Initial import of mklivecd-0.1.

mklivecd is a simple shell script that allows you to build a custom 
NetBSD LiveCD on i386-based machines.

Thanks to Thomas Klausner for his help writing the manual page.

11 files changed, 1298 insertions, 0 deletions

diff --git a/sysutils/mklivecd/DESCR b/sysutils/mklivecd/DESCR
new file mode 100644
index 00000000000..443b078322c
--- /dev/null
+++ b/sysutils/mklivecd/DESCR
@@ -0,0 +1,2 @@
+mklivecd is a simple shell script that allows you to build a custom 
+NetBSD LiveCD on i386-based machines.
diff --git a/sysutils/mklivecd/Makefile b/sysutils/mklivecd/Makefile
new file mode 100644
index 00000000000..0226a1f3306
--- /dev/null
+++ b/sysutils/mklivecd/Makefile
@@ -0,0 +1,40 @@
+# $NetBSD: Makefile,v 1.1.1.1 2004/02/26 03:58:51 xtraeme Exp $
+
+DISTNAME=	mklivecd-0.1
+CATEGORIES=	sysutils
+MASTER_SITES=	# empty
+DISTFILES=	# empty
+
+MAINTAINER=	xtraeme@NetBSD.org
+COMMENT=	Build a NetBSD i386 Live CD via command line
+
+DEPENDS+=	cdrecord-[0-9]*:../../sysutils/cdrecord
+
+PKG_INSTALLATION_TYPES=	overwrite pkgviews
+
+ONLY_FOR_PLATFORM=	NetBSD-*-i386
+
+WRKSRC=		${WRKDIR}
+EXTRACT_ONLY=	# empty
+NO_CHECKSUM=	YES
+NO_CONFIGURE=	YES
+NO_BUILDLINK=	YES
+NO_BUILD=	YES
+USE_LANGUAGES=	# empty
+
+INSTALLATION_DIRS=	share/mklivecd sbin
+
+FILES=	    bootkern.mk Makefile.bootfloppy \
+	    KERN-LIVECD mfs_rcd personal_config
+
+do-install:
+	@${SED} -e "s,@PREFIX@,${PREFIX},g" ${FILESDIR}/mklivecd.sh > \
+	    ${WRKDIR}/mklivecd
+	${INSTALL_DATA_DIR} ${PREFIX}/share/mklivecd
+	${INSTALL_SCRIPT} ${WRKDIR}/mklivecd ${PREFIX}/sbin
+	${INSTALL_MAN} ${FILESDIR}/mklivecd.8 ${PREFIX}/man/man8
+.for F in ${FILES}
+	${INSTALL_DATA} ${FILESDIR}/${F} ${PREFIX}/share/mklivecd
+.endfor
+
+.include "../../mk/bsd.pkg.mk"
diff --git a/sysutils/mklivecd/PLIST b/sysutils/mklivecd/PLIST
new file mode 100644
index 00000000000..2b6baa4e987
--- /dev/null
+++ b/sysutils/mklivecd/PLIST
@@ -0,0 +1,9 @@
+@comment $NetBSD: PLIST,v 1.1.1.1 2004/02/26 03:58:51 xtraeme Exp $
+man/man8/mklivecd.8
+sbin/mklivecd
+share/mklivecd/KERN-LIVECD
+share/mklivecd/Makefile.bootfloppy
+share/mklivecd/bootkern.mk
+share/mklivecd/mfs_rcd
+share/mklivecd/personal_config
+@dirrm share/mklivecd
diff --git a/sysutils/mklivecd/distinfo b/sysutils/mklivecd/distinfo
new file mode 100644
index 00000000000..56d3357a416
--- /dev/null
+++ b/sysutils/mklivecd/distinfo
@@ -0,0 +1,2 @@
+$NetBSD: distinfo,v 1.1.1.1 2004/02/26 03:58:51 xtraeme Exp $
+
diff --git a/sysutils/mklivecd/files/KERN-LIVECD b/sysutils/mklivecd/files/KERN-LIVECD
new file mode 100644
index 00000000000..c88d0ecaa19
--- /dev/null
+++ b/sysutils/mklivecd/files/KERN-LIVECD
@@ -0,0 +1,202 @@
+#	$Id: KERN-LIVECD,v 1.1.1.1 2004/02/26 03:58:53 xtraeme Exp $
+
+include "arch/i386/conf/std.i386"
+
+makeoptions	COPTS="-Os"	# Optimise for space. Implies -O2
+maxusers	8		# estimated number of users
+options 	I686_CPU
+options 	INSECURE	# disable kernel security levels
+options 	RTC_OFFSET=0	# hardware clock is this many mins. west of GMT
+options 	USERCONF	# userconf(4) support
+#options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
+#options 	MALLOC_NOINLINE	# Not inlining MALLOC saves memory
+
+#options 	DDB			# in-kernel debugger
+#options 	DDB_HISTORY_SIZE=512	# enable history editing in DDB
+#options 	COMPAT_16		# NetBSD 1.6
+#options 	COMPAT_386BSD_MBRPART	# recognize old partition ID
+
+# File systems
+file-system 	FFS		# UFS
+file-system     UNION           # union file system
+file-system 	MFS		# memory file system
+file-system 	NFS		# Network File System client
+file-system 	CD9660		# ISO 9660 + Rock Ridge file system
+file-system     SMBFS           # smbfs file system
+file-system     MSDOSFS         # MS-DOS file system
+
+#options 	VNODE_OP_NOINLINE   # Not inlining vnode op calls saves mem
+
+# Networking options
+options 	INET		# IP + ICMP + TCP + UDP
+options 	INET6		# IPv6
+
+options         SYSVMSG         # System V-like message queues
+options         SYSVSEM         # System V-like semaphores
+options         SYSVSHM         # System V-like memory sharing
+options         P1003_1B_SEMAPHORE      # p1003.1b semaphore support
+
+# wscons options
+#
+# builtin terminal emulations 
+options 	WSEMUL_VT100		# VT100 / VT220 emulation
+options 	WS_KERNEL_FG=WSCOL_MAGENTA
+options		WSDISPLAY_COMPAT_SYSCONS
+options         WSDISPLAY_COMPAT_PCVT           # emulate some ioctls
+options         WSDISPLAY_COMPAT_USL            # VT handling
+options         WSDISPLAY_COMPAT_RAWKBD         # can get raw scancodes
+
+# Kernel root file system and dump configuration.
