From df23d905b96680e56379c5a5ecb4b363f36b9e74 Mon Sep 17 00:00:00 2001 From: Cody Peter Mello Date: Sat, 9 Apr 2016 23:16:53 +0000 Subject: 7041 Fix spelling mistakes in sections 1 and 1M Reviewed by: Marcel Telka Approved by: Dan McDonald --- usr/src/man/man1/audiorecord.1 | 11 ++--------- usr/src/man/man1/cputrack.1 | 2 +- usr/src/man/man1/csh.1 | 39 ++------------------------------------- usr/src/man/man1/elfsign.1 | 2 +- usr/src/man/man1/ldap.1 | 8 ++------ usr/src/man/man1/ldd.1 | 13 ++----------- usr/src/man/man1/lgrpinfo.1 | 12 +++--------- usr/src/man/man1/localedef.1 | 16 ++-------------- usr/src/man/man1/mailcompat.1 | 8 ++------ usr/src/man/man1/mandoc.1 | 4 ++-- usr/src/man/man1/plgrp.1 | 13 ++----------- usr/src/man/man1/pmap.1 | 14 +++----------- usr/src/man/man1/prctl.1 | 2 +- usr/src/man/man1/readonly.1 | 9 ++------- usr/src/man/man1/rwho.1 | 9 ++------- usr/src/man/man1/svcprop.1 | 10 ++-------- 16 files changed, 31 insertions(+), 141 deletions(-) (limited to 'usr/src/man/man1') diff --git a/usr/src/man/man1/audiorecord.1 b/usr/src/man/man1/audiorecord.1 index ba1e0a99ac..185f565c9a 100644 --- a/usr/src/man/man1/audiorecord.1 +++ b/usr/src/man/man1/audiorecord.1 @@ -3,7 +3,7 @@ .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner] -.TH AUDIORECORD 1 "May 5, 2009" +.TH AUDIORECORD 1 "April 9, 2016" .SH NAME audiorecord \- record an audio file .SH SYNOPSIS @@ -15,7 +15,6 @@ audiorecord \- record an audio file .fi .SH DESCRIPTION -.sp .LP The \fBaudiorecord\fR utility copies audio data from the audio device to a named audio file, or to the standard output if no filename is present. If no @@ -38,7 +37,6 @@ example, Control-c) is received. If the \fB-t\fR option is specified, If the audio device is unavailable, that is, if another process currently has read access, \fBaudiorecord\fR prints an error message and exits immediately. .SH OPTIONS -.sp .LP The following options are supported: .sp @@ -165,7 +163,6 @@ set by any process. .RE .SH OPERANDS -.sp .ne 2 .na \fB\fIfile\fR[\fB\&.au\fR|\fB\&.aif\fR[\fBf\fR]]|\fB\&.wav\fR\fR @@ -174,7 +171,7 @@ set by any process. .RS 4n \fIFile Specification\fR: The named audio file is rewritten, or appended. If no filename is present, and standard output is not a tty, or if the special -filename "\fB\(mi\fR" is specified, output is directed to the the standard +filename "\fB\(mi\fR" is specified, output is directed to the standard output. .sp If the \fB-T\fR option is not specified, the file suffix determines the type of @@ -184,12 +181,10 @@ file suffix. .RE .SH USAGE -.sp .LP See \fBlargefile\fR(5) for the description of the behavior of \fBaudiorecord\fR when encountering files greater than or equal to 2 Gbyte ( 2^31 bytes). .SH ENVIRONMENT VARIABLES -.sp .ne 2 .na \fB\fBAUDIODEV\fR\fR @@ -201,7 +196,6 @@ used. .RE .SH ATTRIBUTES -.sp .LP See \fBattributes\fR(5) for descriptions of the following attributes: .sp @@ -219,7 +213,6 @@ Interface Stability Committed .TE .SH SEE ALSO -.sp .LP \fBaudioconvert\fR(1), \fBaudioplay\fR(1), \fBmixerctl\fR(1), \fBattributes\fR(5), \fBlargefile\fR(5), \fBaudio\fR(7I) diff --git a/usr/src/man/man1/cputrack.1 b/usr/src/man/man1/cputrack.1 index d4c3aebb36..24afa6ae21 100644 --- a/usr/src/man/man1/cputrack.1 +++ b/usr/src/man/man1/cputrack.1 @@ -3,7 +3,7 @@ .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License. .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner] -.TH CPUTRACK 1 "Apr 19, 2004" +.TH CPUTRACK 1 "April 9, 2016" .SH NAME cputrack \- monitor process and LWP behavior using CPU performance counters .SH SYNOPSIS diff --git a/usr/src/man/man1/csh.1 b/usr/src/man/man1/csh.1 index 3f6a480a05..0ac366ac46 100644 --- a/usr/src/man/man1/csh.1 +++ b/usr/src/man/man1/csh.1 @@ -4,7 +4,7 @@ .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License. .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner] -.TH CSH 1 "Jul 27, 2007" +.TH CSH 1 "April 9, 2016" .SH NAME csh \- shell command interpreter with a C-like syntax .SH SYNOPSIS @@ -14,7 +14,6 @@ csh \- shell command interpreter with a C-like syntax .fi .SH DESCRIPTION -.sp .LP \fBcsh\fR, the C shell, is a command interpreter with a syntax reminiscent of the C language. It provides a number of convenient features for interactive use @@ -23,7 +22,6 @@ command aliasing, history substitution, job control, and a number of built-in commands. As with the Bourne shell, the C shell provides variable, command and filename substitution. .SS "Initialization and Termination" -.sp .LP When first started, the C shell normally performs commands from the \fB\&.cshrc\fR file in your home directory, provided that it is readable and @@ -46,7 +44,6 @@ As a login shell terminates, it performs commands from the \fB\&.logout\fR file in your home directory; the same permission checks as those for \fB\&.cshrc\fR are applied to this file. .SS "Interactive Operation" -.sp .LP After startup processing is complete, an interactive C shell begins reading commands from the terminal, prompting with \fBhostname\fR\fB%\fR (or @@ -56,14 +53,12 @@ performs the following actions: a line of command input is read and broken into parsed, as described under USAGE. Finally, the shell executes each command in the current line. .SS "Noninteractive Operation" -.sp .LP When running noninteractively, the shell does not prompt for input from the terminal. A noninteractive C shell can execute a command supplied as an \fIargument\fR on its command line, or interpret commands from a file, also known as a script. .SH OPTIONS -.sp .LP The following options are supported: .sp @@ -195,7 +190,6 @@ passed as argument zero, and subsequent arguments are added to the argument list for that command or script. .SH USAGE .SS "Filename Completion" -.sp .LP When enabled by setting the variable \fBfilec\fR, an interactive C shell can complete a partially typed filename or user name. When an unambiguous partial @@ -220,7 +214,6 @@ however, the only possible completion includes a suffix in the list, it is not ignored. \fBfignore\fR does not affect the listing of filenames by the \fBEOF\fR character. .SS "Lexical Structure" -.sp .LP The shell splits input lines into words at space and tab characters, except as noted below. The characters \fB&\fR, \fB|\fR, \fB;\fR, \fB<\fR, \fB>\fR, @@ -245,7 +238,6 @@ When the shell's input is not a terminal, the character \fB#\fR introduces a comment that continues to the end of the input line. Its special meaning is suppressed when preceded by a \fB\e\fR or enclosed in matching quotes. .SS "Command Line Parsing" -.sp .LP A \fIsimple command\fR is composed of a sequence of words. The first word (that is not part of an I/O redirection) specifies the command to be executed. A @@ -271,7 +263,6 @@ by appending an `\fB&\fR\&'; rather than waiting for the sequence to finish before issuing a prompt, the shell displays the job number (see \fBJob Control\fR, below) and associated process IDs and prompts immediately. .SS "History Substitution" -.sp .LP History substitution allows you to use words from previous command lines in the command line you are typing. This simplifies spelling corrections and the @@ -287,7 +278,6 @@ Input lines containing history substitutions are echoed on the terminal after being expanded, but before any other substitutions take place or the command gets executed. .SS "Event Designators" -.sp .LP An event designator is a reference to a command line entry in the history list. .sp @@ -404,7 +394,6 @@ re-executing command #6, .RE .SS "Word Designators" -.sp .LP A `\fB:\fR' (colon) separates the event specification from the word designator. It can be omitted if the word designator begins with a \fB^\fR, \fB$\fR, @@ -504,7 +493,6 @@ Like \fIx*\fR but omitting word \fB$\fR. .RE .SS "Modifiers" -.sp .LP After the optional word designator, you can add one of the following modifiers, preceded by a \fB:\fR. @@ -620,7 +608,6 @@ Without an event specification, a history reference refers either to the previous command, or to a previous history reference on the command line (if any). .SS "Quick Substitution" -.sp .ne 2 .na \fB\fB^\fR\fIl\fR\fB^\fR\fIr\fR\fB^\fR\fR @@ -638,7 +625,6 @@ This is equivalent to the history substitution: .RE .SS "Aliases" -.sp .LP The C shell maintains a list of aliases that you can create, display, and modify using the \fBalias\fR and \fBunalias\fR commands. The shell checks the @@ -671,7 +657,6 @@ Except for the first word, the name of the alias can not appear in its definition, nor in any alias referred to by its definition. Such loops are detected, and cause an error message. .SS "I/O Redirection" -.sp .LP The following metacharacters indicate that the subsequent word is the name of a file to which the command's standard input, standard output, or standard error @@ -729,13 +714,12 @@ forms append both the standard error and standard output to the file. .RE .SS "Variable Substitution" -.sp .LP The C shell maintains a set of variables, each of which is composed of a \fIname\fR and a \fIvalue\fR. A variable name consists of up to 128 letters and digits, and starts with a letter. An underscore (\fB_\fR) is considered a letter). A variable's value is a space-separated list of zero or more words. If -the shell supports a variable name upto 128 characters the variable +the shell supports a variable name up to 128 characters the variable \fBSUNW_VARLEN\fR is defined. If a variable name of up to 128 characters is not supported, then an older version of the shell is being used, and the shell variable name length has a maximum length of 20. @@ -918,7 +902,6 @@ thereafter. It can be used to read from the keyboard in a C shell script. .RE .SS "Command and Filename Substitutions" -.sp .LP Command and filename substitutions are applied selectively to the arguments of built-in commands. Portions of expressions that are not evaluated are not @@ -926,7 +909,6 @@ expanded. For non-built-in commands, filename expansion of the command name is done separately from that of the argument list; expansion occurs in a subshell, after I/O redirection is performed. .SS "Command Substitution" -.sp .LP A command enclosed by backquotes (\|\fB`\fR\|.\|.\|.