4 files changed, 209 insertions, 13 deletions
diff --git a/usr/src/man/man7d/Makefile b/usr/src/man/man7d/Makefile
index eb75db718a..6e8550e309 100644
--- a/usr/src/man/man7d/Makefile
+++ b/usr/src/man/man7d/Makefile
@@ -13,6 +13,7 @@
 # Copyright 2011, Richard Lowe
 # Copyright 2015 Nexenta Systems, Inc.  All rights reserved.
 # Copyright 2014 Garrett D'Amore <garrett@damore.org>
+# Copyright 2014 Joyent, Inc. All rights reserved.
 #
 
 include		$(SRC)/Makefile.master
@@ -142,11 +143,13 @@ _MANFILES=	aac.7d		\
 		virtualkm.7d	\
 		vni.7d		\
 		vr.7d		\
+		vnd.7d		\
 		wscons.7d	\
 		xge.7d		\
 		yge.7d		\
 		zcons.7d	\
-		zero.7d
+		zero.7d		\
+		zfd.7d
 
 sparc_MANFILES=	audiocs.7d	\
 		bbc_beep.7d	\
diff --git a/usr/src/man/man7d/cpuid.7d b/usr/src/man/man7d/cpuid.7d
index 1ede29ccc5..b14cc64742 100644
--- a/usr/src/man/man7d/cpuid.7d
+++ b/usr/src/man/man7d/cpuid.7d
@@ -1,9 +1,10 @@
 '\" te
 .\" Copyright (c) 2004, Sun Microsystems, Inc.  All Rights Reserved
+.\" Copyright 2015, Joyent, Inc.
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH CPUID 7D "Sep 16, 2004"
+.TH CPUID 7D "Jun 04, 2015"
 .SH NAME
 cpuid \- CPU identification driver
 .SH SYNOPSIS
@@ -14,29 +15,24 @@ cpuid \- CPU identification driver
 
 .SH DESCRIPTION
 .SS "SPARC and x86 system"
-.sp
 .LP
 This device provides implementation-private information via ioctls about
 various aspects of the implementation to Solaris libraries and utilities.
 .SS "x86 systems only"
-.sp
 .LP
 This device also provides a file-like view of the namespace and return values
 of the x86 cpuid instruction. The cpuid instruction takes a single 32-bit
 integer function code, and returns four 32-bit integer values corresponding to
 the input value that describe various aspects of the capabilities and
 configuration of the processor.
-.sp
 .LP
 The API for the character device consists of using the seek offset to set the
 function code value, and using a \fBread\fR(2) or \fBpread\fR(2) of 16 bytes to
 fetch the four 32-bit return values of the instruction in the order %\fBeax\fR,
 %\fBebx\fR, %\fBecx\fR and %\fBedx\fR.
-.sp
 .LP
 No data can be written to the device. Like the \fBcpuid\fR instruction, no
 special privileges are required to use the device.
-.sp
 .LP
 The device is useful to enable low-level configuration information to be
 extracted from the CPU without having to write any assembler code to invoke the
@@ -44,13 +40,15 @@ extracted from the CPU without having to write any assembler code to invoke the
 correct any erroneous data returned by the instruction (prompted by occassional
 errors in the information exported by various processor implementations over
 the years).
-.sp
 .LP
 See the processor manufacturers documentation for further information about the
 syntax and semantics of the wide variety of information available from this
 instruction.
+.LP
+Some systems can be configured to limit the cpuid opcodes which are accessible.
+While illumos handles this condition, other software may malfunction when such
+limits are enabled.  Those settings are typically manipulated in the BIOS.
 .SH EXAMPLE
-.sp
 .LP
 This example allows you to determine if the current x86 processor supports
 "long mode," which is a necessary (but not sufficient) condition for running
@@ -113,7 +111,6 @@ fail:
 .in -2
 
 .SH ERRORS
-.sp
 .ne 2
 .na
 \fBENXIO\fR
@@ -134,7 +131,6 @@ with a size that is not multiple of 16 bytes.
 .RE
 
 .SH FILES
-.sp
 .ne 2
 .na
 \fB\fB/dev/cpu/self/cpuid\fR\fR
@@ -144,7 +140,6 @@ Provides access to CPU identification data.
 .RE
 
 .SH ATTRIBUTES
-.sp
 .LP
 See \fBattributes\fR(5) for descriptions of the following attributes:
 .sp
@@ -160,7 +155,6 @@ Interface Stability	Evolving
 .TE
 
