Over 1200 files touched but no revisions bumped :)

RECOMMENDED is removed. It becomes ABI_DEPENDS.

BUILDLINK_RECOMMENDED.foo becomes BUILDLINK_ABI_DEPENDS.foo.

BUILDLINK_DEPENDS.foo becomes BUILDLINK_API_DEPENDS.foo.

BUILDLINK_DEPENDS does not change.

IGNORE_RECOMMENDED (which defaulted to "no") becomes USE_ABI_DEPENDS
which defaults to "yes".

Added to obsolete.mk checking for IGNORE_RECOMMENDED.

I did not manually go through and fix any aesthetic tab/spacing issues.

I have tested the above patch on DragonFly building and packaging
subversion and pkglint and their many dependencies.

I have also tested USE_ABI_DEPENDS=no on my NetBSD workstation (where I
have used IGNORE_RECOMMENDED for a long time). I have been an active user
of IGNORE_RECOMMENDED since it was available.

As suggested, I removed the documentation sentences suggesting bumping for
"security" issues.

As discussed on tech-pkg.

I will commit to revbump, pkglint, pkg_install, createbuildlink separately.

Note that if you use wip, it will fail!  I will commit to pkgsrc-wip
later (within day).

6 files changed, 15 insertions, 15 deletions

diff --git a/cad/gplcver/buildlink3.mk b/cad/gplcver/buildlink3.mk
index 4722b6f22a0..94a88e102f2 100644
--- a/cad/gplcver/buildlink3.mk
+++ b/cad/gplcver/buildlink3.mk
@@ -1,4 +1,4 @@
-# $NetBSD: buildlink3.mk,v 1.1.1.1 2006/02/10 16:37:51 drochner Exp $
+# $NetBSD: buildlink3.mk,v 1.2 2006/04/06 06:21:38 reed Exp $
 # XXX
 # XXX This file was created automatically using createbuildlink-3.10.
 # XXX After this file has been verified as correct, the comment lines
@@ -21,7 +21,7 @@ BUILDLINK_PACKAGES:=	${BUILDLINK_PACKAGES:Ngplcver}
 BUILDLINK_PACKAGES+=	gplcver
 
 .if !empty(GPLCVER_BUILDLINK3_MK:M+)
-BUILDLINK_DEPENDS.gplcver+=	gplcver>=2.11a
+BUILDLINK_API_DEPENDS.gplcver+=	gplcver>=2.11a
 BUILDLINK_PKGSRCDIR.gplcver?=	../../cad/gplcver
 .endif	# GPLCVER_BUILDLINK3_MK
 
diff --git a/cad/libgeda/buildlink3.mk b/cad/libgeda/buildlink3.mk
index 79e7d523b9c..55c13b80290 100644
--- a/cad/libgeda/buildlink3.mk
+++ b/cad/libgeda/buildlink3.mk
@@ -1,4 +1,4 @@
-# $NetBSD: buildlink3.mk,v 1.13 2006/02/11 02:40:49 dmcmahill Exp $
+# $NetBSD: buildlink3.mk,v 1.14 2006/04/06 06:21:38 reed Exp $
 
 BUILDLINK_DEPTH:=	${BUILDLINK_DEPTH}+
 LIBGEDA_BUILDLINK3_MK:=	${LIBGEDA_BUILDLINK3_MK}+
@@ -11,8 +11,8 @@ BUILDLINK_PACKAGES:=	${BUILDLINK_PACKAGES:Nlibgeda}
 BUILDLINK_PACKAGES+=	libgeda
 
 .if !empty(LIBGEDA_BUILDLINK3_MK:M+)
-BUILDLINK_DEPENDS.libgeda+=	libgeda-20060123{,nb[0-9]*}
-BUILDLINK_RECOMMENDED.libgeda?=	libgeda>=20060123nb1
+BUILDLINK_API_DEPENDS.libgeda+=	libgeda-20060123{,nb[0-9]*}
+BUILDLINK_ABI_DEPENDS.libgeda?=	libgeda>=20060123nb1
 BUILDLINK_PKGSRCDIR.libgeda?=	../../cad/libgeda
 .endif	# LIBGEDA_BUILDLINK3_MK
 
diff --git a/cad/libwcalc/buildlink3.mk b/cad/libwcalc/buildlink3.mk
index 9ae49141ed3..7b543fe4d3c 100644
--- a/cad/libwcalc/buildlink3.mk
+++ b/cad/libwcalc/buildlink3.mk
@@ -1,4 +1,4 @@
-# $NetBSD: buildlink3.mk,v 1.3 2006/02/05 23:08:22 joerg Exp $
+# $NetBSD: buildlink3.mk,v 1.4 2006/04/06 06:21:38 reed Exp $
 #
 