\|\fB`\fR\|) is performed by a subshell. Its standard output is broken into separate words at each space @@ -936,7 +918,6 @@ newline characters force new words; space and tab characters are preserved. However, a final newline is ignored. It is therefore possible for a command substitution to yield a partial word. .SS "Filename Substitution" -.sp .LP Unquoted words containing any of the characters \fB*\fR, \fB?\fR, \fB[\fR or \fB{\fR, or that begin with ~, are expanded (also known as \fIglobbing\fR) to @@ -1002,7 +983,6 @@ The `\fB\&.\fR' (dot character), when it is the first character in a filename or pathname component, must be matched explicitly. The \fB/\fR (slash) must also be matched explicitly. .SS "Expressions and Operators" -.sp .LP A number of C shell built-in commands accept expressions, in which the operators are similar to those of C and have the same precedence. These @@ -1241,7 +1221,6 @@ of the \fBstatus\fR variable rather than this expression. .RE .SS "Control Flow" -.sp .LP The shell contains a number of commands to regulate the flow of control in scripts and within limits, from the terminal. These commands operate by forcing @@ -1259,7 +1238,6 @@ buffered. The shell performs seeks within the internal buffer to accomplish the rereading implied by the loop. (To the extent that this allows, backward \fBgoto\fR commands succeeds on nonseekable inputs.) .SS "Command Execution" -.sp .LP If the command is a C shell built-in command, the shell executes it directly. Otherwise, the shell searches for a file by that name with execute access. If @@ -1308,7 +1286,6 @@ If the first character of the file is a \fB#\fR, a C shell is invoked. Otherwise, a Bourne shell is invoked. .RE .SS "Signal Handling" -.sp .LP The shell normally ignores \fBQUIT\fR signals. Background jobs are immune to signals generated from the keyboard, including hangups (\fBHUP\fR). Other @@ -1319,7 +1296,6 @@ controlled by the \fBonintr\fR built-in command. Login shells catch the no case are interrupts allowed when a login shell is reading the \fB\&.logout\fR file. .SS "Job Control" -.sp .LP The shell associates a numbered \fIjob\fR with each command sequence to keep track of those commands that are running in the background or have been stopped @@ -1396,7 +1372,6 @@ A job running in the background stops when it attempts to read from the terminal. Background jobs can normally produce output, but this can be suppressed using the `\fBstty tostop\fR' command. .SS "Status Reporting" -.sp .LP While running interactively, the shell tracks the status of each job and reports whenever the job finishes or becomes blocked. It normally displays a @@ -1406,7 +1381,6 @@ the shell is to report status changes immediately. By default, the \fBnotify\fR command marks the current process; after starting a background job, type \fBnotify\fR to mark it. .SS "Commands" -.sp .LP Built-in commands are executed within the C shell. If a built-in command occurs as any component of a pipeline except the last, it is executed in a subshell. @@ -2498,7 +2472,6 @@ decrement \fIname\fR, respectively. .RE .SS "Environment Variables and Predefined Shell Variables" -.sp .LP Unlike the Bourne shell, the C shell maintains a distinction between environment variables, which are automatically exported to processes it @@ -2937,12 +2910,10 @@ Display each command after history substitution takes place. .RE .SS "Large File Behavior" -.sp .LP See \fBlargefile\fR(5) for the description of the behavior of \fBcsh\fR when encountering files greater than or equal to 2 Gbyte (2^31 bytes). .SH FILES -.sp .ne 2 .na \fB\fB~/.cshrc\fR\fR @@ -3006,7 +2977,6 @@ Source of home directories for `~\fIname\fR'. .RE .SH ATTRIBUTES -.sp .LP See \fBattributes\fR(5) for descriptions of the following attributes: .sp @@ -3022,7 +2992,6 @@ CSI Enabled .TE .SH SEE ALSO -.sp .LP \fBbc\fR(1), \fBecho\fR(1), \fBlimit\fR(1), \fBlogin\fR(1), \fBls\fR(1), \fBmore\fR(1), \fBpfcsh\fR(1), \fBpfexec\fR(1), \fBps\fR(1), \fBsh\fR(1), @@ -3031,7 +3000,6 @@ CSI Enabled \fBfork\fR(2), \fBpipe\fR(2), \fBa.out\fR(4), \fBascii\fR(5), \fBattributes\fR(5), \fBenviron\fR(5), \fBlargefile\fR(5), \fBtermio\fR(7I) .SH DIAGNOSTICS -.sp .ne 2 .na \fB\fBYou have stopped jobs.\fR\fR @@ -3042,11 +3010,9 @@ immediate second attempt to exit succeeds, terminating the stopped jobs. .RE .SH WARNINGS -.sp .LP The use of \fBsetuid\fR shell scripts is \fIstrongly\fR discouraged. .SH NOTES -.sp .LP Words can be no longer than 1024 bytes. The system limits argument lists to 1,048,576 bytes. However, the maximum number of arguments to a command for @@ -3161,7 +3127,6 @@ When the shell executes a shell script that attempts to execute a non-existent command interpreter, the shell returns an erroneous diagnostic message that the shell script file does not exist. .SH BUGS -.sp .LP As of this writing, the \fBtime\fR built-in command does \fBnot\fR compute the last 6 fields of output, rendering the output to erroneously report the value diff --git a/usr/src/man/man1/elfsign.1 b/usr/src/man/man1/elfsign.1 index 827601489a..4ff1ba68f9 100644 --- a/usr/src/man/man1/elfsign.1 +++ b/usr/src/man/man1/elfsign.1 @@ -4,7 +4,7 @@ .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License. .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced .\" with your own identifying information: Portions Copyright [yyyy] [name of copyright owner] -.TH ELFSIGN 1 "Jul 7, 2008" +.TH ELFSIGN 1 "April 9, 2016" .SH NAME elfsign \- sign binaries .SH SYNOPSIS diff --git a/usr/src/man/man1/ldap.1 b/usr/src/man/man1/ldap.1 index febdc2a95c..d1660e5fa7 100644 --- a/usr/src/man/man1/ldap.1 +++ b/usr/src/man/man1/ldap.1 @@ -4,11 +4,10 @@ .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License. .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner] -.TH LDAP 1 "Aug 28, 2006" +.TH LDAP 1 "April 9, 2016" .SH NAME ldap \- LDAP as a naming repository .SH DESCRIPTION -.sp .LP LDAP refers to Lightweight Directory Access Protocol, which is an industry standard for accessing directory servers. By initializing the client using @@ -202,7 +201,7 @@ More protection can be provided by means of access control, allowing the server to grant access for certain containers or entries. Access control is specified by Access Control Lists (ACLs) that are defined and stored in the LDAP server. The Access Control Lists on the LDAP server are called Access Control -Instructions (ACIs) by the the SunOne Directory Server. Each ACL or ACI +Instructions (ACIs) by the SunOne Directory Server. Each ACL or ACI specifies one or more directory objects, for example, the \fBcn\fR attribute in a specific container, one or more clients to whom you grant or deny access, and one or more access rights that determine what the clients can do to or with the @@ -257,7 +256,6 @@ Lists the contents of the LDAP naming space. .RE .SH FILES -.sp .ne 2 .na \fB\fB/var/ldap/ldap_client_cred\fR\fR @@ -301,7 +299,6 @@ PAM framework configuration file. .RE .SH SEE ALSO -.sp .LP \fBldaplist\fR(1), \fBidsconfig\fR(1M), \fBldap_cachemgr\fR(1M), \fBldapaddent\fR(1M), \fBldapclient\fR(1M), \fBnsswitch.conf\fR(4), @@ -314,7 +311,6 @@ PAM framework configuration file. \fISystem Administration Guide: Naming and Directory Services (DNS, NIS, and LDAP)\fR .SH NOTES -.sp .LP The \fBpam_unix\fR(5) module is no longer supported. Similar functionality is provided by \fBpam_authtok_check\fR(5), \fBpam_authtok_get\fR(5), diff --git a/usr/src/man/man1/ldd.1 b/usr/src/man/man1/ldd.1 index ff612c494f..cdc949911f 100644 --- a/usr/src/man/man1/ldd.1 +++ b/usr/src/man/man1/ldd.1 @@ -4,7 +4,7 @@ .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License. .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner] -.TH LDD 1 "Jun 3, 2008" +.TH LDD 1 "April 9, 2016" .SH NAME ldd \- list dynamic dependencies of executable files or shared objects .SH SYNOPSIS @@ -15,7 +15,6 @@ ldd \- list dynamic dependencies of executable files or shared objects .fi .SH DESCRIPTION -.sp .LP The \fBldd\fR utility lists the dynamic dependencies of executable files or shared objects. \fBldd\fR uses the runtime linker, \fBld.so.1\fR, to generate @@ -57,7 +56,6 @@ Therefore, \fBldd\fR does not list any shared objects explicitly attached using \fBdlopen\fR(3C). To display all the objects in use by a process, or a core file, use \fBpldd\fR(1). .SH OPTIONS -.sp .LP \fBldd\fR can also check the compatibility of \fIfilename\fR with the shared objects \fIfilename\fR uses. With the following options, \fBldd\fR prints @@ -315,12 +313,11 @@ This option also displays any dependency version requirements. See .SH USAGE .SS "Security" -.sp .LP A superuser should use the \fB-f\fR option only if the executable to be examined is known to be trustworthy. The use of \fB-f\fR on an untrustworthy executable while superuser can compromise system security. If an executables -trustworthyness is unknown, a superuser should temporarily become a regular +trustworthiness is unknown, a superuser should temporarily become a regular user. Then invoke \fBldd\fR as this regular user. .sp .LP @@ -331,7 +328,6 @@ non-superuser can use either the \fB:r\fR subcommand of \fBmdb\fR, or compromise. To minimize risk when using \fBldd\fR, \fBadb :r\fR, or \fBtruss\fR on an untrustworthy executable, use the \fBUID\fR \fB"nobody"\fR. .SS "Lazy Loading" -.sp .LP Lazy loading can be applied directly by specified lazy dependencies. See the \fB-z\fR \fBlazyload\fR option of \fBld\fR(1). Lazy loading can also be applied @@ -386,7 +382,6 @@ any references. These objects, in this example, \fBlibnsl.so.1\fR, are candidates for removal from the link-line used to build the object being inspected. .SS "Initialization Order" -.sp .LP Objects that do not explicitly define their required dependencies might observe variations in the initialization section order displayed by \fBldd\fR due to @@ -445,7 +440,6 @@ order for these dependencies can not be established. Users that prefer a more static analysis of object files can inspect dependencies using tools such as \fBdump\fR(1) and \fBelfdump\fR(1). .SH FILES -.sp .ne 2 .na \fB\fB/usr/lib/lddstub\fR\fR @@ -464,7 +458,6 @@ Fake 64-bit executable loaded to check the dependencies of shared objects. .RE .SH SEE ALSO -.sp .LP \fBcrle\fR(1), \fBdump\fR(1), \fBelfdump\fR(1), \fBlari\fR(1), \fBld\fR(1), \fBld.so.1\fR(1), \fBmdb\fR(1), \fBpldd\fR(1), \fBpvs\fR(1), \fBtruss\fR(1), @@ -473,7 +466,6 @@ Fake 64-bit executable loaded to check the dependencies of shared objects. .LP \fILinker and Libraries Guide\fR .SH DIAGNOSTICS -.sp .LP \fBldd\fR prints the record of shared object path names to \fBstdout\fR. The optional list of symbol resolution problems is printed to \fBstderr\fR. If @@ -481,7 +473,6 @@ optional list of symbol resolution problems is printed to \fBstderr\fR. If \fIfilename\fR cannot be opened for reading, a non-zero exit status is returned. .SH NOTES -.sp .LP Use of the \fB-d\fR or \fB-r\fR option with shared objects can give misleading results. \fBldd\fR does a worst case analysis of the shared objects. However, diff --git a/usr/src/man/man1/lgrpinfo.1 b/usr/src/man/man1/lgrpinfo.1 index 294db80a0e..17ce8e35ff 100644 --- a/usr/src/man/man1/lgrpinfo.1 +++ b/usr/src/man/man1/lgrpinfo.1 @@ -3,7 +3,7 @@ .