onetime\fR\fR
 .ad
@@ -377,7 +355,6 @@ need to perform another association for the next connection.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremove-dev\fR [[\fB-d\fR \fIdev-id\fR] | [\fB-h\fR
 \fIhost-id\fR]][\fB-f\fR]\fR
@@ -390,7 +367,6 @@ runs the \fBassociate\fR subcommand again, for the host and device. This
 subcommand has the following options.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR, \fB--device\fR=\fIdev-id\fR\fR
 .ad
@@ -402,7 +378,6 @@ Remove the association information of the wireless USB device specified by
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIhost-id\fR, \fB--host\fR=\fIhost-id\fR\fR
 .ad
@@ -414,7 +389,6 @@ with the host specified by \fIhost-id\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR, \fB--force\fR\fR
 .ad
@@ -428,7 +402,6 @@ connected with the host, then this subcommand will force it to disconnect.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremove-host\fR [\fB-h\fR \fIhost-id\fR] [\fB-f\fR]\fR
 .ad
@@ -444,7 +417,6 @@ can be restored. It is not recommended to remove a on-board host. This
 subcommand has the following options.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIhost-id\fR, \fB--host\fR=\fIhost-id\fR\fR
 .ad
@@ -455,7 +427,6 @@ Specifies the \fIhost-id\fR to be removed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR, \fB--force\fR\fR
 .ad
@@ -469,7 +440,6 @@ devices connected with the host, then force them to disconnect.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBenable-host\fR [\fB-h\fR \fIhost-id\fR]\fR
 .ad
@@ -479,7 +449,6 @@ Take the host to the enabled state. By default, the host is in the enabled
 state. This subcommand has the following option.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIhost-id\fR, \fB--host\fR=\fIhost-id\fR\fR
 .ad
@@ -492,7 +461,6 @@ Specifies the \fIhost-id\fR to be enabled.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisable-host\fR [\fB-h\fR \fIhost-id\fR] [\fB-f\fR]\fR
 .ad
@@ -504,7 +472,6 @@ brings the host back to the enabled state. This subcommand has the following
 options.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIhost-id\fR, \fB--host\fR=\fIhost-id\fR\fR
 .ad
@@ -515,7 +482,6 @@ Specifies the \fIhost-id\fR to be disabled.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR, \fB--force\fR\fR
 .ad
@@ -611,7 +577,6 @@ until they are associated again. Continue (yes/no)?
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -622,7 +587,6 @@ Successful operation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
@@ -634,7 +598,6 @@ host.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
@@ -654,13 +617,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ypbind.1m b/usr/src/man/man1m/ypbind.1m
index 778c97ce0c..db80d1406d 100644
--- a/usr/src/man/man1m/ypbind.1m
+++ b/usr/src/man/man1m/ypbind.1m
@@ -1,10 +1,10 @@
 '\" te
-.\"  Copyright 1989 AT&T  
+.\"  Copyright 1989 AT&T
 .\" Copyright (C) 2004, Sun Microsystems, Inc. All Rights Reserved
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ypbind 1M "20 Dec 2007" "SunOS 5.11" "System Administration Commands"
+.TH YPBIND 1M "Dec 20, 2007"
 .SH NAME
 ypbind \- NIS binder process
 .SH SYNOPSIS
@@ -76,7 +76,6 @@ work, \fBypbind\fR must have been invoked with flags \fB-ypset\fR or
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-broadcast\fR\fR
 .ad
@@ -90,7 +89,6 @@ ease of use.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-ypset\fR\fR
 .ad
@@ -103,7 +101,6 @@ insecure.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-ypsetme\fR\fR
 .ad
@@ -118,7 +115,6 @@ transport. By default, no external process can change the binding.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/yp/binding/\fIypdomain\fR/ypservers\fR\fR
 .ad
@@ -129,7 +125,6 @@ Lists the servers to which the NIS client is allowed to bind.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/hosts\fR\fR
 .ad
diff --git a/usr/src/man/man1m/ypinit.1m b/usr/src/man/man1m/ypinit.1m
index b0a3a5c74b..92b95dd064 100644
--- a/usr/src/man/man1m/ypinit.1m
+++ b/usr/src/man/man1m/ypinit.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ypinit 1M "20 Dec 2007" "SunOS 5.11" "System Administration Commands"
+.TH YPINIT 1M "Dec 20, 2007"
 .SH NAME
 ypinit \- set up NIS client
 .SH SYNOPSIS
@@ -42,7 +42,6 @@ when run without the \fB-broadcast\fR option.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
@@ -53,7 +52,6 @@ Set up a \fBypclient\fR system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR\fR
 .ad
@@ -64,7 +62,6 @@ Build a master \fBypserver\fR data base.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fImaster_server\fR\fR
 .ad
@@ -77,7 +74,6 @@ Slave data base. \fImaster_server\fR must be the same master configured in the
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/hosts\fR\fR
 .ad
@@ -88,7 +84,6 @@ File in which it is recommended that NIS servers be listed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/yp/binding/\fIdomain\fR/ypservers\fR\fR
 .ad
diff --git a/usr/src/man/man1m/ypmake.1m b/usr/src/man/man1m/ypmake.1m
index 8ad322a89a..df45e11256 100644
--- a/usr/src/man/man1m/ypmake.1m
+++ b/usr/src/man/man1m/ypmake.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ypmake 1M "17 Aug 2006" "SunOS 5.11" "System Administration Commands"
+.TH YPMAKE 1M "Aug 17, 2006"
 .SH NAME
 ypmake \- rebuild NIS database
 .SH SYNOPSIS
@@ -54,34 +54,28 @@ detect this, and will log a warning message. For additional information, see
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/yp\fR\fR
 .ad
 .RS 19n
-.rt  
 Directory containing  \fBNIS\fR configuration files.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc/inet/hosts\fR\fR
 .ad
 .RS 19n
-.rt  
 System hosts file.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/etc\fR\fR
 .ad
 .RS 19n
-.rt  
 Default directory for source files.
 .RE
 
@@ -93,13 +87,12 @@ See \fBattributes\fR(5)  for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/ypmap2src.1m b/usr/src/man/man1m/ypmap2src.1m
index 62123b73fe..56d8d96250 100644
--- a/usr/src/man/man1m/ypmap2src.1m
+++ b/usr/src/man/man1m/ypmap2src.1m
@@ -3,14 +3,14 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ypmap2src 1M "10 Apr 2003" "SunOS 5.11" "System Administration Commands"
+.TH YPMAP2SRC 1M "Apr 10, 2003"
 .SH NAME
 ypmap2src \- convert NIS maps to NIS source files
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/netsvc/yp/ypmap2src\fR [\fB-t\fR] 
-     [ [\fB-c\fR \fIcustom-map-name\fR]]... [\fB-d\fR \fIdomain\fR] \fB-o\fR \fIoutput-directory\fR 
+\fB/usr/lib/netsvc/yp/ypmap2src\fR [\fB-t\fR]
+     [ [\fB-c\fR \fIcustom-map-name\fR]]... [\fB-d\fR \fIdomain\fR] \fB-o\fR \fIoutput-directory\fR
      [ [ \fIsource-file\fR]]...
 .fi
 
@@ -68,12 +68,10 @@ modified the NIS makefile, the equivalent changes must also be made to the
 \fBypmap2src\fR supports the following options:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 18n
-.rt  
 Specifies that \fIcustom-map-name\fR should be converted to a source
 file by running \fBmakedbm\fR \fB-u\fR on it. This is a short cut so that
 simple custom maps can be handled without editing \fBypmap2src\fR.
@@ -81,26 +79,22 @@ simple custom maps can be handled without editing \fBypmap2src\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdomain-name\fR\fR
 .ad
 .RS 18n
-.rt  
  Specifies the domain to convert. The \fIdomain-name\fR can be a fully
-qualified file path, such as \fB/var/yp/a.b.c\fR, or just a domain  	     name,
+qualified file path, such as \fB/var/yp/a.b.c\fR, or just a domain name,
 a.b.c\fB\fR. In the latter case, \fBypmaptosrc\fR looks in \fB/var/yp\fR for
 the domain directory.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIdest\fR\fR
 .ad
 .RS 18n
-.rt  
  Specifies the destination directory for the converted files. A directory other
 than \fB/etc\fR should be specified. The maps generated are copied to the
 correct location, \fB/etc\fR, \fB/etc/security\fR or other source directory, as
@@ -109,12 +103,10 @@ appropriate.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
 .RS 18n
-.rt  
 Specifies that traditional NIS maps, without N2L's \fBLDAP_\fR prefix, should
 be converted. By default, maps with the \fBLDAP_\fR prefix are converted.
 .RE
@@ -125,12 +117,10 @@ be converted. By default, maps with the \fBLDAP_\fR prefix are converted.
 \fBypmap2src\fR supports the following operands:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsource-file\fR\fR
 .ad
 .RS 15n
-.rt  
 Lists the standard source files to convert. If this option is not given, then
 all the standard source files, plus any custom files pecified by the \fB-c\fR
 option, are converted.
@@ -144,13 +134,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityObsolete
+Interface Stability	Obsolete
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/yppoll.1m b/usr/src/man/man1m/yppoll.1m
index 356a833b36..65ff3cb723 100644
--- a/usr/src/man/man1m/yppoll.1m
+++ b/usr/src/man/man1m/yppoll.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH yppoll 1M "14 Sep 1992" "SunOS 5.11" "System Administration Commands"
+.TH YPPOLL 1M "Sep 14, 1992"
 .SH NAME
 yppoll \- return current version of a NIS map at a NIS server host
 .SH SYNOPSIS
@@ -20,23 +20,19 @@ is, and which host is the master NIS server for the named map.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-d\fR\fB \fR\fIypdomain\fR\fR
 .ad
 .RS 15n
-.rt  
 Use \fIypdomain\fR instead of the default domain.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB\fR\fB-h\fR\fB \fR\fIhost\fR\fR
 .ad
 .RS 15n
-.rt  
 Ask the \fBypserv\fR process at \fIhost\fR about the map parameters. If
 \fIhost\fR is not specified, the NIS server for the local host is used. That
 is, the default host is the one returned by \fBypwhich\fR(1).
diff --git a/usr/src/man/man1m/yppush.1m b/usr/src/man/man1m/yppush.1m
index f24d8fdd77..a49bca9027 100644
--- a/usr/src/man/man1m/yppush.1m
+++ b/usr/src/man/man1m/yppush.1m
@@ -3,13 +3,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH yppush 1M "26 Aug 1999" "SunOS 5.11" "System Administration Commands"
+.TH YPPUSH 1M "Aug 26, 1999"
 .SH NAME
 yppush \- force propagation of changed NIS map
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/netsvc/yp/yppush\fR [\fB-v\fR] [\fB-h\fR \fIhost\fR] [\fB-d\fR \fIdomain\fR] 
+\fB/usr/lib/netsvc/yp/yppush\fR [\fB-v\fR] [\fB-h\fR \fIhost\fR] [\fB-d\fR \fIdomain\fR]
      [\fB-p\fR \fI#parallel-xfrs\fR] \fImapname\fR
 .fi
 
@@ -42,45 +42,37 @@ service.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdomain\fR\fR
 .ad
 .RS 21n
-.rt  
 Specifies a \fIdomain\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIhost\fR\fR
 .ad
 .RS 21n
-.rt  
 Propagates only to the named \fIhost\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fI#parallel-xfrs\fR\fR
 .ad
 .RS 21n
-.rt  
 Allows the specified number of map transfers to occur in parallel.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 21n
-.rt  
 Verbose.  This prints messages when each server is called, and for each
 response. If this flag is omitted, only error messages are printed.
 .RE
@@ -88,7 +80,6 @@ response. If this flag is omitted, only error messages are printed.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/yp\fR\fR
 .ad
@@ -99,7 +90,6 @@ Directory where \fBNIS\fR configuration files reside.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/yp/\fIdomain\fR/ypservers.\|{\fIdir\fR,\fI pag\|\fR}\fR\fR
 .ad
diff --git a/usr/src/man/man1m/ypserv.1m b/usr/src/man/man1m/ypserv.1m
index f24fa4824b..bdf2f21574 100644
--- a/usr/src/man/man1m/ypserv.1m
+++ b/usr/src/man/man1m/ypserv.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ypserv 1M "15 Dec 2004" "SunOS 5.11" "System Administration Commands"
+.TH YPSERV 1M "Dec 15, 2004"
 .SH NAME
 ypserv, ypxfrd \- NIS server and binder processes
 .SH SYNOPSIS
@@ -14,7 +14,7 @@ ypserv, ypxfrd \- NIS server and binder processes
 
 .LP
 .nf
-\fB/usr/lib/netsvc/yp/ypxfrd\fR 
+\fB/usr/lib/netsvc/yp/ypxfrd\fR
 .fi
 
 .SH DESCRIPTION
@@ -75,36 +75,30 @@ A number of special keys in the \fBDBM\fR files can alter the way in which
 \fBypserv\fR operates. The keys of interest are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBYP_INTERDOMAIN\fR\fR
 .ad
 .RS 21n
-.rt  
 The presence of this key causes \fBypserv\fR to forward to a \fBDNS\fR server
 host lookups that cannot be satisfied by the \fBDBM\fR files.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBYP_SECURE\fR\fR
 .ad
 .RS 21n
-.rt  
 This key causes \fBypserv\fR to answer only questions coming from clients on
 reserved ports.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBYP_MULTI_\fR\fIhostname\fR\fR
 .ad
 .RS 21n
-.rt  
 This is a special key in the form, \fBYP_MULTI_\fR\fIhostname
 addr1,...,addrN.\fR A client looking for \fIhostname\fR receives the closest
 address.
@@ -175,12 +169,10 @@ on subsequent \fBypxfrd\fR operations.
 .SS "ypserv"
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
 .RS 7n
-.rt  
 The \fBNIS\fR service should go to the \fBDNS\fR for more host information.
 This requires the existence of a correct \fB/etc/resolv.conf\fR file pointing
 to a \fBDNS\fR server. This option turns on \fBDNS\fR forwarding regardless of
@@ -191,12 +183,10 @@ See \fBmakedbm\fR(1M). In the absence of an \fB/etc/resolv.conf\fR file,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 7n
-.rt  
 If in N2L mode, initialize the NIS related parts of the \fBDIT\fR based on the
 current, non \fBLDAP_\fR prefixed, map files. The \fBLDAP_\fR prefixed maps are
 not created or updated. If you require that \fBLDAP_\fR prefixed maps be
@@ -209,36 +199,30 @@ then errors will occur, as entries are written to nonexistent containers.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR\fR
 .ad
 .RS 7n
-.rt  
 Identical to \fB-i\fR, except that any missing domain and container objects are
 created.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
 .RS 7n
-.rt  
 If in N2L mode, then refresh the \fBLDAP_\fR prefixed map files based on the
 contents of the \fBDIT\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-ir\fR\fR
 .ad
 .RS 7n
-.rt  
 If both \fB-i\fR and \fB-r\fR are specified in N2L mode, then the \fBDIT\fR
 will first be initialized from the current non \fBLDAP_\fR prefixed map files.
 A new set of \fBLDAP_\fR prefixed maps will then be generated from the contents
@@ -248,24 +232,20 @@ moving from traditional NIS to N2L mode NIS.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-Ir\fR\fR
 .ad
 .RS 7n
-.rt  
 Identical to \fB-ir\fR, except that any missing domain and container objects
 are created.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 7n
-.rt  
 Operate in the verbose mode, printing diagnostic messages to stderr.
 .RE
 
