Some more MESSAGE cleanup.

6 files changed, 42 insertions, 42 deletions

diff --git a/comms/hylafax/pkg/MESSAGE b/comms/hylafax/pkg/MESSAGE
index 0785d4f0691..f875e9ca9f5 100644
--- a/comms/hylafax/pkg/MESSAGE
+++ b/comms/hylafax/pkg/MESSAGE
@@ -1,3 +1,6 @@
+======================================================================
+$NetBSD: MESSAGE,v 1.3 2001/01/29 11:38:10 wiz Exp $
+
 Hylafax was installed.  You'll need manual configurations to actually
 activate it.
 
@@ -5,19 +8,15 @@ Setting up: (for impatients)
 
 	Invoke faxsetup, and answer what she asks.
 
-	Add the following to your rc.local script (insert the directory
-        your have your packages installed in -- for example /usr/pkg --
-        instead of <prefix> below):
+	Add the following to your rc.local script:
 
-	if [ -x <prefix>/sbin/faxq ]; then 
-		<prefix>/sbin/faxq && echo -n ' hylafax' 
+	if [ -x ${PREFIX}/sbin/faxq ]; then 
+		${PREFIX}/sbin/faxq && echo -n ' hylafax' 
 	fi
 
 	For accepting incoming FAX/data calls, modify /etc/ttys as below
 	and send SIGHUP to the init process: 
 
->tty00	"<prefix>/libexec/faxgetty"	dialup	on secure
+>tty00	"${PREFIX}/libexec/faxgetty"	dialup	on secure
 
-Documentation:
-	On Line Manuals: 	man hylafax.
-	World Wide Web site:	http://www.hylafax.org/
+======================================================================
diff --git a/cross/COMMON/cross.mk b/cross/COMMON/cross.mk
index 83388f4243a..e00480b034b 100644
--- a/cross/COMMON/cross.mk
+++ b/cross/COMMON/cross.mk
@@ -1,4 +1,4 @@
-#	$NetBSD: cross.mk,v 1.18 2001/01/29 10:25:07 abs Exp $
+#	$NetBSD: cross.mk,v 1.19 2001/01/29 11:38:10 wiz Exp $
 
 # Shared definitions for building a cross-compile environment.
 
@@ -12,6 +12,7 @@ HOMEPAGE?=		http://egcs.cygnus.com/
 TARGET_DIR=		${PREFIX}/${TARGET_ARCH}
 COMMON_DIR=		${PKGSRCDIR}/cross/COMMON
 PLIST_PRE?=		${PKGDIR}/PLIST
+MESSAGE_SUBST+=		CROSSBASE=${CROSSBASE}
 
 pre-install: pre-install-dirs
 pre-install-dirs:
diff --git a/mail/popa3d/pkg/MESSAGE b/mail/popa3d/pkg/MESSAGE
index d5e6b55488b..c9b50091a31 100644
--- a/mail/popa3d/pkg/MESSAGE
+++ b/mail/popa3d/pkg/MESSAGE
@@ -1,9 +1,10 @@
 =================================================================
+$NetBSD: MESSAGE,v 1.2 2001/01/29 11:38:10 wiz Exp $
 
 In order to enable POP service, you should add the following line
 to your /etc/inetd.conf:
 
- pop3 stream tcp nowait root ${PKG_PREFIX}/libexec/popa3d popa3d
+ pop3 stream tcp nowait root ${PREFIX}/libexec/popa3d popa3d
 
 and send a HUP signal to inetd.
 
