summaryrefslogtreecommitdiff
path: root/cad
diff options
context:
space:
mode:
authordmcmahill <dmcmahill@pkgsrc.org>2004-10-02 05:25:18 +0000
committerdmcmahill <dmcmahill@pkgsrc.org>2004-10-02 05:25:18 +0000
commitdbb5b65a5b89889eb874b630c1b4baf256b5dc4c (patch)
treec28c0c660c187ce206c2ed7c439931bf81906729 /cad
parent91d3958fd67bf1c86280087b30ccb7a926c302f5 (diff)
downloadpkgsrc-dbb5b65a5b89889eb874b630c1b4baf256b5dc4c.tar.gz
import gsmc-1.1
gsmc is a GTK application that allow to do all the calculation usually done on a Smith Chart. It permits to make calculation for network composed by resistor, capacitor, inductance, and transmission line (also as stub). Network topology is limited to series, parallel and as trasmissive for trasmission line. No series connection are allowed in parallel branch, neither parallel connection in series branch. Trasmission line can be placed as quadrupole or as a parallel or series stub, either opened or shorted at the other end. Calculation procedure starts with setting the initial impedance to be matched, next network elements are added and tuned to obtain the desidered impedance value. The network so obtained can be saved in spice format for other analysis; current work can be saved for succesive retrieve. The initial (start) impedance is thought as "the load" so when adding a trasmission line placed as a quadrupole rotation is clockwise, going "toward generator"; generator is placed after the last network element, as can be seen from spice output.
Diffstat (limited to 'cad')
-rw-r--r--cad/gsmc/DESCR21
-rw-r--r--cad/gsmc/Makefile28
-rw-r--r--cad/gsmc/PLIST3
-rw-r--r--cad/gsmc/distinfo4
-rw-r--r--cad/gsmc/files/install-sh276
-rw-r--r--cad/gsmc/files/missing336
-rw-r--r--cad/gsmc/files/mkinstalldirs111
7 files changed, 779 insertions, 0 deletions
diff --git a/cad/gsmc/DESCR b/cad/gsmc/DESCR
new file mode 100644
index 00000000000..6b2ad1164b6
--- /dev/null
+++ b/cad/gsmc/DESCR
@@ -0,0 +1,21 @@
+gsmc is a GTK application that allow to do all the calculation
+usually done on a Smith Chart. It permits to make calculation
+for network composed by resistor, capacitor, inductance, and
+transmission line (also as stub). Network topology is
+limited to series, parallel and as trasmissive
+for trasmission line. No series connection are allowed in parallel
+branch, neither parallel connection in series branch.
+Trasmission line can be placed as quadrupole or as a parallel or
+series stub, either opened or shorted at the other end.
+
+Calculation procedure starts with setting the initial impedance to be
+matched, next network elements are added and tuned to obtain the
+desidered impedance value.
+
+The network so obtained can be saved in spice format for other analysis;
+current work can be saved for succesive retrieve.
+
+The initial (start) impedance is thought as "the load" so when
+adding a trasmission line placed as a quadrupole rotation is
+clockwise, going "toward generator"; generator is placed after the
+last network element, as can be seen from spice output.
diff --git a/cad/gsmc/Makefile b/cad/gsmc/Makefile
new file mode 100644
index 00000000000..227e08fe20e
--- /dev/null
+++ b/cad/gsmc/Makefile
@@ -0,0 +1,28 @@
+# $NetBSD: Makefile,v 1.1.1.1 2004/10/02 05:25:18 dmcmahill Exp $
+#
+
+DISTNAME= gsmc-1.1
+CATEGORIES= cad
+MASTER_SITES= http://www.qsl.net/ik5nax/
+
+MAINTAINER= tech-pkg@NetBSD.org
+HOMEPAGE= http://www.qsl.net/ik5nax/
+COMMENT= Smith charting program
+
+PKG_INSTALLATION_TYPES= overwrite pkgviews
+
+GNU_CONFIGURE= YES
+USE_BUILDLINK3= YES
+USE_GNU_TOOLS+= make
+
+# The following were just links in the distfile so
+# replace them with working copies.