@@ -289,7 +269,6 @@ when it is run.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/yp/securenets\fR\fR
 .ad
@@ -302,7 +281,6 @@ served domain. It is read at startup time by both \fBypserv\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/yp/ypserv.log\fR\fR
 .ad
@@ -314,7 +292,6 @@ information is written to it when error conditions arise.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/yp/binding/domainname/ypservers\fR\fR
 .ad
diff --git a/usr/src/man/man1m/ypset.1m b/usr/src/man/man1m/ypset.1m
index f7bf025a1e..857aadfa6f 100644
--- a/usr/src/man/man1m/ypset.1m
+++ b/usr/src/man/man1m/ypset.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ypset 1M "14 Sep 1992" "SunOS 5.11" "System Administration Commands"
+.TH YPSET 1M "Sep 14, 1992"
 .SH NAME
 ypset \- point ypbind at a particular server
 .SH SYNOPSIS
@@ -69,23 +69,19 @@ Refer to \fBypfiles\fR(4) for an overview of the NIS name service.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fI ypdomain\fR\fR
 .ad
 .RS 15n
-.rt  
 Use \fIypdomain\fR, instead of the default domain.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR\fI host\fR\fR
 .ad
 .RS 15n
-.rt  
 Set \fBypbind\fR's binding on \fIhost\fR, instead of locally. Specify
 \fIhost\fR as a name.
 .RE
diff --git a/usr/src/man/man1m/ypstart.1m b/usr/src/man/man1m/ypstart.1m
index 1b19bf889d..839bf100ce 100644
--- a/usr/src/man/man1m/ypstart.1m
+++ b/usr/src/man/man1m/ypstart.1m
@@ -4,18 +4,18 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ypstart 1M "24 Oct 1996" "SunOS 5.11" "System Administration Commands"
+.TH YPSTART 1M "Oct 24, 1996"
 .SH NAME
 ypstart, ypstop \- Start and stop NIS services
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/netsvc/yp/ypstart\fR 
+\fB/usr/lib/netsvc/yp/ypstart\fR
 .fi
 
 .LP
 .nf
-\fB/usr/lib/netsvc/yp/ypstop\fR 
+\fB/usr/lib/netsvc/yp/ypstop\fR
 .fi
 
 .SH DESCRIPTION
diff --git a/usr/src/man/man1m/ypxfr.1m b/usr/src/man/man1m/ypxfr.1m
index 70b7fd3e16..42e41ac6a7 100644
--- a/usr/src/man/man1m/ypxfr.1m
+++ b/usr/src/man/man1m/ypxfr.1m
@@ -4,14 +4,14 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ypxfr 1M "11 Mar 1998" "SunOS 5.11" "System Administration Commands"
+.TH YPXFR 1M "Mar 11, 1998"
 .SH NAME
 ypxfr, ypxfr_1perday, ypxfr_1perhour, ypxfr_2perday \- transfer NIS map from a
 NIS server to host
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/netsvc/yp/ypxfr\fR [\fB-c\fR] [\fB-f\fR] [\fB-C\fR \fItid\fR \fIprog\fR \fIserver\fR] 
+\fB/usr/lib/netsvc/yp/ypxfr\fR [\fB-c\fR] [\fB-f\fR] [\fB-C\fR \fItid\fR \fIprog\fR \fIserver\fR]
      [\fB-d\fR \fIypdomain\fR] [\fB-h\fR \fIhost\fR] [\fB-s\fR \fIypdomain\fR] \fImapname\fR
 .fi
 
@@ -51,12 +51,10 @@ Refer to \fBypfiles\fR(4) for an overview of the NIS name service.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
 .RS 22n
-.rt  
 Do not send a "Clear current map" request to the local \fBypserv\fR process.
 Use this flag if \fBypserv\fR is not running locally at the time you are
 running \fBypxfr\fR. Otherwise, \fBypxfr\fR complains that it cannot
@@ -65,24 +63,20 @@ communicate with the local \fBypserv\fR, and the transfer fails.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 22n
-.rt  
 Force the transfer to occur even if the version at the master is not more
 recent than the local version.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR\fI tid prog server\fR\fR
 .ad
 .RS 22n
-.rt  
 This option is for use \fIonly\fR by \fBypserv\fR. When \fBypserv\fR starts
 \fBypxfr\fR, it specifies that \fBypxfr\fR should call back a \fByppush\fR
 process at the host \fIserver\fR, registered as program number \fIprog\fR, and
@@ -91,23 +85,19 @@ waiting for a response to transaction \fItid\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fI ypdomain\fR\fR
 .ad
 .RS 22n
-.rt  
 Specify a domain other than the default domain.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-h\fR \fIhost\fR\fR
 .ad
 .RS 22n
-.rt  
 Get the map from \fIhost\fR, regardless of the master. If \fIhost\fR is not
 specified, \fBypxfr\fR asks the \fBNIS\fR service for the name of the master,
 and tries to get the map from there. \fIhost\fR must be a valid host name.
@@ -115,12 +105,10 @@ and tries to get the map from there. \fIhost\fR must be a valid host name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fI ypdomain\fR\fR
 .ad
 .RS 22n
-.rt  
 Specify a source domain from which to transfer a map that should be the same
 across domains.
 .RE
@@ -128,7 +116,6 @@ across domains.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/yp/ypxfr.log\fR\fR
 .ad
@@ -139,7 +126,6 @@ Log file
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/netsvc/yp/ypxfr_1perday\fR\fR
 .ad
@@ -150,7 +136,6 @@ Script to run one transfer per day, for use with \fBcron\fR(1M)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/netsvc/yp/ypxfr_2perday\fR\fR
 .ad
@@ -161,7 +146,6 @@ Script to run two transfer per day, for use with \fBcron\fR(1M)
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/lib/netsvc/yp/ypxfr_1perhour\fR\fR
 .ad
@@ -172,7 +156,6 @@ Script for hourly transfers of volatile maps
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/var/yp/\fR\fIypdomain\fR\fR
 .ad
@@ -183,7 +166,6 @@ Script for hourly transfers of volatile maps
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/spool/cron/crontabs/root\fR\fR
 .ad
diff --git a/usr/src/man/man1m/zdb.1m b/usr/src/man/man1m/zdb.1m
index 661165d584..d5971365b8 100644
--- a/usr/src/man/man1m/zdb.1m
+++ b/usr/src/man/man1m/zdb.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH zdb 1M "31 Oct 2005" "SunOS 5.11" "System Administration Commands"
+.TH ZDB 1M "Oct 31, 2005"
 .SH NAME
 zdb \- ZFS debugger
 .SH SYNOPSIS
@@ -33,34 +33,28 @@ at any time.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 The pool is consistent.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 An error was detected.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Invalid command line options were specified.
 .RE
 
@@ -72,13 +66,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUnstable
+Interface Stability	Unstable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/zdump.1m b/usr/src/man/man1m/zdump.1m
index 9d63653941..d9d69b2bf6 100644
--- a/usr/src/man/man1m/zdump.1m
+++ b/usr/src/man/man1m/zdump.1m
@@ -4,7 +4,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH zdump 1M "3 Jan 2006" "SunOS 5.11" "System Administration Commands"
+.TH ZDUMP 1M "Jan 3, 2006"
 .SH NAME
 zdump \- time zone dumper
 .SH SYNOPSIS
@@ -31,23 +31,19 @@ time routines in \fBlibc\fR. See \fBctime\fR(3C) and \fBmktime\fR(3C).
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--\fR\fIversion\fR\fR
 .ad
 .RS 22n
-.rt  
 Outputs version information and exits.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 22n
-.rt  
 Displays the entire contents of the time zone database file for \fIzonename\fR.
 Prints the time at the lowest possible time value; the time one day after the
 lowest possible time value; the times both one second before and exactly at
@@ -61,12 +57,10 @@ otherwise.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR [\fIloyear\fR],\fIhiyear\fR\fR
 .ad
 .RS 22n
-.rt  
 Cuts off the verbose output near the start of the given year(s) . By default,
 the program cuts off verbose output near the start of the years -500 and 2500.
 .RE
@@ -77,35 +71,29 @@ the program cuts off verbose output near the start of the years -500 and 2500.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 An error occurred.
 .RE
 
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/share/lib/zoneinfo\fR\fR
 .ad
 .RS 27n
-.rt  
 Standard zone information directory
 .RE
 
@@ -117,13 +105,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityStable
+Interface Stability	Stable
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/zfs.1m b/usr/src/man/man1m/zfs.1m
index 284edfb961..fc99b65e42 100644
--- a/usr/src/man/man1m/zfs.1m
+++ b/usr/src/man/man1m/zfs.1m
@@ -8,7 +8,7 @@
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
 .\" Copyright 2011 Nexenta Systems, Inc.  All rights reserved.
 .\" Copyright 2011 by Delphix.  All rights reserved.
-.TH zfs 1M "24 Sep 2009" "SunOS 5.11" "System Administration Commands"
+.TH ZFS 1M "Sep 24, 2009"
 .SH NAME
 zfs \- configures ZFS file systems
 .SH SYNOPSIS
@@ -39,7 +39,7 @@ zfs \- configures ZFS file systems
 
 .LP
 .nf
-\fBzfs\fR \fBsnapshot\fR [\fB-r\fR] [\fB-o\fR \fIproperty\fR=\fIvalue\fR]... 
+\fBzfs\fR \fBsnapshot\fR [\fB-r\fR] [\fB-o\fR \fIproperty\fR=\fIvalue\fR]...
       \fIfilesystem@snapname\fR|\fIvolume@snapname\fR
 .fi
 
@@ -60,7 +60,7 @@ zfs \- configures ZFS file systems
 
 .LP
 .nf
-\fBzfs\fR \fBrename\fR \fIfilesystem\fR|\fIvolume\fR|\fIsnapshot\fR 
+\fBzfs\fR \fBrename\fR \fIfilesystem\fR|\fIvolume\fR|\fIsnapshot\fR
      \fIfilesystem\fR|\fIvolume\fR|\fIsnapshot\fR
 .fi
 
@@ -120,7 +120,7 @@ zfs \- configures ZFS file systems
 
 .LP
 .nf
-\fBzfs\fR \fBmount\fR 
+\fBzfs\fR \fBmount\fR
 .fi
 
 .LP
@@ -165,7 +165,7 @@ zfs \- configures ZFS file systems
 
 .LP
 .nf
-\fBzfs\fR \fBallow\fR [\fB-ldug\fR] "\fIeveryone\fR"|\fIuser\fR|\fIgroup\fR[,...] \fIperm\fR|\fI@setname\fR[,...] 
+\fBzfs\fR \fBallow\fR [\fB-ldug\fR] "\fIeveryone\fR"|\fIuser\fR|\fIgroup\fR[,...] \fIperm\fR|\fI@setname\fR[,...]
      \fIfilesystem\fR|\fIvolume\fR
 .fi
 
@@ -186,7 +186,7 @@ zfs \- configures ZFS file systems
 
 .LP
 .nf
-\fBzfs\fR \fBunallow\fR [\fB-rldug\fR] "\fIeveryone\fR"|\fIuser\fR|\fIgroup\fR[,...] [\fIperm\fR|@\fIsetname\fR[,... ]] 
+\fBzfs\fR \fBunallow\fR [\fB-rldug\fR] "\fIeveryone\fR"|\fIuser\fR|\fIgroup\fR[,...] [\fIperm\fR|@\fIsetname\fR[,... ]]
      \fIfilesystem\fR|\fIvolume\fR
 .fi
 
