Update to 7.0.23, based on Makoto Fujiwara's update to 7.0.23 in PR 45465.

I've reduced the patch to configure further.

7.0.23:
This release continues our documentation improvements, defines new keysyms
needed for input of various langugages, and fixes a couple compliation errors
in software that includes these headers when building either in C89 mode
(without C99 varargs macros) or in the Cygwin environment.

7.0.22:
This release provides a number of documentation improvements, a few new
macros and new keysyms.

7.0.21:
This release contains the addition of Sinhala Unicode keysysm and a
couple of compiler fixes and additions.

7.0.20:
This release provides two code changes - an additional #include <sys/types.h>
on Solaris machines to fix build issues in the X server, and the addition of
new XF86XK_TouchpadOn & XF86XK_TouchpadOff keysyms to the keysym definition
headers.

It also now includes the definitions of the ServerInterpreted families of
addresses that have been registered for use with the xhost +si:* syntax,
that were previously found in the xorg-docs module, since the X11 Protocol
spec defines the ServerInterpreted method and provides for those definitions.

The rest of the changes are further refinements of the DocBook/XML conversion
of the protocol spec which was introduced in xproto 7.0.19.   The HTML & PDF
versions should both feature greatly improved internal hyperlinking to allow
easier navigation and following of references between the interconnected
requests and events in the spec.   The conversion of the documentation is a
work in progress, and we appreciate all proof-reading to find errors (this
release fixes a couple spots where nroff markup didn't get properly converted
and appeared in the resulting text) as well as feedback on formatting or other
changes that would make the documentation more useful to developers.  Of course,
we are being very careful to not change the actual formal specification of the
protocol in these changes, just the formatting and usability.

7.0.19:
No code nor headers were changed in this release - this solely consists
of the move of the X11 Protocol specification from xorg-docs to this
module, and it's conversion from troff to DocBook XML by Matt Dew
(with some followup markup massaging by yours truly).  There is of course
still room for improvement as there are over a hundred pages to be proofread
 - patches accepted if you see ways to make the output better.

The standard xorg-macros options are provided in configure to control
the generation of text, html, postscript, and/or pdf versions of the
documents from the XML sources, via the xmlto frontend and it's associated
backends such as fop.

8 files changed, 187 insertions, 6478 deletions

diff --git a/x11/xproto/Makefile b/x11/xproto/Makefile
index bf7985b4adf..31f228f4cb0 100644
--- a/x11/xproto/Makefile
+++ b/x11/xproto/Makefile
@@ -1,8 +1,7 @@
-# $NetBSD: Makefile,v 1.18 2012/03/19 19:08:36 bsiegert Exp $
+# $NetBSD: Makefile,v 1.19 2012/06/03 19:57:33 wiz Exp $
 #
 
-DISTNAME=		xproto-7.0.18
-PKGREVISION=		1
+DISTNAME=		xproto-7.0.23
 CATEGORIES=		x11 devel
 MASTER_SITES=		${MASTER_SITE_XORG:=proto/}
 EXTRACT_SUFX=		.tar.bz2
diff --git a/x11/xproto/PLIST b/x11/xproto/PLIST
index 9b36abf189f..41c951766f2 100644
--- a/x11/xproto/PLIST
+++ b/x11/xproto/PLIST
@@ -1,4 +1,4 @@
-@comment $NetBSD: PLIST,v 1.2 2009/06/14 18:25:18 joerg Exp $
+@comment $NetBSD: PLIST,v 1.3 2012/06/03 19:57:33 wiz Exp $
 include/X11/DECkeysym.h
 include/X11/HPkeysym.h
 include/X11/Sunkeysym.h
@@ -26,3 +26,8 @@ include/X11/ap_keysym.h
 include/X11/keysym.h
 include/X11/keysymdef.h
 lib/pkgconfig/xproto.pc
+share/doc/xproto/encoding.xml
+share/doc/xproto/glossary.xml
+share/doc/xproto/keysyms.xml
+share/doc/xproto/sect1-9.xml
+share/doc/xproto/x11protocol.xml
diff --git a/x11/xproto/distinfo b/x11/xproto/distinfo
index d110ea681f2..e01f6a1cb28 100644
--- a/x11/xproto/distinfo
+++ b/x11/xproto/distinfo
@@ -1,9 +1,9 @@
-$NetBSD: distinfo,v 1.17 2012/03/19 19:08:36 bsiegert Exp $
+$NetBSD: distinfo,v 1.18 2012/06/03 19:57:33 wiz Exp $
 
-SHA1 (xproto-7.0.18.tar.bz2) = 252596e7264f3174d535bf67fd1b704b1ba8f699
-RMD160 (xproto-7.0.18.tar.bz2) = 526f579590bc7dadbd3967d4e8ac5f174e80c6ac
-Size (xproto-7.0.18.tar.bz2) = 168722 bytes
-SHA1 (patch-aa) = f226150c2c23fd3c4f870dd0bcd9704ade6496aa
-SHA1 (patch-ab) = 7ef921ce34ab8ba5de1ea9edfd32034db079c0ea
-SHA1 (patch-ac) = d4d90d2eca33a75e55db463b48a29abecc67eab9
-SHA1 (patch-ad) = 97331290a7c7ee26896c4f6da74ee2b601a93eda
+SHA1 (xproto-7.0.23.tar.bz2) = 5d7f00d1dbe6cf8e725841ef663f0ee2491ba5b2
+RMD160 (xproto-7.0.23.tar.bz2) = b4077227a012c90cbcab8b6e7a289931b2ee6efb
+Size (xproto-7.0.23.tar.bz2) = 290114 bytes
+SHA1 (patch-aa) = 22cfcde47f2139c685286e97968bfc0c708e1fea
+SHA1 (patch-ab) = 9327483e9a48b8715cd212c84dfa3f9e120bbb7f
+SHA1 (patch-ad) = e3b9accae71161c7ba9de8527b18e1c0dcdc1e6a
+SHA1 (patch-configure) = 9656a03001a26a8853dc21a37c8b3ae25a8562ad
diff --git a/x11/xproto/patches/patch-aa b/x11/xproto/patches/patch-aa
index 24206223702..3b7798712ee 100644
--- a/x11/xproto/patches/patch-aa
+++ b/x11/xproto/patches/patch-aa
@@ -1,6 +1,6 @@
-$NetBSD: patch-aa,v 1.7 2012/03/19 19:08:37 bsiegert Exp $
+$NetBSD: patch-aa,v 1.8 2012/06/03 19:57:33 wiz Exp $
 
---- Xos_r.h.in.orig	2010-08-10 14:18:54.000000000 +0000
+--- Xos_r.h.in.orig	2012-03-16 06:11:44.000000000 +0000
 +++ Xos_r.h.in
 @@ -73,13 +73,7 @@ in this Software without prior written a
  # include <X11/Xfuncs.h>
diff --git a/x11/xproto/patches/patch-ab b/x11/xproto/patches/patch-ab
index 87afb584463..eac8b2c50f2 100644
--- a/x11/xproto/patches/patch-ab
+++ b/x11/xproto/patches/patch-ab
@@ -1,8 +1,9 @@
-$NetBSD: patch-ab,v 1.4 2010/09/10 20:07:29 joerg Exp $
+$NetBSD: patch-ab,v 1.5 2012/06/03 19:57:33 wiz Exp $
 
---- configure.ac.orig	2010-08-10 14:19:17.000000000 +0000
+
+--- configure.ac.orig	2012-03-16 06:11:44.000000000 +0000
 +++ configure.ac
-@@ -11,6 +11,7 @@ XORG_DEFAULT_OPTIONS
+@@ -17,6 +17,7 @@ XORG_CHECK_SGML_DOCTOOLS(1.8)
  
  AC_CONFIG_HEADER([do-not-use-config.h])
  AC_CONFIG_HEADER([Xfuncproto.h])
@@ -10,7 +11,7 @@ $NetBSD: patch-ab,v 1.4 2010/09/10 20:07:29 joerg Exp $
  
  AC_CANONICAL_HOST
  
-@@ -203,6 +204,14 @@ if test "x$WIDEPROTO" = xno; then
+@@ -209,6 +210,14 @@ if test "x$WIDEPROTO" = xno; then
  	AC_DEFINE(NARROWPROTO, [], [Narrow prototypes])
  fi
  
@@ -24,4 +25,4 @@ $NetBSD: patch-ab,v 1.4 2010/09/10 20:07:29 joerg Exp $
 +AC_CHECK_FUNC(ttyname_r, [AC_DEFINE(_XOS_R_H_MTSAFE_UNISTDAPI,[],[Assume has ttyname_r and friends from unistd.h])],)
  
