| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
|
|
|
|
so shouldn't need to the buildlink magic.
|
|
|
|
|
|
have been converted to USE_BUILDLINK2.
|
|
(ah the joys of student access machines).
* much better support for cross compiling
* straighten out ANSI-conforming compiler checks
* avoid harmless compiler warnings reported by -Wcast-align
* fixed some sign extension problems on rather exotic machines where
sizeof(size_t) < sizeof(ptrdiff_t) and sizeof(lzo_uint) == sizeof(size_t)
* updated the configure system to use the latest Autoconf, Automake
and Libtool versions
|
|
|
|
|
|
Jamjar is the Acunia version of the jar archiver tool.
|
|
changes since 0.5:
* pkgsrc fixes for 0.5 integrated
* support for the Quantum compression method reverse-engineered by
Matthew Russotto
* cabextract now exhaustively searches your files for cabinets.
If there's more than one cabinet in the same file, cabextract will
find those too.
* Spanning cabinets sets contain both a 'next' and 'previous' cabinet
name. cabextract now searches backwards through the cabinet chain
to find the start of a cabinet set, before searching in the forwards
direction as usual.
|
|
software instead of any base system version. This match is probably too
broad, but better to err on the safe side. We can narrow down the match
when we have better information.
Closes pkg/17775 by Julien T. Letessier <julien.letessier at sun dot com>.
|
|
INCOMPAT_GETTEXT that are analogous to INCOMPAT_ICONV and contain lists of
shell wildcards intended to match against ${MACHINE_PLATFORM}. These
variables are used to note those platforms that have the named packages in
the base system but are incompatible in some way from the pkgsrc version
of the same package. Change INCOMPAT_CURSES to have the same sematics as
above. These variables allow much greater precision in specifying which
platforms have broken (for the purposes of pkgsrc) versions of software in
the base system that must be ignored.
The buildlink.mk files for these packages define private _INCOMPAT_*
versions of these variables, and they contain the default lists of
platforms that are known to have incompatible software bits.
This addresses pkg/17775 submitted by Julien T. Letessier
<julien.letessier at sun dot com>.
|
|
even multivolume ones:
1. We introduced WinRAR 3.0 discount program, so a single user
license now is only $29.
As always, already registered users do not need to pay again.
RAR 1.x - 2.x registration is valid for 3.0 too.
New international RAR site is www.rarlab.com. You may visit it
to download latest versions and register RAR.
Also do not forget that we have a lot of regional sites processing
RAR registrations. Complete list is available in rar_site.txt.
2. Compression algorithm improved. Changes include:
a) dictionary size is increased to 4 MB, this helps to increase
compression on large data sets;
b) a special algorithm for text data, based on Dmitry Shkarin's
PPMII sources: ftp://ftp.elf.stuba.sk/pub/pc/pack/ppmdh.rar
We express our sincere gratitude and respect to Dmitry for
his excellent PPMII;
c) special preprocessing algorithms for 32-bit x86 executables,
Itanium executables, true color data, audio data and tables.
In many cases significantly increasing compression;
d) now RAR chooses the best combination of algorithms automatically,
so "Multimedia compression" mode and switch -mm are obsolete.
By default, RAR uses only the general compression algorithm
in the "Fast" and "Fastest" compression methods (-m1 and -m2),
advanced algorithms such as audio and true color processing are
enabled only in "Normal"..."Best" (-m3..-m5) modes, the advanced
text compression is activated only in "Good" and "Best"
compression (-m4..-m5). This default can be overridden using
the -mc switch.
RAR 3.0 archives can be unpacked by any RAR version beginning
from RAR 2.9, currently it is 2.9 and 3.0. RAR 3.0 can unpack
archives created by all older RAR versions.
3. Encryption algorithm is changed to AES (Advanced Encryption Standard)
with 128 bit key length.
4. Francesco Indrio <naradamoon@operamail.com>, <naradamoon@libero.it>
has once again done a nice job redesigning WinRAR graphics.
5. "Wizard" command helps novice users to perform basic
archive operations in simple, step by step mode.