@@ -242,7 +242,6 @@ where the maximum length of a dataset name is \fBMAXNAMELEN\fR (256 bytes).
 A dataset can be one of the following:
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfile system\fR\fR
 .ad
@@ -258,7 +257,6 @@ free space.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIvolume\fR\fR
 .ad
@@ -271,7 +269,6 @@ most environments.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIsnapshot\fR\fR
 .ad
@@ -443,7 +440,6 @@ dataset. These properties can be neither set, nor inherited. Native properties
 apply to all dataset types unless otherwise noted.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBavailable\fR\fR
 .ad
@@ -460,7 +456,6 @@ This property can also be referred to by its shortened column name,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcompressratio\fR\fR
 .ad
@@ -477,7 +472,6 @@ Compression can be turned on by running: \fBzfs set compression=on
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcreation\fR\fR
 .ad
@@ -488,7 +482,6 @@ The time this dataset was created.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdefer_destroy\fR\fR
 .ad
@@ -501,7 +494,6 @@ by using the \fBzfs destroy\fR \fB-d\fR command. Otherwise, the property is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmounted\fR\fR
 .ad
@@ -513,7 +505,6 @@ property can be either \fByes\fR or \fBno\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBorigin\fR\fR
 .ad
@@ -526,7 +517,6 @@ options) so long as a clone exists.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBreferenced\fR\fR
 .ad
@@ -543,7 +533,6 @@ This property can also be referred to by its shortened column name,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrefcompressratio\fR\fR
 .ad
@@ -556,7 +545,6 @@ property.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBtype\fR\fR
 .ad
@@ -567,7 +555,6 @@ The type of dataset: \fBfilesystem\fR, \fBvolume\fR, or \fBsnapshot\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBused\fR\fR
 .ad
@@ -597,7 +584,6 @@ immediately.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBusedby*\fR\fR
 .ad
@@ -612,7 +598,6 @@ on \fBzpool\fR "version 13" pools.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBusedbychildren\fR\fR
 .ad
@@ -624,7 +609,6 @@ all the dataset's children were destroyed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBusedbydataset\fR\fR
 .ad
@@ -637,7 +621,6 @@ destroying any necessary snapshots or descendents).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBusedbyrefreservation\fR\fR
 .ad
@@ -649,7 +632,6 @@ would be freed if the \fBrefreservation\fR was removed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBusedbysnapshots\fR\fR
 .ad
@@ -663,7 +645,6 @@ properties because space can be shared by multiple snapshots.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBuserused@\fR\fIuser\fR\fR
 .ad
@@ -709,7 +690,6 @@ following forms:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBuserrefs\fR\fR
 .ad
@@ -721,7 +701,6 @@ are set by using the \fBzfs hold\fR command.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgroupused@\fR\fIgroup\fR\fR
 .ad
@@ -738,7 +717,6 @@ allow\fR, can access all groups' usage.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvolblocksize\fR=\fIblocksize\fR\fR
 .ad
@@ -759,7 +737,6 @@ The following native properties can be used to change the behavior of a
 \fBZFS\fR dataset.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaclinherit\fR=\fBdiscard\fR | \fBnoallow\fR | \fBrestricted\fR |
 \fBpassthrough\fR | \fBpassthrough-x\fR\fR
@@ -788,7 +765,6 @@ mode from the application.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaclmode\fR=\fBdiscard\fR | \fBgroupmask\fR | \fBpassthrough\fR\fR
 .ad
@@ -807,7 +783,6 @@ represent the new mode of the file or directory.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBatime\fR=\fBon\fR | \fBoff\fR\fR
 .ad
@@ -821,7 +796,6 @@ and other similar utilities. The default value is \fBon\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcanmount\fR=\fBon\fR | \fBoff\fR | \fBnoauto\fR\fR
 .ad
@@ -847,7 +821,6 @@ This property is not inherited.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBchecksum\fR=\fBon\fR | \fBoff\fR | \fBfletcher2,\fR| \fBfletcher4\fR |
 \fBsha256\fR\fR
@@ -865,7 +838,6 @@ Changing this property affects only newly-written data.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcompression\fR=\fBon\fR | \fBoff\fR | \fBlzjb\fR | \fBgzip\fR |
 \fBgzip-\fR\fIN\fR\fR
@@ -887,7 +859,6 @@ This property can also be referred to by its shortened column name
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcopies\fR=\fB1\fR | \fB2\fR | \fB3\fR\fR
 .ad
@@ -906,7 +877,6 @@ property at file system creation time by using the \fB-o\fR
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdevices\fR=\fBon\fR | \fBoff\fR\fR
 .ad
@@ -918,7 +888,6 @@ value is \fBon\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBexec\fR=\fBon\fR | \fBoff\fR\fR
 .ad
@@ -930,7 +899,6 @@ default value is \fBon\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmountpoint\fR=\fIpath\fR | \fBnone\fR | \fBlegacy\fR\fR
 .ad
@@ -950,7 +918,6 @@ new location.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnbmand\fR=\fBon\fR | \fBoff\fR\fR
 .ad
@@ -964,7 +931,6 @@ property only take effect when the file system is umounted and remounted. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBprimarycache\fR=\fBall\fR | \fBnone\fR | \fBmetadata\fR\fR
 .ad
@@ -979,7 +945,6 @@ is set to \fBmetadata\fR, then only metadata is cached. The default value is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBquota\fR=\fIsize\fR | \fBnone\fR\fR
 .ad
@@ -997,7 +962,6 @@ implicit quota.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBuserquota@\fR\fIuser\fR=\fIsize\fR | \fBnone\fR\fR
 .ad
@@ -1047,7 +1011,6 @@ displayed by \fBzfs get all\fR. The user's name must be appended after the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBgroupquota@\fR\fIgroup\fR=\fIsize\fR | \fBnone\fR\fR
 .ad
@@ -1063,7 +1026,6 @@ allow\fR, can get and set all groups' quotas.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBreadonly\fR=\fBon\fR | \fBoff\fR\fR
 .ad
@@ -1077,7 +1039,6 @@ This property can also be referred to by its shortened column name,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrecordsize\fR=\fIsize\fR\fR
 .ad
@@ -1106,7 +1067,6 @@ This property can also be referred to by its shortened column name,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrefquota\fR=\fIsize\fR | \fBnone\fR\fR
 .ad
@@ -1119,7 +1079,6 @@ by descendents, including file systems and snapshots.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrefreservation\fR=\fIsize\fR | \fBnone\fR\fR
 .ad
@@ -1142,7 +1101,6 @@ This property can also be referred to by its shortened column name,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBreservation\fR=\fIsize\fR | \fBnone\fR\fR
 .ad
@@ -1160,7 +1118,6 @@ This property can also be referred to by its shortened column name,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsecondarycache\fR=\fBall\fR | \fBnone\fR | \fBmetadata\fR\fR
 .ad
@@ -1175,7 +1132,6 @@ value is \fBall\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsetuid\fR=\fBon\fR | \fBoff\fR\fR
 .ad
@@ -1187,7 +1143,6 @@ default value is \fBon\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBshareiscsi\fR=\fBon\fR | \fBoff\fR\fR
 .ad
@@ -1206,7 +1161,6 @@ setting this property on a file system has no direct effect.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsharesmb\fR=\fBon\fR | \fBoff\fR | \fIopts\fR\fR
 .ad
@@ -1245,7 +1199,6 @@ are unshared.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsharenfs\fR=\fBon\fR | \fBoff\fR | \fIopts\fR\fR
 .ad
@@ -1269,7 +1222,6 @@ unshared.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlogbias\fR = \fBlatency\fR | \fBthroughput\fR\fR
 .ad
@@ -1285,7 +1237,6 @@ efficient use of resources.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsnapdir\fR=\fBhidden\fR | \fBvisible\fR\fR
 .ad
@@ -1298,7 +1249,6 @@ the file system as discussed in the "Snapshots" section. The default value is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBversion\fR=\fB1\fR | \fB2\fR | \fBcurrent\fR\fR
 .ad
@@ -1311,7 +1261,6 @@ version. This property can only be set to later supported versions. See the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvolsize\fR=\fIsize\fR\fR
 .ad
@@ -1342,7 +1291,6 @@ reflected in the reservation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvscan\fR=\fBon\fR | \fBoff\fR\fR
 .ad
@@ -1356,7 +1304,6 @@ service must also be enabled for virus scanning to occur. The default value is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBxattr\fR=\fBon\fR | \fBoff\fR\fR
 .ad
@@ -1368,7 +1315,6 @@ default value is \fBon\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzoned\fR=\fBon\fR | \fBoff\fR\fR
 .ad
@@ -1389,7 +1335,6 @@ features being supported, the new file system will have the default values for
 these properties.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcasesensitivity\fR=\fBsensitive\fR | \fBinsensitive\fR | \fBmixed\fR\fR
 .ad
@@ -1411,7 +1356,6 @@ product. For more information about the \fBmixed\fR value behavior, see the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnormalization\fR = \fBnone\fR | \fBformC\fR | \fBformD\fR | \fBformKC\fR
 | \fBformKD\fR\fR
@@ -1430,7 +1374,6 @@ cannot be changed after the file system is created.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fButf8only\fR=\fBon\fR | \fBoff\fR\fR
 .ad
@@ -1534,7 +1477,6 @@ All subcommands that modify state are logged persistently to the pool in their
 original form.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs ?\fR\fR
 .ad
@@ -1545,7 +1487,6 @@ Displays a help message.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs create\fR [\fB-p\fR] [\fB-o\fR \fIproperty\fR=\fIvalue\fR] ...
 \fIfilesystem\fR\fR
@@ -1556,7 +1497,6 @@ Creates a new \fBZFS\fR file system. The file system is automatically mounted
 according to the \fBmountpoint\fR property inherited from the parent.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
@@ -1571,7 +1511,6 @@ operation completes successfully.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIproperty\fR=\fIvalue\fR\fR
 .ad
@@ -1588,7 +1527,6 @@ property is specified in multiple \fB-o\fR options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs create\fR [\fB-ps\fR] [\fB-b\fR \fIblocksize\fR] [\fB-o\fR
 \fIproperty\fR=\fIvalue\fR] ... \fB-V\fR \fIsize\fR \fIvolume\fR\fR
@@ -1604,7 +1542,6 @@ exported by the device. By default, a reservation of equal size is created.
 the volume has an integral number of blocks regardless of \fIblocksize\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
@@ -1619,7 +1556,6 @@ operation completes successfully.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
@@ -1631,7 +1567,6 @@ Properties section for more information about sparse volumes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIproperty\fR=\fIvalue\fR\fR
 .ad
@@ -1646,7 +1581,6 @@ multiple \fB-o\fR options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-b\fR \fIblocksize\fR\fR
 .ad
@@ -1661,7 +1595,6 @@ behavior is undefined.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs destroy\fR [\fB-rRf\fR] \fIfilesystem\fR|\fIvolume\fR\fR
 .ad
@@ -1673,7 +1606,6 @@ mounted, and refuses to destroy a dataset that has active dependents (children
 or clones).
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -1684,7 +1616,6 @@ Recursively destroy all children.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR\fR
 .ad
@@ -1696,7 +1627,6 @@ target hierarchy.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -1713,7 +1643,6 @@ behavior for mounted file systems in use.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs destroy\fR [\fB-rRd\fR] \fIsnapshot\fR\fR
 .ad
@@ -1729,7 +1658,6 @@ deferred deletion. In this state, it exists as a usable, visible snapshot until
 both of the preconditions listed above are met, at which point it is destroyed.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -1740,7 +1668,6 @@ Defer snapshot deletion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -1752,7 +1679,6 @@ descendent file systems.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR\fR
 .ad
@@ -1765,7 +1691,6 @@ Recursively destroy all dependents.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs snapshot\fR [\fB-r\fR] [\fB-o\fR \fIproperty\fR=\fIvalue\fR] ...
 \fIfilesystem@snapname\fR|\fIvolume@snapname\fR\fR
@@ -1777,7 +1702,6 @@ successful system calls to the file system are part of the snapshot. See the
 "Snapshots" section for details.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -1790,7 +1714,6 @@ time.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIproperty\fR=\fIvalue\fR\fR
 .ad
@@ -1803,7 +1726,6 @@ Sets the specified property; see \fBzfs create\fR for details.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs rollback\fR [\fB-rRf\fR] \fIsnapshot\fR\fR
 .ad
@@ -1822,7 +1744,6 @@ either of these options. To completely roll back a recursive snapshot, you must
 rollback the individual child snapshots.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -1833,7 +1754,6 @@ Recursively destroy any snapshots more recent than the one specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR\fR
 .ad
@@ -1845,7 +1765,6 @@ snapshots.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -1859,7 +1778,6 @@ that are to be destroyed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs clone\fR [\fB-p\fR] [\fB-o\fR \fIproperty\fR=\fIvalue\fR] ...
 \fIsnapshot\fR \fIfilesystem\fR|\fIvolume\fR\fR
@@ -1871,7 +1789,6 @@ The target dataset can be located anywhere in the \fBZFS\fR hierarchy, and is
 created as the same type as the original.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
@@ -1885,7 +1802,6 @@ operation completes successfully.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIproperty\fR=\fIvalue\fR\fR
 .ad
@@ -1898,7 +1814,6 @@ Sets the specified property; see \fBzfs create\fR for details.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs promote\fR \fIclone-filesystem\fR\fR
 .ad
@@ -1920,7 +1835,6 @@ any conflicting snapshots.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs rename\fR \fIfilesystem\fR|\fIvolume\fR|\fIsnapshot\fR\fR
 .ad
@@ -1943,7 +1857,6 @@ second argument. Renamed file systems can inherit new mount points, in which
 case they are unmounted and remounted at the new mount point.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
@@ -1958,7 +1871,6 @@ from their parent.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs rename\fR \fB-r\fR \fIsnapshot\fR \fIsnapshot\fR\fR
 .ad
@@ -1970,7 +1882,6 @@ only dataset that can be renamed recursively.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs\fR \fBlist\fR [\fB-r\fR|\fB-d\fR \fIdepth\fR] [\fB-H\fR] [\fB-o\fR
 \fIproperty\fR[,\fI\&...\fR]] [ \fB-t\fR \fItype\fR[,\fI\&...\fR]] [ \fB-s\fR
@@ -1987,7 +1898,6 @@ default is \fBoff\fR) . The following fields are displayed,
 \fBname,used,available,referenced,mountpoint\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-H\fR\fR
 .ad
@@ -1999,7 +1909,6 @@ tab instead of arbitrary white space.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -2010,7 +1919,6 @@ Recursively display any children of the dataset on the command line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdepth\fR\fR
 .ad
@@ -2023,7 +1931,6 @@ children.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIproperty\fR\fR
 .ad
@@ -2061,7 +1968,6 @@ filesystem,volume\fR syntax.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIproperty\fR\fR
 .ad
@@ -2105,7 +2011,6 @@ preserved.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR \fIproperty\fR\fR
 .ad
@@ -2116,7 +2021,6 @@ Same as the \fB-s\fR option, but sorts by property in descending order.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fItype\fR\fR
 .ad
@@ -2131,7 +2035,6 @@ specifying \fB-t snapshot\fR displays only snapshots.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs set\fR \fIproperty\fR=\fIvalue\fR
 \fIfilesystem\fR|\fIvolume\fR|\fIsnapshot\fR ...\fR
@@ -2150,7 +2053,6 @@ Properties" section.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs get\fR [\fB-r\fR|\fB-d\fR \fIdepth\fR] [\fB-Hp\fR] [\fB-o\fR
 \fIfield\fR[,...] [\fB-s\fR \fIsource\fR[,...] "\fIall\fR" |
@@ -2181,7 +2083,6 @@ The special value \fBall\fR can be used to display all properties that apply to
 the given dataset's type (filesystem, volume, or snapshot).
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -2192,7 +2093,6 @@ Recursively display properties for any children.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdepth\fR\fR
 .ad
@@ -2205,7 +2105,6 @@ children.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-H\fR\fR
 .ad
@@ -2218,7 +2117,6 @@ arbitrary amount of space.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIfield\fR\fR
 .ad
@@ -2230,7 +2128,6 @@ is the default value.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIsource\fR\fR
 .ad
@@ -2244,7 +2141,6 @@ is all sources.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
@@ -2257,7 +2153,6 @@ Display numbers in parseable (exact) values.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs inherit\fR [\fB-r\fR] \fIproperty\fR
 \fIfilesystem\fR|\fIvolume\fR|\fIsnapshot\fR ...\fR
@@ -2270,7 +2165,6 @@ no ancestor has the property set, then the default value is used. See the
 properties can be inherited.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -2283,7 +2177,6 @@ Recursively inherit the given property for all children.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs upgrade\fR [\fB-v\fR]\fR
 .ad
@@ -2294,7 +2187,6 @@ Displays a list of file systems that are not the most recent version.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs upgrade\fR [\fB-r\fR] [\fB-V\fR \fIversion\fR] [\fB-a\fR |
 \fIfilesystem\fR]\fR
@@ -2314,7 +2206,6 @@ and the pool version must be upgraded before the file system version can be
 upgraded.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -2325,7 +2216,6 @@ Upgrade all file systems on all imported pools.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfilesystem\fR\fR
 .ad
@@ -2336,7 +2226,6 @@ Upgrade the specified file system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -2347,7 +2236,6 @@ Upgrade the specified file system and all descendent file systems
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR \fIversion\fR\fR
 .ad
@@ -2363,7 +2251,6 @@ supported by this software.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs userspace\fR [\fB-niHp\fR] [\fB-o\fR \fIfield\fR[,...]] [\fB-sS\fR
 \fIfield\fR]... [\fB-t\fR \fItype\fR [,...]] \fIfilesystem\fR |
@@ -2376,7 +2263,6 @@ filesystem or snapshot. This corresponds to the \fBuserused@\fR\fIuser\fR and
 \fBuserquota@\fR\fIuser\fR properties.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -2387,7 +2273,6 @@ Print numeric ID instead of user/group name.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-H\fR\fR
 .ad
@@ -2398,7 +2283,6 @@ Do not print headers, use tab-delimited output.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
@@ -2409,7 +2293,6 @@ Use exact (parseable) numeric output.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIfield\fR[,...]\fR
 .ad
@@ -2421,7 +2304,6 @@ Display only the specified fields from the following set,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIfield\fR\fR
 .ad
@@ -2434,7 +2316,6 @@ multiple times to sort first by one field, then by another. The default is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-S\fR \fIfield\fR\fR
 .ad
@@ -2445,7 +2326,6 @@ Sort by this field in reverse order. See \fB-s\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR \fItype\fR[,...]\fR
 .ad
@@ -2461,7 +2341,6 @@ The default can be changed to include group types.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
@@ -2481,7 +2360,6 @@ will report that the POSIX entity has the total usage and quota for both.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs groupspace\fR [\fB-niHp\fR] [\fB-o\fR \fIfield\fR[,...]] [\fB-sS\fR
 \fIfield\fR]... [\fB-t\fR \fItype\fR [,...]] \fIfilesystem\fR |
@@ -2504,7 +2382,6 @@ except that the default types to display are \fB-t posixgroup,smbgroup\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs mount\fR\fR
 .ad
@@ -2515,7 +2392,6 @@ Displays all \fBZFS\fR file systems currently mounted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs mount\fR [\fB-vO\fR] [\fB-o\fR \fIoptions\fR] \fB-a\fR |
 \fIfilesystem\fR\fR
@@ -2526,7 +2402,6 @@ Mounts \fBZFS\fR file systems. Invoked automatically as part of the boot
 process.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIoptions\fR\fR
 .ad
@@ -2539,7 +2414,6 @@ details.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-O\fR\fR
 .ad
@@ -2550,7 +2424,6 @@ Perform an overlay mount. See \fBmount\fR(1M) for more information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -2561,7 +2434,6 @@ Report mount progress.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -2573,7 +2445,6 @@ the boot process.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfilesystem\fR\fR
 .ad
@@ -2586,7 +2457,6 @@ Mount the specified filesystem.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs unmount\fR [\fB-f\fR] \fB-a\fR | \fIfilesystem\fR|\fImountpoint\fR\fR
 .ad
@@ -2596,7 +2466,6 @@ Unmounts currently mounted \fBZFS\fR file systems. Invoked automatically as
 part of the shutdown process.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -2607,7 +2476,6 @@ Forcefully unmount the file system, even if it is currently in use.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -2619,7 +2487,6 @@ the boot process.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfilesystem\fR|\fImountpoint\fR\fR
 .ad
@@ -2633,7 +2500,6 @@ Unmount the specified filesystem. The command can also be given a path to a
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs share\fR \fB-a\fR | \fIfilesystem\fR\fR
 .ad
@@ -2642,7 +2508,6 @@ Unmount the specified filesystem. The command can also be given a path to a
 Shares available \fBZFS\fR file systems.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -2654,7 +2519,6 @@ the boot process.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfilesystem\fR\fR
 .ad
@@ -2669,7 +2533,6 @@ Share the specified filesystem according to the \fBsharenfs\fR and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs unshare\fR \fB-a\fR | \fIfilesystem\fR|\fImountpoint\fR\fR
 .ad
@@ -2679,7 +2542,6 @@ Unshares currently shared \fBZFS\fR file systems. This is invoked automatically
 as part of the shutdown process.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
@@ -2691,7 +2553,6 @@ the boot process.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfilesystem\fR|\fImountpoint\fR\fR
 .ad
@@ -2705,7 +2566,6 @@ Unshare the specified filesystem. The command can also be given a path to a
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs send\fR [\fB-vR\fR] [\fB-\fR[\fBiI\fR] \fIsnapshot\fR]
 \fIsnapshot\fR\fR
@@ -2718,7 +2578,6 @@ system (for example, using \fBssh\fR(1). By default, a full stream is
 generated.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIsnapshot\fR\fR
 .ad
@@ -2737,7 +2596,6 @@ must be fully specified (for example, \fBpool/fs@origin\fR, not just
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-I\fR \fIsnapshot\fR\fR
 .ad
@@ -2751,7 +2609,6 @@ be specified as with the \fB-i\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR\fR
 .ad
@@ -2771,7 +2628,6 @@ snapshots and file systems that do not exist on the sending side are destroyed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -2786,7 +2642,6 @@ on future versions of \fBZFS\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs receive\fR [\fB-vnFu\fR]
 \fIfilesystem\fR|\fIvolume\fR|\fIsnapshot\fR\fR
@@ -2826,7 +2681,6 @@ determined by appending the sent snapshot's name to the specified
 systems within the specified one are created.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR\fR
 .ad
@@ -2838,7 +2692,6 @@ described in the paragraph above.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR\fR
 .ad
@@ -2849,7 +2702,6 @@ File system that is associated with the received stream is not mounted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -2861,7 +2713,6 @@ receive operation.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -2873,7 +2724,6 @@ Do not actually receive the stream. This can be useful in conjunction with the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-F\fR\fR
 .ad
@@ -2889,7 +2739,6 @@ snapshots and file systems that do not exist on the sending side.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs allow\fR \fIfilesystem\fR | \fIvolume\fR\fR
 .ad
@@ -2901,7 +2750,6 @@ volume. See the other forms of \fBzfs allow\fR for more information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs allow\fR [\fB-ldug\fR] "\fIeveryone\fR"|\fIuser\fR|\fIgroup\fR[,...]
 \fIperm\fR|@\fIsetname\fR[,...] \fIfilesystem\fR| \fIvolume\fR\fR
@@ -2917,7 +2765,6 @@ Delegates \fBZFS\fR administration permission for the file systems to
 non-privileged users.
 .sp
 .ne 2
-.mk
 .na
 \fB[\fB-ug\fR] "\fIeveryone\fR"|\fIuser\fR|\fIgroup\fR[,...]\fR
 .ad
@@ -2933,7 +2780,6 @@ group with the same name as a user, use the \fB-g\fR options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB[\fB-e\fR] \fIperm\fR|@\fIsetname\fR[,...]\fR
 .ad
@@ -2948,7 +2794,6 @@ set names, which begin with an at sign (\fB@\fR) , may be specified. See the
 
