summaryrefslogtreecommitdiff
path: root/comms/mgetty+sendfax/distinfo
AgeCommit message (Collapse)AuthorFilesLines
2007-08-30Fix path to and depend on Perl. Bump revision.joerg1-2/+2
2007-08-08Don't use malloc.h.joerg1-1/+3
2007-03-01pkglint cleanup:wiz1-1/+2
Replace configure-script with a patch that does the same. Use SUBST framework instead of mv+sed.
2006-03-20* Remove unnecessary INSTALL and DEINSTALL scripts and replace with anjlam1-5/+4
appropriate OWN_DIRS_PERMS definition. * Simplify the patches by overriding the value of CONFDIR at build time and at installation time. * Honor PKGINFODIR and PKGMANDIR. Bump PKGREVISION to 4 due to INSTALL script changes.
2006-01-05Add DragonFly support.joerg1-2/+3
2005-09-08Catch some NetBSD statvfs() checks phrased alternatively as > 200030000abs1-2/+2
rather than >= 200040000 and one enterprisingly hidden as > 200050000
2005-06-12- Add missing definition of CONF_EXAMPLES_DIR.hira1-2/+2
- Add missing entry to PLIST. Bump PKGREVISION. This closes PR pkg/30073.
2005-03-07Regen some patches to get correct line number offsets; some patch(1) care.wiz1-7/+7
2005-02-23Regen after RCSId add.jwise1-2/+2
2005-02-23While here, fix the group for voice mail messages in the default voice.conf.jwise1-1/+2
2005-02-23Update checksums for patch-a[bcd] after RCS got added.wiz1-4/+4
2005-02-23Update to mgetty+sendfax-1.1.31. While here, also install vgettyjwise1-9/+7
config file, which we were skipping. Changes from mgetty+sendfax-1.1.30: Sat Jul 24 16:54:52 MEST 2004 Gert Doering <gert@greenie.muc.de> * release 1.1.31 * doc/mgetty.texi-in: add section on isdn4linux and CAPI Sat Jul 17 17:21:38 MEST 2004 Gert Doering <gert@greenie.muc.de> * doc/sff2g3.1in: add man page for sff2g3 Sat Jul 17 12:18:28 MEST 2004 Andreas Barth <aba@not.so.argh.org> * cnd.c: add "+CLIP:" string for caller ID * voice/libvoice/detect.c: ATI codes for Zoom and Multitech modems * voice/libvoice/V253modem.c: more flexible sample/s. handling (old stuff was fixed at 7200 hz) * voice/pvftools/pvftormd.c: accept 7200, 8000, 11025 Hz for "Lucent" * fax/faxspool.in: use per-user .faxheader/.make.coverpg files instead of global defaults (if per-user files exists) Fri Jul 16 19:03:48 MEST 2004 Gert Doering <gert@greenie.muc.de> * g3/Makefile: add "make test" test suite (for G3 tools) * g3/sff2g3.c: NEW: converter from CAPI SFF fax format to raw G3 * Makefile: pack g3/sff2g3.c Thu Feb 5 18:40:29 MET 2004 Gert Doering <gert@greenie.muc.de> * fax/faxspool: rework umask saving/restoring (use subshell trick) Sat Jan 10 00:01:25 MET 2004 Gert Doering <gert@greenie.muc.de> * faxlib.c: add 1503 ID code (ZyXEL U-90E) Tue Dec 16 12:46:52 MET 2003 Andreas Barth <aba+nospam@not.so.argh.org> * Makefile: remove -DAUTO_PPP * policy.h: include FIDO and AUTO_PPP here Fri Dec 5 22:46:47 MET 2003 Ken Findlay <kjf@taylorbritt.com> * login.c: empty lines should never match, not even empty user names Mon Nov 17 20:08:59 MET 2003 Gert Doering * mgetty.c: log warning if parent PID is not "1" (init) * mgetty.cfg.in: add clarification about "direct yes" to sample cfg Fri Nov 7 21:47:27 MET 2003 Andreas Barth <aba+nospam@not.so.argh.org> * fax/faxspool.in: add per-user faxheader and coverpg files * doc/faxspool.1in, mgetty.texi: