Now that bsd.pkg.defaults.mk is in the tree, mk.conf.example can go away.

1 files changed, 0 insertions, 1162 deletions

diff --git a/mk/mk.conf.example b/mk/mk.conf.example
deleted file mode 100644
index 13656067b65..00000000000
--- a/mk/mk.conf.example
+++ /dev/null
@@ -1,1162 +0,0 @@
-# $NetBSD: mk.conf.example,v 1.242 2001/09/13 22:53:20 jlam Exp $
-#
-
-# Sample /etc/mk.conf file, which can be used to set specific values
-# for building either NetBSD or some of the NetBSD packages collection.
-# See the NetBSD mk.conf(5) and packages(7) manual page for a full
-# description of all available options.
-#
-
-# ************************************************************************
-# NOTE TO PEOPLE EDITING THIS FILE - USE LEADING SPACES, NOT LEADING TABS.
-# ************************************************************************
-
-# Deal with namespace issues. BSD_PKG_MK is always defined when "make"
-# is invoked in pkgsrc, but never in src or xsrc. Don't forget to add the
-# ".endif" at the bottom.
-.ifndef BSD_PKG_MK
-#	Non-package stuff
-.else
-#	Begin package stuff
-
-#
-#	Firstly, definitions for NetBSD and package collection
-#
-
-#MANZ=
-# gzip manual pages at installation time
-# Possible: defined, not defined
-# Default: not defined
-
-#MKCRYPTO= no
-# If not YES or yes, don't fetch, build or install crypto packages.
-# Possible: not defined, no
-# Default: yes
-
-#OBJMACHINE=
-# use machine-specific object directories, e.g.  work.i386, work.sparc
-# Possible: defined, not defined
-# Default: not defined
-
-#USETBL=
-# Run raw manual pages through tbl(1) before piping through troff(1)
-# when formatting manual pages.
-# Possible: defined, not defined
-# Default: not defined
-
-
-#
-# The following values are used to manage the packages collection as a whole.
-#
-
-#PKG_DEVELOPER=	yes
-# Run a sanity check that package developers want:
-#  * run check-shlibs to see that all binaries will find their libs
-# Possible: defined, not defined
-# Default: not defined
-
-#WRKOBJDIR=	/usr/tmp
-# build here instead of in pkgsrc
-# Possible: any path
-# Default: not defined
-
-#LOCALBASE=	/usr/local
-# Where non-X-based packages will be installed
-# Possible: any path
-# Default: /usr/pkg
-
-#CROSSBASE=	/usr/pkg/cross
-# Where "cross" category packages install
-# Possible: any path
-# Default: ${LOCALBASE}/cross
-
-#X11BASE=	/usr/X11R6
-# Where X11 is installed on the system.
-# (and the default install path of X11 pkgs)
-# Possible: any path
-# Default: /usr/X11R6
-
-#MOTIFBASE=	/usr/X11R6
-# Where Motif-2.0-compatible headers and libraries are installed on
-# the system.
-# Possible: any path
-# Default: ${X11PREFIX}, where OpenMotif or LessTif is installed
-
-#MOTIF12BASE=	/usr/X11R6
-# Where Motif-1.2-compatible headers and libraries are installed on
-# the system.
-# Possible: any path
-# Default: ${X11PREFIX}, where LessTif-1.2 is installed
-
-#DISTDIR=	${PKGSRCDIR}/distfiles
-# Directory where original distribution
-# files are stored.
-# Possible: any path you like
-# Default: /usr/pkgsrc/distfiles
-
-#DIST_PATH=	/cdrom/0/distfiles:${HOME}/distfiles
-# colon-delimited list of directories in which to search for
-# ${DISTFILES} and ${PATCHFILES}.  If the requested file is not in any
-# of the directories in ${DIST_PATH}, it will be downloaded into
-# ${DISTDIR}.  If the requested file is in one of the directories in
-# ${DIST_PATH}, a symbolic link will be made to it from ${DISTDIR}. 
-# ${DIST_PATH} directories will will be searched before ${DISTDIR},
-# letting a CD hold the main distfiles archive, and local ${DISTDIR}
-# hold any updated distfiles, for example.
-# Possible:  any directories
-# Default: none
-
-#PACKAGES=       ${PKGSRCDIR}/packages/${MACHINE_ARCH}
-# Store generated packages on a per-architecture base
-# Possible: any path you like
-# Default: /usr/pkgsrc/packages
-
-#PASSIVE_FETCH=
-# Use ftp(1) in passive mode, for use behind filtering firewalls. 
-# (Set by default in ftp(1) in NetBSD-current)
-# Possible: defined, not defined
-# Default: not defined
-
-#PATCH_FUZZ_FACTOR?=
-# Fuzz factor to use when applying patches.  Will only be applied when
-# using a patch(1) that understands -F.  This should be a "?="
-# setting, since package Makefiles may set this value, before
-# /etc/mk.conf is read.
-# Possible: "-Fn" where n is a number, none
-# Default: "-F0"
-
-#ACCEPTABLE_LICENSES=	fee-based-commercial-use no-commercial-use \
-# 			no-profit limited-redistribution shareware
-# Whitespace-delimited list of the types of license which are
-# acceptable for installation.  (apart from standard "free" licenses
-# such as Berkeley/CMU and GPL).  Possible values are presented below.
-#
-# Default: none
-
-#ACCEPTABLE_LICENSES+=	adobe-acrobat-license
-# Enable it if you accept the usage policy for Adobe Acrobat
-# and would like to build it.  see pkgsrc/print/acroread.
-#ACCEPTABLE_LICENSES+=	citrix_ica-license
-# Enable it if you accept the license proposed at
-# http://www.citrix.com/download/unix-downloads.htm
-# when you try to download the corresponding client to download and build
-# the package.
