summaryrefslogtreecommitdiff
path: root/usr/src/man/man7d
diff options
context:
space:
mode:
Diffstat (limited to 'usr/src/man/man7d')
-rw-r--r--usr/src/man/man7d/cpuid.7d4
-rw-r--r--usr/src/man/man7d/ibd.7d11
-rw-r--r--usr/src/man/man7d/poll.7d4
-rw-r--r--usr/src/man/man7d/sgen.7d15
-rw-r--r--usr/src/man/man7d/st.7d19
-rw-r--r--usr/src/man/man7d/su.7d12
-rw-r--r--usr/src/man/man7d/ugen.7d29
-rw-r--r--usr/src/man/man7d/usba.7d10
-rw-r--r--usr/src/man/man7d/usbprn.7d16
-rw-r--r--usr/src/man/man7d/zs.7d11
10 files changed, 24 insertions, 107 deletions
diff --git a/usr/src/man/man7d/cpuid.7d b/usr/src/man/man7d/cpuid.7d
index b14cc64742..f24f73ed40 100644
--- a/usr/src/man/man7d/cpuid.7d
+++ b/usr/src/man/man7d/cpuid.7d
@@ -4,7 +4,7 @@
.\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
.\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
.\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH CPUID 7D "Jun 04, 2015"
+.TH CPUID 7D "April 9, 2016"
.SH NAME
cpuid \- CPU identification driver
.SH SYNOPSIS
@@ -37,7 +37,7 @@ special privileges are required to use the device.
The device is useful to enable low-level configuration information to be
extracted from the CPU without having to write any assembler code to invoke the
\fBcpuid\fR instruction directly. It also allows the kernel to attempt to
-correct any erroneous data returned by the instruction (prompted by occassional
+correct any erroneous data returned by the instruction (prompted by occasional
errors in the information exported by various processor implementations over
the years).
.LP
diff --git a/usr/src/man/man7d/ibd.7d b/usr/src/man/man7d/ibd.7d
index 8ba14f7d63..90350ac5c9 100644
--- a/usr/src/man/man7d/ibd.7d
+++ b/usr/src/man/man7d/ibd.7d
@@ -3,7 +3,7 @@
.\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
.\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
.\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH IBD 7D "Jul 20, 2007"
+.TH IBD 7D "April 9, 2016"
.SH NAME
ibd \- Infiniband IPoIB device driver
.SH SYNOPSIS
@@ -13,7 +13,6 @@ ibd \- Infiniband IPoIB device driver
.fi
.SH DESCRIPTION
-.sp
.LP
The \fBibd\fR driver implements the IETF IP over Infiniband protocol and
provides IPoIB service for all IBA ports present in the system.
@@ -47,9 +46,8 @@ address 255.255.255.255 (also defined as broadcast-GID in IETF documents) must
be created prior to initializing the device. IBA properties (including mtu,
qkey and sl) of this group is used by the driver to create any other IBA
multicast group as instructed by higher level (IP) software. The driver probes
-for the existance of this broadcast-GID during \fBattach\fR(9E).
+for the existence of this broadcast-GID during \fBattach\fR(9E).
.SH APPLICATION PROGRAMMING INTERFACE (DLPI)
-.sp
.LP
The values returned by the driver in the DL_INFO_ACK primitive in response to
your DL_INFO_REQ are:
@@ -102,7 +100,6 @@ applications receive the IP/ARP datagram along with the IETF defined 4 byte
header.
.RE
.SH WARNING
-.sp
.LP
This section describes warning messages that might be generated by the driver.
Please note that while the format of these messages may be modified in future
@@ -193,13 +190,11 @@ should be checked that IBA cabling is intact, an SM is running on the fabric,
and the broadcast-GID with appropriate properties has been created in the IBA
partition.
.SH CONFIGURATION
-.sp
.LP
The IPoIB service comes preconfigured on all HCA ports in the system. To turn
the service off, or back on after turning it off, refer to documentation in
\fBcfgadm_ib(1M)\fR.
.SH FILES
-.sp
.ne 2
.na
\fB\fB/dev/ibd*\fR\fR
@@ -245,13 +240,11 @@ configuration file to start IPoIB service
.RE
.SH SEE ALSO
-.sp
.LP
\fBcfgadm\fR(1M), \fBcfgadm_ib(1M)\fR, \fBifconfig\fR(1M), \fBsyslogd\fR(1M),
\fBgld\fR(7D), \fBib\fR(7D), \fBkstat\fR(7D), \fBstreamio\fR(7I),
\fBdlpi\fR(7P), \fBattributes\fR(5), \fBattach\fR(9E)
.SH NOTES
-.sp
.LP
IBD is a GLD-based driver and provides the statistics described by
\fBgld\fR(7D). Note that valid received packets not accepted by any stream
diff --git a/usr/src/man/man7d/poll.7d b/usr/src/man/man7d/poll.7d
index e3d9e074aa..450da9ec5b 100644
--- a/usr/src/man/man7d/poll.7d
+++ b/usr/src/man/man7d/poll.7d
@@ -3,7 +3,7 @@
.\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
.\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
.\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH POLL 7D "Sep 10, 2013"
+.TH POLL 7D "April 9, 2016"
.SH NAME
poll \- driver for fast poll on many file descriptors
.SH SYNOPSIS
@@ -109,7 +109,7 @@ successfully or \fB-1\fR when write fails.