Just click on Wizard button on the toolbar and choose
an operation which you want to perform.
6. "Send archive by email" option in the "Files" part of archiving
dialog. Your email program must support MAPI interface,
otherwise this option will not work.
In the command line mode you may use -ieml[.][addr] switch
to send a created archive by email.
7. WinRAR adds "Compress and email" item to Explorer context menu.
8. Default volume naming scheme is changed from volname.rar,
volname.r00, ..., to volname.part001.rar, volname.part002.rar, etc.
Switch -vn and "Old style volumes names" option in the archiving
dialog allow to use the old extension based scheme.
9. Added support of so called recovery volumes (.rev files),
which can be used to reconstruct missing files in a volume set.
One .rev file allows to reconstruct one missing RAR volume,
for example, 5 .rev files are able to reconstruct any 5 volumes.
In WinRAR you may create recovery volumes either specifying
their number in the archiving dialog or using "Protect" command
inside of the first volume.
In the command line RAR it can be done by the command 'rv[n]'
or switch -rv[n].
RAR and WinRAR automatically use .rev files to reconstruct
missing volumes when unpacking or testing a volume set.
It is also possible to double click on .rev file in WinRAR shell
or use the command 'rc' in the command line to force reconstructing.
I wish to thank developers of Mirror program, who invented
this idea and proposed to implement it in WinRAR.
10. SFX modules:
a) Windows SFX modules now support archives larger than 4 GB
and Unicode names;
b) It is possible to replace the standard SFX icon with your own.
Just specify the icon file name in "Load SFX icon from the file"
field of "Advanced SFX options/Text and icon" dialog.
c) new "Shortcut=DestType,SrcName,DestFolder,Description"
SFX script command allows to create shortcuts to unpacked
files on Desktop, Start Menu, Start Menu/Programs or Startup.
This feature is also available through "Shortcuts" list
in the "Advanced SFX options" WinRAR dialog;
d) modified syntax of TempMode SFX script command. It now uses
comma instead of '@' as a question and title separator.
It is important only for those users, who write SFX script
manually instead of specifying SFX parameters in WinRAR
"Advanced SFX options" dialog;
e) "Delete" SFX script command and "Files to delete" field
in "Advanced SFX options" dialog may include wildcard masks.
For example:
Delete=*.tmp
f) removed "Allow external signature" advanced SFX option
and the corresponding "ExtSign" script command.
RAR 3.0 archive format includes the end of archive marker,
so SFX module automatically stops extraction when reaching
the end of archive and all data appended to archive are
ignored by default;
g) if you specified INF file in SFX "Setup" command, SFX will
attempt to install it instead of opening its contents
in Notepad as in the previous version;
h) the new DOS SFX module is 32-bit, so it is not limited to 64 KB
dictionary more and can unpack any RAR 3.0 archives regardless
of dictionary size;
i) "SFX options" button in the archiving dialog opens directly
"Advanced SFX options" without intermediate selection of
SFX module. If you need to change SFX type, use "Module"
page in the advanced SFX options.
Please note that new SFX modules are able to unpack only RAR 3.0
archives. They must not be used with archives created by older
RAR versions.
11. Switch -hp<pwd> can be used instead of -p<pwd> to encrypt
both file data and file headers, so such information as file
names, sizes, comments will not be visible without a password.
"Encrypt file names" option in the password dialog provides
the same function in WinRAR shell.
12. Added support for ISO9660 (.iso) file format, which is widely
used to store CD images. WinRAR is able to browse and unpack
contents of ISO files. WinRAR also supports Joliet extension
of ISO9660 and displays long file names inside of Joliet CD images.
13. Using switch -mc you may set advanced compression parameters
such as prediction order and memory size for the text compression
algorithm. It is also possible in WinRAR shell using "Compression..."
button in the "Advanced" part of archiving dialog.
14. Switch -ms allows to specify files, which will be stored
without compression. For example, -msrar;zip;jpg.
It helps to increase archiving speed without noticeable
loss in the compression ratio.
The same option is available in WinRAR shell through
"Files to store without compression" field in the advanced
part of the archiving dialog.