-#ACCEPTABLE_LICENSES+=	csound-license
-# Enable it if you accept the redistribution/use license for csound and would
-# like to build csound.  see pkgsrc/licenses/csound-license
-#ACCEPTABLE_LICENSES+=	fee-based-commercial-use
-# Enable it if you are okay to build/use third-party software, which require
-# fees for commercial use (i.e. you are willing to pay, or you are
-# non-commercial).
-#ACCEPTABLE_LICENSES+=	kermit-license
-# Enable it if you accept the redistribution license for ckermit and would
-# like to build ckermit.  see pkgsrc/licenses/kermit-license
-#ACCEPTABLE_LICENSES+=	limited-redistribution
-# Enable it if you are okay to build/use third-party software, which has
-# restriction on redistribution (i.e. you will obey the restriction on
-# redistribution it imposes).
-#ACCEPTABLE_LICENSES+=	maude-license
-# Enable it if you filled out and returned the license found at
-# http://maude.csl.sri.com/license/license.html
-# and want to build maude.
-#ACCEPTABLE_LICENSES+=	no-commercial-use
-# Enable it if you are okay to build/use third-party software, which is not
-# for commercial use (i.e. you are non-commerical)
-#ACCEPTABLE_LICENSES+=	no-profit
-# Enable it if you are okay to build/use third-party software, which is not
-# for for-profit use (i.e. you will use the software for non-profit purpose)
-#ACCEPTABLE_LICENSES+=	opera-license
-# Enable it if you accept the redistribution license for opera and would
-# like to build opera.  see pkgsrc/licenses/opera-license
-#ACCEPTABLE_LICENSES+=	palmos-sdk-license
-# Enable if you agree with the license for using the PalmOS SDK.
-# Used by pkgsrc/devel/palmos-includes. For the license, see
-# pkgsrc/licenses/palmos-sdk-license.
-#ACCEPTABLE_LICENSES+=	shareware
-# Enable it if you are okay to build/use shareware.
-#ACCEPTABLE_LICENSES+=	sun-jsdk20-license
-# Enable it if you accept the download license for Sun JSDK and would
-# like to build Sun JSDK.  see pkgsrc/lang/jdk.
-#ACCEPTABLE_LICENSES+= jdk13-license
-# Enable it if you accept the download license for Sun JDK1.3 and would
-# like to build Sun JDK13.  see pkgsrc/langun-jre13.
-#ACCEPTABLE_LICENSES+=	sun-swing-license
-# Enable it if you accept the download license for Sun's Swing (JFC) toolkit
-# and would like to build JFC.  see pkgsrc/x11/swing.
-#ACCEPTABLE_LICENSES+=	unarj-license
-# Enable it if you accept the license terms for the unarj archiver
-# and would like to build unarj.  see pkgsrc/archivers/unarj.
-#ACCEPTABLE_LICENSES+=	unrar-license
-# Enable it if you accept the license terms for the unrar archiver
-# and would like to build unrar.  see pkgsrc/archivers/unrar.
-#ACCEPTABLE_LICENSES+=	zoo-license
-# Enable it if you accept the license terms for the zoo archiver
-# and would like to build zoo.  see pkgsrc/archivers/zoo.
-#ACCEPTABLE_LICENSES+=	emiclock-license
-# Enable it if you accept the license terms for emiclock
-# and would like to build it.  see pkgsrc/time/emiclock.
-#ACCEPTABLE_LICENSES+=	nntpclnt-license
-# Enable it if you accept the license terms for nntpclnt
-# and would like to build nntpclnt.  see pkgsrc/news/nntpclnt.
-#ACCEPTABLE_LICENSES+=	trn-license
-# Enable it if you accept the license terms for trn
-# and would like to build trn.  see pkgsrc/news/trn.
-#ACCEPTABLE_LICENSES+=	cyrus-imapd-license
-# Enable it if you accept the license terms for cyrus-imapd
-# and would like to build cyrus-imapd.  see pkgsrc/mail/cyrus-imapd.
-#ACCEPTABLE_LICENSES+=	majordomo-license
-# Enable it if you accept the license terms for majordomo
-# and would like to build majordomo.  see pkgsrc/mail/majordomo.
-#ACCEPTABLE_LICENSES+=	mush-license
-# Enable it if you accept the license terms for mush
-# and would like to build mush.  see pkgsrc/mail/mush.
-#ACCEPTABLE_LICENSES+=	pine-license
-# Enable it if you accept the license terms for pine
-# and would like to build pine.  see pkgsrc/mail/pine.
-#ACCEPTABLE_LICENSES+=	mosaic-license
-# Enable it if you accept the license terms for mosaic
-# and would like to build mosaic.  see pkgsrc/www/Mosaic.
-#ACCEPTABLE_LICENSES+=	portsentry-license
-# Enable it if you accept the license terms for portsentry
-# and would like to build portsentry.  see pkgsrc/security/portsentry.
-#ACCEPTABLE_LICENSES+=	srp_client-license
-# Enable it if you accept the license terms for srp_client
-# and would like to build srp_client.  see pkgsrc/security/srp_client.
-#ACCEPTABLE_LICENSES+=	jdk-license
-# Enable it if you accept the license terms for jdk
-# and would like to build jdk.  see pkgsrc/lang/jdk.
-#ACCEPTABLE_LICENSES+=	IDEA-licence
-# Enable it if you accept the license terms for libidea
-# and would like to build libidea.  see pkgsrc/security/libidea.
-#ACCEPTABLE_LICENSES+=	amiwm-license
-# Enable it if you accept the license terms for amiwm
-# and would like to build amiwm.  see pkgsrc/wm/amiwm.
-#ACCEPTABLE_LICENSES+=	astrolog-license
-# Enable it if you accept the license terms for astrolog
-# and would like to build astrolog.  see pkgsrc/misc/astrolog.
-
-#SPECIFIC_PKGS=
-# Don't use the default of all packages (from the top-level of the
-# pkgsrc tree), and use the values of the definitions
-# SITE_SPECIFIC_PKGS, HOST_SPECIFIC_PKGS, GROUP_SPECIFIC_PKGS, and
-# USER_SPECIFIC_PKGS.
