Remove the clause in dovecot-example.conf comments about configured paths,

as was done in wip/dovecot-nightly.  That comment is misleading with
pkgsrc, since those paths are not what pkgsrc encodes into the conf file.

Bump PKGREVISION (unfortunate, but there will be another beta pretty
soon anyway).

3 files changed, 17 insertions, 17 deletions

diff --git a/mail/dovecot/Makefile b/mail/dovecot/Makefile
index 7c5828a04f3..a134f07d5c8 100644
--- a/mail/dovecot/Makefile
+++ b/mail/dovecot/Makefile
@@ -1,7 +1,8 @@
-# $NetBSD: Makefile,v 1.45 2006/02/08 13:43:49 ghen Exp $
+# $NetBSD: Makefile,v 1.46 2006/02/10 12:20:55 tv Exp $
 
 DISTNAME=		dovecot-1.0.beta3
 PKGNAME=		${DISTNAME:S/.beta/beta/}
+PKGREVISION=		1
 CATEGORIES=		mail
 MASTER_SITES=		http://www.dovecot.org/releases/
 
diff --git a/mail/dovecot/distinfo b/mail/dovecot/distinfo
index 4e1d63ba1b5..e553dc6e647 100644
--- a/mail/dovecot/distinfo
+++ b/mail/dovecot/distinfo
@@ -1,7 +1,7 @@
-$NetBSD: distinfo,v 1.21 2006/02/08 13:43:49 ghen Exp $
+$NetBSD: distinfo,v 1.22 2006/02/10 12:20:55 tv Exp $
 
 SHA1 (dovecot-1.0.beta3.tar.gz) = a5d1fc471c88b96e0ef9d7296b25450a1d7a1419
 RMD160 (dovecot-1.0.beta3.tar.gz) = 180e694ee78b73e69995096e1598cca427f6c87d
 Size (dovecot-1.0.beta3.tar.gz) = 1360574 bytes
 SHA1 (patch-aa) = be37d7ed741930e683028e6ea626aa1d312a328e
-SHA1 (patch-ab) = 4fc3888eb96692e82364295e3aae75f48a042982
+SHA1 (patch-ab) = a96efac8c8fbaf90f2706e5cb4a3288e405d946f
diff --git a/mail/dovecot/patches/patch-ab b/mail/dovecot/patches/patch-ab
index 097bfa9bc25..0c7b94b4cc8 100644
--- a/mail/dovecot/patches/patch-ab
+++ b/mail/dovecot/patches/patch-ab
@@ -1,16 +1,15 @@
-$NetBSD: patch-ab,v 1.9 2006/02/06 17:28:09 ghen Exp $
+$NetBSD: patch-ab,v 1.10 2006/02/10 12:20:56 tv Exp $
 
---- dovecot-example.conf.orig	2006-02-06 16:39:00.000000000 +0100
+--- dovecot-example.conf.orig	2006-02-02 16:31:21.000000000 -0500
 +++ dovecot-example.conf
-@@ -5,17 +5,14 @@
- # value inside quotes, eg.: key = "# char and trailing whitespace  "
+@@ -6,16 +6,14 @@
  
  # Default values are shown after each value, it's not required to uncomment
--# any of the lines. Exception to this are paths, they're just examples
+ # any of the lines. Exception to this are paths, they're just examples
 -# with real defaults being based on configure options. The paths listed here
 -# are for configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var
 -# --with-ssldir=/etc/ssl
-+# any of the lines.
++# with real defaults being based on configure options.
  
  # Base directory where to store runtime data.
  #base_dir = /var/run/dovecot/
@@ -22,7 +21,7 @@ $NetBSD: patch-ab,v 1.9 2006/02/06 17:28:09 ghen Exp $
  
  # IP or host address where to listen in for connections. It's not currently
  # possible to specify multiple addresses. "*" listens in all IPv4 interfaces.
-@@ -31,7 +28,7 @@
+@@ -31,7 +29,7 @@
  #ssl_listen =
  
  # Disable SSL/TLS support.
@@ -31,7 +30,7 @@ $NetBSD: patch-ab,v 1.9 2006/02/06 17:28:09 ghen Exp $
  
  # PEM encoded X.509 SSL/TLS certificate and private key. They're opened before
  # dropping root privileges, so keep the key file unreadable by anyone but
-@@ -420,19 +417,19 @@
+@@ -420,19 +418,19 @@
  
  protocol imap {
    # Login executable location.
@@ -55,7 +54,7 @@ $NetBSD: patch-ab,v 1.9 2006/02/06 17:28:09 ghen Exp $
  
    # Maximum IMAP command line length in bytes. Some clients generate very long
    # command lines with huge mailboxes, so you may need to raise this if you get
-@@ -441,7 +438,7 @@ protocol imap {
+@@ -441,7 +439,7 @@ protocol imap {
  
    # Support for dynamically loadable modules.
    #mail_use_modules = no
@@ -64,7 +63,7 @@ $NetBSD: patch-ab,v 1.9 2006/02/06 17:28:09 ghen Exp $
  
    # Send IMAP capabilities in greeting message. This makes it unnecessary for
    # clients to request it with CAPABILITY command, so it saves one round-trip.
-@@ -481,10 +478,10 @@ protocol imap {
+@@ -481,10 +479,10 @@ protocol imap {
  
  protocol pop3 {
    # Login executable location.
@@ -77,7 +76,7 @@ $NetBSD: patch-ab,v 1.9 2006/02/06 17:28:09 ghen Exp $
  
    # Don't try to set mails non-recent or seen with POP3 sessions. This is
    # mostly intended to reduce disk I/O. With maildir it doesn't move files
-@@ -535,7 +532,7 @@ protocol pop3 {
+@@ -535,7 +533,7 @@ protocol pop3 {
  
    # Support for dynamically loadable modules.
    #mail_use_modules = no
@@ -86,7 +85,7 @@ $NetBSD: patch-ab,v 1.9 2006/02/06 17:28:09 ghen Exp $
  
    # Workarounds for various client bugs:
    #   outlook-no-nuls:
-@@ -553,7 +550,7 @@ protocol pop3 {
+@@ -553,7 +551,7 @@ protocol pop3 {
  ##
  
  # Executable location
@@ -95,7 +94,7 @@ $NetBSD: patch-ab,v 1.9 2006/02/06 17:28:09 ghen Exp $
  
  # Set max. process size in megabytes.
  #auth_process_size = 256
-@@ -642,7 +639,7 @@ auth default {
+@@ -642,7 +640,7 @@ auth default {
    # Note that PAM can only be used to verify if user's password is correct,
    # so it can't be used as userdb. If you don't want to use a separate user
    # database (passwd usually), you can use static userdb.
@@ -104,7 +103,7 @@ $NetBSD: patch-ab,v 1.9 2006/02/06 17:28:09 ghen Exp $
      # [session=yes] [cache_key=<key>] [<service name>]
      #
      # session=yes makes Dovecot open and immediately close PAM session. Some
-@@ -666,13 +663,13 @@ auth default {
+@@ -666,13 +664,13 @@ auth default {
      #   args = session=yes *
      #   args = cache_key=%u dovecot
      #args = dovecot