Update ap-perl to 1.24. Changes from 1.19:

* 'sub handler : method {}' is now treated as a method handler
* variable $Apache::Server::ConfigTestOnly is set to 1 if Apache
  is running in configuration test mode (httpd -t)
* add PerlAddVar directive, like PerlSetVar, but uses ap_table_add
  instead of ap_table_set
* Apache::Table->unset can now be called with an array reference
* Apache::PerlRun::flush_namespace fixes, so aliased (imported)
  code/hash/array/scalar are undefined without undef-ing the pointed-to
  data and without using B.pm, thanks to Richard Chen for the suggestion
* document Apache::print's special behavior wrt references
* fix core dump triggered by <Perl>do 'foo.pl'</Perl>,
* pass $Config{ccflags} to apache for 5.6.0+
* fix Apache->httpd_conf, thanks to Will Trillich for the spot
* fixed 'make clean' to remove FILES => passed to MakeMaker
* add Apache::FILENO method for 5.6.0+ tied filehandle support
  thanks to Richard Titmuss for the spot
* --disable-rule=EXPAT is passed to Apache's configure to avoid
  XML::Parser conflicts
* fix PerlSetVar inheritance bug
* set r->notes("error-notes") to $@ if $@ after a Perl*Handlers is run
* added INSTALL.raven
* $c->remote_ip($ip) now also sets conn->remote_addr to make
  IP-based access control work correctly
* Apache::URI::port wasn't setting the port correctly
* $Apache::Registry::NameWithVirtualHost fix take 2
  (move is_virtual logic from mod_perl.c to Registry.pm)
* added Apache::OPEN method for 5.6.0+ tied filehandle support
* Apache::Table is now loaded by default (if enabled), rather than
  autoloading when first needed
* $r->document_root can now be modified
* upgrade license to apache software license version 1.1
* $r->the_request can now be modified
* warn that dso+Perl malloc needs a Perl built with -Ubincompat5005
* add Apache::BINMODE stub for 5.6.0 tied filehandle support (fixes cgi.t #4)
* add $r->server->loglevel() and relevant constants.
* $Apache::Server::AddPerlVersion uses $^V for Perl/v5.6.0+
* reset the stack pointer after calling perl_require_module() in
  perl_call_handler().  this fix will most likely cure the reports of
  "Can't upgrade that kind of scalar at ..."
* change $Apache::VERSION check to use a string instead of SvNV, which
  was troublesome with Perl 5.6.0
* Apache::src fixup to quiet warnings under Perl 5.004
* Apache::src::apxs fixups to quiet warnings if apxs doesnt exist or
  httpd is not dso enabled
* fix #ifdef SGI_BOOST typo
* proxy support fixed wrt RFC2068
* set Apache::Resource::DEFAULT_RLIMIT_AS (address space) to 64Mb
* Bundle::Apache will now install Bundle::LWP before mod_perl
* support Apache::FakeRequest::args in a list context
* compile fixes for 5.6 + -Duse5005threads
* log to parms->server instead of stderr if PerlRequire fails
* make sure lib/Apache/MyConfig.pm is written before used
* fixup the output of apxs -q CFLAGS to preserve quoting (again)
* removed the generated apaci/mod_perl.config from MANIFEST
* new variable $Apache::Server::StrictPerlSections, if true, will croak
  <Perl> section generates invalid Apache configuration syntax
* new Apache::src->ccflags method to combine $Config{ccflags} and
  apxs -q CFLAGS
* added Apache::src->apxs method
* make use of $Config{shrpenv} to find CORE/libperl.so
* fix Apache::Registry bug when filename starts with a 0
* Apache::Registry will restore $r->status to the original value
* fixup the output of apxs -q CFLAGS to preserve quoting
* dso fix fix: modules with END blocks calling xs code (e.g. DBI) would
  core dump because the xs .dso had been unloaded, now dso's are not
  unloaded until after END blocks are called.
* force environ[] to be copied before any Perl code is loaded
* localize $_ in Apache::send_cgi_header
* fix precedence problem in StatINC.pm
* if hash value has magicalness in <Perl>, invoke FETCH
* sync with 1.3.12's virtual_host section logic for httpd -S + <Perl>
* remove t/httpd symlink during 'make realclean' and when rebuilding
* add Apache::src::otherldflags method
* __THE__ dso fix: dlclose() xs shared objects and call perl_shutdown()
  before mod_perl's libperl.so is unloaded/reloaded by mod_so
* add  /D "_MSWSOCK_" to ApacheModulePerl.dsp
* Apache::RegistryBB returns DECLINED instead of FORBIDDEN if -d $r->finfo
* add Apache::Util::validate_password()
* call (void)perl_request_rec(r) asap, instead of waiting till the
  response phase, e.g. so CGI.pm can be used before PerlHandler, without
  having to call Apache->request($r);
* Apache::perl_hook() fixes for Perl*Api
* save/restore $^W in Apache::PerlRun
* fix Apache::Registry when $r->uri ends with a /
* add virtualhost support to Apache::RegistryLoader
* $Apache::Registry::NameWithVirtualHost fix
* allow Apache::PerlRun::handler to be subclassed
* fix $r->connection->remote_ip for SGI performance patches (#ifdef SGI_BOOST)
* mod_perl.exp is now installed
* pod fixups to avoid WARNING from newer pod2*
* Apache::RedirectLogFix now uses $r->last
* tweaks for sfio
* update Apache::SIG docs
* fix get_set_PVp in mod_perl_xs.h
* tweaks to compile/run with 5.5.670 + -Dusethreads
* $r->hostname now documented
* Apache::File methods are now documented
* avoid quoting <Perl> config if args_how == RAW_ARGS
* PerlPassEnv maintains its value beyond the first request,
* prevent possible core dump in $r->pnotes if get_module_config returns
  NULL