-# Possible: defined, not defined
-# Default: not defined
-
-#SITE_SPECIFIC_PKGS=
-# List of packages that are wanted for each host on the site.  Each
-# package in the list is of the form <category>/<package>.
-# Possible: any combination of packages
-# Default: not set
-
-#HOST_SPECIFIC_PKGS=
-# List of packages that are wanted for this particular host/machine. 
-# Each package in the list is of the form <category>/<package>.
-# Possible: any combination of packages
-# Default: not set
-
-#GROUP_SPECIFIC_PKGS=
-# List of packages that are wanted for this group of users.  Each
-# package in the list is of the form <category>/<package>.
-# Possible: any combination of packages
-# Default: not set
-
-#USER_SPECIFIC_PKGS=
-# List of packages that are wanted for this particular user.  Each
-# package in the list is of the form <category>/<package>.
-# Possible: any combination of packages
-# Default: not set
-
-#EXTRACT_USING_PAX=
-# Use pax(1) to extract archives, rather than GNU tar.
-# Possible: defined, not defined
-# Default: not defined
-
-#FAILOVER_FETCH=
-# Perform a checksum at "make fetch" time.  If the checksum doesn't
-# match the stored value, try to retrieve the file from the next site
-# in the list
-# Possible:  defined, not defined
-# Default: not defined
-
-#MASTER_SORT=        .ac.at .at .de .ch .se .fi .no
-# Whitespace delimited list of preferred download locations. 
-# MASTER_SITES will be reordered according to the hosts' address last
-# components.
-# Possible: list of domain name suffixes
-# Default: none
-
-#MASTER_SORT_REGEX=  ftp://.*/ 
-# Same as MASTER_SORT, but takes a regular expression for more
-# flexibility in matching.  Regexps defined here have higher priority
-# than MASTER_SORT.  This example would prefer ftp transfers over
-# anything else.
-# Possible: Regexps as in awk(1)
-# Default: none
-
-#PATCH_DEBUG=
-# Used to debug patches as they are applied
-# Possible: defined, not defined
-# Default: not defined
-
-#PKG_FC=
-# The Fortran compiler used to compile Fortran code contained in
-# packages.
-# Possible: any Fortran compiler
-# Default: none
-
-#PRE_ROOT_CMD=${CHMOD} -R o+w ${WRKDIR}
-# Command to be run by normal user, just before becoming root (see
-# SU_CMD) to install the package.  For example, the command shown
-# would allow root to write and modify files below ${WRKDIR}, if on an
-# NFS -noroot file system.
-# Possible: any shell commands
-# Default: none
-
-#SU_CMD=${SU} - root -c
-# Command to perform before "make install", if the user does not have
-# an effective uid of 0.  A possible substitute is "sudo -u root"
-# Possible: su, sudo, or priv, with appropriate arguments
-# Default: ${SU} - root -c
-
-#FATAL_OBJECT_FMT_SKEW=yes
-# If there is a pre-requisite package, which has a different object format
-# from that currently being used, halt execution. One (rare) situation where
-# it is possible for the difference to be harmless is where the pre-requisite
-# package provides an executable, not a library.
-# Possible: yes, no
-# Default: yes
-
-#WARN_NO_OBJECT_FMT=yes
-# Packages installed on a machine before OBJECT_FMT was added to the
-# BUILD_DEFS definitions (on 29th September 1999) cannot say which 
-# object format they are in.  This will cause a warning to be displayed. 
-# Set this to "no" to stop the warning message being shown.
-# Possible: yes, no
-# Default: yes 
-
-#SMART_MESSAGES=yes
-# Display the make(1) target, and the current stack of packages being built,
-# when displaying messages during package builds.
-# Possible: defined, not defined
-# Default: not defined
-
-#BINPKG_SITE=...
-# Whitespace seperated list of URLs for binary packages. Directories
-# "All" etc. are expected in the named place, variables "rel" and
-# "arch" are replaced with OS release ("1.5", ...) and architecture
-# ("mipsel", ...)
-# Possible: any ftp url, see above.
-# Default: ftp://ftp.netbsd.org/pub/NetBSD/packages/$${rel}/$${arch}
-
-#BIN_INSTALL_FLAGS=
-# List of flags passed to pkg_add(8) in the bin_install package.
-# Possible: -v, -u, etc. See pkg_add(8)
-# Default: (no option)
-
-#LOCALPATCHES=...
-# Directory where local patches are stored. See pkgsrc/Packages.txt.
-# Possible: Any local directory
-# Default: none
-
-#
-#	Definitions used only in the packages collection
-#
-
-#AMANDA_SMB=
-# Used in the amanda-client package to enable backup with smbclient
-# Possible: defined, not defined
-# Default: not defined
-
-#AMANDA_USER=	backup
-# Used in the amanda packages to specify the login user and group
-# responsible for backups
-# Possible: any user name
-# Default: backup
-
-#AMANDA_VAR=	/var/amanda
-# Specifies the directory in which amanda puts its logs and status
-# files. 
-# Default: /var/amanda
-
-#APACHE_CUSTOM_CFLAGS=
-# Extra CFLAGS to be passed to the compiler during the Apache build.
-# Possible: any legal compiler flags, e.g. -O6 -DHARD_SERVER_LIMIT=512
-# Default: not defined
-
-#APACHE_PERF_TUNING=	YES
-# Optimize for maximum Apache performance.
-# Possible: not defined, YES
-# Default: not defined
-
-#APACHE_SUEXEC=	YES
-# Enable support Switch User For Exec.  See
-# http://www.apache.org/docs/suexec.html for more informations.
-# Possible: not defined, YES
-# Default: not defined
-
-#APACHE_SUEXEC_DOCROOT=	${LOCALBASE}/share/httpd/htdocs                
-# Specifies the document space in which suexec will be allowed to work.      