15. "Info" command now is available also outside of archives,
when working with uncompressed files. One task of this command
is getting information about selected files, another is
performing miscellaneous operations with groups of archives.
After the files scan step is completed, you may switch to
other pages of the dialog and apply commands like "Comment"
and "SFX" to all found RAR and ZIP archives.
"Info" replaces "Estimate" command, which function is available
as a part of the information dialog. Amount of estimation information
is reduced, because an accuracy of Estimate results was not enough
to provide reliable results for different compression methods.
16. "Comment", "Protect", "SFX", "Lock" and "Extract" WinRAR commands
can be also used outside of archives. Their buttons are disabled
by default, but you may enable them in toolbar settings or
use "Commands" menu. "Repair" command is also available
inside of archives.
17. "Test archived files" WinRAR option and the command line switch -t
allow to test files after archiving. This option is especially
useful in combination with the move command, so files will be
deleted only if archive had been successfully tested.
18. "Backup" part of the archiving dialog provides two new file
time selecting modes allowing to archive files modified
before or after the specified date.
19. Switches -ta<date> and -tb<date> allow to add or extract files
modified after or before the specified date. Date format
is YYYYMMDDHHMMSS. It is allowed to insert separators like '-'
or ':' to date string and omit trailing fields. For example,
the following switch is correct: -ta2001-11-20.
20. Switch -ver tells RAR to keep old file versions in archive
when adding their new versions.
The corresponding WinRAR shell option is "Keep previous file
versions" in "Backup" part of archiving dialog.
21. "My Network Places" item is added to WinRAR address bar,
so you may browse the network in WinRAR file list.
The address bar also includes some other shell folders
like "My Computer" and "My Documents".
22. When you press "Up one level" toolbar button or Backspace
in the disk root, WinRAR will display the disks list in
the file panel.
23. It is possible to copy and paste archived and usual files
in WinRAR with Ctrl+C and Ctrl+V keys. For example, you may
select some files in archive, press Ctrl+C, open a folder
in Explorer and press Ctrl+V to unpack selected files to
that folder.
24. "Pause" button added to the operation progress window.
Archiving progress window is now displaying time left
instead of total estimated time.
25. CRC32 column is displayed inside of RAR, ZIP, ACE and ARJ archives.
CRC32 is the special control sum calculated basing on file data
and it may help to detect either two archived files are the same
without unpacking them. Same files always have the same CRC32 value.
26. When "Put each file in separate archive" option in the archiving
dialog is enabled, WinRAR uses a text entered in the archive name
field as the destination folder for created archives. Previous
versions ignored the archive name in the "separate archives" mode.
27. "Extract archives to subfolders" option in the extraction
dialog. It is available only when more than one archive
is unpacked. It will place unpacked contents of each archive
to separate subfolder, which name will be generated basing
on the archive name.
28. Switch -ad appends an archive name to destination path.
It may be useful when unpacking a few archives at once,
so files from each archive will go to separate folder.
29. "Extract each archive to separate folder" item is present
in Explorer context menu when unpacking a group of archives.
30. Two new options in WinRAR "Settings/General":
a) "Allow history in dialogs";
b) "Start in wizard mode".
31. Switch -af<type> allows to define a type of new archive
in WinRAR command line. <Type> can be 'rar' or 'zip'.
For example, 'winrar a -afzip arc' will create arc.zip archive.
This switch is supported only by WinRAR. Console RAR is not
able to create ZIP archives.
32. Switch -en disables adding "end of archive block".
By default, RAR 3.0 adds "end of archive" block to the end of
new or updated archive. It allows to skip external data like
digital signatures safely, but in some special cases it may be
useful to disable this feature. For example, if an archive
is transferred between two systems via a unreliable link and
at the same time a sender adds new files to it, it may be
important to be sure that the already received file part will
not be modified on the other end between transfer sessions.
33. Now RAR can update encrypted solid archives.
34. "Exit" button is added to the toolbar. It is disabled by default,
you may enable it manually with "Select buttons..." in WinRAR
settings.