  AC_OUTPUT([Makefile
-            Xpoll.h
+            specs/Makefile
diff --git a/x11/xproto/patches/patch-ac b/x11/xproto/patches/patch-ac
deleted file mode 100644
index adb909b01fb..00000000000
--- a/x11/xproto/patches/patch-ac
+++ /dev/null
@@ -1,6455 +0,0 @@
-$NetBSD: patch-ac,v 1.4 2010/09/10 20:07:29 joerg Exp $
-
---- configure.orig	2010-08-10 14:19:23.000000000 +0000
-+++ configure
-@@ -1,20 +1,24 @@
- #! /bin/sh
- # Guess values for system-dependent variables and create Makefiles.
--# Generated by GNU Autoconf 2.63 for Xproto 7.0.18.
-+# Generated by GNU Autoconf 2.65 for Xproto 7.0.18.
- #
- # Report bugs to <https://bugs.freedesktop.org/enter_bug.cgi?product=xorg>.
- #
-+#
- # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
--# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
-+# Inc.
-+#
-+#
- # This configure script is free software; the Free Software Foundation
- # gives unlimited permission to copy, distribute and modify it.
--## --------------------- ##
--## M4sh Initialization.  ##
--## --------------------- ##
-+## -------------------- ##
-+## M4sh Initialization. ##
-+## -------------------- ##
- 
- # Be more Bourne compatible
- DUALCASE=1; export DUALCASE # for MKS sh
--if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
-   emulate sh
-   NULLCMD=:
-   # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-@@ -22,23 +26,15 @@ if test -n "${ZSH_VERSION+set}" && (emul
-   alias -g '${1+"$@"}'='"$@"'
-   setopt NO_GLOB_SUBST
- else
--  case `(set -o) 2>/dev/null` in
--  *posix*) set -o posix ;;
-+  case `(set -o) 2>/dev/null` in #(
-+  *posix*) :
-+    set -o posix ;; #(
-+  *) :
-+     ;;
- esac
--
- fi
- 
- 
--
--
--# PATH needs CR
--# Avoid depending upon Character Ranges.
--as_cr_letters='abcdefghijklmnopqrstuvwxyz'
--as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
--as_cr_Letters=$as_cr_letters$as_cr_LETTERS
--as_cr_digits='0123456789'
--as_cr_alnum=$as_cr_Letters$as_cr_digits
--
- as_nl='
- '
- export as_nl
-@@ -46,7 +42,13 @@ export as_nl
- as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
- as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
- as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
--if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-+# Prefer a ksh shell builtin over an external printf program on Solaris,
-+# but without wasting forks for bash or zsh.
-+if test -z "$BASH_VERSION$ZSH_VERSION" \
-+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
-+  as_echo='print -r --'
-+  as_echo_n='print -rn --'
-+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-   as_echo='printf %s\n'
-   as_echo_n='printf %s'
- else
-@@ -57,7 +59,7 @@ else
-     as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-     as_echo_n_body='eval
-       arg=$1;
--      case $arg in
-+      case $arg in #(
-       *"$as_nl"*)
- 	expr "X$arg" : "X\\(.*\\)$as_nl";
- 	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-@@ -80,13 +82,6 @@ if test "${PATH_SEPARATOR+set}" != set; 
-   }
- fi
- 
--# Support unset when possible.
--if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
--  as_unset=unset
--else
--  as_unset=false
--fi
--
- 
- # IFS
- # We need space, tab and new line, in precisely that order.  Quoting is
-@@ -96,15 +91,15 @@ fi
- IFS=" ""	$as_nl"
- 
- # Find who we are.  Look in the path if we contain no directory separator.
--case $0 in
-+case $0 in #((
-   *[\\/]* ) as_myself=$0 ;;
-   *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
--  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
--done
-+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+  done
- IFS=$as_save_IFS
- 
-      ;;
-@@ -116,12 +111,16 @@ if test "x$as_myself" = x; then
- fi
- if test ! -f "$as_myself"; then
-   $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
--  { (exit 1); exit 1; }
-+  exit 1
- fi
- 
--# Work around bugs in pre-3.0 UWIN ksh.
--for as_var in ENV MAIL MAILPATH
--do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+# Unset variables that we do not need and which cause bugs (e.g. in
-+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
-+# suppresses any "Segmentation fault" message there.  '((' could
-+# trigger a bug in pdksh 5.2.14.
-+for as_var in BASH_ENV ENV MAIL MAILPATH
-+do eval test x\${$as_var+set} = xset \
-+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
- done
- PS1='$ '
- PS2='> '
-@@ -133,330 +132,301 @@ export LC_ALL
- LANGUAGE=C
- export LANGUAGE
- 
--# Required to use basename.
--if expr a : '\(a\)' >/dev/null 2>&1 &&
--   test "X`expr 00001 : '.*\(...\)'`" = X001; then
--  as_expr=expr
--else
--  as_expr=false
--fi
--
--if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
--  as_basename=basename
--else
--  as_basename=false
--fi
--
--
--# Name of the executable.
--as_me=`$as_basename -- "$0" ||
--$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
--	 X"$0" : 'X\(//\)$' \| \
--	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
--$as_echo X/"$0" |
--    sed '/^.*\/\([^/][^/]*\)\/*$/{
--	    s//\1/
--	    q
--	  }
--	  /^X\/\(\/\/\)$/{
--	    s//\1/
--	    q
--	  }
--	  /^X\/\(\/\).*/{
--	    s//\1/
--	    q
--	  }
--	  s/.*/./; q'`
--
- # CDPATH.
--$as_unset CDPATH
--
-+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
- 
- if test "x$CONFIG_SHELL" = x; then
--  if (eval ":") 2>/dev/null; then
--  as_have_required=yes
-+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
-+  emulate sh
-+  NULLCMD=:
-+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
-+  # is contrary to our usage.  Disable this feature.
-+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
-+  setopt NO_GLOB_SUBST
- else
--  as_have_required=no
-+  case \`(set -o) 2>/dev/null\` in #(
-+  *posix*) :
-+    set -o posix ;; #(
-+  *) :
-+     ;;
-+esac
- fi
--
--  if test $as_have_required = yes &&	 (eval ":
--(as_func_return () {
--  (exit \$1)
--}
--as_func_success () {
--  as_func_return 0
--}
--as_func_failure () {
--  as_func_return 1
--}
--as_func_ret_success () {
--  return 0
--}
--as_func_ret_failure () {
--  return 1
--}
-+"
-+  as_required="as_fn_return () { (exit \$1); }
-+as_fn_success () { as_fn_return 0; }
-+as_fn_failure () { as_fn_return 1; }
-+as_fn_ret_success () { return 0; }
-+as_fn_ret_failure () { return 1; }
- 
- exitcode=0
--if as_func_success; then
--  :
--else
--  exitcode=1
--  echo as_func_success failed.
--fi
--
--if as_func_failure; then
--  exitcode=1
--  echo as_func_failure succeeded.
--fi
--
--if as_func_ret_success; then
--  :
-+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
-+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
-+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
-+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
-+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
-+
-+else
-+  exitcode=1; echo positional parameters were not saved.
-+fi
-+test x\$exitcode = x0 || exit 1"
-+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
-+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
-+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
-+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
-+test \$(( 1 + 1 )) = 2 || exit 1"
-+  if (eval "$as_required") 2>/dev/null; then :
-+  as_have_required=yes
- else
--  exitcode=1
--  echo as_func_ret_success failed.
--fi
--
--if as_func_ret_failure; then
--  exitcode=1
--  echo as_func_ret_failure succeeded.
-+  as_have_required=no
- fi
-+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
- 
--if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
--  :
- else
--  exitcode=1
--  echo positional parameters were not saved.
--fi
--
--test \$exitcode = 0) || { (exit 1); exit 1; }
--
--(
--  as_lineno_1=\$LINENO
--  as_lineno_2=\$LINENO
--  test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
--  test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
--") 2> /dev/null; then
--  :
--else
--  as_candidate_shells=
--    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+as_found=false
- for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
--  case $as_dir in
-+  as_found=:
-+  case $as_dir in #(
- 	 /*)
- 	   for as_base in sh bash ksh sh5; do
--	     as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
-+	     # Try only shells that exist, to save several forks.
-+	     as_shell=$as_dir/$as_base
-+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
-+  CONFIG_SHELL=$as_shell as_have_required=yes
-+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
-+  break 2
-+fi
-+fi
- 	   done;;
-        esac
-+  as_found=false
- done
-+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
-+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
-+  CONFIG_SHELL=$SHELL as_have_required=yes
-+fi; }
- IFS=$as_save_IFS
- 
- 
--      for as_shell in $as_candidate_shells $SHELL; do
--	 # Try only shells that exist, to save several forks.
--	 if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
--		{ ("$as_shell") 2> /dev/null <<\_ASEOF
--if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
--  emulate sh
--  NULLCMD=:
--  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
--  # is contrary to our usage.  Disable this feature.
--  alias -g '${1+"$@"}'='"$@"'
--  setopt NO_GLOB_SUBST
--else
--  case `(set -o) 2>/dev/null` in
--  *posix*) set -o posix ;;
--esac
--
--fi
--
--
--:
--_ASEOF
--}; then
--  CONFIG_SHELL=$as_shell
--	       as_have_required=yes
--	       if { "$as_shell" 2> /dev/null <<\_ASEOF
--if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
--  emulate sh
--  NULLCMD=:
--  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
--  # is contrary to our usage.  Disable this feature.
--  alias -g '${1+"$@"}'='"$@"'
--  setopt NO_GLOB_SUBST
--else
--  case `(set -o) 2>/dev/null` in
--  *posix*) set -o posix ;;
--esac
--
--fi
--
--
--:
--(as_func_return () {
--  (exit $1)
--}
--as_func_success () {
--  as_func_return 0
--}
--as_func_failure () {
--  as_func_return 1
--}
--as_func_ret_success () {
--  return 0
--}
--as_func_ret_failure () {
--  return 1
--}
--
--exitcode=0
--if as_func_success; then
--  :
--else
--  exitcode=1
--  echo as_func_success failed.
--fi
--
--if as_func_failure; then
--  exitcode=1
--  echo as_func_failure succeeded.
--fi
--
--if as_func_ret_success; then
--  :
--else
--  exitcode=1
--  echo as_func_ret_success failed.
--fi
--
--if as_func_ret_failure; then
--  exitcode=1
--  echo as_func_ret_failure succeeded.
-+      if test "x$CONFIG_SHELL" != x; then :
-+  # We cannot yet assume a decent shell, so we have to provide a
-+	# neutralization value for shells without unset; and this also
-+	# works around shells that cannot unset nonexistent variables.
-+	BASH_ENV=/dev/null
-+	ENV=/dev/null
-+	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-+	export CONFIG_SHELL
-+	exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
- fi
- 
--if ( set x; as_func_ret_success y && test x = "$1" ); then
--  :
--else
--  exitcode=1
--  echo positional parameters were not saved.
-+    if test x$as_have_required = xno; then :
-+  $as_echo "$0: This script requires a shell more modern than all"
-+  $as_echo "$0: the shells that I found on your system."
-+  if test x${ZSH_VERSION+set} = xset ; then
-+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
-+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
-+  else
-+    $as_echo "$0: Please tell bug-autoconf@gnu.org and
-+$0: https://bugs.freedesktop.org/enter_bug.cgi?product=xorg
-+$0: about your system, including any error possibly output
-+$0: before this message. Then install a modern shell, or
-+$0: manually run the script under such a shell if you do
-+$0: have one."
-+  fi
-+  exit 1
- fi
--
--test $exitcode = 0) || { (exit 1); exit 1; }
--
--(
--  as_lineno_1=$LINENO
--  as_lineno_2=$LINENO
--  test "x$as_lineno_1" != "x$as_lineno_2" &&
--  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
--
--_ASEOF
--}; then
--  break
- fi
--
- fi
-+SHELL=${CONFIG_SHELL-/bin/sh}
-+export SHELL
-+# Unset more variables known to interfere with behavior of common tools.
-+CLICOLOR_FORCE= GREP_OPTIONS=
-+unset CLICOLOR_FORCE GREP_OPTIONS
- 
--      done
--
--      if test "x$CONFIG_SHELL" != x; then
--  for as_var in BASH_ENV ENV
--	do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
--	done
--	export CONFIG_SHELL
--	exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
--fi
-+## --------------------- ##
-+## M4sh Shell Functions. ##
-+## --------------------- ##
-+# as_fn_unset VAR
-+# ---------------
-+# Portably unset VAR.
-+as_fn_unset ()
-+{
-+  { eval $1=; unset $1;}
-+}
-+as_unset=as_fn_unset
- 
-+# as_fn_set_status STATUS
-+# -----------------------
-+# Set $? to STATUS, without forking.
-+as_fn_set_status ()
-+{
-+  return $1
-+} # as_fn_set_status
- 
--    if test $as_have_required = no; then
--  echo This script requires a shell more modern than all the
--      echo shells that I found on your system.  Please install a
--      echo modern shell, or manually run the script under such a
--      echo shell if you do have one.
--      { (exit 1); exit 1; }
--fi
-+# as_fn_exit STATUS
-+# -----------------
-+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-+as_fn_exit ()
-+{
-+  set +e
-+  as_fn_set_status $1
-+  exit $1
-+} # as_fn_exit
-+
-+# as_fn_mkdir_p
-+# -------------
-+# Create "$as_dir" as a directory, including parents if necessary.
-+as_fn_mkdir_p ()
-+{
- 
-+  case $as_dir in #(
-+  -*) as_dir=./$as_dir;;
-+  esac
-+  test -d "$as_dir" || eval $as_mkdir_p || {
-+    as_dirs=
-+    while :; do
-+      case $as_dir in #(
-+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-+      *) as_qdir=$as_dir;;
-+      esac
-+      as_dirs="'$as_qdir' $as_dirs"
-+      as_dir=`$as_dirname -- "$as_dir" ||
-+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+	 X"$as_dir" : 'X\(//\)[^/]' \| \
-+	 X"$as_dir" : 'X\(//\)$' \| \
-+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-+$as_echo X"$as_dir" |
-+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)[^/].*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\).*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  s/.*/./; q'`
-+      test -d "$as_dir" && break
-+    done
-+    test -z "$as_dirs" || eval "mkdir $as_dirs"
-+  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
- 
--fi
- 
--fi
-+} # as_fn_mkdir_p
-+# as_fn_append VAR VALUE
-+# ----------------------
-+# Append the text in VALUE to the end of the definition contained in VAR. Take
-+# advantage of any shell optimizations that allow amortized linear growth over
-+# repeated appends, instead of the typical quadratic growth present in naive
-+# implementations.
-+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
-+  eval 'as_fn_append ()
-+  {
-+    eval $1+=\$2
-+  }'
-+else
-+  as_fn_append ()
-+  {
-+    eval $1=\$$1\$2
-+  }
-+fi # as_fn_append
- 
-+# as_fn_arith ARG...
-+# ------------------
-+# Perform arithmetic evaluation on the ARGs, and store the result in the
-+# global $as_val. Take advantage of shells that can avoid forks. The arguments
-+# must be portable across $(()) and expr.
-+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
-+  eval 'as_fn_arith ()
-+  {
-+    as_val=$(( $* ))
-+  }'
-+else
-+  as_fn_arith ()
-+  {
-+    as_val=`expr "$@" || test $? -eq 1`
-+  }
-+fi # as_fn_arith
- 
- 
--(eval "as_func_return () {
--  (exit \$1)
--}
--as_func_success () {
--  as_func_return 0
--}
--as_func_failure () {
--  as_func_return 1
--}
--as_func_ret_success () {
--  return 0
--}
--as_func_ret_failure () {
--  return 1
--}
-+# as_fn_error ERROR [LINENO LOG_FD]
-+# ---------------------------------
-+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-+# script with status $?, using 1 if that was 0.
-+as_fn_error ()
-+{
-+  as_status=$?; test $as_status -eq 0 && as_status=1
-+  if test "$3"; then
-+    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
-+  fi
-+  $as_echo "$as_me: error: $1" >&2
-+  as_fn_exit $as_status
-+} # as_fn_error
- 
--exitcode=0
--if as_func_success; then
--  :
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-+  as_expr=expr
- else
--  exitcode=1
--  echo as_func_success failed.
--fi
--
--if as_func_failure; then
--  exitcode=1
--  echo as_func_failure succeeded.
-+  as_expr=false
- fi
- 
--if as_func_ret_success; then
--  :
-+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-+  as_basename=basename
- else
--  exitcode=1
--  echo as_func_ret_success failed.
--fi
--
--if as_func_ret_failure; then
--  exitcode=1
--  echo as_func_ret_failure succeeded.
-+  as_basename=false
- fi
- 
--if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
--  :
-+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-+  as_dirname=dirname
- else
--  exitcode=1
--  echo positional parameters were not saved.
-+  as_dirname=false
- fi
- 
--test \$exitcode = 0") || {
--  echo No shell found that supports shell functions.
--  echo Please tell bug-autoconf@gnu.org about your system,
--  echo including any error possibly output before this message.
--  echo This can help us improve future autoconf versions.
--  echo Configuration will now proceed without shell functions.
--}
-+as_me=`$as_basename -- "$0" ||
-+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-+	 X"$0" : 'X\(//\)$' \| \
-+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-+$as_echo X/"$0" |
-+    sed '/^.*\/\([^/][^/]*\)\/*$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\/\(\/\/\)$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\/\(\/\).*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  s/.*/./; q'`
- 
-+# Avoid depending upon Character Ranges.
-+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-+as_cr_digits='0123456789'
-+as_cr_alnum=$as_cr_Letters$as_cr_digits
- 
- 
--  as_lineno_1=$LINENO
--  as_lineno_2=$LINENO
--  test "x$as_lineno_1" != "x$as_lineno_2" &&
--  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
--
--  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
--  # uniformly replaced by the line number.  The first 'sed' inserts a
--  # line-number line after each line using $LINENO; the second 'sed'
--  # does the real work.  The second script uses 'N' to pair each
--  # line-number line with the line containing $LINENO, and appends
--  # trailing '-' during substitution so that $LINENO is not a special
--  # case at line end.
--  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
--  # scripts with optimization help from Paolo Bonzini.  Blame Lee
--  # E. McMahon (1931-1989) for sed's syntax.  :-)
-+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
-+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
-+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
-+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
-+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
-   sed -n '
-     p
-     /[$]LINENO/=
-@@ -473,8 +443,7 @@ test \$exitcode = 0") || {
-       s/-\n.*//
-     ' >$as_me.lineno &&
-   chmod +x "$as_me.lineno" ||
--    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
--   { (exit 1); exit 1; }; }
-+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
- 
-   # Don't try to exec as it changes $[0], causing all sort of problems
-   # (the dirname of $[0] is not the place where we might find the
-@@ -484,29 +453,18 @@ test \$exitcode = 0") || {
-   exit
- }
- 
--
--if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
--  as_dirname=dirname
--else
--  as_dirname=false
--fi
--
- ECHO_C= ECHO_N= ECHO_T=
--case `echo -n x` in
-+case `echo -n x` in #(((((
- -n*)
--  case `echo 'x\c'` in
-+  case `echo 'xy\c'` in
-   *c*) ECHO_T='	';;	# ECHO_T is single tab character.
--  *)   ECHO_C='\c';;
-+  xy)  ECHO_C='\c';;
-+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
-+       ECHO_T='	';;
-   esac;;
- *)
-   ECHO_N='-n';;
- esac
--if expr a : '\(a\)' >/dev/null 2>&1 &&
--   test "X`expr 00001 : '.*\(...\)'`" = X001; then
--  as_expr=expr
--else
--  as_expr=false
--fi
- 
- rm -f conf$$ conf$$.exe conf$$.file
- if test -d conf$$.dir; then
-@@ -536,7 +494,7 @@ rm -f conf$$ conf$$.exe conf$$.dir/conf$
- rmdir conf$$.dir 2>/dev/null
- 
- if mkdir -p . 2>/dev/null; then
--  as_mkdir_p=:
-+  as_mkdir_p='mkdir -p "$as_dir"'
- else
-   test -d ./-p && rmdir ./-p
-   as_mkdir_p=false
-@@ -555,10 +513,10 @@ else
-       if test -d "$1"; then
- 	test -d "$1/.";
-       else
--	case $1 in
-+	case $1 in #(
- 	-*)set "./$1";;
- 	esac;
--	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
-+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
- 	???[sx]*):;;*)false;;esac;fi
-     '\'' sh
-   '
-@@ -572,8 +530,8 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P
- as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
- 
- 
--
--exec 7<&0 </dev/null 6>&1
-+test -n "$DJDIR" || exec 7<&0 </dev/null
-+exec 6>&1
- 
- # Name of the host.
- # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-@@ -591,7 +549,6 @@ cross_compiling=no
- subdirs=
- MFLAGS=
- MAKEFLAGS=
--SHELL=${CONFIG_SHELL-/bin/sh}
- 
- # Identity of this package.
- PACKAGE_NAME='Xproto'
-@@ -599,6 +556,7 @@ PACKAGE_TARNAME='xproto'
- PACKAGE_VERSION='7.0.18'
- PACKAGE_STRING='Xproto 7.0.18'
- PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg'
-+PACKAGE_URL=''
- 
- # Factoring default headers for most tests.
- ac_includes_default="\
-@@ -643,8 +601,6 @@ LIBOBJS
- USE_FDS_BITS
- AM_BACKSLASH
- AM_DEFAULT_VERBOSITY
--MAN_SUBSTS
--XORG_MAN_PAGE
- ADMIN_MAN_DIR
- DRIVER_MAN_DIR
- MISC_MAN_DIR
-@@ -657,7 +613,6 @@ MISC_MAN_SUFFIX
- FILE_MAN_SUFFIX
- LIB_MAN_SUFFIX
- APP_MAN_SUFFIX
--SED
- host_os
- host_vendor
- host_cpu
-@@ -745,6 +700,7 @@ bindir
- program_transform_name
- prefix
- exec_prefix
-+PACKAGE_URL
- PACKAGE_BUGREPORT
- PACKAGE_STRING
- PACKAGE_VERSION
-@@ -758,6 +714,7 @@ enable_option_checking
- enable_maintainer_mode
- enable_dependency_tracking
- enable_strict_compilation
-+with_release_version
- enable_silent_rules
- enable_function_prototypes
- enable_varargs_prototypes
-@@ -883,8 +840,7 @@ do
-     ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
-     # Reject names that are not valid shell variable names.
-     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
--      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
--   { (exit 1); exit 1; }; }
-+      as_fn_error "invalid feature name: $ac_useropt"
-     ac_useropt_orig=$ac_useropt
-     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-     case $ac_user_opts in
-@@ -910,8 +866,7 @@ do
-     ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
-     # Reject names that are not valid shell variable names.
-     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
--      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
--   { (exit 1); exit 1; }; }
-+      as_fn_error "invalid feature name: $ac_useropt"
-     ac_useropt_orig=$ac_useropt
-     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-     case $ac_user_opts in
-@@ -1115,8 +1070,7 @@ do
-     ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
-     # Reject names that are not valid shell variable names.
-     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
--      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
--   { (exit 1); exit 1; }; }
-+      as_fn_error "invalid package name: $ac_useropt"
-     ac_useropt_orig=$ac_useropt
-     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-     case $ac_user_opts in
-@@ -1132,8 +1086,7 @@ do
-     ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
-     # Reject names that are not valid shell variable names.
-     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
--      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
--   { (exit 1); exit 1; }; }
-+      as_fn_error "invalid package name: $ac_useropt"
-     ac_useropt_orig=$ac_useropt
-     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-     case $ac_user_opts in
-@@ -1163,17 +1116,17 @@ do
-   | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-     x_libraries=$ac_optarg ;;
- 
--  -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
--Try \`$0 --help' for more information." >&2
--   { (exit 1); exit 1; }; }
-+  -*) as_fn_error "unrecognized option: \`$ac_option'
-+Try \`$0 --help' for more information."
-     ;;
- 
-   *=*)
-     ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-     # Reject names that are not valid shell variable names.
--    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
--      { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
--   { (exit 1); exit 1; }; }
-+    case $ac_envvar in #(
-+      '' | [0-9]* | *[!_$as_cr_alnum]* )
-+      as_fn_error "invalid variable name: \`$ac_envvar'" ;;
-+    esac
-     eval $ac_envvar=\$ac_optarg
-     export $ac_envvar ;;
- 
-@@ -1190,15 +1143,13 @@ done
- 
- if test -n "$ac_prev"; then
-   ac_option=--`echo $ac_prev | sed 's/_/-/g'`
--  { $as_echo "$as_me: error: missing argument to $ac_option" >&2
--   { (exit 1); exit 1; }; }
-+  as_fn_error "missing argument to $ac_option"
- fi
- 
- if test -n "$ac_unrecognized_opts"; then
-   case $enable_option_checking in
-     no) ;;
--    fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2
--   { (exit 1); exit 1; }; } ;;
-+    fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
-     *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
-   esac
- fi
-@@ -1221,8 +1172,7 @@ do
-     [\\/$]* | ?:[\\/]* )  continue;;
-     NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
-   esac
--  { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
--   { (exit 1); exit 1; }; }
-+  as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
- done
- 
- # There might be people who depend on the old broken behavior: `$host'
-@@ -1252,11 +1202,9 @@ test "$silent" = yes && exec 6>/dev/null
- ac_pwd=`pwd` && test -n "$ac_pwd" &&
- ac_ls_di=`ls -di .` &&
- ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
--  { $as_echo "$as_me: error: working directory cannot be determined" >&2
--   { (exit 1); exit 1; }; }
-+  as_fn_error "working directory cannot be determined"
- test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
--  { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
--   { (exit 1); exit 1; }; }
-+  as_fn_error "pwd does not report name of working directory"
- 
- 
- # Find the source files, if location was not specified.
-@@ -1295,13 +1243,11 @@ else
- fi
- if test ! -r "$srcdir/$ac_unique_file"; then
-   test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
--  { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
--   { (exit 1); exit 1; }; }
-+  as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
- fi
- ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
- ac_abs_confdir=`(
--	cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2
--   { (exit 1); exit 1; }; }
-+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
- 	pwd)`
- # When building in place, set srcdir=.
- if test "$ac_abs_confdir" = "$ac_pwd"; then
-@@ -1425,13 +1371,19 @@ Optional Features:
-   --enable-wide-prototypes
-                           widen function prototypes (default: auto)
- 
-+Optional Packages:
-+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-+  --with-release-version=STRING
-+                          Use release version string in package name
-+
- Some influential environment variables:
-   CC          C compiler command
-   CFLAGS      C compiler flags
-   LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
-               nonstandard directory <lib dir>
-   LIBS        libraries to pass to the linker, e.g. -l<library>
--  CPPFLAGS    C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
-+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
-               you have headers in a nonstandard directory <include dir>
-   CPP         C preprocessor
-   PKG_CONFIG  path to pkg-config utility
-@@ -1468,56 +1420,509 @@ ac_abs_builddir=$ac_pwd$ac_dir_suffix
- # for backward compatibility:
- ac_top_builddir=$ac_top_build_prefix
- 
--case $srcdir in
--  .)  # We are building in place.
--    ac_srcdir=.
--    ac_top_srcdir=$ac_top_builddir_sub
--    ac_abs_top_srcdir=$ac_pwd ;;
--  [\\/]* | ?:[\\/]* )  # Absolute name.
--    ac_srcdir=$srcdir$ac_dir_suffix;
--    ac_top_srcdir=$srcdir
--    ac_abs_top_srcdir=$srcdir ;;
--  *) # Relative name.
--    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
--    ac_top_srcdir=$ac_top_build_prefix$srcdir
--    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-+case $srcdir in
-+  .)  # We are building in place.
-+    ac_srcdir=.
-+    ac_top_srcdir=$ac_top_builddir_sub
-+    ac_abs_top_srcdir=$ac_pwd ;;
-+  [\\/]* | ?:[\\/]* )  # Absolute name.
-+    ac_srcdir=$srcdir$ac_dir_suffix;
-+    ac_top_srcdir=$srcdir
-+    ac_abs_top_srcdir=$srcdir ;;
-+  *) # Relative name.
-+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-+    ac_top_srcdir=$ac_top_build_prefix$srcdir
-+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-+esac
-+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-+
-+    cd "$ac_dir" || { ac_status=$?; continue; }
-+    # Check for guested configure.
-+    if test -f "$ac_srcdir/configure.gnu"; then
-+      echo &&
-+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
-+    elif test -f "$ac_srcdir/configure"; then
-+      echo &&
-+      $SHELL "$ac_srcdir/configure" --help=recursive
-+    else
-+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-+    fi || ac_status=$?
-+    cd "$ac_pwd" || { ac_status=$?; break; }
-+  done
-+fi
-+
-+test -n "$ac_init_help" && exit $ac_status
-+if $ac_init_version; then
-+  cat <<\_ACEOF
-+Xproto configure 7.0.18
-+generated by GNU Autoconf 2.65
-+
-+Copyright (C) 2009 Free Software Foundation, Inc.
-+This configure script is free software; the Free Software Foundation
-+gives unlimited permission to copy, distribute and modify it.
-+_ACEOF
-+  exit
-+fi
-+
-+## ------------------------ ##
-+## Autoconf initialization. ##
-+## ------------------------ ##
-+
-+# ac_fn_c_try_compile LINENO
-+# --------------------------
-+# Try to compile conftest.$ac_ext, and return whether this succeeded.
-+ac_fn_c_try_compile ()
-+{
-+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-+  rm -f conftest.$ac_objext
-+  if { { ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-+$as_echo "$ac_try_echo"; } >&5
-+  (eval "$ac_compile") 2>conftest.err
-+  ac_status=$?
-+  if test -s conftest.err; then
-+    grep -v '^ *+' conftest.err >conftest.er1
-+    cat conftest.er1 >&5