.sp
.LP
The \fBDP_POLL\fR ioctl is used to retrieve returned \fBpoll\fR \fBevents\fR
-occured on the polled file descriptors in the monitored set represented by
+occurred on the polled file descriptors in the monitored set represented by
\fIfd\fR. \fIarg\fR \fIis\fR \fIa\fR pointer to the devpoll structures which
are defined as follows:
.sp
diff --git a/usr/src/man/man7d/sgen.7d b/usr/src/man/man7d/sgen.7d
index 4578497f6b..dc2c9078f1 100644
--- a/usr/src/man/man7d/sgen.7d
+++ b/usr/src/man/man7d/sgen.7d
@@ -3,7 +3,7 @@
.\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
.\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
.\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH SGEN 7D "Mar 29, 2008"
+.TH SGEN 7D "April 9, 2016"
.SH NAME
sgen \- Generic SCSI device driver
.SH SYNOPSIS
@@ -18,14 +18,12 @@ sgen \- Generic SCSI device driver
.fi
.SH DESCRIPTION
-.sp
.LP
The \fBsgen\fR driver exports the \fBuscsi\fR(7I) interfaces to user processes.
The \fBsgen\fR driver can be configured to bind to \fBSCSI\fR devices for which
no system driver is available. Examples of such devices include \fBSCSI\fR
scanners and \fBSCSI\fR processor devices.
.SH SECURITY
-.sp
.LP
Typically, drivers which export the \fBuscsi\fR(7I) interface unconditionally
require that the user present superuser credentials. The \fBsgen\fR driver does
@@ -49,11 +47,10 @@ device may create other problems. It may be possible for a user to instruct a
target device to gather data from another target device on the same bus. It may
also be possible for malicious users to install new firmware onto a device to
which they are granted access. In environments where security is a concern but
-user access to devices controlled by the \fBsgen\fR driver is nontheless
+user access to devices controlled by the \fBsgen\fR driver is nonetheless
desired, it is recommended that the devices be separated onto a dedicated
\fBSCSI\fR bus to mitigate the risk of data corruption and security violations.
.SH CONFIGURATION
-.sp
.LP
The \fBsgen\fR driver is configurable via the \fBsgen.conf\fR file. In addition
to standard \fBSCSI\fR device configuration directives (see \fBscsi\fR(4)),
@@ -103,7 +100,6 @@ larger systems with many \fBSCSI\fR controllers, carefully edit the
\fBsgen.conf\fR file so that \fBsgen\fR binds only where needed. Refer to
\fBdriver.conf\fR(4) for further details.
.SH PROPERTIES
-.sp
.ne 2
.na
\fB\fBinquiry-config-list\fR\fR
@@ -294,10 +290,9 @@ contents of each CDB passed to the driver.
.sp
.LP
In ascending order, each level includes the diagnostics that the previous level
-reports. See the IOCTLS section for more infomation on the \fBSGEN_IOC_DIAG\fR
+reports. See the IOCTLS section for more information on the \fBSGEN_IOC_DIAG\fR
ioctl.
.SH FILES
-.sp
.ne 2
.na
\fB\fBsgen.conf\fR\fR
@@ -326,7 +321,6 @@ for naming disks. For example, \fB/dev/dsk/c0t0d0s0\fR and
.RE
.SH IOCTLS
-.sp
.LP
The \fBsgen\fR driver exports the \fBuscsi\fR(7I) interface for each device it
manages. This allows a user process to talk directly to a \fBSCSI\fR device for
@@ -354,7 +348,6 @@ meaning as in the \fBsgen-diag\fR property discussed in PROPERTIES above.
.RE
.SH ERRORS
-.sp
.ne 2
.na
\fB\fBEBUSY\fR\fR
@@ -384,7 +377,6 @@ Indicates that the device does not support the requested ioctl function.
.RE
.SH EXAMPLES
-.sp
.LP
Here is an example of how \fBsgen\fR can be configured to bind to scanner
devices on the system:
@@ -411,7 +403,6 @@ For large systems where boot times are a concern, it is recommended that the
\fBparent=""\fR property be used to specify which \fBSCSI\fR bus \fBsgen\fR
should examine.