 .SH SEE ALSO
-.sp
 .LP
 \fBpsrinfo\fR(1M), \fBprtconf\fR(1M), \fBpread\fR(2), \fBread\fR(2),
 \fBattributes\fR(5)
diff --git a/usr/src/man/man7d/vnd.7d b/usr/src/man/man7d/vnd.7d
new file mode 100644
index 0000000000..d311c4dc08
--- /dev/null
+++ b/usr/src/man/man7d/vnd.7d
@@ -0,0 +1,118 @@
+'\" te
+.\"
+.\" This file and its contents are supplied under the terms of the
+.\" Common Development and Distribution License ("CDDL"), version 1.0.
+.\" You may only use this file in accordance with the terms of version
+.\" 1.0 of the CDDL.
+.\"
+.\" A full copy of the text of the CDDL should have accompanied this
+.\" source.  A copy of the CDDL is also available via the Internet at
+.\" http://www.illumos.org/license/CDDL.
+.\"
+.\"
+.\" Copyright (c) 2014, Joyent, Inc.  All rights reserved.
+.\"
+.TH VND 7D "Feb 11, 2014"
+.SH NAME
+vnd \- virtual layer two network driver
+
+.SH SYNOPSIS
+.nf
+.LP
+/dev/vnd/ctl
+.LP
+/dev/vnd/*
+.fi
+
+.SH DESCRIPTION
+.sp
+.LP
+The vnd driver provides support for a layer two datapath in an
+analogous way that IP(7P) provides a support for an IP-based layer
+three datapath. Both devices operate exclusively on datalinks. A
+datalink that has been plumbed up with IP via ifconfig(1M) or
+ipadm(1M) cannot be used with vnd or vice-versa.
+.sp
+.LP
+The vnd driver supports and takes advantage of the the following
+illumos features:
+.RS
+.sp
+.LP
+Supports dld/dls feature negotation of GLDv3 features, such
+as direct calls, flow control, checksum offloading, and more.
+.sp
+.LP
+All IP and IPv6 based traffic is sent through ipfilter(5),
+allowing packet filtering.
+.sp
+.LP
+Better control over vectored reads and writes in a frame-centric manner
+through framed I/O. See libvnd(3LIB) for more information on these
+interfaces.
+.RE
+.sp
+.LP
+The vnd driver exposes two different kinds of device nodes. The first is
+a self-cloning control node which can be used to create vnd devices on
+top of datalinks. Those devices can optionally be bound into the file
+system namespace under /dev/vnd. Control operations on the control node
+or named devices are private to the implementation. Instead,
+libvnd(3LIB) provides a stable interfaces for using, creating, and
+manipulating vnd devices.
+.sp
+.SH FILES
+.sp
+.ne 2
+.na
+/dev/vnd/ctl
+.ad
+.RS 16n
+vnd self-cloning control node
+.RE
+
+.sp
+.ne 2
+.na
+/dev/vnd/%link
+.ad
+.RS 16n
+Character device that corresponds to the vnd device of the given
+name (%link). A given device will appear for each actively linked device
+in the current zone.
+.RE
+
+.sp
+.ne 2
+.na
+/dev/vnd/zone/%zone/%link
+.ad
+.RS 16n
+These are character devices that correspond to the vnd device of
+the given name (%link). They are organized based on the zone that they
+appear in. Thus if a zone named foo has a vnd device named
+bar, then the global zone will have the file
+/dev/vnd/zone/foo/bar. Note, these only occur in the global zone.
+.RE
+
+.SH ATTRIBUTES
+.sp
+.LP
+See attributes(5) for descriptions of the following attributes:
+.sp
+
+.sp
+.TS
+box;
+c | c
+l | l .
+ATTRIBUTE TYPE	ATTRIBUTE VALUE
+_
+Interface Stability	Evolving
+.TE
+
+.SH SEE ALSO
+.sp
+.LP
+dladm(1M), ipflter(5), libvnd(3LIB), vndadm(1M),
+vndstat(1)
diff --git a/usr/src/man/man7d/zfd.7d b/usr/src/man/man7d/zfd.7d
new file mode 100644
index 0000000000..71b3084fdc
--- /dev/null
+++ b/usr/src/man/man7d/zfd.7d
@@ -0,0 +1,81 @@
+.\"
+.\" This file and its contents are supplied under the terms of the
+.\" Common Development and Distribution License ("CDDL"), version 1.0.
+.\" You may only use this file in accordance with the terms of version
+.\" 1.0 of the CDDL.
+.\"
+.\" A full copy of the text of the CDDL should have accompanied this
+.\" source.  A copy of the CDDL is also available via the Internet at
+.\" http://www.illumos.org/license/CDDL.
+.\"
+.\"
+.\" Copyright 2015, Joyent, Inc. All rights reserved.
+.\"
+.Dd "Oct 16, 2015"
+.Dt ZFD 7D
+.Os
+.Sh NAME
+.Nm zfd
+.Nd Zone file descriptor driver
+.Sh DESCRIPTION
+The
+.Nm zfd
+character driver exports devices into the zone which can be used by a
+a standalone process within the zone as
+.Vt stdin ,
+.Vt stdout ,
+and
+.Vt stderr .
+The
+.Nm zfd
+driver behaves in a similar manner as the
+.Nm zcons(7D)
+device.
+Inside a zone, the slave side devices appear as
+.Nm /dev/zfd/[0-4] .
+.sp
+The zone's zfd device configuration is driven by
+.Nm zoneadmd
+and a zone attribute
+.Nm zlog-mode
+which is somewhat of a misnomer since its purpose has evolved. The attribute
+can have a variety of values, but the lowest two positions in the value string
+are used to control how many zfd devices are created inside the zone and if the
+primary stream is a tty.
+.sp
+.Dl --
+.Dl -n
+.Dl t-
+.Dl tn
+.sp
+With the
+.Nm t
+flag set,
+.Vt stdin ,
+.Vt stdout ,
+and
+.Vt stderr ,
+are multiplexed onto a single full-duplex stream which is configured as a tty.
+That is,
+.Nm ptem ,
+.Nm ldterm
+and
+.Nm ttycompat
+are autopushed onto the stream when the slave side is opened. There is only a
+single zfd device (0) needed for the primary stream.
+.sp
+When the
+.Nm n
+flag is set, it is assumed that output logging will be done within the zone
+itself. In this configuration 1 or 2 additional zfd devices, depending on tty
+mode
+.Nm ( t
+flag), are created within the zone. An application can then configure the
+zfd streams driver into a multiplexer. Output from the stdout/stderr zfd(s)
+will be teed into the correspond logging zfd(s) within the zone.
+.sp
+.Sh SEE ALSO
+.Xr zlogin 1 ,
+.Xr zoneadmd 1M ,
+.Xr zonecfg 1M ,
+.Xr zcons 7D