 BUILDLINK_DEPTH:=		${BUILDLINK_DEPTH}+
@@ -12,8 +12,8 @@ BUILDLINK_PACKAGES:=	${BUILDLINK_PACKAGES:Nlibwcalc}
 BUILDLINK_PACKAGES+=	libwcalc
 
 .if !empty(LIBWCALC_BUILDLINK3_MK:M+)
-BUILDLINK_DEPENDS.libwcalc+=	libwcalc-1.0*
-BUILDLINK_RECOMMENDED.libwcalc?=	libwcalc>=1.0nb1
+BUILDLINK_API_DEPENDS.libwcalc+=	libwcalc-1.0*
+BUILDLINK_ABI_DEPENDS.libwcalc?=	libwcalc>=1.0nb1
 BUILDLINK_PKGSRCDIR.libwcalc?=	../../cad/libwcalc
 .endif	# LIBWCALC_BUILDLINK3_MK
 
diff --git a/cad/spice/Makefile b/cad/spice/Makefile
index 7a7054c1068..f2bed6f9482 100644
--- a/cad/spice/Makefile
+++ b/cad/spice/Makefile
@@ -1,4 +1,4 @@
-# $NetBSD: Makefile,v 1.33 2006/02/05 23:08:22 joerg Exp $
+# $NetBSD: Makefile,v 1.34 2006/04/06 06:21:38 reed Exp $
 
 DISTNAME=	sp3f4.kit
 PKGNAME=	spice-3f5.1
@@ -15,7 +15,7 @@ COMMENT=	General-purpose circuit simulation program
 WRKSRC=			${WRKDIR}
 # GPL license used by GNU readline is not compatible
 # with 4 clause BSD license used by spice.
-#BUILDLINK_DEPENDS.readline=	readline>=4.0
+#BUILDLINK_API_DEPENDS.readline=	readline>=4.0
 #USE_GNU_READLINE=	uses rl_* interface
 
 # documentation in ftp://ic.eecs.berkeley.edu/pub/Spice3/um.3f3.ps
diff --git a/cad/verilog-current/buildlink3.mk b/cad/verilog-current/buildlink3.mk
index 1095e4cf003..7fa05c0b2c0 100644
--- a/cad/verilog-current/buildlink3.mk
+++ b/cad/verilog-current/buildlink3.mk
@@ -1,4 +1,4 @@
-# $NetBSD: buildlink3.mk,v 1.3 2006/02/05 23:08:23 joerg Exp $
+# $NetBSD: buildlink3.mk,v 1.4 2006/04/06 06:21:38 reed Exp $
 
 BUILDLINK_DEPTH:=		${BUILDLINK_DEPTH}+
 VERILOG_CURRENT_BUILDLINK3_MK:=	${VERILOG_CURRENT_BUILDLINK3_MK}+
@@ -11,8 +11,8 @@ BUILDLINK_PACKAGES:=	${BUILDLINK_PACKAGES:Nverilog-current}
 BUILDLINK_PACKAGES+=	verilog-current
 
 .if !empty(VERILOG_CURRENT_BUILDLINK3_MK:M+)
-BUILDLINK_DEPENDS.verilog-current+=	verilog-current>=20021019
-BUILDLINK_RECOMMENDED.verilog-current?=	verilog-current>=20060124nb1
+BUILDLINK_API_DEPENDS.verilog-current+=	verilog-current>=20021019
+BUILDLINK_ABI_DEPENDS.verilog-current?=	verilog-current>=20060124nb1
 BUILDLINK_PKGSRCDIR.verilog-current?=	../../cad/verilog-current
 .endif	# VERILOG_CURRENT_BUILDLINK3_MK
 
diff --git a/cad/verilog/buildlink3.mk b/cad/verilog/buildlink3.mk
index 735d56d97ae..2f2acdb2fb0 100644
--- a/cad/verilog/buildlink3.mk
+++ b/cad/verilog/buildlink3.mk
@@ -1,4 +1,4 @@
-# $NetBSD: buildlink3.mk,v 1.1 2006/02/10 16:53:36 drochner Exp $
+# $NetBSD: buildlink3.mk,v 1.2 2006/04/06 06:21:38 reed Exp $
 # XXX
 # XXX This file was created automatically using createbuildlink-3.10.
 # XXX After this file has been verified as correct, the comment lines
@@ -21,7 +21,7 @@ BUILDLINK_PACKAGES:=	${BUILDLINK_PACKAGES:Nverilog}
 BUILDLINK_PACKAGES+=	verilog
 
 .if !empty(VERILOG_BUILDLINK3_MK:M+)
-BUILDLINK_DEPENDS.verilog+=	verilog>=0.8.1nb1
+BUILDLINK_API_DEPENDS.verilog+=	verilog>=0.8.1nb1
 BUILDLINK_PKGSRCDIR.verilog?=	../../cad/verilog
 .endif	# VERILOG_BUILDLINK3_MK