.SH SEE ALSO
-.sp
.LP
\fBdriver.conf\fR(4), \fBscsi\fR(4), \fBsd\fR(7D), \fBst\fR(7D),
\fBuscsi\fR(7I)
diff --git a/usr/src/man/man7d/st.7d b/usr/src/man/man7d/st.7d
index e1d5ae3c53..2e1ab1ca38 100644
--- a/usr/src/man/man7d/st.7d
+++ b/usr/src/man/man7d/st.7d
@@ -3,7 +3,7 @@
.\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
.\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
.\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ST 7D "Oct 22, 2008"
+.TH ST 7D "April 9, 2016"
.SH NAME
st \- driver for SCSI tape devices
.SH SYNOPSIS
@@ -13,7 +13,6 @@ st \- driver for SCSI tape devices
.fi
.SH DESCRIPTION
-.sp
.LP
The \fBst\fR device driver provides a standard interface to various \fBSCSI\fR
tape devices. See \fBmtio\fR(7I) for details.
@@ -88,13 +87,11 @@ open, as per the POSIX standard (see \fBstandards\fR(5)). However, if a command
not found in the above list is used, a reservation will occur to provide
reserve/release functionality before the command is issued.
.SS "Persistent Errors and Asynchronous Tape Operation"
-.sp
.LP
The \fBst\fR driver now supports persistent errors (see \fBmtio\fR(7I) and
asynchronous tape operations (see \fBmtio\fR(7I), \fBaioread\fR(3C), and
\fBaiowrite\fR(3C)).
.SS "Read Operation"
-.sp
.LP
If the driver is opened for reading in a different format than the tape is
written in, the driver overrides the user-selected format. For example, if a
@@ -109,12 +106,10 @@ message to inform you of an overridden format selection. Some devices
automatically perform this function and do not require driver support (1/2"
reel tape drive, for example).
.SS "Write Operation"
-.sp
.LP
Writing from the beginning of tape is performed in the user-specified format.
The original tape format is used for appending onto previously written tapes.
.SS "Tape Configuration"
-.sp
.LP
The \fBst\fR driver has a built-in configuration table for most Sun-supported
tape drives. For those tape drives that are not in the table, the \fBst\fR
@@ -479,7 +474,7 @@ release on close. If an attempt to use a ioctl of \fBMTRESERVE\fR or
.RS 4n
The \fBST_READ_IGNORE_ILI\fR flag is applicable only to variable block devices
which support the SILI bit option. The \fBST_READ_IGNORE_ILI\fR flag indicates
-that SILI (supress incorrect length indicator) bit will be set during reads.
+that SILI (suppress incorrect length indicator) bit will be set during reads.
When this flag is set, short reads (requested read size is less than the record
size on the tape) will be successful and the number of bytes transferred will
be equal to the record size on the tape. The tape will be positioned at the
@@ -626,7 +621,6 @@ before issuing the unload.
\fB<erase time-out>\fR Time in seconds to preform a full (BOT to EOT) erase of
longest medium with worst case error recovery.
.SS "Device Statistics Support"
-.sp
.LP
Each device maintains I/O statistics both for the device and for each partition
allocated on that device. For each device/partition, the driver accumulates
@@ -640,7 +634,6 @@ Each device also has error statistics associated with it. These must include
counters for hard errors, soft errors and transport errors. Other data may be
implemented as required.
.SH IOCTLS
-.sp
.LP
The behavior of \fBSCSI\fR tape positioning ioctls is the same across all
devices which support them. (Refer to \fBmtio\fR(7I).) However, not all devices
@@ -671,7 +664,6 @@ Note that the error status is reset by the \fBMTIOCGET\fR get status ioctl call
or by the next read, write, or other ioctl operation. If no error has occurred
(sense key is \fB0\fR), the current file and record position is returned.
.SH ERRORS
-.sp
.ne 2
.na
\fB\fBEACCES\fR\fR
@@ -805,7 +797,6 @@ name="st" class="scsi"
.in -2
.SS "Large Record Sizes"
-.sp
.LP
To support applications such as seismic programs that require large record
sizes, the flag \fBST_NO_RECSIZE_LIMIT\fR must be set in drive option in the
@@ -831,7 +822,6 @@ platforms.
.LP
(Refer to the \fBWARNINGS\fR section for more information.)
.SS "EOT Handling"
-.sp
.LP
The Emulex drives have only a physical end of tape (PEOT); thus it is not
possible to write past EOT. All other drives have a logical end of tape
@@ -854,7 +844,6 @@ Reading past \fBEOT\fR is transparent to the user. Reading is stopped only by
reading EOF's. For 1/2" reel devices, it is possible to read off the end of the
reel if one reads past the two file marks which mark the end of recorded media.
