Remove packages scheduled to be deleted according to the pkgsrc-2011Q2

release notes.

7 files changed, 1 insertions, 216 deletions

diff --git a/mail/Makefile b/mail/Makefile
index 3726e1b8728..d9e45a6051d 100644
--- a/mail/Makefile
+++ b/mail/Makefile
@@ -1,4 +1,4 @@
-# $NetBSD: Makefile,v 1.413 2011/09/16 12:07:32 obache Exp $
+# $NetBSD: Makefile,v 1.414 2011/10/02 14:11:51 wiz Exp $
 #
 
 COMMENT=	Electronic mail utilities
@@ -137,7 +137,6 @@ SUBDIR+=	mailfront
 SUBDIR+=	mailgraph
 SUBDIR+=	mailhops
 SUBDIR+=	mailman
-SUBDIR+=	mailscanner
 SUBDIR+=	mailserv
 SUBDIR+=	mailsync
 SUBDIR+=	mailwrapper
diff --git a/mail/mailscanner/DESCR b/mail/mailscanner/DESCR
deleted file mode 100644
index 39038a926d5..00000000000
--- a/mail/mailscanner/DESCR
+++ /dev/null
@@ -1,22 +0,0 @@
-MailScanner is a complete e-mail security system designed for use on
-e-mail gateways. It protects against viruses, and detects attacks against
-e-mail client packages (such as Outlook, Outlook Express, Eudora). It
-can also detect almost all unsolicited commercial e-mail (spam) passing
-through it and respond to all incidents in a wide variety of ways.
-
-Not only can it scan for known viruses, but it can also protect against
-unknown viruses hidden inside e-mail attachments by refusing entry to
-attachments whose filenames match any given pattern. This can include
-generic patterns that trap filenames attempting to hide the true filename
-extension (e.g. ".txt.vbs").
-
-It is superior to many commercial packages in its ability to handle
-attacks against itself, such as Denial Of Service attacks caused by
-messages containing the "Zip of Death". It is easy to install into an
-existing e-mail gateway, requiring very little knowledge of sendmail
-and no change to an existing sendmail configuration.
-
-MailScanner itself is entirely open source, but it uses widely known
-commercial virus scanning packages at its core. The other software it
-uses is all high quality open source software, leading to a system that
-can be trusted for performance and reliability.
diff --git a/mail/mailscanner/MESSAGE b/mail/mailscanner/MESSAGE
deleted file mode 100644
index e3b5c2ee617..00000000000
--- a/mail/mailscanner/MESSAGE
+++ /dev/null
@@ -1,23 +0,0 @@
-===========================================================================
-$NetBSD: MESSAGE,v 1.2 2004/09/25 04:18:06 grant Exp $
-
-See ${PREFIX}/share/doc/MailScanner/README and the MailScanner(8) and
-MailScanner.conf(5) man pages for further instructions.
-
-As MailScanner supports a wide variety of external 3rd party software,
-you must install other packages separately to achieve your desired
-MailScanner functionality.