-+    mv -f conftest.er1 conftest.err
-+  fi
-+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+  test $ac_status = 0; } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then :
-+  ac_retval=0
-+else
-+  $as_echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_retval=1
-+fi
-+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-+  as_fn_set_status $ac_retval
-+
-+} # ac_fn_c_try_compile
-+
-+# ac_fn_c_check_decl LINENO SYMBOL VAR
-+# ------------------------------------
-+# Tests whether SYMBOL is declared, setting cache variable VAR accordingly.
-+ac_fn_c_check_decl ()
-+{
-+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $2 is declared" >&5
-+$as_echo_n "checking whether $2 is declared... " >&6; }
-+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
-+  $as_echo_n "(cached) " >&6
-+else
-+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+/* end confdefs.h.  */
-+$4
-+int
-+main ()
-+{
-+#ifndef $2
-+  (void) $2;
-+#endif
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+if ac_fn_c_try_compile "$LINENO"; then :
-+  eval "$3=yes"
-+else
-+  eval "$3=no"
-+fi
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+eval ac_res=\$$3
-+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-+$as_echo "$ac_res" >&6; }
-+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-+
-+} # ac_fn_c_check_decl
-+
-+# ac_fn_c_try_cpp LINENO
-+# ----------------------
-+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
-+ac_fn_c_try_cpp ()
-+{
-+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-+  if { { ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-+$as_echo "$ac_try_echo"; } >&5
-+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
-+  ac_status=$?
-+  if test -s conftest.err; then
-+    grep -v '^ *+' conftest.err >conftest.er1
-+    cat conftest.er1 >&5
-+    mv -f conftest.er1 conftest.err
-+  fi
-+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+  test $ac_status = 0; } >/dev/null && {
-+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       }; then :
-+  ac_retval=0
-+else
-+  $as_echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+    ac_retval=1
-+fi
-+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-+  as_fn_set_status $ac_retval
-+
-+} # ac_fn_c_try_cpp
-+
-+# ac_fn_c_try_run LINENO
-+# ----------------------
-+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
-+# that executables *can* be run.
-+ac_fn_c_try_run ()
-+{
-+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-+  if { { ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-+$as_echo "$ac_try_echo"; } >&5
-+  (eval "$ac_link") 2>&5
-+  ac_status=$?
-+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
-+  { { case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-+$as_echo "$ac_try_echo"; } >&5
-+  (eval "$ac_try") 2>&5
-+  ac_status=$?
-+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+  test $ac_status = 0; }; }; then :
-+  ac_retval=0
-+else
-+  $as_echo "$as_me: program exited with status $ac_status" >&5
-+       $as_echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+       ac_retval=$ac_status
-+fi
-+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
-+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-+  as_fn_set_status $ac_retval
-+
-+} # ac_fn_c_try_run
-+
-+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
-+# -------------------------------------------------------
-+# Tests whether HEADER exists and can be compiled using the include files in
-+# INCLUDES, setting the cache variable VAR accordingly.
-+ac_fn_c_check_header_compile ()
-+{
-+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-+$as_echo_n "checking for $2... " >&6; }
-+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
-+  $as_echo_n "(cached) " >&6
-+else
-+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+/* end confdefs.h.  */
-+$4
-+#include <$2>
-+_ACEOF
-+if ac_fn_c_try_compile "$LINENO"; then :
-+  eval "$3=yes"
-+else
-+  eval "$3=no"
-+fi
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+eval ac_res=\$$3
-+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-+$as_echo "$ac_res" >&6; }
-+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-+
-+} # ac_fn_c_check_header_compile
-+
-+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
-+# -------------------------------------------------------
-+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
-+# the include files in INCLUDES and setting the cache variable VAR
-+# accordingly.
-+ac_fn_c_check_header_mongrel ()
-+{
-+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-+  if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-+$as_echo_n "checking for $2... " >&6; }
-+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
-+  $as_echo_n "(cached) " >&6
-+fi
-+eval ac_res=\$$3
-+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-+$as_echo "$ac_res" >&6; }
-+else
-+  # Is the header compilable?
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
-+$as_echo_n "checking $2 usability... " >&6; }
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+/* end confdefs.h.  */
-+$4
-+#include <$2>
-+_ACEOF
-+if ac_fn_c_try_compile "$LINENO"; then :
-+  ac_header_compiler=yes
-+else
-+  ac_header_compiler=no
-+fi
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
-+$as_echo "$ac_header_compiler" >&6; }
-+
-+# Is the header present?
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
-+$as_echo_n "checking $2 presence... " >&6; }
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+/* end confdefs.h.  */
-+#include <$2>
-+_ACEOF
-+if ac_fn_c_try_cpp "$LINENO"; then :
-+  ac_header_preproc=yes
-+else
-+  ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
-+$as_echo "$ac_header_preproc" >&6; }
-+
-+# So?  What about this header?
-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
-+  yes:no: )
-+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
-+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
-+    ;;
-+  no:yes:* )
-+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
-+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
-+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
-+$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
-+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
-+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
-+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
-+$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
-+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
-+( cat <<\_ASBOX
-+## ---------------------------------------------------------------------- ##
-+## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-+## ---------------------------------------------------------------------- ##
-+_ASBOX
-+     ) | sed "s/^/$as_me: WARNING:     /" >&2
-+    ;;
-+esac
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-+$as_echo_n "checking for $2... " >&6; }
-+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
-+  $as_echo_n "(cached) " >&6
-+else
-+  eval "$3=\$ac_header_compiler"
-+fi
-+eval ac_res=\$$3
-+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-+$as_echo "$ac_res" >&6; }
-+fi
-+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-+
-+} # ac_fn_c_check_header_mongrel
-+
-+# ac_fn_c_check_member LINENO AGGR MEMBER VAR INCLUDES
-+# ----------------------------------------------------
-+# Tries to find if the field MEMBER exists in type AGGR, after including
-+# INCLUDES, setting cache variable VAR accordingly.
-+ac_fn_c_check_member ()
-+{
-+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5
-+$as_echo_n "checking for $2.$3... " >&6; }
-+if { as_var=$4; eval "test \"\${$as_var+set}\" = set"; }; then :
-+  $as_echo_n "(cached) " >&6
-+else
-+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+/* end confdefs.h.  */
-+$5
-+int
-+main ()
-+{
-+static $2 ac_aggr;
-+if (ac_aggr.$3)
-+return 0;
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+if ac_fn_c_try_compile "$LINENO"; then :
-+  eval "$4=yes"
-+else
-+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+/* end confdefs.h.  */
-+$5
-+int
-+main ()
-+{
-+static $2 ac_aggr;
-+if (sizeof ac_aggr.$3)
-+return 0;
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+if ac_fn_c_try_compile "$LINENO"; then :
-+  eval "$4=yes"
-+else
-+  eval "$4=no"
-+fi
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+eval ac_res=\$$4
-+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-+$as_echo "$ac_res" >&6; }
-+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-+
-+} # ac_fn_c_check_member
-+
-+# ac_fn_c_try_link LINENO
-+# -----------------------
-+# Try to link conftest.$ac_ext, and return whether this succeeded.
-+ac_fn_c_try_link ()
-+{
-+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-+  rm -f conftest.$ac_objext conftest$ac_exeext
-+  if { { ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
- esac
--ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-+$as_echo "$ac_try_echo"; } >&5
-+  (eval "$ac_link") 2>conftest.err
-+  ac_status=$?
-+  if test -s conftest.err; then
-+    grep -v '^ *+' conftest.err >conftest.er1
-+    cat conftest.er1 >&5
-+    mv -f conftest.er1 conftest.err
-+  fi
-+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+  test $ac_status = 0; } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext && {
-+	 test "$cross_compiling" = yes ||
-+	 $as_test_x conftest$ac_exeext
-+       }; then :
-+  ac_retval=0
-+else
-+  $as_echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
- 
--    cd "$ac_dir" || { ac_status=$?; continue; }
--    # Check for guested configure.
--    if test -f "$ac_srcdir/configure.gnu"; then
--      echo &&
--      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
--    elif test -f "$ac_srcdir/configure"; then
--      echo &&
--      $SHELL "$ac_srcdir/configure" --help=recursive
--    else
--      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
--    fi || ac_status=$?
--    cd "$ac_pwd" || { ac_status=$?; break; }
--  done
-+	ac_retval=1
- fi
-+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
-+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
-+  # interfere with the next link command; also delete a directory that is
-+  # left behind by Apple's compiler.  We do this before executing the actions.
-+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
-+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-+  as_fn_set_status $ac_retval
-+
-+} # ac_fn_c_try_link
-+
-+# ac_fn_c_check_func LINENO FUNC VAR
-+# ----------------------------------
-+# Tests whether FUNC exists, setting the cache variable VAR accordingly
-+ac_fn_c_check_func ()
-+{
-+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-+$as_echo_n "checking for $2... " >&6; }
-+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
-+  $as_echo_n "(cached) " >&6
-+else
-+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+/* end confdefs.h.  */
-+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
-+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-+#define $2 innocuous_$2
-+
-+/* System header to define __stub macros and hopefully few prototypes,
-+    which can conflict with char $2 (); below.
-+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+    <limits.h> exists even on freestanding compilers.  */
- 
--test -n "$ac_init_help" && exit $ac_status
--if $ac_init_version; then
--  cat <<\_ACEOF
--Xproto configure 7.0.18
--generated by GNU Autoconf 2.63
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
- 
--Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
--2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
--This configure script is free software; the Free Software Foundation
--gives unlimited permission to copy, distribute and modify it.
-+#undef $2
-+
-+/* Override any GCC internal prototype to avoid an error.
-+   Use char because int might match the return type of a GCC
-+   builtin and then its argument prototype would still apply.  */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char $2 ();
-+/* The GNU C library defines this for functions which it implements
-+    to always fail with ENOSYS.  Some functions are actually named
-+    something starting with __ and the normal name is an alias.  */
-+#if defined __stub_$2 || defined __stub___$2
-+choke me
-+#endif
-+
-+int
-+main ()
-+{
-+return $2 ();
-+  ;
-+  return 0;
-+}
- _ACEOF
--  exit
-+if ac_fn_c_try_link "$LINENO"; then :
-+  eval "$3=yes"
-+else
-+  eval "$3=no"
- fi
-+rm -f core conftest.err conftest.$ac_objext \
-+    conftest$ac_exeext conftest.$ac_ext
-+fi
-+eval ac_res=\$$3
-+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-+$as_echo "$ac_res" >&6; }
-+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-+
-+} # ac_fn_c_check_func
- cat >config.log <<_ACEOF
- This file contains any messages produced by compilers while
- running configure, to aid debugging if configure makes a mistake.
- 
- It was created by Xproto $as_me 7.0.18, which was
--generated by GNU Autoconf 2.63.  Invocation command line was
-+generated by GNU Autoconf 2.65.  Invocation command line was
- 
-   $ $0 $@
- 
-@@ -1553,8 +1958,8 @@ for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
--  $as_echo "PATH: $as_dir"
--done
-+    $as_echo "PATH: $as_dir"
-+  done
- IFS=$as_save_IFS
- 
- } >&5
-@@ -1591,9 +1996,9 @@ do
-       ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-     esac
-     case $ac_pass in
--    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
-+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
-     2)
--      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
-+      as_fn_append ac_configure_args1 " '$ac_arg'"
-       if test $ac_must_keep_next = true; then
- 	ac_must_keep_next=false # Got value, back to normal.
-       else
-@@ -1609,13 +2014,13 @@ do
- 	  -* ) ac_must_keep_next=true ;;
- 	esac
-       fi
--      ac_configure_args="$ac_configure_args '$ac_arg'"
-+      as_fn_append ac_configure_args " '$ac_arg'"
-       ;;
-     esac
-   done
- done
--$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
--$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-+{ ac_configure_args0=; unset ac_configure_args0;}
-+{ ac_configure_args1=; unset ac_configure_args1;}
- 
- # When interrupted or exit'd, cleanup temporary files, and complete
- # config.log.  We remove comments because anyway the quotes in there
-@@ -1640,13 +2045,13 @@ _ASBOX
-     case $ac_val in #(
-     *${as_nl}*)
-       case $ac_var in #(
--      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
-+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
- $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-       esac
-       case $ac_var in #(
-       _ | IFS | as_nl) ;; #(
-       BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
--      *) $as_unset $ac_var ;;
-+      *) { eval $ac_var=; unset $ac_var;} ;;
-       esac ;;
-     esac
-   done
-@@ -1718,39 +2123,41 @@ _ASBOX
-     exit $exit_status
- ' 0
- for ac_signal in 1 2 13 15; do
--  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
- done
- ac_signal=0
- 
- # confdefs.h avoids OS command line length limits that DEFS can exceed.
- rm -f -r conftest* confdefs.h
- 
-+$as_echo "/* confdefs.h */" > confdefs.h
-+
- # Predefined preprocessor variables.
- 
- cat >>confdefs.h <<_ACEOF
- #define PACKAGE_NAME "$PACKAGE_NAME"
- _ACEOF
- 
--
- cat >>confdefs.h <<_ACEOF
- #define PACKAGE_TARNAME "$PACKAGE_TARNAME"
- _ACEOF
- 
--
- cat >>confdefs.h <<_ACEOF
- #define PACKAGE_VERSION "$PACKAGE_VERSION"
- _ACEOF
- 
--
- cat >>confdefs.h <<_ACEOF
- #define PACKAGE_STRING "$PACKAGE_STRING"
- _ACEOF
- 
--
- cat >>confdefs.h <<_ACEOF
- #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
- _ACEOF
- 
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_URL "$PACKAGE_URL"
-+_ACEOF
-+
- 
- # Let the site file select an alternate cache file if it wants to.
- # Prefer an explicitly selected file to automatically selected ones.
-@@ -1768,8 +2175,8 @@ fi
- for ac_site_file in "$ac_site_file1" "$ac_site_file2"
- do
-   test "x$ac_site_file" = xNONE && continue
--  if test -r "$ac_site_file"; then
--    { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
-+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
- $as_echo "$as_me: loading site script $ac_site_file" >&6;}
-     sed 's/^/| /' "$ac_site_file" >&5
-     . "$ac_site_file"
-@@ -1777,10 +2184,10 @@ $as_echo "$as_me: loading site script $a
- done
- 
- if test -r "$cache_file"; then
--  # Some versions of bash will fail to source /dev/null (special
--  # files actually), so we avoid doing that.
--  if test -f "$cache_file"; then
--    { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
-+  # Some versions of bash will fail to source /dev/null (special files
-+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
-+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
-+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
- $as_echo "$as_me: loading cache $cache_file" >&6;}
-     case $cache_file in
-       [\\/]* | ?:[\\/]* ) . "$cache_file";;
-@@ -1788,7 +2195,7 @@ $as_echo "$as_me: loading cache $cache_f
-     esac
-   fi
- else
--  { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
- $as_echo "$as_me: creating cache $cache_file" >&6;}
-   >$cache_file
- fi
-@@ -1803,11 +2210,11 @@ for ac_var in $ac_precious_vars; do
-   eval ac_new_val=\$ac_env_${ac_var}_value
-   case $ac_old_set,$ac_new_set in
-     set,)
--      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
- $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-       ac_cache_corrupted=: ;;
-     ,set)
--      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
- $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-       ac_cache_corrupted=: ;;
-     ,);;
-@@ -1817,17 +2224,17 @@ $as_echo "$as_me: error: \`$ac_var' was 
- 	ac_old_val_w=`echo x $ac_old_val`
- 	ac_new_val_w=`echo x $ac_new_val`
- 	if test "$ac_old_val_w" != "$ac_new_val_w"; then
--	  { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
- $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- 	  ac_cache_corrupted=:
- 	else
--	  { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
- $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
- 	  eval $ac_var=\$ac_old_val
- 	fi
--	{ $as_echo "$as_me:$LINENO:   former value:  \`$ac_old_val'" >&5
-+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
- $as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
--	{ $as_echo "$as_me:$LINENO:   current value: \`$ac_new_val'" >&5
-+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
- $as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
-       fi;;
-   esac
-@@ -1839,43 +2246,20 @@ $as_echo "$as_me:   current value: \`$ac
-     esac
-     case " $ac_configure_args " in
-       *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
--      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
-     esac
-   fi
- done
- if $ac_cache_corrupted; then
--  { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
- $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
--  { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
- $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
--  { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
--$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
--   { (exit 1); exit 1; }; }
-+  as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
- fi
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-+## -------------------- ##
-+## Main body of script. ##
-+## -------------------- ##
- 
- ac_ext=c
- ac_cpp='$CPP $CPPFLAGS'
-@@ -1888,24 +2272,16 @@ am__api_version='1.11'
- 
- ac_aux_dir=
- for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
--  if test -f "$ac_dir/install-sh"; then
--    ac_aux_dir=$ac_dir
--    ac_install_sh="$ac_aux_dir/install-sh -c"
--    break
--  elif test -f "$ac_dir/install.sh"; then
--    ac_aux_dir=$ac_dir
--    ac_install_sh="$ac_aux_dir/install.sh -c"
--    break
--  elif test -f "$ac_dir/shtool"; then
--    ac_aux_dir=$ac_dir
--    ac_install_sh="$ac_aux_dir/shtool install -c"
--    break
--  fi
-+  for ac_t in install-sh install.sh shtool; do
-+    if test -f "$ac_dir/$ac_t"; then
-+      ac_aux_dir=$ac_dir
-+      ac_install_sh="$ac_aux_dir/$ac_t -c"
-+      break 2
-+    fi
-+  done
- done
- if test -z "$ac_aux_dir"; then
--  { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
--$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
--   { (exit 1); exit 1; }; }
-+  as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
- fi
- 
- # These three variables are undocumented and unsupported,
-@@ -1931,10 +2307,10 @@ ac_configure="$SHELL $ac_aux_dir/configu
- # OS/2's system install, which has a completely different semantic
- # ./install, which can be erroneously created by make from ./install.sh.
- # Reject install programs that cannot install multiple files.
--{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
- $as_echo_n "checking for a BSD-compatible install... " >&6; }
- if test -z "$INSTALL"; then
--if test "${ac_cv_path_install+set}" = set; then
-+if test "${ac_cv_path_install+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-@@ -1942,11 +2318,11 @@ for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
--  # Account for people who put trailing slashes in PATH elements.
--case $as_dir/ in
--  ./ | .// | /cC/* | \
-+    # Account for people who put trailing slashes in PATH elements.
-+case $as_dir/ in #((
-+  ./ | .// | /[cC]/* | \
-   /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
--  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
-+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
-   /usr/ucb/* ) ;;
-   *)
-     # OSF1 and SCO ODT 3.0 have their own names for install.
-@@ -1983,7 +2359,7 @@ case $as_dir/ in
-     ;;
- esac
- 
--done
-+  done
- IFS=$as_save_IFS
- 
- rm -rf conftest.one conftest.two conftest.dir
-@@ -1999,7 +2375,7 @@ fi
-     INSTALL=$ac_install_sh
-   fi
- fi
--{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
- $as_echo "$INSTALL" >&6; }
- 
- # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-@@ -2010,7 +2386,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCR
- 
- test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
- 
--{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
- $as_echo_n "checking whether build environment is sane... " >&6; }
- # Just in case
- sleep 1
-@@ -2021,15 +2397,11 @@ am_lf='
- '
- case `pwd` in
-   *[\\\"\#\$\&\'\`$am_lf]*)
--    { { $as_echo "$as_me:$LINENO: error: unsafe absolute working directory name" >&5
--$as_echo "$as_me: error: unsafe absolute working directory name" >&2;}
--   { (exit 1); exit 1; }; };;
-+    as_fn_error "unsafe absolute working directory name" "$LINENO" 5;;
- esac
- case $srcdir in
-   *[\\\"\#\$\&\'\`$am_lf\ \	]*)
--    { { $as_echo "$as_me:$LINENO: error: unsafe srcdir value: \`$srcdir'" >&5
--$as_echo "$as_me: error: unsafe srcdir value: \`$srcdir'" >&2;}
--   { (exit 1); exit 1; }; };;
-+    as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
- esac
- 
- # Do `set' in a subshell so we don't clobber the current shell's
-@@ -2051,11 +2423,8 @@ if (
-       # if, for instance, CONFIG_SHELL is bash and it inherits a
-       # broken ls alias from the environment.  This has actually
-       # happened.  Such a system could not be considered "sane".
--      { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
--alias in your environment" >&5
--$as_echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
--alias in your environment" >&2;}
--   { (exit 1); exit 1; }; }
-+      as_fn_error "ls -t appears to fail.  Make sure there is not a broken
-+alias in your environment" "$LINENO" 5
-    fi
- 
-    test "$2" = conftest.file
-@@ -2064,13 +2433,10 @@ then
-    # Ok.
-    :
- else
--   { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files!
--Check your system clock" >&5
--$as_echo "$as_me: error: newly created file is older than distributed files!
--Check your system clock" >&2;}
--   { (exit 1); exit 1; }; }
-+   as_fn_error "newly created file is older than distributed files!
-+Check your system clock" "$LINENO" 5
- fi
--{ $as_echo "$as_me:$LINENO: result: yes" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
- $as_echo "yes" >&6; }
- test "$program_prefix" != NONE &&
-   program_transform_name="s&^&$program_prefix&;$program_transform_name"
-@@ -2098,7 +2464,7 @@ if eval "$MISSING --run true"; then
-   am_missing_run="$MISSING --run "
- else
-   am_missing_run=
--  { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
- $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
- fi
- 
-@@ -2119,9 +2485,9 @@ if test "$cross_compiling" != no; then
-   if test -n "$ac_tool_prefix"; then
-   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
- set dummy ${ac_tool_prefix}strip; ac_word=$2
--{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
--if test "${ac_cv_prog_STRIP+set}" = set; then
-+if test "${ac_cv_prog_STRIP+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$STRIP"; then
-@@ -2132,24 +2498,24 @@ for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
--  for ac_exec_ext in '' $ac_executable_extensions; do
-+    for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_STRIP="${ac_tool_prefix}strip"
--    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
--done
-+  done
- IFS=$as_save_IFS
- 
- fi
- fi
- STRIP=$ac_cv_prog_STRIP
- if test -n "$STRIP"; then
--  { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
- $as_echo "$STRIP" >&6; }
- else
--  { $as_echo "$as_me:$LINENO: result: no" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
- 
-@@ -2159,9 +2525,9 @@ if test -z "$ac_cv_prog_STRIP"; then
-   ac_ct_STRIP=$STRIP
-   # Extract the first word of "strip", so it can be a program name with args.
- set dummy strip; ac_word=$2
--{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
--if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$ac_ct_STRIP"; then
-@@ -2172,24 +2538,24 @@ for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
--  for ac_exec_ext in '' $ac_executable_extensions; do
-+    for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_ac_ct_STRIP="strip"
--    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
--done
-+  done
- IFS=$as_save_IFS
- 
- fi
- fi
- ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
- if test -n "$ac_ct_STRIP"; then
--  { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
- $as_echo "$ac_ct_STRIP" >&6; }
- else
--  { $as_echo "$as_me:$LINENO: result: no" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
- 
-@@ -2198,7 +2564,7 @@ fi
-   else
-     case $cross_compiling:$ac_tool_warned in
- yes:)
--{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
- $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
- ac_tool_warned=yes ;;
- esac
-@@ -2211,10 +2577,10 @@ fi
- fi
- INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
- 
--{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
- $as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
- if test -z "$MKDIR_P"; then
--  if test "${ac_cv_path_mkdir+set}" = set; then
-+  if test "${ac_cv_path_mkdir+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-@@ -2222,7 +2588,7 @@ for as_dir in $PATH$PATH_SEPARATOR/opt/s
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
--  for ac_prog in mkdir gmkdir; do
-+    for ac_prog in mkdir gmkdir; do
- 	 for ac_exec_ext in '' $ac_executable_extensions; do
- 	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
- 	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
-@@ -2234,11 +2600,12 @@ do
- 	   esac
- 	 done
-        done
--done
-+  done
- IFS=$as_save_IFS
- 
- fi
- 
-+  test -d ./--version && rmdir ./--version
-   if test "${ac_cv_path_mkdir+set}" = set; then
-     MKDIR_P="$ac_cv_path_mkdir -p"
-   else
-@@ -2246,11 +2613,10 @@ fi
-     # value for MKDIR_P within a source directory, because that will
-     # break other packages using the cache if that directory is
-     # removed, or if the value is a relative name.
--    test -d ./--version && rmdir ./--version
-     MKDIR_P="$ac_install_sh -d"
-   fi
- fi
--{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
- $as_echo "$MKDIR_P" >&6; }
- 
- mkdir_p="$MKDIR_P"
-@@ -2263,9 +2629,9 @@ for ac_prog in gawk mawk nawk awk
- do
-   # Extract the first word of "$ac_prog", so it can be a program name with args.
- set dummy $ac_prog; ac_word=$2
--{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
--if test "${ac_cv_prog_AWK+set}" = set; then
-+if test "${ac_cv_prog_AWK+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$AWK"; then
-@@ -2276,24 +2642,24 @@ for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
--  for ac_exec_ext in '' $ac_executable_extensions; do
-+    for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_AWK="$ac_prog"
--    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
--done
-+  done
- IFS=$as_save_IFS
- 
- fi
- fi
- AWK=$ac_cv_prog_AWK
- if test -n "$AWK"; then
--  { $as_echo "$as_me:$LINENO: result: $AWK" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
- $as_echo "$AWK" >&6; }
- else
--  { $as_echo "$as_me:$LINENO: result: no" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
- 
-@@ -2301,11 +2667,11 @@ fi
-   test -n "$AWK" && break
- done
- 
--{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
- $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
- set x ${MAKE-make}
- ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
--if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
-+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
-   $as_echo_n "(cached) " >&6
- else
-   cat >conftest.make <<\_ACEOF
-@@ -2323,11 +2689,11 @@ esac
- rm -f conftest.make
- fi
- if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
--  { $as_echo "$as_me:$LINENO: result: yes" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
- $as_echo "yes" >&6; }
-   SET_MAKE=
- else
--  { $as_echo "$as_me:$LINENO: result: no" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
-   SET_MAKE="MAKE=${MAKE-make}"
- fi
-@@ -2347,9 +2713,7 @@ if test "`cd $srcdir && pwd`" != "`pwd`"
-   am__isrc=' -I$(srcdir)'
-   # test to see if srcdir already configured
-   if test -f $srcdir/config.status; then
--    { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
--$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
--   { (exit 1); exit 1; }; }
-+    as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
-   fi
- fi
- 
-@@ -2406,16 +2770,16 @@ am__tar='${AMTAR} chof - "$$tardir"'; am