 .sp
 .ne 2
-.mk
 .na
 \fB[\fB-ld\fR] \fIfilesystem\fR|\fIvolume\fR\fR
 .ad
@@ -2985,7 +2830,7 @@ receive          subcommand     Must also have the 'mount' and 'create' ability
 rename           subcommand     Must also have the 'mount' and 'create'
                                 ability in the new parent
 rollback         subcommand     Must also have the 'mount' ability
-send             subcommand     
+send             subcommand
 share            subcommand     Allows sharing file systems over NFS or SMB
                                 protocols
 snapshot         subcommand     Must also have the 'mount' ability
@@ -2995,46 +2840,45 @@ userprop         other          Allows changing any user property
 userquota        other          Allows accessing any userquota@... property
 userused         other          Allows reading any userused@... property
 
-aclinherit       property       
-aclmode          property       
-atime            property       
-canmount         property       
-casesensitivity  property       
-checksum         property       
-compression      property       
-copies           property       
-devices          property       
-exec             property       
-mountpoint       property       
-nbmand           property       
-normalization    property       
-primarycache     property       
-quota            property       
-readonly         property       
-recordsize       property       
-refquota         property       
-refreservation   property       
-reservation      property       
-secondarycache   property       
-setuid           property       
-shareiscsi       property       
-sharenfs         property       
-sharesmb         property       
-snapdir          property       
-utf8only         property       
-version          property       
-volblocksize     property       
-volsize          property       
-vscan            property       
-xattr            property       
-zoned            property       
+aclinherit       property
+aclmode          property
+atime            property
+canmount         property
+casesensitivity  property
+checksum         property
+compression      property
+copies           property
+devices          property
+exec             property
+mountpoint       property
+nbmand           property
+normalization    property
+primarycache     property
+quota            property
+readonly         property
+recordsize       property
+refquota         property
+refreservation   property
+reservation      property
+secondarycache   property
+setuid           property
+shareiscsi       property
+sharenfs         property
+sharesmb         property
+snapdir          property
+utf8only         property
+version          property
+volblocksize     property
+volsize          property
+vscan            property
+xattr            property
+zoned            property
 .fi
 .in -2
 .sp
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs allow\fR \fB-c\fR \fIperm\fR|@\fIsetname\fR[,...]
 \fIfilesystem\fR|\fIvolume\fR\fR
@@ -3047,7 +2891,6 @@ creator of any newly-created descendent file system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs allow\fR \fB-s\fR @\fIsetname\fR \fIperm\fR|@\fIsetname\fR[,...]
 \fIfilesystem\fR|\fIvolume\fR\fR
@@ -3064,7 +2907,6 @@ characters long.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs unallow\fR [\fB-rldug\fR]
 "\fIeveryone\fR"|\fIuser\fR|\fIgroup\fR[,...]
@@ -3095,7 +2937,6 @@ not all permissions for every user and group. See the \fBzfs allow\fR command
 for a description of the \fB-ldugec\fR options.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -3108,7 +2949,6 @@ Recursively remove the permissions from this file system and all descendents.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs unallow\fR [\fB-r\fR] \fB-s\fR @\fIsetname\fR
 [\fIperm\fR|@\fIsetname\fR[,...]]\fR
@@ -3125,7 +2965,6 @@ then all permissions are removed, thus removing the set entirely.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs hold\fR [\fB-r\fR] \fItag\fR \fIsnapshot\fR...\fR
 .ad
@@ -3139,7 +2978,6 @@ If a hold exists on a snapshot, attempts to destroy that snapshot by using the
 \fBzfs destroy\fR command return \fBEBUSY\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -3153,7 +2991,6 @@ snapshots of all descendent file systems.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs holds\fR [\fB-r\fR] \fIsnapshot\fR...\fR
 .ad
@@ -3162,7 +2999,6 @@ snapshots of all descendent file systems.
 Lists all existing user references for the given snapshot or snapshots.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -3176,7 +3012,6 @@ listing the holds on the named snapshot.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzfs release\fR [\fB-r\fR] \fItag\fR \fIsnapshot\fR...\fR
 .ad
@@ -3189,7 +3024,6 @@ If a hold exists on a snapshot, attempts to destroy that snapshot by using the
 \fBzfs destroy\fR command return \fBEBUSY\fR.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-r\fR\fR
 .ad
@@ -3534,7 +3368,7 @@ target.
 # \fBzfs set shareiscsi=on pool/volumes/vol1\fR
 # \fBiscsitadm list target\fR
 Target: pool/volumes/vol1
- iSCSI Name: 
+ iSCSI Name:
  iqn.1986-03.com.sun:02:7b4b02a6-3277-eb1b-e686-a24762c52a8c
  Connections: 0
 .fi
@@ -3646,7 +3480,7 @@ Create time permissions on (tank/users)
           create,destroy
 Local+Descendent permissions on (tank/users)
           group staff create,mount
-------------------------------------------------------------- 
+-------------------------------------------------------------
 .fi
 .in -2
 .sp
@@ -3697,7 +3531,7 @@ Local+Descendent permissions on (users/home)
 cindys% \fBzfs set quota=10G users/home/marks\fR
 cindys% \fBzfs get quota users/home/marks\fR
 NAME              PROPERTY  VALUE             SOURCE
-users/home/marks  quota     10G               local 
+users/home/marks  quota     10G               local
 .fi
 .in -2
 .sp
@@ -3722,7 +3556,7 @@ Create time permissions on (tank/users)
         create,destroy
 Local+Descendent permissions on (tank/users)
         group staff @pset,create,mount
-------------------------------------------------------------- 
+-------------------------------------------------------------
 .fi
 .in -2
 .sp
@@ -3733,7 +3567,6 @@ Local+Descendent permissions on (tank/users)
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -3744,7 +3577,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
@@ -3755,7 +3587,6 @@ An error occurred.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
@@ -3772,13 +3603,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/zic.1m b/usr/src/man/man1m/zic.1m
index 75ea74dbc6..f4d60990c2 100644
--- a/usr/src/man/man1m/zic.1m
+++ b/usr/src/man/man1m/zic.1m
@@ -4,13 +4,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH zic 1M "3 Jan 2006" "SunOS 5.11" "System Administration Commands"
+.TH ZIC 1M "Jan 3, 2006"
 .SH NAME
 zic \- time zone compiler
 .SH SYNOPSIS
 .LP
 .nf
-\fBzic\fR [\fB--\fR\fIversion\fR] [\fB-s\fR] [\fB-v\fR] [\fB-l\fR \fIlocaltime\fR] [\fB-p\fR \fIposixrules\fR] 
+\fBzic\fR [\fB--\fR\fIversion\fR] [\fB-s\fR] [\fB-v\fR] [\fB-l\fR \fIlocaltime\fR] [\fB-p\fR \fIposixrules\fR]
      [\fB-d\fR \fIdirectory\fR] [\fB-y\fR \fIyearistype\fR] [\fIfilename\fR]...
 .fi
 