-# Possible: Any valid directory                                              
-# Default: ${LOCALBASE}/share/httpd/htdocs                                   
-
-#APACHE_SYSCONFDIR=	/etc/httpd
-# Specifies the location for Apache configuration files.
-# If your ${LOCALBASE} is shared between machines use /etc/httpd
-# or a similar directory that is local to each machine.
-# Possible: Any valid directory
-# Default: ${LOCALBASE}/etc/httpd
-
-#APACHE_USER=	www
-# Used in the apache package to specify the user allowed to execute
-# the `suexec' wrapper.
-# Possible: any user name
-# Default: www
-
-#ARLA_CACHE=	/var/cache
-# Specifies the location of the cache used by arla. Should be on a local disk.
-# Default: ${LOCALBASE}/cache
-
-#AVIFILE_USE_QT=	YES
-# Enable support for qt2 in avifile-devel package. These utilities will be built
-# in addition to non-qt version: avi{bench,cat,make,recompress,type}.
-# aviplay (qt-based player that uses avifile libraries) will be built too,
-# but it has problems with threads and does not work yet.
-# Default: not defined
-
-#BASH_STATIC=	YES
-# Used in bash2 package to link it statically (for use as a root shell)
-# Possible: not defined, YES
-# Default: not defined
-
-#BATTLEBALL_USE_MESA=
-# Used in battleball to build in support for OpenGL/Mesa. Will use
-# Mesa-glx (rather than Mesa) if Mesa-glx is already installed.
-# Possible: not defined, YES
-# Default: not defined
-
-#BOOTSTRAP_EGCS=
-# Used in egcs-current package to set bootstrap compile (two-stage)
-# mode.
-# Possible: defined, not defined
-# Default: not defined
-
-#BULK_PREREQ=
-# Used during bulk package builds.  Packages listed in this variable are
-# assumed to be required to build all packages.  Only a very limited number
-# of packages belong in this variable.  An example of an appropriate package
-# is pkgtools/xpkgwedge.  Currently pkgtools/digest is always added to this
-# list.
-# Possible: category/pkg
-# Default: not defined
-
-#CCLIENT_MBOX_FMT=	mbx
-# Used in imap-uw to set the default format used by c-client programs for new
-# mailbox creation.  Check the UW IMAP documentation for more details
-# regarding the pros and cons of the various mailbox formats.
-#
-# Possible: mbox, mbx, mh, mmdf, mtx, mx, news, phile, tenex, unix
-# Default: unix
-
-#CUPS_GROUP=	sys
-# Used in the cups package to specify the group to run CUPS commands as.
-# Possible: any group name
-# Default: sys
-
-#CUPS_USER=	lp
-# Used in the cups package to specify the user to run CUPS commands as
-# and to create temporary files in the /var/spool/cups/tmp directory.
-# Possible: any user name
-# Default: lp
-
-#CYRUS_GROUP=	mail
-# Used in the cyrus-imapd package to specify the group used for
-# installing setuid programs.
-# Possible: any group name
-# Default: mail
-
-#CYRUS_USER=	cyrus
-# Used in the cyrus-imapd package to specify the userid used for
-# installing setuid programs.
-# Possible: any user name
-# Default: backup
-
-#DEFAULT_IRC_SERVER=
-# Used in ircII to set the default irc server. 
-# Possible: see the list at
-# http://www.irchelp.org/irchelp/networks/servers/efnet.html
-# Default: not defined
-
-#DEFAULT_SERIAL_DEVICE=
-# Used to provide a default setting for the serial device for
-# various packages which communicate over the serial port.
-# Possible:  /dev/your_favorite_serial_device
-# Default: defaults for various machine_archs are set in mk/bsd.prefs.mk
-
-#DELIVER_SUID=	NO
-# Used to decide if deliver should be installed suid root.
-# Possible: YES, NO
-# Default: NO
-
-#DT_LAYOUT=
-# Used by dt package to specify the keyboard layout.
-# Possible: US, FI, FR, GER, DV
-# Default: FI
-
-#EMACS_USE_POP
-# Used by emacs package to determine whether pop support is enabled or not.
-# Possible: yes, no
-# Default: yes
-
-#EMACS_USE_X
-# Used by emacs package to determine whether X support is enabled or not.
-# If defined, the value is directly passed as argument of --with-x.
-# If not defined, the configure script will configure automatically.
-# Possible: yes, no, not defined
-# Default: not defined
-
-#EMACS_USE_X_TOOLKIT
-# Used by emacs package to determine what kind of toolkit support is enabled.
-# If defined, the value is directly passed as argument of --with-x-toolkit.
-# If not defined or defined to yes, the configure script will pick up an
-# appropriate one.  E.g, if X11R5 or later is found, lucid will be used.
-# Possible: yes, no, not defined, athena, lucid, motif
-# Default: not defined
-
-#FETCHMAIL_USE_SSL=	YES
-# Enable SSL in fetchmail (for pop and imap connections)
-# Possible: YES, NO
-# Default: YES
-
-#FOX_USE_XUNICODE=	YES
-# Used in fox to build in support for Unicode by XUnicode. See
-# http://www.ab.wakwak.com/~tino/jatk/fox/ (in japanese) for more information.
-# Possible: YES, NO
-# Default: YES
-
-#INN_DATA_DIR=
-# Used by inn to specify the data directory.
-# Possible: any path you like
-# Default: /var/news
-
-#IRRD_USE_PGP=
-# Used by irrd package to specify the version of PGP to use, if any.
-# Possible: 5, 2, not defined
-# Default: not defined
-# [XXX: configure will locate pgpv or pgp]
-
-#JB_FQHOSTNAME=
-# Used by jitterbug package to include the fully-qualified domain name
-# of the host.
-# Possible: defined, not defined
-# default: not defined
-
-#JB_GROUP=jitter
-# Used by jitterbug package for groupname
-# Possible: any valid groupname
-# Default: jitter
-
-#JB_GROUPID=509
-# Used by jitterbug package for gid of JB_USER.