- 
- 
- 
--{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
- $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
-     # Check whether --enable-maintainer-mode was given.
--if test "${enable_maintainer_mode+set}" = set; then
-+if test "${enable_maintainer_mode+set}" = set; then :
-   enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
- else
-   USE_MAINTAINER_MODE=no
- fi
- 
--  { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
- $as_echo "$USE_MAINTAINER_MODE" >&6; }
-    if test $USE_MAINTAINER_MODE = yes; then
-   MAINTAINER_MODE_TRUE=
-@@ -2453,7 +2817,7 @@ am__doit:
- .PHONY: am__doit
- END
- # If we don't find an include directive, just comment out the code.
--{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
- $as_echo_n "checking for style of include used by $am_make... " >&6; }
- am__include="#"
- am__quote=
-@@ -2481,12 +2845,12 @@ if test "$am__include" = "#"; then
- fi
- 
- 
--{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
- $as_echo "$_am_result" >&6; }
- rm -f confinc confmf
- 
- # Check whether --enable-dependency-tracking was given.
--if test "${enable_dependency_tracking+set}" = set; then
-+if test "${enable_dependency_tracking+set}" = set; then :
-   enableval=$enable_dependency_tracking;
- fi
- 
-@@ -2511,9 +2875,9 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
- if test -n "$ac_tool_prefix"; then
-   # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
- set dummy ${ac_tool_prefix}gcc; ac_word=$2
--{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
--if test "${ac_cv_prog_CC+set}" = set; then
-+if test "${ac_cv_prog_CC+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$CC"; then
-@@ -2524,24 +2888,24 @@ for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
--  for ac_exec_ext in '' $ac_executable_extensions; do
-+    for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_CC="${ac_tool_prefix}gcc"
--    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
--done
-+  done
- IFS=$as_save_IFS
- 
- fi
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
--  { $as_echo "$as_me:$LINENO: result: $CC" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
- $as_echo "$CC" >&6; }
- else
--  { $as_echo "$as_me:$LINENO: result: no" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
- 
-@@ -2551,9 +2915,9 @@ if test -z "$ac_cv_prog_CC"; then
-   ac_ct_CC=$CC
-   # Extract the first word of "gcc", so it can be a program name with args.
- set dummy gcc; ac_word=$2
--{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
--if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$ac_ct_CC"; then
-@@ -2564,24 +2928,24 @@ for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
--  for ac_exec_ext in '' $ac_executable_extensions; do
-+    for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_ac_ct_CC="gcc"
--    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
--done
-+  done
- IFS=$as_save_IFS
- 
- fi
- fi
- ac_ct_CC=$ac_cv_prog_ac_ct_CC
- if test -n "$ac_ct_CC"; then
--  { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
- $as_echo "$ac_ct_CC" >&6; }
- else
--  { $as_echo "$as_me:$LINENO: result: no" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
- 
-@@ -2590,7 +2954,7 @@ fi
-   else
-     case $cross_compiling:$ac_tool_warned in
- yes:)
--{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
- $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
- ac_tool_warned=yes ;;
- esac
-@@ -2604,9 +2968,9 @@ if test -z "$CC"; then
-           if test -n "$ac_tool_prefix"; then
-     # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
- set dummy ${ac_tool_prefix}cc; ac_word=$2
--{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
--if test "${ac_cv_prog_CC+set}" = set; then
-+if test "${ac_cv_prog_CC+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$CC"; then
-@@ -2617,24 +2981,24 @@ for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
--  for ac_exec_ext in '' $ac_executable_extensions; do
-+    for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_CC="${ac_tool_prefix}cc"
--    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
--done
-+  done
- IFS=$as_save_IFS
- 
- fi
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
--  { $as_echo "$as_me:$LINENO: result: $CC" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
- $as_echo "$CC" >&6; }
- else
--  { $as_echo "$as_me:$LINENO: result: no" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
- 
-@@ -2644,9 +3008,9 @@ fi
- if test -z "$CC"; then
-   # Extract the first word of "cc", so it can be a program name with args.
- set dummy cc; ac_word=$2
--{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
--if test "${ac_cv_prog_CC+set}" = set; then
-+if test "${ac_cv_prog_CC+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$CC"; then
-@@ -2658,18 +3022,18 @@ for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
--  for ac_exec_ext in '' $ac_executable_extensions; do
-+    for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-        continue
-      fi
-     ac_cv_prog_CC="cc"
--    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
--done
-+  done
- IFS=$as_save_IFS
- 
- if test $ac_prog_rejected = yes; then
-@@ -2688,10 +3052,10 @@ fi
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
--  { $as_echo "$as_me:$LINENO: result: $CC" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
- $as_echo "$CC" >&6; }
- else
--  { $as_echo "$as_me:$LINENO: result: no" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
- 
-@@ -2703,9 +3067,9 @@ if test -z "$CC"; then
-   do
-     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
- set dummy $ac_tool_prefix$ac_prog; ac_word=$2
--{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
--if test "${ac_cv_prog_CC+set}" = set; then
-+if test "${ac_cv_prog_CC+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$CC"; then
-@@ -2716,24 +3080,24 @@ for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
--  for ac_exec_ext in '' $ac_executable_extensions; do
-+    for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
--    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
--done
-+  done
- IFS=$as_save_IFS
- 
- fi
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
--  { $as_echo "$as_me:$LINENO: result: $CC" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
- $as_echo "$CC" >&6; }
- else
--  { $as_echo "$as_me:$LINENO: result: no" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
- 
-@@ -2747,9 +3111,9 @@ if test -z "$CC"; then
- do
-   # Extract the first word of "$ac_prog", so it can be a program name with args.
- set dummy $ac_prog; ac_word=$2
--{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
--if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$ac_ct_CC"; then
-@@ -2760,24 +3124,24 @@ for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
--  for ac_exec_ext in '' $ac_executable_extensions; do
-+    for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_ac_ct_CC="$ac_prog"
--    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
--done
-+  done
- IFS=$as_save_IFS
- 
- fi
- fi
- ac_ct_CC=$ac_cv_prog_ac_ct_CC
- if test -n "$ac_ct_CC"; then
--  { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
- $as_echo "$ac_ct_CC" >&6; }
- else
--  { $as_echo "$as_me:$LINENO: result: no" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
- 
-@@ -2790,7 +3154,7 @@ done
-   else
-     case $cross_compiling:$ac_tool_warned in
- yes:)
--{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
- $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
- ac_tool_warned=yes ;;
- esac
-@@ -2801,57 +3165,37 @@ fi
- fi
- 
- 
--test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
- $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
--{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
--See \`config.log' for more details." >&5
--$as_echo "$as_me: error: no acceptable C compiler found in \$PATH
--See \`config.log' for more details." >&2;}
--   { (exit 1); exit 1; }; }; }
-+as_fn_error "no acceptable C compiler found in \$PATH
-+See \`config.log' for more details." "$LINENO" 5; }
- 
- # Provide some information about the compiler.
--$as_echo "$as_me:$LINENO: checking for C compiler version" >&5
-+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
- set X $ac_compile
- ac_compiler=$2
--{ (ac_try="$ac_compiler --version >&5"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_compiler --version >&5") 2>&5
--  ac_status=$?
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); }
--{ (ac_try="$ac_compiler -v >&5"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_compiler -v >&5") 2>&5
--  ac_status=$?
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); }
--{ (ac_try="$ac_compiler -V >&5"
-+for ac_option in --version -v -V -qversion; do
-+  { { ac_try="$ac_compiler $ac_option >&5"
- case "(($ac_try" in
-   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-   *) ac_try_echo=$ac_try;;
- esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_compiler -V >&5") 2>&5
-+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-+$as_echo "$ac_try_echo"; } >&5
-+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
-   ac_status=$?
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); }
-+  if test -s conftest.err; then
-+    sed '10a\
-+... rest of stderr output deleted ...
-+         10q' conftest.err >conftest.er1
-+    cat conftest.er1 >&5
-+  fi
-+  rm -f conftest.er1 conftest.err
-+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+  test $ac_status = 0; }
-+done
- 
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- 
- int
-@@ -2867,8 +3211,8 @@ ac_clean_files="$ac_clean_files a.out a.
- # Try to create an executable without -o first, disregard a.out.
- # It will help us diagnose broken compilers, and finding out an intuition
- # of exeext.
--{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
--$as_echo_n "checking for C compiler default output file name... " >&6; }
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
-+$as_echo_n "checking whether the C compiler works... " >&6; }
- ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
- 
- # The possible output files:
-@@ -2884,17 +3228,17 @@ do
- done
- rm -f $ac_rmfiles
- 
--if { (ac_try="$ac_link_default"
-+if { { ac_try="$ac_link_default"
- case "(($ac_try" in
-   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-   *) ac_try_echo=$ac_try;;
- esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
-+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-+$as_echo "$ac_try_echo"; } >&5
-   (eval "$ac_link_default") 2>&5
-   ac_status=$?
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); }; then
-+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+  test $ac_status = 0; }; then :
-   # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
- # So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
- # in a Makefile.  We should not override ac_cv_exeext if it was cached,
-@@ -2911,7 +3255,7 @@ do
- 	# certainly right.
- 	break;;
-     *.* )
--        if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
-+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
- 	then :; else
- 	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- 	fi
-@@ -2930,84 +3274,42 @@ test "$ac_cv_exeext" = no && ac_cv_exeex
- else
-   ac_file=''
- fi
--
--{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5
--$as_echo "$ac_file" >&6; }
--if test -z "$ac_file"; then
--  $as_echo "$as_me: failed program was:" >&5
-+if test -z "$ac_file"; then :
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
-+$as_echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
- 
--{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
- $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
--{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables
--See \`config.log' for more details." >&5
--$as_echo "$as_me: error: C compiler cannot create executables
--See \`config.log' for more details." >&2;}
--   { (exit 77); exit 77; }; }; }
-+{ as_fn_set_status 77
-+as_fn_error "C compiler cannot create executables
-+See \`config.log' for more details." "$LINENO" 5; }; }
-+else
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-+$as_echo "yes" >&6; }
- fi
--
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
-+$as_echo_n "checking for C compiler default output file name... " >&6; }
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
-+$as_echo "$ac_file" >&6; }
- ac_exeext=$ac_cv_exeext
- 
--# Check that the compiler produces executables we can run.  If not, either
--# the compiler is broken, or we cross compile.
--{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5
--$as_echo_n "checking whether the C compiler works... " >&6; }
--# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
--# If not cross compiling, check that we can run a simple program.
--if test "$cross_compiling" != yes; then
--  if { ac_try='./$ac_file'
--  { (case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_try") 2>&5
--  ac_status=$?
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); }; }; then
--    cross_compiling=no
--  else
--    if test "$cross_compiling" = maybe; then
--	cross_compiling=yes
--    else
--	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
--$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
--{ { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs.
--If you meant to cross compile, use \`--host'.
--See \`config.log' for more details." >&5
--$as_echo "$as_me: error: cannot run C compiled programs.
--If you meant to cross compile, use \`--host'.
--See \`config.log' for more details." >&2;}
--   { (exit 1); exit 1; }; }; }
--    fi
--  fi
--fi
--{ $as_echo "$as_me:$LINENO: result: yes" >&5
--$as_echo "yes" >&6; }
--
- rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
- ac_clean_files=$ac_clean_files_save
--# Check that the compiler produces executables we can run.  If not, either
--# the compiler is broken, or we cross compile.
--{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
--$as_echo_n "checking whether we are cross compiling... " >&6; }
--{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5
--$as_echo "$cross_compiling" >&6; }
--
--{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
- $as_echo_n "checking for suffix of executables... " >&6; }
--if { (ac_try="$ac_link"
-+if { { ac_try="$ac_link"
- case "(($ac_try" in
-   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-   *) ac_try_echo=$ac_try;;
- esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
-+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-+$as_echo "$ac_try_echo"; } >&5
-   (eval "$ac_link") 2>&5
-   ac_status=$?
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); }; then
-+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+  test $ac_status = 0; }; then :
-   # If both `conftest.exe' and `conftest' are `present' (well, observable)
- # catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
- # work properly (i.e., refer to `conftest.exe'), while it won't with
-@@ -3022,32 +3324,83 @@ for ac_file in conftest.exe conftest con
-   esac
- done
- else
--  { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
- $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
--{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
--See \`config.log' for more details." >&5
--$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
--See \`config.log' for more details." >&2;}
--   { (exit 1); exit 1; }; }; }
-+as_fn_error "cannot compute suffix of executables: cannot compile and link
-+See \`config.log' for more details." "$LINENO" 5; }
- fi
--
--rm -f conftest$ac_cv_exeext
--{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-+rm -f conftest conftest$ac_cv_exeext
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
- $as_echo "$ac_cv_exeext" >&6; }
- 
- rm -f conftest.$ac_ext
- EXEEXT=$ac_cv_exeext
- ac_exeext=$EXEEXT
--{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+/* end confdefs.h.  */
-+#include <stdio.h>
-+int
-+main ()
-+{
-+FILE *f = fopen ("conftest.out", "w");
-+ return ferror (f) || fclose (f) != 0;
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+ac_clean_files="$ac_clean_files conftest.out"
-+# Check that the compiler produces executables we can run.  If not, either
-+# the compiler is broken, or we cross compile.
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
-+$as_echo_n "checking whether we are cross compiling... " >&6; }
-+if test "$cross_compiling" != yes; then
-+  { { ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-+$as_echo "$ac_try_echo"; } >&5
-+  (eval "$ac_link") 2>&5
-+  ac_status=$?
-+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+  test $ac_status = 0; }
-+  if { ac_try='./conftest$ac_cv_exeext'
-+  { { case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-+$as_echo "$ac_try_echo"; } >&5
-+  (eval "$ac_try") 2>&5
-+  ac_status=$?
-+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+  test $ac_status = 0; }; }; then
-+    cross_compiling=no
-+  else
-+    if test "$cross_compiling" = maybe; then
-+	cross_compiling=yes
-+    else
-+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-+as_fn_error "cannot run C compiled programs.
-+If you meant to cross compile, use \`--host'.
-+See \`config.log' for more details." "$LINENO" 5; }
-+    fi
-+  fi
-+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
-+$as_echo "$cross_compiling" >&6; }
-+
-+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
-+ac_clean_files=$ac_clean_files_save
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
- $as_echo_n "checking for suffix of object files... " >&6; }
--if test "${ac_cv_objext+set}" = set; then
-+if test "${ac_cv_objext+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
--  cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- 
- int
-@@ -3059,17 +3412,17 @@ main ()
- }
- _ACEOF
- rm -f conftest.o conftest.obj
--if { (ac_try="$ac_compile"
-+if { { ac_try="$ac_compile"
- case "(($ac_try" in
-   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-   *) ac_try_echo=$ac_try;;
- esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
-+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-+$as_echo "$ac_try_echo"; } >&5
-   (eval "$ac_compile") 2>&5
-   ac_status=$?
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); }; then
-+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+  test $ac_status = 0; }; then :
-   for ac_file in conftest.o conftest.obj conftest.*; do
-   test -f "$ac_file" || continue;
-   case $ac_file in
-@@ -3082,31 +3435,23 @@ else
-   $as_echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
- 
--{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
- $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
--{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
--See \`config.log' for more details." >&5
--$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile
--See \`config.log' for more details." >&2;}
--   { (exit 1); exit 1; }; }; }
-+as_fn_error "cannot compute suffix of object files: cannot compile
-+See \`config.log' for more details." "$LINENO" 5; }
- fi
--
- rm -f conftest.$ac_cv_objext conftest.$ac_ext
- fi
--{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
- $as_echo "$ac_cv_objext" >&6; }
- OBJEXT=$ac_cv_objext
- ac_objext=$OBJEXT
--{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
- $as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
--if test "${ac_cv_c_compiler_gnu+set}" = set; then
-+if test "${ac_cv_c_compiler_gnu+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
--  cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- 
- int
-@@ -3115,42 +3460,21 @@ main ()
- #ifndef __GNUC__
-        choke me
- #endif
--
--  ;
--  return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext
--if { (ac_try="$ac_compile"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_compile") 2>conftest.er1
--  ac_status=$?
--  grep -v '^ *+' conftest.er1 >conftest.err
--  rm -f conftest.er1
--  cat conftest.err >&5
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); } && {
--	 test -z "$ac_c_werror_flag" ||
--	 test ! -s conftest.err
--       } && test -s conftest.$ac_objext; then
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+if ac_fn_c_try_compile "$LINENO"; then :
-   ac_compiler_gnu=yes
- else
--  $as_echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--	ac_compiler_gnu=no
-+  ac_compiler_gnu=no
- fi
--
- rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_cv_c_compiler_gnu=$ac_compiler_gnu
- 
- fi
--{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
- $as_echo "$ac_cv_c_compiler_gnu" >&6; }
- if test $ac_compiler_gnu = yes; then
-   GCC=yes
-@@ -3159,20 +3483,16 @@ else
- fi
- ac_test_CFLAGS=${CFLAGS+set}
- ac_save_CFLAGS=$CFLAGS
--{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
- $as_echo_n "checking whether $CC accepts -g... " >&6; }
--if test "${ac_cv_prog_cc_g+set}" = set; then
-+if test "${ac_cv_prog_cc_g+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   ac_save_c_werror_flag=$ac_c_werror_flag
-    ac_c_werror_flag=yes
-    ac_cv_prog_cc_g=no
-    CFLAGS="-g"
--   cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- 
- int
-@@ -3183,35 +3503,11 @@ main ()
-   return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext
--if { (ac_try="$ac_compile"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_compile") 2>conftest.er1
--  ac_status=$?
--  grep -v '^ *+' conftest.er1 >conftest.err
--  rm -f conftest.er1
--  cat conftest.err >&5
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); } && {
--	 test -z "$ac_c_werror_flag" ||
--	 test ! -s conftest.err
--       } && test -s conftest.$ac_objext; then
-+if ac_fn_c_try_compile "$LINENO"; then :
-   ac_cv_prog_cc_g=yes
- else
--  $as_echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--	CFLAGS=""
--      cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+  CFLAGS=""
-+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- 
- int
-@@ -3222,36 +3518,12 @@ main ()
-   return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext
--if { (ac_try="$ac_compile"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_compile") 2>conftest.er1
--  ac_status=$?
--  grep -v '^ *+' conftest.er1 >conftest.err
--  rm -f conftest.er1
--  cat conftest.err >&5
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); } && {
--	 test -z "$ac_c_werror_flag" ||
--	 test ! -s conftest.err
--       } && test -s conftest.$ac_objext; then
--  :
--else
--  $as_echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
-+if ac_fn_c_try_compile "$LINENO"; then :
- 
--	ac_c_werror_flag=$ac_save_c_werror_flag
-+else
-+  ac_c_werror_flag=$ac_save_c_werror_flag
- 	 CFLAGS="-g"
--	 cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- 
- int
-@@ -3262,42 +3534,17 @@ main ()
-   return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext
--if { (ac_try="$ac_compile"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_compile") 2>conftest.er1
--  ac_status=$?
--  grep -v '^ *+' conftest.er1 >conftest.err
--  rm -f conftest.er1
--  cat conftest.err >&5
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); } && {
--	 test -z "$ac_c_werror_flag" ||
--	 test ! -s conftest.err
--       } && test -s conftest.$ac_objext; then
-+if ac_fn_c_try_compile "$LINENO"; then :
-   ac_cv_prog_cc_g=yes
--else
--  $as_echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--
- fi
--
- rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
--
- rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
--
- rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-    ac_c_werror_flag=$ac_save_c_werror_flag
- fi
--{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
- $as_echo "$ac_cv_prog_cc_g" >&6; }
- if test "$ac_test_CFLAGS" = set; then
-   CFLAGS=$ac_save_CFLAGS
-@@ -3314,18 +3561,14 @@ else
-     CFLAGS=
-   fi
- fi
--{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
- $as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
--if test "${ac_cv_prog_cc_c89+set}" = set; then
-+if test "${ac_cv_prog_cc_c89+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   ac_cv_prog_cc_c89=no
- ac_save_CC=$CC
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- #include <stdarg.h>
- #include <stdio.h>
-@@ -3382,32 +3625,9 @@ for ac_arg in '' -qlanglvl=extc89 -qlang
- 	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
- do
-   CC="$ac_save_CC $ac_arg"
--  rm -f conftest.$ac_objext
--if { (ac_try="$ac_compile"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_compile") 2>conftest.er1
--  ac_status=$?
--  grep -v '^ *+' conftest.er1 >conftest.err
--  rm -f conftest.er1
--  cat conftest.err >&5
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); } && {
--	 test -z "$ac_c_werror_flag" ||
--	 test ! -s conftest.err
--       } && test -s conftest.$ac_objext; then
-+  if ac_fn_c_try_compile "$LINENO"; then :
-   ac_cv_prog_cc_c89=$ac_arg
--else
--  $as_echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--
- fi
--
- rm -f core conftest.err conftest.$ac_objext
-   test "x$ac_cv_prog_cc_c89" != "xno" && break
- done
-@@ -3418,17 +3638,19 @@ fi
- # AC_CACHE_VAL
- case "x$ac_cv_prog_cc_c89" in
-   x)
--    { $as_echo "$as_me:$LINENO: result: none needed" >&5
-+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
- $as_echo "none needed" >&6; } ;;
-   xno)
--    { $as_echo "$as_me:$LINENO: result: unsupported" >&5
-+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
- $as_echo "unsupported" >&6; } ;;
-   *)
-     CC="$CC $ac_cv_prog_cc_c89"
--    { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
- $as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
- esac
-+if test "x$ac_cv_prog_cc_c89" != xno; then :
- 
-+fi
- 
- ac_ext=c
- ac_cpp='$CPP $CPPFLAGS'
-@@ -3438,9 +3660,9 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
- 
- depcc="$CC"   am_compiler_list=
- 
--{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
- $as_echo_n "checking dependency style of $depcc... " >&6; }
--if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
-+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-@@ -3510,259 +3732,57 @@ else
-       ;;
-     msvisualcpp | msvcmsys)
-       # This compiler won't grok `-c -o', but also, the minuso test has
--      # not run yet.  These depmodes are late enough in the game, and
--      # so weak that their functioning should not be impacted.
--      am__obj=conftest.${OBJEXT-o}
--      am__minus_obj=
--      ;;
--    none) break ;;
--    esac
--    if depmode=$depmode \
--       source=sub/conftest.c object=$am__obj \
--       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
--       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
--         >/dev/null 2>conftest.err &&
--       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
--       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
--       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
--       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
--      # icc doesn't choke on unknown options, it will just issue warnings
--      # or remarks (even with -Werror).  So we grep stderr for any message
--      # that says an option was ignored or not supported.
--      # When given -MP, icc 7.0 and 7.1 complain thusly:
--      #   icc: Command line warning: ignoring option '-M'; no argument required
--      # The diagnosis changed in icc 8.0:
--      #   icc: Command line remark: option '-MP' not supported
--      if (grep 'ignoring option' conftest.err ||
--          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
--        am_cv_CC_dependencies_compiler_type=$depmode
--        break
--      fi
--    fi
--  done
--
--  cd ..
--  rm -rf conftest.dir
--else
--  am_cv_CC_dependencies_compiler_type=none
--fi
--
--fi
--{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
--$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
--CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
--
-- if
--  test "x$enable_dependency_tracking" != xno \
--  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
--  am__fastdepCC_TRUE=
--  am__fastdepCC_FALSE='#'
--else
--  am__fastdepCC_TRUE='#'
--  am__fastdepCC_FALSE=
--fi
--
--
--   { $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C99" >&5
--$as_echo_n "checking for $CC option to accept ISO C99... " >&6; }
--if test "${ac_cv_prog_cc_c99+set}" = set; then
--  $as_echo_n "(cached) " >&6
--else
--  ac_cv_prog_cc_c99=no
--ac_save_CC=$CC
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h.  */
--#include <stdarg.h>
--#include <stdbool.h>
--#include <stdlib.h>
--#include <wchar.h>
--#include <stdio.h>
--
--// Check varargs macros.  These examples are taken from C99 6.10.3.5.
--#define debug(...) fprintf (stderr, __VA_ARGS__)
--#define showlist(...) puts (#__VA_ARGS__)
--#define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__))
--static void
--test_varargs_macros (void)
--{
--  int x = 1234;
--  int y = 5678;
--  debug ("Flag");
--  debug ("X = %d\n", x);
--  showlist (The first, second, and third items.);
--  report (x>y, "x is %d but y is %d", x, y);
--}
--
--// Check long long types.
--#define BIG64 18446744073709551615ull
--#define BIG32 4294967295ul
--#define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0)
--#if !BIG_OK
--  your preprocessor is broken;
--#endif
--#if BIG_OK
--#else
--  your preprocessor is broken;
--#endif
--static long long int bignum = -9223372036854775807LL;
--static unsigned long long int ubignum = BIG64;
--
--struct incomplete_array
--{
--  int datasize;
--  double data[];
--};
--
--struct named_init {
--  int number;
--  const wchar_t *name;
--  double average;
--};
--
--typedef const char *ccp;
--
--static inline int
--test_restrict (ccp restrict text)
--{
--  // See if C++-style comments work.
--  // Iterate through items via the restricted pointer.
--  // Also check for declarations in for loops.
--  for (unsigned int i = 0; *(text+i) != '\0'; ++i)
--    continue;
--  return 0;
--}
--
--// Check varargs and va_copy.
--static void
--test_varargs (const char *format, ...)
--{
--  va_list args;
--  va_start (args, format);
--  va_list args_copy;
--  va_copy (args_copy, args);
--
--  const char *str;
--  int number;
--  float fnumber;
--
--  while (*format)
--    {
--      switch (*format++)
--	{
--	case 's': // string
--	  str = va_arg (args_copy, const char *);
--	  break;
--	case 'd': // int
--	  number = va_arg (args_copy, int);
--	  break;
--	case 'f': // float
--	  fnumber = va_arg (args_copy, double);
