| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Several changes are involved since they are all interrelated. These
changes affect about 1000 files.
The first major change is rewriting bsd.builtin.mk as well as all of
the builtin.mk files to follow the new example in bsd.builtin.mk.
The loop to include all of the builtin.mk files needed by the package
is moved from bsd.builtin.mk and into bsd.buildlink3.mk. bsd.builtin.mk
is now included by each of the individual builtin.mk files and provides
some common logic for all of the builtin.mk files. Currently, this
includes the computation for whether the native or pkgsrc version of
the package is preferred. This causes USE_BUILTIN.* to be correctly
set when one builtin.mk file includes another.
The second major change is teach the builtin.mk files to consider
files under ${LOCALBASE} to be from pkgsrc-controlled packages. Most
of the builtin.mk files test for the presence of built-in software by
checking for the existence of certain files, e.g. <pthread.h>, and we
now assume that if that file is under ${LOCALBASE}, then it must be
from pkgsrc. This modification is a nod toward LOCALBASE=/usr. The
exceptions to this new check are the X11 distribution packages, which
are handled specially as noted below.
The third major change is providing builtin.mk and version.mk files
for each of the X11 distribution packages in pkgsrc. The builtin.mk
file can detect whether the native X11 distribution is the same as
the one provided by pkgsrc, and the version.mk file computes the
version of the X11 distribution package, whether it's built-in or not.
The fourth major change is that the buildlink3.mk files for X11 packages
that install parts which are part of X11 distribution packages, e.g.
Xpm, Xcursor, etc., now use imake to query the X11 distribution for
whether the software is already provided by the X11 distribution.
This is more accurate than grepping for a symbol name in the imake
config files. Using imake required sprinkling various builtin-imake.mk
helper files into pkgsrc directories. These files are used as input
to imake since imake can't use stdin for that purpose.
The fifth major change is in how packages note that they use X11.
Instead of setting USE_X11, package Makefiles should now include
x11.buildlink3.mk instead. This causes the X11 package buildlink3
and builtin logic to be executed at the correct place for buildlink3.mk
and builtin.mk files that previously set USE_X11, and fixes packages
that relied on buildlink3.mk files to implicitly note that X11 is
needed. Package buildlink3.mk should also include x11.buildlink3.mk
when linking against the package libraries requires also linking
against the X11 libraries. Where it was obvious, redundant inclusions
of x11.buildlink3.mk have been removed.
|
|
USE_GNU_TOOLS -> USE_TOOLS
awk -> gawk
m4 -> gm4
make -> gmake
sed -> gsed
yacc -> bison
|
|
|
|
|
|
updates the vbic model, fixes some memory leaks, fixes a bug related
to `m' (multiplicity factor), various other bug fixes.
|
|
there have been many many bug fixes since the ng-spice-14. Notable
updates include bug fixes in the bjt pole/zero code, updates to the
bsim1,2,3 models, updated hsim model, updates the jfet model and
much code cleanup.
|
|
in the process. (More information on tech-pkg.)
Bump PKGREVISION and BUILDLINK_DEPENDS of all packages using libtool and
installing .la files.
Bump PKGREVISION (only) of all packages depending directly on the above
via a buildlink3 include.
|
|
|
|
|
|
curses.buildlink2.mk. This was wrong because we _really_ do want to
express that we want _n_curses when we include the buildlink2.mk file.
We should have a better way to say that the NetBSD curses doesn't
quite work well enough. In fact, it's far better to depend on ncurses
by default, and exceptionally note when it's okay to use NetBSD curses
for specific packages. We will look into this again in the future.
|
|
support for base system curses/ncurses as well as ncurses itself.
suggested by wiz.
|
|
|
|
|
|
|
|
Patch ngspice.info for INFO-DIR-{SECTION,ENTRY} addition.
|
|
|
|
|
|
Summary of changes:
- removal of USE_GTEXINFO
- addition of mk/texinfo.mk
- inclusion of this file in package Makefiles requiring it
- `install-info' substituted by `${INSTALL_INFO}' in PLISTs
- tuning of mk/bsd.pkg.mk:
removal of USE_GTEXINFO
INSTALL_INFO added to PLIST_SUBST
`${INSTALL_INFO}' replace `install-info' in target rules
print-PLIST target now generate `${INSTALL_INFO}' instead of `install-info'
- a couple of new patch files added for a handful of packages
- setting of the TEXINFO_OVERRIDE "switch" in packages Makefiles requiring it
- devel/cssc marked requiring texinfo 4.0
- a couple of packages Makefiles were tuned with respect of INFO_FILES and
makeinfo command usage
See -newly added by this commit- section 10.24 of Packages.txt for
further information.
|
|
A pkgsrc specific change is that it no longer conflicts with the
cad/spice package allowing both to be installed.
From the NEWS file:
This is a major release in terms of bug-fixes. Some enhancements
have been included: BSIM4 model and support for EKV model. The
source code for the latter must be obtained from EKV web site
(see DEVICE for more info). To enable EKV support you have
to obtain the code first and then use the configure switch
"--enable-ekv".
|
|
redefines about which buildlink.mk files would care is BUILDLINK_X11_DIR,
which points to the location of the X11R6 hierarchy used during building.
If x11.buildlink.mk isn't included, then BUILDLINK_X11_DIR defaults to
${X11BASE} (set in bsd.pkg.mk), so its value is always safe to use. Remove
the ifdefs surrounding the use of BUILDLINK_X11_DIR in tk/buildlink.mk and
revert changes to move x11.buildlink.mk before the other buildlink.mk files.
|
|
use X11_BUILDLINK_MK as a test value. Generally just reordering the
inclusions so that x11.buildlink.mk comes before the other buildlink.mk
files will make everthing work.
|
|
foo-* to foo-[0-9]*. This is to cause the dependencies to match only the
packages whose base package name is "foo", and not those named "foo-bar".
A concrete example is p5-Net-* matching p5-Net-DNS as well as p5-Net. Also
change dependency examples in Packages.txt to reflect this.
|
|
to ${X11BASE} in the header and library search paths into references to
${LOCALBASE}/share/x11-links. These packages should now be strongly-
buildlinked regardless of whether xpkgwedge is installed.
Changes well-tested on NetBSD-1.5X/i386 with and without xpkgwedge and
lightly-tested on NetBSD-1.5.1/alpha without xpkgwedge.
|
|
|
|
USE_X11 instead of explicitly adding ${X11BASE}/lib to the LDFLAGS.
|
|
adapt by moving CPPFLAGS settings to top-level, and removing explicit
inclusion of CPPFLAGS into MAKE_ENV and CONFIGURE_ENV.
|
|
|
|
NG-SPICE is the program being developed as the replacement for Berkeley
SPICE. Using the Berkeley code as a starting point, the NG-SPICE team
is working on improving the build system, adding to the models, and
improving the analysis capability.
SPICE is a general-purpose circuit simulation program for nonlinear dc,
nonlinear transient, and linear ac analyses. Circuits may contain resistors,
capacitors, inductors, mutual inductors, independent voltage and current
sources, four types of dependent sources, lossless and lossy transmission
lines (two separate implementations), switches, uniform distributed RC
lines, and the five most common semiconductor devices: diodes, BJTs, JFETs,
MESFETs, and MOSFETs.
|
