all: migrate some SourceForge homepage URLs back from https to http

https://mail-index.netbsd.org/pkgsrc-changes/2020/01/18/msg205146.html

In the above commit, the homepage URLs were migrated from http to https,
assuming that SourceForge would use the same host names for both http and
https connections. This assumption was wrong. Their documentation at
https://sourceforge.net/p/forge/documentation/Custom%20VHOSTs/ states
that the https URLs use the domain sourceforge.io instead.

To make the homepages from the above commit reachable again, pkglint has
been extended to check for reachable homepages. This check is only
enabled when the --network command line option is given.

Each of the homepages that referred to https://$project.sourceforge.net
before was migrated to https://$project.sourceforge.io (27), and if that
was not reachable, to the fallback URL http://$project.sourceforge.net
(163).

11 files changed, 22 insertions, 22 deletions

diff --git a/cad/adms/Makefile b/cad/adms/Makefile
index f6f06c32262..9ffd994ca14 100644
--- a/cad/adms/Makefile
+++ b/cad/adms/Makefile
@@ -1,4 +1,4 @@
-# $NetBSD: Makefile,v 1.10 2020/01/18 23:30:09 rillig Exp $
+# $NetBSD: Makefile,v 1.11 2020/01/26 05:26:15 rillig Exp $
 #
 
 DISTNAME=	adms-2.2.5
@@ -7,7 +7,7 @@ CATEGORIES=	cad
 MASTER_SITES=	${MASTER_SITE_SOURCEFORGE:=mot-adms/}
 
 MAINTAINER=	dmcmahill@NetBSD.org
-HOMEPAGE=	https://mot-adms.sourceforge.net/
+HOMEPAGE=	http://mot-adms.sourceforge.net/
 COMMENT=	Compact device model code generator for SPICE
 
 AUTOMAKE_OVERRIDE=	NO
diff --git a/cad/atlc/Makefile b/cad/atlc/Makefile
index df569f0973f..5b064a957f9 100644
--- a/cad/atlc/Makefile
+++ b/cad/atlc/Makefile
@@ -1,4 +1,4 @@
-# $NetBSD: Makefile,v 1.16 2020/01/18 23:30:09 rillig Exp $
+# $NetBSD: Makefile,v 1.17 2020/01/26 05:26:15 rillig Exp $
 #
 
 DISTNAME=	atlc-4.6.0
@@ -7,7 +7,7 @@ CATEGORIES=	cad
 MASTER_SITES=	${MASTER_SITE_SOURCEFORGE:=atlc/}
 
 MAINTAINER=	dmcmahill@NetBSD.org
-HOMEPAGE=	https://atlc.sourceforge.net/
+HOMEPAGE=	http://atlc.sourceforge.net/
 COMMENT=	Calculates the impedance of arbitrary cross section transmission lines
 
 MAKE_JOBS_SAFE=		no
diff --git a/cad/cascade/Makefile b/cad/cascade/Makefile
index 55df638314a..924fb5825f4 100644
--- a/cad/cascade/Makefile
+++ b/cad/cascade/Makefile
@@ -1,4 +1,4 @@
-# $NetBSD: Makefile,v 1.11 2020/01/18 23:30:10 rillig Exp $
+# $NetBSD: Makefile,v 1.12 2020/01/26 05:26:15 rillig Exp $
 #
 
 DISTNAME=	cascade-1.4
@@ -7,7 +7,7 @@ CATEGORIES=	cad
 MASTER_SITES=	${MASTER_SITE_SOURCEFORGE:=rfcascade/}
 
 MAINTAINER=	dmcmahill@NetBSD.org
-HOMEPAGE=	https://rfcascade.sourceforge.net/
+HOMEPAGE=	http://rfcascade.sourceforge.net/
 COMMENT=	Simple tool to analyze noise and distortion of a RF system
 
 GNU_CONFIGURE=	YES
diff --git a/cad/covered/Makefile b/cad/covered/Makefile
index bf7da6b4d28..6d6af7b8534 100644
--- a/cad/covered/Makefile
+++ b/cad/covered/Makefile
@@ -1,4 +1,4 @@
-# $NetBSD: Makefile,v 1.28 2020/01/18 23:30:10 rillig Exp $
+# $NetBSD: Makefile,v 1.29 2020/01/26 05:26:15 rillig Exp $
 #
 