--	  break;
--	default:
--	  break;
--	}
--    }
--  va_end (args_copy);
--  va_end (args);
--}
--
--int
--main ()
--{
--
--  // Check bool.
--  _Bool success = false;
--
--  // Check restrict.
--  if (test_restrict ("String literal") == 0)
--    success = true;
--  char *restrict newvar = "Another string";
--
--  // Check varargs.
--  test_varargs ("s, d' f .", "string", 65, 34.234);
--  test_varargs_macros ();
--
--  // Check flexible array members.
--  struct incomplete_array *ia =
--    malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10));
--  ia->datasize = 10;
--  for (int i = 0; i < ia->datasize; ++i)
--    ia->data[i] = i * 1.234;
--
--  // Check named initializers.
--  struct named_init ni = {
--    .number = 34,
--    .name = L"Test wide string",
--    .average = 543.34343,
--  };
--
--  ni.number = 58;
--
--  int dynamic_array[ni.number];
--  dynamic_array[ni.number - 1] = 543;
--
--  // work around unused variable warnings
--  return (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == 'x'
--	  || dynamic_array[ni.number - 1] != 543);
-+      # not run yet.  These depmodes are late enough in the game, and
-+      # so weak that their functioning should not be impacted.
-+      am__obj=conftest.${OBJEXT-o}
-+      am__minus_obj=
-+      ;;
-+    none) break ;;
-+    esac
-+    if depmode=$depmode \
-+       source=sub/conftest.c object=$am__obj \
-+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
-+         >/dev/null 2>conftest.err &&
-+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
-+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-+      # icc doesn't choke on unknown options, it will just issue warnings
-+      # or remarks (even with -Werror).  So we grep stderr for any message
-+      # that says an option was ignored or not supported.
-+      # When given -MP, icc 7.0 and 7.1 complain thusly:
-+      #   icc: Command line warning: ignoring option '-M'; no argument required
-+      # The diagnosis changed in icc 8.0:
-+      #   icc: Command line remark: option '-MP' not supported
-+      if (grep 'ignoring option' conftest.err ||
-+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-+        am_cv_CC_dependencies_compiler_type=$depmode
-+        break
-+      fi
-+    fi
-+  done
- 
--  ;
--  return 0;
--}
--_ACEOF
--for ac_arg in '' -std=gnu99 -std=c99 -c99 -AC99 -xc99=all -qlanglvl=extc99
--do
--  CC="$ac_save_CC $ac_arg"
--  rm -f conftest.$ac_objext
--if { (ac_try="$ac_compile"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_compile") 2>conftest.er1
--  ac_status=$?
--  grep -v '^ *+' conftest.er1 >conftest.err
--  rm -f conftest.er1
--  cat conftest.err >&5
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); } && {
--	 test -z "$ac_c_werror_flag" ||
--	 test ! -s conftest.err
--       } && test -s conftest.$ac_objext; then
--  ac_cv_prog_cc_c99=$ac_arg
-+  cd ..
-+  rm -rf conftest.dir
- else
--  $as_echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--
-+  am_cv_CC_dependencies_compiler_type=none
- fi
- 
--rm -f core conftest.err conftest.$ac_objext
--  test "x$ac_cv_prog_cc_c99" != "xno" && break
--done
--rm -f conftest.$ac_ext
--CC=$ac_save_CC
--
- fi
--# AC_CACHE_VAL
--case "x$ac_cv_prog_cc_c99" in
--  x)
--    { $as_echo "$as_me:$LINENO: result: none needed" >&5
--$as_echo "none needed" >&6; } ;;
--  xno)
--    { $as_echo "$as_me:$LINENO: result: unsupported" >&5
--$as_echo "unsupported" >&6; } ;;
--  *)
--    CC="$CC $ac_cv_prog_cc_c99"
--    { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c99" >&5
--$as_echo "$ac_cv_prog_cc_c99" >&6; } ;;
--esac
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
-+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
-+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
- 
-+ if
-+  test "x$enable_dependency_tracking" != xno \
-+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
-+  am__fastdepCC_TRUE=
-+  am__fastdepCC_FALSE='#'
-+else
-+  am__fastdepCC_TRUE='#'
-+  am__fastdepCC_FALSE=
-+fi
- 
- 
- 
-@@ -3771,14 +3791,14 @@ ac_cpp='$CPP $CPPFLAGS'
- ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
- ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
- ac_compiler_gnu=$ac_cv_c_compiler_gnu
--{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
- $as_echo_n "checking how to run the C preprocessor... " >&6; }
- # On Suns, sometimes $CPP names a directory.
- if test -n "$CPP" && test -d "$CPP"; then
-   CPP=
- fi
- if test -z "$CPP"; then
--  if test "${ac_cv_prog_CPP+set}" = set; then
-+  if test "${ac_cv_prog_CPP+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-       # Double quotes because CPP needs to be expanded
-@@ -3793,11 +3813,7 @@ do
-   # <limits.h> exists even on freestanding compilers.
-   # On the NeXT, cc -E runs the code through the compiler's parser,
-   # not just through cpp. "Syntax error" is here to catch this case.
--  cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- #ifdef __STDC__
- # include <limits.h>
-@@ -3806,78 +3822,34 @@ cat >>conftest.$ac_ext <<_ACEOF
- #endif
- 		     Syntax error
- _ACEOF
--if { (ac_try="$ac_cpp conftest.$ac_ext"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
--  ac_status=$?
--  grep -v '^ *+' conftest.er1 >conftest.err
--  rm -f conftest.er1
--  cat conftest.err >&5
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); } >/dev/null && {
--	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
--	 test ! -s conftest.err
--       }; then
--  :
--else
--  $as_echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
-+if ac_fn_c_try_cpp "$LINENO"; then :
- 
-+else
-   # Broken: fails on valid input.
- continue
- fi
--
- rm -f conftest.err conftest.$ac_ext
- 
-   # OK, works on sane cases.  Now check whether nonexistent headers
-   # can be detected and how.
--  cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- #include <ac_nonexistent.h>
- _ACEOF
--if { (ac_try="$ac_cpp conftest.$ac_ext"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
--  ac_status=$?
--  grep -v '^ *+' conftest.er1 >conftest.err
--  rm -f conftest.er1
--  cat conftest.err >&5
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); } >/dev/null && {
--	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
--	 test ! -s conftest.err
--       }; then
-+if ac_fn_c_try_cpp "$LINENO"; then :
-   # Broken: success on invalid input.
- continue
- else
--  $as_echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
-   # Passes both tests.
- ac_preproc_ok=:
- break
- fi
--
- rm -f conftest.err conftest.$ac_ext
- 
- done
- # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
- rm -f conftest.err conftest.$ac_ext
--if $ac_preproc_ok; then
-+if $ac_preproc_ok; then :
-   break
- fi
- 
-@@ -3889,7 +3861,7 @@ fi
- else
-   ac_cv_prog_CPP=$CPP
- fi
--{ $as_echo "$as_me:$LINENO: result: $CPP" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
- $as_echo "$CPP" >&6; }
- ac_preproc_ok=false
- for ac_c_preproc_warn_flag in '' yes
-@@ -3900,11 +3872,7 @@ do
-   # <limits.h> exists even on freestanding compilers.
-   # On the NeXT, cc -E runs the code through the compiler's parser,
-   # not just through cpp. "Syntax error" is here to catch this case.
--  cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- #ifdef __STDC__
- # include <limits.h>
-@@ -3913,87 +3881,40 @@ cat >>conftest.$ac_ext <<_ACEOF
- #endif
- 		     Syntax error
- _ACEOF
--if { (ac_try="$ac_cpp conftest.$ac_ext"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
--  ac_status=$?
--  grep -v '^ *+' conftest.er1 >conftest.err
--  rm -f conftest.er1
--  cat conftest.err >&5
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); } >/dev/null && {
--	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
--	 test ! -s conftest.err
--       }; then
--  :
--else
--  $as_echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
-+if ac_fn_c_try_cpp "$LINENO"; then :
- 
-+else
-   # Broken: fails on valid input.
- continue
- fi
--
- rm -f conftest.err conftest.$ac_ext
- 
-   # OK, works on sane cases.  Now check whether nonexistent headers
-   # can be detected and how.
--  cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- #include <ac_nonexistent.h>
- _ACEOF
--if { (ac_try="$ac_cpp conftest.$ac_ext"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
--  ac_status=$?
--  grep -v '^ *+' conftest.er1 >conftest.err
--  rm -f conftest.er1
--  cat conftest.err >&5
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); } >/dev/null && {
--	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
--	 test ! -s conftest.err
--       }; then
-+if ac_fn_c_try_cpp "$LINENO"; then :
-   # Broken: success on invalid input.
- continue
- else
--  $as_echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
-   # Passes both tests.
- ac_preproc_ok=:
- break
- fi
--
- rm -f conftest.err conftest.$ac_ext
- 
- done
- # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
- rm -f conftest.err conftest.$ac_ext
--if $ac_preproc_ok; then
--  :
-+if $ac_preproc_ok; then :
-+
- else
--  { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
- $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
--{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
--See \`config.log' for more details." >&5
--$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
--See \`config.log' for more details." >&2;}
--   { (exit 1); exit 1; }; }; }
-+as_fn_error "C preprocessor \"$CPP\" fails sanity check
-+See \`config.log' for more details." "$LINENO" 5; }
- fi
- 
- ac_ext=c
-@@ -4003,9 +3924,9 @@ ac_link='$CC -o conftest$ac_exeext $CFLA
- ac_compiler_gnu=$ac_cv_c_compiler_gnu
- 
- 
--{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
- $as_echo_n "checking for grep that handles long lines and -e... " >&6; }
--if test "${ac_cv_path_GREP+set}" = set; then
-+if test "${ac_cv_path_GREP+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -z "$GREP"; then
-@@ -4016,7 +3937,7 @@ for as_dir in $PATH$PATH_SEPARATOR/usr/x
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
--  for ac_prog in grep ggrep; do
-+    for ac_prog in grep ggrep; do
-     for ac_exec_ext in '' $ac_executable_extensions; do
-       ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-       { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
-@@ -4036,7 +3957,7 @@ case `"$ac_path_GREP" --version 2>&1` in
-     $as_echo 'GREP' >> "conftest.nl"
-     "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-     diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
--    ac_count=`expr $ac_count + 1`
-+    as_fn_arith $ac_count + 1 && ac_count=$as_val
-     if test $ac_count -gt ${ac_path_GREP_max-0}; then
-       # Best one so far, save it but keep looking for a better one
-       ac_cv_path_GREP="$ac_path_GREP"
-@@ -4051,26 +3972,24 @@ esac
-       $ac_path_GREP_found && break 3
-     done
-   done
--done
-+  done
- IFS=$as_save_IFS
-   if test -z "$ac_cv_path_GREP"; then
--    { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
--$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
--   { (exit 1); exit 1; }; }
-+    as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
-   fi
- else
-   ac_cv_path_GREP=$GREP
- fi
- 
- fi
--{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
- $as_echo "$ac_cv_path_GREP" >&6; }
-  GREP="$ac_cv_path_GREP"
- 
- 
--{ $as_echo "$as_me:$LINENO: checking for egrep" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
- $as_echo_n "checking for egrep... " >&6; }
--if test "${ac_cv_path_EGREP+set}" = set; then
-+if test "${ac_cv_path_EGREP+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
-@@ -4084,7 +4003,7 @@ for as_dir in $PATH$PATH_SEPARATOR/usr/x
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
--  for ac_prog in egrep; do
-+    for ac_prog in egrep; do
-     for ac_exec_ext in '' $ac_executable_extensions; do
-       ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-       { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
-@@ -4104,7 +4023,7 @@ case `"$ac_path_EGREP" --version 2>&1` i
-     $as_echo 'EGREP' >> "conftest.nl"
-     "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-     diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
--    ac_count=`expr $ac_count + 1`
-+    as_fn_arith $ac_count + 1 && ac_count=$as_val
-     if test $ac_count -gt ${ac_path_EGREP_max-0}; then
-       # Best one so far, save it but keep looking for a better one
-       ac_cv_path_EGREP="$ac_path_EGREP"
-@@ -4119,12 +4038,10 @@ esac
-       $ac_path_EGREP_found && break 3
-     done
-   done
--done
-+  done
- IFS=$as_save_IFS
-   if test -z "$ac_cv_path_EGREP"; then
--    { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
--$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
--   { (exit 1); exit 1; }; }
-+    as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
-   fi
- else
-   ac_cv_path_EGREP=$EGREP
-@@ -4132,21 +4049,17 @@ fi
- 
-    fi
- fi
--{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
- $as_echo "$ac_cv_path_EGREP" >&6; }
-  EGREP="$ac_cv_path_EGREP"
- 
- 
--{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
- $as_echo_n "checking for ANSI C header files... " >&6; }
--if test "${ac_cv_header_stdc+set}" = set; then
-+if test "${ac_cv_header_stdc+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
--  cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- #include <stdlib.h>
- #include <stdarg.h>
-@@ -4161,48 +4074,23 @@ main ()
-   return 0;
- }
- _ACEOF
--rm -f conftest.$ac_objext
--if { (ac_try="$ac_compile"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_compile") 2>conftest.er1
--  ac_status=$?
--  grep -v '^ *+' conftest.er1 >conftest.err
--  rm -f conftest.er1
--  cat conftest.err >&5
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); } && {
--	 test -z "$ac_c_werror_flag" ||
--	 test ! -s conftest.err
--       } && test -s conftest.$ac_objext; then
-+if ac_fn_c_try_compile "$LINENO"; then :
-   ac_cv_header_stdc=yes
- else
--  $as_echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--	ac_cv_header_stdc=no
-+  ac_cv_header_stdc=no
- fi
--
- rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- 
- if test $ac_cv_header_stdc = yes; then
-   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
--  cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- #include <string.h>
- 
- _ACEOF
- if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
--  $EGREP "memchr" >/dev/null 2>&1; then
--  :
-+  $EGREP "memchr" >/dev/null 2>&1; then :
-+
- else
-   ac_cv_header_stdc=no
- fi
-@@ -4212,18 +4100,14 @@ fi
- 
- if test $ac_cv_header_stdc = yes; then
-   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
--  cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- #include <stdlib.h>
- 
- _ACEOF
- if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
--  $EGREP "free" >/dev/null 2>&1; then
--  :
-+  $EGREP "free" >/dev/null 2>&1; then :
-+
- else
-   ac_cv_header_stdc=no
- fi
-@@ -4233,14 +4117,10 @@ fi
- 
- if test $ac_cv_header_stdc = yes; then
-   # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
--  if test "$cross_compiling" = yes; then
-+  if test "$cross_compiling" = yes; then :
-   :
- else
--  cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
-+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- #include <ctype.h>
- #include <stdlib.h>
-@@ -4267,126 +4147,219 @@ main ()
-   return 0;
- }
- _ACEOF
--rm -f conftest$ac_exeext
--if { (ac_try="$ac_link"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_link") 2>&5
--  ac_status=$?
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
--  { (case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_try") 2>&5
--  ac_status=$?
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); }; }; then
--  :
--else
--  $as_echo "$as_me: program exited with status $ac_status" >&5
--$as_echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
-+if ac_fn_c_try_run "$LINENO"; then :
- 
--( exit $ac_status )
--ac_cv_header_stdc=no
-+else
-+  ac_cv_header_stdc=no
- fi
--rm -rf conftest.dSYM
--rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-+  conftest.$ac_objext conftest.beam conftest.$ac_ext
- fi
- 
--
- fi
- fi
--{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
- $as_echo "$ac_cv_header_stdc" >&6; }
- if test $ac_cv_header_stdc = yes; then
- 
--cat >>confdefs.h <<\_ACEOF
--#define STDC_HEADERS 1
--_ACEOF
-+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
-+
-+fi
-+
-+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-+		  inttypes.h stdint.h unistd.h
-+do :
-+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
-+"
-+eval as_val=\$$as_ac_Header
-+   if test "x$as_val" = x""yes; then :
-+  cat >>confdefs.h <<_ACEOF
-+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+
-+   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C99" >&5
-+$as_echo_n "checking for $CC option to accept ISO C99... " >&6; }
-+if test "${ac_cv_prog_cc_c99+set}" = set; then :
-+  $as_echo_n "(cached) " >&6
-+else
-+  ac_cv_prog_cc_c99=no
-+ac_save_CC=$CC
-+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+/* end confdefs.h.  */
-+#include <stdarg.h>
-+#include <stdbool.h>
-+#include <stdlib.h>
-+#include <wchar.h>
-+#include <stdio.h>
-+
-+// Check varargs macros.  These examples are taken from C99 6.10.3.5.
-+#define debug(...) fprintf (stderr, __VA_ARGS__)
-+#define showlist(...) puts (#__VA_ARGS__)
-+#define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__))
-+static void
-+test_varargs_macros (void)
-+{
-+  int x = 1234;
-+  int y = 5678;
-+  debug ("Flag");
-+  debug ("X = %d\n", x);
-+  showlist (The first, second, and third items.);
-+  report (x>y, "x is %d but y is %d", x, y);
-+}
-+
-+// Check long long types.
-+#define BIG64 18446744073709551615ull
-+#define BIG32 4294967295ul
-+#define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0)
-+#if !BIG_OK
-+  your preprocessor is broken;
-+#endif
-+#if BIG_OK
-+#else
-+  your preprocessor is broken;
-+#endif
-+static long long int bignum = -9223372036854775807LL;
-+static unsigned long long int ubignum = BIG64;
-+
-+struct incomplete_array
-+{
-+  int datasize;
-+  double data[];
-+};
-+
-+struct named_init {
-+  int number;
-+  const wchar_t *name;
-+  double average;
-+};
-+
-+typedef const char *ccp;
-+
-+static inline int
-+test_restrict (ccp restrict text)
-+{
-+  // See if C++-style comments work.
-+  // Iterate through items via the restricted pointer.
-+  // Also check for declarations in for loops.
-+  for (unsigned int i = 0; *(text+i) != '\0'; ++i)
-+    continue;
-+  return 0;
-+}
-+
-+// Check varargs and va_copy.
-+static void
-+test_varargs (const char *format, ...)
-+{
-+  va_list args;
-+  va_start (args, format);
-+  va_list args_copy;
-+  va_copy (args_copy, args);
- 
--fi
-+  const char *str;
-+  int number;
-+  float fnumber;
- 
--# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-+  while (*format)
-+    {
-+      switch (*format++)
-+	{
-+	case 's': // string
-+	  str = va_arg (args_copy, const char *);
-+	  break;
-+	case 'd': // int
-+	  number = va_arg (args_copy, int);
-+	  break;
-+	case 'f': // float
-+	  fnumber = va_arg (args_copy, double);
-+	  break;
-+	default:
-+	  break;
-+	}
-+    }
-+  va_end (args_copy);
-+  va_end (args);
-+}
- 
-+int
-+main ()
-+{
- 
-+  // Check bool.
-+  _Bool success = false;
- 
-+  // Check restrict.
-+  if (test_restrict ("String literal") == 0)
-+    success = true;
-+  char *restrict newvar = "Another string";
- 
-+  // Check varargs.
-+  test_varargs ("s, d' f .", "string", 65, 34.234);
-+  test_varargs_macros ();
- 
-+  // Check flexible array members.
-+  struct incomplete_array *ia =
-+    malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10));
-+  ia->datasize = 10;
-+  for (int i = 0; i < ia->datasize; ++i)
-+    ia->data[i] = i * 1.234;
- 
-+  // Check named initializers.
-+  struct named_init ni = {
-+    .number = 34,
-+    .name = L"Test wide string",
-+    .average = 543.34343,
-+  };
- 
-+  ni.number = 58;
- 
-+  int dynamic_array[ni.number];
-+  dynamic_array[ni.number - 1] = 543;
- 
--for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
--		  inttypes.h stdint.h unistd.h
--do
--as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
--{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
--$as_echo_n "checking for $ac_header... " >&6; }
--if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
--  $as_echo_n "(cached) " >&6
--else
--  cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h.  */
--$ac_includes_default
-+  // work around unused variable warnings
-+  return (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == 'x'
-+	  || dynamic_array[ni.number - 1] != 543);
- 
--#include <$ac_header>
-+  ;
-+  return 0;
-+}
- _ACEOF
--rm -f conftest.$ac_objext
--if { (ac_try="$ac_compile"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_compile") 2>conftest.er1
--  ac_status=$?
--  grep -v '^ *+' conftest.er1 >conftest.err
--  rm -f conftest.er1
--  cat conftest.err >&5
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); } && {
--	 test -z "$ac_c_werror_flag" ||
--	 test ! -s conftest.err
--       } && test -s conftest.$ac_objext; then
--  eval "$as_ac_Header=yes"
--else
--  $as_echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--	eval "$as_ac_Header=no"
-+for ac_arg in '' -std=gnu99 -std=c99 -c99 -AC99 -xc99=all -qlanglvl=extc99
-+do
-+  CC="$ac_save_CC $ac_arg"
-+  if ac_fn_c_try_compile "$LINENO"; then :
-+  ac_cv_prog_cc_c99=$ac_arg
- fi
-+rm -f core conftest.err conftest.$ac_objext
-+  test "x$ac_cv_prog_cc_c99" != "xno" && break
-+done
-+rm -f conftest.$ac_ext
-+CC=$ac_save_CC
- 
--rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
--ac_res=`eval 'as_val=${'$as_ac_Header'}
--		 $as_echo "$as_val"'`
--	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
--$as_echo "$ac_res" >&6; }
--as_val=`eval 'as_val=${'$as_ac_Header'}
--		 $as_echo "$as_val"'`
--   if test "x$as_val" = x""yes; then
--  cat >>confdefs.h <<_ACEOF
--#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
--_ACEOF
-+# AC_CACHE_VAL
-+case "x$ac_cv_prog_cc_c99" in
-+  x)
-+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-+$as_echo "none needed" >&6; } ;;
-+  xno)
-+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-+$as_echo "unsupported" >&6; } ;;
-+  *)
-+    CC="$CC $ac_cv_prog_cc_c99"
-+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5
-+$as_echo "$ac_cv_prog_cc_c99" >&6; } ;;
-+esac
-+if test "x$ac_cv_prog_cc_c99" != xno; then :
- 
- fi
- 
--done
--
- 
- 
- 
-@@ -4394,9 +4367,9 @@ if test "x$ac_cv_env_PKG_CONFIG_set" != 
- 	if test -n "$ac_tool_prefix"; then
-   # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
- set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
--{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
--if test "${ac_cv_path_PKG_CONFIG+set}" = set; then
-+if test "${ac_cv_path_PKG_CONFIG+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   case $PKG_CONFIG in
-@@ -4409,14 +4382,14 @@ for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
--  for ac_exec_ext in '' $ac_executable_extensions; do
-+    for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
--    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
--done
-+  done
- IFS=$as_save_IFS
- 
-   ;;
-@@ -4424,10 +4397,10 @@ esac
- fi
- PKG_CONFIG=$ac_cv_path_PKG_CONFIG
- if test -n "$PKG_CONFIG"; then
--  { $as_echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5
- $as_echo "$PKG_CONFIG" >&6; }
- else
--  { $as_echo "$as_me:$LINENO: result: no" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
- 
-@@ -4437,9 +4410,9 @@ if test -z "$ac_cv_path_PKG_CONFIG"; the
-   ac_pt_PKG_CONFIG=$PKG_CONFIG
-   # Extract the first word of "pkg-config", so it can be a program name with args.
- set dummy pkg-config; ac_word=$2
--{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
--if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then
-+if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   case $ac_pt_PKG_CONFIG in
-@@ -4452,14 +4425,14 @@ for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
--  for ac_exec_ext in '' $ac_executable_extensions; do
-+    for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
--    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
--done
-+  done
- IFS=$as_save_IFS
- 
-   ;;
-@@ -4467,10 +4440,10 @@ esac
- fi
- ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
- if test -n "$ac_pt_PKG_CONFIG"; then
--  { $as_echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5
- $as_echo "$ac_pt_PKG_CONFIG" >&6; }
- else
--  { $as_echo "$as_me:$LINENO: result: no" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
- 
-@@ -4479,7 +4452,7 @@ fi
-   else
-     case $cross_compiling:$ac_tool_warned in
- yes:)
--{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
- $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
- ac_tool_warned=yes ;;
- esac
-@@ -4492,13 +4465,13 @@ fi
- fi
- if test -n "$PKG_CONFIG"; then
- 	_pkg_min_version=0.9.0
--	{ $as_echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5
-+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
- $as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
- 	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
--		{ $as_echo "$as_me:$LINENO: result: yes" >&5
-+		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
- $as_echo "yes" >&6; }
- 	else
--		{ $as_echo "$as_me:$LINENO: result: no" >&5
-+		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- 		PKG_CONFIG=""
- 	fi
-@@ -4506,35 +4479,27 @@ $as_echo "no" >&6; }
- fi
- # Make sure we can run config.sub.
- $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
--  { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
--$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
--   { (exit 1); exit 1; }; }
-+  as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
- 
--{ $as_echo "$as_me:$LINENO: checking build system type" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
- $as_echo_n "checking build system type... " >&6; }
--if test "${ac_cv_build+set}" = set; then
-+if test "${ac_cv_build+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   ac_build_alias=$build_alias
- test "x$ac_build_alias" = x &&
-   ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
- test "x$ac_build_alias" = x &&
--  { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
--$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
--   { (exit 1); exit 1; }; }
-+  as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
- ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
--  { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
--$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
--   { (exit 1); exit 1; }; }
-+  as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
- 
- fi
--{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
- $as_echo "$ac_cv_build" >&6; }
- case $ac_cv_build in
- *-*-*) ;;
--*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
--$as_echo "$as_me: error: invalid value of canonical build" >&2;}
--   { (exit 1); exit 1; }; };;
-+*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
- esac
- build=$ac_cv_build
- ac_save_IFS=$IFS; IFS='-'
-@@ -4550,28 +4515,24 @@ IFS=$ac_save_IFS
- case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
- 
- 
--{ $as_echo "$as_me:$LINENO: checking host system type" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
- $as_echo_n "checking host system type... " >&6; }
--if test "${ac_cv_host+set}" = set; then
-+if test "${ac_cv_host+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test "x$host_alias" = x; then
-   ac_cv_host=$ac_cv_build
- else
-   ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
--    { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
--$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
--   { (exit 1); exit 1; }; }
-+    as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
- fi
- 
- fi
--{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
- $as_echo "$ac_cv_host" >&6; }
- case $ac_cv_host in
- *-*-*) ;;
--*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
--$as_echo "$as_me: error: invalid value of canonical host" >&2;}
--   { (exit 1); exit 1; }; };;
-+*) as_fn_error "invalid value of canonical host" "$LINENO" 5;;
- esac
- host=$ac_cv_host
- ac_save_IFS=$IFS; IFS='-'
-@@ -4587,78 +4548,6 @@ IFS=$ac_save_IFS
- case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
- 
- 
--{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
--$as_echo_n "checking for a sed that does not truncate output... " >&6; }
--if test "${ac_cv_path_SED+set}" = set; then
--  $as_echo_n "(cached) " >&6
--else
--            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
--     for ac_i in 1 2 3 4 5 6 7; do
--       ac_script="$ac_script$as_nl$ac_script"
--     done
--     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
--     $as_unset ac_script || ac_script=
--     if test -z "$SED"; then
--  ac_path_SED_found=false
--  # Loop through the user's path and test for each of PROGNAME-LIST
--  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
--  IFS=$as_save_IFS
--  test -z "$as_dir" && as_dir=.
--  for ac_prog in sed gsed; do
--    for ac_exec_ext in '' $ac_executable_extensions; do
--      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
--      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
--# Check for GNU ac_path_SED and select it if it is found.
--  # Check for GNU $ac_path_SED
--case `"$ac_path_SED" --version 2>&1` in
--*GNU*)
--  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
--*)
--  ac_count=0
--  $as_echo_n 0123456789 >"conftest.in"
--  while :
--  do
--    cat "conftest.in" "conftest.in" >"conftest.tmp"
--    mv "conftest.tmp" "conftest.in"
--    cp "conftest.in" "conftest.nl"
--    $as_echo '' >> "conftest.nl"
--    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
--    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
--    ac_count=`expr $ac_count + 1`
--    if test $ac_count -gt ${ac_path_SED_max-0}; then
--      # Best one so far, save it but keep looking for a better one
--      ac_cv_path_SED="$ac_path_SED"
--      ac_path_SED_max=$ac_count
--    fi
--    # 10*(2^10) chars as input seems more than enough
--    test $ac_count -gt 10 && break
--  done
--  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
--esac
--
--      $ac_path_SED_found && break 3
--    done
--  done
--done
--IFS=$as_save_IFS
--  if test -z "$ac_cv_path_SED"; then