document new feature Thu Oct 9 12:44:47 MEST 2003 Gert Doering * fax/faxspool.in: reject empty (0 bytes) input files Sun Oct 5 13:59:51 MEST 2003 Gert Doering * do_chat.c: make clean_line() logging show the timeout value Mon Sep 29 23:36:34 MEST 2003 Andreas Barth * contrib/g3tolj.c, g3toxwd.c: clean up protoypes and return types * various .c files: integrate Debian cleanup fixes (usually adding <string.h> and/or <stdlib.h> where missing) Wed Aug 20 12:39:53 MEST 2003 Gert Doering (gert@greenie.muc.de) * fax/faxrunqd.in: change signal handling - use HUP for graceful exit, and dump statistics to logfile upon receipt of USR2 Sat Jun 28 22:14:35 MEST 2003 Gert Doering (gert@greenie.muc.de) * fax/faxq-helper.c: honour user umask when spooling G3 files (user decides whether group/other can read faxes) * fax/faxspoool.in: reset umask after creating tmpdir (with umask 077) * fax/faxq-helper.c: file name validation was overly strict - accept anything that's printable, not a space, '/' or '\' Thu Jun 12 16:56:44 MEST 2003 Gert Doering (gert@greenie.muc.de) * faxlib.c: Multitech and USR return class 2.0/2.1 +FPS:<x>,<lc> values in decimal, not hex -> change +FPS: parser to do decimal for those modems (via modem_quirks |= MQ_FPS_NOT_HEX) * fax_lib.h: add MQ_FPS_NOT_HEX modem quirk bit * faxrec.c, faxrecp.c: understand VR=8 for "normal mode" (200x100 dpi) Mon Apr 28 19:41:14 MEST 2003 Gert Doering (gert@greenie.muc.de) * logname: make "buffer overrun" error message more precise Wed Apr 23 10:49:25 MEST 2003 John R. Jackson <jrj@purdue.edu> * voice/libutil/access.c: more verbose error reporting Wed Apr 9 23:05:23 MEST 2003 Gert Doering (gert@greenie.muc.de) * fax/faxspool.in: fix spooling without header line (-h -) Sun Apr 6 16:09:14 MEST 2003 Andreas Barth <aba@not.so.argh.org> * mgetty.8in, mgetty.texi-in: document escape sequences for /etc/issue and login prompt. Wed Mar 5 21:37:38 MET 2003 Gert Doering (gert@greenie.muc.de) * Makefile: abort "make install" before installing faxspool if fax user does not exist * Makefile: unconditionally chown $FAX_SPOOL_OUT to fax user Tue Feb 4 17:46:45 MET 2003 Gert Doering (gert@greenie.muc.de) * fax/faxq-helper.c: uid=0 overrides access permission checks * fax/faxrm.in: bugfix: get faxq-helper path from sedscript Tue Jan 21 14:27:39 MET 2003 Gert Doering (gert@greenie.muc.de) * fax/faxspool.in: abort with a proper error message on input file names containing white space or quote characters Tue Jan 14 14:30:42 MET 2003 Gert Doering (gert@greenie.muc.de) * fax/faxrunqd.in: include "success" counter in per_phone_statistics * ugly.h: #define USE_VARARGS for non-Ansi C compilers * logfile.c: change #include<> sequence to catch USE_VARARGS def. Wed Jan 8 23:03:26 MET 2003 Gert Doering (gert@greenie.muc.de) * fax/faxrunqd.in: if a fax job fails, reschedule on different modem (if possible) * voice/libvoice/V253modem.c: fix ELSA_RMD_NAME (used for V.253 modem <-> other modem RMD equivalency checks)
2005-02-23Add RMD160 digests in addition to SHA1 ones.agc1-1/+2
2004-04-26Make this build under NetBSD 2.0D and above with statvfs(2).tron1-1/+2
2003-12-20Let "faxq" and "faxrm" find the "faxrunq-helper" in ${PREFIX} (which isfredb1-1/+3
probably not "/usr/local").