@@ -57,23 +57,19 @@ Rule   USA   1969  1973   -  Apr lastSun 2:00  1:00   D
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNAME\fR\fR
 .ad
 .RS 12n
-.rt  
 Gives the (arbitrary) name of the set of rules this rule is part of.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFROM\fR\fR
 .ad
 .RS 12n
-.rt  
 Gives the first year in which the rule applies. The word \fBminimum\fR (or an
 abbreviation) means the minimum year with a representable time value. The word
 \fBmaximum\fR (or an abbreviation) means the maximum year with a representable
@@ -82,12 +78,10 @@ time value.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTO\fR\fR
 .ad
 .RS 12n
-.rt  
 Gives the final year in which the rule applies. In addition to \fBminimum\fR
 and \fBmaximum\fR (as above), the word \fBonly\fR (or an abbreviation) can be
 used to repeat the value of the \fBFROM\fR field.
@@ -95,65 +89,53 @@ used to repeat the value of the \fBFROM\fR field.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBTYPE\fR\fR
 .ad
 .RS 12n
-.rt  
 Gives the type of year in which the rule applies. If \fBTYPE\fR is:
 .sp
 .ne 2
-.mk
 .na
 \fB\&'\fB\(mi\fR\&'\fR
 .ad
 .RS 14n
-.rt  
 The rule applies in all years between \fBFROM\fR and \fBTO\fR, inclusive.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBuspres\fR\fR
 .ad
 .RS 14n
-.rt  
 The rule applies in U.S. Presidential election years.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnonpres\fR\fR
 .ad
 .RS 14n
-.rt  
 The rule applies in years other than U.S. Presidential election years.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBeven\fR\fR
 .ad
 .RS 14n
-.rt  
 The rule applies to even-numbered years.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBodd\fR\fR
 .ad
 .RS 14n
-.rt  
 The rule applies to odd-numbered years.
 .RE
 
@@ -175,76 +157,62 @@ Solaris environment.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBIN\fR\fR
 .ad
 .RS 12n
-.rt  
 Names the month in which the rule takes effect. Month names can be abbreviated.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBON\fR\fR
 .ad
 .RS 12n
-.rt  
 Gives the day on which the rule takes effect. Recognized forms include:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB5\fR\fR
 .ad
 .RS 11n
-.rt  
 the fifth day of the month
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlastSun\fR\fR
 .ad
 .RS 11n
-.rt  
 The last Sunday in the month
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlastMon\fR\fR
 .ad
 .RS 11n
-.rt  
 The last Monday in the month
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSun>=8\fR\fR
 .ad
 .RS 11n
-.rt  
 First Sunday on or after the eighth
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSun<=25\fR\fR
 .ad
 .RS 11n
-.rt  
 Last Sunday on or before the 25th
 .RE
 
@@ -254,54 +222,44 @@ There cannot be spaces within the \fBON\fR field.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBAT\fR\fR
 .ad
 .RS 12n
-.rt  
 Gives the time of day at which the rule takes effect. Recognized forms include:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 11n
-.rt  
 Time in hours
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2:00\fR\fR
 .ad
 .RS 11n
-.rt  
 Time in hours and minutes
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB15:00\fR\fR
 .ad
 .RS 11n
-.rt  
 24-hour format time (for times after noon)
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1:28:14\fR\fR
 .ad
 .RS 11n
-.rt  
 Time in hours, minutes, and seconds, where hour 0 is midnight at the start of
 the day and hour 24 is midnight at the end of the day.
 .RE
@@ -314,12 +272,10 @@ absence of an indicator, wall clock time is assumed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBSAVE\fR\fR
 .ad
 .RS 12n
-.rt  
 Gives the amount of time to be added to local standard time when the rule is in
 effect. This field has the same format as the \fBAT\fR field (without the
 \fBw\fR and \fBs\fR suffixes).
@@ -327,12 +283,10 @@ effect. This field has the same format as the \fBAT\fR field (without the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBLETTER/S\fR\fR
 .ad
 .RS 12n
-.rt  
 Gives the "variable part" (for example, the "S" or "D" in "EST" or "EDT" of
 time zone abbreviations to be used when this rule is in effect. If this field
 is '\fB\(mi\fR\&', the variable part is null.
@@ -357,7 +311,7 @@ For example:
 .in +2
 .nf
 Zone Australia/SouthWest   9:30        -         CST    1992 Mar 15 12:00
-                           8:30      Aus         CST                  
+                           8:30      Aus         CST
 .fi
 .in -2
 .sp
@@ -367,24 +321,20 @@ Zone Australia/SouthWest   9:30        -         CST    1992 Mar 15 12:00
 The fields that make up a zone line are:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBNAME\fR\fR
 .ad
 .RS 14n
-.rt  
 The name of the time zone. This is the name used in creating the time
 conversion information file for the zone.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBGMTOFF\fR\fR
 .ad
 .RS 14n
-.rt  
 The amount of time to add to \fBUTC\fR to get standard time in this zone. This
 field has the same format as the \fBAT\fR and \fBSAVE\fR fields of rule lines;
 begin the field with a minus sign to subtract time from \fBUTC\fR.
@@ -392,12 +342,10 @@ begin the field with a minus sign to subtract time from \fBUTC\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBRULES/SAVE\fR\fR
 .ad
 .RS 14n
-.rt  
 The name of the rule(s) that apply in the time zone or, alternately, an amount
 of time to add to local standard time. If this field is `\fB\(mi\fR\&', then
 standard time always applies in the time zone.
@@ -405,12 +353,10 @@ standard time always applies in the time zone.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFORMAT\fR\fR
 .ad
 .RS 14n
-.rt  
 The format for time zone abbreviations in this time zone. The pair of
 characters \fB%s\fR is used to show where the "variable part" of the time zone
 abbreviation goes. Alternately, a slash (/) separates standard and daylight
@@ -419,12 +365,10 @@ abbreviations.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBUNTIL\fR\fR
 .ad
 .RS 14n
-.rt  
 The time at which the \fBUTC\fR offset or the rule(s) change for a location. It
 is specified as a year, a month, a day, and a time of day. The time of day has
 the same format as the \fBAT\fR field of rule lines. If this is specified, the
@@ -476,35 +420,29 @@ Except for continuation lines, lines can appear in any order in the input.
 .SH OPTIONS
 .sp
 .ne 2
-.mk
 .na
 \fB\fB--\fR\fIversion\fR\fR
 .ad
 .RS 17n
-.rt  
 Outputs version information and exits.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdirectory\fR\fR
 .ad
 .RS 17n
-.rt  
 Creates time conversion information files in the directory \fIdirectory\fR
 rather than in the standard directory \fB/usr/share/lib/zoneinfo\fR.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR \fIlocaltime\fR\fR
 .ad
 .RS 17n
-.rt  
 Uses the given time zone as local time \fIlocaltime\fR. \fBzic\fR acts as if
 the file contained a link line of the form:
 .sp
@@ -519,12 +457,10 @@ Link \fIlocaltime\fR localtime
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR \fIposixrules\fR\fR
 .ad
 .RS 17n
-.rt  
 Uses the rules of the given time zone \fIposixrules\fR when handling
 POSIX-format time zone environment variables. \fBzic\fR acts as if the input
 contained a link line of the form:
@@ -542,12 +478,10 @@ environment.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 17n
-.rt  
 Limits time values stored in output files to values that are the same whether
 they are taken to be signed or unsigned. You can use this option to generate
 SVVS-compatible files.
@@ -557,12 +491,10 @@ This option is obsolete and may be removed in a future release.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 17n
-.rt  
 Complains if a year that appears in a data file is outside the range of years
 representable by system time values (\fB0:00:00 a.m.\fR \fBUTC,\fR \fBJanuary
 1\fR, \fB1970\fR, to \fB3:14:07 a.m.\fR \fBUTC,\fR \fBJanuary 19\fR,
@@ -572,12 +504,10 @@ handled by pre-1998  versions  of \fBzic\fR)  appears in  the input.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-y\fR \fIyearistype\fR\fR
 .ad
 .RS 17n
-.rt  
 Uses the given command \fIyearistype\fR rather than \fByearistype\fR when
 checking year types (see \fBRules\fR under \fBDESCRIPTION\fR).
 .RE
@@ -585,12 +515,10 @@ checking year types (see \fBRules\fR under \fBDESCRIPTION\fR).
 .SH OPERANDS
 .sp
 .ne 2
-.mk
 .na
 \fB\fIfilename\fR\fR
 .ad
 .RS 12n
-.rt  
 A file containing input lines that specify the time conversion information
 files to be created. If a \fIfilename\fR is '\fB\(mi\fR\&', the standard input
 is read.
@@ -599,7 +527,6 @@ is read.
 .SH FILES
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/share/lib/zoneinfo\fR\fR
 .ad
@@ -610,7 +537,6 @@ Standard directory used for created files
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB/usr/share/lib/zoneinfo/src\fR\fR
 .ad
@@ -627,13 +553,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted*
+Interface Stability	Committed*
 .TE
 
 .sp
diff --git a/usr/src/man/man1m/zoneadm.1m b/usr/src/man/man1m/zoneadm.1m
index 16bc48d9a5..13612b3ed1 100644
--- a/usr/src/man/man1m/zoneadm.1m
+++ b/usr/src/man/man1m/zoneadm.1m
@@ -3,19 +3,19 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH zoneadm 1M "13 Feb 2009" "SunOS 5.11" "System Administration Commands"
+.TH ZONEADM 1M "Feb 13, 2009"
 .SH NAME
 zoneadm \- administer zones
 .SH SYNOPSIS
 .LP
 .nf
-\fBzoneadm\fR \fB-z\fR \fIzonename\fR [\fB-u\fR \fIuuid-match\fR] \fIsubcommand\fR 
+\fBzoneadm\fR \fB-z\fR \fIzonename\fR [\fB-u\fR \fIuuid-match\fR] \fIsubcommand\fR
      [\fIsubcommand_options\fR]
 .fi
 
 .LP
 .nf
-\fBzoneadm\fR [\fB-R\fR \fIroot\fR] [\fB-z\fR \fIzonename\fR] [\fB-u\fR \fIuuid-match\fR] list 
+\fBzoneadm\fR [\fB-R\fR \fIroot\fR] [\fB-z\fR \fIzonename\fR] [\fB-u\fR \fIuuid-match\fR] list
      [\fIlist_options\fR]
 .fi
 
@@ -40,7 +40,6 @@ or any of its children cannot change zones.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot\fR\fR
 .ad
@@ -52,7 +51,6 @@ conjunction with the "\fBlist\fR" and "\fBmark\fR" subcommands.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-u\fR \fIuuid-match\fR\fR
 .ad
@@ -66,7 +64,6 @@ option, if such a zone is present.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-z\fR \fIzonename\fR\fR
 .ad
@@ -90,7 +87,6 @@ uninstall to reset such a zone back to the configured state.
 The following subcommands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBattach\fR [\fB-F\fR] [\fB-n\fR \fIpath\fR] [\fIbrand-specific
 options\fR]\fR
@@ -134,7 +130,6 @@ Use the following command to attach a zone:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBboot\fR [\fB--\fR \fIboot_options\fR]\fR
 .ad
@@ -145,7 +140,6 @@ Boot (or activate) the specified zones.
 The following \fIboot_options\fR are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR \fIaltinit\fR\fR
 .ad
@@ -158,7 +152,6 @@ a valid path to an executable. The default primordial process is
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fIsmf_options\fR\fR
 .ad
@@ -175,7 +168,6 @@ boot the system. See \fBkernel\fR(1M) for a listing of the \fB-m\fR suboptions.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
@@ -190,7 +182,6 @@ milestone is equivalent to init level \fBs\fR. See \fBsvc.startd\fR(1M) and
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBclone\fR [\fB-m\fR \fIcopy\fR] [\fB-s\fR \fIzfs_snapshot\fR]
 \fIsource_zone\fR\fR
@@ -201,7 +192,6 @@ Install a zone by copying an existing installed zone. This subcommand is an
 alternative way to install the zone.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fIcopy\fR\fR
 .ad
@@ -212,7 +202,6 @@ Force the clone to be a copy, even if a "\fBZFS\fR clone" is possible.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR \fIzfs_snapshot\fR\fR
 .ad
@@ -228,7 +217,6 @@ The source zone must be halted before this subcommand can be used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdetach\fR [\fB-n\fR]\fR
 .ad
@@ -252,7 +240,7 @@ Use the following command to detach a zone:
 .sp
 .in +2
 .nf
-# zoneadm -z my-zone detach 
+# zoneadm -z my-zone detach
 .fi
 .in -2
 .sp
@@ -262,7 +250,6 @@ The source zone must be halted before this subcommand can be used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhalt\fR\fR
 .ad
@@ -285,7 +272,6 @@ to cleanly shutdown the zone by running the shutdown scripts.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhelp\fR [\fIsubcommand\fR]\fR
 .ad
@@ -297,7 +283,6 @@ Display general help. If you specify \fIsubcommand\fR, displays help on
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinstall\fR [\fB-x\fR \fInodataset\fR] [\fIbrand-specific options\fR]\fR
 .ad
@@ -308,7 +293,6 @@ attempts to verify first. It refuses to install if the verify step fails. See
 the \fBverify\fR subcommand.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR \fInodataset\fR\fR
 .ad
@@ -324,7 +308,6 @@ information.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlist\fR [\fIlist_options\fR]\fR
 .ad
@@ -343,7 +326,6 @@ listed.
 The following \fIlist_options\fR are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR\fR
 .ad
@@ -354,7 +336,6 @@ Display all configured zones. This option overides the \fB-i\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
@@ -365,7 +346,6 @@ Expand the display to all installed zones.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-p\fR\fR
 .ad
@@ -395,7 +375,6 @@ nor \fB-p\fR is used, just the zone name is listed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -412,7 +391,6 @@ nor \fB-p\fR is used, just the zone name is listed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmark incomplete\fR\fR
 .ad
@@ -426,7 +404,6 @@ the zone).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmove\fR \fInew_zonepath\fR\fR
 .ad
@@ -439,7 +416,6 @@ and normal restrictions for \fIzonepath\fR apply.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBready\fR\fR
 .ad
@@ -451,7 +427,6 @@ in the zone.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBreboot\fR\fR
 .ad
@@ -463,7 +438,6 @@ subcommand fails if the specified zones are not active.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBuninstall [\fR\fB-F\fR\fB]\fR\fR
 .ad
@@ -476,7 +450,6 @@ You can use the \fB-F\fR flag to force the action.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBverify\fR\fR
 .ad
@@ -487,7 +460,6 @@ installed on the machine. Following is a break-down of the checks by
 \fBresource/property\fR type:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzonepath\fR\fR
 .ad
@@ -509,7 +481,6 @@ wrong.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfs\fR\fR
 .ad
@@ -530,7 +501,6 @@ there is no \fBfsck\fR binary for a given filesystem type at
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnet\fR\fR
 .ad
@@ -568,7 +538,6 @@ cannot be set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrctl\fR\fR
 .ad
@@ -631,7 +600,6 @@ The following command illustrates the use of the \fB-s\fR option.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -642,7 +610,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
@@ -653,7 +620,6 @@ An error occurred.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
@@ -670,13 +636,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityCommitted
+Interface Stability	Committed
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/zoneadmd.1m b/usr/src/man/man1m/zoneadmd.1m
index e80a8c336a..f07c9dd5f1 100644
--- a/usr/src/man/man1m/zoneadmd.1m
+++ b/usr/src/man/man1m/zoneadmd.1m
@@ -4,13 +4,13 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH zoneadmd 1M "1 Nov 2004" "SunOS 5.11" "System Administration Commands"
+.TH ZONEADMD 1M "Nov 1, 2004"
 .SH NAME
 zoneadmd \- zone administration daemon
 .SH SYNOPSIS
 .LP
 .nf
-\fB/usr/lib/zones/zoneadmd\fR 
+\fB/usr/lib/zones/zoneadmd\fR
 .fi
 