* fix Apache::Status::status_cv_dump for Perl/5.6-dev
* use perl_get_sv("]") instead of patchlevel for $AddPerlVersion
* Apache::Util functions $r->unescape_uri, $r->unescape_uri_info,
  $r->size_string are now documented
* $r->request_time is now documented
* Look for the makepl_args.mod_perl file as .makepl_args.mod_perl in
  ./ and ../ too since the book says it works so.
* PerlRestartHandler is now enabled w/ ALL_HOOKS=1 (or EVERYTHING=1)
* $r->no_cache(1) will now set the r->headers_out "Pragma" and
  "Cache-control" to "no-cache"
* `PerlSetEnv PERL5LIB ...' now works again
* PerlFreshRestart semantics changed to preserve order of PerlModule's
  and not to reload modules while actually iterating over %INC
* $r->current_callback now works properly when PerlHandler invokes
  subrequests
* if an Apache::Table is NULL return undef (e.g. $r->notes during ChildInit)
* ActivePerl compile patches
* document that Apache 1.2.x is no longer supported
* Apache::src now supported with USE_APXS=1
* disable experimental perlrunxs until future notice
* add sanity check for libgdbm
* change PL_siggv usage to gv_fetchpv("SIG", ...) for Perl 5.6-tobe
* document $r->get_handlers, $r->set_handlers, $r->push_handlers
* document PerlSetVar
* document the fact that $r->dir_config handles keys in a
  case insensitive manner
* avoid logging "rwrite returned -1" multiple times in the
  same request
* bugfix in write_client() when running under APACHE_SSL
* document the fact that $r->connection->user can be used to set
  the authenticated user name
* document the fact that $r->uri sets/gets the URI minus the query string,
  not the complete URI
* Apache::RegistryLoader::handler was rewritten to allow a better
  diagnostics of scripts preloading problems.
* document the fact that $r->args can be used to set the query string
  as well as get it
* add $r->connection->fileno, provides the client file descriptors. This
  can be used to detect client disconnect without doing any I/O, e.g. using
  IO::Select
* if $r->bytes_sent has not been calculated, then do so before returning
  the value.
* ensure that all -I directories printed by Apache::src actually exist
* don't assume $uri =~ /$path_info$/ in Apache::Registry/PerlRun
* fix segfault when using Limit in <Perl> sections
* make $c->remote_host writeable
* add per-server PerlSetVar variables, accessed using
  Apache->server->dir_config or $r->server->dir_config.
  $r->dir_config merges them with per-directory variables.
* documentation typo
* add $r->server->uid and $r->server->gid
* add per-server configuration merge
* `_' is no longer escaped in Apache::Registry package names
* fix $ENV{PATH} corruption
* mod_perl_version.h removed from MANIFEST
* preload Apache::Constants::OPT_EXECCGI() for Apache::{Registry,PerlRun}
* Apache::SizeLimit now uses $r->child_terminate instead of Apache::exit(-2)
* get rid of various 5.005_60 warnings
* add Status{Terse,TerseSize,Deparse,Fathom,OptionsAll} options to
  Apache::Status
* adjust mod_perl.h for 5.005_59 perl_eval_{pv,sv} rename
* fix flush_namespace undef logic in Apache::PerlRun
* Tweak Apache::content to comply with media-types embedded in content-types
  (RFC 2616 section 3.7)
* Removed and added a few modules from the Bundle file.
* Renamed the Apache::StatINC parameters to StatINC_<something>. Changed
  StatINC_Debug to take a number as parameter instead of "on" to support
  "debug levels"
* fix refcount bug in %VirtualHost [] values
* $r->read will now properly check the return value of
  ap_setup_client_block() and return undef if != OK,
  e.g. if LimitRequestBody is exceeded
* fix bug in register_cleanup()
* added StatusLexInfo option to Apache::Status
* turn off warnings in Apache::Status::as_HTML symdump code
* tweak Apache::RegistryNG so it works with virtual includes
* change Apache::File->tmpfile flags from O_WRONLY to O_RDWR
* fix Apache::RegistryBB when $r->filename NOT_FOUND
* cygwin port
* Documented $r->pnotes
* Change "setting auth_name" trace message so we don't get it without
  having enabled a MOD_PERL_TRACE level
* s/class/pclass/g so we can compile w/ c++
* mod_perl will now save/restore SIGALRM
* fix Apache::Status bug prototype check of 'use constant' subs
* added set_byterange() and each_byterange() methods
* added proper support for {Location,Directory,Files}Match in <Perl> sections
* rework PerlFreshRestart to avoid core dump triggered w/ 5.005_03
* fix $Apache::Server::Starting under dso
* use ap_bfileno() instead of r->connnection->client->fd directly
* fix possible overwrite in perlio.c:sfapacheread() #ifdef USE_SFIO
* dont use DEFAULT_PATH if r->subprocess_env->{PATH} is already set
* ensure perl_setup_env() is called just once per-request
* :common Apache::Constants are compiled at bootstrap time, so CVs are
  shared and AUTOLOAD is avoided, which was known to cause a spin
  while loading SERVER_ERROR for particular Perl errors
* <Perl> sections now use 1.3.7-dev's cmd_parms->context to cure many
  known, old bugs, e.g. @DirectoryIndex outside of %Location, .htaccess
  and many more
* fix bug where top-level PerlSetEnv's would be lost after 1st request
* fix bug in Apache::ModuleConfig->get
* fix rwrite error message
* Change Apache::SizeLimit so that it supports Solaris 2.6 and above
* Fixed apaci/load_modules.pl.PL to properly fixup log_agent and
  log_referer when loaded as DSOs.

