summaryrefslogtreecommitdiff
path: root/comms
AgeCommit message (Collapse)AuthorFilesLines
2011-06-10recursive bump from textproc/icu shlib major bump.obache10-20/+20
2011-06-09Upgrade to 1.8.4.2. This fixes several security issues including:jnemeth7-201/+95
AST-2011-002, AST-2011-003, AST-2011-004, AST-2011-005, AST-2011-006, and AST-2011-007. pkgsrc changes: - add patch for autosupport script; == -> = - patch configure to not unconditionally set PBX_LAUNCHD=1 - this allows res_timing_kqueue.so to build This last change brings a timing source to NetBSD which allows IAX trunking and allows the bridging modules to work, a rather major piece that was missing. Note that I haven't extensively tested it. But, have at it... =========================================================================== 1.8.4.2: The Asterisk Development Team has announced the release of Asterisk version 1.8.4.2, which is a security release for Asterisk 1.8. The release of Asterisk 1.8.4.2 resolves an issue with SIP URI parsing which can lead to a remotely exploitable crash: Remote Crash Vulnerability in SIP channel driver (AST-2011-007) The issue and resolution is described in the AST-2011-007 security advisory. For more information about the details of this vulnerability, please read the security advisory AST-2011-007, which was released at the same time as this announcement. For a full list of changes in the current release, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.8.4.2 Security advisory AST-2011-007 is available at: http://downloads.asterisk.org/pub/security/AST-2011-007.pdf =========================================================================== 1.8.4.1: The Asterisk Development Team has announced the release of Asterisk 1.8.4.1. The release of Asterisk 1.8.4.1 resolves several issues reported by the community. Without your help this release would not have been possible. Thank you! Below is a list of issues resolved in this release: * Fix our compliance with RFC 3261 section 18.2.2. (aka Cisco phone fix) * Resolve a change in IPv6 header parsing due to the Cisco phone fix issue. This issue was found and reported by the Asterisk test suite. * Resolve potential crash when using SIP TLS support. * Improve reliability when using SIP TLS. For a full list of changes in this release candidate, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.4.1 =========================================================================== 1.8.4: The Asterisk Development Team has announced the release of Asterisk 1.8.4. The release of Asterisk 1.8.4 resolves several issues reported by the community. Without your help this release would not have been possible. Thank you! Below is a sample of the issues resolved in this release: * Use SSLv23_client_method instead of old SSLv2 only. * Resolve crash in ast_mutex_init() * Resolution of several DTMF based attended transfer issues. NOTE: Be sure to read the ChangeLog for more information about these changes. * Resolve deadlocks related to device states in chan_sip * Resolve an issue with the Asterisk manager interface leaking memory when disabled. * Support greetingsfolder as documented in voicemail.conf.sample. * Fix channel redirect out of MeetMe() and other issues with channel softhangup * Fix voicemail sequencing for file based storage. * Set hangup cause in local_hangup so the proper return code of 486 instead of 503 when using Local channels when the far sides returns a busy. Also affects CCSS in Asterisk 1.8+. * Fix issues with verbose messages not being output to the console. * Fix Deadlock with attended transfer of SIP call Includes changes per AST-2011-005 and AST-2011-006 For a full list of changes in this release candidate, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.4 Information about the security releases are available at: http://downloads.asterisk.org/pub/security/AST-2011-005.pdf http://downloads.asterisk.org/pub/security/AST-2011-006.pdf =========================================================================== 1.8.3.3: The Asterisk Development Team has announced security releases for Asterisk branches 1.4, 1.6.1, 1.6.2, and 1.8. The available security releases are released as versions 1.4.40.1, 1.6.1.25, 1.6.2.17.3, and 1.8.3.3. The releases of Asterisk 1.4.40.1, 1.6.1.25, 1.6.2.17.3, and 1.8.3.3 resolve two issues: * File Descriptor Resource Exhaustion (AST-2011-005) * Asterisk Manager User Shell Access (AST-2011-006) The issues and resolutions are described in the AST-2011-005 and AST-2011-006 security advisories. For more information about the details of these vulnerabilities, please read the security advisories AST-2011-005 and AST-2011-006, which were released at the same time as this announcement. For a full list of changes in the current releases, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.8.3.3 Security advisory AST-2011-005 and AST-2011-006 are available at: http://downloads.asterisk.org/pub/security/AST-2011-005.pdf http://downloads.asterisk.org/pub/security/AST-2011-006.pdf =========================================================================== 1.8.3.2: he Asterisk Development Team has announced security releases for Asterisk branches 1.6.1, 1.6.2, and 1.8. The available security releases are released as versions 1.6.1.24, 1.6.2.17.2, and 1.8.3.2. ** This is a re-release of Asterisk 1.6.1.23, 1.6.2.17.1 and 1.8.3.1 which contained a bug