diff --git a/net/ucd-snmp/pkg/MESSAGE b/net/ucd-snmp/pkg/MESSAGE
index 8297fc81e27..6d8d59d25a4 100644
--- a/net/ucd-snmp/pkg/MESSAGE
+++ b/net/ucd-snmp/pkg/MESSAGE
@@ -1,23 +1,22 @@
-# 
-# $NetBSD: MESSAGE,v 1.3 1999/04/05 00:59:08 hubertf Exp $
-#
-# You may want to install the x11/p5-Tk and net/p5-SNMP packages to
-# use the tkmib application!
-#
-# You may also want to install the net/scotty package to do network
-# monitoring.
-#
-# Finally, a note from the maintainer:
-# 
-#   I'm asking (begging) people to send me a postcard of your home city,
-#   area, or country.  I intend to arrange them into a logo, take a
-#   picture of them all, and use the picture on the ucd-snmp web page.
-#   I've gotten a few already, but need a lot more to make the logo a
-#   decent size.  The first pass from the postcards people have sent me so far
-#   can be seen on the ucd-snmp web site, listed below.  If you wish to send 
-#   a postcard, please send it to:
-# 
-#          Wes Hardaker
-#          IT - DCAS
-#          UCDavis
-#          Davis CA, 95616
+$NetBSD: MESSAGE,v 1.4 2001/01/29 11:38:10 wiz Exp $
+
+You may want to install the x11/p5-Tk and net/p5-SNMP packages to
+use the tkmib application!
+
+You may also want to install the net/scotty package to do network
+monitoring.
+
+Finally, a note from the maintainer:
+
+  I'm asking (begging) people to send me a postcard of your home city,
+  area, or country.  I intend to arrange them into a logo, take a
+  picture of them all, and use the picture on the ucd-snmp web page.
+  I've gotten a few already, but need a lot more to make the logo a
+  decent size.  The first pass from the postcards people have sent me so far
+  can be seen on the ucd-snmp web site, listed below.  If you wish to send 
+  a postcard, please send it to:
+
+         Wes Hardaker
+         IT - DCAS
+         UCDavis
+         Davis CA, 95616
diff --git a/news/nntpclnt/pkg/MESSAGE b/news/nntpclnt/pkg/MESSAGE
index 7c55883f77a..6f3ccae220d 100644
--- a/news/nntpclnt/pkg/MESSAGE
+++ b/news/nntpclnt/pkg/MESSAGE
@@ -1,18 +1,18 @@
 ==============================================================================
-$NetBSD: MESSAGE,v 1.3 1998/08/07 11:11:13 agc Exp $
+$NetBSD: MESSAGE,v 1.4 2001/01/29 11:38:10 wiz Exp $
 
 NOTE: THIS PACKAGE IS UNUSABLE WITHOUT SETTING UP THE FOLLOWING FILES:
 
-$PREFIX/etc/nntp/domainname (typically /usr/pkg/etc/nntp/domainname):
+${PREFIX}/etc/nntp/domainname:
     The domain name that should go after @ on NNTP posts by default
 
-$PREFIX/etc/nntp/server (typically /usr/pkg/etc/nntp/server):
+${PREFIX}/etc/nntp/server:
     The hostname or IP address of your NNTP server (this can be omitted
     if you set NNTPSERVER in your environment)
 
 Optionally,
 
-$PREFIX/etc/nntp/server.auth (typically /usr/pkg/etc/nntp/server.auth):
+${PREFIX}/etc/nntp/server.auth:
     "hostname user password" format authentication information for the
     NNTP server, if it requires authentication.  This file should only
     be readable by group "news".
diff --git a/security/openssl/pkg/MESSAGE b/security/openssl/pkg/MESSAGE
index 9f9cc875f75..8aabdfdfa6b 100644
--- a/security/openssl/pkg/MESSAGE
+++ b/security/openssl/pkg/MESSAGE
@@ -1,11 +1,11 @@
 ===========================================================================
-$NetBSD: MESSAGE,v 1.1.1.1 1999/04/30 15:19:13 tv Exp $
+$NetBSD: MESSAGE,v 1.2 2001/01/29 11:38:11 wiz Exp $
 
 If upgrading from SSLeay, you will need to copy your ssleay.cnf (used
-for creating certificate requests with "ca") into PREFIX/etc/openssl.cnf.
+for creating certificate requests with "ca") into ${PREFIX}/etc/openssl.cnf.
 
 If installing from scratch, you may want to take a look at
-PREFIX/etc/openssl.cnf.example, copy it to PREFIX/etc/openssl.cnf, and
-customize it.
+${PREFIX}/etc/openssl.cnf.example, copy it to ${PREFIX}/etc/openssl.cnf,
+and customize it.
 
 ===========================================================================