diff options
author | grant <grant> | 2003-06-23 07:41:44 +0000 |
---|---|---|
committer | grant <grant> | 2003-06-23 07:41:44 +0000 |
commit | f77d2c13ba7c0be95ca8120c81d2405bf1ae4a51 (patch) | |
tree | cec7c927cdab5855bc9b35af018f5c8cedec5552 /Packages.txt | |
parent | 6f7e7209bc9d390cd7ca94a36f219e6be0ee7b6f (diff) | |
download | pkgsrc-f77d2c13ba7c0be95ca8120c81d2405bf1ae4a51.tar.gz |
deprecate Packages.txt.
now point users at documentation on the web and provide a copy of the
single file HTML and plain-text output.
Diffstat (limited to 'Packages.txt')
-rw-r--r-- | Packages.txt | 2965 |
1 files changed, 10 insertions, 2955 deletions
diff --git a/Packages.txt b/Packages.txt index 6a4e8ae1fbd..a1b07a5e1d9 100644 --- a/Packages.txt +++ b/Packages.txt @@ -1,2960 +1,15 @@ -# $NetBSD: Packages.txt,v 1.295 2003/06/19 21:41:13 seb Exp $ -########################################################################### +$Id: Packages.txt,v 1.296 2003/06/23 07:41:45 grant Exp $ - ========================== - Documentation on the - NetBSD Package System - ========================== +The pkgsrc documentation now lives on the NetBSD web site. - Hubert Feyrer, Alistair Crooks +Full documentation, one file per chapter: + http://www.NetBSD.org/Documentation/pkgsrc/ +Full documentation in a single file: + http://www.NetBSD.org/Documentation/pkgsrc/pkgsrc.html -Table of contents: -================== +Full documentation in a single plain-text file: + http://www.NetBSD.org/Documentation/pkgsrc/pkgsrc.txt -Run this command to produce a table of contents: - sed '/^.====/{g;p;};h;d' Packages.txt - - - 0 Intro - ======= - -There is a lot of software freely available for Unix based systems, which -usually runs on NetBSD, too, sometimes with some modifications. The NetBSD -packages collection incorporates any such changes necessary to make that -software run on NetBSD, and makes the installation (and re-installation) of -the software package easy by means of a single command. - -The NetBSD package system is used to enable such freely available -third-party software to be built easily on NetBSD hosts. Once the software -has been built, it is manipulated with the pkg_* tools so that installation -and de-installation, printing of an inventory of all installed packages and -retrieval of one-line comments or more verbose descriptions are all simple. - -Both the NetBSD packages collection and the NetBSD package system are -derived from FreeBSD. - - - 0.1 Overview - ============ - -This document is divided into two parts. The first, "User's Guide", -describes how one can use one of the packages in the Package -Collection, either by installing a precompiled binary package, or -by building one's copy using the NetBSD package system. The -second part, "Package Constructor's Guide", explains how to prepare -a package so it can be easily built by other NetBSD users without -knowing about the package's building details. - - - 0.2 Terminology - =============== - -There has been a lot of talk about "ports", "packages", etc. so far. Here -is a description of all the terminology used within this document: - - * Package: - A set of files and building instructions that describe what's necessary - to build a certain piece of software using the NetBSD package - system. Packages are traditionally stored under /usr/pkgsrc. - - * The NetBSD package system: - This is the part of the NetBSD operating system handling building - (compiling), installing, and removing of packages. - - * Distfile: - This term describes the file or files that are provided by the author - of the piece of freely available software to distribute his work. All - the changes necessary to build on NetBSD are reflected in the - corresponding package. Usually the distfile is in the form of a - compressed tar-archive, but other types are possible, too. Distfiles - are stored below /usr/pkgsrc/distfiles. - - * Port: - This is the term used by FreeBSD people for what we call a package. - In NetBSD terminology, "port" refers to a different architecture. - - * Precompiled (binary) package: - A set of binaries built by the NetBSD package system from a distfile - using the NetBSD package system and stuffed together in a single .tgz - file so it can be installed on machines of the same machine architecture - without the need to recompile. Packages are generated in - /usr/pkgsrc/packages by the NetBSD package system; there is also an - archive on ftp.netbsd.org. - - Sometimes, this is referred to by the term "package" too, - especially in the context of precompiled packages. - - * Program: - The piece of software to be installed which will be constructed from - all the files in the Distfile by the actions defined in the - corresponding package. - - * NetBSD RCS IDs: - Some files in a package contain RCS IDs to reflect which version of - that file this is (inserted automatically by cvs). These IDs are used - in several examples within this document, but as this document itself - is managed by CVS, it can't list the RCS IDs in plaintext. Instead, the - $s are written as <$>, resulting in <$>NetBSD<$> and <$>Id<$>. - - - 0.3 Typography - ============== - -Right now this document is written in plain ASCII text, and there's not -much typography applied here. It's being moved to DocBook. - -When giving examples for commands, shell prompts are used to show if the -command should/can be issued as root, or if "normal" user privileges are -sufficient. We use a "#" for root's shell prompt, and a "%" for users' -shell prompt, assuming they use the C-shell or tcsh. - - -==================== -Part I: User's Guide -==================== - - 1 Installing a precompiled binary package - ========================================= - -This section describes how to find, retrieve and install a precompiled -binary package that someone else already prepared for your type of machine. - - - 1.1 Where to get - ================ - -Precompiled packages are stored on ftp.netbsd.org and its mirrors in the -directory /pub/NetBSD/packages for anon FTP access. Please pick the right -subdirectory there as indicated by "uname -p". In that directory, there -is a subdirectory for each category plus a subdirectory "All" which includes -the actual binaries in .tgz-files. The category subdirectories use symbolic -links to those files. (This is the same directory layout as in -/usr/pkgsrc/packages). - -This same directory layout applies for CDROM distributions, only that the -directory may be rooted somewhere else, probably somewhere below /cdrom. -Please consult your CDROM's documentation for the exact location! - - - 1.2 How to use - ============== - -If you have the files on a CDROM or downloaded them to your hard disk, you -can install them with the following command (be sure to su to root first): - - # pkg_add /path/to/package.tgz - -If you have FTP access and you don't want to download the packages via FTP -prior to installation, you can do this automatically by giving pkg_add an -ftp-URL: - - # pkg_add ftp://ftp.netbsd.org/pub/NetBSD/packages/<OS Ver>/<arch>/All/package.tgz - -If there is any doubt, the uname utility can be used to determine the -<OS Ver>, and <arch> by running "uname -rp". - -Also note that any prerequisite packages needed to run the package in -question will be installed, too, assuming they are present where you install -from. - -After you've installed packages, be sure to have /usr/pkg/bin in your $PATH -so you can actually start the just installed program. - - - 1.3 A word of warning - ===================== - -Please pay very careful attention to the warnings expressed in that manual -page about the inherent dangers of installing binary packages which you did -not create yourself, and the security holes that can be introduced onto -your system by indiscriminate adding of such files. - - - 2 Installing by Building - ======================== - -This assumes that the package is already part of the NetBSD package system. -If it is not, then you are advised to read part II of this document, -"Package Constructor's Guide". - - - 2.1 Requirements - ================ - -To build packages from source on a NetBSD system the "comp" and the "text" -distribution sets must be installed. If you want to build X11 related -packages the "xbase" and "xcomp" distribution sets are required, too. - - - 2.2 Where to get pkgsrc - ======================= - -There are three ways to get pkgsrc. Either as a tar file, via SUP, or -via CVS. All three ways are described here. - -To get the package source going, you need to get the pkgsrc.tar.gz file -from ftp://ftp.netbsd.org/pub/NetBSD-current/tar_files/pkgsrc.tar.gz and -unpack it into /usr. - -As an alternative, you can get pkgsrc via the Software Update Protocol, -SUP. To do so, make sure your supfile has a line saying "release=pkgsrc" in -it, see the examples in /usr/share/examples/supfiles, and that the -directory /usr/pkgsrc does exist. Then, simply start "sup -v -/path/to/your/supfile". - -To get pkgsrc via CVS, make sure you have cvs installed. If not present on -your system, it can be found as precompiled binary on ftp.netbsd.org. -To do an initial (full) checkout of pkgsrc, do the following steps: - - % setenv CVSROOT anoncvs@anoncvs.netbsd.org:/cvsroot - % setenv CVS_RSH ssh - % cd /usr - % cvs checkout -P pkgsrc - -This will create the "pkgsrc" directory in your /usr, and all the -package source will be stored under /usr/pkgsrc. To update pkgsrc -after the initial checkout, make sure you have CVS_RSH set as above, -then do: - - % cd /usr/pkgsrc - % cvs -q update -dP - -Please also note that it is possible to have multiple copies of the -pkgsrc hierarchy in use at any one time - all work is done relatively -within the pkgsrc tree. - - - 2.3 Fetching distfiles - ====================== - -There is one gotcha: The distribution file (i.e. the unmodified source) -must exist on your system for the packages system to be able to build it. -If it does not, then ftp(1) is used to fetch the distribution files -automatically. - -You can overwrite some of the major distribution sites to fit to sites -that are close to your own. Have a look at -pkgsrc/mk/bsd.pkg.defaults.mk to find some examples - in particular, -look for the MASTER_SORT, MASTER_SORT_REGEX and INET_COUNTRY -definitions. This may save some of your bandwidth and time. - -You can change these settings either in your shell's environment, or, -if you want to keep the settings, by editing the /etc/mk.conf file, -and adding the definitions there. - -If you don't have a permanent Internet connection and you want to know -which files to download, "make fetch-list" will tell you what you'll need. -Put these distfiles into /usr/pkgsrc/distfiles. - - - 2.4 How to build and install - ============================ - -Assuming that the distfile has been fetched (see previous section), become -root and change into the relevant directory. Then you can type - - % make - -at the shell prompt to build the various components of the package, and - - # make install - -at the shell prompt to install the various components into the correct -places on your system. - -Taking the top system utility as an example, we can install it on our -system by building as shown in appendix A.1. - -The program is installed under the default root of the packages tree - -/usr/pkg. Should this not conform to your tastes, simply set the LOCALBASE -variable in your environment, and it will use that value as the root of -your packages tree. So, to use /usr/local, set - - LOCALBASE=/usr/local - -in your environment. Please note that you should use a root which is -dedicated to packages and not shared with other programs (ie, do not try -and use LOCALBASE=/usr). Also, you should not try to add any of your -own files or directories (such as, for example, src, obj, or pkgsrc) below -the LOCALBASE tree. This is to prevent possible conflicts between programs -and other files installed by the package system and whatever else may have -been installed there. - -There is, of course, one exception to this - X11 packages are traditionally -installed in the X11 tree. The definition used to identify the root of the -X11 tree is the X11BASE definition. - -It is possible to install X11 packages in the LOCALBASE tree, for -which you must install the xpkgwedge package -(pkgsrc/pkgtools/xpkgwedge) - see section 7.1 for further details. - -Some packages look in /etc/mk.conf to alter some configuration options -at build time. Have a look at pkgsrc/mk/bsd.pkg.defaults.mk to -get an overview of what will be set there by default. Environment -variables such as LOCALBASE, and X11BASE can be set in /etc/mk.conf to -save having to remember to set them each time you want to use pkgsrc. - -Occasionally, people want to "look under the covers" to see what is -going on when a package is building or being installed. This may be -for debugging purposes, or out of simple curiosity. A number of utility -values have been added to help with this. - -(1) If you invoke the make(1) command with PKG_DEBUG_LEVEL=2, then a -huge amount of information will be displayed. As a worked example, - - make patch PKG_DEBUG_LEVEL=2 - -will show all the commands that are invoked, up to and including the -"patch stage". - -(2) If you want to know the value of a certain make(1) definition, then -the VARNAME definition should be used, in conjunction with the show-var -target. e.g. - - make show-var VARNAME=DISTFILES - -will show the expansion of the make(1) variable "DISTFILES". - -If you want to de-install and re-install a binary package that you've -created (see next section), that you put into pkgsrc/packages manually or -that's located on a remote FTP server, you can use the the "bin-install" -target. This target will install a binary package - if available - via -pkg_add, and do a "make package" else. The list of remote FTP sites -searched is kept in the variable BINPKG_SITE, which defaults to -ftp.netbsd.org. Any flags that should be added to pkg_add(8) can be put -into BIN_INSTALL_FLAGS. See pkgsrc/mk/bsd.pkg.defaults.mk for more details. - -A final word of warning: If you setup a system that has a non-standard -setting for LOCALBASE (or X11BASE, for that matter), be sure to set that -before any packages are installed, as you can not use several directories -for the same purpose. Doing so will result in pkgsrc not being able to -properly detect your installed packages, and fail miserably. Note also that -precompiled binary packages are usually built with the default LOCALBASE of -/usr/pkg, and that you should *not* install any if you use a non-standard -LOCALBASE. - - - 3 Making precompiled packages - ============================= - - - 3.1 Packaging a single package - ============================== - -Once you have built and installed the package as mentioned above, you can -build it into a "binary package" - you might want to do this so that you -can use the binaries you have just built on another NetBSD system, or to -provide a simple means for others to use your binary package instead of -wasting CPU time - this is done by changing to the appropriate directory in -the pkgsrc tree, and typing the command - - # make package - -at the shell prompt. This will build and install your package (if not -already done), and then construct a binary package out of the results so -that you can use the pkg_* tools to manipulate this. The binary package is -stored under /usr/pkgsrc/packages, it's in the form of a gzipped file at -the present time. See appendix A.2 for a continuation of the above top -example. - -Please see the "submitting" section later in this document on how to submit -such a binary package. - - - 3.2 Doing a bulk build of all packages - ====================================== - -If you want to get a full set of precompiled binary packages, this section -describes how to get them. Beware that the bulk build will remove all -currently installed packages from your your system! Having a FTP server -configured either on the machine doing the bulk builds or on a nearby NFS -server can help to make the packages available to everyone. See ftpd(8) for -more information. If you use a remote NFS server's storage, be sure to not -actually compile on NFS storage, as this slows things down a lot. - - - 3.2.1 Configuration - =================== - - 3.2.1.1 /etc/mk.conf - ==================== - -You may want to set things in /etc/mk.conf. Look at -pkgsrc/mk/bsd.pkg.defaults.mk for details of the default settings. -You will want to make sure that ACCEPTABLE_LICENSES meet your local -policy: - - PACKAGES?