Initial import of cuecat, a package to support reading and parsing

the output of the CueCat barcode reader under NetBSD.

9 files changed, 228 insertions, 0 deletions

diff --git a/misc/cuecat/Makefile b/misc/cuecat/Makefile
new file mode 100644
index 00000000000..2fd5b3e1626
--- /dev/null
+++ b/misc/cuecat/Makefile
@@ -0,0 +1,24 @@
+# $NetBSD: Makefile,v 1.1.1.1 2001/02/13 13:55:42 wiz Exp $
+#
+
+DISTNAME=	cuecat-0.2.1
+CATEGORIES=	misc
+MASTER_SITES=	ftp://opensource.lineo.com/drivers/ \
+		http://www.flyingbuttmonkeys.com/mirrors/oss.lineo.com/drivers/
+
+MAINTAINER=	wiz@netbsd.org
+HOMEPAGE=	http://opensource.lineo.com/cuecat/cuecat_driver/
+
+NO_SOURCE_ON_FTP=	Hardware manufacturer claims intellectual property infringement.
+NO_SOURCE_ON_CDROM=	${NO_SOURCE_ON_FTP}
+NO_BIN_ON_FTP=		${NO_SOURCE_ON_FTP}
+NO_BIN_ON_FTP=		${NO_SOURCE_ON_FTP}
+
+USE_GMAKE=	yes
+
+do-install:
+	${INSTALL_PROGRAM} ${WRKSRC}/read_cuecat ${PREFIX}/bin
+	${INSTALL_DATA_DIR} ${PREFIX}/share/doc/cuecat
+	${INSTALL_DATA} ${WRKSRC}/README ${PREFIX}/share/doc/cuecat
+
+.include "../../mk/bsd.pkg.mk"
diff --git a/misc/cuecat/files/md5 b/misc/cuecat/files/md5
new file mode 100644
index 00000000000..9fb486fcb4d
--- /dev/null
+++ b/misc/cuecat/files/md5
@@ -0,0 +1,3 @@
+$NetBSD: md5,v 1.1.1.1 2001/02/13 13:55:42 wiz Exp $
+
+MD5 (cuecat-0.2.1.tar.gz) = 828c4d693863b98ee6cc5d5d84647dd5
diff --git a/misc/cuecat/files/patch-sum b/misc/cuecat/files/patch-sum
new file mode 100644
index 00000000000..e7c2989e3a2
--- /dev/null
+++ b/misc/cuecat/files/patch-sum
@@ -0,0 +1,4 @@
+$NetBSD: patch-sum,v 1.1.1.1 2001/02/13 13:55:42 wiz Exp $
+
+MD5 (patch-aa) = a4a411d768c22099c791f906653d0577
+MD5 (patch-ab) = 5682df3e3b9d3630c4870d5ae96e982c
diff --git a/misc/cuecat/patches/patch-aa b/misc/cuecat/patches/patch-aa
new file mode 100644
index 00000000000..b32e53c4baf
--- /dev/null
+++ b/misc/cuecat/patches/patch-aa
@@ -0,0 +1,16 @@
+$NetBSD: patch-aa,v 1.1.1.1 2001/02/13 13:55:42 wiz Exp $
+
+--- Makefile.orig	Mon Sep 18 19:26:03 2000
++++ Makefile
+@@ -1,8 +1,9 @@
+ RM=/bin/rm
+-CC=gcc
++#CC=gcc
+ AR=ar
+-CFLAGS=-Wall -Wstrict-prototypes -O2
++CFLAGS+=-Wall -Wstrict-prototypes
+ 
++all: read_cuecat
+ 
+ 
+ read_cuecat:	read_cuecat.o		\
diff --git a/misc/cuecat/patches/patch-ab b/misc/cuecat/patches/patch-ab
new file mode 100644
index 00000000000..7fd7bc6c13b
--- /dev/null
+++ b/misc/cuecat/patches/patch-ab
@@ -0,0 +1,161 @@
+$NetBSD: patch-ab,v 1.1.1.1 2001/02/13 13:55:42 wiz Exp $
+
+--- read_cuecat.c.orig	Wed Sep 20 22:13:46 2000
++++ read_cuecat.c
+@@ -4,8 +4,8 @@
+ #include <unistd.h>
+ #include <fcntl.h>
+ #include <errno.h>
+-#include <linux/kd.h>
+-#include <linux/serial.h>
++#include <sys/time.h>
++#include <dev/wscons/wsconsio.h>
+ #include <sys/ioctl.h>