35. "Select toolbar buttons" dialog allows to change the order
of toolbar buttons. Just select buttons to move and press
"Up" or "Down". Also you may drag buttons directly on
the toolbar while holding down the ALT key.
36. "Word wrap" option in "Settings/Viewer" selects the default
wrapping mode in new internal viewer windows.
37. Console RAR sends error messages to stderr instead of stdout.
38. New '+' modifier for -ag switch allows to place the date string
before a base archive name.
39. In the extraction dialog the entered folder is opened
in the folders tree automatically as you type, with a small
delay about 0.5 second. Also you may locate the currently
entered folder name in the tree pressing "Display" button.
40. It is possible to use wildcards in the path part of file mask
in -x switch and "Files to exclude" field of the archiving
dialog. For example, -x*\temp\*.
41. Switch -ilog accepts the optional log file name parameter.
For example, -ilogc:\log\backup.log.
42. Improved Chinese and Japanese (DBCS encoded) names processing
in ZIP archives (RAR format already supported such names since
WinRAR 2.80). But anyway, it is recommended to use RAR format
for such names, because it uses more portable Unicode encoding
instead of ZIP DBCS.
43. WinRAR uses new visual styles of Windows XP controls.
44. Improved processing of "Group Policies" settings. Earlier
it was possible to open a disk disabled in the policies
by pressing "Up" button inside of archive or entering
its path in the address bar.
45. Console rar.exe executed from NT service is continuing
to run after user's logoff.
46. If you attempt to close the command window and an archiving
or extraction operation is already performing for more than
one minute, WinRAR will ask for confirmation.
47. WinRAR recognizes and processes TAR @LongLink records.
GNU TAR uses them to store names longer than 100 characters
in TAR archives.
|
|
after consulting with Todd. Any volunteers for any of these packages?
|
|
consulting with Todd.
|
|
|
|
|
|
library path.
fixes build problem on zoularis.
|
|
(why this was not committed by `cvs commit distinfo patches/patch-ab'
with the previous makes no sense to me)
|
|
|
|
|
|
|
|
<schilling@fokus.gmd.de>.
Star is a full-featured tar command that can access local and remote
tar archives (files and tapes). It reads and writes POSIX compliant
tar archives as well as non-POSIX GNU tar archives.
Star is the first POSIX.1-2001 compliant tar implementation. It includes
a FIFO for speed, a pattern matcher, multi-volume support, the ability to
archive sparse files and ACLs and the ability to archive extended file flags.
It supports utomatic archive format detection, automatic byte order
recognition, automatic archivecompression/decompression. It includes the
only known platform independent "rmt" server program that implements all
Sun/GNU/Schily/BSD enhancements and allows any "rmt" client from any OS to
contact any OS as server.
|
|
exist on Darwin), use mktime() with a negative tm_isdst. Thanks to
christos for comments.
|
|
bmake: "../../archivers/bzip2/../../archivers/bzip2/buildlink.mk" line 30: warning: "0" returned non-zero status
|
|
|
|
|
|
viewer and uncompressor, submitted by Jeremy C. Reed in PR pkg/17009.
|
|
|
|
- Do not compute a pointer outside of an array.
The original code did this and if the executable is mapped at the
low address in virtual space, the "runsrc" value becomes ``negative''
address and caused crash.
Package maintainers should use a.out to detect this sort of botches. :D
- Fix usage of mktime(3).
- Fix usage of tolower(3).
Changes:
- Honor umask for file mode.
- Add a hack to handle self-extracting cabinet (*.exe).
|
|
- Add MacOS X to version_local()
- unix/configure: Init LFLAGS1 to "", MacOS X doesn't like -s
- rename errors array to ziperrors to avoid MacOS X library clash
|
|
|
|
|
|
A bug fix release, addressing various minor issues.
* Fix an infinite segfault loop in 1.0.1 when a directory is encountered
in -f (force) mode.
* Avoid double fclose() of output file on certain I/O error paths.
* Don't fail with internal error 1007 when fed a long stream (> 48MB)
of byte 251. Also print useful message suggesting that 1007s may be
caused by bad memory.
* Fix uninitialised variable silly bug in demo prog dlltest.c.