= ${_PKGSRCDIR}/packages/${MACHINE_ARCH} - WRKOBJDIR?= /usr/tmp/pkgsrc # build here instead of in pkgsrc - BSDSRCDIR= /usr/src - BSDXSRCDIR= /usr/xsrc # for x11/xservers - OBJHOSTNAME?= yes # use work.`hostname` - FAILOVER_FETCH= yes # insist on the correct checksum - PKG_DEVELOPER?= yes - _ACCEPTABLE= yes - -If you wish to use xpkgwedge for the entire build, then add: - - BULK_PREREQ+= pkgtools/xpkgwedge - -Other packages which must be installed during the bulk build to modify the -build behaviour may be added to the BULK_PREREQ variable. Note that currently -the only package for which BULK_PREREQ makes sense is xpkgwedge. - - 3.2.1.2 build.conf - ================== - -In pkgsrc/mk/bulk, copy ``build.conf-example'' to ``build.conf'' and -edit it, following the comments in that file. This is the config -file that determines where log files are generated after the build, -where to mail the build report, where your pkgsrc is located and -which user to su(8) to to do a 'cvs update'. - - 3.2.1.3 pre-build.local - ======================= - -It is possible to configure the bulk build to perform certain site -specific tasks at the end of the pre-build stage. If the file -``pre-build.local'' exists in pkgsrc/mk/bulk it will be executed -(as a sh(1) script) at the end of the usual pre-build stage. An -example use of pre-build.local is to have the line: - - # echo "I do not have enough disk space to build this pig." \ - > pkgsrc/games/crafty-book-enormous/$BROKENF - -to prevent the system from trying to build a particular package -which requires nearly 3 Gb of disk space. - - 3.2.2 Other environmental considerations - ======================================== - -As /usr/pkg will be completely deleted at the start of bulk builds, -make sure your login shell is placed somewhere else. Either drop it into -/usr/local/bin (and adjust your login shell in the password file), or -(re-)install it via pkg_add from /etc/rc.local, so you can login after a -reboot (remember that your current process won't die if the package is -removed, you just can't start any new instances of the shell any more). -Also, if you use a OS version below 1.5 or you still want to use the -pkgsrc version of ssh for some reason, be sure to install ssh before -starting it from rc.local: - - ( cd /usr/pkgsrc/security/ssh ; make bulk-install ) - if [ -f /usr/pkg/etc/rc.d/sshd ]; then - /usr/pkg/etc/rc.d/sshd - fi - -Not doing so will result in you being not able to log in via ssh -after the bulk build is finished or if the machine gets rebooted -or crashes. You have been warned! :) - - - 3.2.3 Operation - =============== - -Make sure you don't need any of the packages still installed. -BEWARE: During the bulk build, ALL packages will be removed!!! -Be sure to remove all other things that might interfere with builds, like -some libs installed in /usr/local, etc. then become root and type: - - # cd /usr/pkgsrc - # sh mk/bulk/build - -If for some reason your last build didn't complete (power failure, -system panic, ...), you can continue it by running: - - # sh mk/bulk/build restart - -At the end of the bulk run, you will get a summary via mail, and find -build logs in the directory specified by "FTP" in the "build.conf" -file. - - - 3.2.4 What it does - ================== - -The bulk builds consist of three steps: - -1. pre-build: The script updates your pkgsrc via (anon)cvs, then cleans - out any broken distfiles, and removes all packages installed. - -2. the bulk build: This is basically 'make bulk-package' with an optimised - order in which packages will be built. Packages that don't require - other packages will be built first, and packages with many depends - will be built later. - -3. post-build: Generates a report that's placed in the directory specified - in the build.conf file named ``broken.html'', a short version of - that report will also be mailed to the build's admin. - -During the build, a list of broken packages will be compiled in -/usr/pkgsrc/.broken (or .../.broken.${MACHINE} if OBJMACHINE is set), -individual build logs of broken builds can be found in the package's -directory. These files are used by the bulk-targets to mark broken builds -to not waste time trying to rebuild them, and they can be used to debug -these broken package builds later. - - - 3.2.5 Disk space requirements - ============================= - -Currently, roughly the following requirements are valid for -1.5/i386: - - * Distfiles: 1500MB (NFS ok) - * Full set of all binaries: 1000MB (NFS ok) - * Temp space for compiling: 1500MB (local disk recommended) - -For 1.5/alpha: - - * Full set of all binaries: 1300MB (NFS ok) - -Note that all pkgs will be de-installed as soon as they are turned into a -binary package, and that work-sources are removed, so there is no huge -demand to disk space. Afterwards, if the package is needed again, it will -be installed via pkg_add instead of building again, so there are no cycles -wasted by recompiling. - - - 3.2.6 Setting up a sandbox for chroot'ed builds - =============================================== - -If you don't want all the pkgs nuked from a machine (rendering it useless -for anything but pkg compiling), there is the possibility of doing the pkg -bulk build inside a chroot environment. - -The first step to do so is setting up a chroot sandbox, e.g. /usr/sandbox. -After extracting all the sets from a NetBSD installation or doing a -"make distribution DESTDIR=/usr/sandbox" in src/etc, make sure the following -items are present and properly configured: - - * kernel: - cp /netbsd /usr/sandbox - * /dev/*: - cd /usr/sandbox/dev ; sh MAKEDEV all - * /etc/resolv.conf (for security/smtpd and mail): - cp /etc/resolv.conf /usr/sandbox/etc - * working(!) mail config (hostname, sendmail.cf): - cp /etc/mail/sendmail.cf /usr/sandbox/etc/mail - * /etc/localtime (for security/smtpd): - ln -sf /usr/share/zoneinfo/GMT /usr/sandbox/etc/localtime - * /usr/src (system sources, for sysutils/aperture, net/ppp-mppe): - ln -s ../disk1/cvs . - ln -s cvs/src-1.6 src - ln -s cvs/pkgsrc . - * create /var/db/pkg (not part of default install): - mkdir /usr/sandbox/var/db/pkg - * create /usr/pkg (not part of default install) - mkdir /usr/sandbox/usr/pkg - * checkout pkgsrc from cvs, into /usr/sandbox/usr/pkgsrc - cvs -d cvs.netbsd.org:/cvsroot co pkgsrc - * /usr/pkgsrc/packages & .../distfiles (point outside of sandbox) - * /etc/mk.conf, see 3.2.1.1 - * adjust .../mk/bulk/build.conf - -!!! Don't forget to install X !!! -If you are a developer and want to upload the resulting binary packages -to ftp.netbsd.org, make sure you are using the default X version for your -architecture and release (up to 1.6, that is 3.3.6 for all architectures). - -Next thing you will want to is make sure /usr/sandbox/usr/pkgsrc contains a -fresh checkout of pkgsrc (e.g. from anoncvs). Do not mount/link this to the -copy of your pkgsrc tree you do development in, as this will likely cause -problems! Adjust .../pkgsrc/packages and .../pkgsrc/distfiles to point to -some places outside the sandbox if you want to make the files public. - -Then, configure .../pkgsrc/mk/bulk/build.conf to fit your needs! - -When the chroot sandbox is setup, you can start the build with the following -steps: - - # cd /usr/sandbox/usr/pkgsrc - # sh mk/bulk/do-sandbox-build - -This will just jump inside the sandbox and start thrash^Wbuilding. -At the end of the build, mail will be sent with the results of the build. -Created binary pkgs will be in /usr/sandbox/usr/pkgsrc/packages (wherever -that points/mounts to/from). - - - 3.3 Creating a multiple CD-ROM packages collection - ================================================== - -After your bulk pkgsrc build has completed, you may wish to create a CD-ROM -set of the resulting binary packages to assist in installing packages on -other machines. The package pkgsrc/pkgtools/cdpack provides a simple tool for -creating the ISO 9660 images. `cdpack' arranges the packages on the CD-ROM's -in a way that keeps all the dependencies for given package on the same -CD as that package. - - - 3.3.1 Example of cdpack - ======================= - -Complete documentation for cdpack is found in cdpack(1). The following -short example assumes that the binary packages are left in -/usr/pkgsrc/packages/All and that sufficient disk space exists in /u2 -to hold the ISO 9660 images. - - # mkdir /u2/images - # pkg_add /usr/pkgsrc/packages/All/cdpack - # cdpack /usr/pkgsrc/packages/All /u2/images - -If you wish to include a common set of files (COPYRIGHT, README, etc) -on each CD in the collection, then you need to create a directory which -contains these files. For example - - # mkdir /tmp/common - # echo "This is a README" > /tmp/common/README - # echo "Another file" > /tmp/common/COPYING - # mkdir /tmp/common/bin - # echo "#!/bin/sh" > /tmp/common/bin/myscript - # echo "echo Hello world" >> /tmp/common/bin/myscript - # chmod 755 /tmp/common/bin/myscript - -Now create the images with - - # cdpack -x /tmp/common /usr/pkgsrc/packages/All /u2/images - -and each image will contain "README", "COPYING", and "bin/myscript" -in their root directories. - - -==================================== -Part II: Package Constructor's Guide -==================================== - - 4 Package components - files, directories and contents - ====================================================== - -Whenever you're preparing a package, there are a number of files involved -which are described in the following sections. - - - 4.1 Makefile - ============ - -Building, installation and creation of a binary package are all controlled -by the package's Makefile. - -There is a Makefile for each package. This file includes the standard -bsd.pkg.mk file (referenced as "../../mk/bsd.pkg.mk"), which sets all the -definitions and actions necessary for the package to compile and install -itself. The mandatory fields are the DISTNAME which specifies the base name -of the distribution file to be downloaded from the site on the Internet, -MASTER_SITES which specifies that site, CATEGORIES which denotes the -categories into which the package falls, PKGNAME which is the name of the -package, the MAINTAINER name, and the COMMENT variable, which should -contain a one-line description of the package (the package name should not -appear, it will be added automatically). The maintainer variable is there -so that anyone who quibbles with the (always completely correct) decisions -taken by the guy who maintains the port can complain vigorously. - -The MASTER_SITES may be set to one of the predefined sites: - - ${MASTER_SITE_APACHE} - ${MASTER_SITE_DEBIAN} - ${MASTER_SITE_GNOME} - ${MASTER_SITE_GNU} - ${MASTER_SITE_GNUSTEP} - ${MASTER_SITE_MOZILLA} - ${MASTER_SITE_PERL_CPAN} - ${MASTER_SITE_SOURCEFORGE} - ${MASTER_SITE_SUNSITE} - ${MASTER_SITE_R_CRAN} - ${MASTER_SITE_SUSE} - ${MASTER_SITE_TEX_CTAN} - ${MASTER_SITE_XCONTRIB} - ${MASTER_SITE_XEMACS} - -If one of these predefined sites is chosen, you may require the ability to -specify a subdirectory of that site. Since these macros may expand to -more than one actual site, you MUST use the following construct to specify -a subdirectory: - - ${MASTER_SITE_GNU:=subdirectory/name/} - -(Note the trailing slash after the subdirectory name.) Use of the deprecated -MASTER_SITE_SUBDIR will not work. - -If the package has multiple DISTFILES or multiple PATCHFILES from different -sites, set SITES_foo to a list of URI's where file "foo" may be found. "foo" -includes the suffix, e.g. - - DISTFILES=${DISTNAME}${EXTRACT_SUFX} - DISTFILES+=foo-file.tar.gz - SITES_foo-file.tar.gz=http://www.somewhere.com/somehow/ \ - http://www.somewhereelse.com/mirror/somehow/ - -Note, that the normal default setting of DISTFILES must be made explicit -if you want to add to it (rather than replace it), as you usually would. - -Currently the following values are available for CATEGORIES. If more than -one is used, they need to be separated by spaces: - - archivers audio benchmarks biology cad - chat comms converters cross databases - devel editors emulators finance fonts - games graphics ham japanese lang - mail math mbone misc net - news parallel print security shells - sysutils textproc time wm www - x11 - -See the NetBSD packages(7) manual page for a description of all available -options and variables. - -Please pay attention to the following gotchas: - - - Add MANCOMPRESSED (if not already there) if manpages are installed in - compressed form by the package; see comment in bsd.pkg.mk - - Replace /usr/local by ${PREFIX} in all files (see patches below) - - If the package installs any info files, see the section `Packages providing - info files' in this document. - - Adjust MAINTAINER to be either yourself, if you plan to maintain the - package for future updates, or set it to the default MAINTAINER - packages@netbsd.org. - - If there exists a home page for the software in question, please - add the variable HOMEPAGE right after MAINTAINER. The value of this - variable should be the URL for the home page. - - Please also set the COMMENT variable to a short description of the - package. - - - 4.2 distinfo - ============ - -Most important, the mandatory message digest, or checksum, of all the -distfiles needed for the