+post-extract:
+.for f in install-sh missing mkinstalldirs
+ ${RM} -f ${WRKSRC}/${f}
+ ${CP} ${FILESDIR}/${f} ${WRKSRC}
+ ${CHMOD} 755 ${WRKSRC}/${f}
+.endfor
+
+.include "../../x11/gtk2/buildlink3.mk"
+.include "../../mk/bsd.pkg.mk"
diff --git a/cad/gsmc/PLIST b/cad/gsmc/PLIST
new file mode 100644
index 00000000000..c4f2eaebcb2
--- /dev/null
+++ b/cad/gsmc/PLIST
@@ -0,0 +1,3 @@
+@comment $NetBSD: PLIST,v 1.1.1.1 2004/10/02 05:25:18 dmcmahill Exp $
+bin/gsmc
+man/man1/gsmc.1
diff --git a/cad/gsmc/distinfo b/cad/gsmc/distinfo
new file mode 100644
index 00000000000..9333830007b
--- /dev/null
+++ b/cad/gsmc/distinfo
@@ -0,0 +1,4 @@
+$NetBSD: distinfo,v 1.1.1.1 2004/10/02 05:25:18 dmcmahill Exp $
+
+SHA1 (gsmc-1.1.tar.gz) = bff9098ecf8e40a720bcc2d60a868f7aaa2d3e59
+Size (gsmc-1.1.tar.gz) = 122714 bytes
diff --git a/cad/gsmc/files/install-sh b/cad/gsmc/files/install-sh
new file mode 100644
index 00000000000..36f96f3e033
--- /dev/null
+++ b/cad/gsmc/files/install-sh
@@ -0,0 +1,276 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission. M.I.T. makes no representations about the
+# suitability of this software for any purpose. It is provided "as is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch. It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+ case $1 in
+ -c) instcmd=$cpprog
+ shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -m) chmodcmd="$chmodprog $2"
+ shift
+ shift
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd=$stripprog
+ shift
+ continue;;
+
+ -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+ shift
+ continue;;
+
+ -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+ shift
+ continue;;
+
+ *) if [ x"$src" = x ]
+ then
+ src=$1
+ else
+ # this colon is to work around a 386BSD /bin/sh bug
+ :
+ dst=$1
+ fi
+ shift
+ continue;;
+ esac
+done
+
+if [ x"$src" = x ]
+then
+ echo "$0: no input file specified" >&2
+ exit 1
+else
+ :
+fi
+
+if [ x"$dir_arg" != x ]; then
+ dst=$src
+ src=""
+
+ if [ -d "$dst" ]; then
+ instcmd=:
+ chmodcmd=""
+ else
+ instcmd=$mkdirprog
+ fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad
+# if $src (and thus $dsttmp) contains '*'.
+
+ if [ -f "$src" ] || [ -d "$src" ]
+ then
+ :
+ else
+ echo "$0: $src does not exist" >&2
+ exit 1
+ fi
+
+ if [ x"$dst" = x ]
+ then
+ echo "$0: no destination specified" >&2
+ exit 1
+ else
+ :
+ fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+ if [ -d "$dst" ]
+ then
+ dst=$dst/`basename "$src"`
+ else
+ :
+ fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+# this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='
+ '
+IFS="${IFS-$defaultIFS}"
+
+oIFS=$IFS
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS=$oIFS
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+ pathcomp=$pathcomp$1
+ shift
+
+ if [ ! -d "$pathcomp" ] ;
+ then
+ $mkdirprog "$pathcomp"
+ else
+ :
+ fi
+
+ pathcomp=$pathcomp/
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+ $doit $instcmd "$dst" &&
+
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+ if [ x"$transformarg" = x ]
+ then
+ dstfile=`basename "$dst"`
+ else
+ dstfile=`basename "$dst" $transformbasename |
+ sed $transformarg`$transformbasename
+ fi
+
+# don't allow the sed command to completely eliminate the filename
+
+ if [ x"$dstfile" = x ]
+ then
+ dstfile=`basename "$dst"`
+ else
+ :
+ fi
+
+# Make a couple of temp file names in the proper directory.
+
+ dsttmp=$dstdir/#inst.$$#
+ rmtmp=$dstdir/#rm.$$#
+
+# Trap to clean up temp files at exit.
+
+ trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
+ trap '(exit $?); exit' 1 2 13 15
+
+# Move or copy the file name to the temp name
+
+ $doit $instcmd "$src" "$dsttmp" &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing. If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
+
+# Now remove or move aside any old file at destination location. We try this
+# two ways since rm can't unlink itself on some systems and the destination
+# file might be busy for other reasons. In this case, the final cleanup
+# might fail but the new file should still install successfully.