--    { { $as_echo "$as_me:$LINENO: error: no acceptable sed could be found in \$PATH" >&5
--$as_echo "$as_me: error: no acceptable sed could be found in \$PATH" >&2;}
--   { (exit 1); exit 1; }; }
--  fi
--else
--  ac_cv_path_SED=$SED
--fi
--
--fi
--{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5
--$as_echo "$ac_cv_path_SED" >&6; }
-- SED="$ac_cv_path_SED"
--  rm -f conftest.sed
--
--
- 
- 
- 
-@@ -4672,60 +4561,8 @@ if  test "x$GCC" = xyes ; then
- 	;;
-     esac
- else
--    { $as_echo "$as_me:$LINENO: checking whether __SUNPRO_C is declared" >&5
--$as_echo_n "checking whether __SUNPRO_C is declared... " >&6; }
--if test "${ac_cv_have_decl___SUNPRO_C+set}" = set; then
--  $as_echo_n "(cached) " >&6
--else
--  cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h.  */
--$ac_includes_default
--int
--main ()
--{
--#ifndef __SUNPRO_C
--  (void) __SUNPRO_C;
--#endif
--
--  ;
--  return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext
--if { (ac_try="$ac_compile"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_compile") 2>conftest.er1
--  ac_status=$?
--  grep -v '^ *+' conftest.er1 >conftest.err
--  rm -f conftest.er1
--  cat conftest.err >&5
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); } && {
--	 test -z "$ac_c_werror_flag" ||
--	 test ! -s conftest.err
--       } && test -s conftest.$ac_objext; then
--  ac_cv_have_decl___SUNPRO_C=yes
--else
--  $as_echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--	ac_cv_have_decl___SUNPRO_C=no
--fi
--
--rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
--fi
--{ $as_echo "$as_me:$LINENO: result: $ac_cv_have_decl___SUNPRO_C" >&5
--$as_echo "$ac_cv_have_decl___SUNPRO_C" >&6; }
--if test "x$ac_cv_have_decl___SUNPRO_C" = x""yes; then
-+    ac_fn_c_check_decl "$LINENO" "__SUNPRO_C" "ac_cv_have_decl___SUNPRO_C" "$ac_includes_default"
-+if test "x$ac_cv_have_decl___SUNPRO_C" = x""yes; then :
-   SUNCC="yes"
- else
-   SUNCC="no"
-@@ -4734,135 +4571,31 @@ fi
-     if test "x$SUNCC" = "xyes"; then
- 	CWARNFLAGS="-v"
-     fi
--fi
--
--
--
--# If the module's configure.ac calls AC_PROG_CC later on, CC gets set to C89
--
--
--
--# Check whether --enable-strict-compilation was given.
--if test "${enable_strict_compilation+set}" = set; then
--  enableval=$enable_strict_compilation; STRICT_COMPILE=$enableval
--else
--  STRICT_COMPILE=no
--fi
--
--if test "x$STRICT_COMPILE" = "xyes"; then
--	{ $as_echo "$as_me:$LINENO: checking whether __SUNPRO_C is declared" >&5
--$as_echo_n "checking whether __SUNPRO_C is declared... " >&6; }
--if test "${ac_cv_have_decl___SUNPRO_C+set}" = set; then
--  $as_echo_n "(cached) " >&6
--else
--  cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h.  */
--$ac_includes_default
--int
--main ()
--{
--#ifndef __SUNPRO_C
--  (void) __SUNPRO_C;
--#endif
--
--  ;
--  return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext
--if { (ac_try="$ac_compile"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_compile") 2>conftest.er1
--  ac_status=$?
--  grep -v '^ *+' conftest.er1 >conftest.err
--  rm -f conftest.er1
--  cat conftest.err >&5
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); } && {
--	 test -z "$ac_c_werror_flag" ||
--	 test ! -s conftest.err
--       } && test -s conftest.$ac_objext; then
--  ac_cv_have_decl___SUNPRO_C=yes
--else
--  $as_echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--	ac_cv_have_decl___SUNPRO_C=no
--fi
--
--rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
--fi
--{ $as_echo "$as_me:$LINENO: result: $ac_cv_have_decl___SUNPRO_C" >&5
--$as_echo "$ac_cv_have_decl___SUNPRO_C" >&6; }
--if test "x$ac_cv_have_decl___SUNPRO_C" = x""yes; then
--  SUNCC="yes"
--else
--  SUNCC="no"
--fi
--
--	{ $as_echo "$as_me:$LINENO: checking whether __INTEL_COMPILER is declared" >&5
--$as_echo_n "checking whether __INTEL_COMPILER is declared... " >&6; }
--if test "${ac_cv_have_decl___INTEL_COMPILER+set}" = set; then
--  $as_echo_n "(cached) " >&6
--else
--  cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h.  */
--$ac_includes_default
--int
--main ()
--{
--#ifndef __INTEL_COMPILER
--  (void) __INTEL_COMPILER;
--#endif
--
--  ;
--  return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext
--if { (ac_try="$ac_compile"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_compile") 2>conftest.er1
--  ac_status=$?
--  grep -v '^ *+' conftest.er1 >conftest.err
--  rm -f conftest.er1
--  cat conftest.err >&5
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); } && {
--	 test -z "$ac_c_werror_flag" ||
--	 test ! -s conftest.err
--       } && test -s conftest.$ac_objext; then
--  ac_cv_have_decl___INTEL_COMPILER=yes
--else
--  $as_echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
-+fi
-+
-+
-+
- 
--	ac_cv_have_decl___INTEL_COMPILER=no
-+
-+
-+
-+# Check whether --enable-strict-compilation was given.
-+if test "${enable_strict_compilation+set}" = set; then :
-+  enableval=$enable_strict_compilation; STRICT_COMPILE=$enableval
-+else
-+  STRICT_COMPILE=no
- fi
- 
--rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+if test "x$STRICT_COMPILE" = "xyes"; then
-+	ac_fn_c_check_decl "$LINENO" "__SUNPRO_C" "ac_cv_have_decl___SUNPRO_C" "$ac_includes_default"
-+if test "x$ac_cv_have_decl___SUNPRO_C" = x""yes; then :
-+  SUNCC="yes"
-+else
-+  SUNCC="no"
- fi
--{ $as_echo "$as_me:$LINENO: result: $ac_cv_have_decl___INTEL_COMPILER" >&5
--$as_echo "$ac_cv_have_decl___INTEL_COMPILER" >&6; }
--if test "x$ac_cv_have_decl___INTEL_COMPILER" = x""yes; then
-+
-+	ac_fn_c_check_decl "$LINENO" "__INTEL_COMPILER" "ac_cv_have_decl___INTEL_COMPILER" "$ac_includes_default"
-+if test "x$ac_cv_have_decl___INTEL_COMPILER" = x""yes; then :
-   INTELCC="yes"
- else
-   INTELCC="no"
-@@ -4881,6 +4614,20 @@ CWARNFLAGS="$CWARNFLAGS $STRICT_CFLAGS"
- 
- 
- 
-+# Check whether --with-release-version was given.
-+if test "${with_release_version+set}" = set; then :
-+  withval=$with_release_version; RELEASE_VERSION="$withval"
-+else
-+  RELEASE_VERSION=""
-+fi
-+
-+	if test "x$RELEASE_VERSION" != "x"; then
-+		PACKAGE="$PACKAGE-$RELEASE_VERSION"
-+		PACKAGE_TARNAME="$PACKAGE_TARNAME-$RELEASE_VERSION"
-+		{ $as_echo "$as_me:${as_lineno-$LINENO}: Building with package name set to $PACKAGE" >&5
-+$as_echo "$as_me: Building with package name set to $PACKAGE" >&6;}
-+	fi
-+
- cat >>confdefs.h <<_ACEOF
- #define PACKAGE_VERSION_MAJOR `echo $PACKAGE_VERSION | cut -d . -f 1`
- _ACEOF
-@@ -4923,7 +4670,6 @@ echo 'util-macros \"pkgdatadir\" from xo
- 
- 
- 
--
- if test x$APP_MAN_SUFFIX = x    ; then
-     APP_MAN_SUFFIX=1
- fi
-@@ -4992,25 +4738,8 @@ fi
- 
- 
- 
--XORG_MAN_PAGE="X Version 11"
--
--MAN_SUBSTS="\
--	-e 's|__vendorversion__|\"\$(PACKAGE_STRING)\" \"\$(XORG_MAN_PAGE)\"|' \
--	-e 's|__xorgversion__|\"\$(PACKAGE_STRING)\" \"\$(XORG_MAN_PAGE)\"|' \
--	-e 's|__xservername__|Xorg|g' \
--	-e 's|__xconfigfile__|xorg.conf|g' \
--	-e 's|__projectroot__|\$(prefix)|g' \
--	-e 's|__appmansuffix__|\$(APP_MAN_SUFFIX)|g' \
--	-e 's|__drivermansuffix__|\$(DRIVER_MAN_SUFFIX)|g' \
--	-e 's|__adminmansuffix__|\$(ADMIN_MAN_SUFFIX)|g' \
--	-e 's|__libmansuffix__|\$(LIB_MAN_SUFFIX)|g' \
--	-e 's|__miscmansuffix__|\$(MISC_MAN_SUFFIX)|g' \
--	-e 's|__filemansuffix__|\$(FILE_MAN_SUFFIX)|g'"
--
--
--
- # Check whether --enable-silent-rules was given.
--if test "${enable_silent_rules+set}" = set; then
-+if test "${enable_silent_rules+set}" = set; then :
-   enableval=$enable_silent_rules;
- fi
- 
-@@ -5027,42 +4756,8 @@ ac_config_headers="$ac_config_headers do
- 
- ac_config_headers="$ac_config_headers Xfuncproto.h"
- 
-+ac_config_headers="$ac_config_headers Xos_r.h"
- 
--{ $as_echo "$as_me:$LINENO: checking host system type" >&5
--$as_echo_n "checking host system type... " >&6; }
--if test "${ac_cv_host+set}" = set; then
--  $as_echo_n "(cached) " >&6
--else
--  if test "x$host_alias" = x; then
--  ac_cv_host=$ac_cv_build
--else
--  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
--    { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
--$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
--   { (exit 1); exit 1; }; }
--fi
--
--fi
--{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5
--$as_echo "$ac_cv_host" >&6; }
--case $ac_cv_host in
--*-*-*) ;;
--*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
--$as_echo "$as_me: error: invalid value of canonical host" >&2;}
--   { (exit 1); exit 1; }; };;
--esac
--host=$ac_cv_host
--ac_save_IFS=$IFS; IFS='-'
--set x $ac_cv_host
--shift
--host_cpu=$1
--host_vendor=$2
--shift; shift
--# Remember, the first character of IFS is used to create $*,
--# except with old shells:
--host_os=$*
--IFS=$ac_save_IFS
--case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
- 
- 
- 
-@@ -5070,35 +4765,35 @@ case $host_os in *\ *) host_os=`echo "$h
- 
- # Check for enable/disable options
- # Check whether --enable-function-prototypes was given.
--if test "${enable_function_prototypes+set}" = set; then
-+if test "${enable_function_prototypes+set}" = set; then :
-   enableval=$enable_function_prototypes; FUNCPROTO=$enableval
- else
-   FUNCPROTO=auto
- fi
- 
- # Check whether --enable-varargs-prototypes was given.
--if test "${enable_varargs_prototypes+set}" = set; then
-+if test "${enable_varargs_prototypes+set}" = set; then :
-   enableval=$enable_varargs_prototypes; VAPROTO=$enableval
- else
-   VAPROTO=auto
- fi
- 
- # Check whether --enable-const-prototypes was given.
--if test "${enable_const_prototypes+set}" = set; then
-+if test "${enable_const_prototypes+set}" = set; then :
-   enableval=$enable_const_prototypes; CONSTPROTO=$enableval
- else
-   CONSTPROTO=auto
- fi
- 
- # Check whether --enable-nested-prototypes was given.
--if test "${enable_nested_prototypes+set}" = set; then
-+if test "${enable_nested_prototypes+set}" = set; then :
-   enableval=$enable_nested_prototypes; NESTEDPROTO=$enableval
- else
-   NESTEDPROTO=auto
- fi
- 
- # Check whether --enable-wide-prototypes was given.
--if test "${enable_wide_prototypes+set}" = set; then
-+if test "${enable_wide_prototypes+set}" = set; then :
-   enableval=$enable_wide_prototypes; WIDEPROTO=$enableval
- else
-   WIDEPROTO=auto
-@@ -5106,152 +4801,12 @@ fi
- 
- 
- 
--
--
--
--
- for ac_header in sys/select.h sys/param.h sys/types.h sys/time.h
--do
--as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
--if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
--  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
--$as_echo_n "checking for $ac_header... " >&6; }
--if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
--  $as_echo_n "(cached) " >&6
--fi
--ac_res=`eval 'as_val=${'$as_ac_Header'}
--		 $as_echo "$as_val"'`
--	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
--$as_echo "$ac_res" >&6; }
--else
--  # Is the header compilable?
--{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
--$as_echo_n "checking $ac_header usability... " >&6; }
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h.  */
--$ac_includes_default
--#include <$ac_header>
--_ACEOF
--rm -f conftest.$ac_objext
--if { (ac_try="$ac_compile"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_compile") 2>conftest.er1
--  ac_status=$?
--  grep -v '^ *+' conftest.er1 >conftest.err
--  rm -f conftest.er1
--  cat conftest.err >&5
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); } && {
--	 test -z "$ac_c_werror_flag" ||
--	 test ! -s conftest.err
--       } && test -s conftest.$ac_objext; then
--  ac_header_compiler=yes
--else
--  $as_echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--	ac_header_compiler=no
--fi
--
--rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
--{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
--$as_echo "$ac_header_compiler" >&6; }
--
--# Is the header present?
--{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
--$as_echo_n "checking $ac_header presence... " >&6; }
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h.  */
--#include <$ac_header>
--_ACEOF
--if { (ac_try="$ac_cpp conftest.$ac_ext"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
--  ac_status=$?
--  grep -v '^ *+' conftest.er1 >conftest.err
--  rm -f conftest.er1
--  cat conftest.err >&5
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); } >/dev/null && {
--	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
--	 test ! -s conftest.err
--       }; then
--  ac_header_preproc=yes
--else
--  $as_echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--  ac_header_preproc=no
--fi
--
--rm -f conftest.err conftest.$ac_ext
--{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
--$as_echo "$ac_header_preproc" >&6; }
--
--# So?  What about this header?
--case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
--  yes:no: )
--    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
--$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
--    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
--$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
--    ac_header_preproc=yes
--    ;;
--  no:yes:* )
--    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
--$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
--    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
--$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
--    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
--$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
--    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
--$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
--    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
--$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
--    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
--$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
--    ( cat <<\_ASBOX
--## ---------------------------------------------------------------------- ##
--## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
--## ---------------------------------------------------------------------- ##
--_ASBOX
--     ) | sed "s/^/$as_me: WARNING:     /" >&2
--    ;;
--esac
--{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
--$as_echo_n "checking for $ac_header... " >&6; }
--if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
--  $as_echo_n "(cached) " >&6
--else
--  eval "$as_ac_Header=\$ac_header_preproc"
--fi
--ac_res=`eval 'as_val=${'$as_ac_Header'}
--		 $as_echo "$as_val"'`
--	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
--$as_echo "$ac_res" >&6; }
--
--fi
--as_val=`eval 'as_val=${'$as_ac_Header'}
--		 $as_echo "$as_val"'`
--   if test "x$as_val" = x""yes; then
-+do :
-+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-+eval as_val=\$$as_ac_Header
-+   if test "x$as_val" = x""yes; then :
-   cat >>confdefs.h <<_ACEOF
- #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
- _ACEOF
-@@ -5269,72 +4824,7 @@ case $host_os in
- esac
- 
- if test "x$fds_bits_found" = xfalse ; then
--   { $as_echo "$as_me:$LINENO: checking for fd_set.fds_bits" >&5
--$as_echo_n "checking for fd_set.fds_bits... " >&6; }
--if test "${ac_cv_member_fd_set_fds_bits+set}" = set; then
--  $as_echo_n "(cached) " >&6
--else
--  cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h.  */
--
--                               #ifdef HAVE_SYS_PARAM_H
--                               #include <sys/param.h>
--                               #endif
--                               #ifdef HAVE_SYS_TYPES_H
--                               #include <sys/types.h>
--                               #endif
--                               #ifdef HAVE_SYS_TIME_H
--                               #include <sys/time.h>
--                               #endif
--                               #ifdef HAVE_SYS_SELECT_H
--			       #include <sys/select.h>
--                               #endif
--
--
--int
--main ()
--{
--static fd_set ac_aggr;
--if (ac_aggr.fds_bits)
--return 0;
--  ;
--  return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext
--if { (ac_try="$ac_compile"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_compile") 2>conftest.er1
--  ac_status=$?
--  grep -v '^ *+' conftest.er1 >conftest.err
--  rm -f conftest.er1
--  cat conftest.err >&5
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); } && {
--	 test -z "$ac_c_werror_flag" ||
--	 test ! -s conftest.err
--       } && test -s conftest.$ac_objext; then
--  ac_cv_member_fd_set_fds_bits=yes
--else
--  $as_echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--	cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h.  */
--
-+   ac_fn_c_check_member "$LINENO" "fd_set" "fds_bits" "ac_cv_member_fd_set_fds_bits" "
-                                #ifdef HAVE_SYS_PARAM_H
-                                #include <sys/param.h>
-                                #endif
-@@ -5348,51 +4838,8 @@ cat >>conftest.$ac_ext <<_ACEOF
- 			       #include <sys/select.h>
-                                #endif
- 
--
--int
--main ()
--{
--static fd_set ac_aggr;
--if (sizeof ac_aggr.fds_bits)
--return 0;
--  ;
--  return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext
--if { (ac_try="$ac_compile"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_compile") 2>conftest.er1
--  ac_status=$?
--  grep -v '^ *+' conftest.er1 >conftest.err
--  rm -f conftest.er1
--  cat conftest.err >&5
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); } && {
--	 test -z "$ac_c_werror_flag" ||
--	 test ! -s conftest.err
--       } && test -s conftest.$ac_objext; then
--  ac_cv_member_fd_set_fds_bits=yes
--else
--  $as_echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--	ac_cv_member_fd_set_fds_bits=no
--fi
--
--rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
--fi
--
--rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
--fi
--{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_fd_set_fds_bits" >&5
--$as_echo "$ac_cv_member_fd_set_fds_bits" >&6; }
--if test "x$ac_cv_member_fd_set_fds_bits" = x""yes; then
-+"
-+if test "x$ac_cv_member_fd_set_fds_bits" = x""yes; then :
- 
- 			       fds_bits_found=plain
- 			       USE_FDS_BITS="fds_bits"
-@@ -5402,72 +4849,7 @@ fi
- fi
- 
- if test "x$fds_bits_found" = xfalse ; then
--   { $as_echo "$as_me:$LINENO: checking for fd_set.__fds_bits" >&5
--$as_echo_n "checking for fd_set.__fds_bits... " >&6; }
--if test "${ac_cv_member_fd_set___fds_bits+set}" = set; then
--  $as_echo_n "(cached) " >&6
--else
--  cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h.  */
--
--                               #ifdef HAVE_SYS_PARAM_H
--                               #include <sys/param.h>
--                               #endif
--                               #ifdef HAVE_SYS_TYPES_H
--                               #include <sys/types.h>
--                               #endif
--                               #ifdef HAVE_SYS_TIME_H
--                               #include <sys/time.h>
--                               #endif
--                               #ifdef HAVE_SYS_SELECT_H
--			       #include <sys/select.h>
--                               #endif
--
--
--int
--main ()
--{
--static fd_set ac_aggr;
--if (ac_aggr.__fds_bits)
--return 0;
--  ;
--  return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext
--if { (ac_try="$ac_compile"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_compile") 2>conftest.er1
--  ac_status=$?
--  grep -v '^ *+' conftest.er1 >conftest.err
--  rm -f conftest.er1
--  cat conftest.err >&5
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); } && {
--	 test -z "$ac_c_werror_flag" ||
--	 test ! -s conftest.err
--       } && test -s conftest.$ac_objext; then
--  ac_cv_member_fd_set___fds_bits=yes
--else
--  $as_echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--	cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h.  */
--
-+   ac_fn_c_check_member "$LINENO" "fd_set" "__fds_bits" "ac_cv_member_fd_set___fds_bits" "
-                                #ifdef HAVE_SYS_PARAM_H
-                                #include <sys/param.h>
-                                #endif
-@@ -5481,51 +4863,8 @@ cat >>conftest.$ac_ext <<_ACEOF
- 			       #include <sys/select.h>
-                                #endif
- 
--
--int
--main ()
--{
--static fd_set ac_aggr;
--if (sizeof ac_aggr.__fds_bits)
--return 0;
--  ;
--  return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext
--if { (ac_try="$ac_compile"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
--$as_echo "$ac_try_echo") >&5
--  (eval "$ac_compile") 2>conftest.er1
--  ac_status=$?
--  grep -v '^ *+' conftest.er1 >conftest.err
--  rm -f conftest.er1
--  cat conftest.err >&5
--  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); } && {
--	 test -z "$ac_c_werror_flag" ||
--	 test ! -s conftest.err
--       } && test -s conftest.$ac_objext; then
--  ac_cv_member_fd_set___fds_bits=yes
--else
--  $as_echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--	ac_cv_member_fd_set___fds_bits=no
--fi
--
--rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
--fi
--
--rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
--fi
--{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_fd_set___fds_bits" >&5
--$as_echo "$ac_cv_member_fd_set___fds_bits" >&6; }
--if test "x$ac_cv_member_fd_set___fds_bits" = x""yes; then
-+"
-+if test "x$ac_cv_member_fd_set___fds_bits" = x""yes; then :
- 
- 			    fds_bits_found=underscores
- 			    USE_FDS_BITS="__fds_bits"
-@@ -5535,18 +4874,15 @@ fi
- fi
- 
- if test "x$fds_bits_found" = xfalse ; then
--    { { $as_echo "$as_me:$LINENO: error: Could not determine how to access the fds_bits or equivalent
--                  structure in fd_set on your platform." >&5
--$as_echo "$as_me: error: Could not determine how to access the fds_bits or equivalent
--                  structure in fd_set on your platform." >&2;}
--   { (exit 1); exit 1; }; }
-+    as_fn_error "Could not determine how to access the fds_bits or equivalent
-+                  structure in fd_set on your platform." "$LINENO" 5
- fi
- 
- 
- 
- 
- # Handle Xfuncproto.h
--{ $as_echo "$as_me:$LINENO: checking whether const prototypes are supported" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether const prototypes are supported" >&5
- $as_echo_n "checking whether const prototypes are supported... " >&6; }
- if test "x$CONSTPROTO" = xauto; then
- 	case $host_os in
-@@ -5558,10 +4894,10 @@ if test "x$CONSTPROTO" = xauto; then
- 		*)		CONSTPROTO=no ;;
- 	esac
- fi
--{ $as_echo "$as_me:$LINENO: result: $CONSTPROTO" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CONSTPROTO" >&5
- $as_echo "$CONSTPROTO" >&6; }
- 
--{ $as_echo "$as_me:$LINENO: checking whether varargs prototypes are supported" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether varargs prototypes are supported" >&5
- $as_echo_n "checking whether varargs prototypes are supported... " >&6; }
- if test "x$VAPROTO" = xauto; then
- 	case $host_os in
-@@ -5573,10 +4909,10 @@ if test "x$VAPROTO" = xauto; then
- 		*)		VAPROTO=no ;;
- 	esac
- fi
--{ $as_echo "$as_me:$LINENO: result: $VAPROTO" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $VAPROTO" >&5
- $as_echo "$VAPROTO" >&6; }
- 
--{ $as_echo "$as_me:$LINENO: checking whether nested prototypes are supported" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether nested prototypes are supported" >&5
- $as_echo_n "checking whether nested prototypes are supported... " >&6; }
- if test "x$NESTEDPROTO" = xauto; then
- 	case $host_os in
-@@ -5588,10 +4924,10 @@ if test "x$NESTEDPROTO" = xauto; then
- 		*)		NESTEDPROTO=no ;;
- 	esac
- fi
--{ $as_echo "$as_me:$LINENO: result: $NESTEDPROTO" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $NESTEDPROTO" >&5
- $as_echo "$NESTEDPROTO" >&6; }
- 
--{ $as_echo "$as_me:$LINENO: checking whether to force function prototypes" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to force function prototypes" >&5
- $as_echo_n "checking whether to force function prototypes... " >&6; }
- if test "x$FUNCPROTO" = xauto; then
- 	case $host_os in
-@@ -5608,57 +4944,43 @@ if test "x$FUNCPROTO" = xauto; then
- 		;;
- 	esac
- fi
--{ $as_echo "$as_me:$LINENO: result: $FUNCPROTO" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $FUNCPROTO" >&5
- $as_echo "$FUNCPROTO" >&6; }
- 
- # Logic for this was taken from Imake.tmpl
- if test "x$FUNCPROTO" = xyes && test "x$VAPROTO" = xyes && test "x$NESTEDPROTO" = xyes && test "x$CONSTPROTO" = xyes; then
- 
--cat >>confdefs.h <<\_ACEOF
--#define FUNCPROTO 15
--_ACEOF
-+$as_echo "#define FUNCPROTO 15" >>confdefs.h
- 
- else
-   if test "x$FUNCPROTO" = xyes && test "x$VAPROTO" = xyes && test "x$NESTEDPROTO" = xyes; then
- 
--cat >>confdefs.h <<\_ACEOF
--#define FUNCPROTO 11
--_ACEOF
-+$as_echo "#define FUNCPROTO 11" >>confdefs.h
- 
-   else
-     if test "x$FUNCPROTO" = xyes && test "x$NESTEDPROTO" = xyes; then
- 
--cat >>confdefs.h <<\_ACEOF
--#define FUNCPROTO 9
--_ACEOF
-+$as_echo "#define FUNCPROTO 9" >>confdefs.h
- 
-     else
-       if test "x$FUNCPROTO" = xyes && test "x$VAPROTO" = xyes && test "x$CONSTPROTO" = xyes; then
- 
--cat >>confdefs.h <<\_ACEOF
--#define FUNCPROTO 7
--_ACEOF
-+$as_echo "#define FUNCPROTO 7" >>confdefs.h
- 
-       else
-         if test "x$FUNCPROTO" = xyes && test "x$CONSTPROTO" = xyes; then
- 
--cat >>confdefs.h <<\_ACEOF
--#define FUNCPROTO 5
--_ACEOF
-+$as_echo "#define FUNCPROTO 5" >>confdefs.h
- 
-         else
-           if test "x$FUNCPROTO" = xyes && test "x$VAPROTO" = xyes; then
- 
--cat >>confdefs.h <<\_ACEOF
--#define FUNCPROTO 3
--_ACEOF
-+$as_echo "#define FUNCPROTO 3" >>confdefs.h
- 
-           else
-             if test "x$FUNCPROTO" = xyes; then
- 
--cat >>confdefs.h <<\_ACEOF
--#define FUNCPROTO /**/
--_ACEOF
-+$as_echo "#define FUNCPROTO /**/" >>confdefs.h
- 
-             fi
-           fi
-@@ -5668,7 +4990,7 @@ _ACEOF
-   fi
- fi
- 
--{ $as_echo "$as_me:$LINENO: checking whether to widen function prototypes" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to widen function prototypes" >&5
- $as_echo_n "checking whether to widen function prototypes... " >&6; }
- if test "x$WIDEPROTO" = xauto; then
- 	case $host_os in
-@@ -5679,14 +5001,62 @@ if test "x$WIDEPROTO" = xauto; then
- 		*)		WIDEPROTO=yes ;;
- 	esac
- fi
--{ $as_echo "$as_me:$LINENO: result: $WIDEPROTO" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $WIDEPROTO" >&5
- $as_echo "$WIDEPROTO" >&6; }
- 
- if test "x$WIDEPROTO" = xno; then
- 
--cat >>confdefs.h <<\_ACEOF
--#define NARROWPROTO /**/
--_ACEOF
-+$as_echo "#define NARROWPROTO /**/" >>confdefs.h
-+
-+fi
-+
-+# Handle Xos_r.h
-+ac_fn_c_check_func "$LINENO" "readdir_r" "ac_cv_func_readdir_r"
-+if test "x$ac_cv_func_readdir_r" = x""yes; then :
-+
-+$as_echo "#define _XOS_R_H_MTSAFE_DIRENTAPI /**/" >>confdefs.h
-+
-+fi
-+
-+ac_fn_c_check_func "$LINENO" "getgrgid_r" "ac_cv_func_getgrgid_r"
-+if test "x$ac_cv_func_getgrgid_r" = x""yes; then :
-+
-+$as_echo "#define _XOS_R_H_MTSAFE_GRPAPI /**/" >>confdefs.h
-+
-+fi
-+
-+ac_fn_c_check_func "$LINENO" "getpwuid_r" "ac_cv_func_getpwuid_r"
-+if test "x$ac_cv_func_getpwuid_r" = x""yes; then :
-+
-+$as_echo "#define _XOS_R_H_MTSAFE_PWDAPI /**/" >>confdefs.h
-+
-+fi
-+
-+ac_fn_c_check_func "$LINENO" "gethostbyname_r" "ac_cv_func_gethostbyname_r"
-+if test "x$ac_cv_func_gethostbyname_r" = x""yes; then :
-+
-+$as_echo "#define _XOS_R_H_MTSAFE_NETDBAPI /**/" >>confdefs.h
-+
-+fi
-+
-+ac_fn_c_check_func "$LINENO" "strtok_r" "ac_cv_func_strtok_r"
-+if test "x$ac_cv_func_strtok_r" = x""yes; then :
-+
-+$as_echo "#define _XOS_R_H_MTSAFE_STRINGAPI /**/" >>confdefs.h
-+
-+fi
-+
-+ac_fn_c_check_func "$LINENO" "gmtime_r" "ac_cv_func_gmtime_r"
-+if test "x$ac_cv_func_gmtime_r" = x""yes; then :
-+
-+$as_echo "#define _XOS_R_H_MTSAFE_TIMEAPI /**/" >>confdefs.h
-+
-+fi
-+
-+ac_fn_c_check_func "$LINENO" "ttyname_r" "ac_cv_func_ttyname_r"
-+if test "x$ac_cv_func_ttyname_r" = x""yes; then :
-+
-+$as_echo "#define _XOS_R_H_MTSAFE_UNISTDAPI /**/" >>confdefs.h
- 
- fi
- 
-@@ -5720,13 +5090,13 @@ _ACEOF
-     case $ac_val in #(
-     *${as_nl}*)
-       case $ac_var in #(
--      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
-+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
- $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-       esac
-       case $ac_var in #(
-       _ | IFS | as_nl) ;; #(
-       BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
--      *) $as_unset $ac_var ;;
-+      *) { eval $ac_var=; unset $ac_var;} ;;
-       esac ;;
-     esac
-   done
-@@ -5734,8 +5104,8 @@ $as_echo "$as_me: WARNING: cache variabl
-   (set) 2>&1 |
-     case $as_nl`(ac_space=' '; set) 2>&1` in #(
-     *${as_nl}ac_space=\ *)
--      # `set' does not quote correctly, so add quotes (double-quote
--      # substitution turns \\\\ into \\, and sed turns \\ into \).
-+      # `set' does not quote correctly, so add quotes: double-quote
-+      # substitution turns \\\\ into \\, and sed turns \\ into \.
-       sed -n \
- 	"s/'/'\\\\''/g;
- 	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-@@ -5758,11 +5128,11 @@ $as_echo "$as_me: WARNING: cache variabl
- if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
-   if test -w "$cache_file"; then
-     test "x$cache_file" != "x/dev/null" &&
--      { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
-+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
- $as_echo "$as_me: updating cache $cache_file" >&6;}
-     cat confcache >$cache_file
-   else
--    { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
- $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
-   fi
- fi
-@@ -5782,8 +5152,8 @@ for ac_i in : $LIBOBJS; do test "x$ac_i"
-   ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
-   # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
-   #    will be set to the directory where LIBOBJS objects are built.
--  ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
--  ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
-+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
- done
- LIBOBJS=$ac_libobjs
- 
-@@ -5799,34 +5169,26 @@ else
- fi
- 
- if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
--  { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
--Usually this means the macro was only invoked conditionally." >&5
--$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
--Usually this means the macro was only invoked conditionally." >&2;}
--   { (exit 1); exit 1; }; }
-+  as_fn_error "conditional \"MAINTAINER_MODE\" was never defined.
-+Usually this means the macro was only invoked conditionally." "$LINENO" 5
- fi