+config		netbsd	root on cd0a type cd9660 dumps on none
+
+# Device configuration
+mainbus0 at root
+
+cpu* at mainbus?
+acpi0           at mainbus0
+
+# ACPI devices
+acpibut*       at acpi?                # ACPI Button
+acpiec*        at acpi?                # ACPI Embedded Controller
+acpilid*       at acpi?                # ACPI Lid Switch
+
+# Mainboard devices
+com*           at acpi?                # Serial communications interface
+lpt*           at acpi?                # Parallel port
+npx*           at acpi?                # Math coprocessor
+pckbc*         at acpi?                # PC keyboard controller
+
+# Basic Bus Support
+
+# PCI bus support
+pci*	at mainbus? bus ?
+pci*	at pchb? bus ?
+pci*	at ppb? bus ?
+
+# PCI bridges
+pchb*	at pci? dev ? function ?	# PCI-Host bridges
+pcib*	at pci? dev ? function ?	# PCI-ISA bridges
+ppb*	at pci? dev ? function ?	# PCI-PCI bridges
+
+# ISA bus support
+isa0	at mainbus?
+isa0	at pcib?
+
+# wscons
+pckbd*          at pckbc?               # PC keyboard
+pms*            at pckbc?               # PS/2 mouse for wsmouse
+vga*            at pci? dev ? function ?
+wsdisplay*      at vga? console ?
+wskbd*          at pckbd? console ?
+wsmouse*        at pms? mux 0
+
+# IDE and related devices
+# PCI IDE controllers - see pciide(4) for supported hardware.
+# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
+# how to set up DMA modes for this chip. This may work, or may cause
+# a machine hang with some controllers.
+viaide*         at pci? dev ? function ?        # VIA/AMD/Nvidia IDE controllers
+
+# IDE drives
+# Flags are used only with controllers that support DMA operations
+# and mode settings (e.g. some pciide controllers)
+# The lowest order four bits (rightmost digit) of the flags define the PIO
+# mode to use, the next set of four bits the DMA mode and the third set the
+# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
+# to use, and the last bit must be 1 for this setting to be used.
+# For DMA and UDMA, 0xf (1111) means 'disable'.
+# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
+# (0xc=1100, 0xa=1010, 0xf=1111)
+# 0x0000 means "use whatever the drive claims to support".
+atabus* at ata?
+wd*	at atabus? drive ? flags 0x0000
+
+# ATAPI bus support
+atapibus* at atapi?
+
+# ATAPI devices
+# flags have the same meaning as for IDE drives.
+cd*	at atapibus? drive ? flags 0x0000	# ATAPI CD-ROM drives
+
+# Network Interfaces
+
+# PCI network interfaces
+rtk*	at pci?	dev ? function ?	# Realtek
+ex*     at pci? dev ? function ?        # 3Com 90x[BC]
+
+# MII/PHY support
+ukphy*  at mii? phy ?                   # generic unknown PHYs
+
+
+# Audio Devices
+
+# PCI audio devices
+auvia*  at pci? dev ? function ?        # VIA VT82C686A integrated AC'97 Audio
+
+# Audio support
+audio*  at audiobus?
+
+# USB Controller and Devices
+
+# PCI USB controllers
+# The EHCI is not ready for prime time.
+#ehci*	at pci?	dev ? function ?	# Enhanced Host Controller
+ohci*	at pci?	dev ? function ?	# Open Host Controller
+uhci*	at pci?	dev ? function ?	# Universal Host Controller (Intel)
+
+# USB bus support
+#usb*	at ehci?
+usb*	at ohci?
+usb*	at uhci?
+
+# USB Hubs
+uhub*	at usb?
+uhub*	at uhub? port ? configuration ? interface ?
+
+# USB HID device
+uhidev*	at uhub? port ? configuration ? interface ?
+
+# USB Mice
+ums*	at uhidev? reportid ?
+wsmouse* at ums? mux 0
+
+# USB Keyboards
+ukbd*	at uhidev? reportid ?
+wskbd*	at ukbd? console ? mux 1
+
+# USB Generic HID devices
+uhid*	at uhidev? reportid ?
+
+# USB Printer
+ulpt*	at uhub? port ? configuration ? interface ?
+
+# USB Modem
+umodem*	at uhub? port ? configuration ?
+ucom*	at umodem?
+
+# USB Mass Storage
+umass*	at uhub? port ? configuration ? interface ?
+wd* at umass?
+
+# USB Generic driver
+ugen*	at uhub? port ?
