diff options
author | sborrill <sborrill@pkgsrc.org> | 2007-01-24 14:58:48 +0000 |
---|---|---|
committer | sborrill <sborrill@pkgsrc.org> | 2007-01-24 14:58:48 +0000 |
commit | 24b685bf74e262a76b9a70d52b3311a8df82fb0e (patch) | |
tree | d008ebb07f30af451f13b41cdde5a7ad6b0c9944 /www | |
parent | 24f2398eb974b34b63a21cacfb483496452d1500 (diff) | |
download | pkgsrc-24b685bf74e262a76b9a70d52b3311a8df82fb0e.tar.gz |
Oops, this shouldn't have been imported.
Diffstat (limited to 'www')
-rw-r--r-- | www/ap-auth-external/INSTALL | 388 |
1 files changed, 0 insertions, 388 deletions
diff --git a/www/ap-auth-external/INSTALL b/www/ap-auth-external/INSTALL deleted file mode 100644 index a31036b9501..00000000000 --- a/www/ap-auth-external/INSTALL +++ /dev/null @@ -1,388 +0,0 @@ -How to install mod_auth_external.c into the Apache source tree. - -NOTES: - - * If you want to use the HARDCODE function option follow the instructions - in the INSTALL.HARDCODE file in this directory before following these - instructions. - - * These instructions are for Apache version 1.3. I don't know if this version - of mod_auth_external is still compatible with older versions of Apache. - - * There are two ways of installing mod_auth_external. - - (1) You can statically link it with Apache. This requires rebuilding - Apache in such a way that mod_auth_external will be compiled in. - - (2) You can make mod_auth_external a dynamically loaded module. If - your Apache has been built to support dynamically loaded modules - you can do this without rebuilding Apache, so it is pretty easy. - Performance may be slightly worse with this option. For information - on dynamically loaded modules see http://www.apache.org/docs/dso.html - - Instructions for both options are given here. - - * If you are statically linking mod_auth_external into Apache, you must - rebuild Apache. There are two methods of building Apache, the APACI - method and the manual method. Instructions for both are given here. The - configuration part is the same either way. - - * There is also documentation in the README file, in the AUTHENTICATORS file - and at the front of the mod_auth_external.c source file. If you find this - document unclear, reading those may help. - - -INSTALL METHOD A: Dynamically Linking Mod_auth_external using apxs: -------------------------------------------------------------------- - -Step 1: - Ensure that your Apache server is configured to handle dynamically - loaded modules. Redhat Linux 6.1 does. To check this, run Apache - server with the -l command flag, like - - httpd -l - - If mod_so.c is one of the compiled-in modules, then you are ready - to go. - -Step 2: - Compile the module using the following command in the mod_auth_external - distribution directory: - - apxs -c mod_auth_external.c - - 'Apxs' is the Apache extension tool. It is part of the standard - Apache installation. If you don't have it, then your Apache server - is probably not set up for handling dynamically loaded modules. - This should create a file named 'mod_auth_external.so'. - - AIX Note: I'm told that on AIX the 'apxs' command above compiles - mod_auth_external.c into mod_auth_external.o correctly, but - generation of the shared library file fails with a message like - "No csects or exported symbols have been saved." If this happens, - create a file in the current directory named mod_auth_external.exp - which contains the two lines below: - - #! mod_auth_external.o - external_auth_module - - Then run - - apxs -c mod_auth_external.c -bE:mod_auth_external.exp - -Step 3: - Install the module. Apxs can do this for you too. Do the following - command (as root so you can write to Apache's directories and config - files): - - apxs -i -a mod_auth_external.so - - This will copy mod_auth_external.so into the proper place, and add - appropriate AddModule and LoadModule commands to the configuration - files. (Actually, it may get the LoadModule command wrong. See - below.) - -Step 4: - Go to the CONFIGURATION instructions below. - - -INSTALL METHOD B: Statically Linking by building Apache with APACI: -------------------------------------------------------------------- - -Step 1: - Read the instructions on how to configure the Apache server in the - INSTALL file provided with the Apache source. - -Step 2: - When you run the ./configure script, include an --add-module flag, - giving the full pathname to the mod_auth_external.c file in this - distribution. For example, if you have unpacked this distribution - in /usr/local/src/mod_auth_external and are building Apache for - installation in /usr/local/apache, you might do: - - ./configure --prefix=/usr/local/apache \ - --add-module=/usr/local/src/mod_auth_external/mod_auth_external.c - - This will copy the mod_auth_external.c file into the correct place in - the Apache source tree and set things up to link it in. - -Step 3: - Type "make" to compile Apache and "make install" to install it. - -Step 4: - Go to the CONFIGURATION instructions below. - - -INSTALL METHOD C: Statically Linking by manually building