* Remove 512-MB limitation on recovered file size for bzip2recover
on selected platforms which support 64-bit ints.
* Copy file access times correctly.
* Dereference symlinks when copying file permissions in -f mode.
* Majorly simplify implementation of uInt64_qrm10.
* Check the input file still exists before deleting the output one,
when aborting in cleanUpAndFail().
* Wrapper scripts (with manpages): bzdiff, bzgrep, bzmore.
* Spelling changes and minor enhancements in bzip2.1.
* Avoid race condition between creating the output file and setting its
interim permissions safely, by using fopen_output_safely().
* do not print senseless report with -v when compressing an empty file.
* bzcat -f works on non-bzip2 files.
* do not try to escape shell meta-characters on unix (the shell takes
care of these).
* added --fast and --best aliases for -1 -9 for gzip compatibility.
|
|
|
|
|
|
This is yencode, an encoder/decoder package for the Usenet "yEnc"
format, licensed under the GNU General Public License.
* The encoder can output single part or multipart yencoded
archives of any size.
* Smart decoder can handle multiple files, including files
specified out of order or with nonsense file names.
* Easy to use Usenet posting software enables one-liner
posting of individual files or groups of files, including creation
of SFV/CRC checksum files if desired.
* Optional scan mode: automatically locate and decode
single or multipart yencoded archives in specified directories
or recursively.
* Fully compliant with all versions of the yEnc
specification (currently v1, v2, v3).
* Properly implements CRC values, including the pcrc32 on
each part of multipart archives, and a crc32 for the last part
of a multipart archive.
|
|
2002-03-14 UENO Katsuhiro <katsu@blue.sky.or.jp>
* version 0.5.1 released.
2002-03-14 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.c (gzfile_read_header): flush input buffer after reading header.
Thanks to HARUYAMA Seigo <haruyama@queen-ml.org>.
2002-03-14 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.rd.src: typo fixed.
2002-03-14 UENO Katsuhiro <katsu@blue.sky.or.jp>
* version 0.5.0 released.
2002-03-14 UENO Katsuhiro <katsu@blue.sky.or.jp>
* depend: added $(srcdir).
2002-03-14 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.c: use EXTERN instead of extern.
2002-03-12 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.c (gzwriter_defout_ensure, gzwriter_call_defout, CALL_DEFOUT):
added.
* zlib.c (rb_gzwriter_print): set myself to rb_defout and call
Kernel::print instead of copying codes from io.c.
(rb_gzwriter_puts): ditto.
2002-03-12 UENO Katsuhiro <katsu@blue.sky.or.jp>
* extconf.rb: added have_ruby_func().
* extconf.rb: added checks for rb_io_print, rb_io_printf, rb_io_puts
and rb_io_addstr.
* zlib.c (rb_gzwriter_addstr): use rb_io_addstr if it is extern.
(rb_gzwriter_print): ditto.
(rb_gzwriter_printf): ditto.
(rb_gzwriter_puts): ditto.
2002-02-11 UENO Katsuhiro <katsu@blue.sky.or.jp>
* makerd.rb: tiny bugfix.
* zlib.rd.src: reviced Zlib, ZStream, Deflate and Inflate.
2002-02-06 UENO Katsuhiro <katsu@blue.sky.or.jp>
* version 0.5.0-pre6 released.
2002-02-04 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.c (Init_zlib): remove method Zlib::Error#next_in.
* zlib.c (raise_zlib_error): Zlib::Error doesn't keep next_in any more.
The stream preserves next_in and next_out whether an error occurs.
* zlib.c (ZSTREAM_IS_FINALIZE): new macro.
2002-02-04 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.c (zstream_append_buffer2,zstream_append_input2): new macro.
2002-02-04 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.c (Init_zlib): new method Zlib::ZStream#stream_end? and
Zlib::ZStream#ended?.
* zlib.rd.src: add descriptions for above two methods.
2002-02-04 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.c (rb_deflate_deprecated): call super.
(rb_inflate_deprecated): ditto.
(rb_gzwriter_deprecated): ditto.
(rb_gzreader_deprecated): ditto.