- if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
--  { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
--Usually this means the macro was only invoked conditionally." >&5
--$as_echo "$as_me: error: conditional \"AMDEP\" was never defined.
--Usually this means the macro was only invoked conditionally." >&2;}
--   { (exit 1); exit 1; }; }
-+  as_fn_error "conditional \"AMDEP\" was never defined.
-+Usually this means the macro was only invoked conditionally." "$LINENO" 5
- fi
- if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
--  { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
--Usually this means the macro was only invoked conditionally." >&5
--$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
--Usually this means the macro was only invoked conditionally." >&2;}
--   { (exit 1); exit 1; }; }
-+  as_fn_error "conditional \"am__fastdepCC\" was never defined.
-+Usually this means the macro was only invoked conditionally." "$LINENO" 5
- fi
- 
- : ${CONFIG_STATUS=./config.status}
- ac_write_fail=0
- ac_clean_files_save=$ac_clean_files
- ac_clean_files="$ac_clean_files $CONFIG_STATUS"
--{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
- $as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
--cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-+as_write_fail=0
-+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
- #! $SHELL
- # Generated by $as_me.
- # Run this file to recreate the current configuration.
-@@ -5836,17 +5198,18 @@ cat >$CONFIG_STATUS <<_ACEOF || ac_write
- debug=false
- ac_cs_recheck=false
- ac_cs_silent=false
--SHELL=\${CONFIG_SHELL-$SHELL}
--_ACEOF
- 
--cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
--## --------------------- ##
--## M4sh Initialization.  ##
--## --------------------- ##
-+SHELL=\${CONFIG_SHELL-$SHELL}
-+export SHELL
-+_ASEOF
-+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
-+## -------------------- ##
-+## M4sh Initialization. ##
-+## -------------------- ##
- 
- # Be more Bourne compatible
- DUALCASE=1; export DUALCASE # for MKS sh
--if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
-   emulate sh
-   NULLCMD=:
-   # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-@@ -5854,23 +5217,15 @@ if test -n "${ZSH_VERSION+set}" && (emul
-   alias -g '${1+"$@"}'='"$@"'
-   setopt NO_GLOB_SUBST
- else
--  case `(set -o) 2>/dev/null` in
--  *posix*) set -o posix ;;
-+  case `(set -o) 2>/dev/null` in #(
-+  *posix*) :
-+    set -o posix ;; #(
-+  *) :
-+     ;;
- esac
--
- fi
- 
- 
--
--
--# PATH needs CR
--# Avoid depending upon Character Ranges.
--as_cr_letters='abcdefghijklmnopqrstuvwxyz'
--as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
--as_cr_Letters=$as_cr_letters$as_cr_LETTERS
--as_cr_digits='0123456789'
--as_cr_alnum=$as_cr_Letters$as_cr_digits
--
- as_nl='
- '
- export as_nl
-@@ -5878,7 +5233,13 @@ export as_nl
- as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
- as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
- as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
--if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-+# Prefer a ksh shell builtin over an external printf program on Solaris,
-+# but without wasting forks for bash or zsh.
-+if test -z "$BASH_VERSION$ZSH_VERSION" \
-+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
-+  as_echo='print -r --'
-+  as_echo_n='print -rn --'
-+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-   as_echo='printf %s\n'
-   as_echo_n='printf %s'
- else
-@@ -5889,7 +5250,7 @@ else
-     as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-     as_echo_n_body='eval
-       arg=$1;
--      case $arg in
-+      case $arg in #(
-       *"$as_nl"*)
- 	expr "X$arg" : "X\\(.*\\)$as_nl";
- 	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-@@ -5912,13 +5273,6 @@ if test "${PATH_SEPARATOR+set}" != set; 
-   }
- fi
- 
--# Support unset when possible.
--if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
--  as_unset=unset
--else
--  as_unset=false
--fi
--
- 
- # IFS
- # We need space, tab and new line, in precisely that order.  Quoting is
-@@ -5928,15 +5282,15 @@ fi
- IFS=" ""	$as_nl"
- 
- # Find who we are.  Look in the path if we contain no directory separator.
--case $0 in
-+case $0 in #((
-   *[\\/]* ) as_myself=$0 ;;
-   *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
--  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
--done
-+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+  done
- IFS=$as_save_IFS
- 
-      ;;
-@@ -5948,12 +5302,16 @@ if test "x$as_myself" = x; then
- fi
- if test ! -f "$as_myself"; then
-   $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
--  { (exit 1); exit 1; }
-+  exit 1
- fi
- 
--# Work around bugs in pre-3.0 UWIN ksh.
--for as_var in ENV MAIL MAILPATH
--do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+# Unset variables that we do not need and which cause bugs (e.g. in
-+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
-+# suppresses any "Segmentation fault" message there.  '((' could
-+# trigger a bug in pdksh 5.2.14.
-+for as_var in BASH_ENV ENV MAIL MAILPATH
-+do eval test x\${$as_var+set} = xset \
-+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
- done
- PS1='$ '
- PS2='> '
-@@ -5965,7 +5323,89 @@ export LC_ALL
- LANGUAGE=C
- export LANGUAGE
- 
--# Required to use basename.
-+# CDPATH.
-+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-+
-+
-+# as_fn_error ERROR [LINENO LOG_FD]
-+# ---------------------------------
-+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-+# script with status $?, using 1 if that was 0.
-+as_fn_error ()
-+{
-+  as_status=$?; test $as_status -eq 0 && as_status=1
-+  if test "$3"; then
-+    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
-+  fi
-+  $as_echo "$as_me: error: $1" >&2
-+  as_fn_exit $as_status
-+} # as_fn_error
-+
-+
-+# as_fn_set_status STATUS
-+# -----------------------
-+# Set $? to STATUS, without forking.
-+as_fn_set_status ()
-+{
-+  return $1
-+} # as_fn_set_status
-+
-+# as_fn_exit STATUS
-+# -----------------
-+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-+as_fn_exit ()
-+{
-+  set +e
-+  as_fn_set_status $1
-+  exit $1
-+} # as_fn_exit
-+
-+# as_fn_unset VAR
-+# ---------------
-+# Portably unset VAR.
-+as_fn_unset ()
-+{
-+  { eval $1=; unset $1;}
-+}
-+as_unset=as_fn_unset
-+# as_fn_append VAR VALUE
-+# ----------------------
-+# Append the text in VALUE to the end of the definition contained in VAR. Take
-+# advantage of any shell optimizations that allow amortized linear growth over
-+# repeated appends, instead of the typical quadratic growth present in naive
-+# implementations.
-+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
-+  eval 'as_fn_append ()
-+  {
-+    eval $1+=\$2
-+  }'
-+else
-+  as_fn_append ()
-+  {
-+    eval $1=\$$1\$2
-+  }
-+fi # as_fn_append
-+
-+# as_fn_arith ARG...
-+# ------------------
-+# Perform arithmetic evaluation on the ARGs, and store the result in the
-+# global $as_val. Take advantage of shells that can avoid forks. The arguments
-+# must be portable across $(()) and expr.
-+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
-+  eval 'as_fn_arith ()
-+  {
-+    as_val=$(( $* ))
-+  }'
-+else
-+  as_fn_arith ()
-+  {
-+    as_val=`expr "$@" || test $? -eq 1`
-+  }
-+fi # as_fn_arith
-+
-+
- if expr a : '\(a\)' >/dev/null 2>&1 &&
-    test "X`expr 00001 : '.*\(...\)'`" = X001; then
-   as_expr=expr
-@@ -5979,8 +5419,12 @@ else
-   as_basename=false
- fi
- 
-+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-+  as_dirname=dirname
-+else
-+  as_dirname=false
-+fi
- 
--# Name of the executable.
- as_me=`$as_basename -- "$0" ||
- $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- 	 X"$0" : 'X\(//\)$' \| \
-@@ -6000,76 +5444,25 @@ $as_echo X/"$0" |
- 	  }
- 	  s/.*/./; q'`
- 
--# CDPATH.
--$as_unset CDPATH
--
--
--
--  as_lineno_1=$LINENO
--  as_lineno_2=$LINENO
--  test "x$as_lineno_1" != "x$as_lineno_2" &&
--  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
--
--  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
--  # uniformly replaced by the line number.  The first 'sed' inserts a
--  # line-number line after each line using $LINENO; the second 'sed'
--  # does the real work.  The second script uses 'N' to pair each
--  # line-number line with the line containing $LINENO, and appends
--  # trailing '-' during substitution so that $LINENO is not a special
--  # case at line end.
--  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
--  # scripts with optimization help from Paolo Bonzini.  Blame Lee
--  # E. McMahon (1931-1989) for sed's syntax.  :-)
--  sed -n '
--    p
--    /[$]LINENO/=
--  ' <$as_myself |
--    sed '
--      s/[$]LINENO.*/&-/
--      t lineno
--      b
--      :lineno
--      N
--      :loop
--      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
--      t loop
--      s/-\n.*//
--    ' >$as_me.lineno &&
--  chmod +x "$as_me.lineno" ||
--    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
--   { (exit 1); exit 1; }; }
--
--  # Don't try to exec as it changes $[0], causing all sort of problems
--  # (the dirname of $[0] is not the place where we might find the
--  # original and so on.  Autoconf is especially sensitive to this).
--  . "./$as_me.lineno"
--  # Exit status is that of the last command.
--  exit
--}
--
--
--if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
--  as_dirname=dirname
--else
--  as_dirname=false
--fi
-+# Avoid depending upon Character Ranges.
-+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-+as_cr_digits='0123456789'
-+as_cr_alnum=$as_cr_Letters$as_cr_digits
- 
- ECHO_C= ECHO_N= ECHO_T=
--case `echo -n x` in
-+case `echo -n x` in #(((((
- -n*)
--  case `echo 'x\c'` in
-+  case `echo 'xy\c'` in
-   *c*) ECHO_T='	';;	# ECHO_T is single tab character.
--  *)   ECHO_C='\c';;
-+  xy)  ECHO_C='\c';;
-+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
-+       ECHO_T='	';;
-   esac;;
- *)
-   ECHO_N='-n';;
- esac
--if expr a : '\(a\)' >/dev/null 2>&1 &&
--   test "X`expr 00001 : '.*\(...\)'`" = X001; then
--  as_expr=expr
--else
--  as_expr=false
--fi
- 
- rm -f conf$$ conf$$.exe conf$$.file
- if test -d conf$$.dir; then
-@@ -6098,8 +5491,56 @@ fi
- rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
- rmdir conf$$.dir 2>/dev/null
- 
-+
-+# as_fn_mkdir_p
-+# -------------
-+# Create "$as_dir" as a directory, including parents if necessary.
-+as_fn_mkdir_p ()
-+{
-+
-+  case $as_dir in #(
-+  -*) as_dir=./$as_dir;;
-+  esac
-+  test -d "$as_dir" || eval $as_mkdir_p || {
-+    as_dirs=
-+    while :; do
-+      case $as_dir in #(
-+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-+      *) as_qdir=$as_dir;;
-+      esac
-+      as_dirs="'$as_qdir' $as_dirs"
-+      as_dir=`$as_dirname -- "$as_dir" ||
-+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+	 X"$as_dir" : 'X\(//\)[^/]' \| \
-+	 X"$as_dir" : 'X\(//\)$' \| \
-+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-+$as_echo X"$as_dir" |
-+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)[^/].*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\).*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  s/.*/./; q'`
-+      test -d "$as_dir" && break
-+    done
-+    test -z "$as_dirs" || eval "mkdir $as_dirs"
-+  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
-+
-+
-+} # as_fn_mkdir_p
- if mkdir -p . 2>/dev/null; then
--  as_mkdir_p=:
-+  as_mkdir_p='mkdir -p "$as_dir"'
- else
-   test -d ./-p && rmdir ./-p
-   as_mkdir_p=false
-@@ -6118,10 +5559,10 @@ else
-       if test -d "$1"; then
- 	test -d "$1/.";
-       else
--	case $1 in
-+	case $1 in #(
- 	-*)set "./$1";;
- 	esac;
--	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
-+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
- 	???[sx]*):;;*)false;;esac;fi
-     '\'' sh
-   '
-@@ -6136,13 +5577,19 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr
- 
- 
- exec 6>&1
-+## ----------------------------------- ##
-+## Main body of $CONFIG_STATUS script. ##
-+## ----------------------------------- ##
-+_ASEOF
-+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
- 
--# Save the log message, to keep $[0] and so on meaningful, and to
-+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-+# Save the log message, to keep $0 and so on meaningful, and to
- # report actual input values of CONFIG_FILES etc. instead of their
- # values after options handling.
- ac_log="
- This file was extended by Xproto $as_me 7.0.18, which was
--generated by GNU Autoconf 2.63.  Invocation command line was
-+generated by GNU Autoconf 2.65.  Invocation command line was
- 
-   CONFIG_FILES    = $CONFIG_FILES
-   CONFIG_HEADERS  = $CONFIG_HEADERS
-@@ -6174,13 +5621,15 @@ _ACEOF
- 
- cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
- ac_cs_usage="\
--\`$as_me' instantiates files from templates according to the
--current configuration.
-+\`$as_me' instantiates files and other configuration actions
-+from templates according to the current configuration.  Unless the files
-+and actions are specified as TAGs, all are instantiated by default.
- 
--Usage: $0 [OPTION]... [FILE]...
-+Usage: $0 [OPTION]... [TAG]...
- 
-   -h, --help       print this help, then exit
-   -V, --version    print version number and configuration settings, then exit
-+      --config     print configuration, then exit
-   -q, --quiet, --silent
-                    do not print progress messages
-   -d, --debug      don't remove temporary files
-@@ -6199,16 +5648,17 @@ $config_headers
- Configuration commands:
- $config_commands
- 
--Report bugs to <bug-autoconf@gnu.org>."
-+Report bugs to <https://bugs.freedesktop.org/enter_bug.cgi?product=xorg>."
- 
- _ACEOF
- cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
- ac_cs_version="\\
- Xproto config.status 7.0.18
--configured by $0, generated by GNU Autoconf 2.63,
--  with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-+configured by $0, generated by GNU Autoconf 2.65,
-+  with options \\"\$ac_cs_config\\"
- 
--Copyright (C) 2008 Free Software Foundation, Inc.
-+Copyright (C) 2009 Free Software Foundation, Inc.
- This config.status script is free software; the Free Software Foundation
- gives unlimited permission to copy, distribute and modify it."
- 
-@@ -6244,6 +5694,8 @@ do
-     ac_cs_recheck=: ;;
-   --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-     $as_echo "$ac_cs_version"; exit ;;
-+  --config | --confi | --conf | --con | --co | --c )
-+    $as_echo "$ac_cs_config"; exit ;;
-   --debug | --debu | --deb | --de | --d | -d )
-     debug=: ;;
-   --file | --fil | --fi | --f )
-@@ -6251,20 +5703,19 @@ do
-     case $ac_optarg in
-     *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
-     esac
--    CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
-+    as_fn_append CONFIG_FILES " '$ac_optarg'"
-     ac_need_defaults=false;;
-   --header | --heade | --head | --hea )
-     $ac_shift
-     case $ac_optarg in
-     *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
-     esac
--    CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'"
-+    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
-     ac_need_defaults=false;;
-   --he | --h)
-     # Conflict between --help and --header
--    { $as_echo "$as_me: error: ambiguous option: $1
--Try \`$0 --help' for more information." >&2
--   { (exit 1); exit 1; }; };;
-+    as_fn_error "ambiguous option: \`$1'
-+Try \`$0 --help' for more information.";;
-   --help | --hel | -h )
-     $as_echo "$ac_cs_usage"; exit ;;
-   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-@@ -6272,11 +5723,10 @@ Try \`$0 --help' for more information." 
-     ac_cs_silent=: ;;
- 
-   # This is an error.
--  -*) { $as_echo "$as_me: error: unrecognized option: $1
--Try \`$0 --help' for more information." >&2
--   { (exit 1); exit 1; }; } ;;
-+  -*) as_fn_error "unrecognized option: \`$1'
-+Try \`$0 --help' for more information." ;;
- 
--  *) ac_config_targets="$ac_config_targets $1"
-+  *) as_fn_append ac_config_targets " $1"
-      ac_need_defaults=false ;;
- 
-   esac
-@@ -6330,13 +5780,12 @@ do
-     "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
-     "do-not-use-config.h") CONFIG_HEADERS="$CONFIG_HEADERS do-not-use-config.h" ;;
-     "Xfuncproto.h") CONFIG_HEADERS="$CONFIG_HEADERS Xfuncproto.h" ;;
-+    "Xos_r.h") CONFIG_HEADERS="$CONFIG_HEADERS Xos_r.h" ;;
-     "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-     "Xpoll.h") CONFIG_FILES="$CONFIG_FILES Xpoll.h" ;;
-     "xproto.pc") CONFIG_FILES="$CONFIG_FILES xproto.pc" ;;
- 
--  *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
--$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
--   { (exit 1); exit 1; }; };;
-+  *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
-   esac
- done
- 
-@@ -6363,7 +5812,7 @@ $debug ||
-   trap 'exit_status=$?
-   { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
- ' 0
--  trap '{ (exit 1); exit 1; }' 1 2 13 15
-+  trap 'as_fn_exit 1' 1 2 13 15
- }
- # Create a (secure) tmp directory for tmp files.
- 
-@@ -6374,11 +5823,7 @@ $debug ||
- {
-   tmp=./conf$$-$RANDOM
-   (umask 077 && mkdir "$tmp")
--} ||
--{
--   $as_echo "$as_me: cannot create a temporary directory in ." >&2
--   { (exit 1); exit 1; }
--}
-+} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
- 
- # Set up the scripts for CONFIG_FILES section.
- # No need to generate them if there are no CONFIG_FILES.
-@@ -6386,10 +5831,16 @@ $debug ||
- if test -n "$CONFIG_FILES"; then
- 
- 
--ac_cr='
'
-+ac_cr=`echo X | tr X '\015'`
-+# On cygwin, bash can eat \r inside `` if the user requested igncr.
-+# But we know of no other shell where ac_cr would be empty at this
-+# point, so we can use a bashism as a fallback.
-+if test "x$ac_cr" = x; then
-+  eval ac_cr=\$\'\\r\'
-+fi
- ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
- if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
--  ac_cs_awk_cr='\\r'
-+  ac_cs_awk_cr='\r'
- else
-   ac_cs_awk_cr=$ac_cr
- fi
-@@ -6403,24 +5854,18 @@ _ACEOF
-   echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
-   echo "_ACEOF"
- } >conf$$subs.sh ||
--  { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
--$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
--   { (exit 1); exit 1; }; }
-+  as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
- ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
- ac_delim='%!_!# '
- for ac_last_try in false false false false false :; do
-   . ./conf$$subs.sh ||
--    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
--$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
--   { (exit 1); exit 1; }; }
-+    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
- 
-   ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
-   if test $ac_delim_n = $ac_delim_num; then
-     break
-   elif $ac_last_try; then
--    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
--$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
--   { (exit 1); exit 1; }; }
-+    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
-   else
-     ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-   fi
-@@ -6442,7 +5887,7 @@ s/'"$ac_delim"'$//
- t delim
- :nl
- h
--s/\(.\{148\}\).*/\1/
-+s/\(.\{148\}\)..*/\1/
- t more1
- s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
- p
-@@ -6456,7 +5901,7 @@ s/.\{148\}//
- t nl
- :delim
- h
--s/\(.\{148\}\).*/\1/
-+s/\(.\{148\}\)..*/\1/
- t more2
- s/["\\]/\\&/g; s/^/"/; s/$/"/
- p
-@@ -6509,9 +5954,7 @@ if sed "s/$ac_cr//" < /dev/null > /dev/n
- else
-   cat
- fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
--  || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5
--$as_echo "$as_me: error: could not setup config files machinery" >&2;}
--   { (exit 1); exit 1; }; }
-+  || as_fn_error "could not setup config files machinery" "$LINENO" 5
- _ACEOF
- 
- # VPATH may cause trouble with some makes, so we remove $(srcdir),
-@@ -6552,9 +5995,7 @@ for ac_last_try in false false :; do
-   if test -z "$ac_t"; then
-     break
-   elif $ac_last_try; then
--    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5
--$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;}
--   { (exit 1); exit 1; }; }
-+    as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5
-   else
-     ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-   fi
-@@ -6639,9 +6080,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_writ
- _ACAWK
- _ACEOF
- cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
--  { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5
--$as_echo "$as_me: error: could not setup config headers machinery" >&2;}
--   { (exit 1); exit 1; }; }
-+  as_fn_error "could not setup config headers machinery" "$LINENO" 5
- fi # test -n "$CONFIG_HEADERS"
- 
- 
-@@ -6654,9 +6093,7 @@ do
-   esac
-   case $ac_mode$ac_tag in
-   :[FHL]*:*);;
--  :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5
--$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
--   { (exit 1); exit 1; }; };;
-+  :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
-   :[FH]-) ac_tag=-:-;;
-   :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
-   esac
-@@ -6684,12 +6121,10 @@ $as_echo "$as_me: error: invalid tag $ac
- 	   [\\/$]*) false;;
- 	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
- 	   esac ||
--	   { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
--$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
--   { (exit 1); exit 1; }; };;
-+	   as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
-       esac
-       case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
--      ac_file_inputs="$ac_file_inputs '$ac_f'"
-+      as_fn_append ac_file_inputs " '$ac_f'"
-     done
- 
-     # Let's still pretend it is `configure' which instantiates (i.e., don't
-@@ -6700,7 +6135,7 @@ $as_echo "$as_me: error: cannot find inp
- 	`' by configure.'
-     if test x"$ac_file" != x-; then
-       configure_input="$ac_file.  $configure_input"
--      { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
-+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
- $as_echo "$as_me: creating $ac_file" >&6;}
-     fi
-     # Neutralize special characters interpreted by sed in replacement strings.
-@@ -6713,9 +6148,7 @@ $as_echo "$as_me: creating $ac_file" >&6
- 
-     case $ac_tag in
-     *:-:* | *:-) cat >"$tmp/stdin" \
--      || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
--$as_echo "$as_me: error: could not create $ac_file" >&2;}
--   { (exit 1); exit 1; }; } ;;
-+      || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
-     esac
-     ;;
-   esac
-@@ -6743,47 +6176,7 @@ $as_echo X"$ac_file" |
- 	    q
- 	  }
- 	  s/.*/./; q'`
--  { as_dir="$ac_dir"
--  case $as_dir in #(
--  -*) as_dir=./$as_dir;;
--  esac
--  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
--    as_dirs=
--    while :; do
--      case $as_dir in #(
--      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
--      *) as_qdir=$as_dir;;
--      esac
--      as_dirs="'$as_qdir' $as_dirs"
--      as_dir=`$as_dirname -- "$as_dir" ||
--$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
--	 X"$as_dir" : 'X\(//\)[^/]' \| \
--	 X"$as_dir" : 'X\(//\)$' \| \
--	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
--$as_echo X"$as_dir" |
--    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
--	    s//\1/
--	    q
--	  }
--	  /^X\(\/\/\)[^/].*/{
--	    s//\1/
--	    q
--	  }
--	  /^X\(\/\/\)$/{
--	    s//\1/
--	    q
--	  }
--	  /^X\(\/\).*/{
--	    s//\1/
--	    q
--	  }
--	  s/.*/./; q'`
--      test -d "$as_dir" && break
--    done
--    test -z "$as_dirs" || eval "mkdir $as_dirs"
--  } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
--$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
--   { (exit 1); exit 1; }; }; }
-+  as_dir="$ac_dir"; as_fn_mkdir_p
-   ac_builddir=.
- 
- case "$ac_dir" in
-@@ -6840,7 +6233,6 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri
- # If the template does not know about datarootdir, expand it.
- # FIXME: This hack should be removed a few years after 2.60.
- ac_datarootdir_hack=; ac_datarootdir_seen=
--
- ac_sed_dataroot='
- /datarootdir/ {
-   p
-@@ -6850,12 +6242,11 @@ ac_sed_dataroot='
- /@docdir@/p
- /@infodir@/p
- /@localedir@/p
--/@mandir@/p
--'
-+/@mandir@/p'
- case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
- *datarootdir*) ac_datarootdir_seen=yes;;
- *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
--  { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
- $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
- _ACEOF
- cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-@@ -6865,7 +6256,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_writ
-   s&@infodir@&$infodir&g
-   s&@localedir@&$localedir&g
-   s&@mandir@&$mandir&g
--    s&\\\${datarootdir}&$datarootdir&g' ;;
-+  s&\\\${datarootdir}&$datarootdir&g' ;;
- esac
- _ACEOF
- 
-@@ -6894,14 +6285,12 @@ s&@MKDIR_P@&$ac_MKDIR_P&;t t
- $ac_datarootdir_hack
- "
- eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
--  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
--$as_echo "$as_me: error: could not create $ac_file" >&2;}
--   { (exit 1); exit 1; }; }
-+  || as_fn_error "could not create $ac_file" "$LINENO" 5
- 
- test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-   { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
-   { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
--  { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
- which seems to be undefined.  Please make sure it is defined." >&5
- $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
- which seems to be undefined.  Please make sure it is defined." >&2;}
-@@ -6911,9 +6300,7 @@ which seems to be undefined.  Please mak
-   -) cat "$tmp/out" && rm -f "$tmp/out";;
-   *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
-   esac \
--  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
--$as_echo "$as_me: error: could not create $ac_file" >&2;}
--   { (exit 1); exit 1; }; }
-+  || as_fn_error "could not create $ac_file" "$LINENO" 5
-  ;;
-   :H)
-   #
-@@ -6924,25 +6311,19 @@ $as_echo "$as_me: error: could not creat
-       $as_echo "/* $configure_input  */" \
-       && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
-     } >"$tmp/config.h" \
--      || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
--$as_echo "$as_me: error: could not create $ac_file" >&2;}
--   { (exit 1); exit 1; }; }
-+      || as_fn_error "could not create $ac_file" "$LINENO" 5
-     if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
--      { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-+      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
- $as_echo "$as_me: $ac_file is unchanged" >&6;}
-     else
-       rm -f "$ac_file"
-       mv "$tmp/config.h" "$ac_file" \
--	|| { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
--$as_echo "$as_me: error: could not create $ac_file" >&2;}
--   { (exit 1); exit 1; }; }
-+	|| as_fn_error "could not create $ac_file" "$LINENO" 5
-     fi
-   else
-     $as_echo "/* $configure_input  */" \
-       && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
--      || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5
--$as_echo "$as_me: error: could not create -" >&2;}
--   { (exit 1); exit 1; }; }
-+      || as_fn_error "could not create -" "$LINENO" 5
-   fi
- # Compute "$ac_file"'s index in $config_headers.
- _am_arg="$ac_file"
-@@ -6980,7 +6361,7 @@ $as_echo X"$_am_arg" |
- 	  s/.*/./; q'`/stamp-h$_am_stamp_count
-  ;;
- 
--  :C)  { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5
-+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
- $as_echo "$as_me: executing $ac_file commands" >&6;}
-  ;;
-   esac
-@@ -7075,47 +6456,7 @@ $as_echo X"$file" |
- 	    q
- 	  }
- 	  s/.*/./; q'`
--      { as_dir=$dirpart/$fdir
--  case $as_dir in #(
--  -*) as_dir=./$as_dir;;
--  esac
--  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
--    as_dirs=
--    while :; do
--      case $as_dir in #(
--      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
--      *) as_qdir=$as_dir;;
--      esac
--      as_dirs="'$as_qdir' $as_dirs"
--      as_dir=`$as_dirname -- "$as_dir" ||
--$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
--	 X"$as_dir" : 'X\(//\)[^/]' \| \
--	 X"$as_dir" : 'X\(//\)$' \| \
--	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
--$as_echo X"$as_dir" |
--    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
--	    s//\1/
--	    q
--	  }
--	  /^X\(\/\/\)[^/].*/{
--	    s//\1/
--	    q
--	  }
--	  /^X\(\/\/\)$/{
--	    s//\1/
--	    q
--	  }
--	  /^X\(\/\).*/{
--	    s//\1/
--	    q
--	  }
--	  s/.*/./; q'`
--      test -d "$as_dir" && break
--    done
--    test -z "$as_dirs" || eval "mkdir $as_dirs"
--  } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
--$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
--   { (exit 1); exit 1; }; }; }
-+      as_dir=$dirpart/$fdir; as_fn_mkdir_p
-       # echo "creating $dirpart/$file"
-       echo '# dummy' > "$dirpart/$file"
-     done
-@@ -7127,15 +6468,12 @@ $as_echo "$as_me: error: cannot create d
- done # for ac_tag
- 
- 
--{ (exit 0); exit 0; }
-+as_fn_exit 0
- _ACEOF
--chmod +x $CONFIG_STATUS
- ac_clean_files=$ac_clean_files_save
- 
- test $ac_write_fail = 0 ||
--  { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5
--$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
--   { (exit 1); exit 1; }; }
-+  as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
- 
- 
- # configure is writing to config.log, and then calls config.status.
-@@ -7156,10 +6494,10 @@ if test "$no_create" != yes; then
-   exec 5>>config.log
-   # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-   # would make configure fail if this is the last instruction.
--  $ac_cs_success || { (exit 1); exit 1; }
-+  $ac_cs_success || as_fn_exit $?
- fi
- if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
--  { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
-+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
- $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
- fi
- 
diff --git a/x11/xproto/patches/patch-ad b/x11/xproto/patches/patch-ad
index 0520f81d6ac..84be9618dab 100644
--- a/x11/xproto/patches/patch-ad
+++ b/x11/xproto/patches/patch-ad
@@ -1,13 +1,13 @@
-$NetBSD: patch-ad,v 1.2 2010/09/10 20:07:29 joerg Exp $
+$NetBSD: patch-ad,v 1.3 2012/06/03 19:57:33 wiz Exp $
 