which caused duplicate manager entries (issue #18987). The releases of Asterisk 1.6.1.24, 1.6.2.17.2, and 1.8.3.2 resolve two issues: * Resource exhaustion in Asterisk Manager Interface (AST-2011-003) * Remote crash vulnerability in TCP/TLS server (AST-2011-004) The issues and resolutions are described in the AST-2011-003 and AST-2011-004 security advisories. For more information about the details of these vulnerabilities, please read the security advisories AST-2011-003 and AST-2011-004, which were released at the same time as this announcement. For a full list of changes in the current releases, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.8.3.2 Security advisory AST-2011-003 and AST-2011-004 are available at: http://downloads.asterisk.org/pub/security/AST-2011-003.pdf http://downloads.asterisk.org/pub/security/AST-2011-004.pdf =========================================================================== 1.8.3.1: The Asterisk Development Team has announced security releases for Asterisk branches 1.6.1, 1.6.2, and 1.8. The available security releases are released as versions 1.6.1.23, 1.6.2.17.1, and 1.8.3.1. The releases of Asterisk 1.6.1.23, 1.6.2.17.1, and 1.8.3.1 resolve two issues: * Resource exhaustion in Asterisk Manager Interface (AST-2011-003) * Remote crash vulnerability in TCP/TLS server (AST-2011-004) The issues and resolutions are described in the AST-2011-003 and AST-2011-004 security advisories. For more information about the details of these vulnerabilities, please read the security advisories AST-2011-003 and AST-2011-004, which were released at the same time as this announcement. For a full list of changes in the current releases, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.8.3.1 Security advisory AST-2011-003 and AST-2011-004 are available at: http://downloads.asterisk.org/pub/security/AST-2011-003.pdf http://downloads.asterisk.org/pub/security/AST-2011-004.pdf =========================================================================== 1.8.3: The Asterisk Development Team has announced the release of Asterisk 1.8.3. The release of Asterisk 1.8.3 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following is a sample of the issues resolved in this release: * Resolve duplicated data in the AstDB when using DIALGROUP() * Ensure the ipaddr field in realtime is large enough to handle IPv6 addresses. * Reworking parsing of mwi => lines to resolve a segfault. Also add a set of unit tests for the function that does the parsing. * When using cdr_pgsql the billsec field was not populated correctly on unanswered calls. * Resolve memory leak in iCalendar and Exchange calendaring modules. * This version of Asterisk includes the new Compiler Flags option BETTER_BACKTRACES which uses libbfd to search for better symbol information within both the Asterisk binary, as well as loaded modules, to assist when using inline backtraces to track down problems. * Resolve issue where no Music On Hold may be triggered when using res_timing_dahdi. * Resolve a memory leak when the Asterisk Manager Interface is disabled. * Reimplemented fax session reservation to reverse the ABI breakage introduced in r297486. * Fix regression that changed behavior of queues when ringing a queue member. * Resolve deadlock involving REFER. Additionally, this release has the changes related to security bulletin AST-2011-002 which can be found at http://downloads.asterisk.org/pub/security/AST-2011-002.pdf For a full list of changes in this release, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.3 =========================================================================== 1.8.2.4: The Asterisk Development Team has announced security releases for Asterisk branches 1.4, 1.6.1, 1.6.2, and 1.8. The available security releases are released as versions 1.4.39.2, 1.6.1.22, 1.6.2.16.2, and 1.8.2.4. The releases of Asterisk 1.4.39.2, 1.6.1.22, 1.6.2.16.2, and 1.8.2.4 resolve an issue that when decoding UDPTL packets, multiple stack and heap based arrays can be made to overflow by specially crafted packets. Systems configured for T.38 pass through or termination are vulnerable. The issue and resolution are described in the AST-2011-002 security advisory. For more information about the details of this vulnerability, please read the security advisory AST-2011-002, which was released at the same time as this announcement. For a full list of changes in the current release, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.8.2.4 Security advisory AST-2011-002 is available at: http://downloads.asterisk.org/pub/security/AST-2011-002.pdf
2011-06-06Upgrade to 1.6.2.18. This fixes several security issues including:jnemeth4-158/+44