 DISTNAME=	covered-0.7.10
@@ -7,7 +7,7 @@ CATEGORIES=	cad
 MASTER_SITES=	${MASTER_SITE_SOURCEFORGE:=covered/}
 
 MAINTAINER=	dmcmahill@NetBSD.org
-HOMEPAGE=	https://covered.sourceforge.net/
+HOMEPAGE=	http://covered.sourceforge.net/
 COMMENT=	Verilog code coverage analyzer (stable release version)
 LICENSE=	gnu-gpl-v2
 
diff --git a/cad/felt/Makefile b/cad/felt/Makefile
index f54976f012f..e16214a6ab4 100644
--- a/cad/felt/Makefile
+++ b/cad/felt/Makefile
@@ -1,4 +1,4 @@
-# $NetBSD: Makefile,v 1.41 2020/01/18 23:30:10 rillig Exp $
+# $NetBSD: Makefile,v 1.42 2020/01/26 05:26:16 rillig Exp $
 
 DISTNAME=		felt-3.05.src
 PKGNAME=		felt-3.05
@@ -8,7 +8,7 @@ MASTER_SITES=		${MASTER_SITE_SOURCEFORGE:=felt/}
 DISTFILES=		felt-3.05.src.tar.gz felt-3.05.ps.gz
 
 MAINTAINER=		pkgsrc-users@NetBSD.org
-HOMEPAGE=		https://felt.sourceforge.net/
+HOMEPAGE=		http://felt.sourceforge.net/
 COMMENT=		Free system for introductory level finite element analysis
 
 EXTRACT_ONLY=		felt-3.05.src.tar.gz
diff --git a/cad/gtkwave/Makefile b/cad/gtkwave/Makefile
index 5904f762192..a98907b2860 100644
--- a/cad/gtkwave/Makefile
+++ b/cad/gtkwave/Makefile
@@ -1,4 +1,4 @@
-# $NetBSD: Makefile,v 1.103 2020/01/18 23:30:10 rillig Exp $
+# $NetBSD: Makefile,v 1.104 2020/01/26 05:26:16 rillig Exp $
 #
 
 DISTNAME=		gtkwave-3.3.103
@@ -7,7 +7,7 @@ MASTER_SITES=		${MASTER_SITE_SOURCEFORGE:=gtkwave/}
 #MASTER_SITES=		http://home.nc.rr.com/gtkwave/
 
 MAINTAINER=		pkgsrc-users@NetBSD.org
-HOMEPAGE=		https://gtkwave.sourceforge.net/
+HOMEPAGE=		http://gtkwave.sourceforge.net/
 COMMENT=		Electronic waveform viewer
 LICENSE=		gnu-gpl-v3
 
diff --git a/cad/mcalc/Makefile b/cad/mcalc/Makefile
index 6d71697809d..f1ed36222c7 100644
--- a/cad/mcalc/Makefile
+++ b/cad/mcalc/Makefile
@@ -1,4 +1,4 @@
-# $NetBSD: Makefile,v 1.11 2020/01/18 23:30:10 rillig Exp $
+# $NetBSD: Makefile,v 1.12 2020/01/26 05:26:16 rillig Exp $
 #
 
 DISTNAME=	mcalc-1.6
@@ -6,7 +6,7 @@ CATEGORIES=	cad
 MASTER_SITES=	${MASTER_SITE_SOURCEFORGE:=mcalc/}
 
 MAINTAINER=	dmcmahill@NetBSD.org
-HOMEPAGE=	https://mcalc.sourceforge.net/
+HOMEPAGE=	http://mcalc.sourceforge.net/
 COMMENT=	JavaScript based microstrip analysis/synthesis calculator
 
 NO_BUILD=	yes
diff --git a/cad/ng-spice/Makefile b/cad/ng-spice/Makefile
index f6f9a23c0da..f0b0e8bef29 100644
--- a/cad/ng-spice/Makefile
+++ b/cad/ng-spice/Makefile
@@ -1,4 +1,4 @@
-# $NetBSD: Makefile,v 1.47 2020/01/18 23:30:10 rillig Exp $
+# $NetBSD: Makefile,v 1.48 2020/01/26 05:26:16 rillig Exp $
 