Apache: ------------------------------------------------------------------- - -Step 1: - Read the instructions on how to configure the Apache server in the - src/INSTALL file provided with the Apache source. - -Step 2: - Copy the mod_auth_external.c file from this distribution into the - src/modules/extra subdirectory of the Apache source tree. - -Step 3: - Add the following line to the Apache 'Configuration' file: - - AddModule modules/extra/mod_auth_external.c - -Step 4: - Run "./Configure" and "make" and "make install" in the src directory - to configure, compile and install Apache. - -Step 4: - Go to the CONFIGURATION instructions below. - -CONFIGURATION: --------------- - -There are two parts to doing the configuration. First you define the -external program and communication method to use in your httpd.conf file, -identifying them with a keyword. Then you set up specific directories to -use that authenticator, referencing it by keyword. - -Step 1: - If you are using dynamic loading, you'll need to make sure that - there is a proper "LoadModule" command in the httpd.conf file. - This should have been put there by 'apxs' but, at least under - RedHat 6.1, it gets it wrong. Basically, the 'LoadModule' command - should look a lot like all the other LoadModule commands. Something - like - - LoadModule external_auth_module modules/mod_auth_external.so - - where the second part is the path from Apache's root directory - to the location where the module is stored. - - Make sure that apxs didn't put this directive inside any inappropriate - <IfDefine> directives. Under RedHat 7.1 it likes to put it inside - <IfDefine HAVE_PYTHON> which makes no sense. - - Also, if you previously had mod_auth_external installed and are - installing a new version, apxs may have put a second LoadModule - command into httpd.conf. You only need one. Get rid of the extra. - -Step 2: - Check you httpd.conf file to see if there is a "ClearModuleList" - command. If this exists, then you need to add a command like: - - AddModule mod_auth_external.c - - somewhere below "ClearModuleList" command (probably somewhere among - the dozens of other AddModule commands). If you used 'apxs' to - install mod_auth_external, then this should already be done, but - it may again be stashed in an inappropriate <IfDefine>. - - The standard Apache configuration files don't have a "ClearModuleList" - command and don't need an "AddModule" command. However the standard - RedHat configuration files do. - -Step 3: - Add the following line(s) to your server's httpd.conf. - - If you are using virtual hosts, put them at the end of the - appropriate <VirtualHost> block. The declarations must be *inside* - the <VirtualHost> block to work for a virtual host. They are not - inherited from the primary host to the virtual hosts. Note that most - Apache SSL servers are set up as virtual hosts, so you'll probably - need to put these definitions in the <VirtualHost> block for use with - an SSL server. - - Otherwise, just put them anywhere (just before the Virtual Hosts - section of the config file might make the most sense). - - For external authentication programs: - AddExternalAuth <keyword> <path-to-authenticator> - SetExternalAuthMethod <keyword> <method> - - For HARDCODE functions: - AddExternalAuth <keyword> <type>:<path where config file is> - SetExternalAuthMethod <keyword> function - - <keyword> is some name you choose. You can configure multiple - different external authenticators by using different keywords for - them. - - <path-to-authenticator> is normally the full path where you installed - your external authentication program. If you put it in quotes, you - can include command-line arguments, but these arguments won't be - processed by a shell, so you can't use wildcards or I/O redirects - or anything like that. If you need shell processing of arguments, - write an sh-script wrapper for your authenticator, and put the path - to that here. - - <method> defines how the login and password are passed to the - external authenticator: - environment get args from environment variables. (default) - pipe read newline-terminated strings from stdin. - checkpassword read null-terminated strings from file descriptor 3. - function internal authenticator called as function. - Environment is the default for historical reasons, but it may be - insecure on some versions of Unix. See the README file. - - Examples: - - ** For external authentication programs using environment variables: - - AddExternalAuth archive_auth /usr/local/bin/authcheck - SetExternalAuthMethod archive_auth environment - - ** For external authentication programs using a pipe: - - AddExternalAuth archive_auth /usr/local/bin/authcheck - SetExternalAuthMethod archive_auth pipe - - ** For external authenticators using the checkpassword protocol: - - AddExternalAuth archive_auth "/bin/checkpassword /bin/true" - SetExternalAuthMethod archive_auth checkpassword - - ** For HARDCODE functions with no configuration file: - - AddExternalAuth archive_auth RADIUS: - SetExternalAuthMethod