AST-2011-002, AST-2011-003, AST-2011-004, AST-2011-005, and AST-2011-006. =========================================================================== 1.6.2.18: The Asterisk Development Team has announced the release of Asterisk 1.6.2.18. The release of Asterisk 1.6.2.18 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following is a sample of the issues resolved in this release: * Only offer codecs both sides support for directmedia. * Resolution of several DTMF based attended transfer issues. NOTE: Be sure to read the ChangeLog for more information about these changes. * Resolve deadlocks related to device states in chan_sip * Fix channel redirect out of MeetMe() and other issues with channel softhangup * Fix voicemail sequencing for file based storage. * Guard against retransmitting BYEs indefinitely during attended transfers with chan_sip. In addition to the changes listed above, commits to resolve security issues AST-2011-005 and AST-2011-006 have been merged into this release. More information about AST-2011-005 and AST-2011-006 can be found at: http://downloads.asterisk.org/pub/security/AST-2011-005.pdf http://downloads.asterisk.org/pub/security/AST-2011-006.pdf For a full list of changes in this release, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.6.2.18 =========================================================================== 1.6.2.17.3 The Asterisk Development Team has announced security releases for Asterisk branches 1.4, 1.6.1, 1.6.2, and 1.8. The available security releases are released as versions 1.4.40.1, 1.6.1.25, 1.6.2.17.3, and 1.8.3.3. The releases of Asterisk 1.4.40.1, 1.6.1.25, 1.6.2.17.3, and 1.8.3.3 resolve two issues: * File Descriptor Resource Exhaustion (AST-2011-005) * Asterisk Manager User Shell Access (AST-2011-006) The issues and resolutions are described in the AST-2011-005 and AST-2011-006 security advisories. For more information about the details of these vulnerabilities, please read the security advisories AST-2011-005 and AST-2011-006, which were released at the same time as this announcement. For a full list of changes in the current releases, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.6.2.17.3 Security advisory AST-2011-005 and AST-2011-006 are available at: http://downloads.asterisk.org/pub/security/AST-2011-005.pdf http://downloads.asterisk.org/pub/security/AST-2011-006.pdf =========================================================================== 1.6.2.17.2: The Asterisk Development Team has announced security releases for Asterisk branches 1.6.1, 1.6.2, and 1.8. The available security releases are released as versions 1.6.1.24, 1.6.2.17.2, and 1.8.3.2. ** This is a re-release of Asterisk 1.6.1.23, 1.6.2.17.1 and 1.8.3.1 which contained a bug which caused duplicate manager entries (issue #18987). The releases of Asterisk 1.6.1.24, 1.6.2.17.2, and 1.8.3.2 resolve two issues: * Resource exhaustion in Asterisk Manager Interface (AST-2011-003) * Remote crash vulnerability in TCP/TLS server (AST-2011-004) The issues and resolutions are described in the AST-2011-003 and AST-2011-004 security advisories. For more information about the details of these vulnerabilities, please read the security advisories AST-2011-003 and AST-2011-004, which were released at the same time as this announcement. For a full list of changes in the current releases, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.6.2.17.2 Security advisory AST-2011-003 and AST-2011-004 are available at: http://downloads.asterisk.org/pub/security/AST-2011-003.pdf http://downloads.asterisk.org/pub/security/AST-2011-004.pdf =========================================================================== 1.6.2.17.1: The Asterisk Development Team has announced security releases for Asterisk branches 1.6.1, 1.6.2, and 1.8. The available security releases are released as versions 1.6.1.23, 1.6.2.17.1, and 1.8.3.1. These releases are available for immediate download at http://downloads.asterisk.org/pub/telephony/asterisk/releases The releases of Asterisk 1.6.1.23, 1.6.2.17.1, and 1.8.3.1 resolve two issues: * Resource exhaustion in Asterisk Manager Interface (AST-2011-003) * Remote crash vulnerability in TCP/TLS server (AST-2011-004) The issues and resolutions are described in the AST-2011-003 and AST-2011-004 security advisories. For more information about the details of these vulnerabilities, please read the security advisories AST-2011-003 and AST-2011-004, which were released at the same time as this announcement. For a full list of changes in the current releases, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.6.2.17.1 Security advisory AST-2011-003 and AST-2011-004 are available at: http://downloads.asterisk.org/pub/security/AST-2011-003.pdf http://downloads.asterisk.org/pub/security/AST-2011-004.pdf =========================================================================== 1.6.2.16.2: The Asterisk Development Team has announced security releases for Asterisk branches 1.4, 1.6.1, 1.6.2, and 1.8. The available security releases are released as versions 1.4.39.2, 1.6.1.22, 1.6.2.16.2, and 1.8.2.4. The releases of Asterisk 1.4.39.2, 1.6.1.22, 1.6.2.16.2, and 1.8.2.4 resolve an issue that when decoding UDPTL packets, multiple stack and heap based arrays can be made to overflow by specially crafted packets. Systems configured for T.38 pass through or termination are vulnerable. The issue and resolution are described in the AST-2011-002 security advisory. For more information about the details of this vulnerability, please read the security advisory AST-2011-002, which was released at the same time as this announcement. For a full list of changes in the current release, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.6.2.16.2 Security advisory AST-2011-002 is available at: http://downloads.asterisk.org/pub/security/AST-2011-002.pdf
2011-06-06Upgrade to 1.6.2.18. This fixes several security issues including:jnemeth1-4/+2