-# Possible: any valid gid
-# Default: 509
-
-#JB_LOCALMAIL=
-# Used by jitterbug package as the mail alias to receive mail from
-# jitterbug
-# Possible: any valid mail alias
-# Default: none
-
-#JB_PACKAGE= test
-# Used by jitterbug to determine the type of package to be installed.
-# Possible: test, production
-# Default: test
-
-#JB_USER=jitter
-# Used by jitterbug package for username
-# Possible: any valid username
-# Default: jitter
-
-#JB_USERID=509
-# Used by jitterbug package for uid of JB_USER.
-# Possible: any valid uid
-# Default: 509
-
-#JAKARTA_HOME=
-# Used by the www/jakarta-tomcat package to choose an install location
-# Possible: any directory
-# Default: ${JAVA_HOME}/jakarta
-
-#JAVA_HOME=
-# Location for packages which install java code
-# Possible: any directory
-# Default: home of JVM chosen by ${PKG_JVM}
-
-#JDK_HOME=
-# Used by the lang/JDK package to choose an install location
-# Possible: any directory, e.g. /usr/jdk
-# Default: ${LOCALBASE}/java
-
-#JSDK_HOME=
-# Location for Java Servlet Development Kit installed by www/jsdk20
-# Possible: any directory
-# Default: ${JAVA_HOME}/jsdk
-
-#KERBEROS=
-# Used in many packages to specify use of a Kerberos (or compatible)
-# subsystem.  Requires Kerberos libraries in /usr/lib.
-# Possible: defined, not defined
-# Default: not defined
-
-#KERMIT_SUID_UUCP
-# If set to YES or yes, install kermit binary set-uid uucp. Permits an 
-# unprivileged user to access the serial ports, with default permissions
-# on the /dev/tty0* special files.
-# Possible: YES, yes, not defined
-# Default: not defined
-
-#KJS_USE_PCRE=
-# Used in kdelibs2 to determine if kjs (javascript) should use Perl
-# Compatible Regular Expressions (pcre)
-# Possible: yes, not defined
-# Default: not defined
-
-#KNEWS_DOMAIN_FILE=
-# Used in the knews package to set the domain name from the contents
-# of this file.
-# Possible: any valid path
-# Default: none
-
-#KNEWS_DOMAIN_NAME=
-# Used in the knews package to set the domain name.
-# Possible:  almost anything really, usually a FQDN.
-# Default: none
-
-#KTERM_USE_WALLPAPER=
-# Used in kterm package to support wallpaper
-# Possible: not defined, YES
-# Default: not defined
-
-#LAME_USE_GTK=
-# Used in lame package to compile in the graphical analyzer (which uses
-# GTK).
-# Possible: not defined, defined
-# Default: not defined
-
-#LIBWRAP_FWD=
-# Used in ssh package to make libwrap also compare against forwarded
-# connection attempts
-# Possible: not defined, YES
-# Default: not defined
-
-#LINUX_LOCALES=
-# Used in linux-locale package to install specify language(s)
-# Possible: af ar bg br ca cs cy da de el en eo es et eu fi fo fr ga gl \
-#	    he hr hu hy id is it ja ka kl ko lo lt lv nl no oc pl pt ro \
-#	    ru sk sl sr sv th tr uk vi wa zh
-# Default: all languages
-
-#LPRNG_PRIV_PORTS=	NO
-# Used by LPRng to require connections to be from privileged ports.
-# Possible: YES, or NO.
-# Default: NO
-
-#LPRNG_SUID=		YES
-# Used by LPRng to enable setuid installation of LPRng binaries.
-# Possible: YES, or NO.
-# Default: YES 
-
-#LSOF_MORE_SECURE=	0
-# Used in lsof to specify that non-root users can only view their own files
-# Possible:	0 (allow non-root users to view all open files), or
-#		1 (only allow root to view all open files)
-# Default: 0
-
-#LYNX_SCREEN_LIB=	slang
-# Used in lynx and lynx-current to set which screen library to use.
-# Possible: slang, ncurses, curses.
-# Default: slang
-
-#M68060=
-# Used mostly by packages (e.g.:  pgp2, ssh) with have fast
-# 68020/030/040 assembler routines for multiprecision arithmetic,
-# which use the 32/64bit mul/div instruction.  These instructions are
-# software emulated on the 68060, thus very slow.  Set to YES when
-# compiling for the 68060 cpu.
-# Possible: not defined, YES.
-# Default: not defined.
-
-#MAJORDOMO_GROUP=
-# Used by the majordomo package as the groupid majordomo runs at.
-# Possible: any
-# Default: majordom
-
-#MAJORDOMO_TMPDIR=
-# Used by the majordomo package as the directory to store temp files.
-# Possible: any directory.
-# Default: /var/tmp
-
-#MAJORDOMO_USER=
-# Used by majordomo package as the userid majordomo runs at.
-# Possible: any
-# Default: majordom
-
-#MOTIF_TYPE=lesstif
-# Used by motif.buildlink.mk to choose which Motif-2.0-compatible
-# installation to use.  This value is ignored if MOTIFBASE is explicitly
-# set.
-# Possible: openmotif, lesstif, dt (for Solaris only)
-# Default: openmotif
-
-#MOTIF12_TYPE=lesstif12
-# Used by motif.buildlink.mk to choose which Motif-1.2-compatible
-# installation to use.  This value is ignored if MOTIF12BASE is explicitly
-# set.
-# Possible: lesstif12, dt (for Solaris only)
-# Default: lesstif12
-
-#MTOOLS_ENABLE_FLOPPYD=
-# Used by the mtools package to determine whether or not the floppyd
-# program is installed. X11 libraries and header files are needed to
-# build floppyd and run floppyd.
-# Possible: defined, not defined
-# Default: not defined
-
-#MUTT_USE_SSL=	YES
-# Enable SSL in mutt (for pop and imap connections)
-# Possible: YES, NO
-# Default: YES
-
-#NMH_EDITOR=
-# default editor for use in nmh.