 DISTNAME=	ngspice-31
 PKGNAME=	ng-spice-31
@@ -7,7 +7,7 @@ CATEGORIES=	cad
 MASTER_SITES=	${MASTER_SITE_SOURCEFORGE:=ngspice/}
 
 MAINTAINER=	dmcmahill@NetBSD.org
-HOMEPAGE=	https://ngspice.sourceforge.net/
+HOMEPAGE=	http://ngspice.sourceforge.net/
 COMMENT=	Next generation circuit simulation program
 
 USE_LIBTOOL=		YES
diff --git a/cad/tnt-mmtl/Makefile b/cad/tnt-mmtl/Makefile
index dae69b3468a..1dd2ec0605e 100644
--- a/cad/tnt-mmtl/Makefile
+++ b/cad/tnt-mmtl/Makefile
@@ -1,4 +1,4 @@
-# $NetBSD: Makefile,v 1.31 2020/01/18 23:30:11 rillig Exp $
+# $NetBSD: Makefile,v 1.32 2020/01/26 05:26:16 rillig Exp $
 
 DISTNAME=	tnt-1.2.2
 PKGNAME=	${DISTNAME:S/tnt/tnt-mmtl/}
@@ -7,7 +7,7 @@ CATEGORIES=	cad
 MASTER_SITES=	${MASTER_SITE_SOURCEFORGE:=mmtl/}
 
 MAINTAINER=	dmcmahill@NetBSD.org
-HOMEPAGE=	https://mmtl.sourceforge.net/
+HOMEPAGE=	http://mmtl.sourceforge.net/
 COMMENT=	Multilayer Multiconductor Transmission Line 2-D and 2.5-D simulator
 
 BUILD_DEPENDS+=	latex2html-[0-9]*:../../textproc/latex2html
diff --git a/cad/transcalc/Makefile b/cad/transcalc/Makefile
index a8134751e0a..7d86763a62f 100644
--- a/cad/transcalc/Makefile
+++ b/cad/transcalc/Makefile
@@ -1,4 +1,4 @@
-# $NetBSD: Makefile,v 1.52 2020/01/18 23:30:11 rillig Exp $
+# $NetBSD: Makefile,v 1.53 2020/01/26 05:26:16 rillig Exp $
 #
 
 DISTNAME=	transcalc-0.14
@@ -8,7 +8,7 @@ MASTER_SITES=	http://transcalc.sourceforge.net/
 #MASTER_SITES=	${MASTER_SITE_SOURCEFORGE:=transcalc/}
 
 MAINTAINER=	dmcmahill@NetBSD.org
-HOMEPAGE=	https://transcalc.sourceforge.net/
+HOMEPAGE=	http://transcalc.sourceforge.net/
 COMMENT=	Transmission line analysis/synthesis
 
 GNU_CONFIGURE=	YES
diff --git a/cad/wcalc/Makefile.common b/cad/wcalc/Makefile.common
index 14a33391263..979fb003567 100644
--- a/cad/wcalc/Makefile.common
+++ b/cad/wcalc/Makefile.common
@@ -1,4 +1,4 @@
-# $NetBSD: Makefile.common,v 1.11 2020/01/18 23:30:11 rillig Exp $
+# $NetBSD: Makefile.common,v 1.12 2020/01/26 05:26:16 rillig Exp $
 #
 # used by cad/wcalc/Makefile
 # used by cad/wcalc-docs/Makefile
@@ -15,7 +15,7 @@ CATEGORIES=	cad
 MASTER_SITES=	${MASTER_SITE_SOURCEFORGE:=wcalc/}
 
 MAINTAINER=	dmcmahill@NetBSD.org
-HOMEPAGE=	https://wcalc.sourceforge.net/
+HOMEPAGE=	http://wcalc.sourceforge.net/
 
 DISTINFO_FILE=	${.CURDIR}/../../cad/wcalc/distinfo
 PATCHDIR=	${.CURDIR}/../../cad/wcalc/patches