AST-2011-002, AST-2011-003, AST-2011-004, AST-2011-005, and AST-2011-006. =========================================================================== 1.6.2.18: The Asterisk Development Team has announced the release of Asterisk 1.6.2.18. The release of Asterisk 1.6.2.18 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following is a sample of the issues resolved in this release: * Only offer codecs both sides support for directmedia. * Resolution of several DTMF based attended transfer issues. NOTE: Be sure to read the ChangeLog for more information about these changes. * Resolve deadlocks related to device states in chan_sip * Fix channel redirect out of MeetMe() and other issues with channel softhangup * Fix voicemail sequencing for file based storage. * Guard against retransmitting BYEs indefinitely during attended transfers with chan_sip. In addition to the changes listed above, commits to resolve security issues AST-2011-005 and AST-2011-006 have been merged into this release. More information about AST-2011-005 and AST-2011-006 can be found at: http://downloads.asterisk.org/pub/security/AST-2011-005.pdf http://downloads.asterisk.org/pub/security/AST-2011-006.pdf For a full list of changes in this release, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.6.2.18 =========================================================================== 1.6.2.17.3 The Asterisk Development Team has announced security releases for Asterisk branches 1.4, 1.6.1, 1.6.2, and 1.8. The available security releases are released as versions 1.4.40.1, 1.6.1.25, 1.6.2.17.3, and 1.8.3.3. The releases of Asterisk 1.4.40.1, 1.6.1.25, 1.6.2.17.3, and 1.8.3.3 resolve two issues: * File Descriptor Resource Exhaustion (AST-2011-005) * Asterisk Manager User Shell Access (AST-2011-006) The issues and resolutions are described in the AST-2011-005 and AST-2011-006 security advisories. For more information about the details of these vulnerabilities, please read the security advisories AST-2011-005 and AST-2011-006, which were released at the same time as this announcement. For a full list of changes in the current releases, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.6.2.17.3 Security advisory AST-2011-005 and AST-2011-006 are available at: http://downloads.asterisk.org/pub/security/AST-2011-005.pdf http://downloads.asterisk.org/pub/security/AST-2011-006.pdf =========================================================================== 1.6.2.17.2: The Asterisk Development Team has announced security releases for Asterisk branches 1.6.1, 1.6.2, and 1.8. The available security releases are released as versions 1.6.1.24, 1.6.2.17.2, and 1.8.3.2. ** This is a re-release of Asterisk 1.6.1.23, 1.6.2.17.1 and 1.8.3.1 which contained a bug which caused duplicate manager entries (issue #18987). The releases of Asterisk 1.6.1.24, 1.6.2.17.2, and 1.8.3.2 resolve two issues: * Resource exhaustion in Asterisk Manager Interface (AST-2011-003) * Remote crash vulnerability in TCP/TLS server (AST-2011-004) The issues and resolutions are described in the AST-2011-003 and AST-2011-004 security advisories. For more information about the details of these vulnerabilities, please read the security advisories AST-2011-003 and AST-2011-004, which were released at the same time as this announcement. For a full list of changes in the current releases, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.6.2.17.2 Security advisory AST-2011-003 and AST-2011-004 are available at: http://downloads.asterisk.org/pub/security/AST-2011-003.pdf http://downloads.asterisk.org/pub/security/AST-2011-004.pdf =========================================================================== 1.6.2.17.1: The Asterisk Development Team has announced security releases for Asterisk branches 1.6.1, 1.6.2, and 1.8. The available security releases are released as versions 1.6.1.23, 1.6.2.17.1, and 1.8.3.1. These releases are available for immediate download at http://downloads.asterisk.org/pub/telephony/asterisk/releases The releases of Asterisk 1.6.1.23, 1.6.2.17.1, and 1.8.3.1 resolve two issues: * Resource exhaustion in Asterisk Manager Interface (AST-2011-003) * Remote crash vulnerability in TCP/TLS server (AST-2011-004) The issues and resolutions are described in the AST-2011-003 and AST-2011-004 security advisories. For more information about the details of these vulnerabilities, please read the security advisories AST-2011-003 and AST-2011-004, which were released at the same time as this announcement. For a full list of changes in the current releases, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.6.2.17.1 Security advisory AST-2011-003 and AST-2011-004 are available at: http://downloads.asterisk.org/pub/security/AST-2011-003.pdf http://downloads.asterisk.org/pub/security/AST-2011-004.pdf =========================================================================== 1.6.2.17: The Asterisk Development Team has announced the release of Asterisk 1.6.2.17. The release of Asterisk 1.6.2.17 resolves several issues reported by the community and would have not been possible without your participation. The following is a sample of the issues resolved in this release: * Resolve duplicated data in the AstDB when using DIALGROUP() * Correct issue where res_config_odbc could populate fields with invalid data. * When using cdr_pgsql the billsec field was not populated correctly on unanswered calls. * Resolve issue where re-transmissions of SUBSCRIBE could break presence. * Fix regression causing forwarding voicemails to not work with file storage. * This