 .SH DESCRIPTION
@@ -34,13 +34,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityPrivate
+Interface Stability	Private
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/zonecfg.1m b/usr/src/man/man1m/zonecfg.1m
index b0d2e1d345..d6e7ef3acc 100644
--- a/usr/src/man/man1m/zonecfg.1m
+++ b/usr/src/man/man1m/zonecfg.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH zonecfg 1M "29 Jul 2009" "SunOS 5.11" "System Administration Commands"
+.TH ZONECFG 1M "Jul 29, 2009"
 .SH NAME
 zonecfg \- set up zone configuration
 .SH SYNOPSIS
@@ -76,7 +76,6 @@ man page.
 The following resource types are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBattr\fR\fR
 .ad
@@ -87,7 +86,6 @@ Generic attribute.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcapped-cpu\fR\fR
 .ad
@@ -98,7 +96,6 @@ Limits for CPU usage.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcapped-memory\fR\fR
 .ad
@@ -109,7 +106,6 @@ Limits for physical, swap, and locked memory.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdataset\fR\fR
 .ad
@@ -120,7 +116,6 @@ Limits for physical, swap, and locked memory.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdedicated-cpu\fR\fR
 .ad
@@ -131,7 +126,6 @@ Subset of the system's processors dedicated to this zone while it is running.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdevice\fR\fR
 .ad
@@ -142,7 +136,6 @@ Device.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfs\fR\fR
 .ad
@@ -153,7 +146,6 @@ file-system
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinherit-pkg-dir\fR\fR
 .ad
@@ -169,7 +161,6 @@ modifiable or removable once a zone has been installed with \fBzoneadm\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnet\fR\fR
 .ad
@@ -180,7 +171,6 @@ Network interface.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrctl\fR\fR
 .ad
@@ -329,7 +319,6 @@ some particular resource.
 The following properties are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB(global)\fR
 .ad
@@ -340,7 +329,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB(global)\fR
 .ad
@@ -351,7 +339,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB(global)\fR
 .ad
@@ -362,7 +349,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB(global)\fR
 .ad
@@ -373,7 +359,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB(global)\fR
 .ad
@@ -384,7 +369,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB(global)\fR
 .ad
@@ -395,7 +379,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB(global)\fR
 .ad
@@ -406,7 +389,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB(global)\fR
 .ad
@@ -417,7 +399,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB(global)\fR
 .ad
@@ -428,7 +409,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB(global)\fR
 .ad
@@ -439,7 +419,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB(global)\fR
 .ad
@@ -450,7 +429,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB(global)\fR
 .ad
@@ -461,7 +439,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB(global)\fR
 .ad
@@ -472,7 +449,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB(global)\fR
 .ad
@@ -483,7 +459,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB(global)\fR
 .ad
@@ -494,7 +469,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfs\fR\fR
 .ad
@@ -505,7 +479,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinherit-pkg-dir\fR\fR
 .ad
@@ -516,7 +489,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnet\fR\fR
 .ad
@@ -527,7 +499,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdevice\fR\fR
 .ad
@@ -538,7 +509,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrctl\fR\fR
 .ad
@@ -549,7 +519,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBattr\fR\fR
 .ad
@@ -560,7 +529,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdataset\fR\fR
 .ad
@@ -571,7 +539,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdedicated-cpu\fR\fR
 .ad
@@ -582,7 +549,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcapped-memory\fR\fR
 .ad
@@ -593,7 +559,6 @@ The following properties are supported:
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcapped-cpu\fR\fR
 .ad
@@ -643,7 +608,6 @@ specified in \fBfnmatch\fR(5). See \fBEXAMPLES\fR.
 The property types are described as follows:
 .sp
 .ne 2
-.mk
 .na
 \fBglobal: \fBzonename\fR\fR
 .ad
@@ -654,7 +618,6 @@ The name of the zone.
 
 .sp
 .ne 2
-.mk
 .na
 \fBglobal: \fBzonepath\fR\fR
 .ad
@@ -665,7 +628,6 @@ Path to zone's file system.
 
 .sp
 .ne 2
-.mk
 .na
 \fBglobal: \fBautoboot\fR\fR
 .ad
@@ -689,7 +651,6 @@ Replace \fBenable\fR with \fBdisable\fR to disable the zones service. See
 
 .sp
 .ne 2
-.mk
 .na
 \fBglobal: \fBbootargs\fR\fR
 .ad
@@ -702,7 +663,6 @@ precedence. The valid arguments are described in \fBzoneadm\fR(1M).
 
 .sp
 .ne 2
-.mk
 .na
 \fBglobal: \fBpool\fR\fR
 .ad
@@ -714,7 +674,6 @@ property is incompatible with the \fBdedicated-cpu\fR resource.
 
 .sp
 .ne 2
-.mk
 .na
 \fBglobal: \fBlimitpriv\fR\fR
 .ad
@@ -749,7 +708,6 @@ would specify it in this property, is listed in \fBprivileges\fR(5) as
 
 .sp
 .ne 2
-.mk
 .na
 \fBglobal: \fBbrand\fR\fR
 .ad
@@ -760,7 +718,6 @@ The zone's brand type.
 
 .sp
 .ne 2
-.mk
 .na
 \fBglobal: \fBip-type\fR\fR
 .ad
@@ -774,7 +731,6 @@ This property takes the values \fBshared\fR and \fBexclusive\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fBglobal: \fBhostid\fR\fR
 .ad
@@ -789,7 +745,6 @@ uppercase and lowercase hexadecimal digits are acceptable.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfs\fR: dir, special, raw, type, options\fR
 .ad
@@ -801,7 +756,6 @@ Values needed to determine how, where, and so forth to mount file systems. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinherit-pkg-dir\fR: dir\fR
 .ad
@@ -812,7 +766,6 @@ The directory path.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnet\fR: address, physical, defrouter\fR
 .ad
@@ -859,7 +812,6 @@ default router properties cannot be set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdevice\fR: match\fR
 .ad
@@ -870,7 +822,6 @@ Device name to match.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrctl\fR: name, value\fR
 .ad
@@ -883,7 +834,6 @@ is to use the global property name associated with a specific rctl.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBattr\fR: name, type, value\fR
 .ad
@@ -896,7 +846,6 @@ that type. \fBuint\fR means unsigned , that is, a non-negative integer.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdataset\fR: name\fR
 .ad
@@ -908,7 +857,6 @@ The name of a \fBZFS\fR dataset to be accessed from within the zone. See
 
 .sp
 .ne 2
-.mk
 .na
 \fBglobal: \fBcpu-shares\fR\fR
 .ad
@@ -921,7 +869,6 @@ is the preferred way to set the \fBzone.cpu-shares\fR rctl.
 
 .sp
 .ne 2
-.mk
 .na
 \fBglobal: \fBmax-lwps\fR\fR
 .ad
@@ -933,7 +880,6 @@ is the preferred way to set the \fBzone.max-lwps\fR rctl.
 
 .sp
 .ne 2
-.mk
 .na
 \fBglobal: \fBmax-msg-ids\fR\fR
 .ad
@@ -945,7 +891,6 @@ the preferred way to set the \fBzone.max-msg-ids\fR rctl.
 
 .sp
 .ne 2
-.mk
 .na
 \fBglobal: \fBmax-sem-ids\fR\fR
 .ad
@@ -957,7 +902,6 @@ preferred way to set the \fBzone.max-sem-ids\fR rctl.
 
 .sp
 .ne 2
-.mk
 .na
 \fBglobal: \fBmax-shm-ids\fR\fR
 .ad
@@ -969,7 +913,6 @@ the preferred way to set the \fBzone.max-shm-ids\fR rctl.
 
 .sp
 .ne 2
-.mk
 .na
 \fBglobal: \fBmax-shm-memory\fR\fR
 .ad
@@ -982,7 +925,6 @@ can be applied to the value for this number (for example, 1M is one megabyte).
 
 .sp
 .ne 2
-.mk
 .na
 \fBglobal: \fBscheduling-class\fR\fR
 .ad
@@ -1015,7 +957,6 @@ Under any other conditions, the system default scheduling class is used.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdedicated-cpu\fR: ncpus, importance\fR
 .ad
@@ -1036,7 +977,6 @@ single instance of this resource can be added to the zone.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcapped-memory\fR: physical, swap, locked\fR
 .ad
@@ -1055,7 +995,6 @@ rctl. The \fBlocked\fR property is the preferred way to set the
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcapped-cpu\fR: ncpus\fR
 .ad
@@ -1160,7 +1099,6 @@ that zone and for projects in that zone. See \fBEXAMPLES\fR.
 The following are cap-related arguments for use with \fBkstat\fR(1M):
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcaps\fR\fR
 .ad
@@ -1171,7 +1109,6 @@ The \fBkstat\fR module.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBproject_caps\fR or \fBzone_caps\fR\fR
 .ad
@@ -1182,7 +1119,6 @@ The \fBkstat\fR module.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcpucaps_project_\fR\fIid\fR or \fBcpucaps_zone_\fR\fIid\fR\fR
 .ad
@@ -1198,7 +1134,6 @@ The following fields are displayed in response to a \fBkstat\fR(1M) command
 requesting statistics for all CPU caps.
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmodule\fR\fR
 .ad
@@ -1209,7 +1144,6 @@ In this usage of \fBkstat\fR, this field will have the value \fBcaps\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBname\fR\fR
 .ad
@@ -1221,7 +1155,6 @@ As described above, \fBcpucaps_project_\fR\fIid\fR or
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBabove_sec\fR\fR
 .ad
@@ -1232,7 +1165,6 @@ Total time, in seconds, spent above the cap.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbelow_sec\fR\fR
 .ad
@@ -1243,7 +1175,6 @@ Total time, in seconds, spent below the cap.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmaxusage\fR\fR
 .ad
@@ -1254,7 +1185,6 @@ Maximum observed CPU usage.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBnwait\fR\fR
 .ad
@@ -1265,7 +1195,6 @@ Number of threads on cap wait queue.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBusage\fR\fR
 .ad
@@ -1277,7 +1206,6 @@ zone, in terms of a percentage of a single CPU.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBvalue\fR\fR
 .ad
@@ -1288,7 +1216,6 @@ The cap value, in terms of a percentage of a single CPU.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzonename\fR\fR
 .ad
@@ -1306,7 +1233,6 @@ See \fBEXAMPLES\fR for sample output from a \fBkstat\fR command.
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR \fIcommand_file\fR\fR
 .ad
@@ -1318,7 +1244,6 @@ file of \fBzonecfg\fR subcommands, one per line.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-z\fR \fIzonename\fR\fR
 .ad
@@ -1363,7 +1288,6 @@ error.
 The following subcommands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBadd\fR \fIresource-type\fR (global scope)\fR
 .ad
@@ -1384,7 +1308,6 @@ brackets, separated by commas (\fB[foo,bar,baz]\fR). See \fBPROPERTIES\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcancel\fR\fR
 .ad
@@ -1397,7 +1320,6 @@ scope.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBclear\fR \fIproperty-name\fR\fR
 .ad
@@ -1408,7 +1330,6 @@ Clear the value for the property.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcommit\fR\fR
 .ad
@@ -1424,7 +1345,6 @@ correct to be committed, this operation automatically does a verify.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcreate [\fR\fB-F\fR\fB] [\fR \fB-a\fR \fIpath\fR |\fB-b\fR \fB|\fR
 \fB-t\fR \fItemplate\fR\fB]\fR\fR
@@ -1453,7 +1373,6 @@ Use the \fB-b\fR option to create a blank configuration. Without arguments,
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelete [\fR\fB-F\fR\fB]\fR\fR
 .ad
@@ -1468,7 +1387,6 @@ Specify the \fB-F\fR option to force the action.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBend\fR\fR
 .ad
@@ -1484,7 +1402,6 @@ message.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBexport [\fR\fB-f\fR \fIoutput-file\fR\fB]\fR\fR
 .ad
@@ -1497,7 +1414,6 @@ suitable for use in a command file.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhelp [usage] [\fIsubcommand\fR] [syntax] [\fR\fIcommand-name\fR\fB]\fR\fR
 .ad
@@ -1508,7 +1424,6 @@ Print general help or help about given topic.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBinfo zonename | zonepath | autoboot | brand | pool | limitpriv\fR\fR
 .ad
@@ -1529,7 +1444,6 @@ which is currently being added or modified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBremove\fR \fIresource-type\fR\fB{\fR\fIproperty-name\fR\fB=\fR\fIproperty
 -value\fR\fB}\fR(global scope)\fR
@@ -1547,7 +1461,6 @@ option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBselect\fR \fIresource-type\fR
 \fB{\fR\fIproperty-name\fR\fB=\fR\fIproperty-value\fR\fB}\fR\fR
@@ -1564,7 +1477,6 @@ for the resource to be uniquely identified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBset\fR \fIproperty-name\fR\fB=\fR\fIproperty\fR\fB-\fR\fIvalue\fR\fR
 .ad
@@ -1578,7 +1490,6 @@ resource scopes.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBverify\fR\fR
 .ad
@@ -1601,7 +1512,6 @@ A \fBzonepath\fR is specified.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBrevert\fR \fB[\fR\fB-F\fR\fB]\fR\fR
 .ad
@@ -1613,7 +1523,6 @@ can be used to force the action.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBexit [\fR\fB-F\fR\fB]\fR\fR
 .ad
@@ -1898,7 +1807,7 @@ The following command displays information about all CPU caps.
 .in +2
 .nf
 # \fBkstat -n /cpucaps/\fR
-module: caps                            instance: 0     
+module: caps                            instance: 0
 name:   cpucaps_project_0               class:    project_caps
         above_sec                       0
         below_sec                       2157
@@ -1910,7 +1819,7 @@ name:   cpucaps_project_0               class:    project_caps
         value                           18446743151372347932
         zonename                        global
 