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License. .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner] -.TH LGRPINFO 1 "Sep 11, 2006" +.TH LGRPINFO 1 "April 9, 2016" .SH NAME lgrpinfo \- display information about locality groups .SH SYNOPSIS @@ -28,7 +28,6 @@ lgrpinfo \- display information about locality groups .fi .SH DESCRIPTION -.sp .LP \fBlgrpinfo\fR prints information about the locality group (\fBlgroup\fR) hierarchy and its contents. @@ -70,7 +69,6 @@ lgroup. lgroups can be specified on the command line as lgroup IDs or by using specific keywords. See \fBOPERANDS\fR. .SH OPTIONS -.sp .LP You can combine options together and the order in which options are specified is not important. Lowercase options select what information should be printed @@ -221,7 +219,7 @@ Print memory information. Memory sizes are scaled to the unit of measure that yields an integer from \fB0\fR to \fB1023\fR unless the \fB-u\fR option is specified as well. The fractional part of the number is only displayed for values less than \fB10\fR. -This behavior is similiar to using the \fB-h\fR option of \fBls\fR(1) or +This behavior is similar to using the \fB-h\fR option of \fBls\fR(1) or \fBdf\fR(1M) to display a human readable format. .sp This is the default. @@ -287,12 +285,11 @@ is printed for the \fBroot\fR lgroup unless it is the only lgroup. Specify memory units. Units should be b, k, m, g, t, p, or e for bytes, kilobytes, megabytes, gigabytes, terabytes, petabytes, or exabytes respectively. The fractional part of the number is only displayed for values -less than 10. This behavior is similiar to using the \fB-h\fR option of +less than 10. This behavior is similar to using the \fB-h\fR option of \fBls\fR(1) or \fBdf\fR(1M) to display a human readable format. .RE .SH OPERANDS -.sp .LP The following operands are supported: .sp @@ -504,7 +501,6 @@ The following example prints information about lgroup latencies: .sp .SH EXIT STATUS -.sp .LP The following exit values are returned: .sp @@ -544,7 +540,6 @@ Invalid syntax. .RE .SH ATTRIBUTES -.sp .LP See \fBattributes\fR(5) for descriptions of the following attributes: .sp @@ -563,7 +558,6 @@ Interface Stability See below. .LP The human readable output is Unstable. .SH SEE ALSO -.sp .LP \fBls\fR(1), \fBplgrp\fR(1), \fBpmap\fR(1), \fBproc\fR(1), \fBps\fR(1), \fBdf\fR(1M), \fBprstat\fR(1M), \fBlgrp_init\fR(3LGRP), \fBliblgrp\fR(3LIB), diff --git a/usr/src/man/man1/localedef.1 b/usr/src/man/man1/localedef.1 index f7962baaf2..e19cd325d6 100644 --- a/usr/src/man/man1/localedef.1 +++ b/usr/src/man/man1/localedef.1 @@ -31,7 +31,7 @@ .\" add the following below this CDDL HEADER, with the fields enclosed by .\" brackets "[]" replaced with your own identifying information: .\" Portions Copyright [yyyy] [name of copyright owner] -.TH LOCALEDEF 1 "Aug 24, 2013" +.TH LOCALEDEF 1 "April 9, 2016" .SH NAME localedef \- define locale environment .SH SYNOPSIS @@ -43,7 +43,6 @@ localedef \- define locale environment .fi .SH DESCRIPTION -.sp .LP The \fBlocaledef\fR utility converts source definitions for locale categories into a format usable by the functions and utilities whose operational behavior @@ -115,7 +114,6 @@ Defines the format and values of affirmative and negative responses. .RE .SH OPTIONS -.sp .LP The following options are supported: .sp @@ -142,7 +140,7 @@ Emit verbose debugging output on standard output. \fB\fB-U\fR\fR .ad .RS 23n -Ignore the presence of character symbols that have no maching character +Ignore the presence of character symbols that have no matching character definition. This facilitates the use of a common locale definition file to be used across multiple encodings, even when some symbols are not present in a given encoding. @@ -200,7 +198,6 @@ ISO/IEC 10646-1: 2000 standard position constant values. See NOTES. .RE .SH OPERANDS -.sp .LP The following operand is supported: .sp @@ -218,7 +215,6 @@ belonging to the same locale can be processed.) .RE .SH OUTPUT -.sp .LP \fBlocaledef\fR creates a directory of files that represents the locale's data. The contants of this directory should generally be copied into the @@ -226,13 +222,11 @@ appropriate subdirectory of /usr/lib/locale in order the definitions to be visible to programs linked with libc. .sp .SH ENVIRONMENT VARIABLES -.sp .LP See \fBenviron\fR(5) for definitions of the following environment variables that affect the execution of \fBlocaledef\fR: \fBLANG\fR, \fBLC_ALL\fR, \fBLC_COLLATE\fR, \fBLC_CTYPE\fR, \fBLC_MESSAGES\fR, and \fBNLSPATH\fR. .SH EXIT STATUS -.sp .LP The following exit values are returned: .sp @@ -277,8 +271,6 @@ Warnings or errors occurred and no output was created. .LP If an error is detected, no permanent output will be created. .SH FILES - -.sp .ne 2 .na \fB\fB/usr/lib/locale/\fIlocalename\fR/ @@ -289,7 +281,6 @@ The directory containing locale data. .RE .SH ATTRIBUTES -.sp .LP See \fBattributes\fR(5) for descriptions of the following attributes: .sp @@ -305,13 +296,11 @@ Interface Stability Standard .TE .SH SEE ALSO -.sp .LP \fBlocale\fR(1), \fBiconv_open\fR(3C), \fBnl_langinfo\fR(3C), \fBstrftime\fR(3C), \fBattributes\fR(5), \fBcharmap\fR(5), \fBenviron\fR(5), \fBextensions\fR(5), \fBlocale\fR(5), \fBstandards\fR(5) .SH WARNINGS -.sp .LP If warnings occur, permanent output will be created if the \fB-c\fR option was specified. The following conditions will cause warning messages to be issued: @@ -331,7 +320,6 @@ If optional keywords not supported by the implementation are present in the source. .RE .SH NOTES -.sp .LP When the \fB-u\fR option is used, the \fIcode_set_name\fR option-argument is interpreted as a name of a codeset to which the ISO/IEC 10646-1: 2000 standard diff --git a/usr/src/man/man1/mailcompat.1 b/usr/src/man/man1/mailcompat.1 index f27569af75..5cd96ca8b1 100644 --- a/usr/src/man/man1/mailcompat.1 +++ b/usr/src/man/man1/mailcompat.1 @@ -3,13 +3,12 @@ .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License. .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner] -.TH MAILCOMPAT 1 "Aug 4, 1994" +.TH MAILCOMPAT 1 "April 9, 2016" .SH NAME mailcompat \- provide SunOS compatibility for Solaris mailbox format .SH DESCRIPTION -.sp .LP -\fBmailcompat\fR is a program to provide SunOS 4.\fIx\fR compatability for the +\fBmailcompat\fR is a program to provide SunOS 4.\fIx\fR compatibility for the Solaris mailbox format. You would typically run \fBmailcompat\fR to be able to read mail on a workstation running SunOS 4.\fIx\fR when your mail server is running Solaris. @@ -25,7 +24,6 @@ To execute \fBmailcompat\fR, log onto the Solaris mail server and enter \fBmailcompat\fR on the command line. Answer the queries provided by the program. .SH USAGE -.sp .LP See \fBlargefile\fR(5) for the description of the behavior of \fBmailcompat\fR when encountering files greater than or equal to 2 Gbyte ( 2^31 bytes). @@ -71,7 +69,6 @@ example% .sp .SH FILES -.sp .ne 2 .na \fB\fB~/.forward\fR\fR @@ -81,6 +78,5 @@ list of recipients for forwarding messages .RE .SH SEE ALSO -.sp .LP \fBmailx\fR(1), \fBattributes\fR(5), \fBlargefile\fR(5) diff --git a/usr/src/man/man1/mandoc.1 b/usr/src/man/man1/mandoc.1 index c60353d2e0..9654a08bd0 100644 --- a/usr/src/man/man1/mandoc.1 +++ b/usr/src/man/man1/mandoc.1 @@ -15,7 +15,7 @@ .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" -.Dd $Mdocdate: February 23 2015 $ +.Dd $Mdocdate: April 9 2016 $ .Dt MANDOC 1 .Os .Sh NAME @@ -769,7 +769,7 @@ In the SEE ALSO section, an macro with a lower section number follows one with a higher number, or two .Ic \&Xr -macros refering to the same section are out of alphabetical order. +macros referring to the same section are out of alphabetical order. .It Sy "unusual Xr punctuation" .Pq mdoc In the SEE ALSO section, punctuation between two diff --git a/usr/src/man/man1/plgrp.1 b/usr/src/man/man1/plgrp.1 index 95dd491b44..916e2d4908 100644 --- a/usr/src/man/man1/plgrp.1 +++ b/usr/src/man/man1/plgrp.1 @@ -3,7 +3,7 @@ .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License. .