version of Asterisk includes the new Compiler Flags option BETTER_BACKTRACES which uses libbfd to search for better symbol information within both the Asterisk binary, as well as loaded modules, to assist when using inline backtraces to track down problems. * Resolve several issues with DTMF based attended transfers. NOTE: Be sure to read the ChangeLog for more information about these changes. * Resolve issue where no Music On Hold may be triggered when using res_timing_dahdi. * Fix regression that changed behavior of queues when ringing a queue member. Additionally, this release has the changes related to security bulletin AST-2011-002 which can be found at http://downloads.asterisk.org/pub/security/AST-2011-002.pdf For a full list of changes in this release, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.6.2.17 =========================================================================== 1.6.2.16.2: The Asterisk Development Team has announced security releases for Asterisk branches 1.4, 1.6.1, 1.6.2, and 1.8. The available security releases are released as versions 1.4.39.2, 1.6.1.22, 1.6.2.16.2, and 1.8.2.4. The releases of Asterisk 1.4.39.2, 1.6.1.22, 1.6.2.16.2, and 1.8.2.4 resolve an issue that when decoding UDPTL packets, multiple stack and heap based arrays can be made to overflow by specially crafted packets. Systems configured for T.38 pass through or termination are vulnerable. The issue and resolution are described in the AST-2011-002 security advisory. For more information about the details of this vulnerability, please read the security advisory AST-2011-002, which was released at the same time as this announcement. For a full list of changes in the current release, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.6.2.16.2 Security advisory AST-2011-002 is available at: http://downloads.asterisk.org/pub/security/AST-2011-002.pdf =============================================================================
2011-05-19* Change MASTER_SITES subdir to simple usual one.obache1-3/+3
* fix DEPENDS pattern, need to surround {} for multiple pkgname pattern.
2011-05-18add and enable several perl modules needed to support databases/koha. PR ↵dmcmahill1-1/+2
pkg/43929
2011-05-17Initial import of comms/p5-SMS-Send version 0.05dmcmahill3-0/+40
This package was submited as part of PR pkg/43929 which adds the Koha Integrated Library System submitted by Edgar Fuß ------------------------------------- SMS::Send is intended to provide a driver-based single API for sending SMS and MMS messages. The intent is to provide a single API against which to write the code to send an SMS message. At the same time, the intent is to remove the limits of some of the previous attempts at this sort of API, like "must be free internet-based SMS services". SMS::Send drivers are installed seperately, and might use the web, email or physical SMS hardware. It could be a free or paid. The details shouldn't matter. You should not have to care how it is actually sent, only that it has been sent (although some drivers may not be able to provide certainty).
2011-05-14Fix build on SunOS.hans4-8/+48
2011-04-28Let not to change DIST_SUBDIR after bump PKGREVISION to 2.obache1-2/+2
PR#44914.
2011-04-22recursive bump from gettext-lib shlib bump.obache24-39/+48
2011-04-16move PKG_DESTDIR_SUPPORT and LICENSE to usual location.obache1-3/+4
2011-04-16Remove unwanted empty PKGREVISION.obache1-2/+1
2011-04-07format policeis1-2/+3
2011-04-07DESTDIRize.is1-1/+3
2011-04-06Update to 1.1.37is4-32/+32
2011-04-06License is GPL V2. Hinted in Readme.1st, verified with author. (COPYINGis1-1/+2
is missing in the top level directory, but available in ../x11/viewfax/ and ../tcl/faxview/. COPYING is available in 1.1.37 (TODO: upgrade).
2011-04-05PKG_DESTDIR_SUPPORT=destdiris1-9/+10
2011-03-31Bump revision.is1-2/+2
2011-03-31Point LICENSE to estic-license, remove RESTRICTIONS according to it, asis1-9/+2
discussed with gdt@ and martin@.
2011-03-14update master_sites. ftp service has been suspended.zafer1-2/+2
2011-03-14revert. was temporary unavailable.zafer1-2/+2
2011-03-11service discontinued (> 2 years ago). prevent time out. fetch from ↵zafer1-2/+2
master_sites_backup.
2011-02-28Reset maintainer for retired developers.wiz2-4/+4
2011-02-21Bump PKGREVISION due to ABI change of ruby18-base.taca1-1/+2
2011-02-10+ spandsp.wiz1-1/+2
2011-02-06SpanDSP is a library of DSP functions for telephony, in the 8000jnemeth7-0/+251
sample per second world of E1s, T1s, and higher order PCM channels. It contains low level functions, such as basic filters. It also contains higher level functions, such as cadenced supervisory tone detection, and a complete software FAX machine. The software has been designed to avoid intellectual property issues, using mature techniques where all relevant patents have expired. See the file DueDiligence for important information about these intellectual property issues.
2011-02-06Add a spandsp option which pulls in comms/spandsp and links against itjnemeth2-4/+13
to enable res_fax_spandsp.so. Don't bother with a PKGREVISION bump since this doesn't change default builds and there is no need tobother people that don't need the option.
2011-01-29Added a comment that the issue these patches fix (mainly adding supportjnemeth6-11/+21
for NetBSD style atomic ops) has been reported upstream. No change to binary package, so no REVISION bump.