-# Possible: any editor.
-# Default: vi
-
-#NMH_MTA=	smtp
-# default MTA for use in nmh.
-# Possible: smtp or sendmail.
-# Default: smtp
-
-#NMH_PAGER=
-# default pager for use in nmh.
-# Possible: any editor.
-# Default: more
-
-#NS_ENCRYPTION=	us
-# Used to decide if export or US version of Netscape should be
-# installed.
-# Possible: export, us
-# Default: export
-
-#NS_PREFERRED=
-# Used by netscape to determine preferred browser to open
-# Possible: not defined, communicator, navigator, mozilla
-# Default: not defined, which implies communicator
-
-#NS_NO_FLASH=
-# Used by navigator/communicator package to decide if flash should be
-# installed or not. By default, flash is installed.
-# Possible: not defined, defined
-# Default: not defined
-
-#NS_USE_BSDI=	YES
-# Used to decide if i386 BSDi Netscape binary should be used in preference 
-# to linux version.
-# Possible: not defined, YES
-# Default: not defined
-
-#PALMOS_DEFAULT_SDK=	3.5
-# Version of PalmOS SDK to use as default.
-# Possible: 1, 2, 3.1, 3.5
-# Default: 3.5
-
-PAPERSIZE=	A4
-# Default paper size for packages.
-# Possible: A4, Letter, Letterdj.
-# Default: none
-
-#PGGROUP=	pgsql
-# Used in postgresql package as the groupname of the database
-# administrator
-# Possible: any group name
-# Default: pgsql
-
-#PGUSER=	pgsql
-# Used in postgresql package as the username of the database admin
-# Possible: any user name
-# Default: pgsql
-
-#PGHOME=	/data/${PGUSER}
-# Used in postgresql package as the home directory for the database
-# administrator
-# Possible: any valid location
-# Default: ${PREFIX}/${PGUSER}
-
-#PG_MB_ENCODING=	SQL_ASCII
-# Used to postgresql package to define the language encoding of the
-# backend server process.
-# Possible: SQL_ASCII, EUC_JP, EUC_CN, EUC_KR, EUC_TW, UNICODE, MULE_INTERNAL,
-#	LATIN1, LATIN2, LATIN3, LATIN4, LATIN5, KOI8, WIN, ALT
-# Default: undefined
-
-#PHP_CONFDIR=	/etc
-# Specifies the location for PHP configuration files.
-# If your ${LOCALBASE} is shared between machines use /etc or a similar
-# directory that is local to each machine.
-# Possible: Any valid directory
-# Default: ${LOCALBASE}/etc
-
-#PILRC_USE_GTK=	YES
-# Use gtk+ in pilrc, needed for the UI previewer.
-# Possible: YES, NO
-# Default: YES
-
-#PINE_USE_LDAP=
-# Compile code into pine to use a LDAP server for an address book. 
-# Possible: undefined, YES
-# Default: undefined (support not compiled in)
-
-#PINFO_USE_NATIVE_CURSES=
-# Used in pinfo to use NetBSD native curses, rather than ncurses.
-# Only works on NetBSD-1.5 and newer.
-# Possible: YES, not defined
-# Default: not defined
-
-#PKG_JVM=
-# Used to choose a java virtual machine for packages which use Java.
-# Possible: jdk, sun-jdk, kaffe (kaffe currently has some problems)
-# Default: jdk on NetBSD/i386, kaffe elsewhere
-
-#POPTOP_USE_MPPE=
-# Used in poptop package to specify the use of the mppe-ppp package
-# in preference to the standard ppp
-# Possible: defined, not defined
-# Default: not defined
-
-#POSTFIX_PCRE=YES
-# Add support for Perl Compatible Regular Expressions.
-# Possible: YES, not defined
-# Default: not defined
-
-#POSTFIX_VERP=YES
-# Add support for Variable Envelope Return Paths.
-# Possible: YES, not defined
-# Default: not defined
-
-#PRIV_CONF_DIR=${LOCALBASE}/etc
-# Specify the parent of the directory for pkgsrc/security/priv
-# package's configuration data.
-# Possible: Any valid directory
-# Default: ${LOCALBASE}/etc
-
-#PROCMAIL_MAILSPOOLHOME=.MailBox
-# To default user mailboxes to their home directory,
-# specify the name of the mailbox file.
-# Possible: Any valid filename, not defined
-# Default: not defined
-
-#PROCMAIL_TRUSTED_IDS=0
-# To allow all users to use the "-f" switch set this to 0.
-# Possible: A list of users, terminated by a zero.
-# Default: see Makefile
-
-#PVM_SSH=
-# Specify the rsh/ssh program used by pvm to communicate between
-# systems.
-# Possible:  Any rsh/ssh program.
-# Default:   /usr/bin/ssh if it exists, otherwise ${LOCALBASE}/bin/ssh
-
-#QPOPPER_FAC=
-# Used by qpopper package as the default syslog facility.
-# Possible: syslog(3)'s facility string without preceding "LOG_".
-# Default: LOCAL1
-
-#QPOPPER_USER=
-# Used by qpopper package as the owner of apop database and qpopauth
-# command runs at.
-# Possible: any
-# Default: pop
-
-#QPOPPER_SERVERMODE=
-# Used in qpopper package to enable server mode.
-# Possible: defined, not defined
-# Default: not defined
-
-#RASMOL_DEPTH=
-# Used in rasmol package to choose display depth to compile the package
-# for, since it only supports one at a time.
-# Possible: 8, 16, 32
-# Default: 8
-
-#SAMBA_WITH_CUPS=
-# Used in the samba package to compile in native support for the UNIX IPP
-# implementation, CUPS.
-# Possible: defined, not defined
-# Default: not defined
-
-#SDL_USE_NAS=
-# Used in SDL package to enable use of the network audio system
-# Possible: defined, not defined
-# Default: not defined
-
-#SDIST_PAWD= pawd
-# If you are using amd you'll want to use pawd instead of pwd to derive
-# the current working directory.