* zlib.c (Init_zlib): warning message is printed when Deflate.deflate
and Inflate.inflate is used.
* zlib.c (zstream_end): keep both buffers whether the stream is
finished.
(rb_zstream_flush_next_in): works well regardless of the status of the
stream.
(rb_zstream_flush_next_out): ditto.
(rb_zstream_avail_out): ditto.
(rb_zstream_avail_in): ditto.
2002-02-04 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.c (zstream_run2): removed.
(do_deflate,do_inflate): derived from zstream_run2().
(rb_deflate_deflate): use do_deflate() instead of zstream_run2().
(rb_deflate_addstr): ditto.
(rb_inflate_inflate): use do_inflate() instead of zstream_run2().
(rb_inflate_addstr): ditto.
* zlib.c (zstream_run_loop,zstream_run): integrated into zstream_run().
* zlib.c (rb_deflate_s_deflate): Zlib::Deflate.deflate doesn't
accept nil.
(rb_inflate_s_inflate): Zlib::Inflate.inflate, neither.
2002-02-01 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.c (rb_deflate_flush): doesn't call zstream_run() if
flush == Z_NO_FLUSH.
(rb_gzwriter_flush): ditto.
* zlib.rd.src: appended description for Zlib::ZStream#finish.
2002-02-01 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.c (zstream_run_loop): zero-length check should be done
before calling zstream_run().
(gzfile_write): ditto.
(gzfile_read_more): ditto.
* zlib.c (rb_gzwriter_write): calls gzfile_write() even if len == 0.
* zlib.c (gzfile_read_more): ZSTREAM_IS_FINISHED() should be true
without calling zstream_run() when gzfile_read_raw() returns nil.
2002-02-01 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.c (zstream_sync,rb_infalte_sync): new method Inflate#sync.
* zlib.rd.src: added description for Inflate#sync.
* zlib.c (rb_deflate_flush): bugfix.
2002-02-01 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.c (rb_zlib_cannot_allocate,Init_zlib): Zlib::ZStream and
Zlib::GzipFile are abstract classes; they must not allocate their
instances.
2002-02-01 UENO Katsuhiro <katsu@blue.sky.or.jp>
* version 0.5.0-pre5 released.
2002-02-01 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.c (zstream_run_loop): doesn't start compressing/decompressing
loop if flush is set to Z_NO_FLUSH and the input is an empty string.
* zlib.c (zstream_run_loop): rewrote.
* zlib.c (zstream_append_input): doesn't make buffer if len == 0.
* zlib.c (zstream_run2): when flush == Z_FINISH, next_in should be
non-NULL even if avail_in == 0. Otherwise, Z_STREAM_ERROR may be
caused.
(rb_zstream_finish): ditto.
(rb_deflate_flush): ditto.
(rb_inflate_s_inflate): ditto.
(gzfile_writer_end): ditto.
(rb_gzwriter_flush): ditto.
* zlib.c (ZSTREAM_AVAIL_OUT_MIN): renamed ZSTREAM_AVAIL_OUT_MIN to
ZSTREAM_AVAIL_OUT_STEP_MIN.
* zlib.c (ZSTREAM_AVAIL_OUT_STEP): renamed ZSTREAM_AVAIL_OUT_STEP to
ZSTREAM_AVAIL_OUT_STEP_MAX.
(ZSTREAM_AVAIL_OUT_STEP_MIN): set to 2048.
(ZSTREAM_AVAIL_OUT_STEP_MAX): set to 16384.
* zlib.c (zstream_detach_input): added.
(rb_zstream_flush_next_in,Init_zlib): new method ZStream#flush_next_in.
* rzlib.rd.src: add descriptions for new methods.
2002-01-31 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.c (zstream_expand_buffer_into): added.
(rb_zstream_avail_out): new method ZStream#avail_out.
(rb_zstream_set_avail_out): new method ZStream#avail_out=.
(rb_zstream_avail_in): new method ZStream#avail_in.
(Init_zlib): define above new methods.
* zlib.c (zstream_init): next_in and avail_in should be initialized.
