7 files changed, 123 insertions, 0 deletions
diff --git a/comms/zaptel-netbsd/DESCR b/comms/zaptel-netbsd/DESCR
new file mode 100644
index 00000000000..27c03fdffbe
--- /dev/null
+++ b/comms/zaptel-netbsd/DESCR
@@ -0,0 +1,11 @@
+This package provides the "zaptel" drivers, which support the Asterisk
+software PBX, ported to NetBSD.
+
+These are some drivers and auxiliary tools for NetBSD in support of
+the Asterisk PBX.  The wcfxo driver supports the Wildcard X100P/X101P and
+clones, the wcfxs driver supports the Wildcard TDM400p, and the ztdummy
+driver provides a software-only timer device which makes conferencing
+work much better. (That is, if you run Asterisk, you may want these
+drivers even if you don't have any of the hardware)
+
+The T1 board driver has not yet been ported.
diff --git a/comms/zaptel-netbsd/MESSAGE b/comms/zaptel-netbsd/MESSAGE
new file mode 100644
index 00000000000..6acabe4b36f
--- /dev/null
+++ b/comms/zaptel-netbsd/MESSAGE
@@ -0,0 +1,19 @@
+===========================================================================
+$NetBSD: MESSAGE,v 1.1.1.1 2005/04/08 03:03:42 riz Exp $
+To have the zaptel modules automatically loaded at boot time, add the
+following to /etc/lkm.conf:
+
+${PREFIX}/lkm/mod_zaptel.o -s - ${PREFIX}/sbin/zaptel_postinstall - -
+# Uncomment the drivers you want; use mod_ztdummy.o only if you have
+# no hardware
+#${PREFIX}/lkm/mod_ztdummy.o -s - - - -
+#${PREFIX}/lkm/mod_wcfxo.o -s - - - -
+#${PREFIX}/lkm/mod_wcfxs.o -s - - - -
+
+And then add 'lkm=YES' to /etc/rc.conf.  Refer to lkm.conf(5) for
+additional details.  (Make sure to uncomment the appropriate lines for
+your hardware, or lack thereof)
+
+The script ${PREFIX}/sbin/zaptel_postinstall creates the relevant device
+nodes in /dev, and can be used independently.
+===========================================================================
diff --git a/comms/zaptel-netbsd/Makefile b/comms/zaptel-netbsd/Makefile
new file mode 100644
index 00000000000..ea89b616be6
--- /dev/null
+++ b/comms/zaptel-netbsd/Makefile
@@ -0,0 +1,26 @@
+# $NetBSD: Makefile,v 1.1.1.1 2005/04/08 03:03:42 riz Exp $
+#
+
+DISTNAME=		zaptel-netbsd-20050404
+CATEGORIES=		comms
+MASTER_SITES=		http://www.tastylime.net/netbsd/zaptel/
+EXTRACT_SUFX=		.tar.bz2
+
+MAINTAINER=	riz@NetBSD.org
+HOMEPAGE=	http://www.tastylime.net/netbsd/zaptel/
+COMMENT=	The "zaptel" drivers and utils for the Asterisk Software PBX
+
+ONLY_FOR_PLATFORM=	NetBSD-[2-9]*-*
+INSTALLATION_DIRS=	lkm
+
+ZAPTEL_KERNEL_ENV?=	# empty
+BUILD_DEFS+=		ZAPTEL_KERNEL_ENV
+MAKE_ENV+=		ZAPTEL_KERNEL_ENV=${ZAPTEL_KERNEL_ENV:Q}
+CONF_FILES=		${PREFIX}/share/examples/zaptel/zaptel.conf \
+			${PKG_SYSCONFDIR}/zaptel.conf
+
+USE_PKGINSTALL=		yes