2003-09-25Make this compile on NetBSD-current.fredb1-1/+2
2003-09-20Update to 1.1.30, submitted by Stephane Fortier in PR pkg/22867.fredb1-6/+6
"ChangeLog" since 1.1.28 w/dates and blank lines elided: * release 1.1.30 * voice/vgetty/answer.c, voice/include/default.c: integrate Paul Fox' pre_message and beep_sound patches * voice/libvoice/detect.c: recognize MultiTech MT3334ZDXV * faxhng.c: add some result codes for the i4l DIVA driver * voice/libvoice/IS_101.c: fix DTMF events for the unshielded case * voice/vgetty/answer.c: accept arbitrary ring types, not only 0..6 * ring.c: map DRON/DROF return codes to binary word, use result as distinctive RING number * frontends/www/README: add user authentication example * voice/libvoice/V253modem.c: repair messed-up 16 bit PCM patch * release 1.1.29 * voice/libvoice/detect.c: insert delay before sending ATE0 to modem (timing issue - modem might not have sent the full \r\n sequence from the last "OK" yet when the new AT comes in) * doc/*.[158]in: bring man pages up to date * tools/ltest.c, tools/mid.c: adapt to new lprintf() prototype * mgetty.h, logfile.c: adapt to use <stdarg.h> and "..." function declaration (unless USE_VARARGS is set, which is needed for NeXT platforms). Karsten Keil <kkeil@suse.de>. * Makefile: relax permissions on sendfax and faxrunq.config install - must be readable/executeable by user "fax" now * doc/faxrunqd.8in: document "-u", minor updates * fax/faxrunqd.in, fax/faxspool.in, fax/faxrunq.in: revert Aug 6, 200 change - put faxqueue_done back into $FAX_SPOOL_OUT/ (faxrunq/faxrunqd have no access rights to $VARRUNDIR/ anymore, and $FAX_SPOOL_OUT is no longer world writeable anyway) * fax/faxq.in: change from .last_run to faxqueue_done * fax/faxrunqd.in: add "-u <user>" switch (set uid to <user>) * fax/faxq-helper.c: finalize new fax queue handling using helper process (suid fax) and a fax queue that is no longer world-readable (open issue since 1994 :) ) * faxrecp.c: implement experimental teergrubing mode (signal "page bad, please retransmit" at the end of each page - or just hang up hard on caller). Activared with "modem-quirks 0x100" or "0x200", respectively. * voice/libvoice/V253Modem.c: add 16 bit linear PCM support (patch coming from Peter Bruley) * voice/pvftools/pvftormd.c, rmdtopvf.c: add 16 bit linear PCM * rework faxq-helper concept (suid root -> suid fax) * fax/faxq.in: adap "-r" to use faxq-helper * fax/faxspool.in: adapt to use faxq-helper * fax/faxrm.in: adapt to use faxq-helper * Makefile: create FAX_SPOOL_OUT with mode 755 and owner FAX_OUT_USER * Makefile: add FAX_OUT_USER definition, pass lots of variables to fax/Makefile (for faxq-helper) * README.1st: add instructions about FAX_OUT_USER setup * doc/mgetty.texi-in add instructions about FAX_OUT_USER setup * fax/faxrunqd.in: fix symlink / file overwrite race in JOB files. Pointed out by Jablonovsky Alexander <sasha@cit-saratov.ru> * doc/faxrunq.8in: point out insecurity in symlink handling * mgetty.h: Intel 64bit platforms (__x86_64__) needs PTR_IS_LONG * voice/libvoice/IS_101.c: implement DLE shielding for long DTMF tones for V.253 (initially by Lee Howard <faxguy@howardsilvan.com>) * mgetty.c: throw out DIST_RING #define - not used anymore * ring.c: make sure action strings (CONNECT) are only recognized at the beginning if a line, not in the middle (Paul Fox, pgf@foxharp.boston.ma.us, CALLER NAME = CONNECTICUT). * cnd.c: replace non-printable characters and quotes in caller ID or caller name strings with ' ' - safeguard for passing them to shell later on. * doc/mgetty.texi-in: add stuff about recent multitech modems, superfine+v.34 fax, and rework chapter about common problems * faxlib.c: fix ugliness with USR modems reporting remote fax ID as " 12345" -> skip leading '"' and all whitespace * cnd.c: possible buffer overrun via CallName (found by "A. Guru" <a.guru@sympatico.ca>) * fax/faxrunqd: fix priority vs. write combining bug * login.c: check for close-on-exec bit on FD 0 (FreeBSD 4.1 bug) * login.c: export Caller Name as environment variable $CALLER_NAME * login.c: make message about bad permissions even more clear
2003-02-27Use the same ut_id as "login" does, so we can properly close out the wtmpxfredb1-2/+2
entry that "login" creates.
2003-02-27- - Use standard ${PKG_SYSCONFDIR} handling; bump ${PKGREVISION}.fredb1-4/+3
- - Reorganize Makefile #defines into global toggles, global settings, local settings. - - Reorganize and consolidate override targets.
2003-02-26Add support for /var/run/utmpx on NetBSD 1.6B or newer, includingfredb1-1/+4
building on a suggestion by Gert Doering, filling ut_pid with the pid of the uucp-style lock holder. This should fix PR pkg/12261, although you will need today's "w" to see any results. Bump PKGREVSION.