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner] -.TH PLGRP 1 "Sep 8, 2006" +.TH PLGRP 1 "April 9, 2016" .SH NAME plgrp \- observe and affect home lgroup and lgroup affinities of threads .SH SYNOPSIS @@ -29,7 +29,6 @@ plgrp \- observe and affect home lgroup and lgroup affinities of threads .fi .SH DESCRIPTION -.sp .LP \fBplgrp\fR displays or sets the home \fBlgroup\fR and \fBlgroup\fR affinities for one or more processes, threads, or LWPs. @@ -62,7 +61,6 @@ The different levels of lgroup affinities and their semantics are fully described in \fBlgrp_affinity_set\fR(3LGRP). .SH USAGE .SS "Specifying lgroups" -.sp .LP \fIlgroup_list\fR is a comma separated list of one or more of the following: .sp @@ -85,10 +83,9 @@ keyword represents the ID of the root \fBlgroup\fR. The \fBleaves\fR keyword represents the IDs of all \fBleaf\fR \fBlgroups\fR, that is, lgroups which do not have any children. .SS "Specifying Processes and Threads" -.sp .LP \fBplgrp\fR takes one or more space separated processes or threads as -arguments. Processes and threads can be specified in a manner similiar to the +arguments. Processes and threads can be specified in a manner similar to the \fBproc\fR(1) tools. A process ID may be specified as an integer \fIpid\fR or \fB/proc/\fR\fIpid\fR. Shell expansions can be used to specify processes when \fB/proc/\fR\fIpid\fR is used. For example, \fB/proc/*\fR can be used to @@ -102,7 +99,6 @@ selected at once by using the hyphen (\fB-\fR) and comma(\fB,\fR). For example, \fIpid\fR\fB/1,2,7-9\fR specifies threads 1, 2, 7, 8, and 9 of the process with \fIpid\fR as its process ID. .SH OPTIONS -.sp .LP The following options are supported: .sp @@ -172,7 +168,6 @@ to the \fBlgroups\fR in a round robin fashion. .RE .SH OPERANDS -.sp .LP The following operands are supported: .sp @@ -270,7 +265,6 @@ PID/LWPID HOME AFFINITY .sp .SH EXIT STATUS -.sp .LP The following exit values are returned: .sp @@ -301,7 +295,6 @@ Non-fatal error or interrupt. Something might have changed. .RE .SH ATTRIBUTES -.sp .LP See \fBattributes\fR(5) for descriptions of the following attributes: .sp @@ -320,14 +313,12 @@ Interface Stability See below. .LP The command syntax is Unstable. The output formats are Unstable. .SH SEE ALSO -.sp .LP \fBlgrpinfo\fR(1), \fBmadv.so.1\fR(1), \fBpmadvise\fR(1), \fBpmap\fR(1), \fBproc\fR(1), \fBps\fR(1), \fBprstat\fR(1M), \fBlgrp_affinity_get\fR(3LGRP), \fBlgrp_affinity_set\fR(3LGRP), \fBlgrp_home\fR(3LGRP), \fBliblgrp\fR(3LIB), \fBproc\fR(4), \fBattributes\fR(5) .SH WARNINGS -.sp .LP Like the \fBproc\fR(1) tools, the \fBplgrp\fR utility stops its target processes while inspecting them and reports the results when invoked with any diff --git a/usr/src/man/man1/pmap.1 b/usr/src/man/man1/pmap.1 index 5f2c360872..d65ae166f1 100644 --- a/usr/src/man/man1/pmap.1 +++ b/usr/src/man/man1/pmap.1 @@ -3,7 +3,7 @@ .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License. .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner] -.TH PMAP 1 "Sep 9, 2006" +.TH PMAP 1 "April 9, 2016" .SH NAME pmap \- display information about the address space of a process .SH SYNOPSIS @@ -28,11 +28,9 @@ pmap \- display information about the address space of a process .fi .SH DESCRIPTION -.sp .LP The \fBpmap\fR utility prints information about the address space of a process. .SH OPTIONS -.sp .LP The following options are supported: .sp @@ -172,7 +170,6 @@ Displays additional information per mapping. See USAGE for more information. .RE .SH USAGE -.sp .LP The \fBpmap\fR utility prints information about the address space of a process. .sp @@ -279,7 +276,6 @@ assured only if the primary controlling process, typically a debugger, has stopped the victim process and the primary controlling process is doing nothing at the moment of application of the \fBproc\fR tool in question. .SH DISPLAY FORMATS -.sp .LP One line of output is printed for each mapping within the process, unless the -\fB-s\fR or -\fB-L\fR option is specified. With \fB-s\fR option, one line is @@ -743,8 +739,8 @@ total Kb 50464 42264 18888 16384 .sp .LP The \fB-s\fR option can be used to display the hardware translation page sizes -for each portion of the address space. (See \fBmemcntl\fR(2) for futher -information on Solaris multiple page size support). +for each portion of the address space. (See \fBmemcntl\fR(2) for further +information on illumos multiple page size support). .sp .LP @@ -943,7 +939,6 @@ FFBFE000 8K rw--- 2 [ stack ] .sp .SH EXIT STATUS -.sp .LP The following exit values are returned: .sp @@ -965,7 +960,6 @@ An error has occurred. .RE .SH FILES -.sp .ne 2 .na \fB\fB/proc/*\fR\fR @@ -984,7 +978,6 @@ process files .RE .SH ATTRIBUTES -.sp .LP See \fBattributes\fR(5) for descriptions of the following attributes: .sp @@ -1004,7 +997,6 @@ Interface Stability See below. The command syntax is Evolving. The \fB-L\fR option and the output formats are Unstable. .SH SEE ALSO -.sp .LP \fBldd\fR(1), \fBlgrpinfo\fR(1), \fBmadv.so.1\fR(1), \fBmdb\fR(1), \fBplgrp\fR(1), \fBpmadvise\fR(1), \fBproc\fR(1), \fBps\fR(1), diff --git a/usr/src/man/man1/prctl.1 b/usr/src/man/man1/prctl.1 index db13fb2448..3f1f19fa2a 100644 --- a/usr/src/man/man1/prctl.1 +++ b/usr/src/man/man1/prctl.1 @@ -3,7 +3,7 @@ .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner] -.TH PRCTL 1 "Oct 30, 2013" +.TH PRCTL 1 "April 9, 2016" .SH NAME prctl \- get or set the resource controls of running processes, tasks, and projects diff --git a/usr/src/man/man1/readonly.1 b/usr/src/man/man1/readonly.1 index 40f6f7c0a5..0cadf2bbee 100644 --- a/usr/src/man/man1/readonly.1 +++ b/usr/src/man/man1/readonly.1 @@ -5,7 +5,7 @@ .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License. .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner] -.TH READONLY 1 "Nov 2, 2007" +.TH READONLY 1 "April 9, 2016" .SH NAME readonly \- shell built-in function to protect the value of the given variable from reassignment @@ -35,13 +35,11 @@ from reassignment .SH DESCRIPTION .SS "sh" -.sp .LP -The given \fIname\fRs are marked \fBreadonly\fR and the values of the these +The given \fIname\fRs are marked \fBreadonly\fR and the values of these \fIname\fRs may not be changed by subsequent assignment. If no arguments are given, a list of all \fBreadonly\fR names is printed. .SS "ksh" -.sp .LP The given \fIname\fRs are marked \fBreadonly\fR and these names cannot be changed by subsequent assignment. @@ -118,7 +116,6 @@ This means that tilde substitution is performed after the \fB=\fR sign and word splitting and file name generation are not performed. .RE .SS "ksh93" -.sp .LP \fBreadonly\fR sets the \fBreadonly\fR attribute on each of the variables specified by name which prevents their values from being changed. If @@ -178,7 +175,6 @@ field splitting and file name generation are not performed. .RE .SH EXIT STATUS .SS "ksh93" -.sp .LP The following exit values are returned: .sp @@ -200,7 +196,6 @@ An error occurred. .RE .SH SEE ALSO -.sp .LP \fBksh\fR(1), \fBksh93\fR(1), \fBsh\fR(1), \fBtypeset\fR(1), \fBattributes\fR(5) diff --git a/usr/src/man/man1/rwho.1 b/usr/src/man/man1/rwho.1 index 4137b0491d..b5cb2ecb51 100644 --- a/usr/src/man/man1/rwho.1 +++ b/usr/src/man/man1/rwho.1 @@ -3,7 +3,7 @@ .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License. .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner] -.TH RWHO 1 "Nov 6, 2000" +.TH RWHO 1 "April 9, 2016" .SH NAME rwho \- who is logged in on local machines .SH SYNOPSIS @@ -13,7 +13,6 @@ rwho \- who is logged in on local machines .fi .SH DESCRIPTION -.sp .LP The \fBrwho\fR command produces output similar to \fBwho\fR(1), but for all machines on your network. If no report has been received from a machine for 5 @@ -26,7 +25,6 @@ this idle time. If a user has not typed to the system for an hour or more, the user is omitted from the output of \fBrwho\fR unless the \fB-a\fR flag is given. .SH OPTIONS -.sp .ne 2 .na \fB\fB-a\fR\fR @@ -36,7 +34,6 @@ Report all users whether or not they have typed to the system in the past hour. .RE .SH FILES -.sp .ne 2 .na \fB\fB/var/spool/rwho/whod.*\fR\fR @@ -46,12 +43,10 @@ information about other machines .RE .SH SEE ALSO -.sp .LP \fBfinger\fR(1), \fBruptime\fR(1), \fBwho\fR(1), \fBin.rwhod\fR(1M), \fBattributes\fR(5) .SH NOTES -.sp .LP \fBrwho\fR does not work through gateways. .sp @@ -60,7 +55,7 @@ The directory \fB/var/spool/rwho\fR must exist on the host from which \fBrwho\fR is run. .sp .LP -This service takes up progressively more network bandwith as the number of +This service takes up progressively more network bandwidth as the number of hosts on the local net increases. For large networks, the cost becomes prohibitive. .sp diff --git a/usr/src/man/man1/svcprop.1 b/usr/src/man/man1/svcprop.1 index a1be45b9fa..e4eaba64a2 100644 --- a/usr/src/man/man1/svcprop.1 +++ b/usr/src/man/man1/svcprop.1 @@ -3,7 +3,7 @@ .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License. .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner] -.TH SVCPROP 1 "Sep 13, 2007" +.TH SVCPROP 1 "April 9, 2016" .SH NAME svcprop \- retrieve values of service configuration properties .SH SYNOPSIS @@ -20,7 +20,6 @@ svcprop \- retrieve values of service configuration properties .fi .SH DESCRIPTION -.sp .LP The \fBsvcprop\fR utility prints values of properties in the service configuration repository. Properties are selected by \fB-p\fR options and the @@ -36,7 +35,6 @@ instance's directly attached properties. See \fBsmf\fR(5) for an explanation of property composition. If the \fBrunning\fR snapshot does not exist then the instance's directly attached properties are used instead. .SS "Output Format" -.sp .LP By default, when a single property is selected, the values for each are printed on separate lines. Empty \fBASCII\fR string values are represented by a pair of @@ -64,7 +62,6 @@ due to access controls, an error results. .LP Error messages are printed to the standard error stream. .SH OPTIONS -.sp .LP The following options are supported: .sp @@ -177,7 +174,6 @@ Uses properties from the service or instance in the specified \fIzone\fR. This option is only applicable from the global zone, see \fBzones\fR(5). .SH OPERANDS -.sp .LP The following operands are supported: .sp @@ -294,7 +290,7 @@ general/single_instance boolean true .sp .LP -\fBExample 4 \fRTesting the Existance of a Property +\fBExample 4 \fRTesting the Existence of a Property .sp .LP The following example tests the existence of the \fBgeneral/enabled\fR property @@ -371,7 +367,6 @@ svcprop -p $1 $2 | ( .sp .SH EXIT STATUS -.sp .LP The following exit values are returned: .sp @@ -402,7 +397,6 @@ Invalid command line options were specified. .RE .SH SEE ALSO -.sp .LP \fBsvcs\fR(1), \fBinetd\fR(1M), \fBsvcadm\fR(1M), \fBsvccfg\fR(1M), \fBsvc.startd\fR(1M), \fBservice_bundle\fR(4), \fBattributes\fR(5), -- cgit v1.2.3 From 1b2031a95889aea96be6af55dcf31a0d5ffdfed9 Mon Sep 17 00:00:00 2001 From: Cody Peter Mello Date: Sun, 10 Apr 2016 01:32:26 +0000 Subject: 7050 Prefer 'subcommand' over 'sub-command' in the manual pages Reviewed by: Robert Mustacchi Approved by: Dan McDonald --- usr/src/man/man1/elfsign.1 | 9 +-------- usr/src/man/man1m/flowadm.1m | 3 +-- usr/src/man/man1m/itadm.1m | 2 +- usr/src/man/man1m/ndmpadm.1m | 2 +- usr/src/man/man1m/route.1m | 27 ++++++++------------------- usr/src/man/man1m/sasinfo.1m | 7 +------ usr/src/man/man1m/sbdadm.1m | 8 +------- usr/src/man/man1m/smbadm.1m | 4 ++-- usr/src/man/man1m/smtnrhdb.1m | 13 +------------ usr/src/man/man1m/tpmadm.1m | 7 +------ usr/src/tools/onbld/Checks/SpellCheck.py | 2 ++ 11 files changed, 20 insertions(+), 64 deletions(-) (limited to 'usr/src/man/man1') diff --git a/usr/src/man/man1/elfsign.1 b/usr/src/man/man1/elfsign.1 index 4ff1ba68f9..993909053d 100644 --- a/usr/src/man/man1/elfsign.1 +++ b/usr/src/man/man1/elfsign.1 @@ -43,7 +43,6 @@ elfsign \- sign binaries .fi .SH DESCRIPTION -.sp .ne 2 .na \fB\fBlist\fR\fR @@ -94,7 +93,6 @@ an appropriate certificate in \fB/etc/crypto/certs\fR if \fB-c\fR is not given. .RE .SH OPTIONS -.sp .LP The following options are supported: .sp @@ -291,7 +289,6 @@ is not stable parseable output. .RE .SH OPERANDS -.sp .LP The following operand is supported: .sp @@ -381,7 +378,6 @@ CN=VENDOR, OU=Software Development, O=Vendor Inc. .sp .SH EXIT STATUS -.sp .LP The following exit values are returned: .sp @@ -390,7 +386,7 @@ The following exit values are returned: .TS c c c l l l . -VALUE MEANING SUB-COMMAND +VALUE MEANING SUBCOMMAND \fB0\fR Operation successful sign/verify/request \fB1\fR Invalid arguments \fB2\fR Failed to verify ELF object verify @@ -406,7 +402,6 @@ T} verify .TE .SH FILES -.sp .ne 2 .na \fB\fB/etc/crypto/certs\fR\fR @@ -417,7 +412,6 @@ used .RE .SH ATTRIBUTES -.sp .LP See \fBattributes\fR(5) for descriptions of the following attributes: .sp @@ -438,7 +432,6 @@ The \fBelfsign\fR command and subcommands are Committed. While applications should not depend on the output format of \fBelfsign\fR, the output format of the \fBlist\fR subcommand is Committed. .SH SEE ALSO -.sp .LP \fBdate\fR(1), \fBpktool\fR(1), \fBcryptoadm\fR(1M), \fBlibpkcs11\fR(3LIB), \fBattributes\fR(5) diff --git a/usr/src/man/man1m/flowadm.1m b/usr/src/man/man1m/flowadm.1m index fdc8151b41..605833c0ef 100644 --- a/usr/src/man/man1m/flowadm.1m +++ b/usr/src/man/man1m/flowadm.1m @@ -70,8 +70,7 @@ traffic for more observable and deterministic behavior. .LP \fBflowadm\fR is implemented as a set of subcommands with corresponding options. Options are described in the context of each subcommand. -.SH SUB-COMMANDS -.sp +.SH SUBCOMMANDS .LP The following subcommands are supported: .sp diff --git a/usr/src/man/man1m/itadm.1m b/usr/src/man/man1m/itadm.1m index bd815625b7..f57fe25f24 100644 --- a/usr/src/man/man1m/itadm.1m +++ b/usr/src/man/man1m/itadm.1m @@ -163,7 +163,7 @@ example specifications. .in -2 .sp -.SH SUB-COMMANDS +.SH SUBCOMMANDS .LP The following are the \fBitadm\fR subcommands with their options. .SS "\fBitadm create-target\fR" diff --git a/usr/src/man/man1m/ndmpadm.1m b/usr/src/man/man1m/ndmpadm.1m index 680c9fdd23..04c3947f4d 100644 --- a/usr/src/man/man1m/ndmpadm.1m +++ b/usr/src/man/man1m/ndmpadm.1m @@ -107,7 +107,7 @@ The following option is supported: Display a list of all subcommands and options. .RE -.SH SUB-COMMANDS +.SH SUBCOMMANDS .LP The \fBndmpadm\fR command supports the subcommands described below. .SS "\fBdisable\fR Subcommand" diff --git a/usr/src/man/man1m/route.1m b/usr/src/man/man1m/route.1m index 9e03c507af..60cbf3f1ae 100644 --- a/usr/src/man/man1m/route.1m +++ b/usr/src/man/man1m/route.1m @@ -40,7 +40,6 @@ route \- manually manipulate the routing tables .fi .SH DESCRIPTION -.sp .LP \fBroute\fR manually manipulates the network routing tables. These tables are normally maintained by the system routing daemon, such as \fBin.routed\fR(1M) @@ -57,15 +56,14 @@ of the programmatic interface discussed in \fBroute\fR(7P). can modify routing tables, the \fBRTM_GET\fR operation is allowed for non-privileged users. .SH OPTIONS -.sp .ne 2 .na \fB\fB-f\fR\fR .ad .RS 15n Flush the routing tables of all gateway entries. If you use the \fB-f\fR option -in conjunction with any of the \fBroute\fR sub-commands, \fBroute\fR flushes -the gateways before performing the sub-command. Specify the table to flush by +in conjunction with any of the \fBroute\fR subcommands, \fBroute\fR flushes +the gateways before performing the subcommand. Specify the table to flush by placing the \fBinet\fR or \fBinet6\fR modifier immediately after the \fB-f\fR option. If unspecified, flushing IPv4 (\fBinet\fR) routes is the default. .RE @@ -131,7 +129,6 @@ Print additional details in verbose mode. .RE .SS "Subcommands" -.sp .LP The following subcommands are supported: .sp @@ -201,7 +198,7 @@ conjunction with the \fB-p\fR option. .sp .LP -The \fBadd\fR and \fBdelete\fR sub-commands have the following syntax: +The \fBadd\fR and \fBdelete\fR subcommands have the following syntax: .sp .in +2 .nf @@ -218,7 +215,7 @@ through which packets should be routed. Modifiers described in \fBOPERANDS\fR can be placed anywhere on the command line. .sp .LP -The \fBget\fR and \fBchange\fR sub-commands have the following syntax: +The \fBget\fR and \fBchange\fR subcommands have the following syntax: .sp .in +2 .nf @@ -235,7 +232,7 @@ through which packets should be routed. Modifiers described in \fBOPERANDS\fR can be placed anywhere on the command line. .sp .LP -The \fBmonitor\fR sub-command has the following syntax: +The \fBmonitor\fR subcommand has the following syntax: .sp .in +2 .nf @@ -245,12 +242,10 @@ route monitor [ -inet | -inet6 ] .sp .SH OPERANDS -.sp .LP -\fBroute\fR executes its sub-commands on routes to destinations by way of +\fBroute\fR executes its subcommands on routes to destinations by way of gateways. .SS "Destinations and Gateways" -.sp .LP By default, destination and gateway addresses are interpreted as IPv4 addresses. All symbolic names are tried first as a host name, using @@ -259,7 +254,7 @@ addresses. All symbolic names are tried first as a host name, using .sp .LP Including an optional modifier on the command line before the address changes -how the \fBroute\fR sub-command interprets it. +how the \fBroute\fR subcommand interprets it. .sp .LP The following modifiers are supported: @@ -448,7 +443,6 @@ multipathing) group, then requests to add a route will automatically be translated to the corresponding IPMP IP interface, and requests to delete or change a route on an underlying interface will fail. .SS "Routing Flags" -.sp .LP Routes have associated flags that influence operation of the protocols when sending to destinations matched by the routes. These flags can be set (and in @@ -603,7 +597,6 @@ sensitivity label. .RE .SS "Compatibility" -.sp .LP The modifiers \fBhost\fR and \fBnet\fR are taken to be equivalent to \fB-\fR\fBhost\fR and \fB-net\fR\fB\fR. To specify a symbolic address that @@ -630,7 +623,6 @@ _ The \fB\fR\fB-ifa\fR \fBhostname\fR modifier is also accepted, but has no effect. .SH FILES -.sp .ne 2 .na \fB\fB/etc/defaultrouter\fR\fR @@ -658,7 +650,6 @@ List of network names and addresses .RE .SH SEE ALSO -.sp .LP \fBuname\fR(1), \fBin.ripngd\fR(1M), \fBin.routed\fR(1M), \fBnetstat\fR(1M), \fBrouted\fR(1M), \fBioctl\fR(2), \fBgetipnodebyname\fR(3SOCKET), @@ -666,7 +657,6 @@ List of network names and addresses \fBhosts\fR(4), \fBnetworks\fR(4), \fBattributes\fR(5), \fBARP\fR(7P), \fBip\fR(7P), \fBroute\fR(7P), \fBrouting\fR(7P) .SH DIAGNOSTICS -.sp .ne 2 .na \fB\fBadd\fR [ \fBhost\fR\||\ \fBnetwork\|]\fR \fIdestination\fR:\fIgateway\fR @@ -704,7 +694,7 @@ As \fBadd\fR, but when deleting or changing an entry. .ad .sp .6 .RS 4n -When the \fB-f\fR flag is specified, or the \fBflush\fR sub-command is used, +When the \fB-f\fR flag is specified, or the \fBflush\fR subcommand is used, each routing table entry deleted is indicated with a message of this form. .RE @@ -763,7 +753,6 @@ process does not have appropriate privileges. .RE .SH NOTES -.sp .LP Specifying that destinations are local (with the \fB-interface\fRmodifier) assumes that the routers implement \fBproxy ARP\fR, meaning that they respond diff --git a/usr/src/man/man1m/sasinfo.1m b/usr/src/man/man1m/sasinfo.1m index 7bbec47a15..3098e2b84d 100644 --- a/usr/src/man/man1m/sasinfo.1m +++ b/usr/src/man/man1m/sasinfo.1m @@ -43,7 +43,6 @@ sasinfo \- Serial Attached SCSI HBA port command line interface .fi .SH DESCRIPTION -.sp .LP The \fBsasinfo\fR utility is a command line interface that collects administrative information on Serial Attached SCSI-2 (SAS-2) host bus adapter @@ -53,8 +52,7 @@ that might be connected to those HBA ports. .sp .LP \fBsasinfo\fR is implemented as a set of subcommands, described below. -.SH SUB-COMMANDS -.sp +.SH SUBCOMMANDS .LP The following subcommands are supported by \fBsasinfo\fR. .sp @@ -120,7 +118,6 @@ including the SAS Management Protocol (SMP) target port. .RE .SH OPTIONS -.sp .LP The following options are supported. .sp @@ -717,7 +714,6 @@ OS Device Name: /dev/rdsk/c4t50020F230000B4AFd0s2 .sp .SH ATTRIBUTES -.sp .LP See \fBattributes\fR(5) for descriptions of the following attributes: .sp @@ -733,6 +729,5 @@ Interface Stability Committed .TE .SH SEE ALSO -.sp .LP \fBattributes\fR(5) diff --git a/usr/src/man/man1m/sbdadm.1m b/usr/src/man/man1m/sbdadm.1m index 6efdfa6abb..5445dff56f 100644 --- a/usr/src/man/man1m/sbdadm.1m +++ b/usr/src/man/man1m/sbdadm.1m @@ -33,12 +33,10 @@ sbdadm \- SCSI Block Disk command line interface .fi .SH DESCRIPTION -.sp .LP The \fBsbdadm\fR command creates and manages SCSI-block-device-based logical units that are registered with the SCSI Target Mode Framework (STMF). -.SH SUB-COMMANDS -.sp +.SH SUBCOMMANDS .LP The \fBsbdadm\fR command supports the subcommands listed below. Note that if you enter a question mark as an argument to the command (\fBsbdadm ?