package to compile, confirming they match the -original file distributed by the author. This ensures that the -distfile retrieved from the Internet has not been corrupted during -transfer or altered by a malign force to introduce a security hole. -It is best generated using the "make makesum" command. The digest -algorithm used was, at one stage, md5, but that was felt lacking -compared to sha1, and so sha1 is now the default algorithm. The -distfile size is also generated and stored in new distinfo files. -The pkgsrc/pkgtools/digest utility calculates all of the digests -in the distinfo file, and it provides various different algorithms. -At the current time, the algorithms provided are: - - md5, rmd160, sha1, sha256, sha384 and sha512 - -Some packages have different sets of distfiles on a per architecture -basis. (A good example is pkgsrc/www/navigator). These are kept in the -same distinfo file and care should be taken when upgrading such a -package to ensure distfile information is not lost. - -The message digest/checksum for all the official patches found in the -patches/ directory (see section 4.3) for the package is also stored in -the distinfo file. This is a message digest/checksum of all lines in -the patch file except the NetBSD RCS Id. This file is generated by -invoking "make makepatchsum". - - - 4.3 patches/* - ============= - -This directory contains files that are used by the patch(1) command to -modify the sources as distributed in the distribution file into a form that -will compile and run perfectly on NetBSD. The files are applied -successively in alphabetic order (as returned by a shell "patches/patch-*" -glob expansion), so patch-aa is applied before patch-ab etc. - -The patch-?? files should be in "diff -bu" format, and apply without -a fuzz to avoid problems (To force patches to apply with fuzz you -can set PATCH_FUZZ_FACTOR=-F2). Furthermore, do not put changes -for more than one file into a single patch-file, as this will make -future modifications more difficult. - -Similar, a file should be patched at most once, not several times by -several different patches. If a file needs several patches, they should -be combined into one file. - -One important thing to mention is to pay attention that no RCS IDs -get stored in the patch files, as these will cause problems when -later checked into the NetBSD CVS tree. To avoid this, use either -the "-U 2" or "-U 1" option to diff, or let the 'pkgdiff' command -from pkgsrc/pkgtools/pkgdiff help you. - -If you don't want to worry about the problems in the last two paragraphs -yourself, use pkgdiff from the pkgsrc/pkgtools/pkgdiff package, which takes -care of any RCS Ids by itself. - -For even more automation, we recommend using mkpatches from the same -package to make a whole set of patches. You just have to backup files -before you edit them to "filename.orig", e.g. with "cp -p filename -filename.orig" or, easier, by using pkgvi from the same package. If you -upgrade a package this way, you can easily compare the new set of patches -with the previously existing one with patchdiff. - -When you have finished a package, remember to generate the checksums -for the patch files by using the "make makepatchsum" command, see -section 4.2. - -If it is desired to store any patches that should not be committed into -pkgsrc, they can be kept outside the pkgsrc tree in the $LOCALPATCHES -directory. The directory tree there is expected to have the same -"category/package" structure as pkgsrc, and patches are expected to be -stored inside these dirs (also known as $LOCALPATCHES/$PKGPATH). For -example if you want to keep a private patch for pkgsrc/graphics/png, keep -it in $LOCALPATCHES/graphics/png/mypatch. All files in the named directory -are expected to be patch files, and they are applied after the "normal" -pkgsrc patches are applied. - - - 4.4 Other mandatory files - ========================= - - * DESCR: - A multi-line description of the piece of software. This should include - any credits where they are due. Please bear in mind that others do not - share your sense of humour (or spelling idiosyncrasies), and that others - will read everything that you write here. - - * PLIST: - This file governs the files that are installed on your system: all the - binaries, manual pages, etc. There are other directives which may be - entered in this file, to control the creation and deletion of - directories, and the location of inserted files. - - - 4.5 Optional files - ================== - - * INSTALL: - Shell script invoked twice during pkg_add. First time after package - extraction and before files are moved in place, the second time after - the files to install are moved in place. This can be used to do any - custom procedures not possible with @exec commands in PLIST. See - pkg_add(1) and pkg_create(1) for more information. - - * DEINSTALL: - This script is executed before and after any files are removed. It is - this script's responsibility to clean up any additional messy details - around the package's installation, since all pkg_delete knows is how to - delete the files created in the original distribution. See pkg_delete(1) - and pkg_create(1) for more information. - - * MESSAGE: - Display this file after installation of the package. - Useful for things like legal notices on almost-free software, etc. - Please note that you can modify variables in it easily by using - MESSAGE_SUBST in the package's Makefile: - - MESSAGE_SUBST+= SOMEVAR="somevalue" - - replaces - - ${SOMEVAR} - - in MESSAGE with "somevalue" before displaying the message. - - - 4.6 work/* - ========== - -When you type "make" the distribution files are unpacked into this -directory. It can be removed by typing - - # make clean - -at the shell prompt. Also, this directory is used to keep various -timestamp files. - - - 4.7 files/* - =========== - -If you have any files that you wish to be placed in the package prior -to configuration or building, you could place these files here and use -a ${CP} command in the pre-configure target to achieve this. -Alternatively, you could simply diff the file against /dev/null and -use the patch mechanism to manage the creation of this file. - - - 5 PLIST* issues - =============== - -This section addresses some special issues that one needs to pay attention -to when dealing with the PLIST file (or files, see below!). - - - 5.1 Miscellaneous - ================= - - * NetBSD RCS Id: - Be sure to add a RCS ID line as the first thing in any PLIST file you - write: - - @comment <$>NetBSD<$> - - * ${MACHINE_ARCH}, ${MACHINE_GNU_ARCH}: - Some packages like emacs and perl embed information about which - architecture they were built on into the pathnames where they install - their file. To handle this case, PLIST will be preprocessed before - actually used, and the symbol "${MACHINE_ARCH}" will be replaced by - what "uname -p" gives. The same is done if the string ${MACHINE_GNU_ARCH} - is embedded in PLIST somewhere - use this on packages that have GNU - autoconf created configure scripts. - - Legacy note: There used to be a symbol "<$ARCH>" that was replaced by - the output of "uname -m", but that's no longer supported and has been - removed. - - * ${OPSYS}, ${LOWER_OPSYS}, ${OS_VERSION}: - Some packages want to embed the OS name and version into some paths. - To do this, use these variables in the PLIST: - - * ${OPSYS} - output of "uname -s" - * ${LOWER_OPSYS} - lowercase common name (eg. "solaris") - * ${OS_VERSION} - "uname -r" - - * ${PKGLOCALEDIR}: - Packages that install locale files should list them in the PLIST as - "${PKGLOCALEDIR}/locale/de/LC_MESSAGES/..." instead of - "share/locale/de/LC_MESSAGES/...". This properly handles the fact that - different OSes expect locale files to be either in "share" or "lib" by - default. - - * Manpage-compression: - Manpages should be installed in compressed form if MANZ is set (in - bsd.own.mk), and uncompressed otherwise. To handle this in the PLIST - file, the suffix ".gz" is appended/removed automatically for manpages - according to MANZ and MANCOMPRESSED being set or not, see above for - details. This modification of the PLIST file is done on a copy of it, - not PLIST itself. - - * Platform specific and differing PLISTs: - Some packages decide to install a different set of files based on - the operating system being used. These differences can be - automatically handled by using the following files: - - * PLIST.common - * PLIST.${OPSYS} - * PLIST.common_end - - If PLIST.${OPSYS} exists, these files are used instead of PLIST. This - allows packages which behave in this way to be handled gracefully. - Manually overriding PLIST_SRC for other more exotic uses is also - possible. - - * Semi-automatic PLIST generation: - You can use the "make print-PLIST" command to output a PLIST that matches - any new files since the package was extracted. See below for more - information on this target. - - - 5.2 ${PLIST_SRC} - ================ - -To use one or more files as source for the PLIST used in generating the -binary package, set the variable PLIST_SRC to the names of that file(s). -The files are later concatenated using cat(1), and order of things is -important. - - 5.3 ${PLIST_SUBST} - ================== - -Similar to MESSAGE_SUBST (see above), you can add variables and their -expansions to this variable in the following way: - - PLIST_SUBST+= SOMEVAR="somevalue" - -which replaces all occurrences of ${SOMEVAR} in the PLIST with "somevalue". -For the values which are replaced by default, please look in bsd.pkg.mk -(and search for PLIST_SUBST). - - 5.4 Perl5 modules - ================= - -Makefile of packages providing perl5 modules should include the -makefile fragment lang/perl5/module.mk. It provides a do-configure -target for the standard perl configuration for such modules as well -as various hooks to tune this configuration. See comments in this -file for details. - -Perl5 modules will install into different places depending on the version -of perl used during the build process. To address this, the NetBSD -packages system will append lines to the PLIST corresponding to the files -listed in the installed .packlist file generated by most perl5 modules. -This is invoked by defining PERL5_PACKLIST to a space-separated list of -paths to packlist files: - - PERL5_PACKLIST= ${PERL5_SITEARCH}/auto/Pg/.packlist - -The variables PERL5_SITELIB, PERL5_SITEARCH, and PERL5_ARCHLIB represent -the three locations in which perl5 modules may be installed, and may be -used by perl5 packages that don't have a packlist. These three variables -are also substituted for in the PLIST. - - 5.5 User Interaction - ==================== - -Occasionally, packages require interaction from the user, and this can be -in a number of ways: - -+ help in fetching the distfiles -+ help to configure the package before it is built -+ help during the build process -+ help during the installation of a package - -The INTERACTIVE_STAGE definition is provided, to notify the pkgsrc mechanism -of an interactive stage which will be needed, and this should be set in the -package's Makefile. e.g. - -INTERACTIVE_STAGE= build - -Multiple interactive stages can be specified: - -INTERACTIVE_STAGE= configure install - - - 6 Notes on fixes for packages - ============================= - - 6.1 CPP defines - =============== - -To port an application to NetBSD, it's usually necessary for the compiler -to be able to judge the system on which it's compiling, and we use -definitions so that the C pre-processor can do this. - -To test whether you are working on a 4.4 BSD-derived system, you should use -the BSD definition, which is defined in <sys/param.h> on said systems. - - #include <sys/param.h> - -and then you can surround the BSD-specific parts of your port using the -conditional: - - #if (defined(BSD) && BSD >= 199306) - ... - #endif - -Please use the __NetBSD__ definition sparingly - it should only apply to -features of NetBSD that are not present in other 4.4-lite derived BSDs. - - 6.2 Shared libraries - libtool - ============================== - -Pkgsrc supports many different machines, with different object formats -like a.out and ELF, and varying abilities to do shared library and -dynamic loading at all. To accompany this, varying commands and options -have to be passed to the compiler, linker etc. to get the Right Thing, -which can be pretty annoying especially if you don't have all the -machines at your hand to test things. The "libtool" pkg can help -here, as it just "knows" how to build both static and dynamic -libraries from a set of source files, thus being platform -independent. - -Here's how to use libtool in a pkg in seven simple steps: - -1. Add USE_LIBTOOL= yes to the package Makefile. - -2. For library objects, use "${LIBTOOL} --mode=compile ${CC}" in place of - ${CC}. You could even add it to the definition of CC, if only - libraries are being built in a given Makefile. This one command will - build both PIC and non-PIC library objects, so you need not have - separate shared and non-shared library rules. - -3. For the linking of the library, remove any "ar", "ranlib", and "ld - -Bshareable" commands, and use instead: - - ${LIBTOOL} --mode=link ${CC} -o ${.TARGET:.a=.la} ${OBJS:.o=.lo} -rpath ${PREFIX}/lib -version-info major:minor - - Note that the library is changed to have a .la extension, and the - objects are changed to have a .lo extension. Change OBJS as necessary. - This automatically creates all of the .a, .so.major.minor, and ELF - symlinks (if necessary) in the build directory. Be sure to include - the -version-info especially when major and minor are zero, as libtool - will otherwise strip off the shared library version. - - The "-release" option will produce different results for a.out and ELF - (excluding symlinks) in only one case. An ELF library of the form - libfoo-release.so.x.y will have a symlink of libfoo.so.x.y on an a.out - platform. This is handled automatically. - - The -rpath argument is the install directory of the library being built. - - PLIST should include all of the .a, .la and so, .so.major and - .so.major.minor entries. - -4. When linking shared object (.so) files, i.e. files that are loaded via - dlopen(3), NOT shared libraries, use "-module -avoid-version" to prevent - them getting version tacked on. - - PLIST gets the foo.so entry. - -5. When linking programs that depend on these libraries _before_ they are - installed, preface the cc or ld line with "${LIBTOOL} --mode=link", and - it will find the correct libraries (static or shared), but please be - aware that libtool will not allow you to specify a relative path in -L - (such as -L../somelib), because it expects you to change that argument - to be the .la file. For example: - - ${LIBTOOL} --mode=link ${CC} -o someprog -L../somelib -lsomelib - - should be changed to: - - ${LIBTOOL} --mode=link ${CC} -o someprog ../somelib/somelib.la - - and it will DTRT with the libraries. - -6. When installing libraries, preface the install or cp command with - "${LIBTOOL} --mode=install", and change the library name to .la. For - example: - - ${LIBTOOL} --mode=install ${BSD_INSTALL_DATA} ${SOMELIB:.a=.la} ${PREFIX}/lib - - This will install the static .a, shared library, any needed symlinks, - and run "ldconfig." - -7. In your PLIST, include all of the .a, .la, and so, .so.major and - .so.major.minor files (this is a change from the previous behaviour). - - - 6.3 Using libtool on GNU packages that already support libtool - ============================================================== - -Add USE_LIBTOOL=yes and LIBTOOL_OVERRIDE=${WRKSRC}/libtool to the -package Makefile as the quick way to bypass the pkg's own libtool. -For older libtool using packages, libtool is made by ltconfig script -during the do-configure step; you can check the libtool script -location by doing "make configure; find work*/ -name libtool". - -If your package makes use of the platform independent library for loading -dynamic shared objects, that comes with libtool (libltdl), you should -include the libtool buildlink2.mk (and set USE_BUILDLINK2 to YES). - -Some packages use libtool incorrectly so that the package may not work or -build in some circumstances. Some common errors are - - * The inclusion of a shared object (-module) as a dependent library in an - executable or library. This in itself isn't a problem if one of two things - has been done. - - 1. The shared object is named correctly, i.e. libfoo.la and not foo.la - - 2. The -dlopen option is used when linking an executable. - - * The use of libltdl without the correct calls to initialisation routines. - The function lt_dlinit() should be called and the macro - LTDL_SET_PRELOADED_SYMBOLS included in executables. - - - 6.4 GNU Autoconf/Automake - ========================= - -If a package needs GNU autoconf or automake to be executed to regenerate -the configure script and Makefile.in makefile templates, then they should -be executed in a pre-configure target. Two makefile fragments are provided -in pkgsrc/mk/autoconf.mk and pkgsrc/mk/automake.mk to help dealing with -these tools. See comments in these files for details. - -For packages that need only autoconf: - - AUTOCONF_REQD= 2.50 # if default version is not good enough - ... - - pre-configure: - cd ${WRKSRC}; ${AUTOCONF} - - ... - .include "../../mk/autoconf.mk" - -and for packages that need automake and autoconf: - - AUTOMAKE_REQD= 1.7.1 # if default version is not good enough - ... - - pre-configure: - cd ${WRKSRC}; \ - ${ACLOCAL}; \ - ${AUTOHEADER}; \ - ${AUTOMAKE} -a --foreign -i; \ - ${AUTOCONF} - - ... - .include "../mk/automake.mk" - -There are times when the configure process makes additional changes to the -generated files, which then causes the build process to try to re-execute -the automake sequence. This is prevented by touching various files in -the configure stage. If this causes problems with your package you can set -AUTOMAKE_OVERRIDE to NO in the package Makefile. - - - 6.5 Package configuration files - =============================== - -Packages should be taught to look for their configuration files in -${PKG_SYSCONFDIR}, which is passed through to the configure and build -processes. PKG_SYSCONFDIR may be customized in various ways by setting -other make variables: - -* PKG_SYSCONFBASE is the main config directory under which all package - configuration files are to be found. This defaults to ${PREFIX}/etc, but - may be overridden in /etc/mk.conf. - -* PKG_SYSCONFSUBDIR is the subdirectory of PKG_SYSCONFBASE under which the - configuration files for a particular package may be found, e.g. the - Apache configuration files may all be found under the "httpd" subdirectory - of ${PKG_SYSCONFBASE}. This is meant to be set in a package Makefile. - -* By default PKG_SYSCONFDIR=${PKG_SYSCONFBASE}/${PKG_SYSCONFSUBDIR}, but - the default may be overridden by setting PKG_SYSCONFDIR.${PKG_SYSCONFVAR} - for a particular package, where PKG_SYSCONFVAR defaults to ${PKGBASE}. - This is not meant to be set by a package Makefile, but is reserved for - users who wish to override the PKG_SYSCONFDIR setting for a particular - package with a special location. - -The only variables that users should customize are PKG_SYSCONFBASE and -PKG_SYSCONFDIR.${PKG_SYSCONFVAR}. Users will typically want to set -PKG_SYSCONFBASE to /etc, or to accept the default location of ${PREFIX}/etc. - - - 6.6 Feedback to the author - ========================== - -If you have found any bugs in the package you make available, if you had to -do special steps to make it run under NetBSD or if you enhanced the software -in various other ways, be sure to report these changes back to the original -author of the program! With that kind of support, the next release of the -program can incorporate these fixes, and people not using the NetBSD packages -system can win from your efforts. - -Support the idea of free software! - - - 7 The build process - =================== - -The basic steps for building a program are always the same. First the -program's source (distfile) must be brought to the local system and -then extracted. After any patches to compile properly on NetBSD are -applied, the software can be configured, then built (usually by -compiling), and finally the generated binaries etc. can be put into -place on the system. These are exactly the steps performed by the -NetBSD package system, which is implemented as a series of targets in -a central Makefile, pkgsrc/mk/bsd.pkg.mk. - - - 7.1 Program location - ==================== - -Before outlining the process performed by the NetBSD package system in the -next section, here's a brief discussion on where programs are installed, -and which variables influence this. - -The automatic variable PREFIX indicates where all files of the final -program shall be installed. It is usually set to $LOCALBASE (/usr/pkg), -or $CROSSBASE for pkgs in the "cross" category, though its value becomes -that of $X11BASE if USE_IMAKE or USE_X11BASE is set. The value ${PREFIX} -needs to be put into the various places in the program's source where paths -to these files are encoded; see sections 4.3 and 6.2 for details on this. - -When choosing which of these variables to use, follow the following rules: - - * ${PREFIX} always points to the location where the current pkg will be - installed. When referring to a pkg's own installation path, use ${PREFIX}. - - * ${LOCALBASE} is where all non-X11 pkgs are installed. If you need to - construct a -I or -L argument to the compiler to find includes and - libraries installed by another non-X11 pkg, use ${LOCALBASE}. - - * ${X11BASE} is where the actual X11 distribution (from xsrc etc.) is installed. - When looking for _standard_ X11 includes (not those installed by a pkg), use - ${X11BASE}. - - * X11 based pkgs are special in that they may be installed in either - X11BASE or LOCALBASE. To install X11 packages in LOCALBASE, simply - install the xpkgwedge package (pkgsrc/pkgtools/xpkgwedge). - If you need to find includes or libraries installed by a pkg that has - USE_IMAKE or USE_X11BASE in its pkg Makefile, you need to use _both_ - ${X11BASE} and ${LOCALBASE}. - - * ${X11PREFIX} should be used to refer to the installed location of an X11 - package. X11PREFIX will be set to ${X11BASE} if xpkgwedge is not installed, - and to ${LOCALBASE} if xpkgwedge is installed. - - * If xpkgwedge is installed, it is possible to have some packages installed in - X11BASE and some in LOCALBASE. To determine the prefix of an installed - package, the EVAL_PREFIX definition can be used. It takes pairs in the - format DIRNAME=<package>, and the make(1) variable DIRNAME will be set - to the prefix of the installed package <package>, or ${X11PREFIX} if the - package is not installed. - - This is best illustrated by example. - - The following lines are taken from pkgsrc/wm/scwm/Makefile: - - EVAL_PREFIX+= GTKDIR=gtk+ - CONFIGURE_ARGS+= --with-guile-prefix=${LOCALBASE} \ - --with-gtk-prefix="${GTKDIR}" \ - --enable-multibyte - - Specific defaults can be defined for the packages evaluated using - EVAL_PREFIX, by using a definition of the form: - - GTKDIR_DEFAULT= ${LOCALBASE} - - where "GTKDIR" corresponds to the first definition in the EVAL_PREFIX pair. - - 7.2 Main targets - ================ - -The main targets used during the build process defined in bsd.pkg.mk are: - - * fetch: - This will check if the file(s) given in the variables DISTFILES and - PATCHFILES (as defined in the package's Makefile) are present on the - local system in /usr/pkgsrc/distfiles. If they are not present, an - attempt will be made to fetch them using commands of the form - - ${FETCH_CMD} ${FETCH_BEFORE_ARGS} ${site}${file} ${FETCH_AFTER_ARGS} - - where ${site} varies through several possibilities in turn: first, - ${MASTER_SITE_OVERRIDE} is tried, then the sites specified in either - ${SITES_file}, if defined, else ${MASTER_SITES} or ${PATCH_SITES}, as - applies, then finally the value of ${MASTER_SITE_BACKUP}. The order of - all except the first can be optionally sorted by the user, via setting - either ${MASTER_SORT_AWK} or ${MASTER_SORT_REGEX}. - - * checksum: - After the distfile(s) are fetched, their checksum is generated and - compared with the checksums stored in the distinfo file. If the - checksums don't match, the build is aborted. This is to ensure the same - distfile is used for building, and that the distfile wasn't changed, - e.g. by some malign force, deliberately changed distfiles on the master - distribution site or network lossage. - - * extract: - When the distfiles are present on the local system, they need to be - extracted, as they are usually in the form of some compressed archive - format, most commonly .tar.gz. If only some of the distfiles need to be - uncompressed, the files to be uncompressed should be put into - EXTRACT_ONLY. If the distfiles are not in .tar.gz format, they can be - extracted by setting EXTRACT_CMD. - - * patch: - After extraction, all the patches named by the PATCHFILES, those present - in the patches subdirectory of the package as well as in - $LOCALPATCHES/$PKGPATH (e.g. /usr/local/patches/graphics/png) are - applied. Patchfiles ending in .Z or .gz are uncompressed before they are - applied, files ending in .orig or .rej are ignored. Any special options - to patch(1) can be handed in PATCH_DIST_ARGS. See section 4.3 for more - details. - - By default patch is given special args to make it fail if the - patches with some lines of fuzz. Please fix (regen) the patches - so that they apply cleanly. The rationale behind this is that - patches that apply cleanly may end up being applied in the wrong - place, and cause severe harm there. - - * configure: - Most pieces of software need information on the header files, - system calls, and library routines which are available in NetBSD. - This is the process known as configuration, and is usually - automated. In most cases, a script is supplied with the source, - and its invocation results in generation of header files, - Makefiles, etc. - - If the program's distfile contains its own configure script, this can - be invoked by setting HAS_CONFIGURE. If the configure script is a GNU - autoconf script, GNU_CONFIGURE should be specified instead. In either - case, any arguments to the configure script can be specified in the - CONFIGURE_ARGS variable, and the configure script's name can be set in - CONFIGURE_SCRIPT if it differs from the default "configure". - - If the program uses an Imakefile for configuration, the appropriate - steps can be invoked by setting USE_IMAKE to YES. (If you only want the - package installed in $X11PREFIX but xmkmf not being run, set USE_X11BASE - instead!) - - * build: - Once configuration has taken place, the software can be built on - NetBSD by invoking $MAKE_PROGRAM on $MAKEFILE with $ALL_TARGET as - the target to build. The default MAKE_PROGRAM is "gmake" if - USE_GMAKE is set, "make" otherwise. MAKEFILE is set to "Makefile" - by default, and ALL_TARGET defaults to "all". Any of these - variables can be set to change the default build process. - - * install: - Once the build stage has completed, the final step is to install - the software in public directories, for users. As in the - build-target, $MAKE_PROGRAM is invoked on $MAKEFILE here, but with - the $INSTALL_TARGET instead, the latter defaulting to "install" - (plus "install.man", if USE_IMAKE is set). - -If no target is specified, the default is "build". If a subsequent stage -is requested, all prior stages are made: e.g. "make build" will also -perform the equivalent of: - - make fetch - make checksum - make extract - make patch - make configure - make build - - - 7.3 Other helpful targets - ========================= - - * pre/post-* - For any of the main targets described in the previous section, two - auxiliary targets exist with "pre-" and "post-" used as a prefix - for the main target's name. These targets are invoked before and - after the main target is called, allowing extra configuration or - installation steps, for example, which program's configure script - or install target omitted. - - * do-*: - Should one of the main targets do the wrong thing, and should there - be no variable to fix this, you can redefine it with the do-* - target. (Note that redefining the target itself instead of the - do-* target is a bad idea, as the pre-* and post-* targets won't be - called anymore, etc.) You will not usually need to do this. - - * reinstall: - If you did a "make install" and you noticed some file was not installed - properly, you can repeat the installation with this target, which will - ignore the "already installed" flag. - - * deinstall: - This target does a pkg_delete(1) in the current directory, - effectively de-installing the package. The following variables can - be used either on the command line or in /etc/mk.conf to tune the - behaviour: - - - PKG_VERBOSE: - Add a "-v" to the pkg_delete(1) command. - - - DEINSTALLDEPENDS: - Remove all packages that require (depend on) the given package. - This can be used to remove any packages that may have been pulled in - by a given package, e.g. if "make deinstall DEINSTALLDEPENDS=1" is - done in pkgsrc/x11/kde, this is likely to remove whole KDE. Works by - adding a "-R" to the pkg_delete command line. - - * update: - This target causes the current package to be updated to the latest - version. The package and all depending packages first get de-installed, - then current versions of the corresponding packages get compiled and - installed. This is similar to manually noting which packages are - currently installed, then performing a series of "make deinstall" and - "make install" (or whatever UPDATE_TARGET is set to) for these packages. - - You can use the "update" target