2011-01-28Bah! Upstream changed a couple of text files in the distro tarballjnemeth2-15/+18
without cranking the version number.
2011-01-27Update to 1.8.2.3 -- bug fix release to fix a FAX issuejnemeth3-18/+18
pkgsrc: fix issue with patch for detecting sys/atomic.h The Asterisk Development Team has announced the release of Asterisk 1.8.2.3. The release of Asterisk 1.8.2.3 resolves the following issue: * Reimplemented fax session reservation to reverse the ABI breakage introduced in r297486. (Reported by Jeremy Kister on the asterisk-users mailing list. Patched by mnicholson) For a full list of changes in this release, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.2.3
2011-01-21Update to 1.8.2.2jnemeth2-15/+15
This is to fix AST-2011-001: Stack buffer overflow in SIP channel driver Asterisk Project Security Advisory - AST-2011-001 Product Asterisk Summary Stack buffer overflow in SIP channel driver Nature of Advisory Exploitable Stack Buffer Overflow Susceptibility Remote Authenticated Sessions Severity Moderate Exploits Known No Reported On January 11, 2011 Reported By Matthew Nicholson Posted On January 18, 2011 Last Updated On January 18, 2011 Advisory Contact Matthew Nicholson <mnicholson at digium.com> CVE Name Description When forming an outgoing SIP request while in pedantic mode, a stack buffer can be made to overflow if supplied with carefully crafted caller ID information. This vulnerability also affects the URIENCODE dialplan function and in some versions of asterisk, the AGI dialplan application as well. The ast_uri_encode function does not properly respect the size of its output buffer and can write past the end of it when encoding URIs. For full details, see: http://downloads.digium.com/pub/security/AST-2011-001.html
2011-01-21Update to 1.6.2.16.1jnemeth2-15/+15
This is to fix AST-2011-001: Stack buffer overflow in SIP channel driver Asterisk Project Security Advisory - AST-2011-001 Product Asterisk Summary Stack buffer overflow in SIP channel driver Nature of Advisory Exploitable Stack Buffer Overflow Susceptibility Remote Authenticated Sessions Severity Moderate Exploits Known No Reported On January 11, 2011 Reported By Matthew Nicholson Posted On January 18, 2011 Last Updated On January 18, 2011 Advisory Contact Matthew Nicholson <mnicholson at digium.com> CVE Name Description When forming an outgoing SIP request while in pedantic mode, a stack buffer can be made to overflow if supplied with carefully crafted caller ID information. This vulnerability also affects the URIENCODE dialplan function and in some versions of asterisk, the AGI dialplan application as well. The ast_uri_encode function does not properly respect the size of its output buffer and can write past the end of it when encoding URIs. For full details, see: http://downloads.digium.com/pub/security/AST-2011-001.html
2011-01-16Update to 1.8.2:jnemeth3-31/+160
The release of Asterisk 1.8.2 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following is a sample of the issues resolved in this release: * 'sip notify clear-mwi' needs terminating CRLF. (Closes issue #18275. Reported, patched by klaus3000) * Patch for deadlock from ordering issue between channel/queue locks in app_queue (set_queue_variables). (Closes issue #18031. Reported by rain. Patched by bbryant) * Fix cache of device state changes for multiple servers. (Closes issue #18284, #18280. Reported, tested by klaus3000. Patched, tested by russellb) * Resolve issue where channel redirect function (CLI or AMI) hangs up the call instead of redirecting the call. (Closes issue #18171. Reported by: SantaFox) (Closes issue #18185. Reported by: kwemheuer) (Closes issue #18211. Reported by: zahir_koradia) (Closes issue #18230. Reported by: vmarrone) (Closes issue #18299. Reported by: mbrevda) (Closes issue #18322. Reported by: nerbos) * Fix reloading of peer when a user is requested. Prevent peer reloading from causing multiple MWI subscriptions to be created when using realtime. (Closes issue #18342. Reported, patched by nivek.) * Fix XMPP PubSub-based distributed device state. Initialize pubsubflags to 0 so res_jabber doesn't think there is already an XMPP connection sending device state. Also clean up CLI commands a bit. (Closes issue #18272. Reported by klaus3000. Patched by Marquis42) * Don't crash after Set(CDR(userfield)=...) in ast_bridge_call. Instead of setting peer->cdr = NULL, set it to not post. (Closes issue #18415. Reported by macbrody. Patched, tested by jsolares) * Fixes issue with outbound google voice calls not working. Thanks to az1234 and nevermind_quack for their input in helping debug the issue. (Closes issue #18412. Reported by nevermind_quack. Patched by dvossel) For a full list of changes in this release, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.2
2011-01-16Update to 1.6.2.16:jnemeth3-30/+159
