ALL_TARGET -> BUILD_TARGET.

3 files changed, 18 insertions, 18 deletions

diff --git a/doc/guide/files/build.xml b/doc/guide/files/build.xml
index 1bba7dc7679..3e055b6e805 100644
--- a/doc/guide/files/build.xml
+++ b/doc/guide/files/build.xml
@@ -1,4 +1,4 @@
-<!-- $NetBSD: build.xml,v 1.2 2004/11/22 16:50:01 wiz Exp $ -->
+<!-- $NetBSD: build.xml,v 1.3 2004/12/03 12:48:15 wiz Exp $ -->
 
 <chapter id="build">
   <title>The build process</title>
@@ -278,11 +278,11 @@ CONFIGURE_ARGS+=        netbsd13</programlisting>
 	<listitem>
 	  <para>Once configuration has taken place, the software will be built 
 	    by invoking <varname>$MAKE_PROGRAM</varname> on
-	    <varname>$MAKEFILE</varname> with <varname>$ALL_TARGET</varname> as
+	    <varname>$MAKEFILE</varname> with <varname>$BUILD_TARGET</varname> as
 	    the target to build.  The default <varname>MAKE_PROGRAM</varname> is
 	    <quote>gmake</quote> if <varname>USE_GNU_TOOLS</varname> contains <quote>make</quote>,
 	    <quote>make</quote> otherwise. <varname>MAKEFILE</varname> is set to
-	    <quote>Makefile</quote> by default, and <varname>ALL_TARGET</varname>
+	    <quote>Makefile</quote> by default, and <varname>BUILD_TARGET</varname>
 	    defaults to <quote>all</quote>.  Any of these variables
 	    can be set in the package's Makefile to change the default
 	    build process.</para> 
diff --git a/doc/pkgsrc.html b/doc/pkgsrc.html
index f8ca6b66454..6a4c8b6426f 100644
--- a/doc/pkgsrc.html
+++ b/doc/pkgsrc.html
@@ -4297,7 +4297,7 @@ CONF_FILES=   ${EGDIR}/Muttrc ${PKG_SYSCONFDIR}/Muttrc
           audit-packages installation procedure:</p>
           <pre class="screen">
 ===========================================================================
-$NetBSD: pkgsrc.html,v 1.8 2004/12/01 09:52:59 wiz Exp $
+$NetBSD: pkgsrc.html,v 1.9 2004/12/02 22:23:46 dillo Exp $
 
 You may wish to have the vulnerabilities file downloaded daily so that
 it remains current.  This may be done by adding an appropriate entry
@@ -5332,7 +5332,7 @@ WRKSRC=         ${WRKDIR}/${DISTNAME}/unix
           <p>Be sure to add a RCS ID line as the first thing in any
           <code class="filename">PLIST</code> file you write:</p>
           <pre class="programlisting">
-@comment $NetBSD: pkgsrc.html,v 1.8 2004/12/01 09:52:59 wiz Exp $
+@comment $NetBSD: pkgsrc.html,v 1.9 2004/12/02 22:23:46 dillo Exp $
 </pre>
         </div>
 
@@ -6007,7 +6007,7 @@ DEPENDS+=       foo&gt;=1.1.0:../../category/foo
             "filename">buildlink3.mk</code> is taken from
             <code class="filename">pkgsrc/graphics/tiff</code>:</p>
             <pre class="programlisting">
-# $NetBSD: pkgsrc.html,v 1.8 2004/12/01 09:52:59 wiz Exp $
+# $NetBSD: pkgsrc.html,v 1.9 2004/12/02 22:23:46 dillo Exp $
 
 BUILDLINK_DEPTH:=       ${BUILDLINK_DEPTH}+
 TIFF_BUILDLINK3_MK:=    ${TIFF_BUILDLINK3_MK}+
@@ -7122,7 +7122,7 @@ CONFIGURE_ARGS+=        netbsd13
                 will be built by invoking <code class=
                 "varname">$MAKE_PROGRAM</code> on <code class=
                 "varname">$MAKEFILE</code> with <code class=
-                "varname">$ALL_TARGET</code> as the target to
+                "varname">$BUILD_TARGET</code> as the target to
                 build. The default <code class=
                 "varname">MAKE_PROGRAM</code> is
                 &#8220;<span class="quote">gmake</span>&#8221; if
@@ -7132,7 +7132,7 @@ CONFIGURE_ARGS+=        netbsd13
                 otherwise. <code class="varname">MAKEFILE</code> is
                 set to &#8220;<span class=
                 "quote">Makefile</span>&#8221; by default, and
-                <code class="varname">ALL_TARGET</code> defaults to
+                <code class="varname">BUILD_TARGET</code> defaults to
                 &#8220;<span class="quote">all</span>&#8221;. Any
                 of these variables can be set in the package's
                 Makefile to change the default build process.</p>
@@ -10512,7 +10512,7 @@ PERL5_PACKLIST=   ${PERL5_SITEARCH}/auto/Pg/.packlist
             </div>
           </div>
           <pre class="programlisting">
-# $NetBSD: pkgsrc.html,v 1.8 2004/12/01 09:52:59 wiz Exp $
+# $NetBSD: pkgsrc.html,v 1.9 2004/12/02 22:23:46 dillo Exp $
 #
 