+RCD_SCRIPTS=		ztcfg
+
+.include "../../devel/newt/buildlink3.mk"
+.include "../../mk/bsd.pkg.mk"
diff --git a/comms/zaptel-netbsd/PLIST b/comms/zaptel-netbsd/PLIST
new file mode 100644
index 00000000000..84871e8b31e
--- /dev/null
+++ b/comms/zaptel-netbsd/PLIST
@@ -0,0 +1,17 @@
+@comment $NetBSD: PLIST,v 1.1.1.1 2005/04/08 03:03:42 riz Exp $
+bin/fxo_test
+bin/ztcfg
+bin/ztmonitor
+bin/zttest
+bin/zttool
+include/tonezone.h
+include/zaptel.h
+lib/libtonezone.a
+lkm/mod_wcfxo.o
+lkm/mod_wcfxs.o
+lkm/mod_zaptel.o
+lkm/mod_ztdummy.o
+sbin/zaptel_postinstall
+share/examples/zaptel/zaptel.conf
+@dirrm share/examples/zaptel
+@unexec ${RMDIR} %D/lkm 2>/dev/null || ${TRUE}
diff --git a/comms/zaptel-netbsd/buildlink3.mk b/comms/zaptel-netbsd/buildlink3.mk
new file mode 100644
index 00000000000..7dc298ed8b4
--- /dev/null
+++ b/comms/zaptel-netbsd/buildlink3.mk
@@ -0,0 +1,21 @@
+# $NetBSD: buildlink3.mk,v 1.1.1.1 2005/04/08 03:03:42 riz Exp $
+
+BUILDLINK_DEPTH:=		${BUILDLINK_DEPTH}+
+ZAPTEL_NETBSD_BUILDLINK3_MK:=	${ZAPTEL_NETBSD_BUILDLINK3_MK}+
+
+.if !empty(BUILDLINK_DEPTH:M+)
+BUILDLINK_DEPENDS+=	zaptel-netbsd
+.endif
+
+BUILDLINK_PACKAGES:=	${BUILDLINK_PACKAGES:Nzaptel-netbsd}
+BUILDLINK_PACKAGES+=	zaptel-netbsd
+
+.if !empty(ZAPTEL_NETBSD_BUILDLINK3_MK:M+)
+BUILDLINK_DEPENDS.zaptel-netbsd+=	zaptel-netbsd>=20050314
+BUILDLINK_PKGSRCDIR.zaptel-netbsd?=	../../comms/zaptel-netbsd
+BUILDLINK_DEPMETHOD.zaptel-netbsd?=	build
+.endif	# ZAPTEL_NETBSD_BUILDLINK3_MK
+
+.include "../../wip/newt/buildlink3.mk"
+
+BUILDLINK_DEPTH:=     ${BUILDLINK_DEPTH:S/+$//}
diff --git a/comms/zaptel-netbsd/distinfo b/comms/zaptel-netbsd/distinfo
new file mode 100644
index 00000000000..02a16e68fb1
--- /dev/null
+++ b/comms/zaptel-netbsd/distinfo
@@ -0,0 +1,5 @@
+$NetBSD: distinfo,v 1.1.1.1 2005/04/08 03:03:42 riz Exp $
+
+SHA1 (zaptel-netbsd-20050404.tar.bz2) = 71f09b49a808ded0ac62558c2ccdb36969c5553f
+RMD160 (zaptel-netbsd-20050404.tar.bz2) = d10398a74a8b00299db08fb06ac767145667a674
+Size (zaptel-netbsd-20050404.tar.bz2) = 114012 bytes
diff --git a/comms/zaptel-netbsd/files/ztcfg.sh b/comms/zaptel-netbsd/files/ztcfg.sh
new file mode 100644
index 00000000000..4d0075c1c0d
--- /dev/null
+++ b/comms/zaptel-netbsd/files/ztcfg.sh
@@ -0,0 +1,24 @@
+#!@RCD_SCRIPTS_SHELL@
+#
+# $NetBSD: ztcfg.sh,v 1.1.1.1 2005/04/08 03:03:42 riz Exp $
+#
+# PROVIDE: ztcfg
+# REQUIRE: aftermountlkm
+# BEFORE: asterisk
+#
+# You will need to set some variables in /etc/rc.conf to run ztcfg:
+#
+# ztcfg=YES
+
+if [ -f /etc/rc.subr ]
+then
+	. /etc/rc.subr
+fi
+
+name="ztcfg"
+rcvar=$name
+command="@PREFIX@/bin/ztcfg"
+required_files="@PKG_SYSCONFDIR@/zaptel.conf"
+
+load_rc_config $name
+run_rc_command "$1"