-# Possible: pawd, pwd
-# Default: pwd
-
-#SERIAL_DEVICES=
-# Used to provide a default setting for all the serial devices for
-# various packages which communicate over the serial port.
-# Possible:  /dev/your_favorite_serial_device0 /dev/your_favorite_serial_device1 ...
-# Default: defaults for various machine_archs are set in mk/bsd.prefs.mk
-
-#SPARC_TARGET_ARCH=
-# Select SPARC target architecture under Solaris.
-# Possible: sparcv7, sparcv8 or sparcv9.
-# Default: sparcv7
-
-#SQUID_CONFIGURE_ARGS=
-# Used in squid package to set build configuration options.
-# Possible: see "configure --help"
-# Default: --enable-cachemgr-hostname=localhost
-#          --enable-icmp
-#          --enable-ipf-transparent
-#          --enable-snmp
-
-#SSH_CONF_DIR=
-# Used in ssh and openssh to set the configuration directory.
-# Possible: any valid directory
-# Default: /etc
-
-#SSH_RSHPATH=
-# Used in ssh to specify standard rsh path
-# Possible: path to rsh binary
-# Default: /usr/bin/rsh
-
-#SSH_SUID=
-# Used in ssh to enable setuid installation of "ssh" binary.
-# Possible: YES, or NO.
-# Default: NO
-
-#SSYNC_PAWD= pawd
-# If you are using amd you'll want to use pawd instead of pwd to derive
-# the current working directory.
-# Possible: pawd, pwd
-# Default: pwd
-
-#TIN_USE_INN_SPOOL
-# Used to enable reading directly in an inn spool.
-# Possible: YES, or NO.
-# Default: NO
-
-#TEAPOP_WITHOUT_VPOP=
-# Compile teapop without virtual domain support
-# Possible: defined, not defined
-# Default: not defined
-
-#TEAPOP_WITHOUT_APOP=
-# Compile teapop without apop support
-# Possible: defined, not defined
-# Default: not defined
-
-#TEXMFSITE=
-# Used in TeXfamily package which depends on teTeX package to specify
-# site-local texmf configuration.
-# Since teTeX package uses ${PREFIX}/share/texmf directory, TeXfamily
-# package uses ${PREFIX}/share/texmf.local.  Therefore, though you can
-# use /usr/local/share/texmf as TEXMFSITE, it causes a conflict if you
-# set ${PREFIX} to /usr/local.  Use another path in such a case.
-# Possible: any valid path
-# Default: none
-
-#USE_CANNA=
-# Used in kinput2 and nvi-m17n to enable Canna kana-kanji converter
-# support.
-# Possible: YES, or NO.
-# Default: YES
-
-#USE_CRYPTO=	YES
-# Used in speakfreely to choose support for encrypted connections.
-# Possible: YES, or NO.
-# Default: YES
-
-#USE_DB2=
-# Used in sendmail to build with database library 2.x from the db package.
-# Possible: YES, or NO.
-# Default: NO
-
-#USE_GIF=
-# Enable GIF support in qt1.  (disabled per default due to licensing
-# problems; future revisions might have no support at all)
-# Also used by tiff-library to enable LZW compression support.
-# Possible: defined, not defined
-# Default: not defined
-
-#USE_GLX=
-# Use Mesa-glx instead of Mesa
-# Possible: not defined, YES
-# Default: not defined
-
-#USE_IDEA=	NO
-# Used in gnupg, speakfreely, and ssh to choose whether to compile using
-# the patented IDEA encryption algorithm.
-# Possible: YES, or NO.
-# Default: package-dependent
-
-#USE_INET6=
-# Enable IPv6 support on certain packages.  It is safer to leave it undefined
-# in mk.conf and obey the default.  Reasons:
-# - it is just fine to use IPv6-ready packages on top of non-IPv6 kernel
-#   (assuming that you have IPv6-ready headers and libraries)
-# - it may cause some trouble to use a package compiled with USE_INET6=NO,
-#   on top of IPv6-ready kernel
-# Possible: not defined, NO, YES
-# Default: YES on IPv6-ready userland, not defined otherwise
-
-#USE_INN=
-# Used in nn and trn to specify use of "inn" instead of "nntpclnt"
-# package to provide "inews" binary.
-# Possible: not defined, YES
-# Default: not defined
-
-#USE_PAM=
-# Used to specify optional support for PAM authentication
-# Possible: defined, not defined
-# Default: not defined
-
-#USE_RSAREF2=
-# Used in openssl to specify use of the RSA reference package instead of
-# the built-in code for the RSA algorithm. (Not recommended!)
-# Possible: YES, or NO.
-# Default: not defined.
-
-#USE_SJ3=
-# Used in kinput2 to enable SJ3 kana-kanji converter support.
-# Possible: YES, or NO.
-# Default: YES
-
-#USE_SOCKS=
-# Used to specify SOCKS firewall support
-# Set this to the version of socks necessary.
-# Possible: 4, 5, not defined
-# Default: not defined
-
-#USE_WNN4=
-# Used in kinput2 to enable FreeWnn (a.k.a.  Wnn4) kana-kanji
-# converter support.
-# Possible: YES, or NO.
-# Default: YES
-
-#USE_XFACE=
-# Used in xemacs package to build in support for xface
-# (pkgsrc/mail/face)
-# Possible: not defined, YES
-# Default: not defined
-
-#VTUN_SYSCONFDIR=	/etc
-# Specifies the location for vtund.conf, the configuration file.
-# If your ${LOCALBASE} is shared between machines use /etc or
-# a similar directory that is local to each machine.
-# Possible: Any valid directory
-# Default: ${LOCALBASE}/etc
-
-#WINDOWMAKER_OPTIONS=
-# Options for building windowmaker package. Used to add support for
-# GNOME, KDE or OPEN LOOK(tm) and to avoid redundancies with KDE.
-# Possible: gnome, kde, openlook, lite
-# Default: gnome kde openlook
-
-#WINDOWMAKER_THEMES=	...