to resume package updating in case a - previous "make update" was interrupted for some reason. However, in - this case, make sure you don't call "make clean" or otherwise remove - the list of dependent packages in ${WRKDIR}. Otherwise you lose the - ability to automatically update the current package along with the - dependent packages you have installed. - - Resuming an interrupted "make update" will only work as long as the - package tree remains unchanged. If the source code for one of the - packages to be updated has been changed, resuming "make update" will - most certainly fail! - - The following variables can be used either on the command line or in - /etc/mk.conf to alter the behaviour of "make update": - - - UPDATE_TARGET: - Install target to recursively use for the updated package and the - dependent packages. Defaults to ${DEPENDS_TARGET} if set, "install" - otherwise for "make update". - E.g. "make update UPDATE_TARGET=package" - - - NOCLEAN: - Don't clean up after updating. Useful if you want to leave the - work sources of the updated packages around for inspection or - other purposes. Be sure you eventually clean up the source - tree (see the "clean-update" target below) or you may run into - troubles with old source code still lying around on your next - "make" or "make update". - - - REINSTALL: - Deinstall each package before installing (making ${DEPENDS_TARGET}). - This may be necessary if the "clean-update" target (see below) was - called after interrupting a running "make update". - - - DEPENDS_TARGET: - Allows you to disable recursion and hardcode the target for - packages. The default is "update" for the update target, - facilitating a recursive update of prerequisite packages. - Only set DEPENDS_TARGET if you want to disable recursive updates. - Use "UPDATE_TARGET" instead to just set a specific target for - each package to be installed during "make update" (see above). - - * clean-update: - Clean the source tree for all packages that would get updated if - "make update" was called from the current directory. This target - should not be used if the current package (or any of its depending - packages) have already been de-installed (e.g., after calling "make - update") or you may lose some packages you intended to update. - As a rule of thumb: only use this target _before_ the first time - you call "make update" and only if you have a dirty package tree - (e.g., if you used NOCLEAN). - - If you unsure about whether your tree is clean you can either perform - a "make clean" at the top of the tree, or use the following sequence - of commands from the directory of the package you want to update - (*before* running "make update" for the first time, otherwise you lose - all the packages you wanted to update!): - - make clean-update - make clean CLEANDEPENDS=YES - make update - - The following variables can be used either on the command line or in - /etc/mk.conf to alter the behaviour of "make clean-update": - - - CLEAR_DIRLIST: - After "make clean", do not reconstruct the list of directories to - update for this package. Only use this if "make update" successfully - installed all packages you wanted to update. Normally, this is done - automatically on "make update", but may have been suppressed by the - NOCLEAN variable (see above). - - * info: - This target invokes "pkg_info" for the current package. You can use this - e.g. to check which version of a package is installed. - - * readme: - This target generates a README.html file, which can be viewed using a - browser such as navigator (pkgsrc/www/navigator) or lynx - (pkgsrc/www/lynx). The generated files contain references to any - packages which are in the ${PACKAGES} directory on the local host. The - generated files can be made to refer to URLs based on FTP_PKG_URL_HOST - and FTP_PKG_URL_DIR. For example, if I wanted to generate README.html - files which pointed to binary packages on the local machine, in the - directory /usr/packages, set FTP_PKG_URL_HOST=file://localhost and - FTP_PKG_URL_DIR=/usr/packages. The ${PACKAGES} directory and its - subdirectories will be searched for all the binary packages. - - * readme-all: - Use this target to create a file README-all.html which contains a - list of all packages currently available in the NetBSD Packages - Collection, together with the category they belong to and a short - description. This file is compiled from the pkgsrc/*/README.html - files, so be sure to run this _after_ a "make readme". - - * cdrom-readme: - This is very much the same as the readme: target (see above), but is - to be used when generating a pkgsrc tree to be written to a CD-ROM. - This target also produces README.html files, and can be made to refer - to URLs based on CDROM_PKG_URL_HOST and CDROM_PKG_URL_DIR. - - * show-distfiles: - This target shows which distfiles and patchfiles are needed to build - the package. (DISTFILES and PATCHFILES, but not patches/*) - - * show-downlevel: - This target shows nothing if the package is not installed. If a version - of this package is installed, but is not the version provided in this - version of pkgsrc, then a warning message is displayed. This target can - be used to show which of your installed packages are downlevel, and so - the old versions can be deleted, and the current ones added. - - * show-pkgsrc-dir: - This target shows the directory in the pkgsrc hierarchy from which the - package can be built and installed. This may not be the same directory - as the one from which the package was installed. This target is intended - to be used by people who may wish to upgrade many packages on a single - host, and can be invoked from the top-level pkgsrc Makefile by using the - target "show-host-specific-pkgs" - - * show-installed-depends: - This target shows which installed packages match the current package's - DEPENDS. Useful if out of date DEPENDS are causing build problems. - - * check-shlibs: - After a package is installed, check all its binaries and (on ELF - platforms) shared libraries to see if they find the shared libs they need. - Run by default if PKG_DEVELOPER is set in /etc/mk.conf. - - * print-PLIST: - After a 'make install' from a new or upgraded pkg, this prints out an - attempt to generate a new PLIST from a 'find -newer work/.extract_done'. - An attempt is made to care for shared libs etc., but it is STRONGLY - recommended to review the result before putting it into PLIST. On - upgrades, it's useful to diff the output of this command against an already - existing PLIST file. - - If the package installs files via tar(1) or other methods that don't update - file access times, be sure to add these files manually to your PLIST, - as 'find -newer' won't catch them! - - * bulk-package: - Used to do bulk builds. If an appropriate binary package already exists, - no action is taken. If not, this target will compile, install and - package it (and it's depends, if PKG_DEPENDS is set properly, see - section 3.2.1). After creating the binary package, the sources, the - just-installed package and it's required packages are removed, - preserving free disk space. - - * bulk-install: - Used during bulk-installs to install required packages. If an - appropriate binary package is available, it will be installed via - pkg_add. If not, "make bulk-package" will be executed, but the installed - binary not be removed. A binary package is "appropriate" to be installed - via pkg_add if: - - - None of the package's files (Makefile, ...) were modified since it - was built - - None of the package's required (binary) packages were modified since - it was built - - - 8 buildlink2 methodology - ======================== - -"buildlink2" is a pkgsrc framework that controls what headers and libraries -are seen by a package's configure and build processes. This is implemented -in a two step process: - - (1) Symlink headers and libraries for dependencies into ${BUILDLINK_DIR}, - which by default is a subdirectory of ${WRKDIR}; - - (2) Create wrapper scripts that are used in place of the normal compiler - tools that translate -I${LOCALBASE}/include and -L${LOCALBASE}/lib - into references into ${BUILDLINK_DIR}. - -This normalizes the environment in which a package is built so that the -package may be built consistently despite what may other software may -installed. Please refer to pkgsrc/mk/buildlink2/buildlink2.txt for some -FAQs and answers regarding buildlink2, and to pkgsrc/mk/buildlink2/README -for a description of how buildlink2 is implemented in pkgsrc. - - - 8.1 Converting packages to use buildlink2 - ========================================= - -The process of converting packages to use the buildlink2 framework is -fairly straightforward. The package Makefile must define USE_BUILDLINK2. -If a dependency on a particular package, e.g. foo, is required for its -libraries and headers, then we replace: - - DEPENDS+= foo>=1.1.0:../../category/foo -with - .include "../../category/foo/buildlink2.mk" - -There are several buildlink2.mk files in pkgsrc/mk that handle special -package issues: - - * motif.buildlink2.mk checks for a system-provided Motif installation - or adds a dependency on x11/lesstif or x11/openmotif; - - * ossaudio.buildlink2.mk defines several variables that may be used by - packages that use the Open Sound System (OSS) API; - - * pthread.buildlink2.mk uses the value of PTHREAD_OPTS and checks for - native pthreads or adds a dependency on devel/pth as needed; - - * xaw.buildlink2.mk uses the value of XAW_TYPE to choose a particular - Athena widgets library. - -The comments in those buildlink2.mk files provide a more complete -description of how to use them properly. - - - 8.2 Writing buildlink2.mk files - =============================== - -A simple example of a buildlink2.mk file for a mythical package foo -follows: - - BUILDLINK_PACKAGES+= foo - BUILDLINK_PKGBASE.foo= foo - BUILDLINK_DEPENDS.foo?= foo>=1.0 - BUILDLINK_PKGSRCDIR.foo?= ../../category/foo - - EVAL_PREFIX+= BUILDLINK_PREFIX.foo=foo - BUILDLINK_PREFIX.foo_DEFAULT= ${LOCALBASE} - BUILDLINK_FILES.foo= include/foo.h - BUILDLINK_FILES.foo+= include/bar.h - BUILDLINK_FILES.foo+= lib/libfoo.* - - BUILDLINK_TARGETS+= foo-buildlink - - foo-buildlink: _BUILDLINK_USE - -The first section controls how the dependency on foo is added. The -dependency is constructed from four parts: - - (1) BUILDLINK_PACKAGES is the global list of packages for which - dependencies will be added by buildlink2; - - (2) BUILDLINK_DEPENDS.foo is the actual dependency recorded in the - installed package; - - (3) BUILDLINK_PKGSRCDIR.foo is the location of the foo pkgsrc - directory; - - (4) BUILDLINK_DEPMETHOD.foo (not shown above) controls whether we use - BUILD_DEPENDS or DEPENDS to add the foo dependency, where the - full dependency is added if BUILDLINK_DEPMETHOD.foo contains "full". - -The second section controls which files are linked into ${BUILDLINK_DIR}: - - (1) BUILDLINK_PREFIX.foo is the installation prefix of the package which - we derive by using EVAL_PREFIX; - - (2) BUILDLINK_FILES.foo is a list of files (shell globs allowed) relative - to the BUILDLINK_PREFIX.foo directory and will be symlinked into - ${BUILDLINK_DIR}; - - (3) BUILDLINK_FILES_CMD.foo (not shown above) is a shell pipeline that - outputs a list of files relative to the BUILDLINK_PREFIX.foo - directory and will be symlinked into ${BUILDLINK_DIR}. - -The remaining parts create the foo-buildlink target that actually performs -the symlinking and adds the foo-buildlink target to BUILDLINK_TARGETS, -which is the global list of targets to execute at do-buildlink time. - - - 9 Debugging - =========== - -To check out all the gotchas when building a package, here are the steps -that I do in order to get a package working. Please note this is basically -the same as what was explained in the previous sections, only with some -debugging aids. - - * Make sure PKG_DEVELOPER=1 is in /etc/mk.conf - * Create a new directory, and run - - # url2pkg http://www.example.com/path/to/distfile.tar.gz - - You'll need to have pkgsrc/pkgtools/url2pkg installed for that. - * Edit the Makefile as requested. - * Fill in DESCR - * ``make configure'' - * Add any dependencies glimpsed from the configure step to the package's - Makefile. - * Make the package compile, doing multiple rounds of - - # make - # pkgvi ${WRKSRC}/some/file/that/does/not/compile - # mkpatches - # patchdiff - # mv ${WRKDIR}/.newpatches/* patches - # make mps - # make clean - [ mkpatches, patchdiff and pkgvi are from pkgsrc/pkgtools/pkgdiff ] - - Doing as non-root user will assure that no files are modified that - shouldn't, esp. not during the build phase. - * Look at Makefile, fix if necessary; see section 4.1. - * Generate a PLIST: - - # make install - # make print-PLIST > PLIST - # make deinstall - # make install - # make deinstall - - You usually need to be root to do this. - * Look if there are any files left: - - # make print-PLIST - - If this brings up any files that are missing in PLIST, add them. - * Now that the PLIST is ok, install the package again and make a binary - package: - - # make reinstall && make package - - * Delete the installed package: - - # pkg_delete blub - - * Repeat the above find command, which shouldn't find anything now: - - # make print-PLIST - - * Reinstall the binary package: - - # pkg_add ..../blub.tgz - - * Play with it. Make sure everything works. - * Run pkglint from pkgsrc/pkgtools/pkglint, and fix the problems it reports. - - # pkglint - - * Submit (or commit, if you have cvs access); see section 11. - - - 10 FAQs & features of the package system - ======================================== - - 10.1 Packages using GNU autoconf - ================================ - -If your package uses GNU autoconf created configure scripts, add the following -to your package's Makefile: - - GNU_CONFIGURE= yes - -Note that this appends --prefix=${PREFIX} to CONFIGURE_ARGS, so you don't -have to do that yourself, and this may not be what you want. - - - 10.2 Other distrib methods than .tar.gz - ======================================= - -If your package uses a different distribution method from .tar.gz, take a -look at the package for pkgsrc/editors/sam, which uses a gzipped shell archive -(shar), but the quick solution is to set EXTRACT_SUFX to the name after the -DISTNAME field, and add the following to your package's Makefile: - - EXTRACT_SUFX= .msg.gz - EXTRACT_CMD= zcat - - - 10.3 Packages not creating their own subdirectory - ================================================= - -Your package doesn't create a subdirectory for itself (like GNU software -does, for instance), but extracts itself in the current directory: see -pkgsrc/editors/sam again, but the quick answer is: - - WRKSRC= ${WRKDIR} - -Please note that the old - - NO_WRKSUBDIR= yes - -has been deprecated and should not be used. - - - 10.4 Custom configuration process - ================================= - -Your package uses a weird Configure script: See the top package, but the -quick answer is: - - HAS_CONFIGURE= yes - CONFIGURE_SCRIPT= Configure - CONFIGURE_ARGS+= netbsd13 - - - 10.5 Packages not building in their DISTNAME directory - ====================================================== - -Your package builds in a different directory from its base DISTNAME - see -tcl and tk packages: - - WRKSRC= ${WRKDIR}/${DISTNAME}/unix - - - 10.6 How to fetch all distfiles at once - ======================================= - -You would like to download all the distfiles in a single batch from work or -university, where you can't run a "make fetch". But there's no archive of -the distfiles on ftp.netbsd.org and the one on ftp.freebsd.org contains -many distfiles for which there are no ports (yet). - -The answer here is to do a "make fetch-list" in /usr/pkgsrc, carry the -resulting list to your machine at work/school and use it there. If you don't -have a NetBSD-compatible ftp(1) (like lukemftp) at work, don't forget to -set FETCH_CMD to something that fetches an URL: - -At home: - - % cd /usr/pkgsrc - % make fetch-list FETCH_CMD=wget DISTDIR=/tmp/distfiles >/tmp/fetch.sh - % scp /tmp/fetch.sh work:/tmp - -At work: - - % sh /tmp/fetch.sh - % tar up /tmp/distfiles and take it home - -If you have a machine running NetBSD, and you want to get *all* distfiles -(even ones that aren't for your machine architecture), you can do so by -using the above-mentioned 'make fetch-list'-approach, or fetch the distfiles -directly by typing: - - % make mirror-distfiles - -If you even decide to ignore NO_{SRC,BIN}_ON_{FTP,CDROM}, then you can -get all & everything by typing - - % make fetch NO_SKIP=yes - - - 10.7 How to fetch files from behind a firewall - ============================================== - -If you are sitting behind a firewall which does not allow direct connections -to Internet hosts (i.e. non-NAT), you may specify the relevant proxy hosts. -This is done using an environment variable in the form of a URL -e.g. in Amdahl, the machine orpheus.amdahl.com is one of the firewalls, and -it uses port 80 as the proxy port number. So the proxy environment -variables look like: - - ftp_proxy=ftp://orpheus.amdahl.com:80/ - http_proxy=http://orpheus.amdahl.com:80/ - - - 10.8 If your patch contains an RCS ID - ===================================== - -See section 4.3 on how to remove RCS IDs from patch files. - - - 10.9 How to pull in variables from /etc/mk.conf - =============================================== - -The problem with package-defined variables that can be overridden via -MAKECONF or /etc/mk.conf is that make(1) expands a variable as it is -used, but evaluates preprocessor like statements (.if, .ifdef and -.ifndef) as they are read. So, to use any variable (which may be set -in /etc/mk.conf) in one of the .if* statements, the file /etc/mk.conf -must be included before that .if* statement. - -Rather than have a number of ad-hoc ways of including /etc/mk.conf, -should it exist, or MAKECONF, should it exist, include the -pkgsrc/mk/bsd.prefs.mk file in the package Makefile before any -preprocessor-like .if, .ifdef, or .ifndef statements: - - .include "../../mk/bsd.prefs.mk" - - .if defined(USE_MENUS) - ... - .endif - -If you wish to set the CFLAGS variable in /etc/mk.conf please make sure -to use: - - CFLAGS+= -your -flags - -Using 'CFLAGS=' (ie without the '+') may lead to problems with packages -that need to add their own flags. Also, you may want to take a look at -the devel/cpuflags package, if you're interested in optimization for the -current CPU. - - - 10.10 Is there a mailing list for pkg-related discussion? - ========================================================= - -Yes. We are using tech-pkg@netbsd.org for discussing package related -issues. To subscribe do: - - % echo subscribe tech-pkg | mail majordomo@netbsd.org - - - 10.11 How do i tell "make fetch" to do passive FTP? - =================================================== - -This depends on which utility is used to retrieve distfiles. From -bsd.pkg.mk, FETCH_CMD is assigned the first available command from the -following list: - - /usr/bin/fetch - ${LOCALBASE}/bsd/bin/ftp - /usr/bin/ftp - -On a default NetBSD install, this will be /usr/bin/ftp, which automatically -tries passive connections first, and falls back to active connections if the -server refuses to do passive. For the other tools, add the following to your -/etc/mk.conf file: PASSIVE_FETCH=1 - -Having that option present will prevent /usr/bin/ftp from falling back to -active transfers. - - - 10.12 Dependencies on other packages - ==================================== - -Your package may depend on some other package being present - and there are -various ways of expressing this dependency. NetBSD supports the -BUILD_DEPENDS and DEPENDS definitions, as well as dependencies via -buildlink2.mk (see section 8). - -The basic difference between the two definitions is as follows: The -DEPENDS definition registers that pre-requisite in the binary package, -whilst the BUILD_DEPENDS definition does not. - -This means that if you only need a package present whilst you are building, -it should be noted as a BUILD_DEPENDS. - -The format for a BUILD_DEPENDS and a DEPENDS definition is: - - <pre-req-package-name>:../../<category>/<pre-req-package> - -Please note that the "pre-req-package-name" may include any of the wildcard -version numbers recognised by pkg_info(1). - -(a) If your package needs to use another package to build itself, this -is specified using the BUILD_DEPENDS definition. - - BUILD_DEPENDS+= autoconf-2.13:../../devel/autoconf - -(b) If your package needs a library with which to link, this is specified -using the DEPENDS definition. An example of this is the pkgsrc/print/lyx -package, which uses the xpm library, version 3.4j to build. - - DEPENDS+= xpm-3.4j:../../graphics/xpm - -You can also use wildcards in package dependences: - - DEPENDS+= xpm-[0-9]*:../../graphics/xpm - -Note that such wildcard dependencies are retained when creating binary -packages. The dependency is checked when installing the binary -package and any package which matches the pattern will be used. -Wildcard dependencies should be used with care. - -The -[0-9]* should be used instead of -* to avoid potentially -ambiguous matches such as tk-postgresql matching a tk-* DEPEND. - -(c) If your package needs some executable to be able to run correctly, this -is specified using the DEPENDS definition. The pkgsrc/print/lyx package needs -to be able to execute the latex binary from the teTeX package when it runs, -and that is specified: - - DEPENDS+= teTeX-[0-9]*:../../print/teTeX - -The comment about wildcard dependencies from previous paragraph -applies here, too. - -If your package needs files from another package to build, see the -first part of the "do-configure" target pkgsrc/print/ghostscript5 package -(it relies on the jpeg sources being present in source form during the -build): - - if [ ! -e ${_PKGSRCDIR}/graphics/jpeg/${WRKDIR:T}/jpeg-6b ]; then \ - cd ${_PKGSRCDIR}/../../graphics/jpeg && ${MAKE} extract; \ - fi - -If you build any other packages that way, please make sure the working -files are deleted too when this package's working files are cleaned up. -The easiest way to do so is by adding a pre-clean target: - - pre-clean: - cd ${_PKGSRCDIR}/../../graphics/jpeg && ${MAKE} clean - -Please also note the BUILD_USES_MSGFMT and BUILD_USES_GETTEXT_M4 definitions, -which are provided as convenience definitions. The former works out whether -msgfmt(1) is part of the base system, and, if it isn't, installs the -pkgsrc/devel/gettext package. The latter adds a build dependency on either an -installed version of an older gettext package, or if it isn't, installs the -pkgsrc/devel/gettext-m4 package. - - - 10.13 Conflicts with other packages - =================================== - -Your package may conflict with other packages a user might already have -installed on his system, e.g. if your package installs the same set of -files like another package in our pkgsrc tree. - -In this case you can set CONFLICTS to a space separated list of packages -(including version string) your package conflicts with. - -For example pkgsrc/x11/Xaw3d and pkgsrc/x11/Xaw-Xpm install provide the -same shared library, thus you set in pkgsrc/x11/Xaw3d/Makefile: - - CONFLICTS= Xaw-Xpm-[0-9]* - -and in pkgsrc/x11/Xaw-Xpm/Makefile: - - CONFLICTS= Xaw3d-[0-9]* - -Packages will automatically conflict with other packages with the name prefix -and a different version string. "Xaw3d-1.5" e.g. will automatically conflict -with the older version "Xaw3d-1.3". - - - 10.14 Software which has a WWW Home Page - ======================================== - -The NetBSD packages system now supports a variable called HOMEPAGE. -If the software being packaged has a home page, the Makefile should -include the URL for that page in the HOMEPAGE variable. The definition -of the variable should be placed immediately after the MAINTAINER -variable. - - - 10.15 How to handle modified distfiles with the 'old' name - ========================================================== - -Sometimes authors of a software package make some modifications after the -software was released, and they put up a new distfile without changing the -package's version number. If a package is already in pkgsrc at that time, -the md5 checksum will no longer match. The correct way to work around this -is to update the package's md5 checksum to match the package on the master -site (beware, any mirrors may not be up to date yet!), and to remove the -old distfile from ftp.netbsd.org's /pub/NetBSD/packages/distfiles directory. -Furthermore, a mail to the package's author seems appropriate making sure -the distfile was really updated on purpose, and that no trojan horse or so -crept in. - - - 10.16 What does "Don't know how to make /usr/share/tmac/tmac.andoc" mean? - ========================================================================= - -When compiling the pkgsrc/pkgtools/pkg_install package, you get the error -from make that it doesn't know how to make /usr/share/tmac/tmac.andoc? This -indicates that you don't have installed the "text" set on your machine -(nroff, ...). It is recommended to do that. - -In the case of the pkg_install package, you can get away with setting -NOMAN=YES either in the environment or in /etc/mk.conf. - - - 10.17 How to handle incrementing versions when fixing an existing package - ========================================================================= - -When making fixes to an existing package it can be useful to change -the version number in PKGNAME. To avoid conflicting with future versions -by the original author, a 'nb1' ('nb2', ...) suffix can be used on package -versions by setting PKGREVISION=1 (2,. ..). The "nb" is treated like a "." -by the pkg tools. E.g. - -DISTNAME= foo-17.42 -PKGREVISION= 9 - -will result in a PKGNAME of foo-17.42nb9. - -When a new release of the package is released, the PKGREVISION should be -removed. E.g. on a new minor release of the above package, things should -be like: - -DISTNAME= foo-17.43 - - - 10.18 "Could not find bsd.own.mk" - what's wrong? - ================================================= - -You didn't install the compiler set, comp.tgz, when you installed your -NetBSD machine. Please get it and install it, by extracting it in /: - - # tar --unlink -pvxf .../comp.tgz - -comp.tgz is part of every NetBSD release, please get the one matching -the release you have installed (determine via "uname -r"). - - - 10.19 Restricted packages - ========================= - -Some licenses restrict how software may be re-distributed. In order to -satisfy these restrictions, the package system defines five make variables -that can be set to note these restrictions: - - * RESTRICTED: - This variable should be set whenever a restriction exists - (regardless of its kind). Set this variable to a string - containing the reason for the restriction. - - * NO_BIN_ON_CDROM: - Binaries may not be placed on CD-ROM. Set this variable to - ${RESTRICTED} whenever a binary package may not be included - on a CD-ROM. - - * NO_BIN_ON_FTP: - Binaries may not be placed on an ftp server. Set this - variable to ${RESTRICTED} whenever a binary package may not - not be made available on the Internet. - - * NO_SRC_ON_CDROM: - Distfiles may not be placed on CD-ROM. Set this variable to - ${RESTRICTED} if re-distribution of the source code or other - distfile(s) is not allowed on CD-ROMs. - - * NO_SRC_ON_FTP: - Distfiles may not be placed on FTP. Set this variable to - ${RESTRICTED} if re-distribution of the source code or other - distfile(s) via the Internet is not allowed. - -Please note that the use of NO_PACKAGE, IGNORE, NO_CDROM, or other generic -make variables to denote restrictions is deprecated, because they -unconditionally prevent users from generating binary packages! - - - 10.20 Packages using (n)curses - ============================== - -Some packages need curses functionality that wasn't present in NetBSD's own -curses prior to 1.4Y. - -If ../../devel/ncurses/buildlink2.mk is included in a package's Makefile, -then a curses library and headers with ncurses functionality are linked -into ${BUILDLINK_DIR} at pre-configure time. If ncurses is actually -required, then define USE_NCURSES in the package's Makefile: - USE_NCURSES= # redrawwin -The comment should indicate which functions are missing. - - - 10.21 Automated security check - ============================== - -Please be aware that there can often be bugs in third-party software, -and some of these bugs can leave a machine vulnerable to exploitation -by attackers. In an effort to lessen the exposure, the NetBSD -packages team maintains a database of known-exploits to packages which -have at one time been included in pkgsrc. The database can be -downloaded automatically, and a security audit of all packages -installed on a system can take place. To do this, install the -pkgsrc/security/audit-packages package. It has two components: - - (1) download-vulnerability-list, an easy way to download a list of the - security vulnerabilities information. This list is kept up to date by - the NetBSD security officer and the NetBSD packages team, and is - distributed from the NetBSD ftp server: - - ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/vulnerabilities - - (2) audit-packages, an easy way to audit the current machine, checking - each vulnerability which is known. If a vulnerable package is - installed, it will be shown by output to stdout, including a - description of the type of vulnerability, and a URL containing more - information. - -Use of the audit-packages package is strongly recommended. - -The following message is displayed as part of the audit-packages -installation procedure: - - ====================================================================== - You may wish to have the vulnerabilities file downloaded daily so that - it remains current. This may be done by adding an appropriate entry - to the root users crontab(5) entry. For example the entry - - # download vulnerabilities file - 0 3 * * * ${PREFIX}/sbin/download-vulnerability-list >/dev/null 2>&1 - - will update the vulnerability list every day at 3AM. - - In addition, you may wish to run the package audit from the daily - security script. This may be accomplished by adding the following - lines to /etc/security.local - - if [ -x ${PREFIX}/sbin/audit-packages ]; then - ${PREFIX}/sbin/audit-packages - fi - ====================================================================== - - -Note to package developers: When a vulnerability is found, this should be -noted in localsrc/security/advisories/pkg-vulnerabilities, and after the -commit of that file, it should be copied to -/pub/NetBSD/packages/distfiles/vulnerabilities on ftp.netbsd.org. - - - 10.22 What's the proper way to create an account from a package? - ================================================================ - -There are two make variables used to control the creation of package-specific -groups and users at pre-install time. The first is PKG_GROUPS, which is a -list of group[:groupid] elements, where the groupid is optional. The second -is PKG_USERS, which is a list of elements of the form: - - user:group[:[userid][:[description][:[home][:shell]]]] - -where only the user and group are required, the rest being optional. A -simple example is: - - PKG_GROUPS= foogroup - PKG_USERS= foouser:foogroup - -A more complex example is that creates two groups and two users is: - - PKG_GROUPS= group1 group2:1005 - PKG_USERS= first:group1::First\\ User \ - second:group2::Second\\ User:/home/second:${SH} - -By default, a new user will have home directory /nonexistent, and login shell -/sbin/nologin unless they are specified as part of the user element. - -The package Makefile must also set USE_PKGINSTALL to "YES" prior to the -inclusion of bsd.pkg.mk. This will cause the users and groups to be created -at pre-install time, and the admin will be prompted to remove them at -post-deinstall time. Automatic creation of the users and groups can be -toggled on and off by setting the environment variable PKG_CREATE_USERGROUP -prior to package installation. - - - 10.23 How to handle compiler bugs - ================================= - -Some source files trigger bugs in the compiler, based on combinations -of compiler version and architecture and almost always relation to -optimisation being enabled. Common symptoms are gcc internal errors -or never finishing compiling a file. - -Typically a workaround involves testing the MACHINE_ARCH and compiler -version, disabling optimisation for that file/MACHINE_ARCH/compiler -combination, and documenting it in doc/HACKS. See doc/HACKS for -examples. - - - 10.24 Packages providing info files - =================================== - -Some packages install info files or use the makeinfo or install-info -commands. Each info files: - - is considered to be installed in the directory - ${PREFIX}/${INFO_DIR}; - - is registered in the Info directory file - ${PREFIX}/${INFO_DIR}/dir; - - and must be listed as a filename in the INFO_FILES variable - in the package Makefile. - -INFO_DIR defaults to `info' and can be overridden in the package Makefile. -INSTALL and DEINSTALL scripts will be generated for handling registration -of the info files in the Info directory file. -The command install-info used for the info files registration is either -provided by the system or by a special purpose package automatically -added as dependency if needed. - -A package which need the makeinfo command at build time must define -the variable USE_MAKEINFO in its Makefile. If a minimum version of the -makeinfo command is needed it should be noted with the TEXINFO_REQD variable -in the package Makefile. By default a minimum version of 3.12 is required. -If the system does not provide a makeinfo command or if it does not match -the required minimum a build dependency on the devel/gtexinfo package is -added. - -The installation process of the software provided by the package must not -use the install-info as the registration of info files -is the task of the package INSTALL SCRIPT, and it must use -the right makeinfo command. - -If the package use buildlink2 framework no special action should be needed -to achieve this goal. - -If the package does not use the buildlink2 framework patch files are likely -to be needed so the build and installation process of the software -picks up the -possibly dummys- values of INSTALL_INFO and MAKEINFO in the -environment. - -*NOTE* Temporally the variable USE_NEW_TEXINFO must be defined in the -package Makefile. Previously info files, install-info and makeinfo -were handled somewhat differently and the two ways will coexist for -a short period of time until all older packages are updated. - - 10.25 Packages whose distfiles aren't available for plain downloading - ===================================================================== - -If you need to download from a dynamic URL you can set DYNAMIC_MASTER_SITES -and a 'make fetch' will call files/getsite.sh with the name of each file -to download as an argument, expecting it to output the URL of the directory -from which to download it. graphics/ns-cult3d is an example of this usage. - -If the download can't be automated, because the user must submit personal -information to apply for a password, or must pay for the source, or whatever, -you can set _FETCH_MESSAGE to a macro which displays a message explaining -the situation. _FETCH_MESSAGE must be executable shell commands, not just a -message. (Generally, it executes ${ECHO}). As of this writing, the following -packages use this: audio/realplayer, cad/simian, devel/ipv6socket, -emulators/vmare-module, fonts/acroread-jpnfont, sysutils/storage-manager, -www/ap-aolserver, www/openacs. Try to be consistent with them. - - - 10.26 Using pkgsrc on non-NetBSD (Darwin, FreeBSD, IRIX, Linux, OpenBSD, Solaris) - ================================================================================= - -In order to use pkgsrc on a non-NetBSD operating system, you must first -bootstrap the necessary utilities (BSD make, pkg_*, ...). See -http://www.netbsd.org/Documentation/software/packages.html#bootstrap -for information on boostrapping. Binary bootstrap-kits are available from that -URL as well. If your Operating System is not yet supported, we encourage you to -port the bootstrap-kit and submit your changes. - - - 10.27 Configuration files handling and placement - ================================================ - -The global variable PKG_SYSCONFBASE (and some others) can be set by the -system administrator in /etc/mk.conf to define the place where -configuration files get installed. Therefore, packages must be adapted to -support this feature. Keep in mind that you should only install files that -are strictly necessary in the configuration directory, files that can -go to $PREFIX/share should go there. - -We will take a look at available variables first (bsd.pkg.mk contains more -information). PKG_SYSCONFDIR is where the configuration files for a package -may be found (that is, the full path, e.g. /etc or /usr/pkg/etc). This -value may be customized in various ways: - - 1) PKG_SYSCONFBASE is the main config directory under which all package - configuration files are to be found. Users will typically want to set - it to /etc, or accept the default location of $PREFIX/etc. - - 2) PKG_SYSCONFSUBDIR is the subdirectory of PKG_SYSCONFBASE under which - the configuration files for a particular package may be found. Defaults - to $SYSCONFBASE - - 3) PKG_SYSCONFVAR is the special suffix used to distinguish any overriding - values for a particular package (see next item). It defaults to - ${PKGBASE}, but for a collection of related packages that should all - have the same PKG_SYSCONFDIR value, it can be set in each of the - package Makefiles to a common value. - - 4) PKG_SYSCONFDIR.${PKG_SYSCONFVAR} overrides the value of - ${PKG_SYSCONFDIR} for packages with the same value for PKG_SYSCONFVAR. - - As an example, all the various KDE packages may want to set - PKG_SYSCONFVAR to "kde" so admins can set ${PKG_SYSCONFDIR.kde} in - /etc/mk.conf to define where to install KDE config files. - -Programs' configuration directory should be defined during the configure -stage. Packages that use GNU autoconf can usually do this by using the ---sysconfdir parameter, but this brings some problems as we will see now. -When you change this pathname in packages, you should not allow them to -install files in that directory directly. Instead they need to install -those files under share/examples/${PKGNAME} so PLIST can register them. - -Once you have the required configuration files in place (under the -share/examples directory) the variable CONF_FILES should be set to copy -them into PKG_SYSCONFDIR. The contents of this variable is formed by pairs -of filenames; the first element of the pair specifies the file inside the -examples directory (registered by PLIST) and the second element specifies -the target file. This is done this way to allow binary packages to place -files in the right directory using INSTALL/DEINSTALL scripts which are -created automatically. The package Makefile must also set USE_PKGINSTALL -to "YES" prior to the inclusion of bsd.pkg.mk to use these automatically -generated scripts. The automatic copying of config files can be toggled by -setting the environment variable PKG_CONFIG prior to package installation. - -Here is an example, taken from mail/mutt/Makefile: - - EGDIR= ${PREFIX}/share/doc/mutt/samples - CONF_FILES= ${EGDIR}/Muttrc ${PKG_SYSCONFDIR}/Muttrc - -As you can see, this package installs configuration files inside EGDIR, -which are registered by PLIST. After that, the variable CONF_FILES lists -the installed file first and then the target file. Users will also get an -automatic message when files are installed using this method. - - - 10.28 Packages providing login shells - ===================================== - -If the purpose of the package is to provide a login shell, the variable -PKG_SHELL should contain the full pathname of the shell executable installed -by this package. The package Makefile also must set USE_PKGINSTALL to "YES" -prior to the inclusion of bsd.pkg.mk to use the automatically generated -INSTALL/DEINSTALL scripts. - -An example taken from shells/zsh: - - USE_PKGINSTALL= YES - PKG_SHELL= ${PREFIX}/bin/zsh - -The shell is registered into /etc/shells file automatically in the -post-install step by the auto-generated INSTALL script and removed in the -deinstall step by the DEINSTALL script. - - - 10.29 Packages providing locale catalogues - ========================================== - -If the package provides its own locale catalogues, the variable -USE_PKGLOCALEDIR should be defined. It will ensure that the package's -Makefile template files are fixed and point to the correct locale directories -(which may vary, depending on OS), if necessary. See also section 5.1 for -details about ${PKGLOCALEDIR}. This functionality is buildlink2-only. - - - 10.30 Using 'sudo' with pkgsrc - ============================== - -When installing packages as non-root user and using the just-in-time -su(1) feature of pkgsrc, it can become annoying to type in the root -password for each required package installed. To avoid this, the sudo -package can be used, which does password caching over a limited time. -To use it, install sudo (either as binary package or from -pkgsrc/security/sudo) and then put the following into your /etc/mk.conf: - - SU_CMD=/usr/pkg/bin/sudo /bin/sh -c - - - 10.31 Packages that cannot or should not be built - ================================================= - -There are several reasons why a package might be instructed to not -build under certain circumstances. If the package builds and runs -on most platforms, the exceptions should be noted with NOT_FOR_PLATFORM. -If the package builds and runs on a small handful of platforms, -set ONLY_FOR_PLATFORM instead. If the package should be skipped -(for example, because it provides functionality already provided -by the system), set PKG_SKIP_REASON to a descriptive message. If -the package should fail because some preconditions are not met, -set PKG_FAIL_REASON to a descriptive message. - -IGNORE is deprecated because it didn't provide enough information -to determine whether the build should fail. - - - 10.32 Packages which should not be deleted, once installed - ========================================================== - -To ensure that a package may not be deleted, once it has been installed, -the PKG_PRESERVE definition should be set in the package Makefile. This -will be carried into any binary package that is made from this pkgsrc -entry. A "preserved" package will not be deleted using pkg_delete(1), -unless the "-f" option is used. - - 10.33 Packages containing perl scripts - ====================================== - -If your package contains interpreted perl scripts, set REPLACE_PERL to -ensure that the proper interpreter path is set. REPLACE_PERL should -contain a list of scripts, relative to WRKSRC, that you want adjusted. - - 11 Submitting & Committing - ========================== - - 11.1 Submitting your packages - ============================= - -You have to separate between binary and "normal" (source) packages here: - - * precompiled binary packages: - Our policy is that we accept binaries only from NetBSD developers to - guarantee that the packages don't contain any trojan horses etc. - This is not to piss anyone off but rather to protect our users! - You're still free to put up your home-made binary packages and tell - the world where to get them. - - * packages: - First, check that your package is complete, compiles and runs well; see - section 9 and the rest of this document. Next, generate an uuencoded - gzipped tar(1) archive, preferably with all files in a single directory. - Finally, send-pr(1) with category "pkg", a synopsis which includes the - package name and version number, a short description of your package - (contents of the COMMENT variable or DESCR file are OK) and attach the - archive to your PR. - - If you want to submit several packages, please send a separate PR for - each one, it's easier for us to track things that way. - - - 11.2 Committing: Importing the package into CVS - =============================================== - -This section is only of interest for NetBSD developers with write -access to the NetBSD pkgsrc repository. Please remember that cvs -imports files relative to the cwd, and that the pathname that you -give the "cvs import" command is so that it knows where to place -the files in the repository. Newly