\fR), @@ -169,7 +167,6 @@ The size specified can exceed the size of the file or device represented by .RE .SH OPERANDS -.sp .LP \fBsbdadm\fR use the following operands: .sp @@ -230,7 +227,6 @@ Found 2 LU(s) .sp .SH EXIT STATUS -.sp .ne 2 .na \fB\fB0\fR\fR @@ -251,7 +247,6 @@ An error occurred. .RE .SH ATTRIBUTES -.sp .LP See \fBattributes\fR(5) for descriptions of the following attributes: .sp @@ -267,6 +262,5 @@ Interface Stability Obsolete Committed .TE .SH SEE ALSO -.sp .LP \fBstmfadm\fR(1M), \fBattributes\fR(5) diff --git a/usr/src/man/man1m/smbadm.1m b/usr/src/man/man1m/smbadm.1m index 257e24e537..9fada6fca3 100644 --- a/usr/src/man/man1m/smbadm.1m +++ b/usr/src/man/man1m/smbadm.1m @@ -201,7 +201,7 @@ Specifies the name of the \fBCIFS\fR local group. Specifies the name of a Solaris local user. .RE -.SH SUB-COMMANDS +.SH SUBCOMMANDS .LP The \fBsmbadm\fR command includes these subcommands: .sp @@ -408,7 +408,7 @@ Selected domain controller .sp .6 .RS 4n Lookup the SID for the given \fIaccount-name\fR, or lookup the -\fIaccount-name\fR for the given SID. This sub-command is +\fIaccount-name\fR for the given SID. This subcommand is primarily for diagnostic use, to confirm whether the server can lookup domain accounts and/or SIDs. .RE diff --git a/usr/src/man/man1m/smtnrhdb.1m b/usr/src/man/man1m/smtnrhdb.1m index 2f8c5dd3f0..74734855e3 100644 --- a/usr/src/man/man1m/smtnrhdb.1m +++ b/usr/src/man/man1m/smtnrhdb.1m @@ -13,7 +13,6 @@ smtnrhdb \- manage entries in the tnrhdb database .fi .SH DESCRIPTION -.sp .LP The \fBsmtnrhdb\fR command adds, modifies, deletes, and lists entries in the \fBtnrhdb\fR database. @@ -30,7 +29,6 @@ initialized for the command to succeed (see \fBsmc\fR(1M)). After rebooting the Solaris Management Console server, the first \fBsmc\fR connection can time out, so you might need to retry the command. .SS "Valid Host Addresses and Wildcards" -.sp .LP The trusted network software uses a network "longest prefix of matching bits" mechanism when looking for a host. The software looks first for the IP address @@ -56,8 +54,7 @@ addresses, see \fISystem Administration Guide: IP Services\fR. The \fBsmtnrhdb\fR command accepts a hostname, IP address, and wildcard address with as optional prefix as valid addresses. See \fIsubcommand_args\fR, below, for the format of valid addresses. -.SH SUB-COMMANDS -.sp +.SH SUBCOMMANDS .LP \fBsmtnrhdb\fR \fIsubcommand\fRs are: .sp @@ -109,7 +106,6 @@ administrator must have the \fBsolaris.network.host.write\fR and .RE .SH OPTIONS -.sp .LP The \fBsmtnrhdb\fR authentication arguments, \fIauth_args\fR, are derived from the \fBsmc\fR arg set. These arguments are the same regardless of which @@ -119,7 +115,6 @@ subcommand you use. The subcommand-specific options, \fIsubcommand_args\fR, must be preceded by the \fB--\fR option. .SS "\fIauth_args\fR" -.sp .LP The valid \fIauth_args\fR are \fB-D\fR, \fB-H\fR, \fB-l\fR, \fB-p\fR, \fB-r\fR, and \fB-u\fR; they are all optional. If no \fIauth_args\fR are specified, @@ -219,7 +214,6 @@ not enter the preceding options, you must still enter the \fB--\fR option. .RE .SS "\fIsubcommand_args\fR" -.sp .LP \fBNote:\fR Descriptions and other arg options that contain white spaces must be enclosed in double quotes. @@ -450,7 +444,6 @@ from machine1.ExampleCo.COM was successful. .sp .SH EXIT STATUS -.sp .LP The following exit values are returned: .sp @@ -484,7 +477,6 @@ An error occurred while executing the command. An error message displays. .RE .SH FILES -.sp .LP The following files are used by the \fBsmtnrhdb\fR command: .sp @@ -498,7 +490,6 @@ Trusted network remote-host database. .RE .SH ATTRIBUTES -.sp .LP See \fBattributes\fR(5) for descriptions of the following attributes: .sp @@ -514,14 +505,12 @@ Interface Stability Committed .TE .SH SEE ALSO -.sp .LP \fBsmc\fR(1M), \fBnetmasks\fR(4), \fBattributes\fR(5) .sp .LP \fISystem Administration Guide: Security Services\fR .SH NOTES -.sp .LP The functionality described on this manual page is available only if the system is configured with Trusted Extensions. diff --git a/usr/src/man/man1m/tpmadm.1m b/usr/src/man/man1m/tpmadm.1m index 8f52ef0f9b..c60b356165 100644 --- a/usr/src/man/man1m/tpmadm.1m +++ b/usr/src/man/man1m/tpmadm.1m @@ -38,7 +38,6 @@ tpmadm \- administer Trusted Platform Module .fi .SH DESCRIPTION -.sp .LP A Trusted Platform Module (TPM) is a hardware component that provides for protected key storage and reliable measurements of software used to boot the @@ -69,8 +68,7 @@ regardless of the privilege level of the calling process. Second, the TPM owner is not able to override access controls for data protected by TPM keys. The owner can effectively destroy data by re-initializing the TPM, but he cannot access data that has been encrypted using TPM keys owned by other users. -.SH SUB-COMMANDS -.sp +.SH SUBCOMMANDS .LP The following subcommands are used in the form: .sp @@ -170,7 +168,6 @@ storage. .RE .SH EXIT STATUS -.sp .LP After completing the requested operation, \fBtpmadm\fR exits with one of the following status values. @@ -205,7 +202,6 @@ Usage error. The \fBtpmadm\fR command was invoked with invalid arguments. .RE .SH ATTRIBUTES -.sp .LP See \fBattributes\fR(5) for descriptions of the following attributes: .sp @@ -221,7 +217,6 @@ Interface Stability Committed .TE .SH SEE ALSO -.sp .LP \fBattributes\fR(5) .sp diff --git a/usr/src/tools/onbld/Checks/SpellCheck.py b/usr/src/tools/onbld/Checks/SpellCheck.py index da4ab55cdb..13ab16c7c2 100644 --- a/usr/src/tools/onbld/Checks/SpellCheck.py +++ b/usr/src/tools/onbld/Checks/SpellCheck.py @@ -242,6 +242,8 @@ misspellings = { } alternates = { + 'sub-command': 'subcommand', + 'sub-commands': 'subcommands', 'writeable': 'writable' } -- cgit v1.2.3 From f3a07f941f1be263a48a040c059edbcb722cf436 Mon Sep 17 00:00:00 2001 From: Cody Peter Mello Date: Thu, 24 Mar 2016 00:46:42 +0000 Subject: 4712 Prefer 'parsable' over 'parseable' in the manual pages Reviewed by: Robert Mustacchi Approved by: Dan McDonald --- usr/src/man/man1/cputrack.1 | 8 +--- usr/src/man/man1/elfsign.1 | 2 +- usr/src/man/man1/prctl.1 | 10 +--- usr/src/man/man1m/cpustat.1m | 9 +--- usr/src/man/man1m/dladm.1m | 82 ++++++++++++++++---------------- usr/src/man/man1m/flowadm.1m | 17 ++----- usr/src/man/man1m/ipmpstat.1m | 18 +++---- usr/src/man/man1m/kstat.1m | 12 +---- usr/src/man/man1m/routeadm.1m | 8 +--- usr/src/tools/onbld/Checks/SpellCheck.py | 1 + 10 files changed, 59 insertions(+), 108 deletions(-) (limited to 'usr/src/man/man1') diff --git a/usr/src/man/man1/cputrack.1 b/usr/src/man/man1/cputrack.1 index 24afa6ae21..ab1dd45d49 100644 --- a/usr/src/man/man1/cputrack.1 +++ b/usr/src/man/man1/cputrack.1 @@ -25,7 +25,6 @@ cputrack \- monitor process and LWP behavior using CPU performance counters .fi .SH DESCRIPTION -.sp .LP The \fBcputrack\fR utility allows \fBCPU\fR performance counters to be used to monitor the behavior of a process or family of processes running on the system. @@ -43,7 +42,6 @@ Because \fBcputrack\fR is an unprivileged program, it is subject to the same restrictions that apply to \fBtruss\fR(1). For example, \fBsetuid\fR(2) executables cannot be tracked. .SH OPTIONS -.sp .LP The following options are supported: .sp @@ -189,7 +187,6 @@ Enables more verbose output. .RE .SH USAGE -.sp .LP The operating system enforces certain restrictions on the tracing of processes. In particular, a command whose object file cannot be read by a user cannot be @@ -234,7 +231,7 @@ user and system modes, regardless of the settings applied to the performance counter registers. .sp .LP -The output of \fBcputrack\fR is designed to be readily parseable by +The output of \fBcputrack\fR is designed to be readily parsable by \fBnawk\fR(1) and \fBperl\fR(1), thereby allowing performance tools to be composed by embedding \fBcputrack\fR in scripts. Alternatively, tools may be constructed directly using the same \fBAPI\fRs that \fBcputrack\fR is built @@ -366,7 +363,6 @@ example% \fBcputrack -c ITLB_reference,emask=1 date\fR .sp .SH WARNINGS -.sp .LP By running any instance of the \fBcpustat\fR(1M) utility, all existing performance counter context is forcibly invalidated across the machine. This @@ -394,7 +390,6 @@ the problem and possible solutions. If a short interval is requested, \fBcputrack\fR may not be able to keep up with the desired sample rate. In this case, some samples may be dropped. .SH ATTRIBUTES -.sp .LP See \fBattributes\fR(5) for descriptions of the following attributes: .sp @@ -409,7 +404,6 @@ Interface Stability Evolving .TE .SH SEE ALSO -.sp .LP \fBnawk\fR(1), \fBperl\fR(1), \fBproc\fR(1), \fBtruss\fR(1), \fBprstat\fR(1M), \fBcpustat\fR(1M), \fBexec\fR(2), \fBexit\fR(2), \fBfork\fR(2), diff --git a/usr/src/man/man1/elfsign.1 b/usr/src/man/man1/elfsign.1 index 993909053d..dc74316816 100644 --- a/usr/src/man/man1/elfsign.1 +++ b/usr/src/man/man1/elfsign.1 @@ -285,7 +285,7 @@ It is an error to specify both the \fB-T\fR and \fB-k\fR options. .RS 4n Requests more detailed information. The additional output includes the signer and, if the signature format contains it, the time the object was signed. This -is not stable parseable output. +is not stable parsable output. .RE .SH OPERANDS diff --git a/usr/src/man/man1/prctl.1 b/usr/src/man/man1/prctl.1 index 3f1f19fa2a..0e117a510b 100644 --- a/usr/src/man/man1/prctl.1 +++ b/usr/src/man/man1/prctl.1 @@ -16,7 +16,6 @@ projects .fi .SH DESCRIPTION -.sp .LP The \fBprctl\fR utility allows the examination and modification of the resource controls associated with an active process, task, or project on the system. It @@ -27,7 +26,6 @@ the specified entity. See \fBresource_controls\fR(5) for a description of the resource controls supported in the current release of the Solaris operating system. .SH OPTIONS -.sp .LP The following options are supported: .sp @@ -238,7 +236,6 @@ If none of the \fB-s\fR, \fB-r\fR, \fB-x\fR, \fB-v\fR, \fB-d\fR, or \fB-e\fR options are specified, the invocation is considered a get operation. Otherwise, it is considered a modify operation. .SH OPERANDS -.sp .LP The following operand is supported: .sp @@ -497,7 +494,6 @@ The cap can be lowered to 50% using: .sp .SH EXIT STATUS -.sp .LP The following exit values are returned: .sp @@ -528,7 +524,6 @@ Invalid command line options were specified. .RE .SH FILES -.sp .ne 2 .na \fB\fB/proc/pid/*\fR\fR @@ -538,7 +533,6 @@ Process information and control files .RE .SH ATTRIBUTES -.sp .LP See \fBattributes\fR(5) for descriptions of the following attributes: .sp @@ -556,15 +550,13 @@ Interface Stability See below. .sp .LP The command-line syntax is Committed. The human-readable output is Uncommitted. -The parseable output is Committed. +The parsable output is Committed. .SH SEE ALSO -.sp .LP \fBrctladm\fR(1M), \fBzonecfg\fR(1M), \fBsetrctl\fR(2), \fBrctlblk_get_local_action\fR(3C), \fBproject\fR(4), \fBattributes\fR(5), \fBresource_controls\fR(5) .SH NOTES -.sp .LP The valid signals that can be set on a resource control block allowing local actions are \fBSIGABRT\fR, \fBSIGXRES\fR, \fBSIGHUP\fR, \fBSIGSTOP\fR, diff --git a/usr/src/man/man1m/cpustat.1m