8 files changed, 1 insertions, 126 deletions
diff --git a/comms/Makefile b/comms/Makefile
index 5417ede08a4..058b72d5113 100644
--- a/comms/Makefile
+++ b/comms/Makefile
@@ -1,4 +1,4 @@
-# $NetBSD: Makefile,v 1.85 2011/10/02 14:11:51 wiz Exp $
+# $NetBSD: Makefile,v 1.86 2011/10/02 14:32:32 wiz Exp $
 #
 
 COMMENT=	Communication utilities
@@ -72,6 +72,5 @@ SUBDIR+=	tkhylafax
 SUBDIR+=	tn3270
 SUBDIR+=	xisp
 SUBDIR+=	xtel
-SUBDIR+=	zaptel-netbsd
 
 .include "../mk/misc/category.mk"
diff --git a/comms/zaptel-netbsd/DESCR b/comms/zaptel-netbsd/DESCR
deleted file mode 100644
index 27c03fdffbe..00000000000
--- a/comms/zaptel-netbsd/DESCR
+++ /dev/null
@@ -1,11 +0,0 @@
-This package provides the "zaptel" drivers, which support the Asterisk
-software PBX, ported to NetBSD.
-
-These are some drivers and auxiliary tools for NetBSD in support of
-the Asterisk PBX.  The wcfxo driver supports the Wildcard X100P/X101P and
-clones, the wcfxs driver supports the Wildcard TDM400p, and the ztdummy
-driver provides a software-only timer device which makes conferencing
-work much better. (That is, if you run Asterisk, you may want these
-drivers even if you don't have any of the hardware)
-
-The T1 board driver has not yet been ported.
diff --git a/comms/zaptel-netbsd/MESSAGE b/comms/zaptel-netbsd/MESSAGE
deleted file mode 100644
index 6acabe4b36f..00000000000
--- a/comms/zaptel-netbsd/MESSAGE
+++ /dev/null
@@ -1,19 +0,0 @@
-===========================================================================
-$NetBSD: MESSAGE,v 1.1.1.1 2005/04/08 03:03:42 riz Exp $
-To have the zaptel modules automatically loaded at boot time, add the
-following to /etc/lkm.conf:
-
-${PREFIX}/lkm/mod_zaptel.o -s - ${PREFIX}/sbin/zaptel_postinstall - -
-# Uncomment the drivers you want; use mod_ztdummy.o only if you have
-# no hardware
-#${PREFIX}/lkm/mod_ztdummy.o -s - - - -
-#${PREFIX}/lkm/mod_wcfxo.o -s - - - -
-#${PREFIX}/lkm/mod_wcfxs.o -s - - - -
-
-And then add 'lkm=YES' to /etc/rc.conf.  Refer to lkm.conf(5) for
-additional details.  (Make sure to uncomment the appropriate lines for
-your hardware, or lack thereof)
-
-The script ${PREFIX}/sbin/zaptel_postinstall creates the relevant device
-nodes in /dev, and can be used independently.
-===========================================================================
diff --git a/comms/zaptel-netbsd/Makefile b/comms/zaptel-netbsd/Makefile
deleted file mode 100644
index 8959d22ec9f..00000000000
--- a/comms/zaptel-netbsd/Makefile
+++ /dev/null
@@ -1,33 +0,0 @@
-# $NetBSD: Makefile,v 1.8 2010/03/07 23:56:17 jnemeth Exp $
-#
-
-DISTNAME=		zaptel-netbsd-20060127
-PKGREVISION=		1
-CATEGORIES=		comms
-MASTER_SITES=		http://www.tastylime.net/netbsd/zaptel/
-EXTRACT_SUFX=		.tar.bz2
-
-MAINTAINER=	pkgsrc-users@NetBSD.org
-HOMEPAGE=	http://www.tastylime.net/netbsd/zaptel/
-COMMENT=	The "zaptel" drivers and utils for the Asterisk Software PBX
-
-ONLY_FOR_PLATFORM=	NetBSD-[2-4]*-*
-INSTALLATION_DIRS=	lkm
-
-ZAPTEL_KERNEL_ENV?=	# empty
-BUILD_DEFS+=		ZAPTEL_KERNEL_ENV
-MAKE_ENV+=		ZAPTEL_KERNEL_ENV=${ZAPTEL_KERNEL_ENV:Q}
-MAKE_ENV+=		BSDSRCDIR=${BSDSRCDIR}
-CONF_FILES=		${PREFIX}/share/examples/zaptel/zaptel.conf \
-			${PKG_SYSCONFDIR}/zaptel.conf
-
-RCD_SCRIPTS=		ztcfg
-
-.include "../../mk/bsd.prefs.mk"
-
-.if !exists(${BSDSRCDIR}/sys)
-PKG_FAIL_REASON+=	"${PKGNAME} needs kernel sources in ${BSDSRCDIR}."