created packages should be -imported with a vendor tag of "TNF" and a release tag of "pkgsrc-base", -e.g: - - % cd .../pkgsrc/<category>/<pkgname> - % cvs import pkgsrc/<category>/<pkgname> TNF pkgsrc-base - -and remember to move the directory from which you imported out of -the way, or cvs will complain the next time you "cvs update" your -source tree. Also don't forget to add the new package to the -category's Makefile. - -The commit message of the initial import should include part of the -DESCR file, so people reading the mailing lists know what the package -is/does. - -Please note all package updates/additions in pkgsrc/doc/CHANGES! It's very -important to keep this file up to date and conforming to the existing -format, because it will be used by scripts to automatically update pages on -www.netbsd.org and other sites. - -For new packages, "cvs import" is preferred to "cvs add" because -the former gets everything with a single command, and provides a -consistent tag. - - - 11.3 Updating a Package to a Newer Version - ========================================== - -Please always put a concise, appropriate and relevant summary of the -changes between old and new versions into the commit log when updating -a package. There are various reasons for this: - -+ a URL is volatile, and can change over time. It may go away completely, -or its information may be overwritten by newer information. - -+ having the change information between old and new versions in our CVS -repository is very useful for people who use either cvs or anoncvs. - -+ having the change information between old and new versions in our CVS -repository is very useful for people who read the pkgsrc-changes mailing -list, so that they can make tactical decisions about when to upgrade -the package. - -Please also recognise that, just because a new version of a package -has been released, it should not automatically be upgraded in the CVS -repository. We prefer to be conservative in the packages that are -included in pkgsrc - development or beta packages are not really the -best thing for most places in which pkgsrc is used. Please use your -judgement about what should go into pkgsrc, and bear in mind that -stability is to be preferred above new and possibly untested features. - - - 11.4 Moving a Package in pkgsrc - =============================== - - 1. Make a copy of the directory somewhere else. - 2. Remove all CVS dirs. - Alternatively to the first two steps you can also do: - cvs -d user@cvs.netbsd.org:/cvsroot export -D today pkgsrc/category/package - and use that for further work. - 3. Fix CATEGORIES and any DEPENDS paths that just did ../package - instead of ../../category/package. - 4. "cvs import" the modified package in the new place. - 5. Check if any package depends on it: - cd /usr/pkgsrc - grep /package */*/Makefile* */*/buildlink* - 6. Fix paths in packages from step 5 to point to new location. - 7. "cvs rm (-f)" the package at the old location. - 8. Remove from oldcategory/Makefile. - 9. Add to newcategory/Makefile. -10. Commit the changed and removed files: - cvs commit oldcategory/package oldcategory/Makefile newcategory/Makefile - and any packages from step 5, of course. - - - 12 A simple example of a package: bison - ======================================= - -I checked to find a piece of software that wasn't in the packages -collection, and picked GNU bison. Quite why someone would want to have -bison when Berkeley yacc is already present in the tree is beyond me, but -it's useful for the purposes of this exercise. - - - 12.1 files - ========== - -The file contents in this section must be used without the "> " prefix. - - - 12.1.1 Makefile - =============== - - # <$>NetBSD<$> - - DISTNAME= bison-1.25 - CATEGORIES= devel - MASTER_SITES= ${MASTER_SITE_GNU} - MAINTAINER= thorpej@netbsd.org - HOMEPAGE= http://www.gnu.org/software/bison/bison.html - COMMENT= GNU yacc clone - - GNU_CONFIGURE= yes - INFO_FILES= bison.info - - .include "../../mk/bsd.pkg.mk" - - - 12.1.2 DESCR - ================ - - GNU version of yacc. Can make re-entrant parsers, and numerous other - improvements. Why you would want this when Berkeley yacc(1) is part - of the NetBSD source tree is beyond me. - - - 12.1.3 PLIST - ================ - - @comment <$>NetBSD<$> - bin/bison - man/man1/bison.1.gz - info/bison.info - info/bison.info-1 - info/bison.info-2 - info/bison.info-3 - info/bison.info-4 - info/bison.info-5 - share/bison.simple - share/bison.hairy - - - 12.1.4 Checking a package "pkglint" - =================================== - -The NetBSD package system comes with a tool called "pkglint" (located in the -directory "pkgsrc/pkgtools/pkglint") which helps to check the contents of these -files. After installation it is quite easy to use, just change to the -directory of the package you wish to examine and execute "pkglint": - - % pkglint - OK: checking ./DESCR. - OK: checking Makefile. - OK: checking distinfo. - OK: checking patches/patch-aa. - looks fine. - -Depending on the supplied command line arguments (see "man pkglint") more -verbose checks will be performed. Use e.g. "pkglint -v" for a very verbose -check. - - - 12.2 Steps for building, installing, packaging - ============================================== - -Create the directory where the package lives, plus any auxiliary directories: - - # cd /usr/pkgsrc/lang - # mkdir bison - # cd bison - # mkdir patches pkg - -Create Makefile, DESCR and PLIST as in section 11.1, -then continue with fetching the distfile: - - # make fetch - >> bison-1.25.tar.gz doesn't seem to exist on this system. - >> Attempting to fetch from ftp://prep.ai.mit.edu/pub/gnu//. - Requesting ftp://prep.ai.mit.edu/pub/gnu//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/) - ftp: Error retrieving file: 500 Internal error - - >> Attempting to fetch from ftp://wuarchive.wustl.edu/systems/gnu//. - Requesting ftp://wuarchive.wustl.edu/systems/gnu//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/) - ftp: Error retrieving file: 500 Internal error - - >> Attempting to fetch from ftp://ftp.freebsd.org/pub/FreeBSD/distfiles//. - Requesting ftp://ftp.freebsd.org/pub/FreeBSD/distfiles//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/) - Successfully retrieved file. - -Generate the checksum of the distfile into distinfo: - - # make makesum - -Now compile: - - # make - >> Checksum OK for bison-1.25.tar.gz. - ===> Extracting for bison-1.25 - ===> Patching for bison-1.25 - ===> Ignoring empty patch directory - ===> Configuring for bison-1.25 - creating cache ./config.cache - checking for gcc... cc - checking whether we are using GNU C... yes - checking for a BSD compatible install... /usr/bin/install -c -o bin -g bin - checking how to run the C preprocessor... cc -E - checking for minix/config.h... no - checking for POSIXized ISC... no - checking whether cross-compiling... no - checking for ANSI C header files... yes - checking for string.h... yes - checking for stdlib.h... yes - checking for memory.h... yes - checking for working const... yes - checking for working alloca.h... no - checking for alloca... yes - checking for strerror... yes - updating cache ./config.cache - creating ./config.status - creating Makefile - ===> Building for bison-1.25 - cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g LR0.c - cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g allocate.c - cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g closure.c - cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g conflicts.c - cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g derives.c - cc -c -DXPFILE=\"/usr/pkg/share/bison.simple\" -DXPFILE1=\"/usr/pkg/share/bison.hairy\" -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -g ./files.c - cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g getargs.c - cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g gram.c - cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g lalr.c - cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g lex.c - cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g main.c - cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g nullable.c - cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g output.c - cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g print.c - cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g reader.c - cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g reduce.c - cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g symtab.c - cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g warshall.c - cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g version.c - cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g getopt.c - cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g getopt1.c - cc -g -o bison LR0.o allocate.o closure.o conflicts.o derives.o files.o getargs.o gram.o lalr.o lex.o main.o nullable.o output.o print.o reader.o reduce.o symtab.o warshall.o version.o getopt.o getopt1.o - ./files.c:240: warning: mktemp() possibly used unsafely, consider using mkstemp() - rm -f bison.s1 - sed -e "/^#line/ s|bison|/usr/pkg/share/bison|" < ./bison.simple > bison.s1 - -Everything seems OK, so install the files: - - # make install - >> Checksum OK for bison-1.25.tar.gz. - ===> Installing for bison-1.25 - sh ./mkinstalldirs /usr/pkg/bin /usr/pkg/share /usr/pkg/info /usr/pkg/man/man1 - rm -f /usr/pkg/bin/bison - cd /usr/pkg/share; rm -f bison.simple bison.hairy - rm -f /usr/pkg/man/man1/bison.1 /usr/pkg/info/bison.info* - install -c -o bin -g bin -m 555 bison /usr/pkg/bin/bison - /usr/bin/install -c -o bin -g bin -m 644 bison.s1 /usr/pkg/share/bison.simple - /usr/bin/install -c -o bin -g bin -m 644 ./bison.hairy /usr/pkg/share/bison.hairy - cd .; for f in bison.info*; do /usr/bin/install -c -o bin -g bin -m 644 $f /usr/pkg/info/$f; done - /usr/bin/install -c -o bin -g bin -m 644 ./bison.1 /usr/pkg/man/man1/bison.1 - ===> Registering installation for bison-1.25 - -You can now use bison, and also - if you decide so - remove it with -"pkg_delete bison-1.25". Should you decide that you want a binary package, -do this now: - - # make package - >> Checksum OK for bison-1.25.tar.gz. - ===> Building package for bison-1.25 - Creating package bison-1.25.tgz - Registering depends:. - Creating gzip'd tar ball in '/u/pkgsrc/lang/bison/bison-1.25.tgz' - -Now that you don't need the source and object files any more, clean up: - - # make clean - ===> Cleaning for bison-1.25 - - -====================== -Appendix A: build logs -====================== - - A.1 Building top - ================ - - # make - >> top-3.5beta5.tar.gz doesn't seem to exist on this system. - >> Attempting to fetch from ftp://ftp.groupsys.com/pub/top/. - Requesting ftp://ftp.groupsys.com/pub/top/top-3.5beta5.tar.gz (via ftp://orpheus.amdahl.com:80/) - Successfully retrieved file. - >> Checksum OK for top-3.5beta5.tar.gz. - ===> Extracting for top-3.5beta5 - ===> Patching for top-3.5beta5 - ===> Applying NetBSD patches for top-3.5beta5 - ===> Configuring for top-3.5beta5 - /bin/cp /u/pkgsrc/sysutils/top/files/defaults /u/pkgsrc/sysutils/top/work/top-3.5beta5/.defaults - chmod a-x /u/pkgsrc/sysutils/top/work/top-3.5beta5/install - - Reading configuration from last time... - - Using these settings: - Bourne Shell /bin/sh - C compiler cc - Compiler options -DHAVE_GETOPT -O - Awk command awk - Install command /usr/bin/install - - Module netbsd13 - LoadMax 5.0 - Default TOPN -1 - Nominal TOPN 18 - Default Delay 2 - Random passwd access yes - Table Size 47 - Owner root - Group Owner kmem - Mode 2755 - bin directory $(PREFIX)/bin - man directory $(PREFIX)/man/man1 - man extension 1 - man style man - - Building Makefile... - Building top.local.h... - Building top.1... - Doing a "make clean". - rm -f *.o top core core.* sigdesc.h - To create the executable, type "make". - To install the executable, type "make install". - ===> Building for top-3.5beta5 - cc -DHAVE_GETOPT -DORDER -DHAVE_GETOPT -O -c top.c - awk -f sigconv.awk /usr/include/sys/signal.h >sigdesc.h - cc -DHAVE_GETOPT -DORDER -DHAVE_GETOPT -O -c commands.c - cc -DHAVE_GETOPT -DORDER -DHAVE_GETOPT -O -c display.c - cc -DHAVE_GETOPT -DORDER -DHAVE_GETOPT -O -c screen.c - cc -DHAVE_GETOPT -DORDER -DHAVE_GETOPT -O -c username.c - cc -DHAVE_GETOPT -DORDER -DHAVE_GETOPT -O -c utils.c - utils.c: In function `errmsg': - utils.c:348: warning: return discards `const' from pointer target type - cc -DHAVE_GETOPT -DORDER -DHAVE_GETOPT -O -c version.c - cc -DHAVE_GETOPT -DORDER -DHAVE_GETOPT -O -c getopt.c - cc "-DOSREV=12G" -DHAVE_GETOPT -DORDER -DHAVE_GETOPT -O -c machine.c - rm -f top - cc -o top top.o commands.o display.o screen.o username.o utils.o version.o getopt.o machine.o -ltermcap -lm -lkvm - # - # - # - # - # make install - >> Checksum OK for top-3.5beta5.tar.gz. - ===> Installing for top-3.5beta5 - /usr/bin/install -o root -m 2755 -g kmem top /usr/pkg/bin - /usr/bin/install top.1 /usr/pkg/man/man1/top.1 - strip /usr/pkg/bin/top - ===> Registering installation for top-3.5beta5 - # - - - A.2 Packaging top - ================= - - # make package - >> Checksum OK for top-3.5beta5.tar.gz. - ===> Building package for top-3.5beta5 - Creating package top-3.5beta5.tgz - Registering depends:. - Creating gzip'd tar ball in '/u/pkgsrc/sysutils/top/top-3.5beta5.tgz' - - -====================================================== -Appendix B: Layout of the FTP server's package archive -====================================================== - -Layout for precompiled binary packages on ftp.netbsd.org: - -/pub/NetBSD/packages/ - README - distfiles/ - pkgsrc -> /pub/NetBSD/NetBSD-current/pkgsrc - 1.5/ - i386/ - All/ - archivers/ - foo -> ../All/foo - ... - m68k/ - All/ - archivers/ - foo -> ../All/foo - ... - amiga -> m68k - atari -> m68k - ... - - -To create: - - cd /usr/pkgsrc ; make install ; make package - - upload /usr/pkgsrc/packages to - ftp://ftp.netbsd.org/pub/NetBSD/packages/\ - `uname -r | sed 's@\.\([0-9]*\)[\._].*@\.\1@'`/`uname -p` - - if necessary ln -s `uname -m` `uname -p` - -Disk space needed: unknown. - -Packages for a release version of NetBSD should be uploaded to the -directory major.minor corresponding to the appropriate release. Packages -for NetBSD with versions such as "1.5.1" should be uploaded to the "1.5" -directory, stripping the tiny number off the directory name. For packages -that need to be tightly coupled with the OS Version, such as LKM's, you -may create a major.minor.tiny release directory, and place those packages -therein. Such packages should be marked with the variable -"OSVERSION_SPECIFIC=yes" to mark them in some way for binary package -builders. - - -########################################################################### -# Local Variables: -# mode: Text -# fill-column: 75 -# sentence-end-double-space: nil -# End: +pkgsrc.txt and pkgsrc.html are also provided in the top level pkgsrc +directory (this directory). |