|
libgphoto2 2.5.8 release
all:
* Missing COPYRIGHT headers added.
* Bug fixes for issues detected by Coverity.
ptp2:
* Canon Powershot/IXUS CHDK support
Install the CHDK firmware and then use "gphoto2 --set-config chdk=On" to enable.
* Canon EOS: Implemented new capture method for new Canon EOS to avoid hangs.
* Canon EOS: New configuration variable: continuousaf
* Canon EOS: event output for focusinfo / focusmask
* Nikon DSLR: New configuration variables: movieiso, movieshutterspeed, moviehighisonr
* Nikon Coolpix A: also manually add override opcodes for capture (please report if it works)
* New USB ids:
Sony: DSC-HX60V, Alpha-A7S, Alpha-A77 M2, Alpha A5100
Panasonic: DMC-LS2
Canon EOS 7D Mark II, Canon EOS M3
Canon Powershot SX520 HS
Fuji Fujifilm X-E2
Samsung NX1
* Media Player IDs synced with the libmtp ID database.
* Lots of bugfixes.
libgphoto2_port/libusb1:
* Prefer libusb1 over libusb0 if both are present.
* Asynchronous interrupt handling, to avoid losing usb interrupts during other
operations.
------------------------------------------------------------------------------
libgphoto2 2.5.7 release
ptp2:
* Canon EOS focusinfo crash fixed (affected all config operations)
* wait_for_event sleep backoff increased (50 - 100 - 150 - 200ms)
* Nikon: fixes to make Nikon Coolpix S9700 over PTPIP work better
* Nikon: WLAN GUID setting
* Sony: tighten event loop to avoid loss of objectadded events
* New USB ids: Nikon Coolpix 9400, Nikon S9700, Pentax K3 (in PTP).
pentax:
* added Pentax K100Ds
* added raw capture support
packaging:
* fixed missing libexif in pkgconfig
translations:
* updated ukrainian, vietnamese, french, polish
------------------------------------------------------------------------------
libgphoto2 2.5.6 release
ptp2:
* Nikon D3000/D3100/D3200: It hides the "good" capture opcodes from the
DeviceInfo. Override and add them. If you see capture bugs, please report
with debuglogfile.
* "exposurecompensation" now in correct size (-3.0 <-> 3.0 usually)
* Canon EOS: decode and report "focusinfo" variable that outputs the focus information of the camera.
* Canon EOS: autofocusdrive=0 and cancelautofocus=1 added to cancel autofocusing,
to avoid blocking the camera.
* Canon EOS: "eosviewfinder" renamed to "viewfinder"
* Sony SLT: Make property setting work for "iso", "exposurecompensation",
"f-number", "shutterspeed"
* Canon EOS: crash on 700D fixed
* Nikon DSLR: race condition on object addition handled better
* Nikon DSLR: make sure we make a pause a bit during polling after capture.
* IDs added:
Nikon: Coolpix P7800, S1, J4
Nikon: D3300, D610, D4s, D810, D750
Canon: IXUS 125HS, PowerShot Elph340HS
Leica M9
* various bugfixes
libgphoto2_port/usb1:
* fixed a memory leak
* api changed for gp_log_data to make smaller debuglogs possible
------------------------------------------------------------------------------
libgphoto2 2.5.5.1 release
This is a regression fix release.
ptp2:
* fixed all Nikon S* coolpix that are not Nikon 1
* Nikon: exit from potential endless loop on trigger capture
canon:
* On EOS/Rebel DSLR do not query or set "zoom" as its manual always
translations:
* updated polish, ukrainian, vietnamese
------------------------------------------------------------------------------
libgphoto2 2.5.5 release
ptp2:
* Nikon 1 support. Final fix to get it running by Raj Kumar of archive.org.
* Nikon: liveview capture without autofocus enhanced, now also for card
* Nikon: restart liveview after capture
* Canon EOS: New property reporting method (OLC Info) implemented.