 DISTNAME=       bison-1.25
@@ -10557,7 +10557,7 @@ of the NetBSD source tree is beyond me.
             </div>
           </div>
           <pre class="programlisting">
-@comment $NetBSD: pkgsrc.html,v 1.8 2004/12/01 09:52:59 wiz Exp $
+@comment $NetBSD: pkgsrc.html,v 1.9 2004/12/02 22:23:46 dillo Exp $
 bin/bison
 man/man1/bison.1.gz
 info/bison.info
diff --git a/doc/pkgsrc.txt b/doc/pkgsrc.txt
index 70f76ac5a1b..3fd386d5e8b 100644
--- a/doc/pkgsrc.txt
+++ b/doc/pkgsrc.txt
@@ -14,7 +14,7 @@ The pkgsrc Developers
 
 Copyright (C) 1994-2004 The NetBSD Foundation, Inc
 
-$NetBSD: pkgsrc.txt,v 1.8 2004/12/01 09:52:59 wiz Exp $
+$NetBSD: pkgsrc.txt,v 1.9 2004/12/02 22:23:47 dillo Exp $
 
 Abstract
 
@@ -1663,7 +1663,7 @@ The following message is displayed as part of the audit-packages installation
 procedure:
 
 ===========================================================================
-$NetBSD: pkgsrc.txt,v 1.8 2004/12/01 09:52:59 wiz Exp $
+$NetBSD: pkgsrc.txt,v 1.9 2004/12/02 22:23:47 dillo Exp $
 
 You may wish to have the vulnerabilities file downloaded daily so that
 it remains current.  This may be done by adding an appropriate entry
@@ -2079,7 +2079,7 @@ the PLIST file (or files, see below!).
 
 Be sure to add a RCS ID line as the first thing in any PLIST file you write:
 
-@comment $NetBSD: pkgsrc.txt,v 1.8 2004/12/01 09:52:59 wiz Exp $
+@comment $NetBSD: pkgsrc.txt,v 1.9 2004/12/02 22:23:47 dillo Exp $
 
 8.2. Semi-automatic PLIST generation
 
@@ -2354,7 +2354,7 @@ following command will generate a good starting point for buildlink3.mk files:
 The following real-life example buildlink3.mk is taken from pkgsrc/graphics/
 tiff:
 
-# $NetBSD: pkgsrc.txt,v 1.8 2004/12/01 09:52:59 wiz Exp $
+# $NetBSD: pkgsrc.txt,v 1.9 2004/12/02 22:23:47 dillo Exp $
 
 BUILDLINK_DEPTH:=       ${BUILDLINK_DEPTH}+
 TIFF_BUILDLINK3_MK:=    ${TIFF_BUILDLINK3_MK}+
@@ -2873,9 +2873,9 @@ configure
 build
 
     Once configuration has taken place, the software will be built by invoking
-    $MAKE_PROGRAM on $MAKEFILE with $ALL_TARGET as the target to build. The
+    $MAKE_PROGRAM on $MAKEFILE with $BUILD_TARGET as the target to build. The
     default MAKE_PROGRAM is "gmake" if USE_GNU_TOOLS contains "make", "make"
-    otherwise. MAKEFILE is set to "Makefile" by default, and ALL_TARGET
+    otherwise. MAKEFILE is set to "Makefile" by default, and BUILD_TARGET
     defaults to "all". Any of these variables can be set in the package's
     Makefile to change the default build process.
 
@@ -4316,7 +4316,7 @@ A.1. files
 
 A.1.1. Makefile
 
-# $NetBSD: pkgsrc.txt,v 1.8 2004/12/01 09:52:59 wiz Exp $
+# $NetBSD: pkgsrc.txt,v 1.9 2004/12/02 22:23:47 dillo Exp $
 #
 
 DISTNAME=       bison-1.25
@@ -4340,7 +4340,7 @@ of the NetBSD source tree is beyond me.
 
 A.1.3. PLIST
 
-@comment $NetBSD: pkgsrc.txt,v 1.8 2004/12/01 09:52:59 wiz Exp $
+@comment $NetBSD: pkgsrc.txt,v 1.9 2004/12/02 22:23:47 dillo Exp $
 bin/bison
 man/man1/bison.1.gz
 info/bison.info