.SH FILES
-.sp
.ne 2
.na
\fB\fB/kernel/drv/st.conf\fR\fR
@@ -959,14 +948,12 @@ l l .
.RE
.SH SEE ALSO
-.sp
.LP
\fBmt\fR(1), \fBmodload\fR(1M), \fBmodunload\fR(1M), \fBopen\fR(2),
\fBread\fR(2), \fBwrite\fR(2), \fBaioread\fR(3C), \fBaiowrite\fR(3C),
\fBkstat\fR(3KSTAT), \fBdriver.conf\fR(4), \fBscsi\fR(4), \fBstandards\fR(5),
\fBesp\fR(7D), \fBisp\fR(7D), \fBmtio\fR(7I), \fBioctl\fR(9E)
.SH DIAGNOSTICS
-.sp
.LP
The \fBst\fR driver diagnostics may be printed to the console or messages file.
.sp
@@ -1381,7 +1368,6 @@ These diagnostics are only seen with tape drives with the
ST_RETRY_ON_RECOVERED_DEFERRED_ERROR bit set. See \fBstdef.h\fR for explanation
of the specific usage of this setting.
.SH WARNINGS
-.sp
.LP
Effective with Solaris 2.4, the \fBST_NO_RECSIZE_LIMIT\fR flag is set for the
built-in config entries of the Archive \fBDAT\fR and Exabyte drivers by
@@ -1399,7 +1385,6 @@ reading of tapes written prior to Solaris 2.4 with large block sizes.
.LP
(Refer to \fBmtio\fR(7I) for a description of maximum record sizes.)
.SH BUGS
-.sp
.LP
Tape devices that do not return a \fBBUSY\fR status during tape loading prevent
user commands from being held until the device is ready. The user must delay
diff --git a/usr/src/man/man7d/su.7d b/usr/src/man/man7d/su.7d
index eb04fe961b..8c13961dea 100644
--- a/usr/src/man/man7d/su.7d
+++ b/usr/src/man/man7d/su.7d
@@ -3,7 +3,7 @@
.\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
.\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
.\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH SU 7D "Jun 18, 2004"
+.TH SU 7D "April 9, 2016"
.SH NAME
su \- asynchronous serial port driver
.SH SYNOPSIS
@@ -22,11 +22,10 @@ open("/dev/cua\fI[a-z]\fR", _\fImode\fR);
.fi
.SH DESCRIPTION
-.sp
.LP
The \fBsu\fR module is a loadable STREAMS driver that provides basic support
for standard \fBUARTS\fR that use Intel-8250, National
-Semiconductor-16450/16550 hardware and Southbridge 1535D (16550 compatable)
+Semiconductor-16450/16550 hardware and Southbridge 1535D (16550 compatible)
Super I/O hardware. The module also provides keyboard and mouse I/O support for
Sun machines using those same Intel, National Semiconductor and Southbridge
chipsets. The \fBsu\fR driver provides basic asynchronous communication support
@@ -62,7 +61,6 @@ device number. By accessing character-special devices with names of the form
Detect\fR signal being asserted, either through hardware or an equivalent
software mechanism. These devices are commonly known as \fI_dial-out_\fR lines.
.SH APPLICATION PROGRAMMING INTERFACE
-.sp
.LP
Once a \fB/dev/cua\fR\fI_n_\fR line is opened, the corresponding tty, or ttyd
line cannot be opened until the \fB/dev/cua\fR\fI_n_\fR line is closed. A
@@ -77,7 +75,6 @@ renamed from \fB/dev/tty00\fR) and used for dial-in (by enabling the line for
login in \fB/etc/inittab\fR) or dial-out (by \fBtip\fR(1) or \fBuucp\fR(1C)) as
\fB/dev/cua0\fR when no one is logged in on the line.
.SH IOCTLS
-.sp
.LP
The standard set of \fBtermio\fR \fBioctl()\fR calls are supported by \fBsu\fR.
.sp
@@ -122,7 +119,6 @@ carriage return, tilde and control-B (CR ~ CTRL-B), but may be changed by the
driver. For more information on breaking (entering the debugger or monitor),
see \fBkbd\fR(1) and \fBkb\fR(7M).