-.endif
-
-.include "../../devel/newt/buildlink3.mk"
-.include "../../mk/bsd.pkg.mk"
diff --git a/comms/zaptel-netbsd/PLIST b/comms/zaptel-netbsd/PLIST
deleted file mode 100644
index 0220ea93410..00000000000
--- a/comms/zaptel-netbsd/PLIST
+++ /dev/null
@@ -1,16 +0,0 @@
-@comment $NetBSD: PLIST,v 1.4 2009/06/14 18:31:59 joerg Exp $
-bin/fxo_test
-bin/ztcfg
-bin/ztmonitor
-bin/zttest
-bin/zttool
-include/tonezone.h
-include/zaptel.h
-lib/libtonezone.a
-lkm/mod_wcfxo.o
-lkm/mod_wcfxs.o
-lkm/mod_zaptel.o
-lkm/mod_ztdummy.o
-sbin/zaptel_postinstall
-share/examples/rc.d/ztcfg
-share/examples/zaptel/zaptel.conf
diff --git a/comms/zaptel-netbsd/buildlink3.mk b/comms/zaptel-netbsd/buildlink3.mk
deleted file mode 100644
index f0cd577f489..00000000000
--- a/comms/zaptel-netbsd/buildlink3.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-# $NetBSD: buildlink3.mk,v 1.8 2009/03/20 19:24:03 joerg Exp $
-
-BUILDLINK_TREE+=	zaptel-netbsd
-
-.if !defined(ZAPTEL_NETBSD_BUILDLINK3_MK)
-ZAPTEL_NETBSD_BUILDLINK3_MK:=
-
-BUILDLINK_API_DEPENDS.zaptel-netbsd+=	zaptel-netbsd>=20050314
-BUILDLINK_ABI_DEPENDS.zaptel-netbsd?=	zaptel-netbsd>=20060127nb1
-BUILDLINK_PKGSRCDIR.zaptel-netbsd?=	../../comms/zaptel-netbsd
-BUILDLINK_DEPMETHOD.zaptel-netbsd?=	build
-
-.include "../../devel/newt/buildlink3.mk"
-.endif # ZAPTEL_NETBSD_BUILDLINK3_MK
-
-BUILDLINK_TREE+=	-zaptel-netbsd
diff --git a/comms/zaptel-netbsd/distinfo b/comms/zaptel-netbsd/distinfo
deleted file mode 100644
index 91ca1892d22..00000000000
--- a/comms/zaptel-netbsd/distinfo
+++ /dev/null
@@ -1,5 +0,0 @@
-$NetBSD: distinfo,v 1.2 2006/02/01 00:10:53 riz Exp $
-
-SHA1 (zaptel-netbsd-20060127.tar.bz2) = c4417c74beb43ec023a0118ea0e4f29bc6bce999
-RMD160 (zaptel-netbsd-20060127.tar.bz2) = 6676580715ac09bb380dcdc8886c79180d493535
-Size (zaptel-netbsd-20060127.tar.bz2) = 161209 bytes
diff --git a/comms/zaptel-netbsd/files/ztcfg.sh b/comms/zaptel-netbsd/files/ztcfg.sh
deleted file mode 100644
index 4d0075c1c0d..00000000000
--- a/comms/zaptel-netbsd/files/ztcfg.sh
+++ /dev/null
@@ -1,24 +0,0 @@
-#!@RCD_SCRIPTS_SHELL@
-#
-# $NetBSD: ztcfg.sh,v 1.1.1.1 2005/04/08 03:03:42 riz Exp $
-#
-# PROVIDE: ztcfg
-# REQUIRE: aftermountlkm
-# BEFORE: asterisk
-#
-# You will need to set some variables in /etc/rc.conf to run ztcfg:
-#
-# ztcfg=YES
-
-if [ -f /etc/rc.subr ]
-then
-	. /etc/rc.subr
-fi
-
-name="ztcfg"
-rcvar=$name
-command="@PREFIX@/bin/ztcfg"
-required_files="@PKG_SYSCONFDIR@/zaptel.conf"
-
-load_rc_config $name
-run_rc_command "$1"