+
+# Pseudo-Devices
+
+# disk/mass storage pseudo-devices
+#pseudo-device  md              1       # memory disk device (ramdisk)
+pseudo-device   vnd             4       # disk-like interface to files
+
+# network pseudo-devices
+pseudo-device   bpfilter        8       # Berkeley packet filter
+pseudo-device   loop                    # network loopback
+
+# miscellaneous pseudo-devices
+pseudo-device   pty             2       # pseudo-terminals (Sysinst needs two)
+pseudo-device   rnd                     # /dev/random and in-kernel generator
+
+# wscons pseudo-devices
+pseudo-device   wsmux                   # mouse & keyboard multiplexor
+
+# a pseudo device needed for SMBFS
+pseudo-device   nsmb                    # experimental - SMB requester
diff --git a/sysutils/mklivecd/files/Makefile.bootfloppy b/sysutils/mklivecd/files/Makefile.bootfloppy
new file mode 100644
index 00000000000..ebe7504aef2
--- /dev/null
+++ b/sysutils/mklivecd/files/Makefile.bootfloppy
@@ -0,0 +1,43 @@
+#	$NetBSD: Makefile.bootfloppy,v 1.1.1.1 2004/02/26 03:58:58 xtraeme Exp $
+#	$Id: Makefile.bootfloppy,v 1.1.1.1 2004/02/26 03:58:58 xtraeme Exp $
+
+# Makefile snippet to create a set of USTAR floppies
+#
+
+#
+# Required variables:
+#	FLOPPYBASE	Basename of floppies. Floppy number ${n} will
+#			be generated as ${FLOPPYBASE}${n}.fs
+#	FLOPPYKERNEL	Kernel to copy
+#
+# Optional variables:
+#	FLOPPYKERNDIR	${FLOPPYKERNEL} is from ${.CURDIR}/../${FLOPPYKERNDIR}
+#	FLOPPY_BOOT	Bootstrap to use.  [${DESTDIR}/usr/mdec/boot]
+#	FLOPPYBOOTOPTIONS Options for installboot, eg -o console=com0
+#
+
+.include <bsd.own.mk>
+.include "${NETBSDSRCDIR}/distrib/common/Makefile.distrib"
+
+FLOPPYMAX?=		1
+FLOPPYSIZE?=		2880
+.if defined(FLOPPYSIZE) && (${FLOPPYSIZE} != 2880)
+FLOPPYMETAFILE!=	printf "USTAR.volsize.%o" ${FLOPPYSIZE}
+.else
+FLOPPYSIZE=	2880
+.endif
+FLOPPYKERNDIR?=		instkernel
+FLOPPYSUFFIX?=		.fs
+MDEC=			${DESTDIR}/usr/mdec
+FLOPPYINSTBOOT=		"${TOOL_INSTALLBOOT} ${FLOPPYBOOTOPTIONS} -m${MACHINE} @IMAGE@ ${MDEC}/bootxx_ustarfs"
+FLOPPYKERNOBJ!=		cd ${FLOPPYKERNDIR} && ${PRINTOBJDIR}
+
+FLOPPY_BOOT?=		${MDEC}/boot
+FLOPPY_NETBSD=		${FLOPPYKERNOBJ}/${FLOPPYKERNEL}
+FLOPPYFILES=		boot ${FLOPPYMETAFILE} netbsd
+
+FLOPPY_RELEASEDIR=	@ISODIR@/stand
+
+.include "${DISTRIBDIR}/common/Makefile.tarfloppy"
+
+.include <bsd.prog.mk>
diff --git a/sysutils/mklivecd/files/bootkern.mk b/sysutils/mklivecd/files/bootkern.mk
new file mode 100644
index 00000000000..c18a9158169
--- /dev/null
+++ b/sysutils/mklivecd/files/bootkern.mk
@@ -0,0 +1,24 @@
+#	$NetBSD: bootkern.mk,v 1.1.1.1 2004/02/26 03:58:56 xtraeme Exp $
+#	$Id: bootkern.mk,v 1.1.1.1 2004/02/26 03:58:56 xtraeme Exp $
+
+# This Makefile builds a boot image on a 2.88M-sized image.
+#
+# Since NetBSD currently can't write 2.88M diskettes, it's only
+# use is as a boot image for El Torito bootable CD-ROM images.
+#
+# To prepare a CD, do the following steps:
+# 1) create a release(7) tree called NetBSD-1.3I
+# 2) create NetBSD-1.3I/boot.i386/ and place boot.fs in that directory
+# 3) do ``mkisofs -A "NetBSD ${version}" -b boot.i386/boot.fs -f \
+#	-o i386-cd.img -r -T NetBSD-1.3I''
+#    (you may omit '-f' if you're not using symlinks in the release tree)
+# This should place the image in i386-cd.img, which can hopefully
+# be used to burn a CD.
+
+FLOPPYBASE=	cdlive-boot
+FLOPPYPAD=	1
+FLOPPYSIZE=	5760
+FLOPPYKERNEL=	netbsd
+FLOPPYKERNDIR=	${.CURDIR}/@KERNEL_NAME@
+
+.include "${.CURDIR}/Makefile.bootfloppy"
diff --git a/sysutils/mklivecd/files/mfs_rcd b/sysutils/mklivecd/files/mfs_rcd
new file mode 100644
index 00000000000..a63318b67cc
--- /dev/null
+++ b/sysutils/mklivecd/files/mfs_rcd
@@ -0,0 +1,57 @@
+# $Id: mfs_rcd,v 1.1.1.1 2004/02/26 03:58:56 xtraeme Exp $
+#
+# Mount mfs directories and unpack the required file
+# before anything.
+
+# PROVIDE: LiveCD
+# BEFORE: disks
+
+. /etc/rc.subr
+
+name="mfsrc"
+rcvar=$name
+
+start_cmd="mfsrc_start"
+stop_cmd="mfsrc_stop"
+
+mfsrc_start()
+{
+	cat <<_EOF
+
+##############################################################################
+##############################################################################
+#######								##############
+#######	    Welcome to the NetBSD Live CD!			##############
+#######	    Please visit us: http://www.NetBSD.org/		##############
+#######								##############
+#######	    Copyright (C) 2004, Juan RP <xtraeme@NetBSD.org>	##############
+#######								##############
+##############################################################################
+##############################################################################
+
+_EOF
+	echo "=> Mounting Memory based filesystems..."
+	mount_mfs @MNT_DEV_ARGS@ swap /dev
+	mount_mfs @MNT_ETC_ARGS@ swap /etc
+	mount_mfs @MNT_VAR_ARGS@ swap /var
+	mount_mfs @MNT_ROOT_ARGS@ swap /root
+	mount_mfs @MNT_TMP_ARGS@ swap /tmp
+	@HOME@
+	@HOMETAR@
+	@USRPKGETC@
+	@USRPKGETCTAR@
+
+	for f in mfs_dev mfs_etc mfs_var mfs_root
+	do
+	    tar xfjp /stand/$f.tbz -C / 
+	done
+	echo "=> Finished successfully."
+}
+
+mfsrc_stop()
+{
+	echo "Please don't do that :-)"
+}
+
+load_rc_config $name
+run_rc_command "$1"
diff --git a/sysutils/mklivecd/files/mklivecd.8 b/sysutils/mklivecd/files/mklivecd.8
new file mode 100644
index 00000000000..a2c1e313d73
--- /dev/null
+++ b/sysutils/mklivecd/files/mklivecd.8
@@ -0,0 +1,309 @@
+.\" $NetBSD: mklivecd.8,v 1.1.1.1 2004/02/26 03:58:54 xtraeme Exp $
+.\"
+.\" mklivecd - Build a NetBSD Live CD for i386 machines
+.\" Copyright (c) 2004 Juan RP <xtraeme@NetBSD.org>
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\"    notice, this list of conditions and the following disclaimer.