-
-You need at the very least an MTA. You will probably also want SpamAssassin
-and/or a virus scanner. Some suggested packages are:
-
-	mail/spamassassin
-	mail/clamav
-	mail/p5-Mail-ClamAV
-
-You will need to edit at least the following config file before MailScanner
-will work correctly:
-
-	${PKG_SYSCONFDIR}/MailScanner.conf
-
-===========================================================================
diff --git a/mail/mailscanner/Makefile b/mail/mailscanner/Makefile
deleted file mode 100644
index 07ea555f947..00000000000
--- a/mail/mailscanner/Makefile
+++ /dev/null
@@ -1,144 +0,0 @@
-# $NetBSD: Makefile,v 1.15 2010/11/20 20:51:51 gls Exp $
-#
-
-DISTNAME=		MailScanner-4.30.3-2
-PKGNAME=		mailscanner-4.30.3.2
-PKGREVISION=		3
-CATEGORIES=		mail
-MASTER_SITES=		http://www.mailscanner.info/files/4/tar/
-
-MAINTAINER=		pkgsrc-users@NetBSD.org
-HOMEPAGE=		http://www.mailscanner.info/
-COMMENT=		Powerful spam/virus filter with many options
-
-PKG_DESTDIR_SUPPORT=	user-destdir
-
-WRKSRC=			${WRKDIR}/MailScanner-4.30.3
-
-PKG_SYSCONFSUBDIR=	MailScanner
-
-DEPENDS+=		p5-Archive-Zip-[0-9]*:../../archivers/p5-Archive-Zip
-DEPENDS+=		p5-Convert-BinHex-[0-9]*:../../converters/p5-Convert-BinHex
-DEPENDS+=		p5-Net-CIDR>=0.09:../../devel/p5-Net-CIDR
-DEPENDS+=		p5-MIME-tools>=0:../../mail/p5-MIME-tools
-DEPENDS+=		tnef>=1.0:../../mail/tnef
-
-NO_BUILD=		YES
-USE_TOOLS+=		perl:run bash:run
-REPLACE_BASH+=		 bin/update_virus_scanners
-REPLACE_PERL+=		bin/MailScanner
-REPLACE_PERL+=		lib/panda-wrapper lib/rav-wrapper lib/*-autoupdate
-
-DOCSDIR=		${LOCALBASE}/share/doc/MailScanner
-EGDIR=			${LOCALBASE}/share/examples/MailScanner
-LIBDIR=			${LOCALBASE}/lib/MailScanner
-LIBEXECDIR=		${LOCALBASE}/libexec/MailScanner
-
-OWN_DIRS=		${PKG_SYSCONFDIR}/CustomFunctions
-OWN_DIRS+=		${PKG_SYSCONFDIR}/rules
-
-PLIST_SUBST+=		DOCSDIR=${DOCSDIR:Q}
-PLIST_SUBST+=		EGDIR=${EGDIR:Q}
-PLIST_SUBST+=		LIBDIR=${LIBDIR:Q}
-PLIST_SUBST+=		LIBEXECDIR=${LIBEXECDIR:Q}
-
-PLIST_SRC=		${WRKDIR}/PLIST_DYNAMIC
-
-MS_CONFIG_FILES=	filename.rules.conf \
-			filetype.rules.conf spam.assassin.prefs.conf \
-			spam.lists.conf virus.scanners.conf \
-			rules/bounce.rules rules/spam.whitelist.rules
-
-CONF_FILES+=		${EGDIR}/MailScanner.conf ${PKG_SYSCONFDIR}/MailScanner.conf
-.for _f_ in ${MS_CONFIG_FILES}
-CONF_FILES+=		${EGDIR}/${_f_} ${PKG_SYSCONFDIR}/${_f_}
-.endfor
-
-RCD_SCRIPTS=		mailscanner
-
-SUBST_CLASSES+=		paths
-SUBST_STAGE.paths=	post-patch
-SUBST_FILES.paths=	bin/MailScanner etc/MailScanner.conf
-SUBST_FILES.paths+=	etc/virus.scanners.conf bin/update_virus_scanners