---- Xfuncproto.h.in.orig	2010-08-10 14:18:54.000000000 +0000
+--- Xfuncproto.h.in.orig	2012-03-16 06:11:44.000000000 +0000
 +++ Xfuncproto.h.in
 @@ -83,7 +83,7 @@ in this Software without prior written a
- # define _X_ATTRIBUTE_PRINTF(x,y)
  #endif /* GNUC >= 4 */
  
+ /* Added in X11R6.9, so available in any version of modular xproto */
 -#if defined(__GNUC__) && (__GNUC__ >= 4) && !defined(__CYGWIN__)
-+#if defined(__GNUC__) && (__GNUC__ >= 4) && !defined(__CYGWIN__) && !defined(__sun__)
++#if defined(__GNUC__) && (__GNUC__ >= 4) && !defined(__CYGWIN__) && !defined(__sun)
  # define _X_EXPORT      __attribute__((visibility("default")))
  # define _X_HIDDEN      __attribute__((visibility("hidden")))
  # define _X_INTERNAL    __attribute__((visibility("internal")))
diff --git a/x11/xproto/patches/patch-configure b/x11/xproto/patches/patch-configure
new file mode 100644
index 00000000000..02dfc89a70d
--- /dev/null
+++ b/x11/xproto/patches/patch-configure
@@ -0,0 +1,159 @@
+$NetBSD: patch-configure,v 1.1 2012/06/03 19:57:33 wiz Exp $
+
+--- configure.orig	2012-03-16 06:11:49.000000000 +0000
++++ configure
+@@ -1964,12 +1982,79 @@ $as_echo "$ac_res" >&6; }
+   eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ 
+ } # ac_fn_c_check_member
++
++# ac_fn_c_check_func LINENO FUNC VAR
++# ----------------------------------
++# Tests whether FUNC exists, setting the cache variable VAR accordingly
++ac_fn_c_check_func ()
++{
++  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
++$as_echo_n "checking for $2... " >&6; }
++if eval \${$3+:} false; then :
++  $as_echo_n "(cached) " >&6
++else
++  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
++/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
++   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
++#define $2 innocuous_$2
++
++/* System header to define __stub macros and hopefully few prototypes,
++    which can conflict with char $2 (); below.
++    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++    <limits.h> exists even on freestanding compilers.  */
++
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++
++#undef $2
++
++/* Override any GCC internal prototype to avoid an error.
++   Use char because int might match the return type of a GCC
++   builtin and then its argument prototype would still apply.  */
++#ifdef __cplusplus
++extern "C"
++#endif
++char $2 ();
++/* The GNU C library defines this for functions which it implements
++    to always fail with ENOSYS.  Some functions are actually named
++    something starting with __ and the normal name is an alias.  */
++#if defined __stub_$2 || defined __stub___$2
++choke me
++#endif
++
++int
++main ()
++{
++return $2 ();
++  ;
++  return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++  eval "$3=yes"
++else
++  eval "$3=no"
++fi
++rm -f core conftest.err conftest.$ac_objext \
++    conftest$ac_exeext conftest.$ac_ext
++fi
++eval ac_res=\$$3
++	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
++  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
++
++} # ac_fn_c_check_func
+ cat >config.log <<_ACEOF
+ This file contains any messages produced by compilers while
+ running configure, to aid debugging if configure makes a mistake.
+ 
+ It was created by Xproto $as_me 7.0.23, which was
+-generated by GNU Autoconf 2.68.  Invocation command line was
++generated by GNU Autoconf 2.69.  Invocation command line was
+ 
+   $ $0 $@
+ 
+@@ -11099,6 +11183,8 @@ ac_config_headers="$ac_config_headers do
+ 
+ ac_config_headers="$ac_config_headers Xfuncproto.h"
+ 
++ac_config_headers="$ac_config_headers Xos_r.h"
++
+ 
+ 
+ 
+@@ -11350,6 +11436,56 @@ $as_echo "#define NARROWPROTO /**/" >>co
+ 
+ fi
+ 
++# Handle Xos_r.h
++ac_fn_c_check_func "$LINENO" "readdir_r" "ac_cv_func_readdir_r"
++if test "x$ac_cv_func_readdir_r" = xyes; then :
++
++$as_echo "#define _XOS_R_H_MTSAFE_DIRENTAPI /**/" >>confdefs.h
++
++fi
++
++ac_fn_c_check_func "$LINENO" "getgrgid_r" "ac_cv_func_getgrgid_r"
++if test "x$ac_cv_func_getgrgid_r" = xyes; then :
++
++$as_echo "#define _XOS_R_H_MTSAFE_GRPAPI /**/" >>confdefs.h
++
++fi
++
++ac_fn_c_check_func "$LINENO" "getpwuid_r" "ac_cv_func_getpwuid_r"
++if test "x$ac_cv_func_getpwuid_r" = xyes; then :
++
++$as_echo "#define _XOS_R_H_MTSAFE_PWDAPI /**/" >>confdefs.h
++
++fi
++
++ac_fn_c_check_func "$LINENO" "gethostbyname_r" "ac_cv_func_gethostbyname_r"
++if test "x$ac_cv_func_gethostbyname_r" = xyes; then :
++
++$as_echo "#define _XOS_R_H_MTSAFE_NETDBAPI /**/" >>confdefs.h
++
++fi
++
++ac_fn_c_check_func "$LINENO" "strtok_r" "ac_cv_func_strtok_r"
++if test "x$ac_cv_func_strtok_r" = xyes; then :
++
++$as_echo "#define _XOS_R_H_MTSAFE_STRINGAPI /**/" >>confdefs.h
++
++fi
++
++ac_fn_c_check_func "$LINENO" "gmtime_r" "ac_cv_func_gmtime_r"
++if test "x$ac_cv_func_gmtime_r" = xyes; then :
++
++$as_echo "#define _XOS_R_H_MTSAFE_TIMEAPI /**/" >>confdefs.h
++
++fi
++
++ac_fn_c_check_func "$LINENO" "ttyname_r" "ac_cv_func_ttyname_r"
++if test "x$ac_cv_func_ttyname_r" = xyes; then :
++
++$as_echo "#define _XOS_R_H_MTSAFE_UNISTDAPI /**/" >>confdefs.h
++
++fi
++
+ 
+ ac_config_files="$ac_config_files Makefile specs/Makefile specs/SIAddresses/Makefile Xpoll.h xproto.pc"
+ 
+@@ -12113,6 +12237,7 @@ do
+     "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+     "do-not-use-config.h") CONFIG_HEADERS="$CONFIG_HEADERS do-not-use-config.h" ;;
+     "Xfuncproto.h") CONFIG_HEADERS="$CONFIG_HEADERS Xfuncproto.h" ;;
++    "Xos_r.h") CONFIG_HEADERS="$CONFIG_HEADERS Xos_r.h" ;;
+     "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+     "specs/Makefile") CONFIG_FILES="$CONFIG_FILES specs/Makefile" ;;
+     "specs/SIAddresses/Makefile") CONFIG_FILES="$CONFIG_FILES specs/SIAddresses/Makefile" ;;