The release of Asterisk 1.6.2.16 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following is a sample of the issues resolved in this release: * Fix cache of device state changes for multiple servers. (Closes issue #18284, #18280. Reported, tested by klaus3000. Patched, tested by russellb) * Resolve issue where channel redirect function (CLI or AMI) hangs up the call instead of redirecting the call. (Closes issue #18171. Reported by: SantaFox) (Closes issue #18185. Reported by: kwemheuer) (Closes issue #18211. Reported by: zahir_koradia) (Closes issue #18230. Reported by: vmarrone) (Closes issue #18299. Reported by: mbrevda) (Closes issue #18322. Reported by: nerbos) * Linux and *BSD disagree on the elements within the ucred structure. Detect which one is in use on the system. (Closes issue #18384. Reported, patched, tested by bjm, tilghman) * app_followme: Don't create a Local channel if the target extension does not exist. (Closes issue #18126. Reported, patched by junky) * Revert code that changed SSRC for DTMF. (Closes issue #17404, #18189, #18352. Reported by sdolloff, marcbou. rsw686. Tested by cmbaker82) * Resolve issue where REGISTER request with a Call-ID matching an existing transaction is received it was possible that the REGISTER request would overwrite the initreq of the private structure. (Closes issue #18051. Reported by eeman. Patched, tested by twilson) For a full list of changes in this release, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.6.2.16
2011-01-13png shlib name changed for png>=1.5.0, so bump PKGREVISIONs.wiz11-22/+22
2011-01-13Update HOMEPAGE and MASTER_SITES.obache1-3/+3
2011-01-06treat DragonFly same as other *BSD.obache2-1/+15
2010-12-30Add a workaround for DragonFly arpa/telnet.h.obache2-1/+19
2010-12-30Include <stdlib.h> not only NetBSD.obache4-21/+15
It already included unconditionally with other patches, and fixes build failure on other platforms.
2010-12-23Mechanically replace references to graphics/jpeg with the suitabledsainty2-4/+4
alternative from mk/jpeg.buildlink3.mk This allows selection of an alternative jpeg library (namely the x86 MMX, SSE, SSE2 accelerated libjpeg-turbo) via JPEG_DEFAULT=libjpeg-turbo, and follows the current standard model for alternatives (fam, motif, fuse etc). The mechanical edits were applied via the following script: #!/bin/sh for d in */*; do [ -d "$d" ] || continue for i in "$d/"Makefile* "$d/"*.mk; do case "$i" in *.orig|*"*"*) continue;; esac out="$d/x" sed -e 's;graphics/jpeg/buildlink3\.mk;mk/jpeg.buildlink3.mk;g' \ -e 's;BUILDLINK_PREFIX\.jpeg;JPEGBASE;g' \ < "$i" > "$out" if cmp -s "$i" "$out"; then rm -f "$out" else echo "Edited $i" mv -f "$i" "$i.orig" && mv "$out" "$i" fi done done
2010-12-22fix pasto in a DragonFly BSD support patchjnemeth2-4/+4
2010-12-22PR/44257 - Francois Tigeot -- build fixes for DragonFly BSDjnemeth10-5/+144
Don't bother bumping the version since it didn't build on DFBSD before there is no binary package that could have changed, and this doesn't change the binary packages on other systems.
2010-12-20flag cel_odbc.so as only being installed when unixodbc option is selectedjnemeth1-2/+2
2010-12-17Update to 1.8.1.1. This is a minor bugfix update.jnemeth2-15/+15
The release of Asterisk 1.8.1.1 resolves two issues reported by the community since the release of Asterisk 1.8.1. * Don't crash after Set(CDR(userfield)=...) in ast_bridge_call. Instead of setting peer->cdr = NULL, set it to not post. (Closes issue #18415. Reported by macbrody. Patched, tested by jsolares) * Fixes issue with outbound google voice calls not working. Thanks to az1234 and nevermind_quack for their input in helping debug the issue. (Closes issue #18412. Reported by nevermind_quack. Patched by dvossel) For a full list of changes in this release candidate, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.1.1
2010-12-15add and enable asterisk18jnemeth1-1/+2
2010-12-15 Import Asterisk 1.8.1:jnemeth30-0/+3634
Asterisk is a complete PBX in software. It provides all of the features you would expect from a PBX and more. Asterisk does voice over IP in three protocols, and can interoperate with almost all standards-based telephony equipment using relatively inexpensive hardware. Asterisk 1.8 is a long term support version (i.e. it will be supported for four years with an additional year of security only fixes). See: https://wiki.asterisk.org/wiki/display/AST/Asterisk+Versions What's new: Asterisk 1.8 is the next major release series of Asterisk. The release of Asterisk 1.8.0 would not have been possible without the support and contributions of the community. Since Asterisk 1.6.2, we've had over 500 reporters, more than 300 testers and greater than 200 developers contributed to this release. You can find a summary of the work involved with the 1.8.0 release in the sumary: http://svn.asterisk.org/svn/asterisk/tags/1.8.0/asterisk-1.8.0-summary.txt A short list of available features includes: * Secure RTP * IPv6 Support in the SIP channel driver * Connected Party Identification Support * Calendaring Integration * A new call logging system, Channel Event Logging (CEL) * Distributed Device State using Jabber/XMPP PubSub * Call Completion Supplementary Services support * Advice of Charge support * Much, much more! A full list of new