* zlib.c (zlib_mem_alloc,zlib_mem_free,zstream_init): use Ruby's
memory allocation for zalloc and zfree.
* zlib.c (Init_zlib): added constant Zlib::FINISH and Zlib::VERSION.
(zstream_init):
* zlib.rd.src: added description for Zlib::FINISH and Zlib::VERSION.
* extconf.rb: '<<' was missed.
* zlib.c (do_checksum): called checksum function twice when
no argument is given to Zlib.crc32 or Zlib.adler32.
* zlib.c (rb_zlib_str_value): StringValue() caused segv with
Ruby-1.6 if argument is nil.
* zlib.c (zstream_run_loop): if flush == Z_FINISH, the loop
must be continued until z->func->run returns Z_STREAM_END.
2002-01-29 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.c (gzfile_reader_get_unused): gz->z.input may be nil.
2002-01-29 UENO Katsuhiro <katsu@blue.sky.or.jp>
* version 0.5.0-pre4 released.
2002-01-29 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.c (Init_zlib): Zlib::Deflate.new and Zlib::Inflate.new are
integrated into Zlib::ZStream.new.
* zlib.rd.src: added description for Zlib::ZStream.new.
2002-01-28 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.c: adapt to ruby-1.7.
* zlib.c: redefine macros for backward compatibility.
* zlib.c (Init_zlib): added allocate methods.
(rb_deflate_s_allocate): ditto.
(rb_inflate_s_allocate): ditto.
(rb_gzwriter_s_allocate): ditto.
(rb_gzreader_s_allocate): ditto.
* zlib.c (rb_gzwriter_s_new,rb_gzreader_s_new): removed and
integreted into rb_gzfile_s_new.
* zlib.c (rb_zlib_version): return value of Zlib.version should be
tainted.
* extconf.rb: changed check for rb_str_buf_new.
* zlib.rd.src: added description for Zlib::GzipFile.new.
2002-01-09 UENO Katsuhiro <katsu@blue.sky.or.jp>
* version 0.5.0-pre3 released.
2002-01-08 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.c: added some macros for ruby-1.7 from Nobuyoshi Nakada's
patch ([ruby-ext:02048]). But they are disabled by #if 0.
* zlib.c: defined macro RB_ZLIB_NORETRURN.
* zlib.c, extconf.rb: NO_BLOCK_GIVEN_P -> !HAVE_BLOCK_GIVEN_P.
RUBY_NEW_NORETURN -> HAVE_NEW_NORETURN.
* zlib.rd.src: put untranslated parts into English.
* zlib.c (gzfile_ensure_close): close gzfile directly instead of
calling close method.
2002-01-07 WATANABE Hirofumi <eban@os.rim.or.jp>
* extconf.rb: cygwin is not a Win32.
2002-01-07 UENO Katsuhiro <katsu@blue.sky.or.jp>
* extconf.rb: add dir_config("zlib").
2002-01-06 UENO Katsuhiro <katsu@blue.sky.or.jp>
* version 0.5.0-pre2 released.
2002-01-06 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.c (gzfile_writer_end): protect gzfile_write_raw() at finalize.
* zlib.c (gzfile_ensure_close): close method must be sent to obj
itself, not gz->io.
* extconf.rb: added msg_check.
* extconf.rb: define "NO_BLOCK_GIVEN_P" instead of "rb_block_given_p"
if block_given? doesn't exist.
* zlib.c: stop using RUBY_VERSION_CODE.
2002-01-06 Nobuyoshi Nakada <nobu.nakada@nifty.ne.jp>
* extconf.rb: added checks for Ruby-1.7.
2002-01-06 Tanaka Akira <akr@m17n.org>
* zlib.rd.src: modified.
2002-01-06 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.rd.src: modified.
2002-01-06 UENO Katsuhiro <katsu@blue.sky.or.jp>
* version 0.5.0-pre1 released.
2002-01-06 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.rd.src: rewrote the document by RD.
* makerd.rb: added script to generate language-separated RD.
* depend: added dependencies for documents.
2002-01-05 UENO Katsuhiro <katsu@blue.sky.or.jp>
* extconf.rb: check CONFIG['target_os'], not CONFIG['host_os'].