b/usr/src/man/man1m/cpustat.1m index 53b93865dd..3ec2265bde 100644 --- a/usr/src/man/man1m/cpustat.1m +++ b/usr/src/man/man1m/cpustat.1m @@ -16,7 +16,6 @@ cpustat \- monitor system behavior using CPU performance counters .fi .SH DESCRIPTION -.sp .LP The \fBcpustat\fR utility allows \fBCPU\fR performance counters to be used to monitor the overall behavior of the \fBCPU\fRs in the system. @@ -28,7 +27,6 @@ statistics are repeated \fIcount\fR times. If neither are specified, an interval of five seconds is used, and there is no limit to the number of samples that are taken. .SH OPTIONS -.sp .LP The following options are supported: .sp @@ -157,7 +155,6 @@ current architecture. .RE .SH USAGE -.sp .LP A closely related utility, \fBcputrack\fR(1), can be used to monitor the behavior of individual applications with little or no interference from other @@ -195,7 +192,7 @@ processor clock cycles. If such an event is of interest, sampling should occur frequently so that less than 4 billion clock cycles can occur between samples. .sp .LP -The output of cpustat is designed to be readily parseable by \fBnawk\fR(1) and +The output of cpustat is designed to be readily parsable by \fBnawk\fR(1) and \fBperl\fR(1), thereby allowing performance tools to be composed by embedding \fBcpustat\fR in scripts. Alternatively, tools can be constructed directly using the same \fBAPI\fRs that \fBcpustat\fR is built upon using the facilities @@ -295,7 +292,6 @@ cpustat -c \e .sp .SH WARNINGS -.sp .LP By running the \fBcpustat\fR command, the super-user forcibly invalidates all existing performance counter context. This can in turn cause all invocations of @@ -323,7 +319,6 @@ the problem and possible solutions. If a short interval is requested, \fBcpustat\fR might not be able to keep up with the desired sample rate. In this case, some samples might be dropped. .SH ATTRIBUTES -.sp .LP See \fBattributes\fR(5) for descriptions of the following attributes: .sp @@ -339,14 +334,12 @@ Interface Stability Evolving .TE .SH SEE ALSO -.sp .LP \fBcputrack\fR(1), \fBnawk\fR(1), \fBperl\fR(1), \fBiostat\fR(1M), \fBprstat\fR(1M), \fBpsrset\fR(1M), \fBvmstat\fR(1M), \fBcpc\fR(3CPC), \fBcpc_open\fR(3CPC), \fBcpc_bind_cpu\fR(3CPC), \fBgethrtime\fR(3C), \fBstrtoll\fR(3C), \fBlibcpc\fR(3LIB), \fBattributes\fR(5) .SH NOTES -.sp .LP When \fBcpustat\fR is run on a Pentium 4 with HyperThreading enabled, a CPC set is bound to only one logical CPU of each physical CPU. See diff --git a/usr/src/man/man1m/dladm.1m b/usr/src/man/man1m/dladm.1m index 4d46f45cf3..63ae57bbeb 100644 --- a/usr/src/man/man1m/dladm.1m +++ b/usr/src/man/man1m/dladm.1m @@ -524,12 +524,12 @@ Number of output errors. .sp .ne 2 .na -\fB\fB-p\fR, \fB--parseable\fR\fR +\fB\fB-p\fR, \fB--parsable\fR\fR .ad .sp .6 .RS 4n -Display using a stable machine-parseable format. The \fB-o\fR option is -required with \fB-p\fR. See "Parseable Output Format", below. +Display using a stable machine-parsable format. The \fB-o\fR option is +required with \fB-p\fR. See "Parsable Output Format", below. .RE .sp @@ -811,12 +811,12 @@ The name of the physical device under this link. .sp .ne 2 .na -\fB\fB-p\fR, \fB--parseable\fR\fR +\fB\fB-p\fR, \fB--parsable\fR\fR .ad .sp .6 .RS 4n -Display using a stable machine-parseable format. The \fB-o\fR option is -required with \fB-p\fR. See "Parseable Output Format", below. +Display using a stable machine-parsable format. The \fB-o\fR option is +required with \fB-p\fR. See "Parsable Output Format", below. .RE .sp @@ -1487,12 +1487,12 @@ fields listed under \fB-L\fR, above, can be used with \fB-o\fR. .sp .ne 2 .na -\fB\fB-p\fR, \fB--parseable\fR\fR +\fB\fB-p\fR, \fB--parsable\fR\fR .ad .sp .6 .RS 4n -Display using a stable machine-parseable format. The \fB-o\fR option is -required with \fB-p\fR. See "Parseable Output Format", below. +Display using a stable machine-parsable format. The \fB-o\fR option is +required with \fB-p\fR. See "Parsable Output Format", below. .RE .sp @@ -1802,7 +1802,7 @@ links. This option cannot be used with the \fB-f\fR and \fB-t\fR options. .sp .ne 2 .na -\fB\fB-p\fR, \fB--parseable\fR\fR +\fB\fB-p\fR, \fB--parsable\fR\fR .ad .sp .6 .RS 4n @@ -2604,12 +2604,12 @@ Additional flags might be defined in the future. .sp .ne 2 .na -\fB\fB-p\fR, \fB--parseable\fR\fR +\fB\fB-p\fR, \fB--parsable\fR\fR .ad .sp .6 .RS 4n -Display using a stable machine-parseable format. The \fB-o\fR option is -required with \fB-p\fR. See "Parseable Output Format", below. +Display using a stable machine-parsable format. The \fB-o\fR option is +required with \fB-p\fR. See "Parsable Output Format", below. .RE .sp @@ -2739,12 +2739,12 @@ Either \fBbss\fR for \fBBSS\fR (infrastructure) networks, or \fBibss\fR for .sp .ne 2 .na -\fB\fB-p\fR, \fB--parseable\fR\fR +\fB\fB-p\fR, \fB--parsable\fR\fR .ad .sp .6 .RS 4n -Display using a stable machine-parseable format. The \fB-o\fR option is -required with \fB-p\fR. See "Parseable Output Format", below. +Display using a stable machine-parsable format. The \fB-o\fR option is +required with \fB-p\fR. See "Parsable Output Format", below. .RE .RE @@ -3051,12 +3051,12 @@ displayed. .sp .ne 2 .na -\fB\fB-p\fR, \fB--parseable\fR\fR +\fB\fB-p\fR, \fB--parsable\fR\fR .ad .sp .6 .RS 4n -Displays using a stable machine-parseable format. The \fB-o\fR option is -required with \fB-p\fR. See "Parseable Output Format", below. +Displays using a stable machine-parsable format. The \fB-o\fR option is +required with \fB-p\fR. See "Parsable Output Format", below. .RE .RE @@ -3169,12 +3169,12 @@ By default, all fields except \fBREM_FAULT\fR are displayed for the "current" .sp .ne 2 .na -\fB\fB-p\fR, \fB--parseable\fR\fR +\fB\fB-p\fR, \fB--parsable\fR\fR .ad .sp .6 .RS 4n -Displays using a stable machine-parseable format. The \fB-o\fR option is -required with \fB-p\fR. See "Parseable Output Format", below. +Displays using a stable machine-parsable format. The \fB-o\fR option is +required with \fB-p\fR. See "Parsable Output Format", below. .RE .sp @@ -3390,12 +3390,12 @@ driver man page for details. .sp .ne 2 .na -\fB\fB-c\fR, \fB--parseable\fR\fR +\fB\fB-c\fR, \fB--parsable\fR\fR .ad .sp .6 .RS 4n -Display using a stable machine-parseable format. The \fB-o\fR option is -required with this option. See "Parseable Output Format", below. +Display using a stable machine-parsable format. The \fB-o\fR option is +required with this option. See "Parsable Output Format", below. .RE .sp @@ -3575,12 +3575,12 @@ The class of the secure object. .sp .ne 2 .na -\fB\fB-p\fR, \fB--parseable\fR\fR +\fB\fB-p\fR, \fB--parsable\fR\fR .ad .sp .6 .RS 4n -Display using a stable machine-parseable format. The \fB-o\fR option is -required with \fB-p\fR. See "Parseable Output Format", below. +Display using a stable machine-parsable format. The \fB-o\fR option is +required with \fB-p\fR. See "Parsable Output Format", below. .RE .sp @@ -3854,12 +3854,12 @@ A factory MAC address used by the VNIC. .sp .ne 2 .na -\fB\fB-p\fR, \fB--parseable\fR\fR +\fB\fB-p\fR, \fB--parsable\fR\fR .ad .sp .6 .RS 4n -Display using a stable machine-parseable format. The \fB-o\fR option is -required with \fB-p\fR. See "Parseable Output Format", below. +Display using a stable machine-parsable format. The \fB-o\fR option is +required with \fB-p\fR. See "Parsable Output Format", below. .RE .sp @@ -4212,12 +4212,12 @@ Display the persistent IP tunnel configuration. .sp .ne 2 .na -\fB\fB-p\fR, \fB--parseable\fR\fR +\fB\fB-p\fR, \fB--parsable\fR\fR .ad .sp .6 .RS 4n -Display using a stable machine-parseable format. The -o option is required with --p. See "Parseable Output Format", below. +Display using a stable machine-parsable format. The -o option is required with +-p. See "Parsable Output Format", below. .RE .sp @@ -4403,10 +4403,10 @@ display network usage for all links. .RE -.SS "Parseable Output Format" +.SS "Parsable Output Format" .LP Many \fBdladm\fR subcommands have an option that displays output in a -machine-parseable format. The output format is one or more lines of colon +machine-parsable format. The output format is one or more lines of colon (\fB:\fR) delimited fields. The fields displayed are specific to the subcommand used and are listed under the entry for the \fB-o\fR option for a given subcommand. Output includes only those fields requested by means of the @@ -4415,7 +4415,7 @@ subcommand. Output includes only those fields requested by means of the .LP When you request multiple fields, any literal colon characters are escaped by a backslash (\fB\e\fR) before being output. Similarly, literal backslash -characters will also be escaped (\fB\e\e\fR). This escape format is parseable +characters will also be escaped (\fB\e\e\fR). This escape format is parsable by using shell \fBread\fR(1) functions with the environment variable \fBIFS=:\fR (see \fBEXAMPLES\fR, below). Note that escaping is not done when you request only a single field. @@ -4429,7 +4429,7 @@ The following general link properties are supported: .ad .sp .6 .RS 4n -A comma-seperated list of IP addresses that are allowed on the interface. +A comma-separated list of IP addresses that are allowed on the interface. .sp An address in CIDR format with no host address specified is used to indicate that any address on that subnet is allowed (e.g. 192.168.10.0/24 means any @@ -4893,7 +4893,7 @@ capabilities allowed by the device and the link partner. .ad .sp .6 .RS 4n -A comma-seperated list of additional MAC addresses that are allowed on the +A comma-separated list of additional MAC addresses that are allowed on the interface. .RE @@ -5145,7 +5145,7 @@ hardware (\fBbge0\fR in this case) has been removed: .sp .LP -\fBExample 10 \fRUsing Parseable Output to Capture a Single Field +\fBExample 10 \fRUsing Parsable Output to Capture a Single Field .sp .LP The following assignment saves the MTU of link \fBnet0\fR to a variable named @@ -5160,7 +5160,7 @@ The following assignment saves the MTU of link \fBnet0\fR to a variable named .sp .LP -\fBExample 11 \fRUsing Parseable Output to Iterate over Links +\fBExample 11 \fRUsing Parsable Output to Iterate over Links .sp .LP The following script displays the state of each link on the system. diff --git a/usr/src/man/man1m/flowadm.1m b/usr/src/man/man1m/flowadm.1m