features can be found in the CHANGES file. http://svn.digium.com/view/asterisk/branches/1.8/CHANGES?view=markup For a full list of changes in the current release candidate, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.0 ----- The Asterisk Development Team has announced the release of Asterisk 1.8.1. The release of Asterisk 1.8.1 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following is a sample of the issues resolved in this release: * Fix issue when using directmedia. Asterisk needs to limit the codecs offered to just the ones that both sides recognize, otherwise they may end up sending audio that the other side doesn't understand. (Closes issue #17403. Reported, patched by one47. Tested by one47, falves11) * Resolve issue where Party A in an analog 3-way call would continue to hear ringback after party C answers. (Patched by rmudgett) * Fix playback failure when using IAX with the timerfd module. (Closes issue #18110. Reported, tested by tpanton. Patched by jpeeler) * Fix problem with qualify option packets for realtime peers never stopping. The option packets not only never stopped, but if a realtime peer was not in the peer list multiple options dialogs could accumulate over time. (Closes issue #16382. Reported by lftsy. Tested by zerohalo. Patched by jpeeler) * Fix issue where it is possible to crash Asterisk by feeding the curl engine invalid data. (Closes issue #18161. Reported by wdoekes. Patched by tilghman) For a full list of changes in this release, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.1
2010-12-12Update to 1.6.2.15. This is primarily a bugfix release.jnemeth5-170/+45
- disable automatic Lua detection for now until lang/lua/builtin.mk exists The release of Asterisk 1.6.2.15 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following is a sample of the issues resolved in this release: * When using chan_skinny, don't crash when parking a non-bridged call. (Closes issue #17680. Reported, tested by jmhunter. Patched, tested by DEA) * Add ability for Asterisk to try both the encoded and unencoded subscription URI for a match in hints. (Closes issue #17785. Reported, tested by ramonpeek. Patched by tilghman) * Set the caller id on CDRs when it is set on the parent channel. (Closes issue #17569. Reported, patched by tbelder) * Ensure user portion of SIP URI matches dialplan when using encoded characters (Closes issue #17892. Reported by wdoekes. Patched by jpeeler) * Resolve issue where Party A in an analog 3-way call would continue to hear ringback after party C answers. (Patched by rmudgett) * Fix problem with qualify option packets for realtime peers never stopping. The option packets not only never stopped, but if a realtime peer was not in the peer list multiple options dialogs could accumulate over time. (Closes issue #16382. Reported by lftsy. Tested by zerohalo. Patched by jpeeler) * Multiple fixes related to Local channels. For a full list of changes in this release, please see the ChangeLog: http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.6.2.15
2010-12-06ftp.conserver.com re-directs to a machine that does not run an ftphauke1-4/+5
server, so fetch the sources via http. Sort out pkg version, while we are here.
2010-12-05Updating conserver 8 to v8.18hauke3-22/+8
version 8.1.18 (Nov 11, 2010): - install man pages read-only and improved the contributed redhat init script - patches by Eric Biederman <ebiederm@aristanetworks.com> - spec file improvements in contrib/redhat-rpm - patch by Jodok Ole Muellers <jodok.muellers@aschendorff.de> - GSS-API patch for client code - patch by Andras Horvath <Andras.Horvath@cern.ch> version 8.1.17 (Sep 29, 2009): - fix for interface detection when HAVE_SA_LEN is defined - first detected on NetBSD 5.0 and patched by Chris Ross <cross+conserver@distal.com> - first person to connect to a console wanting read/write now gets it once the active user drops read/write - suggested by Thomas Gardner <tmg@pobox.com> - fix typo when setting nonblocking socket for client connections, fixing stall issues - patch by Eric Biederman <ebiederm@aristanetworks.com> - GSS-API patch (--with-gssapi) to help with Kerberos tokens - patch by Nate Straz <nstraz@redhat.com> - authenticate username without @REALM when using GSS-API (--with-striprealm) - based on patch by Andras Horvath <Andras.Horvath@cern.ch> - various contrib/redhat-rpm fixes - patch by Fabien Wernli <wernli@in2p3.fr> - fix handling of read(stdin) returning -1 in console client - patch by Ed Swierk <eswierk@arastra.com> patch-ac has been included upstream.
2010-12-02Update to 1.56:wiz2-6/+6
1.56 Mon Nov 15 21:00:00 CET 2010 - When sending messages in text mode, now we wait a bit between the +CMSG command and the actual text. Fixes RT #61729. Thanks to Boris Ivanov for the report. - Added clear example of logging to a custom file - Added a warning for not implemented _read_messages_text() - Added a "assume_registered" option to skip GSM network registration on buggy/problematic devices.
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-21 15:20:25 +0000