+.\" 2. Neither the name of The NetBSD Foundation nor the names of its
+.\"    contributors may be used to endorse or promote products derived
+.\"    from this software without specific prior written permission.
+.\" 3. Neither the name of author nor the names of its contributors may
+.\"    be used to endorse or promote products derived from this software
+.\"    without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+.\" PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+.\" POSSIBILITY OF SUCH DAMAGE.
+.\"
+.Dd February 25, 2004
+.Dt MKLIVECD 8
+.Os
+.Sh NAME
+.Nm mklivecd
+.Nd build a
+.Nx
+Live CD for i386 machines
+.Sh SYNOPSIS
+.Nm
+.Ar target
+.Sh DESCRIPTION
+.Nm
+allows you to build your own
+.Nx
+Live CD, so you don't need to install
+.Nx
+to any disk, because it will run directly from the CD-ROM.
+.Sh CONFIGURATION
+.Nm
+reads the parameters of the main configuration file
+stored inside
+.Pa $HOME/.mklivecd/mklivecd.conf ,
+so be sure you have modified it with your
+preferences before starting any target.
+.Pp
+Configuration files are simple shell scripts that define
+variables.
+The default values shown here are those written in the template when
+issuing the
+.Ar config
+target.
+.Bl -tag -width 15n -offset indent
+.It SOURCEDIR
+The
+.Nx
+source directory.
+Defaults to
+.Pa /usr/src .
+.It PKGSRCDIR
+The
+.Nx
+packages collection directory.
+When the
+.Ar chroot
+target is invoked, the pkgsrc directory will be mounted via
+.Xr mount_null 8 ,
+and you could install any package.
+Defaults to
+.Pa /usr/pkgsrc .
+.It SHAREDIR
+The main directory used to store the Makefiles, kernel, example configuration
+files, etc.
+Defaults to
+.Pa $PREFIX/share/mklivecd/ .
+.It BASEDIR
+Primary directory used to store the main directories and the final ISO image.
+Defaults to
+.Pa $HOME/livecd .
+.It WORKDIR
+Directory used to store the object files and kernel built by the target
+.Ql kernel .
+Defaults to
+.Pa $BASEDIR/work .
+.It ISODIR
+Directory used to store the main
+.Nx
+base distribution.
+Defaults to
+.Pa $BASEDIR/iso .
+.It BASE_SETS_DIR
+The base sets directory.
+Defaults to
+.Pa $HOME/release/binary/sets .
+.It X11_SETS_DIR
+The X11 sets directory.
+Defaults to
+.Pa $BASE_SETS_DIR .
+.It BASE_SETS
+Base sets which will be unpacked into
+.Pa $ISODIR .
+Sets used by default are:
+.Pa etc.tgz base.tgz comp.tgz text.tgz .
+.It X11_SETS
+X11 sets which will be unpacked into
+.Pa $ISODIR .
+Sets used by default are:
+.Pa xbase.tgz xcomp.tgz xfont.tgz xserver.tgz .
+.It ENABLE_X11
+If set to
+.Sy yes
+then X11 sets and configuration files will be unpacked automatically.
+Defaults to
+.Sy no .
+.It BLANK_BEFORE_BURN
+Used in the
+.Ar burn
+target to blank a CD-RW before burning the
+.Nx
+Live CD ISO image.
+Useful if you use CD-RW.
+Defaults to
+.Sy no .
+.It CDROM_DEVICE
+Used in the target
+.Ar burn
+to specify the CD-ROM device.
+Defaults to
+.Sy 15,1,0 .
+.It PERSONAL_CONFIG
+If set to
+.Sy yes ,
+then
+.Pa personal_config
+file will be used.
+See below for details.
+Defaults to
+.Sy no .
+.It BOOTKERN
+Name of the
+.Nx
+kernel used for the boot image.
+Defaults to
+.Sy KERN-LIVECD .
+.It KERNEL_NAME
+Name of the built
+.Nx
+kernel.
+Useful if you want to change the default behaviour of the build process.
+Defaults to
+.Sy MKLIVECD .
+.It IMAGE_NAME
+Name of the final ISO image, e.g.:
+.Pa My_NetBSD_Live_CD_ISO_Image.iso .
+Defaults to
+.Sy NetBSD-LiveCD .
+.It PKG_SYSCONFDIR
+Directory where the pkgsrc settings are stored, by default
+.Nm
+preserves this behaviour and uses
+.Pa usr/pkg/etc .
+.It REMOVE_DIRS
+Take care with this option, because it will remove all directories when
+the target
+.Ar iso
+is invoked.
+It could be useful if you don't want to include some directories
+on the CD, or your free space is small.
+Defaults to
+.Pa altroot rescue usr/share/info .
+.It MNT_{MOUNT_POINT}_ARGS
+This specifies the arguments passed to the
+.Xr mount 8
+command used in the
+.Pa mfs_rcd
+script, when the
+.Nx
+Live CD is booted.
+You shouldn't add
+.Sy swap
+at the end, because it will be added automatically by
+the script.
+.El
+.Sh TARGETS
+A target specifies what
+.Nm
+should do (as in make).
+The following list describes all supported targets,
+in the logical order in which you should call them.
+.Bl -tag -width 15n -offset indent
+.It Ar config
+Create a sample
+.Pa mklivecd.conf
+file.
+You should edit it after the creation as you will probably want to
+change the default configuration, especially paths.
+.It Ar kernel
+Builds the specified kernel
+.Pa $BOOTKERN
+into the
+.Pa $ISODIR
+directory.
+.It Ar base
+Install the
+.Pa $BASE_SETS
+and
+.Pa $X11_SETS
+into the
+.Pa $ISODIR
+directory and prepare the base system for the next target,
+which is the most important:
+.Ar chroot .
+.It Ar chroot
+Enters the chroot environment.
+Uses
+.Xr ksh 1
+as default shell.
+.It Ar iso
+Builds the ISO image
+.Pa $IMAGE_NAME
+into
+.Pa $BASEDIR
+and removes all directories specified in
+.Pa $REMOVE_DIRS
+before it, to save some space.
+.It Ar burn
+Burns the ISO image
+.Pa $IMAGE_NAME
+on the CD-ROM with
+.Xr cdrecord 1 .