* Print read-only values in configuration table lookup (for Canon EOS mostly)
* Sony: Fixed Sony SLT-A900v capture
* Fixed the various "datetime" hooks for PTP generic, Canon Powershot and Canon EOS
to hopefully work better. --set-config datetime=now sets the camera to the current time.
* CHDK: some changes
* New ids:
Nikon DSC D3x, D5300
Nikon Coolpix P330
Canon PowerShot S95, S120, SX260HS, SX280HS, SX160IS, A2500, A2600, Elph135, IXUS 300HS, IXUS 255HS
Canon EOS 1200D
Sony DSC-A900, Alpha 6000, DSC-HX5V
Casio EX-ZR700,
Fuji FinePix AV-150, T200
* Massive logging and error handling cleanup by Axel Waggershauser
* cleanup of the USB data handling
* Bugfixes
st2205:
* add support for a new type of 240x320 picture frames
all:
* Massive logging and error handling cleanup by Axel Waggershauser.
* Various cleanups from David Berrange for mingw32 builds.
* fixed libgd detection and linking.
print-camera-list
* add a mode to print udev rules for the non-standard USB support (usbscsi/usbdisk),
needed additional to HWDB databases.
translations:
* updated ukrainian, vietnamese, polish, french, finish, chinese, danish, dutch,
------------------------------------------------------------------------------
libgphoto2 2.5.4 release
ptp2:
* Sony SLT DSLR support: SDRAM capture, Tethering, Triggering movie capture, property reading
* Nikon DSLR: bulb mode implemented in newer DSLRs (D600/D7100/D5200 and later)
* Nikon capture adjustments (always set controlmode before capture).
* Nikon capture in "live view mode" no longer does autofocus, use "autofocusdrive".
* Nikon "applicationmode" setting added.
* Nikon Coolpix capture failure on empty cards fixed.
* Some Canon EOS 5D Mark III config adjustments/additions.
* Canon EOS: enable trigger capture
* Olympus E-series capture: some improvements.
* ptp2: implemented device property description caching
* New IDs
- Sony DSC-W510, SLT-A58 (control)
- Nikon P80 v1.1
- Canon A3500IS, A1400, SX170IS, SX510HS, A2200
- Fuji FinePix S4850, JX370, S4850
- Apple iPhone 5
ax203:
* support for picture frame with id 1.
sierra:
* Reimplemented a libusb based mass storage tunneling driver to support
non-Linux systems (e.g. Mac OS X).
libusb1:
* fixed timeout detection for USB interrupts
all:
* Lots of small fixes to build with mingw32.
Translations updates:
* Danish, Spanish, French, Dutch, Polish, Russian, Serbian, Ukrainian,
Vietnamese
------------------------------------------------------------------------------
libgphoto2 2.5.3.1 release
packaging:
* "print-camera-list hwdb" output mode added for udev versions >= 201.
Put this to /usr/lib/udev/hwdb/20-gphoto.hwdb (your udev hwdb directory might be different)
Added a missing "i" in the PTP matcher.
------------------------------------------------------------------------------
libgphoto2 2.5.3 release
packaging:
* "print-camera-list hwdb" output mode added for udev versions >= 201.
Put this to /usr/lib/udev/hwdb/20-gphoto.hwdb (your udev hwdb directory might be different)
* "print-camera-list html" output mode added for http://gphoto.org/proj/libgphoto2/support.php
all:
* Lots of Coverity fixes merged
ptp2:
* Nikon: added a new PTP capture opcode function, allows capture to card during liveview
* Nikon: rewrote some of the wait logic in the capture routines
* Nikon: enable --trigger-capture support
* Nikon: hook up some more configuration variables (funcbutton, previewbutton, menusandplayback, changeafarea)
* canon: hook up configuration variables (colortemperature)
* ptpip: several contributed bugfixes, and event handling
* panasonic: allow deleting files by setting MTP Responder code.