-module: caps                            instance: 0     
+module: caps                            instance: 0
 name:   cpucaps_project_1               class:    project_caps
         above_sec                       0
         below_sec                       0
@@ -1922,7 +1831,7 @@ name:   cpucaps_project_1               class:    project_caps
         value                           18446743151372347932
         zonename                        global
 
-module: caps                            instance: 0     
+module: caps                            instance: 0
 name:   cpucaps_project_201             class:    project_caps
         above_sec                       0
         below_sec                       235105
@@ -1934,7 +1843,7 @@ name:   cpucaps_project_201             class:    project_caps
         value                           100
         zonename                        global
 
-module: caps                            instance: 0     
+module: caps                            instance: 0
 name:   cpucaps_project_202             class:    project_caps
         above_sec                       0
         below_sec                       235094
@@ -1946,7 +1855,7 @@ name:   cpucaps_project_202             class:    project_caps
         value                           100
         zonename                        global
 
-module: caps                            instance: 0     
+module: caps                            instance: 0
 name:   cpucaps_project_203             class:    project_caps
         above_sec                       0
         below_sec                       235034
@@ -1958,7 +1867,7 @@ name:   cpucaps_project_203             class:    project_caps
         value                           100
         zonename                        global
 
-module: caps                            instance: 0     
+module: caps                            instance: 0
 name:   cpucaps_project_86710           class:    project_caps
         above_sec                       22
         below_sec                       235166
@@ -1970,7 +1879,7 @@ name:   cpucaps_project_86710           class:    project_caps
         value                           100
         zonename                        global
 
-module: caps                            instance: 0     
+module: caps                            instance: 0
 name:   cpucaps_zone_0                  class:    zone_caps
         above_sec                       100733
         below_sec                       134332
@@ -1982,7 +1891,7 @@ name:   cpucaps_zone_0                  class:    zone_caps
         value                           200
         zonename                        global
 
-module: caps                            instance: 1     
+module: caps                            instance: 1
 name:   cpucaps_project_0               class:    project_caps
         above_sec                       0
         below_sec                       0
@@ -1994,7 +1903,7 @@ name:   cpucaps_project_0               class:    project_caps
         value                           18446743151372347932
         zonename                        test_001
 
-module: caps                            instance: 1     
+module: caps                            instance: 1
 name:   cpucaps_zone_1                  class:    zone_caps
         above_sec                       2
         below_sec                       10524
@@ -2033,7 +1942,6 @@ for a specific project, the second for the same project within zone 1.
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
@@ -2044,7 +1952,6 @@ Successful completion.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
@@ -2055,7 +1962,6 @@ An error occurred.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
@@ -2072,13 +1978,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityVolatile
+Interface Stability	Volatile
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/zpool.1m b/usr/src/man/man1m/zpool.1m
index 7a67781be2..4fb81d82d3 100644
--- a/usr/src/man/man1m/zpool.1m
+++ b/usr/src/man/man1m/zpool.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH zpool 1M "21 Sep 2009" "SunOS 5.11" "System Administration Commands"
+.TH ZPOOL 1M "Sep 21, 2009"
 .SH NAME
 zpool \- configures ZFS storage pools
 .SH SYNOPSIS
@@ -29,7 +29,7 @@ zpool \- configures ZFS storage pools
 
 .LP
 .nf
-\fBzpool create\fR [\fB-fn\fR] [\fB-o\fR \fIproperty=value\fR] ... [\fB-O\fR \fIfile-system-property=value\fR] 
+\fBzpool create\fR [\fB-fn\fR] [\fB-o\fR \fIproperty=value\fR] ... [\fB-O\fR \fIfile-system-property=value\fR]
      ... [\fB-m\fR \fImountpoint\fR] [\fB-R\fR \fIroot\fR] \fIpool\fR \fIvdev\fR ...
 .fi
 
@@ -65,7 +65,7 @@ zpool \- configures ZFS storage pools
 
 .LP
 .nf
-\fBzpool import\fR [\fB-o \fImntopts\fR\fR] [\fB-o\fR \fIproperty=value\fR] ... [\fB-d\fR \fIdir\fR | \fB-c\fR \fIcachefile\fR] 
+\fBzpool import\fR [\fB-o \fImntopts\fR\fR] [\fB-o\fR \fIproperty=value\fR] ... [\fB-d\fR \fIdir\fR | \fB-c\fR \fIcachefile\fR]
      [\fB-D\fR] [\fB-f\fR] [\fB-R\fR \fIroot\fR] \fB-a\fR
 .fi
 
@@ -122,7 +122,7 @@ zpool \- configures ZFS storage pools
 
 .LP
 .nf
-\fBzpool upgrade\fR 
+\fBzpool upgrade\fR
 .fi
 
 .LP
@@ -153,12 +153,10 @@ organized according to certain performance and fault characteristics. The
 following virtual devices are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdisk\fR\fR
 .ad
 .RS 10n
-.rt  
 A block device, typically located under \fB/dev/dsk\fR. \fBZFS\fR can use
 individual slices or partitions, though the recommended mode of operation is to
 use whole disks. A disk can be specified by a full path, or it can be a
@@ -170,12 +168,10 @@ disk, \fBZFS\fR automatically labels the disk, if necessary.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfile\fR\fR
 .ad
 .RS 10n
-.rt  
 A regular file. The use of files as a backing store is strongly discouraged. It
 is designed primarily for experimental purposes, as the fault tolerance of a
 file is only as good as the file system of which it is a part. A file must be
@@ -184,12 +180,10 @@ specified by a full path.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBmirror\fR\fR
 .ad
 .RS 10n
-.rt  
 A mirror of two or more devices. Data is replicated in an identical fashion
 across all components of a mirror. A mirror with \fIN\fR disks of size \fIX\fR
 can hold \fIX\fR bytes and can withstand (\fIN-1\fR) devices failing before
@@ -198,7 +192,6 @@ data integrity is compromised.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBraidz\fR\fR
 .ad
@@ -215,7 +208,6 @@ data integrity is compromised.
 \fB\fBraidz3\fR\fR
 .ad
 .RS 10n
-.rt  
 A variation on \fBRAID-5\fR that allows for better distribution of parity and
 eliminates the "\fBRAID-5\fR write hole" (in which data and parity become
 inconsistent after a power loss). Data and parity is striped across all disks
@@ -238,24 +230,20 @@ disks. The recommended number is between 3 and 9 to help increase performance.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBspare\fR\fR
 .ad
 .RS 10n
-.rt  
 A special pseudo-\fBvdev\fR which keeps track of available hot spares for a
 pool. For more information, see the "Hot Spares" section.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlog\fR\fR
 .ad
 .RS 10n
-.rt  
 A separate-intent log device. If more than one log device is specified, then
 writes are load-balanced between devices. Log devices can be mirrored. However,
 \fBraidz\fR \fBvdev\fR types are not supported for the intent log. For more
@@ -264,12 +252,10 @@ information, see the "Intent Log" section.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcache\fR\fR
 .ad
 .RS 10n
-.rt  
 A device used to cache storage pool data. A cache device cannot be cannot be
 configured as a mirror or \fBraidz\fR group. For more information, see the
 "Cache Devices" section.
@@ -329,12 +315,10 @@ devices. A top-level vdev or component device is in one of the following
 states:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBDEGRADED\fR\fR
 .ad
 .RS 12n
-.rt  
 One or more top-level vdevs is in the degraded state because one or more
 component devices are offline. Sufficient replicas exist to continue
 functioning.
@@ -362,12 +346,10 @@ functioning.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBFAULTED\fR\fR
 .ad
 .RS 12n
-.rt  
 One or more top-level vdevs is in the faulted state because one or more
 component devices are offline. Insufficient replicas exist to continue
 functioning.
@@ -392,46 +374,38 @@ prevent further use of the device.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBOFFLINE\fR\fR
 .ad
 .RS 12n
-.rt  
 The device was explicitly taken offline by the "\fBzpool offline\fR" command.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBONLINE\fR\fR
 .ad
 .RS 12n
-.rt  
 The device is online and functioning.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBREMOVED\fR\fR
 .ad
 .RS 12n
-.rt  
 The device was physically removed while the system was running. Device removal
 detection is hardware-dependent and may not be supported on all platforms.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBUNAVAIL\fR\fR
 .ad
 .RS 12n
-.rt  
 The device could not be opened. If a pool is imported when a device was
 unavailable, then the device will be identified by a unique identifier instead
 of its path since the path was never correct in the first place.
@@ -545,70 +519,58 @@ read-only statistics while others are configurable and change the behavior of
 the pool. The following are read-only properties:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBavailable\fR\fR
 .ad
 .RS 20n
-.rt  
 Amount of storage available within the pool. This property can also be referred
 to by its shortened column name, "avail".
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcapacity\fR\fR
 .ad
 .RS 20n
-.rt  
 Percentage of pool space used. This property can also be referred to by its
 shortened column name, "cap".
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBhealth\fR\fR
 .ad
 .RS 20n
-.rt  
 The current health of the pool. Health can be "\fBONLINE\fR", "\fBDEGRADED\fR",
 "\fBFAULTED\fR", " \fBOFFLINE\fR", "\fBREMOVED\fR", or "\fBUNAVAIL\fR".
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBguid\fR\fR
 .ad
 .RS 20n
-.rt  
 A unique identifier for the pool.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBsize\fR\fR
 .ad
 .RS 20n
-.rt  
 Total size of the storage pool.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBused\fR\fR
 .ad
 .RS 20n
-.rt  
 Amount of storage space used within the pool.
 .RE
 
@@ -628,7 +590,6 @@ these discrepancies may become more noticeable.
 The following property can be set at creation time and import time:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBaltroot\fR\fR
 .ad
@@ -639,7 +600,7 @@ points within the pool. This can be used when examining an unknown pool where
 the mount points cannot be trusted, or in an alternate boot environment, where
 the typical paths are not valid. \fBaltroot\fR is not a persistent property. It
 is valid only while the system is up. Setting \fBaltroot\fR defaults to using
-\fBcachefile\fR=none, though this may be overridden	 using an explicit setting.
+\fBcachefile\fR=none, though this may be overridden using an explicit setting.
 .RE
 
 .sp
@@ -648,7 +609,6 @@ The following properties can be set at creation time and import time, and later
 changed with the \fBzpool set\fR command:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBautoexpand\fR=\fBon\fR | \fBoff\fR\fR
 .ad
@@ -664,7 +624,6 @@ can also be referred to by its shortened column name, \fBexpand\fR.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBautoreplace\fR=\fBon\fR | \fBoff\fR\fR
 .ad
@@ -680,7 +639,6 @@ property can also be referred to by its shortened column name, "replace".
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBbootfs\fR=\fIpool\fR/\fIdataset\fR\fR
 .ad
@@ -692,7 +650,6 @@ expected to be set mainly by the installation and upgrade programs.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcachefile\fR=\fIpath\fR | \fBnone\fR\fR
 .ad
@@ -717,7 +674,6 @@ exported or destroyed, the file is removed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBdelegation\fR=\fBon\fR | \fBoff\fR\fR
 .ad
@@ -730,7 +686,6 @@ permissions defined on the dataset. See \fBzfs\fR(1M) for more information on
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBfailmode\fR=\fBwait\fR | \fBcontinue\fR | \fBpanic\fR\fR
 .ad
@@ -742,24 +697,20 @@ storage device(s) or a failure of all devices within the pool. The behavior of
 such an event is determined as follows:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBwait\fR\fR
 .ad
 .RS 12n
-.rt  
 Blocks all \fBI/O\fR access until the device connectivity is recovered and the
 errors are cleared. This is the default behavior.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBcontinue\fR\fR
 .ad
 .RS 12n
-.rt  
 Returns \fBEIO\fR to any new write \fBI/O\fR requests but allows reads to any
 of the remaining healthy devices. Any write requests that have yet to be
 committed to disk would be blocked.
@@ -767,12 +718,10 @@ committed to disk would be blocked.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBpanic\fR\fR
 .ad
 .RS 12n
-.rt  
 Prints out a message to the console and generates a system crash dump.
 .RE
 