+Use the
+.Pa $CDROM_DEVICE
+variable to specify the default device.
+.It Ar clean
+Cleans the
+.Pa $WORKDIR
+directory and the base
+.Nx
+tree in
+.Pa $ISODIR ,
+except the CD-ROM boot image
+.Pa /stand/cdlive-boot.fs
+and the
+.Nx
+kernel
+.Pa /netbsd .
+.El
+.Ss What should I do in the chroot jail?
+While working in the chroot environment, you can
+add users, install binary packages, modify
+.Pa /etc/ttys ,
+etc.
+You can enter the chroot as often as you want,
+.Nm
+will create the tarballs automatically when you leave
+the chroot.
+.Ss How can I use the PERSONAL_CONFIG option?
+When
+.Ar PERSONAL_CONFIG
+is set to
+.Sy yes ,
+.Pa $HOME/.mklivecd/personal_config
+will be used.
+For example, you can copy some configuration directories
+from
+.Ar $HOME
+to the
+.Ar $ISODIR/$HOME
+directory.
+Please take a look at the example file located in
+.Ar ${PREFIX}/share/mklivecd .
+.Sh NOTES
+.Pa PKG_SYSCONFDIR
+defaults to
+.Ar usr/pkg/etc
+without a starting slash.
+This shouldn't be added because
+.Nm
+adds this automatically in the script, otherwise your real PKG_SYSCONFDIR
+directory will be copied instead of the one located in
+.Pa $ISODIR .
+.Pp
+An example kernel config file,
+.Pa KERN-LIVECD ,
+has been installed into
+.Ar ${PREFIX}/share/mklivecd ,
+based on the -current branch.
+You should copy your own kernel config file into
+.Ar $HOME/.mklivecd .
+The
+.Sy BOOTKERN
+variable should point at it.
+.Sh SEE ALSO
+.Xr packages 7 ,
+.Xr mount_null 8
+.Sh AUTHORS
+The
+.Nm
+utility was written by
+.An Juan RP Aq xtraeme@NetBSD.org .
diff --git a/sysutils/mklivecd/files/mklivecd.sh b/sysutils/mklivecd/files/mklivecd.sh
new file mode 100755
index 00000000000..4ae406b4ef2
--- /dev/null
+++ b/sysutils/mklivecd/files/mklivecd.sh
@@ -0,0 +1,583 @@
+#!/bin/sh
+#
+# $NetBSD: mklivecd.sh,v 1.1.1.1 2004/02/26 03:58:56 xtraeme Exp $
+#
+# Copyright (c) 2004 Juan RP <xtraeme@NetBSD.org>
+# All rights Reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name of author nor the names of its contributors may
+#    be used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# ====================================================================== #
+#  mklivecd - Build a NetBSD LiveCD! for i386 machines.			 #
+# ====================================================================== #
+
+progname=$(basename $0)
+config_dir="$HOME/.mklivecd/"
+config_file="$config_dir/mklivecd.conf"
+pers_conffile="personal_config"
+tmp_file="/tmp/${progname}.$$"
+
+MKISOFS="@PREFIX@/bin/mkisofs"
+CDRECORD="@PREFIX@/bin/cdrecord"
+
+# ====================================================================== #
+#  My functions :-)							 #
+# ====================================================================== #
+
+usage()
+{
+	cat <<_usage_
+
+	${progname}: [target]
+
+	Target operations:
+
+	kernel	    Build and install the Boot kernel image
+	iso	    Build the ISO 9660 image
+	burn	    Burn the ISO image via cdrecord
+	base	    Install the base/x11 sets into ISODIR
+	chroot	    chroot into the livecd
+	clean	    Clean the work directory
+	config	    Create the default configuration file
+
+_usage_
+
+	exit 1
+}
+
+showmsg()
+{
+	echo "===> $@"
+}
+
+bye()
+{
+	_exitarg="$1"
+	rm -f $tmp_file; exit $_exitarg
+}
+
+do_conf()
+{
+	BASE_VARS="SOURCEDIR PKGSRCDIR SHAREDIR BASEDIR WORKDIR ISODIR \
+		   BASE_SETS_DIR X11_SETS_DIR BASE_SETS X11_SETS"
+
+	MISC_VARS="ENABLE_X11 BLANK_BEFORE_BURN CDROM_DEVICE PERSONAL_CONFIG \
+		   BOOTKERN KERNEL_NAME IMAGE_NAME PKG_SYSCONFDIR REMOVE_DIRS"
+
+	MNT_VARS="MNT_DEV_ARGS MNT_ETC_ARGS MNT_VAR_ARGS \
+		  MNT_ROOT_ARGS MNT_TMP_ARGS MNT_HOME_ARGS \
+		  MNT_PKG_SYSCONFDIR_ARGS"
+
+	# Base directories/sets
+        : ${SOURCEDIR:=/usr/src}
+	: ${PKGSRCDIR:=/usr/pkgsrc}
+	: ${SHAREDIR:=@PREFIX@/share/mklivecd}
+	: ${BASEDIR:=$HOME/livecd}
+	: ${WORKDIR:=${BASEDIR}/work}
+	: ${ISODIR:=${BASEDIR}/iso}
+	: ${BASE_SETS_DIR:=$HOME/release/binary/sets}
+	: ${X11_SETS_DIR:=${BASE_SETS_DIR}}
+	: ${BASE_SETS:=etc.tgz base.tgz comp.tgz text.tgz}
+	: ${X11_SETS:=xbase.tgz xcomp.tgz xfont.tgz xserver.tgz}
+
+	# Miscellaneous options
+	: ${ENABLE_X11:=no}
+	: ${BLANK_BEFORE_BURN:=no}
+	: ${CDROM_DEVICE:=15,1,0}
+	: ${PERSONAL_CONFIG:=no}
+	: ${BOOTKERN:=KERN-LIVECD}
+	: ${KERNEL_NAME:=MKLIVECD}
+	: ${IMAGE_NAME:=NetBSD-LiveCD}
+	: ${PKG_SYSCONFDIR:=usr/pkg/etc}
+	: ${REMOVE_DIRS:=altroot usr/share/info}
+	
+	# Mount arguments
+	: ${MNT_DEV_ARGS:=-o noatime -s 5m}
+	: ${MNT_ETC_ARGS:=-o noatime -s 2m}
+	: ${MNT_VAR_ARGS:=-o noatime -s 10m}
+	: ${MNT_ROOT_ARGS:=-o noatime -s 5m}
+	: ${MNT_TMP_ARGS:=-o noatime -s 10m}
+	: ${MNT_HOME_ARGS:=-o noatime -s 50m}
+	: ${MNT_PKG_SYSCONFDIR_ARGS:=-o noatime -s 1m}
+
+	if [ ! -d $config_dir ]; then
+		mkdir $config_dir
+	fi
+
+	if [ ! -f $config_dir/$pers_conffile ]; then
+		cp $SHAREDIR/$pers_conffile $config_dir
+	fi
+
+	if [ ! -f $config_file ]; then
+		cat >> $config_file <<EOF
+# --*-sh-*--    
+#               
+# mklivecd - configuration file
+# See mklivecd(8) for a detailed description of each variable.