* new ids:
* Kodak Z8612 IS
* Sony DSC-S780, SLT-A57, SLT-A58, SLT-A99v, DSC-RX100M2, Alpha A3000, NEX 6
* Nikon Coolpix S3200, DSLR D3200, J3, V2, S02, 2200v1.1, S4300, S2700, L27, S02, V2, J3
* Panasonic TZ-8
* Olympus E-M5
* Canon Rebel G15, EOS 70D, A1000IS, SX150IS, A810
* Canon Rebel T3, EOS 1Dx, EOS 70D
* Fuji FinePix SL1000, S2980
* merged ids from libmtp
* lots of bugfixes
canon:
* label PowerShot S110 from 2001 differently than the 2012 PowerShot S110.
* fixed "new / downloaded" logic
* disable unconditional "clear halt" calls as they confuse newer controllers
ax203:
* support Nantronics N25S80 chipset
directory:
* support NRW files
sierra:
* capture fixed for Olympus C-3030
pentax:
* Various fixes from Jiri Pinka
jd11:
* enhanced de-bayering a bit
translations:
* new czech translation by Pavel Borecki.
* updated czech, danish, dutch, polish, russian, seribian, ukrainian,
french, vietnamese, taiwanese
libgphoto2:
* use generic macros to check for libGD and libxml2 to allow better handling.
libgphoto2_port/disk:
* check the right fstab field for ignoring filesystems (avoids autofs scans)
------------------------------------------------------------------------------
libgphoto2 2.5.2 release
ptp2:
* Fixed Raspberry Pi and USB 3.0 "connect only once" problem.
* Experimental Olympus E-series (not Pen) remote control support. Try in "Control" mode.
* Nikon DSLR: real movie capture! (use --set-config movie=1/0 and --wait-event)
* New ids:
Sony: DSC-A900, SLT-A350, DSC-RX1, HX300, NEX-3N
Nikon Coolpix: P80, L820, S9500, S620, P520, S2500, S2600
Nikon Coolpix A
Nikon DSLR: D2Xs, D4, D7100
Nikon J2
Canon Powershot: S100, A1300IS, A2300IS,
Canon EOS: 700D, 100D
Fuji FinePix: H20EXR, X20
Samsung: NX1000, EK-GC100
Also various MTP device ids merged from libmtp.
* ptpip: major/minor number was switched in init packet.
* Nikon DSLR: out of focus during capture fixed, various bugfixes
* Nikon "controlmode" config for unlocking the camera.
* Canon DSLR: "keepdeviceon" pinging in get_config, liveview
* Canon thumbnail retrieval fixed.
* Lots of work on getting Olympus E-series DSLRs in Control mode
to run.
canon:
* wait-for-event: handle when camera goes offline during waiting.
* fixed mtime 0 (Jan 1 1970) issue when downloading files and using --filename
sierra:
* Fixed the Nikon Coolpix 4300 and 2500 USB over SCSI capture mode.
* Ignore register 4 read errors after capture as Nikon does not supply them.
* added commented code on how to switch the Coolpix 2500 to RAW DIAG mode.
libgphoto2_port:
* gp_port_reset functionality to do a port reset.
libgphoto2_port/usbscsi:
* Use timeout supplied by driver, not hardcoded 1.5 seconds (fixes Nikon sierra capture).
translations:
* updated ukrainian, finish, dutch, polish, russian, french, vietnamese, german
build:
* specify lots of _BSD_SOURCE et.al. to make the strict MacOS ports
build happier. Might break non Linux platforms, please report this.
* libxml2 needed for Olympus E series capture support.
* cleaned up AM_CPPFLAGS/CPPFLAGS usage, do not use both of them together.
------------------------------------------------------------------------------
libgphoto2 2.5.1.1 release
ptp2:
* fixed 32bit architectures
------------------------------------------------------------------------------
libgphoto2 2.5.1 release
translations updates
* lots of translations synced to 2.5.0 release
ptp2:
* Lots of new USB ids added
- Sony RX100, SLT-A65V, HX200V
- Nikon Coolpix S01, S3300, P7700, S8200, P510, J1
- Nikon DSLR D600, D800E, D800, D5200
- Panasonic DMC LX7
- Olympus SP-720UZ, E-PL5
- Canon PowerShot D10, IXUS 310IS, SX220HS, G1 X, SX40HS,
A4000IS, SX240HS, A2400IS, S110, SX500IS
- Canon EOS M, EOS 650D, EOS 6D
- Fuji FinePix S2950, S4300, X-S1, HS30EXR, XF1
* wait-for-event also for Canon PowerShot (capture capable ones)
now waits for "shutter press" signal and triggers a capture.