+ #include "cuecat_lib.h"
+ #include "cuecat_at2xt.h"
+@@ -24,8 +24,6 @@
+ int previous_kbd_mode;
+ struct termios old_term_settings;
+ struct termios new_term_settings;
+-struct serial_struct old_serinfo;
+-struct serial_struct new_serinfo;
+ char serial_dev_filename[FILENAME_MAX]=DEFAULT_SERIAL_DEV_FILE;
+ char serial;
+ char help;
+@@ -55,6 +53,7 @@
+   char barcode_type[CUECAT_BARCODE_TYPE_LEN+1];
+   char barcode[256];
+   int user_abort=0;
++  int ioctl_arg;
+ 
+   /* Parse the command line parameters */
+   if((invalid_parameter=parse_cmdline(argc,argv)))
+@@ -83,7 +82,7 @@
+   }
+ 
+   /* Get a console or serial port descriptor */
+-  fd=getfd();
++  fd=0;
+ 
+   /* Did the user want to use a serial pod ? */
+   if(!serial)
+@@ -92,9 +91,9 @@
+     printf("Press ESC to end the program ...\n\n");
+ 
+     /* Get the current state of the keyboard */
+-    if (ioctl(fd, KDGKBMODE, &previous_kbd_mode))
++    if (ioctl(fd, WSKBDIO_GETMODE, &previous_kbd_mode))
+     {
+-      perror("KDGKBMODE");
++      perror("WSKBDIO_GETMODE");
+       close(fd);
+       exit(1);
+     }
+@@ -103,11 +102,9 @@
+     printf("The keyboard was in ");
+     switch(previous_kbd_mode)
+     {
+-      case K_RAW:       printf("raw")      ;break;
+-      case K_XLATE:     printf("xlate")    ;break;
+-      case K_MEDIUMRAW: printf("mediumraw");break;
+-      case K_UNICODE:   printf("unicode")  ;break;
+-      default:          printf("unknown")  ;break;
++    case WSKBD_TRANSLATED: printf("translated"); break;
++    case WSKBD_RAW: printf("raw"); break;
++    default: printf("unknown(%d)",previous_kbd_mode); break;
+     }
+     printf(" state.\n\n");
+ 
+@@ -139,9 +136,10 @@
+       close(fd);
+       exit(1);
+     }
+-    if (ioctl(fd,KDSKBMODE,K_RAW))
++    ioctl_arg = WSKBD_RAW;
++    if (ioctl(fd,WSKBDIO_SETMODE,&ioctl_arg))
+     {
+-      perror("KDSKBMODE");
++      perror("WSKBDIO_SETMODE");
+       close(fd);
+       exit(1);
+     }
+@@ -151,13 +149,6 @@
+     /* Give a quick word of advise */
+     printf("Press CTRL-C to end the program ...\n\n");
+ 
+-    /* Get the current state of the serial port */
+-    if(ioctl(fd,TIOCGSERIAL,&old_serinfo))
+-    {
+-      perror("TIOCGSERIAL");
+-      close(fd);
+-      exit(1);
+-    }
+     if(tcgetattr(fd,&old_term_settings)==-1)
+     {
+       perror("tcgetattr");
+@@ -165,28 +156,12 @@
+       exit(1);
+     }
+ 
+-    new_serinfo=old_serinfo;
+     new_term_settings=old_term_settings;
+ 
+     /* Setup the signal handler to trap any signal that might kill us before
+        we can restore the serial port as it was before */
+     setup_signal_handlers();
+ 
+-    /* set SPD_CUST and divisor */
+-    new_serinfo.flags&=~ASYNC_SPD_MASK;
+-    new_serinfo.flags|=ASYNC_SPD_CUST;