+#
+# Generated automatically on $(date).
+
+EOF
+		echo "# Base directories/options" >> $config_file
+		for var in `echo $BASE_VARS | tr ' ' '\n'`
+		do
+		    eval val=\""\$$var"\"
+		    echo "$var=\"$val\"" >> $config_file
+		done
+		echo >> $config_file
+
+		echo "# Miscellaneous options" >> $config_file
+		for var in `echo $MISC_VARS | tr ' ' '\n'`
+		do
+		    eval val=\""\$$var"\"
+		    echo "$var=\"$val\"" >> $config_file
+		done
+		echo >> $config_file
+
+		echo "# Mount arguments" >> $config_file
+		for var in `echo $MNT_VARS | tr ' ' '\n'`
+		do
+		    eval val=\""\$$var"\"
+		    echo "$var=\"$val\"" >> $config_file
+		done
+		echo >> $config_file
+
+		echo "=> Configuration file created, now please edit it."
+	else
+		. $config_file
+
+		if [ ! -d $SOURCEDIR/sys ]; then
+		    showmsg "Cannot find $SOURCEDIR, please download"
+		    showmsg "the src module."
+		    bye 1
+		fi
+	fi
+}
+
+do_conf_reset()
+{
+	for F in ${BASE_VARS} ${MISC_VARS} ${MNT_VARS}
+	do
+		eval $F=\"\"
+	done
+}
+
+do_cdlive()
+{
+	. $config_file
+
+	vars="$BASEDIR $ISODIR $WORKDIR"
+
+	for value in $vars
+	do
+		if [ ! -d $value ]; then
+			mkdir -p $value
+		fi
+	done
+
+	case "$1" in
+	kernel)
+		showmsg "Building boot image on $(date)"
+		echo
+		showmsg "Using the following values:"
+		showmsg "   SHAREDIR=$SHAREDIR"
+		showmsg "   WORKDIR=$WORKDIR"
+		showmsg "   ISODIR=$ISODIR"
+		showmsg "   BASEDIR=$BASEDIR"
+		showmsg "Using kernel: $BOOTKERN"
+		showmsg "Kernel name: $KERNEL_NAME"
+		echo
+		sleep 2
+		sed -e "s,@KERNEL_NAME@,${KERNEL_NAME}," \
+		    $SHAREDIR/bootkern.mk > $WORKDIR/Makefile
+		sed -e "s,@ISODIR@,${ISODIR},g" $SHAREDIR/Makefile.bootfloppy \
+			> $WORKDIR/Makefile.bootfloppy
+
+		# if there's a kernel in ~/.mklivecd, use it, otherwise
+		# use the default one located in SHAREDIR.
+		if [ -s $config_dir/$BOOTKERN ]; then
+		    cp $config_dir/$BOOTKERN $WORKDIR
+		else
+		    cp $SHAREDIR/$BOOTKERN $WORKDIR
+		fi
+
+		cd $WORKDIR
+		[ ! -d $WORKDIR/$KERNEL_NAME ] && mkdir $WORKDIR/$KERNEL_NAME
+		config -s $SOURCEDIR/sys -b $WORKDIR/$KERNEL_NAME \
+		    $BOOTKERN
+		cd $KERNEL_NAME
+		make depend
+		make COPTS="-Os"	    # Don't use additional flags
+		cd $WORKDIR
+		make USETOOLS=no COPTS=    # Don't use tools/copts
+		if [ $? -eq 0 ]; then
+		    [ ! -d $ISODIR/stand ] && mkdir -p $ISODIR/stand
+		    cp cdlive-boot1.fs $ISODIR/stand/cdlive-boot.fs
+		    cp netbsd $ISODIR
+		    make clean
+		    rm -rf $KERNEL_NAME
+		    echo
+		    showmsg "Build successful"
+		    showmsg "Boot/kernel image installed!"
+		    showmsg "Next step: ${progname} base"
+		    echo
+		else
+		    echo
+		    showmsg "Build failed"
+		    showmsg "Boot/kernel image not installed!"
+		    echo
+		fi
+	;;
+	base)
+		chown root:wheel $ISODIR/netbsd $ISODIR/stand/*
+
+		for F in ${BASE_SETS}
+		do
+		    if [ ! -f $BASE_SETS_DIR/$F ]; then
+			showmsg "Target base failed!"
+			showmsg "Can't find $F, exiting."
+			bye 1
+		    fi
+		done
+
+		showmsg "Installing base sets"
+		for S in ${BASE_SETS}
+		do
+		    if [ -f $BASE_SETS_DIR/$S ]; then
+			echo "=> Unpacking $S"
+			tar xfzp $BASE_SETS_DIR/$S -C $ISODIR
+		    fi
+		done
+
+		if [ "${ENABLE_X11}" = "yes" ]; then
+		    for FX in ${X11_SETS}
+		    do
+			if [ ! -f $X11_SETS_DIR/$FX ]; then
+			    showmsg "Can't find $FX, disabling X11."