* Canon Powershot Preview mode fixes
* various Nikon configurations added: angle, flickerreduction,
rawcompression, remotemode.
* Nikon DSLR to-ram capture fixes
* merged music player ids from libmtp. Includes big Samsung devices rename.
* EOS preview capture bugfixes: some waiting reduced to allow higher
preview / regular capture speed on Canon EOS, understand newer EOS.
* some more bug fixes
ax203:
* SST25VF080 and SST25VF016 support added.
* ax206 support enhanced.
canon:
* decode "zoom" settings better
* "shootingmode" fix
libgphoto2_port/libusb1:
* bugfixes
examples:
* focus.c, sample-justfocus.c: focusing example added
------------------------------------------------------------------------------
libgphoto2 2.5.0 release
libgphoto2 API:
* gp_context* functions no longer get varargs, but preprocessed
strings. This makes hooking them into other language bindings
easier.
* gp_file_new_from_handler(): Allow passing data in and out via
handler functions (to allow streaming). See also CameraFileHandler
function pointers.
* CameraFileInfoFile: removed "name" structmember and GP_FILE_INFO_NAME
flags.
Use direct passing in of the filename to the API functions.
* New: gp_camera_autodetect(CameraList *list, GPContext*);
Simple autodetection function returning all current detected cameras.
* (TODO: not yet New: gp_camera_open (Camera *camera, const char *name, const char *port, GPContext *context);
Simple open function without needing to involve libgphoto2_port.
)
* gp_file_set_name() and _get_name() passing in is no longer needed
and the API will go away.
* New gp_file_get_name_by_type() will convert a regular filename ("normal")
into one depending on type (e.g. "raw_" prefix) and adjusted suffix
(like ".ppm" turning into ".pgm" for grayscale previews).
* gp_file_set_type() and gp_file_get_type() are gone, these functions
are now implicit passed via arguments to the the put_file and
set_file_noop() functions.
* gp_filesystem_set_info_noop(), gp_filesystem_set_file_noop(),
gp_filesystem_put_file(), gp_camera_folder_put_file():
Added "filename" argument to pass in the filename. The one
from CameraFileInfoFile and CameraFile are no longer used.
Added "type" argument to pass in the filetype (GP_FILE_TYPE_*).
* Adjusted to new GPPortInfo handling.
* Rewrote gphoto2-filesys.c to be directory based (in a tree structure).
Change should not be visibile outside of gphoto2-filesys.c.
libgphoto2_port API:
* GPPortInfo is now abstracted and internal.
If you need to retrieve name, path or type, use
gp_port_info_get_xx (info, &x);
to get the value.
Name and path strings continue to be owned by libgphoto2_port,
do not modify and do not free.
You are not supposed to create / append new ones to GPPortInfoList.
* Disk Settings have been removed from the Settings union. Should
not affect frontends at all.
* Started using symbol versions.
PTP2 driver:
* Lots of improvements.
* PTP Object management rewritten, able to do "on demand" loading.
Directory driver:
* Use GPPortInfo instead of settings to pass basepath in.
* Abstracted common functionality.
Build:
* Removed dummy README file from SVN.
* Ship README.packaging in dist tarball for the first time.
* Allow building "all plus non-default" camlibs.
* Fix libltdl test compile for cases with LDFLAGS defined.
Documentation:
* Optionally (--enable-internal-docs) build internal doxygen docs
with call graphs and all the dirty details.
* Improved docs on how to selectively build camlibs.
Test cases:
* Test camlib loading of both uninstalled and installed camlibs.
|
