diff options
Diffstat (limited to 'cad/gsmc')
-rw-r--r-- | cad/gsmc/DESCR | 21 | ||||
-rw-r--r-- | cad/gsmc/Makefile | 28 | ||||
-rw-r--r-- | cad/gsmc/PLIST | 3 | ||||
-rw-r--r-- | cad/gsmc/distinfo | 4 | ||||
-rw-r--r-- | cad/gsmc/files/install-sh | 276 | ||||
-rw-r--r-- | cad/gsmc/files/missing | 336 | ||||
-rw-r--r-- | cad/gsmc/files/mkinstalldirs | 111 |
7 files changed, 779 insertions, 0 deletions
diff --git a/cad/gsmc/DESCR b/cad/gsmc/DESCR new file mode 100644 index 00000000000..6b2ad1164b6 --- /dev/null +++ b/cad/gsmc/DESCR @@ -0,0 +1,21 @@ +gsmc is a GTK application that allow to do all the calculation +usually done on a Smith Chart. It permits to make calculation +for network composed by resistor, capacitor, inductance, and +transmission line (also as stub). Network topology is +limited to series, parallel and as trasmissive +for trasmission line. No series connection are allowed in parallel +branch, neither parallel connection in series branch. +Trasmission line can be placed as quadrupole or as a parallel or +series stub, either opened or shorted at the other end. + +Calculation procedure starts with setting the initial impedance to be +matched, next network elements are added and tuned to obtain the +desidered impedance value. + +The network so obtained can be saved in spice format for other analysis; +current work can be saved for succesive retrieve. + +The initial (start) impedance is thought as "the load" so when +adding a trasmission line placed as a quadrupole rotation is +clockwise, going "toward generator"; generator is placed after the +last network element, as can be seen from spice output. diff --git a/cad/gsmc/Makefile b/cad/gsmc/Makefile new file mode 100644 index 00000000000..227e08fe20e --- /dev/null +++ b/cad/gsmc/Makefile @@ -0,0 +1,28 @@ +# $NetBSD: Makefile,v 1.1.1.1 2004/10/02 05:25:18 dmcmahill Exp $ +# + +DISTNAME= gsmc-1.1 +CATEGORIES= cad +MASTER_SITES= http://www.qsl.net/ik5nax/ + +MAINTAINER= tech-pkg@NetBSD.org +HOMEPAGE= http://www.qsl.net/ik5nax/ +COMMENT= Smith charting program + +PKG_INSTALLATION_TYPES= overwrite pkgviews + +GNU_CONFIGURE= YES +USE_BUILDLINK3= YES +USE_GNU_TOOLS+= make + +# The following were just links in the distfile so +# replace them with working copies. +post-extract: +.for f in install-sh missing mkinstalldirs + ${RM} -f ${WRKSRC}/${f} + ${CP} ${FILESDIR}/${f} ${WRKSRC} + ${CHMOD} 755 ${WRKSRC}/${f} +.endfor + +.include "../../x11/gtk2/buildlink3.mk" +.include "../../mk/bsd.pkg.mk" diff --git a/cad/gsmc/PLIST b/cad/gsmc/PLIST new file mode 100644 index 00000000000..c4f2eaebcb2 --- /dev/null +++ b/cad/gsmc/PLIST @@ -0,0 +1,3 @@ +@comment $NetBSD: PLIST,v 1.1.1.1 2004/10/02 05:25:18 dmcmahill Exp $ +bin/gsmc +man/man1/gsmc.1 diff --git a/cad/gsmc/distinfo b/cad/gsmc/distinfo new file mode 100644 index 00000000000..9333830007b --- /dev/null +++ b/cad/gsmc/distinfo @@ -0,0 +1,4 @@ +$NetBSD: distinfo,v 1.1.1.1 2004/10/02 05:25:18 dmcmahill Exp $ + +SHA1 (gsmc-1.1.tar.gz) = bff9098ecf8e40a720bcc2d60a868f7aaa2d3e59 +Size (gsmc-1.1.tar.gz) = 122714 bytes diff --git a/cad/gsmc/files/install-sh b/cad/gsmc/files/install-sh new file mode 100644 index 00000000000..36f96f3e033 --- /dev/null +++ b/cad/gsmc/files/install-sh @@ -0,0 +1,276 @@ +#!/bin/sh +# +# install - install a program, script, or datafile +# This comes from X11R5 (mit/util/scripts/install.sh). +# +# Copyright 1991 by the Massachusetts Institute of Technology +# +# Permission to use, copy, modify, distribute, and sell this software and its +# documentation for any purpose is hereby granted without fee, provided that +# the above copyright notice appear in all copies and that both that +# copyright notice and this permission notice appear in supporting +# documentation, and that the name of M.I.T. not be used in advertising or +# publicity pertaining to distribution of the software without specific, +# written prior permission. M.I.T. makes no representations about the +# suitability of this software for any purpose. It is provided "as is" +# without express or implied warranty. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. It can only install one file at a time, a restriction +# shared with many OS's install programs. + + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" + + +# put in absolute paths if you don't have them in your path; or use env. vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +transformbasename="" +transform_arg="" +instcmd="$mvprog" +chmodcmd="$chmodprog 0755" +chowncmd="" +chgrpcmd="" +stripcmd="" +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src="" +dst="" +dir_arg="" + +while [ x"$1" != x ]; do + case $1 in + -c) instcmd=$cpprog + shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + -s) stripcmd=$stripprog + shift + continue;; + + -t=*) transformarg=`echo $1 | sed 's/-t=//'` + shift + continue;; + + -b=*) transformbasename=`echo $1 | sed 's/-b=//'` + shift + continue;; + + *) if [ x"$src" = x ] + then + src=$1 + else + # this colon is to work around a 386BSD /bin/sh bug + : + dst=$1 + fi + shift + continue;; + esac +done + +if [ x"$src" = x ] +then + echo "$0: no input file specified" >&2 + exit 1 +else + : +fi + +if [ x"$dir_arg" != x ]; then + dst=$src + src="" + + if [ -d "$dst" ]; then + instcmd=: + chmodcmd="" + else + instcmd=$mkdirprog + fi +else + +# Waiting for this to be detected by the "$instcmd $src $dsttmp" command +# might cause directories to be created, which would be especially bad +# if $src (and thus $dsttmp) contains '*'. + + if [ -f "$src" ] || [ -d "$src" ] + then + : + else + echo "$0: $src does not exist" >&2 + exit 1 + fi + + if [ x"$dst" = x ] + then + echo "$0: no destination specified" >&2 + exit 1 + else + : + fi + +# If destination is a directory, append the input filename; if your system +# does not like double slashes in filenames, you may need to add some logic + + if [ -d "$dst" ] + then + dst=$dst/`basename "$src"` + else + : + fi +fi + +## this sed command emulates the dirname command +dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` + +# Make sure that the destination directory exists. +# this part is taken from Noah Friedman's mkinstalldirs script + +# Skip lots of stat calls in the usual case. +if [ ! -d "$dstdir" ]; then +defaultIFS=' + ' +IFS="${IFS-$defaultIFS}" + +oIFS=$IFS +# Some sh's can't handle IFS=/ for some reason. +IFS='%' +set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` +IFS=$oIFS + +pathcomp='' + +while [ $# -ne 0 ] ; do + pathcomp=$pathcomp$1 + shift + + if [ ! -d "$pathcomp" ] ; + then + $mkdirprog "$pathcomp" + else + : + fi + + pathcomp=$pathcomp/ +done +fi + +if [ x"$dir_arg" != x ] +then + $doit $instcmd "$dst" && + + if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi +else + +# If we're going to rename the final executable, determine the name now. + + if [ x"$transformarg" = x ] + then + dstfile=`basename "$dst"` + else + dstfile=`basename "$dst" $transformbasename | + sed $transformarg`$transformbasename + fi + +# don't allow the sed command to completely eliminate the filename + + if [ x"$dstfile" = x ] + then + dstfile=`basename "$dst"` + else + : + fi + +# Make a couple of temp file names in the proper directory. + + dsttmp=$dstdir/#inst.$$# + rmtmp=$dstdir/#rm.