+			    DISABLE_X11=yes
+			    break
+			fi
+		    done
+
+		    if [ "$DISABLE_X11" = "" ]; then
+			showmsg "Installing X11 sets"
+			for X in ${X11_SETS}
+			do
+			    if [ -f $X11_SETS_DIR/$X ]; then
+				echo "=> Unpacking $X"
+				tar xfzp $X11_SETS_DIR/$X -C $ISODIR
+			    fi
+			done
+		    fi
+		fi # ENABLE_X11
+			
+		cp $SHAREDIR/mfs_rcd $ISODIR/etc/rc.d
+
+		# /etc/rc.conf
+		showmsg "Installing configuration files"
+		sed -e "s,rc_configured=NO,rc_configured=YES,g" \
+			$ISODIR/etc/rc.conf > $ISODIR/etc/rc.conf.fixed
+		mv $ISODIR/etc/rc.conf.fixed $ISODIR/etc/rc.conf
+		touch $ISODIR/etc/fstab
+
+		(						    \
+		echo "mfsrc=yes";				    \
+		echo "dhclient=yes dhclient_flags=-q";		    \
+		echo "wscons=yes";				    \
+		echo "hostname=$KERNEL_NAME";			    \
+		echo "nfs_client=yes";				    \
+		echo "inetd=no";				    \
+		echo "ntpdate=yes";				    \
+		echo "savecore=no";				    \
+		) >> $ISODIR/etc/rc.conf
+
+		# /etc/rc.d/root could umount the mfs directories, 
+		# so it's best not to touch them.
+
+		rm $ISODIR/etc/rc.d/root
+		cat > $ISODIR/etc/rc.d/root <<_EOF_
+#!/bin/sh
+#
+# \$NetBSD: mklivecd.sh,v 1.1.1.1 2004/02/26 03:58:56 xtraeme Exp $
+# 
+
+# PROVIDE: root
+# REQUIRE: fsck
+
+. /etc/rc.subr
+
+name="root"
+start_cmd="root_start"
+stop_cmd=":"
+
+root_start()
+{
+        rm -f /fastboot
+}
+
+load_rc_config \$name
+run_rc_command "\$1"
+_EOF_
+		# Make sure the devices are created before creating
+		# the .tbz files.
+
+		showmsg "Creating devices"
+		cd $ISODIR/dev && ./MAKEDEV all
+		echo
+		showmsg "Target base successful"
+		showmsg "Base system installed"
+		showmsg "Next step: ${progname} chroot"
+	;;
+	chroot)
+		if [ ! -f $ISODIR/.prompt_done ]; then
+		    (						    \
+		    echo "export PS1=\"$KERNEL_NAME> \"";	    \
+		    echo "set -o emacs";			    \
+		    ) > $ISODIR/etc/profile
+		    touch $ISODIR/.prompt_done
+		else
+		    showmsg "Prompt already set!"
+		fi
+
+		if [ ! -d $ISODIR/usr/pkgsrc ]; then
+		    mkdir $ISODIR/usr/pkgsrc
+		fi
+
+		if [ ! -f $ISODIR/usr/share/misc/termcap ]; then
+		    cp /usr/share/misc/termcap* \
+			$ISODIR/usr/share/misc
+		fi
+
+		showmsg "Entering into the chroot!"
+
+		if [ -d $PKGSRCDIR ]; then
+		    showmsg "Mounting pkgsrc directory."
+		    mount_null $PKGSRCDIR $ISODIR/usr/pkgsrc
+		else
+		    showmsg "Can't find $PKGSRCDIR, disabling it"
+		fi
+
+		echo
+		chroot $ISODIR /bin/ksh
+		echo
+		showmsg "Unmounting pkgsrc."
+
+		if [ ! -d $ISODIR/root ]; then
+		    showmsg "Target chroot failed!"
+		    showmsg "Can't find root directory, exiting."
+		    bye 1
+		fi
+
+		cd $ISODIR
+		cp -f $SHAREDIR/mfs_rcd $ISODIR/etc/rc.d
+
+		SUBST_H="mount_mfs $MNT_HOME_ARGS swap /home"
+		SUBST_HT="tar xfjp /stand/mfs_home.tbz -C /"
+		SUBST_S="mount_mfs $MNT_PKG_SYSCONFDIR_ARGS swap /$PKG_SYSCONFDIR"
+		SUBST_ST="tar xfjp /stand/mfs_pkg_sysconfdir.tbz -C /"
+
+		sed -e "s,@MNT_DEV_ARGS@,$MNT_DEV_ARGS,g" \
+		    -e "s,@MNT_ETC_ARGS@,$MNT_ETC_ARGS,g" \
+		    -e "s,@MNT_VAR_ARGS@,$MNT_VAR_ARGS,g" \
+		    -e "s,@MNT_ROOT_ARGS@,$MNT_ROOT_ARGS,g" \
+		    -e "s,@MNT_TMP_ARGS@,$MNT_TMP_ARGS,g" \
+		    $ISODIR/etc/rc.d/mfs_rcd > $ISODIR/etc/rc.d/mfs_rcd.in
+		mv $ISODIR/etc/rc.d/mfs_rcd.in $ISODIR/etc/rc.d/mfs_rcd
+		
+		for U in root var dev etc home
+		do
+		    if [ -d $ISODIR/$U ]; then
+			tar cfjp $ISODIR/stand/mfs_$U.tbz $U >/dev/null 2>&1
+			showmsg "Creating /stand/mfs_$U.tbz"
+		    fi
+		done
+ 
+		if [ -d $ISODIR/home ]; then
+		    sed -e "s,@HOME@,$SUBST_H," \
+			-e "s,@HOMETAR@,$SUBST_HT," \
+			$ISODIR/etc/rc.d/mfs_rcd > $ISODIR/etc/rc.d/mfs_rcd.f
+			mv $ISODIR/etc/rc.d/mfs_rcd.f $ISODIR/etc/rc.d/mfs_rcd
+		else
+		    sed -e "s,@HOME@,," -e "s,@HOMETAR@,," \
+			$ISODIR/etc/rc.d/mfs_rcd > $ISODIR/etc/rc.d/mfs_rcd.f
+		    mv $ISODIR/etc/rc.d/mfs_rcd.f $ISODIR/etc/rc.d/mfs_rcd
+		fi
+                        
+		if [ -d $ISODIR/$PKG_SYSCONFDIR ]; then
+		    tar cfjp $ISODIR/stand/mfs_pkg_sysconfdir.tbz \
+			$PKG_SYSCONFDIR >/dev/null 2>&1
+		    showmsg "Creating /stand/mfs_pkg_sysconfdir.tbz"
+		    sed -e "s,@USRPKGETC@,$SUBST_S," \
+			-e "s,@USRPKGETCTAR@,$SUBST_ST," \
+			$ISODIR/etc/rc.d/mfs_rcd > $ISODIR/etc/rc.d/mfs_rcd.f
+		    mv $ISODIR/etc/rc.d/mfs_rcd.f $ISODIR/etc/rc.d/mfs_rcd
+		else
+		    sed -e "s,@USRPKGETC@,," -e "s,@USRPKGETCTAR@,," \
+			$ISODIR/etc/rc.d/mfs_rcd > $ISODIR/etc/rc.d/mfs_rcd.f
+		    mv $ISODIR/etc/rc.d/mfs_rcd.f $ISODIR/etc/rc.d/mfs_rcd
+		fi
+
+		if [ "${ENABLE_X11}" = "yes" ]; then
+		    if [ -f /etc/X11/XF86Config ]; then
+			cp /etc/X11/XF86Config $ISODIR/etc/X11
+		    fi
+		fi
+
+		if [ "${PERSONAL_CONFIG}" = "yes" -a -f $config_dir/$pers_conffile ]; then
+		    echo
+		    showmsg "Running personal config file"
+		    . $config_dir/$pers_conffile
+		    showmsg "Done!"