+
+{
+ if [ -f "$dstdir/$dstfile" ]
+ then
+ $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
+ $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
+ {
+ echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+ (exit 1); exit
+ }
+ else
+ :
+ fi
+} &&
+
+# Now rename the file to the real destination.
+
+ $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+
+fi &&
+
+# The final little trick to "correctly" pass the exit status to the exit trap.
+
+{
+ (exit 0); exit
+}
diff --git a/cad/gsmc/files/missing b/cad/gsmc/files/missing
new file mode 100644
index 00000000000..6a37006e8f0
--- /dev/null
+++ b/cad/gsmc/files/missing
@@ -0,0 +1,336 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
+
+case "$1" in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ tar try tar, gnutar, gtar, then tar without non-portable flags
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing 0.4 - GNU automake"
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+ aclocal*)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case "$f" in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+ system. You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1Help2man' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+ test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
+ bison|yacc)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f y.tab.h ]; then
+ echo >y.tab.h
+ fi
+ if [ ! -f y.tab.c ]; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex|flex)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f lex.yy.c ]; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+ fi
+ if [ -f "$file" ]; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit 1
+ fi
+ ;;
+
+ makeinfo)
+ if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
+ # We have makeinfo, but it failed.
+ exit 1
+ fi
+
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+ fi
+ touch $file
+ ;;
+
+ tar)
+ shift
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ fi
+
+ # We have already tried tar in the generic part.
+ # Look for gnutar/gtar before invocation to avoid ugly error
+ # messages.
+ if (gnutar --version > /dev/null 2>&1); then
+ gnutar "$@" && exit 0
+ fi
+ if (gtar --version > /dev/null 2>&1); then
+ gtar "$@" && exit 0
+ fi
+ firstarg="$1"
+ if shift; then
+ case "$firstarg" in
+ *o*)
+ firstarg=`echo "$firstarg" | sed s/o//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ case "$firstarg" in
+ *h*)
+ firstarg=`echo "$firstarg" | sed s/h//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ fi
+
+ echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+ You may want to install GNU tar or Free paxutils, or check the
+ command line arguments."
+ exit 1
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+ system. You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequirements for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
diff --git a/cad/gsmc/files/mkinstalldirs b/cad/gsmc/files/mkinstalldirs
new file mode 100644
index 00000000000..d2d5f21b611
--- /dev/null
+++ b/cad/gsmc/files/mkinstalldirs
@@ -0,0 +1,111 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain
+
+errstatus=0
+dirmode=""
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
+
+# process command line arguments
+while test $# -gt 0 ; do
+ case $1 in
+ -h | --help | --h*) # -h for help
+ echo "$usage" 1>&2
+ exit 0
+ ;;
+ -m) # -m PERM arg
+ shift
+ test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
+ dirmode=$1
+ shift
+ ;;
+ --) # stop option processing
+ shift
+ break
+ ;;
+ -*) # unknown option
+ echo "$usage" 1>&2
+ exit 1
+ ;;
+ *) # first non-opt arg
+ break
+ ;;
+ esac
+done
+
+for file
+do
+ if test -d "$file"; then
+ shift
+ else
+ break
+ fi
+done
+
+case $# in
+ 0) exit 0 ;;
+esac
+
+case $dirmode in
+ '')
+ if mkdir -p -- . 2>/dev/null; then
+ echo "mkdir -p -- $*"
+ exec mkdir -p -- "$@"
+ fi
+ ;;
+ *)
+ if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
+ echo "mkdir -m $dirmode -p -- $*"
+ exec mkdir -m "$dirmode" -p -- "$@"
+ fi
+ ;;
+esac
+
+for file
+do
+ set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+ shift
+
+ pathcomp=
+ for d
+ do
+ pathcomp="$pathcomp$d"
+ case $pathcomp in
+ -*) pathcomp=./$pathcomp ;;
+ esac
+
+ if test ! -d "$pathcomp"; then
+ echo "mkdir $pathcomp"
+
+ mkdir "$pathcomp" || lasterr=$?
+
+ if test ! -d "$pathcomp"; then
+ errstatus=$lasterr
+ else
+ if test ! -z "$dirmode"; then
+ echo "chmod $dirmode $pathcomp"
+ lasterr=""
+ chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+ if test ! -z "$lasterr"; then
+ errstatus=$lasterr
+ fi
+ fi
+ fi
+ fi
+
+ pathcomp="$pathcomp/"
+ done
+done
+
+exit $errstatus
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# End:
+# mkinstalldirs ends here