-SUBST_FILES.paths+=	lib/MailScanner/ConfigDefs.pl
-SUBST_SED.paths=	-e s,/opt/MailScanner/lib/MailScanner/CustomFunctions,${PKG_SYSCONFDIR}/CustomFunctions,g
-SUBST_SED.paths+=	-e s,/opt/MailScanner/lib,${LIBDIR},g
-SUBST_SED.paths+=	-e s,/opt/MailScanner/etc/reports,${EGDIR}/reports,g
-SUBST_SED.paths+=	-e s,/opt/MailScanner/etc,${PKG_SYSCONFDIR},g
-SUBST_SED.paths+=	-e s,/opt/MailScanner/var/MailScanner.pid,/var/run/MailScanner.pid,g
-SUBST_SED.paths+=	-e s,/opt/MailScanner/bin,${PREFIX}/bin,g
-
-.include "../../mk/bsd.prefs.mk"
-
-# XXX this could use some improvement
-.if ${OPSYS} == "NetBSD"
-SUBST_CLASSES+=		sendmail
-SUBST_STAGE.sendmail=	post-patch
-SUBST_FILES.sendmail=	bin/MailScanner etc/MailScanner.conf
-SUBST_FILES.sendmail+=	etc/virus.scanners.conf bin/update_virus_scanners
-SUBST_FILES.sendmail+=	lib/MailScanner/ConfigDefs.pl
-SUBST_SED.sendmail=	-e s,/usr/lib/sendmail,/usr/sbin/mailwrapper,g
-.endif
-
-SUBST_CLASSES+=		systemdefs
-SUBST_STAGE.systemdefs=	post-patch
-SUBST_FILES.systemdefs=	lib/MailScanner/SystemDefs.pm
-SUBST_SED.systemdefs=	-e s,/bin/cat,${CAT},g
-SUBST_SED.systemdefs=	-e s,/bin/cp,${CP},g
-SUBST_SED.systemdefs=	-e s,/bin/rm,${RM},g
-# we can't use sed from pkgsrc as it won't be registered as a
-# dependency. XXX tools.mk needs a way to tell us about this dependency.
-.if empty(SED:M${LOCALBASE}*)
-SUBST_SED.systemdefs=	-e s,/bin/sed,${SED},g
-.endif
-
-INSTALLATION_DIRS=	bin ${PKGMANDIR}/man5 ${PKGMANDIR}/man8
-
-# get rid of CVS backup files
-post-extract:
-	cd ${WRKSRC} && ${RM} -f */.#*
-
-do-install:
-	${INSTALL_DATA_DIR} ${DESTDIR}${EGDIR}
-	${INSTALL_DATA_DIR} ${DESTDIR}${EGDIR}/rules
-	${INSTALL_SCRIPT} ${WRKSRC}/bin/MailScanner ${DESTDIR}${PREFIX}/bin
-
-	${INSTALL_LIB_DIR} ${DESTDIR}${LIBEXECDIR}
-	${INSTALL_SCRIPT} ${WRKSRC}/bin/update_virus_scanners ${DESTDIR}${LIBEXECDIR}
-	cd ${WRKSRC}/lib && ${FIND} . -name "*-autoupdate" -exec ${INSTALL_SCRIPT} '{}' ${DESTDIR}${LIBEXECDIR} \;
-	cd ${WRKSRC}/lib && ${FIND} . -name "*-wrapper" -exec ${INSTALL_SCRIPT} '{}' ${DESTDIR}${LIBEXECDIR} \;
-
-	${INSTALL_DATA} ${WRKSRC}/etc/MailScanner.conf ${DESTDIR}${EGDIR}/MailScanner.conf
-.for _f_ in ${MS_CONFIG_FILES}
-	${INSTALL_DATA} ${WRKSRC}/etc/${_f_} ${DESTDIR}${EGDIR}
-.endfor
-	cd ${WRKSRC}/etc/rules && ${INSTALL_DATA} \
-		EXAMPLES README spam.whitelist.rules bounce.rules \
-		${DESTDIR}${EGDIR}/rules
-	cd ${WRKSRC}/etc && ${FIND} reports -type d -exec ${INSTALL_DATA_DIR} ${DESTDIR}${EGDIR}/'{}' \;
-	cd ${WRKSRC}/etc && ${FIND} reports -type f ! -name "*.orig" -exec ${INSTALL_DATA} '{}' ${DESTDIR}${EGDIR}/'{}' \;
-