2 files changed, 10 insertions, 10 deletions

diff --git a/www/ap-perl/Makefile b/www/ap-perl/Makefile
index 8f18e63a1ab..acf0567512a 100644
--- a/www/ap-perl/Makefile
+++ b/www/ap-perl/Makefile
@@ -1,16 +1,17 @@
-# $NetBSD: Makefile,v 1.8 2000/08/27 10:37:04 jlam Exp $
+# $NetBSD: Makefile,v 1.9 2000/08/27 22:40:36 jlam Exp $
 #
 
-DISTNAME=       	mod_perl-1.19
-PKGNAME=        	ap-perl-1.19
+DISTNAME=		mod_perl-1.24
+PKGNAME=		ap-perl-1.24
 CATEGORIES=		www perl5
-MASTER_SITES=		${MASTER_SITE_PERL_CPAN:=Apache/}
+MASTER_SITES=		${MASTER_SITE_PERL_CPAN:=Apache/} \
+			http://perl.apache.org/dist/
 
-MAINTAINER=		tv@netbsd.org
+MAINTAINER=		packages@netbsd.org
 HOMEPAGE=		http://perl.apache.org/
 
 DEPENDS+=		libperl-5.*:../../lang/libperl
-DEPENDS+=		apache-1.3.*:../../www/apache
+DEPENDS+=		apache{,6}-1.3.*:../../www/apache
 
 USE_PERL5=		# defined
 PERL5_PACKLIST=		${PERL5_SITEARCH}/auto/mod_perl/.packlist
@@ -20,8 +21,7 @@ MAKE_PARAMS+=		WITH_APXS=${PREFIX}/sbin/apxs
 MAKE_PARAMS+=		EVERYTHING=1
 
 do-configure:
-	@cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} \
-		${PERL5} Makefile.PL ${MAKE_PARAMS}
+	@cd ${WRKSRC}; ${SETENV} ${MAKE_ENV} ${PERL5} Makefile.PL ${MAKE_PARAMS}
 
 post-install:
 	${INSTALL_DATA} ${WRKSRC}/htdocs/manual/mod/mod_perl.html \
diff --git a/www/ap-perl/files/md5 b/www/ap-perl/files/md5
index a7d7a0d61f1..2b111c4be1b 100644
--- a/www/ap-perl/files/md5
+++ b/www/ap-perl/files/md5
@@ -1,3 +1,3 @@
-$NetBSD: md5,v 1.2 1999/04/30 17:05:21 tv Exp $
+$NetBSD: md5,v 1.3 2000/08/27 22:40:37 jlam Exp $
 
-MD5 (mod_perl-1.19.tar.gz) = 721fe5245aefdffecf5f54a9c29c5938
+MD5 (mod_perl-1.24.tar.gz) = 08d0ac4c9e2436fdb038021ae8826a8c