index 605833c0ef..5eca181426 100644 --- a/usr/src/man/man1m/flowadm.1m +++ b/usr/src/man/man1m/flowadm.1m @@ -36,7 +36,6 @@ services, containers, and virtual machines .fi .SH DESCRIPTION -.sp .LP The \fBflowadm\fR command is used to create, modify, remove, and show networking bandwidth and associated resources for a type of traffic on a @@ -161,11 +160,11 @@ header. .sp .ne 2 .na -\fB\fB-p\fR, \fB--parseable\fR\fR +\fB\fB-p\fR, \fB--parsable\fR\fR .ad .sp .6 .RS 4n -Display using a stable machine-parseable format. +Display using a stable machine-parsable format. .RE .sp @@ -506,11 +505,11 @@ Flow properties are documented in the "Flow Properties" section, below. .sp .ne 2 .na -\fB\fB-c\fR, \fB--parseable\fR\fR +\fB\fB-c\fR .ad .sp .6 .RS 4n -Display using a stable machine-parseable format. +Display using a stable machine-parsable format. .RE .sp @@ -628,7 +627,6 @@ Otherwise, display network usage from all flows. .RE .SS "Flow Attributes" -.sp .LP The flow operand that identify a flow in a \fBflowadm\fR command is a comma-separated list of one or more keyword, value pairs from the list below. @@ -719,11 +717,9 @@ dsfield=\fIval\fR[:\fIdsfield_mask\fR] On a given link, the combinations above are mutually exclusive. An attempt to create flows of different combinations will fail. .SS "Restrictions" -.sp .LP There are individual flow restrictions and flow restrictions per zone. .SS "Individual Flow Restrictions" -.sp .LP Restrictions on individual flows do not require knowledge of other flows that have been added to the link. @@ -770,13 +766,11 @@ flow16\fR .sp .SS "Flow Restrictions Per Zone" -.sp .LP Within a zone, no two flows can have the same name. After adding a flow with the link specified, the link will not be required for display, modification, or deletion of the flow. .SS "Flow Properties" -.sp .LP The following flow properties are supported. Note that the ability to set a given property to a given value depends on the driver and hardware. @@ -976,7 +970,6 @@ Output the same information as above as a plotfile: .sp .SH EXIT STATUS -.sp .ne 2 .na \fB\fB0\fR\fR @@ -997,7 +990,6 @@ An error occurred. .RE .SH ATTRIBUTES -.sp .LP See \fBattributes\fR(5) for descriptions of the following attributes: .sp @@ -1013,7 +1005,6 @@ Interface Stability Committed .TE .SH SEE ALSO -.sp .LP \fBacctadm\fR(1M), \fBdladm\fR(1M), \fBifconfig\fR(1M), \fBprstat\fR(1M), \fBroute\fR(1M), \fBattributes\fR(5), \fBdlpi\fR(7P) diff --git a/usr/src/man/man1m/ipmpstat.1m b/usr/src/man/man1m/ipmpstat.1m index 45e0d917f0..6a9d793c4d 100644 --- a/usr/src/man/man1m/ipmpstat.1m +++ b/usr/src/man/man1m/ipmpstat.1m @@ -13,19 +13,17 @@ ipmpstat \- display IPMP subsystem status .fi .SH DESCRIPTION -.sp .LP The \fBipmpstat\fR command concisely displays information about the IPMP subsystem. It supports five different output modes, each of which provides a different view of the IPMP subsystem (address, group, interface, probe, and target), described below. At most one output mode may be specified per invocation, and the displayed information is guaranteed to be self-consistent. -It also provides a parseable output format which may be used by scripts to +It also provides a parsable output format which may be used by scripts to examine the state of the IPMP subsystem. Only basic privileges are needed to invoke \fBipmpstat\fR, with the exception of probe mode which requires all privileges. .SH OPTIONS -.sp .LP The following options are supported: .sp @@ -109,13 +107,12 @@ Display IPMP target information ("target" output mode). .ad .sp .6 .RS 4n -Display using a machine-parseable format, described below. If this option is +Display using a machine-parsable format, described below. If this option is specified, an explicit list of fields must be specified using the \fB-o\fR option. .RE .SH OUTPUT MODES -.sp .LP The \fBipmpstat\fR utility supports the output modes listed below. Note that these modes map to some of the options described above. @@ -765,7 +762,6 @@ If \fB-o\fR is not specified, all output fields are displayed. .RE .SH OUTPUT FORMAT -.sp .LP By default, \fBipmpstat\fR uses a human-friendly tabular format for its output modes, where each row contains one or more fields of information about a given @@ -778,8 +774,8 @@ displayed as "\fB?\fR" and a diagnostic message will be output to standard error. .sp .LP -Machine-parseable format also uses a tabular format, but is designed to be -efficient to programmatically parse. Specifically, machine-parseable format +Machine-parsable format also uses a tabular format, but is designed to be +efficient to programmatically parse. Specifically, machine-parsable format differs from human-friendly format in the following ways: .RS +4 .TP @@ -813,7 +809,7 @@ If multiple fields are requested, and a literal \fB:\fR or a backslash \fBExample 1 \fRObtaining Failure Detection Time of a Specific Interface .sp .LP -The following code uses the machine-parseable output format to create a +The following code uses the machine-parsable output format to create a \fBksh\fR function that outputs the failure detection time of a given IPMP IP interface: @@ -830,7 +826,6 @@ interface: .sp .SH ATTRIBUTES -.sp .LP See \fBattributes\fR(5) for descriptions of the following attributes: .sp @@ -847,7 +842,7 @@ ATTRIBUTE TYPE ATTRIBUTE VALUE _ Interface Stability Committed _ -Machine-Parseable Format Committed +Machine-Parsable Format Committed _ Human-Friendly Format Not-an-Interface .TE @@ -856,7 +851,6 @@ Human-Friendly Format Not-an-Interface .LP \fB/sbin/ipmpstat\fR is not a Committed interface. .SH SEE ALSO -.sp .LP \fBif_mpadm\fR(1M), \fBifconfig\fR(1M), \fBin.mpathd\fR(1M), \fBattributes\fR(5) diff --git a/usr/src/man/man1m/kstat.1m b/usr/src/man/man1m/kstat.1m index 8bc6a751df..8983df7266 100644 --- a/usr/src/man/man1m/kstat.1m +++ b/usr/src/man/man1m/kstat.1m @@ -22,7 +22,6 @@ kstat \- display kernel statistics .fi .SH DESCRIPTION -.sp .LP The \fBkstat\fR utility examines the available kernel statistics, or kstats, on the system and reports those statistics which match the criteria specified on @@ -50,7 +49,6 @@ When invoked without any module operands or options, kstat will match all defined statistics on the system. Example invocations are provided below. All times are displayed as fractional seconds since system boot. .SH OPTIONS -.sp .LP The tests specified by the following options are logically ANDed, and all matching kstats will be selected. A regular expression containing shell @@ -67,7 +65,7 @@ enclosed in '/' characters. \fB\fB-C\fR\fR .ad .RS 16n -Displays output in parseable format with a colon as separator. +Displays output in parsable format with a colon as separator. .RE .sp @@ -131,7 +129,7 @@ Displays only kstats that match the specified name. \fB\fB-p\fR\fR .ad .RS 16n -Displays output in parseable format. All example output in this document is +Displays output in parsable format. All example output in this document is given in this format. If this option is not specified, \fBkstat\fR produces output in a human-readable, table format. .RE @@ -167,7 +165,6 @@ format (\fBd\fR) or as an alphanumeric representation of the value returned by .RE .SH OPERANDS -.sp .LP The following operands are supported: .sp @@ -206,7 +203,6 @@ The number of reports to be printed. .RE .SH EXAMPLES -.sp .LP In the following examples, all the command lines in a block produce the same output, as shown immediately below. The exact statistics and values will of @@ -327,7 +323,6 @@ unix:0:system_misc:avenrun_5min 18 .sp .SH EXIT STATUS -.sp .LP The following exit values are returned: .sp @@ -367,7 +362,6 @@ A fatal error occurred. .RE .SH FILES -.sp .ne 2 .na \fB\fB/dev/kstat\fR\fR @@ -377,13 +371,11 @@ kernel statistics driver .RE .SH SEE ALSO -.sp .LP \fBdate\fR(1), \fBsh\fR(1), \fBtime\fR(2), \fBgmatch\fR(3GEN), \fBkstat\fR(3KSTAT), \fBattributes\fR(5), \fBregex\fR(5), \fBkstat\fR(7D), \fBsd\fR(7D), \fBkstat\fR(9S) .SH NOTES -.sp .LP If the pattern argument contains glob or RE metacharacters which are also shell metacharacters, it will be necessary to enclose the pattern with diff --git a/usr/src/man/man1m/routeadm.1m b/usr/src/man/man1m/routeadm.1m index 2a76f4091a..66e43c8177 100644 --- a/usr/src/man/man1m/routeadm.1m +++ b/usr/src/man/man1m/routeadm.1m @@ -34,7 +34,6 @@ routeadm \- IP forwarding and routing configuration .fi .SH DESCRIPTION -.sp .LP The \fBrouteadm\fR command is used to administer system-wide configuration for IP forwarding and routing. IP forwarding is the passing of IP packets from one @@ -80,7 +79,6 @@ service as appropriate. This conversion process occurs when you issue an enable .LP The first usage, in the SYNOPSIS above, reports the current configuration. .SH OPTIONS -.sp .LP The following command-line options are supported: .sp @@ -90,7 +88,7 @@ The following command-line options are supported: .ad .sp .6 .RS 4n -Print the configuration in parseable format. If \fIoption\fR is specified, only +Print the configuration in parsable format. If \fIoption\fR is specified, only the configuration for the specified option or variable is displayed. .RE @@ -501,7 +499,6 @@ See \fBin.routed\fR(1M) for details of property names and how they relate to daemon behavior. .SH EXIT STATUS -.sp .LP The following exit values are returned: .sp @@ -523,7 +520,6 @@ An error occurred while obtaining or modifying the system configuration. .RE .SH FILES -.sp .ne 2 .na \fB\fB/etc/inet/routing.conf\fR\fR @@ -533,7 +529,6 @@ Parameters for IP forwarding and routing. (Not to be edited.) .RE .SH ATTRIBUTES -.sp .LP See \fBattributes\fR(5) for descriptions of the following attributes: .sp @@ -549,7 +544,6 @@ Interface Stability Stable .TE .SH SEE ALSO -.sp .LP \fBifconfig\fR(1M), \fBin.routed\fR(1M), \fBsvcadm\fR(1M), \fBgateways\fR(4), \fBattributes\fR(5), \fBsmf\fR(5) diff --git a/usr/src/tools/onbld/Checks/SpellCheck.py b/usr/src/tools/onbld/Checks/SpellCheck.py index 13ab16c7c2..8923b41818 100644 --- a/usr/src/tools/onbld/Checks/SpellCheck.py +++ b/usr/src/tools/onbld/Checks/SpellCheck.py @@ -242,6 +242,7 @@ misspellings = { } alternates = { + 'parseable': 'parsable', 'sub-command': 'subcommand', 'sub-commands': 'subcommands', 'writeable': 'writable' -- cgit v1.2.3