@@ -780,7 +729,6 @@ Prints out a message to the console and generates a system crash dump.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBlistsnaps\fR=on | off\fR
 .ad
@@ -793,7 +741,6 @@ value is "off".
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBversion\fR=\fIversion\fR\fR
 .ad
@@ -818,7 +765,6 @@ pools, add capacity to storage pools, and provide information about the storage
 pools. The following subcommands are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool\fR \fB-?\fR\fR
 .ad
@@ -829,7 +775,6 @@ Displays a help message.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool add\fR [\fB-fn\fR] \fIpool\fR \fIvdev\fR ...\fR
 .ad
@@ -841,24 +786,20 @@ the \fB-f\fR option, and the device checks performed are described in the
 "zpool create" subcommand.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 6n
-.rt  
 Forces use of \fBvdev\fRs, even if they appear in use or specify a conflicting
 replication level. Not all devices can be overridden in this manner.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
 .RS 6n
-.rt  
 Displays the configuration that would be used without actually adding the
 \fBvdev\fRs. The actual pool creation can still fail due to insufficient
 privileges or device sharing.
@@ -871,7 +812,6 @@ device.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool attach\fR [\fB-f\fR] \fIpool\fR \fIdevice\fR \fInew_device\fR\fR
 .ad
@@ -886,12 +826,10 @@ three-way mirror, and so on. In either case, \fInew_device\fR begins to
 resilver immediately.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 6n
-.rt  
 Forces use of \fInew_device\fR, even if its appears to be in use. Not all
 devices can be overridden in this manner.
 .RE
@@ -900,7 +838,6 @@ devices can be overridden in this manner.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool clear\fR \fIpool\fR [\fIdevice\fR] ...\fR
 .ad
@@ -913,7 +850,6 @@ those errors associated with the specified device or devices are cleared.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool create\fR [\fB-fn\fR] [\fB-o\fR \fIproperty=value\fR] ... [\fB-O\fR
 \fIfile-system-property=value\fR] ... [\fB-m\fR \fImountpoint\fR] [\fB-R\fR
@@ -946,7 +882,6 @@ root dataset cannot be mounted. This can be overridden with the \fB-m\fR
 option.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -958,7 +893,6 @@ replication level. Not all devices can be overridden in this manner.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-n\fR\fR
 .ad
@@ -971,7 +905,6 @@ device sharing.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIproperty=value\fR [\fB-o\fR \fIproperty=value\fR] ...\fR
 .ad
@@ -983,7 +916,6 @@ valid properties that can be set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-O\fR \fIfile-system-property=value\fR\fR
 .ad
@@ -1000,7 +932,6 @@ can be set.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot\fR\fR
 .ad
@@ -1011,7 +942,6 @@ Equivalent to "-o cachefile=none,altroot=\fIroot\fR"
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-m\fR \fImountpoint\fR\fR
 .ad
@@ -1027,7 +957,6 @@ information on dataset mount points, see \fBzfs\fR(1M).
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool destroy\fR [\fB-f\fR] \fIpool\fR\fR
 .ad
@@ -1037,12 +966,10 @@ Destroys the given pool, freeing up any devices for other use. This command
 tries to unmount any active datasets before destroying the pool.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 6n
-.rt  
 Forces any active datasets contained within the pool to be unmounted.
 .RE
 
@@ -1050,7 +977,6 @@ Forces any active datasets contained within the pool to be unmounted.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool detach\fR \fIpool\fR \fIdevice\fR\fR
 .ad
@@ -1062,7 +988,6 @@ other valid replicas of the data.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool export\fR [\fB-f\fR] \fIpool\fR ...\fR
 .ad
@@ -1082,12 +1007,10 @@ labels. Otherwise, disk drivers on platforms of different endianness will not
 recognize the disks.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 6n
-.rt  
 Forcefully unmount all datasets, using the "\fBunmount -f\fR" command.
 .sp
 This command will forcefully export the pool even if it has a shared spare that
@@ -1098,7 +1021,6 @@ is currently being used. This may lead to potential data corruption.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool get\fR "\fIall\fR" | \fIproperty\fR[,...] \fIpool\fR ...\fR
 .ad
@@ -1124,7 +1046,6 @@ properties.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool history\fR [\fB-il\fR] [\fIpool\fR] ...\fR
 .ad
@@ -1134,24 +1055,20 @@ Displays the command history of the specified pools or all pools if no pool is
 specified.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-i\fR\fR
 .ad
 .RS 6n
-.rt  
 Displays internally logged \fBZFS\fR events in addition to user initiated
 events.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-l\fR\fR
 .ad
 .RS 6n
-.rt  
 Displays log records in long format, which in addition to standard format
 includes, the user name, the hostname, and the zone in which the operation was
 performed.
@@ -1161,7 +1078,6 @@ performed.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool import\fR [\fB-d\fR \fIdir\fR | \fB-c\fR \fIcachefile\fR]
 [\fB-D\fR]\fR
@@ -1181,12 +1097,10 @@ The numeric identifier is unique, and can be used instead of the pool name when
 multiple exported pools of the same name are available.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcachefile\fR\fR
 .ad
 .RS 16n
-.rt  
 Reads configuration from the given \fBcachefile\fR that was created with the
 "\fBcachefile\fR" pool property. This \fBcachefile\fR is used instead of
 searching for devices.
@@ -1194,24 +1108,20 @@ searching for devices.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdir\fR\fR
 .ad
 .RS 16n
-.rt  
 Searches for devices or files in \fIdir\fR. The \fB-d\fR option can be
 specified multiple times.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
 .RS 16n
-.rt  
 Lists destroyed pools only.
 .RE
 
@@ -1219,7 +1129,6 @@ Lists destroyed pools only.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool import\fR [\fB-o\fR \fImntopts\fR] [ \fB-o\fR
 \fIproperty\fR=\fIvalue\fR] ... [\fB-d\fR \fIdir\fR | \fB-c\fR \fIcachefile\fR]
@@ -1234,12 +1143,10 @@ are imported. Destroyed pools, pools that were previously destroyed with the
 is specified.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fImntopts\fR\fR
 .ad
 .RS 21n
-.rt  
 Comma-separated list of mount options to use when mounting datasets within the
 pool. See \fBzfs\fR(1M) for a description of dataset properties and mount
 options.
@@ -1247,24 +1154,20 @@ options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIproperty=value\fR\fR
 .ad
 .RS 21n
-.rt  
 Sets the specified property on the imported pool. See the "Properties" section
 for more information on the available pool properties.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcachefile\fR\fR
 .ad
 .RS 21n
-.rt  
 Reads configuration from the given \fBcachefile\fR that was created with the
 "\fBcachefile\fR" pool property. This \fBcachefile\fR is used instead of
 searching for devices.
@@ -1272,57 +1175,47 @@ searching for devices.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdir\fR\fR
 .ad
 .RS 21n
-.rt  
 Searches for devices or files in \fIdir\fR. The \fB-d\fR option can be
 specified multiple times. This option is incompatible with the \fB-c\fR option.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
 .RS 21n
-.rt  
 Imports destroyed pools only. The \fB-f\fR option is also required.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 21n
-.rt  
 Forces import, even if the pool appears to be potentially active.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 21n
-.rt  
 Searches for and imports all pools found.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot\fR\fR
 .ad
 .RS 21n
-.rt  
 Sets the "\fBcachefile\fR" property to "\fBnone\fR" and the "\fIaltroot\fR"
 property to "\fIroot\fR".
 .RE
@@ -1331,7 +1224,6 @@ property to "\fIroot\fR".
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool import\fR [\fB-o\fR \fImntopts\fR] [ \fB-o\fR
 \fIproperty\fR=\fIvalue\fR] ... [\fB-d\fR \fIdir\fR | \fB-c\fR \fIcachefile\fR]
@@ -1351,7 +1243,6 @@ this was a failed export, or whether the device is really in use from another
 host. To import a pool in this state, the \fB-f\fR option is required.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fImntopts\fR\fR
 .ad
@@ -1364,7 +1255,6 @@ options.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIproperty=value\fR\fR
 .ad
@@ -1376,7 +1266,6 @@ for more information on the available pool properties.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-c\fR \fIcachefile\fR\fR
 .ad
@@ -1389,7 +1278,6 @@ searching for devices.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-d\fR \fIdir\fR\fR
 .ad
@@ -1401,7 +1289,6 @@ specified multiple times. This option is incompatible with the \fB-c\fR option.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-D\fR\fR
 .ad
@@ -1412,7 +1299,6 @@ Imports destroyed pool. The \fB-f\fR option is also required.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
@@ -1423,7 +1309,6 @@ Forces import, even if the pool appears to be potentially active.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-R\fR \fIroot\fR\fR
 .ad
@@ -1437,7 +1322,6 @@ property to "\fIroot\fR".
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool iostat\fR [\fB-T\fR \fBu\fR | \fBd\fR] [\fB-v\fR] [\fIpool\fR] ...
 [\fIinterval\fR[\fIcount\fR]]\fR
@@ -1451,12 +1335,10 @@ system is shown. If \fIcount\fR is specified, the command exits after
 \fIcount\fR reports are printed.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-T\fR \fBu\fR | \fBd\fR\fR
 .ad
 .RS 12n
-.rt  
 Display a time stamp.
 .sp
 Specify \fBu\fR for a printed representation of the internal representation of
@@ -1466,12 +1348,10 @@ time. See \fBtime\fR(2). Specify \fBd\fR for standard date format. See
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 12n
-.rt  
 Verbose statistics. Reports usage statistics for individual \fIvdevs\fR within
 the pool, in addition to the pool-wide statistics.
 .RE
@@ -1480,7 +1360,6 @@ the pool, in addition to the pool-wide statistics.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool list\fR [\fB-H\fR] [\fB-o\fR \fIprops\fR[,...]] [\fIpool\fR] ...\fR
 .ad
@@ -1490,24 +1369,20 @@ Lists the given pools along with a health status and space usage. When given no
 arguments, all pools in the system are listed.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-H\fR\fR
 .ad
 .RS 12n
-.rt  
 Scripted mode. Do not display headers, and separate fields by a single tab
 instead of arbitrary space.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-o\fR \fIprops\fR\fR
 .ad
 .RS 12n
-.rt  
 Comma-separated list of properties to display. See the "Properties" section for
 a list of valid properties. The default list is "name, size, used, available,
 capacity, health, altroot"
@@ -1517,7 +1392,6 @@ capacity, health, altroot"
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool offline\fR [\fB-t\fR] \fIpool\fR \fIdevice\fR ...\fR
 .ad
@@ -1529,12 +1403,10 @@ no attempt is made to read or write to the device.
 This command is not applicable to spares or cache devices.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-t\fR\fR
 .ad
 .RS 6n
-.rt  
 Temporary. Upon reboot, the specified physical device reverts to its previous
 state.
 .RE
@@ -1543,7 +1415,6 @@ state.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool online\fR [\fB-e\fR] \fIpool\fR \fIdevice\fR...\fR
 .ad
@@ -1554,12 +1425,10 @@ Brings the specified physical device online.
 This command is not applicable to spares or cache devices.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-e\fR\fR
 .ad
 .RS 6n
-.rt  
 Expand the device to use all available space. If the device is part of a mirror
 or \fBraidz\fR then all devices must be expanded before the new space will
 become available to the pool.
@@ -1569,7 +1438,6 @@ become available to the pool.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool remove\fR \fIpool\fR \fIdevice\fR ...\fR
 .ad
@@ -1585,7 +1453,6 @@ a pool.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool replace\fR [\fB-f\fR] \fIpool\fR \fIold_device\fR
 [\fInew_device\fR]\fR
@@ -1606,12 +1473,10 @@ this case, the new disk may have the same \fB/dev/dsk\fR path as the old
 device, even though it is actually a different disk. \fBZFS\fR recognizes this.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-f\fR\fR
 .ad
 .RS 6n
-.rt  
 Forces use of \fInew_device\fR, even if its appears to be in use. Not all
 devices can be overridden in this manner.
 .RE
@@ -1620,7 +1485,6 @@ devices can be overridden in this manner.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool scrub\fR [\fB-s\fR] \fIpool\fR ...\fR
 .ad
@@ -1645,12 +1509,10 @@ progress, \fBZFS\fR does not allow a scrub to be started until the resilver
 completes.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-s\fR\fR
 .ad
 .RS 6n
-.rt  
 Stop scrubbing.
 .RE
 
@@ -1658,7 +1520,6 @@ Stop scrubbing.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool set\fR \fIproperty\fR=\fIvalue\fR \fIpool\fR\fR
 .ad
@@ -1670,7 +1531,6 @@ more information on what properties can be set and acceptable values.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool status\fR [\fB-xv\fR] [\fIpool\fR] ...\fR
 .ad
@@ -1687,24 +1547,20 @@ because the amount of data in the pool and the other workloads on the system
 can change.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-x\fR\fR
 .ad
 .RS 6n
-.rt  
 Only display status for pools that are exhibiting errors or are otherwise
 unavailable.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
 .RS 6n
-.rt  
 Displays verbose data error information, printing out a complete list of all
 data errors since the last complete pool scrub.
 .RE
@@ -1713,7 +1569,6 @@ data errors since the last complete pool scrub.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool upgrade\fR\fR
 .ad
@@ -1728,7 +1583,6 @@ inaccessible on the system.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool upgrade\fR \fB-v\fR\fR
 .ad
@@ -1741,7 +1595,6 @@ with an explanation of the features provided with each version.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fBzpool upgrade\fR [\fB-V\fR \fIversion\fR] \fB-a\fR | \fIpool\fR ...\fR
 .ad
@@ -1752,23 +1605,19 @@ pool will no longer be accessible on systems running older versions of the
 software.
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-a\fR\fR
 .ad
 .RS 14n
-.rt  
 Upgrades all pools.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-V\fR \fIversion\fR\fR
 .ad
 .RS 14n
-.rt  
 Upgrade to the specified version. If the \fB-V\fR flag is not specified, the
 pool is upgraded to the most recent version. This option can only be used to
 increase the version number, and only up to the most recent version supported
@@ -2092,34 +1941,28 @@ The command to remove the mirrored log \fBmirror-2\fR is:
 The following exit values are returned:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB0\fR\fR
 .ad
 .RS 5n
-.rt  
 Successful completion.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB1\fR\fR
 .ad
 .RS 5n
-.rt  
 An error occurred.
 .RE
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB2\fR\fR
 .ad
 .RS 5n
-.rt  
 Invalid command line options were specified.
 .RE
 
@@ -2131,13 +1974,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityEvolving
+Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
diff --git a/usr/src/man/man1m/zstreamdump.1m b/usr/src/man/man1m/zstreamdump.1m
index d8b5e94681..70f6ee875e 100644
--- a/usr/src/man/man1m/zstreamdump.1m
+++ b/usr/src/man/man1m/zstreamdump.1m
@@ -3,7 +3,7 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH zstreamdump 1M "21 Sep 2009" "SunOS 5.11" "System Administration Commands"
+.TH ZSTREAMDUMP 1M "Sep 21, 2009"
 .SH NAME
 zstreamdump \- filter data in zfs send stream
 .SH SYNOPSIS
@@ -24,7 +24,6 @@ command, then displays headers and some statistics from that output.  See
 The following options are supported:
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-C\fR\fR
 .ad
@@ -35,7 +34,6 @@ Suppress the validation of checksums.
 
 .sp
 .ne 2
-.mk
 .na
 \fB\fB-v\fR\fR
 .ad
@@ -52,13 +50,12 @@ See \fBattributes\fR(5) for descriptions of the following attributes:
 
 .sp
 .TS
-tab() box;
-cw(2.75i) |cw(2.75i) 
-lw(2.75i) |lw(2.75i) 
-.
-ATTRIBUTE TYPEATTRIBUTE VALUE
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
 _
-Interface StabilityUncommitted
+Interface Stability	Uncommitted
 .TE
 
 .SH SEE ALSO