.SH ERRORS
-.sp
.LP
An \fBopen()\fR will fail under the following conditions:
.sp
@@ -156,7 +152,6 @@ The unit has been marked as exclusive-use by another process with a
.RE
.SH FILES
-.sp
.ne 2
.na
\fB\fB/dev/cua/[a-z]\fR\fR
@@ -184,7 +179,6 @@ binary compatibility package device names
.RE
.SH ATTRIBUTES
-.sp
.LP
See \fBattributes\fR(5) for descriptions of the following attributes:
.sp
@@ -200,14 +194,12 @@ Architecture SPARC
.TE
.SH SEE ALSO
-.sp
.LP
\fBstrconf\fR(1), \fBkbd\fR(1), \fBtip\fR(1),\fBuucp\fR(1C),
\fBautopush\fR(1M), \fBkstat\fR(1M), \fBpppd\fR(1M), \fBioctl\fR(2),
\fBopen\fR(2), \fBtermios\fR(3C), \fBdacf.conf\fR(4), \fBattributes\fR(5),
\fBkb\fR(7M), \fBldterm\fR(7M), \fBttcompat\fR(7M), \fBtermio\fR(7I)
.SH DIAGNOSTICS
-.sp
.LP
The \fBsu\fR driver keeps track of various warning and error conditions using
\fBkstat\fR counters. The output of the \fBkstat su\fR command provides
diff --git a/usr/src/man/man7d/ugen.7d b/usr/src/man/man7d/ugen.7d
index a9a5b11305..d870b946bc 100644
--- a/usr/src/man/man7d/ugen.7d
+++ b/usr/src/man/man7d/ugen.7d
@@ -3,7 +3,7 @@
.\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
.\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
.\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH UGEN 7D "Sep 10, 2013"
+.TH UGEN 7D "April 9, 2016"
.SH NAME
ugen \- USB generic driver
.SH SYNOPSIS
@@ -18,13 +18,12 @@ ugen \- USB generic driver
.fi
.SH DESCRIPTION
-.sp
.LP
\fBugen\fR is a generic USBA (Solaris USB Architecture) compliant client
character driver that presents USB devices to applications through a standard
\fBopen\fR(2), \fBclose\fR(2), \fBread\fR(2), \fBwrite\fR(2),
\fBaioread\fR(3C), \fBaiowrite\fR(3C) Unix interface. Uninterpreted raw data
-are transfered to and from the device via file descriptors created for each USB
+are transferred to and from the device via file descriptors created for each USB
endpoint. Status is obtained by reading file descriptors created for endpoint
and full device status.
.sp
@@ -34,7 +33,6 @@ transfers. \fBlibusb\fR(3LIB) uses \fBugen\fR to access devices that do not
contain drivers (such as digital cameras and PDAs). Refer to
\fB/usr/sfw/share/doc/libusb/libusb.txt\fR for details.
.SH BINDING
-.sp
.LP
In general, no explicit binding of the \fBugen\fR driver is necessary because
\fBusb_mid\fR(7D) is the default driver for devices without a class or vendor
@@ -162,7 +160,6 @@ ugen driver device-bindings.
Any pre-existing ugen driver device-bindings are preserved across operating
system upgrades.
.SH LOGICAL DEVICE NAME FORMAT
-.sp
.LP
For each device or child device it manages, \fBugen\fR creates one logical
device name for device-wide status and one logical device name for endpoint 0.
@@ -305,7 +302,6 @@ alternate interface. A configuration change is prohibited when any non-zero
endpoint device nodes are open. An alternate interface switch is prohibited if
any endpoint in the same interface is open.
.SH HOT-PLUGGING
-.sp
.LP
A device may be hot-removed at any time. Following hot-removal, the device
status changes to USB_DEV_STAT_DISCONNECTED, the status of open endpoints
@@ -314,7 +310,6 @@ transfer requests fail. Endpoints are reactivated by first reinserting the
device and then closing and reopening all endpoints that were open when the
device was disconnected.
.SH CPR (CHECKPOINT/RESUME)
-.sp
.LP
CPR (Checkpoint/Resume) may be initiated at any time and is treated similarly
to a hot-removal. Upon successful suspend and resume, all subsequent transfer
@@ -323,19 +318,17 @@ should close and reopen all endpoints to reinstate them. All endpoint and
device status on Resume (before close and reopen) is USB_LC_STAT_SUSPENDED. A
system suspend will fail while \fBugen\fR is performing a transfer.
.SH DEVICE POWER MANAGEMENT
-.sp
.LP
Devices which support remote wakeup can be power managed when they have no open
logical device nodes. When an application opens the first logical device node
of a device, that application should assume that a reinitialization of device
state is required.
.SH DEVICE STATUS MANAGEMENT
-.sp
.LP
Applications can monitor device status changes by reading the device status
from the device status logical name. When opened without O_NONBLOCK and
-O_NDELAY, all reads from that file descriptor (with the exception of the the
-intial read that follows the open) block until a device status change occurs.
+O_NDELAY, all reads from that file descriptor (with the exception of the
+initial read that follows the open) block until a device status change occurs.