2002-07-27Revert last change. Gert Doering says that's not a bug - it's a feature.fredb1-2/+1
I'll look at fixing "w", instead.
2002-07-24Mgetty has no business making a utmp entry while it's only waiting forfredb1-1/+2
a lock. Closes PR pkg/12261.
2002-03-09Update mgetty+sendfax to 1.1.28. From the ChangeLog file:fredb1-6/+5
* release 1.1.28 * faxrec.c: replace "0"'s by "STDIN" (readability) * doc/mgetty.texi-in: some updates * doc/faxrunq.1in, doc/faxrunqd.8in: document calling convention changes (as below) * fax/faxrunq(d).in: pass (last) sendfax return code as 2nd argument to success/failure program * policy.h, utmp.c: incorporate some NetBSD changes * various: change time() prototype to "time_t time(time_t *tloc)" * mgetty.h, syslibs.h, logfile.c: some #ifdef fiddling for Darwin * doc/faxrunq.1in, doc/faxrunqd.8in: document more stuff * fax/faxrunq, fax/faxrunqd: don't run queue if a file $FAX_SPOOL_OUT/stop exists. * login.c: MAX_LOGIN_ARGS handling reworked (claimed N, but allowed only N-1), plus warning message improved. <Juergen.Kosel@gmx.de> * release 1.1.27 * doc/mgetty.texi-in: work on isdn4linux notes * cnd.c (cndtable): add swedish ZyXEL caller ID format (T. Lundgren) * cnd.c (cndtable): add "CALLED NUMBER:" (Jan Oberlaender/i4l) * various: adaptions to OpenBSD (similar to NetBSD) * mgetty.h: patch to adapt to Linux/S390 (PTR_IS_LONG) * frontends/www/: integrate new version from Neko
2002-03-06Rename the fax overview manpage from "fax" to "sendfax", to avoid anyfredb1-2/+3
conflict with the "efax" package. "efax" already has an "efax.1", the actual man page, but "mgetty"'s "sendfax" manpage is "sendfax.8", so "sendfax.1" is available. Closes PR pkg 14254.
2002-02-18Introduce new framework for handling info files generation and installation.seb1-2/+2
Summary of changes: - removal of USE_GTEXINFO - addition of mk/texinfo.mk - inclusion of this file in package Makefiles requiring it - `install-info' substituted by `${INSTALL_INFO}' in PLISTs - tuning of mk/bsd.pkg.mk: removal of USE_GTEXINFO INSTALL_INFO added to PLIST_SUBST `${INSTALL_INFO}' replace `install-info' in target rules print-PLIST target now generate `${INSTALL_INFO}' instead of `install-info' - a couple of new patch files added for a handful of packages - setting of the TEXINFO_OVERRIDE "switch" in packages Makefiles requiring it - devel/cssc marked requiring texinfo 4.0 - a couple of packages Makefiles were tuned with respect of INFO_FILES and makeinfo command usage See -newly added by this commit- section 10.24 of Packages.txt for further information.
2001-06-21Fix mgetty package to not delete its config files on pkg_delete (nextfredb1-4/+5
time! -- save them by hand if you need them for this upgrade), add a package hook to change ${CONFDIR}, where the binaries look for their configuration files, and update to 1.1.26. Many bug fixes and improved compatibility with various modems. The following were culled from the extensive ChangeLog file's for being conceivably of general interest. * login.c: export current tty as $DEVICE to shell * dialin.config: added V253 codes for OUT_OF_AREA and PRIVATE. * getdisk.c: fix overflow on file systems with > 2G (2^31 bytes) free * getdisk.c: default MINFREESPACE from policy.h was interpreted as *bytes*, not as *kbytes*. Which kind of defeats the purpose of checking for "enough disk space". Fixed, work with kbytes now. * faxrecp.c: check access rights first, space second (this will give clearer log messages for non-existing directories) * faxrecp.c: change fax page writing to open( O_EXCL|O_CREAT ) * locks.c: use mkstemp() to create tmp file, if available, open( O_EXCL|O_CREAT ) otherwise. and for vgetty... * Fixed buffer overflow in vm and vgetty, submitted by Georg Kirschbaum, <Georg.Kirschbaum@gimmel.franken.de>. Impact would not have been very big since only DTMFs are under control of the user.
2001-04-20Move to sha1 digests, and add distfile sizes.agc1-2/+3
2001-04-17+ move the distfile digest/checksum value from files/md5 to distinfoagc1-0/+11
+ move the patch digest/checksum values from files/patch-sum to distinfo
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-06 05:27:15 +0000