archive_auth function - - ** For HARDCODE functions with a configuration file: - - AddExternalAuth archive_auth RADIUS:/usr/local/raddb - SetExternalAuthMethod archive_auth function - -Step 4: - If you want to use an external program to do group checking, add the - following to your server's httpd.conf. - - AddExternalGroup <keyword> <path-to-authenticator> - - SetExternalGroupMethod <keyword> <method> - - <keyword> is some name you choose to identify this particular - group checking method. The keywords for login authenticators and - group authenticators are separate name spaces, so it doesn't matter - if these keywords match any you defined in step 1. - - <method> defines how the login and group names are passed to the - external authenticator: - environment - authenticator gets data from environment variables. - pipe - authenticator reads data from standard input. - Environment is the default. - - Examples: - - ** For external group check programs using environment variables: - - AddExternalGroup archive_group /usr/local/bin/groupcheck - SetExternalGroupMethod archive_group environment - - ** For external authentication programs using a pipe: - - AddExternalGroup archive_group /usr/local/bin/authcheck - SetExternalGroupMethod archive_group pipe - -Step 5: - For any directory you want to protect, you need either a - .htaccess file in the directory or a <Directory> block for the - directory in your httpd.conf file. - - Note that for .htaccess files to work, you must specify "AllowOverride - AuthConfig" in the httpd.conf file for any directories they appear - under. As distributed, Apache sets "AllowOverride None" for most - directories. If this is not changed, .htaccess files will be ignored. - - For normal user authentication, the following directives should be in - the .htaccess file or <Directory> block: - - AuthType Basic - AuthName <authname> - AuthExternal <keyword> - require valid-user - - Here <authname> identifies what we are authenticating for - it usually - appears in the browser's pop-up login windown. <keyword> matches a - keyword you defined with AddExternalAuth in step 1. - - If you only want some users to have access to the directory, as opposed - to all valid users, you can list the users on the "require" line, - changing it to: - - require user <username1> <username2> ... - - If you want to use the external group check program to allow only - users in a given group to have access, you could do: - - AuthType Basic - AuthName <name you call this type of authentication> - AuthExternal <keyword> - GroupExternal <groupkeyword> - require group <groupname1> <groupname2> ... - - Here <groupkeyword> matches a name you defined with with the - AddExternalGroup command in step 2. - - Mod_auth_external is "authoritative" by default. This means that - if a login/password are not found to be valid by mod_auth_external, - then no other authentication methods will be tried, even if you have - configured them. If you want login/password pairs that failed - authentication to be passed only to other authenticators, then you - should add the directive: - - AuthExternalAuthoritative off - - Of course, if you haven't configured multiple authenticators for the - directory, then you can ignore this. - - See the Apache manual pages on AuthType, AuthName, require, and - AuthGroupFile for more information. - -Step 6: - Install your external authentication program in the location named - by the pathname on your AddExternalAuth directive. - -Step 7: - Restart Apache, so that all the new configuration commands will be - loaded. If you have the apachectl command do: - - apachectl restart - - For Redhat 6.1 which doesn't have apachectl, instead do: - - /etc/rc.d/init.d/httpd restart - -Step 8: - Test your changes/code by trying to view a protected page. - - If it doesn't work, check the apache error logs. Some common - problems: - - - Miscellaneous odd behaviors. - - Did you restart the httpd after the last time you editted the - httpd.conf file or recompiled the program? - - - Apache complains about not recognizing "AddExternalAuth" and - other mod_auth_external commands. - - Either the module didn't get installed (are you running the - newly compiled copy of httpd?), or it isn't enabled (you - may need the AddModule or LoadModule commands described above). - - - It displays pages in a protected directory without asking for - a login and password. - - If you are using .htaccess files, does your httpd.conf file - say "AllowOverride AuthConfig" for the directory? Apache is - distributed with "AllowOverride None" set on the cgi-bin - directory, which will cause .htaccess files to be ignored. - - - Error log says "Failed (-1)". - - Probably means that the module couldn't run the authenticator. - Is the path correct? Is it permitted correctly? Are the - directories it is in permitted correctly? - - - Error log says "Failed" with some other number after it. - - The authenticator ran, and exited with the given non-zero return - code. The authenticator program seems not to be working. |