-	${INSTALL_LIB_DIR} ${DESTDIR}${LIBDIR}
-	${INSTALL_LIB_DIR} ${DESTDIR}${LIBDIR}/MailScanner
-	${INSTALL_SCRIPT} ${WRKSRC}/lib/MailScanner.pm ${DESTDIR}${LIBDIR}
-	cd ${WRKSRC}/lib/MailScanner && ${FIND} . -name "*.pm" -exec ${INSTALL_DATA} '{}' ${DESTDIR}${LIBDIR}/MailScanner \;
-	cd ${WRKSRC}/lib/MailScanner && ${FIND} . -name "*.pl" -exec ${INSTALL_DATA} '{}' ${DESTDIR}${LIBDIR}/MailScanner \;
-
-	${INSTALL_DATA_DIR} ${DESTDIR}${DOCSDIR}
-	cd ${WRKSRC}/docs && ${FIND} * -type d -exec ${INSTALL_DATA_DIR} ${DESTDIR}${DOCSDIR}'/{}' \;
-	cd ${WRKSRC}/docs && ${FIND} * -type f -exec ${INSTALL_DATA} '{}' ${DESTDIR}${DOCSDIR} \;
-	cd ${WRKSRC}/docs/man && ${INSTALL_MAN} MailScanner.conf.5 ${DESTDIR}${PREFIX}/${PKGMANDIR}/man5
-	cd ${WRKSRC}/docs/man && ${INSTALL_MAN} MailScanner.8 ${DESTDIR}${PREFIX}/${PKGMANDIR}/man8
-
-post-install:
-	${CP} -f ${PKGDIR}/PLIST ${PLIST_SRC}
-	${ECHO} bin/MailScanner >> ${PLIST_SRC}
-	${ECHO} man/man5/MailScanner.conf.5 >> ${PLIST_SRC}
-	${ECHO} man/man8/MailScanner.8 >> ${PLIST_SRC}
-.for _dir_ in ${DOCSDIR} ${EGDIR} ${LIBDIR} ${LIBEXECDIR}
-	${FIND} ${DESTDIR}${_dir_} \( -type f -o -type l \) -print \
-		| ${SORT} | ${SED} -e "s,${DESTDIR}${PREFIX}/,,g" \
-		>> ${PLIST_SRC}
-.endfor
-
-.include "../../mk/bsd.pkg.mk"
diff --git a/mail/mailscanner/PLIST b/mail/mailscanner/PLIST
deleted file mode 100644
index e7070f1ddbd..00000000000
--- a/mail/mailscanner/PLIST
+++ /dev/null
@@ -1,3 +0,0 @@
-@comment $NetBSD: PLIST,v 1.2 2005/05/02 20:34:00 reed Exp $
-@comment this PLIST automatically generated
-share/examples/rc.d/mailscanner
diff --git a/mail/mailscanner/distinfo b/mail/mailscanner/distinfo
deleted file mode 100644
index 3798bb87b2e..00000000000
--- a/mail/mailscanner/distinfo
+++ /dev/null
@@ -1,5 +0,0 @@
-$NetBSD: distinfo,v 1.2 2005/02/24 09:59:24 agc Exp $
-
-SHA1 (MailScanner-4.30.3-2.tar.gz) = ef9503dc57ec6d6f97a7333fce2b3e283d972498
-RMD160 (MailScanner-4.30.3-2.tar.gz) = f6dbe8acb329068e342d2cbfb16f3309d4db1a7a
-Size (MailScanner-4.30.3-2.tar.gz) = 996850 bytes
diff --git a/mail/mailscanner/files/mailscanner.sh b/mail/mailscanner/files/mailscanner.sh
deleted file mode 100644
index 044f5730ef1..00000000000
--- a/mail/mailscanner/files/mailscanner.sh
+++ /dev/null
@@ -1,17 +0,0 @@
-#!@RCD_SCRIPTS_SHELL@
-#
-#	$NetBSD: mailscanner.sh,v 1.1.1.1 2004/09/25 00:33:19 grant Exp $
-#
-# PROVIDE: mailscanner
-# REQUIRE: LOGIN
-
-. /etc/rc.subr
-
-name="MailScanner"
-rcvar="mailscanner"
-start_cmd="@PREFIX@/bin/${name}"
-pidfile="/var/run/${name}.pid"
-required_files="@PKG_SYSCONFDIR@/${name}.conf"
-
-load_rc_config $name
-run_rc_command "$1"