Calls to read will always return immediately if opened with \fBO_NONBLOCK\fR or
\fBO_NDELAY\fR. Nonblocking calls to read which have no data to return, return
no error and zero bytes read.
@@ -425,7 +418,6 @@ device status logical names. Poll indicates when reading a logical name would
return data. See \fBpoll\fR(2) for details. Calls to read may be done whether
or not they follow calls to poll.
.SH ENDPOINT STATUS MANAGEMENT
-.sp
.LP
Each data endpoint has a corresponding status logical name. Use the status
logical name to retrieve the state of the data endpoint, including detail on
@@ -459,7 +451,7 @@ if (ep1_stat_fd < 0) {
data_xfered = write(ep1_data_fd, request, sizeof (request));
-/* An error occured during the data transfer. */
+/* An error occurred during the data transfer. */
if (data_xfered != sizeof (request)) {
/* Read status file descriptor for details on failure. */
@@ -482,7 +474,6 @@ if (data_xfered != sizeof (request)) {
.in -2
.SH CONTROL TRANSFERS
-.sp
.LP
The control endpoint is typically used to set up the device and to query device
status or configuration.
@@ -760,7 +751,6 @@ configuration. For sake of brevity, uninteresting parts are omitted.
.in -2
.SH INTERRUPT-IN TRANSFERS
-.sp
.LP
Applications requiring data from an interrupt-IN endpoint should open the
corresponding logical device name and use \fBread\fR(2), \fBaioread\fR(3C) and
@@ -899,7 +889,6 @@ without O_NONBLOCK or O_NDELAY). Set the new element's event field to POLLIN
like the other elements. Note that only interrupt-IN endpoints and the device
status endpoint can be monitored using \fBpoll\fR(2).
.SH INTERRUPT-OUT TRANSFERS
-.sp
.LP
Applications requiring output on an interrupt-OUT endpoint can open the
corresponding logical device name and perform regular UNIX I/O system calls
@@ -932,7 +921,6 @@ Data can be written to an interrupt-OUT endpoint as follows:
.in -2
.SH BULK TRANSFERS
-.sp
.LP
Applications requiring I/O on a bulk endpoint can open the corresponding
logical device name and perform regular UNIX I/O system calls. For example:
@@ -977,7 +965,6 @@ Data can be read from a bulk-IN endpoint as follows:
.in -2
.SH ISOCHRONOUS TRANSFERS
-.sp
.LP
Applications requiring I/O on an isochronous endpoint can open the
corresponding logical device name and perform regular UNIX I/O system calls
@@ -1244,7 +1231,6 @@ endpoint:
.in -2
.SH ERRORS
-.sp
.LP
The following statuses are returned by endpoint status device logical names:
.sp
@@ -1596,7 +1582,6 @@ No memory for the allocation of internal structures.
.RE
.SH FILES
-.sp
.in +2
.nf
/kernel/drv/ugen 32 bit ELF kernel module (x86 platform only)
@@ -1638,7 +1623,6 @@ No memory for the allocation of internal structures.
where \fIN\fR is an integer representing the instance number of this type of
device. (All logical device names for a single device share the same \fIN\fR.)
.SH ATTRIBUTES
-.sp
.LP
See \fBattributes\fR(5) for descriptions of the following attributes:
.sp
@@ -1654,13 +1638,11 @@ Architecture PCI-based SPARC
.TE
.SH SEE ALSO
-.sp
.LP
\fBlibusb\fR(3LIB), \fBclose\fR(2), \fBpoll\fR(2), \fBread\fR(2),
\fBwrite\fR(2), \fBaioread\fR(3C), \fBaiowrite\fR(3C), \fBusba\fR(7D),
\fBusb_dev_descr\fR(9S).
.SH DIAGNOSTICS
-.sp
.LP
In addition to being logged, the following messages may appear on the system
console. All messages are formatted in the following manner:
@@ -1717,7 +1699,6 @@ to identify the original device with a name string.
.RE
.SH NOTES
-.sp
.LP
\fBugen\fR returns \fB-1\fR for all commands and sets \fBerrno\fR to
\fBENODEV\fR when device has been hot-removed or resumed from a suspend. The
diff --git a/usr/src/man/man7d/usba.7d b/usr/src/man/man7d/usba.7d
index dffea6da91..c917bed146 100644
--- a/usr/src/man/man7d/usba.7d
+++ b/usr/src/man/man7d/usba.7d
@@ -3,11 +3,10 @@
.\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
.\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with
.\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH USBA 7D "Apr 22, 2009"
+.TH USBA 7D "April 9, 2016"
.SH NAME
usba, usb \- Solaris USB Architecture (USBA)
.SH DESCRIPTION
-.sp
.LP
USB provides a low-cost means for attaching peripheral devices, including
mass-storage devices, keyboards, mice, and printers, to a system. For complete
@@ -33,7 +32,6 @@ a complete list of USBA interfaces, see \fBIntro\fR(9F) and \fBIntro\fR(9S).