* zlib.c: added member `input' to struct zstream.
(zstream_append_input): added for expandable input buffer.
(zstream_discard_input): ditto.
(zstream_reset_input): ditto.
(zstream_passthrough_input): ditto.
(zstream_run,zstream_run_loop): divided the inflate/deflate loop from
zstream_run to zstream_run_loop and added consideration for NeedDict.
* zlib.c (raize_zlib_error): added the third parameter `next_in'.
(rb_zerror_next_in): added Zlib::ZError#next_in.
* zlib.c: removed member `unused' from struct gzfile.
(gzfile_reader_get_unused): GzipReader#unused returns nil if
the GzipReader object is closed.
* zlib.c (Init_zlib): GzipReader and GzipWriter class are deprecated;
use Zlib::GzipReader and Zlib::GzipWriter.
(Init_zlib): Zlib::GzipReader::OS_* -> Zlib::OS_*
(Init_Zlib): Zlib::GzipReader::{NoFooter,CRCError,LengthError} ->
Zlib::GzipFile::*
* zlib.c: add ZSTREAM_FLAG_FINALIZE to prevent segv in finalizer.
* zlib.c (gzfile_writer_end): warn Zlib::GzipWriter object must be
closed explicitly.
* zlib.c (rb_zstream_flush_out): rename to rb_zstream_flush_next_out.
(Init_zlib): rename ZStream#flush_out to ZStream#flush_next_out.
* zlib.c (rb_zerror_initialize): added Zlib::Error#initialize.
2002-01-02 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.c: rename `flag' in struct zstream to `flags'.
* zlib.c: reformat and rearrenge the code.
* zlib.c: refactor functions and macros for zstream and gzfile.
Since these are very core funcs, the whole of zlib.c is
almostly rewrote. No changes must be found in behaviors
of any classes and modules, I hope.
* zlib.c: use OBJ_INFECT instead of if(OBJ_TAINTED)OBJ_TAINT.
* zlib.c (rb_deflate_clone): call CLONESETUP.
* zlib.c: removed sanity checks for arguments for deflateInit2
and inflateInit2.
(value_to_compression_level): removed.
(value_to_window_bits): ditto.
(value_to_memlevel): ditto.
(value_to_strategy): ditto.
(value_to_flush): ditto.
* zlib.c (rb_deflate_s_new,rb_deflate_initialize): only do allocation
in Deflate::new and initializing in Deflate#initialize.
(rb_inflate_s_new,rb_inflate_initialize): ditto.
* zlib.c (Init_zlib): Deflate and Inflate class are deprecated;
use Zlib::Deflate and Zlib::Inflate.
(rb_deflate_deprecated,rb_inflate_deprecated): added for
warning this is a deprecated class.
* zlib.c (Init_zlib): constants defined under Deflate and Inflate are
moved under Zlib.
* zlib.c (rb_gzwriter_puts): adapt to ruby-1.7.
* zlib.c (Init_zlib): rename Zlib::Gzip to Zlib::GzipFile.
2002-01-01 UENO Katsuhiro <katsu@blue.sky.or.jp>
* zlib.c: make all functions static.
* zlib.c: update copyright line.
* THANKS: added.
2001-09-15 Ueno Katsuhiro <katsu@blue.sky.or.jp>
* zlib.c (zstream_shift_buffer): bug fixed about buffer overflow.
Thanks to Ned Konz <ned@bike-nomad.com>.
|
|
|
|
without complaints.
Deinstall sample config file if unchanged.
|
|
|
|
|
|
* Use curses. Darwin doesn't have termcap.
* Add __APPLE__ to system.h to define necessary macros.
* Replace __{Free,Open,Net}BSD__ with __UNIX__ in language/language.c.
It worked on *BSD, but not correct logically.
XXX -no-cpp-precomp issue isn't fixed yet. I think we should fix it in
XXX generic way.
|
|
|
|
|
|
that this is built from the php-4.1.2 sources.
|
|
that this is built from the php-4.1.2 sources.
|
|
|