-# Used in wm-themes package to specify the themes which will be
-# installed.
-# Possible: see http://wm.themes.org/
-# Default: FreeBSD-theme
-
-#XAW_TYPE=standard
-# Used in various packages to specify that libXaw is used.
-# Possible: standard, 3d, xpm
-# Default: standard
-
-#ZIP_ENCRYPTION=
-# Add encryption code to zip1
-# Possible: defined, not defined
-# Default: not defined
-
-#ZSH_STATIC=
-# Build statically linked zsh binary - recommended if used as a login shell
-# Possible: defined, not defined
-# Default: not defined
-
-
-#
-#	Overrides for faster or cheaper sites.
-#
-#	Refer to http://www.netbsd.org/Sites/net.html or /usr/doc/MIRRORS
-#	for information on determining the location of NetBSD mirror sites.
-#
-
-# Australia (AARNET).  Swap order of ftp.au.netbsd.org and
-# ftp2.au.netbsd.org if your link to University of Queensland is
-# cheaper/faster than your link to RMIT University (Melbourne).
-#
-#MASTER_SITE_XCONTRIB=	ftp://mirror.aarnet.edu.au/X11/contrib/
-#MASTER_SITE_GNU=	ftp://mirror.aarnet.edu.au/gnu/
-#MASTER_SITE_PERL_CPAN=	ftp://mirror.aarnet.edu.au/perl/CPAN/modules/by-module/
-#MASTER_SITE_TEX_CTAN=	ftp://mirror.aarnet.edu.au/tex-archive/
-#MASTER_SITE_SUNSITE=	ftp://mirror.aarnet.edu.au/sunsite.unc.edu/
-#MASTER_SITE_BACKUP=	\
-#	ftp://ftp.au.netbsd.org/pub/NetBSD/packages/distfiles/ \
-#	ftp://ftp2.au.netbsd.org/pub/NetBSD/packages/distfiles/
-
-# Austria
-#
-#MASTER_SITE_XCONTRIB=	ftp://ftp.at.netbsd.org/hci/X11/contrib/
-#MASTER_SITE_GNU=	ftp://ftp.at.netbsd.org/gnu/gnusrc/
-#MASTER_SITE_PERL_CPAN=	ftp://ftp.at.netbsd.org/languages/perl/CPAN/modules/by-module/
-#MASTER_SITE_TEX_CTAN=	ftp://ftp.at.netbsd.org/publishing/tex/CTAN/
-#MASTER_SITE_SUNSITE=	ftp://ftp.univie.ac.at/systems/linux/sunsite/
-#MASTER_SITE_BACKUP=	ftp://ftp.at.netbsd.org/opsys/NetBSD/packages/distfiles/
-
-# Denmark
-#
-#MASTER_SITE_GNU=	ftp://ftp.sunsite.auc.dk/pub/gnu/
-#MASTER_SITE_PERL_CPAN=	ftp://ftp.sunsite.auc.dk/pub/languages/perl/CPAN/modules/by-module/
-#MASTER_SITE_TEX_CTAN=	ftp://ftp.sunsite.auc.dk/pub/tex/ctan/
-#MASTER_SITE_SUNSITE=	ftp://ftp.sunsite.auc.dk/mirrors/sunsite.unc.edu/pub/Linux/
-#MASTER_SITE_BACKUP=	ftp://ftp.dk.netbsd.org/pub/NetBSD/packages/distfiles/
-
-# Finland
-#
-#MASTER_SITE_XCONTRIB=	ftp://ftp.funet.fi/pub/X11/contrib/
-#MASTER_SITE_GNU= 	ftp://ftp.funet.fi/pub/gnu/gnu/
-#MASTER_SITE_PERL_CPAN=	\
-#	ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module/
-#MASTER_SITE_TEX_CTAN=	ftp://ftp.funet.fi/pub/TeX/CTAN/
-#MASTER_SITE_SUNSITE=	\
-#	ftp://ftp.funet.fi/pub/mirrors/sunsite.unc.edu/pub/Linux/
-#MASTER_SITE_BACKUP=	\
-#	ftp://ftp.fi.netbsd.org/pub/NetBSD/packages/distfiles/
-
-# Japan
-#
-#MASTER_SITE_XCONTRIB=	ftp://ftp.ring.gr.jp/pub/X/opengroup/contrib/
-#MASTER_SITE_GNU=	ftp://ftp.ring.gr.jp/pub/GNU/
-#MASTER_SITE_PERL_CPAN=	ftp://ftp.ring.gr.jp/pub/lang/perl/CPAN/modules/by-module/
-#MASTER_SITE_TEX_CTAN=	ftp://ftp.ring.gr.jp/pub/text/CTAN/
-#MASTER_SITE_SUNSITE=	ftp://sunsite.sut.ac.jp/pub/archives/linux/sunsite-unc/
-#MASTER_SITE_BACKUP=	\
-#	ftp://ftp.ring.gr.jp/pub/NetBSD/packages/distfiles/ \
-#	ftp://ftp.jp.netbsd.org/pub/NetBSD/packages/distfiles/
-
-# United Kingdom
-#
-#MASTER_SITE_XCONTRIB=	ftp://sunsite.org.uk/Mirrors/ftp.x.org/contrib/
-#MASTER_SITE_GNU=	ftp://sunsite.org.uk/packages/gnu/
-#MASTER_SITE_PERL_CPAN=	ftp://sunsite.org.uk/packages/perl/CPAN/modules/by-module/
-#MASTER_SITE_TEX_CTAN=	ftp://sunsite.org.uk/packages/tex/uk-tex/
-#MASTER_SITE_SUNSITE=	ftp://sunsite.org.uk/Mirrors/sunsite.unc.edu/pub/Linux/
-#MASTER_SITE_BACKUP=	ftp://sunsite.org.uk/packages/NetBSD/packages/distfiles/ \
-#	ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/
-
-.endif # BSD_PKG_MK