$$# + +# Trap to clean up temp files at exit. + + trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0 + trap '(exit $?); exit' 1 2 13 15 + +# Move or copy the file name to the temp name + + $doit $instcmd "$src" "$dsttmp" && + +# and set any options; do chmod last to preserve setuid bits + +# If any of these fail, we abort the whole thing. If we want to +# ignore errors from any of these, just make sure not to ignore +# errors from the above "$doit $instcmd $src $dsttmp" command. + + if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi && + +# Now remove or move aside any old file at destination location. We try this +# two ways since rm can't unlink itself on some systems and the destination +# file might be busy for other reasons. In this case, the final cleanup +# might fail but the new file should still install successfully. + +{ + if [ -f "$dstdir/$dstfile" ] + then + $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null || + $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null || + { + echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 + (exit 1); exit + } + else + : + fi +} && + +# Now rename the file to the real destination. + + $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" + +fi && + +# The final little trick to "correctly" pass the exit status to the exit trap. + +{ + (exit 0); exit +} diff --git a/cad/gsmc/files/missing b/cad/gsmc/files/missing new file mode 100644 index 00000000000..6a37006e8f0 --- /dev/null +++ b/cad/gsmc/files/missing @@ -0,0 +1,336 @@ +#! /bin/sh +# Common stub for a few missing GNU programs while installing. +# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc. +# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 +fi + +run=: + +# In the cases where this matters, `missing' is being run in the +# srcdir already. +if test -f configure.ac; then + configure_ac=configure.ac +else + configure_ac=configure.in +fi + +case "$1" in +--run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + ;; +esac + +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case "$1" in + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +error status if there is no known handling for PROGRAM. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails + +Supported PROGRAM values: + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file + lex create \`lex.yy.c', if possible, from existing .c + makeinfo touch the output file + tar try tar, gnutar, gtar, then tar without non-portable flags + yacc create \`y.tab.[ch]', if possible, from existing .[ch]" + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing 0.4 - GNU automake" + ;; + + -*) + echo 1>&2 "$0: Unknown \`$1' option" + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + ;; + + aclocal*) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified \`acinclude.m4' or \`${configure_ac}'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 + ;; + + autoconf) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified \`${configure_ac}'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure + ;; + + autoheader) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified \`acconfig.h' or \`${configure_ac}'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` + test -z "$files" && files="config.h" + touch_files= + for f in $files; do + case "$f" in + *:*) touch_files="$touch_files "`echo "$f" | + sed -e 's/^[^:]*://' -e 's/:.*//'`;; + *) touch_files="$touch_files $f.in";; + esac + done + touch $touch_files + ;; + + automake*) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print | + sed 's/\.am$/.in/' | + while read f; do touch "$f"; done + ;; + + autom4te) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + + echo 1>&2 "\ +WARNING: \`$1' is needed, and you do not seem to have it handy on your + system. You might have modified some files without having the + proper tools for further handling them. + You can get \`$1Help2man' as part of \`Autoconf' from any GNU + archive site." + + file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` + test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo "#! /bin/sh" + echo "# Created by GNU Automake missing as a replacement of" + echo "# $ $@" + echo "exit 0" + chmod +x $file + exit 1 + fi + ;; + + bison|yacc) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." + rm -f y.tab.c y.tab.h + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.y) + SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.c + fi + SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.h + fi + ;; + esac + fi + if [ ! -f y.tab.h ]; then + echo >y.tab.h + fi + if [ ! -f y.tab.c ]; then + echo 'main() { return 0; }' >y.tab.c + fi + ;; + + lex|flex) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." + rm -f lex.yy.c + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.l) + SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" lex.yy.c + fi + ;; + esac + fi + if [ ! -f lex.yy.c ]; then + echo 'main() { return 0; }' >lex.yy.c + fi + ;; + + help2man) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` + fi + if [ -f "$file" ]; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit 1 + fi + ;; + + makeinfo) + if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then + # We have makeinfo, but it failed. + exit 1 + fi + + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` + fi + touch $file + ;; + + tar) + shift + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + fi + + # We have already tried tar in the generic part. + # Look for gnutar/gtar before invocation to avoid ugly error + # messages. + if (gnutar --version > /dev/null 2>&1); then + gnutar "$@" && exit 0 + fi + if (gtar --version > /dev/null 2>&1); then + gtar "$@" && exit 0 + fi + firstarg="$1" + if shift; then + case "$firstarg" in + *o*) + firstarg=`echo "$firstarg" | sed s/o//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + case "$firstarg" in + *h*) + firstarg=`echo "$firstarg" | sed s/h//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + fi + + echo 1>&2 "\ +WARNING: I can't seem to be able to run \`tar' with the given arguments. + You may want to install GNU tar or Free paxutils, or check the + command line arguments." + exit 1 + ;; + + *) + echo 1>&2 "\ +WARNING: \`$1' is needed, and you do not seem to have it handy on your + system. You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, + it often tells you about the needed prerequirements for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 + ;; +esac + +exit 0 diff --git a/cad/gsmc/files/mkinstalldirs b/cad/gsmc/files/mkinstalldirs new file mode 100644 index 00000000000..d2d5f21b611 --- /dev/null +++ b/cad/gsmc/files/mkinstalldirs @@ -0,0 +1,111 @@ +#! /bin/sh +# mkinstalldirs --- make directory hierarchy +# Author: Noah Friedman <friedman@prep.ai.mit.edu> +# Created: 1993-05-16 +# Public domain + +errstatus=0 +dirmode="" + +usage="\ +Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..." + +# process command line arguments +while test $# -gt 0 ; do + case $1 in + -h | --help | --h*) # -h for help + echo "$usage" 1>&2 + exit 0 + ;; + -m) # -m PERM arg + shift + test $# -eq 0 && { echo "$usage" 1>&2; exit 1; } + dirmode=$1 + shift + ;; + --) # stop option processing + shift + break + ;; + -*) # unknown option + echo "$usage" 1>&2 + exit 1 + ;; + *) # first non-opt arg + break + ;; + esac +done + +for file +do + if test -d "$file"; then + shift + else + break + fi +done + +case $# in + 0) exit 0 ;; +esac + +case $dirmode in + '') + if mkdir -p -- . 2>/dev/null; then + echo "mkdir -p -- $*" + exec mkdir -p -- "$@" + fi + ;; + *) + if mkdir -m "$dirmode" -p -- . 2>/dev/null; then + echo "mkdir -m $dirmode -p -- $*" + exec mkdir -m "$dirmode" -p -- "$@" + fi + ;; +esac + +for file +do + set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` + shift + + pathcomp= + for d + do + pathcomp="$pathcomp$d" + case $pathcomp in + -*) pathcomp=./$pathcomp ;; + esac + + if test ! -d "$pathcomp"; then + echo "mkdir $pathcomp" + + mkdir "$pathcomp" || lasterr=$? + + if test ! -d "$pathcomp"; then + errstatus=$lasterr + else + if test ! -z "$dirmode"; then + echo "chmod $dirmode $pathcomp" + lasterr="" + chmod "$dirmode" "$pathcomp" || lasterr=$? + + if test ! -z "$lasterr"; then + errstatus=$lasterr + fi + fi + fi + fi + + pathcomp="$pathcomp/" + done +done + +exit $errstatus + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# End: +# mkinstalldirs ends here |