+		    echo
+		elif [ "${PERSONAL_CONFIG}" = "yes" -a ! -f $config_dir/$pers_conffile ]; then
+		    echo
+		    showmsg "Can't find personal configuration file, please"
+		    showmsg "disable it if you don't want to use it, or otherwise"
+		    showmsg "use the example file to see how to create your"
+		    showmsg "own custom file."
+		    echo
+		else
+		    continue
+		fi
+		
+		# Make sure mfs_rcd has the right permissions, because
+		# it could be critical!.
+
+		chmod -R a+rx $ISODIR/etc/rc.d
+
+		umount $ISODIR/usr/pkgsrc
+		rm $ISODIR/.prompt_done
+		showmsg "Size: $(du -sh $ISODIR)"
+	;;
+	clean)
+		showmsg "Cleaning WORKDIR: $WORKDIR"
+		rm -rf $WORKDIR
+		for F in bin dev etc lib libexec mnt rescue \
+		    root tmp usr var sbin home
+		do
+		    if [ -d $ISODIR/$F ]; then
+			rm -rf $ISODIR/$F
+		    fi
+		done
+		showmsg "Done"
+	;;
+	iso)
+		if [ ! -f $ISODIR/netbsd ]; then
+			showmsg "Target iso failed!"
+			showmsg "Can't find NetBSD kernel"
+			bye 1
+		elif [ ! -f $ISODIR/stand/mfs_etc.tbz ]; then
+			showmsg "Target iso failed!"
+			showmsg "Can't find mfs_etc.tbz file"
+			bye 1
+		fi
+
+		echo
+		showmsg "Removing not needed directories:"
+		for RM in ${REMOVE_DIRS}
+                do
+                    if [ -d $ISODIR/$RM ]; then
+                        echo "=> Removing $RM..."; rm -rf $ISODIR/$RM
+		    else
+			echo "=> Nonexistent directory: $RM"
+		    fi
+		done
+
+		sleep 2 # Because I want to see the messages :-)
+		
+		if [ ! -f $BASEDIR/$IMAGE_NAME.iso ]; then
+		    echo
+		    showmsg "Creating ISO CD9660 image"
+		    $MKISOFS -nobak -b stand/cdlive-boot.fs \
+			-o $BASEDIR/$IMAGE_NAME.iso -J -R $ISODIR
+		fi
+
+	;;
+	burn)
+		if [ ! -f $BASEDIR/$IMAGE_NAME.iso ]; then
+		    showmsg "Can't find iso image!"
+		    bye 1
+		fi
+
+		if [ $BLANK_BEFORE_BURN = "yes" ]; then
+		    $CDRECORD dev=$CDROM_DEVICE -v blank=fast
+		fi
+		
+		$CDRECORD dev=$CDROM_DEVICE -v $BASEDIR/$IMAGE_NAME.iso
+	;;
+	esac
+	
+}
+
+checkconf()
+{
+    if [ -f $config_file ]; then
+	[ `id -u` -ne 0 ] && showmsg "must be run as root" && bye 1
+	    do_conf_reset; . $config_file; do_conf
+    else
+	showmsg "$config_file does not exist"
+	bye 1
+    fi
+}
+
+# =========================================================================== #
+#  Main program								      #
+# =========================================================================== #
+
+if [ $# -lt 1 ]; then
+	usage
+fi
+
+case "$1" in
+	iso)
+		checkconf
+		do_cdlive iso
+	;;
+	kernel)
+		do_cdlive kernel
+	;;
+	base)
+		checkconf
+		do_cdlive base
+	;;
+	chroot)
+		checkconf
+		do_cdlive chroot
+	;;
+	clean)
+		checkconf
+		do_cdlive clean
+	;;
+	config)
+		do_conf
+	;;
+	burn)
+		checkconf
+		do_cdlive burn
+	;;
+esac
+
+exit 0 # agur!
diff --git a/sysutils/mklivecd/files/personal_config b/sysutils/mklivecd/files/personal_config
new file mode 100644
index 00000000000..424a70a8bbf
--- /dev/null
+++ b/sysutils/mklivecd/files/personal_config
@@ -0,0 +1,27 @@
+#
+# $Id: personal_config,v 1.1.1.1 2004/02/26 03:58:51 xtraeme Exp $
+#
+# Personal configuration example file for mklivecd.
+#
+
+for f in zshrc xinitrc
+do
+    if [ ! -f $ISODIR/$HOME/.$f ]; then
+	cp $HOME/.$f $ISODIR/$HOME
+	echo "=> Copying .$f"
+    else
+	echo "=> Skipping .$f, already exists"
+    fi
+done
+    
+for d in pekwm sylpheed gkrellm2 xmms xchat2
+do
+    if [ ! -d $ISODIR/$HOME/.$d ]; then
+	cp -r $HOME/.$d $ISODIR/$HOME
+	echo "=> Copying .$d"
+    else
+	echo "=> Skipping .$d, already exists"
+    fi
+done
+
+chown -R juan:users $ISODIR/$HOME