+-
+-    /* we measured the cuecat's baudrate  to be about 8000 the closest we can
+-       get to this with a basebaud of 115200 is to use a divisor of 14 */
+-    new_serinfo.custom_divisor=14;
+-
+-    if (ioctl(fd,TIOCSSERIAL,&new_serinfo))
+-    {
+-      perror("TIOCSSERIAL");
+-      close(fd);
+-      exit(1);
+-    }
+-
+     cfmakeraw(&new_term_settings);
+     cfsetospeed(&new_term_settings, B38400);
+ 
+@@ -268,9 +243,9 @@
+ /* Restore the keyboard and console as they where when we started */
+ void restore_console()
+ {
+-  if(ioctl(fd,KDSKBMODE,previous_kbd_mode))
++  if(ioctl(fd,WSKBDIO_SETMODE,&previous_kbd_mode))
+   {
+-    perror("KDSKBMODE");
++    perror("WSKBDIO_SETMODE");
+     close(fd);
+     exit(1);
+   }
+@@ -288,12 +263,6 @@
+ /* Restore the keyboard and console as they where when we started */
+ void restore_serial_port()
+ {
+-  if(ioctl(fd,TIOCSSERIAL,&old_serinfo)==-1)
+-  {
+-    perror("TIOCSSERIAL");
+-    close(fd);
+-    exit(1);
+-  }
+   close(fd);
+ }
+ 
+@@ -361,8 +330,11 @@
+   char arg;
+ 
+   arg=0;
++  return 1;
++#if 0
+   return(ioctl(fd,KDGKBTYPE,&arg)==0
+          && ((arg==KB_101) || (arg==KB_84)));
++#endif
+ }
+ 
+ 
diff --git a/misc/cuecat/pkg/COMMENT b/misc/cuecat/pkg/COMMENT
new file mode 100644
index 00000000000..4f5cd03b4ef
--- /dev/null
+++ b/misc/cuecat/pkg/COMMENT
@@ -0,0 +1 @@
+read and parse barcodes from your CueCat barcode reader
diff --git a/misc/cuecat/pkg/DESCR b/misc/cuecat/pkg/DESCR
new file mode 100644
index 00000000000..c865fab7d39
--- /dev/null
+++ b/misc/cuecat/pkg/DESCR
@@ -0,0 +1,5 @@
+This package contains a hacked version of the Linux program for
+the CueCat (a barcode reader distributed for free in the USA by
+e.g. Radio Shack). This package only works on a console with
+the wscons keyboard driver, and only supports the original CueCat
+(neither the serial nor the USB hack).
diff --git a/misc/cuecat/pkg/MESSAGE b/misc/cuecat/pkg/MESSAGE
new file mode 100644
index 00000000000..ebf09e2838e
--- /dev/null
+++ b/misc/cuecat/pkg/MESSAGE
@@ -0,0 +1,10 @@
+===========================================================================
+$NetBSD: MESSAGE,v 1.1.1.1 2001/02/13 13:55:42 wiz Exp $
+
+Please note that you can only use the executable "read_cuecat"
+on the console.
+
+(The startup error "WSKBDIO_GETMODE: Inappropriate ioctl for device"
+will remind you if you forget.)
+
+===========================================================================
diff --git a/misc/cuecat/pkg/PLIST b/misc/cuecat/pkg/PLIST
new file mode 100644
index 00000000000..7a55da6d95d
--- /dev/null
+++ b/misc/cuecat/pkg/PLIST
@@ -0,0 +1,4 @@
+@comment $NetBSD: PLIST,v 1.1.1.1 2001/02/13 13:55:42 wiz Exp $
+bin/read_cuecat
+share/doc/cuecat/README
+@dirrm share/doc/cuecat