Devices without a driver may have a \fBlibusb\fR(3LIB) application. For more
information, see \fB/usr/sfw/share/doc/libusb/libusb.txt\fR.
.SH FILES
-.sp
.LP
Listed below are drivers and modules which either utilize or are utilized by
USBA. Drivers in \fB/kernel/drv\fR are 32 bit drivers (x86 only). Drivers in
@@ -91,7 +89,6 @@ kernel/drv/[sparcv9|amd64/]ehci enhanced host controller driver
.sp
.SH ATTRIBUTES
-.sp
.LP
See \fBattributes\fR(5) for a description of the following attributes:
.sp
@@ -107,7 +104,6 @@ Architecture PCI-based systems
.TE
.SH SEE ALSO
-.sp
.LP
\fBcfgadm_usb\fR(1M), \fBlibusb\fR(3LIB), \fBattributes\fR(5), \fBehci\fR(7D),
\fBhid\fR(7D), \fBhubd\fR(7D), \fBohci\fR(7D), \fBscsa2usb\fR(7D),
@@ -131,12 +127,10 @@ Architecture PCI-based systems
.LP
http://www.sun.com
.SH NOTES
-.sp
.LP
Booting from USB mass-storage devices is not supported on SPARC, but is
supported on X86.
.SH DIAGNOSTICS
-.sp
.LP
The messages described below may appear on the system console as well as being
logged. All messages are formatted in the following manner:
@@ -168,7 +162,7 @@ name or the device name.
.ad
.sp .6
.RS 4n
-An internal error occured. Please reboot your system. If this problem
+An internal error occurred. Please reboot your system. If this problem
persists, contact your system vendor.
.RE
diff --git a/usr/src/man/man7d/usbprn.7d b/usr/src/man/man7d/usbprn.7d
index 5fe69f2b4f..017e648cd7 100644
--- a/usr/src/man/man7d/usbprn.7d
+++ b/usr/src/man/man7d/usbprn.7d
@@ -3,7 +3,7 @@
.\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
.\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
.\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH USBPRN 7D "Jun 18, 2005"
+.TH USBPRN 7D "April 9, 2016"
.SH NAME
usbprn \- USB printer class driver
.SH SYNOPSIS
@@ -23,7 +23,6 @@ usbprn@unit-address
.fi
.SH DESCRIPTION
-.sp
.LP
The \fBusbprn\fR driver is a USBA (Solaris USB Architecture) compliant client
driver that supports the \fIUSB Printer Class 1.0\fR specification. The
@@ -43,11 +42,10 @@ additional format conversion packages available in the Solaris distribution.
Configuration of these conversion packages under the Solaris printing system
can be simplified through the use of the \fBprintmgr\fR(1M). This tool allows
selection of printer manufacturer/model information while creating a print
-queue. For USB connected printers, it attempts to pre-select the the
+queue. For USB connected printers, it attempts to pre-select the
manufacturer and model information based on the 1284 device id supplied by the
printer.
.SS "UGEN (Generic USB)"
-.sp
.LP
The \fBusbprn\fR driver also supports a \fBugen\fR(7D) interface allowing raw
access to the device, for example by \fBlibusb\fR(3LIB) applications, by
@@ -55,7 +53,6 @@ passing the drivers bound to each interface. Because a libusb application might
change the state of the device, you should not access the device through the
child interface drivers.
.SH DEFAULT OPERATION
-.sp
.LP
With certain minor exceptions (outlined in the Notes sections below), the
\fBusbprn\fR driver supports a subset of the \fBecpp\fR(7D) ioctl interfaces:
@@ -78,7 +75,6 @@ to their default values with each \fBattach\fR(9E). (The \fBecpp\fR(7D) driver
resets configuration variables with each \fBopen\fR(2).)
.RE
.SH WRITE OPERATION
-.sp
.LP
A \fBwrite\fR(2) operation returns the number of bytes successfully written to
the device. If a failure occurs while a driver is transferring data to printer,
@@ -87,7 +83,6 @@ be retrieved by the application program using the ECPPIOC_GETERR \fBioctl\fR(2)
call. The captured status information is overwritten each time an
ECPPIOC_TESTIO \fBioctl\fR(2) occurs.
.SH IOCTLS
-.sp
.LP
The \fBusbprn\fR driver supports \fBprnio(7I)\fR interfaces. Note that the
\fBPRNIOC_RESET\fR command has no effect on USB printers.
@@ -250,11 +245,9 @@ Unlike \fBecpp\fR(7D), only the ECPP_CENTRONICS mode is currently supported in
.RE
.SH READ OPERATION
-.sp
.LP
The \fBread\fR operation is not supported and returns \fBEIO\fR.
.SH ERRORS
-.sp
.ne 2
.na
\fB\fBEBUSY\fR\fR
@@ -318,7 +311,6 @@ other than ECPP_CENTRONICS in the \fBecpp_transfer_parms\fR structure.
.RE
.SH FILES
-.sp
.ne 2
.na
\fB\fB/kernel/drv/usbprn\fR\fR
@@ -364,7 +356,6 @@ Character special files
.RE
.SH ATTRIBUTES
-.sp
.LP
See \fBattributes\fR(5) for descriptions of the following attributes:
.sp
@@ -380,7 +371,6 @@ Architecture SPARC, x86, PCI-based systems
.TE
.SH SEE ALSO
-.sp
.LP
\fBcfgadm_usb\fR(1M), \fBprintmgr\fR(1M), \fBioctl\fR(2), \fBopen\fR(2),
\fBread\fR(2), \fBwrite\fR(2), \fBlibusb\fR(3LIB), \fBattributes\fR(5),
@@ -402,7 +392,6 @@ Architecture SPARC, x86, PCI-based systems
.LP
http://\fIwww.sun.com/io\fR
.SH DIAGNOSTICS
-.sp
.LP
In addition to being logged, the following messages may appear on the system
console. All messages are formatted in the following manner:
@@ -462,7 +451,6 @@ to the hot-removal may be lost.
.RE
.SH NOTES
-.sp
.LP
The USB printer will be power managed if the device is closed.
.sp
diff --git a/usr/src/man/man7d/zs.7d b/usr/src/man/man7d/zs.7d
index 34c7e95f4f..690935cca8 100644
--- a/usr/src/man/man7d/zs.7d
+++ b/usr/src/man/man7d/zs.7d
@@ -3,7 +3,7 @@
.\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
.\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with
.\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH ZS 7D "Jul 16, 2009"
+.TH ZS 7D "April 9, 2016"
.SH NAME
zs \- Zilog 8530 SCC serial communications driver
.SH SYNOPSIS
@@ -33,7 +33,6 @@ open("/dev/cua/\fIn\fR", \fImode\fR);
.fi
.SH DESCRIPTION
-.sp
.LP
The Zilog 8530 provides two serial input/output channels capable of supporting
a variety of communication protocols. A typical system uses two or more of
@@ -92,7 +91,6 @@ information on parameters that are persistent across reboots, see the
\fBeeprom\fR(1M) man page.
.RE
.SH IOCTLS
-.sp
.LP
The \fBzs\fR module supports the standard set of \fBtermio ioctl\fR(\|) calls.
.sp
@@ -127,7 +125,7 @@ command, respectively. Due to hardware limitations, only the \fBRTS\fR and
.LP
The input and output line speeds may be set to any of the speeds supported by
\fBtermio\fR. The input and output line speeds cannot be set independently; for
-example, when you set the the output speed, the input speed is automatically
+example, when you set the output speed, the input speed is automatically
set to the same speed.
.sp
.LP
@@ -160,7 +158,6 @@ tilde and control-B (CR ~ CTRL-B), but may be changed by the driver. For more
information on breaking (entering the debugger or monitor), see \fBkbd\fR(1)
and \fBkb\fR(7M).
.SH ERRORS
-.sp
.LP
An \fBopen\fR will fail under the following conditions:
.sp
@@ -212,7 +209,6 @@ The open was interrupted by the delivery of a signal.
.RE
.SH FILES
-.sp
.ne 2
.na
\fB\fB/dev/cua/\fR[\fIa-z\fR]\fR
@@ -240,7 +236,6 @@ binary compatibility package device names
.RE
.SH ATTRIBUTES
-.sp
.LP
See \fBattributes\fR(5) for descriptions of the following attributes:
.sp
@@ -256,14 +251,12 @@ Architecture SPARC
.TE
.SH SEE ALSO
-.sp
.LP
\fBeeprom\fR(1M), \fBkadb\fR(1M), \fBtip\fR(1), \fBcu\fR(1C), \fBuucp\fR(1C),
\fBports\fR(1M), \fBpppd\fR(1M), \fBioctl\fR(2), \fBopen\fR(2),
\fBattributes\fR(5), \fBzsh\fR(7D), \fBtermio\fR(7I), \fBkb\fR(7M),
\fBldterm\fR(7M), \fBttcompat\fR(7M)
.SH DIAGNOSTICS
-.sp
.ne 2
.na
\fB\fBzs\fR\fIn\fR\fB\|: silo overflow.\fR\fR
generated by cgit v1.2.3 (git 2.39.1) at 2025-06-01 01:15:50 +0000